Field service technician jobs in Albany, NY - 808 jobs

Job Title: Field Service Engineer II Onsite Reports to: Site Coordinator Classification: Non-Exempt This position entails the installation, service, troubleshooting and repair of complex electronic and electromechanical equipment, site service, field process applications, and qualifications. In addition, the position is accountable for being able to operate as an independent product expert on select EVG product lines. Capable of assisting in the implementation of detailed, complex customer installation plans for reliability, process qualification, and sign-off. Training customer personnel on advanced equipment operation, maintenance procedures and process related operations. Provides onsite technical support for development and implementation of equipment and process applications. Trains other Field Service Engineers on specific product lines. Essential Duties and Responsibilities: To perform this job successfully, the individual must be able to perform each of the primary duties satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Provides professional and courteous service to customers with a primary goal of complete customer satisfaction. Assists customers and other personnel in identifying and repairing equipment related process problems. Performs onsite preventative maintenance, clean equipment as required and verify the operational quality of equipment. Performs start-up, warranty, paid service, and service contract activities. Performs hardware set-up on specified systems within established time frames. Keeps Management informed of down situations. Documents, logs, and reports activities as required. Troubleshoots and corrects process variations on systems. Diagnoses sources of hardware or process problems on equipment, facilities, or wafers. Participates in local customer meetings and communicates orally with customers in face-to-face, one-on-one settings, group settings and communicates professionally by email and telephone, as needed. Prepares and submits all required paperwork on a timely, routine basis. Maintains all assigned equipment logs and records promptly and thoroughly. Records activities clearly in written pass down and communicates clearly face to face when handing work off to oncoming shift. Complies with all OSHA and Customer Safety requirements. Stays current all prescribed and recurrent training courses for EVG and Customer to maintain uninterrupted access to customer site. Works overtime and/or travel on short notice, including unscheduled callouts from home and other shifts, as needed. Must be able to travel domestically and internationally overnight, as needed, up to 20% of the time. Must possess a valid passport. This position requires the use of EVG hired vehicles on EVG business. Individuals must be physically capable of operating the vehicles safely, possess a valid drivers license and have acceptable driving privileges. Trains other Field Service Engineers on specific product lines and company software (timecards, expense reporting, drawings, parts) Assists and completes onsite equipment installations or complex retrofits on equipment and obtains Final Acceptance by the customer. Ability to utilize training skills to troubleshoot tools to resolve issues and minimize downtime. Keeps equipment running properly and efficiently to enhance customer satisfaction. Other duties, as assigned. Additional Duties and Responsibilities: Initiates purchase orders for parts and service. Maintains and performs repairs on company demo cleanroom equipment. Keeps informed and trained on companys most current systems, methods, and procedures, including site safety. Demonstrates excellent customer service skills (foreign and domestic). Exhibits good housekeeping practices in all work areas. Qualifications / Education / Skills and Experience: This position requires an associate degree or bachelors degree in a related engineering field plus two (2) years of experience or up to four (4) years of experience installing/repairing semiconductor/electronic production equipment. Advanced electromechanical troubleshooting skills. Knowledge of quality improvement process methods and terminology. Ability to identify and solve advanced process-related system problems. Ability to communicate and demonstrate professional conduct with all levels of customers, management, and coworkers. Must have advanced PC skills (Windows, MSOffice suite). Kepner-Tregoe Problem Solving and Decision Making training, preferred. Physical Demands: While performing duties of this job, individual is regularly required to stand, sit, reach with hand and arms, stoop, kneel, crouch, crawl and lift/move up to 50 pounds. Visual acuity required. Individual is required to use hands to finger, handle or feel objects, tools, or controls frequently and be able to reach with hand and arms above shoulder level occasionally. Ability to wear proper cleanroom attire and work inside the fab/cleanroom up to 75% of the time. This job description in no way states or implies that these are the only duties to be performed by the employee in this position. Employee will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. PIf6605c6a48fc-31181-38637964

We Are: Accenture Song-a new breed of agency that's all about the Experience. For us, customer experience is not an add-on; it's foundational to who we are and how we empower our clients. As the world's largest, most disruptive agency, we drive lasting growth for clients by helping them design, build, and run meaningful experiences that make people's lives better, more productive, and more meaningful. We do this in three ways: by transforming organizations through standout products and services; by building and delivering award-winning campaigns so brands can engage and communicate creatively with customers at scale; and by using our top-notch skills to pilot, integrate, scale, and run the platforms that underpin the world's greatest experiences. Visit us here to learn more about what makes us the Experience Agency. The digital economy has caused a massive increase in the amount and importance of digital content. Digital content and the customer experience it fuels are, together, a vital expression of a brand's voice and purpose. We help leading brands create and deliver the right content for the right customer at the right time for immersive, relevant experiences. We offer an end-to-end approach to the content lifecycle and cut through the complexity for improved speed to market and relevance, at scale. Our unique tools and services organize, store, and optimize content, including taxonomy, rights and asset management, analytics, and quality assurance. Job Description: We are looking for a highly effective field service capability technology Delivery Lead to join our Song team. An individual filling this role will be responsible for the overall success of field service technology focused Service Experience programs, focusing on the client relationship, financials, project delivery, resourcing, and overall program health. Ideal candidates will have a consulting background and will have experience managing programs that combine strategy, field service experience design, and technology architecture & delivery disciplines. The work: * Works in a highly client-facing role to lead the end-to-end delivery lifecycle of complex, global and large-scale Service solutions crossing customer channels and service center Backoffice service solutions. * Develops strong working relationships with the senior management team and identifies follow-on project opportunities * Plans and estimates delivery work with an Agile approach, focusing on project milestones, resource planning (both on-shore and off-shore), scope, budget, risk identification and mitigation planning * Manages day to day on-shore and off-shore project teams during the project lifecycle * Manages the project ideation, gathering the high-level business requirements, defining the detailed requirements and process into epics and stories * Manages experience-led teams in developing strategic vision and creative UI/UX design * Manages and contributes to development of the platform migration and global roll out strategy and execution * Interacts with client stakeholders for business justification, funding, scope and timeline * Contributes to the ongoing development of solution/program offering approaches, methodologies, techniques, business development tools, and growing our resources Travel: As required for client support. Location: Primary residency within 90 minutes of an approved Accenture office Qualification Basic Qualifications: * Minimum 7+ years of experience leading the successful delivery of Field Service platform architecture and delivery projects * Minimum 7+ years of experience delivering projects which have integrated one or more of the functional capabilities listed below: * Field service platform suites such as Salesforce, Oracle, Microsoft Dynamics, IFS, ServiceMax * Service Delivery enablement (field worker, 3rd party management) * Distributed Service support networks * AI powered service operations Bonus points: * Experience with Service Delivery Operations (Service Center, Call Center, Field Service Operations) * Minimum 5 years of experience with both Waterfall and Agile SDLC, implementing large, complex web sites, commerce applications or marketing automation platforms. * Experience with Service channel experience design, implementation and execution * Experience with defining, designing and implementing a development architecture leveraging CI/CD principles * Strong knowledge of project management methodology including the ability to develop detailed work plans and specifications, identify and resolve issues, manage risk, and run team meetings * Exceptionally strong leadership & communication skills to effectively manage client accounts and multidisciplinary teams * Experience in a consulting environment with demonstrated track record of continuing responsibilities, creativity, and innovation in a complex global scale program (e.g., multi-country, language, brand, etc.) * Experience working with clients in the CMT (Communications, Media, Technology) space * Bachelor's degree Compensation at Accenture varies depending on a wide array of factors, which may include but are not limited to the specific office location, role, skill set, and level of experience. As required by local law, Accenture provides a reasonable range of compensation for roles that may be hired as set forth below. We accept applications on an on-going basis and there is no fixed deadline to apply. Information on benefits is here. Role Location Annual Salary Range California $94,400 to $266,300 Cleveland $87,400 to $213,000 Colorado $94,400 to $230,000 District of Columbia $100,500 to $245,000 Illinois $87,400 to $230,000 Maryland $94,400 to $230,000 Massachusetts $94,400 to $245,000 Minnesota $94,400 to $230,000 New York/New Jersey $87,400 to $266,300 Washington $100,500 to $245,000 #LI-NA Locations

Service Technicians are the heart of our industry. Our technicians work in a safety-first type of environment and don't mind heights or working on mechanical parts. Service Technicians are responsible for performing field maintenance, routine inspections, preventative, and complex repairs requiring strong electrical and mechanical troubleshooting background. Why Work for Crane 1 Pay: $40-$50/hr Time and a half for any work on Saturday Double time pay for any work on Sunday Company Truck, cell phone, boot program, PPE provided Rapid Quote (Bonus Incentive Program) Benefits Day 1: Medical, Dental, & Vision Advancement: Training program into Sales or Management Referral Bonuses up to $2500 Employee-centric: 401K match program, vacation 80 hours year 1 / PTO, tuition reimbursement Service Technician Role & Responsibilities Perform maintenance, inspection, and repairs on overhead cranes within the allowed hours without compromising safety or quality. Perform spot checks to ensure the highest level of quality & workmanship. Working knowledge: electromechanical troubleshooting (480V, 3-phase motor control, VFD, AC/DC). Working at heights & some heavy lifting. Document findings and make consultative recommendations regarding the repair and safety-related concerns to the customer for the inspected equipment. Provide proper checklists and required forms and with customer signatures for all inspection or service-related documentation. Other duties as assigned. Service Technician Required Skills and Experience KNOWLEDGE: A minimum of (5-7) years of manufacturing/industrial electrical /mechanical equipment repair experience. SKILLS: Thorough knowledge of electrical theory for power and controls. Thorough knowledge of the mechanical systems of cranes/hoists. Thorough knowledge of simple structural elements Understanding of the OSHA/ANSI standard (is required) The position requires 8 to 12-hour shift work, which can include Saturdays and Sundays. Ensure we maintain a professional, safe, productive, and compliant work environment. ABILITY: A passion for providing top-notch customer service to our customers. Valid driver's license and ability to meet our driving requirements. Occasional varied overtime as required by the customer and be available for “on-call” as part of the site requirements. Equal Employment Opportunity (EEO) Statement Crane 1 Services is an equal opportunity employer. We are committed to creating a diverse and inclusive workplace where all qualified applicants are considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status in accordance with applicable federal, state, and local laws. We believe in fostering a supportive environment where every employee is valued and given the opportunity to succeed.

HoSt Bio-Energy Systems is seeking a Field Service Technician to join our team! Join us at HoSt Bio-Energy Systems, where your expertise will not only maintain the integrity of our operations but also contribute to a cleaner and more sustainable future. If you are passionate about maintenance engineering and eager to take on new challenges, we would love to hear from you. Key Details: Pay: $90,000 - $120,000/year DOE Location: Various job sites + some WFH Travel: 50-80% throughout the US and Canada Benefits: Employer-paid Health Insurance; 401k Program with 4% Match; Paid Vacation & Sick Leave; Flexible Spending Accounts; Short-term and Long-term Disability Insurance; Life and AD&D Insurance; Employee Assistance Program Why Work Here: Join a company where sustainability is not just a goal but a fundamental guiding principle embedded in our mission and operations. Play a role in closing the loop on waste, minimizing emissions, and transforming waste products into valuable resources, which is good for business and the planet. Enjoy ample personal and professional development opportunities in a dynamic and expanding global market. Work with experienced professionals dedicated to making a difference in sustainable energy. Who We Are: At HoSt Bio-Energy Systems, our commitment to sustainability is at the core of everything we do. We are a global leader in providing cutting-edge, environmentally friendly energy solutions that empower businesses and communities to embrace a cleaner, greener future. Our mission is to drive the transition to a low-carbon, circular economy by harnessing the power of renewable resources. We specialize in developing, designing, and constructing state-of-the-art Bio-Energy systems that convert organic waste and biomass into valuable resources, including biogas, green heat, and sustainable electricity. With a relentless focus on innovation, we create tailored solutions that meet the unique needs of our clients and address pressing environmental challenges. W ant to learn more? Check out our website: ********************************************************** Who You Are: You possess a diverse skill set tailored for success in dynamic environments. Your strong organizational skills allow you to manage tasks and prioritize responsibilities amidst varying demands effectively. Your adeptness in language and mathematical skills ensures clear communication and precise problem-solving abilities. With a proactive and results-oriented approach, creative problem-solving, and analytical capabilities, you can thrive as a valuable team member, adeptly navigating challenges and driving successful outcomes in the field. Additional qualifications include: 3-5 years of mechanical and electrical experience, preferably in a similar industry. Strong technical aptitude and problem-solving skills. Heavy mechanical experience or experience building/rebuilding engines and/or compressors. Knowledge of biogas systems and related equipment is a plus. Excellent communication and customer service skills. Ability to work independently and as part of a team. Willingness to travel frequently and adapt to changing schedules. What You'll Do: The Field Service Technician holds complete accountability for the safe and successful completion and of corrective and routine maintenance of installation projects. This role involves performing preventative and corrective maintenance on biogas installations and diagnosing, analyzing, and rectifying product failures, ensuring optimal performance and uptime for our clients. It requires a combination of mechanical and electrical expertise, a highly flexible approach, and a willingness to travel to client sites as needed. Responsibilities include, but are not limited to: Conduct routine maintenance inspections on biogas equipment and systems Diagnose and troubleshoot mechanical and electrical issues Perform repairs and component replacements as necessary Coordinate with clients to schedule maintenance visits and minimize downtime Document work performed and maintain accurate records of service activities Provide technical support to clients, addressing inquiries and resolving technical challenges related to bioenergy system operation and maintenance. Verify hardware and software controls for optimal performance. Participate in the 24/7 emergency support team to address critical safety or productivity issues. HoSt offers 24/7 service response to our clients. As a member of the team, this role may involve on-call availability and work outside of normal business hours based on client and project needs. Apply Now: At HoSt Bio-Energy Systems, sustainability isn't just a goal; it's our way of life. We invite you to join us in our mission to create a brighter, cleaner, and more sustainable future for all. Let's work together to explore the possibilities of Bio-Energy Systems and discover the untapped potential of renewable resources. Together, we can drive change, reduce environmental impact, and leave a lasting legacy for generations to come. HoSt is an Equal Opportunity Employer; we celebrate diversity in the workplace and strive to maintain an inclusive work environment for all employees.

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. Job Posting External Job Duties Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. Perform all assigned planned maintenance on customer lift trucks. Maintain a service van and its inventory. Process paperwork after completion of each job. Minimum Qualifications Less than 2 years related experience High school diploma or equivalent Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. Good written/verbal communication and customer care skills. Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. Industry related training is preferred Ability to read and understand service manuals, plan, and follow-through Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees. Current benefits being offered include: Competitive Wages. The anticipated starting pay range for the position is $25 to $30 but is commensurate with skills and related experience, Health/Dental/Vision/Prescription Drug Plan with a company contribution to each, Health Savings Accounts and Flexible Spending Accounts, 401K Retirement Savings Plan: Crown matches 100% of the first 4% of your eligible pay you contribute to the plan. You are always 100% vested in the company matching contributions. Company paid Life and Disability Benefits as well as optional supplemental term life insurance offerings, Paid Parental Leave, 9 Paid Holidays, Paid Vacation accrued at a rate based on length of service and position, Paid Sick Leave, Birthday Pay for Non-Exempt employees, Tuition Reimbursement up to $5,250 per calendar year, and much more. EOE Veterans/Disabilities

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military

Based out of Granbury, Texas, BC Tech Pro partners with techs all over the country to complete on-site hardware warranty services in their territories. If you love working on computers and want to get out from behind a desk, come work with us! Job Description This is a Computer Field Technician Position doing hardware repairs and installations on laptop and desktop units. To be successful in this position, you must have prior experience with laptop and desktop hardware. Job Details: This is a 1099/per call position Pay is based solely on the number of calls completed. Calls start at $35 and go up based on distance traveled Pay period: Every Friday after the first week worked Tickets are run Monday-Friday during the day shift. Candidates must be regularly available a minimum of 3 weekdays to be considered. Call volume is variable but is usually 2-5 calls per day You will complete certifications from Dell and Lenovo as part of your onboarding. Certifications are online and free to you. You must have a reliable form of transportation and a valid driver's license to run these calls. You will be visiting multiple work sites throughout your day. You must have access to a computer and the Internet to log onto your portal each day. You must be available to log into your tech portal each morning you are working by 9 am to code your calls and map out your route for the day. The manufacturer has completed troubleshooting and shipped a part prior to your ticket being issued to you. You will confirm service times with the customer in your tech portal. Services will be completed at the customer site (residential and commercial) You will pick up parts daily from the assigned Fed Ex or UPS store for your territory before going onsite. Once all calls are completed for the day drop off the old parts with the pre-paid label that is provided. Qualifications Must have prior hands on experience with replacing components on laptops and desktops Must have a valid driver's license and reliable transportation Must be comfortable with daily local travel Additional Information All your information will be kept confidential according to EEO guidelines.

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Role Summary This position is for a hands-on Field Service Technician who will support Rivian vehicle repairs. The role requires a collaborative, team-oriented individual capable of working in a dynamic, fast-paced environment. While the role is based in a primary location, it may require operating remotely or traveling to various locations, including the production plant, to provide vehicle support as business needs demand. This job description outlines the full spectrum of skills required, and candidates will be assessed against this spectrum to determine the appropriate level for their expertise. Responsibilities Perform or assist with assigned vehicle diagnosis, repairs, installations, and inspections, whether at a service center or in the field directly at customer homes, businesses, or other convenient locations. Identify and explain the Rivian product line, EV framework, tools, and accessories. Utilize available technical resources to follow Rivian repair procedures efficiently without compromising quality or safety. Conduct road tests to ensure the quality of repairs. Manage necessary parts operations, including ordering, receiving, shipping, and inventory. Identify areas of improvement and provide feedback to senior technicians or leadership. Support service campaigns and containment initiatives. Ensure that all work and technical notes are properly documented for internal and external use. Work collaboratively with a team spirit and maintain high-quality work with minimal supervision. Communicate with a high level of professionalism in customer-facing situations. Stay current with technical skills and complete required training. Qualifications High School Diploma or GED is preferred. Proficient in using hand tools and power tools. Must be at least 21 years old. Must possess a valid driver's license and maintain a clean driving record, with no driving-related suspensions or revocations within a 3-5 year period. Ability to drive a non-commercial truck and trailer is preferred. Must be available for a 40-hour work week, which may include weekends, holidays, and shifts during early morning, evening, or overnight hours based on business needs. Proficient with laptops or computers in Windows or Mac environments. Strong organizational skills, attention to detail, and an eagerness to learn. Ability to perform physical tasks such as lifting up to 50 lbs., sitting, standing, walking, and frequent use of hands for grasping tools and data entry. Physical exertion may be required to perform occupational tasks (sitting, standing, walking, bending, kneeling, carrying, reaching, pushing, pulling, and lifting up to 50 lbs.). Ability to read and speak fluent English. Ability to see, read and interpret documents such as governmental regulations, safety rules, operating and maintenance instructions or schematics. This role may require regular interaction with customers and their families, 3rd party affiliates, and suppliers within Rivian facilities, on mobile service routes, or at community outreach events. Experience: Hands-on work experience in an automotive shop is highly preferred. However, if you are a recent automotive graduate looking for your next opportunity, we encourage you to apply. This role is open to various levels of experience, from entry-level to career technicians A background in electric vehicle (EV) or hybrid repair is considered a plus. Experience in start-up environments is preferred. Experience with parts departments, billing, and work order management systems is preferred. Spectrum of Technical Skills Low Voltage & Electrical Systems: Technicians should have a foundational understanding of basic electricity theory and be able to safely use a DVOM for various circuit measurements. Proficiency should extend to reading and leveraging electrical schematics as a diagnostic resource. Advanced candidates will demonstrate a deep understanding of automotive electronics, including CAN and LIN networks, and possess the ability to diagnose complex faults and perform wiring repairs according to manufacturer standards. High Voltage Systems: A core requirement is understanding the risks involved with high voltage systems and the ability to safely power them down and work on them using appropriate personal protective equipment (PPE). This includes understanding the function of various high voltage components and their monitoring systems. Highly skilled technicians will be capable of diagnosing complex high voltage faults related to charging, isolation, and interlock loop issues using the manufacturer's diagnostic processes. Chassis, Brakes & Suspension: Technicians should be proficient in fundamental chassis service, including the ability to mount and balance tires, perform vehicle alignments, and replace brake system components. The role requires the ability to diagnose mechanical suspension components and progress to repairing advanced vehicle dynamic issues related to traction control, ABS, and power steering. Top-tier candidates will be adept at resolving complex drivability concerns such as Noise, Vibration, and Harshness (NVH). Thermal Systems: Technicians must be able to service vehicle thermal systems, starting with the ability to perform a coolant drain-and-fill and safely handle refrigerant with a 609 certification. A comprehensive understanding of the entire A/C system and its components is expected. An ideal candidate can proficiently use an A/C machine and diagnose a range of thermal system concerns, including issues with coolant systems, air conditioning performance, and HVAC systems. Advanced Driver Assistance Systems (ADAS): A working knowledge of ADAS is required, beginning with a basic understanding of the features and their operation. Technicians will be expected to replace system components and perform necessary calibrations. Advanced understanding includes knowing the functionality and limitations of the complete ADAS system and the specific roles of its various sensors. Body & Glass: The role includes responsibilities related to the vehicle body, from assisting with glass removal and installation to safely replacing windshields and other glued body fixtures. Technicians may be tasked with adjusting body panels to specified tolerances and should be capable of diagnosing and repairing issues such as wind noise and water leaks. Pay Disclosure The hourly range for this role is $28.13 - $57.03 for New York based applicants. This is the lowest to highest salary we in good faith believe we would pay for this role at the time of this posting. An employee's position within the salary range will be based on several factors including, but not limited to, specific competencies, relevant education, qualifications, certifications, experience, skills, geographic location, shift, and organizational needs. The successful candidate may be eligible for annual performance bonus. We offer a comprehensive package of benefits for full-time and part-time employees, their spouse or domestic partner, and children up to age 26, including but not limited to paid vacation, paid sick leave, and a competitive portfolio of insurance benefits including life, medical, dental, vision, short-term disability insurance, and long-term disability insurance to eligible employees. You may also have the opportunity to participate in Rivian's 401(k) Plan and Employee Stock Purchase Program if you meet certain eligibility requirements. Full-time employee coverage is effective on their first day of employment. Part-time employee coverage is effective the first of the month following 90 days of employment. More information about benefits is available at rivianbenefits.com. You can apply for this role through careers.rivian.com (or through internal-careers-rivian.icims.com if you are a current employee). There is no fixed deadline for this application; applications are accepted on an ongoing basis until the role is filled or the opening is no longer needed. Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. High School Diploma or GED is preferred. Proficient in using hand tools and power tools. Must be at least 21 years old. Must possess a valid driver's license and maintain a clean driving record, with no driving-related suspensions or revocations within a 3-5 year period. Ability to drive a non-commercial truck and trailer is preferred. Must be available for a 40-hour work week, which may include weekends, holidays, and shifts during early morning, evening, or overnight hours based on business needs. Proficient with laptops or computers in Windows or Mac environments. Strong organizational skills, attention to detail, and an eagerness to learn. Ability to perform physical tasks such as lifting up to 50 lbs., sitting, standing, walking, and frequent use of hands for grasping tools and data entry. Physical exertion may be required to perform occupational tasks (sitting, standing, walking, bending, kneeling, carrying, reaching, pushing, pulling, and lifting up to 50 lbs.). Ability to read and speak fluent English. Ability to see, read and interpret documents such as governmental regulations, safety rules, operating and maintenance instructions or schematics. This role may require regular interaction with customers and their families, 3rd party affiliates, and suppliers within Rivian facilities, on mobile service routes, or at community outreach events. Experience: Hands-on work experience in an automotive shop is highly preferred. However, if you are a recent automotive graduate looking for your next opportunity, we encourage you to apply. This role is open to various levels of experience, from entry-level to career technicians A background in electric vehicle (EV) or hybrid repair is considered a plus. Experience in start-up environments is preferred. Experience with parts departments, billing, and work order management systems is preferred. Spectrum of Technical Skills Low Voltage & Electrical Systems: Technicians should have a foundational understanding of basic electricity theory and be able to safely use a DVOM for various circuit measurements. Proficiency should extend to reading and leveraging electrical schematics as a diagnostic resource. Advanced candidates will demonstrate a deep understanding of automotive electronics, including CAN and LIN networks, and possess the ability to diagnose complex faults and perform wiring repairs according to manufacturer standards. High Voltage Systems: A core requirement is understanding the risks involved with high voltage systems and the ability to safely power them down and work on them using appropriate personal protective equipment (PPE). This includes understanding the function of various high voltage components and their monitoring systems. Highly skilled technicians will be capable of diagnosing complex high voltage faults related to charging, isolation, and interlock loop issues using the manufacturer's diagnostic processes. Chassis, Brakes & Suspension: Technicians should be proficient in fundamental chassis service, including the ability to mount and balance tires, perform vehicle alignments, and replace brake system components. The role requires the ability to diagnose mechanical suspension components and progress to repairing advanced vehicle dynamic issues related to traction control, ABS, and power steering. Top-tier candidates will be adept at resolving complex drivability concerns such as Noise, Vibration, and Harshness (NVH). Thermal Systems: Technicians must be able to service vehicle thermal systems, starting with the ability to perform a coolant drain-and-fill and safely handle refrigerant with a 609 certification. A comprehensive understanding of the entire A/C system and its components is expected. An ideal candidate can proficiently use an A/C machine and diagnose a range of thermal system concerns, including issues with coolant systems, air conditioning performance, and HVAC systems. Advanced Driver Assistance Systems (ADAS): A working knowledge of ADAS is required, beginning with a basic understanding of the features and their operation. Technicians will be expected to replace system components and perform necessary calibrations. Advanced understanding includes knowing the functionality and limitations of the complete ADAS system and the specific roles of its various sensors. Body & Glass: The role includes responsibilities related to the vehicle body, from assisting with glass removal and installation to safely replacing windshields and other glued body fixtures. Technicians may be tasked with adjusting body panels to specified tolerances and should be capable of diagnosing and repairing issues such as wind noise and water leaks. Perform or assist with assigned vehicle diagnosis, repairs, installations, and inspections, whether at a service center or in the field directly at customer homes, businesses, or other convenient locations. Identify and explain the Rivian product line, EV framework, tools, and accessories. Utilize available technical resources to follow Rivian repair procedures efficiently without compromising quality or safety. Conduct road tests to ensure the quality of repairs. Manage necessary parts operations, including ordering, receiving, shipping, and inventory. Identify areas of improvement and provide feedback to senior technicians or leadership. Support service campaigns and containment initiatives. Ensure that all work and technical notes are properly documented for internal and external use. Work collaboratively with a team spirit and maintain high-quality work with minimal supervision. Communicate with a high level of professionalism in customer-facing situations. Stay current with technical skills and complete required training.

Milton CAT is seeking an experienced Power Systems Field Service Technician to perform marine, industrial engine, and power generation repairs and maintenance. Depending on the location and assignment, the technician will be responsible for some or all of the functions and duties listed below. These repairs may require working hours in addition to the normal work schedule for emergency calls or routine service as required. Flexibility and in-depth product knowledge are necessary for this position. Milton CAT offers challenging career opportunities, extensive training and employee development along with an opportunity to grow your career and thrive under our reputation for excellence. Whether you're looking for a steady job with great benefits, or an exciting place to start your career and grow within the organization, Milton CAT can meet your needs! We offer excellent benefits and supply you with the tools you need to maximize your potential. Pay Rate: Starting wage of $37.43-$40.69 an hour based on location and experience. This is a union position. Benefits include: Paid Time Off + 8 company paid holidays Medical, Dental and Vision insurance options for Employee and Family Disability & Life Insurance Packages Competitive Retirement Plan Tuition Reimbursement - available to FT employees with 1 year+ of service Additional supplemental offerings and discount programs Employee Referral Program Responsibilities Removes, disassembles, assembles, and installs components and parts. Identify the problem and cause of failure through logical troubleshooting steps. Determines reusability of parts in accordance with published Caterpillar reusability guidelines. Orders replacement parts ensuring that parts ordered are correct and complete at time of order. Cleans, repairs, reconditions, and maintains engines, generators and components. Tests, measures, and adjusts engine and power system components. Prepares, inspects and operates engines and generators prior to completion. Keeps up to date with developments in tooling, technologies and systems. Prepares inspection and appraisal reports. Prepares accurate and complete service reports timely. Maintain a professional and proper personal appearance at all times adhering to company policy. Flexible to work after hours when needed to meet customer needs. Performs related duties as assigned. Qualifications To perform this job successfully an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and ability required. High school diploma or (GED) equivalent. 3-5 years' experience on CAT engines/power systems or similar equipment Ability to diagnose and repair CAT power systems equipment and components in the field. DOT certification required. Proficient in the use of a computer and related software (Word, Excel, etc.). Strong problem-solving skills and be detailed oriented with a high level of accuracy. Ability to operate a service vehicle. Valid driver's license and a safe driving record. Operates and maintains field service vehicle with GVW of less than 26,000 lbs. Basic math skills. Able to lift up to 50 pounds. Ability to perform duties with a sense of urgency, exceeding customer expectations. Ability to work with minimal supervision. Must be able to work in a dynamic, fast paced service environment. Maintain a tool inventory sufficient to perform assigned tasks. CDL A or B a plus. This job description is not intended to be all-inclusive. Your supervisor may request and assign you similar duties. Resumes that are mailed, emailed or hand-delivered to Milton CAT or any employee will not be considered. You must apply online. A background check and drug testing are required as part of our pre-employment process. Milton CAT is an equal opportunity employer that values the strength diversity brings to the workplace. We encourage applications from individuals with disabilities, minorities, veterans, and women. Applicants receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, sexual orientation, gender identity, handicap, disability, veteran status, genetic data, or other legally protected status. We base all employment decisions to further this principle of equal employment opportunity. VEVRAA Federal Contractor. EEO/AA employer.

OPEX Corporation is currently looking for a full time Field Service Technician. The worker will have a high exposure level to customer service as they will be responsible for visiting our current clients to help solve their technical issues. Responsibilities: This position is responsible for the day to day maintenance, troubleshooting and repair of mail opening, document scanning and/or material handling equipment Installing and setting up new equipment Interact with the customer to determine the problem Completing field service reports Keeping the customer informed as repairs are made and answer any question that may arise. Interact with management as well as other personnel to analyze and correct any equipment performance issues. Completing and submitting weekly online timecards and expense report Qualifications: Associate's Degree in Electronics and/or equivalent hands-on job experience. Must have excellent customer service skills. Possessing a driver's license, insurance and a reliable vehicle. Ability to lift at least 25 pounds independently. Ability to maneuver a job site, including small spaces in around our equipment. Physical/Work Environment: Due to our large variety of clients worker could potentially conduct work in an office or warehouse environment Commuting for an extended period of time throughout duration of shift Must have the ability to lift heavy machine parts while on duty Ability to maneuver a job site, including small spaces in around our equipment Squatting, bending, kneeling, reaching overhead, reaching forward will occur while on the job Hourly Rate: $23-27/hr, depending on experience

Field Service Engineer Salary Range: $90k to $100k Our client is seeking a Sr. Field Service Engineer that is bilingual in Japanese for a direct hire role. There is mandatory overseas training will be required in the winter time (Januaray or Feburuary 2026) Overview This engineer position for our client is responsible for providing field service engineering activities to Company customers independently. This position troubleshoots more complicated products and problems. Essential Job Functions Field Service Engineering Receives service calls from customer. Determines customer need or problem and responds accordingly. May provide over-the-phone consultation and advice to customer, may need to respond to emergency customer situation or may schedule and repair Company's products at customer site. Performs preventative maintenance on Company products. Establishes and manages a local maintenance service Requirements for the Role: 2- 5+ years of professional engineering experience Hands on engineering experience; Engineering for semiconductor (installation, maintenance, repair) Working experience with hand tools, oscilloscope, digital voltmeter, etc. Bachelor's Degree College graduate degree in Electrical, Electronics, Manufacturing, Mechanical, Physics, Materials Science, Computer Engineering

Purpose: The Field Service Supervisor works to plan, organize, direct, and forecast for the field service team. This includes having a proactive approach to find new customers and increasing revenue for the company. Establishes relationships, leads, and communicates with the customers. Management of the technicians and lead are essential to the job. Core Responsibilities: •Plans, organizes, directs, and forecasts for the field service department to support USB customers and channel partners. •Follows policies and procedures, making sure to document development goals and achievements. •Works to grow the business by taking proactive approaches to find new customers. •Makes data driven decisions and works with variable costs to increase revenue. •Acts as a relationship builder for the department and with customers. •Deals with the interfacing of large customers when needed. •Provides technical support to customers when complaints arise. •Develop procedures and work instructions associated with field service team responsibilities. •Works with the lead to plan and schedule the field service team's agenda to ensure there is coverage when and where it is needed. •Ensure documentation is compiled, correct, and timely for all service work completed. •Works with the Sales Team, performing plant walk downs and coordination of commissioning and turn key installations. •Occasionally cover field service work when the schedule is full and unplanned jobs must be completed. Qualifications & Requirements: •Associate's degree, required, in a technical field, preferred. •Experience in mechanical, electrical, and trade fields, preferred. •Power Generation Plant Operations Coursework/Training preferred. •Demonstrated ability to lead a group and direct subordinates to accomplish tasks required. •Ability to read electrical schematics and piping & instrumentation diagrams required. •Excellent computer skills including Microsoft Word, Excel, PowerPoint, and Outlook. •Experience in budget planning, forecasting, and administrative categories. •Experience and exposure in instrumentation and controls. •Possess supervisory, organizational, and leadership skills. •Ability to travel 25% of the time Desired Characteristics: •High level of motivation to complete tasks and drive the success of the team. •Proficient communication skills, both verbal and written, to accurately describe problems and communicate with customers and cross-functionally within the organization. •High degree of flexibility. •Strong critical thinking and problem-solving skills with a left-to-right mentality. •Positive Ability to work effectively with colleagues and achieve shared goals. •Attention to details and accuracy in completing paperwork.

Founded in 2009 and headquartered in Ann Arbor, MI, TEKWISSEN™ provides a unique portfolio of innovative capabilities that seamlessly combines clients insights, strategy, design, software engineering and systems integration. Our tightly integrated offerings are tailored to each client's requirements and span the services spectrum from Application Development/Maintenance, testing, Technology Consulting & staffing. The company is primarily focused on information technology, engineering, healthcare, financial technology and contingent workforce solutions. It operates in seven business segments including Commercial, Professional & Technical, EMEA Commercial, and EMEA Professional & Technical. The company provides professional and technical expertise in the fields of Telecom, Education, Banking, Retail, e-commerce, Automotive, Life Science, Insurance, legal, healthcare, among others. It also offers outsourcing, consulting, recruitment, career transition, and vendor management services. Job Description Hi , I am Narendra (technical recruiter ) always look for a potential candidates like you Below is the requirement with our direct client. Let me know if you interested and available for the project. Job Details: Title: Desktop Support/Field Service Technician/Computer Driving Technician. Location:Alabany, NY, We hire for many locations in US) Type of Job: Long term Contract/Contract to permanent Job Role/Duties: • If a driving job to various location of the customers from the pickup parts location which is the location mentioned in the job. • Need to visit both business offices and houses to repair/troubleshoot/Break-fix Computer/Desktops/Laptops/Printers. • You need to use your own car to travel in the job to provide service to the customers. • You will be working mostly for Dell products - (So previous experience will be Plus). • You will be traveling in the radius of 50 to 70 miles from the Pickup parts location. • Need to be very professional at work in the way of speaking and the attire. • You have to be ready for an overtime work and extensive driving (300 miles per week) Required Skills: • A+ Certification is mandatory (Training/expired status is also accepted.) • Dell or any product manufacture certification is a plus. • Good experience working on Laptops and desktops is mandatory • Good experience on Break/Fix is required IMPORTANT POINTS • Once the job is offered you have to undergo background check process along with the driving record. • You need to take the Dell certifications training (Online) and complete the certifications.- free • You have to be ready for contract agreement with the terms and conditions of the company • Pay will be paid biweekly for the hours approved. • Mileage will be reimbursed - contact me to speak about it. • You need to plan for your backup vehicle if your car breaks down. Pay Details/Other details: • We have standard pay rate and good mileage reimbursement. • We are looking for commitment technicians who can be an asset to the company • It takes 48 hours to get a feedback for every job you apply. • Mention the best time to call you while you are sending your profile. Thanks & Regards, Narendra Varma Technical Recruiter Qualifications A+, CAR WITH VALID DRIVING LICENSE AND INSURANCE Additional Information

Are you a skilled mechanic or technician looking to take your career to the next level? Kinsley Power Systems is hiring Field Service Technicians to service stand-by generators throughout the Northeast. If you have experience with engines, electrical systems, or heavy equipment-especially in automotive, trucking, marine, or construction-you may already have what it takes to thrive in this role. We offer specialized training to help you transition into the power generation industry and build a long-term, rewarding career. Kinsley Power Systems, a family-owned business, has been a trusted leader in generator service, sales, and rentals for over 60 years. We're committed to exceeding customer expectations in a workplace that's both enjoyable and supportive-where your hard work is recognized and your growth is prioritized. Key Responsibilities and Preferred Experience: Performing preventative maintenance and repairs on standby generator systems (Ranging from 8kW-1mW) Troubleshooting, diagnostic testing, load-bank testing and start-ups on generators Preparing accurate quotes for repairs and completing/submitting work orders Previous experience working on residential or industrial generators Exceptional communication and customer service skills The ability to participate in an on call, rotating schedule Must provide your own tools (multi-meter, hand-tools, etc.) Very safety focused with an OSHA 10 (or the ability to attain one) Valid DOT Card (or the ability to attain one) and a valid driver's license Benefits: Competitive pay and PTO to keep your work-life balance in check Full health benefits package (Medical, Dental, Vision, etc.) + 401(k) with match Company-paid certifications and specialized training to grow your skills Company vehicle and gas card so you're always ready to roll Uniforms provided, plus annual boot and uniform stipends Real advancement opportunities-grow your career with a team that wants to see you succeed A chance to work alongside some of the best technicians in the industry in a company that feels like family All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. Salary Description $22-45/hour

Job Description About Sungrow: Sungrow Power Supply Co., Ltd. (Stock code: 300274) is a globally recognized renewable energy company, specializing in R&D, manufacturing, and services for solar, wind, energy storage, hydrogen, and electric vehicle solutions. Established in 1997, Sungrow is known for its innovative photovoltaic inverters, wind converters, EV chargers, energy storage systems, and hydrogen production technologies. Its products are sold in over 180 countries, with a cumulative installed capacity exceeding 740 GW by the end of 2024. Sungrow has contributed to national standards and holds numerous core technologies. With multiple industry awards and advanced R&D centers, it ranks among the global leaders in clean energy. Guided by its mission “Clean power for all,” Sungrow continues to drive innovation and global sustainability. The Position: This role supports areas of field Service operation within Sungrow USA related to commissioning, warranty, and Operations and Maintenance (O&M) of the expanding installed sites in the region. Reporting to the regional field service supervisor, this position is responsible for troubleshooting, repairing, maintaining, and commissioning support of PV inverters and ancillary equipment/ systems, usually at the customer's site or at a staging yard/warehouse. This position will comply with the Safety Mandate, “ZERO HARM,” to ensure safe and efficient work and operation of the facility for all personnel and equipment. Ensures that personnel and safety issues are given priority to maintaining a safe and efficient working environment. Implements and enforces safety management policy and procedures regarding the facility: safety information, hazard analysis, safe operations/Maintenance Training, subcontractor compliance, plant integrity, work permits, emergency planning, and response. Duties and Responsibilities: Perform a variety of technical assignments involving the installation, operation, testing, and maintenance of string and central solar inverter and/or BESS Systems, PCS, batteries, and ancillary equipment. Perform general troubleshooting and diagnosis under Sungrow's maintenance and repair guidelines. As needed, support and perform pre-commissioning (with and without grid emulator) and commissioning of solar inverters and BESS systems within schedule and work plans Additionally, for those on O&M capacity, perform Preventive Maintenance and other Long Term Service Agreement (LTSA) activities per the contract Investigate solar plant issues such as DC array grid faults, inverter design issues, and utility grid transients. For BESS positions, these investigations may also involve SOC checks and module /component-level troubleshooting, replacement of electrical/electronic parts, SW version updates, etc. Provide feedback to the engineering and project team on possible mechanical and electrical design improvements. Lead upgrade/rework projects (software and hardware) in the field and interact with customers to explain the project's technical scope and manage work schedule and commitments. Work with customer SCADA engineers to set up systems communication and parameters involving Sungrow's controllers and F&G systems as needed. Accurately describes troubleshooting sequences and procedures which they have observed Identifies and documents basic mechanical and electrical issues and problems Performs basic corrective maintenance Create/modify Field Service procedures for safety troubleshooting and maintenance if required. When using contractors on sites, act as the Lead to ensure the contractors submit daily activity reports and JSA reports and work follows Sungrow standards and expectations. Prepare and submit own Daily Activity Reports and Daily JSA Reports. Work independently in the field and with Design Engineers to resolve high-level technical issues, support the investigation of the root cause for technology applications for complex projects Coordinate and work closely with other engineering, logistic, financial, and program management disciplines to maintain the solar plant operations. Verify and comply with engineering documentation standards and test procedures. Completes documentation in a timely and organized fashion Follow level-appropriate standard operating procedures. Own creation and submission of all field paperwork and documentation for full compliance with site documentation and project requirement Serve as a safety second if needed. Education or Desired License and Certificates: Associate's Degree in an Engineering or Computer Science Discipline from an accredited university or college Renewable industry experience is desired Power Electronics experience is desired OSHA 10 certificate within 12 months of date of hire NFPA 70e certificate within 12 months of date of hire Competencies: Strong demonstration of workplace safety practices Understands and follows a Safety Plan Comprehend Job Hazard Analysis and conduct level-appropriate Job Hazard Analysis Designated as Authorized Person for LOTO Compliant with environmental safety requirements Can utilize and inspect appropriate safety and fall protection equipment Minimum Requirements: Proficient in the use of Microsoft Office, including Word, Excel, Outlook, PowerPoint Motivated self-starter with complex problem-solving abilities. A ‘completer-finisher' taking accountability for ideas from inception to delivery in an environment that requires robust metrics to confirm the success. Excellent verbal and written communication skills and the ability to interact professionally with a diverse group of partners, senior managers, and subject matter experts. 3 plus years of overall experience in a technical field 2 years of experience in solar inverters or BESS Must possess the ability to work with test equipment and hand tools as required. Must be able to closely follow instructions and pre-established procedures/SOP to perform the ductions of the job Must be proficient in Microsoft Office Suite (Word, Excel, PowerPoint and Outlook) OSHA, NFPA70A, Electrical Safety Experience and/or certification with MV transformers a plus Travel: 80% Plus Work Location and Status: Contract-to-Hire, NY area No visa/legal sponsorship Compensation: Compensation commensurate with experience Competitive benefits package and employee programs Strong personal and company growth opportunities For candidates in the states of California, Colorado, New York and Washington, the anticipated base pay for this role is between $36 to $40 per hour plus OT. This range does not include any other compensation components or other benefits that an individual may be eligible for. The base pay offered is dependent upon several factors, including but not limited to job-related skills, qualifications, experience, education, location, or other factors related to the role. Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. Thank you for your interest in Sungrow.

About Sungrow: Sungrow Power Supply Co., Ltd. (Stock code: 300274) is a globally recognized renewable energy company, specializing in R&D, manufacturing, and services for solar, wind, energy storage, hydrogen, and electric vehicle solutions. Established in 1997, Sungrow is known for its innovative photovoltaic inverters, wind converters, EV chargers, energy storage systems, and hydrogen production technologies. Its products are sold in over 180 countries, with a cumulative installed capacity exceeding 740 GW by the end of 2024. Sungrow has contributed to national standards and holds numerous core technologies. With multiple industry awards and advanced R&D centers, it ranks among the global leaders in clean energy. Guided by its mission "Clean power for all," Sungrow continues to drive innovation and global sustainability. The Position: This role supports areas of field Service operation within Sungrow USA related to commissioning, warranty, and Operations and Maintenance (O&M) of the expanding installed sites in the region. Reporting to the regional field service supervisor, this position is responsible for troubleshooting, repairing, maintaining, and commissioning support of PV inverters and ancillary equipment/ systems, usually at the customer's site or at a staging yard/warehouse. This position will comply with the Safety Mandate, "ZERO HARM," to ensure safe and efficient work and operation of the facility for all personnel and equipment. Ensures that personnel and safety issues are given priority to maintaining a safe and efficient working environment. Implements and enforces safety management policy and procedures regarding the facility: safety information, hazard analysis, safe operations/Maintenance Training, subcontractor compliance, plant integrity, work permits, emergency planning, and response. Duties and Responsibilities: * Perform a variety of technical assignments involving the installation, operation, testing, and maintenance of string and central solar inverter and/or BESS Systems, PCS, batteries, and ancillary equipment. * Perform general troubleshooting and diagnosis under Sungrow's maintenance and repair guidelines. * As needed, support and perform pre-commissioning (with and without grid emulator) and commissioning of solar inverters and BESS systems within schedule and work plans * Additionally, for those on O&M capacity, perform Preventive Maintenance and other Long Term Service Agreement (LTSA) activities per the contract * Investigate solar plant issues such as DC array grid faults, inverter design issues, and utility grid transients. For BESS positions, these investigations may also involve SOC checks and module /component-level troubleshooting, replacement of electrical/electronic parts, SW version updates, etc. * Provide feedback to the engineering and project team on possible mechanical and electrical design improvements. * Lead upgrade/rework projects (software and hardware) in the field and interact with customers to explain the project's technical scope and manage work schedule and commitments. * Work with customer SCADA engineers to set up systems communication and parameters involving Sungrow's controllers and F&G systems as needed. * Accurately describes troubleshooting sequences and procedures which they have observed * Identifies and documents basic mechanical and electrical issues and problems * Performs basic corrective maintenance * Create/modify Field Service procedures for safety troubleshooting and maintenance if required. * When using contractors on sites, act as the Lead to ensure the contractors submit daily activity reports and JSA reports and work follows Sungrow standards and expectations. * Prepare and submit own Daily Activity Reports and Daily JSA Reports. * Work independently in the field and with Design Engineers to resolve high-level technical issues, support the investigation of the root cause for technology applications for complex projects * Coordinate and work closely with other engineering, logistic, financial, and program management disciplines to maintain the solar plant operations. * Verify and comply with engineering documentation standards and test procedures. * Completes documentation in a timely and organized fashion * Follow level-appropriate standard operating procedures. * Own creation and submission of all field paperwork and documentation for full compliance with site documentation and project requirement * Serve as a safety second if needed. Education or Desired License and Certificates: * Associate's Degree in an Engineering or Computer Science Discipline from an accredited university or college * Renewable industry experience is desired * Power Electronics experience is desired * OSHA 10 certificate within 12 months of date of hire * NFPA 70e certificate within 12 months of date of hire Competencies: * Strong demonstration of workplace safety practices * Understands and follows a Safety Plan * Comprehend Job Hazard Analysis and conduct level-appropriate Job Hazard Analysis * Designated as Authorized Person for LOTO * Compliant with environmental safety requirements * Can utilize and inspect appropriate safety and fall protection equipment Minimum Requirements: * Proficient in the use of Microsoft Office, including Word, Excel, Outlook, PowerPoint * Motivated self-starter with complex problem-solving abilities. * A 'completer-finisher' taking accountability for ideas from inception to delivery in an environment that requires robust metrics to confirm the success. * Excellent verbal and written communication skills and the ability to interact professionally with a diverse group of partners, senior managers, and subject matter experts. * 3 plus years of overall experience in a technical field * 2 years of experience in solar inverters or BESS * Must possess the ability to work with test equipment and hand tools as required. * Must be able to closely follow instructions and pre-established procedures/SOP to perform the ductions of the job * Must be proficient in Microsoft Office Suite (Word, Excel, PowerPoint and Outlook) * OSHA, NFPA70A, Electrical Safety * Experience and/or certification with MV transformers a plus Travel: * 80% Plus Work Location and Status: * Contract-to-Hire, NY area * No visa/legal sponsorship Compensation: * Compensation commensurate with experience * Competitive benefits package and employee programs * Strong personal and company growth opportunities For candidates in the states of California, Colorado, New York and Washington, the anticipated base pay for this role is between $36 to $40 per hour plus OT. This range does not include any other compensation components or other benefits that an individual may be eligible for. The base pay offered is dependent upon several factors, including but not limited to job-related skills, qualifications, experience, education, location, or other factors related to the role. Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. Thank you for your interest in Sungrow.

Sungrow Power Supply Co., Ltd. (Stock code: 300274) is a globally recognized renewable energy company, specializing in R&D, manufacturing, and services for solar, wind, energy storage, hydrogen, and electric vehicle solutions. Established in 1997, Sungrow is known for its innovative photovoltaic inverters, wind converters, EV chargers, energy storage systems, and hydrogen production technologies. Its products are sold in over 180 countries, with a cumulative installed capacity exceeding 740 GW by the end of 2024. Sungrow has contributed to national standards and holds numerous core technologies. With multiple industry awards and advanced R&D centers, it ranks among the global leaders in clean energy. Guided by its mission “Clean power for all,” Sungrow continues to drive innovation and global sustainability. The Position: This role supports areas of field Service operation within Sungrow USA related to commissioning, warranty, and Operations and Maintenance (O&M) of the expanding installed sites in the region. Reporting to the regional field service supervisor, this position is responsible for troubleshooting, repairing, maintaining, and commissioning support of PV inverters and ancillary equipment/ systems, usually at the customer's site or at a staging yard/warehouse. This position will comply with the Safety Mandate, “ZERO HARM,” to ensure safe and efficient work and operation of the facility for all personnel and equipment. Ensures that personnel and safety issues are given priority to maintaining a safe and efficient working environment. Implements and enforces safety management policy and procedures regarding the facility: safety information, hazard analysis, safe operations/Maintenance Training, subcontractor compliance, plant integrity, work permits, emergency planning, and response. Duties and Responsibilities: Perform a variety of technical assignments involving the installation, operation, testing, and maintenance of string and central solar inverter and/or BESS Systems, PCS, batteries, and ancillary equipment. Perform general troubleshooting and diagnosis under Sungrow's maintenance and repair guidelines. As needed, support and perform pre-commissioning (with and without grid emulator) and commissioning of solar inverters and BESS systems within schedule and work plans Additionally, for those on O&M capacity, perform Preventive Maintenance and other Long Term Service Agreement (LTSA) activities per the contract Investigate solar plant issues such as DC array grid faults, inverter design issues, and utility grid transients. For BESS positions, these investigations may also involve SOC checks and module /component-level troubleshooting, replacement of electrical/electronic parts, SW version updates, etc. Provide feedback to the engineering and project team on possible mechanical and electrical design improvements. Lead upgrade/rework projects (software and hardware) in the field and interact with customers to explain the project's technical scope and manage work schedule and commitments. Work with customer SCADA engineers to set up systems communication and parameters involving Sungrow's controllers and F&G systems as needed. Accurately describes troubleshooting sequences and procedures which they have observed Identifies and documents basic mechanical and electrical issues and problems Performs basic corrective maintenance Create/modify Field Service procedures for safety troubleshooting and maintenance if required. When using contractors on sites, act as the Lead to ensure the contractors submit daily activity reports and JSA reports and work follows Sungrow standards and expectations. Prepare and submit own Daily Activity Reports and Daily JSA Reports. Work independently in the field and with Design Engineers to resolve high-level technical issues, support the investigation of the root cause for technology applications for complex projects Coordinate and work closely with other engineering, logistic, financial, and program management disciplines to maintain the solar plant operations. Verify and comply with engineering documentation standards and test procedures. Completes documentation in a timely and organized fashion Follow level-appropriate standard operating procedures. Own creation and submission of all field paperwork and documentation for full compliance with site documentation and project requirement Serve as a safety second if needed. Education or Desired License and Certificates: Associate's Degree in an Engineering or Computer Science Discipline from an accredited university or college Renewable industry experience is desired Power Electronics experience is desired OSHA 10 certificate within 12 months of date of hire NFPA 70e certificate within 12 months of date of hire Competencies: Strong demonstration of workplace safety practices Understands and follows a Safety Plan Comprehend Job Hazard Analysis and conduct level-appropriate Job Hazard Analysis Designated as Authorized Person for LOTO Compliant with environmental safety requirements Can utilize and inspect appropriate safety and fall protection equipment Minimum Requirements: Proficient in the use of Microsoft Office, including Word, Excel, Outlook, PowerPoint Motivated self-starter with complex problem-solving abilities. A ‘completer-finisher' taking accountability for ideas from inception to delivery in an environment that requires robust metrics to confirm the success. Excellent verbal and written communication skills and the ability to interact professionally with a diverse group of partners, senior managers, and subject matter experts. 3 plus years of overall experience in a technical field 2 years of experience in solar inverters or BESS Must possess the ability to work with test equipment and hand tools as required. Must be able to closely follow instructions and pre-established procedures/SOP to perform the ductions of the job Must be proficient in Microsoft Office Suite (Word, Excel, PowerPoint and Outlook) OSHA, NFPA70A, Electrical Safety Experience and/or certification with MV transformers a plus Travel: 80% Plus Work Location and Status: Contract-to-Hire, NY area No visa/legal sponsorship Compensation: Compensation commensurate with experience Competitive benefits package and employee programs Strong personal and company growth opportunities For candidates in the states of California, Colorado, New York and Washington, the anticipated base pay for this role is between $36 to $40 per hour plus OT. This range does not include any other compensation components or other benefits that an individual may be eligible for. The base pay offered is dependent upon several factors, including but not limited to job-related skills, qualifications, experience, education, location, or other factors related to the role. Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. Thank you for your interest in Sungrow.

A skilled position responsible for installation, set up, repair and ongoing maintenance of vending, cooling and\/or fountain equipment at customer accounts. Diagnoses equipment problems, uses judgment to determine how to best repair or replace. Position works independently and has frequent customer contact.May require lifting, carrying, pulling and\/or moving between 20 and 45 pounds repeatedly over workday Requires kneeling, squatting, crouching, crawling and bending when making repairs, often in low places. Position may require moving vending machines weighing 800\-1200 pounds. PRIMARY ACCOUNTABILITIES: Repair and perform preventative maintenance on marketing equipment Unload and reload with products as necessary Educate customers on basic equipment repair and upkeep procedures Install equipment by making holes and route lines to connect products to dispensing unit, connecting water and gas supply and finding drains for units with ice. For box syrup, build racks and connect lines Fill installed equipment and adjust to proper mixture Prioritize and schedule service and PM calls to meet customer service windows Drive to location, evaluate situation and perform necessary work (may include plumbing, electricity, refrigeration, carpentry) Collect accurate and complete equipment and customer information Remove old parts and replace with new parts Maintain parts inventory on service truck Establish positive relationship with contacts at service calls After each call, complete paperwork on job and call in paperwork every two hours Transport miscellaneous items (e.g., compressors for repair\/scrap, cardboard for recycle, etc.) Regular, reliable, predictable attendance Requirements BASIC QUALIFICATIONS: 18 years or older 21 years or older if CDL Required Valid CDL license (if applicable) Pass DOT Physical and DOT Road\-test Adhere to DOT Regulations Senior technician requires certification in refrigeration Must be able to pass refrigeration certification Type I\/Type II practices (if applicable) HELPFUL EXPERIENCE: Working with mechanical systems (e.g., knowing mechanical concepts, troubleshooting and repairing appliances, performing basic household repair in plumbing, circuits, fuses, and electrical components, operating hand tools and power tools, etc.) Serving customers (e.g., resolving customer issues, ensuring appropriate communication with store managers, following up on customer requests, etc.) Working with basic refrigeration systems (e.g., understanding refrigeration cycle, Freon, compressors, evaporators, condensers, etc.) Working with electrical systems (e.g., understanding flow, wiring, outlets, etc.) Working with plumbing (e.g., working with drains, water supply, ice makers, shut\-off valves, sweating copper, filtration systems, etc.) Generating and setting work schedules (e.g., determining priority of work, building work schedules, etc.) Equipment installation (e.g., HVAC, refrigeration, auto, copiers, fountain products, etc.) Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901\-4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance. > All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. PepsiCo is an Equal Opportunity Employer: Female \/ Minority \/ Disability \/ Protected Veteran \/ Sexual Orientation \/ Gender Identity If you'd like more information about your EEO rights as an applicant under the law, please download the available EEO is the Law & EEO is the Law Supplement documents. View PepsiCo EEO Policy. "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"682167578","FontFamily":"Arial, Helvetica, sans\-serif","job OtherDetails":[{"field Label":"Department Name","uitype":4,"value":"Pepsi Co"},{"field Label":"Industry","uitype":2,"value":"Manufacturing"},{"field Label":"Work Experience","uitype":2,"value":"1\-3 years"},{"field Label":"City","uitype":1,"value":"Albany"},{"field Label":"State\/Province","uitype":1,"value":"Georgia"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"31721"}],"header Name":"Full\-time Field Service Technician Trainee (MEM)\- CDL A Permit","widget Id":"**********00072311","is JobBoard":"false","user Id":"**********00235003","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":true,"job Id":"**********10398101","FontSize":"15","location":"Albany","embedsource":"CareerSite","logo Id":"hs654aa3cf36a6b354ae38f8148a2cfbb79b2"}

Responsible for the installation and maintenance of ATMs and Air/Vac equipment. ESSENTIAL JOB DUTIES / RESPONSIBILITIES: Install, convert, repair and remove ATMs, Air/Vac, and other equipment and Cash Depot products. Perform cash replenishment and coin removal, as scheduled and requested. Partner with the territory dispatcher to execute dispatch request as scheduled and requested. Complete tasks as assigned by supervisor or applicable Cash Depot staff members. Communicate inventory and support requests in order to complete scheduled tasks in an accurate and timely manner. Perform administrative paperwork in a complete, accurate and timely manner. Maintain important department metric standards in efficiency, safety, first time fix rate, and other metrics important to Cash Depot and our customers. Assist other technicians and help train or perform ride along training, as needed. Must follow all security procedures and policies. OTHER JOB DUTIES / EXPECTATIONS: Maintain a professional image, both personal and vehicle. Maintain inventory standards as required. Attend training as requested in Wisconsin and maintain technical competencies of ATMs and Air Products. Identify and recommend efficiency improvements. Operate as a team player. Performs other job-related duties as assigned. Flexible work schedule with on-call duty. Work independently with minimal supervision. REQUIREMENTS / QUALIFICATIONS: (Education, Experience, Skills, Abilities) High School Degree / GED Valid driver's license, clean driving record, and ability to be insured through Company's risk insurer. Ability to obtain and maintain a DOT Medical Examiners Certification (Federal Medical Certification) is required. Ability to drive a vehicle over 50% of the shift. Ability to work in a safe manner when lifting and performing tasks associated with position. Experience in trouble shooting or electro mechanical work. Ability to follow the expectations set forth in the Field Service Handbook. Excellent communication skills, written/verbal with internal and external contacts. Proven ability to be organized, detailed, multi-tasker, critical thinker, accurate, thorough and a problem-solver. Ability to adapt to change in the workplace or assignment of duties. PHYSICAL REQUIREMENTS: The physical demands described here are representative of those that must be met by Team Members to successfully perform the essential functions of the field technician position. Communication: While performing the duties of this job, the Team Member is regularly required to communicate with customers in the field, and fellow Team Members, which requires the ability to speak and hear. Required to complete reports which requires ability to write and/or type. Physical Demands: N (Not Applicable) Activity is not applicable to this position. O (Occasionally) Position requires this activity up to 33% of the time (0 - 2.5+ hours/day) F (Frequently) Position requires this activity from 33% - 66% of the time (2.5 - 5.5+ hrs/day) C (Constantly) Position requires this activity more than 66% of the time (5.5+ hrs/day) Physical Demands Lift/Carry Push/Pull Stand F Up to 50 lbs. F Up to 50 lbs. F Walk F 51 - 100 lbs. O 51 - 100 lbs. F Sit C 101 - 150 lbs. O 101 - 150 lbs. F Manually Manipulate C Over 150 lbs. O Over 150 lbs. O Reach Outward F Reach Above Shoulder O Climb O Crawl O Squat or Kneel O Bend O Team Members will encounter the following items while performing their job duties, typically while performing their job independently without the assistance of others, and thus Team Members must be able to lift such items as an essential function of this position: Item Weight Dispenser (part) 34 lbs. Coin Bag 40 lbs. Compressor 40 lbs. High Security Base 60 lbs. Coin Box 60 lbs. Concrete Bag 80 lbs. Dolly 86 lbs. Top Compartment 140 lbs. Vacuum Attachment 310 lbs. (with lifting equipment) ATM Machines** 280 - 875 lbs. (with lifting equipment) **Note: ATMs weighing over 875 lbs. require two (2) Field Service Technicians. Other Physical Requirements: Vision (Near, Distance, Color, Peripheral, Depth) Sense of Sound - normal WORK ENVIRONMENT: This job operates in a traveling capacity within a van (and sometimes more depending on assigned route) and will be exposed to weather conditions within the specific territory. This job also involves operation at customer locations (estimated 50% of shift). Team Member will receive direction via phone or email. This role routinely requires the use of lifting equipment, hand tools, iPad and cell phone, etc. This is a full-time position. Work schedule is flexible, includes nights, weekends, holidays and on call duty. OTHER DUTIES: Cash Depot has reviewed this to ensure that essential functions and basic duties have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills, and abilities. Additional functions and requirements may be assigned by supervisors, as deemed appropriate. This document does not represent a contract of employment, and Cash Depot reserves the right to change this job description and/or assign tasks for the employee to perform, as the company may deem appropriate. ADA REASONABLE ACCOMMODATION STATEMENT: Cash Depot is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Contact the Human Resources Department if you ever need an accommodation to perform the essential functions of this position. The Company will then engage in an interactive dialogue with you to determine what reasonable accommodations may be available to enable you to perform the essential functions of your position, absent undue hardship. Cash Depot provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Qualifications