Field engineer jobs in Bellevue, WA

*We* are a leading consulting partner specializing in Technology, Strategy and IT Staffing Services. Find out exactly what skills, experience, and qualifications you will need to succeed in this role before applying below. *You *will perform services testing, analysis, and troubleshooting of services like Data, Voice, Video, Chat, SMS data, etc. using wireless devices in a production environment against 5G, 4G, LTE and IMS core infrastructure. *You need* * Define End-To-End test strategy and test plans with entry and exit criteria, focused on how 5G wireless customers interact and transact with AT&T. Set priorities for test coverage, and identify a prioritized set of opportunities for automation, with a focus on execution and on-time delivery at quality * Responsible for End to End service testing, Sanity Testing, Regression testing execution of network deployment analysis in identified markets and Network. * Automation mobility testing experience with tools like MEX, Opentool, Landslide, Softest or ANT * Experience in Network validation of EPC / IMS call flows as per 3GPP specs for EPC signaling flows and IMS call flows for different services. Understanding, identifying and troubleshooting call flows. * Collaborating with service architects to understand new services and identifying end to end test cases, creating TOL (Test Object list) of all impacted scenarios to be evaluated and tested in order to certify the service * Working experience in 5G SA, NSA, LTE, VoLTE, VoWIFI, IMS Converged and PSTN transformation solutions for network operators. * Domain knowledge and experience on IMS architecture, EPC architecture (Network topology & LTE-EPC, IMS) * Protocol knowledge of SIP, DIAMETER, GTP, S1AP etc. and the signaling flows across the network * Packet Analysis for VoLTE network Protocols around Wireless domain of LTE (Packet Core) and IMS network Protocols & Interfaces using tracing tools to capture DIAMETER, GTP , SIP, other LTE-EPC & IMS Protocols. * Validation with architect team to ensure the correct call flow, clearly and accurately document and discuss the discrepancies, anomalies or issues with the test case. * Experience in both IMS and EPC mobility core and working experience with IRIS, RADCOM, Jira, wireshark tracing tools and HP ALM Quality Center. xevrcyc * Good understanding of testing processes/methodologies and Test Tools and well versed with test planning and acceptance phase till the point of customer sign-off. Job Type: Full-time Pay: $30.00 - $65.00 per hour Benefits: * Flexible schedule * Paid time off * Parental leave * Professional development assistance * Referral program Experience: * 3GPP Call flow: 3 years (Required) * LTE packet core: 5 years (Required) * IMS USP: 5 years (Required) * 5G: 1 year (Required) * Test automation: 2 years (Preferred) Willingness to travel: * 25% (Preferred) Work Location: Multiple locations

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Electromagnetic Effects (EME) is currently seeking a highly motivated Electromagnetic Effects Engineer (Entry-level or Associate) to join the team in Everett, WA. Position Overview: This position will support one of many Boeing Commercial Airplanes programs from 737 to 787 and beyond. All projects center on the translation of concepts and high-level requirements to specific architectures and operational specifications; Work with systems engineers to validate designs through analysis, laboratory and/or airplane testing; Work with aircraft systems from initial concept through certification, delivery and for continued enhancement as long as they remain in service. Interested in learning more about this job Scroll down and find out what skills, experience and educational qualifications are needed. Specific job responsibilities may include developing requirements for such systems, developing or reviewing hardware and software designs and interface specifications, system modeling and simulation, testing and validation in the laboratory or airplane, and working with other aerospace system suppliers to ensure effective system integration and customer satisfaction. Additional assignments supporting the development of Design Practices, certification deliverables, test reports, and documents as needed. Position Responsibilities: Assists in developing and documenting requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components. Performs analysis to predict component performance to established requirements. Conducts tests to validate performance of designs to requirements. Collects data on supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle. Supports project management by gathering project status data. Gathers information to support development of sections of proposals to support development of new business. Provides limited direction and conducts limited oversight of entry level and developing engineers. Works with limited supervision. Work Authorization: This position is expected to be 100% onsite. The selected candidate will be required to work onsite at Everett, WA. Basic Qualifications (Required Skill/Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science. Preferred Qualifications (Desired Skills/Experience): 1+ years of related work experience or an equivalent combination of education and experience Experience working in a laboratory test environment Experience in commercial or military airplane maintenance and/or modification Experience or education with electromagnetic theory and advanced mathematics necessary to perform or conduct electromagnetic analysis, design, modeling and testing Experience in computational analysis Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation: This is a union represented position. Pay and Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: Entry-Level (Level 1) : $70,550 - $95,450 Associate (Level 2): $85,850 - $116,150 Additional Information: All information provided will be checked and may be verified. Applications for this position will be accepted until Dec. 01, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. xevrcyc Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Who We Are Coughlin Porter Lundeen is a civil and structural engineering firm. Focused in the Pacific Northwest, we partner with clients across markets to bring unique project visions to life. We were founded with the goal of exceeding the standards and services provided by engineering firms. And today, more than 30 years later, that vision continues to guide all that we do. Our core values are the heart of who we are and guide how we work each day. Commitment to Quality, every drawing, every detail. Creativity, from project solutions to the way we define our roles. A “Client-First” Mindset, cultivating long-term partnerships. An Empowered Team, continued learning and development. Collaboration and Respect, with our clients and within our own professional work environment. Community, supporting the causes most important to our staff and city. Description Coughlin Porter Lundeen is seeking a structural project engineer; this position involves the design and preparation of construction documents on diverse project types including a variety of building materials. As an integral member of the design process, structural engineers are challenged to develop project management skills, lead in-house design teams, and work firsthand with a diverse range of clients. Engineers are involved with every aspect of the project from design through construction. This position requires sound technical skills, strong communication skills, and a professional attitude. Minimum Qualifications BSCE or MSCE degree (MSCE Preferred) 4+ years structural design experience P.E. license preferred Physical Requirements Ability to drive as needed to client project locations (primarily in the greater Seattle area). Able to travel by airplane domestically as needed for client projects (outside the greater Seattle area), campus recruiting, conferences, etc. Requires sitting for extended periods of time at a computer, keying and reading content. Will be required to stand, reach, bend, twist, squat, and move about freely in an office environment. May need to be able to lift up to 25 lbs. Able to use office equipment such as phone, copier, printer, etc. Benefits and Compensation $92,000-$115,00 per year (depending on experience and qualifications) Additional compensation for hours worked in excess of 40 hours weekly (paid quarterly) Medical (HSA with employer contributions), dental and vision Company paid life and AD&D insurance Company funded ORCA card PTO (15 days starting) 8 paid national holidays (including 1 floating holiday) 401(k) matching Annual bonuses and profit sharing (at company discretion) Monthly health and wellness stipend Employee assistance program Additional information regarding our workplace and benefits can be found here.

Pacific Pile & Marine (PPM) is a heavy civil and marine general contractor providing top-tier services along the West Coast of the United States and Canada. Headquartered in Seattle, WA, PPM specializes in diverse marine and transportation infrastructure projects, including bridges, ports, marine structures, dredging, and environmental construction. The company serves regions across Washington, Oregon, Idaho, Montana, Alaska, California, Hawaii, and British Columbia. Known for its cutting-edge industry leadership, PPM seeks motivated, team-oriented professionals to support its innovative and impactful projects. Role Description This is a full-time, on-site Project Engineer role located in Seattle, WA or Anchorage, AK. Project Engineers are responsible for performing duties in the field and directly gathering, calculating, and compiling data for the engineering and business functions of a project. It is expected the Project Engineer will provide technical engineering information to company supervision and field crews to ensure construction work complies with all engineering standards, codes, specifications, and design instruction applicable to one or more disciplines. Essential Duties and Responsibilities: Manage the measurement, review, approval, documentation, and input of project quantities. Construct the project budget from the conformed estimate, working with the superintendent and project manager to select the appropriate work activities and cost codes. Establish and maintain the project contract administration plan. Assist project manager with reviewing and preparing month‐end cost reports including the monthly Progress Statement and Job Operations Report (JOR). Assist with cost forecasting and revenue projections. Manage the project recordkeeping and correspondence functions. Maintain tracking logs for change orders, RFI's, submittals, and letters. Maintain the project daily report. Manage the preparation, review, approval, and forwarding of the project submittals. Prepare and submit progress invoices to the owner with Project Engineer / Project Manager review. Work with superintendents, project engineers, and project managers to develop a project plan to create a project CPM Schedule. Manage and maintain the project schedule. Manage the subcontract and procurement process including directing or performing the solicitation, review, and document preparation elements. Participate in the project safety process, conduct safety inspections, and contribute to weekly toolbox meetings, mass safety meetings, and safety training. Coordinate and assist in the documentation, preparation, and resolution of change orders and extra work efforts. Generate engineering feasibility studies to support planning and scheduling efforts. Assist with managing the collection, review, approval, and processing of the daily labor timesheets. Setup, control, and manage all engineering and project records/files. Provide engineering support to field and office operations. Take the lead in working with designers and/or engineers to do value engineering, material substitutions, and engineering-related constructability issues. Manage the project turnover process as it relates to punch list, quality control, commissioning, final documentation submission, and check‐out of installed systems. Qualifications Bachelor's degree in Engineering or Construction Management or equivalent combination of technical training and related experience. Demonstrated ability to implement, utilize, and manage the cost management process including quantities, cost reports, forecasting, labor reports, and documentation & recordkeeping. Ability to efficiently perform the contract administration functions including correspondence, document control, daily reports, and change orders/claims preparation. Ability to efficiently perform the project administration processes including accounts payable, accounts receivable, and subcontractor/supplier correspondence & tracking. Demonstrated proficiency to develop, analyze, and maintain complex project schedules. Demonstrated understanding of company safety philosophy and a working knowledge of the Safety and Crisis manuals. Effective communication skills, both oral and written, including the ability to compose and edit professional letters to external organizations including customer, vendor, government agencies, and subcontractors. Ability to organize and supervise individual engineering functions. A rudimentary knowledge of survey. Strong computer skills including the ability to use Microsoft products such as Word, Excel, Project, and Outlook. Ability to give oral presentations using PowerPoint. Compensation and Benefits Washington Salary Range of $79,800 to $105,000 depending on experience. Retirement Plan including up to a 4% employer match. Three weeks paid vacation per year. 14 Paid Holidays per year. Sick leave provided per WA Paid Sick Leave Law. Employees (and their families) are covered by Medical, Dental & Vision Benefits. Annual Bonus program Valid driver's license and acceptable driving record required to operate company vehicles. A pre-employment drug screen and background check will be conducted. To apply, please email your resume and salary requirements to ***********************. Pacific Pile & Marine is an Equal Employment Opportunity Employer. All qualified applicants will be considered, regardless of race, gender, or status as an individual with a disability or veteran.

This position is responsible for installing, maintaining and evaluating IT systems to include networking, communications, server, desktop, and OT manufacturing systems. Troubleshoots complex network, server, and desktop issues involving various factors and conducts network architecture design, feasibility, and cost studies. ***Up to 30% travel required*** ESSENTIAL DUTIES AND RESPONSIBILITIES: May include some or all of the following. Other duties may be assigned. Maintains personal knowledge of vendor technologies and associated software. Design and deploy new platforms and enhancements to existing network, server, and desktop equipment including routers, switches, access points, controllers, and physical and virtual servers. Configures, monitors, and troubleshoots enterprise (IT) and manufacturing (OT) network equipment. Resolves complex issues involving a wide range of technologies. Works with carriers and configures/troubleshoots Internet, Broadband, MPLS, SD-WAN and other WAN circuit types and equipment. Conduct research on network products, services, protocols and standards to remain abreast of developments in the networking industry. Review technical requirements, establish project milestones and tasks, and determine level of effort estimates for their completion. Performs system administration functions necessary to support continuous day-to-day system operations. Understand and abide by Incident, Problem and Change Management processes and procedures. Performs expansion, relocation and consolidation of IT and OT systems for designated corporate locations. Develops and maintains IT and OT system documentation. Maintains involvement with other aspects of IT systems infrastructure by participating in Agile/Scrum process for the IT Operations systems team. Assists with root cause analysis for outages and delivering SOPs. Provides on call support required to bring IT and OT systems to operational states. Performs other related duties and projects as business needs require at direction of management. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Bachelor's degree (B. A.) from four-year college or university; and four (4) to seven (7) years related experience and/or training; or equivalent combination of education and experience. Hands on, demonstrable experience in one or more of the following technologies: Cisco, HP, Aruba, Brocade, Checkpoint, Palo Alto, Bluecoat, Infoblox, Solarwinds, F5, Microsoft. 7+ years' experience supporting enterprise networks and/or large data center environment. 7+ years' design and implementation of layer2/layer3 routing and switching on Cisco IOS or Data Center products. Strong network fundamentals including the OSI model, TCP/IP, IPv4 and working knowledge of IPv6. - Documented expertise with network configuration, security principles and maintenance best -Advanced competence with monitoring tools, techniques, alerting and notification processes. -Expertise with fault isolation, testing procedures, and network mapping and diagramming tools. Understanding of dynamic routing protocols with a minimum of 2 years' experience in design and implementation of network design. Competence with testing tools and procedures for voice and data circuits. 7+ years' experience supporting Dell servers, iDRAC, and KVMs Strong systems administration fundamentals including DNS, DHCP, Windows AD, and Window Servers. Working knowledge of ESX, SAN, Splunk, Veeam, and Avanti. Familiarity with Linus OS related technologies. Ability to interpret technical drawings and specifications and implement network configurations that meet those documented requirements. Ability to set priorities, meet deadlines and manage projects. Good written and oral communication skills; good interpersonal skills. Language Ability: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures or government regulations. Ability to write reports, business correspondence and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, customers, co-workers, and vendors. • Math Ability: Ability to add, subtract, multiply and divide in all units of measure using whole numbers, common fractions and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. • Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, verbal, diagram or schedule form. • Computer Skills: Must be able to operate a personal computer and other various standard office machines and equipment necessary to complete duties. Must have extensive knowledge of Internet, computer, routers, switches, firewall, etc. • Supervisory Responsibilities: NA • Certificates/Licenses: Cisco CCNP / Aruba ACSP or better certification. IIS and SSL certification. Valid driver's license required.

KGS Group is looking for an Electrical Engineer to join our Bellevue, WA or Granite Bay, CA. About Us We are KGS Group, an employee-owned, multidisciplinary engineering consulting firm serving clients throughout North America. We're different than traditional engineering firms. We believe a commitment to lasting relationships is just as critical as the expertise applied in our work. To us that means we put our clients and people first. We have the discipline to consistently deliver KGS Quality, never taking the easy way out. We always look closer and dig deeper. And no matter the project, we care enough to do it right. As an employee-owned company, we're invested in our work and our people. Working with us means you'll be part of some of the most interesting projects up and down the west coast. With the extensive, wide-ranging expertise within our company, you'll have countless opportunities to learn and grow. Many of our core clients operate in the hydropower and water management fields. We are growing our U.S. team to continue to provide our industry-leading services to these clients. As we expand our presence on the west coast, we are looking for strong candidates at all levels to join our team! The Role As an Electrical Engineer, you will be responsible for providing engineering inputs integral to both small and large-scale hydro and dam projects. You will lead and mentor teams, support management of production and coordinate delivery of engineering work products often with multi-disciplinary project team members and external stakeholders. You will not only support and help grow the broader engineering team capabilities, but your particular focus will be on continuing the development of our hydropower capabilities and working with key staff in growing the business. You'll also be involved in supporting project management duties, coordinating with internal and external clients as well as assisting with guiding and mentoring other engineers within the team. In this role you will lead teams conducting technical work for feasibility studies, engineering designs, preparation of construction drawings and specifications, and carrying out inspections for rehabilitation projects for dams and hydroelectric facilities. Your particular focus will be design delivery and mentorship, but you will also be involved in the proposal process. You will be working in a collaborative environment with a great team of engineers, technicians, scientists, and other industry-leading peers. Key Responsibilities Provide input to those managing and executing multiple projects (small to large) from the proposal stage through to completion Establish connections with other departments to support and enhance service delivery Work collaboratively with other disciplines and multidisciplinary project teams to execute project deliverables, as well as ensure that quality objectives, schedules, and budgets are met Mentor junior staff Design modifications to, or entirely new electrical, instrumentation, and controls systems related to dams, control structures, water retaining structures, switchyards and hydroelectric generating stations Conduct feasibility studies for proposed designs and assess costs and benefits for alternatives in a systematic and thorough manner. Manage and execute multiple projects from the proposal stage through to completion; Projects will include a variety of small to large projects involving water resources, flood control and hydroelectric sectors Prepare and review reports Perform calculations Conduct inspections and support project work on site as required Edit and prepare design specifications Conduct QA/QC reviews and facilitate the KGS's QA/QC process. Contribute to the development of the electrical engineering practice at KGS by assisting the electrical design leadership by documenting technical knowledge, improving internal production processes, coordinating and developing internal training content, and other tasks. Perform other duties as assigned About You To fill the role, we're looking for an applicant to bring forward a good mix of qualifications and previous experiences. Some highlights should include: Minimum of a Bachelor of Science (BS) degree in electrical engineering from a recognized university; A post-graduate degree is an asset Minimum of 7-15 years of experience in electrical engineering with demonstrated project management skills (tracking budgets and meeting schedules) Must be registered as a Professional Engineer (P.E.) in Washington, Oregon, or California, as well as eligible for registration as a professional engineer in other states via comity within three months of starting. Previous consulting experience is preferred but not required. Excellent verbal and written communication skills Candidate must be self-motivated, and able to work independently with minimal supervision Must be able to effectively assume a lead role as project engineer and communicate project and technical information with clients Demonstrated experience in site investigations, condition assessments, design and construction support are preferred Experience with station service distribution (all voltages), medium voltage equipment, fixed bus power distribution systems, Programmable Logic Controller (PLC) automation (for equipment control), generators and transformers including related monitoring systems, communication systems, system grounding, hoists and gate automation and balance of plant systems for hydroelectric stations preferred, but industrial experience will be considered Experience with the following would be considered an asset: Backup power systems (including Uninterruptible Power Supply (UPS), Direct Current systems and fuel fired backup) Lighting (including emergency and exit lighting systems) Fiber and copper structured cable systems, and associated networking equipment Distributed Control System (DCS) and PLC Automation, Human Machine Interface (HMI) and Remote Terminal Unit (RTU) integration (including any programming experience) Protection systems experience, including specifying, setting and verifying (include reference to voltages) Load flow analysis, system modelling, arc-flash, grounding, and other electrical studies (include reference to software used and any training) North American Electric Reliability Corporation (NERC)/Critical Infrastructure Protection (CIP) planning Physical or cyber security planning or design Unit outage planning Other renewable energy experience Travel to project sites is usually limited but is required depending on project/client requirements. The amount of travel time desired by our employees can usually be accommodated. Must possess a valid driver's license and the ability/willingness to undergo security clearance checks Have the drive, attitude and commitment to being an active participant in our employee-owned culture is a must The salary range for this position is $120,000 to $155,000 annually. Please note that the salary range mentioned in this job description should serve simply as a guide. The final compensation offered may vary based on a variety of factors, including candidate's experience, skills, and location. KGS Group is committed to providing a fair, equitable, and competitive package that reflects the value an individual brings to the organization. KGS Group is an employee-owned equal opportunity company offering an excellent compensation and benefits package. KGS Group welcomes and encourages applications from people with disabilities. Upon request, KGS Group will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process.

HCLTech is looking for a highly talented and self-motivated Electrical Engineer to join it in advancing the technological world through innovation and creativity. Job Title: Electrical Engineer Position Type: Full Time Location: Redmond, WA Key responsibilities: Develops Schematics and BOM to meet the design requirements. Analyzes the design with simulation tools and calculations to verify its conformance to the design requirements. Works with suppliers, contractors, and engineering services to ensure that the product is developed on time with high quality Collaborate with mechanical engineering, firmware, hardware verification, and many other engineering and design disciplines to optimize the overall system of the product from concept to completion in the factory Design, build and test rapid prototypes for evaluation of new product ideas or technology concepts. Conducts design/debug investigations and support development, maintenance, failure analysis, and resolution activities. Develop project documentation including specifications, schematic diagrams, PCB layouts, schedules and presentations to meet requirements and communicate the electrical design and its progress Requirements: Minimum BS/MS in Electrical or Computer Engineering or related field. 8+ years of experience designing, implementing, and shipping high volume consumer electronics products of medium to high complexity. Hands-on design experience preferred in analog/ digital electronics ranging from: RF, analog, digital, audio, video, power, electromechanical, low power, charging, touch display, and sensors. Experience preferred with x86 PC and or ARM architectures and implementation of high speed serial busses (PCIe, DP, USB4, Thunderbolt, MIPI) and high speed parallel busses such as: memory bus (DDR4/5, etc.) Proficient in high speed digital design, signal integrity, layout, and power distribution techniques of modern processors Problem solving and debugging skills with a solid understanding of core engineering principles, fundamental circuit design, and analytical techniques is required. Demonstrated communication skills required, including the ability to clearly express technical concepts in verbal and written forms. Pay and Benefits Pay Range Minimum: $120K/Year Pay Range Maximum: $140K/Year HCLTech is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to ****************** for investigation. A candidate's pay within the range will depend on their skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year How You'll Grow At HCLTech, we offer continuous opportunities for you to find your spark and grow with us. We want you to be happy and satisfied with your role and to really learn what type of work sparks your brilliance the best. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries. We believe that you should be in control of your career with unlimited opportunities to find the role that fits you best.

ABOUT THE COMPANY ConeTec is an international full-service geo-environmental and geotechnical site characterization contractor. We offer clients superior project management and site investigation services across the globe, with a large presence in the Americas, Europe, Africa and Oceania. ConeTec is known in the industry as a great place to work. We commit to all employees that we will provide a respectful, positive, and enriching work environment. We want you to look forward to going to work every day. We reward and recognize staff for exceptional contributions to the company. Our success is a direct result of the people who work here. ConeTec offers a comprehensive benefits package for all regular full-time employees including extended health, dental, long-term disability and life insurance, wellness program, 401K matching, corporate stock incentives, a referral bonus, professional development and more. SCOPE OF POSITION The Field Engineer or Field Geologist will assume numerous other roles ranging from Field Engineer, Assistant Field Operator, Assistant Geophysicist, as the ever-changing demands of the workplace dictate. A successful candidate must have well-developed interpersonal, organizational and communication skills as well as strong problem-solving abilities. The position will sometimes involve significant amounts of travel. As part of a small growing team of employees, you will be relied on for your flexibility and versatility. OVERALL GOALS FOR POSITION Gain experience and exposure as a contractor in the commercial development, environmental, construction and infrastructure industries Expand a diverse skill set through training, certifications and experience to become an asset to a larger team Complete complex site investigation programs throughout North America that we operate in. Assist in developing new business by providing a wide-ranging skillset. ROLES, RESPONSIBILITIES & EXPECTATIONS Equipment Operation Familiarize with and operate High Resolution Site Characterization tools for environmental site investigations, SCPTu equipment, VST, MASW, numerous geophysical instruments and other in-situ testing equipment safely and productively. Become trained, company-certified and competent to operate numerous types of geotechnical site testing equipment and other pieces of equipment within our extensive fleet. Organize logistics for the mobilization and demobilization of equipment in hard-to-access environments. Perform routine maintenance on various pieces of equipment to ensure optimal performance. Data Collection & Reporting Perform testing to collect data in a timely, orderly and accurate manner. Compile the collected data, sample logs, etc. daily and submit to the Engineer/Supervisor and/or client for further processing. Collect field notes and photos to guarantee the translation of data from the field to the office is as highly accurate as possible. Prepare and compile final field reports. Health & Safety Identify with and respect ConeTecs safety culture, first and foremost. Ensure proper preparation and knowledge of all necessary safe operating procedures before beginning any job. Report any safety-related incidents, infractions, or near misses to the Project Manager and the HSE Officer, immediately. Know and follow the incident reporting protocol at all times. Other General Responsibilities Communicate with the Supervisor or Project Manager as to any equipment problems or needs, as well as any field observations that might be of use. Perform other shop functions as required. SKILLS, QUALIFICATIONS AND EXPERIENCE REQUIRED Education Requirements Bachelors degree in engineering, Applied Science, Geology, Geophysics or Related Fields is preferred Knowledgeable in a wide range of ConeTec's testing types and mechanically inclined. Mechanics and problem-solving skills preferred Drivers license and clean driving record. Experience driving pickup trucks or other large vehicles is preferred Occasional long days of 12+ hours, frequently 10+ hours Experience Requirements Previous field experience would be an asset but not required. Be able to work in a variety of remote locations. Approximately 30% out of town work. Technical Skill Requirements Must be able to perform physically demanding tasks, including lifting, moving heavy materials up to 50 lbs., climbing, crawling as well as walking on uneven ground, working long hours in all weather conditions Electrical and mechanical technical skills are an asset. Having data processing and report preparation skills is an asset Soft Skill Requirements Must possess a strong work ethic and professionally represent the company. Must be able to establish and maintain effective working relationships. Must be responsible and work well independently or in a team setting with minimal supervision. Must enjoy working outdoors and travelling for extended periods. Must enjoy performing a wide variety of duties and be able to manage multiple tasks and priorities. Strong decision-maker with the ability to work independently in remote locations. Other Requirements Must be flexible and capable of taking on a variety of roles as required by business needs. Flexibility with schedule and variable workloads. Must possess a safety-oriented mindset and get onboard with strong safety culture at ConeTec. As part of our dedicated focus on the health and safety of all employees, and due to the requirement that employees be able to safely complete the tasks associated with this job position, a successful candidate may be required to take a pre-employment fit for duty test, including a drug and alcohol testing, and complete a satisfactory criminal record check. ConeTec is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status, or any other status protected by applicable law.

Quest Integrity, a global leader in inspection and engineering services, is seeking a Field Engineer that will manage inspection tool needs, task lists and related projects, including ILI tool diagnostic initiatives when challenges are encountered and implementation of all lessons learned from these challenges.

JOB TITLE: DEPARTMENT: PHOENIX FIELD ENGINEER CONSTRUCTION COMPANY INFORMATION: Established in 1986, ATS Automation is the leading provider of energy management services, automated control systems, critical airflow solutions, and building systems integration. We aim to be the market leader in excellence in building technologies by providing the industry's best teams, engineered solutions, service support, and products. At ATS, we custom engineer and install building automation systems to optimize buildings' mechanical and electrical systems, reduce building energy consumption, increase tenant comfort, and maximize the productivity of tenants and facilities management personnel. Headquartered in the Pacific Northwest, with 14 offices and growing across the United States, we support and manage complex building automation and controls projects across the country and abroad. We seek out candidates from diverse backgrounds who are curious and eager to learn, have excellent communication skills, and who possess an exceptional work ethic and initiative. ATS is committed to employee development and offers an extensive training program and ongoing advancement to all employees. Our company has a strong track record of employee retention, and we take pride in providing opportunities for our team to grow their careers and achieve long-term success at ATS. JOB SUMMARY: As a Phoenix Field Engineer, you will be responsible for implementing Phoenix Controls systems in accordance with project plans, specifications, and contract documents. This role requires a strong understanding of building control and mechanical system performance at both the system-wide and campus level, with a particular focus on critical environments such as laboratories and healthcare facilities. You will ensure that all project documentation is accurate, thorough, and up to date, while also providing supplemental project management support as needed, including direct interaction with customers and stakeholders. In addition, you will coordinate with Phoenix Controls suppliers to ensure timely and accurate product ordering, delivery, and fulfillment. DUTIES AND RESPONSIBILITIES: Complete Phoenix control system responsibility Execute Phoenix Controls configuration Manage the start-up and commissioning of Phoenix Systems Engineer field changes and maintain as-built documentation Troubleshoot component and equipment problems Conduct on-site owner training as part of project closeout Support project management tasks including job planning, labor planning, scheduling, fiscal analysis, etc. Material ordering and coordination Manage time to complete assignments on time and within budget SKILLS AND ABILITIES: Proven skills working with Phoenix configuration software Extensive knowledge of critical environment systems, specifically BSL3 Labs Proven analytical skills Exceptional interactive and communication skills Excellent troubleshooting skills Ability to work independently and unsupervised ACAD skills WORK ENVIRONMENT AND PHYSICAL DEMANDS: This position involves a mix of office-based work and regular visits to active project jobsites, which may account for up to 50% of working hours. Jobsites reflect typical construction and outdoor environments and require the use of personal protective equipment. The role includes consistent physical activity, often requiring extended periods on your feet. Candidates must be comfortable lifting up to 50 pounds occasionally and up to 20 pounds more frequently. Comfort with climbing ladders periodically is also necessary. The position may involve small, repetitive motions and the use of hand tools. COMPENSATION AND BENEFITS Annual base salary ranges from $68,000 - $124,000 depending on experience Benefits summary can be found at ATS-Benefits POSITION TYPE AND HOURS Full-time, exempt Typical Monday - Friday working hours with flexibility as needed Local travel required up to with occasional overnight trips CREDENTIALS AND EXPERIENCE 2+ years working directly with Phoenix Controls preferred Engineering undergraduate degree Equivalent combination of education and experience Computer programming experience Building Mechanical system experience Experience with electronics and basic electrical circuits ATS is an equal opportunity employer and we are committed to complying with all federal, state, and local laws providing equal employment opportunities. When making hiring and employment decisions, we do not discriminate based on race, color, national origin, ancestry, religion, sex, gender identity, sexual orientation, marital status, pregnancy, age, military service, military or veteran status, physical or mental disability, medical condition as defined under state and federal law, or any other legally protected category. All such discrimination is strictly prohibited. The above job description may not cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice.

Provide engineering and consulting services for a broad array of projects and clients. This may include performing and/or leading field investigations, engineering analysis, calculations, and recommendations, design and development of plans and specifications, observation and inspection, and the writing, preparation, and review of related reports for the services provided. Review drawings and construction to assure compliance with plans and specifications. Prepare proposals and cost estimates, track and evaluate project progress, budgets, and recommend changes. Research and resolve design and construction problems. Assign, review, and evaluate laboratory or field data for inclusion in reports. Apply sound engineering principles and be able to communicate complex engineering issues and concepts to technical and non-technical clients and project teams. Services may be provided for existing or proposed projects in the public works, transportation, commercial, communications, energy, and/or industrial sectors

Are you ready to lead with precision and tackle complex challenges? As a Field Engineer, you will be the driving force behind projects, providing technical engineering information to ensure construction work complies with all engineering standards, codes and contract specifications. Bring your diverse ideas to build stronger, more resilient communities. Apply now and transform your career with us. What you will be doing Meets daily with project crews to review production schedule and confirm all materials, equipment and resources are readily available for production to continue on schedule and within budget. Collects, coordinates and analyzes shop drawings, design specifications, material requirements and project data through the duration of the project to ensure quality and compliance. Provides technical input for project work plan and scheduling. Identifying risk elements of production, materials, equipment or processes that could negatively impact the budget or schedule. Evaluates daily production, schedule and budget projections to accurately track project performance. Documents daily activities in Company approved methods and technologies. Remits accurate project quantity input and controls using assigned project cost coding to ensure project financials are accurately reported. Manages cost coding with Company finance and accounting teams regarding employee time, materials, equipment and subcontractor needs. Reviews and approves daily timecards for all Company construction crews. Works with Office Manager, payroll and job construction supervisors to resolve timecard inquiries, as needed. Reviews project specifications for quality assurance at the beginning of work, during the project work and after work completes. Initiates and manages appropriate certificates, inspections and other documentation regarding construction production on the project site. Works with construction crews and engineering leaders to plan field layout on the project site, ensuring appropriate utility and commercial lines are marked before production begins. Initiates and manages any permits needed before work can begin. Assists the development of design drawings and provides technical input, as needed. Coordinates subcontractor work methods, schedule and crews as needed. What we are looking for Bachelor's Degree in a related field required. 1+ year experience preferred. Construction engineering experience or knowledge required. Beginner knowledge of construction equipment & techniques, drawing & specifications, building materials and required standards applicable to the project. Ability to assume responsibility, interface and communicate effectively with others. Why work for us Some of the benefits you may be eligible for as an employee are: Comprehensive compensation package and paid time off program Industry leading 401(k)/RRSP Medical/Extended Health Care, Dental, Vision and/or Provincial Medical Wellness benefits & Employee Assistance Program Tuition Reimbursement Program We are an EEO/ADA/Veterans employer. Salary Min USD $80,000.00/Yr. Salary Max USD $83,000.00/Yr. Vehicle Program Personal Vehicle Allowance Tier I: $750 USD/month

As a UW employee, you have a unique opportunity to change lives on our campuses, in our state, and around the world. UW employees offer their boundless energy, creative problem-solving skills, and dedication to building stronger minds and a healthier world. UW faculty and staff also enjoy outstanding benefits, professional growth opportunities, and unique resources in an environment noted for academic excellence, intellectual excitement, artistic pursuits, and natural beauty. **The Department:** The Ocean Physics Department (OPD) conducts seagoing research into the fundamental fluid dynamics of the ocean, including its interactions with the atmosphere and its role in the climate system. OPD also engages in research focused primarily on the study of small-scale to meso-scale oceanographic physical processes, the design and development of unique instruments for use in these studies, and the education of undergraduate and graduate students through instruction and employment. This position primarily supports the following programs in the Applied Physics Laboratory: (1) Operations and Maintenance of the Northwest Environmental Mooring program, operated and maintained as part of the Northwest Association of Networked Ocean Observing Systems (NANOOS), funded through the NOAA IOOS and Ocean Acidification Research programs, and the Washington Ocean Acidification Center. The purpose of the research projects is to provide reliable, long-term, real-time, high-quality oceanographic and atmospheric observations in support of 1) long-term studies to investigate ocean acidification, hypoxia, harmful algal blooms, and climate change within Washington waters, 2) rapid resource management decisions using real-time observations, and 3) Washington Coast and Salish Sea environmental modeling efforts. (2) Shelf Real-time Harmful Algal Blooms (HABs) mooring. Since 2016, APL has been working with other institutions to deploy a real-time HAB monitoring system seasonally on the Washington shelf to provide early warning of offshore toxic HABs and to inform HAB forecasts. This project is presently funded through the NOAA Marine Event Response to HABs (MERHAB) project. This position would work closely with both APL field engineers and NOAA Northwest Fisheries Science Center collaborators to prepare our primary instrument, the Environmental Sample Processor, for the twice-annual deployments. See Yourself at APL (******************************* as a member of the Ocean Physics Department! We are seeking a full-time Field Engineer 2 to join the team. This position has a salary range of $90,000 to $96,600 per year ($7,500 to $8,000 monthly), along with great employment benefits and competitive total compensation incentives. **The Position:** The Field Engineer 2 (FE2) will work as a technical lead and will function as a part of a team of research scientists and engineers to support long-term oceanographic observing systems, including 6 Puget Sound moorings, 2 offshore moorings, and a mooring in Bellingham Bay. Work will be performed in a laboratory environment and in the field aboard research vessels. The field engineer will lead regular maintenance on oceanographic instrumentation, laboratory, and field support systems. This includes maintaining safety standards, managing team schedules, planning multi-step system maintenance to meet team schedules, procurement of supplies, developing standard operating procedures and safety protocols, keeping asset and inventory records current, and documenting system operations. Other responsibilities include remote troubleshooting through data analysis, hands-on benchtop troubleshooting and repairs of electro-mechanical systems, and overseeing logistics and preparation for field operations. Field work for this position will include 1-day operations aboard small vessels up to multi-week research cruises on global-class research vessels. This field engineer will operate small boats, APL vehicles, forklifts, cranes, and overhead lift systems. The field engineer will be responsible for ensuring that safety standards are maintained in laboratory and field work settings. **Field Engineer 2 Responsibilities:** As a Field Engineer 2 in the Ocean Physics Department, your responsibilities will include: **Manage material and overall logistics related to service and refurbishment of ocean instrumentation and instrument platforms. Assist with research logistics, including transporting equipment to remote field locations, obtaining lodging, communications, and sourcing supplies. At the conclusion of each field experiment, manage the proper storage and inventory of equipment and supplies.** **Plan and lead testing and checkout of scientific oceanographic instruments. Identify problems with the research equipment or methods, and implement solutions. Attend regular team meetings and provide operational updates to the rest of the team.** **Participate in developing and constructing custom instrument systems, and oversee instrument platform integration, assembly, and testing. The FE2 will make independent decisions on minor system modifications, and will carry out system operations, repairs, maintenance, testing, and calibrations of equipment used in the Laboratory and the field.** **Plan and lead maintenance of laboratory and field equipment, including test tanks and small boat/trailer maintenance. Procure supplies, keeping asset and inventory records current, and documenting system operations. Develop standard operating procedures and safety protocols as needed.** **Maintain field and laboratory safety standards in all work environments, and assume responsibility for safe and effective operation of complex experimental equipment.** **At sea maintenance and installation efforts (aboard small boats and large research vessels). Assist in all aspects of field data collection, including small vessel operations, instrument calibration, data acquisition, and record keeping. May instruct, train, and supervise support staff on methods and procedures; Schedule and document the work of team members.** **General Requirements:** Bachelor's Degree or higher in Engineering, Sciences, or a closely related technical field. Equivalent experience can substitute for the degree requirement, AND at least 4 years of relevant work experience. - Able to work independently and as part of a research team, interacting cooperatively with people from diverse backgrounds, academic levels, and nationalities. - Experience with electromechanical system development, maintenance, and troubleshooting. - Independently determine and communicate about the kinds of tools and equipment needed to do a job. - Experience with standard electrical assembly and test equipment, including soldering, connector assembly, oscilloscope, and DMMs. - Strong organizational skills, and experience with inventory and/or maintenance management systems. - Experience with electrical communications protocols (serial, Ethernet). - Strong verbal and written communication skills. - Able to operate and perform maintenance tasks on small boats. - Experience with Linux OS and command-line computer operations. - Valid Driver's License. Equivalent education/experience will substitute for all minimum qualifications except when there are legal requirements, such as a license/certification/registration. **While not required, you'll stand out if you have:** + Database and data set handling and analysis experience. + Programming Experience (Python, MATLAB). + The willingness to complete a security background investigation. + Experience operating small boats. **About APL:** The Applied Physics Laboratory is a research unit at the University of Washington. Our research expertise is in ocean physics and engineering, ocean and medical acoustics and imaging, polar science, remote sensing, and signal processing. We conduct research and development that is sponsored by a variety of federal and state agencies and take great pride in our long-standing status as a US Navy-designated University Affiliated Research Center (UARC). Our work takes place not only on the University of Washington campus and medical centers, but in field locations around the world - at sea, in the air, and on polar ice caps. We apply rigorous scientific inquiry and engineering excellence in pursuit of solutions to important problems for the good of our region, nation, and world. We are focused on building and sustaining a laboratory where all students, staff, and collaborators can realize success. We believe every member of our team enriches our research enterprise by exposing us to a broad range of ways to understand and engage with the world, identify challenges, and discover, design, and deliver solutions. We invite you to explore our laboratory, to find answers to Common Questions (************************************************ about the University's application process, and to See Yourself at APL (******************************* . **About the University of Washington's Application Process:** The application process may include completion of a variety of online assessments to obtain additional information that will be used in the evaluation process. These assessments may include Work Authorization, Cover Letter and/or others. Any assessments that you need to complete will appear on your screen as soon as you select "Apply to this position". Once you begin an assessment, it must be completed at that time; if you do not complete the assessment, you will be prompted to do so the next time you access your "My Jobs" page. If you select to take it later, it will appear on your "My Jobs" page to take when you are ready. Please note that your application will not be reviewed, and you will not be considered for this position until all required assessments have been completed. **Compensation, Benefits and Position Details** **Pay Range Minimum:** $90,000.00 annual **Pay Range Maximum:** $96,000.00 annual **Other Compensation:** - **Benefits:** For information about benefits for this position, visit ****************************************************** **Shift:** First Shift (United States of America) **Temporary or Regular?** This is a regular position **FTE (Full-Time Equivalent):** 100.00% **Union/Bargaining Unit:** Not Applicable **About the UW** Working at the University of Washington provides a unique opportunity to change lives - on our campuses, in our state and around the world. UW employees bring their boundless energy, creative problem-solving skills and dedication to building stronger minds and a healthier world. In return, they enjoy outstanding benefits, opportunities for professional growth and the chance to work in an environment known for its diversity, intellectual excitement, artistic pursuits and natural beauty. **Our Commitment** The University of Washington is committed to fostering an inclusive, respectful and welcoming community for all. As an equal opportunity employer, the University considers applicants for employment without regard to race, color, creed, religion, national origin, citizenship, sex, pregnancy, age, marital status, sexual orientation, gender identity or expression, genetic information, disability, or veteran status consistent with UW Executive Order No. 81 (*********************************************************************************************************************** . To request disability accommodation in the application process, contact the Disability Services Office at ************ or ********** . Applicants considered for this position will be required to disclose if they are the subject of any substantiated findings or current investigations related to sexual misconduct at their current employment and past employment. Disclosure is required under Washington state law (********************************************************* . University of Washington is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, religion, color, national origin, sexual orientation, gender identity, sex, age, protected veteran or disabled status, or genetic information.

Endurance Energy | Seattle, WA Endurance is developing modular seafloor geothermal power plants that harness the vast thermal energy beneath the ocean floor to provide gigawatts of clean, reliable energy. We're addressing the critical power bottleneck facing AI infrastructure development while creating a path toward energy independence and decarbonization across the globe. Backed by premier venture capital firms including First Round Capital and Point72 Ventures, our exceptional founding team includes veterans from SpaceX (Dragon and Starship programs) and Neuralink, with specialized expertise in complex thermal and fluid systems. We're seeking a talented Thermal and Fluids Systems Engineer to join our team at our headquarters in Seattle, where you'll help design and develop the core power cycle for our revolutionary seafloor generators. The Role As a Founding Thermal and Fluids Systems Engineer at Endurance, you'll be a key early member of our team, building the power generation cycle at the heart of our subsea geothermal power plants. You will rapidly design, test, and optimize the components of a compact power cycle, playing a pivotal role in bringing this novel energy system from concept to reality. This role focuses primarily on systems engineering and the integration of proven components into robust, field-ready systems, but also requires the flexibility, creativity, and entrepreneurial mindset essential to an early-stage startup. You'll work across multiple technical domains and help shape the foundation of our energy systems as the company scales. Your first major project will be the design, build, and testing of a 100kWe compact power cycle at our site in Seattle. This full-scale loop will validate the performance and reliability of our core power generation technology in a controlled land-based environment before it is packaged for subsea deployment. Key Responsibilities Lead the thermal-fluid design of new power cycle architectures and components including turbines, heat exchangers, pumps, condensers, and piping systems. Assemble, operate and validate a 100kw scale thermodynamic power cycle test loop Design and build test rigs for component and system testing. Carry out detailed analysis and component optimization using numerical simulation tools. Support the design of other mission critical systems such as geothermal and hydrothermal heat exchangers and deep sea vehicles. Support business development activities including supplier meetings, technical presentations, and customer interactions Help establish system engineering and modelling tools, processes, and documentation for future team growth Qualifications Bachelor's degree in mechanical or aerospace engineering or related engineering discipline (preferably with a masters) 3+ years of experience in thermal and fluid systems modeling and/or design. Experience designing, building, testing, and deploying test rigs for system validation. Ability to act and execute in a scrappy and entrepreneurial manner Strong problem-solving skills and attention to detail Excellent communication and teamwork abilities Preferred Skills Strong background in the design and analysis of thermal-fluid systems Experience designing turbomachinery -pumps, compressors or turbines. Proficiency in developing low-order modeling tools for system sizing, trade studies, and rapid design iteration including transient system modeling Skilled in CFD and numerical simulation tools for fluid flow and heat transfer analysis (e.g., ANSYS Fluent, OpenFOAM) Hands-on experience setting up, instrumenting, and operating experimental test rigs and facilities Familiarity with basic mechanical design and manufacturing processes including CAD-based design and prototyping Bonus - Experience in either marine systems, power generation, geothermal energy or supercritical fluids Benefits & Perks Global Fieldwork: Travel to fascinating deployment sites along oceanic ridges in locations like the Pacific Northwest, Hawaii, Iceland, Japan, New Zealand, and the Azores Hands-on Experience: Participate in sea trials and deployment operations in partnership with leading oceanographic institutions Cutting-Edge Development: Work with technology that spans high-power electronics, marine systems, and clean energy Impact-Driven Work: Help solve one of the world's most pressing challenges - clean, reliable power generation Competitive Compensation: Comprehensive salary and equity packages Benefits: Vision, Dental, Health insurance coverage Dive Certification: Company-sponsored recreational dive certification PTO: Unlimited (with advanced notice) This role has a compensation range of $150,000 -$200,000 base salary. Endurance is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Contact: ***************************

SGS is the global leader and innovator in inspection, verification, testing and certification services. Founded in 1878, SGS is recognized as the global benchmark in quality and integrity. With over 97,000 employees in 130 countries and operating a network of more than 2,400 offices and laboratories, we provide services to almost every industry by assuring quality and safety of products and services. Trusted all over the world, SGS is a market leader because we put 100% passion, pride and innovation into everything we do. We encourage new ideas. We welcome people who challenge the way we do things. And we will be 100% committed to helping you reach your full potential. ArcLight Wireless is a world-class provider of RF systems engineering, network services, and technical expertise for the cutting-edge companies in the wireless industry. We offer field test services, custom software verification, and carrier technical account management to provide intelligent solutions to our clients' issues. We are a flexible organization that can adapt to changing needs. Role Description This is a full-time on-site role for a QA Engineer I located in the Seattle, WA market. This role is for a Field Tester, meaning your assignments may vary each day based on test location and assigned testing which will be executed at either stationary or mobility test locations. The QA Engineer III will be responsible for test execution, quality assurance, manual testing, software testing, and post-processing logs. Also, they will be in charge of other duties such as maintaining inventory (check in/out procedures while maintain security protocols), shipments to/from office location, some travel if/when required and sending daily reports. Qualifications Qualifications * Strong analytical and problem-solving skills * Excellent communication and collaboration skills * Excellent word and excel skills * Bachelor's degree in Computer Science, Engineering, or related field * Experience with mobile device testing is a plus * Experience with automation testing tools is a plus * Basic understanding of 3G, 4G, 5G network technology Preferred Qualifications * Experience in test execution, quality assurance, manual testing and software testing, modem, network and application log analysis * Experience with MediaTek, Samsung, and Qualcomm Chipsets * Experience in creating detailed technical reports * Basic knowledge of python, ability to read and understand code with the intention of making minor configuration changes to scripts * Some basic knowledge of visual basic and creating excel macros * Experience with PowerBi or other tool for creating reports from CSV or DB * Basic knowledge of DB architecture and how to formulate SQL query * Strong familiarity with 5G Data Performance KPIs and Call Performance KPIs * Basic understanding of e911 procedure and LPP * Experience troubleshooting network and device side issues. * Familiar with JIRA systems * Familiar with writing defect reports and providing excellent communication to the customer. * IMS protocol understanding Pay Range: $60,000-$75,000/ year Additional Information Benefits * Competitive salary. * Comprehensive health, dental, and vision insurance for full time employees. * Retirement savings plan. * Continuous professional development and training opportunities. * A dynamic, collaborative work environment. * Access to cutting-edge cryptographic technology and tools. Physical Demands of the Job * Stand: Occasionally * Move or traverse: Frequently * Sit: Constantly * Use hands: Constantly * Reach with hands and arms: Occasionally * Climb or balance: Occasionally * Stoop, kneel, crouch or crawl: Occasionally * Talk/hear: Constantly * Taste/Smell: Occasionally * Lift/carry/push or pull: Occasionally 30 lbs Additional information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a callback. Please note, this phone number is not for general employment information but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Pay Range: $35 ~ $40/hour (DOE) The role of this position encompasses a wide scope of activities and initiatives that will bring solutions to complex applications problems, system administration issues or network concerns. Network Engineers will work with mobile devices testing the latest features in the technology and /or telecommunication available on the market. The testing scope includes connectivity test, field test, and others as required. The position requires the Network Engineer to perform systems management and integration functions involving engineering work on cellular, wireless devices and systems. Essential Functions: Verify stability and portability of networks and software. Communicate project information through technical reports. Perform ongoing hardware and software maintenance operations, including installing or upgrading hardware or software. Provide technical guidance or support for the development or troubleshooting of systems. Work on lab testing on 3GPP standards based on cellular system such as GSM, EDGE, WCDMA, HSPA, LTE and 5G. The testing conducts various types of mobility and stationary RF test cases in the lab of 5G, LTE, WCDMA, UMTS, and GSM Research, test, monitor or verify proper functioning of software patches. Analyze and determine issues; check the similar/same issue history, design test plan (location, models, basic parameters, considerations, etc.), lab test and/or lab test, set test environment and parameters regarding network circumstance. Capture all the requested and required logs and analyzing them; determine what the log shows, confirm whether the issue is cleared or remained, professional reports, and communicate with R&D or/and QA team. Perform testing and engineering services in both stationery and mobility conditions as in needed. May require supporting carrier Field testing by project needs and other duties as assigned. May require weekend/holiday work depending on assigned. Must be flexible and able to work extended hours as needed to support testing and client needs. Travel up to 30% Education and Technology Skill Requirements: Bachelor's Degree Preferred in Electronics, Software Engineering Communication, Computer Network Engineering, Computer Science, Electrical Engineering or Telecommunications General understanding for telecommunication knowledge and Android platform device Analytical, Scientific, Data Mining and Database management software Access software, cloud-based management software, communications server software Strong knowledge of 5G, LTE, HSPA+/WCDMA including PHY/MAC, signaling, call processing concepts and upper layers. Good understanding on GSM, GPRS, EDGE, WCDMA, CDMA, HSPA, LTE, 5G, Wi-Fi, Bluetooth, GPS, mobile phone software architecture and telecommunication network configuration Experience in analyzing logs, troubleshooting issues from lab for UMTS/GSM CS, PS calls, LTE and 5G Data calls, metric test is plus. Experience with specific logging/analysis tools such as QXDM, QPST, XCAL, XCAP Experience in tracing and debugging using tools to fully analyze protocol stack related issues in appropriate 3GPP specifications. Experience with Transport Layer protocols such as TCP, UDP, and analysis tools such as Wireshark. Some programming skills in Python, Java and Perl script is desired. Proficient with MS Office (Outlook, Excel, Word, Power Point) is essential for creating the test reports. Understanding of TCP/UDP, IP Packet, OSI Protocol Model Solid understanding of SW testing techniques and methodologies Internet browser and Internet protocol IP multimedia subsystem software Transaction security and virus protection software; Network monitoring software

Job Description Pacific Office Automation (POA) is the largest independently owned office technology dealer in the United States. Since 1976, we've expanded to 30+ branches across 11 western states-including Oregon, Washington, California, Arizona, New Mexico, Nevada, Utah, Idaho, Colorado, Texas, and Hawaii. We partner with leading manufacturers like Canon, Konica Minolta, Sharp, HP, Ricoh, and Lexmark, delivering cutting-edge business solutions with unbeatable customer service. At Pacific Office Automation, you will find an amazing technology company full of growth opportunities, great benefits, and passionate coworkers who aim to help you succeed. Among our company goals, we aim to be a long-term employer. That means providing employees with the training and certification they need to keep up with the fast-changing technology of our office machines, devices, and software. At POA, we believe that all voices can and should be heard, regardless of seniority or tenure. Position We are currently seeking a Network Technician with a passion for technology at our branch in Seattle,WA. Our ideal candidate will be energetic, have experience with problem-solving, and have the ability to meet urgent deadlines while maintaining accuracy. Essential Job Duties Connecting/installing office equipment to our customer's network Set-up printing, scanning, scanning to e-mail, scanning to FTP, etc. Ensuring customer satisfaction Remote troubleshooting and diagnosis of network connectivity issues Qualifications Professional networking Net + Good understanding of Windows Server environments (SBS,2008 R2 & 2012R2) Advanced knowledge of networking protocols and concepts (Routing, Ports, TCP/IP, Network analysis tools) Knowledge and hands-on experience providing support to users using Windows 7, Windows 8, Windows 10, and other mainstream Microsoft applications Proficient with all Apple products Strong communication skills and ability to work cohesively with clients Ability to travel locally to different clients Benefits Advancement and growth into leadership roles Team-player environment DOE: $22-24/ HR Medical/Dental/Vision/Life insurance plans Matched 401k PTO, Vacation, Sick Leave FSA/HSA programs Company car for work and personal use Our Commitment to Diversity and Inclusion Pacific Office Automation is proud to be an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, national origin, ancestry, gender, sexual orientation, gender expression or identity, age, religion, veteran status, or any other characteristic protected by law. We celebrate our employees' differences because we know that diversity makes us stronger. #LI-Onsite

At Stoke, we believe that a thriving space economy leads to a vibrant, sustainable, and equitable future here on Earth. That is why we are building our fully and rapidly reusable vehicle, Nova. It is designed to fly daily and solve the core challenges of space transportation - it reduces cost, increases availability, and enhances reliability. By radically lowering the cost and increasing the cadence of launch, we're able to create a truly scalable space industry. Our team is mission-driven, collaborative, and empowered with ownership of their work. If you want to work with some of the most dedicated and talented people on Earth, come join us. Description Stoke's Stage Fluids team is developing a reusable LNG/LOX first stage and reusable LH2/LOX second stage for our launch vehicle, Nova. As a Fluids Engineer, you will be responsible for defining, designing, manufacturing, and testing various fluids systems across the rocket. You will be owner of the entire process for your designs, from early concepting and architecture trades, to creating models in CAD and completing analysis, to procuring parts with suppliers and integrating them onto the vehicle. As part of a small, well-supported team, you will have access to the resources you need to get the job done right while simultaneously boosting your skills at a pace that can't be matched in most other roles. You must be ready to stay focused, move fast, self-direct, and learn on the fly. Responsibilities Collect design requirements from multidisciplinary teams, and use these to create concepts for fluids systems Lead architecture trades for major fluids systems, rapidly transform these decisions into real-life hardware implementations Develop fluids system concept of operations for ground, flight, and recovery phases of vehicle's life Perform gas and liquid fluids system sizing analysis (incompressible and compressible flow) Design and analyze launch vehicle tubing, manifold, and mounting systems, ensure these systems are structurally capable of surviving vehicle load cases. Create CAD models and drawings Coordinate directly with suppliers to procure parts Coordinate and execute the manufacturing and integration of fluids systems Incorporate design for manufacturing best practices into designs to improve production efficiency Coordinate and execute development and qualification testing of fluids systems Define and manage the schedule and budget for your fluids systems Qualifications 2+ years of experience in design, build, and/or testing of rocket fluids systems, rocket engines, and valves Exceptional command of fundamentals, including compressible flow, thermodynamics, structures, control systems, cryogenics, and instrumentation Strong knowledge with data analysis and data processing Extensive experience with CAD tools and configuration management (Siemens NX and Teamcenter preferred) Proficiency with understanding and maintaining revision-controlled P&ID's Proficiency with aerospace standard fasteners, seals, tubing, fittings, and commercial off the shelf hardware Proficiency with instrumentation including pressure transducers, thermocouples, accelerometers, and flow meters Proficiency with fluid analysis tools (Siemens AMESim, Thermal Desktop, Python, EES, REFPROP, Excel, Matlab, or equivalent) Proficiency in GD&T, tolerance stackups, and material selection Hands on experience performing fabrication and assembly of components Excellent written and verbal communication Bachelor's degree in mechanical or aerospace engineering, or similar Willing to relocate to Seattle, WA Benefits Equity - We are pleased to offer equity in the form of stock options to all regular, full-time employees. Comprehensive benefits program including subsidized medical, dental, and vision insurance Company-paid life and disability insurance 401(k) plan with employer match 4 weeks' Paid Time Off Holidays - 10 days (including an end-of-year closure) Paid Family/Parental Leave On-site gym or monthly wellness stipend (depending on location) Dog friendly offices! Compensation Target Levels: Level 1 Range: $91,000 - $114,900 Level 2 Range: $104,500 - $141,400 Our job posts are intentionally written to attract a wide variety of experience levels, and we make decisions about the right fit on a per-candidate basis. Your actual level and base salary will be decided based on your specific experience and skill level. ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Equal Opportunity The Company is an Equal Opportunity Employer, including with respect to disability and veteran status. It is committed to compliance with all equal opportunity laws, including the Immigration and Nationality Act (INA) and Title VII. It does not discriminate on the basis of nationality, race, citizenship, immigration status, or any other protected class when it comes to employment practices, including hiring. Employment at the Company is contingent upon satisfactory completion of reference and background checks, and on your ability to prove your identity and authorization to work in the U.S. for the Company. Employees must comply with the United States Citizenship and Immigration Services employment verification requirements, and, therefore, they must complete an Employment Eligibility Verification Form I-9 at the start of employment and re-verify authorization to work periodically. Separate from this I-9 process, this position entails access to certain technology and technical data that is restricted under U.S. export control laws and regulations. Employment or continued employment may be conditioned on your legal authorization to work with or have access to export control materials as necessary to perform your job. E-Verify Stoke Space uses E-Verify to confirm the identity and employment eligibility of all new hires.

Who We Are Coughlin Porter Lundeen is a civil and structural engineering firm. Focused in the Pacific Northwest, we partner with clients across markets to bring unique project visions to life. We were founded with the goal of exceeding the standards and services provided by engineering firms. And today, almost 30 years later, that vision continues to guide all that we do. Our core values are the heart of who we are and guide how we work each day. Commitment to Quality, every drawing, every detail. Creativity, from project solutions to the way we define our roles. A “Client-First” Mindset, cultivating long-term partnerships. An Empowered Team, continued learning and development. Collaboration and Respect, with our clients and within our own professional work environment. Community, supporting the causes most important to our staff and city. Description Coughlin Porter Lundeen is seeking a structural staff engineer; this position involves the design and preparation of construction documents on diverse project types including a variety of building materials. As an integral member of the design process, structural engineers are challenged to develop project management skills, lead in-house design teams, and work firsthand with a diverse range of clients. Engineers are involved with every aspect of the project from design through construction. This position requires sound technical skills, strong communication skills, and a professional attitude. Required Qualifications BSCE or MSCE degree (MSCE Preferred) 0-4 years structural design experience Licensure: Minimum EIT required and in process to get P.E. Requires effective interpersonal, communication, and presentation skills. Must have initiative, be resourceful, and able to work independently. Must be able to effectively prioritize, manage time and projects, and multi-task in a demanding, fast-paced environment. Works effectively as an individual or as part of a project team. Requires fluency in English with strong verbal and written skills. Must be able to effectively collaborate with all levels of management, staff, and clients in diverse environments. Must be proficient in the MS Office Suite of software. Adherence to our core values. Ability to drive locally and travel domestically as needed. Physical Requirements Ability to drive as needed to client project locations (primarily in the greater Seattle area). Able to travel by airplane domestically as needed for client projects (outside the greater Seattle area), campus recruiting, conferences, etc. Requires sitting for extended periods of time at a computer, keying and reading content. Will be required to stand, reach, bend, twist, squat, and move about freely in an office environment. May need to be able to lift up to 25 lbs. Able to use office equipment such as phone, copier, printer, etc. Benefits and Compensation $80,000-90,000 per year (depending on experience and qualifications) Additional compensation for hours worked in excess of 40 hours weekly (paid quarterly) Medical (HSA with employer contributions), dental and vision Company paid life and AD&D insurance Company funded ORCA card PTO (15 days starting) 8 paid national holidays (including 1 floating holiday) 401(k) matching Annual bonuses and profit sharing (at company discretion) Monthly health and wellness stipend Employee assistance program Additional information regarding our workplace and benefits can be found here.