Who we are:
The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced plastics including interior sandwich panels for creating structures such as aircraft galleys and bulkheads, honeycomb core and related products.
The Gill Corporation is seeking a Fabrication Assembler with experience in production assembly, high attention to detail, accuracy, and efficiency. Key qualities to be successful in this role are to be a team player, willingness for hands-on learning. This position assists the department supervisor in various day-to-day work activities within the fabrication department and will complete rework activities per the direction of the Operations Engineering.
Reporting to the Production Supervisor they will perform but not be limited to the following responsibilities.
Responsibilities:
Primary duties include finishing detailed panel assembly and liners.
Uses specifications, blueprints, mylar and work orders.
Deburrs and cleans insert drill holes prior to insert installation.
Applies adhesive to plugs/ sleeves and panel prior to plug/ sleeve installation.
Prepares panel assemblies for edge fill operation.
Mixes and applies adhesive to the undercut/edge of panels.
Hand routes with pneumatic hand router all detailed liners using the specified tool required.
Records all material and logs information on work orders and in SAP software.
Other essential duties may be assigned.
Shift Requirement and Compensation for this role:
1st Shift 5:30am - 2:00pm
Compensation: Base Rate starting at $22.15/hr
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Required Qualifications:
1 - 3 years of assembly or manufacturing experience
Must be able to read and know how to use blueprints and work orders.
Must have basic computer skills and knowledge.
Experience in Aircraft manufacturing a plus.
Construction, carpentry and forklift experience a plus.
Must have a high school diploma, GED or equivalency
Must have English reading and verbal communication skills sufficient to read, understand and communicate the company operating procedures and policies.
Must be able to lift, push and pull a minimum of 50 lbs.
Must be able to demonstrate math proficiency equal to or greater than required for the position applied.
Must be available to work the shift specified by the position and be flexible to potential overtime on weekends/ holidays.
ITAR Requirement:
This position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A “U.S. person” according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee.
The Gill Corporation is an Equal Opportunity Employer
. Applicants for all job openings are welcome and will be considered without regard to race, religious creed, color, age, sex, gender identity, gender expression, genetic information, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, veteran status, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances.
The Gill Corporation provides reasonable accommodations
to qualified individuals with disabilities in accordance with the Americans with Disability Act and applicable state and local law. If you require an accommodation in the application process, please notify the Human Resources Department
.
$22.2 hourly 17d ago
Looking for a job?
Let Zippia find it for you.
Metal Fabricator
Aerotek 4.4
Fabricator job in Santa Clarita, CA
If you have **Grinding or OD & ID or Manual Grinding or Metal Fabrication** experience and you're looking for a new position **ASAP** , then this is the position for you! A popular aerospace company in **Valencia** who manufactures various **Aerospace** parts is looking for **Grinders** to join their team!
Aerotek offers you a **rapid interview process** with the company so you can start ASAP.
**Skills** **:**
Grinder / ID - OD / Manual Grinding / Metal Fabrication - Deburring / Aerospace or Aviation experience is a plus
**Experience Level:**
Entry - Expert Level
**Location** **:**
**Valencia**
**Pay:**
$20 - 35hr
**Shift** :
Mon - Fri
1st shift
**6am - 3:30pm**
2nd shift
**3pm - 11:30pm**
**Apply right now and expect a** **call/text** **from** **Ryan with Aerotek** ** Positions** **with this company are limited and will be filled quickly!**
**Job Type & Location**
This is a Permanent position based out of Valencia, CA 91355.
**Pay and Benefits**
The pay range for this position is $18.00 - $35.00/hr.
- Medical, dental & vision
- Critical Illness, Accident, and Hospital
- 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available
- Life Insurance (Voluntary Life & AD&D for the employee and dependents)
- Short and long-term disability
- Health Spending Account (HSA)
- Transportation benefits
- Employee Assistance Program
- Time Off/Leave (PTO, Vacation or Sick Leave)
**Workplace Type**
This is a fully onsite position in Valencia,CA 91355.
**Application Deadline**
This position is anticipated to close on Feb 6, 2026.
**About Aerotek:**
We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
$20-35 hourly 2d ago
Fabrication Assembler
Insight Global
Fabricator job in El Monte, CA
- 1 - 3 years of assembly or manufacturing experience - Must be able to read and know how to use blueprints and work orders. - Must have basic computer skills and knowledge. - Experience in Aircraft manufacturing a plus. - Construction, carpentry and forklift experience a plus.
- Must have a high school diploma, GED or equivalency
- Must have English reading and verbal communication skills sufficient to read, understand and communicate the company operating procedures and policies.
- Must be able to lift, push and pull a minimum of 50 lbs.
- Must be able to demonstrate math proficiency equal to or greater than required for the position applied.
- Must be available to work the shift specified by the position and be flexible to potential overtime on weekends/ holidays.
We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: ****************************************************
Skills and Requirements
- 1 - 3 years of assembly or manufacturing experience
- Must be able to read and know how to use blueprints and work orders.
- Must have basic computer skills and knowledge.
- Experience in Aircraft manufacturing a plus.
- Construction, carpentry and forklift experience a plus.
- Must have a high school diploma, GED or equivalency
- Must have English reading and verbal communication skills sufficient to read, understand and communicate the company operating procedures and policies.
- Must be able to lift, push and pull a minimum of 50 lbs.
- Must be able to demonstrate math proficiency equal to or greater than required for the position applied.
- Must be available to work the shift specified by the position and be flexible to potential overtime on weekends/ holidays.
$34k-43k yearly est. 11d ago
Lead Foam Fabricator - 1st Shift
KSR Foam and Technical Products LLC 4.3
Fabricator job in Garden Grove, CA
We are a small safety foam manufacturing company that is looking to add a Lead Foam Fabricator to our team. We take pieces of foam and use specialized tooling and equipment to form the parts to our customers' specifications. Production Employees use hot wires plus basic cutting tools to manufacture parts. We will teach and train!
This is a hands-on job! If you like to work with your hands, then this is the job for you.
We are looking for someone who is
willing to learn, can
be trained, and
works well
as part of a team. Must be reliable, able to follow step-by-step instructions, work well with others, and take
initiative
. This is a fast-paced Warehouse environment.
Qualifications:
Construction or any Manufacturing Assembly Experience is a plus
Able to follow step-by-step instructions
Basic math skills
Should know basic measurements and how to read a tape measure and blueprint or be willing to learn
Experience with manufacturing/production methods and procedures a plus
Must be able to work in a team environment
Must be able to understand/read/write English
Physical Demands
Moving parts, machine noise
Able to walk/stand for hours at a time
Lift/Move/Position: 25 pounds occasionally; 10 pounds routinely
Ability to lift/push/pull/carry up to 50 pounds on own and up to 100 pounds with assistance.
Use of hands and fingers
Frequent exposure to dust and debris from the production process.
Regular Hours: Monday through Friday, 7am-3:30pm. Saturdays and Overtime as needed. There is the possibility of adding a 2nd shift.
Starting rate depends on experience.
Full-time employees are eligible for the shipping bonus plan based on performance and attendance.
Company Description
KSR Foam and Technical Products is the leading fabricator of finished reticulated polyurethane/anti slosh foam kits and technical products for a wide range of military, commercial and high-performance applications. We are a small and growing company located in Garden Grove.
$46k-75k yearly est. 15d ago
Lead fabricator fitter and layout for steel fabrication shop
The Steel Erection Company
Fabricator job in Orange, CA
Job Description
We are seeking a skilled, safety-focused Steel Fitter/Fabricator to join our growing team. The ideal candidate has experience reading shop drawings, laying out, and fabricating structural steel components - with particular skill in stair and railing work.
Must read shop drawings to fabricate, fit, and weld stairs, railings, and structural components. Not entry level - must work independently with minimal supervision. 3+ years shop or field fabrication experience required. MIG/TIG/Stick proficiency.
Responsibilities
Read and interpret fabrication drawings and blueprints.
Layout, cut, fit, and weld steel components (stairs, railings, frames, supports, etc.).
Measure and verify work to meet specifications and tolerances.
Operate fabrication tools and equipment (saws, drill presses, grinders, welding machines).
Maintain a safe, clean, and organized work area.
Collaborate with team members to meet deadlines and quality standards.
Requirements
3+ years fabrication experience in a structural steel shop or field environment.
Proficient in MIG, TIG, and Stick welding (AWS D1.1 Structural Steel required).
Ability to calculate and cut compound angles (essential for stairs/rails).
Skilled in using tape measures, squares, protractors, and other layout tools.
Strong understanding of steel grades, sizes, and welding processes.
Ability to lift and handle heavy materials safely.
Preferred: Stair and railing fabrication experience.
Must pass a pre-employment screening.
Clean driving record preferred; CDL or company vehicle eligibility a plus.
Compensation & Benefits
Competitive hourly rate (based on experience).
Overtime opportunities.
Health, dental, and vision insurance.
Paid time off and holidays.
Advancement opportunities for high performers.
$31k-47k yearly est. 23d ago
Welder
Team Industrial Services, Inc. 4.8
Fabricator job in Long Beach, CA
Essential Job Functions * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern * Performs all duties as assigned and adheres to TEAM's Core Values
* Operates or tends welding machines that join or bond components to fabricate metal products and assemblies according to client and engineering specifications
* Reads, interprets and understands production schedule and specifications to plan tasks related to work orders and determine the appropriate welding equipment or method
* Establishes components for welding according to specifications
* Performs testing and inspection of welded surfaces and structures to discover flaws
* Maintains welding equipment to meet safety standards
* Completes documentation of welding activities
Job Qualifications
* High school diploma or equivalent preferred.
* Associate's Degree, training in Vocational school, or relevant industry experience required
* One (1) year of experience in machine welding and knowledge of orbital and automated welding required.
* Ability to pass a standard Code Welder exam required.
* Ability to operate GTAW, SMAW and GMAW welding equipment required.
* Ability to read engineering specifications preferred.
* Ability to work independently with minimal supervision.
* Possession of current TWIC card or ability to obtain a TWIC card required.
* Travel Requirements: 0% - 25
Work Conditions
* Position is based out of a branch or site location.
* Field duties require indoor and outdoor work in a plant atmosphere
* Interaction with other crew employees, as well as supervisors and client personnel
* Working in plant and/or shop areas around production machinery with extreme noise levels
* Must be able to wear safety equipment as required by the safety department for personal protection
* May be at more than one job site in a day and must be able to tolerate climate changes
* May be required to travel out of town on a periodic basis
Physical and Mental Requirements
* Ability to lift and carry 75 pounds
* Must be able to walk and climb except when performing non-field duties
* Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively
* Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations
* Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties
* Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations
* Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells
* Ability to maintain focus and multitask effectively
* Excellent communication skills
Additional Job Description
Anticipated compensation for this role is $52,000.00 - $72,800.00 per year plus benefits.
Note: Disclosure as required by Cal. Lab. Code § 432.3 of the pay range for this role when being hired into our locations in California. Team reserves the right to pay more or less than the pasted range. Actual compensation will be based on experience, qualifications, and geography.
$52k-72.8k yearly Auto-Apply 60d+ ago
Welder
Amada America, Inc. 3.8
Fabricator job in La Mirada, CA
Job Description
This position is responsible for welding accurate, quality parts according to instructions and within specified time frame, using the appropriate tools and/or equipment according to safety and quality standards. Candidate should be able to perform adjustments needed to ensure factory settings and specifications by using schematics, engineering documents and precedent to weld parts and submitting welded parts to quality control or appropriate team leader.
ESSENTIAL FUNCTIONS:
Fabricate parts as directed by Supervisor
Understand and perform weld machine setup
Understand and read blueprints
Perform accurate, quality fabrication in a timely manner
Submit fabricated parts to Quality Control.
Maintains tools, equipment, and workspace
Complies with Established Policies
Clock in and out of work orders.
NON-ESSENTIAL FUNCTIONS:
Regularly clean tools, equipment, and workspace throughout the shift.
Clean and detail tools, equipment, and workspace at the end of every shift.
Follow instructions regarding routine maintenance and/or treatment for tools, equipment, and workspace.
Complies with established procedures.
Manages time and resources by using company resources in order to maximize productivity and accomplish tasks on time.
Demonstrate commitment to an Injury-Free Environment by actively participating in company safety programs.
Comply with all aspects of the corporate environmental, health and safety program.
SKILLS:
MIG welding experience is required (3 year minimum).
TIG welding experience a plus.
Blueprint reading.
PAY RATE:
Staring at $26.00/HR
REPORTING RELATIONSHIP:
Supervisor
MENTAL ABILITIES:
Ability to work harmoniously with others
Ability to accept and follow instruction
Ability to maintain positive attitude
LIFTING: Average Weight: 25 lb. Frequency: Daily
Creating Peace of Mind by Pioneering Safety and Security At Allegion, we help keep the people you know and love safe and secure where they live, work and visit. With more than 30 brands, 12,000+ employees globally and products sold in 130 countries, we specialize in security around the doorway and beyond. Additionally, in 2024 we were awarded the Gallup Exceptional Workplace Award, which recognizes the most engaged workplace cultures in the world.
Spot Weld Helper
We Celebrate Who We Are!
Allegion is committed to building and maintaining a diverse and inclusive workplace. Together, we embrace all differences and similarities among colleagues, as well as the differences and similarities within the relationships that we foster with customers, suppliers and the communities where we live and work. Whatever your background, experience, race, color, national origin, religion, age, gender, gender identity, disability status, sexual orientation, protected veteran status, or any other characteristic protected by law, we will make sure that you have every opportunity to impress us in your application and the opportunity to give your best at work, not because we're required to, but because it's the right thing to do. We are also committed to providing accommodations for persons with disabilities. If for any reason you cannot apply through our career site and require an accommodation or assistance, please contact our Talent Acquisition Team.
Allegion plc, 2023 | Block D, Iveagh Court, Harcourt Road, Dublin 2, Co. Dublin, Ireland
REGISTERED IN IRELAND WITH LIMITED LIABILITY REGISTERED NUMBER 527370
Allegion is an equal opportunity and affirmative action employer
Privacy Policy
$30k-41k yearly est. Auto-Apply 13d ago
Welder
Amada Holdings Co., Ltd.
Fabricator job in La Mirada, CA
This position is responsible for welding accurate, quality parts according to instructions and within specified time frame, using the appropriate tools and/or equipment according to safety and quality standards. Candidate should be able to perform adjustments needed to ensure factory settings and specifications by using schematics, engineering documents and precedent to weld parts and submitting welded parts to quality control or appropriate team leader.
ESSENTIAL FUNCTIONS:
* Fabricate parts as directed by Supervisor
* Understand and perform weld machine setup
* Understand and read blueprints
* Perform accurate, quality fabrication in a timely manner
* Submit fabricated parts to Quality Control.
* Maintains tools, equipment, and workspace
* Complies with Established Policies
* Clock in and out of work orders.
NON-ESSENTIAL FUNCTIONS:
* Regularly clean tools, equipment, and workspace throughout the shift.
* Clean and detail tools, equipment, and workspace at the end of every shift.
* Follow instructions regarding routine maintenance and/or treatment for tools, equipment, and workspace.
* Complies with established procedures.
* Manages time and resources by using company resources in order to maximize productivity and accomplish tasks on time.
* Demonstrate commitment to an Injury-Free Environment by actively participating in company safety programs.
* Comply with all aspects of the corporate environmental, health and safety program.
SKILLS:
* MIG welding experience is required (3 year minimum).
* TIG welding experience a plus.
* Blueprint reading.
PAY RATE:
* $24.00-$29.00
REPORTING RELATIONSHIP:
Supervisor
MENTAL ABILITIES:
* Ability to work harmoniously with others
* Ability to accept and follow instruction
* Ability to maintain positive attitude
LIFTING: Average Weight: 25 lb. Frequency: Daily
$24-29 hourly 50d ago
Metal Welder and Fabricator
Embee Powered By Taber, LLC
Fabricator job in Santa Ana, CA
We have a strong custom metal department, and we are looking to expand. We are willing to train and mentor anyone qualified for the position.
Proficiency in TIG and MIG welding skills
Bonus points for expertise in welding brass and copper
Extensive knowledge in fabrication processes
Experience welding aluminum, stainless steel and steel
Ability to communicate effectively with supervisors, discussing challenges and collaboratively brainstorming solutions to enhance productivity
Benefits:
401(k)
Health insurance
Schedule:
8+ hour shift with overtime
Work setting:
In-person
Ability to commute/relocate:
Santa Ana, 92705: Reliably commute or planning to relocate before starting work (Required)
Salary: $25-$35/ hour depending on experience
We look forward to meeting you to see if you'd be the right fit here!
THIS IS AN ONSITE POSITION. No agencies and local candidates only.
Due to the high volume of candidates, we are unable to respond to all inquiries.
*************************
$25-35 hourly 43d ago
Welder
Sa Recycling 4.5
Fabricator job in Los Angeles, CA
SA Recycling is looking for a Welder who will be responsible for repairing and maintaining a metal recycling shredder and other metal recycling equipment as needed. The welder will be responsible for fabricating and joining metals and other materials, using the appropriate equipment; following all established safety precautions; have the ability to work at heights and with odd angles; have a steady hand and a great attention to detail. Knowledge of different kinds of metal and their properties is also highly desired.
This position will work outside in varying weather conditions, and SA Recycling strictly adheres to all Metals Recycling Business Health, Safety, and Environmental standards.
Pay range: $20-$25 depending on experience.
SA Recycling offers:
* Competitive Pay
* Full time positions with Medical, Dental, Vision, and Life Insurance
* 401k with a Company Match
* Weekly Pay
* Referral Incentives
* Company provided uniforms and PPE
* Eligible for Safety and Profitability Bonuses
RESPONSIBILITIES OF WELDER
* Performs repair and maintenance assignments for a metal recycling shredder and other industrial equipment.
* Welds various steel components with ARC and MIG welding equipment.
* Cut, trim, fit and fabricate metal components to fit specific dimensions.
* Perform related work such as flame cutting, bending, forming, beveling, notching of metal and plastic parts.
* Maintains accurate records of all work performed.
* Work from prints, drawings, and verbal instructions.
* Maintain a clean, safe work area in compliance with Corporate / OSHA Standards.
QUALIFICATIONS OF A WELDER
* High school diploma or GED; graduation from a trade school preferred.
* 5+ years' experience in welding processes such as MIG, stick, and torch welding on a variety of materials.
* Recycling industry experience preferred.
* Advanced knowledge of welding fabrication tools and techniques.
* Knowledge of federal, state, and local job site health and safety rules, regulations, and best practices; understanding of potential job hazards.
* Ability to safely work at varying heights, in tight quarters, and varying positions.
* Bi-lingual (English and Spanish) a plus.
Physical Requirements
* Work Environment: scrap metal facility office
* Equipment & Tools: PC, MS Office Suite, Dispatch software
* Physical Demand Level: Light to Moderate
* Work Capacity: Welder Work Capacity
* Sensory Demands: Hearing & vision
* Hand Movements: Repetitive motions, keyboard
PLEASE NOTE: The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required.
An offer of employment by SA Recycling is contingent on the satisfactory completion of a post-offer drug screen, physical exam, and background check with a credit check (if position specified).
All US applicants must be 18 years of age or older.
$20-25 hourly 49d ago
Welder
Taylor-Dunn Manufacturing LLC
Fabricator job in Anaheim, CA
Waev Inc. is an electric mobility OEM founded in 2021 to manufacture, distribute, market, and support the GEM, Taylor-Dunn and Tiger brands. GEM was the first commercially-produced, street-legal low-speed vehicle in the United States. GEMs shuttle people and goods across city centers, residential communities, government campuses, colleges and universities, and other micro-environments. Founded in 1949, Taylor-Dunn burden carriers, personnel carriers, and stockchasers have been trusted solutions in a broad range of commercial environments and provide premium reliability, safety features, and all-electric efficiency for industrial grade applications. Tiger heavy-duty tow tractors have been towing cargo, baggage, parcel, and other equipment in ground support applications since 1981. Waev's headquarters and factory are located in Anaheim, California.
Duties and Responsibilities:
•Perform welding tasks based on production schedules.
•Inspect all parts prior to and following entering workstations assigned to; immediately report non-conformance issues to group leader and/or Supervisor.
•Perform quality testing and documentation as required.
•Accurately complete paperwork required for production records, including: labor reporting, move tickets, SPC charts etc.
•Maintain regular, reliable attendance.
•Follow all safety rules and regulations strictly and maintain a clean and orderly work area.
•Maintain a consistent pace throughout the shift with focus on quality (i.e., within applicable quality standards). ·
•Rotate between workstations as assigned.
•Perform duties assigned by Supervisor and/or Group Leader.
•Work overtime as required and mandated by production schedules.
Physical Requirements:
•Ability to lift up to 40 lbs and push/pull up to 100 lbs.
•Ability to bend, twist, turn, kneel, and squat.
•Stand and walk up to nine hours per day, work overtime as needed and reach overhead continuously.
•Work safely around moving equipment, power tools, and industrial vehicles.
-Repetitive use of upper extremities.
-Good hand-eye coordination and dexterity
-It may be necessary to perform any of these functions up to twelve hours a day.
Job Requirements:
•18 years of age or older.
•1+ years of industry weld experience
•Ability to read and understand routings, work orders and production reports necessary.
•Detail-oriented
$35k-51k yearly est. Auto-Apply 60d+ ago
WELDER III
Marvin Engineering Comp 4.3
Fabricator job in Inglewood, CA
Defense contractor involved with product development and manufacturing of various systems for military aerospace and vehicles in the Los Angeles International Airport area is searching for an experienced Welder. With a 50+ year foundation, The Marvin Group supports all branches of the Department of Defense and allies around the globe on an array of programs and platforms. We support many military prime contractors including Lockheed Martin, Northrop Grumman and Raytheon.
RESPONSIBILITIES
Read Blueprints and Drawings and take or read measurements to plan layout and procedures
Safety First!
TIG Weld experience a must.
Tack weld and submit for inspection verification prior of completing the welding op.
Follow instructions provided by Supervisor/ Engineering.
Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements)
Operate angle grinders to prepare the parts that must be welded
Align components using calipers, rulers etc. and clamp pieces
Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead)
Maintain equipment in a condition that does not compromise safety.
Keep area clean, use lean and 6'S.
Be on time, can do attitude!
Welder Level I-II-III will be set base on experience or special skills.
SKILLS / REQUIREMENTS
Proven experience as welder
Must be a AWS Welder certified to weld steel and aluminum, or have a current / still valid certification.
TIG weld a must
Minimum of 5-8 years' experience.
Experience using a variety of welding equipment and procedures (TIG, MIG etc.)
Experience in using electrical or manual tools (saws, squares, calipers etc.)
Ability to read and interpret Blueprints technical documents and drawings
Knowledge of relative safety standards and use of protective clothing (face-shield, gloves etc.)
Deftness and attention to detail
Professional Certification (e.g. an AWS welding certificate) will be a plus. (Must be able to certify IAW MEC Welding Procedures)
Must be able to lift up to 35 lbs
Must be able to speak/read/write English.
Wear PPE at all times
This position must meet export control compliance requirements. All applicants must be “U.S. persons” within the meaning of ITAR, as defined: a U.S. Citizen, a lawful permanent resident, political asylee, or refugee.
Interested parties please apply online and submit resume to **********************************
Visit us at marvingroup.com
$34k-48k yearly est. Auto-Apply 60d+ ago
Welder
Now Hiring
Fabricator job in Cerritos, CA
Job Responsibilities
Perform MIG, TIG, and/or spot welding on carbon steel and stainless steel components used in switchgear assemblies.
Read and interpret blueprints, weld symbols, and fabrication drawings.
Prepare materials for welding, including cutting, grinding, fitting, and fixturing.
Inspect welds for accuracy, penetration, appearance, and overall quality; correct deficiencies as needed.
Maintain dimensional tolerances critical to switchgear fit-up and assembly.
Operate fabrication equipment such as grinders and saws as required.
Follow all safety procedures, including PPE requirements.
Work collaboratively with assembly, quality, and engineering teams to meet production schedules.
Maintain a clean and organized work area in accordance with 5S standards.
Support continuous improvement initiatives related to quality, efficiency, and safety.
Other duties as assigned and needed
Required Experience and Qualifications:
High School diploma/GED and a minimum of 5 years of experience in a related field. Welding certificate a plus.
Exposure to warehouse environment (able to stand for long periods of time, able to move product as required).
Knowledge of various safety standards such as OSHA and any state safety standards
Knowledge of industry standards such as NETA, OSHA, IEEE and NFPA
Proven mechanical skills and/or experience with different types of low and high voltage equipment (requirement varies on location).
Able to effectively solve problems.
Basic computer skills for data entry, looking up information, and/or creating reports.
Able to communicate oral and written communication skills; follow directions-written direction, oral direction, reading work orders and/or specs as assigned; work in a team environment and communicate with team, various departments, and/or Customers as business needs dictate.
Customer Focused-able to meet deadlines, work on multiple projects, and produce a quality work product
For positions that utilize a company vehicle, you will be required to have a valid driver's license.
Able to read blueprints and drawings along with taking measurements to plan layout and procedures
Able to determine the appropriate welding equipment or method based on requirements
Able to set up components for welding according to specifications
For positions that utilize a company vehicle, you will be required to have a valid driver's license.
Who we are!
RESA Power is a dynamic, people first organization that prides itself on being the employer of choice in its industry! RESA is fortunate to have an extraordinarily talented group of people who take pride in everything they do! RESA Power has locations throughout the United States & Canada. We are a trusted service provider committed to ensuring the safety, performance, and compliance of electrical distribution systems. With a track record of long-term partnerships and excellence in customer experience for nearly a decade!
Our Mission
Ensure reliable and safe mission-critical power across our customers' electrical infrastructure lifecycle.
Our Vision
To be the premier, first-choice, trusted provider in the US and Canada for critical power services and products by delivering the best customer and employee experience in the industry.
Core Cultural Competencies
We do it right
We pride ourselves on our integrity and expertise. We don't cut corners.
You perform job responsibilities safely, efficiently, and thoroughly all day, every day.
You conduct yourself professionally, ethically, and honestly.
You display sound judgment and decision-making skills. You avoid choosing courses of action that assume
unreasonable risk to yourself or the Company.
You are on time and preplan time off.
You produce a quality product.
We are customer driven
Our number one concern is our customers and our long-term relationships with them prove our dedication.
You approach job responsibilities with enthusiasm, professionalism, and in a customer focused manner.
You promote goodwill by handling all contacts (example: coworkers, management, vendors, customers,
etc.) with respect, courtesy, cooperation, attentiveness and following instructions from management.
We focus on growth
We are dedicated to growing the company and our employees.
You understand & apply your knowledge of techniques, policy, procedures, equipment, and skills involved in the job.
You seek out new assignments and assume additional duties.
You seek to expand your abilities (certifications, continuing ed, OTJ experience, etc.).
We solve problems
Every day is different, so we need to be innovative, decision makers, flexible and adaptable.
You efficiently and thoroughly complete assignments.
You perform work assignments independently.
You propose new ideas and find better ways of doing things.
We get it done
We are efficient, reliable and no nonsense. We work hard, but we also play hard.
You follow through on commitments in a timely way.
You produce easily understandable and accurate reports that meet customer and/or Company expectations.
You actively listen. You seek advice and help as appropriate.
You can effectively deliver messages to a variety of individuals (RESA employees, vendors, customers, etc.).
We build strong relationships
Our leaders are servant leaders. We provide you with the support of a well-run company, but the
connectedness of a family. We collaborate with each other and our customers.
You collaborate to create the best solutions for each other and our customers.
You build strong relationships within the team, across RESA departments and locations and with
customers and vendors.
Additional Information
Travel: Up to 5%
Physical Demands: Lifting to a maximum of 50 lbs. without assistance or use of a lifting aid, crawling, climbing, standing for long periods of time, and working in non-ideal conditions. Repetitive motion using tools for welding.
RESA Power is an equal opportunity employer.
Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, or veteran status.
$35k-52k yearly est. 13d ago
Welder
HMT Tank 4.3
Fabricator job in Santa Fe Springs, CA
About HMT
HMT is the global leader in aboveground storage tank solutions. HMT brings a distinct level of innovation and service to the tank industry through a unique approach of partnering with customers to optimize tank operations. Knowing that every customer's need is different, we use our decades of experience to customize solutions that help tank operations become more efficient, more productive, and more profitable.
We are looking for a capable Welder who will be responsible for cutting and joining metals and other materials at our facilities or construction sites, using appropriate equipment. Your job will be to provide safe foundation for strong infrastructure.
You should be competent in using potentially dangerous equipment following all safety precautions, have a steady hand and great attention to detail. Knowledge of different kinds of metal and their properties is also required. We will provide PPE, FRC, tools and equipment. We will also pay and train on safety.
Welder responsibilities are:
Explore and follow blueprints and drawings, taking measurements to plan layout and procedures
Prepare the appropriate welding equipment or method based on requirements
Prepare components for welding according to specifications (such as powered saws to match measurements when cutting material)
Use angle grinders to prepare the parts that must be welded
Use calipers, rulers etc. and clamp pieces to align components
Use manual or semi-automatic welding equipment in various positions to weld components
Check welded surfaces and structures for flaws by testing and inspecting them
Keep your equipment in a condition that does not compromise safety
Travel is required (75%+)
Required Qualifications:
Minimum 5 years' experience as a Welder using Flux Core (FCAW) and Stick (SMAW)
Must have 2 years' experience in Tank Welding
Must be able pass 2G/3G/4G Welding Test 7018/6010
Must have reliable transportation
Must be willing to work overtime and weekends
TWIC Card
Preferred Qualifications:
Solid experience using a variety of welding equipment and procedures, such as Flux Core and Stick able to use the automatic welding equipment The Goat and the 3 o clock
Experience with cutting torch and arc gouging
Solid experience using electrical or manual tools, such as saws, squares, calipers and so on
Excellent knowledge of relative safety standards and willingness to use protective clothing, such as face-shield and gloves
Good ability to read and interpret technical documents and drawings
Agility, professionalism, and close attention to detail
Successful completion of a relevant apprenticeship program is required
Professional Certification, such as AWS welding certificate, will be a bonus
HMT is an Equal Employment Opportunity Employer. We will not tolerate discrimination because of race, color, religion, sex, age, national origin, military or veteran status, mental or physical disability, genetic information, gender, gender identity or expression, sexual expression, or any other unlawful reason. All qualified applicants are encouraged to submit applications for employment. Employment with HMT is At-Will.
$35k-49k yearly est. Auto-Apply 60d+ ago
Stainless Welder I
K & N Engineering 4.7
Fabricator job in Corona, CA
Essential Duties & Responsibilities:
Perform production line assembly and welding of mufflers and exhaust systems.
Responsible for quality craftsmanship and fabrication of exhaust components.
Perform visual product quality audit, manipulate product for visual check, ensures accurate selection of product by verifying parts received against a PTF.
Demonstrate job knowledge regarding location and identification of parts and numbering system.
Maintain the cleanliness and organization of the shop and its equipment and tools.
Performing other department duties as instructed by the department supervisor.
Qualifications
Experience, Skills and Education:
Minimum 1 year experience in exhaust fabrication, MIG welding and assembly.
Must be trained in MIG welding process.
Understand fixture assembly and process for welding.
Basic understanding of MIG welding machine set-up and adjustments.
Must be able to read a computer screen and have basic computer skills.
Must be able to follow verbal / written instructions correctly.
Additional Qualities Necessary:
Must be punctual and dependable at adhering to scheduled work hours.
Must demonstrate enthusiasm and foster a strong work ethic, showing pride and a positive attitude.
Must be willing to learn and develop new skills to broaden capability.
Demonstrated ability to perform work safely, to maintain high standards of work quality and to keep work area clean and free from hazards is mandatory.
Must be able to read technical work instructions and effectively communicate about work status/output, including necessary work-related information and cross functional project updates, to supervisor and other stakeholders, in English.
Must be able to: Stand or Walk up to 10 Hours; Bend Neck and Waist 10 hours; Twist Neck and Waist 10 hours; Grasp with hands up to 10 hours; Fine manipulation up to 10 hours; Reaching or Pulling up to 10 hours; Lifting 0-35lbs up to 10 hours; Lifting 10-50 lbs up to 6 hours.
Work Location and Schedule Information
This is an onsite position located in Corona, CA; you must have reliable, daily transportation to and from our facility
We work a Monday-Thursday 4/10 schedule; our work hours are 4:00am-2:30pm
Our work environment contains machinery and may cause exposure to dust
We are an equal opportunity employer and value diversity in our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.
$41k-53k yearly est. 13d ago
WELDER
Nationwide Environmental Services
Fabricator job in Norwalk, CA
Job DescriptionSalary: $23 - $28 per hour
Mig Welding, Plasma Cutting and Fabricating
Dental, Life, Medical, Retirement
$23-28 hourly 19d ago
Fabrication Assembler (80638)
The Gill Corporation 3.9
Fabricator job in El Monte, CA
Who we are:
The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced plastics including interior sandwich panels for creating structures such as aircraft galleys and bulkheads, honeycomb core and related products.
The Gill Corporation is seeking a Fabrication Assembler with experience in production assembly, high attention to detail, accuracy, and efficiency. Key qualities to be successful in this role are to be a team player, willingness for hands-on learning. This position assists the department supervisor in various day-to-day work activities within the fabrication department and will complete rework activities per the direction of the Operations Engineering.
Reporting to the Production Supervisor they will perform but not be limited to the following responsibilities.
Responsibilities:
Primary duties include finishing detailed panel assembly and liners.
Uses specifications, blueprints, mylar and work orders.
Deburrs and cleans insert drill holes prior to insert installation.
Applies adhesive to plugs/ sleeves and panel prior to plug/ sleeve installation.
Prepares panel assemblies for edge fill operation.
Mixes and applies adhesive to the undercut/edge of panels.
Hand routes with pneumatic hand router all detailed liners using the specified tool required.
Records all material and logs information on work orders and in SAP software.
Other essential duties may be assigned.
Shift Requirement and Compensation for this role:
2nd shift 2:00pm-10:30pm
Training will be conducted on 1st Shift 5:30am - 2:00pm
Compensation: Base Rate starting at $22.15 an hour.
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Required Qualifications:
1 - 3 years of assembly or manufacturing experience
Must be able to read and know how to use blueprints and work orders.
Must have basic computer skills and knowledge.
Experience in Aircraft manufacturing a plus.
Construction, carpentry and forklift experience a plus.
Must have a high school diploma, GED or equivalency
Must have English reading and verbal communication skills sufficient to read, understand and communicate the company operating procedures and policies.
Must be able to lift, push and pull a minimum of 50 lbs.
Must be able to demonstrate math proficiency equal to or greater than required for the position applied.
Must be available to work the shift specified by the position and be flexible to potential overtime on weekends/ holidays.
ITAR Requirement:
This position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A “U.S. person” according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee.
The Gill Corporation is an Equal Opportunity Employer
. Applicants for all job openings are welcome and will be considered without regard to race, religious creed, color, age, sex, gender identity, gender expression, genetic information, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, veteran status, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances.
The Gill Corporation provides reasonable accommodations
to qualified individuals with disabilities in accordance with the Americans with Disability Act and applicable state and local law. If you require an accommodation in the application process, please notify the Human Resources Department
The average fabricator in Torrance, CA earns between $29,000 and $54,000 annually. This compares to the national average fabricator range of $27,000 to $44,000.
Average fabricator salary in Torrance, CA
$39,000
What are the biggest employers of Fabricators in Torrance, CA?
The biggest employers of Fabricators in Torrance, CA are: