Field service technician jobs in Mount Pleasant, SC - 472 jobs

We are accepting applications for Travel Technicians to work at various locations across the United States. This job is 100% travel and will consist of installing low voltage wiring and equipment such as IP cameras, Wireless Access Points, Routers, Switches, etc. Qualified candidates should expect to be on the road anywhere from 2 - 8 months at a time. We are seeking a self-starter who can work well with a partner 6 days a week. The Travel Technician will be teamed up with a partner who will travel and work with them for the duration of the project. Responsibilities: * Pull and terminate low voltage cable. * Installing network equipment within commercial settings. * Follow instructions and code when pulling cable. * Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work. * Ensuring all cables are neatly tied and bundled according to safety regulations. * Installing of cable support structures such as j-hooks, cable racks, and inner duct. * Conduct tests to ensure all newly installed cable systems and component devices are operational. * Troubleshoot issues with the cable network. * Perform any other duties not specifically stated herein, but which your supervisor may assign. * Adhere to all required project safety requirements as set forth by the client, their customers, or OSHA. * Perform any other duties not specifically stated herein, but which your supervisor may assign. *Skills* low voltage, installation, wap, install, cctv, cable, cat5, cat6, Cabling, Cable installation, Cable puller, wireless access point, access control, punchdown, telecommunication, troubleshooting *Top Skills Details* low voltage,installation,wap,install,cctv,cable,cat5,cat6 *Additional Skills & Qualifications* Requirements: * Experience as a Data Cable Technician. * Available for extensive travel nationwide. * Ability to prioritize tasks. * Able to lift and carry 50 pounds or more multiple times per shift. * Ability to work in cramped spaces. * Hours of project 7 pm - 7 am 5 days a week. * Ability and willingness to travel to Lowell, AR for new hire orientation. * 100% travel of the USA * Ability to operate a scissor lift; and ability to work at heights. * Able to fill out the work order and take care of the tools provided by the office to do the job. * Abide by PPE requirements. Company provides hard hat, vest, and safety glasses. Must provide your own steel-toed boots. * Tools required by the technicians: hand tools, screwdrivers (both standard and Phillips), snips, punch down (impact), toner and probe, pliers, adjustable wrenches, joint pliers, and lineman pliers. * Valid driver's license with a clean driving record; no DUI or DWI in the last three years. Benefits: * Per-Diem paid $125 a day for food and lodging. * Company vehicle provided (traveling with a partner) *Experience Level* Intermediate Level *Job Type & Location*This is a Contract position based out of Charleston, SC. *Pay and Benefits*The pay range for this position is $19.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) *Workplace Type*This is a fully onsite position in Charleston,SC. *Application Deadline*This position is anticipated to close on Jan 20, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military

The Field Service Specialist at Vantive is responsible for installation, repair, preventive maintenance, and training on electro-mechanical medical devices in clinical settings. This role demands strong technical troubleshooting skills, customer interaction, territory management, and adherence to safety and quality standards. The position requires frequent travel, autonomous work, and effective communication to ensure equipment performance and customer satisfaction in the healthcare industry. Vantive is a vital organ therapy company on a mission to extend lives and expand possibilities for patients and care teams everywhere. For 70 years, our team has driven meaningful innovations in kidney care. As we build on our legacy, we are deepening our commitment to elevating the dialysis experience through digital solutions and advanced services, while looking beyond kidney care and investing in transforming vital organ therapies. Greater flexibility and efficiency in therapy administration for care teams, and longer, fuller lives for patients- that is what Vantive aspires to deliver. We believe Vantive will not only build our leadership in the kidney care space, it will also offer meaningful work to those who join us. At Vantive, you will become part of a community of people who are focused, courageous and don't settle for the mediocre. Each of us is driven to help improve patients' lives worldwide. Join us in advancing our mission to extend lives and expand possibilities. The Field Service Technician is a key customer facing position that represents the Vantive brand in clinical and hospital settings. This position manages an assigned territory and travels to perform installation, repair, preventative maintenance, training, and other services on a variety of electro-mechanical medical devices. Field Technicians are hands-on and enjoy solving advanced technical problems, interacting with customers, applying attention to detail, working autonomously, variation in their work, and traveling. This position focuses on providing a positive customer experience, strong communication, and ensuring all services needs are met in a quality and timely manner. Essential Roles and Responsibilities • Perform installation, calibration, preventive maintenance, and repairs on a wide range of electro-mechanical medical equipment, ensuring compliance with SLAs, quality standards, and safety protocols. • Diagnose and resolve equipment failures, identifying root causes and implementing corrective actions using analytical and technical skills. • Manage service territory by scheduling service calls, preventive maintenance, and travel efficiently to meet SLA commitments. • Maintain accurate documentation of service activities, maintenance records, and inventory transactions; ensure test equipment is calibrated and functioning properly. • Plan and order necessary parts for service and maintenance, maintaining proper inventory control. • Provide training and guidance to customer personnel on equipment operation, maintenance procedures, and inspection techniques. • Communicate effectively with customers regarding service status, arrival times, and issue resolution to maintain strong relationships and customer satisfaction. • Represent the company professionally through positive attitude, appearance, and engagement with customers and colleagues. • Mentor and support other service technicians; contribute to departmental meetings, training events, and knowledge sharing through troubleshooting guides and best practices. • Contribute to team and organizational success by mentoring peers, sharing best practices, recommending service improvements, and keeping leadership informed of operational needs and challenges. • Participate in installation projects, field actions, and assigned initiatives; may lead projects as needed. • Ensure proper handling of delicate components and adherence to hospital regulations and environmental, health, and safety policies. • Manage travel to clinical and stakeholder sites for technical support, training, and meetings. • Demonstrate interpersonal skills that embrace Vantive's cultural values of Care, Own it, Trust and Innovate. • Perform other duties as assigned. Required Qualifications • Experienced in biomedical engineering, including installation, maintenance, and repair of medical devices, with the ability to diagnose issues, perform mechanical adjustments, and apply independent judgment to resolve complex equipment problems in compliance with safety and regulatory standards. • Demonstrated ability to work independently to effectively manage assigned territory. • Strong interpersonal skills with the ability to maintain a high level professional and courteous conduct with peers, internal and external customers. • Excellent verbal and written communication skills required. • Proficiency in Microsoft Office tools (Outlook, Word, Excel, Visio, Project, PowerPoint). • Able to work in healthcare environments while adhering to PPE protocols (e.g., gowning, mask), and meet the physical demands of the role including standing, kneeling, bending, and regularly lifting up to 50 lbs, with occasional heavier lifting using appropriate aids. • Ability to travel 50-75%, including overnight stays; willingness to drive long distances or fly as required. • Valid driver's license required. • Demonstrates alignment with Vantive's cultural values: Care, Own it, Trust, and Innovate. Experience and Education • Associate's degree or higher in Biomedical Engineering, Electrical/Electronic Engineering, Computer Science, or a related technical field • OR associate's degree or higher in non-related field with 3+ years of electro-mechanical troubleshooting experience. • OR Biomedical Engineering Technology (BMET) certification with 3+ years of electro-mechanical troubleshooting experience. • OR completion of a U.S. military electrical or electrical biomedical equipment technology program. • Previous field service experienced is strongly preferred. We understand compensation is an important factor as you consider the next step in your career. At Vantive, we are committed to equitable pay for all employees, and we strive to be more transparent with our pay practices. The estimated base salary for this position is $60,000 - $75,000 annually. The estimated range is meant to reflect an anticipated salary range for the position. We may pay more or less than the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on upon location, skills and expertise, experience, and other relevant factors. For questions about this, our pay philosophy, and available benefits, please speak to the recruiter if you decide to apply and are selected for an interview. US Benefits at Vantive This is where your well-being matters. Vantive offers comprehensive compensation and benefits packages for eligible roles. Our health and well-being benefits include medical, dental and vision coverage that start on day one, as well as insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance. Financial and retirement benefits include the Aon Pooled Employer Plan (“Aon PEP”), Vantive's 401(k) retirement savings plan, to help you prepare for your future. The Aon PEP is designed to help improve retirement outcomes by providing retirement resources more efficiently. The plan offers a robust set of investment options, financial education, and a suite of resources to support your retirement goals. We also offer Flexible Spending Accounts, educational assistance programs, and time-off benefits such as paid holidays, paid time off ranging from 20 to 35 days based on length of service, family and medical leaves of absence, and paid parental leave. Additional benefits include commuting benefits, the Employee Discount Program, the Employee Assistance Program (EAP), and childcare benefits. Join us and enjoy the competitive compensation and benefits we offer to our employees. For additional information regarding Vantive's US Benefits, please speak with your recruiter or visit our Benefits site: Benefits | Vantive Equal Employment Opportunity Vantive is an equal opportunity employer. Vantive evaluates qualified applicants without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity or expression, protected veteran status, disability/handicap status or any other legally protected characteristic. Know Your Rights: Workplace Discrimination is Illegal Reasonable Accommodation Vantive is committed to working with and providing reasonable accommodations to individuals with disabilities globally. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application or interview process, please click on the link here and let us know the nature of your request along with your contact information. Form Link Recruitment Fraud Notice Vantive has discovered incidents of employment scams, where fraudulent parties pose as Vantive employees, recruiters, or other agents, and engage with online job seekers in an attempt to steal personal and/or financial information. To learn how you can protect yourself, review our Recruitment Fraud Notice. Keywords: field service specialist, medical device maintenance, biomedical engineering, electro-mechanical troubleshooting, healthcare equipment repair, preventive maintenance, clinical service technician, customer training, territory management, technical support

The Lead Technician will be responsible for installation, termination and configuration, without direct supervision, of access control devices, such as: card readers, request to exits, electrified door hardware, access control panels, analog and IP cameras, camera servers (NVR), power supplies, cable pathway systems and various cable that includes but is not limited to: twisted pair cable, low voltage cable and coax. They will be directly responsible for onsite tasking of Field Technicians and Installers to meet the project milestones set by the Project Managers and Field Supervisors. Installations are performed in both new construction and retrofit scenarios in a variety of environments. Essential Functions• Onsite tasking of resources to meet project milestones established by the Project Manager• Install various access control devices and electrified door hardware• Install and connect access control panels, power supplies and control equipment• Install and program various CCTV; analog and IP cameras• Install and program various types of NVR's and VMS platforms• Install cable and pathway systems to support security systems• Work in a team environment under project manager, leading a group of field technicians• Maintain installation deadlines• Be accountable for the daily time entries of all crew members• Maintain a high level of quality control• Ensure safety on the job site• Perform end-user training • Participate in project commissioning and testing• Assist in the enforcement of standards related to final documentation• Attend trades meetings at construction sites as needed Minimum Qualifications• Hold and retain certification in at least two VMS systems• Hold and retain certification in at least two access control system• Have a minimum one year of experience of basic configuration of physical security systems• Have attended training for at least one camera manufacturer and received certificate• Hold and retain the OSHA-10 certificate• Have served as a Field Technician (or equal) for a minimum of two years• Must pass pre-employment background check and drug test Knowledge, Skills and Abilities • Ability to effectively lead and plan work days an installation crew of two to four workers• Demonstrated proficiency in low voltage principles (ohm's law, load calculations, metering, etc.)• Ability to effectively communicate with customer IT and Facilities staff• Ability to effectively coordinate with other trades• Demonstrated proficiency in the installation, termination and configuration of IP camera technology, controller hardware, power supplies, door hardware and credential technologies• Competency in the principles and concepts of physical security systems and demonstrate the ability to apply knowledge in the field

Atlantic Housing Foundation (AHF), Inc. is a 501(c)3 not-for-profit affordable housing provider. Founded in 1999, we currently own and operate over 10,000 units of multifamily properties in 6 states and 37 cities. In addition to HUD HAP and LIHTC properties, Atlantic Housing owns and operates affordable housing, mixed-income multifamily assets, student housing and senior housing. The mission of Atlantic Housing Foundation, Inc. is to promote and preserve quality affordable housing and related services for low and moderate income families, helping residents improve their lives. We will do this in a manner that will foster the continuous improvement of our people and our company. We strive to be a top performing, thoroughly professional and genuinely caring organization in all that we do. As an organization, we aspire to and believe in - Making a difference. Why Should You Apply? You believe in the AHF mission and core values You are the best at what you do You meet the qualifications below Benefits Offered: Paid every two weeks Educational Reimbursement Opportunities for upward mobility 12 Paid Company Holidays 16 hours of Learning Time Off annually 32 hours of Volunteer Time Off annually Competitive Paid Time Off accrual This role is eligible for overtime Rent discount if living on-site Multiple health care insurance plans that cover medical, dental, prescription, vision, employer HSA contributions, and supplemental health insurance Competitive 401(k) Program with employer matching contributions Job Description About the Lead Service Technician Role: The Lead Service Technician is responsible for ensuring that the physical aspects of the community meet the company's established standards for safety, appearance and operation within the budgeted financial goals. He or she will inspect grounds, building and other community features daily to identify, minimize and correct hazardous property conditions or liability concerns. Oversee the physical property, general maintenance repairs, unit make-ready, preventative maintenance, and construction or rehabilitation projects for the apartment community to ensure quality and expediency. Maintain well-organized and property stocked maintenance shop while adhering to safety standards. Under direction of Community Manager, the Lead Service Technician will supervise, train and schedule maintenance activities for maintenance staff. Check work progress of each maintenance staff on daily basis; provide immediate assistance and instruction if needed. Will be required to schedule and respond to on-call/after hour emergencies. Additionally, he or she is responsible for adhering to federal, state and local laws pertaining to Fair Housing and OSHA regulations. Qualifications Education and Experience: High school diploma or equivalent (required) 2+ years of supervisory experience (required) 3+ years of multi-family maintenance experience or at least 3+ years of commercial maintenance experience (required) EPA Sec 608 Certification - either a Type I (small appliances) plus Type II (AC's), or Type Universal (required) Meeting maintenance financial standards by providing annual budget information; monitoring expenditures; identifying variances; implementing corrective actions. Under direction of the Community Manager, accomplishing maintenance human resource objectives by training, assigning, scheduling, coaching, and counseling employees; communicating job expectations; planning, monitoring, and adhering to policies and procedures. Participating in improving maintenance operational standards by contributing maintenance information to strategic plans; implementing production, productivity, quality, and customer-service standards; resolving problems. Familiar with plumbing repairs, tile work, HVAC equipment, appliances, carpentry repairs, electrical repairs and all facets of an apartment make ready. Must have reliable transportation, a valid driver's license and be able to read, write and speak English. Ability to stand and/or sit for long periods of time, as well as move through the community and maneuver around equipment, climb ladders for repairs, etc. Must be willing to be on-call Must be able to climb up and down a ladder. Excellent communication skills. Collaborative team player. Ability to lift and carry objects weighing 50 pounds or more. Ability to work occasionally in poor weather conditions, including heat, cold, rain, or snow. Additional Information All your information will be kept confidential according to EEO guidelines. #indst

Luxury Pool Service Technician - Pool Equipment & Water Systems 🌊 Make a Splash in Your Career with Us! 🌊 Aqua Blue Pools is looking for talented and motivated individuals to join our Service RepairTeam! This is a full-time, year-round position (NOT seasonal) with great pay, benefits, and the opportunity to work with a team that values integrity, customer service, and having a great time while getting the job done right! If you're a hands-on problem solver who enjoys working outdoors, tackling challenges, and ensuring happy customers, we'd love to meet you! 💲 Why You'll Love This Job Earn $22-$25 per hour (based on experience) Company truck provided during work hours 🚛 Paid training - We'll teach you the skills you need to succeed! Opportunities for growth within our company. When you do well, we do well. Great employees are recognized and can grow with us! Work in the great outdoors - no office cubicles here! Be part of a team that supports each other and takes pride in their work 🔧 What You'll Be Doing - Your Day in the Life of a Service Repair Technician This isn't just another job-it's a hands-on career where you'll diagnose, repair, and ensure customer satisfaction while working with a top-notch team. Your day-to-day responsibilities will include: 🔍 Diagnosing & Repairing Pool Equipment Troubleshoot, repair, and install pool equipment such as filters, pumps, heaters, timers, and High End Pool Automation systems 🛠️ Perform routine maintenance and inspections to prevent breakdowns Handle warranty service and repairs, following company procedures 📞 Customer Service & Communication Be the face of Aqua Blue Pools! Provide professional and courteous service to customers, ensuring their questions are answered Communicate with customers before and after service visits to set expectations and explain the work performed Identify and recommend additional services as needed to keep pools running at their best Ensure every customer is left happy and confident in their pool's condition 📋 Documentation & Reporting Keep detailed records of all work performed, including repairs, parts used, and follow-up needs Take before-and-after photos of equipment and site conditions for documentation (and customer peace of mind) 📸 Update work orders daily, ensuring jobs are marked completed, rescheduled, or requiring follow-up 🚚 Inventory & Equipment Management Perform daily truck inventory checks to ensure you have the right tools and parts before heading out Remove and document warranty items and ensure proper inventory tracking Sign out and return parts/tools used on each job to maintain accurate invoicing and stock levels 🛠️ Problem Solving & Escalation If a job requires additional expertise, escalate it to the Service Coordinator or Service Manager Work efficiently while ensuring quality craftsmanship-we want it done right the first time! Participate in training sessions to stay up to date on new equipment and industry best practices 🚦 Teamwork & Daily Operations Attend morning meetings to review job assignments and discuss key updates Maintain open communication with the Service Coordinator and warehouse team throughout the day Follow the Service Customer Journey SOP to provide a consistent, high-quality experience 🎯 What We're Looking For 23 years of age, South Carolina Driver's License with a clean driving record 🚗 High School Diploma or GED Ability to lift heavy equipment, bend, and stand for long periods (you'll be getting a workout!) A great attitude and a willingness to learn-HVAC knowledge is a plus, but not required! 💙 Why Aqua Blue? At Aqua Blue Pools, we do more than just build and maintain pools-we create exceptional experiences for our customers and team members. Our Values are what sets us apart: ✅ Optimism & Resilience: We tackle challenges with a positive mindset and never settle for anything less than the best. ✅ Integrity & Trust: We do what we say we'll do-no shortcuts, no excuses. ✅ Exceeding Expectations: Our goal isn't just customer satisfaction-it's customer delight! ✅ Ownership & Initiative: We empower our team to take charge, make decisions, and take pride in their work. ✅ Diverse Perspectives: We welcome new ideas and perspectives-your voice matters here! When you join Aqua Blue Pools, you're not just another employee-you're family. We take care of our people, and we have a great time doing it! 🎁 Perks & Benefits Health, dental, and vision insurance after 90 days 🏥 401K retirement plan 💰 Paid vacation and holidays 🏖️ Maternity & Paternity Leave 👶 Career development & training opportunities 🚀 Ready to Dive In? If you're ready to join a dynamic team, learn new skills, and grow in a hands-on, rewarding career, apply today! 📍 Aqua Blue Pools is a local, family-owned company serving the Lowcountry since 1991. Based in Hollywood, SC, we proudly serve customers on the coast of SC. Apply now and start your journey with Aqua Blue Pools! 🌊🎉

The Senior Service Technician reports to the Service Manager, and is responsible for performing a wide range of HVACR servicing jobs for industrial, commercial, and residential customers. Benefits Paid Training Careers Advancement Opportunities Flexible Scheduling Competitive Compensation Year-Round Work Spiffs, Rewards, & Employee Contests Cell phone Truck and gas card Medical and 401K Hourly plus commissions Customer-based activities involved in this position require an individual who is decisive, tactful, dependable, and who possesses initiative and the ability to communicate well with all customer groups. A Senior Service Technician must be able to accurately diagnose and efficiently accomplish a job to the mutual benefit of the customer and Berkeley Heating & Air Conditioning. Job-related contact can occur with virtually all demographic groups, with the majority of the contacts being with service customers, other Berkeley technicians, the Service Manager, Dispatcher and the Parts Runners. Representative duties include: Assisting the Service Manager in the planning, organization, motivation, control and coordination of human and other resources in support of the departmental jobs, assignments, and sales. Leading by example an ad hoc service team in the timely, efficient, and profitable accomplishment of an assigned job or task. Performing special and complex service jobs without assistance, including performing periodic on-call duties, as required. Training Service Department and other Berkeley employees on service-related subjects, including call-back prevention, servicing tips, and equipment protocols. Conducting quality control inspections of Berkeley service jobs, monitoring the technical progress of newly assigned service employees, including start-up oversight. Conducting point-of-work sales of Indoor Air Quality services, unit components, unit replacements, add-on units, and residential service contracts. Developing lead referrals for Berkeley sales staff. Conducting non-service, lead-tech level work in support of the Indoor Air Quality and Installation Departments, as assigned. Assisting the Service Manager with administration, dispatching, and on-site evaluation work. Performing related duties as directed by the Service Manager. Job Qualifications: High school graduate and graduate of a post-secondary HVACR program of instruction of two or more years in duration. Five or more years of successful and full-time HVACR experience, either as a commercial service or commercial installation technician. Good oral and reading skills, including the ability to read and apply manufacturers' instructions and to clearly communicate with residential, commercial and industrial customers, suppliers, and all Berkeley employees. Physical ability to perform all duties noted above under the conditions, circumstances and extreme weather found in (state). Interest and initiative in maintaining and advancing his/her HVACR skills through a combination of self-study, company training, manufacturers' workshops, and other professional development activities. Current operator's license and the ability to operate all vehicles in the corporate fleet within 30 days of initial employment. Incumbent must be insurable by current Berkeley insurance carrier Interest, initiative and ability to be trained in low-key point-of-service sales techniques, including developing sales leads, sales of unit replacements, add-on units, IAQ services, and service contracts. Ability to work under pressure of time, non-standard schedule, supervision considerations, weather, customer needs, and backlog constraints. There are many exciting options for a career in HVACR waiting to be explored. If you're looking for a career that offers flexibility, job stability, strong pay, benefits and more, then you've come to the right place!

Field Services Technician- II Job Description (Lead) The Field Service Technician plays a pivotal role in enabling a seamless user experience. Responsibilities encompass a wide range of tasks, from meticulously tracking orders to efficiently managing hardware and accessory deployment. Field Service Technicians are the backbone of front-line user support, ensuring that conference rooms are well-maintained and behind-the-scenes user setups are flawlessly executed. Beyond their technical duties, Field Service Technicians focus on fostering strong relationships with users, understanding their needs, and ensuring their satisfaction. They will support Astreya's ever-expanding customer base and ensure a consistently high-quality user support experience. The successful candidate will be familiar with industry best practices and willing to go above and beyond for our clients. Scope: Provide end-to-end onsite and remote user support, ensuring high-quality solutions and user experiences. Oversee service delivery across a set of client sites, buildings, or specific customer areas (SCAs), monitoring key performance indicators (KPIs) like Service Level Agreements (SLAs) and quality metrics. Diagnose hardware issues, support AV equipment, and collaborate across teams to ensure smooth operations and customer satisfaction. At single-person sites, where there is not a team of technicians and the Field Services Technician is the sole resource, the technician is automatically designated as an L1 Field Services Technician- II . Primary Responsibilities: User Support: Provide end-to-end onsite and remote user support for service requests. Utilize logic and reasoning to identify alternative solutions, conclusions, or approaches to problems, delivering the best possible solutions for a high-quality user experience. Act as a primary point of contact for clients, ensuring timely and accurate resolution of their issues. Inventory: Deploy and recover assets and accessories. Assist in workstation dressing. Hardware Support & Management: Diagnose and resolve hardware issues. Support product lifecycle management activities. Room & Audio Equipment Support: Support a complex and fast-paced environment focused on video conference rooms, ensuring audio and visual quality and troubleshooting any issues or requests. Participate in installing AV equipment and displays. Ticket Management: Ensure assigned support request tickets are prioritized and completed in a timely manner. Handle tasks related to order tracking, hardware deployment, and user setup, typically tracked through ticketing systems. Utilize the defined ITSM System to properly manage work related to service activities. Issues Escalation: Effectively document and escalate issues that cannot be resolved within the Service Level Agreements (SLAs). Proactively communicate with your supervisor when encountering errors in documented support procedures. Adhere to incident management, problem management, change management, and knowledge management best practices. Service Delivery Oversight & Performance Monitoring: Oversee service delivery across designated client sites/buildings/SCAs. Monitor key performance indicators (KPIs) including SLAs for services under local service management (LSM) and quality measurement metrics. Team Leadership & Development: Assign tasks and set goals for team members. Monitor technician performance and provide constructive feedback. Provide technical expertise and guidance to team members. Coach and mentor team members to improve their skills and overall performance. Collaboration: Participate in cross-team/site collaboration to share service knowledge, isolate potential problems, and ensure the consistent delivery of defined service activities. Collaborate within the broader IT customer experience team and extended IT organization to ensure the highest level of customer support. Customer Experience: Ensure a positive user experience and customer satisfaction through smooth operations and effective work management. Enable the success of your peers and teammates. Other duties as assigned. Required Qualifications/Skills: High school diploma or general education degree (GED) and 1 to 2 years of related experience and/or training in IT Services; or an equivalent combination of education and experience. Strong knowledge of policies and procedures related to requested support activities. Capable of understanding customer needs and providing a high level of interaction, ensuring customer satisfaction. Proactive in mastering all aspects of service delivery processes, communication, and the quality of your work. Facilitate and promote a team culture that encourages ownership of team goals, trust, respect, and strong cross-collaboration throughout the service program. Provide general IT support within a high-volume and fast-paced technology environment. Possess the ability to assist with a variety of basic technical issues, including but not limited to applications, hardware, and mobile technologies. Strong working knowledge of Microsoft Windows 11, Mac OS X, Linux Fundamentals, Hardware Level troubleshooting, Hardware Installation, and Upgrades. Knowledge of basic functionality and use of various mobile devices (iOS, Android, etc.). Knowledge of hardware (desktop/laptop) deployment methods using image deployment tools. Ability to quickly diagnose, organize, and prioritize competing deadlines and properly set service expectations with clients. Time Management: Must possess strong time management skills to prioritize tasks effectively, meet deadlines, and deliver exceptional customer support. Ability to manage multiple priorities and meet deadlines. Preferred Qualifications: Active listening and detail-oriented to perform and document your work effectively. Enjoy working with collaborative individuals and understand you are in a customer-facing support role. Strive to deliver a high-quality user support experience. Excellent written and verbal communication skills are second to none. Self-motivated and the ability to execute tasks and handle time-sensitive situations. Commitment to excellence. Other Requirements: This role requires weights of 50lbs/22kg to be regularly lifted. Strong communication skills, written and verbal English required. This is an office-based role; it requires the successful candidate to be on site during working hours. Health & Safety Requirements: Must conduct work activities in accordance with all applicable Environmental, Health & Safety regulations and rules. Additionally, will follow all Astreya's Health & Safety Program, Code of Conduct, and client Health & Safety rules at all times. Salary Range $19.22 - $30.35 USD (Hourly) Please note that the salary information provided herein is base pay only (gross); it does not include other forms of compensation which may or may not apply to this specific position, namely, performance-based bonuses, benefits-related payments, or other general incentives - none of which are guaranteed, may be subject to specific eligibility requirements, and are wholly within the discretion of Astreya to remit. Further, the salary information noted above is a range that consists of a minimum and maximum rate of pay for this specific position. Where an applicant or employee is placed on this range will depend and be contingent on objective, documented work-related considerations like education, experience, certifications, licenses, preferred qualifications, among other factors. Astreya offers comprehensive benefits to all Regular, Full-Time Employees, including: Medical provided through UHC (PPO, HSA, Surest options) / Medical provided through Kaiser (HMO option only) for California employees only Dental provided through UHC Nationwide Vision provided by UHC Flexible Spending Account for Health & Dependent Care Pre-Tax Account for Commuter Benefit/Parking & Transit (location-specific) Continuing Education and Professional Development via various integrated platforms, e.g. Udemy and Coursera Corporate Wellness Program provided by Goomi Group Employee Assistance Program Wellness Days 401k Plan Basic and Supplemental Life Insurance Short Term & Long Term Disability Critical Illness, Critical Hospital, and Voluntary Accident Insurance Tuition Reimbursement (available 6 months after start date, capped) Paid Time Off (accrued and prorated, maximum of 120 hours annually) Paid Holidays Any other statutory leaves, paid time, or other ancillary benefits required under state and federal law

Job Title: Fiber Splicing Technician Department: Construction Reports To: Construction Manager We will determine salary based on skills and experience in relation to the function of the role, as well as equity to any other employees in the same or similar role. Job Summary: The Fiber Splicing Technician splices, tests, troubleshoots, and repairs fiber optic cables. Job Responsibilities (Including, but not limited to): · End-of-Line Network Testing: Testing light levels at the end of fiber networks for balanced signal between points is crucial to ensure proper signal transmission and network performance. · Cable Prep: Ensure that cables are properly labeled and organized to minimize errors during installation. · Build Fiber Cases and Enclosures: Constructing fiber cases and enclosures involves creating protective housings for fiber optic equipment and connections. · Splice Color for Color Fibers: When splicing fiber optic cables together, technicians match the colors of the fibers to ensure that the correct fibers are connected. · Cable Management: Organize the cables neatly within the enclosure, ensuring that they are properly routed and secured to prevent tangling or damage. · Sealing and Placement of Case: Ensuring that the enclosure is properly closed and secured to protect the equipment and cables inside from environmental elements. · Read Prints and Maps: Examine Splice Matrix and redline maps to understand fiber routes and assignments. · Splice off color and multiple cables in one enclosure. · Jumping Trays: Routing fibers from one tray to another, possibly to optimize cable management, minimize signal loss, or create efficient pathways within the enclosure. · Splice Tie Point and Jumper Cases: Splicing fibers at a tie point involves connecting fibers from different cables. · Connect Jumper cables between jumper cases. · Rehab gel-filles cases: The process of refurbishing or rehabilitating gel-filled enclosures used in fiber optic networks. · Redlining and Documentation: Marking up or annotating existing drawings or documents with changes, updates, or corrections. · Case swaps and audits: Replacing one equipment case or enclosure with another. · Troubleshooting: Identifying, diagnosing, and resolving issues that can affect the performance and reliability of the network. · May pull cable through existing duct package, pull cable through conduit either manually, blowing, or mechanically, and splice and activate underground and aerial lines. · Other duties as assigned. Required Skills & Qualifications: General · Ability to do physical labor, climb ladders and poles, work in confined spaces, etc. · Ability to read blueprints for job specifications in placement of cables, location of utilities, etc. · Must be able to distinguish between different colors for connection of fibers. · Must be a self-starter and internally motivated to achieve corporate, department, and personal objectives. · Must have excellent interpersonal communication skills (oral and written) and be a team player. · Must possess excellent problem solving and decision-making skills. · Ability to use basic math skills to compute measurements, figure ohms, timecards, etc. · Ability to listen and to follow directions. · Must be organized, multi-tasked oriented, and maintain a neat and safe work environment. · Ability to work in high places on ladders and poles. · Ability to work in confined spaces. · Ability to distinguish different fiber connections. Physical Demands and Work Environment · Must be able and willing to work outdoors, subject to inclement weather conditions · Must be able to maintain visual and audible contact with other crewman and all moving or stationary persons/vehicles/objects to ensure safe coordination of movement · Must be able to work around heavy equipment and machinery · Must be able to stand or walk for long periods of time · Must be able to lift and carry up to 50 pounds · Routinely requires extended periods of bending, squatting, climbing, kneeling, pushing, pulling, lifting, lifting in awkward positions, standing, and twisting · Must be able to stand, walk, sit or be in other physically demanding positions for long periods of time · Must be able to work while wearing safety boots, safety glasses, hardhat, and any applicable safety gear Required Licenses/Certificates/Registrations: · OSHA 10 All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor. Requirements are representative of minimum levels of knowledge, skills, and/or abilities. To perform this job successfully, the incumbent will possess the abilities or aptitudes to perform each duty proficiently. This document does not create an employment contract, implied or otherwise, other than an “at-will” employment relationship.

Job Title: Fiber Splicing Technician Department: Construction Reports To: Construction Manager We will determine salary based on skills and experience in relation to the function of the role, as well as equity to any other employees in the same or similar role. Job Summary: The Fiber Splicing Technician splices, tests, troubleshoots, and repairs fiber optic cables. Job Responsibilities (Including, but not limited to): * End-of-Line Network Testing: Testing light levels at the end of fiber networks for balanced signal between points is crucial to ensure proper signal transmission and network performance. * Cable Prep: Ensure that cables are properly labeled and organized to minimize errors during installation. * Build Fiber Cases and Enclosures: Constructing fiber cases and enclosures involves creating protective housings for fiber optic equipment and connections. * Splice Color for Color Fibers: When splicing fiber optic cables together, technicians match the colors of the fibers to ensure that the correct fibers are connected. * Cable Management: Organize the cables neatly within the enclosure, ensuring that they are properly routed and secured to prevent tangling or damage. * Sealing and Placement of Case: Ensuring that the enclosure is properly closed and secured to protect the equipment and cables inside from environmental elements. * Read Prints and Maps: Examine Splice Matrix and redline maps to understand fiber routes and assignments. * Splice off color and multiple cables in one enclosure. * Jumping Trays: Routing fibers from one tray to another, possibly to optimize cable management, minimize signal loss, or create efficient pathways within the enclosure. * Splice Tie Point and Jumper Cases: Splicing fibers at a tie point involves connecting fibers from different cables. * Connect Jumper cables between jumper cases. * Rehab gel-filles cases: The process of refurbishing or rehabilitating gel-filled enclosures used in fiber optic networks. * Redlining and Documentation: Marking up or annotating existing drawings or documents with changes, updates, or corrections. * Case swaps and audits: Replacing one equipment case or enclosure with another. * Troubleshooting: Identifying, diagnosing, and resolving issues that can affect the performance and reliability of the network. * May pull cable through existing duct package, pull cable through conduit either manually, blowing, or mechanically, and splice and activate underground and aerial lines. * Other duties as assigned. Required Skills & Qualifications: General * Ability to do physical labor, climb ladders and poles, work in confined spaces, etc. * Ability to read blueprints for job specifications in placement of cables, location of utilities, etc. * Must be able to distinguish between different colors for connection of fibers. * Must be a self-starter and internally motivated to achieve corporate, department, and personal objectives. * Must have excellent interpersonal communication skills (oral and written) and be a team player. * Must possess excellent problem solving and decision-making skills. * Ability to use basic math skills to compute measurements, figure ohms, timecards, etc. * Ability to listen and to follow directions. * Must be organized, multi-tasked oriented, and maintain a neat and safe work environment. * Ability to work in high places on ladders and poles. * Ability to work in confined spaces. * Ability to distinguish different fiber connections. Physical Demands and Work Environment * Must be able and willing to work outdoors, subject to inclement weather conditions * Must be able to maintain visual and audible contact with other crewman and all moving or stationary persons/vehicles/objects to ensure safe coordination of movement * Must be able to work around heavy equipment and machinery * Must be able to stand or walk for long periods of time * Must be able to lift and carry up to 50 pounds * Routinely requires extended periods of bending, squatting, climbing, kneeling, pushing, pulling, lifting, lifting in awkward positions, standing, and twisting * Must be able to stand, walk, sit or be in other physically demanding positions for long periods of time * Must be able to work while wearing safety boots, safety glasses, hardhat, and any applicable safety gear Required Licenses/Certificates/Registrations: * OSHA 10 All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor. Requirements are representative of minimum levels of knowledge, skills, and/or abilities. To perform this job successfully, the incumbent will possess the abilities or aptitudes to perform each duty proficiently. This document does not create an employment contract, implied or otherwise, other than an "at-will" employment relationship.

Job Title: Fiber Splicing Technician Department: Construction Reports To: Construction Manager We will determine salary based on skills and experience in relation to the function of the role, as well as equity to any other employees in the same or similar role. Job Summary: The Fiber Splicing Technician splices, tests, troubleshoots, and repairs fiber optic cables. Job Responsibilities (Including, but not limited to): · End-of-Line Network Testing: Testing light levels at the end of fiber networks for balanced signal between points is crucial to ensure proper signal transmission and network performance. · Cable Prep: Ensure that cables are properly labeled and organized to minimize errors during installation. · Build Fiber Cases and Enclosures: Constructing fiber cases and enclosures involves creating protective housings for fiber optic equipment and connections. · Splice Color for Color Fibers: When splicing fiber optic cables together, technicians match the colors of the fibers to ensure that the correct fibers are connected. · Cable Management: Organize the cables neatly within the enclosure, ensuring that they are properly routed and secured to prevent tangling or damage. · Sealing and Placement of Case: Ensuring that the enclosure is properly closed and secured to protect the equipment and cables inside from environmental elements. · Read Prints and Maps: Examine Splice Matrix and redline maps to understand fiber routes and assignments. · Splice off color and multiple cables in one enclosure. · Jumping Trays: Routing fibers from one tray to another, possibly to optimize cable management, minimize signal loss, or create efficient pathways within the enclosure. · Splice Tie Point and Jumper Cases: Splicing fibers at a tie point involves connecting fibers from different cables. · Connect Jumper cables between jumper cases. · Rehab gel-filles cases: The process of refurbishing or rehabilitating gel-filled enclosures used in fiber optic networks. · Redlining and Documentation: Marking up or annotating existing drawings or documents with changes, updates, or corrections. · Case swaps and audits: Replacing one equipment case or enclosure with another. · Troubleshooting: Identifying, diagnosing, and resolving issues that can affect the performance and reliability of the network. · May pull cable through existing duct package, pull cable through conduit either manually, blowing, or mechanically, and splice and activate underground and aerial lines. · Other duties as assigned. Required Skills & Qualifications: General · Ability to do physical labor, climb ladders and poles, work in confined spaces, etc. · Ability to read blueprints for job specifications in placement of cables, location of utilities, etc. · Must be able to distinguish between different colors for connection of fibers. · Must be a self-starter and internally motivated to achieve corporate, department, and personal objectives. · Must have excellent interpersonal communication skills (oral and written) and be a team player. · Must possess excellent problem solving and decision-making skills. · Ability to use basic math skills to compute measurements, figure ohms, timecards, etc. · Ability to listen and to follow directions. · Must be organized, multi-tasked oriented, and maintain a neat and safe work environment. · Ability to work in high places on ladders and poles. · Ability to work in confined spaces. · Ability to distinguish different fiber connections. Physical Demands and Work Environment · Must be able and willing to work outdoors, subject to inclement weather conditions · Must be able to maintain visual and audible contact with other crewman and all moving or stationary persons/vehicles/objects to ensure safe coordination of movement · Must be able to work around heavy equipment and machinery · Must be able to stand or walk for long periods of time · Must be able to lift and carry up to 50 pounds · Routinely requires extended periods of bending, squatting, climbing, kneeling, pushing, pulling, lifting, lifting in awkward positions, standing, and twisting · Must be able to stand, walk, sit or be in other physically demanding positions for long periods of time · Must be able to work while wearing safety boots, safety glasses, hardhat, and any applicable safety gear Required Licenses/Certificates/Registrations: · OSHA 10 All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor. Requirements are representative of minimum levels of knowledge, skills, and/or abilities. To perform this job successfully, the incumbent will possess the abilities or aptitudes to perform each duty proficiently. This document does not create an employment contract, implied or otherwise, other than an “at-will” employment relationship.

Velocity Powersports is a top Motorrad Dealership that is growing and looking for talented and motivated Motorcycle Service Technicians, from Entry Level to Experienced. Motorrad Service Technicians are passionate about customer service, take pride in their work, and enjoy being part of a winning team that cares about their employees. This Dealership offers: Market leading pay plus bonuses increase for number of hours booked A great working environment with the latest equipment Structured, self-paced and paid training opportunities leading to manufacturer recognition Health, Dental, & Vision Insurance Life and Disability Insurance Paid time-off Climate controlled work environment Discounted Employee vehicle plan Unlimited overtime. As a Motorrad Service Technician, you will be responsible for performing diagnoses, repairs, and maintenance work for customer and dealership vehicles. You'll be at the forefront of innovative Motorcycle diagnostic technologies. • Receiving and carrying-out Repair Orders as dispatched • Performing diagnostic services and troubleshooting to determine repair needs (using test plans, wiring diagrams etc.) • Providing labor, time, and parts estimates for repair services • Performing high quality and efficient repair services for various Motorcycle systems, including engine, steering, suspension, brakes in accordance with Dealer and Factory standards • Performing Quality Control checks for repaired vehicles to ensure repairs are complete • Completing all required paperwork and documentation for repair services • Maintaining organized, clean workspace and accounting for dealership and personal tools at all times • Communicating directly and efficiently with Service Advisors and Parts Department Employees • Participating in continual Motorrad proprietary training/education programs to hone skills and develop expertise in industry leading Motorrad technologies and processes • Demonstrating behaviors consistent with Employer's values in all interactions Qualifications • At least 1-3 years of related mechanical / vehicular service & repair experience (Motorcycle / Powersport, Automotive, Heavy Equipment / Diesel, engine repair, etc.) • Passion for the Motorrad / Motorcycle riding lifestyle • High School Diploma or Equivalent • Demonstration of excellent mechanical, electrical, diagnostic and computer skills • Must be authorized to work in the USA without requiring sponsorship • Must have a Valid Driver's License with motorcycle endorsement • Must perform duties and responsibilities in a safe manner This Dealership offers associates a team environment, great benefits and ongoing training and support. If you are in alignment with core values of integrity, transparency, professionalism, respect and teamwork - now might be the time for you to accelerate your career as part of the best company in motorcycle repair. Apply today or refer a qualified friend! IND123

Job Description Position Title: Field Technician/Engineer Department: Construction Reports To: Project Manager / Quality Control Manager Location: Varies (Initial project assignment: Building 226-F) FLSA Status: Non-Exempt Pay Rate or Salary: DOE Work Schedule: 40 hours per week and regular overtime as required to maintain operations Summary The Field Technician/Engineer supports the execution of construction and demolition-related field activities through direct involvement in technical operations, inspections, documentation, and coordination with project supervision and quality control staff. This role is critical in supporting both quality and compliance with applicable specifications, safety protocols, and regulatory requirements. Essential Duties and Responsibilities Assist with field layout, verification of removals, and documentation of remnant locations and removal activities. Support the QCM in implementing the work packages required for project execution. Monitor and document field activities to ensure compliance with project specifications and applicable standards. Coordinate with subcontractors and craft labor to ensure safe removal techniques are used that avoid compromising SC/SS steel elements. Provide field measurements, sketches, or redlines to support "as-built" documentation. Support preparatory, initial, and follow-up inspections with the QCM. Observe and report any damage to SC/SS steel, ensuring immediate notification and documentation for repair assessment. Assist in maintaining project documentation, including photos, field reports, and daily logs. Ensure that materials and tools used for remnant removal are in proper condition and utilized according to work package requirements. Follow all OSHA, EM 385-1-1, and company safety procedures while working in active field conditions. Participate in toolbox talks, safety meetings, and quality briefings. Perform additional field or technical duties as assigned to support project needs. Qualifications and Experience Associate degree in engineering, construction technology, or a related field (or equivalent experience). 0-2 years of experience in field engineering, construction support, or technical field operations. Proficiency in Computer Aided Design and Drafting (CADD) software is required. Experience on federal or Department of Energy (DOE) projects is preferred. Familiarity with structural steel work, demolition, and removal activities. Basic understanding of NQA-1 requirements or willingness to train. OSHA 30-Hour Certification (or ability to obtain prior to assignment). Current First Aid, CPR, and AED certifications (or ability to obtain). Must be eligible to obtain DoD or DOE security clearance. Strong computer skills, including Microsoft Office and basic document control platforms. Excellent written and verbal communication skills. Special Skills Strong attention to detail in technical environments involving structural steel and safety-critical components. Ability to read and interpret technical drawings, specifications, and field documents. Familiarity with base metal repair tolerances and measurement tools. Strong organizational and time management abilities. Comfortable working in construction and demolition environments. Adaptability to shift priorities and work scopes. Ability to communicate effectively with both technical and non-technical personnel. Willingness to work in various field conditions and travel as required.

* Work in a safe manner, recognize and correct shop hazards, and comply with WBC, OSHA and DOT safety requirements * Serve as a safe and productive member of the Equipment Group * Confer with Shop Foreman / review work orders * Discuss service work with field superintendents. All field work must be approved and scheduled by the Shop Foreman * Inspect equipment to determine service / repair needs * Perform routine maintenance services and repairs for on-road vehicles, small tools (electric and gas) and light / heavy equipment ranging from portable generators to 40,000- pound track excavators * Test components / systems utilizing analyzers, gauges and computerized diagnostic devices * Disassemble units and inspect parts for wear / repair * Follow manufacturer's documents and WBC checklists to ensure equipment is thoroughly examined and maintained * Test-drive to verify equipment is functioning properly after maintenance / repair is complete to ensure the piece does not return "problem not fixed" * Equipment / Tool Tag - complete the white tab upon completion of work. * Daily Equipment Maintenance / Safety Inspection Checklist - include a blank checklist in all equipment with checklist tubes or cabs upon completion of the work * Document service records * Welding * Clean / wash equipment * Be available for emergency calls outside normal business hours * Perform job duties at shop location when not performing field services * Maintain supplies on field service truck and be responsible for service / repair of field service truck * Make improvement recommendations to Shop Foreman regarding field-based services / repairs * Perform all other tasks and duties as assigned * Perform all assigned roles, responsibilities, and related work processes / tasks in the safest possible manner. Ensure that a safe, accident/incident-free work environment is maintained for all co-workers, customers, clients, suppliers, etc. at all times ID21 Education and/or Experience * High School Diploma/GED - required * Automotive maintenance training / experience - required * Small tools (electric and gas) training / experience - required * Light / heavy equipment training / experience - required * Basic computer skills (typing, email, Internet) - required Knowledge, Skills and Abilities Required * Problem-solving, trouble-shooting, and mechanical reasoning * Analyzing and interpreting equipment service manuals, schematics, etc. * Focus, concentration, attention to fine detail, pride in workmanship * Thinking logically and critically * Making judgments and decisions at task and process levels * Listening, speaking, reading, and writing at a basic level Working Conditions * Indoors - frequently * Outdoors - frequently * Temperatures - seasonal * Loud noise - frequently * Forty to fifty-hour work week - frequently * Multi-activity worksites - frequently * Traveling out of town - frequently * Overnight out of town stays - periodically Certificates, Licenses, Registrations * Valid driver's license - required * CDL Class A driver's license - required 90 days after employment. * OSHA 10-Hour Certification - required; training provided by Wayne Brothers * OSHA 30-Hour Certification - desirable * First Aid/CPR - desirable * All-terrain material handler certification - required when offered by WBC * Aerial lift certification - required when offered by WBC * ASE Certification - desirable Physical Demands * Lifting, carrying, or moving up to 50 pounds * Standing for long periods of time * Frequent climbing, leaning * Manual dexterity Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy.

HVAC Data Center Technician - Florence, SC area Travel 90% About US:Munters is a global leader in climate solutions for mission-critical processes. We offer innovative, efficient and sustainable solutions for customers in industries where controlling indoor humidity, temperature and energy efficiency is mission critical. Climate control systems often account for a large percentage of energy consumption in many of our customers'operations. With an optimal climate system, we can help them to more efficiently use energy or waterresources and thereby reduce their climate and environmental impact. Sustainability is an important part of Munters' business strategy and value creation.We pride ourselves on fostering a dynamic and inclusive work environment where interns are valued members of the team and are given meaningful projects to work on.Job Summary:Data Center Service Technicians travel to customer sites to start up, commission and safely troubleshoot and repair Data Center equipment. This position requires the ability to work independently, and candidates should have strong diagnostic and troubleshooting skills. Requires some ability to manage the projects while onsite for start-up commissioning and coordination of other trades and services.Essential Functions and Responsibilities: Perform factory start-up, commissioning, warranty and billable service on Munters Data Center equipment and systems. Maintain and protect Munters equipment and property. Respond in a timely manner to all requests for service from customers or management. Provide customer training on Munters equipment. Provide technical feedback on equipment using detailed field service reports. Understand that Field Service's major role is one of instant response to customers' needs and focus as a part of a team always makes us available to our customer needs, urgent or otherwise. Requirements: 5+ years of experience and extensive knowledge in the Mechanical field specifically the HVAC field. Frequent travel required, up to 90%, across the USA by plane and car. Extensive knowledge in electrical troubleshooting, able to diagnose electrical issues with proficiency and record data. Knowledge of all safety procedures and requirements and has training in Arc flash, lock out tag out and other safety requirements. Understands and knows how to utilize all PPE associated with electrical safety. Extensive refrigeration knowledge. Understands how to pressure test, evacuate, and charge systems without assistance. Understands the refrigeration system concepts and can fully troubleshoot and diagnose refrigeration problems. Proficient in brazing and soldering. Holds a universal refrigeration card. Extensive knowledge in Controls, has experience with troubleshooting, programming, or downloading to controls systems. Understands PLC's and how to work with all types of platforms. Knows how to access information from PLC's and be able to adjust. Able to connect to a PLC with a computer to communicate and make changes. (Optional) State Licensed Master HVAC mechanic. This requires years of experience, training and testing along with experience working under other experienced professionals to achieve. Strong written and verbal communications skills Self-Motivated, with the ability to work independently. Ability to communicate well with other site personnel as well as Sales PM, Service Manager and Technical Support personnel. Education: High Diploma or equivalent. Trade School desired. Physical Requirements: Heavy Work: Exerting up to 75 pounds of force occasionally and/or up to 20 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects. Climbing, stooping, kneeling, crouching, reaching, standing, walking, pushing, pulling, lifting The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data, viewing computer terminals, expansive reading, etc. Work Conditions: You must wear personal protective equipment such as safety glasses, safety boots, hard hats, and hearing protection where the company requires. Ability to travel and be away from home for several days at a time. Willingness to take "On-call" duties as required. Willingness to occasionally work weekends and/or holidays. Willingness to work outdoors in all types of weather conditions. Willingness and ability to work 6 feet or more above the ground as required. Benefits: Competitive Salary Comprehensive health, dental, and vision insurance plans Flexible work schedule Generous vacation and paid time off 401K retirement savings plan with employer matching Professional development opportunities, including tuition reimbursement, and conference attendance Company-sponsored social events and team-building activities State-of-the-art equipment and tools to support your work Equal Opportunity Employer:We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. All offers are contingent on a pre-employment drug test and background check, as applicable for the position

The Service Technician will be responsible for providing service, maintenance, repairs, and troubleshooting/diagnostics on access control equipment and IP-based video systems, including but not limited to: electrified and non-electrified locks, card readers, ancillary door devices, IP and analog cameras, head-end video recording devices, wired and wireless systems, and intercom systems As a Service Technician, this person is expected to be a highly proactive and skilled individual and, at all times, maintain performance consistent with their core values Drive to commercial client sites with a company-issued vehicle to perform service, repair, troubleshoot, and detect access control equipment and IP-based video security systems Including, but not limited to: Electrified and non-electrified locks, card readers, ancillary door devices, IP and analog cameras, head-end video recording devices, wired and wireless systems and intercom systems Troubleshoot system installations in such a manner as to identify issues and apply the most effective and efficient resolution consistent with company installation standards; identify and repair physical security systems as required to ensure operability and compliance with any applicable building code Apply all necessary documentation for tracking of service-related issues Demonstrate knowledge and skill in the safe use of hand and power tools, analog and digital test equipment and CCTV testing devices Demonstrate proficiency in reading and understanding electrical schematics, CAD drawings and related documents for their use in low-voltage applications Establish and maintain effective working relationships with both internal and external customers Provide phone and on-line remote diagnostic support Perform other duties as assigned by Operations Management *Skills* Access control, Cctv, Alarms, Service, Security, Installation, Troubleshooting, Alarm installation, Customer service, Fire alarm, lenel, milestone, bosch, crash bars, mag locks, amag, DMP, Genetec *Top Skills Details* Access control,Cctv,Alarms *Additional Skills & Qualifications* 2-3 years experience servicing a variety of commercial electronic security systems: access control, video management, intrusion detection, and fire systems/alarms Ability to be on-call on a rotational basis to respond to emergency service calls Strong troubleshooting skills and mechanical and electronic aptitude Capable of lifting up to 50lbs and work on ladder heights of up to 16' Valid State Driver's License with at least one year of driving experience, a clean driving record (no major violations within last 36 months, no more than 1 accident in last 24 months, no more than one minor moving violation in last 24 months), a minimum level of insurance as required by Company policy, and the ability to safely operate a vehicle required High School Degree, Vocational School or equivalent is required Positive customer service; Excellent verbal and written communication skills for effective interaction with internal & external customers Be able to work independently or as a member of a team Ability to meet deadlines and work in a fast-based environment with minimum direction Understanding of Windows operating systems and overall IT network topology Highly proactive and skilled individual, and at all times maintain performance consistent with their core values Work Environment - This position operates Monday through Friday, 8 AM to 5 PM, mainly on customer sites in Beaufort County. Travel to Charleston or Savannah may be required. The primary work will be with Beaufort County school systems. This is a Contract to Hire position based out of Beaufort, South Carolina. *Job Type & Location* This is a Contract to Hire position based out of North Charleston, SC. *Pay and Benefits*The pay range for this position is $30.00 - $38.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) *Workplace Type*This is a fully onsite position in North Charleston,SC. *Application Deadline*This position is anticipated to close on Jan 30, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

The Field Service Specialist at Vantive is responsible for installation, repair, preventive maintenance, and training on electro-mechanical medical devices in clinical settings. This role demands strong technical troubleshooting skills, customer interaction, territory management, and adherence to safety and quality standards. The position requires frequent travel, autonomous work, and effective communication to ensure equipment performance and customer satisfaction in the healthcare industry. Vantive is a vital organ therapy company on a mission to extend lives and expand possibilities for patients and care teams everywhere. For 70 years, our team has driven meaningful innovations in kidney care. As we build on our legacy, we are deepening our commitment to elevating the dialysis experience through digital solutions and advanced services, while looking beyond kidney care and investing in transforming vital organ therapies. Greater flexibility and efficiency in therapy administration for care teams, and longer, fuller lives for patients- that is what Vantive aspires to deliver. We believe Vantive will not only build our leadership in the kidney care space, it will also offer meaningful work to those who join us. At Vantive, you will become part of a community of people who are focused, courageous and don't settle for the mediocre. Each of us is driven to help improve patients' lives worldwide. Join us in advancing our mission to extend lives and expand possibilities. The Field Service Technician is a key customer facing position that represents the Vantive brand in clinical and hospital settings. This position manages an assigned territory and travels to perform installation, repair, preventative maintenance, training, and other services on a variety of electro-mechanical medical devices. Field Technicians are hands-on and enjoy solving advanced technical problems, interacting with customers, applying attention to detail, working autonomously, variation in their work, and traveling. This position focuses on providing a positive customer experience, strong communication, and ensuring all services needs are met in a quality and timely manner. Essential Roles and Responsibilities • Perform installation, calibration, preventive maintenance, and repairs on a wide range of electro-mechanical medical equipment, ensuring compliance with SLAs, quality standards, and safety protocols. • Diagnose and resolve equipment failures, identifying root causes and implementing corrective actions using analytical and technical skills. • Manage service territory by scheduling service calls, preventive maintenance, and travel efficiently to meet SLA commitments. • Maintain accurate documentation of service activities, maintenance records, and inventory transactions; ensure test equipment is calibrated and functioning properly. • Plan and order necessary parts for service and maintenance, maintaining proper inventory control. • Provide training and guidance to customer personnel on equipment operation, maintenance procedures, and inspection techniques. • Communicate effectively with customers regarding service status, arrival times, and issue resolution to maintain strong relationships and customer satisfaction. • Represent the company professionally through positive attitude, appearance, and engagement with customers and colleagues. • Mentor and support other service technicians; contribute to departmental meetings, training events, and knowledge sharing through troubleshooting guides and best practices. • Contribute to team and organizational success by mentoring peers, sharing best practices, recommending service improvements, and keeping leadership informed of operational needs and challenges. • Participate in installation projects, field actions, and assigned initiatives; may lead projects as needed. • Ensure proper handling of delicate components and adherence to hospital regulations and environmental, health, and safety policies. • Manage travel to clinical and stakeholder sites for technical support, training, and meetings. • Demonstrate interpersonal skills that embrace Vantive's cultural values of Care, Own it, Trust and Innovate. • Perform other duties as assigned. Required Qualifications • Experienced in biomedical engineering, including installation, maintenance, and repair of medical devices, with the ability to diagnose issues, perform mechanical adjustments, and apply independent judgment to resolve complex equipment problems in compliance with safety and regulatory standards. • Demonstrated ability to work independently to effectively manage assigned territory. • Strong interpersonal skills with the ability to maintain a high level professional and courteous conduct with peers, internal and external customers. • Excellent verbal and written communication skills required. • Proficiency in Microsoft Office tools (Outlook, Word, Excel, Visio, Project, PowerPoint). • Able to work in healthcare environments while adhering to PPE protocols (e.g., gowning, mask), and meet the physical demands of the role including standing, kneeling, bending, and regularly lifting up to 50 lbs, with occasional heavier lifting using appropriate aids. • Ability to travel 50-75%, including overnight stays; willingness to drive long distances or fly as required. • Valid driver's license required. • Demonstrates alignment with Vantive's cultural values: Care, Own it, Trust, and Innovate. Experience and Education • Associate's degree or higher in Biomedical Engineering, Electrical/Electronic Engineering, Computer Science, or a related technical field • OR associate's degree or higher in non-related field with 3+ years of electro-mechanical troubleshooting experience. • OR Biomedical Engineering Technology (BMET) certification with 3+ years of electro-mechanical troubleshooting experience. • OR completion of a U.S. military electrical or electrical biomedical equipment technology program. • Previous field service experienced is strongly preferred. We understand compensation is an important factor as you consider the next step in your career. At Vantive, we are committed to equitable pay for all employees, and we strive to be more transparent with our pay practices. The estimated base salary for this position is $60,000 - $75,000 annually. The estimated range is meant to reflect an anticipated salary range for the position. We may pay more or less than the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on upon location, skills and expertise, experience, and other relevant factors. For questions about this, our pay philosophy, and available benefits, please speak to the recruiter if you decide to apply and are selected for an interview. US Benefits at Vantive This is where your well-being matters. Vantive offers comprehensive compensation and benefits packages for eligible roles. Our health and well-being benefits include medical, dental and vision coverage that start on day one, as well as insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance. Financial and retirement benefits include the Aon Pooled Employer Plan (“Aon PEP”), Vantive's 401(k) retirement savings plan, to help you prepare for your future. The Aon PEP is designed to help improve retirement outcomes by providing retirement resources more efficiently. The plan offers a robust set of investment options, financial education, and a suite of resources to support your retirement goals. We also offer Flexible Spending Accounts, educational assistance programs, and time-off benefits such as paid holidays, paid time off ranging from 20 to 35 days based on length of service, family and medical leaves of absence, and paid parental leave. Additional benefits include commuting benefits, the Employee Discount Program, the Employee Assistance Program (EAP), and childcare benefits. Join us and enjoy the competitive compensation and benefits we offer to our employees. For additional information regarding Vantive's US Benefits, please speak with your recruiter or visit our Benefits site: Benefits | Vantive Equal Employment Opportunity Vantive is an equal opportunity employer. Vantive evaluates qualified applicants without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity or expression, protected veteran status, disability/handicap status or any other legally protected characteristic. Know Your Rights: Workplace Discrimination is Illegal Reasonable Accommodation Vantive is committed to working with and providing reasonable accommodations to individuals with disabilities globally. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application or interview process, please click on the link here and let us know the nature of your request along with your contact information. Form Link Recruitment Fraud Notice Vantive has discovered incidents of employment scams, where fraudulent parties pose as Vantive employees, recruiters, or other agents, and engage with online job seekers in an attempt to steal personal and/or financial information. To learn how you can protect yourself, review our Recruitment Fraud Notice. Keywords: field service specialist, medical device maintenance, biomedical engineering, electro-mechanical troubleshooting, healthcare equipment repair, preventive maintenance, clinical service technician, customer training, territory management, technical support

Company: Atlantic Housing Foundation, Inc. Title: Lead Service Technician Atlantic Housing Foundation, Inc. is a 501(c) 3 not-for-profit affordable housing provider. Founded in 1999, we currently own and operate over 10,000 units of multifamily properties in 6 states and 37 cities. In addition to HUD, HAP and LIHTC properties, Atlantic Housing owns and operates low and mixed-income multifamily assets, student housing and senior housing. About the Lead Service Technician Role: The Lead Service Technician is responsible for ensuring that the physical aspects of the community meet the company's established standards for safety, appearance and operation within the budgeted financial goals. He or she will inspect grounds, building and other community features daily to identify, minimize and correct hazardous property conditions or liability concerns. Oversee the physical property, general maintenance repairs, unit make-ready, preventative maintenance, and construction or rehabilitation projects for the apartment community to ensure quality and expediency. Maintain well-organized and property stocked maintenance shop while adhering to safety standards. Under direction of Community Manager, the Lead Service Technician will supervise, train and schedule maintenance activities for maintenance staff. Check work progress of each maintenance staff on daily basis; provide immediate assistance and instruction if needed. Will be required to schedule and respond to on-call/after hour emergencies. Additionally, he or she is responsible for adhering to federal, state and local laws pertaining to Fair Housing and OSHA regulations. Why Should You Apply? You believe in the AHF mission and core values You are the best at what you do You meet the qualifications below Benefits Offered: Paid every two weeks Cell phone reimbursement every pay period Quarterly Bonus Incentive Payments Educational Reimbursement Opportunities for upward mobility 12 Paid Company Holidays 16 hours of Learning Time Off annually 32 hours of Volunteer Time Off annually Competitive Paid Time Off accrual This role is eligible for overtime Rent discount if living on-site Multiple health care insurance plans that cover medical, dental, prescription, vision, and employer HSA contributions · Competitive 401(k) Program with employer matching contributions Education and Experience: · High school diploma or equivalent (required) · 2+ years of supervisory experience (required) · 3+ years of multi-family maintenance experience or at least 3+ years of commercial maintenance experience (required) · EPA Sec 608 Certification - either a Type I (small appliances) plus Type II (AC's), or Type Universal (required) Meeting maintenance financial standards by providing annual budget information; monitoring expenditures; identifying variances; implementing corrective actions. Under direction of the Community Manager, accomplishing maintenance human resource objectives by training, assigning, scheduling, coaching, and counseling employees; communicating job expectations; planning, monitoring, and adhering to policies and procedures. Participating in improving maintenance operational standards by contributing maintenance information to strategic plans; implementing production, productivity, quality, and customer-service standards; resolving problems. · Familiar with plumbing repairs, tile work, HVAC equipment, appliances, carpentry repairs, electrical repairs and all facets of an apartment make ready. · Must have reliable transportation, a valid driver's license and be able to read, write and speak English. · Ability to stand and/or sit for long periods of time, as well as move through the community and maneuver around equipment, climb ladders for repairs, etc. · Must be willing to be on-call · Must be able to climb up and down a ladder. · Excellent communication skills. · Collaborative team player. Ability to lift and carry objects weighing 50 pounds or more. Ability to work occasionally in poor weather conditions, including heat, cold, rain, or snow. Atlantic Housing Foundation, Inc. is an EEO Employer - M/F/Disability/Protected Veteran Status View all jobs at this company

We are accepting applications for Travel Technicians to work at various locations across the United States. This job is 100% travel and will consist of installing low voltage wiring and equipment such as IP cameras, Wireless Access Points, Routers, Switches, etc. Qualified candidates should expect to be on the road anywhere from 2 - 8 months at a time. We are seeking a self-starter who can work well with a partner 6 days a week. The Travel Technician will be teamed up with a partner who will travel and work with them for the duration of the project. Responsibilities: * Pull and terminate low voltage cable. * Installing network equipment within commercial settings. * Follow instructions and code when pulling cable. * Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work. * Ensuring all cables are neatly tied and bundled according to safety regulations. * Installing of cable support structures such as j-hooks, cable racks, and inner duct. * Conduct tests to ensure all newly installed cable systems and component devices are operational. * Troubleshoot issues with the cable network. * Perform any other duties not specifically stated herein, but which your supervisor may assign. * Adhere to all required project safety requirements as set forth by the client, their customers, or OSHA. * Perform any other duties not specifically stated herein, but which your supervisor may assign. *Skills* low voltage, installation, wap, install, cctv, cable, cat5, cat6, Cabling, Cable installation, Cable puller, wireless access point, access control, punchdown, telecommunication, troubleshooting *Top Skills Details* low voltage,installation,wap,install,cctv,cable,cat5,cat6 *Additional Skills & Qualifications* Requirements: * Experience as a Data Cable Technician. * Available for extensive travel nationwide. * Ability to prioritize tasks. * Able to lift and carry 50 pounds or more multiple times per shift. * Ability to work in cramped spaces. * Hours of project 7 pm - 7 am 5 days a week. * Ability and willingness to travel to Lowell, AR for new hire orientation. * 100% travel of the USA * Ability to operate a scissor lift; and ability to work at heights. * Able to fill out the work order and take care of the tools provided by the office to do the job. * Abide by PPE requirements. Company provides hard hat, vest, and safety glasses. Must provide your own steel-toed boots. * Tools required by the technicians: hand tools, screwdrivers (both standard and Phillips), snips, punch down (impact), toner and probe, pliers, adjustable wrenches, joint pliers, and lineman pliers. * Valid driver's license with a clean driving record; no DUI or DWI in the last three years. Benefits: * Per-Diem paid $125 a day for food and lodging. * Company vehicle provided (traveling with a partner) *Experience Level* Intermediate Level *Job Type & Location*This is a Contract position based out of Summerville, SC. *Pay and Benefits*The pay range for this position is $19.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) *Workplace Type*This is a fully onsite position in Summerville,SC. *Application Deadline*This position is anticipated to close on Jan 26, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.