Field engineer jobs in Clarkstown, NY - 181 jobs

Expected Salary range is $80,000.00 - $110,000.00 depending upon experience *** ***Applicants must be eligible to work in the United States without visa sponsorship now or in the future*** Frontier-Kemper, a Tutor Perini Company, is seeking a Field Engineer (Entry-Level) to join our Kensico-Eastview Connection Tunnel Project in White Plains, New York. About Frontier-Kemper Excellence in Underground and Heavy Civil Construction At Frontier-Kemper, we specialize in heavy civil construction and underground mine development. We are known for our expertise in engineering and construction of deep shafts and tunnels of all sizes and complexity. Our goal is to be the industry's best source, and best value, for complete turn-key construction, engineering and design-build services and related products. Frontier-Kemper Constructors is the general contractor for the Kensico-Eastview Connection Tunnel Project. The scope of the approximately $1.1 billion contract entails the construction of a new deep rock tunnel between the Kensico Reservoir and the Catskill/Delaware Ultraviolet (CDUV) Light Disinfection Facility, both in Westchester County, New York. The new tunnel will provide an additional means of conveying water between the Kensico Reservoir and the CDUV Facility, enhancing operational resiliency and redundancy for New York City's water supply system. Extraordinary Projects need Exceptional Talent DESCRIPTION: As a Field Engineer (Entry-Level) at Frontier-Kemper, reporting to the General Superintendent, you will have the opportunity to: Review project plans and develops a construction schedule in coordination with project-wide activities. Coordinate with subcontractors on advance material acquisitions and pre-construction deliverables Develop and assist with obtaining quotes and draft contracts to meet project requirements. Prepare construction work plan packages and coordinate pre-construction meetings while ensuring that all prerequisites to start construction activities are identified and completed. Prepare, update, and distribute work activity schedules/updates, and communicates across discipline groups and agencies to ensure proper advance notifications and coordination of start times. Monitor and participate daily in field construction process. Provides layout checks and technical reviews of work against requirements. Obtains confirmations from design engineer as needed Assist with subcontract administration and permanent material suppliers through monitoring of correspondence, submittals, RFI's, and performance records; Maintains accurate payment records. Assist in preparing monthly reporting for progress payments, schedule updates, and problem/issue tracking and resolution. Provides accurate and factual assessments of project performance. Participate in change orders and claims management Identify and resolves changing site conditions or other impacts during planning of the work Develop quality checks and coordinate permits from appropriate entities Manage and submit project close-out in coordination with the client and third parties REQUIREMENTS: Bachelor's Degree in Civil Engineering or Construction Management or similar, from an accredited institution Heavy Civil construction experience preferred Experience with AutoCAD Knowledge of construction safety and current federal & OSHA Requirements. Project controls techniques (i.e. cost accounting, basic estimating, forecasting, and contracts) A strong working knowledge of the critical path method and resource scheduling. Working knowledge and experience with Microsoft Office and Primavera P6. Strong organizational and time management skills. Strong written and verbal communication skills. Good attention to detail, with the ability to recognize discrepancies. Strong work ethic - Highly motivated and willing to do what it takes to get the job done right. The ability to work independently as well as part of a team. Frontier-Kemper builds extraordinary projects, and we need exceptional talent. Join us and together we will build the future. Equal Opportunity Employer

Expected Salary range is $80,000.00 - $110,000.00 depending upon experience ***_** *****Applicants must be eligible to work in the United States without visa sponsorship now or in the future***** Frontier-Kemper, a Tutor Perini Company, is seeking a **Field Engineer (Entry-Level)** to join our Kensico-Eastview Connection Tunnel Project in **White Plains, New York.** **About Frontier-Kemper** **_Excellence in Underground and Heavy Civil Construction_** At Frontier-Kemper, we specialize in heavy civil construction and underground mine development. We are known for our expertise in engineering and construction of deep shafts and tunnels of all sizes and complexity. Our goal is to be the industry's best source, and best value, for complete turn-key construction, engineering and design-build services and related products. Frontier-Kemper Constructors is the general contractor for the Kensico-Eastview Connection Tunnel Project. The scope of the approximately $1.1 billion contract entails the construction of a new deep rock tunnel between the Kensico Reservoir and the Catskill/Delaware Ultraviolet (CDUV) Light Disinfection Facility, both in Westchester County, New York. The new tunnel will provide an additional means of conveying water between the Kensico Reservoir and the CDUV Facility, enhancing operational resiliency and redundancy for New York City's water supply system. **_Extraordinary Projects need Exceptional Talent_** **DESCRIPTION:** As a **Field Engineer (Entry-Level)** at Frontier-Kemper, reporting to the **General Superintendent** **,** you will have the opportunity to: + Review project plans and develops a construction schedule in coordination with project-wide activities. + Coordinate with subcontractors on advance material acquisitions and pre-construction deliverables + Develop and assist with obtaining quotes and draft contracts to meet project requirements. + Prepare construction work plan packages and coordinate pre-construction meetings while ensuring that all prerequisites to start construction activities are identified and completed. + Prepare, update, and distribute work activity schedules/updates, and communicates across discipline groups and agencies to ensure proper advance notifications and coordination of start times. + Monitor and participate daily in field construction process. Provides layout checks and technical reviews of work against requirements. Obtains confirmations from design engineer as needed + Assist with subcontract administration and permanent material suppliers through monitoring of correspondence, submittals, RFI's, and performance records; Maintains accurate payment records. + Assist in preparing monthly reporting for progress payments, schedule updates, and problem/issue tracking and resolution. Provides accurate and factual assessments of project performance. + Participate in change orders and claims management + Identify and resolves changing site conditions or other impacts during planning of the work + Develop quality checks and coordinate permits from appropriate entities + Manage and submit project close-out in coordination with the client and third parties **REQUIREMENTS:** + Bachelor's Degree in Civil Engineering or Construction Management or similar, from an accredited institution + Heavy Civil construction experience preferred + Experience with AutoCAD + Knowledge of construction safety and current federal & OSHA Requirements. + Project controls techniques (i.e. cost accounting, basic estimating, forecasting, and contracts) + A strong working knowledge of the critical path method and resource scheduling. + Working knowledge and experience with Microsoft Office and Primavera P6. + Strong organizational and time management skills. + Strong written and verbal communication skills. + Good attention to detail, with the ability to recognize discrepancies. + Strong work ethic - Highly motivated and willing to do what it takes to get the job done right. + The ability to work independently as well as part of a team. **_Frontier-Kemper builds extraordinary projects, and we need exceptional talent. Join us and together we will build the future._** **Equal Opportunity Employer**

RESPONSIBILITIES Coordinate and develop the equipment maintenance program for the project Assist management with final equipment budgets and potential equipment purchases in order to meet budgetary goals Overall supervisory responsibility for planning, coordinating and reviewing all operation of maintenance for the TBM Prepare, submit, review and modify/update procedures, method statements, shop drawings, etc. Implement procedures, method statements, shop drawings and overseeing remedial measures when specified limits are approached or exceeded Maintain working knowledge of applicable codes and standards for a project Protect facilities, and other elements of the tunnel works including operations in the TBM launching and receiving shafts and surface, to ensure safety, quality, conformance with the contract documents, timely completion of the works, and the keeping of accurate records of all work as required herein Enforce site safety at all times Coordinate with other TBM production Engineer and TBM Tunnel Superintendents QUALIFICATIONS Required Bachelor's degree from an accredited institution Minimum 5 years' experience in TBM (Tunnel Boring Machine) construction Preferred Bachelor's degree in civil or mechanical engineering Project experience with a Slurry TBM

Job Description Supervise construction crews made up of Laborers, Operators and/or Carpenters in civil structural construction projects as assigned. Work with regulating agencies, job superintendents, foreman, subcontractors and others internally and externally. Responsibilities: Oversees the Forman that supervise a crew of employees and prioritizes work. Reads and follows plans, material lists and guidelines and applies necessary timelines. Conducts regular safety talks/meetings. Fulfills all regular and advanced construction duties, including project layout, and completes required paperwork in a timely manner. Organizes, supervises, leads and trains employees to complete projects within established guidelines and timeframe. Enforces all company safety policies and procedures. Enforces all client-required safety policies and procedures. Complies with all company policies and procedures and safety requirements, including crewmember discipline and documentation. Submits crewmembers' timesheets into payroll by deadline. Works with Union halls to conform to the company EEO standards. Attends operation meetings as required. Supports Project Manager in all efforts during construction through completion of project. Other duties as assigned Supervisory Responsibilities: Directly supervises employees and carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring and training employees; planning, assigning and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Education and Skills: The successful candidate must be able to demonstrate outstanding capabilities in: Ability to work in a fast-paced team oriented professional work environment and field operations. Must be flexible and have the ability to prioritize a diverse workload. Detail oriented. Working knowledge of construction. College degree in Civil Engineering or equivalent a plus. IEW Construction Group is an equal opportunity employer. Job Posted by ApplicantPro

Full-time | Professional Locations: Clifton Park, Cohoes, East Syracuse, Monroe, New Windsor, Poughkeepsie, Staten Island, Syracuse, Wappingers Falls, NY Why Join Rezolut? At Rezolut, we're redefining diagnostic imaging services across the Northeast. We focus on delivering exceptional Mammography care, leveraging advanced technology and a patient-first mindset. If you are a GE or Hologic Mammography expert looking for hands-on work, career growth, and the ability to make a real impact, this is your opportunity.What You'll Do Lead service, maintenance, and repair of GE and Hologic Mammography systems, ensuring the highest standards of performance. Perform preventive maintenance, calibrations, quality control (QC), and quality assurance (QA) according to OEM specifications. Troubleshoot complex mechanical, electromechanical, and electronic issues on Mammography equipment. Maintain accurate service records and communicate effectively with customers, ensuring rapid resolution of issues. Collaborate with team members while operating independently in the field. Travel regularly to customer sites throughout the Northeast. What We're Looking For Strong hands-on experience servicing GE and Hologic Mammography equipment (minimum 2+ years). Associate's degree, OEM Radiology, Electrical, or Technology training preferred. Proficient with computer tools (MS Word, Excel, PowerPoint, Outlook). Excellent problem-solving, analytical, and communication skills. Self-motivated, adaptable, and able to thrive in a fast-paced environment. Valid driver's license with a clean record. Nice to Have Experience with other imaging modalities (Ultrasound, MRI, CT, X-ray) and OEM brands such as GE and Hologic. Customer-focused service experience in a healthcare environment. What We Offer PTO accrual from day one (Full-Time) 6 Observed Holidays Medical, Dental, Vision, Life, and voluntary insurance options 401(k) Retirement Plan Employee Assistance Program Join us and be a key part of a team that delivers excellence in Mammography imaging across the Northeast.

One of the East Coast's leaders in Low Voltage and Security Technology solutions continues to grow, and has an opening for a Senior Field Engineer to support customer's systems throughout the Tri-State region. This organization has been designing, installing, and supporting safety and communications solutions for hundreds of our customers in the education, government, and business sectors for the past 30 years, and is a forever home for the right individual. Truly a 1/1 opening with a company that is completing multiple acquisitions to almost double in size, with the growth and future opportunities that come along with it. Overview: Lead integration, troubleshooting, configuration, problem solving, training, customer meetings and site surveys and system testing Access Control, CCTV, mass notification, paging, cloud-based security and Low Voltage systems Deployment, troubleshooting and final system commissioning of Networks and IT systems Mostly N NJ focus, with occasional travel outside of local area - NO NYC Full benefits and company perks Blend of autonomous and teamwork-style day to day Reach out if you'd like to learn more about this role or others in the local market! ************************* ************

Job Description JOB TITLE: Field Engineering Technician TYPE: Full time, regular COMPENSATION: $29.00/hr - $36.00/hr Clarapath is a medical robotics company based in Westchester County, NY. Our mission is to transform and modernize laboratory workflows with the goal of improving patient care, decreasing costs, and enhancing the quality and consistency of laboratory processes. SectionStar™ by Clarapath is a ground-breaking electro-mechanical system designed to elevate and automate the workflow in histology laboratories and provide pathologists with the tissue samples they need to make the most accurate diagnoses. Through the use of innovative technology, data, and precision analytics, Clarapath is paving the way for a new era of laboratory medicine. Role Summary: The Field Engineering Technician will play a critical role in supporting the installation, operation, and service of Clarapath's SectionStar™, our advanced electro-mechanical device, at customer sites. This position requires strong technical aptitude, hands-on troubleshooting skills, and the ability to work independently in dynamic field environments. Working closely with our engineering, manufacturing, and customer support teams, this individual will ensure successful deployments, perform on-site diagnostics and repairs, and provide valuable feedback to improve product performance and reliability. We are seeking a proactive, detail-oriented technician who thrives in fast-paced settings, communicates effectively with customers, and is eager to apply problem-solving skills to real-world technical challenges. Responsibilities: Install, configure, and commission SectionStar™ units at customer sites Perform on-site diagnostics, troubleshooting, and repair of electro-mechanical and control-system components Use software tools to diagnose issues, identify root causes, and support machines deployed in the field Conduct preventive maintenance and routine system health checks Accurately document service activities, maintenance findings, and corrective actions Collaborate cross-functionally with engineering, manufacturing, and customer support teams to communicate field issues and recommend product improvements Support beta testing, validation activities, and field deployment of product updates Maintain a high level of professionalism and clear customer communication while representing Clarapath Ensure compliance with safety protocols, quality standards, and applicable regulatory requirements Qualifications: Associate degree or technical certification in engineering technology, electronics, mechanical systems, or a related field (Bachelor's degree preferred) 2+ years of experience in field service, technical support, electro-mechanical equipment maintenance, or a related role Strong troubleshooting skills across mechanical assemblies, electrical systems, sensors, and control hardware Experience diagnosing basic electrical issues using multimeters Hands-on experience with wire crimping and cable assembly Ability to read and interpret schematics, wiring diagrams, and mechanical drawings Comfortable working with software tools and command-line interfaces with training and guidance from the software team Ability to work with small electro-mechanical components in tight spaces; steady hands required Competency in handling warehouse equipment such as hand trucks and electric stackers Excellent communication skills, strong customer-service orientation, and attention to documentation detail Ability to travel frequently to customer sites (up to ~50% -75%) Ability to lift and maneuver equipment as required for installation and service tasks Familiarity with laboratory or medical devices, a plus Company Offers: Competitive salary will be commensurate with experience and education Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays) A collaborative and diverse work environment where our teams thrive on solving complex challenges Ability to file IP with the company Connections with world class researchers and their laboratories Collaboration with strategic leaders in healthcare and pharmaceutical world A mission driven organization where every team member will be responsible for changing the standards of delivering healthcare Clarapath is proud to be an equal opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. In addition to federal law requirements, Clarapath complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Fleet Engineer The Fleet Engineer supports the Assistant Port Engineer in the maintenance, repair, and regulatory compliance of all American Cruise Lines' (ACL) certificated vessels and launches. The Fleet Engineer provides immediate response for critical repairs to the portion of the ACL fleet assigned, to ensure the vessels remains safe and on schedule. The Fleet Engineer must be familiar with all vessel machinery, equipment and systems. This individual is responsible for following established safety practices while performing assigned duties to protect self, workers, and the public from personal injury and to prevent damage to ACL's property and the environment. This position reports directly to the regional Assistant Port Engineer. At American Cruise Lines, we are driven by our values-Optimism, Commitment, Patriotism, and Merit. These values shape our culture, our service, and our people, guiding us as we work together to Share America's Story on the Finest American Ships. Responsibilities: Take supervision and direction from the Assistant Port Engineer and Port Engineer. Provides support and coverage to Assistant Port Engineers. Identifies and troubleshoots technical vessel problems and provides fast solutions to minimize downtime. Expedites vendors for critical repairs. Coordinates and communicates with Marine Operations for critical repairs and determines a timeline for resolution. Manages warranties and coordinates extended warranties for technical equipment. Ensures competitive bidding and negotiates costs on purchases. Manages expenses and assists with the annual winter maintenance budget. Maintains responsibility for record keeping, including machinery history, parts inventory and reporting data to the Assistant Port Engineer. Coordinates large scale projects such as ship refits and dry dockings. Visits each ship at least three times a month. One of these visits shall include a full ship condition inspection. Provides technical information and guidance to shipboard Engineers and crew directly, as directed by the Assistant Port Engineers. Interfaces with Marine Operations and Hotel Operations. Ensures vessel compliance with all USCG, USPH, FDA, EPA, and other federal regulations Performs other duties as directed. Attributes for Success: Ability to identify, manage, and solve problems. Ability to act with urgency to completed time sensitive tasks. The ability to diagnose machinery malfunctions and recommend a course of corrective action. Ability to read and understand blueprints and machinery systems' technical manuals. The ability to work on various computer programs including Microsoft word, Excel and HelmConnect. Ability to read and understand repair manuals. Mechanically inclined. Proficient with hand and power tools. Knowledgeable of diesel and gas engines. Ability to learn and take direction from port engineer. Licenses and Registrations: Valid driver's license. Possess a Valid TWIC (Transportation Worker Identification Card). Required Education and Experience: Must be at least 18 years old. High school diploma or equivalent or equivalent related experience. Typical Work Environments: This position includes a high level of travel to Fleet concentration areas. Frequently underway time for short durations performing, testing, inspections, ship checks, and other events as needed. Travel up to 80% of the time. Vendor maintenance shops, paint shop, various buildings and storage areas. Vessel engine room, bow thruster space and various void spaces throughout vessel. Additional Requirements: Subject to a background investigation. Subject to a pre-employment physical. Ability to frequently traverse stairs, fixed ladders and ladder-wells while walking ships on a daily basis. Wherewithal to spend several consecutive days at sea while underway as needed. Capable of sitting for long periods of time, standing, walking, crouching and kneeling. Reaching, handling, using equipment, keyboards and mobile devices. Lifting boxes (files and supplies) up to 20 lb. Why Join American Cruise Lines? At American Cruise Lines, our people are the driving force behind our success. As the nation's leader in U.S. river cruising, we're experiencing rapid growth - and we're investing in top talent to grow with us. When you join our team, you'll find a dynamic work environment that values innovation, collaboration, and excellence, with real opportunities to build your career and make an impact.

Job Description Join the country's leading Cardiac PET provider! Cardiac Imaging Inc. (CII) is looking for talented and ambitious professionals to join our dynamic team and improve patient outcomes across the nation. Despite heart disease being the leading cause of death in the US, most physicians and patients do not have access to the leading technology in Cardiology. At CII, our mission is to create a more accessible healthcare system by enabling all physicians to treat their patients with the most advanced technology - all from the comfort of their own practice. Our innovative team drives this mission forward each and every day with our Mobile and Fixed Cardiac PET Solutions. As we continue to grow, we currently have a tremendous opportunity for a Senior Field Service Engineer who is up for the challenge. Summary: Responsible for providing installation, technical repair and service work in the field or at the hub for equipment and systems, including ensuring equipment in trailers does not interfere with the safety of operation of the trucks and trailers on roadways. Lead or assist with the installation and servicing of medical imaging equipment and provide assistance to Service Engineers, Technicians as well as Apprentices. Repair, replace or install parts and devices with expertise as required. Essential Functions: The following list of essential functions is not intended to be restrictive or all inclusive. The fact that certain duties may not be listed does not limit the assignment of additional and/or other duties. Independently complete full mobile unit load inspection to ensure secure road safety, including PET-CT and Uninterrupted Power Supply (UPS) secured to specifications, in addition to checking electrical system for fire hazards and safe operation, quarterly or at least bi-annually, or sooner if problems arise. Exercise discretion to identify whether repairs are needed and, if so, what repairs to make. Complete safety checklist of mobile unit inspection to identify any abnormalities, weekly for local units, or at least 5-6 times per year for remote units. Exercise discretion to identify whether repairs are needed and, if so, what repairs to make. Perform trouble shooting and field repairs. Provide phone support for customers and CII clinical staff regarding technical issues in a professional and friendly manner. Prepare/perform equipment Preventive Maintenance according to specification and documentation. Submit and fill out all required paperwork and service reports in a timely manner, no later than 48 hours. Preparing equipment for customer installation, including staging system and testing for functionality including Packing, for PET/CT system, PET system, CT system, elution system, computer, laptop, dose calibrator, blood pressure monitor, ECG system, and systems for image data transfer. Parts testing at hub locations. Leading installation and deinstalls as required. Support team members especially service technicians and service apprentices in their trouble shooting, training and guidance for field repairs or preventive maintenance. Find spare parts if needed or support Inventory specialist in parts acquisition. Conduct training classes for existing or new equipment service. Inspect and report irregularities, cleanliness, defects of CII assets, including mobile and fixed sites. Maintain tools and calibration requirements. Always adhere to safety procedures. Travel up to 80% of the time. Other related duties as assigned. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job Physical activity - talking, hearing, balancing, stooping, kneeling, crouching, reaching, standing, pushing, pulling, lifting, grasping, and fingering. Medium work - exerting up to 50 pounds of force occasionally and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Visual Acuity - The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. The worker is required to have visual acuity to perform an activity such as: operates machines where the seeing job is at or within arm's reach; performs mechanical or skills trades tasks of a non-repetitive nature. The work is required to have the visual acuity to operate motor vehicles and/or heavy equipment. Travel: Extensive nationwide travel is required for this position, on a moment's notice if needed, including overnight stays. Qualifications and Requirements: An Associate's degree in electronics or equivalent work experience Five (5) or more years of Siemens Biograph system staging, installation and troubleshooting Two (2) or more years of experience as a Service Engineer with an established service organization or OEM in the Nuclear Medicine field or completed CII training. Basic computer skills, MS Suite Valid Driver's license and clean driving record Reliable Transportation Ability to travel US wide Ability to read operating manuals and instructions Ability to communicate fluently both verbally and in writing Problem-solving skills and ability to exercise independent judgment and discretion Knowledge of electronic safety and procedures, low to high voltage Electronics/Mechanical background Advanced Knowledge of PET/CT and or PET Self-driven, motivation to succeed Ability to learn company policies and adhere to them in the performance of all assigned duties and communicate any compliance deviations to management in a timely manner

We are seeking a skilled Electromechanical Engineer to design, develop, and maintain electromechanical systems and products. The ideal candidate will have a strong background in both electrical and mechanical engineering principles and will collaborate with cross-functional teams to deliver innovative solutions. Key Responsibilities: Design & Development: Create detailed designs for electromechanical systems, including circuit designs and mechanical layouts. Prototyping: Develop and test prototypes, utilizing hands-on techniques to validate design concepts. Collaboration: Work closely with electrical and mechanical engineers to ensure seamless integration of systems. Testing & Validation: Conduct performance testing and troubleshooting to ensure product reliability and compliance with industry standards. Documentation: Prepare and maintain technical documentation, including design specifications, test reports, and user manuals. Project Management: Assist in project planning and management, including timelines, budgets, and resource allocation. Continuous Improvement: Identify opportunities for product and process improvements and implement solutions to enhance efficiency and performance. Compliance: Ensure all designs and processes adhere to relevant safety and regulatory standards. Qualifications: Education: Bachelors degree in Electromechanical Engineering, Mechanical Engineering, Electrical Engineering, or a related field. A Masters degree is a plus. Experience: 5 years of experience in electromechanical design and engineering. Skills: Proficient in CAD software (e.g., SolidWorks, AutoCAD). Strong knowledge of electrical circuits and mechanical design principles. Excellent problem-solving and analytical skills. Strong communication and teamwork abilities.

With a passion for life Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers. Are you looking for an inspiring career? You just found it. Job Overview The Staff Engineer, Sustainability leads sustainability initiatives across product development, operations, and supply chain while establishing governance frameworks. It ensures measurable environmental impact reductions, compliance with FDA/ISO standards, and trusted performance metrics aligned with business strategy. Job Responsibilities and Essential Duties * Drive carbon reduction roadmap and eco-design principles. * Lead lifecycle assessments and integrate sustainability into product development. * Collaborate with suppliers on low-carbon initiatives. * Support compliance with ISO 14001, ISO 14040, and FDA standards. * Ensure raw material compliance to include RoHS, REACH, EU MDR Prop65 * Define and standardize governance & KPI's across teams. * Ensure data integrity and consistent reporting. * Build dashboards to track sustainability and performance KPIs. * Review and update governance to align with evolving strategies. Minimum Requirements * Degree in Engineering, Sustainability, Project Management, or Data & Analytics. * 7+ years in sustainability, governance, or regulated environments. * Knowledge of lifecycle assessment, ISO frameworks, and BI tools (Power BI, Tableau). * Strong communication, stakeholder management, and analytical skills. * PMP Certification a plus. Salary range: $98,000.00 - $125,000.00 plus bonus targeted at 10% (depending on overall company performance) #LI-LG1 About us With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries. Benefits at Getinge: At Getinge, we offer a comprehensive benefits package, which includes: * Health, Dental, and Vision insurance benefits * 401k plan with company match * Paid Time Off * Wellness initiative & Health Assistance Resources * Life Insurance * Short and Long Term Disability Benefits * Health and Dependent Care Flexible Spending Accounts * Commuter Benefits * Parental and Caregiver Leave * Tuition Reimbursement Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law. Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

Job Description T&M Associates is seeking a multi-talented Staff Engineer to join our Water / Wastewater Department! This is an excellent opportunity for an engineer looking to advance their career to learn and grow within the framework of an engineering consulting firm. Responsibilities include the design projects in water and wastewater treatment facility, and linear infrastructure, as well as pumping stations and condition assessments, as well as field inspections, as required. Responsibilities Prepare plans, specifications, cost estimates, reports, and bid packages. Conduct construction observation for municipal infrastructure projects (e.g., sewer, storm drain, water). Ensure contractor compliance with design drawings and specifications. Perform quantity measurements, review shop drawings, and prepare daily field reports. Coordinate with municipal staff, residents, and other stakeholders. Participate in project discussions regarding technical approach, cost, and scheduling. Qualifications Bachelor's degree in either Civil or Environmental Engineering field is required. 2 - 4 years of related experience is preferred. Engineer in Training (EIT) certification is preferred with the goal to obtain a Professional Engineer's (P.E.) License. Proficient in AutoCAD and Civil 3D is required. Detail-oriented with a strong command of design principles and the ability to develop neat and accurate design calculations. Excellent analytical, interpersonal, writing, and verbal communication skills are required. Ability to work with peers and senior management and be a team player. Ability to organize and manage multiple priorities. T&M Associates is committed to pay transparency and equitable compensation practices in compliance with applicable laws, including the New Jersey Equal Pay Act. T&M estimates that the salary range for this position will fall between $79,000 - $103,000. The actual salary offered may vary within this range, depending on a variety of factors including the candidate's experience, educational qualifications, specific skills and knowledge, as well as internal pay equity and geographic location. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities - all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at *********************** #LI-HYBRID

Senior Simulation Engineer (Bearings & Seals) About LiquidPiston: At LiquidPiston, we're redefining what's possible in internal combustion. Our patented X-Engine architecture delivers a lighter, smaller, and more efficient solution compared to traditional engines - enabling new capabilities across aerospace, defense, and clean power generation. We're not just building engines - we're pushing the boundaries of innovation in power and propulsion. As part of our team, you'll work alongside passionate engineers, designers, and researchers committed to solving hard problems and bringing cutting-edge technology to life. If you're excited about clean-sheet engine design, real R&D challenges, and the opportunity to make a direct impact in a small, agile team - this is your chance to help build something truly revolutionary. Position Overview: The Senior Simulation Engineer will lead the design, development, and validation of rotary engine sealing systems and related components. This role involves applying advanced principles of tribology, materials science, and dynamic simulation to optimize seal performance, durability, and reliability under demanding operating conditions. The position requires close collaboration with manufacturing and engineering teams, hands-on problem solving during testing, and the ability to communicate technical findings effectively. The ideal candidate will have deep expertise in high-temperature engine components, strong analytical skills, and a proven track record in independent and collaborative R&D projects. Responsibilities: * Rotary Seal Development: Lead the design and refinement of the rotary engine sealing system, including Apex Seals and Face Seals. * Journal Bearing Design: Contribute to the design, material selection, and optimization of journal bearings. Analyze bearing loads, clearances, oil flow, and housing deflection to ensure hydrodynamic stability and durability. * Tribology and Wear: Apply advanced principles of tribology to minimize friction, optimize lubrication, and predict/mitigate wear on seals and housing surfaces. * Dynamic Simulation: Develop and utilize 1D/3D dynamic models to analyze seal motion, contact pressure, leakage, and flutter under various operating conditions (speed, temperature, load). * Materials and Manufacturing: Specify and qualify materials appropriate for high-temperature, high-pressure sliding contact, and collaborate with manufacturing partners on component specifications. * Thermal and Structural Analysis (FEA/CFD): Utilize Finite Element Analysis (FEA) to assess thermal distortion, structural integrity, and mechanical stress on sealing components and their supporting structures (rotor, housing). * Validation and Testing: Design, execute, and analyze engine test plans focused on seal performance, durability and friction. * Troubleshooting: Diagnose and resolve complex sealing-related engine performance issues identified during dyno testing and field trials. * Communicate findings clearly and effectively to stakeholders. Requirements: * Bachelor's degree in Mechanical Engineering, Materials Science, or a related field (Master's preferred). * 5+ years of experience in the design, development, and validation of ICE power cylinder ring packs and cylinder bores. * Proficiency with advanced engineering simulation tools (e.g., FEA/CFD, and specialized Ring Dynamics software). * Programming languages: Matlab (MUST), Python/C++ * Deep understanding of high-temperature materials science and their application in severe engine environments. * Experience with advanced surface treatments or coatings for friction reduction and wear resistance. * Proven ability to work independently and collaboratively in a fast-paced R&D environment. Benefits & Perks * Flexible PTO: We value work-life balance and encourage time to rest and recharge. * Health & Wellness: Comprehensive medical and voluntary dental, and vision coverage - you choose what works best for you. * Equity Participation: Permanent employees receive RSUs (Restricted Stock Units). * 401(k) Match: We offer a 401k w/100% matching up to 3% of your salary and then 50% of contributions between 3-5% * Career Growth: Ongoing training, mentorship, and learning opportunities to accelerate your growth. Our Culture At LiquidPiston, we embrace challenges, move fast, and celebrate curiosity. Our team thrives on collaboration, creativity, and perseverance. We understand that innovation involves risk-and we're not afraid to fail as we move forward. Equal Opportunity Employer LiquidPiston, Inc. is proud to be an Equal Opportunity Employer. Qualified applicants will not be discriminated against, and receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, or protected veteran status or disability. All offers of employment at LiquidPiston are contingent upon successful completion of a pre-employment background check and drug screening.

Electrical distribution equipment engineering and supply company specializing in industrial construction projects. Our customers include some of the largest Korean and global manufacturing and EPC companies as well as the US Military serving in Korea. Majority of the work will be performed at our Fort Lee NJ based office however we may require some domestic and overseas travel to manage large scale projects from time to time. Prolonged business trips over one month will be well compensated with overtime per diem structure. Responsibilities: Assist in putting together electrical packages for private and public development bids Manage shipping and delivery of items from manufacturer to end user Evaluate new company strategies and procedures Ensure project deadlines and cost targets are met Maintain required project documentation Serve as a liaison between suppliers and end users Travel to site assist on-field engineer analyze electrical drawings, specifications Assist field service personnel with equipment startup, troubleshooting, and training. Qualifications: Strong analysis and critical thinking skills Deadline and detail-oriented Strong leadership qualities Engineering background preferred Project management background preferred Technical skills required: Word, Excel, Outlook, Powerpoint / AutoCAD experience preferred Certificates: FE/PE preferred but not required Korean language proficiency required

Trexquant is a growing systematic fund at the forefront of quantitative finance, with a core team of highly accomplished researchers and engineers. We are in the process of optimizing and reimagining our quant platform to keep pace with our expanding trading operations. To support our rapid growth, we are seeking a talented C++ Trading & Simulator Engineer to join our growing technology team and help build the next generation of trading systems and analytics platforms. As a C++ Trading & Simulator Engineer, you will work closely with quantitative researchers and traders to design, develop, and optimize high-performance systems for algorithmic trading. Your responsibilities will include building and maintaining the core infrastructure for trading simulations, data pipelines, and low-latency execution platforms. The ideal candidate will have a strong background in C++ development, and experience in creating scalable, low-latency, high-throughput systems.

Our client is seeking a skilled and motivated Electrical Test Engineer to join our team. The successful candidate will be responsible for testing, diagnosing, and troubleshooting electrical systems and components, ensuring compliance with safety and quality standards. If you are an experienced Electrical Test Engineer looking for a new challenge, we would love to hear from you. Key Responsibilities: Perform electrical testing on products, systems, and components. Diagnose faults and ensure systems operate within safety regulations. Maintain and calibrate testing equipment. Ensure compliance with industry standards and regulations. Requirements: Qualification in Electrical Engineering or a related field advantageous. Proven experience in electrical testing, fault-finding and troubleshooting. Knowledge of electrical safety regulations and standards. Experience with test equipment such as oscilloscopes, multimeters or power analyzers. Strong analytical and problem-solving skills. Ability to work independently and as part of a team. Excellent attention to detail Benefits: Starting salary of £13.21/hour 38 hours per week Working Hours Monday to Thursday 7:30 to 4:30pm 30 mins lunch. Friday 7:30am to 11:30am Overtime @ 1.33 for the first 4 hrs @ 1.5 after. 36 days holiday per annum

About Altus Power Altus Power is a leading U.S. clean power company, driving the commercial-scale solar economy through a fully integrated platform that invests in, constructs, develops, finances, owns and operates renewable energy infrastructure. With over 1GW of operating assets across 26 states, we're delivering innovative, high-impact energy solutions to Fortune 1000 companies, financial institutions, households, municipalities and more. A portfolio company of TPG Rise Climate and backed by financial partners like Blackstone and Goldman Sachs, we're built for scale, accelerating the shift to reliable, local clean power for communities and businesses nationwide. Headquartered in Stamford, Conn. - just a short train ride from New York City - we offer a fast-paced, collaborative environment where passionate, mission-driven professionals come together to power a cleaner future. We lead with vision. We act with purpose. And we're looking for smart, driven people ready to help power what comes next. Responsibilities: * Ensures SCADA systems are available, secured and functioning at optimal levels * Reviews and responds to reactive maintenance of hardware, communication, and electronic circuits and systems failures * Interprets and modifies work for response to inquiries and issues with multiple projects * Update or create documentation for site equipment, communication flow, and remote access, and continually work to improve our collective site documentation * Ability to work beyond IT applications, such as industry-relevant applications like SQL databases, logic programming, and various meter and SEL products * Be comfortable working mainly with computer technology while being on the phone with local engineers/subcontractors * Identifies problems, research solutions for recommendation, and secures replacement equipment and parts with our Procurement Team Qualifications: * Bachelor's degree Electrical, Mechanical, Computer Science Engineering or related discipline * Minimum of 2 years SCADA experience * Excellent troubleshooting skills and an analytic mindset. * Knowledge of TCP IP, serial, optical fiber, and wireless radio network structure. * Knowledge of industry protocols, DNP3, Modbus, and OPC. * Knowledge of Network, firewall, and VPN structure, and ability to troubleshoot them. * Experience configuring routers, cell modems, and switches * Up to 30% travel and troubleshooting in the field will be required. * Proficient use of Microsoft office tools including but not limited to Word, Excel, Outlook, Sharepoint, Power BI * Experience using task management tools including but not limited to; MS Teams, Smartsheet, or others. Work Life at Altus Our team is the asset we are most proud of. We aim to create a positive work-life balance. Here are a few of the benefits we offer: * Competitive compensation * Health and Dental Insurance (100% of premium paid of Company's standard policy) * Participation in 401k Plan * Paid cell phone service on Company's plan * Company paid lunch in the office * Company paid membership to building gym * Two monthly work from home days Altus is unequivocally committed to the principles of equal employment.

Job Description Full-time | Professional Locations: Clifton Park, Cohoes, East Syracuse, Monroe, New Windsor, Poughkeepsie, Staten Island, Syracuse, Wappingers Falls, NY Why Join Rezolut? At Rezolut, we're redefining diagnostic imaging services across the Northeast. We focus on delivering exceptional Mammography care, leveraging advanced technology and a patient-first mindset. If you are a GE or Hologic Mammography expert looking for hands-on work, career growth, and the ability to make a real impact, this is your opportunity.What You'll Do Lead service, maintenance, and repair of GE and Hologic Mammography systems, ensuring the highest standards of performance. Perform preventive maintenance, calibrations, quality control (QC), and quality assurance (QA) according to OEM specifications. Troubleshoot complex mechanical, electromechanical, and electronic issues on Mammography equipment. Maintain accurate service records and communicate effectively with customers, ensuring rapid resolution of issues. Collaborate with team members while operating independently in the field. Travel regularly to customer sites throughout the Northeast. What We're Looking For Strong hands-on experience servicing GE and Hologic Mammography equipment (minimum 2+ years). Associate's degree, OEM Radiology, Electrical, or Technology training preferred. Proficient with computer tools (MS Word, Excel, PowerPoint, Outlook). Excellent problem-solving, analytical, and communication skills. Self-motivated, adaptable, and able to thrive in a fast-paced environment. Valid driver's license with a clean record. Nice to Have Experience with other imaging modalities (Ultrasound, MRI, CT, X-ray) and OEM brands such as GE and Hologic. Customer-focused service experience in a healthcare environment. What We Offer PTO accrual from day one (Full-Time) 6 Observed Holidays Medical, Dental, Vision, Life, and voluntary insurance options 401(k) Retirement Plan Employee Assistance Program Join us and be a key part of a team that delivers excellence in Mammography imaging across the Northeast.

JOB TITLE: Field Engineering Technician TYPE: Full time, regular COMPENSATION: $29.00/hr - $36.00/hr Clarapath is a medical robotics company based in Westchester County, NY. Our mission is to transform and modernize laboratory workflows with the goal of improving patient care, decreasing costs, and enhancing the quality and consistency of laboratory processes. SectionStar by Clarapath is a ground-breaking electro-mechanical system designed to elevate and automate the workflow in histology laboratories and provide pathologists with the tissue samples they need to make the most accurate diagnoses. Through the use of innovative technology, data, and precision analytics, Clarapath is paving the way for a new era of laboratory medicine. Role Summary: The Field Engineering Technician will play a critical role in supporting the installation, operation, and service of Clarapath s SectionStar , our advanced electro-mechanical device, at customer sites. This position requires strong technical aptitude, hands-on troubleshooting skills, and the ability to work independently in dynamic field environments. Working closely with our engineering, manufacturing, and customer support teams, this individual will ensure successful deployments, perform on-site diagnostics and repairs, and provide valuable feedback to improve product performance and reliability. We are seeking a proactive, detail-oriented technician who thrives in fast-paced settings, communicates effectively with customers, and is eager to apply problem-solving skills to real-world technical challenges. Responsibilities: Install, configure, and commission SectionStar units at customer sites Perform on-site diagnostics, troubleshooting, and repair of electro-mechanical and control-system components Use software tools to diagnose issues, identify root causes, and support machines deployed in the field Conduct preventive maintenance and routine system health checks Accurately document service activities, maintenance findings, and corrective actions Collaborate cross-functionally with engineering, manufacturing, and customer support teams to communicate field issues and recommend product improvements Support beta testing, validation activities, and field deployment of product updates Maintain a high level of professionalism and clear customer communication while representing Clarapath Ensure compliance with safety protocols, quality standards, and applicable regulatory requirements Qualifications: Associate degree or technical certification in engineering technology, electronics, mechanical systems, or a related field (Bachelor s degree preferred) 2+ years of experience in field service, technical support, electro-mechanical equipment maintenance, or a related role Strong troubleshooting skills across mechanical assemblies, electrical systems, sensors, and control hardware Experience diagnosing basic electrical issues using multimeters Hands-on experience with wire crimping and cable assembly Ability to read and interpret schematics, wiring diagrams, and mechanical drawings Comfortable working with software tools and command-line interfaces with training and guidance from the software team Ability to work with small electro-mechanical components in tight spaces; steady hands required Competency in handling warehouse equipment such as hand trucks and electric stackers Excellent communication skills, strong customer-service orientation, and attention to documentation detail Ability to travel frequently to customer sites (up to ~50% -75%) Ability to lift and maneuver equipment as required for installation and service tasks Familiarity with laboratory or medical devices, a plus Company Offers: Competitive salary will be commensurate with experience and education Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays) A collaborative and diverse work environment where our teams thrive on solving complex challenges Ability to file IP with the company Connections with world class researchers and their laboratories Collaboration with strategic leaders in healthcare and pharmaceutical world A mission driven organization where every team member will be responsible for changing the standards of delivering healthcare Clarapath is proud to be an equal opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. In addition to federal law requirements, Clarapath complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.