Field service technician jobs in Oklahoma City, OK - 400 jobs

We are accepting applications for Travel Technicians to work at various locations across the United States. This job is 100% travel and will consist of installing low voltage wiring and equipment such as IP cameras, Wireless Access Points, Routers, Switches, etc. Qualified candidates should expect to be on the road anywhere from 2 - 8 months at a time. We are seeking a self-starter who can work well with a partner 6 days a week. The Travel Technician will be teamed up with a partner who will travel and work with them for the duration of the project. Responsibilities: * Pull and terminate low voltage cable. * Installing network equipment within commercial settings. * Follow instructions and code when pulling cable. * Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work. * Ensuring all cables are neatly tied and bundled according to safety regulations. * Installing of cable support structures such as j-hooks, cable racks, and inner duct. * Conduct tests to ensure all newly installed cable systems and component devices are operational. * Troubleshoot issues with the cable network. * Perform any other duties not specifically stated herein, but which your supervisor may assign. * Adhere to all required project safety requirements as set forth by the client, their customers, or OSHA. * Perform any other duties not specifically stated herein, but which your supervisor may assign. *Skills* low voltage, installation, wap, install, cctv, cable, cat5, cat6, Cabling, Cable installation, Cable puller, wireless access point, access control, punchdown, telecommunication, troubleshooting *Top Skills Details* low voltage,installation,wap,install,cctv,cable,cat5,cat6 *Additional Skills & Qualifications* Requirements: * Experience as a Data Cable Technician. * Available for extensive travel nationwide. * Ability to prioritize tasks. * Able to lift and carry 50 pounds or more multiple times per shift. * Ability to work in cramped spaces. * Hours of project 7 pm - 7 am 5 days a week. * Ability and willingness to travel to Lowell, AR for new hire orientation. * 100% travel of the USA * Ability to operate a scissor lift; and ability to work at heights. * Able to fill out the work order and take care of the tools provided by the office to do the job. * Abide by PPE requirements. Company provides hard hat, vest, and safety glasses. Must provide your own steel-toed boots. * Tools required by the technicians: hand tools, screwdrivers (both standard and Phillips), snips, punch down (impact), toner and probe, pliers, adjustable wrenches, joint pliers, and lineman pliers. * Valid driver's license with a clean driving record; no DUI or DWI in the last three years. Benefits: * Per-Diem paid $125 a day for food and lodging. * Company vehicle provided (traveling with a partner) *Experience Level* Intermediate Level *Job Type & Location*This is a Contract position based out of Oklahoma City, OK. *Pay and Benefits*The pay range for this position is $19.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) *Workplace Type*This is a fully onsite position in Oklahoma City,OK. *Application Deadline*This position is anticipated to close on Jan 21, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

What success looks like in this role: Unisys Corporation is seeking an experienced On-Site Service Engineer (OSE) to support enterprise data center and server environments, including next-generation AI platforms. This is a hands-on, customer-facing role focused on maintaining uptime, resolving complex hardware issues, and delivering outstanding on-site service. Prior AI experience is not required-strong data center and server fundamentals are what matter most. What You'll Do Provide on-site support for Dell server and data center systems, ensuring rapid issue resolution and minimal downtime Perform hardware maintenance including server builds, swaps, component replacements, and firmware updates Troubleshoot system issues across hardware, firmware, and operating systems, escalating when appropriate Support both reactive and preventive maintenance following established procedures Collaborate with internal teams and customers during service events to ensure clear communication and resolution Document work performed and contribute to shared knowledge and best practices Participate in on-call rotations and support extended coverage when needed What You Bring Experience supporting servers or data center hardware in a field, enterprise, or customer-facing environment Hands-on skills with server components (CPU, memory, power supplies, GPUs, etc.) Familiarity with Linux or similar operating systems Strong troubleshooting and problem-solving abilities Comfortable working independently on-site and communicating clearly with customers Willingness to learn and support emerging technologies, including AI platforms You will be successful in this role if you have: 3-5+ years of experience in technical support, field service, or data center roles Associate or Bachelor's degree in IT or related field (or equivalent experience) Dell or other vendor certifications are a plus, but not required Ability to lift up to 50 lbs, travel to customer sites, and support flexible/on-call schedules This role is ideal for engineers or senior technicians who thrive in fast-paced, customer-facing environments and want to work hands-on with cutting-edge AI data center technologies. #LI-JV1 This role may require access to export-controlled commodities and technology. Therefore, to conform to U.S. export control regulations, applicant should be eligible for any required authorizations from the U.S. Government. Unisys is proud to be an equal opportunity employer that considers all qualified applicants without regard to age, caste, citizenship, color, disability, family medical history, family status, ethnicity, gender, gender expression, gender identity, genetic information, marital status, national origin, parental status, pregnancy, race, religion, sex, sexual orientation, transgender status, veteran status or any other category protected by law. This commitment includes our efforts to provide for all those who seek to express interest in employment the opportunity to participate without barriers. If you are a US job seeker unable to review the job opportunities herein, or cannot otherwise complete your expression of interest, without additional assistance and would like to discuss a request for reasonable accommodation, please contact our Global Recruiting organization at or alternatively Toll Free: (Prompt 4). US job seekers can find more information about Unisys' EEO commitment here.

Category Survey / Geospatial Type Full-Time Unleash Your Inner Explorer as a Survey Field Technician at Civil & Environmental Consultants! Are you ready for an exhilarating career where every day brings new challenges and discoveries? Civil & Environmental Consultants, Inc. (CEC) is searching for a Survey Field Technician to join our dynamic team, and that could be YOU! Imagine being at the forefront of diverse projects, where your expertise in topographic, boundary surveys and construction stakeouts lays the groundwork for groundbreaking developments. You won't just be performing tasks; you'll be an integral part of a survey field crew, bringing plans to life with your keen eye and precision! This isn't your average desk job. You'll be out in the field, harnessing the power of modern survey equipment and applying cutting-edge surveying principles and practices. Get ready to: Operate state-of-the-art Survey Equipment Navigate diverse terrains Take meticulous measurements that form the backbone of every project Record vital data and prepare detailed sketches Master surveying software applications, gathering, retrieving, and interpreting crucial data Perform essential survey computations that ensure accuracy and success This isn't just a job; it's a launchpad! As a Survey Field Technician at CEC, you'll build an invaluable foundation for further professional development and a rewarding career as a land surveyor. If you're eager to contribute to impactful projects, embrace the outdoors, and grow your expertise with a leading firm, we want to hear from you! Qualifications Minimum of 2 years of related survey experience; Experience with Construction staking preferred; Experience with Trimble Business Center (TBC), Autodesk AutoCAD 3D and Microsoft Office software; Ability to operate motorized equipment and possession of sufficient physical stamina to work outdoors under various field conditions; Valid Driver's License. About Us We have experts! CEC is consistently ranked as a Top 500 Design Firm and Top 200 Environmental Firm by Engineering News-Record. We are looking for people who enjoy using their education and experience to solve difficult technical problems and work on interesting projects. You can accomplish this while working with a team of professionals who are equally motivated to provide high levels of service to our clients and to teach you along the way. We have support! We have a variety of Employee Resource Groups, including CEC Community - focused on giving back to the communities in which we work; CEC Ignite - focused on helping professionals early in their careers to develop their pathway; CEC iDEA - focused on inclusion, diversity, equality, and acceptance; and CEC Women - focused on creating internal and external opportunities for women to network and leverage professional experience! We care about our people! People and Culture are two of the five elements of our strategic plan. When you care about your people, they will want to grow a career with you - that is our goal. CEC offers you a small-firm work environment with large-firm opportunities. Not only will we help you develop professionally, but we will also provide an opportunity to become an owner of the firm and share in its success. CEC offers a matching 401(k); profit sharing; a performance bonus; company stock; medical dental, and vision insurance; short and long-term disability; tuition assistance; professional development; and work-life balance. CEC is an equal opportunity and affirmative action employer. We do not discriminate in recruiting, hiring or promotion based on race, color, religion, sex (including sexual orientation, gender identity or expression, transgender status), national origin, age, disability, protected veteran status or any other basis or characteristic prohibited by applicable federal, state, or local law. THIRD PARTY RECRUITERS If CEC has not expressly requested recruiting services or contractually engaged with you for recruiting services on a specific position, any resumes or candidate profiles sent to CEC shall be considered unsolicited. Therefore, any such submissions will be considered property of CEC, with no associated fees due to your firm.

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Aeronautics Systems is looking to add a **Principal or Senior Principal Network and Communications Field Service Engineer** to our team at **RAAF Base Edinburgh** near **Adelaide, Australia** . This position will receive daily tasking and prioritization from their site lead. The selected candidate will be responsible for operations and maintenance support of the MQ-4C Triton network and communications systems at a Forward Operating Base (FOB). **Duties and Responsibilities:** + Provide real time support for flight operations and maintenance, addressing any issues related to communications and networking to include fault isolation, remediation, and resolution. + Perform field integration, troubleshooting, and repair of communications and data link systems in military flight test environment, including operations on a flightline, in a hangar, and in command-and-control centers. + Adherence to checklists and procedures to ensure repeated success and providing redlines to procedures when necessary. + Communicate complex technical issues to local support, the Degrader Action Cell (DAC), Main Operation Bases (MOBs), and Responsible Engineers (REs). + Support and lead air crew engagement for proper techniques in solving complex analysis of technical problems that arise during operations. + Assist with trend analysis as needed for Responsible Engineers (REs). + Perform/support review and analysis of supplier design data and definition of functional test requirements including acceptance, qualification, and system integration. + Take responsibility for the testing, maintenance, and integration of Comms and Networks equipment to include radio terminals, software loads, switches, routers, and firewalls required to support ground and flight test operations. + Work with system admins, maintainers, and onsite personnel to troubleshoot and repair any internal operational issues. ** The selected candidate will be put on a temporary Domestic Assignment and will report to our San Diego, CA site daily prior to international deployment while clearance(s), Visa(s), and other documents are processing. The employee will go through training in San Diego during this period. ** **The expected timeline before deployment is 3-4 months but this will vary.** Initially, this position will work a 9/80 shift. **As the program matures, the shifts may become 12-hour shifts that could include nights, weekends, and/or holidays.** The selected candidate will be required to work full-time, on-site in Australia. This position requires the ability to **travel up to 50%** of the time once in final location. _This position can be filled at either the Principal Field Service Engineer OR Senior Principal Field Service Engineer level, depending upon the qualifications below._ **Basic Qualifications for Principal Field Service Engineer:** + Bachelor's Degree in a STEM (Science, Technology, Engineering or Mathematics) discipline and 5 years of related engineering experience; OR a Master's degree in a STEM discipline and 3 years of related engineering experience; OR a PhD in a STEM discipline and 1 year of related engineering experience. + Ability to obtain and maintain DoD 8140 approved IAT Level II (or higher) compliant certification. Examples include: Security+CE, CCNP, and CISSP. This certificate must be obtained within a reasonable amount of time as determined by the company to meet its business needs. + Competence in Linux, troubleshooting, engineering documents, tools and equipment + Familiarity with comms/networking operations + Ability to support assignment at location (RAAF Base Edinburgh in Australia) for minimum of 18 months + Ability to pass a new hire physical if determined necessary by Company, based on OCONUS location. + **Active** **DoD** **Top Secret** clearance (with a background investigation within the past 6 years or enrolled into Continuous Evaluation). + Ability to obtain and maintain SCI access. + Ability to obtain a CI Polygraph. + Ability to obtain and maintain Special Access Program (SAP) clearance. This SAP must be obtained within a reasonable amount of time as determined by the company to meet its business needs. **Basic Qualifications for Senior Principal Field Service Engineer:** + Bachelor's Degree in a STEM (Science, Technology, Engineering or Mathematics) discipline and 8 years of related engineering experience; OR a Master's degree in a STEM discipline and 6 years of related engineering experience; OR a PhD in a STEM discipline and 4 years of related engineering experience. + Ability to obtain and maintain DoD 8140 approved IAT Level II (or higher) compliant certification. Examples include: Security+CE, CCNP, and CISSP. This certificate must be obtained within a reasonable amount of time as determined by the company to meet its business needs. + Competence in Linux, troubleshooting, engineering documents, tools and equipment + Familiarity with comms/networking operations + Ability to support assignment at location (RAAF Base Edinburgh in Australia) for minimum of 18 months + Ability to pass a new hire physical if determined necessary by Company, based on OCONUS location. + **Active** **DoD** **Top Secret** clearance (with a background investigation within the past 6 years or enrolled into Continuous Evaluation). + Ability to obtain and maintain SCI access. + Ability to obtain a CI Polygraph. + Ability to obtain and maintain Special Access Program (SAP) clearance. This SAP must be obtained within a reasonable amount of time as determined by the company to meet its business needs. **Preferred Qualifications for both levels:** + Active DoD 8140 approved IAT Level II (or higher) compliant certification. Examples include: CCNA Security, Security+CE, CCNP, and CISSP + Technical expertise in all areas of network and computer hardware and software interconnection and interfacing, such as routers, firewalls, switches + Experience with test equipment: network analyzers, spectrum analyzers, signal generators + Cisco Certified Network Associate (CCNA) certification + Experience with communication technologies; examples include Internet Protocol (IP) networks, Voice over IP (VoIP), Information Assurance (IA), satellite and Line-of-Sight (LOS) RF communications, control interfaces, and co-site interference + Operations and Maintenance experience at a field site Primary Level Salary Range: $85,600.00 - $128,400.00 Secondary Level Salary Range: $106,800.00 - $160,200.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

This is a doing hardware repairs and installations on laptop and desktop units. To be successful in this position, you must have prior experience with laptop and desktop hardware. Job Details: Pay is based solely on the number of calls completed. Calls start at $35 and go up based on distance traveled Pay period: Every Friday after the first week worked Tickets are run Monday-Friday during the day shift. Candidates must be regularly available a minimum of 3 weekdays to be considered. Call volume is variable but is usually 2-5 calls per day You will complete certifications from Dell and Lenovo as part of your onboarding. Certifications are online and free to you. You must have a reliable form of transportation and a valid driver's license to run these calls. You will be visiting multiple work sites throughout your day. You must have access to a computer and the Internet to log onto your portal each day. You must be available to log into your tech portal each morning you are working by 9 am to code your calls and map out your route for the day. The manufacturer has completed troubleshooting and shipped a part prior to your ticket being issued to you. You will confirm service times with the customer in your tech portal. Services will be completed at the customer site (residential and commercial) You will pick up parts daily from the assigned Fed Ex or UPS store for your territory before going onsite. Once all calls are completed for the day drop off the old parts with the pre-paid label that is provided. Qualifications Must have prior hands on experience with replacing components on laptops and desktops Must have a valid driver's license and reliable transportation Must be comfortable with daily local travel Additional Information All your information will be kept confidential according to EEO guidelines.

We Are: Accenture Song-a new breed of agency that's all about the Experience. For us, customer experience is not an add-on; it's foundational to who we are and how we empower our clients. As the world's largest, most disruptive agency, we drive lasting growth for clients by helping them design, build, and run meaningful experiences that make people's lives better, more productive, and more meaningful. We do this in three ways: by transforming organizations through standout products and services; by building and delivering award-winning campaigns so brands can engage and communicate creatively with customers at scale; and by using our top-notch skills to pilot, integrate, scale, and run the platforms that underpin the world's greatest experiences. Visit us here to learn more about what makes us the Experience Agency. The digital economy has caused a massive increase in the amount and importance of digital content. Digital content and the customer experience it fuels are, together, a vital expression of a brand's voice and purpose. We help leading brands create and deliver the right content for the right customer at the right time for immersive, relevant experiences. We offer an end-to-end approach to the content lifecycle and cut through the complexity for improved speed to market and relevance, at scale. Our unique tools and services organize, store, and optimize content, including taxonomy, rights and asset management, analytics, and quality assurance. Job Description: Develop and implement a comprehensive CCaaS transformation strategy that aligns with the company's vision and business goals. Lead strategic initiatives to enhance and expand our CCaaS offerings, driving innovation and differentiation in the marketplace. Communicate transformation goals, progress, and outcomes effectively to internal and external stakeholders. Market & Technology Insights: Stay abreast of industry trends, emerging technologies, and competitive dynamics to inform transformation strategies. Identify and leverage new opportunities to drive growth and enhance the value proposition of our CCaaS solutions. The work: * Works in a highly client-facing role to lead the end-to-end delivery lifecycle of complex, global and large-scale Service technology solutions for customer channel solutions & CCaaS solutions * Develops strong working relationships with the senior management team and identifies follow-on project opportunities * Manages and contributes to development of the platform migration and global roll out strategy and execution * Works with software and technology partners to design & deliver Service-focused solutions * Plans and estimates delivery work with an Agile approach, focusing on project milestones, resource planning (both on-shore and off-shore), scope, budget, risk identification and mitigation planning * Manages day to day on-shore and off-shore project teams during the project lifecycle * Manages the project ideation, gathering the high-level business requirements, defining the detailed requirements and process into epics and stories * Manages experience-led teams in developing strategic vision and creative UI/UX design * Interacts with client stakeholders for business justification, funding, scope, and timeline * Contributes to the ongoing development of solution/program offering approaches, methodologies, techniques, business development tools, and growing our resources Travel: As required for client support. Location: Primary residency within 90 minutes of an approved Accenture office Qualification Basic Qualifications: * 8+ years of experience in technology transformation, with a focus on CCaaS or cloud-based contact center solutions. * 7+ years of proven track record of selling and leading large-scale transformation projects and driving organizational change. * 7+ years of experience in strategic planning, project management, stakeholder engagement, strategic leadership and change management * 7+ years of experience with CCaaS technologies and industry best practices, including CCaaS strategy, migration and implementation on a variety of platforms such as, AWS, Google CCAI, Genesys, NICE etc. * 8+ years of experience in aligning technology capabilities with contact center benchmarks, quality metrics, agent scorecard etc. Good to have (preferred skills): * Minimum 10 years of experience with both Waterfall and Agile SDLC, implementing large, complex technology platforms. * 5+ years of experience implementing comprehensive end-to-end service center & field service software suites such as Salesforce, Oracle, Microsoft Dynamics, IFS, Genesys, Nice, Sprinklr, Twilio * Experience in algorithmic decisioning or interactive management * Strong understanding of PCI/PII security and data privacy requirements * Exceptionally strong leadership & communication skills to effectively manage client accounts and multidisciplinary teams * Experience in a consulting environment with demonstrated record of continuing responsibilities, creativity, and innovation in a complex global scale program (e.g., multi-country, language, brand, etc.) * Experience working with clients in various industry verticals such as Healthcare, Insurance, SLED - State/Local/Education, Public Sector, Retail Services etc. Compensation at Accenture varies depending on a wide array of factors, which may include but are not limited to the specific office location, role, skill set, and level of experience. As required by local law, Accenture provides a reasonable range of compensation for roles that may be hired as set forth below. We accept applications on an on-going basis and there is no fixed deadline to apply. Information on benefits is here. Role Location Annual Salary Range California $132,500 to $338,300 Cleveland $122,700 to $270,600 Colorado $132,500 to $292,200 District of Columbia $141,100 to $311,200 Illinois $122,700 to $292,200 Maryland $132,500 to $292,200 Massachusetts $132,500 to $311,200 Minnesota $132,500 to $292,200 New York/New Jersey $122,700 to $338,300 Washington $141,100 to $311,200 Locations

Who we are: DEX Imaging is a leading provider of document handling equipment and services with multiple offices and locations throughout the United States. We are the nation's largest independent provider of office technology. We are the industry leader in delivering excellent customer service every time and we do this by hiring and training great people. Working as a Service Technician you can expect: Full time schedule, working 40 hours a week Full benefits, competitive pay, and uncapped commissions Opportunity for training, development, and promotion Excellent corporate discounts Employee recognition and rewards program Regular business hours. We value work/life balance. Competitive PTO and Paid Holidays If you are career minded and ready to be an integral part of a team in a dynamic, innovative and upbeat atmosphere, then you belong right here on our award winning team. What's the opportunity: Service Technicians must be mechanically inclined, extremely reliable and trustworthy. They should be comfortable working independently and have excellent communication skills. In this role, Service Technicians perform diagnostics, service repairs and maintenance work on customer and dealer-owned copier equipment. Our technicians provide top notch customer care to all of customers and clients. What will you do: Provide service and customer support during field visits or dispatches. Manage all on site installation, repair, maintenance and test tasks. Diagnose errors or technical problems and determine proper solutions. Produce timely and detailed service reports. Follow all company's filed procedures and protocols. Cooperate with technical team and share information across the organization. Comprehend customer requirements and make appropriate recommendations/briefings. Update job knowledge by participating in educational opportunities; reading professional publications. Build positive relationships with customers. Works as part of a cohesive team within the shop to meet customer needs. Follows all safety practices of the organization when completing work assignments. Helps to maintain company vehicles, inventory and tools in proper working condition. Maintain knowledge on existing products and pursues additional technical and product knowledge by actively participating in the training programs of the dealership. Maintains communication with the customer and answers questions relative to the work being performed. Makes recommendations for additional work that needs to be completed. What you bring to the table: Must possess a valid driver's license Ability to manage service calls that require more time than anticipated without becoming frustrated or rushing through a job. Superb customer service skills and an ability to diagnose and solve problems from non-technical descriptions provided by their customers. What can DEX provide to you: Opportunity, career development and personal growth In house training Company culture where we celebrate our team members A place where you can stop going to work and you can start building your career The preceding has been designed to indicate the general nature of work performed; the level of knowledge and skills typically required; and usual working conditions of this job. It is not designed to contain, or be interpreted as, a comprehensive listing of all requirements or responsibilities that may be requires by employees in the job. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations made to enable individual with disabilities to perform essential functions. This job description does not imply or cannot be considered as a part of an employment contract. DEX Imaging as an Equal Opportunity Employer.

Now Hiring: Field Service Technician General Parts is looking for a skilled Field Service Technician to repair and maintain commercial kitchen equipment in schools, healthcare facilities and restaurants throughout your area. Pay & Benefits: $20-45/hr (based on experience) with growth opportunities Company vehicle - dispatched from home Ongoing training & career advancement Great benefits - PTO, 401(k) match, profit sharing, medical, dental, and more! What You'll Do: Troubleshoot, repair, and maintain commercial cooking, refrigeration, and HVAC equipment Provide service solutions for gas, electric, and steam systems Order and install replacement parts Participate in after-hours & weekend on-call rotations Why Join Us? Fully equipped - service vehicle, tools, tablet, cellphone, uniforms, and paid laundry Advancement - CFESA certification & ongoing training provided Extra earning potential - Overtime (Saturday), Double-Time (Sunday & holidays) What We Need: Valid driver's license and driving record that meets our safety standards Completion of a criminal background check and drug screen 2+ years of related experience, education, or military training preferred EPA certification (for refrigeration techs) Strong mechanical aptitude & ability to lift up to 50 lbs Must be at least 18 years of age General Parts Group is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military

The Military Field Service Representative (FSR) located in Tolemaida, Colombia, will support the Colombian military in their operation, management, repair, installation, and maintenance of assigned GE equipment for starting up and operating a T700 engine depot. In this role, the FSR will act as a liaison between GE Aerospace and the customer. Candidates must be mobile to meet the needs of the customer, program and business. **Job Description** **Job Title** T700 Depot Military Field Service Representative - Tolemaida, Colombia **Company Intro/About GE Aerospace** GE Aerospace is a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We power flight safely and reliably for today, tomorrow, and the future, partnering closely with customers to deliver high-quality outcomes with speed and efficiency. **Site, Business, OR Functional Area Overview** This role supports the startup and sustained operation of a T700 engine depot in Tolemaida, Colombia, serving the Colombian military's helicopter fleet. The Field Service organization is focused on operational readiness, on-time delivery, and cost-effective maintenance solutions that meet contractual and mission requirements. **Role Overview** The Military Field Service Representative (FSR) will serve as GE Aerospace's on-site liaison to the Colombian military, supporting depot startup and ongoing repair, installation, troubleshooting, and maintenance activities for T700 turboshaft engines. The FSR will coordinate technical support, drive issue resolution, and enable customer success while meeting contractual, safety, and quality objectives. **Key Responsibilities** + Act as the single point of contact to the customer for timely resolution of depot-level tooling, maintenance, repair, and engine management concerns + Establish and maintain strong on-site relationships to provide ongoing technical and business support + Provide hands-on technical assistance leveraging in-depth knowledge of T700 installation, operation, and troubleshooting to keep the customer on schedule + Use disciplined analytical methods to drive root-cause analysis; create presentations and spreadsheets (including pivot tables and Pareto charts) to track issues and implement lasting corrective actions + Exercise sound judgment to propose solutions beyond set parameters for complex maintenance and troubleshooting scenarios, drawing on internal and external resources + Lead low-risk projects and serve as a resource for colleagues; explain technical concepts and build consensus across maintenance, engineering, and management stakeholders + Uphold and promote safety, quality, delivery, and cost objectives; ensure compliance with export control and security requirements **Required Qualifications** + Fluent in Spanish and English (reading, writing, and speaking) + Bachelor's degree from an accredited college or university; or a High School Diploma/GED plus a minimum of 4 years in a field service representative or jet engine maintenance role + Minimum 3 years of field maintenance, modification, and repair experience on T700 engines + Strong oral and written communication skills with demonstrated ability to analyze and resolve problems + Ability and willingness to travel as required + Ability and willingness to obtain and maintain a U.S. Government security clearance **Desired Characteristics** + 5+ years of hands-on turboshaft engine maintenance experience + T700 experience across depot, organizational, intermediate, and flight line troubleshooting levels + Strong customer interaction and communication skills; proven leadership abilities + Demonstrated proficiency in repair troubleshooting, shop operations, testing of jet engines, and support equipment tooling + Ability to make formal presentations to maintenance, engineering, and management at all levels + Project management experience; ability to lead and influence customers and peers + Experience mentoring and transferring technical knowledge; strong written and oral communication + Ability to work independently with technical guidance as needed + High degree of tact and diplomacy to collaborate effectively with customers at all levels + FAA Powerplant license (preferred) **Additional Information** The base pay range for this position is $100,000.00-133,000.00 USD Annual The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on January 23rd, 2026 GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage, access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits includ tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time -off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or prog rams (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. © 2023 GE Aerospace and/or its affiliates. All rights reserved. Attorney-Client Privileged **Closing** At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), final offers will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Closing At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherw _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

WHO WE ARE Bruckner Truck & Equipment is one of the largest family-owned semi truck dealerships in the United States. We currently operate in 40+ locations across 12 states, and we have over 1,500 team members. Bruckner's is more than just a place selling parts and working on trucks We are an essential business delivering solutions to transportation providers - the backbone of everyday life as we know it We contribute to our local communities We care about our people OUR CORE VALUES We act with Honesty and Integrity. We value our people and communities. We are customer focused. We do what it takes. WHAT WE OFFER Competitive Compensation Plans Paid Time Off and Holidays Excellent health, dental and vision plans Investments in Training & Development Generous 401(k) and Profit-Sharing Plan Tuition Assistance Program Employee Stock Ownership (every employee earns shares and has ownership interest in the Bruckner's organization) Technician Student Loan Reimbursement Program Disability and Life Insurance Internal Promotion Opportunities Flexible Spending Account Health Club Reimbursement Family and Team Oriented Environment Employee Referral Bonus Engaging and Challenging Assignments Drug free workplace JOB DESCRIPTION 1. Oversight and scheduling of service operations including routine services, breakdowns, and after-hours calls 2. Perform and maintain daily lot check to better manage workflow into shop, prioritize order of operation, and keep yard/lot organized and neat 3. Work in process management- Closing and approving technician work orders, including making sure the correct parts are charged out, labor is correct, and comments are entered 4. Customer approval/communication on billable items, acquiring POs, sending estimates, and overall customer relationship management 5. Keep technicians on task and motivated- Assign work to techs based on skill and efficiency level 6. Ensure shop environment including work area, technician team, and shop tools are in compliant and safe condition; Assist with KPA safety inspection reports as required by management 7. Provide tech oversight and assistance, including diagnostic advice and additional support 8. Pickup and delivery of units and/or parts, making appearances at customer/vendor locations regularly 9. Keeping upper management updated daily on operations; This also includes communicating with Sales/Operations team as needed 10. Routine inventory audits/cycle counts as required by management 11. Perform repairs in shop as needed, able to fill in as Tier 1 Tech if necessary 12. Perform all other assignments as needed by management CERTIFICATIONS & REQUIREMENTS Class B CDL License FMCSA Brake Certified Proficient with all diagnostic programs including PTT, Insite, Bendix, and Allison Proficient with TDP and all applications within- Impact, Vin View, UCHP, etc. Profound understanding of Mack/Volvo/Cummins warranty schedule Familiar with Enrich program and inventory management Tier 1 Tech qualifications/skill level Want to know more about our family-owned company, Proud that our 1500+ employees view us as the employer of choice! YouTube - Leasing Department Video YouTube - Come Join The Family -Video YouTube - Since 1932 -Video Don't forget to Like and Subscribe! Keywords: Diesel OR Trucking OR Dealership OR ADP OR Mack OR Volvo OR Caterpillar OR Allison OR Cummins OR Dealer OR Heavy Equipment OR Trailer OR Truck Sales OR Deal Sheet OR Class A OR CDK OR Frame Shop OR Foreman OR Leasing OR Service OR Warranty OR Parts OR Office OR Semi Truck OR Mechanic OR Google Jobs OR Career OR B2B Outside Sales OR Sales Representative OR Commercial Sales, OR Fabrication #ZR

This is where your work makes a difference. At Baxter, we believe every person-regardless of who they are or where they are from-deserves a chance to live a healthy life. It was our founding belief in 1931 and continues to be our guiding principle. We are redefining healthcare delivery to make a greater impact today, tomorrow, and beyond. Our Baxter colleagues are united by our Mission to Save and Sustain Lives. Together, our community is driven by a culture of courage, trust, and collaboration. Every individual is empowered to take ownership and make a meaningful impact. We strive for efficient and effective operations, and we hold each other accountable for delivering exceptional results. Here, you will find more than just a job-you will find purpose and pride. Your role at Baxter: Our Field Service Technician II's primary responsibility is to perform complex repair work on all customer and company - owned medical equipment. In addition to the repair work, the FSII is also responsible for performing the same responsibilities as a FST I related to product readiness for patient utilization on a wide range of rental and customer owned medical products. This position requires operating a fleet vehicle in a safe manner as well as direct customer contact. Additionally, will provide 24/7 delivery, removal, and service support for products in service centers and customer accounts in a timely and professional manner. Our commitment to our mission means we are there when patients and healthcare professionals need us, during the critical moments that matter most! Your team: The field service team works within hospital and service setting environments to repair medical devices. Baxter offers dental, medical, and vision insurance, paid time off, parental leave, and more. What You'll Do: Performs electronic, hydraulic and pneumatic systems troubleshooting and repair of assigned products. Ability to troubleshoot devices and repair any malfunctioning components. Ability to use the appropriate tools in making required adjustments and repairs. Ability to provide on-call coverage, up to 24/7 basis including weekends and holidays, which may require customer account visits. Ability to load, unload, and remove medical products, weighing up to 1680 pounds. Generate service revenue and complete activities required under service contract. Safely operate box truck vehicle or company car ranging in size from a cargo van up to a 26,000 pound truck. What You'll Bring: Must be at least 21 years of age High school diploma or GED or equivalent experience Valid driver's license and driving record Basic mathematical skills - addition, subtraction, multiplication, and division Preferred Qualifications Technical or Trade School training DOT physical card (assistance is provided) Experience with FDA regulated products Experience in customer service Safety Requirements: Responsible for adhering to Hill-Rom Safety Procedures. Must wear personal protective equipment including but not limited to safety shoes, eye protection, gloves, and protective clothing. All equipment is provided. Frequently works in environments were biohazards could be present. i.e. Hospitals, Service Centers, and Depots We understand compensation is an important factor as you consider the next step in your career. At Baxter, we are committed to equitable pay for all employees, and we strive to be more transparent with our pay practices. The salary range for this position is $41,600-$62,400. US Benefits at Baxter (except for Puerto Rico) This is where your well-being matters. Baxter offers comprehensive compensation and benefits packages for eligible roles. Our health and well-being benefits include medical and dental coverage that start on day one, as well as insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance. Financial and retirement benefits include the Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount, and the 401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching. We also offer Flexible Spending Accounts, educational assistance programs, and time-off benefits such as paid holidays, paid time off ranging from 20 to 35 days based on length of service, family and medical leaves of absence, and paid parental leave. Additional benefits include commuting benefits, the Employee Discount Program, the Employee Assistance Program (EAP), and childcare benefits. Join us and enjoy the competitive compensation and benefits we offer to our employees. For additional information regarding Baxter US Benefits, please speak with your recruiter or visit our Benefits site: Benefits | Baxter Equal Employment Opportunity Baxter is an equal opportunity employer. Baxter evaluates qualified applicants without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity or expression, protected veteran status, disability/handicap status or any other legally protected characteristic. Know Your Rights: Workplace Discrimination is Illegal Reasonable Accommodations Baxter is committed to working with and providing reasonable accommodations to individuals with disabilities globally. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application or interview process, please click on the link here and let us know the nature of your request along with your contact information. Recruitment Fraud Notice Baxter has discovered incidents of employment scams, where fraudulent parties pose as Baxter employees, recruiters, or other agents, and engage with online job seekers in an attempt to steal personal and/or financial information. To learn how you can protect yourself, review our Recruitment Fraud Notice.

USA Compression Partners, LP (NYSE: USAC) provides mission-critical natural gas compression services to large upstream and midstream energy companies. We are an operations-centric, technology-driven employer with 800+ employees in 18 states across the US. We owe our success to the quality of our employees, our strong commitment to safety, and our superior service to our customers. Key Business Objectives: 3rd Party Lead Service Technician (LST) is responsible for leading 3rd Party projects, including maintenance and service, as well as overhauls of customer-owned equipment, reporting to the 3rd Party Service Manager. With minimal supervision and significant autonomy, the typical areas of responsibility include leading and developing 3rd-party field service technicians and serving as a subject matter expert for them. This role also involves safely performing scheduled maintenance, maintaining and building customer relationships, and providing first-line support for all projects related to 3rd-party services. The 3rd Party LST is involved in start-ups, major maintenance, significant failures, and high-end troubleshooting. USA Compression employees are proudly responsible for maintaining a safe and professional work environment and a positive workplace aligned with our Pillars culture. Duties and Responsibilities: * Involved in 3rd Party projects such as preventative maintenance (PM), failures, overhauls, and high-end troubleshooting and advanced diagnostic repair skills on a wide variety of equipment. * Lead by example and be a subject matter expert and role model to 3rd Party Field Service Technicians (FST) and assist in their technical skill and professional development. * Respond quickly and accurately to customer inquiries and communicate with 3rd Party Service Manager. * Partner closely with the 3rd Party Service Manager to ensure a smooth and efficient Area operation. * Maintain and safely operate the company vehicle/commercial truck according to company guidelines. * Utilize the Warehouse Management System (WMS) and partner with a parts department to ensure sufficient parts inventory for each unit in the Area. * Ensure Area units are clean following good housekeeping rules and maintain safe working conditions. * Assist in building the USAC culture through positively representing our image and helping recruit new FSTs. * Assist in supervisory duties in the absence of the 3rd Party Service Manager or as assigned by the 3rd Party Service Manager. * Understand and follow the company handbook and all company or customer safety and environmental policies. * Any other duties or responsibilities as assigned by the supervisor. * Full-time hourly position. Skills/Capabilities and Education: * Technical or trade school certification, college degree, or additional work experience in a related field. * At least 7 years of experience in gas compression with a preference for CAT, Ariel, and/or Cummins. * CAT Gas Engine II, Troubleshooting, Electronics certifications; CAT 3500, 3600, ADEM 3 and ADEM 4, Ariel Mechanics 1 and 2, Murphy panel a plus. * Valid driver's license with a Motor Vehicle Record history acceptable to USA Compression. * Strong interpersonal skills with strong written and verbal skills. * Excellent customer service skills with customer field personnel, onsite vendors, and other employees. * Ability to understand written and verbal communication from the company and supervisor, including training, procedures, instructions, etc. * Ability to be self-managed and work independently with little or no supervision. Prior management experience is a plus. * High degree of mechanical ability, including electrical and natural gas compression. * Ability to teach and communicate both technical and soft skills to FSTs, aiding in their training and development. * Experience reading and understanding technical manuals. * Thorough knowledge of relevant HSE procedures and regulations. * Experience in configuring natural gas compression equipment. * Solid computer and communication technology skills. * Ability and interest in further developing people and business management skills. * Ability and flexibility to work extended hours, including periodic on-call weekends. * Applicant must have the ability to legally work in the U.S. Working Conditions: * Typically, a 3rd Party LSTs workday consists of driving a USA compression service vehicle to customer locations to perform repair and maintenance activities. * Travel is required for up to 75% of the time worked. * Periodic lifting requirements in excess of 50 lbs. * Ability to stand and walk on uneven and varied terrain, climb ladders and stairs; and stop, squat, kneel, crouch, and crawl depending on the task requirements. * Exposure to extremes in temperature and weather conditions, depending upon assigned location. * Some exposure to high noise levels in excess of 85dBA that require ear protection, as well as exposure to potentially hazardous chemicals and materials. * Working conditions in natural gas compression vary from one job site to another. Some job sites are indoors in compressor stations, while other sites are outside, exposed to a variety of weather conditions. * There is a strong emphasis on safety while working with heavy equipment and machinery.

We are seeking a highly skilled and experienced Service & Controls Technician to provide advanced technical support for Nortek HVAC systems, with a strong emphasis on electrical troubleshooting, control systems, and customer support. This role combines hands-on expertise in HVAC controls with the ability to diagnose and resolve complex field and remote service issues. The ideal candidate will have a deep understanding of electrical systems, HVAC sequences of operation, and control integration, and will be a key contributor to product support, development, and customer satisfaction. Position Responsibilities: Provide expert-level remote and on-site troubleshooting for HVAC control systems, electrical components, and software integration. Interpret electrical diagrams, control programs, and technical documentation to resolve customer issues. Stay with issues through root cause analysis and resolution, coordinating with internal teams and external contractors. Customer & Field Support: Serve as a primary contact for technical support via phone, email, and other electronic media. Deliver exceptional customer service by guiding contractors, engineers, and building owners through system operation and problem resolution. Coordinate and lead field problem meetings, training sessions, and technical service visits. Controls Engineering & Documentation: Assist in the design and verification of control systems using DDC/PLC programming and HVAC control elements (motors, valves, sensors, actuators, etc.). Develop and maintain technical literature, training materials, and instructional videos. Support new product development and technology transfer initiatives across departments. Cross-Functional Collaboration: Work closely with engineering, manufacturing, and R&D to resolve service issues and implement permanent fixes. Participate in internal training and support other Nortek facilities in building and servicing units. Contribute to the development of service benchmarks, metrics, and continuous improvement initiatives. Education: High school diploma required; technical college or equivalent experience (10+ years) in electrical and refrigeration preferred. Bachelor's degree in engineering or computer science is a plus but not required. Technical Proficiency: Proficient in Microsoft Office Suite. Excellent written and verbal communication skills. Strong organizational and time management skills. Preferred Attributes: Customer-focused mindset with a passion for solving problems. Ability to work independently and collaboratively across departments. Motivated, creative, and enthusiastic about learning and innovation. Willingness to travel occasionally for field support and training. Position Requirements: 5-7 years of hands-on experience in HVAC system installation, maintenance, and troubleshooting. Strong practical electrical knowledge, including reading blueprints, wiring diagrams, and control schematics. Proven ability to manage complex service scenarios involving multiple stakeholders. Experience with DDC or PLC programming and HVAC control system design. Familiarity with bid documents, control plans, and specifications. Travel Requirement: Up to 50% About Nortek Air Solutions: Nortek Air Solutions, LLC (NAS) is a Madison Industries company. Madison Industries is one of the largest and most successful privately held companies in the world and has a robust portfolio of indoor air quality solutions. Madison builds entrepreneurially driven, branded market leaders that are committed to making the world safer, healthier, and more productive by creating innovative solutions that deliver outstanding customer value. NAS is the largest manufacturer of custom heating, ventilation, and air conditioning (HVAC) equipment in North America. Its products include FANWALL TECHNOLOGY , air handlers, packaged DX, vertical self-contained systems, energy recovery ventilators with integrated heating and cooling systems, coils and more. NAS has five strategically located manufacturing facilities which encompass over 2 million square feet of clean space and 180 sales representative offices. NAS's brands are known for innovation and advanced technology and provide customers with product solutions for every industrial need including commercial air handlers, clean room systems, and mission critical technology. NAS's end markets include healthcare, education, industrial, commercial, clean rooms, and data centers. Nortek Air Solutions, LLC, is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, sexual orientation, gender identity, status as a qualified individual with a disability, or any other characteristic protected by law. #nasjob1

Eurotek OKC is a top quality Motorrad Dealership that is growing and looking for talented and motivated Motorcycle Service Technicians, from Entry Level to Experienced to work with. Motorrad Service Technicians are passionate about customer service, take pride in their work, and enjoy being part of a winning team that cares about their employees. This Dealership offers: Market leading pay plus bonuses increase for number of hours booked A great working environment with the latest equipment Structured, self-paced and paid training opportunities leading to manufacturer recognition Paid time-off Climate controlled work environment Discounted Employee vehicle plan Unlimited flag time. As a Motorrad Service Technician, you will be responsible for performing diagnoses, repairs, and maintenance work for customer and dealership vehicles. You'll be at the forefront of innovative Motorcycle diagnostic technologies. • Receiving and carrying-out Repair Orders as dispatched • Performing diagnostic services and troubleshooting to determine repair needs (using test plans, wiring diagrams etc.) • Providing labor, time, and parts estimates for repair services • Performing high quality and efficient repair services for various Motorcycle systems, including engine, steering, suspension, brakes in accordance with Dealer and Factory standards • Performing Quality Control checks for repaired vehicles to ensure repairs are complete • Completing all required paperwork and documentation for repair services • Maintaining organized, clean workspace and accounting for dealership and personal tools at all times • Communicating directly and efficiently with Service Advisors and Parts Department Employees • Participating in continual Motorrad proprietary training/education programs to hone skills and develop expertise in industry leading Motorrad technologies and processes • Demonstrating behaviors consistent with Employer's values in all interactions Qualifications • At least 1-3 years of related mechanical / vehicular service & repair experience (Motorcycle / Powersport, Automotive, Heavy Equipment / Diesel, engine repair, etc.) • Passion for the Motorrad / Motorcycle riding lifestyle • High School Diploma or Equivalent • Demonstration of excellent mechanical, electrical, diagnostic and computer skills • Must be authorized to work in the USA without requiring sponsorship • Must have a Valid Driver's License with motorcycle endorsement • Must perform duties and responsibilities in a safe manner This Dealership offers associates a team environment, great benefits and ongoing training and support. If you are in alignment with core values of integrity, transparency, professionalism, respect and teamwork - now might be the time for you to accelerate your career as part of the best company in motorcycle repair. Apply today or refer a qualified friend!

Job Description Join the country's leading Cardiac PET provider! Cardiac Imaging Inc. (CII) is looking for talented and ambitious professionals to join our dynamic team and improve patient outcomes across the nation. Despite heart disease being the leading cause of death in the US, most physicians and patients do not have access to the leading technology in Cardiology. At CII, our mission is to create a more accessible healthcare system by enabling all physicians to treat their patients with the most advanced technology - all from the comfort of their own practice. Our innovative team drives this mission forward each and every day with our Mobile and Fixed Cardiac PET Solutions. As we continue to grow, we currently have a tremendous opportunity for a Senior Field Service Engineer who is up for the challenge. Summary: Responsible for providing installation, technical repair and service work in the field or at the hub for equipment and systems, including ensuring equipment in trailers does not interfere with the safety of operation of the trucks and trailers on roadways. Lead or assist with the installation and servicing of medical imaging equipment and provide assistance to Service Engineers, Technicians as well as Apprentices. Repair, replace or install parts and devices with expertise as required. Essential Functions: The following list of essential functions is not intended to be restrictive or all inclusive. The fact that certain duties may not be listed does not limit the assignment of additional and/or other duties. Independently complete full mobile unit load inspection to ensure secure road safety, including PET-CT and Uninterrupted Power Supply (UPS) secured to specifications, in addition to checking electrical system for fire hazards and safe operation, quarterly or at least bi-annually, or sooner if problems arise. Exercise discretion to identify whether repairs are needed and, if so, what repairs to make. Complete safety checklist of mobile unit inspection to identify any abnormalities, weekly for local units, or at least 5-6 times per year for remote units. Exercise discretion to identify whether repairs are needed and, if so, what repairs to make. Perform trouble shooting and field repairs. Provide phone support for customers and CII clinical staff regarding technical issues in a professional and friendly manner. Prepare/perform equipment Preventive Maintenance according to specification and documentation. Submit and fill out all required paperwork and service reports in a timely manner, no later than 48 hours. Preparing equipment for customer installation, including staging system and testing for functionality including Packing, for PET/CT system, PET system, CT system, elution system, computer, laptop, dose calibrator, blood pressure monitor, ECG system, and systems for image data transfer. Parts testing at hub locations. Leading installation and deinstalls as required. Support team members especially service technicians and service apprentices in their trouble shooting, training and guidance for field repairs or preventive maintenance. Find spare parts if needed or support Inventory specialist in parts acquisition. Conduct training classes for existing or new equipment service. Inspect and report irregularities, cleanliness, defects of CII assets, including mobile and fixed sites. Maintain tools and calibration requirements. Always adhere to safety procedures. Travel up to 80% of the time. Other related duties as assigned. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job Physical activity - talking, hearing, balancing, stooping, kneeling, crouching, reaching, standing, pushing, pulling, lifting, grasping, and fingering. Medium work - exerting up to 50 pounds of force occasionally and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Visual Acuity - The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. The worker is required to have visual acuity to perform an activity such as: operates machines where the seeing job is at or within arm's reach; performs mechanical or skills trades tasks of a non-repetitive nature. The work is required to have the visual acuity to operate motor vehicles and/or heavy equipment. Travel: Extensive nationwide travel is required for this position, on a moment's notice if needed, including overnight stays. Qualifications and Requirements: An Associate's degree in electronics or equivalent work experience Five (5) or more years of Siemens Biograph system staging, installation and troubleshooting Two (2) or more years of experience as a Service Engineer with an established service organization or OEM in the Nuclear Medicine field or completed CII training. Basic computer skills, MS Suite Valid Driver's license and clean driving record Reliable Transportation Ability to travel US wide Ability to read operating manuals and instructions Ability to communicate fluently both verbally and in writing Problem-solving skills and ability to exercise independent judgment and discretion Knowledge of electronic safety and procedures, low to high voltage Electronics/Mechanical background Advanced Knowledge of PET/CT and or PET Self-driven, motivation to succeed Ability to learn company policies and adhere to them in the performance of all assigned duties and communicate any compliance deviations to management in a timely manner

Now Hiring Field Service Engineer Level 2! 💰 Salary: Flexible based on experience Who We Are: Tri-Imaging Solutions is at the forefront of medical imaging equipment innovation, specializing in enterprise imaging systems management. We're committed to pushing boundaries and delivering cutting-edge solutions to the industry. Join our dynamic team and build your career in medical imaging technology. What's in It for You (Benefits): • Highly competitive salary • Car/travel reimbursement • Hands-on diagnostic imaging training • Company-paid holidays plus PTO • Major medical/dental/vision benefits • 401/k with company contribution Position Overview: We are seeking an experienced Level 2 Field Service Engineer to join our growing team. This role requires a seasoned professional with at least 5 years of hands-on experience servicing medical imaging equipment. The ideal candidate will be skilled in troubleshooting, repairing, and maintaining diagnostic imaging systems-including but not limited to X-ray, mammography, CT, and MRI-and capable of working independently in healthcare environments. What You'll Do: • Perform inspections, calibrations, installations, upgrades, and repairs on a range of radiology imaging equipment (X-ray, Mammo, CT, MRI) • Diagnose and resolve complex technical issues with minimal supervision • Conduct preventive and corrective maintenance to ensure compliance with performance and safety standards • Collaborate with OEM technical support and healthcare professionals to deliver outstanding service • Maintain detailed service records and documentation for compliance and reporting • Provide equipment demonstrations and in-service training for healthcare staff when needed What You'll Need (Requirements): • Minimum 5 years of experience in servicing diagnostic imaging equipment required • Associate or bachelor's degree in Biomedical Engineering, Electronics, Electrical Engineering, or related field-or equivalent military/technical experience • Proven ability to troubleshoot and repair imaging systems independently • Strong mechanical, electrical, and computer skills; adept with test equipment and diagnostic software • Familiarity with OEM service documentation, safety regulations, and industry standards • Excellent communication and customer service skills • Dependable, flexible, and able to manage travel schedules (including evenings, weekends, or holidays as needed)

This person will primarily install security-based systems, such as access control, CCTV, and commercial fire alarm systems. The role will consist of working alongside a lead technician or crews who will perform full installations, including testing, repairs, and servicing a variety of systems and equipment, which may include various low-voltage systems. As the tech gains more experience, they will gain more exposure to how they operate, and they will be given more license to work on access control, security, CCTV, and fire alarm systems independently, with the opportunity to be converted into an FT employee. This person will primarily work in the OKC area, including Stillwater, for a major project. *Skills* low voltage alarm, alarm installation, access control, card readers, badge readers, keypads, cctv, IP cameras, fire alarm, fire alarm system, fire alarm installation, fire alarm systems *Top Skills Details* low voltage alarm,alarm installation,access control,card readers,badge readers,keypads,cctv,IP cameras *Additional Skills & Qualifications* Technicians must be able to have strong customer interfacing skills. Technicians need to have some thick skin with other team members especially early to fit in with the culture both internally and externally. Must be able to take direction and coaching. *Experience Level* Entry Level *Job Type & Location*This is a Permanent position based out of Oklahoma City, OK. *Pay and Benefits*The pay range for this position is $49000.00 - $50000.00/yr. Medical, dental, vision 401k match PTO *Workplace Type*This is a fully onsite position in Oklahoma City,OK. *Application Deadline*This position is anticipated to close on Jan 28, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

We Are: Accenture Song-a new breed of agency that's all about the Experience. For us, customer experience is not an add-on; it's foundational to who we are and how we empower our clients. As the world's largest, most disruptive agency, we drive lasting growth for clients by helping them design, build, and run meaningful experiences that make people's lives better, more productive, and more meaningful. We do this in three ways: by transforming organizations through standout products and services; by building and delivering award-winning campaigns so brands can engage and communicate creatively with customers at scale; and by using our top-notch skills to pilot, integrate, scale, and run the platforms that underpin the world's greatest experiences. Visit us here to learn more about what makes us the Experience Agency. The digital economy has caused a massive increase in the amount and importance of digital content. Digital content and the customer experience it fuels are, together, a vital expression of a brand's voice and purpose. We help leading brands create and deliver the right content for the right customer at the right time for immersive, relevant experiences. We offer an end-to-end approach to the content lifecycle and cut through the complexity for improved speed to market and relevance, at scale. Our unique tools and services organize, store, and optimize content, including taxonomy, rights and asset management, analytics, and quality assurance. Job Description: We are looking for a highly effective field service capability technology Delivery Lead to join our Song team. An individual filling this role will be responsible for the overall success of field service technology focused Service Experience programs, focusing on the client relationship, financials, project delivery, resourcing, and overall program health. Ideal candidates will have a consulting background and will have experience managing programs that combine strategy, field service experience design, and technology architecture & delivery disciplines. The work: * Works in a highly client-facing role to lead the end-to-end delivery lifecycle of complex, global and large-scale Service solutions crossing customer channels and service center Backoffice service solutions. * Develops strong working relationships with the senior management team and identifies follow-on project opportunities * Plans and estimates delivery work with an Agile approach, focusing on project milestones, resource planning (both on-shore and off-shore), scope, budget, risk identification and mitigation planning * Manages day to day on-shore and off-shore project teams during the project lifecycle * Manages the project ideation, gathering the high-level business requirements, defining the detailed requirements and process into epics and stories * Manages experience-led teams in developing strategic vision and creative UI/UX design * Manages and contributes to development of the platform migration and global roll out strategy and execution * Interacts with client stakeholders for business justification, funding, scope and timeline * Contributes to the ongoing development of solution/program offering approaches, methodologies, techniques, business development tools, and growing our resources Travel: As required for client support. Location: Primary residency within 90 minutes of an approved Accenture office Qualification Basic Qualifications: * Minimum 7+ years of experience leading the successful delivery of Field Service platform architecture and delivery projects * Minimum 7+ years of experience delivering projects which have integrated one or more of the functional capabilities listed below: * Field service platform suites such as Salesforce, Oracle, Microsoft Dynamics, IFS, ServiceMax * Service Delivery enablement (field worker, 3rd party management) * Distributed Service support networks * AI powered service operations Bonus points: * Experience with Service Delivery Operations (Service Center, Call Center, Field Service Operations) * Minimum 5 years of experience with both Waterfall and Agile SDLC, implementing large, complex web sites, commerce applications or marketing automation platforms. * Experience with Service channel experience design, implementation and execution * Experience with defining, designing and implementing a development architecture leveraging CI/CD principles * Strong knowledge of project management methodology including the ability to develop detailed work plans and specifications, identify and resolve issues, manage risk, and run team meetings * Exceptionally strong leadership & communication skills to effectively manage client accounts and multidisciplinary teams * Experience in a consulting environment with demonstrated track record of continuing responsibilities, creativity, and innovation in a complex global scale program (e.g., multi-country, language, brand, etc.) * Experience working with clients in the CMT (Communications, Media, Technology) space * Bachelor's degree Compensation at Accenture varies depending on a wide array of factors, which may include but are not limited to the specific office location, role, skill set, and level of experience. As required by local law, Accenture provides a reasonable range of compensation for roles that may be hired as set forth below. We accept applications on an on-going basis and there is no fixed deadline to apply. Information on benefits is here. Role Location Annual Salary Range California $94,400 to $266,300 Cleveland $87,400 to $213,000 Colorado $94,400 to $230,000 District of Columbia $100,500 to $245,000 Illinois $87,400 to $230,000 Maryland $94,400 to $230,000 Massachusetts $94,400 to $245,000 Minnesota $94,400 to $230,000 New York/New Jersey $87,400 to $266,300 Washington $100,500 to $245,000 #LI-NA Locations