Fabricator jobs in Utah

Fabricates and assembles structural metal products, such as framework or shells for machinery, ovens, tanks, stacks, and metal parts for buildings and bridges according to job order, verbal instructions, and blueprints. Creates layout and outlines sequence of operations, applying knowledge of trigonometry, stock allowances for thickness, machine and welding shrinkage, and physical properties of metal. Locates and marks bending and cutting lines onto work piece. Sets up and operates fabricating machines, such as brakes, rolls, shears, flame cutters, and drill presses. Hammers, chips, and grinds work piece to cut, bend, and straighten metal. Preheats work pieces, using hand torch or furnace. Positions, aligns, fits, and welds together parts. Designs and constructs templates and fixtures. Verifies conformance of work piece to specifications, using square, ruler, and measuring tape. May fabricate and assemble sheet metal products. May set up and operate machine tools associated with fabricating shops, such as radial drill press, end mill, and edge planer. Essential Duties and Responsibilities include, but are not limited to: Produce parts per shop router and customer prints Set-up and operate equipment Perform preventative maintenance on equipment and tooling Adhere to precise processes Take measurements Detect nonconformities Document actions by completing production and quality logs Other duties as assigned Qualifications: Experience and Education: 1-2 years of relevant experience High school degree or equivalent, plus advanced training Technical Skills: Excellent attention to detail Working knowledge of customer specifications and requirements Basic computer skills Problem solving abilities Ability to use calipers, micrometers, etc. Mastery of basic math (addition, subtraction, multiplication, division, and fractions) Strong teamwork and communication skills to get along with co-workers and be a team player Understand and obey safety requirements Commitment to keep work area clean and free of debris Physical Requirements: Must be able to lift and/or move up to 50lbs Specific vision abilities include close and distance vision, depth perception and ability to adjust focus Ability to use hands to finger, handle, or feel, as well as reach with hands and arms for extended periods of time Capable of standing for long periods Supervisory Responsibilities: None. Travel Required: N/A Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the employee(s) will possess the skills, aptitude, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety to themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an at will relationship. Affirmative Action/Employment Opportunity (EEO) Statement: ALIGN PRECISION is an equal opportunity employer and values diversity at our company. We are committed to creating a workplace where all qualified individuals are welcome and can thrive, regardless of race, religion, color, national origin, gender, sexual orientation, gender identity, age, marital status, veteran status, disability status, or any other characteristics protected by law.

Get ready to grow with us! Northwest Pipe Company is the nation's leading manufacturer of water infrastructure products-and with over 50 years of experience, we're just getting started! Our business is growing, and we're looking for great people to grow with us. We're immediately seeking a Exact 2500 MBK Machine Operator - Second Shift - to join our Geneva Pipe and Precast team in Salt Lake City, UT . WE OFFER: * Medical, Dental, Vision, Life, and AD&D Insurance (1st of month after hire) * Paid Vacation, Holidays, and Sick Time * Weekly Paycheck * 401k Retirement Savings Plan with Employer Match * Bonus Potential * Tuition Reimbursement * Safety Footwear and Eyewear Voucher (day 1 of employment) * Employee Assistance Program * Opportunities for Career Advancement * Values-Driven Culture Committed to Diversity, Inclusion, and Safety OUR VALUES: * Accountability is evident when we do what we say we are going to do and people accept responsibility for their actions. We do not point fingers and blame others. We own our actions. * Commitment is not only promising to do something, but actually investing in the necessary effort and actions to make it happen. * Teamwork is essential for competing in a challenging and constantly changing business environment. Working together across all job functions is critical to achieving our success. ABOUT THE JOB: The Exact 2500 Operator is responsible for operating, maintaining, and troubleshooting a steel cage welding machine that produces steel reinforcement for concrete pipe assembly. Will handle day-to-day operation with efficiency and productivity. ESSENTIAL FUNCTIONS AND MAJOR RESPONSIBILITIES: * Operating of the Exact 2500 to meet production & quality standards * Mathematically inclined for conversions from inches to metric * Mechanically inclined including but not limited to pneumatic, hydraulic or electronics * Coordinate schedule with the Production Supervisor * Responsible for use and care of all equipment * Schedule and perform routine preventive maintenance on machine. * Adhere to OSHA safety guidelines and use all necessary PPE * Review the work area for safety hazards or unsafe conditions * Ordering, tracking supplies, equipment and replacement parts. * Regular, reliable and predictable attendance is necessary in order to perform the essential functions of this position. KNOWLEDGE, SKILLS, ABILITIES: * Regular use of hand tools & power tools * General knowledge of equipment and machinery * Forklift and Crane use and certifications. * Coordinate the flow of materials for machine. EDUCATION/EXPERIENCE: * High School diploma or GED would be preferred * 1-2 Years of using the referenced products and procedures Northwest Pipe Company is committed to equal employment opportunity. Veterans and individuals with disabilities are encouraged to apply. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. Our organization maintains a drug-free workplace. Except where prohibited by state law, offers of employment may be contingent upon the successful completion of a background check, drug test, and/or physical examination, as determined by the essential functions and physical requirements of the position. Northwest Pipe Company reserves the right to close the position, with or without notice, if a qualified candidate is identified prior to the close date. PHYSICAL DEMANDS/WORK ENVIRONMENT: The physical demands described here are representative of those that must be meet by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Project timelines and work volume / deadlines may often require working outside of standard office hours, weekend, or evening work. Regular, reliable and predictable attendance is necessary in order to perform the essential functions of this position. Physical Activity Over 2/3 of the time: * Standing/Sit: Remaining upright in a stationary position, particularly for sustained periods. * Walking: Moving about to accomplish tasks, particularly for long distances or moving from one work site to another * Talking: Expressing or exchanging ideas by means of the spoken word; those activities where detailed or important spoken instructions must be conveyed to other workers accurately, loudly, or quickly. * Hearing: Perceiving the nature of sounds at normal speaking levels with or without correction, and having the ability to receive detailed information through oral communication, and making fine discriminations in sound Up to 2/3 of the time: * Kneeling/Crouching: Position self to move items, pick up tools and cleaning up work area * Grasping: Applying pressure to an object with the fingers and palm to use hand tools * Communicating: Expressing or exchanging ideas and information accurately, in written or diagram form. * Fingering: Picking, pinching, typing or otherwise working, primarily with fingers rather than with whole hand or arm as in using hand tools * Repetitive Motions: Making substantial movements (motions) of the wrists, hands, and/or fingers such as doing paperwork during walk in process Less than 1/3 of the time: * Stooping: Positions self to 90 degrees (This factor is important if it occurs to a considerable degree and requires the full use of the lower extremities and back muscles.) * Climbing: Ascending or descending ladders, Stairs, scaffolding, ramps, poles, and the like, using feet and legs and/or hands and arms. Body agility is emphasized. (This factor is important if the amount and kind of climbing required exceeds that required for ordinary locomotion.) * Balancing: Maintaining body equilibrium to prevent falling when walking, standing or crouching on narrow, slippery or erratically moving surfaces. (This factor is important if the amount and kind of balancing exceeds that needed for ordinary locomotion and maintenance of body equilibrium.) * Pushing: Using upper extremities to press against something with steady force in order to thrust forward downward of outward * Lifting: Raising object from a lower to a higher position or moving objects horizontally from position to position (this factor is important if it occurs to a considerable degree and requires the substantial use of the upper extremities and back muscles) Physical Requirements Medium work: Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Visual Acuity The worker is required to have visual acuity to perform an activity such as: Preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection) using measurement devices, and/or assembly or fabrication of parts at distances close to the eye. Vision Requirements Over 2/3 of the time: * The worker is required to have peripheral vision (ability to observe an area that can be seen up and down or to the left and right while eyes are fixed on a given point) * The worker is required to have depth perception (three-dimensional vision, ability to judge distances and spatial relationships) * Up to 2/3 of the time: * The worker is required to have distance vision (clear vision at 20 feet or more) * The worker is required to have the ability to adjust visual focus (ability to adjust the eye to bring an object into sharp focus Less than 1/3 of the time: * The worker is required to have close vision (clear vision at 20 inches or less) Weather Condition Over 2/3 of the time: * The worker is subject to outside environmental conditions: No effective protection from weather. * The worker is subject to both environmental conditions: activities occur inside and outside * The worker is subject to extreme heat: Temperatures above 100 degrees for periods of more than one hour. (Consideration should be given to the effect of other environmental conditions such as wind and humidity.) Less than 1/3 of the time: * The worker is subject to extreme cold: Temperatures typically below 32 degrees for periods of more than one hour. (Consideration should be given to the effect of other environmental conditions such as wind and humidity.) * The worker is subject to noise: There is sufficient noise to cause the worker to shout in order to be heard above the ambient noise level. * The worker is subject to vibrations: Exposure to oscillating movements of the extremities or whole body * The worker is subject to hazards: Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals * The worker is subject to atmospheric conditions: One or more of the following conditions that affect the respiratory system of the skin: Fumes, odors, dusts, mists, gases or poor ventilation * The worker is subject to oils: There is air and/or skin exposure to oils and other cutting fluids * The worker is required to wear a respirator Noise Levels Up to 2/3 of the time: * Moderate noise (examples: business office with computers and printers, light traffic) * Loud noise (Examples: metal can manufacturing department, large earth-moving equipment) Less than 1/3 of the time: * Moderate noise (examples: business office with computers and printers, light traffic) * Very loud noise (examples: jack hammer work, front row at rock concert) Supervision Received General Supervision: The incumbent normally receives little instruction on day-to=day work and receives general instructions on new assignments.

As a key member of the Mountain States Steel team, you will work with a team of shop production professionals. This position requires laying out and fitting fabricated components to assemble structural buildings and bridge girders according to blueprints and knowledge of welding. o Select equipment, plan layout, assembly, and weld. o Apply knowledge of geometry, physical properties of metal machining, weld shrinkage, and other welding techniques. o Layout position, align and fit components together. o Bolt, clamp, tack, and weld parts to secure position for welding. o Position may require product repair by dismantling, straightening, reshaping and reassembling parts by using a cutting torch, straightening press and hand tools. o Must have structural steel fitting experience. o Must have the ability to read structural steel blueprint drawings and weld symbols. Weld test required: 1G or 3G 1” vertical 7” long 1/4 “ root opening 1/16 flux core (hot) inner/dual shield Since 1949, Mountain States Steel has been supplying and installing custom fabricated structural steel for construction projects throughout the Western United States. From highway bridges to athletic stadiums and power plants, Mountain States Steel has provided structural steel that has allowed millions of people speed along major highways and freeways to enjoy sporting events in either a spectacular sports arena or the comfort of their home in front of the television. Mountain States Steel is an industry leading steel fabrication contractor committed to providing our customers with the highest quality service in the steel fabrication industry. Mountain States Steel offers competitive pay, health, dental and vision insurance, paid holidays and paid time off.

Description: Intermountain Electronics (IE) is a leading provider and manufacturer of custom engineered Process, Electrical Control and Power Distribution turn-key solutions to the Data Center, Industrial, Power/Utility, Oil & Gas, Mining industries in North America. Our products range from large scale one-off custom Power Distribution, Control and Process systems to standard off-the-shelf electronic/electro-mechanical components. Reporting directly to the Fabrication Supervisor, we are currently seeking a Metal Fabricator for our Nightshift to be based at our Price, Utah facility. Why you will love working at IE: You will love the challenge, interesting and varied work, and endless opportunities, but most importantly you will love working with a team of fun loving, driven, and generous go getters that take deep personal pride in being part of a family that is building the infrastructure that powers the world. Benefits: Competitive salary PTO (Paid Time Off) Paid Holidays (10) Medical and Dental Plans Teladoc 24/7/365 Access to U.S. Board Certified doctors Employee Assistance Program Company Paid Life Insurance Supplemental Vision, Life, STD & LTD Insurance 401K- Company match up to 6% of base salary. Health Savings Account (HSA) with available company match up to $2000 based on family size. Paid Parental Leave Schedule: Afternoon/Night Shift - 3p.m. - 1:30 a.m. / M-Th How does a four-day work week sound to you? Would you like to have the freedom to enjoy more time spent doing the things you want to do, while making great money and working for an innovative, growing company? Too good to be true? Not anymore! Position Summary: Fabricate, lay out, position, align, fit parts and assemble structural metal products such as framework or shells for machinery, and metal parts using a welder, cutting torch, grinder, brake press, etc. by performing the following duties: Essential Functions: Layout Review, analyze and understand engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout. Understands layout and plans sequence of operations to maximize efficiency of production in terms of time, quality, quantity, resources, and overall costs. Verify conformance of work pieces to specifications, using squares, rulers, and measuring tapes. Understand various weld form symbols on blueprints and drawings. Designs and constructs templates and fixtures. Welding/Fabrication Positions, aligns, fits, and welds together material pieces to AWS specifications. Weld using MIG welder and pulse process; weld components in flat, vertical, horizontal or overhead positions both vertical and horizontal plane Tack up structures to meet tolerances and specifications. Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools. Remove high spots and cut bevels, using hand files, portable grinders, and cutting torches. Hammers, chips, and grinds work piece, cut, bend, and straighten metal. Tools and Equipment Operate MIG welder. Set up and operate shear and break press, punch press. Use overhead crane, forklift, hoists, to assist in fabrication assembly and moving materials/projects. Operate, grinders, cutting torch, drills, misc. hand tools. Properly care for and maintain tools in good operating condition; ensure tools and equipment is properly stored at the end of each shift. Other Essential Duties Maintains regular and consistent job attendance, comes to work on time. Follows and complies with IE Core Values Follow and comply with IE safety program. Other Duties Install electrical components in pre-cut panels, wire as needed. Wash, prime, paint parts for electrical units Reasons you will love Price, Utah The location. Google image search. 'The Wedge, San Rafael Swell', 'Manti La Sal National Forest', '9 Mile Canyon'. Pretty, right?! All that stuff is just 20 to 45 minutes away. If you like the outdoors, we have a huge variety of recreation options in the local deserts and mountains. You will have front door access to some of the best hunting, fishing, mountain biking, camping, ATVing, and outdoor living in the nation. In ten minutes from town, you can be on top of a beautiful mesa without a soul around for miles. Small town charm with easy access to any city life you might desire. Price is any other rural town in the west when it comes to amenities, but it's only an hour away to the Provo/Salt Lake City valley should you need more. Most importantly, the community has a ton going on. Price and nearby Helper have a huge number of events taking place nearly every weekend. From the growing art scene in Helper, First Friday's, and near monthly festivals and community events, you'll regularly have something to do and stay entertained. Tired of the dreaded "I'm bored" from the kids? The community schools and recreation departments offer a huge variety of competitive traditional sports outlets, as well as a bunch of non-traditionals as well, (think mountain biking and archery). Cost of living goes a long way in what seems like an ever more expensive world. Price, Ut has some of the most affordable housing you could ask for and your commute will be no longer than 10-12 minutes max. Stop worrying and start living your best life, in Price, Ut with Intermountain Electronics. "Utah ranking No. 1 best state overall from U.S. News and World Report comes on the heels of receiving the top spot for best economic outlook for the 16th year in a row in Rich States, Poor States: ALEC-Laffer State Economic Competitiveness Index. " Requirements: Knowledge, Skills and Abilities High School Diploma or GED, plus 2 years welding fabrication experience or an equivalent combination of education and experience Able to discern correct welding applications Must be proficient in MIG welding Essential “rigging” knowledge is necessary Good math skills necessary in transferring print information to the fabrication process Ability to read and interpret shop/engineering drawings Arrive to work, meetings, appointments, and other work-related functions on time and as scheduled Ability to maintain positive working relationships with those encountered in the course of the work Frequently stand for prolonged periods, lifting/moving of up to 100 pounds, pulling, pushing, reaching, grasping, kneeling, crouching, stooping, crawling and climbing ladders Able to fabricate and assemble metal buildings, products & parts Ability and skill to effectively operate a wide range of equipment, hand and power tools, overhead crane, forklift, torches, brake shear, power saws, drills, punch press, etc. Good verbal and written communication skills Customer focus Must be able to work as and with a team, take direction from supervisor(s), adhere to required work schedules, adjust easily to changes in midstream, focus attention on details and follow work rules Mentor fellow employees/teammates when the opportunity presents itself Must be able to climb to and work from elevated platforms, ladders and walkways A record of dependability and cooperation in previous work environments Ability to obtain and maintain current AWS (American Welding Society) certifications as required Metal Fabricator JD Date of Release 10/4/12 Revised 1/18/2013 INTERMOUNTAIN ELECTRONICS, INC. Job Description Job Title: Metal Fabricator Reports To: Fabrication Foreman/Lead Fabricator FLSA Status: Non-exempt Location: All Department/Division: Fabrication Dept. Job Grade: Date Prepared: Updated 9/2012 Prepared By: HR

Graco manufactures and markets premium equipment to move, measure, control, dispense and spray a wide variety of fluid and powder materials. What does that mean? Well, we pump peanut butter into your jar, and the oil in your car. We glue the soles of your shoes, the glass in your windows and the screen on your phone. We spray the finish on your vehicle, coatings on your pills, the paint on your house and texture on your walls. Graco is part of your daily life. Where You'll Work - White Knight Fluid Handling Inc., a subsidiary of Graco, Inc. White Knight was established in 1995 and has consistently developed and manufactured high-quality products. We are a leading supplier of pumps and fluid transfer technology to the semiconductor, Solar Cells, LEDs, flat-panel displays, electronic and industrial markets. Ready to join us? JOB SUMMARY The Welder position requires preparing materials, performing various welding techniques, maintaining equipment, and ensuring work meets quality standards and safety regulations. We're looking for reliable, detail-oriented, hard-working, team player, career-minded individuals to help build our great team. ESSENTIAL DUTIES Weld plastic parts, creating full sealing welds while meeting production quotas Maintain a clean, safe work area. Perform daily maintenance of machines as required and keep supervisor informed of necessary maintenance beyond operator ability Must read and understand layouts, job packets and blueprints for the parts being welded (includes Geometric Tolerancing) Monitor inventory levels and ensure steps are taken to avoid lack of inventory Measure parts during production to ensure parts match blueprints. This may involve the use of comparator, calipers, gages and related test instruments Perform necessary side operations as required (i.e., deburring, PFA tube bending). Work as a team member to aid all shifts and support personnel to operate to departmental standards including quality and productivity goals Other duties as assigned. POSITION REQUIREMENTS Essential Qualifications: Education/Certifications High School diploma, or equivalent Plastic Welding experience is preferred. Skills/Abilities/Competencies Ability to perform a sequence of operations under minimum supervision and consistently maintain the performance levels set for quality and quantity Understanding of standard safety rules and regulations to prevent unsafe set-ups, operations, or acts which might cause injury to self, others, or environment Ability to work through daily operational activities Good interpersonal, written and oral communication skills Ability to plan effectively and execute the plans Strong mechanical aptitude Strong problem solving and troubleshooting skills Physical Requirements Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. In terms of an 8-hour workday, "occasionally" means 1 to 33%, "frequently" means 34 to 66% of the time, and "continuous" means 67 to 100% of the time. In an 8-hr workday, must be able to stand 4 hrs., and walk 4 hrs. Position requires frequent bending and stooping, occasional use of fixed or portable stairs, crouching and kneeling and reaching above the shoulder Must occasionally lift and load up to 45 lbs. or greater Requires frequent repetitive elbow movements and simple grasping with both hands and occasional firm grasping and fine manipulation with both hands: (lifting, dexterity, coordination, mobility, etc.). $20-$27 per hour, depending on experience. At Graco, you truly make a difference. Your unique talents contribute to our organizational growth and future. Not only do you make a difference, but Graco's culture empowers employees to create their own career path. Whether you choose to advance within your current department or explore new opportunities in different divisions, you have the ability to build your future. Our managers are here to provide support and guidance as you continue to grow within your career. Graco has excellent opportunities available to individuals who want to be part of a fast-moving, growing company that is committed to quality, innovation and solving fluid handling problems for our customers. Graco is proud to be named a Best Place to Work by Fortune Magazine in 2016, 2018, 2019, 2021 & 2022. Graco offers attractive compensation, benefits and career development opportunities. Graco's comprehensive benefits include medical, dental, stock purchase plan, 401(k), tuition reimbursement and more. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit ************************* The base pay range for this position is listed below, exclusive of fringe benefits or other compensation. If you are hired, your final base hourly rate will be determined based on factors such as geographic location, skills, competencies, education, and/or experience. In addition to those factors, we will also consider internal equity of our current employees. Please keep in mind that the range provided is the full base salary range for the role. Hiring at or near the maximum of the range would not be typical to allow for future and continued salary growth. $24.10 - $25.95

ABOUT US: Leading metals manufacturing company JENNMAR is seeking to fill Welder positions at its plant in Clearfield. Primary duties include performance of MIG, TIG, and stick-weld processes to operate welding equipment/machines. At JENNMAR fabrication takes place in our more than twenty strategically located manufacturing facilities associated with our affiliated brands. From bolts and beams to channels and trusses, to resin and rebar, and more, JENNMAR is uniquely positioned to accommodate our customers' industrial fabrication needs. EDUCATION/EXPERIENCE: * HS/GED/Vo-Tech Welder Certification Required; * AWS Certification A plus; * One-to-Three (1-3) Years MIG, TIG, Stick-weld Experience Preferred or a combination of education and experience; * ISO experience a plus. JOB REQUIREMENTS: * Dependability to be consistently at work and on time with ability to work 40+ flexible schedule including weekends; * Fundamental listening, verbal, and written communication skills; * Functional math skills including knowledge of fractions and decimals; * Ability to verify product dimensions using micrometers, calipers, and other precision measuring instruments; * Special, form, and depth perception with finger and manual dexterity to perform welding processes; * Repetitive standing, twisting, reaching, squatting capability during normal phase duties; * Close visual acuity, near/far vision, and multiple limb coordination * Moderate/heavy lifting capability (up to 65 lbs.) * Team member mentality with ability to follow safety and standard operating procedures with a quality assurance mindset and adherence to proper PP requirements * Excellent benefits include medical with a standard PPO plan with deductibles as low as $1,500 and wellness credit up to $750; free concierge primary care; voluntary 401k plan currently matching up to 12%; voluntary dental and vision plans; free telemedicine services; basic life, long and short term disability coverage. EOE M/F/D/V

Job Description SHOP WELDER/FABRICATOR Fineline Steel Fabrication has immediate openings for SHOP WELDERS/FABRICATORS to work at our steel fabrication facility. Previous experience with .045-1/16 wire welding process is a plus as well as experience with structural steel fabrication. This is a full-time position, must be able to work overtime as needed. Must be able to pass a pre-employment drug test, pass a background check and have reliable transportation to get to and from work. Personal welding equipment and tools are required. Training will be provided. Qualifications: Proficient in assigned welding techniques Ability to read and comprehend shop drawings Running iron worker, plasma cutter, band saw Interpretation of drawings, including weld requirement symbols Working knowledge of fixturing and weld set up (amps, volts, etc.) Conventional and precision measuring instruments Process inspection, certification, and documentation Welding equipment maintenance Finish grinding applications using manual and power tools Safety and housekeeping Certifications are not required and can be completed in-house Must be able to pass pre-employment drug test and pre-employment background check Work Hours: Monday-Thursday from 6:30 AM - 4:30 PM. 10 hours per day, minimum of 40 hours per week and overtime as necessary or until work is completed. Related Safety Responsibilities: Must become familiar and compliant with Fineline's safety program and OSHA regulations. Must maintain fitness level sufficient to handle his/her required work load. Understands, is familiar with, and follows equipment safety requirements. Is always vigilant and aware of his/her own safety as well as the safety of those around him/her. Management Discretion: The job duties and requirements that this document describes may be altered or supplemented at any time at the sole discretion of the employer. Equal Employment Opportunity for All: Fineline Steel Fabrication embraces federal employment guidelines regarding equal opportunity and affirmative action. It is the policy of Fineline Steel Fabrication to provide equal employment opportunity to all qualified applicants and employees. Fineline Steel Fabrication is an affirmative action employer and does not unlawfully discriminate on the basis of race, color, religion, gender, national origin, age, disability, or veteran status in any condition of employment including, but not limited to, recruitment, hiring, training and promotion.

Job Description Welder/Fabricator (4/10 work week) Rustica is currently hiring an experienced Welder/Fabricator who will work on various metal hardware projects throughout the manufacturing process. This position will report to the Metal Manager, and will be responsible for producing high-quality, functional hardware and custom doors. Responsibilities: Welding and fabricating door and hardware components to precise specifications. Ensuring high-quality workmanship through meticulous attention to detail. Utilizing a variety of welding techniques, including MIG welding (required) and TIG welding (preferred). Working with various metals, such as steel, aluminum, and stainless steel. Collaborating with other team members to achieve project goals. Maintaining a clean and organized workspace. Requirements: Verifiable welding experience required MIG experience required, TIG experience a plus Must be able to build product from an engineered drawing Ability to lift approximately 60 lbs. frequently throughout the shift Ability to stand 8-10 hrs./day Benefits: Paid Sick and Vacation time Paid Holidays Excellent insurance options including: Medical, Dental, Vision, Disability, and Life

Are you a skilled Welder with a passion for precision and a commitment to quality craftsmanship? Do you thrive in a supportive, team-oriented environment where your expertise directly contributes to significant projects? BHI, a nationally recognized and respected leader in construction and fabrication, is seeking a dedicated Welder to join our local team in Ogden, Utah. This vital Welder role offers a competitive hourly wage of $18-$22 per hour, commensurate with experience. The schedule is M-F 6 am to 430 pm. At BHI, we believe in developing our people and providing for families, which is why we offer a comprehensive benefits package including health, vision, dental insurance, life insurance, a 401k plan, and paid time off (PTO). You'll work in our local shop, contributing to a positive work environment where strong communication, efficiency, and safety are paramount. If you're a detail-oriented Welder ready to grow with a company that values its employees and their pride in work, your next career move is with BHI. We are seeking a dedicated Welder to contribute to our success. Qualifications We are seeking a proficient Welder who meets the following: * Proficiency with MIG and stick welding is required. * Performance plate test required at time of job interview. * Ability to read and understand blueprints. * Knowledge of proper use of hand and power tools (grinders, plasma cutter, etc.). * TIG welding experience is a plus. About B.H. Inc. For over 50 years, BHI has grown from humble beginnings into a nationally recognized and respected name across diverse industries, from complex underground utilities to robust civil construction and specialized fabrication. Our mission is to be the recognized and respected name in the industries we serve, a goal achieved through the dedication of every employee. We foster a team-oriented atmosphere where strong communication, efficiency, and exceptional customer service are paramount. We cultivate a positive work environment where every Welder and team member is valued, supported in their growth, and encouraged to excel. Join a company where safety is a core value, and your contribution directly impacts our collective success, reinforcing our commitment to our employees and their families. Ready to Weld Your Future with BHI? If you are a driven Welder eager to contribute to a thriving team and build a lasting career, we want to hear from you! Apply now through our 3-minute, mobile-friendly application! BHI is an EEO employer, including disability and vets. Applicants must be authorized to work for any employer in the United States. We are unable to sponsor or take over sponsorship of an employment Visa at this time. #INDSJ2

TempToFT Welding metal aluminum boxes for industrial electrical control panels. Structural welding of 4g, and 3g welds building frames for E-Houses. Will have to pass weld test. Pay Rate: $18-$25 DOE Wage will be determined on weld test Swing Shift: 4:00 pm to 2:00 am with ½ lunch Monday - Thursday Responsibilities: Welding materials using the correct materials to join metal together Measuring and cutting materials to specifications Reading and understanding blueprints prior to starting a project Sourcing the materials to be used in the project Checking finished work to make sure it falls within the tolerance marked on the blueprints Qualifications: Knowledge of various welding techniques Knowledge of manual and mechanical welding techniques Excellent communication skills, both verbal and written Ability to read blueprints Knowledge of metallurgy Be able to meet the physical demands that welding will require 20.00

Job DescriptionCome join a growing company with great professional and financial opportunities! Responsibilities: Manufacture and fabricate finished metal products. Install and repair various equipment and components. Read and interpret project plans, blueprints, and other written instructions and diagrams. Follow blueprints to meet product specifications. Calculate material measurements to verify specifications. Conduct tests to evaluate weld quality and tolerance. Qualifications: Previous experience in welding, manufacturing, or other related fields. Ability to certify a 3G test using 3/8 Plate and 1/16 wire. Familiarity with welding tools and procedures. Familiarity with engineering blueprints and schematics. Ability to handle physical workload. Experience with PowerFab is a plus, but not required. Benefits: 401(k) Plan With Matching. Paid Time Off. Paid Holidays. Medical. Dental. Vision. Short-Term Disability. Long-Term Disability. Life Insurance. Employee Assistance Program. Tuition Reimbursement. Referral Program. Health Savings Account. Professional Development Assistance.

Job Description Welders needed for our Salt Lake City Branch: ASME Pressure Vessel Manufacturing Must be able to pass 3G vertical up weld test using a GMAW process. Blueprint reading helpful but not required. Advancement opportunities. Apply Directly at: ********************************************************************************** Welder testing and requirements: Testers should bring their own gear prepared to take a welding test I.E., welding hood, welding gloves, welding jacket/welding sleeves. We will supply safety glasses and ear plugs on arrival. Weld test is on ½” plate vertical up pulse mig hard wire .052 wire once test is complete. #1 Visual inspection #2 X-ray If it passes, we will start them at 24.00 dollars per hour. Desired experience Pulse mig welding, grinding, tig welding, layout, blueprint reading, fit up experience on round vessels, hand burning, back gouging (air arc) Job Type: Full-time Pay: $20.00 - $24.00 per hour Expected hours: 40 per week Benefits: 401(k) 401(k) matching Dental insurance Health insurance Health savings account Life insurance Paid time off Vision insurance Shift: 8 hour shift Weekly day range: Monday to Friday Ability to commute/relocate: Salt Lake City, UT 84104: Reliably commute or planning to relocate before starting work (Preferred) Experience: Welding: 1 year (Preferred) Work Location: In person #hc125703

Job DescriptionSalary: Malcolm Drilling has been innovating and leading the deep foundation industry for over six decades. As part of our deep foundations, retention systems, and ground improvement services, we also provide a range of special applications and dewatering techniques. By implementing Design/Build, we execute projects quickly and effectively, allowing for timely collaboration with owners and contractors. We offer these services nationwide, through our regional offices. Job Title:Shop Welder/Fabricator Location:Salt Lake City, Utah Responsibilities: Perform MIG, TIG, and Stick welding to fabricate and repair foundation drilling equipment. Read and interpret blueprints, schematics, and detailed drawings to accurately fabricate parts and assemblies. Utilize various metalworking tools such as grinders, saws, and plasma cutters to shape and prepare materials for welding. Inspect, maintain, and repair drilling rigs and associated equipment. Diagnose and troubleshoot mechanical and structural issues to ensure the safe and efficient operation of drilling rigs. Collaborate with the maintenance team to schedule and perform routine maintenance tasks. Conduct thorough inspections of welds and fabricated components to ensure compliance with quality standards and specifications. Adhere to all safety protocols and guidelines to maintain a safe working environment. Maintain accurate records of work performed, including materials used and time spent on each project. Assist in planning and prioritizing fabrication and repair projects to meet deadlines and production schedules. Coordinate with engineers, project managers, and other team members to ensure seamless project execution. Manage inventory of welding and fabrication supplies, ensuring adequate stock levels and timely reordering. Qualifications: High school diploma or equivalent; technical certification in welding or fabrication preferred. Minimum of 3-5 years of experience in welding and fabrication, preferably in the foundation drilling or heavy equipment industry. Proficiency in MIG, TIG, and Stick welding techniques. Strong knowledge of metal properties, welding symbols, and blueprint reading. Ability to operate and maintain various welding and metalworking tools and equipment. Excellent problem-solving skills with the ability to diagnose and repair complex mechanical issues. Strong attention to detail and commitment to quality workmanship. Ability to lift and carry heavy materials and equipment (up to 50 lbs). Capable of standing, bending, and working in various positions for extended periods. Comfortable working in a shop environment with exposure to noise, dust, and welding fumes. Valid drivers license is required. Benefit Package:Local operators union or Malcolm benefit package Schedule: Full- Time Travel: As Needed Malcolm Drilling Company, Inc. is an Affirmative Action/Equal Opportunity Employer of Minorities, Females, Protected Veterans, Individuals with Disabilities, and a Drug-Free Workplace.

Job DescriptionDescription: Rocky Mountain ATV/MC has an exciting opportunity for a new team member to join our Brands department as a Welder I. For over 35 years, Rocky Mountain ATV/MC has grown to become one of the world's largest providers for power-sport enthusiasts - having the largest selection of riding gear and parts available. Rocky Mountain ATV/MC is not just a distributor, we are also gear testers, product developers, manufacturers of off-road parts/components, and one of the powersports industries leading resources for instruction and demonstration. There has never been a better time to start your career with us! In 2021, Rocky Mountain ATV/MC became a 100% Employee-Owned Organization. Come join us as an Employee-Owner and work with the best in a fast paced, exciting industry. Do you love powersports? Do you want to work for a company with a fun and rewarding environment? Rocky Mountain ATV/MC is that company, we are comprised of powersports enthusiasts just like you. We currently have amazing opportunities for dynamic and dependable individuals who want to share their passion and experience. GET READY. As a colleague at Rocky Mountain ATV/MC, you can enjoy benefits and perks including: Employee Stock Ownership Program (ESOP) Competitive compensation with regular bonuses Excellent tuition reimbursement, graduation bonus and ZERO interest education loans for all employees Delicious onsite cafeterias with discounted meals Excellent Medical, Dental, Vision, and Voluntary Life insurance plans 401K with company match PTO and holiday pay Wellness programs and discounted local gym membership Powersport and wellness race/participation reimbursements Generous employee discount on thousands of products Career advancement, professional development, and opportunities to grow Schedule: Monday-Thursday 3 pm-1:30 am What you will do in this role: Production welding Fabricating Fitting Work collaboratively and cooperatively with others, committing to a workplace of teamwork, dignity, and respect Other duties as assigned. How you will thrive in this role: Proven experience using wire feed MIG machines (steel and aluminum TIG welding experience a plus) Experience with precise cutting, grinding, and drilling is necessary Ability to read and understand printed specifications and drawings Ability to work safely, using the appropriate protective equipment for each task Self-motivated, detail oriented and able to work independently or in a team environment Ability to understand, read, and/or comprehend instructions and directions including different numbers and specifications. Must be able to work scheduled hours Be a collaborative team player who is willing to work with others and independently Strong work ethic focused on commitment, pride of work, quality, desire to learn, and dependability. Physical Requirements: Position performance will require the regular physical ability to walk and function in elevation changes by means of self-propulsion, including steps, ladders, and varied walking and working surfaces. Ability to negotiate warehouse work areas in a safe manner and with good behavior. Vision abilities specific to the position will include close vision, peripheral vision, depth perception, and the ability to focus. Performing in this role will require the use of hands to use and handle tools, objects, materials, and controls. Performance requires the frequent ability to sit, talk, hear, stand, climb, balance, stoop kneel, crouch, or crawl. Employees will need to be able to read, write, and understand the basics of the English language. Employees may have to lift and/or move up to 25 pounds and up to 45 pounds assisted or if capable. Equality: Rocky Mountain ATV/MC is proud to be a company of inclusion, belonging, and fairness. We rely on our colleagues to collaborate and have a voice, and perspective. We embrace everyone and are proud to be an equal-opportunity employer that does not discriminate on the basis of race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity/expression, veteran status, or genetic information or any other category protected under applicable law. Requirements:

Sterling ATM is a Utah based manufacturing company located in Salt Lake City, Utah with a focus on manufacturing ATM enclosures for financial institutions nationwide and our easy to use Bean Trailer. We are seeing rapid growth in our Bean Trailer division and we are looking for an exceptional Production Assembler who is enthusiastic about their work and passionate about being a team member to help the company continue to grow. Our Bean Trailer was voted, “Coolest Product Made in Utah” in 2020 and winner of the 2020 manufacturer of the year award. Our Bean Trailers are an off road, tear drop trailer and are built to withstand rugged terrains. They are equipped with a Timbren Independent suspension, Max coupler hitch and off road tires. This will definitely get the job done. What You'll Bring: Good work ethic Self-motivator who needs little direction, find solutions instead of problems, bring new ideas to the table Awesome with hand tools and know your way around a shop and are mechanically minded Ownership in your work Consistently on-time What We Offer: Generous PTO Health and Dental Insurance with HSA 401k with a match up to 4% Flexible work environment Ability to use a Bean Trailer at 6 months of continued work history Paid Holidays Requirements Experience with TIG welding Experience with MIG Welding experience welding aluminum 1-2 years of experience in production welding or any other field

Position Type: Full-time, Non-exempt Systems Application & Technologies, Inc. (SA-TECH) is a progressive and well-established Department of Defense (DoD) contractor specializing in Range operations and maintenance (O&M); weapons testing; facilities management; aerial, ground and seaborne targets O&M; technical, logistics and other engineering support; systems integration; electronics and communications maintenance services; and a growing cybersecurity business. We are highly focused and, among other efforts, currently operate a dozen active test and/or training ranges for the Army, Air Force and Navy. Our 35-year heritage is founded on supporting complex and diverse DoD programs and we've developed a standout reputation for providing the highest quality services, superior workmanship and cost-effective results while achieving complete customer satisfaction. At Dugway Proving Ground (DPG), southwest of Salt Lake City Utah, SA-TECH supports the West Desert Test Center (WDTC), the nation's designated Major Range Test Facility Base (MRTFB) for chemical and biological defense. The WDTC plans, conducts, evaluates, reports, and supports Chemical and Biological (CB) and non-CB testing efforts for the Department of Defense (DoD), other federal agencies, private industries, and foreign Governments (e.g., environmental assessment/impact evaluations, weapons and munitions demilitarization, chemical energetics/homemade explosive testing, unmanned systems testing, direct and indirect fire weapons testing, hazard assessments, and technical/logistical support of operations at DPG). At DPG, SA-TECH is looking to hire a Welder onto our team to support program efforts and contribute to success at this major DoD Test Facility. Specific duties include (but are not limited to): Using brazing and a variety of arc and gas welding equipment, weld together metal components to fabricate or repair products such as machine parts, specialty test fixtures, support systems, chambers, transport trailers, and other test equipment items in support of the WDTC mission according to layouts, blueprints, or work orders. Weld metal parts together, using gas welding and/or brazing and any combination of arc welding processes. Perform related tasks such as thermal cutting and grinding. Repair broken or cracked parts, fill holes and increase size of metal parts. Position and clamp together components of fabricated metal products in preparation for welding. Other duties as assigned. Work Conditions: Work is mostly performed in an environmentally controlled office environment but occasional field work would expose you to the environment. May be required to lift and handle heavy items (50 lbs.) as well as use a variety of material-lifting equipment, such as forklifts etc. Must be able to lift 50 pounds unassisted. Must be able to wear appropriate Personal Protective Equipment (PPE) for work tasks that require such protective gear. Requirements Education/Experience/Skills High School diploma or equivalent. Experience as a welder, particularly using arc and gas welding equipment. Current American Welding Society (AWS) Certified Welder certification preferred. Brazing Certification for the materials and sizes being used is preferred. Current OSHA Safety Certification preferred. Experience with thermal cutting and grinding of metals. Must be able to work independently within prescribed limits with minimal supervision. A commitment to maintaining a productive and collaborative working environment. Current Driver's License required; must be able to be insured through company's vehicle insurance policy while driving work/government/rental vehicles during working hours, and for the duration of employment. U.S. Citizenship required and you must have a U.S. DoD Secret Security Clearance prior to hire date and maintain this clearance throughout employment. Must be able to pass a pre-employment drug screening and physical, as well as periodic retests. All candidates will be required to pass background screening to include SSN, Driver's Record, and a Criminal Background Investigation. Supporting Our Warfighters: As a highly regarded DoD employer, SA-TECH recognizes that our success is indicative of our team members' hard work and dedication towards a common goal… Supporting our Warfighters . Along with unparalleled stability, we have the ingredients for superior performance with a servant leadership mentality that provides an affirmation of purpose and value in a team-oriented positive work environment. As such, we provide a sense of family, competitive pay and employee benefits, along with a strong commitment to the professional development of our workforce and for providing broad career opportunities throughout the United States. SA-TECH offers: Employee Recognition Above-Average Compensation Competitive Benefits Ongoing Training and Development Career Advancement Opportunities Benefits Offered: Medical, Dental, Vision Life Insurance Long-Term Disability 401(k) match Flexible Spending Accounts EAP Education Assistance PTO and Holidays Vacation and Sick Leave Other Important Information You Should Know: By applying to this posting, you express interest in the position and may be considered for other opportunities within the company that match your skills. SA-TECH offers flexible work schedules depending on the program, alongside generous PTO benefits. The above are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel in this position. SA-TECH maintains the right to make changes to job descriptions whenever necessary. SA-TECH is an Equal Opportunity/Affirmative Action employer and evaluate all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, pregnancy, national origin, disability, or protected Veteran status. We participate in the E-Verify system to verify work authorization in the U.S. Applicants are encouraged to apply within 5-15 days of posting for optimal consideration. We prioritize a supportive work environment, professional development, and a healthy work-life balance and our pay and benefits aim to enhance employee well-being. If this culture resonates with you, we invite you to apply. If you're uncertain about your fit, please explore other roles on SA-TECH Careers . All responses will be handled with strict confidentiality. ** Please note that the provided salary information is a general guideline. SA-TECH considers factors such as (but not limited to) scope and responsibilities of the position, the candidate's work experience, education, training, and skills as well as market and business considerations when extending offers.

Job Description Are you interested in working for a company that fosters growth opportunities and a team oriented atmosphere? ProSteel Security Products fosters a work-life balance and offers competitive compensation and great benefits. Join our team! ProSteel Security Products as an Equal Opportunity Employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, or veteran status. SUMMARY The production schedule must be structured in a manner that maximizes production efficiencies with minimal downtime to meets customer needs. Reports to Welding Supervisor Ensures quality of all products produced and performs quality checks Maintains good housekeeping in areas assigned Works safely and follows all safety rules and operational procedures Understands all safety devices and their operation. Notifies management if safety devices are malfunctioning or missing prior to operation Safely operates all lifting devices per manufacturing specifications QUALIFICATIONS Mechanically Inclined. MIG Welding Detail orientated Able to work in a team environment Strong interest in continuous improvement Strong work ethic Strong oral and written communication skills Leadership skills Problem Solver Pre-employment drug screening High school diploma or general education degree (GED) PHYSICAL REQUIREMENTS Lifting- Up to 50 lbs. Standing-8 or more hours per day Body Positions- Squatting, bending, flexing and extending both arms Grasping- Both hands, up to 8 hours per day Sitting- Occasionally Pushing Effort Pulling MATHEMATICAL SKILLS Basic mathematical skills, addition, subtraction, multiplication Ability to read a tape measure. WORK ENVIRONMENT Manufacturing facility - exposed to heat and cold Personal Protective Equipment required at all times. Noise controlled environment. Activity level is high - continuous overhead crane and forklift movement PROSTEEL BENEFITS INCLUDE Full benefits package (Medical, Dental, Vision, Flexible Spending Accounts and Life Insurance) 401(k) with company match Paid Time Off (PTO)

Position Description - Welder I Company: Quality Steel Corporation Reports to: Department Manager Key Responsibilities : Ensure Safety First, Safety Always and meet or exceed Quality expectations. Inspect equipment to be utilized prior to shift start. Set and/or operate weld machines to manufacturer's specifications, meeting time budgets for finished product. Select, install, and position required fittings in accordance with Standard Work Instructions. Perform welds to meet all company and code requirements. Perform Quality Control. Visually inspect welds for defects. Report defects to Supervisor. Maintain machines and cleanliness of workstation. Experience: Minimum of one year welding experience, preferred. Knowledge, Skills, and Abilities: Ability to work efficiently in a fast-paced environment. Ability to work in various environmental conditions (heat, humidity, cold). Knowledge of welding and metal properties, electrical equipment, and manual tools/gauges. Ability to operate a MIG welder and set parameters as needed. Ability to safely lift/move up to 60 lbs. Ability to record data accurately and in a timely manner. Ability to receive and follow verbal and written instructions. Ability to work collaboratively with team members to accomplish departmental goals and improve operations. Education and Certification Qualifications: High School Diploma or GED Certified Welder License, preferred Quality Steel is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, color, religion, sex, sexual orientation, gender identity, national origin, age, status as a protected veteran, or disability.

Welders are often required to work outside in all kinds of weather. The ability to understand and communicate information is essential. Reports to the Facilities Manager who will report to Project Manager and Management. Qualifications: Be at least 18 years old and have a high school diploma or its equivalent, ability to communicate, training certificates, great work ethic. At Grant Mackay Demolition Company, we strive to deliver exceptional demolition services to our clients. Our commitment to excellence extends beyond just the completion of a project, as we aim to foster long-lasting relationships built on trust and satisfaction. Safety is always our top priority, and we take great pride in maintaining a secure and positive work environment for our employees and those around us. With a national reach, we have the capability to tackle complex demolition projects of varying scales and bring our expertise to communities across the country. Grant Mackay Demolition Company offers a competitive compensation and benefits package that includes medical, dental, vision, life, 401k, and other employee benefits.