Field service technician jobs in Madera, CA

Job Title: Field Service Technician Reports to: Equipment Supervisor Pay: Salary is based on experience and geographic location. Antigo, WI- $25.52-$30.62 Idaho Falls, ID- $23.85-$28.62 Pasco, WA- $27.30-$32.76 Fresno, CA- $27.30-$32.76 Monte Visto, CO- $25.52-$30.62 Job Summary The Field Service Technician is responsible for performing field and in-house service work for customers, the installation and set-up of new machines, and ensuring customer satisfaction by performing high quality work in a timely manner. Service work includes installation, repair, and maintenance of electrical, mechanical, computer, and industrial systems and controls of mechanical equipment located in production settings. Essential Duties Install, maintain, and repair electro-mechanical equipment. Travel to customer locations throughout North America to perform installations, maintenance, and repairs to electro-mechanical equipment. Prepare and test all equipment before equipment is shipped to customers to ensure proper functioning and operation. Load and unload equipment at Volm and customer facilities. Train customers and operators on proper use of equipment sold and serviced by Volm Companies. Troubleshoot and diagnose issues with equipment utilizing technical manuals, schematics, and diagnostics tools, visually and by sound. Conduct phone service support on an “on-call” basis. Document all installation and service work performed in a timely manner including expense reports, service reports, time sheets, etc. Continuously identify opportunities for process improvement and cost reduction. Required Skills and Abilities Ability to obtain and maintain a valid US passport or passport card preferred. Developed understanding and use of mechanical, electrical, and electronic systems, including PLC and VFD controls. Ability to accurately read and interpret mechanical, electrical, and hydraulic drawings, schematics, and diagrams. Strong critical thinking, troubleshooting, and analytical skills. Ability to read and follow oral and written instructions. Ability to handle stress and successfully perform in a fast-past environment. The ability to establish priorities, work independently, and proceed with objectives without direct supervision. Adaptability and flexibility to embrace new skills. Proven ability to work collaboratively in a team environment. Strong time management skills for efficient task allocation and meeting deadlines. Meticulous attention to detail in completing tasks and maintaining high-quality standards. Education and Experience Knowledge of mechanical and electrical standards and practices normally acquired through completion of a technical certificate or equivalent combinations of education and experience. Established experience working with material and resource planning systems, spreadsheets, word processing documents, customer management databases, and other applicable computer systems and data management software preferred. Established experience in electro-mechanical principles, systems, and repair preferred. Journeyman electrician license preferred. Established experience building and maintaining strong customer service relationships preferred. Physical Requirements Ability to stand, walk, and move around for extended periods of time. Capability to lift and carry objects of various weights, ranging from light office supplies to heavy machinery components. Proficiency in using hands, fingers, and arms for tasks such as typing, writing, operating machinery, assembling products, etc. Sufficient visual acuity to read documents, operate equipment, and recognize details at close and distant ranges. Ability to hear and understand verbal communication, as well as detect warning signals or equipment malfunctions. Endurance to withstand prolonged periods of physical activity or work shifts, particularly relevant for manufacturing roles that involve repetitive tasks. Ability to move quickly, easily, and with coordination to navigate through tight spaces, react swiftly to changing work conditions, and perform tasks that require agility. Flexibility to bend, stoop, and reach low or high objects, particularly relevant for jobs that involve material handling or maintenance tasks. Capability to climb ladders, stairs, or scaffolding, as required in certain manufacturing or construction environments. Ability to perform physically demanding tasks, such as lifting, pushing, pulling, or carrying heavy objects. Good hand-eye coordination and motor skills for tasks that require precision, such as operating machinery or using hand tools. Adaptability to work in varying environmental conditions, such as temperature extremes, noise, dust, or fumes, depending on the nature of the job. Willingness to adhere to safety protocols and wear protective gear, including helmets, goggles, gloves, and safety shoes, as required by the job. Company Culture & Values A Commitment to Our Purpose (COMMITTED PEOPLE) - Our mission is to serve and build up our customers, suppliers, communities, and each other, guided by the principles of our Lord Jesus Christ. The commitment to serving and building up is easily seen in those employees that exemplify this value. Without Our Customers We Are Nothing (CUSTOMER FIRST) - We realize that we are blessed to serve our customers and without them, our company does not exist. They rely on us for their success and that is a responsibility we cannot take lightly. Our focus must be on serving them with as seamless communication and access to products as possible. Kind, Humble and Positive (HUMBLE) - These positive traits do not mean being a doormat to others. But when a person is kind, humble and positive it comes through in their genuine caring for those around them. A Desire For “Expert” (EXPERTS) - Our people want to be seen as the experts in their specific roles. From how we convert a bag efficiently and with highest quality, to knowledge of the product portfolio, to desiring to know more about tax or human resource policy - the desire for “expert” drives us in each of our roles. Intentional Growth - Developing of Self and Others (PERSONAL GROWTH)- Times, tools, and customer expectations change. Our team members are interested in developing themselves and those around them. We know that a stronger team is one that makes our customers and our fellow employees happier. Strong Work Ethic (HARD WORKERS) - The commitment to serve those around us is honorable and we respond to this by putting our strongest effort into that purpose. High Expectations of Self and Others (HIGH EXPECTATIONS) - We expect ourselves, and those around us, to put in our best effort. When others struggle, we help them align towards perfection. When we struggle, we are open and humble to hear it and course-correct accordingly. If It Isn't Safe, We Don't Do It (SAFETY) - All people deserve to return home to their loved ones safely and work in an environment where they can best execute their tasks safely. When choosing between safety and profit, safety and efficiency, safety and feelings, safety, and “x” - we choose safety. Travel Requirements This is a field-based role that requires frequent overnight travel, up to 75% of the time. Driver Qualification The ability to drive a company owned/leased vehicle or personal vehicle on behalf of the company is preferred. Inclusion in the company's driver qualification program is required to drive a company owned/leased vehicle or personal vehicle. Becoming a qualified driver includes: Agree to the company driving policies that apply to company owned/leased vehicle or personal vehicle as applicable. Possess and maintain a valid driver license and be a minimum of 21 years of age. Maintain an acceptable driving record, as evidenced by completion of a baseline motor vehicle record check and ongoing monitoring. When driving a personal vehicle on behalf of the company, must provide a copy of the declaration page from personal auto insurance that shows the policy dates and minimum coverage amounts ($300,000 bodily injury per accident/$100,000 property damage per accident or if driving less than 5 hours/200 miles a year $50,000 bodily injury per accident/$10,000 property damage per accident or the state minimum, whichever is more). This requirement is initially and then annually thereafter. This job description is intended as a general outline of the primary responsibilities of the position. It is not intended to be an exhaustive or comprehensive list of all duties, responsibilities, or activities that may be required. The employer reserves the right to modify, add, or remove any responsibilities, duties, or activities as deemed necessary with or without notice. Volm Companies is an equal opportunity employer and is committed to providing reasonable accommodation to qualified individuals with disabilities and other protected characteristics. If you require reasonable accommodation to perform the essential functions of the job, please inform us and we will work with you to address your needs. Benefits As a family-owned and operated company, we offer a comprehensive benefits package designed to support you and your family. We offer a strong foundation of benefits, including access to medical, dental, and vision coverage, an HSA employer contribution, and a 401k with profit sharing to secure your future. To support your overall well-being and family life, we offer additional benefits beyond the core package, such as paid vacation, wellness stipends, childcare reimbursement assistance, and much more. We are committed to continuously enhancing our benefits to meet the evolving needs of our team.

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Aeronautics Systems is looking to add a **Principal or Senior Principal Network and Communications Field Service Engineer** to our team at **RAAF Base Edinburgh** near **Adelaide, Australia** . This position will receive daily tasking and prioritization from their site lead. The selected candidate will be responsible for operations and maintenance support of the MQ-4C Triton network and communications systems at a Forward Operating Base (FOB). **Duties and Responsibilities:** + Provide real time support for flight operations and maintenance, addressing any issues related to communications and networking to include fault isolation, remediation, and resolution. + Perform field integration, troubleshooting, and repair of communications and data link systems in military flight test environment, including operations on a flightline, in a hangar, and in command-and-control centers. + Adherence to checklists and procedures to ensure repeated success and providing redlines to procedures when necessary. + Communicate complex technical issues to local support, the Degrader Action Cell (DAC), Main Operation Bases (MOBs), and Responsible Engineers (REs). + Support and lead air crew engagement for proper techniques in solving complex analysis of technical problems that arise during operations. + Assist with trend analysis as needed for Responsible Engineers (REs). + Perform/support review and analysis of supplier design data and definition of functional test requirements including acceptance, qualification, and system integration. + Take responsibility for the testing, maintenance, and integration of Comms and Networks equipment to include radio terminals, software loads, switches, routers, and firewalls required to support ground and flight test operations. + Work with system admins, maintainers, and onsite personnel to troubleshoot and repair any internal operational issues. ** The selected candidate will be put on a temporary Domestic Assignment and will report to our San Diego, CA site daily prior to international deployment while clearance(s), Visa(s), and other documents are processing. The employee will go through training in San Diego during this period. ** **The expected timeline before deployment is 3-4 months but this will vary.** Initially, this position will work a 9/80 shift. **As the program matures, the shifts may become 12-hour shifts that could include nights, weekends, and/or holidays.** The selected candidate will be required to work full-time, on-site in Australia. This position requires the ability to **travel up to 50%** of the time once in final location. _This position can be filled at either the Principal Field Service Engineer OR Senior Principal Field Service Engineer level, depending upon the qualifications below._ **Basic Qualifications for Principal Field Service Engineer:** + Bachelor's Degree in a STEM (Science, Technology, Engineering or Mathematics) discipline and 5 years of related engineering experience; OR a Master's degree in a STEM discipline and 3 years of related engineering experience; OR a PhD in a STEM discipline and 1 year of related engineering experience. + Ability to obtain and maintain DoD 8140 approved IAT Level II (or higher) compliant certification. Examples include: Security+CE, CCNP, and CISSP. This certificate must be obtained within a reasonable amount of time as determined by the company to meet its business needs. + Competence in Linux, troubleshooting, engineering documents, tools and equipment + Familiarity with comms/networking operations + Ability to support assignment at location (RAAF Base Edinburgh in Australia) for minimum of 18 months + Ability to pass a new hire physical if determined necessary by Company, based on OCONUS location. + **Active** **DoD** **Top Secret** clearance (with a background investigation within the past 6 years or enrolled into Continuous Evaluation). + Ability to obtain and maintain SCI access. + Ability to obtain a CI Polygraph. + Ability to obtain and maintain Special Access Program (SAP) clearance. This SAP must be obtained within a reasonable amount of time as determined by the company to meet its business needs. **Basic Qualifications for Senior Principal Field Service Engineer:** + Bachelor's Degree in a STEM (Science, Technology, Engineering or Mathematics) discipline and 8 years of related engineering experience; OR a Master's degree in a STEM discipline and 6 years of related engineering experience; OR a PhD in a STEM discipline and 4 years of related engineering experience. + Ability to obtain and maintain DoD 8140 approved IAT Level II (or higher) compliant certification. Examples include: Security+CE, CCNP, and CISSP. This certificate must be obtained within a reasonable amount of time as determined by the company to meet its business needs. + Competence in Linux, troubleshooting, engineering documents, tools and equipment + Familiarity with comms/networking operations + Ability to support assignment at location (RAAF Base Edinburgh in Australia) for minimum of 18 months + Ability to pass a new hire physical if determined necessary by Company, based on OCONUS location. + **Active** **DoD** **Top Secret** clearance (with a background investigation within the past 6 years or enrolled into Continuous Evaluation). + Ability to obtain and maintain SCI access. + Ability to obtain a CI Polygraph. + Ability to obtain and maintain Special Access Program (SAP) clearance. This SAP must be obtained within a reasonable amount of time as determined by the company to meet its business needs. **Preferred Qualifications for both levels:** + Active DoD 8140 approved IAT Level II (or higher) compliant certification. Examples include: CCNA Security, Security+CE, CCNP, and CISSP + Technical expertise in all areas of network and computer hardware and software interconnection and interfacing, such as routers, firewalls, switches + Experience with test equipment: network analyzers, spectrum analyzers, signal generators + Cisco Certified Network Associate (CCNA) certification + Experience with communication technologies; examples include Internet Protocol (IP) networks, Voice over IP (VoIP), Information Assurance (IA), satellite and Line-of-Sight (LOS) RF communications, control interfaces, and co-site interference + Operations and Maintenance experience at a field site Primary Level Salary Range: $85,600.00 - $128,400.00 Secondary Level Salary Range: $106,800.00 - $160,200.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Role Summary This position is for a hands-on Field Service Technician who will support Rivian vehicle repairs. The role requires a collaborative, team-oriented individual capable of working in a dynamic, fast-paced environment. While the role is based in a primary location, it may require operating remotely or traveling to various locations, including the production plant, to provide vehicle support as business needs demand. This job description outlines the full spectrum of skills required, and candidates will be assessed against this spectrum to determine the appropriate level for their expertise. Responsibilities Core Responsibilities Perform or assist with assigned vehicle diagnosis, repairs, installations, and inspections, whether at a service center or in the field directly at customer homes, businesses, or other convenient locations. Identify and explain the Rivian product line, EV framework, tools, and accessories. Utilize available technical resources to follow Rivian repair procedures efficiently without compromising quality or safety. Conduct road tests to ensure the quality of repairs. Manage necessary parts operations, including ordering, receiving, shipping, and inventory. Identify areas of improvement and provide feedback to senior technicians or leadership. Support service campaigns and containment initiatives. Ensure that all work and technical notes are properly documented for internal and external use. Work collaboratively with a team spirit and maintain high-quality work with minimal supervision. Communicate with a high level of professionalism in customer-facing situations. Stay current with technical skills and complete required training. Qualifications General Requirements: High School Diploma or GED is preferred. Proficient in using hand tools and power tools. Must be at least 21 years old. Must possess a valid driver's license and maintain a clean driving record, with no driving-related suspensions or revocations within a 3-5 year period. Ability to drive a non-commercial truck and trailer is preferred. Must be available for a 40-hour work week, which may include weekends, holidays, and shifts during early morning, evening, or overnight hours based on business needs. Proficient with laptops or computers in Windows or Mac environments. Strong organizational skills, attention to detail, and an eagerness to learn. Ability to perform physical tasks such as lifting up to 50 lbs., sitting, standing, walking, and frequent use of hands for grasping tools and data entry. Physical exertion may be required to perform occupational tasks (sitting, standing, walking, bending, kneeling, carrying, reaching, pushing, pulling, and lifting up to 50 lbs.). Ability to read and speak fluent English. Ability to see, read and interpret documents such as governmental regulations, safety rules, operating and maintenance instructions or schematics. Experience: Hands-on work experience in an automotive shop is highly preferred. However, if you are a recent automotive graduate looking for your next opportunity, we encourage you to apply. This role is open to various levels of experience, from entry-level to career technicians A background in electric vehicle (EV) or hybrid repair is considered a plus. Experience in start-up environments is preferred. Experience with parts departments, billing, and work order management systems is preferred. Spectrum of Technical Skills Low Voltage & Electrical Systems: Technicians should have a foundational understanding of basic electricity theory and be able to safely use a DVOM for various circuit measurements. Proficiency should extend to reading and leveraging electrical schematics as a diagnostic resource. Advanced candidates will demonstrate a deep understanding of automotive electronics, including CAN and LIN networks, and possess the ability to diagnose complex faults and perform wiring repairs according to manufacturer standards. High Voltage Systems: A core requirement is understanding the risks involved with high voltage systems and the ability to safely power them down and work on them using appropriate personal protective equipment (PPE). This includes understanding the function of various high voltage components and their monitoring systems. Highly skilled technicians will be capable of diagnosing complex high voltage faults related to charging, isolation, and interlock loop issues using the manufacturer's diagnostic processes. Chassis, Brakes & Suspension: Technicians should be proficient in fundamental chassis service, including the ability to mount and balance tires, perform vehicle alignments, and replace brake system components. The role requires the ability to diagnose mechanical suspension components and progress to repairing advanced vehicle dynamic issues related to traction control, ABS, and power steering. Top-tier candidates will be adept at resolving complex drivability concerns such as Noise, Vibration, and Harshness (NVH). Thermal Systems: Technicians must be able to service vehicle thermal systems, starting with the ability to perform a coolant drain-and-fill and safely handle refrigerant with a 609 certification. A comprehensive understanding of the entire A/C system and its components is expected. An ideal candidate can proficiently use an A/C machine and diagnose a range of thermal system concerns, including issues with coolant systems, air conditioning performance, and HVAC systems. Advanced Driver Assistance Systems (ADAS): A working knowledge of ADAS is required, beginning with a basic understanding of the features and their operation. Technicians will be expected to replace system components and perform necessary calibrations. Advanced understanding includes knowing the functionality and limitations of the complete ADAS system and the specific roles of its various sensors. Body & Glass: The role includes responsibilities related to the vehicle body, from assisting with glass removal and installation to safely replacing windshields and other glued body fixtures. Technicians may be tasked with adjusting body panels to specified tolerances and should be capable of diagnosing and repairing issues such as wind noise and water leaks. Pay Disclosure Salary Range/Hourly Rate for California Based Applicants: $00 - 38.10 per hour (actual compensation will be determined based on experience, location, and other factors permitted by law). Benefits Summary: Rivian provides robust medical/Rx, dental and vision insurance packages for full-time employees, their spouse or domestic partner, and children up to age 26. Coverage is effective on the first day of employment. Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. General Requirements: High School Diploma or GED is preferred. Proficient in using hand tools and power tools. Must be at least 21 years old. Must possess a valid driver's license and maintain a clean driving record, with no driving-related suspensions or revocations within a 3-5 year period. Ability to drive a non-commercial truck and trailer is preferred. Must be available for a 40-hour work week, which may include weekends, holidays, and shifts during early morning, evening, or overnight hours based on business needs. Proficient with laptops or computers in Windows or Mac environments. Strong organizational skills, attention to detail, and an eagerness to learn. Ability to perform physical tasks such as lifting up to 50 lbs., sitting, standing, walking, and frequent use of hands for grasping tools and data entry. Physical exertion may be required to perform occupational tasks (sitting, standing, walking, bending, kneeling, carrying, reaching, pushing, pulling, and lifting up to 50 lbs.). Ability to read and speak fluent English. Ability to see, read and interpret documents such as governmental regulations, safety rules, operating and maintenance instructions or schematics. Experience: Hands-on work experience in an automotive shop is highly preferred. However, if you are a recent automotive graduate looking for your next opportunity, we encourage you to apply. This role is open to various levels of experience, from entry-level to career technicians A background in electric vehicle (EV) or hybrid repair is considered a plus. Experience in start-up environments is preferred. Experience with parts departments, billing, and work order management systems is preferred. Spectrum of Technical Skills Low Voltage & Electrical Systems: Technicians should have a foundational understanding of basic electricity theory and be able to safely use a DVOM for various circuit measurements. Proficiency should extend to reading and leveraging electrical schematics as a diagnostic resource. Advanced candidates will demonstrate a deep understanding of automotive electronics, including CAN and LIN networks, and possess the ability to diagnose complex faults and perform wiring repairs according to manufacturer standards. High Voltage Systems: A core requirement is understanding the risks involved with high voltage systems and the ability to safely power them down and work on them using appropriate personal protective equipment (PPE). This includes understanding the function of various high voltage components and their monitoring systems. Highly skilled technicians will be capable of diagnosing complex high voltage faults related to charging, isolation, and interlock loop issues using the manufacturer's diagnostic processes. Chassis, Brakes & Suspension: Technicians should be proficient in fundamental chassis service, including the ability to mount and balance tires, perform vehicle alignments, and replace brake system components. The role requires the ability to diagnose mechanical suspension components and progress to repairing advanced vehicle dynamic issues related to traction control, ABS, and power steering. Top-tier candidates will be adept at resolving complex drivability concerns such as Noise, Vibration, and Harshness (NVH). Thermal Systems: Technicians must be able to service vehicle thermal systems, starting with the ability to perform a coolant drain-and-fill and safely handle refrigerant with a 609 certification. A comprehensive understanding of the entire A/C system and its components is expected. An ideal candidate can proficiently use an A/C machine and diagnose a range of thermal system concerns, including issues with coolant systems, air conditioning performance, and HVAC systems. Advanced Driver Assistance Systems (ADAS): A working knowledge of ADAS is required, beginning with a basic understanding of the features and their operation. Technicians will be expected to replace system components and perform necessary calibrations. Advanced understanding includes knowing the functionality and limitations of the complete ADAS system and the specific roles of its various sensors. Body & Glass: The role includes responsibilities related to the vehicle body, from assisting with glass removal and installation to safely replacing windshields and other glued body fixtures. Technicians may be tasked with adjusting body panels to specified tolerances and should be capable of diagnosing and repairing issues such as wind noise and water leaks. Core Responsibilities Perform or assist with assigned vehicle diagnosis, repairs, installations, and inspections, whether at a service center or in the field directly at customer homes, businesses, or other convenient locations. Identify and explain the Rivian product line, EV framework, tools, and accessories. Utilize available technical resources to follow Rivian repair procedures efficiently without compromising quality or safety. Conduct road tests to ensure the quality of repairs. Manage necessary parts operations, including ordering, receiving, shipping, and inventory. Identify areas of improvement and provide feedback to senior technicians or leadership. Support service campaigns and containment initiatives. Ensure that all work and technical notes are properly documented for internal and external use. Work collaboratively with a team spirit and maintain high-quality work with minimal supervision. Communicate with a high level of professionalism in customer-facing situations. Stay current with technical skills and complete required training.

Job Description At PEARCE, we've got a career for you! Join the nation's leading independent service provider for critical telecommunication and renewable energy infrastructure. We are the premier independent service provider for our nation's critical infrastructure. With over 2,500 team members nationwide, Pearce delivers comprehensive engineering, maintenance, repair, and repowering solutions, ensuring the seamless operation of our nation's wireless and wireline telecom, commercial and utility-scale solar and wind projects, EV charging stations, as well as large-scale power generation, critical power and energy storage assets. Your Impact The Advanced Solar Field Service Technician (Operations and Maintenance) in the PEARCE Renewables Solar Operations and Maintenance Division performs tasks involving physical labor at solar energy sites near Madera, California. The Solar Field Service Technician is responsible for the operation and maintenance (O&M) of solar power plants in accordance with established preventative and corrective maintenance standards while always maintaining safety and professionalism. These are local sites-candidates should reside within 50 miles of the Madera, California areas. Core Responsibilities Conduct preventative and corrective maintenance of Solar Utility and Sub-Station equipment. Responsible for documentation including, but not limited to, work orders, time logs, inventory control, and emergency information schedules. Provide a working knowledge of troubleshooting electrical components with help and use of digital multi-meters, meggers, amp clamps, and similar equipment. Testing/troubleshooting installed Solar equipment and ensuring proper working order. Must have a strong safety background with experience in Lock Out Tag Out (LOTO) and Job Hazard Analysis (JHA). Able work in a solo as well as a group environment. Operate and maintain a motor vehicle safely and legally per the PEARCE Renewables Employee Handbook and insurance requirements. Specific duties may vary or evolve over time based on business and client needs. Core Experience 2+ years' experience in Commercial/Industrial operations and maintenance (O&M) on solar power plants is preferred. Preventative maintenance experience on Solar Utility equipment is preferred. Candidates should possess strong mechanical and electrical experience with troubleshooting and installation skills. Specific solar experience with Inverters, Tracker Systems, or Sub-Stations Equipment (TMEIC/SMA/Sungrow/Nextracker/ATI, etc.) is preferred. Takes initiative to escalate issues at site. Ability to train, mentor, and develop laborers into Apprentices. High aptitude and a strong work ethic are a must. Physical/Work Environment At Pearce safety is our number one concern. Candidates must be able to comply with OSHA Standards. Must live within approximately 50 miles of the Madera, California areas. Be exposed to ambient temperatures while working outdoors. Lift and move equipment as needed (up to 50 pounds). Employment may require working on weekends and holidays, including an "on call" service availability via telephone/text message. Travel requirements dependent on support of the company (up to 25% travel). Compensation: $25.00-$42.00 hourly/DOE At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$300-$500 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. At PEARCE, we are an equal opportunity employer dedicated to cultivating an inclusive environment that empowers employees to excel and make a meaningful impact, providing a dynamic space for field technicians, service specialists, and corporate professionals to flourish and propel their careers forward within our nationwide presence and expansive service offerings. Learn more about us at ************************

Responsibilities / Tasks GEA Group, founded in Germany in 1881, is a global leader in engineering solutions, serving industries such as food and beverage, pharma, dairy, and more. With over 18,000 employees worldwide and a strong U.S. presence since 1929, GEA combines the heritage of a well-established company with the innovation of a forward-thinking industry leader. At GEA, we're not just building equipment, we're building lasting careers with an average employee tenure range from 8 + years, reflecting the strong culture, growth opportunities, and support we provide. Start strong - Medical, dental, and vision coverage begins on your first day Recharge and refresh - Enjoy 12 paid holidays, including a flexible floating holiday, and 136 hours of PTO to relax or explore Invest in your future - A 7% 401(k) employer match helps grow your retirement savings faster Keep learning - Take advantage of tuition reimbursement to further your education or skillset Live well - Our wellness incentive program rewards healthy habits Get support when you need it - Access to a confidential Employee Assistance Program for personal or professional guidance Save smart - Flexible Health Savings and Spending Accounts to manage out-of-pocket expenses The typical base pay range for this position at the start of employment is expected to be between $31 - $45 per hour. GEA Group has different base pay ranges for different work locations within the United States. The pay range is not guaranteed compensation or salary. The estimated range is the budgeted amount for the position. Final offers are based on various factors, including skill set, experience, location, qualifications, and other job-related reasons. You may be eligible for additional rewards, such as a discretionary bonus (based on eligibility) and/or equity awards. As a Field Service Technician, you will assist with the installation and commissioning of liquid processing and food projects, providing on-site and remote troubleshooting. You will support Service Sales and Customer Service Representatives with service agreements, spare parts, upgrades, and process optimization. With expertise in industry-specific equipment, you'll help design and estimate service projects, ensure accurate reporting, and maintain customer relationships. Travel up to 75% is required, along with a valid driver's license. Assist with installation and/or commissioning and decommissioning of new liquid processing and new food projects. Support customers both remote and on site with troubleshooting mechanical and process issues. Support Service Sales, and CSR's for quoting and execution of SLA's, Emergency Service, Spare Parts, Upgrade and Modernization, etc. Specification of process equipment including size and materials of construction. Assist with designing, estimating, and executing service projects as necessary. Solid understanding of Heat, Process Flow, Mass Balance, Instrumentation, and Production Diagrams. Solid understanding of technical process and equipment design within the food industry such as (UHT / Pasteurization Systems, Aseptic Process, Valves, Pumps, Deaerators, Heat Exchangers, etc). Support customers in process optimization and product quality improvements. Write clear and thorough service tickets, start-up reports, inspection reports, customer visit reports within 10 days of completion of work for internal and external use. Submits all time sheets, expense reports (within 30 days), and other required paperwork within the required timeframe. Recommend parts for future service visits, customer inventory, and available upgrades and optimizations. Meets with customer at site to go over the nature of the service visit prior to beginning work. Meets with customer at site to review work completed and discuss any next steps. Provide accurate estimates of labor times to complete service visits / rebuilds. Provide simple operator training to customers for proper operation, preventive maintenance. Assist with recommendations for improved tools, procedures, etc for the service operations. Adheres to OSHA, company safety policies, procedural guidelines and works in a consistently safe manner. Must have a valid driver's license. Ability to travel up to 75%. Performs other duties as assigned. Your Profile / Qualifications Education & Skills: High school diploma or equivalent required. 5+ years' experience in a similar position to include Rockwell PLC and HMI experience. Liquid Processing, UHT and aseptic experience preferred. Ability to read and understand instruction manuals, P&IDs, assembly drawings, PLC and HMI code, troubleshoot software, electrical, and mechanical problems. Skilled with hand and power tools for installing and servicing automated machinery. Proficient with Microsoft products including Word, Excel, Outlook, etc. Fluent in English both verbally and written. Able to work independently with minimal supervision but also work as part of a team. #engineeringforabetterworld GEA Group is committed to fostering an inclusive work environment where all clients and employees feel welcomed, accepted and valued. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Did we spark your interest? Then please click apply above to access our guided application process.

Do you enjoy troubleshooting and maintaining electrical equipment? Do you thrive in a role that allows you to work independently while still being part of a collaborative team environment? Are you interested in developing lasting relationships with customers? Imagine having access to a company-supplied van and gas card, along with the opportunity to work for a company that has upheld its core values of prioritizing customer, employee, and vendor satisfaction since its inception. This is the unique experience offered at Raymond, where employees often choose to stay for the long term. Join us for a rewarding career like no other. Raymond West is looking for a dynamic Experienced Field Service Technician to join the Service team! The Experienced Field Service Technicians to service, troubleshoot, and repair all makes of material handling equipment at customer locations. Prior mechanical work experience is required. Raymond West is committed to providing our customers with end-to-end warehouse solutions. We bring you our industry-leading expertise in lift trucks, racking, conveyor, dock and door, rentals, parts, and service. Our customers trust us to provide the right supply chain solutions and services to keep their business up and running. Duties and Responsibilities: Repair all types of equipment that Raymond West sells and services. Update training and skills on a continuing basis. Train other employees as needed. Maintain a profitable billing level. Follow all Service Department procedures. Communicate with assigned Field Supervisor. Complete all paperwork transactions in a timely, neat, accurate and orderly fashion. Communicate all options to customers before proceeding with work. Have the necessary tools to perform repair and scheduled service work. Complete jobs within quoted time limits when applicable. Maintain a clean and orderly (inside and outside) vehicle. Maintain an accurate assigned parts inventory, if applicable. Represent the entire company at all times. Pass Raymond Certification and re-certification if applicable. Maintain good working knowledge of customers and equipment in assigned areas. Maintain an acceptable driving record as established by the company's insurance carrier. Report accidents whether self or customer. Account for 100% of available time during working hours. Must be willing to work overtime when necessary. Must coordinate all overtime with assigned supervisor. Must follow all procedures in the company's Employee Handbook. Must follow safety procedures and use good judgment in regard to safety. Must be willing to work out of town as necessary. Establish a positive rapport with customers. Perform other specific duties and projects as assigned by the Service Supervisors or Managers. Required Skills/Abilities: Excellent written and verbal communication skills Ability to read, write and speak English fluently Excellent Organizational Time Management skills Proficient in Microsoft office Suite and similar software Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to speak effectively before groups of customers or employees of an organization. Must be able to maintain effective working relationships with employees, Co-workers, and Managers in other departments Must be willing to work off-hours as specific needs dictate and willing to assume more responsibility as required Must be able to fulfill essential job function in a consistent state of alertness and safe manner. Must be self-motivated and able to manage time efficiently. Must be customer oriented. Able to exhibit professional behavior at all times. Willing to follow mandates and procedures of the Service Department. Ability to deal with customers on a face-to-face basis. Maintain a sound working relationship with other technicians and fellow workers. Must pass all available certificates appropriate to the position. Must have working knowledge of basic D.C. electricity, basic A.C. electricity, internal combustion, and diesel engines. Ability to write routine reports and correspondence. Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form. Raymond Level 1 Certified or working towards that goal, if applicable. Must possess a valid driver's license with no more than the allowable level of points on record, if applicable. Maintain personally owned tools according to approved minimum tool list. Maintain additional tools as required by duties and certification level. Must be able to take direction. Must be a team player, i.e., to work with peers. Must have working knowledge of hydraulic systems. Must have mechanical abilities. Must maintain a clean, neat, and professional appearance. Willing and able to learn quickly and perform accurately and neatly with a degree of flexibility. Motivated to continuous self-development and training. Willing to assume more responsibility as required. Education/Experience: High school diploma, general education degree (GED) or equivalent. 2+ years prior mechanical experience in the material handling or large equipment industry Familiarity and ownership of hand tools is required Knowledge of internal combustion engines is helpful, but not required. Travel Requirement: This position will be based in the field and require daily travel within assigned territories, Technicians will be provided a company vehicle and a company Fuel Card to pay for vehicle expenses. Must be able to be insured by Raymond West Physical Requirements: Position is non-Sedentary Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The employee is regularly exposed to moving mechanical parts. Position will be required to go onto job sites to perform duties where construction is underway. The employee must frequently lift and/or move up to 50 pounds. The position will require employee to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to smell. Position requires the employee to climb/balance/stoop/kneel/crouch and crawl The employee is frequently exposed to outside weather conditions and risk of electrical shock. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; extreme cold; extreme heat; and vibration. The noise level in the work environment is sometimes loud. Pay Range: The hourly range for this position is $20.60 - $50.40. The specific pay offered to a candidate may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Qualified candidates must be able to pass a pre-employment physical and drug screen. Raymond West provides medical, dental, vision, 401k with company match, flexible spending accounts, disability insurance, life insurance, personal time off, holiday pay and a great team to work with! Check us out at ******************** Raymond West has a great group of loyal and hardworking employees who help us maintain our exemplary level of sales and service. Apply on-line via the submit resume button provided. We are an equal opportunity employer and encourage all qualified persons to apply. We encourage qualified military veterans and persons with disabilities to submit their resume online. We will consider qualified applicants with criminal histories in accordance with the FCO. We are a drug free company. This contractor and subcontractor shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibit discrimination against all individuals based on their race, color, religion, sex, or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, national origin, protected veteran status or disability.

Sinclair Systems International, LLC is the label supplier to the citrus, apple, stone fruit, avocado and greenhouse tomato packer/shippers of the world. We offer our customers a complete labeling solution that consists of custom food-safe produce labels, innovative machine application systems and specialized expert technical service. Our market leadership relies on motivated team members that are committed to customer satisfaction, are results oriented and strive for excellence. We are seeking an experienced Field Service Technician in Fresno, California and surrounding areas to install, repair and maintain machinery and equipment, respond to service calls, and conduct maintenance overhauls at customer sites. This is a hands-on role that requires strong technical knowledge and the ability to troubleshoot and resolve issues in a timely manner. Key contacts: Sinclair Customer, Sinclair Agent, Label Manufacturing Team, Sales, Engineering. Key Performance Indicators Customer Relationship, Timely Response to Service Calls, Scheduled Maintenance Overhauls, Manage Time Effectively, Team Player Key Accountabilities Installs, repairs and maintains machinery and equipment and provides value added technical service to customers by performing the following duties. Key Duties and Responsibilities Installs equipment at customer packing sites and trains customer's employees to operate and maintain that equipment. Performs preventative maintenance on equipment at customer sites as defined by the Sinclair Scheduled Maintenance Plan (SMP). Overhauls and updates equipment in the field or in Sinclair shops as defined by the Sinclair Scheduled Maintenance Plan (SMP). Provides technical support to customers and Sinclair contracted representatives. Maintains equipment service records, and assist with documenting equipment configurations etc. Monitors and maintains spare parts inventories in Sinclair service vehicle, workshop and customer sites. Monitors customer label inventories and communicates possible label requirements to the sales department. Assists the engineering department by testing and evaluating new components as well as reporting on current component reliability. Assists in evaluating both Sinclair and competitive machinery & equipment in the field. Maintains up-to-date knowledge of all models of Sinclair equipment and ensures that customers are given appropriate information and/or assistance to optimize the use of that equipment. Obtains measurements and other details of customer equipment onto which equipment may be installed. Assists in training and performance monitoring of contracted service personnel as directed. Assists in service activities previously stated outside of own territory, as directed. Participates in special projects as required, both in and out of own territory. Other duties assigned. Supervisory Responsibilities None. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee must regularly lift and /or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts. The noise level in the work environment is usually moderate. Sinclair Systems International - Person Specification JOB TITLE: Field Service Technician Essential Desirable Qualifications Experience servicing electro-mechanical equipment. Sound mechanical ability and basic understanding of AC and DC circuits, motors and controllers. Ability to troubleshoot and repair electrical circuits using schematic drawings and electrical test equipment. Practical experience with personal computers is required for file management, report writing, etc. Travel domestically and internationally as required; primarily within the US, Canada and Mexico. Valid Driver's License. Ability to communicate effectively with customers' management as well as machine operators while maintaining a positive customer oriented attitude. After appropriate training Service Technicians must be capable of understanding label making processes and the problems that can occur with labels. Excellent attention to detail, Excellent organizational and communications skills. Ability to work within a team environment and with external partners. In a fruit packing shed or processing environment. Use of a DMM or Oscilloscope. Computer literacy w/databases, word processing, spreadsheets. Passport DMV print out Experience Associate's degree (A. A.) or equivalent from two-year College or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Personal Attributes Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Follow Sinclair's Fleet Management Policy

Do you enjoy troubleshooting and maintaining electrical equipment? Do you thrive in a role that allows you to work independently while still being part of a collaborative team environment? Are you interested in developing lasting relationships with customers? Imagine having access to a company-supplied van and gas card, along with the opportunity to work for a company that has upheld its core values of prioritizing customer, employee, and vendor satisfaction since its inception. This is the unique experience offered at Raymond, where employees often choose to stay for the long term. Join us for a rewarding career like no other. Raymond West is looking for a dynamic Experienced Field Service Technician to join the Service team! The Experienced Field Service Technicians to service, troubleshoot, and repair all makes of material handling equipment at customer locations. Prior mechanical work experience is required. Raymond West is committed to providing our customers with end-to-end warehouse solutions. We bring you our industry-leading expertise in lift trucks, racking, conveyor, dock and door, rentals, parts, and service. Our customers trust us to provide the right supply chain solutions and services to keep their business up and running. Duties and Responsibilities: Repair all types of equipment that Raymond West sells and services. Update training and skills on a continuing basis. Train other employees as needed. Maintain a profitable billing level. Follow all Service Department procedures. Communicate with assigned Field Supervisor. Complete all paperwork transactions in a timely, neat, accurate and orderly fashion. Communicate all options to customers before proceeding with work. Have the necessary tools to perform repair and scheduled service work. Complete jobs within quoted time limits when applicable. Maintain a clean and orderly (inside and outside) vehicle. Maintain an accurate assigned parts inventory, if applicable. Represent the entire company at all times. Pass Raymond Certification and re-certification if applicable. Maintain good working knowledge of customers and equipment in assigned areas. Maintain an acceptable driving record as established by the company's insurance carrier. Report accidents whether self or customer. Account for 100% of available time during working hours. Must be willing to work overtime when necessary. Must coordinate all overtime with assigned supervisor. Must follow all procedures in the company's Employee Handbook. Must follow safety procedures and use good judgment in regard to safety. Must be willing to work out of town as necessary. Establish a positive rapport with customers. Perform other specific duties and projects as assigned by the Service Supervisors or Managers. Required Skills/Abilities: Excellent written and verbal communication skills Ability to read, write and speak English fluently Excellent Organizational Time Management skills Proficient in Microsoft office Suite and similar software Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to speak effectively before groups of customers or employees of an organization. Must be able to maintain effective working relationships with employees, Co-workers, and Managers in other departments Must be willing to work off-hours as specific needs dictate and willing to assume more responsibility as required Must be able to fulfill essential job function in a consistent state of alertness and safe manner. Must be self-motivated and able to manage time efficiently. Must be customer oriented. Able to exhibit professional behavior at all times. Willing to follow mandates and procedures of the Service Department. Ability to deal with customers on a face-to-face basis. Maintain a sound working relationship with other technicians and fellow workers. Must pass all available certificates appropriate to the position. Must have working knowledge of basic D.C. electricity, basic A.C. electricity, internal combustion, and diesel engines. Ability to write routine reports and correspondence. Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form. Raymond Level 1 Certified or working towards that goal, if applicable. Must possess a valid driver's license with no more than the allowable level of points on record, if applicable. Maintain personally owned tools according to approved minimum tool list. Maintain additional tools as required by duties and certification level. Must be able to take direction. Must be a team player, i.e., to work with peers. Must have working knowledge of hydraulic systems. Must have mechanical abilities. Must maintain a clean, neat, and professional appearance. Willing and able to learn quickly and perform accurately and neatly with a degree of flexibility. Motivated to continuous self-development and training. Willing to assume more responsibility as required. Education/Experience: High school diploma, general education degree (GED) or equivalent. 2+ years prior mechanical experience in the material handling or large equipment industry Familiarity and ownership of hand tools is required Knowledge of internal combustion engines is helpful, but not required. Travel Requirement: This position will be based in the field and require daily travel within assigned territories, Technicians will be provided a company vehicle and a company Fuel Card to pay for vehicle expenses. Must be able to be insured by Raymond West Physical Requirements: Position is non-Sedentary Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The employee is regularly exposed to moving mechanical parts. Position will be required to go onto job sites to perform duties where construction is underway. The employee must frequently lift and/or move up to 50 pounds. The position will require employee to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to smell. Position requires the employee to climb/balance/stoop/kneel/crouch and crawl The employee is frequently exposed to outside weather conditions and risk of electrical shock. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; extreme cold; extreme heat; and vibration. The noise level in the work environment is sometimes loud. Pay Range: The hourly range for this position is $20.60 - $50.40. The specific pay offered to a candidate may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Qualified candidates must be able to pass a pre-employment physical and drug screen. Raymond West provides medical, dental, vision, 401k with company match, flexible spending accounts, disability insurance, life insurance, personal time off, holiday pay and a great team to work with! Check us out at ******************** Raymond West has a great group of loyal and hardworking employees who help us maintain our exemplary level of sales and service. Apply on-line via the submit resume button provided. We are an equal opportunity employer and encourage all qualified persons to apply. We encourage qualified military veterans and persons with disabilities to submit their resume online. We will consider qualified applicants with criminal histories in accordance with the FCO. We are a drug free company. This contractor and subcontractor shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibit discrimination against all individuals based on their race, color, religion, sex, or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, national origin, protected veteran status or disability.

Do you enjoy troubleshooting and maintaining electrical equipment? Do you thrive in a role that allows you to work independently while still being part of a collaborative team environment? Are you interested in developing lasting relationships with customers? Imagine having access to a company-supplied van and gas card, along with the opportunity to work for a company that has upheld its core values of prioritizing customer, employee, and vendor satisfaction since its inception. This is the unique experience offered at Raymond, where employees often choose to stay for the long term. Join us for a rewarding career like no other. Raymond West is looking for a dynamic Experienced Field Service Technician to join the Service team! The Experienced Field Service Technicians to service, troubleshoot, and repair all makes of material handling equipment at customer locations. Prior mechanical work experience is required. Raymond West is committed to providing our customers with end-to-end warehouse solutions. We bring you our industry-leading expertise in lift trucks, racking, conveyor, dock and door, rentals, parts, and service. Our customers trust us to provide the right supply chain solutions and services to keep their business up and running. Duties and Responsibilities: Repair all types of equipment that Raymond West sells and services. Update training and skills on a continuing basis. Train other employees as needed. Maintain a profitable billing level. Follow all Service Department procedures. Communicate with assigned Field Supervisor. Complete all paperwork transactions in a timely, neat, accurate and orderly fashion. Communicate all options to customers before proceeding with work. Have the necessary tools to perform repair and scheduled service work. Complete jobs within quoted time limits when applicable. Maintain a clean and orderly (inside and outside) vehicle. Maintain an accurate assigned parts inventory, if applicable. Represent the entire company at all times. Pass Raymond Certification and re-certification if applicable. Maintain good working knowledge of customers and equipment in assigned areas. Maintain an acceptable driving record as established by the company's insurance carrier. Report accidents whether self or customer. Account for 100% of available time during working hours. Must be willing to work overtime when necessary. Must coordinate all overtime with assigned supervisor. Must follow all procedures in the company's Employee Handbook. Must follow safety procedures and use good judgment in regard to safety. Must be willing to work out of town as necessary. Establish a positive rapport with customers. Perform other specific duties and projects as assigned by the Service Supervisors or Managers. Required Skills/Abilities: Excellent written and verbal communication skills Ability to read, write and speak English fluently Excellent Organizational Time Management skills Proficient in Microsoft office Suite and similar software Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to speak effectively before groups of customers or employees of an organization. Must be able to maintain effective working relationships with employees, Co-workers, and Managers in other departments Must be willing to work off-hours as specific needs dictate and willing to assume more responsibility as required Must be able to fulfill essential job function in a consistent state of alertness and safe manner. Must be self-motivated and able to manage time efficiently. Must be customer oriented. Able to exhibit professional behavior at all times. Willing to follow mandates and procedures of the Service Department. Ability to deal with customers on a face-to-face basis. Maintain a sound working relationship with other technicians and fellow workers. Must pass all available certificates appropriate to the position. Must have working knowledge of basic D.C. electricity, basic A.C. electricity, internal combustion, and diesel engines. Ability to write routine reports and correspondence. Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form. Raymond Level 1 Certified or working towards that goal, if applicable. Must possess a valid driver's license with no more than the allowable level of points on record, if applicable. Maintain personally owned tools according to approved minimum tool list. Maintain additional tools as required by duties and certification level. Must be able to take direction. Must be a team player, i.e., to work with peers. Must have working knowledge of hydraulic systems. Must have mechanical abilities. Must maintain a clean, neat, and professional appearance. Willing and able to learn quickly and perform accurately and neatly with a degree of flexibility. Motivated to continuous self-development and training. Willing to assume more responsibility as required. Education/Experience: High school diploma, general education degree (GED) or equivalent. 2+ years prior mechanical experience in the material handling or large equipment industry Familiarity and ownership of hand tools is required Knowledge of internal combustion engines is helpful, but not required. Travel Requirement: This position will be based in the field and require daily travel within assigned territories, Technicians will be provided a company vehicle and a company Fuel Card to pay for vehicle expenses. Must be able to be insured by Raymond West Physical Requirements: Position is non-Sedentary Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The employee is regularly exposed to moving mechanical parts. Position will be required to go onto job sites to perform duties where construction is underway. The employee must frequently lift and/or move up to 50 pounds. The position will require employee to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to smell. Position requires the employee to climb/balance/stoop/kneel/crouch and crawl The employee is frequently exposed to outside weather conditions and risk of electrical shock. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; extreme cold; extreme heat; and vibration. The noise level in the work environment is sometimes loud. Pay Range: The hourly range for this position is $20.60 - $50.40. The specific pay offered to a candidate may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Qualified candidates must be able to pass a pre-employment physical and drug screen. Raymond West provides medical, dental, vision, 401k with company match, flexible spending accounts, disability insurance, life insurance, personal time off, holiday pay and a great team to work with! Check us out at ******************** Raymond West has a great group of loyal and hardworking employees who help us maintain our exemplary level of sales and service. Apply on-line via the submit resume button provided. We are an equal opportunity employer and encourage all qualified persons to apply. We encourage qualified military veterans and persons with disabilities to submit their resume online. We will consider qualified applicants with criminal histories in accordance with the FCO. We are a drug free company. This contractor and subcontractor shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibit discrimination against all individuals based on their race, color, religion, sex, or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, national origin, protected veteran status or disability.

“We engage in creating employment success for high caliber military veterans and world class companies.” Our recruiting service is free to all applicants, we are paid by the employers we represent. Veterans, Prime, Inc. is interviewing talented individuals for full-time career opportunities! We partner with amazing companies seeking highly skilled technical military and veteran talent for nationwide Field Service Technician roles. Requirements: Must have training and practical experience troubleshooting electro-mechanical systems including, but not limited to, vessels, aircraft, ground support equipment, vehicles, etc… Must be proficient in reading technical manuals, schematics, wiring diagrams and in the use of testing equipment such as multi meters. Must be able to relocate regionally (southeast, mid-atlantic, northeast, midwest, southwest, west, northwest) provide us a region so we can match you with the best opportunity. Must have a desire to travel extensively overnights throughout the U.S. Must have better than average customer service and people skills. What is in it for you? The ability to interview with employers and hiring managers that recognize your value… hiring managers are either veterans themselves or hire veterans extensively. The ability to hone and expand your technical skills in commercial and private industry. The ability to work with companies that have the resources, sales, and respect throughout industry to offer you a stable, long term position. The ability to make total yearly compensation in the $55,000 to $100,000 range depending on experience. The ability to travel, meet new customers, and experience new challenges on every call. This is not the traditional “show up to the same location and work the same hours every day” position. Contact us: If you meet the above criteria, please respond to us by submitting your resume and answering our applicant questions. Once submitted, we will schedule a call based on your interest and qualifications for these opportunities. You may also contact us directly at *************************

Job Description If you are a problem solver who is detail-oriented and capable of multi-tasking, we want to talk to you! We are looking for experienced technicians. WiZiX Technology Group - Field Service Technician We are looking for a qualified candidate responsible for a full range of repairs and service procedures on copiers/printers. Good communication skills, a valid driver's license with a clean DMV record, and stable work history with verifiable references are required. Some lifting necessary. Job Responsibilities: Troubleshooting and repairing office equipment (copiers, printers, fax machines, etc.) Providing high-quality technical support to our customer base Communicating with customers to ensure satisfaction Developing options to solve unusual problems Managing time, resources and territorial considerations Qualifications: Mechanical and Electrical Mindset IT literate Experience and training with Toshiba, Ricoh, Savin, Kyocera, Brother, Lexmark, and other manufacturers is desired Production experience is a plus Strong computer knowledge We promote a culture of growth and believe that each employee can make a difference-no matter your role or level of experience. Just as we aim to help our customers grow their businesses through technology, we offer our own employees growth opportunities to reach their career goals. Among our company goals, we aim to be a long-term employer. That means providing our team with the training and certification they need to keep up with the fast-changing technology our office machines, devices and software employ. About WiZiX: WiZiX Technology Group, Inc. is a leading provider of office equipment & technology solutions in California and Nevada. WiZiX offers a wide range of products, including Copiers, Printers, Scanners, and other office equipment from top brands such as Kyocera, Toshiba, Ricoh, and Brother. WiZiX also provides VoIP Phone Systems, Managed Print Services, Document Management Systems, EV Charging Stations. At WiZiX, our mission is to provide the highest level of customer service, support, and technology solutions to our clients, enabling them to focus on growing their business and achieving their goals without having to worry about their office technologies.

Expect more. Connect more. Be more at Diebold Nixdorf. Our teams automate, digitize, and transform the way more than 75 million people around the globe bank and shop in this hyper-connected, consumer-centric world. Join us in connecting people to commerce in this vital, rewarding role. Installs, debugs and provides technical maintenance for product and component hardware and software, mainly on customer premises. Provides scheduled inspection, cleaning and other services and performs minor product repairs within an assigned territory. Inspects products for correct operation and resolves noted issues and / or escalates according to established procedure. Schedules services, completes all required paperwork and works with customers to ensure satisfaction with service delivery and understanding of product functionality.

Golden State Peterbilt located at 4390 S. Bagley Ave Fresno CA. who is a subsidiary of E.M. Tharp Inc. is currently seeking Journey Level 3-4 Technicians to join our growing team! This position is an essential position to the Service Department who performs advanced diagnostics and repairs on heavy-medium duty diesel engines, transmissions, brakes, and other systems. Troubleshoot complex issues using diagnostic software, technical manuals, and experience. Conduct thorough inspections and preventive maintenance to ensure fleet vehicles meet safety and performance standards. Benefits: $32 - $45 Full Time Hourly Pay Monthly Bonus Program 401k health, dental, vision, HSA/FSA plans available and life insurance plans Paid vacation, floating holiday, and sick leave. Seven paid holidays per year. Essential Duties and Responsibilities Extensive knowledge of heavy truck systems and components, including engines, drive-trains, and emissions systems. Proficiency in using diagnostic tools and software to identify and resolve mechanical and electrical issues. Strong problem-solving abilities and the ability to prioritize tasks in a fast-paced environment. Qualifications and Skills To effectively perform the duties of a Service Technician Level 3-4 individuals must be able to demonstrate several competencies that are essential to the position, which include: Leadership qualities to effectively advise junior technicians. Excellent communication skills for interacting with colleagues, customers, and parts suppliers. Commitment to safety protocols and regulations governing the maintenance and repair of commercial vehicles. Collaborate with foremen and parts department to coordinate repairs and order necessary components. Clear and effective communication skills, both verbal and written, to convey technical information in the technician notes and to the foreman and or manager. Good written, verbal, and interpersonal communication abilities. Must be dependable, able to follow instructions, respond to management direction, and must be able to improve performance through management feedback. Good computer skills. Education and Experience: Any combination of training and experience which would provide the required knowledge, skills, and abilities is qualifying. A typical way to obtain the required qualifications would be: Five years (2) of increasingly responsible experience in Technician work in a heavy/medium-duty application. Licenses and Certifications: Possession of, or ability to obtain, a valid Class C California driver's license. Class A preferred. Not required but preferred - completion of a diesel technology program or apprenticeship Certification as a journeyman diesel technician or similar credential demonstrating mastery of the trade. Ongoing training to stay current with advancements in diesel technology, emissions standards, and safety regulations. Work Environment: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. While performing the duties of this job, the employee is regularly required to stand, walk, climb or balance, stoop, kneel, crouch or crawl. The employee is occasionally required to sit. The employee must regularly lift/push or pull/or move up to 60 pounds. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to wet and/or humid conditions, extreme heat, and vibration. The employee is exposed to fumes or airborne particles, toxic chemicals, and outside weather conditions. The noise level is normally loud. Proper safety gear must be always worn. A standard 40-hour work week applies. E.M. Tharp is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

About us: At Pacific Equipment Solutions, we're committed to helping our clients run their businesses and warehouses with speed, efficiency, and accuracy. Our clients value top performance forklifts and trucks, and they want to ensure their vehicles are being used to increase productivity all around. With branches in Salinas, Hayward, Sacramento, Fresno, Modesto and Las Vegas, we represent some of the biggest names in the forklift industry including Hyundai, Noblelift, Comblift, and more. Every member of PMHSI abides by our 5 key core values: satisfaction, urgency, inclusion, transparency and innovation. About the role: We are seeking a dedicated and skilled Field Service Technician to join our team. The ideal candidate will be responsible for installing, maintaining, and repairing equipment at customer locations. This role requires strong technical skills, excellent problem-solving abilities, and a commitment to customer satisfaction. Responsibilities: · Installation: Setting up and testing new equipment to ensure it functions correctly. · Maintenance: Performing routine checks and preventive maintenance to keep equipment in optimal working order. · Repair: Diagnosing and fixing equipment issues by replacing parts or making necessary repairs. · Troubleshooting: Using diagnostic tools and knowledge to identify the root cause of a problem. · Customer service: Communicating with clients, explaining how to use products, and answering questions. · Documentation: Completing accurate paperwork, work orders, and reports in a timely manner. · Customer support: Follows up with customers, handles complaints, and ensures customer satisfaction. · Collaboration: Collaborating with team members to improve service processes. Staying up to date on all industry trends and advancements in technology. Requirements Candidate requirements: · Experience: Proven experience as a Field Service Technician or similar role. · Technical knowledge: Strong mechanical and electrical troubleshooting skills. · Communication: Excellent verbal and written communication skills are essential for interacting with customers and staff. · Customer service: The ability to provide friendly, professional, and patient service, especially when dealing with customer concerns. · Organizational skills: The ability to manage multiple tasks, schedules, and work orders simultaneously. The ability to work independently and manage time effectively. · Computer proficiency: Proficiency in using diagnostic tools and software. · Driver's License: A valid driver's license and willingness to travel to client sites. Education requirements: · A high school diploma or equivalent is typically required. Some technical or vocational training is a plus. Experience requirements: · Requires a minimum of 2-5 years' experience in the equipment service industry as a Field Service Technician or similar role. Salary Description $32-$38 an hour

A Level III Field Service Technician will utilize their technical expertise and independent judgment to provide on-site servicing, installation, and repair of complex electromechanical equipment. This role is crucial in maintaining high customer satisfaction through data-driven tools, proactive attention to customer needs, and positive interactions. Responsibilities include supporting customers with operational or maintenance issues, addressing escalated technical and service-related concerns, diagnosing failures in mechanical, hardware, software, and systems, implementing effective repairs to minimize downtime, and preparing reports for analyzing product failure trends and serviceability issues. Additionally, this role will also assist with the on-site training and development of less experienced field service technicians and acts as a key communication link between technical support, management, and the customer on technical matters and projects. Flexibility for long hours and travel is required. Duties/Responsibilities Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. Apply company policies and procedures to complete routine tasks effectively. Respond promptly to service calls, perform equipment maintenance at customer sites, and assist operators with operational issues. Represent the company professionally at all times. Handle administrative tasks, including record-keeping, reporting, and inventory management, with accuracy and timeliness. Develop and maintain technical competence through formal training programs, on-site training, and hands-on experience. Comply with company policies regarding confidentiality and customer procedures, including Custody and Control Procedures. Manage parts inventory, coordinate shipments for repair and replenishment, and oversee the inventory of tools and test equipment. Record maintenance activities using approved methods and procedures. Follow escalation procedures to resolve issues promptly and ensure timely communication with designated company personnel and customer management. Promote high customer satisfaction by maintaining open communication and providing proactive attention to customer needs. Assist with the on-site training of less experienced field service technicians. Show flexibility to travel as required to support business needs, including providing coverage for other Field Engineers during vacations or illnesses. Travel may be within the home territory or to other areas. Perform all activities safely and adhere to company safety policies and procedures. Complete other duties as assigned. Required Skills/Abilities Hands-on experience with electromechanical equipment is preferred. Proficiency in electromechanical troubleshooting, understanding electronic principles, and working knowledge of computer systems, PCs, and networking is required. Experience with solenoids, belts, rollers, bearings, pneumatics, and guides is a plus. Strong oral and written communication skills are essential. Ability to use a laptop/tablet for administrative and diagnostic tasks. Willingness to provide personal information and obtain Gaming Licenses in required jurisdictions (for Commercial Field Service Technicians). Work may be home office-based or customer site-based. Personal vehicle use may be required depending on business needs. Potential responsibility for a company fleet vehicle may be required depending on business needs. Shift work may be required. Required Education and Experience High school diploma or GED required. An Associate degree or trade/technical school certificate/diploma preferred. Minimum of four (4) years of relevant work experience, including at least two years in a field service environment. Hands-on experience with electromechanical equipment is essential. Previous experience in customer-facing roles is required. Salary Range $68,000 - $75,000 Other Duties This job description is not intended to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee. Duties, responsibilities, and activities may change at any time with or without notice. $$ Giesecke+Devrient Currency Technology America, Inc. endeavors to make ***************************** accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact Human Resources at ************* or *******************. Giesecke+Devrient Currency Technology America, Inc. is an Equal Opportunity Employer - M/F/Veteran/Disability/Sexual Orientation/Gender Identity $$ $$ $$ $$ $$ *************************************************************************************************************

Job Type: Full-time Pay: $25.00 - $30.00 per hour based on experience Supplemental Pay: Overtime pay Performance bonus Schedule: Extended hours Monday to Friday On call Company Overview ACT Power Services was created to provide industry leading services for our clients. As an independent service provider, we avoid conflicts of interest and maintain a complete focus on our clients' needs. We have taken a no-frills approach to developing our organization to ensure our clients are only paying for services that add value. ACT then leverages a world-class team, state of the art technology, and best-in-class operating practices to ensure every facility is operated in a manner that maximizes production, preserves compliance, and ensures the safety of our personnel and communities. Our vision is to reshape the industry's benchmark for renewable operations and create the next generation of O&M provider. Job Description The Solar Maintenance Technician is and entry-level position responsible for the safe, productive repairs and maintenance of Commercial and Utility Scale Solar PV plants. From performing preventative maintenance and inspections, to troubleshooting and making repairs to maximize production, the Solar Maintenance Technician gets to exercise a verity of skill sets and has constant opportunities to learn more. All while making an impact on our safe, reliable, clean energy future. This role will encompass performing the preventative and corrective maintenance on the solar modules, strings, trackers, and inverters. Responsibilities Uphold a high level of safety standards in everything that you do Conducting routine preventive maintenance, service, troubleshooting and repair of solar photovoltaic facilities Willingness to learn the NEC code, electrical theory, and industry best practices DC and AC testing included but not limited to polarity, open circuit voltage, grounding continuity, communication, insulation resistance testing, I-V curve tracing Interpret schematics to understand system layouts and connections Maintain a schedule for routine maintenance, service, trouble shooting and repair of equipment at solar photovoltaic facilities including but not limited to: Single Axis trackers, Central or String Inverters, Transformers, AC and DC disconnects, Substation equipment Maintaining company property such as vehicle, tools, meters and plant stock Maintaining service reports, inspection documentation, safety paperwork, and spare parts inventory Provide maintenance and troubleshooting training to technicians and others as needed Identify safety hazards and take appropriate action to remove or eliminate hazards Qualification Requirements Familiarity with electrical systems and components Proficiency in using power tools for repair tasks Ability to read and interpret schematics accurately Proficiency with MS Office suite Ability to take direction and complete tasks with minimal oversight Valid Driver's License Working knowledge and experience operating under OSHA 1910, NFPA 70E, and 70B OSHA 10 General Industry certificate Must have the ability to travel, work on-call during off-shift hours and weekends Physical Requirements/Work Environment: Work is to be performed outdoors at various job sites. Must be able to comply with all safety standards and procedures. PPE personal protective equipment is required. Must have the ability to sit, stoop, kneel, bend, stand, or walk for 8-10 hours a day. Must be able to lift, push, or pull up to 50 pounds on an occasional basis Benefits: 401(k) with employer match Health Insurance Dental Insurance Vision Insurance Flexible Spending Account Health Savings Account Short-term and Long-term disability Critical illness Paid Time Off Parental Leave Paid Holidays Employee assistance program Life insurance Opportunities for advancement Training and Development Legal and Identity Theft Company vehicle or stipend opportunities Pet Insurance Act Power Services does not accept any unsolicited resumes or referrals from any third-party recruiting firms or agencies.

Come and join the City of Fresno in achieving our mission of Building a Better Fresno! Are you ready to be part of a dynamic team supporting essential communications systems in the heart of the City of Fresno? Join us as a Communications Technician and take your expertise to the next level! In this role, you'll play a key part in installing, maintaining, and repairing advanced radio and electronic communications equipment used throughout the city's vehicles, facilities, and operations. If you have experience with telecommunications, enjoy troubleshooting complex systems, and are ready to make an impact, this is your opportunity to contribute to a vital public service while advancing your career in a rewarding field! Duties may include, but are not limited to, the following: Install, repair, and maintain antennas, portable and mobile radio receivers, transmitters, base stations, microwave, and multiplex transmission systems used in City service. Install and maintain various types of electronic equipment, including scanning receivers, electronic sirens, radar systems, sound reinforcement systems, video display terminals, DVRs, cameras, CAD/AVL tracking systems, electronic passenger counters, and telephone equipment. Repair and replace digital displays, cameras, radios, and camera hard drives. Perform preventive maintenance on vehicle and bus electronics. Assist with radio frequency emission inspections in compliance with Federal Communications Commission (FCC) regulations and prepare required FCC reports. Maintain records, including timecards, work orders, schematics, and other related documents; enter data into and retrieve information from computerized work order management systems. Assist new operators in using radio and telecommunications equipment. Maintain and install electronic circuits, plan layouts, and install components and equipment; remove and repair equipment from retired or damaged vehicles. Performs other related duties as assigned. Duties and schedules may vary by assignment and/or department, please inquire about specific duties and/or schedules if called upon for an interview. Incumbents may be required to work any shift; nights, weekends, and holidays as needed. View We Work For You video to get an inside look at how rewarding it is to work for the City of Fresno: ************************************************ Current vacancies exist in the Department of Transportation (FAX). However, this classification also exists in the Information Services Department. Immediate and future vacancies will be filled from this eligible list for a period of three (3) months from the date the eligible list created, with the option of extending that period at the Citys discretion. Should the competitive process be suspended for this recruitment, the eligibility list may be limited to three (3) months. Pay,Benefits, & Work Schedule BENEFITS: UNIT 1 Classification - International Union of Operating Engineers, Stationary Engineers- IUOE (Local 39) HEALTH INSURANCE: The City contributes toward monthly premiums for PPO medical, dental and vision for employee and dependents. FLEXIBLE SPENDING ACCOUNT: IRS 125 Plan for health and dependent care expenses. DEFERRED COMPENSATION: Voluntary 457 plan with Fidelity Investments to increase your retirement savings. VACATION LEAVE: Accrue 8-15 hours per month. SICK LEAVE: Eight (8) hours per month, available after 90 days. SUPPLEMENTAL SICK- 40 hours per fiscal year. 80 hours lifetime maximum HOLIDAYS: Ten (10) City-observed annual holidays plus birthday and two (2) personal days. SHORT TERM DISABILITY: Provided through California SDI program. BILINGUAL PREMIUM: PAY: $100 per month HEALTH REIMBURSEMENT ARRANGEMENT: Eligible retirees can use remaining Sick Leave balance at 80% of hourly rate and other leave balances, if applicable, to reimburse medical insurance and qualified medical expenses, tax free. RETIREMENT: City of Fresno Retirement Systems, one of the best funded public systems in the state. Reciprocity with other public California systems. Vested in Retirement benefits after 5 years of service. City employees do not participate in Social Security. DROP (Deferred Retirement Option Program): an optional, voluntary program that allows an employee to deposit retirement benefits in a special savings account within the Retirement System while continuing to work for the City of Fresno for up to 10 years. Participation minimum is age 50 and vested. Benefits includes ownership of accumulated funds, compound interest earnings, and alternative distribution options. Additional information regarding the City of Fresno benefits is available at *************************************************************** The Requirements Applicants must meet the minimum qualifications on or before the posted filing deadline in order to qualify for the examination and do not assure placement on the eligible list. Education and Experience: Possession of a high school diploma or equivalent GED completion AND Two (2) years of experience equivalent in maintaining and repairing radio transmitting and receiving equipment, automotive electrical work, or similar work requiring technical aptitude, programming, and knowledge of electrical or network wiring and/or cabling. The work experience section MUST be completed with detailed duties, dates and weekly hours worked for each title held. Resumes will not be accepted in lieu of a completed employment application and will not be used to evaluate minimum requirements. Applications lacking a completed work experience section may be rejected. Additional Requirements SPECIAL REQUIREMENTS Possession of a valid California Class C Drivers License is required at the time of application and continued maintenance throughout the entire term of employment in this classification. Depending on assignment area, may be required to obtain and maintain for the entire term of employment, a California Class B Drivers License with passenger endorsement and without airbrake restriction within the probationary period, or within twelve (12) months after being assigned to an area requiring such license. Recruitment may be limited to a specific area of expertise as required by operational needs. The specific areas of expertise are listed below: 1. Telecommunications 2. Radio systems 3. Computer systems PHYSICAL DEMANDS The physical demands described here are representative of those that are necessary to safely, effectively, and efficiently perform the essential functions of this job with or without reasonable accommodation. This classifications physical demands involve medium work exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Additionally, the following physical demands may be required: balancing, climbing, crawling, crouching, feeling, manual dexterity, grasping, handling, hearing, kneeling, lifting, mental acuity, pulling, pushing, reaching, repetitive motion, speaking, standing, stooping, talking, visual acuity, walking. How To Apply APPLICANTS MUST COMPLETE AN ON-LINE APPLICATION. PLEASE VISIT WWW.FRESNO.GOV/JOBS TO APPLY. For information on how to complete an on-line application, please view "Instruction Guide" on the City's website, Personnel Services Career Opportunities page, or call ************** for assistance. Resumes will not be accepted in lieu of a completed employment application. ALL CORRESPONDENCE regarding this recruitment and exam process will be sent via e-mail. All applicants will acknowledge such understanding when they complete their on-line application. Verify we have your correct e-mail address before you submit your application. It is an applicant's responsibility to check their email frequently to ensure they receive all pertinent communication from the Personnel Services Department on a timely basis. Applicants will receive an automatically generated confirmation e-mail upon a successful application submittal. The e-mail is the only proof of submittal. It is an applicant's responsibility to check their email account and to ensure it is set up to accept emails from the City of Fresno. Dependent upon your settings, notices from the City of Fresno may be directed to the "junk mail" or "spam" folders. It is the applicant's responsibility to check these folders. Applications must be submitted by midnight on the filing deadline or they will not be accepted for any reason. FOR THIS RECRUITMENT, IT IS RECOMMENDED THAT PERMANENT FRESNO CITY EMPLOYEES APPLY THROUGH PEOPLESOFT SELF-SERVICE. Selection Process The selection process may consist of the following: WRITTEN EXAMINATION: 100%: A job related written examination will be administered which may test a candidates knowledge of proper use of tools/equipment used in telecommunications, communication and electronic theory and its application to municipal communications systems and general questions related to appropriate safety practices, work orders, rules and regulations; or other topics related to a candidates training, experience and qualifications for the position of Communication Technician I. Candidates must achieve a passing score to qualify for the eligible list. The Written Examination is tentatively scheduled for the week of December 8, 2025. Veteran Preference Regulations Candidates applying for veteran's preference are required to submit a copy of their DD214 with their application during the specified filing period. Evidence must be presented to indicate that the candidate was discharged honorably from the military service. Veterans, including City employees, must resubmit proof of honorable service for every examination for which veteran's preference credit is requested. Qualified veterans who pass the examination will have five (5) points added to their final score. Equal Opportunity Employer The City of Fresno is an Equal Opportunity Employer. Should you need a special accommodation due to a qualifying disability, please contact the Personnel Service Department at ************** in advance of the examination.

Dos Palos Oro Loma Jt. Unified PARAPROFESSIONAL GENERAL SUMMARY Under the supervision and general direction of certificated personnel assigned by the site administrator, assists instructional personnel with the development and presentation of learning materials and instructional exercises; tutors students individually or in small groups to reinforce and follow up on instructional activities; and performs other duties directly related to this job description. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. PRINCIPAL DUTIES AND RESPONSIBILITIES Monitors and assists students through practice and study activities following the presentation of learning concepts by instructional personnel. Reads to students, explains words and meanings, rephrases materials and provides appropriate learning examples. Assists in checking/validating student's work in progress and provides assistance/clarification for successful completion of assignments. Prepares materials for lessons. Reviews and corrects children's work. Assists students in the development of communication skills and serves as an appropriate language model. Helps instructional personnel in general behavioral shaping and reinforcement strategies as directed. Provides necessary assistance with routine classroom procedures and supervises students during recess and lunch periods. KNOWLEDGE, SKILLS AND ABILITIES REQUIRED Ability to see and read, with or without vision aids; ability to hear and understand speech at normal levels; ability to communicate so others will clearly understand normal conversation. Knowledge of correct English usage, grammar, spelling, punctuation and vocabulary. Skill in helping students develop understanding and ability in reading, math, and language comprehension. Ability to assist in the management and shaping of student behavior through positive reinforcement strategies. Skill in demonstrating an understanding, patient, warm and receptive attitude toward students. Ability to maintain a variety of records and reports, score tests and complete and record grades. Ability to maintain a neat, orderly and attractive learning environment. Skill and ability in working with diverse school population, and to establish and maintain positive working relationships with parents/guardians, community members and outside agency personnel. WORKING CONDITIONS Light to moderate physical effort, standing, sitting, and/or walking for extended periods of time. Lift and move instructional materials and equipment. Low to moderate stress level. ENVIRONMENTAL CONDITIONS Indoor classroom and school environment. Temperature - usually normal climate, occasional adverse weather conditions. CONTACTS Daily contact with students, teachers, school and District staff. Occasional contact with parents/guardians and community members and outside agency personnel. OCCUPATIONAL CERTIFICATES/LICENSES First Aid and CPR certification. Annual Blood borne Pathogen/Hep B Training. EMPLOYMENT STANDARDS Hold an Associate's or higher degree, or completion of two years of higher education study, or passed a formal state or local academic assessment that demonstrates knowledge of and the ability to assist in teaching reading, writing, and mathematics or reading, writing, and mathematics readiness. Dexterity and physical condition to maintain a moderate to rigorous work schedule and meet standards of physical and mental health. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the position. Note: Minimum qualifications may be waived on a case-by-case basis by the Superintendent or designee in his/her sole and absolute discretion. Board Approved: August 21, 2003 NCLB Compliance or Associate's or higher degree Internal Candidates need to submit a letter of intent with your application on Edjoin.org (no other documents required) External Candidates need to submit a full application packet on Edjoin.org with all required documents. Only applications with all required attachments completed will be considered. Refer to the job posting for a list of required skills or if you have any questions or need further clarification, please contact the email address listed in the posting. NCLB Compliance or Associate's or higher degree Internal Candidates need to submit a letter of intent with your application on Edjoin.org (no other documents required) External Candidates need to submit a full application packet on Edjoin.org with all required documents. Only applications with all required attachments completed will be considered. * CPR/First Aid Certification * Letter of Introduction * Letter(s) of Recommendation (3 recent letters; dated within the past 2 years) * NCLB Compliance * Other (Letter of Intent) * Proof of HS Graduation * Resume * TB Screening Result Comments and Other Information Dos Palos Oro Loma Joint Unified School District prohibits discrimination, harassment, intimidation and bullying in educational programs, activities, or employment on the basis of actual or perceived ancestry, age, color, disability, gender, gender identity, gender expression, nationality, citizenship or immigration status, race or ethnicity, religion, sex, sexual orientation, pregnancy actual or potential parental, family, or marital status, military status or association with a person or a group with one or more of these actual or perceived characteristics. Dos Palos Oro Loma Joint Unified School District requires that school personnel take immediate steps to intervene when safe to do so when he or she witnesses an act of discrimination, harassment, intimidation, or bullying. Questions or complaints of alleged discrimination, harassment, intimidation and bullying, equity or Title IX equity and compliance concerns should be directed to: David Childers Assistant Superintendent of Human Resources ************** 2041 Almond Street Dos Palos, CA 93620 ****************** If you need a reasonable accommodation to participate in the hiring process, Dos Palos-Oro Loma JUSD will provide you with one upon notice.

Classroom and Video Services Technician (Equipment/Systems Specialist - Foundation) Compensation and Benefits Anticipated Hiring Salary Range: $4,000 - $4,595 per month Full CSU Classification Salary Range: $3,680 - $6,145 per month This is a full-time (equivalent to 40 hours per week), probationary, non-exempt position. The CSU system provides a comprehensive benefit package that includes medical, dental and vision plans, membership in the California Public Employees Retirement System (CalPERS), sick and vacation time, and 15 paid holidays a year. Eligible employees are also able to participate in the fee waiver education program. A summary of benefit information can be found here. Job Summary Under the general direction of an appropriate administrator or the leadership of a senior level Information Technology (IT) Professional, the Equipment / Systems Specialist supports the mission of the department and the University by providing services and support in the Classroom and Video Services (CVS) team. Working with other technical staff to assure that our mission is administered and performed in a timely and professional manner to provide training and technical support to the faculty and staff of the campus community. The incumbent serves as a primary IT resource on all assigned topics and for multiple clients. Incumbents at this level work under the supervision of the manager to whom they report and possess the experience of being fully proficient in performing many of the work assignments defined for their position. The employee shall allocate priority and time to the duties mentioned below based upon direction from the manager to whom this employee reports. The manager will communicate these priorities and time allocation at least annually and when necessary. Key Qualifications Basic knowledge of Extron control systems, LCD projection systems, DVD players, audio/video CODEC's, cameras, microphones, audio and video mixers and/or switchers, computers, laptops, monitors, sound systems, multi-point control units (MCU's). Familiarity with materials, methods, and techniques used in the completion of equipment service assignments. Adept at using required tools, including computer systems, to accomplish tasks. Ability and manual dexterity to physically install and configure equipment, connections, and parts. Ability to: Provide technical support on various special projects, which may require some weekend work. Analyze equipment problems and determine what repairs are needed. Use a variety of test equipment and diagnostic software to ensure system operations. A history of regular attendance and positive performance evaluations. To view the full list of qualifications and job responsibilities, please click the Position Description button above. Education and Experience An Associate of Arts degree in electronics, telecommunications, or industrial technology or equivalent education, training, and/or directly related experience. Equivalent to one year of journey-level or skilled experience in the installation, maintenance, repair, and operation of electrical, electronic and digital media equipment. Preferred Skills: Experience with Extron control system design and configuration. Experience with IP based videoconferencing. Knowledge of: The methods, materials, and tools used in the repair, maintenance, and installation of multimedia and videoconference systems. Mac and PC computers and software. Wiring configuration systems. Interpreting schematics and diagrams. Department Summary Technology Services is dedicated to providing a broad range of technology-based planning, resources and services to the students, faculty and staff of California State University, Fresno. Deadline & Application Instructions Applications received by July 22, 2025 will be given full consideration by the search committee. Applications received after that date will be forwarded at the request of the Hiring Manager and/or search committee. Please click “Apply Now” to complete the employment application for California State University, Fresno. Interested applicants must complete the application and attach the following: 1) their most recent resumé/vitae, 2) a cover letter that addresses their specific qualifications and interest, and 3) contact information for three professional references. Fresno State California State University, Fresno is one of 23 campuses in the California State University System. The University's mission is to boldly educate and empower students for success through our values of Discovery, Diversity and Distinction. The current student population is more than 25,000, including a large percentage of students with diverse and culturally rich backgrounds. The University serves the San Joaquin Valley while maintaining deep involvement with the state, nation, and across the globe. Metropolitan Fresno, with a multi-ethnic population of over 527,000, is located in the heart of the San Joaquin Valley. The campus is within driving distance of Yosemite, Kings Canyon and Sequoia National Parks, San Francisco, Los Angeles, the Monterey Peninsula, beaches, sailing, lakes, and numerous ski resorts. Fresno boasts one of the most reasonable housing markets in California and offers a wide array of locally grown fruits and produce. Equal Employment Opportunity Information California State University, Fresno is committed to maintaining and implementing employment policies and procedures in compliance with applicable state and federal equal employment opportunity laws and regulations. Executive Orders 1096 and 1097 prohibit discrimination, harassment, and retaliation on the basis of a protected status: race, color, religion, national origin, ancestry, age, sex (including gender identity), sexual orientation, marital status, pregnancy, mental disability, physical disability, medical condition and covered veteran status. Fresno State's commitment to diversity informs our efforts in recruitment, hiring, and retention. We are proud to be an affirmative action and equal opportunity employer. COVID19 Vaccination Policy Per the CSU COVID-19 Vaccination Policy, it is strongly recommended that all employees who are accessing office and campus facilities follow COVID-19 vaccine recommendations adopted by the U.S. Centers for Disease Control and Prevention (CDC) and the California Department of Public Health (CDPH) applicable to their age, medical condition, and other relevant indications. Questions may be sent to ****************. Supplemental Information Following a conditional offer of employment, a background check (including a criminal records check) must be completed satisfactorily before any candidate may start work with California State University, Fresno. Failure to satisfactorily complete the background check may result in the withdrawal of the offer of employment. Current employees who are offered positions on campus will be required to undergo a background check for any position where a background check is required by law or that Fresno State has identified as sensitive. The person holding this position is considered a "mandated reporter" under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. This position may be a "designated position" under the California State University's Conflict of Interest Code. This will require the filing of a Statement of Economic Interest on an annual basis and the completion of training within six (6) months of assuming office and every two (2) years thereafter. Fresno State is a tobacco-free, smoke-free and vapor-free campus. Fresno State is not a sponsoring agency for staff or management positions. (e.g. H1-B Visas)