Field engineer jobs in Greece, NY

Project Engineer-Mechanical_Rochester, NY_Full-Time (FTE)_Direct Hire Project Engineer-Mechanical Job Type: Full-Time (FTE) Base Salary: $100,000 to $150,000+Best-in-class benefits Industry: Construction & Trades Job Category: Engineering Job Description: Responsibilities: *Lead and perform engineering evaluations and analyses, field inspections, design drawings, technical specifications and cost estimations. *Lead and perform standard mechanical engineering analysis of existing and new building mechanical, plumbing and fire protection systems utilizing the latest codes and technologies to provide optimized designs. *Coach/Mentor junior staff as a technical expert. Requirements: *Knowledge of NYS Mechanical, Energy and Plumbing codes, NFPA. *Proficiency in AutoCAD, Revit MEP and Microsoft Office Suite. *Ability to work in a team and communicate effectively both written and verbally. *Energy Modeling experience (Carrier HAP, TRANE TRACE, or EQUEST), LEED Green Associate and Commissioning experience, preferred. *Experience, Education, and Certification *BS in Mechanical Engineering/Engineering Technology *NYS PE required *10+ years of post-college experience. *Specific areas of expertise include chilled and hot water systems, industrial process related mechanical, building HVAC, controls, plumbing systems and fire protection. *Experience designing HVAC and plumbing systems for schools, healthcare facilities and commercial projects is preferred. Work Environment: *Professional in-office environment *May require travel to New York state job sites 10% of the time. Physical Demands: *The job requires prolonged periods of sitting at a computer. *Travel may be required within NY State. Benefits - Full Relocation Assistance Available - Possible for ideal candidate Minimum Education - Bachelor's Degree Willingness to Travel - Occasionally

The Facilities Engineer is the technical expert to address a multitude of building, land and process engineering requirements as Eastman Business Park continues to grow its development with both Kodak and external Kodak tenants acquiring space or constructing buildings. This responsibility is the primary source for investigation for Kodak site projects, tenant projects, and is the Energy Manager representing Kodak EBP buildings. The role utilizes various tools and software to monitor building utility consumption to assist with determining energy reduction projects and systems upgrade/modernization for the organization. The Facility Engineer collaborates with RED Rochester and equipment providers to coordinate organizational energy and sustainability programs and provide analysis, information, and recommendations to applicable leadership. Responsible for providing technical analysis, review, measurement, and verification projects. Responsibilities: • Acts as project lead for development of energy savings projects, working with NYSERDA and internal organizational representatives. • Leads technical projects involving Kodak or tenant requirements, evaluating needs, scoping project and providing project cost estimates. • Provides technical analysis/review for projects, providing project risk assessment. • Identify and establish working relationships with all necessary engineering, construction, and procurement firms (with focus on energy conservation and generation resources) required to execute energy recommendations. • Perform building “walk-through” and identify energy conservation measures (architectural, mechanical, electrical, etc.) throughout Eastman Business Park buildings. • Effectively develop scopes of work for and manage consulting engineers performing building audits. • Effectively analyze and assess the economic impacts of utility company rate structures and supply side options in a wide variety of customer environments. • Use of simulation software and spreadsheets to accurately represent pre and post retrofit building operation and customizes software and spreadsheets to achieve desired technical results and presentations. • Recommends best methods for measurement and verification of system performance. • Have working knowledge of DDC & PLC logic, PID loop control etc. on systems such as Rosemount; Siemens; DeltaV; Schneider; Alerton; Allen-Bradley etc. • Interface with various existing building automation systems networked between buildings. Modify and repurpose systems as required to optimize operations for energy reduction. Update and/or modify SCADA graphical user interfaces as necessary on various platforms. ie.: Intellution Fix32; GE iFix; DeltaV iFix etc. • Troubleshoot sitewide control issues to determine the root cause of problems. • Calibrate field instrumentation as necessary to maintain accurate site system control. • Conducts interim reviews during project construction to assess guaranteed impact of any changes to the original contract scope of work. • Accurately assess and provide feedback on project engineering risk. • Provide continuous improvement recommendations for optimizing energy usage and equipment upgrade and modernization. • Analyzes data output for trends and/or any deviations that need further investigating. • Assists in the preparation of cost estimates for projects. Qualifications: • Bachelor's Degree in Engineering or related discipline. • 7 Years+ experience in a related field in an industrial/manufacturing environment. • Demonstrated experience and utilities expertise in buildings systems and equipment processes. • Broad knowledge of various skilled trades. Personal attributes: • Excellent customer service skills required, daily interface with both internal Kodak and external tenant needs. • Understands concepts of continuous improvement to drive efficiency in day-to-day work. • A high level of professionalism, integrity, and discretion in interactions with building occupants, contractors and team members. • Experienced with safe work practices/requirements and ensuring compliance. • Excellent verbal and written communication skills for communicating within team and with internal and external tenants. • Strong problem solving and analytical skills. • Strong team player. • Excellent interpersonal skills and able to work cooperatively within a team environment, along with demonstration of flexibility. • Able to organize/prioritize personal workload. • Ability to work in a fast-paced, changing work environment. Physical Requirements: • Regularly lift and or move up to 25lbs/12kg. • Regularly required to stand; walk; sit, bend, and talk or hear. • Heights; may require some work from a step ladder. • Frequently required; use hands to manipulate or feel and reach with arms. • Work may require employee to be exposed to inclement weather conditions. • Some repetitive work: potential use of hand tools to demonstrate actions.

O'Connell Electric Company is seeking an entry level Engineering, Procurement, and Construction Field Engineer. This full-time entry level engineering position will work closely with the EPC Manger, supporting Project Managers, customers and clients. This role will provide professionalism that bridges the gap between project management and the on-site construction team, overseeing the engineering, procurement, and construction phases of a project to ensure it meets quality, budget, and schedule goals. This position does require frequent travel to work sites within New York State. A valid driver's license is required. Responsibilities: The following duties and responsibilities are intended to describe the general nature and scope of work being performed by this position. Assist with site inspections to ensure construction adheres to design plans, quality standards, and safety regulations. Help oversee the procurement and material management processes, ensuring the right materials are delivered to the site on time. Identify and resolve technical issues and challenges that arise during the construction process. Coordinating with project managers, superintendents, subcontractors, and other trade partners to ensure seamless project execution. Provide detailed insights and status reports on project progress, highlighting any areas requiring attention. Communicates, models and continuously reinforces company culture and values in a collaborative way with other team members. Organize project documents and drawings using designated software according to corporate policies. Manage day-to-day administrative items such as, RFIs, submittals, contracts, etc. Perform project close out and cost reconciliation Qualifications B.S. in Electrical, Civil Engineering, Construction Management, related major, or equivalent 0-3 years of electrical engineering or civil work experience preferred Microsoft Office proficient. Must be able to demonstrate understanding of civil, architectural, mechanical, and general construction techniques Excellent interpersonal, conflict resolution and communication skills. Ability to prioritize and manage multiple tasks, changing priorities as necessary Ability to work under pressure and adapt to changing requirements with a positive attitude. Ability to be self-motivated and eager to learn Ability to interact effectively and professionally with all levels of employees, both management and staff alike, vendors, clients, and others. Valid driver's license required Compensation: The minimum and maximum annual salary that O'Connell Electric Company, Inc. believes in good faith to be accurate for this position at the time of this posting is between $60,800 to $76,000 annually. It is important to O'Connell Electric that potential candidates for this position understand that compensation depends on numerous factors including the geographic location where the role will be performed, skills required, experience, complexity, travel, and market rate. O'Connell Electric aims to reward performance and attract top talent with competitive, fair pay and benefits. Please note that the top of the salary range represents exceptional, and/or senior-level positions, which meet all required qualifications. Actual offers take candidate's knowledge, skills, abilities, and experience into account. Equal Opportunity: O'Connell Electric is an equal opportunity employer and prohibits discrimination and harassment of any type. O'Connell Electric affords equal employment opportunities to employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

***This job req is subject to overtime discounts (0.95x exempt; 1.35x non-exempt) and a 10% discount after six months of service*** List BR only along with prescreen questions only at the top of the resume or it will be rejected. FG Job Posting ID: UIS2JP00002668 Job Class: FE 2 Work Location: 300 Forge Ave Geneva New York USA 14456 Driving/Non-Driving: Non-Driving Duration: Temp to Perm Minimum Experience: 4 years and must be reflected on resume MUST HAVE ON TOP OF EVERY RESUME 1. How many years experience do you have with installing Desktops: Laptops: Printers: Software: 2. How many years experience do you have with Desk Side Support 3. How many years experience do you have with Troubleshooting Repairs of Desktops: Repairs of Laptops: 4. How many years experience do you have with Software 5. How many years experience do you have with Hardware 6. How many years experience do you have with ticketing systems 7. Do you have youre A+ Certification 8. Have you ever worked for IF so when and who were you under 9. Do you have experience with Smart Hands please explain Skills Requested: Troubleshooting SW/HW issues Imaging/software instalation Organizational skills Attention to detail Description: As a Field Engineer 2, your primary responsibility will be installing, diagnosing, servicing maintaining computer-related products which may include but are not limited to desktop and laptop computers, printers, standard software, and networking devices (smart hands). When in support of ITO engagements, you will be recognized as desk side support specialist. You may be directed by Help Desk, Service Desk, or script using standard methods, techniques, and tools. You will handle more complex products, problems, and/or projects and may provide technical guidance to lower-level engineers. You may function as a team or on-site leader as necessary. You will provide technical support to customers in solving technical problems that occur during the installation or operation of company supported products. Responsibilities: May function as team or site leader providing direction to other technicians May support networking products via smart hands May have project management responsibilities for smaller projects Possesses other, high skilled, specialized technical skills Provides support for software and hardware support for desktops, laptops and servers (smart hands) Installs and maintains PCs and associated software and peripherals Performs installs, moves, adds and changes as required Tests and certifies PCs and client approved applications Provides follow-up on problems or escalation Maintains a high degree of professionalism in actions, demeanor and dress Ensures customer satisfaction throughout the service delivery transaction Ensures client specific Service Level Agreements are met and incident and request tickets are updated accordingly within the ticketing system Understands scope of work for client and performs only tasks that are within scope; out of scope tasks would be escalated to CDE, CSM or SDC

CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Seeking a detail-oriented Civil Field Engineer to lead on-site investigations, perform specialized inspections, and oversee material testing. This role involves managing projects from start to finish, conducting precise engineering calculations, and delivering accurate, timely reports that meet industry standards. Responsibilities Conduct specialized inspections and field evaluations, including soils, concrete, masonry, and steel material testing. Perform geotechnical investigations, such as test boring and test pit observations, supported by laboratory analysis and accurate geotechnical calculations. Collaborate with Senior Professional Engineers to execute a wide range of field and technical tasks. Prepare detailed engineering studies and comprehensive reports that meet project and regulatory standards. Coordinate and manage projects related to Special Inspections and Construction Materials Testing, ensuring timely delivery and quality outcomes. Implement rigorous Quality Assurance protocols, maintaining strict adherence to technical standards, codes, and best practices in both field and laboratory settings. Commit to professional growth through continuing education and maintaining current certifications. Qualifications Bachelor's degree in Civil Engineering or a closely related discipline. Engineer-in-Training (E.I.T.) certification required. Proficiency in Microsoft Office Suite (Word, Excel, Outlook) for documentation and reporting. Strong interpersonal skills with the ability to build and maintain effective relationships with managers, team members, and clients. Exceptional organizational and time-management abilities to handle multiple priorities efficiently. Knowledge of construction materials, procedures, and documentation is highly desirable. Valid driver's license and ability to travel to project sites as needed. Compensation: $24 - 30/hour Benefits CME offers competitive wages and benefits such as: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE).

We are currently seeking qualified candidates for consideration to fill an open Telecommunications Engineer in our Program Management Services Division. The Program Management Services Division at LaBella provides comprehensive management services for complex projects and multi-year capital programs. Project teams are established to provide a customized mix of engineering, project management, financial control and monitoring, administrative, and technical support services. Salary Range: $75,000 - $120,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Responsibilities Support ALL capital Projects involving digitization and automation of electric operations, gas operations, Fossil Hydro Operations, Process and Technology, AMI, and Control & Automation Systems as follows: Project Evaluation, Feasibility and Planning reviews Contract reviews (non-legal) Monitoring of Construction progress Monitoring of equipment and material compliance with specifications Engineering design and planning reviews Schedule Analysis and Optimization Equipment Commissioning and Verification Test Operational and Maintenance Review Cost/Benefit Analysis General reporting to owner on the basis of technical and business competence Requirements 2-5 years of engineering experience in the functional area Bachelor's degree in engineering or engineering technology PE requested Benefits Body, mind, and wallet-LaBella's benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. Flexible Work Schedule Health/Dental Insurance 401k Plan with Employer Match Short & Long Term Disability Profit Sharing Paid Time Off Leadership Development Program Fitness Reimbursement Tuition Reimbursement Referral Bonus Program Wellness Program Team Building Events Community Service Events

Opportunities: We have multiple opportunities to join our Field Service Engineering team at different levels within the upper 48 states: Field Service Engineer II, III, and Senior. Qualifications for each level will be dependent on education and years of experience. We will be hiring candidates throughout the year in different regions. How You Will Make an Impact: As a Field Service Engineer, you will provide advanced technical support and assistance, ensuring the efficient performance of sophisticated equipment and systems, specifically for our Materials and Structural Analysis (MSD) Electron Microscopy (EM) business that designs, manufactures, and supports the broadest range of high-performance microscopy workflow solutions that provide images and answers in the micro-, nano-, and picometer scales. You will lead high-complex problem-solving efforts and help your Supervisor and/or Service Manager to upgrade the technical skills of all Field Service Engineers in your assigned scope to a higher level. KEY RESPONSIBILITIES: Ensure overall service delivery meets / exceeds client expectations and contractual obligations. Provide strategic feedback and technical advice to senior management. Engage with internal and external customers to align service offerings with business needs. Foster a collaborative and innovative team environment. Support the professional technical development and career growth of the engineering team. Drive continuous improvement initiatives within the department. MINIMUM EDUCATION & EXPERIENCE Bachelor's degree or higher in mechatronics, mechanical/electrical/electronic engineering, or equivalent. 8+ years of experience in SEM, FIB, LDB or in a related field. Extensive experience in repairing high-tech systems and advanced problem solving skills. KNOWLEDGE, SKILLS, ABILITIES Strong mentoring skills. Ability to travel frequently. Excellent communication skills in English PHYSICAL REQUIREMENTS / WORK ENVIRONMENT Excellent hand-eye coordination and manual dexterity. BENEFITS We offer competitive remuneration, annual incentive plan bonus, healthcare, and a range of employee benefits. Thermo Fisher Scientific offers employment with an innovative, forward-thinking organization, and outstanding career and development prospects. We offer an exciting company culture that stands for integrity, intensity, involvement, and innovation! Compensation and Benefits The hourly pay range estimated for this position Sr Engineer, Field Service based in California is $49.58-$74.37. This position may also be eligible to receive a variable annual bonus based on company, team, and/or individual performance results in accordance with company policy. We offer a comprehensive Total Rewards package that our U.S. colleagues and their families can count on, which includes: A choice of national medical and dental plans, and a national vision plan, including health incentive programs Employee assistance and family support programs, including commuter benefits and tuition reimbursement At least 120 hours paid time off (PTO), 10 paid holidays annually, paid parental leave (3 weeks for bonding and 8 weeks for caregiver leave), accident and life insurance, and short- and long-term disability in accordance with company policy Retirement and savings programs, such as our competitive 401(k) U.S. retirement savings plan Employees' Stock Purchase Plan (ESPP) offers eligible colleagues the opportunity to purchase company stock at a discount For more information on our benefits, please visit: *****************************************************

Why join us? It's an exciting time at AtkinsRéalis! We are rapidly growing in the US. Our company purpose is to build a better world for our planet and its people. We recognize the importance of making sure that our clients and employees, feel this purpose every day. AtkinsRéalis is proud of our company culture that promotes, diversity, equity and inclusion. Our company ethos include collaboration through the connection of people, data and technology. We are a global firm, who leverages having employees located throughout the world, creating valuable partnerships and doing our part to make this planet and its people, thrive. We need energetic, passionate and eager professionals like you to join our team. There has never been a better time to be a part of AtkinsRéalis! We are seeking a Telecommunication Engineer to join our team in Rochester, NY or Binghamton, NY, to lead and work on various Telecommunication projects. The Telecommunications Engineer will support a number of telecommunications capital projects within the electric distribution and transmission business units in area of, utility digitization and automation of electric operations, Gas operations, Fossil Hydro Operations, Process and Technology, AMI, and Control & Automation Systems. Position is expected to be 3 days in office, hybrid work schedule. About Us AtkinsRéalis is one of the world's most respected design, engineering and project management consultancies. AtkinsRéalis has been providing infrastructure planning, engineering, construction, environmental consulting, urban planning, architecture, and program management services to public and private clients across the United States for more than 50 years. AtkinsRéalis has the depth and breadth of expertise to respond to the most technically challenging and time-critical infrastructure projects and the urgent transition to a low-carbon economy. How will you contribute to the team? * Develop both non-complex and complex telecommunications (LAN/WAN) projects * Support capital project design and owner's engineer scope of work * Determine telecom criteria/requirements for capital and/or customer funded projects for T&D utility * Project Evaluation, Feasibility and Planning reviews * Contract reviews (non-legal) * Monitoring of Construction progress * Monitoring of equipment and material compliance with specifications * Engineering design and planning reviews * Schedule Analysis and Optimization * Equipment Commissioning and Verification Test * Operational and Maintenance Review * Cost/Benefit Analysis * General reporting to Customer on the basis of technical and business competence * Good Knowledge of telecom infrastructure and process flow to collaborate with the Operations and OT departments to propose then execute on changes and improvements to the AMI Wide Area Network (WAN) and Neighborhood Area Network (NAN) and other complex metering networks. * Planning and engineering of telecom infrastructure with an emphasis on resilient connectivity for Smart Metering and SCADA services. * Provide engineering functions\solutions to support the telecom engineering for the capital projects. What will you contribute? * Minimum 5 years of Telecommunication and engineering experience * Bachelor's degrees in Mathematics, Engineering, or Computer Science with at least 5 years of experience preferred * PE preferred * Be capable of obtaining NERC CIP security clearance with the associated background search * Be proficient with the applications within Microsoft Office 365 * Strong inter-personal skills * Advanced knowledge of Information/Operations Technology design and implementation required * Demonstrated ability to lead and drive solutions to complex problems or projects. preferred * Solid technical background with experience with Telecom WAN technologies including the following: * Networking, understanding of routing, DHCP, VPN technologies, and architecture required * Network tools including SSH, traceroute, ping, required * Understanding of network security and firewall concepts, radio networks and firmware updates preferred * Understanding FCC regulations preferred * Experience working with Telco circuit providers, devices, and services required * Analytical, troubleshooting, and process improvement experience required * Knowledge of Advanced Metering Infrastructure (AMI) preferred * Bucket truck experience below the power space preferred * The ability to demonstrate good communication skills both written and orally. This communication would be with team members, others' departments, regulating authorities and leadership local and abroad. required * Ability to maintain multiple tasks and manage expectations required * Demonstrated track record of building cross-functional relationships with key stakeholders, and overseeing the resolution of complex technical issues required * Proficiency in MS Office Suite and other business analytical tools required * Knowledge of electric and/or gas utility operations preferred * Previous work experience in IT, operational telecom, network or systems engineering, or metering operations preferred * Knowledge of electric and/or gas utility operations preferred * Previous work experience in IT, operational telecom, network or systems engineering, or metering operations preferred * Analytical, critical thinking and problem-solving skills. * Demonstrated ability to apply technical knowledge in a working environment. * A valid driver's license required with a safe driving history * Ability to prioritize work and be a team member on multiple projects at one time. * Knowledge of safety policy and potential hazards of the electrical transmission network. What we offer at AtkinsRéalis: AtkinsRéalis realizes that health, mental and financial wellbeing, are all equally needed to achieve balance in life. We are pleased to offer a robust rewards package that help our employees have peace of mind in and outside of work. Our benefit offerings address all of the areas that are part of living a healthy life. We recognize that what is important to people, continues to change. Some of our other benefits to ensure our employees feel supported, include continuing to offer health and dental coverage and a full list below. Our culture is one of providing support and training for our employees to thrive. We offer learning and development programs, training, career pathing opportunities, and a tuition reimbursement plan. At AtkinsRéalis, you will enjoy a robust rewards package which includes: * Competitive salary * Flexible work schedules * Group Insurance * Paid Family Leave * Two Floating Holidays * Paid Parental Leave (including maternity and paternity) * Pet Insurance * Retirement Savings Plan with employer match * Employee Assistance Program (EAP) * Learning and development programs, training, career opportunities and a highly regarded tuition reimbursement program * An inclusive culture of Employee Resources Groups centered around women, African-Americans, Hispanics, LGBTQ+, Neurodiversity and Emerging Professionals * A Foundation that is employee-funded with a 2-to-1 match from the company providing STEAM education for minorities from K-12 to college. If this sounds like you and you would like to expand your career with us, apply today! AtkinsRéalis is an equal opportunity, drug-free employer committed to diversity in the workplace. EOE/Minorities/Females/Veteran/Disability. Please review AtkinsRéalis Equal Opportunity Statement here: ************************************************************** AtkinsRéalis cares about your privacy and are committed to protecting your privacy. Please consult our Privacy Notice on our Careers site to know more about how we collect, use and transfer your Personal Data. By submitting your personal information to AtkinsRéalis, you confirm that you have read and accept our Privacy Notice. Expected compensation range is between $72,000 - $102,000 annually depending on skills, experience, and geographical location. Relocation assistance will be provided to qualified and approved candidates. Upon acceptance of an offer, all candidates must go through a drug screen test and background check. AtkinsRéalis is a federal contractor which mandates a satisfactory background screening report and drug test that supersedes state laws. Note to staffing and direct hire agencies: In the event a recruiter or agency who is not on our preferred supplier list submits a resume/candidate to anyone in the company, AtkinsRéalis family of companies, we explicitly reserve the right to recruit and hire the candidate(s) at our discretion and without any financial obligation to the recruiter or agency. ***************************************************** Worker Type Employee Job Type Regular At AtkinsRéalis, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences.

Why join us? It's an exciting time at AtkinsRéalis! We are rapidly growing in the US. Our company purpose is to build a better world for our planet and its people. We recognize the importance of making sure that our clients and employees, feel this purpose every day. AtkinsRéalis is proud of our company culture that promotes, diversity, equity and inclusion. Our company ethos include collaboration through the connection of people, data and technology. We are a global firm, who leverages having employees located throughout the world, creating valuable partnerships and doing our part to make this planet and its people, thrive. We need energetic, passionate and eager professionals like you to join our team. There has never been a better time to be a part of AtkinsRéalis! We are seeking a Telecommunication Engineer to join our team in Rochester, NY or Binghamton, NY, to lead and work on various Telecommunication projects. The Telecommunications Engineer will support a number of telecommunications capital projects within the electric distribution and transmission business units in area of, utility digitization and automation of electric operations, Gas operations, Fossil Hydro Operations, Process and Technology, AMI, and Control & Automation Systems. Position is expected to be 3 days in office, hybrid work schedule. About Us AtkinsRéalis is one of the world's most respected design, engineering and project management consultancies. AtkinsRéalis has been providing infrastructure planning, engineering, construction, environmental consulting, urban planning, architecture, and program management services to public and private clients across the United States for more than 50 years. AtkinsRéalis has the depth and breadth of expertise to respond to the most technically challenging and time-critical infrastructure projects and the urgent transition to a low-carbon economy. How will you contribute to the team? Develop both non-complex and complex telecommunications (LAN/WAN) projects Support capital project design and owner's engineer scope of work Determine telecom criteria/requirements for capital and/or customer funded projects for T&D utility Project Evaluation, Feasibility and Planning reviews Contract reviews (non-legal) Monitoring of Construction progress Monitoring of equipment and material compliance with specifications Engineering design and planning reviews Schedule Analysis and Optimization Equipment Commissioning and Verification Test Operational and Maintenance Review Cost/Benefit Analysis General reporting to Customer on the basis of technical and business competence Good Knowledge of telecom infrastructure and process flow to collaborate with the Operations and OT departments to propose then execute on changes and improvements to the AMI Wide Area Network (WAN) and Neighborhood Area Network (NAN) and other complex metering networks. Planning and engineering of telecom infrastructure with an emphasis on resilient connectivity for Smart Metering and SCADA services. Provide engineering functions\solutions to support the telecom engineering for the capital projects. What will you contribute? Minimum 5 years of Telecommunication and engineering experience Bachelor's degrees in Mathematics, Engineering, or Computer Science with at least 5 years of experience preferred PE preferred Be capable of obtaining NERC CIP security clearance with the associated background search Be proficient with the applications within Microsoft Office 365 Strong inter-personal skills Advanced knowledge of Information/Operations Technology design and implementation Demonstrated ability to lead and drive solutions to complex problems or projects. preferred Solid technical background with experience with Telecom WAN technologies including the following: Networking, understanding of routing, DHCP, VPN technologies, and architecture Network tools including SSH, traceroute, ping, Understanding of network security and firewall concepts, radio networks and firmware updates preferred Understanding FCC regulations preferred Experience working with Telco circuit providers, devices, and services Analytical, troubleshooting, and process improvement experience Knowledge of Advanced Metering Infrastructure (AMI) preferred Bucket truck experience below the power space preferred The ability to demonstrate good communication skills both written and orally. This communication would be with team members, others' departments, regulating authorities and leadership local and abroad. Ability to maintain multiple tasks and manage expectations Demonstrated track record of building cross-functional relationships with key stakeholders, and overseeing the resolution of complex technical issues Proficiency in MS Office Suite and other business analytical tools Knowledge of electric and/or gas utility operations preferred Previous work experience in IT, operational telecom, network or systems engineering, or metering operations preferred Knowledge of electric and/or gas utility operations preferred Previous work experience in IT, operational telecom, network or systems engineering, or metering operations preferred Analytical, critical thinking and problem-solving skills. Demonstrated ability to apply technical knowledge in a working environment. A valid driver's license required with a safe driving history Ability to prioritize work and be a team member on multiple projects at one time. Knowledge of safety policy and potential hazards of the electrical transmission network. What we offer at AtkinsRéalis: AtkinsRéalis realizes that health, mental and financial wellbeing, are all equally needed to achieve balance in life. We are pleased to offer a robust rewards package that help our employees have peace of mind in and outside of work. Our benefit offerings address all of the areas that are part of living a healthy life. We recognize that what is important to people, continues to change. Some of our other benefits to ensure our employees feel supported, include continuing to offer health and dental coverage and a full list below. Our culture is one of providing support and training for our employees to thrive. We offer learning and development programs, training, career pathing opportunities, and a tuition reimbursement plan. At AtkinsRéalis, you will enjoy a robust rewards package which includes: Competitive salary Flexible work schedules Group Insurance Paid Family Leave Two Floating Holidays Paid Parental Leave (including maternity and paternity) Pet Insurance Retirement Savings Plan with employer match Employee Assistance Program (EAP) Learning and development programs, training, career opportunities and a highly regarded tuition reimbursement program An inclusive culture of Employee Resources Groups centered around women, African-Americans, Hispanics, LGBTQ+, Neurodiversity and Emerging Professionals A Foundation that is employee-funded with a 2-to-1 match from the company providing STEAM education for minorities from K-12 to college. If this sounds like you and you would like to expand your career with us, apply today! AtkinsRéalis is an equal opportunity, drug-free employer committed to diversity in the workplace. EOE/Minorities/Females/Veteran/Disability. Please review AtkinsRéalis Equal Opportunity Statement here: ************************************************************** AtkinsRéalis cares about your privacy and are committed to protecting your privacy. Please consult our Privacy Notice on our Careers site to know more about how we collect, use and transfer your Personal Data. By submitting your personal information to AtkinsRéalis, you confirm that you have read and accept our Privacy Notice. Expected compensation range is between $72,000 - $102,000 annually depending on skills, experience, and geographical location. Relocation assistance will be provided to qualified and approved candidates. Upon acceptance of an offer, all candidates must go through a drug screen test and background check. AtkinsRéalis is a federal contractor which mandates a satisfactory background screening report and drug test that supersedes state laws. Note to staffing and direct hire agencies: In the event a recruiter or agency who is not on our preferred supplier list submits a resume/candidate to anyone in the company, AtkinsRéalis family of companies, we explicitly reserve the right to recruit and hire the candidate(s) at our discretion and without any financial obligation to the recruiter or agency. ***************************************************** Worker TypeEmployeeJob TypeRegular At AtkinsRéalis , we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences.

Cannon Industries, Inc. A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers' standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: This individual must function as a technical project leader for the organization with the responsibility of expediting the process flow of jobs through the shop from post order entry to the shipment of the product to the customer. All work must be performed in a timely and cost-effective manner. In this role, the engineer is required to perform complex engineering and/or design tasks that require the development of new and improved techniques and procedures. Minimum Qualifications: Intermediate level professional Two years or more of professional experience in a manufacturing business environment Five years or more of manufacturing/sheet metal/welding fabrication knowledge CNC machining / programming background is a plus A.S. Degree in Engineering required; Manufacturing, Mechanical or Industrial Degree (B.S. preferred) Specific Duties: Responsible for all phases of the quoting process including; developing a Bill of Materials for purchasing to facilitate pricing inquiries, calculating material usage's, etc. Perform all phases of Project Management duties including cost estimating, manufacturing engineering, and working to ensure quality production and on time shipping of customer orders Create detailed drawings for flat blank layouts using CAD system Monitor actual job cost vs. quoted job cost Drive process improvements to generate cost reduction Help write the process sheets (Travelers) for the jobs Ensure all programs are updated with any modifications from the previous run Design machining, inspection and assembly fixtures Provide technical direction to operators as needed Measurement Tools: On time delivery to customers Quality performance Decrease in job setup time on turret, mills and lathes Cost savings for production; including tooling Project management and document control organization skills Have a “Team player attitude”, promote commitment and follow through This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

If you are a team player with a passion to drive your career in Bridge Inspection, Popli Design Group (PDG) is the place for you! PDG is seeking a Junior Engineer to add to our growing and talented team. As a Junior Engineer specializing in Bridge Inspection, your role will involve assisting the Bridge Inspection Team Leaders in conducting inspections in the field. You will actively contribute to the inspection process, helping gather data and performing necessary tasks under the guidance of experienced professionals. Additionally, you will be responsible for conducting structural analyses of bridges to determine their capacity, utilizing your engineering knowledge and analytical skills. The perfect candidate should possess excellent written and verbal communication skills, allowing them to effectively document bridge conditions in the required format. This includes providing clear and concise descriptions along with appropriately referenced photographs. Being focused on providing quality work is essential, demonstrating attention to detail and a commitment to accuracy. You should have a working knowledge of relevant structural concepts pertaining to bridges and other highway structures, enabling you to understand and assess their condition. Responsibilities Assisting bridge inspection Team Leaders to perform inspections in the field. Structural analyses of bridges to determine the capacity. Entry of data into bridge inspection software and Microsoft Word/Excel/Access; development of structural drawings using CADD, and the compilation of reports and other documents. Requirements Excellent written and verbal communication skills, including the ability to document bridge conditions in required format, along with appropriately referenced photographs in a clear and concise manner. Must be focused on providing quality work. Working knowledge of relevant structural concepts of bridges and other highway structures. Experienced in common computer applications (e.g., MS Word, Excel, Access), experience with AutoCAD and/or MicroStation preferred. Experience Bachelor or master's degree in Civil Engineering. 0-3 years of experience. Driver's license with ability to drive work van/truck. Work Environment Combination of professional office environment and field work. Work alongside a Professional Engineer (PE). Position includes a career development plan with an established path towards their PE. Field work requires employees to be willing to work in various weather conditions and nature. Required to travel to project sites. Physical Demands Must physically be able to perform field inspection work, e.g., carry/climb ladders, wade in streams, work around traffic, work at heights, etc. This job requires prolonged periods of sitting at a computer. Lifting up to 50lbs is required. About Popli Design Group (PDG) PDG is a well-established multi-disciplinary architecture and engineering firm that has been serving clients since 1982. With four decades of experience and expertise, we have evolved from a transportation engineering firm to a comprehensive, full-service organization with seven office locations in New York State. Our extensive portfolio of successful projects has earned us a trusted reputation among our clients. Popli Design Group is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, genetics, disability or protected veteran status, and any other basis protected by applicable local, state, or federal law or Executive Orders. Good faith salary range is provided, and salary package will be commensurate with experience. Salary Description $70,000 - $100,000

Job Title: Mechanical Project Engineer ***Work Location: Canandaigua, NY*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Position Description Candidate will provide construction engineering services on several simultaneous federal projects ranging in value up to tens of millions to hundreds of millions of dollars in construction value. Experience with Medical Construction Projects, or other similarly complex projects is desired. “Large” projects are defined as a construction value of at least $100 million or more. Candidate will be responsible for site observation and reporting on multiple assigned projects to government personnel. Candidate will provide technical and administrative support. Oversee construction, contract administration, and quality assurance activities in accordance with established policies, procedures, and regulations. Analyze design and construction issues with respect to contract requirements. Deliver recommendations to government personnel regarding compliance with contract provisions. Candidate should be prepared to review and interpret plans and specifications, submittals, reports, schedules, modifications, cost estimates, pay applications, change orders and claims. Provide field surveillance and prepare daily detailed reports covering all pertinent factors affecting cost and engineering considerations. Participate in pre-construction conferences with government personnel. Interaction with client and contractors requires candidate to have a professional presentation along with excellent communication skills and attention to detail. Previous experience with US Army Corp of Engineers projects will also be viewed as a plus. Minimum Qualifications: Bachelor of Science in Engineering or related field from an accredited college. Minimum of 5 years of engineering; construction and contract administration experience. Experience on projects with government clients, preferred. US Army Corp of Engineering or USACE projects is preferred as well. Experience with Large "campus" type project is preferred Mechanical Systems experience is preferred. Benefits: Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. *******************

Less than 2 years experience Basic knowledge of RFI tracking Contract document review Basic scheduling techniques Payment review and preparation Previous construction experience a plus Proficient in basic computer skills (Windows/Outlook/Word/Excel and scheduling applications.

About Us: Headquartered in St. Louis, MO, USA, Afinitas is the global market leader for pipe and precast concrete equipment, forming systems and concrete accessories used to build the world's critical transportation, water and utility infrastructure systems. Afinitas is known for the innovative technologies and services it provides through its trusted HawkeyePedershaab, BFS, New Hampton Metal Fab and other well-known brands, which customers have relied upon for decades. Afinitas is a part of BW Forsyth Partners, LLC, the investment arm of Barry-Wehmiller, a $3 billion organization with nearly 12,000 team members united by a common belief: to use the power of business to build a better world. Job Description: Summary This Engineering and Quality Group position engineers products meeting design, performance, constructability and quality requirements. Responsibilities • To engineer manufactured products which meet specific contract, performance and quality requirements. • Review contract plans, proposals and appropriate state or other governing agencies specifications. • Determine if additional information is required to facilitate the complete design process. • Develop designs supported by engineering calculations and reports. • Determine special detail requirements and communicate design information to Detailers for shop drawing development. • Evaluate and determine adequacy of as-built condition of products deviating from design parameters as it relates to the intended performance characteristics. • Communicate and interact with project Owners, engineers, inspectors and contractors. • Special projects including but not limited to research and development, new product design, testing program advancement. • Provide customer supervision for product installation as required by project specification. • Ability to evaluate comments made by reviewing parties for validity and adjust design as necessary or create rebuttal argument as to why design alteration is not required. • Other duties as necessary. Qualifications Work Experience ……………………… 1 - 3 years in a Design Engineer role. * Education & Training ……………….. BA/BS in Civil or Mechanical Engineering.* * Or equivalent as determined by Afinitas* Skills and Knowledge Areas Required ………………………………….. Steel fabrication processing techniques and quality standards, contract document interpretation and communication, engineering calculations, multi-tasking, process adherence. Preferred …………………………………. Solid modeling, ASTM material specifications. At Barry-Wehmiller we recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. We know that our differences often can bring about innovation, excellence and meaningful work-therefore, people from all backgrounds are encouraged to apply to our positions. Please let us know if you require reasonable accommodations during the interview process. Barry-Wehmiller is an equal opportunity employer. M/F/D/V This organization uses E-Verify. Applicants may be subject to pre-employment screening which may include drug screening, reference checks, employment verifications, background screening and/or skills assessments. Company: Afinitas

Job Title: Project Engineer I Reports To: Engineering Manager Division/Department: GHM/Engineering Level of Work: Level II Entry level position that will learn to run design programs independently, read customer specifications, read terms and conditions, provide support for service and equipment in the field, and will learn to fill out O & D. Will concentrate on one product line with an introduction to other product lines. Key Results Areas by level of work: Level II: Service - Coordinating "production" with problem solving and prevention Resource management (material and people) * Communicates with shop staff, QA/QC inspectors, and engineering staff on a daily basis. * Interacts with customers to deliver first time quality. * Engages leadership team in setting and achieving goals. This includes working with key leadership both functionally and strategically to drive overall improvements inside and outside of engineering. * Plays an active role in product design/development including review of technical details, design for manufacture (cost effective and manufacturing process compliant) and design for test (efficient manufacturing test ensuring product quality). Resource scheduling, output management and reporting * Ensure open communication throughout the organization by keeping management informed of Project status and ensuring coordination of Lean activities. * Create metrics, deployment goals, and objectives to drive accountability throughout the project team. * Organizes, plans, reviews, and provides status of projects managed. * Engage in product requirements definition and reviews. * Participate as reviewer in the design review process. Continuous Improvement * Identify, review and develop product improvements. * Confers with management to establish continuous improvement goals/objectives and overall direction. * Identify areas with other functional leaders, employees, and customers to develop significant lean opportunities for improvement throughout the organization. * Chairs meetings and process improvement teams. Equipment & process maintenance * Development and maintenance of methods for measuring progress to ensure that project goals, objectives, and metrics are being met and maintained. Professional Development (self and reports) * Models operational excellence, visibly demonstrating leadership and technical expertise. Qualifications: To qualify for this position, an individual must possess the knowledge, training, experience and abilities required. Education and Training * Bachelor's Degree in mechanical engineering or equivalent Experience: * New graduate to 3 years experience Other: * Must be willing to work overtime as required. * International travel may be required. * Domestic travel may be required. * Local travel may be required. * Minimal travel may be required Skills: To perform the job successfully, an individual should demonstrate the following competencies: * Must have proficiency in MS office applications including spreadsheet, enterprise resource planning, database, and specialized application software. * Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site. * Strong written and verbal communication skills required. * Strong organization and time management skills. * Ability to successfully plan and implement objectives within established timelines and work schedules. * Ability to analyze problems and develop effective solutions at both strategic and functional levels. * Demonstrate behavior consistent with company values. * Ability to work independently, with minimal direction as a highly motivated self-starter and within a team oriented culture. * Exhibits polite and professional communication via phone, e-mail and mail. * Maintain strict confidentiality regarding company matters. * Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; completes tasks on time or notifies appropriate person with an alternate plan. * Proficient in engineering application software such as Autodesk Inventor; the ability to learn analytical software such as ANSYS, CFX, etc. * Maintain a collaborative relationship with internal and external stakeholders. * Demonstrates recognition of organization's requirements for the highest quality product with the most efficient utilization of labor and materials: consistently achieves schedule goals; displays initiative, focus, and sense of urgency; demonstrates flexibility in discharging multiple/changing priorities. * Obtains support and cooperation from others and reciprocates; demonstrates positive behaviors, displaying tact, respect, and understanding when dealing with others; proactively engages and confronts issues to achieve continual improvement. * Identifies and addresses potential safety issues including product testing related hazards at customer facilities, which are related to equipment and office area safety. * Ability to apply mathematical operations to such tasks as geometric tolerances and drawing interpretation. * Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. * Ability to define problems, collect data, establish facts, and draw valid conclusions. * Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements. * Adheres to safety and regulatory program requirements, policies, and procedures; promptly reports safety/health concerns; utilizes personal protective equipment as required; maintains organized, clean work environment. * Strong reasoning ability required to allow assessment of a broad range of customer requirements. * Ability to successfully plan, self-direct, and implement objectives within established timelines and work schedules. * Proficient in math including algebra and geometry for first level engineering calculations and pricing models required. Additional skills for engineering modeling desired. * Sound engineering judgement required to support customer-consulting tasks. * Customer Relationship Skills to establish technical scope, requirements, and technical corrective actions. * Ability to operate cross functionally within the organization and drive product improvements throughout the process. * Experience reading technical drawings desired with a drive to be detail oriented and willingness to learn specification requirements. * Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. * Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations. Ability to apply mathematical operations such as tasks as frequency distribution, determination of test reliability and validity, analysis. * Listens and gets clarification; ability to respond effectively to the most sensitive inquiries or complaints; writes clearly, correctly, and informatively; ability to read, analyze, and interpret the most complex documents; maintains confidentiality. * Proficient in presentation and communication to non-finance functional groups. * Able to manage multiple priorities and deadlines. * Strong analytical, organizational and communication skills are a must. * Ability to solve practical problems in a timely manner whilst dealing with a level of ambiguity. * Must be detail oriented with ability to maintain a strategic outlook. * Proactively identify problems and collaborate with management on implementing possible solutions. * Energetic and eager to tackle new projects and learn new skills. * Ability to keep information confidential. * Maintain current technical knowledge pertaining to position; demonstrates comprehensive, flexible range of skills and abilities; seeks to enhance skills and abilities through cross training and educational development. * High degree of accountability to meet commitments. * Ability to write detailed reports and correspondence. * Have basic knowledge of GD&T principal and working knowledge of a variety of machining processes. * Team skills, working with machinists and project engineers to develop, maintain, and improve processes are very important. * Ability to define problems, collect data, establish facts, and draw valid conclusions. * Ability to thrive in a team environment. Physical and Mental Demands The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. * Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure. * Work Environment This job primarily operates in a clerical office setting. This role routinely uses standard office equipment such as computers, phones, photocopiers and filing cabinets. While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration. Work Authorization/Security Clearance Must be able to work in the U.S without sponsorship. Ability to obtain US government security clearance is required. This job description is not all inclusive but rather serves as a general guideline of the current needs of the position and can be modified at the discretion of management to meet current business needs. Experience and education requirements are the primary basis for awarding this position, however substitutions that are essentially equivalent may be made as they relate to the essential functions, duties, and responsibilities of this position Salary Description $65,000 - $85,000

Job Description CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Seeking a detail-oriented Civil Field Engineer to lead on-site investigations, perform specialized inspections, and oversee material testing. This role involves managing projects from start to finish, conducting precise engineering calculations, and delivering accurate, timely reports that meet industry standards. Responsibilities Conduct specialized inspections and field evaluations, including soils, concrete, masonry, and steel material testing. Perform geotechnical investigations, such as test boring and test pit observations, supported by laboratory analysis and accurate geotechnical calculations. Collaborate with Senior Professional Engineers to execute a wide range of field and technical tasks. Prepare detailed engineering studies and comprehensive reports that meet project and regulatory standards. Coordinate and manage projects related to Special Inspections and Construction Materials Testing, ensuring timely delivery and quality outcomes. Implement rigorous Quality Assurance protocols, maintaining strict adherence to technical standards, codes, and best practices in both field and laboratory settings. Commit to professional growth through continuing education and maintaining current certifications. Qualifications Bachelor's degree in Civil Engineering or a closely related discipline. Engineer-in-Training (E.I.T.) certification required. Proficiency in Microsoft Office Suite (Word, Excel, Outlook) for documentation and reporting. Strong interpersonal skills with the ability to build and maintain effective relationships with managers, team members, and clients. Exceptional organizational and time-management abilities to handle multiple priorities efficiently. Knowledge of construction materials, procedures, and documentation is highly desirable. Valid driver's license and ability to travel to project sites as needed. Compensation: $24 - 30/hour Benefits CME offers competitive wages and benefits such as: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR aAAXGI0ew9

LaBella Associates is currently seeking a Transportation Project Engineer in our Rochester, NY, office location. The successful candidate must be technically astute in transportation and/or highway engineering and have a proven background in the development of transportation and/or highway projects. This role will often perform as a project manager on some assignments or project engineer on larger size projects.

Cannon Industries, Inc. A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers' standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: This individual must function as a technical project leader for the organization with the responsibility of expediting the process flow of jobs through the shop from post order entry to the shipment of the product to the customer. All work must be performed in a timely and cost-effective manner. In this role, the engineer is required to perform complex engineering and/or design tasks that require the development of new and improved techniques and procedures. Minimum Qualifications: Intermediate level professional Two years or more of professional experience in a manufacturing business environment Five years or more of manufacturing/sheet metal/welding fabrication knowledge CNC machining / programming background is a plus A.S. Degree in Engineering required; Manufacturing, Mechanical or Industrial Degree (B.S. preferred) Specific Duties: Responsible for all phases of the quoting process including; developing a Bill of Materials for purchasing to facilitate pricing inquiries, calculating material usage's, etc. Perform all phases of Project Management duties including cost estimating, manufacturing engineering, and working to ensure quality production and on time shipping of customer orders Create detailed drawings for flat blank layouts using CAD system Monitor actual job cost vs. quoted job cost Drive process improvements to generate cost reduction Help write the process sheets (Travelers) for the jobs Ensure all programs are updated with any modifications from the previous run Design machining, inspection and assembly fixtures Provide technical direction to operators as needed Measurement Tools: On time delivery to customers Quality performance Decrease in job setup time on turret, mills and lathes Cost savings for production; including tooling Project management and document control organization skills Have a “Team player attitude”, promote commitment and follow through This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Less than 2 years experience Basic knowledge of RFI trancing Contract document review Basic scheduling techniques Payment review and preparation Previous construction experience a plus Proficient in basic computer skills (Windows/Outlook/Word/Excel and scheduling applications.