Apprentice Electrician jobs at Faith Technologies, Inc. - 324 jobs

: PTC is a growing, fast-paced, mechanically advanced organization that provides value added solutions to world-wide users of mechanical tubing. This is not "an old steel pipe" business. PTC is a fact-based, solutions-oriented company that is growing each day. PTC is a manufacturer of welded steel & alloy tubing and chrome-plated bar. PTC has eight plants in PA, OH, IN, IL and MO; and its products are used globally, in products made by its customers such as Caterpillar, John Deere, Jeep, and Honda. Job Summary: Responsible for assisting and supporting quality initiatives at the Chicago Heights facility. Essential Duties and Responsibilities: Inspect, repair, replace, install, adjust and maintain all electrical and electronic equipment in a steel mill environment. Experience and Capable of working with 230/460/600 volt AC & 250 DC mill controls and overhead cranes. Ability to read, analyze, interpret and perform work from schematics, technical specifications, drawings and sketches. Experience with PLC systems and variable frequency drives (VFD) a plus. Shift work, weekends, call-outs and overtime a must. Perform any and all other duties as directed by supervisor or management representative within safety guidelines. Performs work in accordance with the defined Quality system and share responsibility for Quality. The incumbent is expected to understand that all employees have a shared responsibility for the quality of products and related services provided to our customers. Duties and responsibilities are to be carried out in accordance with the PTC Quality Management System and its policies, procedures, and work instructions as applicable to the job or function being performed. Education and/or Experience: High school diploma or general education degree (GED). Completion of electrician course, Associate Degree, or equivalent experience is required. At least 3- 5 years of hands-on commercial or industrial electrical experience. Skills and Abilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Skills Required: Ability to troubleshoot controls and electrical systems with amp meters, voltmeters, tracers, and recording devices. Complete daily work orders as assigned and update team with daily work reports outlining progress and new issues. Certificates, Licenses, Registrations: Must possess a valid driver's license for business travel, such as, customer visits, to attend required meetings, seminars, etc. Certificates, Licenses, and Registrations: Must possess a valid driver's license for business travel, such as, customer visits, to attend required meeting, seminars, etc. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to risk of electrical shock. The employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions, fumes or airborne particles, toxic or caustic chemicals, and extreme heat. The noise level in the work environment is usually moderate. Frequently enters and works in manufacturing of Plant where noise level is high. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; twist; bend; use hands to finger, handle, or feel; and talk or hear. The employee is occasionally required to climb or balance; stoop, kneel, crouch, or crawl; and smell. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

: PTC is a growing, fast-paced, mechanically advanced organization that provides value added solutions to world-wide users of mechanical tubing. This is not "an old steel pipe" business. PTC is a fact-based, solutions-oriented company that is growing each day. PTC is a manufacturer of welded steel & alloy tubing and chrome-plated bar. PTC has eight plants in PA, OH, IN, IL and MO; and its products are used globally, in products made by its customers such as Caterpillar, John Deere, Jeep, and Honda. Job Summary: Responsible for assisting and supporting quality initiatives at the Chicago Heights facility. Essential Duties and Responsibilities: Inspect, repair, replace, install, adjust and maintain all electrical and electronic equipment in a steel mill environment. Experience and Capable of working with 230/460/600 volt AC & 250 DC mill controls and overhead cranes. Ability to read, analyze, interpret and perform work from schematics, technical specifications, drawings and sketches. Experience with PLC systems and variable frequency drives (VFD) a plus. Shift work, weekends, call-outs and overtime a must. Perform any and all other duties as directed by supervisor or management representative within safety guidelines. Performs work in accordance with the defined Quality system and share responsibility for Quality. The incumbent is expected to understand that all employees have a shared responsibility for the quality of products and related services provided to our customers. Duties and responsibilities are to be carried out in accordance with the PTC Quality Management System and its policies, procedures, and work instructions as applicable to the job or function being performed. Education and/or Experience: High school diploma or general education degree (GED). Completion of electrician course, Associate Degree, or equivalent experience is required. At least 3- 5 years of hands-on commercial or industrial electrical experience. Skills and Abilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Skills Required: Ability to troubleshoot controls and electrical systems with amp meters, voltmeters, tracers, and recording devices. Complete daily work orders as assigned and update team with daily work reports outlining progress and new issues. Certificates, Licenses, Registrations: Must possess a valid driver's license for business travel, such as, customer visits, to attend required meetings, seminars, etc. Certificates, Licenses, and Registrations: Must possess a valid driver's license for business travel, such as, customer visits, to attend required meeting, seminars, etc. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to risk of electrical shock. The employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions, fumes or airborne particles, toxic or caustic chemicals, and extreme heat. The noise level in the work environment is usually moderate. Frequently enters and works in manufacturing of Plant where noise level is high. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; twist; bend; use hands to finger, handle, or feel; and talk or hear. The employee is occasionally required to climb or balance; stoop, kneel, crouch, or crawl; and smell. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

Journeyman Electrician - TS/SCI Job Category: Engineering and Technical Support Time Type: Full time Minimum Clearance Required to Start: TS/SCI with Polygraph Employee Type: Regular-Long Term Assignment Percentage of Travel Required: Up to 10% Type of Travel: Local * * * The Opportunity: CACI is looking for an experienced Journeyman Electrician in support to our mission critical program in South Korea. The Responsibilities: Provide 24-hour 7-day quick reaction technical support for critical military communications installs and maintain low-voltage (480/277, 600 volts) and below (50/60 HZ) single and multi-phase power wiring. Install feeder and branch circuits including conduit, service wire, fuse and breaker panels, switches, outlets, junction and outlet boxes, lighting fixtures, splices, connectors, and ground wiring for red and black installations Use customer quality assurance procedures to ensure material used and workmanship meet the requirements of applicable customer specification, criteria, procedures and technical /safety standards Respond to service calls and preventive maintenance inspections orally or in writing through computerized maintenance management system (CMMS) regarding malfunctioning/inoperable equipment Provide technical assistance and support in electrical maintenance, repair, installation, troubleshooting and hands-on repairs Support US Army systems on site whenever and wherever deployed Available to deploy to other countries and/or theaters to perform quick reaction technical support to US forces worldwide military contingency missions and requirements in potentially hazardous work environments Manage and participate in installing power and grounding for complex communication equipment, ensuring proper electrical connection and grounding The Qualifications: Vocational or High School diploma or equivalent and 4 years' experience leading to licensure as a Journeyman Electrician or equivalent license at a State level; or six years' experience in an equivalent Military Electrician training/certification Subject matter expertise level capability of measuring electrical properties such as resistance, inductance, capacitance, electrical potential and current flow Subject matter expertise level familiarity with provisions and applications of the National Electric Code and ability to select and install domestic and foreign materials and devices under the NEC Fluent in English including ability to read, write and comprehend technical documentation, schematics and diagrams written under the ANSI standards Liaison with local deployed and CONUS engineering departments to maintain immediate response to critical requirements resulting from analysis of current specification data on assigned systems Able to maneuver in small spaces and lift up to 50lbs Able to perform all duties to ensure timely, courteous and quality support to INSCOM or other customers US Citizen TS/SCI with ability to obtain and retain a Poly is required What You Can Expect: A culture of integrity. At CACI, we place character and innovation at the center of everything we do. As a valued team member, you'll be part of a high-performing group dedicated to our customer's missions and driven by a higher purpose - to ensure the safety of our nation. An environment of trust. CACI values the unique contributions that every employee brings to our company and our customers - every day. You'll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality. A focus on continuous growth. Together, we will advance our nation's most critical missions, build on our lengthy track record of business success, and find opportunities to break new ground - in your career and in our legacy. Your potential is limitless. So is ours. Learn more about CACI here. Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. Learn more here. The proposed salary range for this position is: $51,800-$106,200 CACI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.

Installation and repair of electrical systems, apparatus, and electrical and electronic components of industrial machinery and equipment, following electrical code, manuals, schematic diagrams, blueprints, and other specifications, using hand tools, power tools, and electrical and electronic test equipment. The employee is normally engaged in the wiring and development of special machines. Essential Functions Installs power supply wiring and conduit for newly installed machines and equipment, such as robots, conveyors, and programmable controllers, following electrical code and blueprints, using hand tools and voltage/current testing devices. Connects power supply wires to machines and equipment, and connects cables and wires between machines and equipment, following manuals, schematic diagrams, and blueprints, using hand tools and test equipment Diagnoses malfunctioning apparatus, such as transformers, motors, and lighting fixtures, using test equipment, and replace damaged or broken wires and cables, using hand tools. Replaces faulty electrical components of the machine, such as relays, switches, and motors, and positions sensing devices, using hand tools. Diagnoses and repairs or replace faulty electronic components, such as printed circuit boards, using electronic test equipment and hand tools. May direct and train individuals from the same and other classifications. Effectively interacts with managers, supervisors, and hourly team members across all departments. Must be willing to travel domestically and internationally for equipment or machine installation, maintenance, and troubleshooting development problems. Must be willing to participate in specialized training as assigned by supervisory personnel. Additional duties as needed and assigned. Requirements Required: Proficiency in shop mathematics including algebraic, geometric, and trigonometric functions. Ability to solve electrical problems using Ohm's and power laws, and similar electrical/electronic equations. Proficiency in determining/calculating required wire size and insulation for a specific application, including all pertinent de-rating criteria. Expertise in the use of normal electrical/electronic testing and diagnostic equipment, including devices such as digital Volt-Ohm Meter (VOM), current sensors and probes, and oscilloscope. Competence in the use of hand and power conduit benders and other tools used for fabricating electrical conduit systems and wireways. Knowledge of basic machine motion components and assembly techniques. Expertise in DC circuits, single and three-phase AC power, and distribution circuits. Proficiency in reading and interpreting electrical blueprints, schematics, and wire and wiring diagrams and specifications. Knowledge of National Electrical Code (NEC) and JIC Electrical Codes as used in the Special Machine Industry, particularly JIC EMP-1-67 and EGP-1-67. Must have a minimum of four (4) years of experience in industrial wiring and electrical technician operations or a combination of technical school training plus experience or ability to demonstrate equivalent skill and ability. Training to include the equivalent of one (1) semester technical course in PLC operation and programming or equivalent experience in PLC operations. Required to hold electrician's license or similar certification. Preferred: Technical school experience in industrial technology, electrical technology, electrical circuitry and systems, National Electrical Code, and industrial controller installation and programming is helpful. Benefits: 401(k) 401(k) matching Paid Holidays Employer paid Life Insurance Employer paid Short Term Disability Employer paid Long Term Disability Dental insurance Employee assistance program Flexible spending account Health insurance Health Savings Account with an employer match Paid time off Referral Program Tuition reimbursement Vision insurance Voluntary Life insurance Schedule: 1st Shift Day Shift Monday to Friday Salary Description $31,200.00 - $74,00.00

Installation and repair of electrical systems, apparatus, and electrical and electronic components of industrial machinery and equipment, following electrical code, manuals, schematic diagrams, blueprints, and other specifications, using hand tools, power tools, and electrical and electronic test equipment. The employee is normally engaged in the wiring and development of special machines. Essential Functions Installs power supply wiring and conduit for newly installed machines and equipment, such as robots, conveyors, and programmable controllers, following electrical code and blueprints, using hand tools and voltage/current testing devices. Connects power supply wires to machines and equipment, and connects cables and wires between machines and equipment, following manuals, schematic diagrams, and blueprints, using hand tools and test equipment Diagnoses malfunctioning apparatus, such as transformers, motors, and lighting fixtures, using test equipment, and replace damaged or broken wires and cables, using hand tools. Replaces faulty electrical components of the machine, such as relays, switches, and motors, and positions sensing devices, using hand tools. Diagnoses and repairs or replace faulty electronic components, such as printed circuit boards, using electronic test equipment and hand tools. May direct and train individuals from the same and other classifications. Effectively interacts with managers, supervisors, and hourly team members across all departments. Must be willing to travel domestically and internationally for equipment or machine installation, maintenance, and troubleshooting development problems. Must be willing to participate in specialized training as assigned by supervisory personnel. Additional duties as needed and assigned. Requirements Required: Proficiency in shop mathematics including algebraic, geometric, and trigonometric functions. Ability to solve electrical problems using Ohm's and power laws, and similar electrical/electronic equations. Proficiency in determining/calculating required wire size and insulation for a specific application, including all pertinent de-rating criteria. Expertise in the use of normal electrical/electronic testing and diagnostic equipment, including devices such as digital Volt-Ohm Meter (VOM), current sensors and probes, and oscilloscope. Competence in the use of hand and power conduit benders and other tools used for fabricating electrical conduit systems and wireways. Knowledge of basic machine motion components and assembly techniques. Expertise in DC circuits, single and three-phase AC power, and distribution circuits. Proficiency in reading and interpreting electrical blueprints, schematics, and wire and wiring diagrams and specifications. Knowledge of National Electrical Code (NEC) and JIC Electrical Codes as used in the Special Machine Industry, particularly JIC EMP-1-67 and EGP-1-67. Must have a minimum of four (4) years of experience in industrial wiring and electrical technician operations or a combination of technical school training plus experience or ability to demonstrate equivalent skill and ability. Training to include the equivalent of one (1) semester technical course in PLC operation and programming or equivalent experience in PLC operations. Required to hold electrician's license or similar certification. Preferred: Technical school experience in industrial technology, electrical technology, electrical circuitry and systems, National Electrical Code, and industrial controller installation and programming is helpful. Benefits: 401(k) 401(k) matching Paid Holidays Employer paid Life Insurance Employer paid Short Term Disability Employer paid Long Term Disability Dental insurance Employee assistance program Flexible spending account Health insurance Health Savings Account with an employer match Paid time off Referral Program Tuition reimbursement Vision insurance Voluntary Life insurance Schedule: 1st Shift Day Shift Monday to Friday Salary Description $31,200.00 - $74,00.00

Job Category: Engineering and Technical Support Time Type: Full time Minimum Clearance Required to Start: TS/SCI with Polygraph Employee Type: Regular-Long Term Assignment Percentage of Travel Required: Up to 10% Type of Travel: Local * * * The Opportunity: CACI is looking for an experienced Journeyman Electrician in support to our mission critical program in South Korea. The Responsibilities: Provide 24-hour 7-day quick reaction technical support for critical military communications installs and maintain low-voltage (480/277, 600 volts) and below (50/60 HZ) single and multi-phase power wiring. Install feeder and branch circuits including conduit, service wire, fuse and breaker panels, switches, outlets, junction and outlet boxes, lighting fixtures, splices, connectors, and ground wiring for red and black installations Use customer quality assurance procedures to ensure material used and workmanship meet the requirements of applicable customer specification, criteria, procedures and technical /safety standards Respond to service calls and preventive maintenance inspections orally or in writing through computerized maintenance management system (CMMS) regarding malfunctioning/inoperable equipment Provide technical assistance and support in electrical maintenance, repair, installation, troubleshooting and hands-on repairs Support US Army systems on site whenever and wherever deployed Available to deploy to other countries and/or theaters to perform quick reaction technical support to US forces worldwide military contingency missions and requirements in potentially hazardous work environments Manage and participate in installing power and grounding for complex communication equipment, ensuring proper electrical connection and grounding The Qualifications: Vocational or High School diploma or equivalent and 4 years' experience leading to licensure as a Journeyman Electrician or equivalent license at a State level; or six years' experience in an equivalent Military Electrician training/certification Subject matter expertise level capability of measuring electrical properties such as resistance, inductance, capacitance, electrical potential and current flow Subject matter expertise level familiarity with provisions and applications of the National Electric Code and ability to select and install domestic and foreign materials and devices under the NEC Fluent in English including ability to read, write and comprehend technical documentation, schematics and diagrams written under the ANSI standards Liaison with local deployed and CONUS engineering departments to maintain immediate response to critical requirements resulting from analysis of current specification data on assigned systems Able to maneuver in small spaces and lift up to 50lbs Able to perform all duties to ensure timely, courteous and quality support to INSCOM or other customers US Citizen TS/SCI with ability to obtain and retain a Poly is required What You Can Expect: A culture of integrity. At CACI, we place character and innovation at the center of everything we do. As a valued team member, you'll be part of a high-performing group dedicated to our customer's missions and driven by a higher purpose - to ensure the safety of our nation. An environment of trust. CACI values the unique contributions that every employee brings to our company and our customers - every day. You'll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality. A focus on continuous growth. Together, we will advance our nation's most critical missions, build on our lengthy track record of business success, and find opportunities to break new ground - in your career and in our legacy. Your potential is limitless. So is ours. Learn more about CACI here. Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. Learn more here. The proposed salary range for this position is: $51,800-$106,200 CACI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.

The company built on breakthroughs. Join us. Corning is one of the world's leading innovators in glass, ceramic, and materials science. From the depths of the ocean to the farthest reaches of space, our technologies push the boundaries of what's possible. How do we do this? With our people. They break through limitations and expectations - not once in a career, but every day. They help move our company, and the world, forward. At Corning, there are endless possibilities for making an impact. You can help connect the unconnected, drive the future of automobiles, transform at-home entertainment, and ensure the delivery of lifesaving medicines. And so much more. Come break through with us. Corning's businesses are ever evolving to best serve our customers, industries, and consumers. Today, we accelerate and transform life sciences, mobile consumer electronics, optical communications, display, and automotive markets. We are changing the world with: Trusted products that accelerate drug discovery, development, and delivery to save lives Damage-resistant cover glass to enhance the devices that keep us connected Optical fiber, wireless technologies, and connectivity solutions to carry information and ideas at the speed of light Precision glass for advanced displays to deliver richer experiences Auto glass and ceramics to drive cleaner, safer, and smarter transportation Industrial Electrician Description Job Summary: An industrial electrician installs, maintains and repairs industrial electrical and mechanical equipment. This equipment may include fixtures, wiring, pumps, heavy-duty machinery and electrical systems. These professionals most commonly work in commercial or industrial buildings but can also work in other settings. Industrial electricians frequently work in the maintenance and construction industries. Duties and responsibilities: Install, maintain, and repair electrical systems and equipment in accordance with the National Electrical Code (NEC) Read and interpret blueprints, schematics, and wiring diagrams Troubleshoot electrical issues and perform necessary repairs Perform preventive maintenance on electrical systems to ensure optimal performance Collaborate with other team members to complete projects on time and within budget Renovate and build electrical systems as needed Install and program logic controllers for automated equipment Programming logic controllers for automation Oversee the maintenance of power supply and distribution (high and low voltage systems, distribution systems, and ancillary equipment within the department's jurisdiction Adhere to all JA Solar and OSHA rules and regulations at all times and wear proper safety equipment while on plant grounds Meet or exceed company safety standards Perform other job responsibilities as assigned by management Qualifications: 4 years of Industrial electricians experience with frequent work in the maintenance and construction industries. Bachelor's degree preferred Knowledge, Skills, and Abilities: Knowledgeable in pertinent electrical codes and regulations Able to understand schematics and other technical documents Must be able to handle physically-demanding tasks Proven experience as an Industrial Electrician or similar role - In-depth knowledge of electrical systems and components Proficiency in reading blueprints, schematics, and wiring diagrams Strong troubleshooting skills Familiarity with low voltage systems Ability to work independently and as part of a team Excellent attention to detail and problem-solving abilities Electrical system installation, maintenance, and repair Blueprint reading and interpretation Troubleshooting electrical issues Renovation and construction of electrical systems Knowledge of the National Electrical Code (NEC) Working conditions: Able to work extended hours as needed Continuous exposure to extreme heat, extreme cold, and extreme noise Must wear protective equipment while at the location Familiarity with hand tools and specialized equipment May be required to work after hours and on weekends or holidays Physical requirements: Requires prolonged standing, walking, sitting, lifting, pushing, pulling, and climbing to a significant degree Heavy Work-Exerting up to 50 pounds of force occasionally, and/or up to 20pounds or force frequently, and/or up to 10 pounds of force constantly to move objects While performing the duties of this job, the employee is regularly required to talk and hear, in order to communicate to employees/visitors as well as function safely around equipment Must be able to perform all job functions which include, but may not be limited to, pushing, turning, and/or pulling of controls EEO/AA Statement JA Solar is an EEO/AA (equal opportunity/affirmative action) institution and does not discriminate on the basis of sex, age, race, color, religion, physical or mental disability, creed, national origin, veteran status, sexual orientation, genetic information, gender identity, or gender expression in the programs or activities which it operates. Qualifications Skills Required Detail Oriented Intermediate Education Required High School or better. Preferred Bachelors or better in Electrical Engineering or related field. Experience Required Training or certification in relevant Electrician skill 3 years: At least 3 years of Industrial Electrician experience This position does not support immigration sponsorship. The range for this position is $35.00 hourly rate - $37.50 hourly rate. Starting pay for the successful applicant is dependent on a variety of job-related factors, including but not limited to geographic location, market demands, experience, training, and education. A job that shapes a life. Corning offers you the total package. Your well-being is our priority. Our compensation and benefits package supports your health and wellness, financial aspirations, and career from day one. Company-wide bonuses and long-term incentives align with key business results and ensure you are rewarded when the company performs well. When Corning wins, we all win. As part of our commitment to your financial well-being, we provide a 100% company-paid pension benefit with fixed contributions that grow throughout your career. Combined with matching contributions to your 401(k) savings plan, Corning's total contributions to your retirement accounts can reach between 7% and 12% of your pay, depending on your age and years of service. Our health and well-being benefits include medical, dental, vision, paid parental leave, family building support, fitness, company-paid life insurance, disability, disease management programs, paid time off, and an Employee Assistance Program (EAP) to support you and your family. Getting paid for our work is important, but feeling appreciated and recognized for those contributions motivates us much more. That's why Corning offers a recognition program to celebrate successes and reward colleagues who make exceptional contributions. We prohibit discrimination on the basis of race, color, gender, age, religion, national origin, sexual orientation, gender identity or expression, disability, veteran status or any other legally protected status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. To request an accommodation, please contact us at [email protected].

At Trane Technologies we Challenge Possible. Our brands - including Trane and Thermo King - create access to cooling and comfort in buildings and homes, transport and protect food and perishables, connect customers to elevated performance with less environmental impact, dramatically reduce energy demands and carbon emissions, and innovate with a better world in mind. We boldly challenge what's possible for a sustainable world. Job Summary: Performs all types of electrical installation and repair service for the electrical utilities and machinery in the plant, participates in the maintenance, troubleshooting, replacement, repair, and testing of energized equipment and circuits Responsibilities: Installs electrical conduit systems, feeders, branch circuits, panel boards, transformers, disconnects, variable frequency drives, and other related electrical equipment and systems according to national and local electrical codes. Examines, installs, and maintains various electrical systems and makes recommendations for new equipment or improvements Completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. Ability to read and understand technical manuals, electrical drawings and prints. Working knowledge of electric systems, voltages, wiring diagrams and test instruments with various voltages 24v-13.2kv. Knowledge of other maintenance tasks, such as electrical preventative maintenance and repairs, lock-out/tagout, disconnecting and removing motors and VFD's, IO cards, PLCs, etc. Possible Certifications required Qualifications: Typically works alone and reports to maintenance supervisor Communicates to all departments regarding any implications for electrical maintenance work Communicates with a computer to manufacturers, suppliers or maintenance equipment, and external parties. Ability to use Microsoft Office Ability to provide applicable certifications or technical school degrees 5+ years of maintenance experience Demonstrated problem solving ability Advanced mathematical skills Ability to train others Experience with Salvagnini punching and forming equipment is a plus Key Competencies: We offer competitive compensation and comprehensive benefits and programs that help our employees thrive in both their professional and personal lives. We are proud of our winning culture which is inclusive and respectful at its core. We share passion for serving customers, caring for others, and boldly challenging what's possible for a sustainable world. We are committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identify, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally protected status.

Type of Requisition: Regular Clearance Level Must Currently Possess: None Clearance Level Must Be Able to Obtain: None Public Trust/Other Required: None Job Family: Field Service and Support Job Qualifications: Skills: Blueprints, Electronic Circuitry, Ohmmeters, Wiring Certifications: Electrician, Master - General License - General License Experience: 5 + years of related experience US Citizenship Required: No Job Description: Field Technician IV Under general supervision, install, maintain, and repair backup generator systems and associated electrical infrastructure at wireless communications facilities throughout the region. Ensure safe, code-compliant operation of all electrical systems supporting critical telecommunications equipment. Qualifications Required Certifications: Valid Master Electrician License Valid driver's license with clean driving record Technical Knowledge & Skills: Expert knowledge of generator installation, operation, and maintenance (industrial-grade systems) Proficiency with electrical circuits, three-phase power systems, and automatic transfer switches Strong understanding of National Electrical Code (NEC) and local electrical codes Ability to read and interpret electrical blueprints, one-line diagrams, and equipment schematics Skilled in troubleshooting electrical systems using diagnostic equipment Mathematical aptitude for load calculations and voltage drop analysis Proficient with hand tools, power tools, and specialized electrical testing equipment Must be able to obtain and hold multiple state electrical licenses Experience: Minimum 5 years of electrical field experience required Generator installation experience strongly preferred Telecommunications or critical infrastructure experience a plus Primary Responsibilities Generator Installation & Maintenance: Install industrial backup generators at wireless communications sites, including fuel systems, exhaust systems, and electrical connections Connect generators to automatic transfer switches and facility electrical distribution panels Commission new generator systems through startup, load testing, and integration with facility monitoring systems Perform scheduled preventive maintenance on generator systems per manufacturer specifications Diagnose and repair generator mechanical and electrical failures Electrical Systems Work: Install and repair electrical distribution systems, including circuit breaker panels, disconnect switches, and metering equipment Run power supply wiring, cables, and conduit for new equipment installations Install and connect electrical components including motors, relays, contactors, and control systems Test circuit continuity, voltage, amperage, and ground fault protection to ensure safe operation Measure, cut, bend, thread, and install electrical conduit using industry-standard tools and techniques Site Management & Documentation: Respond to work orders and emergency service calls at remote telecommunications facilities Conduct site inspections to identify electrical hazards and needed repairs Maintain accurate records of materials used, labor hours, and work performed Prepare time and material estimates for projects Ensure work areas are clean, organized, and secure upon job completion Maintain inventory of tools, equipment, and materials Safety & Compliance: Operate all equipment according to established safety procedures and OSHA regulations Work safely around energized electrical systems and telecommunications equipment Identify and correct unsafe conditions; report non-correctable hazards immediately Follow proper lifting, climbing, and confined space entry protocols Maintain tools and equipment in safe operating condition Collaboration: Coordinate with site managers, telecom engineers, and project supervisors Communicate effectively with customers and stakeholders Work independently with minimal supervision at remote locations Equipment Used Multimeter, megohmmeter, clamp meter, oscilloscope, and specialized testing equipment; soldering and termination tools; wire pulling equipment; pipe bender and threader; hand and power tools (saws, drills, impacts); trencher; concrete saw; extension ladders and scaffolding; company service truck or van. Working Conditions Physical Demands: Continuous walking, standing, climbing, stooping, bending, kneeling, and reaching. Frequent heavy lifting (up to 75 lbs) and carrying. Work in tiring and uncomfortable positions including overhead work, confined spaces, and around energized equipment. Environmental Factors: Work performed outdoors and indoors at remote telecommunications sites in all weather conditions. Exposure to extreme heat and cold, noise, dust, and vibration. Work at heights on ladders, rooftops, and tower structures. Frequent regional travel required, including overnight stays. Schedule: Standard business hours within rotation. Weekend work may be required. The likely hourly rate for this position is between $38.25 - $51.75. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range. Scheduled Weekly Hours: 40 Travel Required: 75-100% T elecommuting Options: Remote Work Location: USA TX Home Office (TXHOME) Additional Work Locations: Total Rewards at GDIT: Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most. We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology. Join our Talent Community to stay up to date on our career opportunities and events at gdit.com/tc . Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Industrial Electrician Expected Duration: Full Time Pay Range: $32/hr to $33.46/hr Shift Hours: Rotating 12-hour shifts Shift: Will train on 1st shift (M-Fr, 8am - 4pm) for approx. 3 months then go to shift. Will likely work rotating 12 hour shifts so candidate MUST be willing to work days and/or nights. This position will report directly to the Plant Engineer. We are looking for candidates with a strong work ethic, a stable work history, solid communication skills, pleasant attitude and a team player mentality. Candidates must be able to work either 8-hour or 12-hour shifts and must be flexible to work any shift, holidays and overtime as needed. What are the night shift hours? On the “continuous shift” the hours are 8pm to 8 am What does the rotating schedule look like? The continuous shift is 12 hours per day. Work Monday & Tuesday, off Wednesday & Thursday and then work Friday, Saturday and Sunday. Then they would be off on Monday & Tuesday, work Wednesday & Thursday. Then off on Friday, Saturday and Sunday. Then the schedule repeats. Part of Saturday is time and a half. Sunday is double time pay. Is there a shift differential? On the continuous shift, 8am to 8pm gets 45 cents per hour. 8pm to 8am gets $1.25 per hour While reporting to the Plant Engineering Supervisor, the Industrial Electrician installs, troubleshoots, and maintains production equipment and facility electrical equipment. What you'll be doing: Install all electrical segments in such equipment as gas mixers, burners, de-ionized water units, air compressors, plant air circulation systems, cooling and heating units, ultra sonic cleaners, waxers, and plant lighting. Troubleshoot, adjust and repairs all electrical equipment, solid state circuits, circuit boards, components, logic boards, transducers, amplifiers, and complex timing and inspection devices. Perform preventative maintenance on assigned electrical systems and equipment. Identify ineƯiciencies and potential electrical problems and coordinate through supervisor to resolve. Program logic controls (PLC) for proper equipment operation. May assist in the design, experimentation, and/or installation of all new plant equipment or electrical production procedures. Establish and maintain eƯective work relationships within the department, the division, the group, and the company. Includes ability to handle stress and to interact with others so as to establish and maintain a positive and productive work environment and minimize personal conflicts. Ability to communicate, write , read, comprehend, and follow complicated verbal and written instructions. Assure and maintain safe and healthful working conditions while enforcing safety rules and regulations. Must be able to work overtime if needed We'd love to hear from you if: You have broad training in a related field usually acquired through an associate's degree or through equivalent electronics work experience. You have 2+ years of job-related experience. You are experienced with PLC programming & troubleshooting, HMI, and industrial electrical networking. You have working knowledge of the following areas: all assigned equipment, multimeter, solid state circuitry, electronics, electrical-mechanical devices, transmission systems, interface units, AC/DC motors, high-voltage motors, wiring diagrams and schematics, Signode strapper, video jet, Allen Bradley and Siemen's PLC's, computers, and inspection and digital devices. You have knowledge of hazardous material handling, working in confined spaces and other safety practices, and basic knowledge of national electrical code (NEC). You have a thorough understanding of the operating principles of all assigned equipment, i.e., electrical test equipment, hand tools, etc. and the ability to use logic to troubleshoot equipment.

At BWX Technologies, Inc. (NYSE: BWXT), we are People Strong, Innovation Driven. A U.S.-based company, BWXT is a Fortune 1000 and Defense News Top 100 manufacturing and engineering innovator that provides safe and effective nuclear solutions for global security, clean energy, environmental restoration, nuclear medicine and space exploration. With more than 7,800 employees, BWXT has 14 major operating sites in the U.S., Canada and the U.K. We are the sole manufacturer of naval nuclear reactors for U.S. submarines and aircraft carriers. Our company supplies precision manufactured components, services and fuel for the commercial nuclear power industry across four continents. Our joint ventures provide environmental restoration and operations management at a dozen U.S. Department of Energy and NASA facilities. BWXT's technology is driving advances in medical radioisotope production in North America and microreactors for various defense and space applications. For more information, visit ************ . Follow us on LinkedIn , X , Facebook and Instagram . Welcome to BWXT We believe in empowering our employees and cultivating a dynamic workplace that fosters growth and collaboration. Whether you're an experienced professional or just starting your career, you'll find opportunities to challenge yourself, learn from seasoned experts, and contribute to nuclear innovation. We required a diverse range of skills to support our work in the markets that drive our business and welcome candidates from all backgrounds and life stages who are passionate about making a difference. Position Overview: The position involves safely repairing, constructing, and servicing electronic and electrical machinery and equipment. Responsibilities include diagnosing electrical issues, interpreting diagrams, planning workflows, and designing component adaptations. The electrician is also tasked with mechanical repairs, maintaining communication wiring and power distribution systems, and ensuring a clean work environment. Additional duties include reporting errors, maintaining performance records, and performing other assigned tasks as needed. Location: On-site in Mt. Vernon, IN Your Day to Day as an Electrician: Performs all work safely, working within established procedures and uses a questioning attitude to prevent and stop unsafe work conditions. Repairs, constructs, adjusts, modifies, installs and sets-up and services all types of electronic and electrical machinery and equipment throughout the works as required. Make sketches and layouts, performs diagnoses and corrects any and all electronic and electrical difficulties, including all specialized equipment. Works from wiring diagrams, drawings, specifications, and written and verbal instructions. Analyzes all types of circuits, wiring diagrams and drawings. Plans details of working procedure to determine material or replacement needs and selects the most logical approach to trouble shooting and repair problems. Designs and constructs adaptations or conversions of component parts. Assembles, installs, adjusts, repairs or replaces faulty parts or wiring and all types of electronic designs. Make mechanical and electrical repairs in connection with the servicing of electronic equipment. Hooks up and moves material, equipment and products to and from work area and building by hand or uses material handling equipment, including overhead cranes. Maintains, installs or repairs all communication cables or wiring. Maintains primary power distribution system, including power cable splices. Plans and performs work requiring a thorough knowledge of electrical and electronic principles, wiring specification codes, properties of various materials and principle of operation and application of equipment. Keeps own work area, machinery and equipment clean and orderly. Detects and reports faulty operations and defective materials. Reports print errors and/or errors in written and verbal instructions. Maintains performance and maintenance records of all equipment worked on or assigned duties. Perform other duties as assigned. Required Qualifications: A two-year technical certification, military training or equivalent training, along with two years of on-the-job experience. Must pass quality control testing, as required. Must be able to climb to any height. Must furnish adequate personal tools to properly perform required duties. Applicants selected for this position must comply with all safety and plant rules, regulations and practices and must attend training classes, as required. Must be a U.S. citizen with no dual citizenship. This position requires shift work, and successful applicants must be willing to work any shift. Preferred Qualifications: PLC Experience, Siemens based preferred Industrial electrician experience, such as conduit bending Substation switchgear experience What We Offer: Competitive salary and benefits package, including health, dental, and retirement plans. Flexible work schedules and paid time off to promote a healthy work-life balance. Professional development opportunities, including mentorship programs and sponsorship for continuing education. An inclusive atmosphere that celebrates new perspectives and supports collaboration between different generations. The chance to be part of a mission-driven organization making a positive impact on the future of energy. Opportunities for continuous learning and training to grow throughout your career! Pay: $74,665.11 - $74,665.11 The base salary range for this position in Indiana (US-IN) at the start of employment is expected to be between $74,665.11 and $74,665.11 per year. However, the base salary offered is based on local job market factors, and may vary further depending on factors specific to the selected job candidate, such as job-related knowledge, skills, experience, and other objective business considerations. Subject to these considerations, the total compensation package for this position may also include other elements, such as an annual cash incentive in addition to a full range of medical, retirement, and/or other benefits. Details of participation in these benefit plans will be provided at such time the selected job candidate receives an offer of employment. If hired, the selected job candidate will be employed 'at-will,' unless employed at a location and in a position subject to a collective bargaining agreement. The company further reserves the right to modify base salary (as well as any other discretionary payment, compensation or benefit program) at any time, including for reasons related to individual performance, company or individual department/team performance, and other market factors. As a federal government contractor, BWX Technologies, Inc. and any subsidiaries, affiliates and related entities ("BWXT" or the "Company") complies with all federal, state, and local laws and customer requirements regarding health and safety protocols. As such, all BWXT new hires will be required to adhere to applicable Company health and safety requirements within the workplace as a condition of employment. BWXT is committed to the concept of Equal Employment Opportunity. We have established procedures to ensure that all personnel actions such as recruitment, compensation, career development, benefits, company-sponsored training and social recreational programs are administered without regard to race, color, religion, sex, national origin, citizenship, age, disability, protected veteran or other protected status. BWX Technologies, Inc. and its affiliates and subsidiaries (BWXT) is not responsible for and does not accept any liability for fees or other costs associated with resumes or candidates presented by recruiters or employment agencies, unless a binding, written recruitment agreement between BWXT and the recruiter or agency exists prior to the presentation of candidates or resumes to BWXT and includes the specific services, job openings, and fees to be paid ("Agreement"). BWXT may consider any candidate for whom a recruiter or agency has submitted an unsolicited resume and explicitly reserves the right to hire such candidate(s) without any financial obligation to the recruiter or agency unless an Agreement is in place prior to presentation and such Agreement explicitly encompasses the job opening for which such fees or costs are sought. An email, verbal or other informal contact with any person within BWXT will not create a binding agreement. Agencies or recruiters without an Agreement are directed not to contact any hiring managers of BWXT with recruiting inquiries or resumes. Recruiters and agencies interested in partnering with BWXT may contact BWXT's Talent Acquisition team at [email protected]. #LI-TC1 Job Segment: Overheard Electrician, Nuclear Engineering, Nuclear, Electrician, Recruiting, Engineering, Energy, Human Resources

We are seeking experienced Journeyman Electricians for a commercial project in Wisconsin. This position offers competitive pay, daily per diem, and consistent overtime for qualified electricians. Qualifications Valid Journeyman Electrician license issued by Iowa or a reciprocating state Current OSHA 10 certification Commercial electrical experience Ability to pass a background check and drug screen Iowa Reciprocal States Alaska, Arkansas, Colorado, Minnesota, Montana, Nebraska, New Hampshire, North Dakota, Oklahoma, South Dakota, Texas, Wisconsin, Wyoming (Reciprocity subject to state approval) How to Apply Call or text ************ or apply directly through LinkedIn.

Job DescriptionSalary: We are seeking Apprentice commercial electriciansto join our team in Houston, TX (The TX Gulf Coast Region includes Houston and Greater Houston area.) As an apprentice commercial electrician, you will work under the guidance of experienced electricians to learn and develop the necessary skills to become a fully licensed electrician. This is a great opportunity for individuals who are passionate about the electrical trade and eager to gain hands-on experience in a variety of settings. Basic Qualifications: -Active TX ID or DL -Active Electrical License -Social Security Card -Tools -Reliable Transportation Duties/Skills/Physical Requirements: - Assist with the installation, maintenance, and repair of electrical systems commercial settings - Learn to read and interpret blueprints, schematics, and technical drawings - Assist in troubleshooting electrical issues and making necessary repairs - Perform basic electrical tasks such as wiring, conduit bending, and circuit installation - Learn to use hand tools and power tools safely and effectively - Follow all safety protocols and regulations to ensure a safe working environment - Collaborate with a team of electricians to complete projects efficiently and effectively -Clear communication skills are required for effective collaboration with team and other construction professionals - Knowledge of high voltage systems - Experience working as a commercial electrician - Knowledge of NEC (National Electrical Code) regulations- Strong understanding of electrical principles and concepts - Basic knowledge of electrical principles and concepts - Familiarity with hand tools and power tools used in the electrical trade - Strong attention to detail and problem-solving skills -Commitment to safety protocols is essential, as the work involves handling potentially dangerous tools and equipment. -Must have the physical ability to perform tasks such as lifting, standing, and walking for extended periods. -The job may involve lifting heavy equipment -Must be able to safely work in various environmental conditions -The role can involve working at heights and in confined spaces. -A neat, clean, tidy, and professional appearance is always the EE standard -Expected work schedule hours: 40 per week Benefits & Perks: Competitive compensation Paid Vacation Paid Holidays (8.5 days) Health Insurance Dental & Vision Insurance (covered by Enterprise.) School Tuition Assistance Opportunities for career advancement Training and development programs 401K Retirement savings plan We offer competitive compensation and the opportunity for career growth within our organization. Job Type: Full-time Enterprise Electrical Core Values: (Greatness) Committed to Excellence (Accountability) Plan it, Do it, Own it (Mentorship) Learn it, Know it, Teach it (Teamwork) One Team, One Goal (Positivity) Positive Attitude Required

We are seeking Apprentice commercial electricians to join our team in Houston, TX (The TX Gulf Coast Region includes Houston and Greater Houston area.) As an apprentice commercial electrician, you will work under the guidance of experienced electricians to learn and develop the necessary skills to become a fully licensed electrician. This is a great opportunity for individuals who are passionate about the electrical trade and eager to gain hands-on experience in a variety of settings. Basic Qualifications: -Active TX ID or DL -Active Electrical License -Social Security Card -Tools -Reliable Transportation Duties/Skills/Physical Requirements: - Assist with the installation, maintenance, and repair of electrical systems commercial settings - Learn to read and interpret blueprints, schematics, and technical drawings - Assist in troubleshooting electrical issues and making necessary repairs - Perform basic electrical tasks such as wiring, conduit bending, and circuit installation - Learn to use hand tools and power tools safely and effectively - Follow all safety protocols and regulations to ensure a safe working environment - Collaborate with a team of electricians to complete projects efficiently and effectively -Clear communication skills are required for effective collaboration with team and other construction professionals - Knowledge of high voltage systems - Experience working as a commercial electrician - Knowledge of NEC (National Electrical Code) regulations- Strong understanding of electrical principles and concepts - Basic knowledge of electrical principles and concepts - Familiarity with hand tools and power tools used in the electrical trade - Strong attention to detail and problem-solving skills -Commitment to safety protocols is essential, as the work involves handling potentially dangerous tools and equipment. -Must have the physical ability to perform tasks such as lifting, standing, and walking for extended periods. -The job may involve lifting heavy equipment -Must be able to safely work in various environmental conditions -The role can involve working at heights and in confined spaces. -A neat, clean, tidy, and professional appearance is always the EE standard -Expected work schedule hours: 40 per week Benefits & Perks: Competitive compensation Paid Vacation Paid Holidays (8.5 days) Health Insurance Dental & Vision Insurance (covered by Enterprise.) School Tuition Assistance Opportunities for career advancement Training and development programs 401K Retirement savings plan We offer competitive compensation and the opportunity for career growth within our organization. Job Type: Full-time Enterprise Electrical Core Values: (Greatness) Committed to Excellence (Accountability) Plan it, Do it, Own it (Mentorship) Learn it, Know it, Teach it (Teamwork) One Team, One Goal (Positivity) Positive Attitude Required

We are seeking Apprentice commercial electricians to join our team in Austin, TX. As an apprentice commercial electrician, you will work under the guidance of experienced electricians to learn and develop the necessary skills to become a fully licensed electrician. This is a great opportunity for individuals who are passionate about the electrical trade and eager to gain hands-on experience in a variety of settings. Basic Qualifications: -Active TX ID or DL -Active Electrical License -Social Security Card -Tools -Reliable Transportation -Take and pass a background check Duties/Skills/Physical Requirements: -Basic math and measurement skills. -Strong work ethic, reliability, and punctuality. -Ability to lift and carry heavy objects and work in physically demanding environments. -Willingness to learn and take directions from experienced electricians. -Strong problem-solving skills and attention to detail. -Assist with the installation, maintenance, and repair of electrical systems commercial settings - Learn to read and interpret blueprints, schematics, and technical drawings - Assist in troubleshooting electrical issues and making necessary repairs - Perform basic electrical tasks such as wiring, conduit bending, and circuit installation - Learn to use hand tools and power tools safely and effectively - Follow all safety protocols and regulations to ensure a safe working environment - Collaborate with a team of electricians to complete projects efficiently and effectively -Clear communication skills are required for effective collaboration with team and other construction professionals - Knowledge of high voltage systems - Experience working as a commercial electrician - Knowledge of NEC (National Electrical Code) regulations- Strong understanding of electrical principles and concepts - Basic knowledge of electrical principles and concepts - Familiarity with hand tools and power tools used in the electrical trade - Strong attention to detail and problem-solving skills -Commitment to safety protocols is essential, as the work involves handling potentially dangerous tools and equipment. -Must have the physical ability to perform tasks such as lifting, standing, and walking for extended periods. -The job may involve lifting heavy equipment -Must be able to safely work in various environmental conditions -The role can involve working at heights and in confined spaces. -A neat, clean, tidy, and professional appearance is always the EE standard -Expected work schedule hours: 40 per week Benefits & Perks: Competitive compensation Paid Time Off Paid Holidays (8.5 days) Health Insurance Dental & Vision Insurance (covered by Enterprise.) School Tuition Assistance Opportunities for career advancement Training and development programs 401K Retirement savings plan We offer competitive compensation and the opportunity for career growth within our organization. Job Type: Full-time Enterprise Electrical Core Values: (Greatness) Committed to Excellence (Accountability) Plan it, Do it, Own it (Mentorship) Learn it, Know it, Teach it (Teamwork) One Team, One Goal (Positivity) Positive Attitude Required

Kidwell is seeking highly motivated individuals to fill the role of commercial Apprentice Electrician in the Columbus, NE area. This position is open to both experienced apprentices and those new to the trade. For entry-level apprentices, we have a formal training program designed to help teach apprentices the trade. For experienced apprentices, we have a dedicated Development Coordinator to ensure your skills are being developed as you prepare for your Journeyman's Exam. These individuals must be team-oriented and possess the qualities of positivity, honesty, and attention to detail. Candidates also need great organizational skills and must be quality communicators. We want everyone to have a first-rate experience when partnering with Kidwell, and Apprentice Electricians will directly represent Kidwell on job sites and in front of our customers. Kidwell Core Values At Kidwell, our core values make us who we are and show in everything we do; Led by passion, we believe our everyday jobs contribute to something bigger than ourselves. We pride ourselves in our creativity, but also in the effective solutions we create that bring value to our customers. Our employees act like owners, who take initiatives to lead and are treated like family. We are relentless and see work ethic and accountability as the baseline in the pursuit of excellence. What You'll Do * Assist Journeyman Electricians with installing and repairing electrical wiring, fixtures, and equipment * Preform daily responsibilities that include * Measure, cut, and bend wire and conduit * Drill holes for wiring and pulls * Trace out short circuits in wiring * Gather tools and supplies to be used at work site * Install fixtures * Assist our cabling and special systems teams when needed to install, configure and troubleshoot low voltage electronic systems including: nurse call, CCTV, access control, sound systems and audio-visual systems. * Opportunities to take on a variety of other tasks based on skill set and interests Requirements * Candidates must possess a current State of Nebraska Electrical License. If not currently licensed, candidates must apply before starting. * Associates degree in electrical technology (or similar field) preferred but not required * Field experience as commercial electrical apprentice preferred but not required * Candidates must have good leadership and people skills * Ability to pass physical exam and drug screening * Must maintain a valid driver's license Benefits- This position offers a competitive salary with career development potential. We highly encourage and even reimburse certain certifications/trainings. Additionally, we offer health, dental, life, and disability insurance along with paid vacation, paternity/maternity leave, holidays, sick leave, tool/clothing stipend, and 401k with company match.

Kidwell is seeking highly motivated individuals to fill the role of Mission Critical (Data Center) Apprentice Electrician in the Kansas City Market for three to four months. After that commitment is filled, candidates must be willing to travel to other Data Center locations. This position is open to both experienced apprentices and those new to the trade. For entry level apprentices, we have a formal training program designed to help teach apprentices the trade. For experienced apprentices, we have a dedicated Development Coordinator to ensure your skills are being developed as you prepare for your Journeyman's Exam. These individuals must be team-oriented and possess the qualities of positivity, honesty, and attention to detail. Candidates also need great organizational skills and must be quality communicators. We want everyone to have a first-rate experience when partnering with Kidwell, and Apprentice Electricians will directly represent Kidwell on job sites and in front of our customers and trade partners. Kidwell Core Values At Kidwell, our core values make us who we are and show in everything we do; Led by passion, we believe our everyday jobs contribute to something bigger than ourselves. We pride ourselves in our creativity, but also in the effective solutions we create that bring value to our customers. Our employees act like owners, who take initiatives to lead and are treated like family. We are relentless and see work ethic and accountability as the baseline in the pursuit of excellence. What You'll Do * Assist Journeyman Electricians with installing and repairing electrical wiring, fixtures, and equipment * Earn competitive wages and overtime and must be able to work multiple Saturdays and possible Sundays. * Perform daily responsibilities that include * Measure, cut, and bend wire and conduit * Drill holes for wiring and pulls * Electrical metering and troubleshooting * Gather tools and supplies to be used at work site * Install fixtures * Create and maintain a safe work environment, meeting or exceeding OSHA regulations and project safety requirements * Assist our cabling and special systems teams when needed to install, configure and troubleshoot low voltage electronic systems including: nurse call, CCTV, access control, sound systems and audio-visual systems. * Opportunities to take on a variety of other tasks based on skill set and interests Do You Have What it Takes? * Candidates must possess a current State of Nebraska Electrical Apprentice License. If not currently licensed, candidates must apply before starting work. * Associates degree in electrical technology (or similar field) preferred but not required * Field experience as commercial electrical apprentice preferred but not required * Experienced in Mission Critical (Data Center) work or commercial industrial electrical work preferred but not required * Candidates must have good leadership and people skills Ability to pass physical exam, drug screening, and background check (One Source 2+ or equivalent level). * Must maintain a valid driver's license Benefits- This position offers a competitive salary with career development potential. We highly encourage and even reimburse certain certifications/trainings. Additionally, we offer health, dental, vision, life, and disability insurance along with paid vacation, parental/maternal leave, holidays, sick leave, tool/clothing stipend, and 401k with company match

Kidwell is seeking highly motivated individuals to fill the role of Prefabrication Apprentice II. This position is open to experienced apprentices with experience in residential wiring. The Prefabrication Apprentice II is responsible for supporting the company's prefabrication and kitting initiatives through the creation of assemblies and kits. All work will be performed in the Kidwell Prefabrication Shop (Lincoln) in a temperature-controlled environment. The Prefabrication Apprentice must be team-oriented, have great organizational skills with attention to detail, be honest, positive and possess quality communication skills. Kidwell Core Values At Kidwell, our core values make us who we are and show in everything we do; Led by passion, we believe our everyday jobs contribute to something bigger than ourselves. We pride ourselves in our creativity, but also in the effective solutions we create that bring value to our customers. Our employees act like owners, who take initiatives to lead and are treated like family. We are relentless and see work ethic and accountability as the baseline in the pursuit of excellence. Primary Duties and Responsibilities: * Production of prefabricated assemblies and kits including: * Measuring, cutting and bending of wire and conduit. * Assembling boxes and spooling wire and cable. * Making terminations and joints. * Organization of kits including: * Applying labels to wire bundles or assemblies. * Labeling box assemblies. * Packing boxes with assemblies and plans. * Organizing kits for pickup. * Operation and maintenance of shop equipment including: * Table benders, offset benders, Threaders, drill press, Band saw, chop saw * Operation of fork lift. Delivery of kits to job sites using Kidwell box truck. * Providing prefabrication and kitting to support all Kidwell areas of proficiency including electrical, fire alarm, data cabling, audio visual, access control, security, cameras, nurse call. * Maintaining a clean, organized workspace and production area. * Assisting with material intake and organization. * Collaborating with Staff to clarify or strengthen documentation. * Adherence to all Kidwell standards for quality and safety. * Participation in weekly team meetings and safety trainings. * Other duties as assigned. Job Experience and Requirements: * Candidate must have great organizational skills with attention to detail, be a team player who is honest, positive, and communicates well with others. * A physical exam and drug screening must be passed. * Candidate must be able to pass a physical exam, drug screening, and background check. * Field experience as a commercial electrical apprentice or in manufacturing is preferred but not required. Benefits This position offers a competitive salary with career development potential. We highly encourage and even reimburse certain certifications/trainings. Additionally, we offer health, dental, life, vision, and disability insurance along with paid vacation, parental leave, holidays, sick leave, tool/clothing stipend, and 401k with company match.

Alutiiq Operations Services, LLC has an exciting opportunity for a High Voltage Supervisor supporting Tinker Air Force Base located in Oklahoma City, OK. The High Voltage Supervisor manages and directs teams responsible for the installation, maintenance, and repair of high-voltage electrical systems, ensuring safety, compliance, and efficient operation. The High Voltage Electrician Supervisor serves as the subject matter expert (SME) for the electrical work of the Utilities Shop, responsible for the accountability of assigned employees, tools, equipment, and other resources in the accomplishment of contract requirements. Serves as the SME in performance of services, installation and repairs of electrical, lighting and control systems in base facilities (including industrial and commercial systems) utilizing knowledge of electrical theory. The High Voltage Supervisor is responsible for the safe operation and maintenance of the high voltage/power generation infrastructure. Assists in the creation and implementation of work schedules, material requirements and personnel resources to ensure contract requirements are properly met. Ensures employee compliance with safety, security, property and material management, as well as time and attendance. Inspects work in progress and completed work to ensure accomplishment in most effective and efficient manner. Installs, maintains, or repairs equipment for the generation, distribution, or utilization of electric energy. Installs, repairs, or replaces a variety of electrical equipment such as generators, transformers, switchboards, controllers, circuit breakers, motors and other transmission equipment. Performs high voltage switching during scheduled and non-scheduled power outages. Works from blueprints, drawings, layouts, or other specifications. Locates and diagnoses malfunctions in the electrical system or equipment. Performs work on overhead lines, substations and in manholes; under limited circumstances with Supervisor approval, may be required to perform work on energized circuits. Works from, operates, and drives bucket and pole trucks. Reads and maintains utility meters. Performs standard computations relating to load requirements of wiring or electrical equipment. Uses a variety of high voltage electrician's hand tools, measuring and testing instruments. Operates and maintains 12KV electrical distribution lines, transformers, and substations. Adheres to safety practices and procedures, such as checking equipment regularly and erecting barriers around work areas. Identifies defective sectionalizing devices, circuit breakers, fuses, voltage regulators, transformers, switches, relays, or wiring, using wiring diagrams and electrical-testing instruments. Performs cable splicing and terminations to various cable types (lead, EPR crosslink, etc). Informs supervisors on whether continued operation of equipment could be hazardous. Carries proper tools/testing devices/equipment and accomplishes repairs according to accepted trade practices. Uses electrical skills, multi-meters, and meggers to measure voltage and ohms readings to troubleshoot circuit boards and other electrical circuitry. Perform periodic maintenance inspections of all equipment associated with electrical systems and report all system discrepancies or conditions to your Supervisor. Complies with all OSHA and 70E safety regulations and adheres to proper codes and standards with a thorough understanding of safety procedures related to Electrical Systems and Lock out/Tag out Procedures. Utilizes Safety Data Sheets to identify chemical characteristics. Completes Work Orders daily and accurately. Monitors work done by outside contractors for adherence to state and federal Code Requirements and reports back to supervisor. Assists in the writing of specifications for repairs and new construction. Assists in the training and development of staff in related fields. Assists in the procurement of parts and materials for job completion. Requirements Eight years' experience required as an High Voltage Electrician relevant to the job description. Demonstrated knowledge of codes and regulations related to the National Electric Code (NEC) and other local codes is required. Demonstrated knowledge of high voltage regulators and their operation is required. Candidate must comply with OSHA and NFPA regulations. Valid State of Oklahoma Class "B" CDL or equivalent required. Must be CPR qualified or become CPR qualified within 45 days of hire date (company provided). Valid Journeyman Electrician License; Ability to read blueprints or technical diagrams, install and maintain wiring, control, and lighting. Aptitude in math and strong problem-solving abilities. Ability to solve problems and work independently without supervision. Must be able to organize staff and materials, disseminate information, and track project progression. Ability to adapt to changes in technology and applicable facility/infrastructure codes and standards. Previous experience working on a military installation. Ability to deal with a variety of people in a professional and courteous manner in diverse situations. Basic computer skills and familiarity with Microsoft Office applications Preferred Qualifications and Experience: Master Electrical License Pay range: $75,000 to $90,000 per year