Field technician jobs in Brick, NJ

We are seeking a skilled Field Technician to service, maintain, and repair low voltage public transportation equipment for NJ Transit. This position involves working at rail stations and bus garages throughout Central New Jersey, focusing on critical fare collection systems including Ticket Vending Machines (TVMs), fare gates, Ticket Office Machines (TOMs), bus validators, and fareboxes. Key Responsibilities Equipment Maintenance: Service and maintain low voltage fare collection equipment including Ticket Vending Machines, fare gates, Ticket Office Machines at NJT rail stations, as well as validators and fareboxes on buses at bus garages Field Service: Perform on-site troubleshooting, diagnostics, and repairs at train stations, bus garages, and transit facilities throughout New Jersey System Installation: Install, configure, and upgrade fare collection hardware and software systems for station-based equipment and bus-mounted fare collection devices Preventive Maintenance: Conduct routine maintenance schedules and system health checks to ensure optimal equipment performance across both rail and bus systems Technical Support: Provide technical assistance and basic training to station personnel, bus operators, garage staff, and NJT staff Documentation: Maintain detailed service records, repair logs, and maintenance activities for all equipment serviced Safety Compliance: Follow all safety protocols and procedures when working in active rail station environments and bus garage facilities Qualifications Required: Associate's degree in Electronics, Electrical Technology, or related technical field 2+ years of field service experience with low voltage systems or electronic equipment Strong knowledge of electronic circuits, diagnostic tools, and repair techniques Familiarity with public transportation systems and fare collection technology preferred not required Valid driver's license with clean driving record Ability to operate a company truck for daily travel to multiple work sites Ability to work independently with minimal supervision Flexibility to work variable hours as needed to meet project demands Schedule flexibility is essential: Must be willing and able to work weekends, holidays, and overtime as needed for emergency repairs and system maintenance Preferred: Experience with transit systems or public transportation equipment is a plus Knowledge of point-of-sale systems, card readers, or payment processing equipment Understanding of industry regulations and safety standards Excellent problem-solving and communication skills Customer service experience Physical Requirements Ability to lift and carry up to 50 lbs of equipment and tools Comfortable working in active rail station environments and bus garage facilities (indoor/outdoor conditions) Ability to work around moving trains, buses, and in station platform areas Capable of standing, kneeling, and working in various positions for extended periods Manual dexterity for handling small electronic components and tools Work Details Contract Duration: 6 month project with possibility of extensions Primary Schedule: 1st Shift 5am-1:30pm and 2nd shift 1pm-9:30pm Monday through Friday with rotating weekends and holidays Schedule Flexibility Required: Must be available for flexible hours, weekend work, holidays, and emergency calls as needed to maintain critical transit systems Location: Various NJT rail stations and bus garages throughout Central New Jersey Travel: Assigned to multiple stations and garages but may need to assist at other locations during a shift (Company Truck provided) Environment: Active rail stations, platforms, bus garages, and operational transit environments

Job Description: Lighting Control Field Technician About the Role The Lighting Control Field Technician is responsible for installing, maintaining, and troubleshooting advanced lighting control systems across a variety of client environments. This role requires strong knowledge of electrical systems, low-voltage technologies, and modern networking to ensure seamless system performance. Technicians will work with both hardware and software components and collaborate closely with project managers and clients to deliver customized lighting solutions that improve ambiance, functionality, and efficiency. The role also involves conducting on-site training to help clients confidently operate their lighting control systems. Minimum Qualifications High school diploma or equivalent Proven experience installing and maintaining lighting control systems Strong understanding of electrical systems and wiring Strong understanding of networking, low-voltage systems, and home automation technologies Preferred Qualifications Associate's degree in electrical engineering, electronics technology, or a related field Certification in lighting control systems or related technologies Experience programming lighting control software Lutron certification(s) (e.g., HomeWorks QS, RA2, RA3) preferred Familiarity with integrating Lutron systems into third-party home automation platforms (e.g., Crestron, Control4, Savant) Responsibilities Install and configure lighting control systems based on project specifications and client needs Perform routine maintenance, diagnostics, and troubleshooting to ensure optimal system performance Collaborate with project managers and clients to assess requirements and deliver tailored solutions Conduct on-site training to ensure clients are comfortable operating their lighting systems Document installation processes, maintenance work, and client interactions for quality assurance and reference Skills Strong understanding of electrical systems and safe wiring practices Technical proficiency with lighting control hardware and software Knowledge of networking, low-voltage systems, and home automation technologies Ability to integrate lighting systems with broader automation platforms Strong communication skills for client collaboration and training Effective problem-solving skills for diagnosing and resolving technical issues (Preferred) Programming knowledge for advanced system customization

Hello Job Seekers, Hope you are doing well. I am Mohit Saini from Pride health and hiring for the below mentioned roles, Please let me know if you are available or looking for a job change. Please refer your friends/colleague if you are not looking for this opportunity. Job Title: Desktop Support Technician Location - Manhattan NY 10065 Shift- Mon-Fri, 9 AM to 5 PM Rate Range - $22 to $25 Per hour 6 Months (Contract) with possible extension Responsibility: At least 1 yr exp in a computer support is required & tech support exp. Must have strong customer service skills, good communication. Ability to earn quickly and new technologies. Able to work in a team environment as well as being self-motivated. Minimum of 1-2 years of tech support exp required. Support 466 Lex Ave: customer service, hardware deployments, mobile phone deployments, application installs, wire management ,inventory control, Techstop. Bachelors in Computer Science is must. Thanks & Regards, Mohit Saini Team Lead, EST **************************** *****************************************************

Multiple Positions Available! We are expanding our team and currently hiring Plumbing and HVAC Service Technicians, Plumbing Superintendent for New Construction Project within our company. Read all the information about this opportunity carefully, then use the application button below to send your CV and application. These positions offer the opportunity to work in a collaborative environment, contribute to meaningful projects, and grow professionally within a fast-moving organization. We are seeking a skilled and customer-focused Plumbing Service Technician to join our growing team. xevrcyc The ideal candidate will diagnose, repair, and install residential and/or commercial plumbing systems while providing top-tier customer service. Benefits • Competitive hourly wage or salary • Overtime opportunities • Paid time off and holidays • Company vehicle, tools, and uniforms provided • Ongoing training and career advancement opportunities

Job Title: Service Technician I (1+ Years Experience) The following information provides an overview of the skills, qualities, and qualifications needed for this role. Reports To: General Manager/ Hiring Manager Location Address: 178 US-206 Hillsborough Township, NJ 08844 Why You Should Join the Service Experts Team? Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth. Join us and become an EXPERT! Service Experts Company Perks and Benefits for YOU Top Pay for Top Performers, including incentive and bonus opportunities, depending on the position Up to $130,000 on average First Year Total Compensation" Total Compensation is Hourly plus Spiffs/Commissions***Depending on Center this could be more Generous PTO provided: 20 paid days off within your first year of employment (vacation & national holidays) 25 paid days off after your 2nd year of employment No layoffs during "Slow Season" - due to our extensive customer base, you will never have to worry about not being able to provide for your family year-round Ready to get out of your work truck? We have ample advancement and career-growth opportunities available across the U.S. Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programs Company-provided smart phone, tablet, uniform plan, and tool replacement program We'll make you better at what you do with our internal Training Academy Best-in-class 401(k) Retirement Savings Plan with attractive company matching contributions Company-paid employee Life Insurance with options for YOU and your Family! Short-term and Long-term disability insurance options that will protect you and your family if you are unable to work Supplemental benefit programs such as: Legal advice, pet insurance, and health advocacy programs Come join the BEST and the BIGGEST team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing! Key Responsibilities: Works under minimal supervision to perform residential and/or light commercial service and maintenance calls Analyzes, diagnoses, and resolves customer problems in a courteous, professional, timely, and accurate manner Diagnoses and performs services on heating, air conditioning, ventilation, and refrigeration equipment as well as accessories in an accurate and timely manner Inspects equipment and performs diagnostics on equipment to identify potential problems to prevent premature and unexpected breakdowns or callbacks Completes routine maintenance and equipment cleaning as needed or required Responsible for delivery and removal of parts and equipment needed to complete service work Using hand-held device records all required information on customer call. Completes all forms and paperwork in a neat, timely, complete, and accurate manner. Collects payment from customer. Communicates with dispatch, while on duty, to ensure dispatcher has an accurate status report of activities and availability Responsible for delivery of excellent customer service and sustaining high levels of customer satisfaction Promotes products and services to the customer. Calls Sales and Service Coordinator with specifics on replacement product sales leads generated from customer service visit. Ensures company property, vehicles, and tools are being used, maintained, and properly accounted for Represents the company professionally, honestly, and ethically in all business matters and activities Follows standard procedures and process, ensures that the company vehicle is properly stocked, returns defective warranty parts to the branch, and orders/replenishes vehicle stock as needed Performs similar/other duties as needed or assigned Regular, reliable attendance Health & Safety Roles and Responsibilities Reports any unsafe acts, conditions and hazards to direct supervisor/manager immediately Reports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediately Corrects substandard acts or conditions within area of control Uses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s) Never removes or renders ineffective safety guards, devices, or clothing prescribed to be in place or worn Complies with the general rules as prescribed by company program(s) procedure(s) Operates devises or equipment as prescribed by company program(s) or procedure(s) Participates in any safety initiatives, teams, or committees Reports all injuries or incidents as prescribed by company program(s) or procedure(s) immediately Provides input on developing safety initiatives and plans to eliminate exposures that could cause accidents Does not perform act that may endanger the safety or well-being of others Does not engage in any pranks, contests, or rough boisterous behavior Works in compliance with applicable legislative requirement Qualifications: High school diploma or GED with additional training and 1+ years' experience in HVAC with technical training certification required Must possess all valid licensing or certification as required by federal, state, provincial, or local governmental laws or regulations for the geographical work area EPA and safety certifications required Skilled at servicing heating, air conditioning, and ventilation equipment as well as related accessories Proficient mechanical aptitude and the ability to operate all necessary tools and equipment Proficient and able to operate all necessary tools and equipment to perform various service projects Proficient at reading wiring diagrams and troubleshooting problems with electrical, refrigerant and duct systems on HVAC equipment Proficient and able to properly start up and balance airflow and to properly align belts and pulleys on all systems with little to no supervision Proficient and able to install a basic duct fitting Proficient at troubleshooting and repairing electronic air cleaners, refrigeration systems, hot water systems, steam boiler systems, humidifiers, and related equipment with little to no supervision Effective communication skills to communicate with customer and resolve customer issues, complaints, or concerns Effective and efficient time-management and organizational skills Valid driver's license with acceptable driving record Available to work flexible hours and on-call shifts as needed Ability to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces to access HVAC units. xevrcyc Ability to continually climb, balance, stoop, kneel, crouch, and/or crawl. Ability to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areas Ability to safely climb 300lb load capacity rated ladders with a 30lb tool belt Natural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perception Ability to lift up to 75 pounds and ability to lift and carry items weighing up to 50 pounds Annual Compensation Range $55,361.28 to $69,201.60

Honest Networks is dedicated to delivering high-quality and affordable internet service as a catalyst for community growth, fostering learning, creativity, and enjoyment. We are a rapidly expanding, venture-backed internet service provider headquartered in Manhattan. We focus on offering gigabit internet service at transparent and affordable prices, all while providing exceptional customer service. We achieve this goal by employing individuals with high integrity, a strong work ethic, and a passion for continuous learning. If working in a fast-paced, results-oriented, and mission-driven environment excites you, we encourage you to apply and join our team. Learn more at *************** About the Role Honest Networks is seeking Field Technician Installers who are enthusiastic about expanding our internet network services! As an Installer, your primary responsibility will be installing equipment, terminating connections, conducting tests, and troubleshooting various cabling for our residential customers. We cover metro regions in New York City, suburban neighborhoods like Westchester County, NY, and nearby cities like Jersey City, NJ, and Stamford, CT. This position offers a dynamic, fast-paced work environment where you will be responsible for independently completing up to 5 residential installations per day. As an Installer, it is essential to be comfortable and willing to utilize public transportation to commute to and from appointments within New York City and the surrounding areas. At this time, Honest Networks does not offer visa sponsorship or work authorization assistance. Responsibilities: Install networking equipment in customers' apartments, ensuring proper setup and configuration. Monitor network performance and promptly address and resolve connectivity issues to maintain optimal service. Provide knowledgeable guidance to customers on optimizing network performance and resolving basic connectivity issues or concerns. Ensure excellent customer service by addressing concerns promptly and professionally. Collaborate with Honest's management and staff to resolve complex networking issues promptly. Maintain accurate records of troubleshooting activities, including detailed problem descriptions, actions taken, and resolutions implemented. Manage appointment calendar and meet scheduled appointment windows. Requirements 1-3 years of experience with fiber-optic installation, low-voltage wiring, splicing, or network maintenance Ability to conduct fusion and mechanical splicing of fiber strands Use OTDR and VFL to test and certify fiber lines Bonus: Is comfortable with fusion splicing Comfortable using mass transit to commute during the day while traveling to and from appointments Ability to read, understand, and communicate in English Ability to work independently and collaboratively in a fast-paced environment Exceptional attention to detail and organizational abilities Excellent communication and interpersonal skills for effective customer interaction Familiarity working with hand and power tools Capable of lifting up to 55 lbs. Ability to work in all weather conditions year-round Willing to adopt a flexible work schedule Comfortable working in confined spaces Basic computer skills are required. Authorized to work in the U.S. Ability to pass a background check and drug screening Benefits Attractive salary (estimate of $27-36/hr) based on level of capabilities and experience Performance bonus potential Paid-time off (PTO) Medical, vision, and dental benefits Metro card reimbursement Honest Networks' Values Honest is committed to providing equal employment opportunities to all individuals. We value diversity and do not discriminate based on race, color, ethnicity, age, gender identity and expression, sexual orientation, religion, national origin, socioeconomic status, disability, veteran status, or any other legally protected characteristic. We offer reasonable accommodations to applicants with disabilities upon request to facilitate their participation in the hiring process.

This is a Computer Field Technician Position doing hardware repairs and installations on laptop and desktop units. You must have prior experience with laptop and desktop hardware. As part of your onboarding, you will be certified in Dell and Lenovo. All certifications are free to you. Job Details This is a 1099 Contract position. Call volume varies but is typically between 2-5 calls per day. Pay is based on the number of calls completed. Pay starts at $35 per ticket. You will be completing hardware part replacements for Dell and Lenovo warranty services. Pay period -every Friday after the first week of completing tickets. You must have a reliable form of transportation to run these calls. You must have access to a computer and the internet to log onto your portal. Tickets are run Monday through Friday. You must be able to log into your tech portal every workday by 9 am to accept, code (update status), and map out your calls. You will be responsible for contacting your customers and confirming a window to go onsite to complete the service. Parts will be provided for you by the manufacturers. They are typically held at FedEx for you to pick up in the morning. You will be provided with shipping labels and materials to return the removed parts.

Network Cabling Technician Department: Engineering Division: Corporate Reports to: Dallas Munday Job Status: Full-Time Work Shift: 8:30 AM - 5:30 PM Join a Team Where Your Work Powers the Technology Behind the World's Most Essential Industries. BlackHawk Data is looking for a driven, hands-on Network Cabling Technician who takes pride in building clean, reliable, and high-performing network environments. As one of the fastest-growing woman-owned IT solution providers in the country, BlackHawk Data gives you more than a job we give you a career with purpose. At BHD, curiosity fuels our innovation, collaboration defines our culture, and grit drives our success. We invest in our people, challenge them to grow, and celebrate the wins together. If you're someone who loves rolling up your sleeves, solving real world technical problems, and delivering work you can stand behind, you'll feel right at home here. In this role, you'll be on the front lines of building the infrastructure that keeps hospitals, utilities, public agencies, and major enterprises connected. You'll work closely with senior engineers to install, organize, and support the physical and technical components that form the backbone of modern networks. Your work won't just support business operations it will help enable secure, mission-critical environments where performance matters. If you're passionate about working with your hands, growing your skills, and making an impact you can see and touch every day, BlackHawk Data is where you belong. About the Role We are looking for a Network Cabling Technician to support equipment installation, network setup, structured cabling, and onsite deployment activities. This role works closely with senior engineers to ensure clean, professional installations of customer network environments, including hardware setup, cable routing, testing, troubleshooting, and network administration support. Key Responsibilities: Cabling, Infrastructure & Physical Installation Perform cable installation including Cat5e/6/6A runs, labeling, termination, and testing. Install and manage fiber optic cable connections, ensuring proper handling, routing, and polishing/termination where required. Complete racking and stacking of equipment including switches, firewalls, servers, patch panels, and related hardware. Build and organize network racks, ensuring proper cable management, airflow, and accessibility. Support voice over IP (VoIP) setups including handset installation, wiring, and testing. Ensure all cabling meets industry standards and project specifications. Network Installation & Administration Assist with network installation, including mounting equipment, running cables, connecting devices, and validating connectivity. Work with networking platforms including Cisco, Fortinet, Meraki, Arista, and others during deployment and troubleshooting. Participate in customer deployments and provide onsite technical support. Support & Troubleshooting Provide Day 2 customer support for installed environments to ensure consistency and reliability. Collaborate with the Help Desk on advanced technical issues related to networking, cabling, and equipment function. Troubleshoot issues related to cabling, connectivity, hardware placement, VoIP, or device configuration. Project Documentation & Coordination Document all cabling, rack layouts, network changes, and installed equipment. Attend customer meetings as needed to support project scoping and requirements gathering. Coordinate with senior engineers to ensure solutions align with company standards before working with clients. Team Collaboration & Training Support junior technicians as needed on installation tasks and cabling best practices. Pursue ongoing certifications and training. Collaborate with other engineers on project assignments and technical oversight tasks. Required Qualifications 3-5 years of experience in network cabling, infrastructure installation, or field technician roles. Hands-on experience with: Cable installation Fiber optic cable handling Rack building Racking and stacking equipment VoIP hardware setup Basic network administration tasks Familiarity with networking vendors such as Cisco, Fortinet, Meraki, or similar. Strong understanding of structured cabling standards and testing procedures. Ability to troubleshoot wiring, connectivity, and hardware issues. Strong customer communication skills during onsite work. Preferred and Nice to Have Qualifications: Nice to Have: Certifications, such as Network+, CCNA, Fortinet NSE, or cabling-specific credentials. Nice to Have: Experience with MSP or multi-site deployment environments. Preferred Advanced understanding of structured wiring standards and testing equipment. Physical & Travel Requirements Ability to lift up to 50 lbs. and work on ladders, lifts, and in network closets. Travel to various customer sites as needed. Success in This Role Looks Like Clean, well-organized racks and cabling runs. Accurate and reliable installation of network and VoIP equipment. Strong teamwork with senior engineers and field staff. High customer satisfaction during and after deployments. What We Offer Competitive Pay. Up to 22 days of PTO. Comprehensive health, dental, vision, and 401(k). Regular coaching, career development, and advancement path. A collaborative culture that celebrates learning, innovation, and high performance *Job may require shifts of travel/nights and weekend hours *Changing business conditions may trigger modifications to job responsibilities [ i.e., COVID 19 ] * List is not comprehensive; other tasks may be required which are not listed * Job Description is not an employment contract; additionally, this document does not change your at-will status

Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Morris Great Lakes a division of the Morris Group, Inc, supplies CNC machine tools, tooling, accessories, software, automation, and more to manufacturers of precision machined parts. Our customer base is located in western New York, western Pennsylvania and West Virginia. Our mission is to help manufacturers from all industry sectors achieve and maintain a competitive advantage by improving productivity. Job Responsibilities The Field Service Technician will have an understanding of electrical, pneumatic, and hydraulic schematics to effectively detect and resolve issues with electrical and mechanical components. Duties include, but are not limited to: Daily travel from home to customer facilities with overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs. Install, commission, calibrate, maintain, address, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services. Demonstrate a willingness to help others and be a productive team member. Ensure accurate documentation is completed and connect with office management daily. Efficiently update the status of machine issues, repairs, and installations using the Salesforce Lightning Customer Support computer system. Maintain an in-depth knowledge of machine tool industry and product lines represented by the company. Promote and perform preventative maintenance and successfully diagnose and resolve CNC equipment issues to the customer's satisfaction. Job Requirements Minimum of one year of experience with a machine tool builder or distributor, a factory maintenance technician would also be considered. Proficient verbal and written communication and Customer relation skills. Able to interact and optimally communicate in person and over the phone with customer and co-workers. Present a professional image. Must be adaptable to changes and flexible when dealing with delays, or general work-related issues Basic digital literacy and understanding of MS Word, Excel, and Outlook. Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.). Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background, is a plus. Basic mechanical and logical solving skills and ability to read and interpret drawings and schematics are required. Rational decision making and problem-solving skills. Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. Other Functions: Perform related duties as required The duties listed above are intended only as an illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. Benefits: We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: Competitive starting salary Paid Time Off, starting with 23 paid days off in your first year. 10 Company Paid Holidays Comprehensive Health Benefits including, Medical, Vision, Dental and Life Insurance 401(k) retirement plan with company contribution Tuition reimbursement Employee appreciation events and perks Employee Assistance Program Mental and Physical Requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be highly mobile, able to access all areas of the premises. Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects. Ability to sit for prolonged period of times. Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees. Ability to frequently use hands and arms. Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Ability to keep their composure with the public and co-workers in everyday, stressful situations. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. Requisition #: 1433B, Somerset PA

Jr. Electrical Field Techs at our Eastview Service Center will be responsible for a variety of work tasks including but not limited to: Programming and repairing controllers for vacuum recloser switches (VRS), Installation & repair of control circuits for automatic transfer switches (ATS), step voltage regulators, and pole mounted capacitors. Additionally, Field techs will conduct high potential testing of aerial lift devices and reinforced fiber glass plastic tools along with conducting infrared inspections of overheard power lines. Required Education/Experience * High School Diploma/GED and 2 years relevant technical experience or * Associate's Degree In Electrical Technology or equivalent degree Preferred Education/Experience * Associate's Degree In Electrical Technology or equivalent degree Relevant Work Experience * Working knowledge of Basic AC and DC electrical power theory and circuit analysis, including 3 phase AC power systems. Required * Knowledgeable in mathematics and are able to learn to perform calculations involving basic trigonometry and vector analysis. Required * Experience with computer systems and must be able to use a computer to perform automated testing and prepare spreadsheets and technical reports. Required * Excellent oral and written communication skills and will be required to pass the PST Electrical Technician placement exam. Required * Able to perform testing, troubleshooting and repairs on protective relays and systems, overhead and underground switching and regulating devices, substation equipment, control systems and communication systems (SCADA - Supervisory Control And Data Acquisition) in substations and at other field locations. Preferred * Required to go through Bucket Truck Aerial and Ladder Line training and once trained, will be required to perform Storm Emergency restoration (Ladder Line) work, as needed. Preferred Licenses and Certifications * Driver's License Required Physical Demands * Ability to respond to system emergencies * Perform heavy manual labor, i.e. push, pull, and lift up to 50lbs * Ability to work in inclement weather and adverse conditions (i.e., excessive heat, cold, noise, confined spaces) * Ability to be approved to wear and use either a full or half-face respirator and self-contained breathing apparatus (SCBA), without facial hair or other conditions that may interfere with the seal, in accordance with OSHA regulations * Stand, walk, lift, climb, bend, kneel, stoop, and/or reach for the duration of the workday * Wear necessary Personal Protective Equipment (PPE), i.e. fire-retardant clothing and safety harnesses * Work rotating shifts, including nights, midnights, weekends, and holidays * Work with equipment with a manufacturer weight rating of 350lbs * Use equipment with a maximum weight rating of 375lbs when wearing and/or carrying 25lbs of clothing and equipment Additional Physical Demands * Must be able to respond to Company emergencies by performing a System Emergency Assignment to restore service to our customers. Core Responsibilities * Program and repair controllers for vacuum recloser switches (VRS). * Install and repair control circuits for automatic transfer switches (ATS). * Install and repair step voltage regulators. * Install and repair pole mounted capacitors. * Conduct high potential testing of aerial lift devices and reinforced fiber glass plastic tools. * Conduct infrared inspections of overhead power lines.

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military

The Jay and Patty Baker School of Business and Technology seeks a dedicated full-time faculty member in marketing with expertise in public relations and a forward-thinking approach to education within a dynamic and creative academic environment. The ideal candidate will bring advanced knowledge in public relations strategy, media relations, campaign development, reputation management, and crisis communication. The successful candidate will demonstrate the ability to guide students in applied learning, integrating strategic planning, creative execution, and data-driven analysis within a public relations context. Teaching responsibilities include courses in advertising, public relations, strategic communications, and integrated marketing. The new faculty member will seek to develop new or existing partnerships with agencies to incorporate real-world public relations practice into course activities. Beyond the classroom, the new faculty member will play an integral role in supporting the school and department's strategic initiatives, developing and enhancing curriculum to bring innovative learning experiences into the classroom. Additional responsibilities include advising and mentoring students, promoting the academic program, cultivating strategic partnerships with alumni, industry leaders, and other academic institutions. The new faculty member will serve on department, school, and college-wide committees, support accreditation, and participate in administrative duties and special projects as required. Specific competencies sought as related to the position: Globalism * Understanding of the global nature of the marketing communications industry. * Show awareness of professional, ethical, and social responsibility. * Respect for all groups, integrating this respect into teaching. * Embrace sustainability as a key aspect of the teaching experience. Instructional Design * Combine business practices with classroom learning for a rigorous academic experience. * Develop a variety of assessment methods to accommodate various learning styles. * Maintain industry connections to introduce new methodologies into the curriculum. * Use the college's learning management system to assess monitoring and reporting. * Create collaborative, real-world problem-solving experiences. * Incorporate various instructional methods to service students of different backgrounds and abilities. Learning Enrichment * Inspire student's interest, curiosity, creativity, and love of learning.. * Use various instructional methods to foster critical thinking, design thinking, creative problem-solving and team-building skills. * Integrate interdisciplinary learning into the curriculum. * Stay current with industry trends and technology, incorporating them into the curriculum. * Embrace new pedagogy forms, including online teaching, blended classes, workshops, flipped classrooms, and experiential learning. * Support student learning styles and abilities. Professionalism * Engage in industry-related activities to enhance the discipline. * Participate in relevant industry conferences. * Maintain a network of alumni and industry experts for internships, mentorship, curriculum development, guest speaking engagements, and graduate placement. * Stay current and engaged in the primary teaching discipline. * Model professional behavior to prepare students for related industry fields. Technology * Utilize course management systems and multimedia technology in the classroom. * Demonstrate effective use of industry-specific technology. * Use appropriate technology to communicate with and engage students outside the classroom. The preceding description is not designed to be a complete list of all duties and responsibilities required of the position; other duties may be assigned consistent with the classification of the position. Requirements: Minimum Qualifications: * Master's degree in Advertising, Public Relations, Marketing Communications, Strategic Communications, or a closely related field. * Ten years of professional leadership experience in advertising and marketing or public relations. Preferred Qualifications: * Terminal degree (e.g., Ph.D., D.B.A., Ed.D.) in a related field. * Teaching experience at the college or university level in Public Relations, Corporate Communications, Media Relations, or Crisis Management. * Experience with analytics, SEO/SEM, media metrics, or digital engagement tools. * Active participation in professional organizations such as PRSA, AMA, AAF, or IABC. Additional Information: Please note, all offers of employment are contingent upon successful completion of the background check process. Salary The final starting salary and appointment rank will be based on education level and cumulative experience; Collective Bargaining Agreement (CBA) Salary Schedules pgs. 73-74. Instructor: $69,346.37 - $80,793.82 Assistant Professor: $80,736.40 - $118,984.88 Associate Professor: $94,498.31 - $142,271.78 Professor: $115,232.32 - $173,403.37 The College reserves the right to select one or more candidates after having been duly reviewed and presented to the President in conformance with the provisions of Article 15 of the Collective Bargaining Agreement. Benefits The Fashion Institute of Technology (FIT) provides comprehensive employee benefit programs designed to help keep our faculty and staff and their families healthy, safe, happy, and productive. Our programs also include a variety of components to help our employees improve the quality and balance of their work and family lives, and to help them prepare for their futures. * Retirement Plans * Health Care Plan and Dental Plan * Employee Assistance Program * Flexible Spending Account * Commuter Benefit Plan * FIT Tuition Exemption Program * Qualifying Employer for the Public Service Loan Forgiveness (PSLF) Program For a full list of FIT benefits, visit our benefits webpage. Pay Equity by State Employers Pursuant to Executive Order 161, no State entity, as defined by the Executive Order, is permitted to ask, or mandate, in any form, that an applicant for employment provide his or her current compensation, or any prior compensation history, until such time as the applicant is extended a conditional offer of employment with compensation. If such information has been requested from you before such time, please contact the Governor's Office of Employee Relations at ************** or via email at ****************. Visa Sponsorship This position may be eligible for visa sponsorship. For any employees who may require sponsorship in order to lawfully work in the United States, FIT reserves complete discretion whether to pursue such sponsorship or to cancel, discontinue, or withdraw such sponsorship at any time. Equal Employment Opportunity (EEO) Statement FIT is firmly committed to creating an environment that will attract and retain people from a range of backgrounds. FIT is firmly committed to creating a learning and working environment that encourages, utilizes, respects, and appreciates the full expression of every individual's ability. The FIT community fosters its mission and grows because of its rich, pluralistic experience. FIT is committed to prohibiting discrimination, whether on the basis of race, color, creed, age, national origin, immigration or citizenship status, gender, sexual orientation, disability, marital status, partnership status, caregiver status, sexual and reproductive health decisions, uniformed service, height, weight, any lawful source of income, status as a victim of domestic violence or as a victim of sex offenses or stalking, whether children are, may be or would be residing with a person or conviction or arrest record, or any other characteristic protected by applicable federal, state, or local laws. FIT is committed to providing equal opportunity in employment, including the opportunity for upward mobility for all qualified individuals. Applications from veterans and persons with disabilities are encouraged. Inquiries regarding FIT's non-discrimination policies may be directed to the Chief Equal Employment Opportunity Officer/Title IX Coordinator, ************. Annual Security Report The safety and well-being of FIT's students, faculty, staff, and visitors is of paramount importance. Pursuant to the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act, FIT publishes an annual report containing crime statistics and statements of security policy, accessible here: Safety Statistics. A paper copy of the report will be provided upon request by contacting Public Safety's administrative office number at **************. Physical Requirements and Work Environment The working conditions for this position will be any combination of the classroom, lab, and/or office space. Certain roles may be required to handle machinery and chemicals. The physical requirement for this position will require occasional sitting, constant standing, occasional bending, frequent walking, and occasionally lifting 10 lbs. or less. Application Instructions: In order to be considered for this position, please submit the following documents online: * Letter of interest clearly indicating your qualifications for the position * Curriculum Vitae * Teaching Philosophy Statement * Research Philosophy Statement * Unofficial Transcript* * A minimum of three professional references, including names, titles, addresses, phone numbers, and e-mail contact information * A list of three references for recommendation letters; references may be contacted at a later stage * Official transcripts are required within the first 30 days of hire. Applicants with foreign degrees must submit a completed credential evaluation comparing their foreign academic accomplishments to standards in the U.S. Returning Applicants - Login to your FITNYC Careers Account to check your submitted application materials. This is a full-time, tenure-track position beginning in Fall 2026. Review of applications will commence in September 2025 and continue until the position is filled. Please note that due to the high volume of applications we receive, we are unable to contact each applicant individually regarding his or her application status. Additional information about the Fashion Institute of Technology can be found at: **********************

Requirements Required: 1-2 years of structured cabling, data-communications wiring, or low-voltage installation experience Proficient with Cat 5e, Cat 6, and/or fiber-optic termination and testing Skilled at cable management, labeling, and documentation Confident using hand and power tools safely Comfortable working on ladders, lifts, and in tight spaces Reliable transportation and a valid driver's license Preferred: BICSI Installer or equivalent certification. Experience with coaxial cable, AV cabling, or security/access control wiring. Knowledge of PoE and network device installation. Physical Requirements Lift and carry up to 50 lbs Stand, bend, kneel, and reach for extended periods Flexible to travel to job sites across PA and NJ Work Perks We believe a great technician deserves great rewards: Competitive compensation (above industry average in Bucks County-let's talk specifics) Paid Time Off: generous vacation, plus holiday and floating time off Performance Bonuses: based on individual and company outcomes Flexible, Top-Tier Health Coverage: medical, dental, and vision plans 401(k) with Employer Match - a smart move for your future Life & Disability Insurance: tailored to fit your needs Certification Sponsorship: we'll fully reimburse approved professional development that helps you grow Magna5 Values Win Together - We collaborate with clients and across the Magna5 team to provide complete solutions for every IT challenge. Respond Fast - When clients or teammates reach out, we answer with urgency, assembling the needed expertise to provide quick and accurate resolutions. Earn Trust - We strive to earn and keep the trust of our clients and teammates through our actions every day, fulfilling every promise we make. Stay Transparent - No secrets and no surprises. We respect our clients and one another by providing candid assessments and complete, accessible information. Think Ahead - “Good enough” isn't good enough. We strive to be the best. Our team members are proactive with our problem solving and work to stay on the leading edge of new technologies that drive client success. What We DoMagna5 is a rapidly growing IT Managed Service Provider delivering cybersecurity, private and public cloud hosting, backup and disaster recovery and other advanced services from mid-market to enterprise customers nationwide, including leaders within the education, healthcare, government, financial services, manufacturing, and other industry segments. We integrate advancements in technology and processes to drive businesses forward. As a trusted managed services provider, we bring together the right mix of managed IT services, security, and network connectivity, fully managed by our team of experts 24/7/365. Our passion is to help companies function better, faster, and smarter. We offer an exciting and collaborative environment, with growth potential. For more information, visit our website at ***************

Network & Cabling Technician Network Cabling Technician Department: Engineering Division: Corporate Reports to: Dallas Munday Job Status: Full-Time Work Shift: 8:30 AM - 5:30 PM Join a Team Where Your Work Powers the Technology Behind the World's Most Essential Industries. BlackHawk Data is looking for a driven, hands-on Network Cabling Technician who takes pride in building clean, reliable, and high-performing network environments. As one of the fastest-growing woman-owned IT solution providers in the country, BlackHawk Data gives you more than a job we give you a career with purpose. At BHD, curiosity fuels our innovation, collaboration defines our culture, and grit drives our success. We invest in our people, challenge them to grow, and celebrate the wins together. If you're someone who loves rolling up your sleeves, solving real world technical problems, and delivering work you can stand behind, you'll feel right at home here. In this role, you'll be on the front lines of building the infrastructure that keeps hospitals, utilities, public agencies, and major enterprises connected. You'll work closely with senior engineers to install, organize, and support the physical and technical components that form the backbone of modern networks. Your work won't just support business operations it will help enable secure, mission-critical environments where performance matters. If you're passionate about working with your hands, growing your skills, and making an impact you can see and touch every day, BlackHawk Data is where you belong. About the Role We are looking for a Network Cabling Technician to support equipment installation, network setup, structured cabling, and onsite deployment activities. This role works closely with senior engineers to ensure clean, professional installations of customer network environments, including hardware setup, cable routing, testing, troubleshooting, and network administration support. Key Responsibilities: Cabling, Infrastructure & Physical Installation Perform cable installation including Cat5e/6/6A runs, labeling, termination, and testing. Install and manage fiber optic cable connections, ensuring proper handling, routing, and polishing/termination where required. Complete racking and stacking of equipment including switches, firewalls, servers, patch panels, and related hardware. Build and organize network racks, ensuring proper cable management, airflow, and accessibility. Support voice over IP (VoIP) setups including handset installation, wiring, and testing. Ensure all cabling meets industry standards and project specifications. Network Installation & Administration Assist with network installation, including mounting equipment, running cables, connecting devices, and validating connectivity. Work with networking platforms including Cisco, Fortinet, Meraki, Arista, and others during deployment and troubleshooting. Participate in customer deployments and provide onsite technical support. Support & Troubleshooting Provide Day 2 customer support for installed environments to ensure consistency and reliability. Collaborate with the Help Desk on advanced technical issues related to networking, cabling, and equipment function. Troubleshoot issues related to cabling, connectivity, hardware placement, VoIP, or device configuration. Project Documentation & Coordination Document all cabling, rack layouts, network changes, and installed equipment. Attend customer meetings as needed to support project scoping and requirements gathering. Coordinate with senior engineers to ensure solutions align with company standards before working with clients. Team Collaboration & Training Support junior technicians as needed on installation tasks and cabling best practices. Pursue ongoing certifications and training. Collaborate with other engineers on project assignments and technical oversight tasks. Required Qualifications 3-5 years of experience in network cabling, infrastructure installation, or field technician roles. Hands-on experience with: Cable installation Fiber optic cable handling Rack building Racking and stacking equipment VoIP hardware setup Basic network administration tasks Familiarity with networking vendors such as Cisco, Fortinet, Meraki, or similar. Strong understanding of structured cabling standards and testing procedures. Ability to troubleshoot wiring, connectivity, and hardware issues. Strong customer communication skills during onsite work. Preferred and Nice to Have Qualifications: Nice to Have: Certifications, such as Network+, CCNA, Fortinet NSE, or cabling-specific credentials. Nice to Have: Experience with MSP or multi-site deployment environments. Preferred Advanced understanding of structured wiring standards and testing equipment. Physical & Travel Requirements Ability to lift up to 50 lbs. and work on ladders, lifts, and in network closets. Travel to various customer sites as needed. Success in This Role Looks Like Clean, well-organized racks and cabling runs. Accurate and reliable installation of network and VoIP equipment. Strong teamwork with senior engineers and field staff. High customer satisfaction during and after deployments. What We Offer Competitive Pay. Up to 22 days of PTO. Comprehensive health, dental, vision, and 401(k). Regular coaching, career development, and advancement path. A collaborative culture that celebrates learning, innovation, and high performance *Job may require shifts of travel/nights and weekend hours *Changing business conditions may trigger modifications to job responsibilities [ i.e., COVID 19 ] * List is not comprehensive; other tasks may be required which are not listed * Job Description is not an employment contract; additionally, this document does not change your at-will status Powered by JazzHR om M3xKaX5K

Job DescriptionBenefits: Company car Competitive salary Flexible schedule Free uniforms Paid time off Profit sharing Training & development We are seeking Cable Technicians to become an integral part of our team! Team members will service and install broadband data, voice and video systems as well as identify areas of improvement to increase efficiency. Responsibilities: Installation and repair of broadband data, video and voice systems Install and service data, video and voice configurations to minimize communication disruptions Provide training and support to telecommunications personnel Investigate customer issues and design appropriate solutions Order and maintain inventory stock supplies Maintain all company assets safeguarded Qualifications: Previous experience in telecommunications, electrical engineering, or other related fields Familiarity with telecommunications equipment Strong analytical and critical thinking skills Strong attention to detail Excellent written and verbal communication skills Customer service skills

We are seeking mid-level IT Field Engineers to join our team on a freelance or contract basis. The role is based in major cities across the United States. The ideal candidate will work on troubleshooting and maintaining IT systems as part of EIL Global's commitment to delivering exceptional IT solutions. Qualifications and Skills Strong expertise in Windows OS troubleshooting, network configuration, and hardware diagnostics and repair (Mandatory skill). Hands-on experience with Active Directory management, enabling seamless authentication and access management across networked environments. CCNA certification or equivalent knowledge, ensuring a solid understanding of networking concepts and protocols. CompTIA certification with proven ability to diagnose and address a range of technology-related issues efficiently. Proactive problem-solving skills and the capability to handle and resolve technical challenges independently. Excellent communication skills, facilitating effective interaction with clients to address needs and provide clear technical support. Capability to work in a fast-paced, dynamic environment while maintaining high levels of efficiency and attention to detail. Commitment to adhering to best practices and innovative approaches to maximize IT performance and security. Roles and Responsibilities Conduct on-site troubleshooting, repairs, and maintenance for IT systems, ensuring minimal downtime and optimal performance. Collaborate with clients to assess needs and provide customized IT solutions aligned with their business objectives. Configure and support network infrastructure components, aiding in the seamless integration of technological resources. Document and report on system errors, repairs, and planned upgrades to maintain effective communication with the team and clients. Perform regular system checks and updates to protect against vulnerabilities and ensure robust cybersecurity defenses. Assist in deploying new hardware and software solutions, ensuring they integrate smoothly with existing systems. Provide technical guidance and training to clients to empower them with the skills to manage their IT infrastructure. Stay updated with the latest technology trends and innovations to continuously improve service delivery.

About Honest Networks Honest Networks is dedicated to delivering high-quality and affordable internet service as a catalyst for community growth, fostering learning, creativity, and enjoyment. We are a rapidly expanding, venture-backed internet service provider headquartered in Manhattan. We focus on offering gigabit internet service at transparent and affordable prices, all while providing exceptional customer service. We achieve this goal by employing individuals with high integrity, a strong work ethic, and a passion for continuous learning. If working in a fast-paced, results-oriented, and mission-driven environment excites you, we encourage you to apply and join our team. Learn more at *************** About the Role * Honest Networks is seeking Field Technician Installers who are enthusiastic about expanding our internet network services! As an Installer, your primary responsibility will be installing equipment, terminating connections, conducting tests, and troubleshooting various cabling for our residential customers. We cover metro regions in New York City, suburban neighborhoods like Westchester County, NY, and nearby cities like Jersey City, NJ, and Stamford, CT. * This position offers a dynamic, fast-paced work environment where you will be responsible for independently completing up to 5 residential installations per day. As an Installer, it is essential to be comfortable and willing to utilize public transportation to commute to and from appointments within New York City and the surrounding areas. * At this time, Honest Networks does not offer visa sponsorship or work authorization assistance. * Responsibilities: * Install networking equipment in customers' apartments, ensuring proper setup and configuration. * Monitor network performance and promptly address and resolve connectivity issues to maintain optimal service. * Provide knowledgeable guidance to customers on optimizing network performance and resolving basic connectivity issues or concerns. * Ensure excellent customer service by addressing concerns promptly and professionally. * Collaborate with Honest's management and staff to resolve complex networking issues promptly. * Maintain accurate records of troubleshooting activities, including detailed problem descriptions, actions taken, and resolutions implemented. * Manage appointment calendar and meet scheduled appointment windows.

Jr. Electrical Field Techs at our Eastview Service Center will be responsible for a variety of work tasks including but not limited to: Programming and repairing controllers for vacuum recloser switches (VRS), Installation & repair of control circuits for automatic transfer switches (ATS), step voltage regulators, and pole mounted capacitors. Additionally, Field techs will conduct high potential testing of aerial lift devices and reinforced fiber glass plastic tools along with conducting infrared inspections of overheard power lines. Required Education/Experience High School Diploma/GED and 2 years relevant technical experience or Associate's Degree In Electrical Technology or equivalent degree Preferred Education/Experience Associate's Degree In Electrical Technology or equivalent degree Relevant Work Experience Working knowledge of Basic AC and DC electrical power theory and circuit analysis, including 3 phase AC power systems. Required Knowledgeable in mathematics and are able to learn to perform calculations involving basic trigonometry and vector analysis. Required Experience with computer systems and must be able to use a computer to perform automated testing and prepare spreadsheets and technical reports. Required Excellent oral and written communication skills and will be required to pass the PST Electrical Technician placement exam. Required Able to perform testing, troubleshooting and repairs on protective relays and systems, overhead and underground switching and regulating devices, substation equipment, control systems and communication systems (SCADA - Supervisory Control And Data Acquisition) in substations and at other field locations. Preferred Required to go through Bucket Truck Aerial and Ladder Line training and once trained, will be required to perform Storm Emergency restoration (Ladder Line) work, as needed. Preferred Licenses and Certifications Driver's License Required Physical Demands Ability to respond to system emergencies Perform heavy manual labor, i.e. push, pull, and lift up to 50lbs Ability to work in inclement weather and adverse conditions (i.e., excessive heat, cold, noise, confined spaces) Ability to be approved to wear and use either a full or half-face respirator and self-contained breathing apparatus (SCBA), without facial hair or other conditions that may interfere with the seal, in accordance with OSHA regulations Stand, walk, lift, climb, bend, kneel, stoop, and/or reach for the duration of the workday Wear necessary Personal Protective Equipment (PPE), i.e. fire-retardant clothing and safety harnesses Work rotating shifts, including nights, midnights, weekends, and holidays Work with equipment with a manufacturer weight rating of 350lbs Use equipment with a maximum weight rating of 375lbs when wearing and/or carrying 25lbs of clothing and equipment Additional Physical Demands Must be able to respond to Company emergencies by performing a System Emergency Assignment to restore service to our customers. Core Responsibilities Program and repair controllers for vacuum recloser switches (VRS). Install and repair control circuits for automatic transfer switches (ATS). Install and repair step voltage regulators. Install and repair pole mounted capacitors. Conduct high potential testing of aerial lift devices and reinforced fiber glass plastic tools. Conduct infrared inspections of overhead power lines.

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military