Field technician engineer full time jobs

Title: Field Service Engineer Location: Columbus, OH Pay Rate: $35-$45/hour + mileage reimbursement + 5% bonus (based on location, experience, education, and skill level) Schedule: Always on-call (nights, weekends, holidays) Hours: 40-50 hours per week on average Travel: 100% regional travel required Vehicle: Must use personal vehicle Overtime: Paid at 1.5x Company credit card provided for gas, parking, meals, and job-related expenses Requirements 3-5 years of electrical experience, including high-voltage work Strong troubleshooting and technical skills Excellent client communication and customer service abilities Must be reliable, flexible, and comfortable working on-call What You'll Do Perform installation supervision, testing, commissioning, maintenance, and repair of low-voltage distribution gear, transformers, and related power equipment Prepare technical reports, test sheets, and track tools, spare parts, and consumables Follow safety regulations for both company standards and customer sites Attend onsite meetings and coordinate with Project Management teams Communicate regularly with Project Managers to share updates and escalate needs Deliver high-quality customer service and represent the company professionally Identify opportunities to improve processes and reduce waste Comply with all company policies, procedures, and safety requirements Perform additional duties as needed What You Bring Associate degree in Electrical Power Distribution or 5+ years of relevant field service experience Military experience preferred Data center or mission-critical system experience a plus Hands-on experience with: - Electrical power distribution systems - Power monitoring systems - AC/DC electrical power - Communication protocols 3-5 years experience with low-voltage switchgear or power distribution equipment (preferred) Knowledge of UL standards (UL67, UL1008, UL1008S, UL60950, UL891, UL1558, etc.) Ability to read electrical schematics Ability to use electrical test equipment (multimeters, current meters, etc.) What You'll Receive Medical, dental & vision insurance Life insurance Short-term & long-term disability Matching 401(k) Vacation & paid sick time Tuition reimbursement Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

The PDM Field Engineer I is based at a jobsite and is responsible for facilitating the interface between the jobsite and the home office engineering staff. When not assigned to a jobsite, the PDM Field Project Engineer I will be assigned to a Matrix engineering office to perform design and project engineering tasks in support of current projects. Essential Functions Actively supports the Company's commitment to safety and its “Core Values”. Represents the Company at all times with high moral standards while adhering to the Company's “Code of Business Conduct and Ethics”. Assists the construction team with the interpretation of engineering drawings, specifications, and other technical documents. Communicates and transfers engineering data to aid field staff and craft. Communicates and transfers field issues to engineering group to improve engineering deliverables for efficient fabrication, erection, installation and testing of pressure vessels, storage tanks, piping and equipment. Participates in constructability and model reviews. Documents and assists in the resolution of technical issues that arise at the jobsite. Supports construction with RFI's from the Field to Engineering and assists in maintaining the RFI log. Observes the work being performed and coordinates with Engineering to address any deviations from the drawings and specifications. Assists the material receipt personnel by performing receipt inspections including coordination of non-conformance resolution with the cognizant Engineers and Procurement for incoming engineered equipment and components. Facilitates Engineering's review of rigging plans. Supports with pre-commissioning and commissioning activities. Supports in conducting and documenting facility performance tests when within the project scope. Supports the construction superintendent regarding construction planning requiring engineering interface. Coordinates site visit timing and requirements for engineering discipline EORs observations and sign-off. Works on special projects as assigned and directed by supervisor, the project engineer, or by the construction team. Travels to meetings with customers and vendors as required. Performs other responsibilities as required or assigned. Qualifications Bachelor's degree in Mechanical, Chemical, Civil/Structural, Electrical or other related discipline required. Entry-level Engineer; no experience required but field experience on construction project sites highly preferred. Strong communication skills, both written and oral, and good organizational skills. Ability to perform with minimal supervision. Ability to work on multiple activities at one time. Strong computer skills, including PowerPoint, Excel, and Word are required. Travel Requirements - assignments will be field positions at construction sites throughout North America with periodic stints in an office including a potential initial office assignment to learn the Matrix way. Physical Demands - Light physical effort required to sit or stand, reach, bend, and move about facility (including ladders and stairs). Follow us at Matrix PDM Engineering and Matrix Service Company to view all of our open positions and for the latest news about our operating companies and our teams. Full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance. At Matrix, we are dedicated to building a diverse, inclusive, and authentic workplace. We encourage all whose experience aligns with the listed qualifications to apply and explore joining our organization. EEO/M/F/Disability/Vets Employer We are an Equal Opportunity. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category. Applicants must be currently authorized to work in the United States on a full-time basis.

Title: Field Engineer Direct Hire / Full Time Our client, a leading construction firm in Columbus OH, has an immediate need for a Field Engineer. The Field Engineer is responsible for assisting in the planning, coordination, and execution of construction projects. This role requires hands-on field work, technical expertise, and excellent communication skills to collaborate with project managers, subcontractors, and field personnel to achieve project goals safely and efficiently. The Field Engineer plays a critical role in maintaining quality control, managing resources, and ensuring projects stay on schedule. The key responsibilities of the position are: • Assist the Project Manager and Site Superintendent in daily project coordination and planning. • Provide technical support to field operations, helping resolve design or construction issues. • Review construction drawings and specifications to ensure adherence to project plans. • Conduct field surveys and collect data to support project designs. • Implement quality control and safety standards throughout construction phases. • Monitor work on-site to ensure compliance with project standards, building codes, and specifications. • Inspect and test materials, equipment, and work to verify adherence to project requirements. Qualifications: • Bachelor's degree in Civil Engineering, Construction Management, or related field. • 1-3 years of experience in construction or field engineering, preferably in a similar role. • Proficiency in reading and interpreting blueprints, specifications, and other construction documents. • Strong understanding of safety protocols and best practices in the construction industry. • Knowledge of project scheduling and management software is a plus. • Excellent organizational, communication, and problem-solving skills. • Ability to work on-site, with occasional extended hours or weekend shifts, as needed.

We have an exciting opportunity for a technical Manufacturing Field Service Technician at a partner client headquartered in Las Vegas, Nevada. The Field Technician for this position should reside on the US east coast. This opportunity offers you the ability take part in the company's emergence on the international market, by travelling across the U.S.A and using your technical skills to resolve equipment issues at customer sites to get them back up and running at optimal performance while also having the chance to participate in different areas of the business. Salary: $25-35/hr Schedule: 40hr/week (Day shift preferred) Flexible schedule. Location: Hybrid/Remote - Candidate can reside anywhere in the USA but will be going to different customer sites across the USA to perform work. Language: English, (French or Spanish is a plus). Duties and Responsibilities: The ideal candidate for this role will be a self-starter who is not afraid of taking the lead to make the right decisions when faced with a variety of scenarios in order to get the customer sites up and running in a timely manner. Travel to customers' site to setup, repair equipment, and conduct service and training related tasks. Troubleshoot equipment, identify and resolve issues. Test equipment to ensure it performs in accordance with best practices and specifications. Evaluate equipment functionality and propose continuous improvements to appropriate team for review and future consideration. Analyze customers' requirements and specifications to ensure current equipment meets their needs and or if additional equipment is needed to meet production goals. Support customers (remotely, via phone, and in person) on the operation and troubleshooting of equipment. Solve and facilitate customer service issues as they arise. When not on the road, you will assist with machine assembly, machine testing, training, quality control, documentation and factory acceptance testing assistance, shop work, as well as customer demonstrations (Demo). Perform duties related to special projects as required. RequirementsEducation High school diploma or equivalent (Required). Work Experience & Technical Skills Requirement Be technically inclined from a mechanical, electrical and machine/equipment automation standpoint (Required). Manufacturing experience 7 years (Preferred). 5 years experience in assembly and/or service of industrial equipment. knowledge of line packaging or related equipment (Preferred). Have the ability to read engineering drawings. Skills with automation and IT equipment, PLC and HMI. Excellent communication skills. Field service report writing will be required. Have the ability to handle delicate customer situations in a customer friendly manner as you will be representing the company. Able to communicate the process and plan of action in a calm and polite manner. Able to manage and foster a positive customer relationship. Capable of clearly and concisely articulating situations back to head office in a timely manner for matters that require an approval prior to proceeding with a decision. Able to quickly think on your feet to come up with solutions and how you it will be implemented. Be open-minded to try new ideas for solutions with a positive attitude. Be meticulous, detail oriented and keep records of all actions performed during service calls both remote and onsite. Be resourceful when faced with new issues that have not been encountered before. Have the ability to troubleshoot effectively despite a stressful situation. Able to work with little guidance alone as well as in a team. Shows initiative, drive and willing to learn and grow with the company. Prior experience in conducting installation & servicing of machines Certificate & License Requirement A valid driver's license and the ability to travel without restrictions across USA. Valid passport and authorized to travel to Canada. Benefits What We Offer: Bonus compensation. Attractive benefits package (Health, Vision, Dental). PTO (Paid Time Off). A work environment where you're contributing to the growth of the organization on the international stage.

AUTOMATIC DOOR FIELD TECH: A CAREER FOR THOSE WITH BRAINS AND BRAWN Like to get your hands dirty at work, but still like to be spruced and looking professional in appearance? Enjoy lifting heavy junk, climbing ladders, and using tools, but still want to interact with customers with the finesse of a salesman? Get the best of blue collar and white collar work as an automatic door field service technician! WHAT DOES AN AUTOMATIC DOOR TECH DO? A typical day begins at our shop with a caffeine jolt, a restock of service vehicles, and assignment of daily service calls. Technicians then travel to 4-6 customer locations within our service area where they troubleshoot, diagnose, and make repairs. This involves selling parts, filling out paperwork to document the superb work being performed, and helpfully answering customer questions, providing technical support/customer education, and converting any grumpy customers into happy ones. Additional calls along a route may be added if they come in, so be prepared to call an audible. A day ends by driving directly home from your last call and putting your feet up. Also we don't just handle the old and broken, but we do shiny new doors too! Our door techs can have the fun of installing those new door systems as well. Variety is the spice of life for an automatic door tech. WHAT ARE THE JOB DEMANDS? Physical Rigor - lift 100lbs Intellectual Astuteness Social Adeptness Clean Driving Record Clean Background Check Clean Drug Test Must be able to work on-call emergency service rotation WHAT QUALITIES DO I NEED TO MEET THOSE DEMANDS? Experience in maintenance, repair, troubleshooting electro-mechanical equipment is required Expert level proficiency with hand and power tools Aptitude for troubleshooting Adapt to ever changing field schedule and environment; able to endure outdoor elements Discipline in procedures for safety, quality, and efficiency Attentive in all aspects of workmanship; includes repairs and documentation of work performed Consideration and courteousness to all persons encountered in the work day Helpful and responsive disposition Stamina to work fluctuating and long hours based on daily call schedule Mon-Fri Resourcefulness to find answers for equipment or applications you have not seen before Incredible communication that it timely and detailed Professional appearance WHAT DO YOU GET OUT OF IT? Satisfaction of doing an awesome job while you solve a customer's problem. A good night's sleep after working your butt off for a decent paycheck while opening doors to make the community more accessible. A chance to grow personally and professionally with a career at a company that offers a road to the future, not just a dead end. Work with company and co-workers who value quality and accountability in their performance. THE DEETS: This is a full time gig, with 50-60 hours a week. We pay top dollar for top performance! We have got that insurance thing covered - medical, dental, eye, life, short term disability We have that retirement deal with matching to combat that Peter Pan complex. We pay you to get lost a week or two out of the year….and on holidays too. We give you a set of wheels and duds to get the job done. BYO tools. We pass out some hi-tech gadgets for communicating. THE FINE PRINT: A confidentiality and non-compete agreement are required. Starting pay is commensurate with experience. $25-33/hr. after training/apprenticeship based on performance. Equal opportunity knocking at your door. Trinity Door Systems proudly maintains a drug and alcohol free workplace. *Want to know how to get your foot in the door? Include a cover letter with your resume! We read every single application, so stand out from the crowd. Helpful hint #2: Don't call us, we'll call you. We are pretty busy so we will contact those we wish to interview. Hint # 3 We work on automatic pedestrians entrances, not the garage doors. If someone drives a car through one of our doors, one of our techs is having a bad day! #zr

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Role Summary This position is for a hands-on Field Service Technician who will support Rivian vehicle repairs. The role requires a collaborative, team-oriented individual capable of working in a dynamic, fast-paced environment. While the role is based in a primary location, it may require operating remotely or traveling to various locations, including the production plant, to provide vehicle support as business needs demand. This job description outlines the full spectrum of skills required, and candidates will be assessed against this spectrum to determine the appropriate level for their expertise. Responsibilities Perform or assist with assigned vehicle diagnosis, repairs, installations, and inspections, whether at a service center or in the field directly at customer homes, businesses, or other convenient locations. Identify and explain the Rivian product line, EV framework, tools, and accessories. Utilize available technical resources to follow Rivian repair procedures efficiently without compromising quality or safety. Conduct road tests to ensure the quality of repairs. Manage necessary parts operations, including ordering, receiving, shipping, and inventory. Identify areas of improvement and provide feedback to senior technicians or leadership. Support service campaigns and containment initiatives. Ensure that all work and technical notes are properly documented for internal and external use. Work collaboratively with a team spirit and maintain high-quality work with minimal supervision. Communicate with a high level of professionalism in customer-facing situations. Stay current with technical skills and complete required training. This role may require regular interaction with customers and their families, 3rd party affiliates, and suppliers within Rivian facilities, on mobile service routes, or at community outreach events. Qualifications General Requirements: High School Diploma or GED is preferred. Proficient in using hand tools and power tools. Must be at least 21 years old. Must possess a valid driver's license and maintain a clean driving record, with no driving-related suspensions or revocations within a 3-5 year period. Ability to drive a non-commercial truck and trailer is preferred. Must be available for a 40-hour work week, which may include weekends, holidays, and shifts during early morning, evening, or overnight hours based on business needs. Proficient with laptops or computers in Windows or Mac environments. Strong organizational skills, attention to detail, and an eagerness to learn. Ability to perform physical tasks such as lifting up to 50 lbs., sitting, standing, walking, and frequent use of hands for grasping tools and data entry. Physical exertion may be required to perform occupational tasks (sitting, standing, walking, bending, kneeling, carrying, reaching, pushing, pulling, and lifting up to 50 lbs.). Ability to read and speak fluent English. Ability to see, read and interpret documents such as governmental regulations, safety rules, operating and maintenance instructions or schematics. Experience: Hands-on work experience in an automotive shop is highly preferred. However, if you are a recent automotive graduate looking for your next opportunity, we encourage you to apply. This role is open to various levels of experience, from entry-level to career technicians A background in electric vehicle (EV) or hybrid repair is considered a plus. Experience in start-up environments is preferred. Experience with parts departments, billing, and work order management systems is preferred. Spectrum of Technical Skills Low Voltage & Electrical Systems: Technicians should have a foundational understanding of basic electricity theory and be able to safely use a DVOM for various circuit measurements. Proficiency should extend to reading and leveraging electrical schematics as a diagnostic resource. Advanced candidates will demonstrate a deep understanding of automotive electronics, including CAN and LIN networks, and possess the ability to diagnose complex faults and perform wiring repairs according to manufacturer standards. High Voltage Systems: A core requirement is understanding the risks involved with high voltage systems and the ability to safely power them down and work on them using appropriate personal protective equipment (PPE). This includes understanding the function of various high voltage components and their monitoring systems. Highly skilled technicians will be capable of diagnosing complex high voltage faults related to charging, isolation, and interlock loop issues using the manufacturer's diagnostic processes. Chassis, Brakes & Suspension: Technicians should be proficient in fundamental chassis service, including the ability to mount and balance tires, perform vehicle alignments, and replace brake system components. The role requires the ability to diagnose mechanical suspension components and progress to repairing advanced vehicle dynamic issues related to traction control, ABS, and power steering. Top-tier candidates will be adept at resolving complex drivability concerns such as Noise, Vibration, and Harshness (NVH). Thermal Systems: Technicians must be able to service vehicle thermal systems, starting with the ability to perform a coolant drain-and-fill and safely handle refrigerant with a 609 certification. A comprehensive understanding of the entire A/C system and its components is expected. An ideal candidate can proficiently use an A/C machine and diagnose a range of thermal system concerns, including issues with coolant systems, air conditioning performance, and HVAC systems. Advanced Driver Assistance Systems (ADAS): A working knowledge of ADAS is required, beginning with a basic understanding of the features and their operation. Technicians will be expected to replace system components and perform necessary calibrations. Advanced understanding includes knowing the functionality and limitations of the complete ADAS system and the specific roles of its various sensors. Body & Glass: The role includes responsibilities related to the vehicle body, from assisting with glass removal and installation to safely replacing windshields and other glued body fixtures. Technicians may be tasked with adjusting body panels to specified tolerances and should be capable of diagnosing and repairing issues such as wind noise and water leaks. Pay Disclosure Night shift times vary by location. Employees working night shifts will receive a 15% shift differential in addition to the base hourly pay. Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. General Requirements: High School Diploma or GED is preferred. Proficient in using hand tools and power tools. Must be at least 21 years old. Must possess a valid driver's license and maintain a clean driving record, with no driving-related suspensions or revocations within a 3-5 year period. Ability to drive a non-commercial truck and trailer is preferred. Must be available for a 40-hour work week, which may include weekends, holidays, and shifts during early morning, evening, or overnight hours based on business needs. Proficient with laptops or computers in Windows or Mac environments. Strong organizational skills, attention to detail, and an eagerness to learn. Ability to perform physical tasks such as lifting up to 50 lbs., sitting, standing, walking, and frequent use of hands for grasping tools and data entry. Physical exertion may be required to perform occupational tasks (sitting, standing, walking, bending, kneeling, carrying, reaching, pushing, pulling, and lifting up to 50 lbs.). Ability to read and speak fluent English. Ability to see, read and interpret documents such as governmental regulations, safety rules, operating and maintenance instructions or schematics. Experience: Hands-on work experience in an automotive shop is highly preferred. However, if you are a recent automotive graduate looking for your next opportunity, we encourage you to apply. This role is open to various levels of experience, from entry-level to career technicians A background in electric vehicle (EV) or hybrid repair is considered a plus. Experience in start-up environments is preferred. Experience with parts departments, billing, and work order management systems is preferred. Spectrum of Technical Skills Low Voltage & Electrical Systems: Technicians should have a foundational understanding of basic electricity theory and be able to safely use a DVOM for various circuit measurements. Proficiency should extend to reading and leveraging electrical schematics as a diagnostic resource. Advanced candidates will demonstrate a deep understanding of automotive electronics, including CAN and LIN networks, and possess the ability to diagnose complex faults and perform wiring repairs according to manufacturer standards. High Voltage Systems: A core requirement is understanding the risks involved with high voltage systems and the ability to safely power them down and work on them using appropriate personal protective equipment (PPE). This includes understanding the function of various high voltage components and their monitoring systems. Highly skilled technicians will be capable of diagnosing complex high voltage faults related to charging, isolation, and interlock loop issues using the manufacturer's diagnostic processes. Chassis, Brakes & Suspension: Technicians should be proficient in fundamental chassis service, including the ability to mount and balance tires, perform vehicle alignments, and replace brake system components. The role requires the ability to diagnose mechanical suspension components and progress to repairing advanced vehicle dynamic issues related to traction control, ABS, and power steering. Top-tier candidates will be adept at resolving complex drivability concerns such as Noise, Vibration, and Harshness (NVH). Thermal Systems: Technicians must be able to service vehicle thermal systems, starting with the ability to perform a coolant drain-and-fill and safely handle refrigerant with a 609 certification. A comprehensive understanding of the entire A/C system and its components is expected. An ideal candidate can proficiently use an A/C machine and diagnose a range of thermal system concerns, including issues with coolant systems, air conditioning performance, and HVAC systems. Advanced Driver Assistance Systems (ADAS): A working knowledge of ADAS is required, beginning with a basic understanding of the features and their operation. Technicians will be expected to replace system components and perform necessary calibrations. Advanced understanding includes knowing the functionality and limitations of the complete ADAS system and the specific roles of its various sensors. Body & Glass: The role includes responsibilities related to the vehicle body, from assisting with glass removal and installation to safely replacing windshields and other glued body fixtures. Technicians may be tasked with adjusting body panels to specified tolerances and should be capable of diagnosing and repairing issues such as wind noise and water leaks. Perform or assist with assigned vehicle diagnosis, repairs, installations, and inspections, whether at a service center or in the field directly at customer homes, businesses, or other convenient locations. Identify and explain the Rivian product line, EV framework, tools, and accessories. Utilize available technical resources to follow Rivian repair procedures efficiently without compromising quality or safety. Conduct road tests to ensure the quality of repairs. Manage necessary parts operations, including ordering, receiving, shipping, and inventory. Identify areas of improvement and provide feedback to senior technicians or leadership. Support service campaigns and containment initiatives. Ensure that all work and technical notes are properly documented for internal and external use. Work collaboratively with a team spirit and maintain high-quality work with minimal supervision. Communicate with a high level of professionalism in customer-facing situations. Stay current with technical skills and complete required training. This role may require regular interaction with customers and their families, 3rd party affiliates, and suppliers within Rivian facilities, on mobile service routes, or at community outreach events.

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: Arcadis is looking for a full-time Junior or Entry-Level BIM Technician to join our Water Design team. This hybrid role will be based out of our Columbus, OH location. The Junior or Entry-Level BIM Technician will be responsible for developing engineering drawings and models and preparing designs from general instruction and/or preliminary sketches, diagrams, or schematics prepared by Engineers or others. The ability of the Junior or Entry-Level BIM Technician to perform their own designs (Engineering) is preferred but not a requirement. Role Accountabilities We are looking for an junior/entry-level CAD/BIM Designer to join our team and support the creation of detailed project drawings, plans, and models for a variety of engineering projects. The role is responsible for Updating and creating drawings for site development, grading, utility piping layouts, process mechanical plans, and construction details using AutoCAD and Revit. You will work closely with engineers and designers to generate accurate, high-quality engineering drawings from provided redlines or design schematics. Responsible for producing floor plans, elevations, section cuts, and schedules in AutoCAD and Revit. You will also be tasked with maintaining site record drawings and ensuring that your work aligns with discipline-specific and company CAD/BIM standards. Meet project deadlines while maintaining quality and accuracy will be critical to the success of the projects you contribute to. Manage your workload throughout the entire project lifecycle, coordinating with local engineers and remote teams to ensure timely delivery of construction plans and related documents. The ideal candidate will demonstrate strong knowledge of CAD and BIM standards, with proven experience working with facility MEP system drawings, asset hierarchies, and associated O&M documents. Proficiency in the Microsoft Office Suite is required to efficiently manage project documentation and daily tasks. Excellent written and verbal communication skills are essential, as this role involves working collaboratively within a team environment and coordinating effectively with colleagues across multiple offices. Required Qualifications 0-2 years of experience working in CAD and BIM, with proficiency in both AutoCAD (2016 or newer) and Revit. High school diploma or equivalent plus up to 2 years of college/university level education in Engineering or similar, Preferred Qualifications A background in architecture, construction management, engineering, or a related field is preferred Experience working with remote teams will be a valuable asset. Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 15 days PTO that accrue per year. The salary range for this position is $20.65-$30.98 per hour. Actual salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location. #Resilience-ANA #Water-ANA #LI-RV1 #EarlyCareersANA

Full-time Description Bodor Laser is a professional manufacturer and exporter dedicated to the design, R&D and production of fiber laser machines that are widely used for cutting different metal materials. With 20 service languages, a knowledgeable sales and after-sales team, 24/7 service, and a worldwide market network covering more than 150 countries, Bodor reaches out to customers all over the world and looks forward to all potential partnerships. The company is committed to its responsibilities for the well-being of its staff and society, and aims to gain world recognition with intelligently Made-in-China and change human life with laser technology. With over 3000 global employees, BODOR is continuing to expand business world widely and is looking to hire technical service talents to be part of the technical service team of its U.S. subsidiary, Bodorlaser Inc.. The salary range for this position is broad because we are considering candidates with a wide range of experience levels, and the salary will be vary based on factors like location and industry-specific benchmarks. Summary: To support customers with Bodor Lasers. Responsible for offering technical advice to the customers and after-sales service in the field. Field Service Engineer Responsibilities: Serve as the main point of contact for customers, and provide direct support for laser machines through phone, email, chat and on-site visit. Assist personnel and customers with troubleshooting of the laser machine's mechanical and electrical problems, and take appropriate action to resolve customer issues. Track technical issues and incoming requests from customers. Manage schedule and follow up with customers in territory to ensure customer is optimizing the use of the lasers. Perform mechanical repair on laser machines at customer's location, and ability to determine if the repair will require special resources or parts. Understand layout drawings and blueprints in the installation of equipment. Develop and maintain a (replacement) parts list and ensure the parts are in stock by effectively communicating with relevant customers, staff, vendors and manufacturers. Identify safety issues on the machines. Provide customer trainings. Write and compose service reports and expense reports. Perform failure mode analyses and make upgrade recommendations. Assist with the final integration and commissioning of complex automation projects as needed. Assist with heavy mechanical moves, such as loading/unloading of equipment onto trucks as needed. Regular travel within assigned territories. Other duties as assigned. Requirements Field Service Engineer Preferred Qualifications: Bachelor's Degree in mechatronics, automation engineering, or electrical engineering from an accredited university.or equivalent with 2+ years' experience on automated CNC machines. Recent experience of installing, repairing, and diagnosing problems of automated CNC machines. 3+ years' related experience on automated CNC machines or fiber laser machines. Familiar with engineering software, such as SolidWorks, AutoCAD, etc. Able to read and interpret electrical and mechanical drawings and test equipment. Excellent verbal and written communication skills. Demonstrated technical writing skills Proficiency in Microsoft Word, Excel, and remote communications. Proficient at working independently and as part of a team in a fast-paced environment. Mandarin Chinese reading and speaking ability is a plus. Residing in the Ohio Area is preferred. Self-driven and responsible. Ability to work under pressure. Ability to travel as required (local and domestic). Ability to lift 50 lbs. Location: Our North American headquarters is located at Schaumburg, IL 60173. Houston Branch: 19416 Park Row, #120, Houston, TX 77084. Benefits & Perks: Competitive compensation package Company paid medical insurance Dental and vision insurance at low cost Company paid basic life, short- & long-term disability insurance 401(k) with employer match (20) days of paid time off, and (11) paid holidays per year FSA / HSA account Birthday gifts Holiday bonus Employee assistance program If interested in this outstanding opportunity, please submit your resume by responding to this job posting! BodorLaser is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. We conduct background checks and drug screen, in accordance with company policies and federal and state guidelines. Salary Description 70,000 starting

This is a full time benefits eligible position that includes a company vehicle, gas card for vehicle, inventory, and training. Paid training includes two certifications CCT Data Center and CCT Route/Switch, which comes with a dollar per hour increase. If you are technical, Acuative is willing to invest in you for this role. This position requires a person willing to go to new places. Tickets can be assigned for up to four hours away to provide installation and maintenance services to voice and data networks, servers, computer systems, retail technology systems, and other network-based hardware. Acuative technicians are guaranteed forty (40) hours of pay per week even if not dispatched for forty hours. To be eligible for this role you must have a clear driver's license (no more than 4 points), have the Covid-19 vaccination, and willing to work mostly M-F with opportunity for overtime and call out pay after hours. This position often works alone, and qualified applicants must be able to lift up to fifty pounds above head and climb a ladder. Selected candidates are given a full week of paid training and support as needed for every job they are routed to. Acuative is a drug free workplace. Overview: Acuative, the nation's leading independent provider of telecommunications field services, seeks a Field Service Technician. The successful candidate will spend the majority of their time covering the (MARKET) area providing installation and maintenance services to voice and data networks, servers, computer systems, retail technology systems, and other network based hardware. Primary Duties and Responsibilities The position involves a variety of tasks including but not limited to: · Installation and maintenance of networking hardware including routers, switches, and WAP's · Installation and maintenance of telephony equipment and circuits · Hardware break/fix support for Cisco UCS servers and Nexus switching equipment · Installation and support of retail technology systems - POS, Digital Signage, and Video Surveillance Systems · Circuit extensions and structured cabling · Site surveys and site audits · Maintain company vehicle, inventory, and tools to departmental standards · Accurately and timely submission of all job-related documents and deliverables Preferred Qualifications Candidates should possess many of the following KSAs: · Working knowledge of networking hardware and topologies · Familiarity with Cisco networking products and interfacing through Cisco CLI · Understanding of telephony systems (VOIP, PBX, Key Systems) with an ability to provide hands-on hardware and troubleshooting support · Knowledge of computing systems hardware with the ability to provide break/fix support for desktop PC and/or servers · Physical installations of a wide variety of hardware including routers, switches, WAPs, servers, POS systems, digital signage systems, and associated peripheral equipment · Ability to provide configuration support for a variety of technology platforms through console and remote applications · Experience with LEC circuit identification and extensions · Familiarity with cabling standards and the ability to pull and terminate cabling in a variety of customer environments · Ability to operate basic power tools - drills, saws, etc. · Work on ladders and lifts where required · Working knowledge of Microsoft Office applications (Excel & Word). · Ability to follow detailed job documents · Must be willing to travel within assigned region to meet customer SLAs · On-call, after hours, and weekend work may be required · Must possess a valid drivers' license with good driving record Education & Certifications: · Associates degree in Information Technology or equivalent experience · CompTIA, Cisco, Cabling, and PBX system certifications a plus! · Selected candidates will be required to attend a one week hardware training course at our Global Technology Center in Strongsville, OH · Selected candidates must obtain Cisco CCT Route/Switch and CCT Data Center certifications within 90 days of employment at Acuative

Brechbuhler Scales, Inc. | ******************* Columbus, OH | Full Time | $22 - $29/Hour| M-F, 7:30 AM - 4:00 PM We are looking for a highly motivated individual who has previous mechanical and/or electrical maintenance technician experience and wants to learn the scale industry. The ideal candidate will interact well with customers and be a team player. Never worked on Scales? Questions? Concerns? Learn about our training program and how it helped others just like you! ******************************************* Job Summary Typical workdays include team meetings, planning for each customer visit, and using company trucks/tools to service, calibrate, and repair a customer's weighing equipment. We provide service to a broad range of industrial customers, working both indoors and outdoors on equipment with attention to detail. When you join our team as a Field Service Scale Technician, you start out by completing a hands-on onboarding program focused on the fundamentals of the scale technician trade. In addition to completing the necessary training requirements, you also take part in a mentorship program while first working in the field. When you successfully complete all requirements of your onboarding program, you will become a Certified Scale Technician. From there, you may advance into more senior technician levels. There are also opportunities to evolve into other areas of the business, such as IT systems data networking, sales, or customer support. Job Requirements Successfully complete the scale technician onboarding program, which includes training/mentoring to learn: Fundamentals of the scale technician trade and our professional expectations. Scale products and mechanical/electrical components in the scale industry. How to use company vehicles, specialized equipment, and tools to service, calibrate and repair a customer's weighing equipment On-the-job skills to support our customers. Attend regular meetings with your manager and mentor to track learning progress. Maintain a clean and professional attitude and image. Complete and adhere to all assigned safety training. Obtain a Commercial Driver's License Class B (CDL B) Pass a final exam to advance to a Certified Scale Technician (CST). Minimum Qualifications Have or pursuing a CDL Class B (preferred) Experience with mechanical or electrical maintenance Highly motivated to learn a new trade. Positive work ethic and a customer-focused mindset. Team-oriented and willing to adapt to change. Ability to work indoors and outdoors in all types of weather conditions. Ability to follow all safety rules and wear proper safety equipment. Capable of performing duties that involve physical exertion such as lifting at least 50 pounds repetitively. Must have a valid driver's license and clean driving record. Knowledge of basic computer-related skills such as using the internet, mobile devices, and e-mail software. High school diploma or GED. About Us Founded in Canton, Ohio in 1929, Brechbuhler Scales, Inc. offers a comprehensive scale and balance product line from the world's finest scale manufacturers. We have grown over the years and have several branches across multiple states. Our highly trained sales professionals and service technicians provide customers with a single source for all weighing needs. B-TEK Scales, LLC. started in 1994 as the manufacturing arm to supply Brechbuhler Scales, Inc. Together, both companies are made up of 200+ employees. Compensation & Benefits Paid time off and holidays 401k Savings Plan with a 3% company contribution Medical, dental, vision, and other competitive supplemental benefits Opportunities for salary increases: Advance to next technician level, obtain CDL B Overtime begins after 8 hours each day, when available Double-time on Sundays or holidays, when available Performance-based profit-sharing and bonuses Brechbuhler Scales, Inc. and B-TEK Scales, LLC. are proud to be an equal opportunity workplace and affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity or expression, national origin, religion, age, disability, marital status, veteran status, genetic information or any other status protected by federal, state or local law.

Full-time Description Join Our Team as a Field Service Technician at DOC Services Inc.! Are you a skilled technician looking to advance your career with a leading company that values your hard work and expertise? DOC Services Inc. is the perfect place for you! With over 35 years of experience and a reputation for excellence, we are committed to providing reliable maintenance solutions that keep our clients' businesses running smoothly. Why DOC Services Inc.? Year-Round Stability: Enjoy consistent work. Growth and Development: Continuous training and opportunities to enhance your skills and advance your career. Comprehensive Support: Be part of a company that sets you up for success, with robust resources and a dedicated support system. Flexible Scheduling: Achieve work-life balance with schedules designed to fit your lifestyle. Top-Notch Benefits: Competitive compensation, 401(k) with company match, medical, dental, and vision insurance, life insurance, and disability coverage. Your Role as a Field Service Technician You'll be at the forefront of ensuring equipment runs efficiently in big-box retail environments. Your main responsibilities include: Diagnosing and repairing mechanical and electrical failures on electromechanical equipment. Performing preventive maintenance while adhering to OSHA safety standards. Skillfully using hand and power tools for equipment assembly, disassembly, and repair. Promptly responding to service calls to keep our clients' equipment operating seamlessly. Communicating effectively with customers and colleagues, embodying our commitment to top-tier service. What You Need to Succeed: A high school diploma or GED. 2+ years of equipment repair experience or equivalent training. Strong mechanical and electrical skills, with the ability to read schematics. A valid driver's license with a clean driving record. Excellent interpersonal skills and a professional attitude. The ability to work independently, pay close attention to detail, and remain organized. Physical capability to stand, bend, drive for extended periods, lift up to 75 lbs, and work at heights over 6 feet. What We Offer: Tools of the Trade: Company vehicle, phone, laptop, and gas card provided. Financial Security: Competitive pay and a 401(k) plan with a company match. Health and Wellness: Comprehensive medical, dental, and vision insurance options. Career Advancement: Continuous training and professional development opportunities. Company Culture: Be part of a respected, nationwide service company that celebrates its heritage and looks forward to the future. Join us and bring your expertise to a team that values quality, dedication, and professionalism. Apply today and become part of a company where your skills will be recognized and rewarded. DOC is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment based on race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, disability, or any other federal, state, or local protected class. Salary Description $20.00 - $26.00 per hour

Dugan & Meyers is growing - and we're looking for a Field Engineer (Line & Grade) to join our Columbus team. If you have experience with commercial self-perform concrete and enjoy working in the field with precision and purpose, we want to talk to you. Why Choose Dugan & Meyers? Established in 1935, Dugan & Meyers has a rich history in the construction industry. Our collaborative approach and ability to self-perform critical construction tasks set us apart, ensuring superior project execution. We excel in General Construction, Construction Management, Design-Build, Water and Wastewater Construction, and Concrete Construction services. Your responsibilities in this role: * Accurately maintaining all physical site dimensions and controls using Robotic Total Stations, GPS systems, and site level. * Accurate stake out of building lines including foundations, walls, embeds, and pipe work. * Review and understand construction drawings and identify discrepancies. Incorporates sketches and revisions provided as supplements to the drawings. * Check 3d models provided by our BIM department to ensure they match construction documents. * Work with and lead multiple crews throughout the entire construction process. * As-built existing conditions and contract work to confirm correctness. * Prepare As-built documents for turn over to client. What you need to qualify: * Prefer 2 years or more related job experience in the commercial construction industry * Experience with self-perform work which includes structural concrete, and water and wastewater stake out. * Understanding of construction scheduling and cost control. * Experience with AutoCAD, Excel, Bluebeam Benefits and Perks * A supportive employer that invests in your professional growth with training and certification opportunities. * Job stability in a growing company with a long-standing reputation * Comprehensive health, dental, and vision insurance * Generous 401K plan with company match * Uncapped referral bonus program * Company paid life insurance and more We build more than projects - we build people. Ready to take the next step? Dugan & Meyers is an Equal Opportunity Employer and part of Ohio's Drug Free Safety Program. Details Employee Type Full-Time Regular Location Columbus OH Apply Processing...

Job Description Field Service Technician, Paint Booths and Welding Equipment Company: Collision Correction Equipment | Location: Hilliard, Ohio | Work Setting: Field based, mostly indoors Independent, customer-facing role maintaining and repairing industrial paint booths and welding equipment at body shops and dealerships. Company vehicle and core tools provided. Flexible schedule options with most weeks near 40 hours. Employment TypeFull time or part time ScheduleMon to Fri, typical service window 7 a.m. to 6 p.m.TravelLocal and regional in OH, IN, KY; occasional overnights Compensation$35 to $45 per hour Why this role Autonomy in the field with direct impact on customers Company vehicle, tools, and steady weekday work Variety across sites and systems, not a repetitive line job Mostly climate-controlled environments Quick hiring process with an immediate start available What you will do Perform preventive maintenance, multi-point inspections, and general service Diagnose and repair electrical controls and power, including relays, circuits, PLCs, and schematics Work with 110V, 240V, and three-phase power Service blowers, fans, motors, airflow, and heating elements Verify gas pressure and supply; maintain compressed air and drain lines Remove faulty parts and install replacements Document work performed and communicate next steps with customers What you bring Hands-on service or maintenance experience with electromechanical systems Ability to read schematics and use a multimeter in the field Experience with paint booth or welding equipment is a strong plus Strong troubleshooting, time management, and communication skills Requirements Valid driver's license and insurable MVR Able to pass background and drug screening Comfortable lifting 50 to 60 lbs, climbing ladders or man-lifts, and working in tight spaces Schedule and travel Monday to Friday, typical service window 7 a.m. to 6 p.m. Flexible 4- or 5-day workweek options Regional day travel with occasional overnights as needed Tools and support Company vehicle for field work Core tools provided in the van; you may use some of your own as preferred About Collision Correction Equipment Local supplier, installer, and service partner for industrial equipment used in auto body and aftermarket automotive work. Primary equipment focus is paint booths and welding systems for body shops, car dealerships, and similar businesses. Screening note: Driving a company vehicle is required. Please apply only if your license and driving history are insurable under standard company auto insurance guidelines. How to apply Apply through Loxo. We will review quickly and follow up with next steps. Keywords: Field Service, Paint Booth, Welding, PLC, Three-phase, Automotive Equipment, Industrial Service, Maintenance Technician

AAA Club Alliance is currently seeking a Field Service Engineer at our Worthington, OH location. * This role will require you to work onsite Monday through Friday* The primary duties of the Field Service Engineer are: * Provide front line support to the business community. Responsible for deployment, support and removal of, equipment including phone, desktop, printers, tablets etc. Work with the Technical Asset Manager to properly capture and inventory assets in the field. Document activities in work notes within a Service Now Incident, supplying relevant technical and non-technical information. * After-hours (24x7) on-call Service Desk rotation is required. * Support connectivity issues (VPN, DUO 2 Factor, Citrix, Access to remote applications). Perform device setup and deployment (desktops, printer, mobile, A/V technologies etc.) * Analyze, troubleshoot, and repair products/equipment, Identify, analyze, and repair product failures, orders and replace parts as needed. Access software updates, drivers, knowledge bases, and FAQ resources on the Internet/Intranet to aid in problem resolution. * Document all pertinent end user identification information, including name, contact information, business unit, nature of problem or issue and impact to business operations. Prioritize and schedule incidents. Escalate issues (when required) to the appropriately experienced technician and/or management. * Perform hands-on problem remediation at the desktop level, including installing and upgrading software, installing hardware, implementing file backups, and configuring systems and applications. Perform preventative maintenance, including checking and cleaning of workstations, printers, and peripherals. * Test problem resolution procedures to ensure incident has been adequately resolved. Minimum Qualifications: * Bachelor's Degree or professional technical certifications in a related area, or equivalent work experience. 2 - 4 years of applicable experience, preferably with PC's, laptops, tablets, and servers. * Knowledge of basic computer hardware, including desktops, laptops, virtual machines and printers. Experience with desktop and server operating systems, including Windows 7 and 10. * Understanding of mobile device set up, configuration and support. * Extensive knowledge and support experience with Microsoft products including MS Office, Operating Systems, Active Directory, group policy, MS Exchange client and virtual desktops. * Working knowledge of a range of diagnostic utilities, including Symantec, McAfee and HP utilities. Familiarity with the fundamental principles of ITIL. * Exceptional written and oral communication skills. * Great customer service skills both on the phone and off. Ability to establish and maintain professional working relationships with clients, suppliers, staff, and management, as well as communicate complex information clearly to both technical and non-technical audiences. * Exceptional interpersonal skills, with a focus on rapport-building, listening and questioning skills. * Knowledge of basic networking and Avaya IP Phone Systems are a plus. * Valid driver's license with access to your own automobile is required. Travel and schedule flexibility is required. At AAA, your success is our success. What we can offer you: * The starting base hourly compensation for this position is $23.00 to $35.73. * The base pay range shown is a guideline for compensation and ultimate salary offered will be based on factors such as applicant experience and geographic location.* * Comprehensive health benefits package. * Up to three weeks of paid time off accrued during your first year. * 401(K) plan with company match up to 7%. * Professional development opportunities and tuition reimbursement. * Paid time off to volunteer & company-sponsored volunteer events throughout the year. * Other benefits include a free AAA Premier Membership, Health & Wellness Program, Health Concierge Service, Health & Life Insurance, Short Term/Long Term Disability. Full time Associates are offered a comprehensive benefits package that includes: * Medical, Dental, and Vision plan options * Up to 2 weeks Paid parental leave * 401k plan with company match up to 7% * 2+ weeks of PTO within your first year * Paid company holidays * Company provided volunteer opportunities + 1 volunteer day per year * Free AAA Membership * Continual learning reimbursement up to $5,250 per year * And MORE! Check out our Benefits Page for more information ACA is an equal opportunity employer and complies with all applicable federal, state, and local employment practices laws. At ACA, we are committed to cultivating a welcoming and inclusive workplace of team members with diverse backgrounds and experiences to enable us to meet our goals and support our values while serving our Members and customers. We strive to attract and retain candidates with a passion for their work and we encourage all qualified individuals to apply. It is ACA's policy to employ the best qualified individuals available for all positions. Hiring decisions are based upon ACA's operating needs, and applicant qualifications including, but not limited to, experience, skills, ability, availability, cooperation, and job performance. Job Category: Information Technology

AAA Club Alliance is currently seeking a Field Service Engineer at our Worthington, OH location. *This role will require you to work onsite Monday through Friday* The primary duties of the Field Service Engineer are: Provide front line support to the business community. Responsible for deployment, support and removal of, equipment including phone, desktop, printers, tablets etc. Work with the Technical Asset Manager to properly capture and inventory assets in the field. Document activities in work notes within a Service Now Incident, supplying relevant technical and non-technical information. After-hours (24x7) on-call Service Desk rotation is required. Support connectivity issues (VPN, DUO 2 Factor, Citrix, Access to remote applications). Perform device setup and deployment (desktops, printer, mobile, A/V technologies etc.) Analyze, troubleshoot, and repair products/equipment, Identify, analyze, and repair product failures, orders and replace parts as needed. Access software updates, drivers, knowledge bases, and FAQ resources on the Internet/Intranet to aid in problem resolution. Document all pertinent end user identification information, including name, contact information, business unit, nature of problem or issue and impact to business operations. Prioritize and schedule incidents. Escalate issues (when required) to the appropriately experienced technician and/or management. Perform hands-on problem remediation at the desktop level, including installing and upgrading software, installing hardware, implementing file backups, and configuring systems and applications. Perform preventative maintenance, including checking and cleaning of workstations, printers, and peripherals. Test problem resolution procedures to ensure incident has been adequately resolved. Minimum Qualifications: Bachelor's Degree or professional technical certifications in a related area, or equivalent work experience. 2 - 4 years of applicable experience, preferably with PC's, laptops, tablets, and servers. Knowledge of basic computer hardware, including desktops, laptops, virtual machines and printers. Experience with desktop and server operating systems, including Windows 7 and 10. Understanding of mobile device set up, configuration and support. Extensive knowledge and support experience with Microsoft products including MS Office, Operating Systems, Active Directory, group policy, MS Exchange client and virtual desktops. Working knowledge of a range of diagnostic utilities, including Symantec, McAfee and HP utilities. Familiarity with the fundamental principles of ITIL. Exceptional written and oral communication skills. Great customer service skills both on the phone and off. Ability to establish and maintain professional working relationships with clients, suppliers, staff, and management, as well as communicate complex information clearly to both technical and non-technical audiences. Exceptional interpersonal skills, with a focus on rapport-building, listening and questioning skills. Knowledge of basic networking and Avaya IP Phone Systems are a plus. Valid driver's license with access to your own automobile is required. Travel and schedule flexibility is required. At AAA, your success is our success. What we can offer you: The starting base hourly compensation for this position is $23.00 to $35.73. * The base pay range shown is a guideline for compensation and ultimate salary offered will be based on factors such as applicant experience and geographic location.* Comprehensive health benefits package. Up to three weeks of paid time off accrued during your first year. 401(K) plan with company match up to 7%. Professional development opportunities and tuition reimbursement. Paid time off to volunteer & company-sponsored volunteer events throughout the year. Other benefits include a free AAA Premier Membership, Health & Wellness Program, Health Concierge Service, Health & Life Insurance, Short Term/Long Term Disability. Full time Associates are offered a comprehensive benefits package that includes: Medical, Dental, and Vision plan options Up to 2 weeks Paid parental leave 401k plan with company match up to 7% 2+ weeks of PTO within your first year Paid company holidays Company provided volunteer opportunities + 1 volunteer day per year Free AAA Membership Continual learning reimbursement up to $5,250 per year And MORE! Check out our Benefits Page for more information ACA is an equal opportunity employer and complies with all applicable federal, state, and local employment practices laws. At ACA, we are committed to cultivating a welcoming and inclusive workplace of team members with diverse backgrounds and experiences to enable us to meet our goals and support our values while serving our Members and customers. We strive to attract and retain candidates with a passion for their work and we encourage all qualified individuals to apply. It is ACA's policy to employ the best qualified individuals available for all positions. Hiring decisions are based upon ACA's operating needs, and applicant qualifications including, but not limited to, experience, skills, ability, availability, cooperation, and job performance. Job Category: Information Technology

**Power your future with Qualus** in our Field Engineering department as a Lead Relay Field Engineer. The Lead Relay Field Technician calibrates, installs, maintains, and repairs protective relays and associated equipment to ensure the efficient, safe, reliable operation of the electric grid. They will be required to maintain, install, repair, and troubleshoot complex control systems, protective relay systems (microprocessor and electro-mechanical); substation and electric utility protection systems; station automation and supervisory control and data acquisition (SCADA) systems. **Responsibilities** + Interprets project-level scope of work and effectively plans commissioning and resource scheduling and provides team leadership for completing test activities efficiently, on time and without service interruptions, adhering to all established safety protocol. + Interprets substation drawings (e.g., single line drawings, AC and DC schematics, panel wiring diagrams, and panel layout drawings). + Writing procedures and/or test plans in support of maintenance and construction activities including development of isolation plans and functional guidelines. + Testing, including (without limitation): reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc. + Leading and performing routine troubleshooting and repair of substation relaying and control equipment. Commission new substations, power equipment, relaying (electro-mechanical, solid state and microprocessor), pilot channel equipment (power line carrier, pilot wire, transfer, transfer trip, fiber optic, CVT's, line tuners, line traps, etc.), controls and communications equipment. + Providing Project Technical Support to Field Service personnel. + Providing technical mentorship to junior level field service personnel. + Is considered a subject matter expert in the area of protective relaying in the field. + Serve as a technical lead for small project teams. **Qualifications** + Bachelor's Degree in Electrical Engineering from an ABET accredited university + Minimum of 7 years of field experience in commissioning, panel and equipment checkout, relay calibration, testing and repairing substation relaying and control schemes + Experience is desirable in any of the following related areas: substation design (including protection & control engineering); substation construction; substation commissioning; SCADA/Fault Data/SER/Integration-Automation equipment installation and testing. + 3 phase power systems; power system protection & control schemes; test equipment; test equipment software + Test equipment and toll/wiring usage; interpretation of wiring and elementary diagrams; basic test skills to perform duties listed above; basic PC skills. + Quickly learn and apply test procedures for various types of substation equipment; communicate effectively with diverse groups, tailoring communication for audience and situation. + Learn and apply client's switching procedures and safety measures as required. + Reference and complete assignments as described in applicable specifications. + Perform regular field work both indoors and outdoors. + Strong interpersonal skills, communication skills, business acumen, management ability + Proficient in Microsoft Office (Word, Excel and Outlook) + Valid Driver's license and good driving record + Ability to communicate effectively in English (inclusive of reading and writing) due to the nature of safety-related materials, documentation, and interactions with clients. \#LI-JD1 **Benefits & Compensation** Qualus benefits offered include Medical, Dental, Vision, Life Insurance, Short and Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Parental Leave, Paid time off, and Holidays, for those who qualify. The expected compensation range for this position is based upon several factors, including but not limited toeducation, qualifications, prior relevant work experience and work location. **Company Overview** Qualus is a leading pure-play power solutions firm and innovator at the forefront of power infrastructure transformation, with differentiated capabilities across grid modernization, resiliency, security, and sustainability. The firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, and specialized field services. Qualus also provides software and technology enabled services and develops breakthrough solutions for critical power industry challenges such as distributed and variable resource integration, emergency management, and secure data exchange. The firm has over 1,800 professionals, with offices throughout the U.S. and Canada. **EEO** At Qualus, we believe everyone has value; and that the diversity and inclusion among our teams is what sets us apart for optimal success. We put people first because we care. To view a copy of the Qualus Equal Opportunity and Affirmative Action Policy Statement, click here. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process, and need an alternative method for applying, please email **********************. Submit Referral Submit Referral **Job Locations** _US-OH-Columbus_ **ID** _2025-4509_ **Category** _Field Services_ **Position Type** _Regular Full Time_ **Remote:** _Yes_ **Salary Range** _$47.00 - $95.00/ per hour_

Full-time Description Network Technician Tier 2 About Us: DataPerk is a leading IT Managed Service Provider dedicated to excellence, integrity, partnership, and innovation. Our comprehensive range of services includes web design, programming, hosting, data cabling, network design, hardware and software support, and managed service packages. We take pride in our collaborative and supportive work culture and are committed to delivering secure, scalable technology solutions efficiently and promptly. If you are a skilled IT professional looking to join a dynamic team then apply today! DataPerk is seeking a talented Network Technician Tier 2 to contribute to our mission of providing exceptional IT services tailored to the specific needs of our clients. Role and Responsibilities: General Networking Possess a strong understanding of general networking concepts and the OSI model. Install, troubleshoot, and repair structured cabling, and review technical drawings. Configure and troubleshoot DHCP and DNS (server and gateway). Perform latency checks, packet captures, and review overall network health. Switching/Routing Install, configure, and troubleshoot switches and routers (Fortinet, Meraki, Cisco). Understand broadcast domains and implement VLANs. Install, configure, and troubleshoot switch stacking and power failover. Understand and troubleshoot network topologies. Firewalls Install, configure, and troubleshoot firewalls and site to site VPNs (Fortinet, Meraki, Cisco). Install, configure and troubleshoot client SSL-VPNs (Fortinet, Meraki, Cisco). Experience maintaining licensing and configuration backup plan. Wireless Implement, configure, and troubleshoot wireless systems including Fortinet, Meraki, Cisco, and UniFi. Maintain licensing and backup configuration plans for wireless systems. Intermediate Experience Microsoft 365 administration, configuration, and troubleshooting Server administration, configuration, and troubleshooting Storage administration, configuration, and troubleshooting Network administration, configuration, and troubleshooting Benefits: DataPerk offers an excellent benefits package which includes: BCBS Health, Dental and Vision Insurance (DataPerk pays for 50% of Health Insurance premiums) Company sponsored Short Term Disability, Long Term Disability and Life Insurance Plan Simple IRA Plan with a company match up to 3% contribution Paid Holidays, Paid Time Off, Paid Bereavement, Paid Floating Holidays and more Requirements A bachelor's degree in the area of specialty or an equivalent combination of education and experience. At least five years of industry experience in Network Administration. Possess at least one of the following certifications: CompTIA Network+ Cisco Certified Network Associate (CCNA 200-301 Cisco Certified DevNet Associate Fortinet NSE 4-6 Possess two or more of the following certifications: Microsoft Certified: Azure Administrator Associate Microsoft Certified: Azure Security Engineer Associate Microsoft Certified: Windows Server Administration Fundamentals CompTIA Server+ CompTIA Security+ Certified Ethical Hacker VMware Certified Professional (VCP) Red Hat Certified Engineer (RHCE) Cisco Certified Network Associate (CCNA) Associate in computer science or comparable experience Excellent problem-solving skills and the ability to work in a fast-paced environment. Strong communication and collaboration skills. A commitment to delivering top-quality IT solutions and support.

Alexandria Field Services, an SBP brand is currently hiring a Part Time Field Stocking Associate. As a Field Stocking Associate/Merchandiser, you will be responsible for stocking and maintaining Moulding merchandise in aisles at Home Depot stores within an assigned territory. This position requires physical work, including but not limited to heavy lifting, and possibly extensive driving to assigned Home Depot stores within your assigned territory. Responsibilities and Essential Functions: * Traveling and attending to multiple Home Depot stores locations within an assigned territory on days and times as scheduled or as otherwise required. * Identify and read tickets, SKUs, UPC labels and reports. * Loading, unloading, sorting and stocking out moulding and other products from cart. * Replenish inventory according to company guidelines. * Upkeep of maintenance in aisles includes restocking bins, removing damaged/unsellable material, and issuing credits electronically on Home Depot handheld phone. * Maintain signage/pricing and recover the aisles since the last service per company guidelines. * May need to operate machinery (handsaw) or drill when needed. * Follow all safety procedures. * Other duties may be assigned by management. Physical Requirements: * This position is very labor intensive and requires the ability to lift/move up to 50lbs. * Prolonged periods of sitting while driving to cover assigned territory. Required Credentials: * A valid United States driver's license * Reliable transportation, including current automobile registration and insurance in sufficient amounts (to be determined by the Company) * Proficiency in Microsoft Software -Teams, Excel, Word, and Outlook, as well as company time keeping and mileage system. * Must have a strong commitment to providing excellent customer service to store management and customers. * Attention to detail and the ability to complete job duties with high degree of accuracy. * Self-disciplined and capable of identifying and completing critical tasks independently, with minimal supervision. Specialty Building Products is the leading distributor of specialty building products in North America. SBP operates under the brands U.S. LUMBER, Alexandria Moulding, REEB Millwork, DW Distribution, Millwork Sales and Amerhart. We serve 45 states in the U.S. and 8 provinces in Canada from over 40 locations. Here at SBP we are a people first organization, our team is built upon strong culture and standards for success. We value your perspective and want to learn more about you with a commitment to laying the foundation for you to build a successful career with us. Join us and EVOLVE your future at Specialty Building Products! Being a part of SBP you will be eligible for many benefits. Full-Time benefits would include: * Hourly pay of $17.50. Paid Weekly * 401(k) with Company Match * Company-Paid Time Off * Cell phone & Mileage Reimbursement We are proud to have the best team in our industry. We have experienced a tremendous amount of growth as a company. This growth has served not only our customer base but has also provided significant opportunities for advancement amongst our employees. Alexandria Moulding/ Specialty Building Products is an equal opportunity employer. It is our policy of Specialty Building Products not to discriminate in hiring and employment on the basis of race, color, religion, national origin, sex, disability, age, military status, genetic information, or other protected class status in accordance with all applicable federal, state, and local laws.

Description:Job Title: Field Service TechnicianLocation: Columbus, OH Company Overview: Technical Diagnostic Services (TDS), a TechPro Power Group company, based in Fort Worth, TX, has been delivering industry-leading service solutions for over 25 years that empower its customers to safely start up and optimize the performance of their facilities' mechanical, electrical, and controls systems. TDS provides mechanical, electrical, instrumentation and control construction, testing, and start-up and commissioning services to the Power Generation, Oil & Gas/ Petrochemical, Heavy Process, and other Industrial end markets. We are a dynamic and rapidly growing company in search of highly skilled Field Service Technicians to join our team to support a large Data Center project in the greater Columbus, Ohio area. Key Responsibilities: Performing the necessary Acceptance Testing for electrical equipment within Data Center Facilities. Safely use hand and power tools, metering & testing equipment, and precision instruments. Collaborate with internal team members & customers/ end-users to complete projects within defined timelines. Follow safety protocols and adhere to all relevant regulations and guidelines. Maintain accurate records of work performed and materials used. Qualifications: Expertise in switchgear maintenance, troubleshooting, and breaker installation. Strong electrical aptitude, understanding of power systems and problem-solving skills. Thorough understanding of LDL, L2, L3 inspections and testing procedures. Proficiency in secondary injection testing of breakers and PT/CT wiring installations. Familiarity with bus installations, meter configurations, and control wiring. Ability to read and interpret electrical drawings and schematics. Hands-on experience with testing and maintenance tools (multimeters, megohmmeters, etc). Strong communication skills for interacting with customers and providing technical support. Ability to troubleshoot complex electrical issues and provide timely resolutions. Ability to work independently and as part of a team. Experience with daily reporting and documentation of work performed. Willingness to travel to various project sites within the U.S. Commitment to safety and adherence to safety protocols. Required Qualifications: Minimum 3-5+ years of experience in switchgear installation, testing, and maintenance, preferably in industrial, utility, and/ or data center environments. Knowledge of industry-specific electrical code, regulations, and related safety standards/ protocols (OSHA, NFPA 70E). Project Details: Project(s): Data Center Site Location(s): Columbus, OH area Per Diem: Yes, Provided ($150/day x 7 days per week) Mob/ Demob: Yes, $1000/each way Schedule: Full-time Monday - Friday Pay-rate: Based Upon level of Expertise. Overtime: Yes, potential for overtime varies Start Date: Immediately (Mid October 2025) Benefits: PTO + Paid Holidays 401(k) Dental insurance Health insurance Vision insurance Requirements: Physical Requirements: This job involves both indoor and outdoor work. While performing the duties of this job, the employee is regularly required to: Lift, carry and/or move up to 75 pounds repeatedly. Climb ladders, staircases, step stools, stand, walk, sit, and operate vehicles for extended periods. Bend, stoop, crawl and work in awkward positions or confined spaces for several hours. The employee may occasionally be required to: Work outdoors in varying weather conditions including intense heat/cold, muddy, and wet environments. Perform precision tasks with instruments and fittings. Communicate verbally and in writing. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this position. TechPro Power Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. We celebrate diversity and are committed to creating an inclusive environment for all employees. This job description outlines the primary responsibilities and qualifications for the position, highlighting the collaborative and essential skills necessary for success. While we aim to provide an accurate depiction of the role, actual duties may vary based on organizational needs and evolving business requirements. These statements describe the general nature and level of work performed and are not an exhaustive list of all responsibilities, duties, and skills required.