Field technician jobs in Hoover, AL

JOB SUMMARY: Action Environmental is currently looking for field technicians for our growing office. This position will require a hardworking, hands-on, safety conscious work ethic. Technicians are responsible for providing cleaning, vacuum, flushing, and blasting services in the following industry types: power plants, steel manufacturing, transportation, plastics, food and beverage, utilities, pharmaceuticals, pulp & paper, paints & coatings, wire & cable, oil refining, chemicals, seed production. DUTIES AND RESPONSIBILITIES: Participate in practical and manual activities on a daily basis. Adhere to all policies, procedures, and guidelines to ensure that health and safety standards are achieved, including but not limited to wearing all protective safety equipment Engage in strenuous physical labor including lifting, pulling and pushing heavy objects Operate light and heavy equipment including, but not limited to: blasting equipment, vacuum trucks and hoses, etc May require work in confined spaces, elevated spaces, hot, wet, cold, and foul smelling environments through an 8-12 hour shift while holding the various sizes of vacuum hoses. Work in environments with Hazardous Materials and excessive noise levels Work extended hours, evening, and weekend work, as well as work out of town for extended periods of time, when mandatory. Because of the emergency response and operational nature of the position, a continuing condition of employment is that this position acknowledges and agrees to be on-call 24 hours a day, 7 days a week, 365 days a year and on occasion will require work during weekends and holidays Additional duties as assigned EXPERIENCE AND SKILL REQUIREMENTS: Must be able to pass DOT Medical and Pulmonary Fit Tests Consistently demonstrate safe working practices required Ability to read and write in English is required Maintain a valid driver's license and maintain a clean driving record to drive company vehicles Must have a working cell phone and answer phone or respond to work within 15 minutes Ability to work extended hours, weekends, holidays and out of town Ability to lift up to 75 pounds and perform strenuous physical labor in various work environments

We are growing and are thrilled to be recruiting in the Birmingham, AL area. Joining a team in our Breast & Skeletal Health you will be responsible for preventative maintenance, repairs and servicing of our innovative medical imaging and interventional products. As a Hologic FSE, you travel to our customer sites to ensure our products are calibrated and optimized for high performance. You will be able to build relationships with our customers, putting them at ease that you are there to investigate and solve any technical issues. Summary Of Duties And Responsibilities Responsible for the installation and service of Hologic products (mammography, digital mammography, bone densitometry, and mini c-arms) which include electrical, mechanical and software components. Establish and maintain a high level of customer satisfaction with Hologic's products, support and service. Complete all remedial service actions, standard system checks, and required hardware and software upgrades in accordance with approved policies and procedures. Assist other Field Engineers as necessary. Maintain a good customer service reputation by complying with all regulatory requirements and all aspects of DQSM. Complete and submit all required paperwork on time and accurately. Train customers on the basic operation and use of Hologic products. Provide feedback to the District Manager concerning product performance anomalies encountered in the field, and make recommendations for service improvements. Provide support at conventions, trade shows and customer trials. Provide pre and post sales support by maintaining close working relationships with sales and customers to ensure expectations are met and equipment installations are handled as planned. Manage inventory, keep accurate records, and return unused and failed parts promptly. Promote service contract offerings and assist the local Service Sales Specialist in selling service agreements to customers within your assigned territory. Manage the assigned territory in an organized fashion. Perform PM's on time, provide expeditious on-site response and minimize equipment downtime. Respond to customer inquiries in written form (with managerial approval), in person, or via telephone as needed. Escalate customer issues and unresolved product problems to service management in a comprehensive and timely manner. Qualifications Must be a self-starter, able to travel and work independently with minimal supervision. Must be capable of multi-tasking, setting priorities and scheduling work activities. Ability to resolve problems, think analytically and communicate professionally in high pressure, time sensitive, customer environments. Willing to work flexible hours and overtime on short notice. Position requires the ability to be “on call” after normal working hours. Depending on location, position may require frequent overnight travel. Must have reliable transportation, possess a valid driver's license, and carry adequate auto insurance. High degree of mechanical aptitude. Excellent communications skills, both written and verbal are required Education Associate's Degree or equivalent in electronics, computer science or related technical discipline is required. Experience 2-4 years experience in a field service position working with customers to resolve problems related to x-ray, digital imaging or related medical equipment preferred. Experience designing, installing, or maintaining computer networks highly desirable. Specialized Knowledge Strong computer literacy. Must be proficient with DOS and Windows, certified training and/or working knowledge of UNIX /NT/Solaris or other software operating systems preferred. The annualized base salary range for this role is $63,900 to $100,000 and is bonus eligible. Final compensation packages will ultimately depend on factors including relevant experience, skillset, knowledge, geography, education, business needs and market demand. Agency And Third Party Recruiter Notice Agencies that submit a resume to Hologic must have a current executed Hologic Agency Agreement executed by a member of the Human Resource Department. In addition, Agencies may only submit candidates to positions for which they have been invited to do so by a Hologic Recruiter. All resumes must be sent to the Hologic Recruiter under these terms or they will not be considered. Hologic's employees are subject to third-party COVID-19 vaccination requirements, including from customers and governmental entities. Hologic is an equal opportunity employer and consistent with federal, state, and local requirements, will consider requests for reasonable accommodation based on disability or sincerely-held religious beliefs where it is able to do so without undue hardship to the company. Hologic, Inc. is proud to be an Equal Opportunity Employer inclusive of disability and veterans. Same Posting Description for Internal and External Candidates #LI-MG3

Job Description Are you ready to begin your journey towards a rewarding career in the environmental field? Does protecting the environment and gaining hands-on experience as an Environmental Field-Testing Technician interest you? Apply today! You'll get great hands-on experience, travel to exciting customer locations within your region (with expenses covered), and enjoy the great outdoors! This is a great opportunity in a recession-proof industry where the sky is the limit! As an Environmental Field-Testing Technician, you will have the opportunity to learn and advance within our rapidly growing company while simultaneously obtaining an education on the industrial processes that we serve. Benefits to the Environmental Field-Testing Technician role include a clear and progressive career path, upward mobility, PTO, and great benefits that kick in the month following your start date. Environmental Field-Testing Technician Info: Alliance Technical Group provides the full spectrum of services to support our customers' environmental needs, and ultimately, helps protect the environment. We are currently hiring enthusiastic, adventurous, science or mechanically minded individuals who have the desire to obtain valuable work experience and learn on the job. In this role, you will have the unique opportunity to gain exposure to a variety of industrial processes, and travel to various customer locations typically in your region/state, with all travel expenses paid. The work is conducted safely outdoors, on emissions source platforms, often at elevated heights, so you must love being outside. Starting pay rate is $20-$22 per hour, with generous quarterly profit-sharing bonuses and plenty of overtime available. In addition, you'll receive a great benefits package, paid time off, and the ability to receive referral bonuses. Duties & Responsibilities: In this important position, you will conduct Stack Emissions Testing including equipment preparation, deployment, staging/breakdown, sample collection and recovery. During our comprehensive training process, you will learn the following responsibilities, and once experienced, have the opportunity for rapid advancement: Conduct on-site field testing in a professional manner and transport testing equipment to customer sites Follow all test methods, procedures, and processes for quality source testing Apply careful mechanical and electrical skills while troubleshooting testing systems Qualifications: Must have a valid driver's license Enjoy being outdoors, working safely in all weather conditions Ability and desire to climb stairs and ladders and work at elevated heights Degree in environmental, engineering, or mechanical sciences, or related experience skill and ability is highly preferred Experience related to environmental response/sample collection, mechanical, construction, or electrical work is helpful and preferred Experience with or strong aptitude to learn the use of the MS Office Suite (Word, Excel, Outlook) & Adobe products Ability and desire to be on your feet, lift equipment up to 75 pounds, climb ladders or stairs and work at elevated heights and use tools or equipment requiring a high degree of dexterity Ability to distinguish between shades of color is critical for safety Employee Benefits: Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired after July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub In compliance with applicable Pay Transparency laws, Alliance Technical Group provides a range of compensation for job postings within locations that have these requirements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. The pay range for this entry-level role is $20-$22 per hour. Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #FIELDSERVICES

Telecommunication Technician - MSO-EPC The Mobile Switching Office-Evolved Packet Core (MSO-EPC), also known as the Southern Linc Network Operations Center (NOC), is the critical 24 x 7 x 365 monitoring and resolution facility. The primary responsibilities of the position are to provide network monitoring, 1 st level troubleshooting, documentation, and problem resolution for the Southern Linc LTE/4G wireless network. Successful candidate will participate in, coordinate and assist with providing system upgrades, capacity increases, emergency system restoration deployments, storm preparation and response, performance optimization and support the operational efficiency efforts of Southern Linc Wireless. Candidate will provide assistance to support any future build-out work for the Southern Linc LTE/4G network to include centralized Core infrastructure and RAN components, AC/DC power, and other facility-related needs. Candidate will work as part of a team on rotating shifts. These shifts include some nights, weekends and holiday work as the Operations Center is a 24 x 7 operation. JOB REQUIREMENTS + A.S Degree in Computer Science, Electronics, Digital Telecommunications, Data Networking or 3 or more years of technology industry work experience. + AC/DC power experience and knowledge highly desired. Working experience with enterprise-level power rectifiers, inverters and UPS preferred. + Facilities knowledge of cabling techniques and standards, HVAC operation, fire suppression systems and security monitoring systems a plus. + FCC, TCP/IP, Cyber Security and or other data networking certifications are desirable. + Knowledge and experience with installing, maintaining and or troubleshooting legacy TDM transport networks and or data networks is preferred. + Ericsson LTE Evolved Packet Core network experience with various tools, including ENM, Alarm Status Matrix, Alarm List Viewer, as well as Ericsson LTE RBS RAN experience with various tools, including, Element Manager, AMOS is preferred. + Experience with traffic analysis tools, such as NetScout, to identify faults and failures in network and end-user experience is desired. + Field Operations and or central switch office experience preferred. + Strong and proven technical problem-solving skills. + Ability to work and thrive within a team-oriented work environment. + Able to work on a rotating shift work schedule including some nights, weekends and holidays. + Very minimal travel requirements. Limited to training opportunities and the occasional off-site meeting. + Work location is primarily in-office. Occasional teleworking, as a portion of the shift schedule, a possibility. JOB RESPONSIBILITIES + Monitor, evaluate, resolve and/or escalate service impacting issues for the Southern Linc LTE network. + Assist with future buildouts of the Linc LTE/4G Network, including RAN field implementation, transport and networking testing/verification and central Core network expansion. + Provide 1st level identification, troubleshooting, resolution and/or escalation to Network Specialists or vendors for MPLS and TCP/IP data networks and connectivity, Ericsson MiniLink microwave remote troubleshooting. + Implement software configuration changes, replace faulty networking hardware, update maintenance logs, support switch room by installing/removing equipment & cabling, as well as server platforms. + Provide network connectivity wiring in the central Core, implement software configuration changes, as well as provide assistance for system installations, capacity increases, and upgrades of various types. + Provide tactical expertise to execute scheduled network changes system wide. Manage the workforce trouble ticketing system (create, assign, track, document, update and close). + Make effective use of monitoring and testing tools and applications to support various aspects of the LTE network to identify system failures, minimize service affecting problems, and maximize service availability. + Review network performance statistics for system health to identify marginal problems, make daily decisions on break-fix resolution on these issues, dispatch remote personnel to repair when required. + Operate a variety of communications and network test equipment including vendor-specific software tools, TCP/IP testing, data monitoring, and network sniffers. + Remotely troubleshoot and dispatch appropriate field operations and/or third-party vendors to resolve LTE RAN cell site issues. + Generate and analyze reports, charts and alarms to identify and provide solutions to issues/trends. + Working with Systems Engineers and Analysts, provide installation assistance for facilities, such as data and RF cabling, AC/DC power and equipment/rack installation needs. + Offer solutions and coordinate communication between field technicians, technical customer support, Operating Companies, critical customers, and telecommunications vendors. + Work as part of team executing storm/major event preparation and response. Practice Test TECH test: Online Products Login Page (eei.org) Click on "EEI Practice Test" on the right-hand side; a new window to the Edison Electric Institute website will open. Use the following information to log into the site to access the practice test: + Name: _southern_ + Password: _testing_ Practice tests: TECH - Technician Occupations Southern Company (NYSE: SO ) is a leading energy provider serving 9 million customers across the Southeast and beyond through its family of companies. Providing clean, safe, reliable and affordable energy with excellent service is our mission. The company has electric operating companies in three states, natural gas distribution companies in four states, a competitive generation company, a leading distributed energy solutions provider with national capabilities, a fiber optics network and telecommunications services. Through an industry-leading commitment to innovation, resilience and sustainability, we are taking action to meet customers' and communities' needs while advancing our goal of net-zero greenhouse gas emissions by 2050. Our uncompromising values ensure we put the needs of those we serve at the center of everything we do and are the key to our sustained success. We are transforming energy into economic, environmental and social progress for tomorrow. Our corporate culture has been recognized by a variety of organizations, earning the company awards and recognitions that reflect Our Values and dedication to service. To learn more, visit *********************** . Southern Company invests in the well-being of its employees and their families through a comprehensive total rewards strategy that includes competitive base salary, annual incentive awards for eligible employees and health, welfare and retirement benefits designed to support physical, financial, and emotional/social well-being. This position may also be eligible for additional compensation, such as an incentive program, with the amount of any bonus/awards subject to the terms and conditions of the applicable incentive plan(s). A summary of the benefits offered for this position can be found here **************************************************** . Additional and specific details about total compensation and benefits will also be provided during the hiring process. Southern Company is an equal opportunity employer where an applicant's qualifications are considered without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other basis prohibited by law. Job Identification: 15957 Job Category: Telecommunications Job Schedule: Full time Company: Southern LINC

Job Description MRI Field Service Engineer- A professional responsible for maintaining customer relations through the effective use of technical knowledge to install, troubleshoot, and service equipment at customer sites, generate service revenue, and adhere to state and federal regulatory requirements. Responsibilities include: Identify and resolve customer issues Provide exceptional customer service by setting clear expectations and meeting commitments and arrival times Professionally, safely, and accurately perform on-site system installations as well as de-installations Independently complete PMs, FCOs, and all related tasks Independently diagnose and resolve electronic, network, and mechanical problems Provide on-demand phone and on-site support as required Supports company-wide initiatives and policies and procedures Maintain inventory integrity through proper handling, inspection, and returning parts Other duties as assigned Requirements and skills: 5 years of MRI field service preferred. Experience working with GE Excite software and above (450W) preferred. Other OEM training is a benefit. Troubleshooting with strong electronics skills required Strong customer service and communication skills required. Must be self-motivated and able to physically bend, climb, kneel, reach, sit, squat, stand, and walk. Must be able to carry or lift to 50 lbs. routinely. Ability to commute to surrounding states. Powered by JazzHR KErK4d3Z1W

At Vertiv, we design, manufacture, and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. We are the trusted Service Provider for 70%+ of Fortune 500 companies, including industry-leading data centers and providers of colocation and cloud service. Why Vertiv is the best company for Field Service professionals: * Vertiv is an industry leader in Technology and Services with a best-in-class Customer Service and Safety culture * Company leaders have many years of hands-on Field Service experience in this industry and many others * Tremendous focus is placed on employee technical and leadership development * Technical Training takes place in our state of the art Training Academy or Regional Training Center with a strong focus on immersive, hands-on learning * Competitive benefits include: Company vehicle, smartphone, laptop, personal protective equipment (PPE), other tools-of-the-trade, 401k, Profit Sharing, & Generous PTO/Vacation Plan, Medical, Vision & Dental & more * Abundant technical resources including 24/7 Technical/Factory Support and technical online libraries of product documentation, work instructions, and self-help troubleshooting guides * Company-wide commitment to promoting a strong work/life balance * An employer-of-choice for Veterans with technical backgrounds The Field Service Technician is primarily responsible for scheduled and remedial (break-fix) service on Small to Medium UPS, Power Distribution Units & Battery system products (2-120KVA) serviced by Vertiv, commensurate with appropriate classroom and on-the-job training. The Field Service Technician is required to establish, promote and maintain excellent rapport with all customers, co-workers, sales representatives and others as appropriate. The Field Service Technician is primarily responsible to support products and services sold to our "Edge" market segment, including retail, financial, and municipal customers. RESPONSIBILITIES: ROLE * Perform service tasks as assigned and as per company policies and procedures * Capable of working under direct supervision or independently based upon training completion * Render on-site and phone assistance to customers * Communicate with Technical Support on technical or procedural issues * Implement Field Change Notices per published guidelines * Keep current on Safety Bulletins, Safety Field Change Notices, Field Change Notices, and Service Tips SAFETY * Operate in a safe manner in accordance with published safety guidelines * Maintain and operate company vehicle in accordance with local laws and company policy * Must wear appropriate PPE as per company guidelines and accordance with job duties * Adhere to work hours policy guidelines - "14 hours rule" * Report all work related accidents or injuries within 24 hours to the appropriate personnel. ADMINISTRATION * Complete accurate and timely administrative tasks (i.e. Time cards, expense report, mileage reports, Service Request task closure, service reports) per company guidelines * Maintain individual inventory and perform cycle counts in accordance with company policy * Maintain company property (company vehicle, credit cards, PPE, test equipment, laptop, etc.) per company policies CUSTOMER SATISFACTION * Provide proper and adequate communication to internal and external customers * Provide estimated time of arrival to the customer where applicable * Complete scheduled maintenance documentation properly and provide to the customer and local office upon completion of each assignment * Strive to provide all customers a "first time fix" for their equipment * Maintain customer satisfaction rates per company guidelines * Attend Customer Meetings as required PERFORMANCE * Maximize productivity by combining service opportunities * Complete all technical and administrative work in an efficient and timely manner * Capable of making technical and commercial decisions under pressure * Properly evaluate site and equipment for appropriate billing status * Maintain productive utilization rate per company guidelines * Perform inventory cycle counts per company guidelines * Adhere to company dress code and safety regulations * Meet or exceed on-site response time requirements for each customer * Understand and comply with company startup/escalation processes and procedures * Maintain proper and adequate level of internal communications QUALIFICATIONS Experience (one or more of the following) * ASEET or AMEET, or progress towards, is preferred * High School or Vocational School Diploma * 2-4 years military experience in a related technical field * 0-2 years of relevant industry experience Interpersonal and Administrative Skills * Communicate professionally and respectfully in both written and verbal forms * Manage time effectively by prioritizing and balancing technical tasks with administrative tasks * Collaborative with peers, customers, suppliers, and leadership * Complete administrative tasks (i.e. report writing, time entry, expense reporting, material debriefing, inventory counting, etc.) in a timely fashion Technical skills * Make basic site evaluation skills to include: environmental temperature, and general operating conditions * Familiarity with electrical / electronic test equipment and fundamentals * Follow written technical documentation (i.e. procedures and product manuals) to perform service tasks * Employ elementary fix/repair techniques based on directed supervision * Complete service tasks and return unit to full operating conditions based upon directed supervision * Summarize and report all work related tasks performed in written and verbal form * Efficient with a personal computer and associated applications (Microsoft Office, Vertiv software, etc.) WORKING CONDITIONS: * Travel is required * Flexible schedules (weekends, evenings, and holidays) * Valid driver's license * Due to the safety sensitive aspect of the role, candidates are required to successfully pass a drug test prior to employment. In addition, you will also be required to complete and pass a pre-employment background check and a motor vehicle records check. PHYSICAL REQUIREMENTS: While performing duties of the above jobs, the associate is regularly required to stand, walk, use hands and fingers, handle or feel objects, tools or other components; reach with hands and arms; stoop, kneel, crouch, or crawl; talk, hear and smell. The associate frequently is required to sit and climb or balance. Specific vision abilities required by this job include close vision, distant vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Must be able to consistently lift up to 50 pounds and occasionally up to 75 pounds. Notes: Vertiv will make reasonable accommodations whenever necessary for all qualified employees or candidates with disabilities (as defined by applicable law), provided that (1) the individual is otherwise qualified to safely perform the essential functions of the job and (2) such accommodations due not impose an undue hardship.

CUI Cable is seeking a skilled and dedicated Cable Technician to join our team. As a Cable Technician, you will be responsible for providing exceptional installation, relocation, troubleshooting, and auditing services for internet, cable, telephone, and alarm systems at our customers' premises. Cable experience is a requirement for this position, and we will provide you with a work truck to carry out your duties effectively. Responsibilities: Perform installations, relocations, troubleshooting, and audits of internet, cable, telephone, and alarm services at customer premises. Adhere to company installation policies to ensure high-quality service delivery. Operate and maintain tools and equipment properly, organizing and stocking the company vehicle with necessary equipment to fulfill job requirements. Prepare and maintain accurate time logs, reports, and related documentation in accordance with company and departmental policies. Requirements: Proficiency in using basic broadband installation tools and hand tools. Ability to lift objects weighing up to 80 lbs., work at heights up to 30 ft., and in confined spaces, including attics. Comfortable working both indoors and outdoors, adapting to different environments as necessary. Possession of a valid driver's license and a satisfactory driving record. Successful completion of thorough background checks and drug screenings. Flexibility in work schedule, including availability to work weekends. Minimum age requirement of 23 years or older. Employee Compensation and Benefits: At CUI, we prioritize your preferences and offer a range of options to suit your needs. We provide both W2 and 1099 employee options with competitive wages, ensuring your success and satisfaction. As part of our commitment to your professional growth, we promote from within and offer advancement opportunities throughout your career journey. Additionally, we offer an attractive list of benefits: Sign on Bonus: $500 - $1,500 dependent on amount of training needed Comprehensive benefit package, including health, vision, and dental coverage. 401k retirement plan with a company match. Company vehicle and gas card for work-related transportation. Weekly pay schedule. Monthly bonus potential. Pay increase after the first year. Paid holidays. Uniforms provided. Company cell phone. Optional Benefits Waived Program: If you own a late model white truck/van and do not require medical benefits, you may be eligible for our Benefits Waived program. Speak with a recruiter for more details. About CUI Cable Services: CUI Cable Services is a leading provider of solutions for multiple system operators (MSOs) in the telecommunications industry. Since 2001, we have been delivering exceptional services, exceeding industry standards. As a registered minority-owned and veteran-owned business, we pride ourselves on practicing our Core 4 values of Honesty, Integrity, Teamwork, and Quality. These values shape our company's culture, drive our decisions, and inspire us to continuously improve and provide the best possible experience for our employees, customers, and partners. Hiring Process: Our efficient hiring process ensures a smooth transition into your future career. Here are the steps involved: Application review and phone screening: Our recruiters will review your application and conduct a phone screen to discuss the job description and your work experience. In-person interview: If selected, you will be invited for an in-person interview with our branch managers. Pre-employment screening: Upon accepting the job offer, you will undergo a pre-employment drug screening and a nationwide background check. Start date: After successful completion of the screening process, we will coordinate your start date. If you are looking to start your career in the cable industry, join the CUI team and become part of our dedicated workforce. Apply today and embark on a rewarding journey with opportunities for professional advancement and personal fulfillment. Join our team at CUI Cable Services and embark on a rewarding career in the telecommunications industry.

Job DescriptionSalary: $20.00 - $25.00 based on experience and skillset The Lioce Group is hiring an MFP/Printer Service Technicianto join our growing service team. This role involves installing, maintaining, and repairing office printers, copiers, and multi-function devices (MFPs). Whether youre experienced in office equipment or have a background in other hands-on mechanical or technical fields, we want to hear from you! Founded in 1967, we are a proud family-owned business with deep roots in the North and Central Alabama community. Known for our superior customer serviceand commitment to excellence, weve built a reputation as one of the best places to work in North Alabama. We foster a welcoming, team-oriented environment where employees are treated like family, not just numbers. Our long-standing success is built on integrity, trust, and the drive to go above and beyond for our customers. Job Responsibilities Install, maintain, and repair MFPs, printers, and copiers Troubleshoot hardware, software, and basic network connectivity issues Perform preventive maintenance and respond to service calls in a timely manner Communicate clearly and professionally with customers Maintain accurate service logs and parts usage records Coordinate with the service team and dispatcher Follow safety procedures and company guidelines Qualifications High school diploma or equivalent Copier/MFP experience is a plus, but not required we will train the right candidate Mechanical or technical repair experience is highly valued including automotive repair, HVAC, cell phone/electronics repair, appliance repair, or similar Strong troubleshooting and problem-solving skills Basic understanding of networks and print drivers Valid drivers license and clean driving record Ability to lift up to 50 lbs and work independently Great time management and communication skills Benefits Competitive pay based on experience level and skillset Health, dental, and vision insurance 401(k) with company match Paid time off and holidays Ongoing training and manufacturer certification support Company vehicle Positive, supportive team environment Bring your hands-on experience and grow with a company that puts people first! Apply todayand join a respected, family-run team thats been leading in office technology for over 55 years.

MI Conveyance Solutions Field Service Technicians II provide the highest levels of mechanical service to meet the needs of our customers. Whether repairing and installing conveyor belts or repairing and maintaining mechanical equipment, we cater to the needs of our customers to keep their industry in motion. JOB DUTIES: Performs on-site belt installation, splicing, and preventative maintenance and occasional call outs for emergency repairs. Fabricate lightweight and/or heavyweight belts in shop. Performs rigging to facilitate the lifting of belt rolls, presses and tooling on and off conveyor systems. Performs basic millwright tasks such as torch heating and cutting a swell as removal and installation of conveyor components such as bearing, idlers, pulleys, gearboxes, and motors. Serves as customer contact on technical and service-related issues. Works under direct supervision and follows detailed guidelines to work on moderately complex repairs and installations. Works in a safe, courteous, and professional manner always. Ensures that processes and environmental conditions comply with local and national regulatory agencies, and Motion's safety standards. Performs other duties as assigned. Responsible for the installation, diagnostics, repair and support for equipment that is installed and operating at customer sites. Diagnose problems with equipment, assess the extent of the problem, document findings, make decisions to repair and/or replace parts. Keeps customers informed on the nature of service provided or outstanding issues and recommends system enhancements, upgrades, or repairs. Works under direct supervision and follows detailed guidelines to work on moderately complex repairs and installations. Ensures that processes and environmental conditions comply with local and national regulatory agencies, and Motion's safety standards. Provides technical support and training to customers on operational or maintenance aspects of system equipment. Communicates technical information to technical and non-technical stakeholders and meets customers daily or as required to ensure high levels of customer satisfaction. Performs other duties as assigned. Performs on-site services for new and existing clients, which may include on-site emergency repairs, equipment servicing and equipment upgrades on a 24/7 on-call basis. Willingness and ability to drive company vehicles in alignment with Company policy required within one year of start date; DOT preferred. Must be in alignment with company drug free workplace and other required customer regulatory requirements. EDUCATION & EXPERIENCE: Typically requires a technical degree and zero (0) to three (3) years of related experience or an equivalent combination. KNOWLEDGE, SKILLS, ABILITIES: Ability to read measuring and equipment and perform basic math calculations. Ability to operate shop equipment safely. Ability to operate (be trained to operate) manlifts, forklifts, hand power tools and shop equipment safely. Excellent communication skills Work effectively with customers, peers and management to resolve client issues. Willingness and ability to drive company vehicles in alignment with Company policy required within one year of start date; DoT preferred. Must be in alignment with company drug free workplace and other required customer regulatory requirements. PHYSICAL DEMANDS: Push/pull up to 100 pounds Lift/carry up to 100 pounds Lift bulky objects Neck rotation, trunk rotation, stair climbing, repetitive bending, kneeling, sustained squat, forward reaching, overhead reaching, reach and lift, ladder climb and carrying/crawling. Working at heights from manlifts, platforms and elevated walkways may be required. Requires wearing safety equipment and safety harness. Working conditions may be indoor and/or outdoor. Noise level may be loud at times. COMPANY INFORMATION: Motion offers an excellent benefits package which includes options for healthcare coverage, 401(k), tuition reimbursement, vacation, sick, and holiday pay. Not the right fit? Let us know you're interested in a future opportunity by joining our Talent Community on jobs.genpt.com or create an account to set up email alerts as new job postings become available that meet your interest! GPC conducts its business without regard to sex, race, creed, color, religion, marital status, national origin, citizenship status, age, pregnancy, sexual orientation, gender identity or expression, genetic information, disability, military status, status as a veteran, or any other protected characteristic. GPC's policy is to recruit, hire, train, promote, assign, transfer and terminate employees based on their own ability, achievement, experience and conduct and other legitimate business reasons.

Full-time Description At Sunbelt Fire, we're not just repairing equipment - we're serving those who save and protect lives . This purpose drives every maintenance performed, truck repaired, or service provided. We want to serve First Responders with excellence and are seeking talented, servant-hearted, individuals who want to be part of Sunbelt's mission glorify God in all we do. We're growing, and seeking a Field Service Technician based out of Prattville, Opelika, Clanton, or Tuskegee, AL areas to join our field service team at our new service and sales branch in Bessemer, AL. As a field technician, you can expect to work in a variety of environments, primarily focused on emergency response facilities and locations where emergency response vehicles are stationed. Our technicians work on the repair of aerial lifts and telescopic ladder systems, high output pumps and flow systems, electrical and hydraulic systems, structural weldments, drivetrain and suspension systems, annual service and inspections, welding and fabrication, and more! This position comes with a $2,000 signing bonus, paid out within the first 90 days. Requirements YOUR DAY-TO-DAY: Perform inspections, maintenance, and repairs on fire apparatus and related equipment. Conduct diagnostic tests and troubleshooting to identify and resolve mechanical and electrical issues. Repair or replace defective components, such as pumps, hoses, valves, and electrical systems. Install and upgrade equipment, including radios, sirens, and lighting systems. Test and calibrate fire apparatus systems to ensure they meet safety and performance standards. Conduct preventive maintenance tasks, including lubrication, fluid changes, and filter replacements. Keep accurate records of work performed, parts used, and equipment serviced. Stay up to date with advancements in fire apparatus technology and industry standards. Adhere to safety protocols and guidelines during all repair and maintenance activities. Maintain a clean and organized work environment, including tools, equipment, and service vehicles. Maintain inventory of spare parts, tools, and equipment necessary for repairs and maintenance. Communicate effectively with customers and fire department personnel regarding repair status and recommendations. WHAT YOU BRING TO THE TEAM: Passion about the mission of Sunbelt Fire, our core values, and serving those who save and protect lives High school diploma or equivalent. Preferably, minimum of 3 years relevant experience in heavy truck or emergency vehicle repair. Commercial driver's license preferred. Cummins, ASE, or welding certifications preferred. Strong understanding of automotive systems and components, including engines, transmissions, electrical systems, and braking systems. Knowledge of fire apparatus systems, including pumps, hoses, valves, electrical systems, and hydraulic systems. Strong problem-solving skills to identify and resolve mechanical and electrical issues. Attention to detail and accuracy in documenting work performed and parts used. Time management skills to prioritize tasks and meet deadlines in a fast-paced environment. POSITION TYPE: Full-time, Monday-Friday with opportunity for overtime. 90% travel with some overnight stays as required. BENEFITS: Medical, Prescription Drug, Dental and Vision Benefits offered through BCBS of Alabama and MetLife. Company paid Life Insurance. Company paid Long-Term Disability (Short-Term Offered). 401k with Company Match. Vacation and Sick Leave. Paid Holidays. Company provided industry training and continuing education in field. All positions are subject to background check and drug test. If you are interested in applying for this position, follow the steps below: 1). Step 1 - Complete Application 2). Step 2 - Complete Assessment via link below: **************************************** Since its founding in 1983, Sunbelt Fire is a family-owned and operated company providing apparatus, equipment, repair, and maintenance for the fire service. Today, Sunbelt Fire has a workforce of over 70 team members spread across five states. We not only deliver superior performance to our customers but also leave a lasting impact on the communities we serve. Rooted in dedication and teamwork, we have built enduring relationships, solidifying our position as a trusted partner in the fire service. Salary Description $35/hr + DOE, plus 2,000 signing bonus

Severe Service Specialists (Triple S) is a manufacturer's representative and factory authorized automation facility for valves that are engineered to withstand severe applications. Our ADREM™ line of specialty valves are engineered for the demanding requirements of the chlor-alkali industry. We pride ourselves on knowing our customers' processes and being able to provide flow control solutions. Triple S is also an authorized automation facility for Mogas, Adams, L&T, and other valve lines we represent. Severe Service Specialists is a subsidiary of FloWorks International LLC, which is a privately held company located in Pasadena, Texas. As a Field Service Technician you will operate in the field and in the shop, on-call or provide technical support to assigned customers. Installs, configures, performs problem determination and maintains products and equipment at customer sites, following blueprints, wiring diagrams, and manufacturer's instructions, utilizing product and technical knowledge of equipment. Repairs or coordinates repair of worn or defective products or equipment. Perform skilled, technical work in the design, installation, testing, calibration, maintenance, and repair for assigned product or process. When not busy with above will work in warehouse pulling orders, automating valves assemblies, shipping, receiving and other warehouse duties as needed. The exciting things you will do in this role…. Service and repair of Limitorque electric actuators Knowledge of electrical, pneumatic, and hydraulic control systems. Install, set-up, and commission MOV's, AOV's, HOV's. High level of electrical knowledge and theory. Builds, tests, troubleshoots, repairs and modifies equipment, parts, components and assemblies. Diagnoses and reports malfunctions. Learns and understands particular technical equipment; attends training and completes certification as required. A must: 2+ years experience in Limitorque service and repair preferred. 5+ years experience in general valve and automation preferred. HS Diploma or GED required. Specialized skills training/certification may be required. The perks of working here… Tuition Reimbursement Competitive Pay 401K + match Employee Referral Program FloWorks Cares Charity Program Environmental Job Requirements Usually in a comfortable environment but with regular exposure to factors causing moderate physical discomfort from such things as heat, dust, fumes, and/or odors. Must continuously stand or walk or regularly requires lifting/handling/carrying material or equipment of moderate weight (up to 50 pounds). Occasional overnight travel could be required. This information indicates the general nature and level of work performed by associates in this role. It is not designed to contain a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this role. This description supersedes any previous or undated descriptions for this role. Management retains the right to add or change the duties of the position at any time. Questions about the duties and responsibilities of this position should be directed to the reporting Manager or Human Resources. FloWorks is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or protected veteran status. FloWorks is committed to fostering a culture where every individual is valued and empowered to contribute to a shared success. FloWorks participates in the US Government's E-Verify program.

Job DescriptionAbout Core Focus: Core Focus Personnel, LLC is a Staffing, Training, and Logistics company serving Alabama's automotive and manufacturing industries. Field Service TechnicianSchedule: Full-TimeJob Summary: We are seeking a reliable and hardworking Field Service Technician to join our team. This role involves performing a variety of industrial cleaning and maintenance services, including hydro-blasting, lancing, pressure washing, jetting, storm drain cleaning, vacuum truck operations, emergency response cleanup, environmental spill cleanup, and industrial tank cleaning.Technicians may work in diverse and potentially hazardous environments, including confined spaces and elevated areas, while adhering to all company, client, and regulatory safety standards.Responsibilities: Perform field service operations such as hydro-blasting, vacuum truck operation, and industrial cleaning. Assist with environmental and emergency response cleanup tasks. Safely operate and maintain equipment and tools. Follow OSHA, MSHA, and company safety policies and procedures at all times. Work effectively in a team environment and communicate clearly with supervisors and coworkers. Requirements: Must possess a valid driver's license. Willingness to work overtime as needed. Willingness to travel for work assignments as required. Must be able to pass a background check and pre-employment drug screening. Must be authorized to work for any employer in the United States. Comfortable working in all outdoor elements and weather conditions. Must comply with OSHA and MSHA regulations, as well as company and client safety policies. Able to lift to 50 lbs. and perform physical tasks including climbing, bending, and reaching. #cfp

Field Technician Salary: $18.50$24.50 No Experience Required Sign-On Bonus: $250 Join Our Team! Ready to build a career with meaningful growth, strong support, and great pay? Do you have the desire to work hard and build a stable career at an Employee-Owned company? Tired of not being able to pay your bills on time and differentiate yourselves from team members that dont perform like you do? If so, now is the time to join the Satellites Unlimited (SUI) family as a Field Technician! This entry-level satellite TV and broadband installer role is ideal for individuals with mechanical aptitude and good communication & customer service skills. * Quick Apply: Takes less than 10 minutes on our website * Watch what its like to be part of the team:

Job Title: Field Service Technician - I Department: Field Service Reports To: Customer Performance Manager FLSA Status: Non-Exempt APPLY TODAY Why Work Here? We have the best in class technology & services and seek the best talent to join our collaborative team in our drive for excellence! VETERANS WELCOME Overview: Our Field Service Technicians provide first line maintenance for ATMs, perform limited repairs and preventive maintenance on a variety of financial equipment, perform project and installation support as needed, and work on PC and PC peripheral equipment. Individuals responding to this position must have the ability to use basic hand tools including but not limited to multi-meter, volt-meter, volt-ohm meter and must have basic PC/network knowledge. Essential Duties and Responsibilities include the following, but not limited to: Prioritizing and planning service calls Adhere to service operating procedures Troubleshooting, diagnosing, and resolving product performance issues Identify and resolve problems in a timely manner by gathering and analyzing information skillfully, developing alternative solutions Take ownership of your assigned territory and meet service performance goals Meets productivity standards, quality metrics, administrative tasks and duties in a timely manner Ensure above and beyond professional customer service in all situations Responds promptly to customer needs, meets customer commitments, and solicits feedback from the customer Updating call status to reflect an estimated time of arrival (ETA) and providing resolutions and updates as required Working with local service team and service management team to reassign calls as required Timely and accurate reporting of service updates and call closure information to the call center Escalation of issues to the service management team as required Follow material control processes in support of assigned responsibilities (keys, combinations, alarms, parts inventory, etc.) Organize and utilize technical documentation in support of job responsibilities Actively participate in equipment maintenance and supply sales lead program Participate in special background checks based on customer requests Supervisory Responsibilities: this job does not have supervisory responsibilities Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education and/or Experience Strong electromechanical and/or mechanical skills with a minimum of 2 years of technical services experience or equivalent education required; Must have computer and network experience; ATM repair, equipment and maintenance experience preferred. A+ certification along with Customer service experience preferred. Job Skills, Requirements: Competent with a computer and Windows application Experience with downloading and up grading software Troubleshooting, diagnosing, and resolving product performance issues Maintains professional confidentiality and patience with customers and within the workplace Uses reason and implements solutions while managing difficult or emotional customer situations and topics Maintain a professional attitude and demeanor to foster positive customer relationships Professional communication in speaking with and listening to customers Critical thinking, quick decision making, and using reason while dealing with emotional topics Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals as well as the ability to write routine reports and correspondence Speaks clearly and persuasively in a positive manner even in negative situations Clear verbal and written communication, effective listening, asks for assistance and clarification when needed Ability to deal with a variety of concrete variables in situations where only limited standardization exists Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form Ability to build, maintain, and contribute to a positive team workplace Have and maintain a clean and valid motor vehicle record and driver's license Travel schedule coordination skills Up to 50% overnight travel as required by the needs of the business Prolonged travel with driving several hours per day to service locations Flexible schedule to accommodate rotating and weekend shifts, over-time and on-call as needed Ability to work weekends and holidays Dependable and consistent attendance ensuring work duties are covered when absent Bancsource Perks & Benefits include: Competitive Pay Bi-weekly Bonus potential PTO Package, and Paid Holidays Comprehensive Health, Dental, and Vision Insurance Free Medical plan option for employee HSA and FSA Health Care Accounts 401k Savings Plan with Employer Match Company Paid Life Insurance Company Vehicle, Fuel and Credit Cards for Expenses Company Provided Cellphone, Tablet, Laptop Employee Assistance Program On Going Learning & Development Training Who We Are Bancsource is a nationwide maintenance service (technology) provider to over 1,200 banks and retailers. The key technology serviced includes ATM's, Smart safes, ITM's, teller cash recyclers, core connected technology, branch solutions, outsourcing, managed services and other banking technology. The company is based in Springfield, Missouri and has been operating for more than 40 years. Bancsource services all major OEM equipment for mission-critical customer systems including ATM's, smart safes, drive-up systems, vaults, and sorters. Bancsource is an equal opportunity employer. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is of the Safety Sensitive nature and on a daily basis requires that the individual operate machinery and various hand tools, drive a company vehicle, and interact with customers on commercial premises. While performing the duties of this Job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; sit; bend; use hands to finger, handle, or feel and reach with hands and arms, repetitive grasping and manipulating objects of varying size and weight. The employee is occasionally required to climb or balance and stoop, kneel, crouch, squat, or crawl. The employee must occasionally lift and/or move up to 100 pounds of tools, parts, and/or equipment. Specific vision abilities required by this job include the ability to adjust focus. This position requires fine motor skills and hand-eye coordination. Per upcoming OSHA Emergency Temporary Standards, announced September 9th, 2021, COVID-19 Vaccination will be required to be eligible for employment.

Based out of Granbury, Texas, BC Tech Pro partners with techs all over the country to complete on-site hardware warranty services in their territories. If you love working on computers and want to get out from behind a desk, come work with us! Job Description This is a Computer Field Technician Position doing hardware repairs and installations on laptop and desktop units. To be successful in this position, you must have prior experience with laptop and desktop hardware. Job Details: This is a 1099/per call position Pay is based solely on the number of calls completed. Calls start at $35 and go up based on distance traveled Pay period: Every Friday after the first week worked Tickets are run Monday-Friday during the day shift. Candidates must be regularly available a minimum of 3 weekdays to be considered. Call volume is variable but is usually 2-4 calls per day You will complete certifications from Dell and Lenovo as part of your onboarding. Certifications are online and free to you. You must have a reliable form of transportation and a valid driver's license to run these calls. You will be visiting multiple work sites throughout your day. You must have access to a computer and the Internet to log onto your portal each day. You must be available to log into your tech portal each morning you are working by 9 am to code your calls and map out your route for the day. The manufacturer has completed troubleshooting and shipped a part prior to your ticket being issued to you. You will confirm service times with the customer in your tech portal. Services will be completed at the customer site (residential and commercial) You will pick up parts daily from the assigned Fed Ex or UPS store for your territory before going onsite. Once all calls are completed for the day drop off the old parts with the pre-paid label that is provided. Qualifications Must have prior hands on experience with replacing components on laptops and desktops Must have a valid driver's license and reliable transportation Must be comfortable with daily local travel Additional Information All your information will be kept confidential according to EEO guidelines.

We are growing and are thrilled to be recruiting in the Birmingham, AL area. Joining a team in our Breast & Skeletal Health you will be responsible for preventative maintenance, repairs and servicing of our innovative medical imaging and interventional products. As a Hologic FSE, you travel to our customer sites to ensure our products are calibrated and optimized for high performance. You will be able to build relationships with our customers, putting them at ease that you are there to investigate and solve any technical issues. Summary Of Duties And Responsibilities * Responsible for the installation and service of Hologic products (mammography, digital mammography, bone densitometry, and mini c-arms) which include electrical, mechanical and software components. * Establish and maintain a high level of customer satisfaction with Hologic's products, support and service. * Complete all remedial service actions, standard system checks, and required hardware and software upgrades in accordance with approved policies and procedures. * Assist other Field Engineers as necessary. * Maintain a good customer service reputation by complying with all regulatory requirements and all aspects of DQSM. * Complete and submit all required paperwork on time and accurately. * Train customers on the basic operation and use of Hologic products. * Provide feedback to the District Manager concerning product performance anomalies encountered in the field, and make recommendations for service improvements. * Provide support at conventions, trade shows and customer trials. * Provide pre and post sales support by maintaining close working relationships with sales and customers to ensure expectations are met and equipment installations are handled as planned. * Manage inventory, keep accurate records, and return unused and failed parts promptly. * Promote service contract offerings and assist the local Service Sales Specialist in selling service agreements to customers within your assigned territory. * Manage the assigned territory in an organized fashion. * Perform PM's on time, provide expeditious on-site response and minimize equipment downtime. * Respond to customer inquiries in written form (with managerial approval), in person, or via telephone as needed. * Escalate customer issues and unresolved product problems to service management in a comprehensive and timely manner. Qualifications * Must be a self-starter, able to travel and work independently with minimal supervision. * Must be capable of multi-tasking, setting priorities and scheduling work activities. * Ability to resolve problems, think analytically and communicate professionally in high pressure, time sensitive, customer environments. * Willing to work flexible hours and overtime on short notice. * Position requires the ability to be "on call" after normal working hours. * Depending on location, position may require frequent overnight travel. * Must have reliable transportation, possess a valid driver's license, and carry adequate auto insurance. * High degree of mechanical aptitude. * Excellent communications skills, both written and verbal are required Education * Associate's Degree or equivalent in electronics, computer science or related technical discipline is required. Experience * 2-4 years experience in a field service position working with customers to resolve problems related to x-ray, digital imaging or related medical equipment preferred. * Experience designing, installing, or maintaining computer networks highly desirable. Specialized Knowledge * Strong computer literacy. * Must be proficient with DOS and Windows, certified training and/or working knowledge of UNIX /NT/Solaris or other software operating systems preferred. The annualized base salary range for this role is $63,900 to $100,000 and is bonus eligible. Final compensation packages will ultimately depend on factors including relevant experience, skillset, knowledge, geography, education, business needs and market demand. Agency And Third Party Recruiter Notice Agencies that submit a resume to Hologic must have a current executed Hologic Agency Agreement executed by a member of the Human Resource Department. In addition, Agencies may only submit candidates to positions for which they have been invited to do so by a Hologic Recruiter. All resumes must be sent to the Hologic Recruiter under these terms or they will not be considered. Hologic's employees are subject to third-party COVID-19 vaccination requirements, including from customers and governmental entities. Hologic is an equal opportunity employer and consistent with federal, state, and local requirements, will consider requests for reasonable accommodation based on disability or sincerely-held religious beliefs where it is able to do so without undue hardship to the company. Hologic, Inc. is proud to be an Equal Opportunity Employer inclusive of disability and veterans. Same Posting Description for Internal and External Candidates #LI-MG3

Are you ready to begin your journey towards a rewarding career in the environmental field? Does protecting the environment and gaining hands-on experience as an Environmental Field-Testing Technician interest you? Apply today! You'll get great hands-on experience, travel to exciting customer locations within your region (with expenses covered), and enjoy the great outdoors! This is a great opportunity in a recession-proof industry where the sky is the limit! As an Environmental Field-Testing Technician, you will have the opportunity to learn and advance within our rapidly growing company while simultaneously obtaining an education on the industrial processes that we serve. Benefits to the Environmental Field-Testing Technician role include a clear and progressive career path, upward mobility, PTO, and great benefits that kick in the month following your start date. Environmental Field-Testing Technician Info: Alliance Technical Group provides the full spectrum of services to support our customers' environmental needs, and ultimately, helps protect the environment. We are currently hiring enthusiastic, adventurous, science or mechanically minded individuals who have the desire to obtain valuable work experience and learn on the job. In this role, you will have the unique opportunity to gain exposure to a variety of industrial processes, and travel to various customer locations typically in your region/state, with all travel expenses paid. The work is conducted safely outdoors, on emissions source platforms, often at elevated heights, so you must love being outside. Starting pay rate is $20-$22 per hour, with generous quarterly profit-sharing bonuses and plenty of overtime available. In addition, you'll receive a great benefits package, paid time off, and the ability to receive referral bonuses. Duties & Responsibilities: In this important position, you will conduct Stack Emissions Testing including equipment preparation, deployment, staging/breakdown, sample collection and recovery. During our comprehensive training process, you will learn the following responsibilities, and once experienced, have the opportunity for rapid advancement: Conduct on-site field testing in a professional manner and transport testing equipment to customer sites Follow all test methods, procedures, and processes for quality source testing Apply careful mechanical and electrical skills while troubleshooting testing systems Qualifications: Must have a valid driver's license Enjoy being outdoors, working safely in all weather conditions Ability and desire to climb stairs and ladders and work at elevated heights Degree in environmental, engineering, or mechanical sciences, or related experience skill and ability is highly preferred Experience related to environmental response/sample collection, mechanical, construction, or electrical work is helpful and preferred Experience with or strong aptitude to learn the use of the MS Office Suite (Word, Excel, Outlook) & Adobe products Ability and desire to be on your feet, lift equipment up to 75 pounds, climb ladders or stairs and work at elevated heights and use tools or equipment requiring a high degree of dexterity Ability to distinguish between shades of color is critical for safety Employee Benefits: Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub In compliance with applicable Pay Transparency laws, Alliance Technical Group provides a range of compensation for job postings within locations that have these requirements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. The pay range for this entry-level role is $20-$22 per hour. Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #FIELDSERVICES

Telecommunication Technician - MSO-EPC The Mobile Switching Office-Evolved Packet Core (MSO-EPC), also known as the Southern Linc Network Operations Center (NOC), is the critical 24 x 7 x 365 monitoring and resolution facility. The primary responsibilities of the position are to provide network monitoring, 1 st level troubleshooting, documentation, and problem resolution for the Southern Linc LTE/4G wireless network. Successful candidate will participate in, coordinate and assist with providing system upgrades, capacity increases, emergency system restoration deployments, storm preparation and response, performance optimization and support the operational efficiency efforts of Southern Linc Wireless. Candidate will provide assistance to support any future build-out work for the Southern Linc LTE/4G network to include centralized Core infrastructure and RAN components, AC/DC power, and other facility-related needs. Candidate will work as part of a team on rotating shifts. These shifts include some nights, weekends and holiday work as the Operations Center is a 24 x 7 operation. JOB REQUIREMENTS A.S Degree in Computer Science, Electronics, Digital Telecommunications, Data Networking or 3 or more years of technology industry work experience. AC/DC power experience and knowledge highly desired. Working experience with enterprise-level power rectifiers, inverters and UPS preferred. Facilities knowledge of cabling techniques and standards, HVAC operation, fire suppression systems and security monitoring systems a plus. FCC, TCP/IP, Cyber Security and or other data networking certifications are desirable. Knowledge and experience with installing, maintaining and or troubleshooting legacy TDM transport networks and or data networks is preferred. Ericsson LTE Evolved Packet Core network experience with various tools, including ENM, Alarm Status Matrix, Alarm List Viewer, as well as Ericsson LTE RBS RAN experience with various tools, including, Element Manager, AMOS is preferred. Experience with traffic analysis tools, such as NetScout, to identify faults and failures in network and end-user experience is desired. Field Operations and or central switch office experience preferred. Strong and proven technical problem-solving skills. Ability to work and thrive within a team-oriented work environment. Able to work on a rotating shift work schedule including some nights, weekends and holidays. Very minimal travel requirements. Limited to training opportunities and the occasional off-site meeting. Work location is primarily in-office. Occasional teleworking, as a portion of the shift schedule, a possibility. JOB RESPONSIBILITIES Monitor, evaluate, resolve and/or escalate service impacting issues for the Southern Linc LTE network. Assist with future buildouts of the Linc LTE/4G Network, including RAN field implementation, transport and networking testing/verification and central Core network expansion. Provide 1st level identification, troubleshooting, resolution and/or escalation to Network Specialists or vendors for MPLS and TCP/IP data networks and connectivity, Ericsson MiniLink microwave remote troubleshooting. Implement software configuration changes, replace faulty networking hardware, update maintenance logs, support switch room by installing/removing equipment & cabling, as well as server platforms. Provide network connectivity wiring in the central Core, implement software configuration changes, as well as provide assistance for system installations, capacity increases, and upgrades of various types. Provide tactical expertise to execute scheduled network changes system wide. Manage the workforce trouble ticketing system (create, assign, track, document, update and close). Make effective use of monitoring and testing tools and applications to support various aspects of the LTE network to identify system failures, minimize service affecting problems, and maximize service availability. Review network performance statistics for system health to identify marginal problems, make daily decisions on break-fix resolution on these issues, dispatch remote personnel to repair when required. Operate a variety of communications and network test equipment including vendor-specific software tools, TCP/IP testing, data monitoring, and network sniffers. Remotely troubleshoot and dispatch appropriate field operations and/or third-party vendors to resolve LTE RAN cell site issues. Generate and analyze reports, charts and alarms to identify and provide solutions to issues/trends. Working with Systems Engineers and Analysts, provide installation assistance for facilities, such as data and RF cabling, AC/DC power and equipment/rack installation needs. Offer solutions and coordinate communication between field technicians, technical customer support, Operating Companies, critical customers, and telecommunications vendors. Work as part of team executing storm/major event preparation and response. Practice Test TECH test: Online Products Login Page (eei.org) Click on "EEI Practice Test" on the right-hand side; a new window to the Edison Electric Institute© website will open. Use the following information to log into the site to access the practice test: Name: southern Password: testing Practice tests: TECH - Technician Occupations

CUI Cable is seeking a skilled and dedicated Cable Technician to join our team. As a Cable Technician, you will be responsible for providing exceptional installation, relocation, troubleshooting, and auditing services for internet, cable, telephone, and alarm systems at our customers' premises. Cable experience is a requirement for this position, and we will provide you with a work truck to carry out your duties effectively. Responsibilities: Perform installations, relocations, troubleshooting, and audits of internet, cable, telephone, and alarm services at customer premises. Adhere to company installation policies to ensure high-quality service delivery. Operate and maintain tools and equipment properly, organizing and stocking the company vehicle with necessary equipment to fulfill job requirements. Prepare and maintain accurate time logs, reports, and related documentation in accordance with company and departmental policies. Requirements: Proficiency in using basic broadband installation tools and hand tools. Ability to lift objects weighing up to 80 lbs., work at heights up to 30 ft., and in confined spaces, including attics. Comfortable working both indoors and outdoors, adapting to different environments as necessary. Possession of a valid driver's license and a satisfactory driving record. Successful completion of thorough background checks and drug screenings. Flexibility in work schedule, including availability to work weekends. Minimum age requirement of 23 years or older. Employee Compensation and Benefits: At CUI, we prioritize your preferences and offer a range of options to suit your needs. We provide both W2 and 1099 employee options with competitive wages, ensuring your success and satisfaction. As part of our commitment to your professional growth, we promote from within and offer advancement opportunities throughout your career journey. Additionally, we offer an attractive list of benefits: Sign on Bonus: $500 - $1,500 dependent on amount of training needed Comprehensive benefit package, including health, vision, and dental coverage. 401k retirement plan with a company match. Company vehicle and gas card for work-related transportation. Weekly pay schedule. Monthly bonus potential. Pay increase after the first year. Paid holidays. Uniforms provided. Company cell phone. Optional Benefits Waived Program: If you own a late model white truck/van and do not require medical benefits, you may be eligible for our Benefits Waived program. Speak with a recruiter for more details. About CUI Cable Services: CUI Cable Services is a leading provider of solutions for multiple system operators (MSOs) in the telecommunications industry. Since 2001, we have been delivering exceptional services, exceeding industry standards. As a registered minority-owned and veteran-owned business, we pride ourselves on practicing our Core 4 values of Honesty, Integrity, Teamwork, and Quality. These values shape our company's culture, drive our decisions, and inspire us to continuously improve and provide the best possible experience for our employees, customers, and partners. Hiring Process: Our efficient hiring process ensures a smooth transition into your future career. Here are the steps involved: Application review and phone screening: Our recruiters will review your application and conduct a phone screen to discuss the job description and your work experience. In-person interview: If selected, you will be invited for an in-person interview with our branch managers. Pre-employment screening: Upon accepting the job offer, you will undergo a pre-employment drug screening and a nationwide background check. Start date: After successful completion of the screening process, we will coordinate your start date. If you are looking to start your career in the cable industry, join the CUI team and become part of our dedicated workforce. Apply today and embark on a rewarding journey with opportunities for professional advancement and personal fulfillment. Join our team at CUI Cable Services and embark on a rewarding career in the telecommunications industry.