Field technician jobs in Huntsville, AL - 177 jobs

JOB SUMMARY: Action Environmental is currently looking for field technicians for our growing office. This position will require a hardworking, hands-on, safety conscious work ethic. Technicians are responsible for providing cleaning, vacuum, flushing, and blasting services in the following industry types: power plants, steel manufacturing, transportation, plastics, food and beverage, utilities, pharmaceuticals, pulp & paper, paints & coatings, wire & cable, oil refining, chemicals, seed production. DUTIES AND RESPONSIBILITIES: Participate in practical and manual activities on a daily basis. Adhere to all policies, procedures, and guidelines to ensure that health and safety standards are achieved, including but not limited to wearing all protective safety equipment Engage in strenuous physical labor including lifting, pulling and pushing heavy objects Operate light and heavy equipment including, but not limited to: blasting equipment, vacuum trucks and hoses, etc May require work in confined spaces, elevated spaces, hot, wet, cold, and foul smelling environments through an 8-12 hour shift while holding the various sizes of vacuum hoses. Work in environments with Hazardous Materials and excessive noise levels Work extended hours, evening, and weekend work, as well as work out of town for extended periods of time, when mandatory. Because of the emergency response and operational nature of the position, a continuing condition of employment is that this position acknowledges and agrees to be on-call 24 hours a day, 7 days a week, 365 days a year and on occasion will require work during weekends and holidays Additional duties as assigned EXPERIENCE AND SKILL REQUIREMENTS: Must be able to pass DOT Medical and Pulmonary Fit Tests Consistently demonstrate safe working practices required Ability to read and write in English is required Maintain a valid driver's license and maintain a clean driving record to drive company vehicles Must have a working cell phone and answer phone or respond to work within 15 minutes Ability to work extended hours, weekends, holidays and out of town Ability to lift up to 75 pounds and perform strenuous physical labor in various work environments

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military

Field Tech- Power Systems Technicians or NETA Technicians are expected to perform service, test and maintain various types of power transmission and distribution equipment. Inspect, test, troubleshoot, perform start-up and collect data of low, medium and/ or high voltage (to 500kV) electrical systems. Install, commission, test, and maintain protective relaying equipment, including relay panels, transformers, and circuit breakers. Develop and document standardized commissioning, testing, and maintenance procedures for relay systems. Perform functional testing of substation control circuits to validate proper relay operation. Create relay macros and testing routines to confirm system protection and control configurations. Execute end-to-end relay testing with specialized software, identifying relay behavior based on fault conditions. Review relay settings and logic equations to ensure alignment with design requirements. Low, Medium and/ or High voltage switchgear and circuit breaker testing Perform inspection, maintenance, testing and repair of transformers, circuit breakers and all related equipment - 45 KVA to 130 MVA, dry type and/ or oil filled. Perform maintenance, testing, reconditioning and repair on circuit breakers - low voltage 480 volt (molded case and air-magnetic) medium voltage up to 15 KV (air-magnetic and vacuum) Experience filling and working with SF6 filled equipment and gas insulated switchgear, desired but not required. Test and inspect low and medium voltage cable installations. Experience operating high voltage test equipment including Doble Power Factor test sets. Perform start-up, troubleshooting and repair services on controls and transfer schemes. Rotate emergency on-call duty and if called respond to customer emergencies in a timely manner. All work and decisions shall be conducted in strict compliance of all regulatory laws. Other duties as assigned by manager. Required Experience and Qualifications for a Field Tech: High School diploma/GED and minimum 1 year of experience in a related field. Knowledge of various industry standards such as: NETA, NEC, OSHA and NFPA. Prefer experience with most of the following or similar: MCC's, Breakers, relay testing, oil testing, infrared scanning, performing start-up on switchgear up through 500kV class, etc. or training from the military (Army Prime Power, Air Force Electrical Power Production, NAVY or another related program). Must be able to work safely and adhere to all electrical safety procedures. Good theoretical understanding of electricity and a good aptitude for problem solving. Effectively communicate verbally and in writing with customers and peers. Dependable and responsible with good judgment and organizational skills. Good customer service, time management and follow-up skills. Work effectively with customers, peers and management to resolve client issues. Strong computer skills with working knowledge of Windows and Microsoft Office- use of Internet for standards/products/manufacturer research For positions that utilize a company vehicle, will be required to have a valid driver's license. Required Experience and Qualifications for a Sr. Field Tech: High School diploma/GED or equivalent experience and 5 years of experience in a related field. Knowledge of the National Electrical Code and various industry standards, such as NETA, OSHA, IEEE and NFPA. Strong background and experience in most types of high voltage equipment through the 230 kV class. Prefer experience with most of the following or similar: MCC's, Breakers, relay testing, oil testing, infrared scanning, performing start-up on switchgear up through 500kV class, etc. or training from the military (Army Prime Power, Air Force Electrical Power Production, NAVY or another related program) Complete projects consistently on budget and at a reasonable contribution. Ability to complete on-site job reports. Valid driver's license required. Required Experience and Qualifications for a Power Systems Tech II: High School diploma/GED and minimum 2 years of experience in a related field. NETA Level II Certification. Power Systems Tech II performs testing and service work while generally requiring direct supervision. The individual has sufficient knowledge and experience to be qualified for assuring the safety of him/herself. Safety knowledge includes an understanding of lockout/tagout procedures and requirements, arc-flash and shock hazard analyses, and other facets of hazardous electrical energy control procedures. Prefer experience with most of the following or similar: MCC's, Breakers, relay testing, oil testing, infrared scanning, performing start-up on switchgear up through 500kV class, etc. or training from the military (Army Prime Power, Air Force Electrical Power Production, NAVY or another related program). Knowledge of various industry standards such as: NETA, NEC, OSHA and NFPA. Must be able to work safely and adhere to all electrical safety procedures. Good theoretical understanding of electricity and a good aptitude for problem solving. Effectively communicate verbally and in writing with customers and peers. Dependable and responsible with good judgment and organizational skills. Good customer service, time management and follow-up skills. Work effectively with customers, peers and management to resolve client issues. Strong computer skills with working knowledge of Windows and Microsoft Office- use of Internet for standards/products/manufacturer research For positions that utilize a company vehicle, will be required to have a valid driver's license. Required Experience and Qualifications for a Power Systems Tech III: High School diploma/GED and minimum 5 years of experience in a related field. NETA Level III Certification. Power Systems Tech III performs testing and service work and can mentor, lead level I and level II Techs as directed by Supervisor/Manager. This position is responsible for performance and management of routine and moderately complex tasks and projects, record keeping, evaluation of test data, and responsibility for the safety of others. This position is qualified to provide guidance and can perform electrical power switching. Prefer experience with most of the following or similar: MCC's, Breakers, relay testing, oil testing, infrared scanning, performing start-up on switchgear up through 500kV class, etc. or training from the military (Army Prime Power, Air Force Electrical Power Production, NAVY or another related program). Knowledge of various industry standards such as: NETA, NEC, OSHA and NFPA. Must be able to work safely and adhere to all electrical safety procedures. Good theoretical understanding of electricity and a good aptitude for problem solving. Effectively communicate verbally and in writing with customers and peers. Dependable and responsible with good judgment and organizational skills. Good customer service, time management and follow-up skills. Work effectively with customers, peers and management to resolve client issues. Strong computer skills with working knowledge of Windows and Microsoft Office- use of Internet for standards/products/manufacturer research For positions that utilize a company vehicle, will be required to have a valid driver's license. Required Experience and Qualifications for a Power Systems Tech IV: Associate degree in related field or equivalent experience and minimum 5 years of experience or 10 years of related experience. NETA Level IV Certification. Power Systems Tech IV performs testing and service work and can mentor, lead level I and level II and level III Techs as directed by Supervisor/Manager. This position is responsible for performance and management of routine and moderately complex tasks and projects, record keeping, evaluation of test data, and responsibility for the safety of others. This position is qualified to provide guidance and can perform electrical power switching. Position, as directed, supervises large projects and multiple crews and can work independently. Individual performs complex investigations, tests, and evaluations, and prepares written reports as needed. Prefer experience with most of the following or similar: MCC's, Breakers, relay testing, oil testing, infrared scanning, performing start-up on switchgear up through 500kV class, etc. or training from the military (Army Prime Power, Air Force Electrical Power Production, NAVY or another related program). Knowledge of various industry standards such as: NETA, NEC, OSHA and NFPA. Must be able to work safely and adhere to all electrical safety procedures. Good theoretical understanding of electricity and a good aptitude for problem solving. Effectively communicate verbally and in writing with customers and peers. Dependable and responsible with good judgment and organizational skills. Good customer service, time management and follow-up skills. Work effectively with customers, peers and management to resolve client issues. Strong computer skills with working knowledge of Windows and Microsoft Office- use of Internet for standards/products/manufacturer research For positions that utilize a company vehicle, will be required to have a valid driver's license. Who we are! RESA Power is a dynamic, people first organization that prides itself on being the employer of choice in its industry! RESA is fortunate to have an extraordinarily talented group of people who take pride in everything they do! RESA Power has locations throughout the United States & Canada. We are a trusted service provider committed to ensuring the safety, performance, and compliance of electrical distribution systems. With a track record of long-term partnerships and excellence in customer experience for nearly a decade! Our Mission Ensure reliable and safe mission-critical power across our customers' electrical infrastructure lifecycle. Our Vision To be the premier, first-choice, trusted provider in the US and Canada for critical power services and products by delivering the best customer and employee experience in the industry. Core Cultural Competencies We do it right We pride ourselves on our integrity and expertise. We don't cut corners. You perform job responsibilities safely, efficiently, and thoroughly all day, every day. You conduct yourself professionally, ethically, and honestly. You display sound judgment and decision-making skills. You avoid choosing courses of action that assume unreasonable risk to yourself or the Company. You are on time and preplan time off. You produce a quality product. We are customer driven Our number one concern is our customer and our long-term relationships with them prove our dedication. You approach job responsibilities with enthusiasm, professionalism, and in a customer focused manner. You promote goodwill by handling all contacts (example: coworkers, management, vendors, customers, etc.) with respect, courtesy, cooperation, attentiveness and follow instructions from management. We focus on growth We are dedicated to growing the company and our employees. You understand and apply your knowledge of techniques, policy, procedures, equipment, and skills involved in the job. You seek out new assignments and assume additional duties. You seek to expand your abilities (certifications, continuing ed, OTJ experience, etc.). We solve problems Every day is different, so we need to be innovative, decision makers, flexible and adaptable. You efficiently and thoroughly complete assignments. You perform work assignments independently. You propose new ideas and find better ways of doing things. We get it done We are efficient, reliable and no nonsense. We work hard, but we also play hard. You follow through on commitments in a timely way. You produce easily understandable and accurate reports that meet customer and/or Company expectations. You actively listen. You seek advice and help as appropriate. You can effectively deliver messages to a variety of individuals (RESA employees, vendors, customers, etc.). We build strong relationships Our leaders are servant leaders. We provide you with the support of a well-run company, but the connectedness of a family. We collaborate with each other and our customers. You collaborate to create the best solutions for each other and our customers. You build strong relationships within the team, across RESA departments and locations and with customers and vendors. Additional Information: Job: Full-Time Location: Nationwide US Huntsville, AL Travel: Up to 50% travel. Compensation: Pay range for a Field Tech/Power Systems Tech I to a level IV range from $25 to $65 (depending on skillset, certification, and experience) per hour and eligible for overtime. Daily meal and incidentals per diem available when traveling for overnight work. Relocation: Available for highly qualified candidates. Application Details: The position will stay open until filled - seeking one temporary employee. Apply via job postings on job boards or from the company website. Physical Demands: Lifting a maximum of 50lbs on a daily, crawling, climbing, standing for long periods of time, and working in non-ideal conditions. RESA Power is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, or veteran status.

The Control Systems Field Engineer directly supports the Government customer and conducts inventories of Control Systems at locations under the organization's purview. The preferred candidate will be well-versed in common Control Systems Architecture design principles and possess operational knowledge of standard Control System processes. In this role, the candidate is expected to work with minimal guidance, in a cross-functional team, ensuring reports and recommendations are effectively communicated and actioned to support the Government customer and the mission requirements. The work is performed in both office and field environments and requires the candidate to facilitate meetings, training, and develop briefing material for senior leadership. Principal Duties and Responsibilities: Candidates will serve as the primary point of contact during all phases of the inventory. Responsible for leading onsite inventory activities, producing highly detailed inventory information of FRCS, ICS, and SCADA systems. Ability to professionally execute an inventory, including but not limited to development of specified project deliverables, technical reports, executive summaries, trip reports, general correspondence, and other reporting requirements as directed by the Government customer. Ability to effectively communicate with stakeholders from various organizations, internal and external to the Army, as well as delivering technical briefings to stakeholders and executive leadership. This position requires works under limited supervision and is expected to take individual initiative in planning and performing work. Must have above foundational understanding of operational technology to understand the mission requirements. Ability to articulate the Purdue Model and how it is implemented. Ability to read and interpret Flow Diagrams and as built drawings Reading and reviewing Electrical schematics for Control Systems Troubleshoots TCP/IP, Modbus, OPC, and network communications issues (can vary greatly depending on SCADA system and protocols in use). Suggests Control System replacement (end of life, policy requirements, etc.) and assists stakeholders and the Government customer with recommendations for upgrades and/or replacement. Performs data analysis of events or processes to help identify and make (automation) suggestions to resolve and prevent future issues. Interfaces with multiple teams and stakeholders as well as the Department of Public Works (DPW) and the Department of Emergency Services (DES) Plant DCS, OSI PI team, and Scheduling team Provides training and support to all team members on the program. Responsible for supporting and guiding control systems inventory team members during inventories. Ensures optimal team performance while adhering to standardization and data normalizations guidelines. Job Specifications: High School or equivalent. Bachelor's degree preferred. 4-6 years of related work experience required. Ability to interpret network topologies, data flow diagrams, and other system/network schematics. Expert-level knowledge of desktop applications including MS Word, Excel, and Outlook. Strong written and oral communication skills, detail oriented, strong organizational skills. Proven ability to multi-task and prioritize responsibilities. Excellent attention to detail and diligent adherence to deadlines and deliverables. A high-level performer with the ability to be proactive and respond rapidly to changing conditions in a fast-paced environment. Requires at least 25% travel to CONUS and OCONUS sites. The Control Systems Analyst may be exposed to construction sites, electrical, loud noises, fumes, odors, insects, snakes, poor ventilation, and extreme temperatures. Must be able to stand, walk, climb stairs and ladders, drive, and lift up to 50 pounds. Will require a valid Passport. Other duties as assigned. Requires working on-site and travel Active Secret clearance Preferred Qualifications: Demonstrated knowledge of Control Systems or Operational Technology, including FRCS, ICS, SCADA. Understanding of control system software (Wonderware, ICONICS, FactoryTalk Studio, etc.). Demonstrated knowledge of Building Automation Systems (Niagara, Metasys, Trane, WebControl) (Not all inclusive). Certifications: Control System specific certifications/certificates GIAC Security Essentials Certification GIAC Global Industrial Cyber Security Professional (GICSP)

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs competent break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to determine root cause of problem; dismantling devices to gain access to and remove defective parts; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; and performing troubleshooting and repair of electrical circuitry and mechanical systems. · Identifies parts, supplies and repair items as necessary for equipment maintenance and repair. · With minimal instruction, performs maintenance as per industry standards. · Works with customer counterparts to execute maintenance, reliability, and preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Conforms and complies with customer contractor codes of conduct, housekeeping standards, and safety processes · Documents work performed in service reports, and applicable management systems. · Performs routine processes with and within industrial control systems to troubleshoots and analyzes complex equipment, perform equipment maintenance, and to resolve equipment problems. · Utilizes in-depth application of electrical, mechanical, and fluid power aptitude to troubleshoot and repair equipment. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 5 years of related experience in specific industry; or, 7 years of experience in specific industry. · Must be able to use basic hand tools and specialized tools as appropriate. · Possesses working knowledge and experience regarding electrical, mechanical, and fluid power systems in related fields. Can analyze the problems, synthesize alternative solutions, and perform repairs · Extensive travel required. (Local, National, International). Desirable KSAs: · Experience in preventative maintenance techniques, precision measuring, mechanical alignments, and general maintenance of applicable process equipment. · Exposure to programmable logic controllers, field devices, and electrical drive and motor systems. Competencies: · Communications · Customer Focus · Personal Discipline · Safety Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Field Technician Salary: $18.50$24.50 No Experience Required Sign-On Bonus: $250 Join Our Team! Ready to build a career with meaningful growth, strong support, and great pay? Do you have the desire to work hard and build a stable career at an Employee-Owned company? Tired of not being able to pay your bills on time and differentiate yourselves from team members that dont perform like you do? If so, now is the time to join the Satellites Unlimited (SUI) family as a Field Technician! This entry-level satellite TV and broadband installer role is ideal for individuals with mechanical aptitude and good communication & customer service skills. * Quick Apply: Takes less than 10 minutes on our website * Watch what its like to be part of the team:

Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Morris South is a division of Morris Group, Inc. We supply CNC machine tools, tooling, accessories, software, automation, and more to manufacturers of precision machined parts. Our customer base is located in the southeast U.S. We serve manufacturers in Alabama, Arkansas, Georgia, Mississippi, North Carolina, South Carolina, Tennessee, and Virginia. Our mission is to help manufacturers from all industry sectors achieve and maintain a competitive advantage by improving productivity. We help you make better parts, less expensively. Summary of Responsibility: The Field Service Technician is responsible for the installation, repair and maintenance of machine tool equipment, controls (Fanuc, Siemens, etc.) and other components purchased by customers. This position works independently to ensure the highest level of quality and customer service satisfaction. What You Will Contribute: Traveling to customer sites to install, troubleshoot, repair and maintain all machine tool equipment and controls for customer organizations Utilizing machine tool manuals, technical documents, internal and vendor resources to research machine issues Ensuring proper documentation is completed and submitted to office and customer in regards to status of machine issues, repairs, and installation Promoting and performing preventative maintenance on customer machine tool equipment and conducting after-sales technical support and training Possessing and maintaining an in-depth knowledge of machine tool industry and product lines represented by the company Other Function Perform related duties as required The duties listed above are intended only as an illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. Qualifications & Competencies: Five years' experience with CNC machine repair Experience with Microsoft Office Suite and other business programs as required Ability to read and interpret drawings and schematics is required Excellent technical, communication, and presentation skills are necessary Must be able to meet the physical requirements of the job including flexible hours and frequent travel and driving throughout a regional territory What's in it for You: We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: • Competitive starting salary • Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance • 3+ Weeks' Vacation to Start • 10 Company Paid Holidays • 401(k) retirement plan with company contribution • Tuition reimbursement • Employee appreciation events and perks • Employee Assistance Program Mental and physical requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be highly mobile, able to access all areas of the premises. • Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects. • Ability to sit for prolonged period of times. • Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees. • Ability to frequently use hands and arms. • Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. • Ability to keep their composure with the public and co-workers in everyday, stressful situations. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. Requisition #1435B, Huntsville AL

Pull, install, terminate and test CAT 6 and fiber optic cabling Prepare/install cable pathways and supports Running new cabling in new or existing spaces: CAT5e, CAT6, and 10gig 2 Testing/Troubleshooting network issues (Connectivity, other Low Voltage Cable associated issues) Connects wires and cables to terminals, and attaches/detaches various kinds of hardware to wires, cables, buildings, and poles Build closets (Mount and install backboards, cross connects, 66 Blocks, racks, patch panels, fiber optic and hardware) Perform MDF and IDF build outs Cable Technician Requirements: Ideally 1-2 years of experience installing structured cable and performing terminations and punch down work Technicians should have prior experience installing telecommunication frames/support structures (cabinets, trays, racks, wall mounts, ladder racks, j-hooks, etc) Operate test equipment to include: tones, twisted pair, checkers butt set, and cable scanners (Fluke DTX1800) Experience working structured cabling projects with multiple drops Excellent people skills, communication skills, and self-management skills Ability to perform strenuous physical activities including, but not limited to: lifting objects weighing over 75 pounds Technicians should have all basic cabling tools. Top Secret Clearance

The Customer Service Engineer - is an intermediate position that performs tasks related to the repair of a variety of technology-based products typically associated in an end-user computing environment. Responsibilities • Performs basic and moderately complex troubleshooting and repair activities, typically associated in an end-user environment, including but not limited to PC's, desktops, laptops, tablets and printers. • Provide support to client identified VIPs • Responds to change management requests including installing new PC equipment, providing end-user desk side support and other related activities. • Perform Install/Move/Add or Change (IMAC) activities. • Perform all assigned desk-side support activities • Display outstanding technical and professional services skills at all times • Meet - established customer service satisfaction levels and other operational/customer service metrics as outlined in established guidelines • Proactively communicate with the end-user and service desk personnel regarding arrival times, repair time estimates and status of the repair • Understands and follows all documented service operations policies and procedures. • Other duties or certifications may be assigned to meet business needs Education and Experience: • Typically requires technical school certification or equivalent of 2-4 years of relevant experience Certifications and/or Qualifications: • Maintain all required OEM Certifications as directed by Management • Knowledge of relevant software and hardware systems • Understanding of ITIL methodologies • A+ certification is desired • May require additional customer-specific certifications or training as required Skills: • Excellence in communication and customer-facing skills • Strong oral, written and interpersonal skills • Ability to follow instructions and processes with minimal instruction • Ability to lift and or move various computer equipment up to 50 lbs. • Must own a basic repair kit Additional requirements may exist if offer of employment is extended

FIELD SERVICE ENGINEER FOR MEDICAL IMAGING DEVICE Are you ready to join one of the biggest names in Healthcare Technology Management? Are you ready to be part of something special... This is your opportunity to get in the door as we EXPLODE in growth! If you are energetic and passionate --> YOU NEED TO APPLY Who We Are: Founded by Philip Revien and Michael Fischer in 2014, 626 provides maintenance expertise on all medical technology equipment manufacturers and modalities. Philip and Michael first met in the maternity ward of a South Florida hospital on June 26, 2012, the day each of their sons were born. The vision for 626 (a tribute to their sons' birth dates) was also born that day. The pair began talking and soon realized they shared a common goal- improving patient care. Two years later, 626 was established. What began as two men in a garage, 626 now employs more than 100 employees nationwide and has emerged as one of the fastest-growing third-party company in the healthcare technology management market. What You'll Do: MUST HAVE PRIOR EXPERIENCE IN MEDICAL IMAGING DEVICE SERVICE AND REPAIR Summary/ Objectives Provider of medical imaging repair and maintenance seeks an experienced Service Engineer to maintain, and repair MRI/CT -MUST HAVE THIS SKILL SET AND EXPERIENCE!!! PET is a plus Thrives to provide technical support and troubleshooting assistance with equipment and maintain a high quality of customer satisfaction. Essential Responsibilities Assist in the repair of diagnostic imaging equipment specific to MRI/CT or high-level electro-mechanical background Must be a self-starter, able to travel and work independently with minimal supervision Ability to resolve problems, think analytically, and communicate professionally in high-pressure, time-sensitive, customer environments Perform Scheduled preventative maintenance that includes calibrations and verifications of system specifications. Learn and gain knowledge of imaging equipment in order to perform preventative maintenance on machines. Accurately document all service activities in accordance with the Company Quality Standards. Assess, calibrate, and maintain test equipment Submitting field service reports timely and according to functional standards. Communicate with account manager on services being provided. Manage and Maintain company assets required to perform all necessary job functions. Supervisory Responsibility There are no supervisory responsibilities for this role Work Environment This job operates in the field where the individual will be going to several different sites to and will be around a variety of medical imaging equipment. Work Schedule Primarily Monday thru Friday normal business hours occasional evening and weekends. Physical Demands The physical requirements that are essential to perform this job are to talk and to hear. It will also be required by the employee to frequently stand; walk, lift up to 75 Lbs., to use hands to handle or feel; and reach with hands and arms. Competencies Ability to follow procedures and instructions/direction. Ability to work well with others. Communication Proficiency. Business Acumen. Customer Service Skills. Travel This position requires frequent and regular travel as needed to service the technical needs of customers. The individual in this position must be willing to travel and drive distances to get to a variety of sites within a 4 hour radius. Some travel and assignments will require flying and overnight stays. Benefits: • 401(k) • 401(k) matching • Dental insurance • Health insurance • Health savings account • Life insurance • Paid time off • Vision insurance Education and Experience · Must have formal training and field experience in one of the following that applies X-ray, mammography, ultrasound, MRI, PET, CT, injectors, · High School Diploma or GED Required · Some College or Degree Preferred 626 Holdings, LLC and 626 AWI, LLC provides employment opportunities to all individuals regardless of race, color, age, religion, sex (including pregnancy and gender identity), national origin, sexual orientation, marital status, disability or genetic information. Please note that this job description is not a complete and comprehensive list of duties and responsibilities that are required of the employee. A responsibility or duties can or will change at any time with or without notice. Job Type: Full-time

n Logic is seeking a highly skilled Army Metering Program Field Service Representative responsible for optimization of an energy program's metering and control systems, and for training Energy Specialists on those systems. The FSR works with the Facilities and Maintenance Directors to address mechanical and control issues for buildings. Duties Include: Provide customer support and work with the project engineers, other system engineers, and end-users, to assist in developing cost-effective methods for an efficient Utility Controls design and system solution. Work with essential/key team members to understand their systems requirements to ensure the correct IP infrastructure, points list, critical alarms, and scaling set points are integrated as designed. Properly address TCP/IP networks and RS-485 communications across multiple protocols including BACnet, Lon, Modbus, and others. Follow QA procedures to ensure quality control performed by others is properly implemented throughout projects. Write detailed daily reports pertaining to jobsite milestones. Perform inspections and testing of Utility Control Systems to ensure proper functionality. Coordinate project work internally within the department and externally with other departments to ensure all projects are completed on time. Provide on-site system assistance on a commercial or military system. Provide technical assistance with regard to daily operations, system upgrades, and preventative maintenance of military systems. Resolve operational and technical deficiencies within the system. Monitor daily system operations to ensure system performance and data requirements meet specifications. Identify, order, receive, and track parts. Update, refine, maintain, and deliver training material. May serve as a technical liaison between corporate departments, government customer, vendors, and others. May provide leadership to lower-level employees. Additional duties may be assigned based on customer or contractual requirements Required Skills and Experience: High school diploma or equivalent. Eight years of related work experience required. Ability to obtain/maintain SECRET Security Clearance; US Citizenship required. Ability to clearly present and communicate technical approaches and findings. Ability to travel to CONUS and/or OCONUS customer sites. Strong written and oral communication skills, detail oriented, strong organizational skills. Proven ability to multi-task and prioritize responsibilities. Excellent attention to details and diligent adherence to deadlines and deliverables. Experience with MS Office, Excel, Word, Visio, and PowerPoint. Ability to troubleshoot and resolve onsite issues. Ability to act independently and to coordinate the work of other employees and contractors on a customer site. Knowledge/understanding of Utility Control Systems. Understanding of electrical and mechanical schematic diagrams, control diagrams, prints, building operations, and electrical theory. Knowledge of ICS, SCADA, BMS, PLC and Metering systems and how they operate. Preferred Qualifications: Bachelor's degree or higher in a related field preferred. Field service experience, preferably with the following programs/software: Metasys, Niagara, Rockwell Factory Talk; Tridium; Schneider Electric: Powerlogic/Struxureware; Siemens: Apogee; Ignition: Inductive Automation; Eaton Networks; Field Servers; Jace Controllers; Bacnet. Ability to integrate Sensors and peripheral devices. Ability to program Points and Tags in the HMI. Ability to update firm ware on devices. Candidate must be a U.S. Citizen. This position requires a SECRET Security Clearance. This is a full-time position that is fully onsite located at Huntsville, AL.

CUI Cable is seeking a skilled and dedicated Cable Technician to join our team. As a Cable Technician, you will be responsible for providing exceptional installation, relocation, troubleshooting, and auditing services for internet, cable, telephone, and alarm systems at our customers' premises. Cable experience is a requirement for this position, and we will provide you with a work truck to carry out your duties effectively. Responsibilities: Perform installations, relocations, troubleshooting, and audits of internet, cable, telephone, and alarm services at customer premises. Adhere to company installation policies to ensure high-quality service delivery. Operate and maintain tools and equipment properly, organizing and stocking the company vehicle with necessary equipment to fulfill job requirements. Prepare and maintain accurate time logs, reports, and related documentation in accordance with company and departmental policies. Requirements: Proficiency in using basic broadband installation tools and hand tools. Ability to lift objects weighing up to 80 lbs., work at heights up to 30 ft., and in confined spaces, including attics. Comfortable working both indoors and outdoors, adapting to different environments as necessary. Possession of a valid driver's license and a satisfactory driving record. Successful completion of thorough background checks and drug screenings. Flexibility in work schedule, including availability to work weekends. Minimum age requirement of 23 years or older. Employee Compensation and Benefits: At CUI, we prioritize your preferences and offer a range of options to suit your needs. We provide both W2 and 1099 employee options with competitive wages, ensuring your success and satisfaction. As part of our commitment to your professional growth, we promote from within and offer advancement opportunities throughout your career journey. Additionally, we offer an attractive list of benefits: Sign on Bonus: $500 - $1,500 dependent on amount of training needed Comprehensive benefit package, including health, vision, and dental coverage. 401k retirement plan with a company match. Company vehicle and gas card for work-related transportation. Weekly pay schedule. Monthly bonus potential. Pay increase after the first year. Paid holidays. Uniforms provided. Company cell phone. Optional Benefits Waived Program: If you own a late model white truck/van and do not require medical benefits, you may be eligible for our Benefits Waived program. Speak with a recruiter for more details. About CUI Cable Services: CUI Cable Services is a leading provider of solutions for multiple system operators (MSOs) in the telecommunications industry. Since 2001, we have been delivering exceptional services, exceeding industry standards. As a registered minority-owned and veteran-owned business, we pride ourselves on practicing our Core 4 values of Honesty, Integrity, Teamwork, and Quality. These values shape our company's culture, drive our decisions, and inspire us to continuously improve and provide the best possible experience for our employees, customers, and partners. Hiring Process: Our efficient hiring process ensures a smooth transition into your future career. Here are the steps involved: Application review and phone screening: Our recruiters will review your application and conduct a phone screen to discuss the job description and your work experience. In-person interview: If selected, you will be invited for an in-person interview with our branch managers. Pre-employment screening: Upon accepting the job offer, you will undergo a pre-employment drug screening and a nationwide background check. Start date: After successful completion of the screening process, we will coordinate your start date. If you are looking to start your career in the cable industry, join the CUI team and become part of our dedicated workforce. Apply today and embark on a rewarding journey with opportunities for professional advancement and personal fulfillment. Join our team at CUI Cable Services and embark on a rewarding career in the telecommunications industry.

Based out of Granbury, Texas, BC Tech Pro partners with techs all over the country to complete on-site hardware warranty services in their territories. If you love working on computers and want to get out from behind a desk, come work with us! Job Description This is a Computer Field Technician Position doing hardware repairs and installations on laptop and desktop units. To be successful in this position, you must have prior experience with laptop and desktop hardware. Job Details: This is a 1099/per call position Pay is based solely on the number of calls completed. Calls start at $35 and go up based on distance traveled Pay period: Every Friday after the first week worked Tickets are run Monday-Friday during the day shift. Candidates must be regularly available a minimum of 3 weekdays to be considered. Call volume is variable but is usually 2-5 calls per day You will complete certifications from Dell and Lenovo as part of your onboarding. Certifications are online and free to you. You must have a reliable form of transportation and a valid driver's license to run these calls. You will be visiting multiple work sites throughout your day. You must have access to a computer and the Internet to log onto your portal each day. You must be available to log into your tech portal each morning you are working by 9 am to code your calls and map out your route for the day. The manufacturer has completed troubleshooting and shipped a part prior to your ticket being issued to you. You will confirm service times with the customer in your tech portal. Services will be completed at the customer site (residential and commercial) You will pick up parts daily from the assigned Fed Ex or UPS store for your territory before going onsite. Once all calls are completed for the day drop off the old parts with the pre-paid label that is provided. Qualifications Must have prior hands on experience with replacing components on laptops and desktops Must have a valid driver's license and reliable transportation Must be comfortable with daily local travel Additional Information All your information will be kept confidential according to EEO guidelines.

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military

Pull, install, terminate and test CAT 6 and fiber optic cabling Prepare/install cable pathways and supports Running new cabling in new or existing spaces: CAT5e, CAT6, and 10gig 2 Testing/Troubleshooting network issues (Connectivity, other Low Voltage Cable associated issues) Connects wires and cables to terminals, and attaches/detaches various kinds of hardware to wires, cables, buildings, and poles Build closets (Mount and install backboards, cross connects, 66 Blocks, racks, patch panels, fiber optic and hardware) Perform MDF and IDF build outs Cable Technician Requirements: Ideally 2-5 years of experience installing structured cable and performing terminations and punch down work Technicians should have prior experience installing telecommunication frames/support structures (cabinets, trays, racks, wall mounts, ladder racks, j-hooks, etc) Operate test equipment to include: tones, twisted pair, checkers butt set, and cable scanners (Fluke DTX1800) Experience working structured cabling projects with multiple drops Excellent people skills, communication skills, and self-management skills Ability to perform strenuous physical activities including, but not limited to: lifting objects weighing over 75 pounds Technicians should have all basic cabling tools. Top Secret Clearance

The Customer Service Engineer - is an intermediate position that performs tasks related to the repair of a variety of technology-based products typically associated in an end-user computing environment. Responsibilities • Performs basic and moderately complex troubleshooting and repair activities, typically associated in an end-user environment, including but not limited to PC's, desktops, laptops, tablets and printers. • Provide support to client identified VIPs • Responds to change management requests including installing new PC equipment, providing end-user desk side support and other related activities. • Perform Install/Move/Add or Change (IMAC) activities. • Perform all assigned desk-side support activities • Display outstanding technical and professional services skills at all times • Meet - established customer service satisfaction levels and other operational/customer service metrics as outlined in established guidelines • Proactively communicate with the end-user and service desk personnel regarding arrival times, repair time estimates and status of the repair • Understands and follows all documented service operations policies and procedures. • Other duties or certifications may be assigned to meet business needs Education and Experience: • Typically requires technical school certification or equivalent of 2-4 years of relevant experience Certifications and/or Qualifications: • Maintain all required OEM Certifications as directed by Management • Knowledge of relevant software and hardware systems • Understanding of ITIL methodologies • A+ certification is desired • May require additional customer-specific certifications or training as required Skills: • Excellence in communication and customer-facing skills • Strong oral, written and interpersonal skills • Ability to follow instructions and processes with minimal instruction • Ability to lift and or move various computer equipment up to 50 lbs. • Must own a basic repair kit Additional requirements may exist if offer of employment is extended

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Morris South is a division of Morris Group, Inc. We supply CNC machine tools, tooling, accessories, software, automation, and more to manufacturers of precision machined parts. Our customer base is located in the southeast U.S. We serve manufacturers in Alabama, Arkansas, Georgia, Mississippi, North Carolina, South Carolina, Tennessee, and Virginia. Our mission is to help manufacturers from all industry sectors achieve and maintain a competitive advantage by improving productivity. We help you make better parts, less expensively. Summary of Responsibility: The Field Service Technician is responsible for the installation, repair and maintenance of machine tool equipment, controls (Fanuc, Siemens, etc.) and other components purchased by customers. This position works independently to ensure the highest level of quality and customer service satisfaction. What You Will Contribute: Traveling to customer sites to install, troubleshoot, repair and maintain all machine tool equipment and controls for customer organizations Utilizing machine tool manuals, technical documents, internal and vendor resources to research machine issues Ensuring proper documentation is completed and submitted to office and customer in regards to status of machine issues, repairs, and installation Promoting and performing preventative maintenance on customer machine tool equipment and conducting after-sales technical support and training Possessing and maintaining an in-depth knowledge of machine tool industry and product lines represented by the company Other Function Perform related duties as required The duties listed above are intended only as an illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. Qualifications & Competencies: Five years' experience with CNC machine repair Experience with Microsoft Office Suite and other business programs as required Ability to read and interpret drawings and schematics is required Excellent technical, communication, and presentation skills are necessary Must be able to meet the physical requirements of the job including flexible hours and frequent travel and driving throughout a regional territory What's in it for You: We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: • Competitive starting salary • Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance • 3+ Weeks' Vacation to Start • 10 Company Paid Holidays • 401(k) retirement plan with company contribution • Tuition reimbursement • Employee appreciation events and perks • Employee Assistance Program Mental and physical requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be highly mobile, able to access all areas of the premises. • Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects. • Ability to sit for prolonged period of times. • Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees. • Ability to frequently use hands and arms. • Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. • Ability to keep their composure with the public and co-workers in everyday, stressful situations. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. Requisition #1501B, Hartselle AL

CUI Cable is seeking a skilled and dedicated Cable Technician to join our team. As a Cable Technician, you will be responsible for providing exceptional installation, relocation, troubleshooting, and auditing services for internet, cable, telephone, and alarm systems at our customers' premises. Cable experience is a requirement for this position, and we will provide you with a work truck to carry out your duties effectively. Responsibilities: Perform installations, relocations, troubleshooting, and audits of internet, cable, telephone, and alarm services at customer premises. Adhere to company installation policies to ensure high-quality service delivery. Operate and maintain tools and equipment properly, organizing and stocking the company vehicle with necessary equipment to fulfill job requirements. Prepare and maintain accurate time logs, reports, and related documentation in accordance with company and departmental policies. Requirements: Proficiency in using basic broadband installation tools and hand tools. Ability to lift objects weighing up to 80 lbs., work at heights up to 30 ft., and in confined spaces, including attics. Comfortable working both indoors and outdoors, adapting to different environments as necessary. Possession of a valid driver's license and a satisfactory driving record. Successful completion of thorough background checks and drug screenings. Flexibility in work schedule, including availability to work weekends. Minimum age requirement of 23 years or older. Employee Compensation and Benefits: At CUI, we prioritize your preferences and offer a range of options to suit your needs. We provide both W2 and 1099 employee options with competitive wages, ensuring your success and satisfaction. As part of our commitment to your professional growth, we promote from within and offer advancement opportunities throughout your career journey. Additionally, we offer an attractive list of benefits: Sign on Bonus: $500 - $1,500 dependent on amount of training needed Comprehensive benefit package, including health, vision, and dental coverage. 401k retirement plan with a company match. Company vehicle and gas card for work-related transportation. Weekly pay schedule. Monthly bonus potential. Pay increase after the first year. Paid holidays. Uniforms provided. Company cell phone. Optional Benefits Waived Program: If you own a late model white truck/van and do not require medical benefits, you may be eligible for our Benefits Waived program. Speak with a recruiter for more details. About CUI Cable Services: CUI Cable Services is a leading provider of solutions for multiple system operators (MSOs) in the telecommunications industry. Since 2001, we have been delivering exceptional services, exceeding industry standards. As a registered minority-owned and veteran-owned business, we pride ourselves on practicing our Core 4 values of Honesty, Integrity, Teamwork, and Quality. These values shape our company's culture, drive our decisions, and inspire us to continuously improve and provide the best possible experience for our employees, customers, and partners. Hiring Process: Our efficient hiring process ensures a smooth transition into your future career. Here are the steps involved: Application review and phone screening: Our recruiters will review your application and conduct a phone screen to discuss the job description and your work experience. In-person interview: If selected, you will be invited for an in-person interview with our branch managers. Pre-employment screening: Upon accepting the job offer, you will undergo a pre-employment drug screening and a nationwide background check. Start date: After successful completion of the screening process, we will coordinate your start date. If you are looking to start your career in the cable industry, join the CUI team and become part of our dedicated workforce. Apply today and embark on a rewarding journey with opportunities for professional advancement and personal fulfillment. Join our team at CUI Cable Services and embark on a rewarding career in the telecommunications industry.

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military