Fabricator jobs in South Dakota - 95 jobs

Sheet Metal Fabricators will apply their sheet metal skills and knowledge to fabricate for residential and commercial HVAC job applications Essential Functions: Forming, cutting, and bending metal to create fabricated units accurately. Welding and insulating assemblies in a safe and efficient manner. Performing additional production and warehouse duties as needed in the production process. Qualifications: Knowledge of manufacturing, fabrication, and general shop processes. Ability to perform basic arithmetic: addition, subtraction, multiplication, and division with whole numbers, common fractions, and decimals. Experience with sheet metal shearing is a plus. Familiarity with press brakes is a plus. Forklift experience is a plus. Ability to read blueprints and use a tape measure. Supervisory Responsibility: This position has no supervisory responsibilities. Work Environment: This position operates in a typical warehouse environment, offering a pleasant and safe working atmosphere. However, it may involve occasional exposure to extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors, and loud noises. Physical Effort: The role requires the ability to lift up to 75 lbs. and push/pull up to 150 lbs. Candidates must be able to stand for long periods and perform bending and kneeling on a daily basis. Expected Hours of Work: This is a full-time position, requiring 40 hours per week. Other Duties: Please note that this job description is not intended to be a comprehensive listing of all activities, duties, or responsibilities required for this position. Duties, responsibilities, and activities may change at any time with or without notice. Job Type: Full-time Work Location: In person #hc186898

Sunoco LP is a leading energy infrastructure and fuel distribution master limited partnership operating across 47 U.S. states, Puerto Rico, Europe, and Mexico. The Partnership's midstream operations include an extensive network of approximately 9,500 miles of pipeline and over 100 terminals. This critical infrastructure complements the Partnership's fuel distribution operations, which serve approximately 10,000 convenience stores, independent dealers, commercial customers, and distributors. At Sunoco, we take great pride in what we do and wholeheartedly believe our employees drive success for our company and our customers. We are always looking for the best and brightest talent and we are committed to making your job a challenging and rewarding experience. Position Summary: This position is subject to pre-employment and random DOT drug testing. The Pipeline Welder Trainee is responsible for performing certified pipeline welding duties, shop welding and fabrication, as well as other non-welding tasks related to general pipeline maintenance and repair. This role requires a strong focus on safety, quality, and adherence to industry and company standards. Major Accountabilities: * Perform welding activities related to the repair and maintenance of pipeline and facility assets, ensuring welds meet visual and NDE inspection standards. * Safely operate welding truck and equipment, traveling between job sites on various road types. * Operate hand tools and welding equipment, including beveling machines, torches, grinders, and other related tools. * Carry out pipeline maintenance tasks, including line locating, exposing pipe, lifting and transporting materials, coating application/removal, pipe surface preparation, and general maintenance. * Respond to high-priority and emergency situations, minimizing risks to personnel, public safety, and the environment. * Maintain company tools, equipment, and materials, ensuring proper storage, cleanliness, and safe operation. * Support pipeline/terminal welding and maintenance activities by participating in hot work permits, Job Safety Analyses (JSAs), and following company welding procedures and standards. * Perform terminal and pipeline asset repairs, including coating and wrapping pipe, following damage prevention procedures such as safe excavation practices. * Assist with additional tasks such as operating hand tools, line locating, pigging, line marking, light vehicle maintenance, fire watch, ditch maintenance, and housekeeping duties. * Maintain all required welding certifications and Operator Qualifications (OQ). * Comply with all company policies, OSHA, DOT, and safety regulations during all activities. Education Requirement: * High school diploma or equivalent required. * A technical degree in Welding Technology is preferred; however, relevant work experience will be accepted in lieu of a degree. * A CDL (Commercial Driver's License) is required, or the ability to obtain one within 12 months of hire. * The employee must pass and maintain all in-service and multi-qualification welding certifications per API 1104 and 1107 within 12 months of hire. Experience Requirement: * At least 1 year of direct welding experience is required. * Experience with pipeline terminal operating systems or other related industries preferred, demonstrating maturity and safe work habits in an industrial environment. * Entry-level skill in welding required. * Competence in intermediate math. * Ability to read blueprints, construction documentation, and create as-built drawings. * Knowledge of safe hot work practices, with the ability to learn and interpret confined space regulations and DOT pipeline safety regulations. * Prior terminal, pipeline, tank truck, or oilfield-related experience is helpful. * Must be available to respond to emergency after-hour calls, including weekends and holidays, and be willing to travel overnight 70-80% of the time. * Must possess a valid driver's license, maintain a clean driving record, and be able to operate company vehicles for extensive travel. * Basic office and computer skills are a plus. * Candidates with additional relevant experience may be considered for a higher-level position. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions. * Climbing ladders, scaffolding, and stairs at various heights. * Lifting and carrying objects up to 50 lbs., with the ability to lift up to 100 lbs. with assistance when needed. * Walking over various types of terrain, including inclines. * Working in crouching, bending, stooping, twisting, and kneeling positions for extended periods. * Standing for extended periods and sitting as needed. * Ability to work in awkward or restrictive positions for extended periods. * Wearing required personal protective equipment (PPE), such as safety shoes, safety glasses, hard hat, flame-resistant clothing, hearing protection, respirator, and fall protection. * Working in various environmental conditions, including exposure to all types of weather, such as extreme heat, cold, and precipitation.

Join our Team: Welder Watertown, SD Join our team at Terex Utilities and embark on an exciting opportunity as we seek a skilled and dedicated Welder to contribute to the Terex team in Watertown, SD. At Terex we believe in fostering a vibrant and inclusive work culture where every person is empowered to thrive. We're dedicated to driving quality, innovation, embracing diversity, and creating an environment where everyone feels valued and respected. We're committed to excellence in everything we do, and we're seeking talented individuals who share our passion and values to join our team. What you'll do Adhere to Terex safety policies and procedures Have ability to operate various types of welding machines on various materials: Short arc, stick, FCAW on X1050, T-1, etc Operate stationary and/or portable grinders and pneumatic chipping hammers to remove excess metal, oxidation and foreign matter from weldments and structures Operate material handling equipment to move parts and materials, as needed Read and interpret blueprints. Capable of working from drawings, sketches, templates, temporary stop gauging devices and patterns, as well as set up jigs and fixtures. Access computer terminals Comply with TEREX Utilities quality standards through error prevention and by meeting such requirements with zero defects Follow and promote The Terex Way Values Compliance with all applicable occupational health and safety required Perform other functions as needed What you'll bring High school diploma and/or equivalent experience 0-2 years of manufacturing experience Able to lift up to 40 lbs. and 40-100 lbs. with assistance of others or lifting equipment provided Possess good mechanical aptitude Capable of using most hand tools Understand and follow verbal and written instructions Recognize potential safety hazards and take appropriate actions to minimize risks Ability to read and understand blueprints, order acknowledgement, engineering drawings and written instruction Function as a team member and contribute to group goals while maintaining a positive attitude Ability to safely and efficiently operate welding equipment, forklifts and overhead cranes Atmospheric exposure to dust, and vapors Certain personal protective equipment is required Why Join Us We are a global company, and our culture is defined by our Values - Integrity, Respect, Improvement, Servant Leadership, Courage, and Citizenship. Check out this video! The Terex purpose. Safety is an absolute way of life. We expect all team members to prioritize safety and commit to Zero Harm. Our top priority is creating an inclusive environment where every team member feels safe, supported, and valued. We make a positive impact by providing innovative solutions, engaging our people, and operating in a sustainable way. We are committed to helping team members reach their full potential. Through innovation and collaboration, our vision remains forward-looking, and we aim to be a catalyst for change, inspiring others to build a better world for generations. We offer competitive salaries, health insurance (medical, dental, vision, Rx), life insurance, accidental death & dismemberment (AD&D), short-term and long-term disability, extended leave options, paid time off, company holidays, 401k matching, employee stock purchase plan, legal assistance, wellness programs, tuition reimbursement and discount programs. For more information on why Terex is a great place to work click on the link - Careers | Terex Corporate The compensation range for this position is $22.50-$25.00 per hour. Pay is based on several factors including but not limited to education, work experience, certifications, etc. This above description is non-exhaustive and there may be additional duties in accordance with the role. If you are interested in an open position but feel you may not meet all the listed qualifications, we still encourage you to apply. About Terex: Terex Corporation is a global industrial equipment manufacturer of materials processing machinery, waste and recycling solutions, mobile elevating work platforms (MEWPs), and equipment for the electric utility industry. We design, build, and support products used in maintenance, manufacturing, energy, minerals and materials management, construction, waste and recycling, and the entertainment industry. We provide best-in-class lifecycle support to our customers through our global parts and services organization, and offer complementary digital solutions, designed to help our customers maximize their return on their investment. Certain Terex products and solutions enable customers to reduce their impact on the environment including electric and hybrid offerings that deliver quiet and emission-free performance, products that support renewable energy, and products that aid in the recovery of useful materials from various types of waste. Our products are manufactured in North America, Europe, and Asia Pacific and sold worldwide. Additional Information: We are passionate about producing equipment that helps improve the lives of people around the world and providing our team members with a rewarding career and the opportunity to make an impact. We are committed to recruiting, engaging, developing, and retaining team members at all levels of our global workforce. Our culture is defined by our Terex Way Values - Integrity, Respect, Improvement, Servant Leadership, Courage, and Citizenship. Our values are the driving force behind our commitment to maintain an inclusive, supportive, non-discriminatory, and safe workplace for all team members. To that end, we are committed to actively foster a culture where every team member feels valued, listened to, and appreciated. We are committed to being fair and impartial in our decisions. As an Equal Opportunity Employer, employment decisions are made without regard to race, color, religion, national origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. If you are a qualified individual with a disability, including disabled veterans, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request reasonable accommodations by contacting the recruiting department (person or department) at ********************************** . The Company offers competitive salaries, advancement opportunities, and a full range of benefits, including paid vacation, 401(k), medical, dental, and vision.

Job Description BluArc Steel & Precast is a commercial steel and precast erection contractor located in Sioux Falls, SD. BluArc Steel & Precast has a strong family atmosphere that is looking for career minded individulas who can put their talents to good use while continuing to build a reputation for excellence and integrity in our work. Job Overview: BluArc Steel & Precast is seeking skilled Certified Stick Welders (or those interested in becoming certified stick welders) with experience in structural steel erection, to join our team. Stick Welders will be responsible for welding and assembling steel and precast components for various construction projects. This position requires a high level of precision and attention to detail.The ideal candidate must also demonstrate a strong commitment to safety by following the proper industry procedures and wearing appropriate protective equipment when necessary. Pay: Ranging from $24 - $27 per hour, based on experience. Hours: A typical work day is Monday through Friday from 7:00AM to 3:30PM, actual working hours and days may vary due to project deadlines - overtime may be required as needed. Benefits: BluArc Steel and Precast offers competitive wages and a full benefits package for all full-time employees: Health Dental Vision Life and AD&D Long-Term Disability 401(k) AFLAC Paid Holidays Vacation Requirements: Certification in stick welding is preferred, but not required - willing to train the right candidate Proficient in using hand tools and operating welding equipment Experience with crane operation is a plus Basic math skills for measurements and calculations Must be willing to work at heights Willing to work in all weather conditions Ability to work well in a team environment Must be available for some travel outside of Sioux Falls (about 20%) Physical endurance to complete the necessary tasks Ability to pass all pre-employment screenings If this interests you or you know of someone who would be perfect for this job, please contact us or email your resume to ********************* You can also apply in person at our office located at 4700 N Westport Ave, Sioux Falls, SD 57107. #hc72689

KEY RESPONSIBILITIES Reads and interprets blueprints and test sheets; gathers and organizes all parts in a logical building order. Determines appropriate work surface (table, saw horse, floor). Grinds parts as necessary in preparation for welding and finalizing. Sets welding gun to correct thickness; operates welding gun and plasma torch to weld and cut necessary holes. Produces quality welds on a variety of metals (mild steel, aluminum, stainless and galvanized steel), while operating in horizontal, vertical and overhead positions. Visually inspects work to ensure that all parts are correctly welded to TCF engineering and quality standards (no holes, splatter or incorrect measurements). Tags product; requests supervisor/team lead inspection of product. Operates forklift/bridge crane/pallet jack to deliver product to wash or blast booth. Act, Live, and Behave by TCF Core Values. Additional duties may be assigned, dependent upon location and product line. QUALIFICATIONS High school diploma or GED 12+ months' related experience and/or training (technical school) or equivalent combination of education and experience. Vocational technical school preferred. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals written in English. Basic math skills to include addition, subtraction, multiplication and division in all units of measure including whole numbers, fractions and decimals. Ability to read a tape measure. Ability to use tools in a safe and proper manner. Based on department, may be required to operate a forklift, overhead crane, and electric pallet jack. CERTIFICATIONS, LICENSES, REGISTRATIONS AND REQUIRED TRAINING The following certifications and training, if required, will be provided by the company: Forklift Certificate Bridge Crane Training Welding Certificate(s) as needed Fall Protection Training Compressed Gases Training PHYSICAL DEMANDS/WORKING CONDITIONS To successfully perform the essential function of this position, employees must have the ability to: Continuously lift/move up to 25 pounds; frequently life/move up to 50 pounds; and occasionally pull up to 100 pounds with wheels (pallet jack). Continuously stand; walk; use hands to finger, handle or feel; reach with hands and arms above shoulder height; stoop, kneel, crouch or crawl; talk; and hear. Occasionally climb, balance, stoop, kneel, reach with hands and arms at waist level and below the waist, and work in limited space. Specific vision abilities required include close vision, color vision, distance vision, peripheral vision and depth perception. WORK ENVIRONMENT While performing the duties of this position, the employee is continuously exposed to moving mechanical parts and extreme heat. The employee is occasionally exposed to high places, fumes or airborne particles, caustic chemicals and vibration. The noise level in the work environment is usually loud. SAFETY Twin City Fan is dedicated to providing a safe and healthy work environment. Each and every employee must understand and continually work within the safety and health rules and policies. The use of good judgment and common sense is critical to workplace safety, and Twin City Fan expects every employee to work in a safe and conscientious manner. This job description does not constitute a written or implied contract of employment, nor is it an all-inclusive list of responsibilities. Twin City Fan Companies, Ltd. reserves the right to revise or change job duties and responsibilities as business needs arise. Qualifications are representative of minimum levels of knowledge, skills, and experience required.

At Astec-Yankton, our mission is to design, build, and capitalize on the most innovative solutions and products for the industries and customers we serve globally. Our employees thrive in a safe and team-oriented work environment where they are empowered to make suggestions for operational and sustainability enhancements. With safety as our first core value, we take pride in developing talent and invest in training, protective equipment, and technology for continuous improvement. If you share our dedication to advancement and quality services, we'd love to have you join us! If you're looking to expand your skills in welding/fabrication, or you're an experienced welder tired of seeing the same plans, we provide variety and opportunities! What You'll Do: * Read and understand assigned blueprints prior to starting a project. * Participate in process and product development and improvement programs. * Accurately inspect metal prior to welding to ensure clean welds. * Perform grinding operations that comply with Astec's standards. * Ability to perform grinding and be able to pass a required welding skills test. * Necessary to be able to do all grinding tasks. * Must be able to safely weld vertical, flat, and overhead with both MIG and arc techniques. * Must inspect metal prior to welding for smoothness and acceptability and clean welds to presentable state. * Keep work area clean and neat. * Clock in on assigned jobs as appropriate. * Ensure welding machine settings are appropriate for work to be performed. * Must be able to safely use cranes and forklifts. * Must be trained in and know PPE requirements for welding including hood and filter shades and arm/body protection. * Must be able to read and understand weld symbols. * Must maintain welding machines by keeping them clean. * Follow company policies and procedures at all times. * Follow proper safety rules and procedures at all times. * Performs other duties as assigned. Why You'll Love Working for Us: * Health, Dental, Vision- 1 Day Eligibility * Life, and Spousal Insurance * Health Savings and Flexible Spending Accounts * Short-Term and Long-Term Disability * 401(k) with Company Match * We offer to pay for AWS certification fees * PTO * Employee Wellness Programs, Tuition Aid, and Employee Assistance What We Need from You: * High School Diploma or GED preferred. * 1 Year of Welding experience required. * Must have successful weld and bend test. * Heavy equipment manufacturing experience desired. * Ability to properly and safely MIG weld and arc gouging required. * Understanding and ability to read weld symbols, blueprints, and company drawings required. * Ability to understand and read a tape measure required. * Experience operating various hand, power, and hydraulic tools desired. * Experience operating forklifts, overhead hoists, and cranes desired. * Computer experience desired, particularly the ability to use a mouse and locate and open/close programs/files. ASTEC is a Drug Free Workplace, Affirmative Action, and Equal Opportunity Employer. We do not discriminate based on race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. At ASTEC, we value diversity and strive to create a welcoming and inclusive workplace. We recognize that some highly qualified women may not apply for roles due to systemic barriers. We encourage all qualified applicants to apply, and are committed to providing a fair and equitable hiring process for all candidates.

Set Up Welder Advance your career as a Welder for a well-established company in Yankton, SD! This position comes with a steady work schedule, overtime opportunities and weekly pay! Set up equipment and weld parts using arc, gas shielded arc, or gas welding equipment. Use hand tools, clamps, jigs, and fixtures. Work from specifications, drawings, and weld symbols. Prepare and complete work on materials by welding, cutting, grinding, and cleaning metal. Pay: $18/HR or more depending on experience Shift: 1st; Monday Thursday (Friday OT as Needed) Hours: 6am - 4:30pm Don't Wait; Apply Today! Why work for Advance Services, Inc. Advance Services is for and about people; we are your employment specialists. Enjoy our easy application process. You NEVER pay a fee! Weekly pay. Fun Safety and attendance incentives. Health Benefits to keep you and your family healthy. Great Referral Incentives. Advance Services partners with the top companies in the area! Apply for this job by clicking the apply button. You will be directed to our website, *********************** Please select a branch near you or call our office at ************. Stop in and see our experienced, bilingual, and friendly staff today at 1800 Broadway, Suite 2, Yankton, SD 57078. Advance Services is an equal opportunity employer

Job Description Custom Truck Equipment is looking to hire an Exhaust Technician. At North American Truck & Trailer, we pride ourselves on our energetic atmosphere. By joining our team, you can experience a rewarding career with a leader in the truck industry. We are always looking for great candidates to join our team. Job Summary: An Exhaust Technician, also known as an Exhaust System Specialist, is responsible for diagnosing, repairing, and maintaining exhaust systems in vehicles. This role plays a vital part in ensuring vehicles are operating safely, efficiently, and within environmental regulations by inspecting, repairing, and replacing exhaust components as needed. Key Responsibilities: Inspection and Diagnosis: Conduct thorough inspections of vehicle exhaust systems to identify issues, including leaks, corrosion, damage, and exhaust emissions problems. Use diagnostic tools and equipment to pinpoint exhaust system malfunctions. Interpret diagnostic results and discuss findings with customers. Repairs and Maintenance: Perform repairs on exhaust systems, including welding, patching, or replacing damaged components such as mufflers, catalytic converters, pipes, and hangers. Conduct exhaust system modifications or upgrades as per customer requests. Perform routine maintenance tasks, such as tightening clamps and securing loose components. Emissions Testing: Conduct emissions testing to ensure vehicles meet environmental standards and regulations. Make necessary adjustments or repairs to reduce emissions to acceptable levels. Keep abreast of changing emission regulations and technology. Customer Interaction: Provide clear explanations of necessary repairs or replacements to customers. Offer accurate estimates for repair costs and timelines. Address customer concerns and answer questions regarding exhaust system issues. Documentation and Record-Keeping: Maintain accurate records of all work performed, including parts used, labor hours, and customer information. Complete service reports and invoices for customers. Safety and Compliance: Follow safety protocols and guidelines when working with exhaust systems and related equipment. Comply with environmental regulations regarding emissions control and disposal of hazardous materials. Ensure that the workplace is clean, organized, and safe. Equipment and Tool Maintenance: Maintain and calibrate tools and equipment used for exhaust system repairs. Report any equipment issues or needs for replacement. Qualifications: High school diploma or equivalent; vocational or technical training in automotive repair is preferred. Proven experience as an Exhaust Technician or Automotive Technician with expertise in exhaust system repair. Proficiency in using diagnostic tools and equipment for exhaust system diagnostics. Strong welding skills and experience in metal fabrication. Knowledge of emission control systems and regulations. Excellent problem-solving skills and attention to detail. Effective communication skills and customer service orientation. Ability to work independently and as part of a team. Physical ability to lift and maneuver heavy exhaust system components. Valid driver's license and a clean driving record (if required). Exhaust Technicians play a critical role in ensuring that vehicles are safe, environmentally compliant, and perform optimally. They must possess a strong understanding of exhaust systems, emissions regulations, and the ability to diagnose and repair issues efficiently while maintaining a focus on customer satisfaction and safety. Specific responsibilities may vary depending on the employer and the types of vehicles serviced. #hc215220

Job DescriptionJob Summary:Perform welding operations to produce world class components for cooling systems as part of either a team led production line or individual paced work center. Both steel and aluminum welders needed.Responsibilities: Operate production line welding stations and perform product assembly. Troubleshoot and maintain production line welding stations. Perform equipment and set-up change-overs as needed. Responsible for quality control. Make adjustments as necessary to produce product within specifications. Reject product outside of specifications. Operate within standard operating procedures and Job Safety Analysis. Complete daily production logs. Perform preventive maintenance (PMs) on production line machinery. Communicate with operators from other shifts. Clean and maintain work area. Turn off and lock out equipment when not in use. Other duties as assigned. Additional Responsibilities: Assist maintenance and manufacturing engineers. Provide on-the-job training to new employees. Requirements: High School diploma or GED. A minimum of 2 years of production welding experience Demonstrated Tig and / or Mig welding skills Basic reading, writing, and arithmetic skills required. This is normally acquired through a high school diploma or equivalent. Manual dexterity required for operating machinery. Ability to lift up to 40 pounds required. Working Conditions: Working conditions are normal for a manufacturing environment. Temperature periodically exceeds 90 degrees. Work involves frequent lifting of materials and product up to 50 pounds. Machinery operation requires the use of safety equipment to include but not limited to; eye safety glasses, hearing protection and steel toe shoes. Adams Thermal Systems offers a comprehensive employee benefit package including: Paid Time Off (PTO) 10 Paid Holidays Per Year Group Medical Insurance Dental Insurance Vision Insurance 401(K) Retirement Savings Plan with Employer Match Life Insurance at 1x Annual Salary Long Term Disability Also Available Short Term Disability Hospital Indemnity Critical Illness Coverage Term Life Insurance Identity Protection First Shift is: Monday through Thursday 5AM - 3PM. OT will be Fridays 5PM - 1PM. Second Shift is: Monday through Thursday 3PM - 1AM. OT will be Fridays 1PM - 9PM

About The Role Assist in assembling and welding of trailers as directed. Responsibilities Perform flat and horizontal welds within acceptable limits set by TK standard. Read and understand blueprints for specified trailer. Assist Lead Welder in assigned stall to effectively and efficiently produce trailers. Perform minimal assembly procedures successfully. Operates over-head and jib cranes safely and efficiently. Maintain acceptable attendance per Company guidelines. Follows all safety procedures and regulations. Perform other duties as assigned. Candidate Requirements Must successfully complete internal weld training program and possess the ability to use measuring tools and devices accurately. Ability to apply basic math skills with addition, subtraction, multiplication and division. Have a positive attitude, good work ethic and ability to work with others. Physical Demands & Work Environment The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, employee is required to stand; walk; sit; climb; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. At times, must use ladders to work at heights of up to 12 feet. Work Environment: While performing the duties of this job, the employee is exposed to changes in temperature and humidity, exposure to dust, fumes and is near moving machinery.

At Total Fire Protection we are passionate about our customers, our employees, and the work we perform. We maintain a workplace that individuals can be proud of, where talents are embraced, and results are encouraged and supported. Our Company is currently looking for a Fire Sprinkler Welder and Fabricator. As a Welder and Fabricator, you will be handling, measuring, laying out, and cutting various sizes of Sprinkler Pipe. You also will be responsible for welding several different types of pipe fittings to pipe and testing to ensure welds meet specifications. Job Requirements: 18 years of age or older. Must provide proof of U.S. Citizenship, or must be legally allowed to work in the United States. High School diploma or GED. Previous welding experience is preferred, but will to train the right candidate. Ability to understand blueprints, shop cut sheets, and weld symbols. Experience with manual and power tools. Strong attention to detail. Ability to perform duties safely and effectively. Essential Job Functions: Select and set up appropriate welding equipment and welding method based on project requirements. Read cut sheets to determine what length of pipe is needed, the location, and the orientation of outlets. Operate angle grinder to prepare metal for welding. Test and inspect welded surfaces for flaws. Maintain equipment. Follow all safety and PPE requirements. Other duties as assigned.

For over 100 years, Maguire has been an industry leader in the fabrication, construction, and maintenance of water storage tanks and elevated water towers. The Shop Flux Core/Stick Welder will weld, cut, and braze metal pieces and products by using Flux Core & Stick welding equipment and techniques for the new tank division. The position will require good knowledge of welding techniques and have the ability to produce quality work. Essential Functions: * Plans details of work order procedures; gathers required tools and materials based on instructions and specifications provided for the job. * Repairs and fabricates various items and equipment using cutting, burning, and welding techniques and equipment. * Monitors the welding, burning, and fitting process to ensure parts are not overheated or damaged by warping, distortion, expansion, or shrinkage. * Prepares, assembles, and tacks weld parts and surfaces to be welded. * Maintains, organizes, and cleans equipment and the work area. * Notifies supervisor when faulty equipment or defective materials are discovered. The above statements are intended to describe the general nature and level of work being performed and not an exhaustive list of all responsibilities, duties, and skills required of team members. May perform other duties as assigned. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals to perform the essential functions. * 3+ years of stick or Flux Core welding * Must be able to pass a company weld test * Thorough understanding of machines and tools used in welding, including designs, uses, maintenance, and repair. * Basic understanding of design techniques, principles, and tools necessary for the precise production of technical plans, drawings, models, and blueprints. * Excellent ability to read and listen to assignments given in a variety of forms. * Basic understanding of mathematics as related to welding assignments. Work Environment: * Must be able to weld components that are vertical, flat, or overhead. * Must have enough manual dexterity and stability as required for precision work. * Must be able to see details at close range. * Must be able to lift up to 50 pounds at times. * Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials. At Maguire, we believe in protecting and storing quality water. We do this by being the best water tank company for our customers and employees. Maguire is an Equal Opportunity Employer (EOE). Maguire complies with all applicable federal, state and local laws regarding hiring and employment. Qualified applicants are considered for employment without regard to age, race, color, religion, sex, national origin, sexual orientation, gender identity, disability or veteran status.

The Welder is responsible for set-up and operation of advanced welding equipment. This position uses expertise to solve problems and eliminate scrap, rework and downtime while effectively repairing defective products. The appearance of the repair work must be at an acceptable level and meet high quality standards. The Welder is also responsible for operating robotic welding machines as needed and for making sure all work is done to specification. A successful candidate is a self-motivated multitasker that utilizes a strong work ethic to ensure all quality levels are met. KEY RESPONSIBILITIES: Plans details of working procedure. Inspects finished product for completeness and conformance to all quality assurance procedures. Safely operates all advanced level welding equipment including robotic welding. Sets up, troubleshoots and makes advanced adjustments welding machines as needed to maintain good production and quality. Utilizes as weld training contact for weld lines and provides mentoring to new welders. Participates in improvement planning - modification of weld procedures to increase safety, efficiency, and quality. Other duties as assigned. KEY SKILLS AND COMPETENCIES: Ability to understand and follow verbal and written instructions. Ability to read and understand blueprints, work order instructions, weld symbols and operate required tools involved in position. Basic data entry skills for maintenance breakdown calls. Good problem solving skills, safety practices and attention to quality. Must be able to handle physical, repetitive work and be able to stand on your feet for 8 hours a day. 1 year weld experience preferred but not required. EDUCATION AND EXPERIENCE REQUIREMENTS: High School Diploma or equivalent. WORKING CONDITIONS/OTHER: Work Hours/Status: The 1st shift includes Monday - Thursday 5am - 3pm. The 2nd shift includes Monday - Thursday 3pm - 1am with a shift differential of $3.00/hr. The weekend shift includes Friday - Sunday 6am-6pm for a total of 36 hours and added weekend shift differential of $4.50/hr. This position description is not intended to be an exhaustive list of all duties, responsibilities and competencies required of this position. Employees are held accountable for all aspects for the job, which are subject to change at any time. An individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Company Information We are dedicated to the belief that people are our most important asset. In filling job openings every effort is expended to find candidates within Crenlo, its divisions or subsidiaries. Employee development, opportunity to grow and continuing to evolve both as an employee and as a company are instrumental to our success. We encourage employees to inquire about open positions and apply to those that help further their career goals. Crenlo Engineered Cabs is an equal employment opportunity employer. Qualified applicants are considered regardless of race, color, religion, age, national origin, sex, disability or veteran's status.

Larson Trailers/ Drive Trailers. is a manufacturing company of Fiber Blowing Trailers and Custom Trailers, is seeking Welders to cut and join metals and other materials at our facility. You will operate appropriate equipment to put together mechanical structures or parts. Your job is important as it provides the foundation for strong infrastructure. A welder must be competent in using potentially dangerous equipment following all safety precautions. The ideal candidate will have a steady hand and great attention to detail. Knowledge of different kinds of metal thicknesses and welding procedures. Responsibilities: Read blueprints and drawings and take or read measurements to plan layout and procedures Determine the appropriate welding equipment or method based on requirements Set up components for welding according to specifications Operate angle grinders to prepare the parts that must be welded Align components using tape measure and clamp pieces Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead) Repair or manufacture components by welding pieces and filling gaps Test and inspect welded surfaces and structure to discover flaws Maintain equipment in a condition that does not compromise safety Skills: Proven experience as welder Experience using a variety of welding equipment and procedures Experience in using electrical or manual tools (saws, squares, clamps, tape measures, and etc.) Ability to read and interpret drawings Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.) Attention to detail Proficient in English Successful completion of a relevant apprenticeship program, will be a plus but not required Professional Certification (e.g. an AWS welding certificate) will be a plus but not required Job Type: Full-time $18.00 - $29.00 per hour (To be based on Experience) Huron, SD: Reliably commute or planning to relocate before starting work (Preferred) Experience: Welding: 2 years Work Location: One location

Job Description: HVAC Sheet Metal Fabricator/Installer Join Our Team as an HVAC Sheet Metal Fabricator/Installer! Are you a skilled HVAC Sheet Metal Fabricator/Installer looking for a new opportunity in Sioux Falls, SD? Look no further! Hander Plumbing & Heating is seeking a motivated and experienced individual to join our team. As a member of our team, you will have the opportunity to work on a variety of projects and contribute to the growth and success of our company. Key Responsibilities: Fabricate and install sheet metal components for HVAC systems Read and interpret blueprints and technical drawings Measure, cut, and shape sheet metal using specialized tools and equipment Install ductwork, fittings, and fixtures according to specifications Ensure all work is completed accurately and in a timely manner Collaborate with team members and other trades to ensure project success Maintain a clean and safe work environment Qualifications: 3+ years of experience as an HVAC Sheet Metal Fabricator/Installer Proficiency in reading blueprints and technical drawings Strong attention to detail and precision Ability to work independently and as part of a team Excellent communication and problem-solving skills Valid driver's license and reliable transportation About Us Hander Plumbing & Heating has been serving the Sioux Falls community for over 30 years. We are a family-owned and operated business that is committed to providing the highest quality plumbing, heating, and air conditioning services to our customers. Our team of skilled professionals takes pride in delivering exceptional workmanship and customer service on every project. At Hander Plumbing & Heating, we believe in investing in our employees and providing them with the tools and training they need to succeed. Join us in our mission to exceed customer expectations and build lasting relationships with our community.

Job Description At Astec-Yankton, our mission is to design, build, and capitalize on the most innovative solutions and products for the industries and customers we serve globally. Our employees thrive in a safe and team-oriented work environment where they are empowered to make suggestions for operational and sustainability enhancements. With safety as our first core value, we take pride in developing talent and invest in training, protective equipment, and technology for continuous improvement. If you share our dedication to advancement and quality services, we'd love to have you join us! If you're looking to expand your skills in welding/fabrication, or you're an experienced welder tired of seeing the same plans, we provide variety and opportunities! What You'll Do: • Read and understand assigned blueprints prior to starting a project. • Participate in process and product development and improvement programs. • Accurately inspect metal prior to welding to ensure clean welds. • Perform grinding operations that comply with Astec's standards. • Ability to perform grinding and be able to pass a required welding skills test. • Necessary to be able to do all grinding tasks. • Must be able to safely weld vertical, flat, and overhead with both MIG and arc techniques. • Must inspect metal prior to welding for smoothness and acceptability and clean welds to presentable state. • Keep work area clean and neat. • Clock in on assigned jobs as appropriate. • Ensure welding machine settings are appropriate for work to be performed. • Must be able to safely use cranes and forklifts. • Must be trained in and know PPE requirements for welding including hood and filter shades and arm/body protection. • Must be able to read and understand weld symbols. • Must maintain welding machines by keeping them clean. • Follow company policies and procedures at all times. • Follow proper safety rules and procedures at all times. • Performs other duties as assigned. Why You'll Love Working for Us: • Health, Dental, Vision- 1 Day Eligibility • Life, and Spousal Insurance • Health Savings and Flexible Spending Accounts • Short-Term and Long-Term Disability • 401(k) with Company Match • We offer to pay for AWS certification fees • PTO • Employee Wellness Programs, Tuition Aid, and Employee Assistance What We Need from You: • High School Diploma or GED preferred. • 1 Year of Welding experience required. • Must have successful weld and bend test. • Heavy equipment manufacturing experience desired. • Ability to properly and safely MIG weld and arc gouging required. • Understanding and ability to read weld symbols, blueprints, and company drawings required. • Ability to understand and read a tape measure required. • Experience operating various hand, power, and hydraulic tools desired. • Experience operating forklifts, overhead hoists, and cranes desired. • Computer experience desired, particularly the ability to use a mouse and locate and open/close programs/files. ASTEC is a Drug Free Workplace, Affirmative Action, and Equal Opportunity Employer. We do not discriminate based on race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. At ASTEC, we value diversity and strive to create a welcoming and inclusive workplace. We recognize that some highly qualified women may not apply for roles due to systemic barriers. We encourage all qualified applicants to apply, and are committed to providing a fair and equitable hiring process for all candidates.

KEY RESPONSIBILITIES: Use standard work instructions and blueprints when available Visually inspect weld quality Fabricates and assembles metal structures Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal, or overhead) Fabricates and assembles metal structures Perform efficient welding of various metal objects with help of gas torch and welder Rework and/or repair welded parts and products according to engineering specification changes Complete run out checks Fit Wheels and Fans with limited supervision Maintain weld machines using preventative maintenance methods Maintains good housekeeping and clean work areas in assigned space Act, Live, and Behave by TCF Core Values. Additional duties may be assigned, dependent upon location and product line Qualifications Typically requires a high school diploma and up to 2 years of experience Read and understand shop orders and blueprints, safety rules, standard work instructions. Ability to read and comprehend all weld symbols Complete documentation and work in a timely manner Ability to use hand tools in a safe and proper manner as well as read a tape measure. Based on department, may be required to operate a forklift, overhead crane, and electric pallet jack. CERTIFICATIONS, LICENSES, REGISTRATIONS AND REQUIRED TRAINING The following certifications and training, if required, will be provided by the company: JSA completion, Forklift Operations, PPE identification and usage, Crane Training, hazard awareness/identification, Lift table operations, Rigging safety Understands SQDE Metrics, LDMS, Issue boards, 5S PHYSICAL DEMANDS/WORKING CONDITIONS: To successfully perform the essential function of this position, employees must have the ability to: Continuously lift/move 10 pounds; frequently lift/move up to 25 pounds and occasionally lift/move up to 50 pounds. Continuously stand; walk; bend/stoop, use hands to finger, handle or feel; reach with hands and arms above shoulder height; stoop, kneel, crouch or crawl; talk; and hear. Occasionally climb, balance, kneel, reach with hands and arms at waist level and below the waist, and work in limited space. Specific vision abilities required include close vision, color vision, distance vision, peripheral vision, and depth perception. WORK ENVIRONMENT: While performing the duties of this position, the employee is continuously exposed to moving mechanical parts and extreme heat. The employee is occasionally exposed to high places, fumes, or airborne particles and/or caustic chemicals. The noise level in the work environment is usually loud. SAFETY Twin City Fan is dedicated to providing a safe and healthy work environment. Every employee must understand and continually work within the safety and health rules and policies. The use of good judgment and common sense is critical to workplace safety and Twin City Fan expects every employee to work in a safe and conscientious manner. This job description does not constitute a written or implied contract of employment, nor is it an all-inclusive list of responsibilities. Twin City Fan Companies, Ltd. reserves the right to revise or change job duties and responsibilities as business needs arise. Qualifications are representative of minimum levels of knowledge, skills, and experience required .

Join our Team: Weekend Welder Huron, SD Fri-Sun 6am-6:30pm At Terex Utilities we believe in fostering a vibrant and inclusive work culture where every person is empowered to thrive. We're dedicated to driving quality, innovation, embracing diversity, and creating an environment where everyone feels valued and respected. We're committed to excellence in everything we do, and we're seeking talented individuals who share our passion and values to join our team. What you'll do: Adhere to Terex safety policies and procedures Have ability to operate various types of welding machines on various materials: Short arc, stick, FCAW on X1050, T-1, etc Operate stationary and/or portable grinders and pneumatic chipping hammers to remove excess metal, oxidation and foreign matter from weldments and structures Operate material handling equipment to move parts and materials, as needed Read and interpret blueprints. Capable of working from drawings, sketches, templates, temporary stop gauging devices and patterns, as well as set up jigs and fixtures. Access computer terminals Comply with TEREX Utilities quality standards through error prevention and by meeting such requirements with zero defects Follow and promote The Terex Way Values Compliance with all applicable occupational health and safety required Perform other functions as needed What you'll bring: Basic Qualifications: High school diploma and/or equivalent experience 0-2 years of manufacturing experience Able to lift up to 40 lbs. and 40-100 lbs. with assistance of others or lifting equipment provided Preferred Qualifications: Possess good mechanical aptitude Capable of using most hand tools Understand and follow verbal and written instructions Recognize potential safety hazards and take appropriate actions to minimize risks Ability to read and understand blueprints, order acknowledgement, engineering drawings and written instruction Function as a team member and contribute to group goals while maintaining a positive attitude Ability to safely and efficiently operate welding equipment, forklifts and overhead cranes Atmospheric exposure to dust, and vapors Certain personal protective equipment is required The compensation range for this position is $22.84-$27.94 hourly. Pay is based on several factors including but not limited to education, work experience, certifications, etc. Why Join Us We are a global company, and our culture is defined by our Values - Integrity, Respect, Improvement, Servant Leadership, Courage, and Citizenship. Check out this video! The Terex purpose Safety is an absolute way of life. We expect all team members to prioritize safety and commit to Zero Harm. Our top priority is creating an inclusive environment where every team member feels safe, supported, and valued. We make a positive impact by providing innovative solutions, engaging our people, and operating in a sustainable way. We are committed to helping team members reach their full potential. Through innovation and collaboration, our vision remains forward-looking, and we aim to be a catalyst for change, inspiring others to build a better world for generations. For more information on why Terex is a great place to work click on the link! Careers | Terex Corporate This above description is non-exhaustive and there may be additional duties in accordance with the role. If you are interested in an open position but feel you may not meet all the listed qualifications, we still encourage you to apply. How to Apply To apply for this role and view all available positions within Terex, please visit our careers page: ********************* Terex is an equal opportunity employer and appointments are based on merit. We value diversity and welcome applications from all sections of our community. If you are interested in an open position but feel you may not meet all the listed qualifications, we still encourage you to apply. About Terex: Terex Corporation is a global industrial equipment manufacturer of materials processing machinery, waste and recycling solutions, mobile elevating work platforms (MEWPs), and equipment for the electric utility industry. We design, build, and support products used in maintenance, manufacturing, energy, minerals and materials management, construction, waste and recycling, and the entertainment industry. We provide best-in-class lifecycle support to our customers through our global parts and services organization, and offer complementary digital solutions, designed to help our customers maximize their return on their investment. Certain Terex products and solutions enable customers to reduce their impact on the environment including electric and hybrid offerings that deliver quiet and emission-free performance, products that support renewable energy, and products that aid in the recovery of useful materials from various types of waste. Our products are manufactured in North America, Europe, and Asia Pacific and sold worldwide. Additional Information: We are passionate about producing equipment that helps improve the lives of people around the world and providing our team members with a rewarding career and the opportunity to make an impact. We are committed to recruiting, engaging, developing, and retaining team members at all levels of our global workforce. Our culture is defined by our Terex Way Values - Integrity, Respect, Improvement, Servant Leadership, Courage, and Citizenship. Our values are the driving force behind our commitment to maintain an inclusive, supportive, non-discriminatory, and safe workplace for all team members. To that end, we are committed to actively foster a culture where every team member feels valued, listened to, and appreciated. We are committed to being fair and impartial in our decisions. As an Equal Opportunity Employer, employment decisions are made without regard to race, color, religion, national origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. If you are a qualified individual with a disability, including disabled veterans, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request reasonable accommodations by contacting the recruiting department (person or department) at ********************************** . The Company offers competitive salaries, advancement opportunities, and a full range of benefits, including paid vacation, 401(k), medical, dental, and vision. If you are interested in an open position but feel you may not meet all the listed qualifications, we still encourage you to apply. About Terex: Terex Corporation is a global industrial equipment manufacturer of materials processing machinery, waste and recycling solutions, mobile elevating work platforms (MEWPs), and equipment for the electric utility industry. We design, build, and support products used in maintenance, manufacturing, energy, minerals and materials management, construction, waste and recycling, and the entertainment industry. We provide best-in-class lifecycle support to our customers through our global parts and services organization, and offer complementary digital solutions, designed to help our customers maximize their return on their investment. Certain Terex products and solutions enable customers to reduce their impact on the environment including electric and hybrid offerings that deliver quiet and emission-free performance, products that support renewable energy, and products that aid in the recovery of useful materials from various types of waste. Our products are manufactured in North America, Europe, and Asia Pacific and sold worldwide. Additional Information: We are passionate about producing equipment that helps improve the lives of people around the world and providing our team members with a rewarding career and the opportunity to make an impact. We are committed to recruiting, engaging, developing, and retaining team members at all levels of our global workforce. Our culture is defined by our Terex Way Values - Integrity, Respect, Improvement, Servant Leadership, Courage, and Citizenship. Our values are the driving force behind our commitment to maintain an inclusive, supportive, non-discriminatory, and safe workplace for all team members. To that end, we are committed to actively foster a culture where every team member feels valued, listened to, and appreciated. We are committed to being fair and impartial in our decisions. As an Equal Opportunity Employer, employment decisions are made without regard to race, color, religion, national origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. If you are a qualified individual with a disability, including disabled veterans, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request reasonable accommodations by contacting the recruiting department (person or department) at ********************************** . The Company offers competitive salaries, advancement opportunities, and a full range of benefits, including paid vacation, 401(k), medical, dental, and vision.

For over 100 years, Maguire has been an industry leader in the fabrication, construction, and maintenance of water storage tanks and elevated water towers. The Shop Welder will weld, cut, and braze metal pieces and products by using flame-cutting and hand welding equipment for the new tank division. The position will require good knowledge of welding techniques and have the ability to produce quality work. This shift will run Friday, Saturday, and Sunday; 12-hour days (6:00am-6:30pm). Work 36 hours and get paid for 40 as long as specific conditions are met! Essential Functions: * Plans details of work order procedures; gathers required tools and materials based on instructions and specifications provided for the job. * Repairs and fabricates various items and equipment using cutting, burning, and welding techniques and equipment. * Monitors the welding, burning, and fitting process to ensure parts are not overheated or damaged by warping, distortion, expansion, or shrinkage. * Prepares, assembles, and tacks weld parts and surfaces to be welded. * Maintains, organizes, and cleans equipment and the work area. * Notifies supervisor when faulty equipment or defective materials are discovered. * Performs other related duties as assigned. The above statements are intended to describe the general nature and level of work being performed and not an exhaustive list of all responsibilities, duties, and skills required of team members. May perform other duties as assigned. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals to perform the essential functions. * 3+ years of SMAW (stick) or FCAW (flux-core) welding experience * Must be able to pass a company weld test * Thorough understanding of machines and tools used in welding including designs, uses, maintenance and repair. * Basic understanding of design techniques, principles, and tools necessary for the precise production of technical plans, drawings, models and blueprints. * Excellent ability to read and listen to assignments given in a variety of forms. * Basic understanding of mathematics as related to welding assignments. Work Environment: * Must be able to weld components that are vertical, flat, or overhead. * Must have enough manual dexterity and stability as required for precision work. * Must be able to see details at close range. * Must be able to lift up to 50 pounds at times. * Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials. At Maguire, we believe in protecting and storing quality water. We do this by being the best water tank company for our customers and employees. Maguire is an Equal Opportunity Employer (EOE). Maguire complies with all applicable federal, state and local laws regarding hiring and employment. Qualified applicants are considered for employment without regard to age, race, color, religion, sex, national origin, sexual orientation, gender identity, disability or veteran status.