Fabricator jobs in Winston-Salem, NC - 67 jobs

Job Purpose Honda Aero, in Burlington, North Carolina, is looking for a team member who is a Fabricator with GTAW experience responsible for the fabrication and welding of aerospace sheet metal and casting engine components. Possesses the welding ability to certify to Aerospace Specifications for thin stainless, nickel based (Inconel), and other aerospace sheet metal. Key Accountabilities Set-up and layout jobs using work instructions, diagrams and fixtures following procedures to fabricate and GTAW in all positions including the use of rotary turntables. • Sets up machines according to work instructions to trim, size, form, inspect, clean, and GTAW material to meet requirements. • Inspects, maintains and logs preventative maintenance on equipment needed for fabricating and welding. • Fabrication of shop aids and fixtures to assist fabrication and welding. • Quality checks using gauges, calipers, micrometers, height gauges, etc. • Weld evaluations for weld size, face and root reinforcement, cracks, inclusions, and porosity. • Must maintain internal skills matrix. • Must maintain HAI welding certifications. • Complies with internal quality system and regulatory requirements. • Lean Manufacturing, general housekeeping, work in a teaming environment, 5S and COP. • Cleans work area, tools, and equipment at end of shift. • Follow all business policies and procedures. • Performs other duties as assigned. Qualifications, Experience, and Skills Minimum Educational Qualifications HS diploma or GED. Minimum Experience Minimum of 5 years of hands-on Fabrication and minimum of 5 years of hands-on GTAW experience, both preferably in the aerospace industry. Knowledge of super alloy processing preferred. AWS or equivalent certifications preferred, but not required. Other Job-Specific Skills Ability to work independently and take on new challenges and assignments. Good attention to detail and eye/hand coordination skills. Uses mathematical and reading skills. Interprets specifications, blueprints, and work instructions. Working Conditions Climate-controlled production environment. Regular exposure to the manufacturing areas which under certain circumstances require the use of personal protective equipment such as safety glasses with side shields, mandatory hearing protection and safety shoes. Ability to frequently stand, walk, and sit as well as regular use of hands, fingers, and arms. Ability to lift up to 30 pounds.

• Lay out patterns and fabricate for sheet metal reducers, square to rounds, laterals, WY's and elbows. (Carbon, galvanized and stainless steel.) • Lay out galvanize ductwork. • Fabricate stainless steel (16 gauge) conveyor hoods and chutes. • Fabricate miscellaneous items such as guards, screens, covers and pans. • Measure, fabricate and install products. • Mentor less experienced fabricators. Qualifications • Must be able to work 8 to 10 hour days. • May be required to work some weekends and holidays. • Tig welding is a plus. What We Offer Supportive work environment Opportunity to learn additional skills as well as upward mobility Eight paid holidays Start earning two weeks of vacation first year Company paid life insurance, short and long term disability 401(k) match of 100% up to 4% Pre-employment drug test required. AC Corporation is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

The position of Metal Fabricator is responsible for constructing structures and sign cabinets out of raw materials. Construction of structures and sign cabinets out of aluminum, steel or other materials according to create individual custom signage according to customer specifications, shop drawings and blueprints Build various sign types including channel letters, awnings, walls signs, pylon signs, etc Use various equipment to cut, bend, turn, mill and drill to specified lengths and widths per work order. Interpret data to select materials, layout reference points and sequence of operations. Operate metal fabricating machines (shears, saws, breaks, bending machines, and punch and forming presses.) Weld, rivet or bolt components together (primarily aluminum.) Inspect parts for defects. Prep parts or move to other areas as appropriate. Review daily schedule requirements to determine priorities. Operates machinery and equipment including routers, welders, saws, air drills and power tools Interpret blueprint and sketches To become a part of our team we require applicants for our Metal Fabricator position to have the following qualifications: SKILLS Mechanical aptitude Basic mathematical skills, ability to read a tape measure Effective interpersonal, oral and written communications skills Ability to read blue prints and interpret sign/shop drawings and specifications Ability to multi-task and handle numerous projects simultaneously, time management EDUCATION High School diploma, GED or the equivalent of training, education and experience EXPERIENCE Two years of experience as Metal Fabricator, service or similar industry. Sign industry experience preferred Allen Industries offers all full-time employees competitive pay as well as an excellent benefit package including: medical, dental, vision, paid time off, paid holiday's, supplemental STD, LTD and Life insurance and 401K with company match. General Disclaimer: The duties listed above are intended only as illustrations of the various types of work that may be performed. Other duties may be assigned as needed by the Company. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change. Allen Industries is an Equal Employment Opportunity, Affirmative Action Employer. We consider applicants for all positions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital, disability or veteran status.

Team Penske is seeking an R&D Fabricator to support aerodynamic development through wind tunnel testing. This role is responsible for preparing vehicles and components to exact aero specifications, executing rapid modifications during testing, and ensuring smooth and efficient test operations. The ideal candidate has hands-on fabrication experience with metallic and composite materials, strong attention to detail, and the ability to perform in a fast-paced, development-focused environment. Responsibilities: Prepare vehicles and components for wind tunnel testing by building and finishing bodywork to aerodynamic specifications. Sand, paint, fit, and modify test components to ensure accuracy and repeatability during testing. Attend wind tunnel tests and perform quick, precise changes to components as directed by the aero group. Review wind tunnel test plans and proactively prepare tools, parts, and materials to minimize delays. Organize, load, and transport toolboxes, test components, and equipment required for wind tunnel sessions. Collaborate closely with aerodynamicists, engineers, and fabrication staff to support development objectives. Ensure all components meet NASCAR technical and quality standards prior to and during testing. Maintain accurate documentation of procedures, configurations, and changes made during test sessions. Maintain a clean, organized, and safe work environment in accordance with Team Penske standards. Qualifications: Wind tunnel testing experience in a motorsports or high-performance automotive environment. Familiarity with NASCAR technical inspection processes and compliance requirements. Proficiency with fabrication tools and techniques for both metallic and composite components. Experience using metrology equipment such as portable CMMs, scanners, and measurement tools. Strong attention to detail with the ability to work accurately under time constraints. Comfortable working independently with minimal supervision while remaining a strong team contributor. Effective communication skills and proficiency with computers and software including Outlook, Excel, and SharePoint. Willingness and ability to work flexible hours, including overtime and off-shift schedules as required

We are seeking a skilled Metal Fabricator to join our dynamic team. The ideal candidate will have a strong background in metal fabrication processes and be proficient in various techniques and tools. This role involves interpreting blueprints, operating machinery, and ensuring high-quality standards are met throughout the fabrication process. Responsibilities Read and interpret blueprints and technical drawings to determine specifications and materials required for projects. Operate a variety of machinery including press brake machines, plasma cutters, and other power tools to fabricate metal components. Perform welding tasks using FCAW (Flux-Cored Arc Welding) techniques to assemble metal structures. Execute pipe threading operations as needed for specific projects. Ensure compliance with industry codes and standards during all fabrication processes. Maintain a clean and safe work environment by following safety protocols and guidelines. Collaborate with team members to meet production deadlines while maintaining quality standards. Experience Proven experience in metal fabrication or a related field is preferred. Proficiency in blueprint reading and understanding technical specifications is essential. Familiarity with operating forklifts and other material handling equipment is a plus. Strong skills in welding, particularly FCAW, along with knowledge of pipe threading techniques. Experience using press brake machines and plasma cutting tools is highly desirable. Basic math skills are necessary for measuring materials accurately and calculating dimensions. If you are passionate about metal fabrication and possess the required skills, we encourage you to apply for this exciting opportunity to contribute to our team's success!

Discover your exciting role An entry-level position in a production environment with no prior experience required. In this area you'll form sheet metal into cylindrical and conical products and prep and fabricate stainless steel pipe and fittings for welding and coating. Explore your tasks and responsibilities Under close supervision you'll be introduced to a series of duties and responsibilities with increasing complexity to include, but are not limited to the following: * Set up work area, select and verify the materials for production, and meet daily production and quality demands in such specific areas as: Grinding; Rolling; Seam Welding; and Flanging. * Comply with health, safety (including OSHA), and environmental procedures, and ensures the cleanliness of the area. * Work in a team environment. * Continue to learn and expand one's own capacity within this job by increasing knowledge and skill base. * Perform various other assignments per lead person or supervisor direction. Show your expertise QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Entry-level position with training provided. Minimum high school diploma or equivalent. LANGUAGE SKILLS Ability to read and understand work instructions, technical documents (cut sheets), safety policies, company policies and procedures. Ability to complete written documentation. Ability to effectively communicate with co-workers and superiors. MATHEMATICAL SKILLS Ability to apply basic math skills including adding and subtracting whole numbers and fractions. Ability to accurately read a tape measure to 1/32". PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand and use both hands to finger, handle, or feel. The employee is occasionally required to walk and reach with hands and arms. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderately loud and hearing and eye protection are mandatory. Non-Solicitation We are not currently accepting third-party agency candidates for this position. Any agency candidate submitted to any employee of Exyte or TFS may be contacted by Exyte or TFS without obligation to the third-party agency. Employment Sponsorship Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor employment visas at this time. EEO Statement Exyte US, Inc. and its subsidiaries are proud to be an Equal Employment Opportunity employer that is committed to supporting an inclusive workplace where associates excel based on personal merit, qualifications, experience, ability, and job performance. We prohibit discrimination and harassment of any kind based on race, color, religion, age, sex (e.g., pregnancy, childbirth and related medical conditions, sexual orientation, gender identity), national origin, disability, genetic information, protected veteran status, or any other protected characteristic as outlined by applicable federal, state, or local laws. Contact: You want to be part of the Exyte team? We look forward to receiving your application! For further questions and information, please do not hesitate to contact via E-Mail at ********************** Please note that we only consider applications submitted through our application portal. Applications sent via email will not be considered due to data protection regulations.

This position is responsible for any fabrication necessary and on time production of parts. This position includes GMAW, MIG welding, grinding panels, fitting pipes and tightening them, cutting different materials on different machines and processes, and maintaining the upkeep as necessary on welding equipment. The focus of this position is producing quality fabricated to spec steel parts in a timely and satisfactory manner. Minimum Qualifications: (Education, Experience, Knowledge, and Skills): + Minimum 3 years of welding experience for level II. + Must be able to read, comprehend, and apply a WPS. + Capable of passing a steel plate GMAW fillet visual test in the 2F position, 1G GMAW test. + Must be able to set up oxyfuel and plasma torch as well as be able to make clean square cuts, straight cuts, beveled cuts, and wash welds. + Follow and advise on all safety procedures. + Advanced ability to comprehend and interpret sketches / blueprints. + Skilled in the safe and correct use of all hand tools. + Certified in the use of all overhead cranes and fork trucks. + Accurately read a tape measure and other measuring devices such as pressure gauges, fillet weld gauges, and levels. + Must have track record of consistent and timely attendance. + Ability to cooperate with a team and take directions from supervisors as well as other peers and level III welders. + Capable of operating the band saw, ironworkers, bench grinder, and port-a-band. + Must be competent enough to determine if their own work is complete and correct as specified by instructions, drawings and specifications. + Work independently or cooperatively with little hands-on instructions. + Must have a solid understanding of weld joints and weld symbols. + Ability to interpret blueprints / engineering sketches and correctly assemble them. + Must be able to perform routine machine maintenance and trouble shoot issues. + Ability to operate welder and replace gas cylinder or other parts. + Ability to use hand and power tools. Job Duties and Responsibilities: + The main function of this role is the welding and grinding of skids, tanks, SCR stands, and cable trays. The welder will reference engineering documents to guide them in the building of structures and the fabrication of parts. + Additional responsibilities and objectives will be added as needed based on business and area of needs. Physical Demands and Work Environment: + Must be able to lift 50lbs, manipulate heavy test equipment, and cables. + Manual dexterity to operate digital equipment, including computers and PLC's, protective relays, controllers, and other such equipment with small fine buttons and operators. + Required to stand and walk for extended periods of time on the manufacturing floor throughout the day. + The work environment associated with this role can take place either indoors or outdoors depending on the nature of the project. Tolerance for various weather elements may be necessary. This is an active manufacturing setting; at times it will be noisy, and equipment will be moving. "The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this position. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required. Management reserves the right to assign or reassign duties and responsibilities at any time, based on business needs." About Us PowerSecure, a Southern Company subsidiary, is a leading provider of innovative energy solutions to electric utilities and their industrial, institutional, and commercial customers. Join Our Power Team! (https://cloud.3dissue.com/***********37/242401/HR-9-14-2020/index.html) We invest in high-value and cost-effective benefits for our employees. Our benefits package includes: + Medical, dental, vision and life insurance coverage + Competitive pay and a matching 401 (k) plan + Vacation, Company Holidays, Paid Time Off (PTO- personal and sick days) + Flexible spending accounts/Health savings account + Wellness Incentive Programs + Employee Referral Program + Tuition Reimbursement PowerSecure is an equal opportunity employer where an applicant's qualifications are considered without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other basis prohibited by law. This position is not open to third party recruiters. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. We're Coming Back Together To Be Together 100% In Office At Vulcan Materials, we believe that the heart of our success lies in the strength of our engagement, our connection, and our commitment to developing our people. We are excited to restore the collaborative in-person environment that fuels our innovation and growth. This move is not just about being physically present; it's about reigniting the spirit that comes from face-to-face interactions, fostering a collaborative, inclusive culture where every voice is heard and everyone thrives. What You'll Do: Promote Safety. Take an active role in prioritizing safety in accordance with MSHA and Vulcan standards throughout the plant for yourself and others at all times. Become Familiar with Tools and Equipment. Use a variety of hand and power tools in performing duties. Learn to Diagnose Problems. Learn to diagnose problems, replace or repair parts, detect and replace defective components, test, and make regular adjustments. Learn to Weld. Perform highly diversified duties to install and maintain production machines. Plan, lay out, install, and repair a wide variety of complex equipment. Perform Maintenance. Perform a variety of maintenance and carpentry functions. Learn to perform regular preventative maintenance on machines and plant facilities. Complete Apprenticeship Program. Attend and successfully complete a three year apprentice program that includes a classroom setting. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Education. High School Diploma or GED is required. Technical school is preferred. Functional Knowledge. Must have thorough knowledge of welding material, welding properties, and various types of metals. Must be able to interpret blueprints. Must be able to wire feed welding machines to hard face and fabricate and repair liners. Welding Skills. Must have welding experience. Must be able to perform brazing, welding, arc-welding, and cutting tasks. Flexibility. Must be willing to work overtime and extended hours depending on customer and company demands. Must be able to work outside in all types of weather conditions and tolerate being exposed to loud noises. Mechanical Skills. Must have some knowledge of industrial tools, their uses, and maintenance. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is that the work we do impacts daily lives - and every employee contributes. The aggregates we produce are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs, and helping our employees meet their goals, as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our policy as it relates to the use of temporary staffing agencies, placement services and professional recruiters.

AC Corp is a Crete United company. As part of this nationwide network, we join an emerging leader in energy efficiency who is focused on making the places where we work, live, and play healthier. Together, we offer customers a multi-service solution to address needs across HVAC, plumbing, electrical, network cabling, security, access control, and building automation. Trust Crete United and AC Corp to make every community better and built-environment more sustainable. If you want a career with an organization that prioritizes the physical and mental health of its people and their communities - a single source sustainability powerhouse, look no further. AC Corporation seeks a manufacturer/welder for our Greensboro fabrication shop to cut, grind, weld and drill material.Job description AC Corporation seeks a manufacturer/welder for our Greensboro fabrication shop to cut, grind, weld and drill material. Qualifications: Must have ability to weld to a qualified procedure using SMAW (STICK), GTAW (TIG) and MIG Ability to weld aluminum, stainless steel and carbon steel - heavy gauge (16 to ½ inch) Ability to read and understand blueprints Able to use hand tools (measuring tape, level and channel lock) Physical Requirement: Able to work 10 hour days and weekends Stand, walk and climb stairs up to 12 hours per day Stoop, bend, turn, twist and reach repeatedly throughout day Lift and carry up to 50 lbs up and down ladders repeatedly Able to work in cold and hot environments Benefits: Company provided tools Medical, dental, and vision insurance benefits 401K plan Vacation and sick leave Job Type: Full-time Salary: $18.00 - $21.00 per hour Benefits: 401(k) Dental insurance Health insurance Life insurance Paid time off Vision insurance Schedule: 8 hour shift Monday to Friday Experience: Welding: 4 years (Required) License/Certification: Driver's License (Required)

Watch this video to learn more about Pureflow! NC WELDER About Our Organization: With over 38 years of experience providing high purity water solutions, Pureflow is committed to serving clients by designing, building, installing and maintaining water purification systems in a broad range of commercial and industrial markets. We understand that a successful business needs quality employees. We are seeking highly talented and motivated candidates to join our company where people, integrity, and excellence are essential to our culture. About the Position: We are seeking a Welder whose job responsibilities include, but are not limited to, the following for water purification and treatment systems and equipment: Job Responsibilities: Join, fabricate, and repair metal and other weldable material by applying appropriate welding techniques Interpret blueprints, specifications, diagrams, or schematics to determine appropriate welding process May position pieces to be welded into jigs, holding fixtures, or guides using measuring instruments and hand tools Operate welding equipment, regulates current and voltage or gas and wire flow rates for proper penetration and fusion of materials Obtain maximum weld strength, avoiding distortion and excessive weld at joints Inspect completed welds to determine structural soundness May assist Installation Department staff in installing new, central water systems at customer sites Maintain extraordinarily neat work areas, including shop, work sites, and vehicles, as applicable Qualifications: 2 or more years welding experience (steel fabrication & pipe welding) Familiar with commonly-used welding concepts, practices, and procedures High school diploma or GED Welding Certification preferred Strong mechanical aptitude Self-motivated, results-oriented, organized, energetic, and capable of staying cool under pressure from multiple ongoing projects Working Conditions: Majority of work performed in industrial shop setting Occasional work performed in industrial customer facilities Travel possible, with 3 overnight stays per month on average Ability to lift up to 100 lbs. Disclaimer: May perform other duties, as assigned Reports to: Installation/Fabrication Manager Benefits: Competitive base salary Comprehensive Benefits: Medical, Dental, Vision, Life Insurance, Health Savings Account (with company contributions), and more $1 for $1 401k match up to 4% 9 Company-paid holidays Generous personal time off that increases with tenure Education assistance Employee referral bonus program Ongoing training and development by internal and external industry experts Pureflow is an equal-opportunity employer and requires post-offer, pre-employment drug tests and background checks on all positions.

Reads blueprints/ drawings Takes/ reads measurements Operates machinery such as grinders, band saws, etc. Loads metals parts/ tubing into fixtures Aligns parts using calipers, rulers, clamps, etc. Ensures proper fitment of parts Tack welds parts together MIG & TIG welds parts under supervision of more experienced welders Stages jobs for Welder II's and III's Assists Welder's II & III's as needed Other duties as assigned. Requirements 2-3 years on the job (MIG & TIG) welding experience Experience using saws, welder machines, tools, etc. Knowledge of PPE (face shields, welder helmets, gloves, steel toes, curtains, etc) Must have a commitment to excellent quality standards. Must have a commitment to Safety. Must be able to read and speak English fluently. Must possess a helpful, friendly & positive attitude. High School diploma/ GED required Experience welding stainless steel a plus Welding Certification Program (AWS) a plus Other Details: Periodic lifting (up to 50lbs.) Sustained periods of standing Benefits Medical, Dental, Vision, Short/Long Term Disability, Life Insurance with buy-up option, 401K (after one year of employment), Sick Pay, PTO, Paid Holidays, Health Savings Account, Uniforms, and Employee Discounts. Kooks Custom Headers and Exhaust is proud to be an Equal Employment Opportunity and Affirmative Action employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, transgender status, national origin, protected veteran status, disability, age, pregnancy, genetic information, or any other consideration prohibited by law. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans. If you need assistance applying, please reach out to our HR Department

The position of Metal Fabricator is responsible for constructing structures and sign cabinets out of raw materials. Construction of structures and sign cabinets out of aluminum, steel or other materials according to create individual custom signage according to customer specifications, shop drawings and blueprints Build various sign types including channel letters, awnings, walls signs, pylon signs, etc Use various equipment to cut, bend, turn, mill and drill to specified lengths and widths per work order. Interpret data to select materials, layout reference points and sequence of operations. Operate metal fabricating machines (shears, saws, breaks, bending machines, and punch and forming presses.) Weld, rivet or bolt components together (primarily aluminum.) Inspect parts for defects. Prep parts or move to other areas as appropriate. Review daily schedule requirements to determine priorities. Operates machinery and equipment including routers, welders, saws, air drills and power tools Interpret blueprint and sketches To become a part of our team we require applicants for our Metal Fabricator position to have the following qualifications: SKILLS Mechanical aptitude Basic mathematical skills, ability to read a tape measure Effective interpersonal, oral and written communications skills Ability to read blue prints and interpret sign/shop drawings and specifications Ability to multi-task and handle numerous projects simultaneously, time management EDUCATION High School diploma, GED or the equivalent of training, education and experience EXPERIENCE Two years of experience as Metal Fabricator, service or similar industry. Sign industry experience preferred Allen Industries offers all full-time employees competitive pay as well as an excellent benefit package including: medical, dental, vision, paid time off, paid holiday's, supplemental STD, LTD and Life insurance and 401K with company match. General Disclaimer: The duties listed above are intended only as illustrations of the various types of work that may be performed. Other duties may be assigned as needed by the Company. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change. Allen Industries is an Equal Employment Opportunity, Affirmative Action Employer. We consider applicants for all positions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital, disability or veteran status.

Discover your exciting role An entry-level position in a production environment with no prior experience required. In this area you'll form sheet metal into cylindrical and conical products and prep and fabricate stainless steel pipe and fittings for welding and coating. Explore your tasks and responsibilities Under close supervision you'll be introduced to a series of duties and responsibilities with increasing complexity to include, but are not limited to the following: * Set up work area, select and verify the materials for production, and meet daily production and quality demands in such specific areas as: Grinding; Rolling; Seam Welding; and Flanging. * Comply with health, safety (including OSHA), and environmental procedures, and ensures the cleanliness of the area. * Work in a team environment. * Continue to learn and expand one's own capacity within this job by increasing knowledge and skill base. * Perform various other assignments per lead person or supervisor direction. Show your expertise QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Entry-level position with training provided. Minimum high school diploma or equivalent. LANGUAGE SKILLS Ability to read and understand work instructions, technical documents (cut sheets), safety policies, company policies and procedures. Ability to complete written documentation. Ability to effectively communicate with co-workers and superiors. MATHEMATICAL SKILLS Ability to apply basic math skills including adding and subtracting whole numbers and fractions. Ability to accurately read a tape measure to 1/32". PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand and use both hands to finger, handle, or feel. The employee is occasionally required to walk and reach with hands and arms. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderately loud and hearing and eye protection are mandatory. Non-Solicitation We are not currently accepting third-party agency candidates for this position. Any agency candidate submitted to any employee of Exyte or TFS may be contacted by Exyte or TFS without obligation to the third-party agency. Employment Sponsorship Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor employment visas at this time. EEO Statement Exyte US, Inc. and its subsidiaries are proud to be an Equal Employment Opportunity employer that is committed to supporting an inclusive workplace where associates excel based on personal merit, qualifications, experience, ability, and job performance. We prohibit discrimination and harassment of any kind based on race, color, religion, age, sex (e.g., pregnancy, childbirth and related medical conditions, sexual orientation, gender identity), national origin, disability, genetic information, protected veteran status, or any other protected characteristic as outlined by applicable federal, state, or local laws. Contact: You want to be part of the Exyte team? We look forward to receiving your application! For further questions and information, please do not hesitate to contact via E-Mail at ********************** Please note that we only consider applications submitted through our application portal. Applications sent via email will not be considered due to data protection regulations.

AC Corp is a Crete United company. As part of this nationwide network, we join an emerging leader in energy efficiency who is focused on making the places where we work, live, and play healthier. Together, we offer customers a multi-service solution to address needs across HVAC, plumbing, electrical, network cabling, security, access control, and building automation. Trust Crete United and AC Corp to make every community better and built-environment more sustainable. If you want a career with an organization that prioritizes the physical and mental health of its people and their communities - a single source sustainability powerhouse, look no further. AC Corporation seeks a manufacturer/welder for our Greensboro fabrication shop to cut, grind, weld and drill material.Job description AC Corporation seeks a manufacturer/welder for our Greensboro fabrication shop to cut, grind, weld and drill material. Qualifications: Must have ability to weld to a qualified procedure using SMAW (STICK), GTAW (TIG) and MIG Ability to weld aluminum, stainless steel and carbon steel - heavy gauge (16 to ½ inch) Ability to read and understand blueprints Able to use hand tools (measuring tape, level and channel lock) Physical Requirement: Able to work 10 hour days and weekends Stand, walk and climb stairs up to 12 hours per day Stoop, bend, turn, twist and reach repeatedly throughout day Lift and carry up to 50 lbs up and down ladders repeatedly Able to work in cold and hot environments Benefits: Company provided tools Medical, dental, and vision insurance benefits 401K plan Vacation and sick leave Job Type: Full-time Salary: $18.00 - $21.00 per hour Benefits: 401(k) Dental insurance Health insurance Life insurance Paid time off Vision insurance Schedule: 8 hour shift Monday to Friday Experience: Welding: 4 years (Required) License/Certification: Driver's License (Required)

Watch this video to learn more about Pureflow! NC WELDER About Our Organization: With over 38 years of experience providing high purity water solutions, Pureflow is committed to serving clients by designing, building, installing and maintaining water purification systems in a broad range of commercial and industrial markets. We understand that a successful business needs quality employees. We are seeking highly talented and motivated candidates to join our company where people, integrity, and excellence are essential to our culture. About the Position: We are seeking a Welder whose job responsibilities include, but are not limited to, the following for water purification and treatment systems and equipment: Job Responsibilities: * Join, fabricate, and repair metal and other weldable material by applying appropriate welding techniques * Interpret blueprints, specifications, diagrams, or schematics to determine appropriate welding process * May position pieces to be welded into jigs, holding fixtures, or guides using measuring instruments and hand tools * Operate welding equipment, regulates current and voltage or gas and wire flow rates for proper penetration and fusion of materials * Obtain maximum weld strength, avoiding distortion and excessive weld at joints * Inspect completed welds to determine structural soundness * May assist Installation Department staff in installing new, central water systems at customer sites * Maintain extraordinarily neat work areas, including shop, work sites, and vehicles, as applicable Qualifications: * 2 or more years welding experience (steel fabrication & pipe welding) * Familiar with commonly-used welding concepts, practices, and procedures * High school diploma or GED * Welding Certification preferred * Strong mechanical aptitude * Self-motivated, results-oriented, organized, energetic, and capable of staying cool under pressure from multiple ongoing projects Working Conditions: * Majority of work performed in industrial shop setting * Occasional work performed in industrial customer facilities * Travel possible, with 3 overnight stays per month on average * Ability to lift up to 100 lbs. Disclaimer: May perform other duties, as assigned Reports to: Installation/Fabrication Manager Benefits: * Competitive base salary * Comprehensive Benefits: Medical, Dental, Vision, Life Insurance, Health Savings Account (with company contributions), and more * $1 for $1 401k match up to 4% * 9 Company-paid holidays * Generous personal time off that increases with tenure * Education assistance * Employee referral bonus program * Ongoing training and development by internal and external industry experts Pureflow is an equal-opportunity employer and requires post-offer, pre-employment drug tests and background checks on all positions.

This position is responsible for any fabrication necessary and on time production of parts. This position includes GMAW, MIG welding, grinding panels, fitting pipes and tightening them, cutting different materials on different machines and processes, and maintaining the upkeep as necessary on welding equipment. The focus of this position is producing quality fabricated to spec steel parts in a timely and satisfactory manner. Minimum Qualifications: (Education, Experience, Knowledge, and Skills): + Minimum 3 years of welding experience for level II. + Must be able to read, comprehend, and apply a WPS. + Capable of passing a steel plate GMAW fillet visual test in the 2F position, 1G GMAW test. + Must be able to set up oxyfuel and plasma torch as well as be able to make clean square cuts, straight cuts, beveled cuts, and wash welds. + Follow and advise on all safety procedures. + Advanced ability to comprehend and interpret sketches / blueprints. + Skilled in the safe and correct use of all hand tools. + Certified in the use of all overhead cranes and fork trucks. + Accurately read a tape measure and other measuring devices such as pressure gauges, fillet weld gauges, and levels. + Must have track record of consistent and timely attendance. + Ability to cooperate with a team and take directions from supervisors as well as other peers and level III welders. + Capable of operating the band saw, ironworkers, bench grinder, and port-a-band. + Must be competent enough to determine if their own work is complete and correct as specified by instructions, drawings and specifications. + Work independently or cooperatively with little hands-on instructions. + Must have a solid understanding of weld joints and weld symbols. + Ability to interpret blueprints / engineering sketches and correctly assemble them. + Must be able to perform routine machine maintenance and trouble shoot issues. + Ability to operate welder and replace gas cylinder or other parts. + Ability to use hand and power tools. Job Duties and Responsibilities: + The main function of this role is the welding and grinding of skids, tanks, SCR stands, and cable trays. The welder will reference engineering documents to guide them in the building of structures and the fabrication of parts. + Additional responsibilities and objectives will be added as needed based on business and area of needs. Physical Demands and Work Environment: + Must be able to lift 50lbs, manipulate heavy test equipment, and cables. + Manual dexterity to operate digital equipment, including computers and PLC's, protective relays, controllers, and other such equipment with small fine buttons and operators. + Required to stand and walk for extended periods of time on the manufacturing floor throughout the day. + The work environment associated with this role can take place either indoors or outdoors depending on the nature of the project. Tolerance for various weather elements may be necessary. This is an active manufacturing setting; at times it will be noisy, and equipment will be moving. "The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this position. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required. Management reserves the right to assign or reassign duties and responsibilities at any time, based on business needs." About Us PowerSecure, a Southern Company subsidiary, is a leading provider of innovative energy solutions to electric utilities and their industrial, institutional, and commercial customers. Join Our Power Team! (https://cloud.3dissue.com/***********37/242401/HR-9-14-2020/index.html) We invest in high-value and cost-effective benefits for our employees. Our benefits package includes: + Medical, dental, vision and life insurance coverage + Competitive pay and a matching 401 (k) plan + Vacation, Company Holidays, Paid Time Off (PTO- personal and sick days) + Flexible spending accounts/Health savings account + Wellness Incentive Programs + Employee Referral Program + Tuition Reimbursement PowerSecure is an equal opportunity employer where an applicant's qualifications are considered without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other basis prohibited by law. This position is not open to third party recruiters. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.Operating Company: PowerSecure

AC Corp is a Crete United company. As part of this nationwide network, we join an emerging leader in energy efficiency who is focused on making the places where we work, live, and play healthier. Together, we offer customers a multi-service solution to address needs across HVAC, plumbing, electrical, network cabling, security, access control, and building automation. Trust Crete United and AC Corp to make every community better and built-environment more sustainable. If you want a career with an organization that prioritizes the physical and mental health of its people and their communities - a single source sustainability powerhouse, look no further. AC Corporation seeks a manufacturer/welder for our Greensboro fabrication shop to cut, grind, weld and drill material.Job description AC Corporation seeks a manufacturer/welder for our Greensboro fabrication shop to cut, grind, weld and drill material. Qualifications: Must have ability to weld to a qualified procedure using SMAW (STICK), GTAW (TIG) and MIG Ability to weld aluminum, stainless steel and carbon steel - heavy gauge (16 to ½ inch) Ability to read and understand blueprints Able to use hand tools (measuring tape, level and channel lock) Physical Requirement: Able to work 10 hour days and weekends Stand, walk and climb stairs up to 12 hours per day Stoop, bend, turn, twist and reach repeatedly throughout day Lift and carry up to 50 lbs up and down ladders repeatedly Able to work in cold and hot environments Benefits: Company provided tools Medical, dental, and vision insurance benefits 401K plan Vacation and sick leave Job Type: Full-time Salary: $18.00 - $21.00 per hour Benefits: 401(k) Dental insurance Health insurance Life insurance Paid time off Vision insurance Schedule: 8 hour shift Monday to Friday Experience: Welding: 4 years (Required) License/Certification: Driver's License (Required)

AC Corp is a Crete United company. As part of this nationwide network, we join an emerging leader in energy efficiency who is focused on making the places where we work, live, and play healthier. Together, we offer customers a multi-service solution to address needs across HVAC, plumbing, electrical, network cabling, security, access control, and building automation. Trust Crete United and AC Corp to make every community better and built-environment more sustainable. If you want a career with an organization that prioritizes the physical and mental health of its people and their communities - a single source sustainability powerhouse, look no further. AC Corporation seeks a manufacturer/welder for our Greensboro fabrication shop to cut, grind, weld and drill material.Job description AC Corporation seeks a manufacturer/welder for our Greensboro fabrication shop to cut, grind, weld and drill material. Qualifications: Must have ability to weld to a qualified procedure using SMAW (STICK), GTAW (TIG) and MIG Ability to weld aluminum, stainless steel and carbon steel - heavy gauge (16 to ½ inch) Ability to read and understand blueprints Able to use hand tools (measuring tape, level and channel lock) Physical Requirement: Able to work 10 hour days and weekends Stand, walk and climb stairs up to 12 hours per day Stoop, bend, turn, twist and reach repeatedly throughout day Lift and carry up to 50 lbs up and down ladders repeatedly Able to work in cold and hot environments Benefits: Company provided tools Medical, dental, and vision insurance benefits 401K plan Vacation and sick leave Job Type: Full-time Salary: $18.00 - $21.00 per hour Benefits: 401(k) Dental insurance Health insurance Life insurance Paid time off Vision insurance Schedule: 8 hour shift Monday to Friday Experience: Welding: 4 years (Required) License/Certification: Driver's License (Required)

Discover your exciting role The primary responsibilities of this position include preparing products for welding and finishing products after welding in a manner that ensures the proper and safe production of our high quality line of PSP products. Explore your tasks and responsibilities * Set up the work area, keep the area tidy, and meet the daily production and quality demands of the Weld Shop. * Prepare products to be welded through various support related tasks including preparing equipment, preparing products for purge welding and lifting, and holding and positioning parts. * Perform some light welding tasks with the GTAW process. * Comply with health, safety, (including OSHA), and environmental procedures, and ensure the cleanliness of the area. * Comply with established production philosophies designed to increase production, safety and/or quality, e.g., Lean Manufacturing, 5s and TWI methodologies. * Continue to learn and expand one's capacity within this job by increasing knowledge and skill base * Perform various other assignments per the Department Lead's direction. Show your expertise Minimum Education, Certifications, and Qualifications * High school diploma or GED require * Preferably a minimum 1 year of experience performing GTAW or GMAW welding Personal Attributes * Independent * Dependable; determined, positive in demeanor * Attention to detail * Team player * Good attitude Physical Demands * Frequent standing, bending, sitting, and use of hands is required * Specific vision abilities required to include close vision, and ability to adjust focus * Occasionally perform physical activities including lifting (up to 50 lbs. unassisted) Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the production area is usually moderately loud. The Weld Department is a sectioned off area of the production floor. Various grinding, cutting and welding tasks are performed within the Weld Department. * Safety glasses and hearing protection are required when in the production area * PPE covering eyes and skin is required when welding or heat induced cutting * PPE covering hands and face is required when grinding * PPE specific to tasks being performed is required Non-Solicitation We are not currently accepting third-party agency candidates for this position. Any agency candidate submitted to any employee of Exyte or TFS may be contacted by Exyte or TFS without obligation to the third-party agency. Employment Sponsorship Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor employment visas at this time. EEO Statement Exyte US, Inc. and its subsidiaries are proud to be an Equal Employment Opportunity employer that is committed to supporting an inclusive workplace where associates excel based on personal merit, qualifications, experience, ability, and job performance. We prohibit discrimination and harassment of any kind based on race, color, religion, age, sex (e.g., pregnancy, childbirth and related medical conditions, sexual orientation, gender identity), national origin, disability, genetic information, protected veteran status, or any other protected characteristic as outlined by applicable federal, state, or local laws. Contact: You want to be part of the Exyte team? We look forward to receiving your application! For further questions and information, please do not hesitate to contact Clinton Crellin via E-Mail at ************************* Please note that we only consider applications submitted through our application portal. Applications sent via email will not be considered due to data protection regulations.