Field technician jobs in Pasco, WA

Job Title: Field Service Technician Reports to: Equipment Supervisor Pay: Salary is based on experience and geographic location. Antigo, WI- $25.52-$30.62 Idaho Falls, ID- $23.85-$28.62 Pasco, WA- $27.30-$32.76 Fresno, CA- $27.30-$32.76 Monte Visto, CO- $25.52-$30.62 Job Summary The Field Service Technician is responsible for performing field and in-house service work for customers, the installation and set-up of new machines, and ensuring customer satisfaction by performing high quality work in a timely manner. Service work includes installation, repair, and maintenance of electrical, mechanical, computer, and industrial systems and controls of mechanical equipment located in production settings. Essential Duties Install, maintain, and repair electro-mechanical equipment. Travel to customer locations throughout North America to perform installations, maintenance, and repairs to electro-mechanical equipment. Prepare and test all equipment before equipment is shipped to customers to ensure proper functioning and operation. Load and unload equipment at Volm and customer facilities. Train customers and operators on proper use of equipment sold and serviced by Volm Companies. Troubleshoot and diagnose issues with equipment utilizing technical manuals, schematics, and diagnostics tools, visually and by sound. Conduct phone service support on an “on-call” basis. Document all installation and service work performed in a timely manner including expense reports, service reports, time sheets, etc. Continuously identify opportunities for process improvement and cost reduction. Required Skills and Abilities Ability to obtain and maintain a valid US passport or passport card preferred. Developed understanding and use of mechanical, electrical, and electronic systems, including PLC and VFD controls. Ability to accurately read and interpret mechanical, electrical, and hydraulic drawings, schematics, and diagrams. Strong critical thinking, troubleshooting, and analytical skills. Ability to read and follow oral and written instructions. Ability to handle stress and successfully perform in a fast-past environment. The ability to establish priorities, work independently, and proceed with objectives without direct supervision. Adaptability and flexibility to embrace new skills. Proven ability to work collaboratively in a team environment. Strong time management skills for efficient task allocation and meeting deadlines. Meticulous attention to detail in completing tasks and maintaining high-quality standards. Education and Experience Knowledge of mechanical and electrical standards and practices normally acquired through completion of a technical certificate or equivalent combinations of education and experience. Established experience working with material and resource planning systems, spreadsheets, word processing documents, customer management databases, and other applicable computer systems and data management software preferred. Established experience in electro-mechanical principles, systems, and repair preferred. Journeyman electrician license preferred. Established experience building and maintaining strong customer service relationships preferred. Physical Requirements Ability to stand, walk, and move around for extended periods of time. Capability to lift and carry objects of various weights, ranging from light office supplies to heavy machinery components. Proficiency in using hands, fingers, and arms for tasks such as typing, writing, operating machinery, assembling products, etc. Sufficient visual acuity to read documents, operate equipment, and recognize details at close and distant ranges. Ability to hear and understand verbal communication, as well as detect warning signals or equipment malfunctions. Endurance to withstand prolonged periods of physical activity or work shifts, particularly relevant for manufacturing roles that involve repetitive tasks. Ability to move quickly, easily, and with coordination to navigate through tight spaces, react swiftly to changing work conditions, and perform tasks that require agility. Flexibility to bend, stoop, and reach low or high objects, particularly relevant for jobs that involve material handling or maintenance tasks. Capability to climb ladders, stairs, or scaffolding, as required in certain manufacturing or construction environments. Ability to perform physically demanding tasks, such as lifting, pushing, pulling, or carrying heavy objects. Good hand-eye coordination and motor skills for tasks that require precision, such as operating machinery or using hand tools. Adaptability to work in varying environmental conditions, such as temperature extremes, noise, dust, or fumes, depending on the nature of the job. Willingness to adhere to safety protocols and wear protective gear, including helmets, goggles, gloves, and safety shoes, as required by the job. Company Culture & Values A Commitment to Our Purpose (COMMITTED PEOPLE) - Our mission is to serve and build up our customers, suppliers, communities, and each other, guided by the principles of our Lord Jesus Christ. The commitment to serving and building up is easily seen in those employees that exemplify this value. Without Our Customers We Are Nothing (CUSTOMER FIRST) - We realize that we are blessed to serve our customers and without them, our company does not exist. They rely on us for their success and that is a responsibility we cannot take lightly. Our focus must be on serving them with as seamless communication and access to products as possible. Kind, Humble and Positive (HUMBLE) - These positive traits do not mean being a doormat to others. But when a person is kind, humble and positive it comes through in their genuine caring for those around them. A Desire For “Expert” (EXPERTS) - Our people want to be seen as the experts in their specific roles. From how we convert a bag efficiently and with highest quality, to knowledge of the product portfolio, to desiring to know more about tax or human resource policy - the desire for “expert” drives us in each of our roles. Intentional Growth - Developing of Self and Others (PERSONAL GROWTH)- Times, tools, and customer expectations change. Our team members are interested in developing themselves and those around them. We know that a stronger team is one that makes our customers and our fellow employees happier. Strong Work Ethic (HARD WORKERS) - The commitment to serve those around us is honorable and we respond to this by putting our strongest effort into that purpose. High Expectations of Self and Others (HIGH EXPECTATIONS) - We expect ourselves, and those around us, to put in our best effort. When others struggle, we help them align towards perfection. When we struggle, we are open and humble to hear it and course-correct accordingly. If It Isn't Safe, We Don't Do It (SAFETY) - All people deserve to return home to their loved ones safely and work in an environment where they can best execute their tasks safely. When choosing between safety and profit, safety and efficiency, safety and feelings, safety, and “x” - we choose safety. Travel Requirements This is a field-based role that requires frequent overnight travel, up to 75% of the time. Driver Qualification The ability to drive a company owned/leased vehicle or personal vehicle on behalf of the company is preferred. Inclusion in the company's driver qualification program is required to drive a company owned/leased vehicle or personal vehicle. Becoming a qualified driver includes: Agree to the company driving policies that apply to company owned/leased vehicle or personal vehicle as applicable. Possess and maintain a valid driver license and be a minimum of 21 years of age. Maintain an acceptable driving record, as evidenced by completion of a baseline motor vehicle record check and ongoing monitoring. When driving a personal vehicle on behalf of the company, must provide a copy of the declaration page from personal auto insurance that shows the policy dates and minimum coverage amounts ($300,000 bodily injury per accident/$100,000 property damage per accident or if driving less than 5 hours/200 miles a year $50,000 bodily injury per accident/$10,000 property damage per accident or the state minimum, whichever is more). This requirement is initially and then annually thereafter. This job description is intended as a general outline of the primary responsibilities of the position. It is not intended to be an exhaustive or comprehensive list of all duties, responsibilities, or activities that may be required. The employer reserves the right to modify, add, or remove any responsibilities, duties, or activities as deemed necessary with or without notice. Volm Companies is an equal opportunity employer and is committed to providing reasonable accommodation to qualified individuals with disabilities and other protected characteristics. If you require reasonable accommodation to perform the essential functions of the job, please inform us and we will work with you to address your needs. Benefits As a family-owned and operated company, we offer a comprehensive benefits package designed to support you and your family. We offer a strong foundation of benefits, including access to medical, dental, and vision coverage, an HSA employer contribution, and a 401k with profit sharing to secure your future. To support your overall well-being and family life, we offer additional benefits beyond the core package, such as paid vacation, wellness stipends, childcare reimbursement assistance, and much more. We are committed to continuously enhancing our benefits to meet the evolving needs of our team.

This position is responsible for performing contracted routine services for customers under supervision. Fields of service are limited to "Power Systems" products that include, but are not limited to, electric power generation (diesel and gas), diesel industrial engines, automatic transfer switches and other system related components. SUCCESS AT WESTERN STATES: Western State's culture is based on passion for our Vision and VALUES. We are fiercely committed to SAFETY and sending every employee, safely home, every day. We strive for EXCELLENCE in all we do and are proud to be a "play to win" organization. We act with INTEGRITY in each and every decision we make. Our People and TEAMWORK drive a fun and engaging culture. We are ACCOUNTABLE as individuals and as an organization. We drive INNOVATION by challenging the status quo and embracing change. ESSENTIAL FUNCTIONS: * Under supervision, performs routine maintenance on generator packages, industrial engine packages, and electric power generation system components, including both Caterpillar and non Caterpillar branded products. * Assists senior technicians with load bank testing including cabling and cable termination. * Performs basic troubleshooting and repairs. * Assists EPG Field technicians and EPG Specialty Field Technicians as required. * Performs detailed inspections on electric power generation and industrial engine products. * Prepares service reports that accurately documents activities, issues and up-sell opportunities. * Prepares required documentation including work orders, parts lists and time cards in an accurate and timely manner. * Conducts business professionally. Maintains self-control and integrity in stressful situations. Maintains a professional image. * Adheres to all customer requirements while on job site. * Adheres to all customer care standards. * Actively cares and advocates safety at Western States. Adhere to all applicable safety policies, procedures and standards. * May accomplish training and serve as a team member in support of Western States' strategic programs, projects, and initiatives. * Work within and promote corporate vision, mission, and values of the organization. * Performs other duties as assigned. KNOWLEDGE SKILLS AND ABILITIES: * Excellent customer service skills. * Ability to work overtime with minimal notice required. * Ability to travel frequently with the potential of overnight stays. * Knowledge and use of Microsoft computer products or other comparable systems required. * Ability to establish and maintain effective working relationships with others to include customers, vendors, employees and the public. * Knowledgeable in electric power generation systems. * Consistent attendance. EDUCATION AND EXPERIENCE: * Proof of high school diploma or General Education Degree (GED). * Associate Degree from an accredited vocational school preferred or comparable work experience required. * 3 years experience with troubleshooting and maintenance methods for "Power Systems" products required. * Must own required tools. * Must meet DOT requirements. * Must be able to communicate (speak, read, comprehend, write in English). PHYSICAL CHARACTERISTICS: * Must be able to stand for long periods of time along with walking, sitting, climbing stairs, reaching pushing, pulling, leaning and twisting. * Able to lift up to 50 lbs in accordance with Western States' Lifting Safe Work Practice to include amount and approach. * Must be able to meet all safety requirements for applicable safety policies. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. It is not intended be an exhaustive list of all responsibilities, duties, and skills required of employees in this classification. This role is designated as safety-sensitive.

Welcome to the intersection of energy and home services. At NRG, we're all about propelling the next generation of leaders forward. We are driven by our passion to create a smarter, cleaner and more connected future. We deliver innovative solutions that make our customers' lives easier-helping them power, protect, and intelligently manage their homes and businesses. To do this, we need creative and talented people to join our company. We offer a dynamic work environment and a unified and inclusive culture. NRG fosters a strong sense of belonging that leads to better collaboration and business performance. Our company programs are designed to help employees develop the skills they need for success now and in the future. In everything we do, we aim to champion our employees and bring value to our customers, investors and society. More information is available at ************ Connect with NRG on Facebook, Instagram, LinkedIn and X. **We are adding to our Field Services Technician team** and looking for motivated, customer-focused, coachable individuals who have a knack for technology and sales. **Why Join Our Technician Team** **?** + Competitive hourly base plus uncapped commission + Comprehensive paid training & Ongoing coaching and support + Company take-home vehicle and gas card + Cell phone and work tablet + We provide all tools necessary to perform the job - We&aposll ship everything to you directly! + 4/10 work schedule with home dispatch (clock in and out from your driveway each day). We pay for your drive time to/from and in-between appointments! **Why Join Vivint** **?** + Ten paid holidays + Two weeks paid time off + Employee pricing on smart home products + Medical/Dental/Vision/Life coverage + 401(k) plan with matching + Career development and leadership opportunities + Fast Company's list of the World's 50 Most Innovative Companies, Forbes named us one of America's Best Employers and a Best Employer for Diversity **A Day** **in** **the Life:** As part of our Field Services Technician team, you'll provide expert-level installation and Servicess of cutting-edge technology. As a technician, you will have the opportunity to maximize your earning potential by leveraging Services and installation appointments into leads and additional revenue. Customers will rely on you to act with honesty and integrity as you offer what they have been looking for - peace of mind. **Who we're looking for:** Our technician team is made up of a wide variety of backgrounds and experience levels. We believe in investing in our employees and provide comprehensive training and support. **_In the state of Washington, the required license is an EL06._** + Exceptional customer Services skills + Sales experience - car sales, retail sales, insurance sales, B2C sales, call center experience + Field technician experience - cable installation, internet Installation, pest control, lawn maintenance, construction, solar technician + Clean driving record and valid license + Someone who thrives in a team environment as well as independently **Physical demands of the job:** + Lift and carry up to 45 lbs. + Climb ladders up to 14 feet + Work in attics and other limited-space areas + Bend, kneel, crouch, and stand for extended periods Safety culture is strong at Vivint. Field Services technicians will conduct a safety analysis of every home to assure a safe workplace for the technician and the customers. The base hourly range for this position is: $33.25 - $44.75* *The base hourly range above represents the low and high end of the hourly range for this position. Actual salaries will vary based on several factors including but not limited to location, experience, and performance. The range listed is just one component of the total compensation package for employees. Other rewards may include annual bonus, short- and long-term incentives, and program-specific awards. In addition, the position may be eligible to participate in the benefits program which include, but are not limited to, medical, vision, dental, 401K, and flexible spending accounts. NRG Energy is committed to a drug and alcohol-free workplace. To the extent permitted by law and any applicable collective bargaining agreement, employees are subject to periodic random drug testing, and post-accident and reasonable suspicion drug and alcohol testing. EOE AA M/F/Vet/Disability. Level, Title and/or Salary may be adjusted based on the applicant's experience or skills. Official description on file with Talent. Vivint, an equal opportunity employer, does not consider any protected traits (e.g., race, creed, color, religion, gender, national origin, non-job-related disability, age, or any other protected trait) when hiring-under federal, state, and local laws. We are a drug-free environment. We do not conduct pre-employment drug screening; however, we do conduct random drug testing on site.

Job Title: Computer Technician - Part-time Work Hours: 4-5 hours per day, preferably AM (Monday - Friday) Reports to: Technology Coordinator Mabton School District is seeking a highly motivated and skilled Computer Technician to provide hands-on technology support for our school district. This individual will handle helpdesk tickets and provide technical assistance to staff, students, and administrators. The role requires on-site troubleshooting, installation, and maintenance of hardware, software, and network systems to ensure smooth technology operations district-wide. Key Responsibilities: * Helpdesk Support: Respond to helpdesk tickets, emails, and phone calls to assist with technical issues. * Troubleshoot and resolve problems related to computers, printers, projectors, and other district technology equipment. * Provide remote and on-site support for staff, students, and administrators. * Hardware/Software Installation and Maintenance: * Install, configure, and maintain operating systems, software applications, and district-wide technology infrastructure. * Perform routine maintenance and updates on desktop and laptop computers, printers, projectors, and mobile devices (e.g., tablets, Chromebooks). * Maintain an existing fleet of student devices, including repairing Chromebooks, check-in/out assigned Chromebooks or loaners as needed on a daily basis, coordinating warranty services, and assessing fines. * Manage storage of unused Chromebooks and ensure necessary parts for repair are kept in stock. * Assist with the deployment of new devices. * Network Support: Assist with basic network troubleshooting, including Wi-Fi connectivity, network printing, and device connections. * Work with the district's IT team to identify and resolve network-related issues. * Inventory Management: Maintain and update records of hardware and software inventory. * Assist in managing district-wide technology assets, ensuring proper documentation and tracking of equipment. * Classroom Technology: Provide technical support for classroom technology such as interactive boards, document cameras, sound systems, and other instructional tools. * Train staff on using classroom technologies as needed. * System and User Account Management: * Assist with the creation, management, and troubleshooting of user accounts, permissions, and access for various systems (e.g., Google Workspace for Education, Microsoft Office 365, etc.). * Support users with password resets and account recovery. * * * Other Duties: * Assist with technology setup and support for school events, meetings, and presentations. * Provide technical assistance during state assessments and testing sessions. * Support special technology projects as assigned by the Director of Technology. * Collaborate with the IT team to continually improve district technology services and systems. Qualifications: * Education: High school diploma or equivalent required. An associate degree in Information Technology or a related field is preferred. * Experience: Minimum of 1-2 years of experience in IT support, helpdesk, or a related technical support role. Experience in an educational environment is a plus. * Technical Skills: * Proficiency in troubleshooting Windows, iOS, and Chrome OS. * Knowledge of hardware components, peripheral devices, and common software applications. * Familiarity with basic networking concepts (e.g., IP addresses, Wi-Fi connectivity, DNS, DHCP). * Experience with ticketing systems and remote desktop support tools. * Soft Skills: * Excellent communication and customer service skills. * Ability to work independently and prioritize tasks. * Strong problem-solving and analytical skills. * Attention to detail and the ability to document issues and solutions clearly. Preferred Certifications: * CompTIA A+, Network+, or equivalent certifications are a plus. Physical Requirements: * Ability to lift and move equipment up to 50 pounds. * Ability to crawl, bend, and reach to access network cabling and equipment. Wage:$22.23 - $25.97

Job DescriptionSalary: $30 - $40 / hour DOE WEMCO is looking for an experienced and motivated Field Service Technician capable of working with minimal supervision. This position will be based out of the Tri-Cities. Job Purpose: Under the general supervision of WEMCO Inc.s Part Sales & Services Manager, the Field Service Technician will be a front-line employee with direct customer contact. Your primary purpose will be to maintain and repair the heavy equipment used in all construction, agriculture, mining, logging, materials handling, and related industries with a focus on overhead crane service and inspection. Job Responsibilities: Reports directly to the Sales & Service Manager Acts as the primary customer support contact to diagnose and execute complex mechanical and electrical repairs to cranes and material handling equipment at the customers site Establishes and continually develops productive customer relations and ensures prompt and efficient attention to customer needs Creates and fills out forms using inspection software to document work completed, supplies used, findings and recommendations Applies the use of specialized tools to work efficiently; Technician will also be required to procure and use their own set of hand tools WEMCO will not supply these WEMCO will supply specialty equipment, tools, and training including, but not limited to; Laser shaft alignment tools Vibe Check Balancing equipment for large hoist applications VFD and PLC software and computer High-pressure wire rope lubrication equipment Magnetic flux leakage tester for wire ropes Fluke Power Analyzer - for checking and recording power events on cranes and buildings Motor Meggers WEMCO supplied rope guide spring tools AT402 laser tracker equipment for site rail surveys. Company-calibrated load cells and test weights Aerial lift and fall protection training Obtains product technical issue information and utilizes available resources, including data management tools, balancing the timeliness of customer response with investigation efforts. Captures all troubleshooting steps in the reports to ensure seamless transitions and accurate communication with our team members about the service call. Translates customer complaints to; Develop a troubleshooting plan Follow proper workflows and procedures Use mechanical and electronic service tools and other specialized equipment, to troubleshoot equipment issues and diagnose failed components to enable a successful repair Validate repairs by duplicating complaints, ensuring actual equipment issues have been entirely resolved Performs preventative maintenance on hoists and cranes per documented schedules and standards Identifies sales and service opportunities by educating customers about WEMCOs products and services Ensures that all services are completed efficiently, on time, and correctly, according to specification; repairs will be completed at a WEMCO facility or the customers site Diagnoses problems and estimates required repair time so WEMCO support staff can properly quote customer work Completes any necessary training that is in line with both skill and business requirements Maintains WEMCO-owned service vehicle and tools for cleanliness and proper operation Reports any issues or incidents to site management and the Sales and Service Coordinator immediately Takes and reads measurements using various measuring tools; micrometers, calipers, & gauges, to ensure part dimensions, features, and tolerance requirements are met, per print and industry specifications and standards Provides maintenance expertise, troubleshooting, service, and installation on overhead cranes. This work involves mechanical and electrical skills. Our goal is to return cranes to service in a safe and timely manner Tests and commissions new and used equipment in-house as well as in the field Completes paperwork and time cards accurately to comply with our AS9100 and ISO requirements. You must also provide clothing that will protect you from all four seasons' weather conditions WEMCO will never put you at risk in a dangerous weather situation, but we ask that you provide clothing that will protect you from rain and snow Job Requirements: Territories in which service work will be conducted include but are not limited to the Western United States Out of town, overnight work will be required (an average of 10-12 nights per month is what our team averaged in 2024) Minimum of 2-5+ years of prior experience in a related field service role High School Diploma, GED, or vocational diploma from a relevant technical institute is required Prior experience with Microsoft Office products is preferred: Word, Excel, & Outlook PLC operational troubleshooting experience is preferred Must possess a valid drivers license with an acceptable driving record Equipment troubleshooting and diagnostic experience Must be committed to workplace safety, the safety of yourself, your team, and our customers is of the utmost importance Adherence to the zero tolerance drug and alcohol policy. Random drug tests may be required for access to certain job sites. Excellent oral and written communication skills Ability to interact with customers in a positive and professional manner Experience using pneumatic, electrical, and manual tools Intermediate knowledge of assembly materials, metal types, and material properties Ability and willingness to follow all timekeeping procedures and policies All time tracking for jobs must be completed using the BambooHR app on your assigned company phone. This includes: Punching in and out at the start and end of each job throughout the day Recording travel time to and from each job site Accurate and timely time tracking is essential. It ensures: Accurate payroll for all employees Correct invoicing for our customers Physical Demands: The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. This position involves work in our shop and at job sites where work will be performed indoors and outdoors. The employee must frequently lift or move up to 25 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. While performing the duties of this job, the employee is regularly required to sit and stand, walk, use fine finger manipulation, use hands to handle and grasp, reach with hands and arms, and talk or hear. The employee is occasionally required to climb, balance, bend, stoop, twist, and/or crouch. Benefits: 401k Retirement Plan Medical Insurance Dental Insurance Vision Insurance Other Supplemental Insurance Employee Referral Program Paid Time Off Holiday Pay ...and more!

KEY RESPONSIBILITIES • Perform field service troubleshooting and diagnosing, timely repairs, and component installation on all makes and models of our client's equipment. • Diagnose faults or malfunctions to determine required repairs using engine diagnostic equipment such as computerized test equipment and calibration devices. • Working knowledge of reading blueprints, wiring diagrams, schematic drawings, or engineering instructions for assembling electronic units. • Test electrical units, analyze results to evaluate performance and determine need for adjustment. • Test mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturer's specifications. • Manage and maintain all aspects of the customer relationship through open communication and timely follow-up. • Provide customer support and education, working with users to identify needs, determine sources of problems, or to provide information on product use. • Troubleshoot issues and concerns, partnering with other departments and leadership as necessary. • Research, order, and maintain parts inventory for services and repairs. • Read and understand operating manuals, blueprints, and technical drawings. • Maintains condition of mobile service vehicle, parts inventory, tools, and equipment. • Follow all safety rules and regulations while performing work assignments and adhere to all policies and procedures as specified in company work rules. OTHER RESPONSIBILITIES • All other duties as assigned by supervisor/manager ABILITIES • Demonstrates our client's values of Harmony, Fairness and Generosity. • Ability to travel up to 75% of the time (estimated at 3 weeks a month). • Strong communication skills both orally and written, at all levels of the organization. • General computer skills - proficiency with Word, Excel, PowerPoint, Outlook and file sharing preferred. • Basic mathematical skills (add/subtract/multiply/divide and work with decimals and fractions). • Ability to read and interpret documents, including, but not limited to blueprints, operating and maintenance instructions and procedural manuals. • Capacity to manage and prioritize multiple tasks/projects while meeting deadlines and managing time effectively. • Ability to exercise sound judgement and make decisions in a manner consistent with company policies, practices, and culture. • Ability to drive and accept change while being creative and forward-thinking. • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. • Ability to maintain high levels of confidentiality and trust. • Ability to work independently as well as in a team environment. • Working knowledge of hydraulics, pneumatics, diesel engines, electrical, fuel and other systems is preferred. • Capable of meeting and maintaining health and safety guidelines while keeping work area in a clean and orderly fashion. • Working conditions include office and professional as well as work including industrial environments as well as outside temperatures and all-weather conditions. QUALIFICATIONS • Two-year technical school degree in Diesel/Heavy Equipment or related field and/or at least three years or more of mechanical experience is preferred. • Working knowledge of hydraulics, pneumatics, diesel engines, fuel and other systems is preferred. • Must have the ability to obtain or carry a Class A CDL and DOT health card, with a clean driving record • Must have excellent communication skills, both written and verbal and the ability to establish and maintain effective working relationships at all levels of the organization • Demonstrated excellent work-ethic with self-motivation, ability to work safe with no supervision on customer job sites, while maintaining company and customer expectations of thoroughness and customer service • Ability to read and follow intermediate measurements, schematics, and technical documentation • Basic computer skills required using Microsoft Office Suite programs and file sharing

At Safe Haven Security, we are more than just a home security company! We are a team of dedicated professionals who are passionate about making a difference in the lives of our customers and our employees. Our mission is to provide peace of mind and protection to families across the country, and we achieve this by offering cutting-edge security solutions and exceptional customer service. Position Summary Safe Haven Security is looking for an Installation Technician / Security Advisor to join our organization. In the role of Installation Technician / Security Advisor you will play a crucial role in providing best-in-class service to our customers by installing, servicing, and troubleshooting residential alarm and automation systems. Your primary goal will be to ensure the proper functioning and optimal performance of security systems, providing our customers with peace of mind and protection. In this role you will: Perform installation of security alarm systems including control panels, sensors, cameras, and other related equipment. Engaging in sales consultations with customers to understand their needs and recommend appropriate security solutions. Diagnose and troubleshoot technical issues related to the customer's security alarm systems, identifying root cause, and implementing appropriate solutions to ensure proper function. Conduct thorough testing of installed security systems to ensure all components are functioning correctly and make necessary adjustments or repairs. Educate customers on the proper use and functionality of their security alarm systems, ensuring they are comfortable and confident in operating the equipment. Complete all necessary paperwork, including installation reports, service tickets, and inventory records, ensuring accurate and up-to-date documentation of all installations and repairs. Stay updated on knowledge of security alarm systems, emerging technologies, and industry standards in a fast-paced, and demanding work environment. To be successful in this role, you should have: The ability to obtain or possess basic tools necessary for the job duties. Proficient in installing, troubleshooting, and maintaining security alarm systems, including control panels, sensors, cameras, and related equipment. Excellent interpersonal and communication skills to interact with customers in a professional and courteous manner, providing clear instructions and addressing any concerns or questions. Ability to diagnose and resolve technical issues efficiently, utilizing problem solving skills to identify root causes and implement effective solutions. What Safe Haven requires in a candidate: Auto insurance coverage must meet company standards throughout employment. Must be able to obtain or possess an alarm agent permit where applicable and according to Federal, State, and Municipal laws. Must be able to obtain or possess a valid driver's license and driving history must meet company standards throughout employment. High School diploma, or equivalent. Physical requirements of the role: Candidates in the role of Installation Technician / Security Advisor must meet these physical requirements to ensure not only their own safety, but also the quality and reliability of the installations performed. All potential employees will be evaluated for these requirements as part of the hiring process. Sustained periods of standing, climbing on ladders, and maneuvering in tight spaces. Ability to use hand and power tools, and the ability to handle small components accurately. Ability to lift, carry, and position heavy objects up to 50 pounds, potentially overhead or in awkward positions. Keen eyesight for detailed work. Frequent bending, crouching, reaching, and maintaining balance while working on ladders or at elevated heights. Capability to work in diverse indoor and outdoor environments, enduring temperature fluctuations and inclement weather. Ability to drive personal vehicle for long periods of time throughout the day.

Full-time Description SCOPE OF WORK The Department of Energy (DOE) Hanford Site requires general support services for the Waste Treatment and Immobilization Plant Project (WTP). WTP requests one (1) full-time equivalent (FTE) general support contractor (1920 labor hours) to provide support in the following areas: · Provide oversight of contractor system design review program. · Provide oversight of maintenance and work control processes. · Provide support to WTP Engineering Division. · Assist the Nuclear Services Division (NSD) during DOE's review and comment resolution of the Preliminary Documented Safety Analysis (PDSA) and Documented Safety Analysis (DSA) development and revisions performed by the contractor. · Coordinate system design reviews for the WTP HLW systems. · Assist HLW Federal Project Director in the assessment of alternative tank waste treatment approaches (including DFHLW configuration). · Assist the Hanford Interface Management Team with Interface Control Document (ICD). · Coordinate to issue assessment and resolution with ORP engineering, regulatory, and other supporting staff. · Participate in Engineering, Procurement and Construction (EPC), WTP High Level Waste (HLW) assessment progress and Direct Feed High Level Waste (DFHLW) configurations. Work products shall be thorough, accurate, appropriately documented, and comply with established criteria. The Contractor shall ensure that duties are performed in a competent and professional manner. The Contractor employee shall submit a weekly report to the technical monitor addressing work accomplished, and deliverable progress. Requirements QUALIFICATION REQUIREMENTS Contractor personnel shall possess the following minimum qualifications: · Education - BS/BA degree in engineering, or science. · Experience - Six (6) years of directly applicable successful experience as a management consultant or senior manager interfacing and working with organizational executives and senior management, or senior technical or business individuals, within government or industry on significant management, technical, or business issues. · Demonstrate familiarity and relevant experience or ability to perform under Hanford or other government agency procedures. · Working level of knowledge with ORP's oversight program requirements to include ORP's corrective action management process. · Demonstrate familiarity and relevant experience or ability to perform oversight of DOE-ORP Orders/Standards such as facility operations, engineering, maintenance management of a nuclear facility. · Excellent written and oral communication skills · Compliance with site specific safety and security requirements, including badging and office protocols. · Identification of any conflicts, potential conflicts, or perceived conflicts of interest with any Hanford Site contractors. · U.S. Citizenship Salary Description $115 - $125/hour W2

Looking for a new career? Jammies Environmental, Inc. (JEI) is the preferred company to call when our customers - which include some of the largest manufacturers in the PNW - have an industrial cleaning, hydro-blasting, vacuum excavation or industrial waste cleanup need. We also service derailments and other activities associated with railroad operations. While some related experience and skills are preferred, it is not necessary - if you are safety-minded and have a positive attitude and excellent work ethic, we want to talk to you! We will train you to do our highly specialized work, using some of the best industrial service equipment in the nation. JEI continues to grow as a result of our commitment to excellence in safety, quality and customer service. Our employees enjoy being part of a team and have pride in the work they do. Come grow with us! We are looking for a Field Technician, Entry Level to perform a variety of tasks associated with industrial cleaning, railroad, and agricultural operations. In this highly safety-sensitive role, you will learn to operate a wide variety of equipment in extremely varied environments at our many customer locations. As we often work mill shutdowns and provide incident response, this position requires working various shifts, weekends, and overtime with some holiday and on-call work and often requires long hours and travel. Travel expenses, such as hotel and a daily per-diem, are employer paid. Essential Duties and Responsibilities Include but are not limited to the following: Perform tasks following all safety protocols, rules and regulations as defined by local, state, federal, company and customer specific guidelines to support JEI "Target Zero" safety goal Complete all training and certifications as assigned and maintain current certifications as needed Operate a variety of equipment, including vacuum excavation, hydro-blasters, pressure washers, forklift, etc. Utilize personal protective equipment that can include: disposable or reusable coveralls, raingear, gloves, hardhats, safety glasses or goggles, chemical-resistant clothing, face shields, hearing protection, and respirators (half and full-face). Maintain clean work areas, including vehicles Drive company equipment to customer locations Complete daily time sheets and job cards accurately and timely with documentation of hours worked, job coding, equipment used, and meal and rest periods, etc. Perform safe equipment checks, preventative maintenance, and trouble-shoot and assist with repair when requested Follow procedures for each job and each piece of equipment Other duties as assigned Requirements Ability to pass pre-employment, random, and regular updates for physical/drug tests and background checks Valid driver's license and ability to be insured (we pull MVR report for last 5 years) Ability to lift 50 lbs Previous experience operating a forklift preferred but not required Previous experience working in a manufacturing, construction, or railroad setting preferred but not required Benefits Health/Dental/Vision (Employee Coverage is 100% Employer-Paid) Health Savings Account (with election of a HDHP) Basic Employee Life/AD&D Insurance (100% Employer-Paid) Voluntary Life/AD&D for Employee, Spouse, Child(ren) (100% Employee-Paid) Voluntary Long-Term Disability (100% Employee-Paid) Flexible Spending Accounts (100% Employee-Paid) Voluntary Critical Illness & Cancer Insurance (100% Employee-Paid) Voluntary Hospital Indemnity Insurance (100% Employee-Paid) Voluntary Accident Insurance (100% Employee-Paid) Voluntary Whole Life (100% Employee-Paid) 401K Retirement Plan (100% vested in 4% Employer-Paid Safe Harbor Match) Employee Assistance Program with limited free counseling sessions (100% Employer-Paid) Marketplace savings and discounts on pet/home/auto/boat/rv/renters insurance, identity theft protection, legal services, extended vehicle warranties, and employee perks Paid Holidays (8 days) Paid Time Off Some jobs are prevailing wage Opportunity for promotion As this is a safety-sensitive position, our drug/alcohol testing is not limited to but does include testing for THC metabolites. JEI is an Equal Opportunity Employer that is committed to diversity and inclusion in the workplace and in all our employment practices. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Overview At CoolSys, we offer more than just a job-we provide stability, growth, and industry-leading benefits for our employees. No wonder Newsweek named CoolSys one of America's Greatest Workplaces! As a large company serving diverse customers, we invest in our team with: Competitive Compensation: $35. 00- $60. 00 hr. Sign on Bonus: Up to $5,000. 00 DOE Ongoing Education & Training: Access to state-of-the-art facilities and paid online training. Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting. Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing. Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more. Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities Repairs kitchen cooking equipment equipment such as stoves, ovens, grills, and fryers. Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base. Test malfunctioning systems and components using electrical and/or mechanical skills. Maintain legible corporate and personal records of work history. Provides department support by processing job tickets, and work orders to the necessary department promptly. Drives company vehicle in a safe manner. Performs other related duties and projects as assigned by management. Qualifications High school diploma/GED. EPA certification. Certification from an accredited vocational-technical or trade school is a plus! Minimum 3+ years of hot side commercial kitchen appliance service. Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus. Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful. Must have a good driving record and be able to work independently. Emergency on-call availability is a basic requirement. Must be able to lift up to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time Join Us Today, there are 26 different companies that make up the CoolSys family of brands. Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and Twitter. Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR for driving positions) and drug testing are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance. Service Tech, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, specialty, hotside, hot side, Hstech, HVACR, cooking equipment, restaurant, kitchen, appliance

Job Description SAFETY: Promote the Safety Culture of Agri-Service. Advocate and exemplify safety and safe working habits using proper safety equipment not limited to hand, face, ear and eye protection. (PPE) Follows company safety policies and procedures on the jobsite, promotes safe behavior with our customers. Maintains a clean service truck, performs required inspections, and completes necessary paperwork. Ensures equipment under repair is in a zero-energy state after servicing (Lock out Tag Out). Handles chemicals in accordance with the Safety Data Sheet (SDS). Operates cranes within manufactures guidelines, understands the crane's lifting capacity. Uses correct tooling, performs tool inspections regularly, follows tools instructions and cleans as needed. Performs Job Hazard Analysis (JHA) of location and equipment, looks to eliminate or reduce potential hazards. Identifies potential safety concerns on all makes and types of equipment through walk around inspections and reports them to the supervisor and/or the customer. ESSENTIAL FUNCTIONS: Follow all customer care standards and provide customers with solutions. Repair equipment in shop, field or customer location. Utilize a computer/laptop to maintain service reports and other necessary paperwork. Communicate with customers and supervisors regarding the status of their equipment. Manage time efficiently and work with minimal supervision. Work extended hours with minimal notice. Accomplish training and participate with the company's strategic programs and projects. Follow and promote company's vision, mission, and values. Demonstrate an interest in expanding current skillset. Other job-related and non-specific job-related functions as needed. KNOWLEDGE, SKILLS AND ABILITIES: Demonstrated experience repairing farm equipment preferred. Ability to develop and maintain product knowledge of AGCO and Agri-Service products. Competently use a variety of mechanical and electronic diagnostic tools used to complete repairs. Ability to locate, understand an apply any technical information from computers, manuals or other guides. Ability to quickly identify problems, approach work from a solutions-based focus, and develop creative solutions to complex issues. Proficient in the use of Microsoft or other comparable systems required. Knowledge or ability to learn CDK, UKG and other software systems as identified by the organization. Drive and maintain company vehicle. Consistent attendance. EDUCATION AND EXPERIENCE: Proof of high school diploma or General Education Degree (GED) preferred. Proof of driver's license and acceptable driving record required. Must be able to adhere to all safety requirements and applicable safety policies. Must be able to communicate in English (speak, read, comprehend, write). PHYSICAL CHARACTERISTICS: Must be able to lift/push/pull up to 50 pounds occasionally and 25 pounds frequently. Must be able to accomplish any of the following for long periods of time: sit, walk, stand, climb stairs; reach, lean, twist. Benefits Medical Health's Savings Account (HSA) Dental Vision 401k Paid Time Off Voluntary Time Off Parental Leave Holiday Pay Life Insurance AD&D Insurance Pay Range: $18.00 USD to $40.00 USD Hourly Note: This role may be exposed to extreme fumes, extreme temperatures, high noise level, and dirt. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. It is not intended be an exhaustive list of all responsibilities, duties, and skills required of employees in this classification. Agri-Service is an E-Verify employer. Agri-service is an E-Verify Employer.

Description: The Dobbs Truck Group is a growth company that successfully expands our operations and customer base through a high-quality team of employees. Dobbs Truck Group operates 25 commercial truck dealerships through two operating companies - Dobbs Peterbilt and Western Truck Center. These dealerships represent some of the best commercial truck brands including Peterbilt, Volvo, Mack, Autocar, and Hino and include locations in Arkansas, California, Louisiana, Mississippi, Oregon, Tennessee, and Washington. We offer a competitive benefits package including medical, dental, vision, long-term disability, life insurance, and 401(k), as well as paid vacation and sick leave. Our Company is looking for long-term employees that we can invest in and grow with as we pursue our mission of being the premier commercial truck dealer group. I. General Job Description This position will be responsible for the maintenance and repair on all types of commercial trucks and equipment while working out of the fully equipped mobile service truck. This position will be responsible for the diagnosis and repair of all vehicles and equipment serviced by the Company's facilities. This position will be expected to perform with the highest degree of professional competence, as it relates to quality of work, product knowledge, and customer service. The duties listed below are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. Responsibilities Complete repairs in estimated time per industry standards. Grow and maintain the customer base Perform DOT inspection, troubleshooting, and repair on all areas of a vehicle including electrical, charging systems, starting systems, engine, HVAC, powertrain, and chassis components. Repairs include diagnosis and removal of injectors, cylinder heads, camshafts, main bearings, rod bearings, and transmission/clutch components. Utilize various diagnostic equipment, software, and technical publications/information to determine root cause of customer complaint and repair solution. Maintain service truck, supplied tooling, and parts inventory to Company's expectation. Provide thorough documentation that supports complaint, cause, and correction. Perform preventative maintenance when requested. Respond promptly to customer requests and foster customer relationships. Report to customer and service administration on any deferred repairs. Flexibility to be available after hours and alternate days. II. Minimum Job Qualifications 18 years of age. 4 years of dealer experience as a Diesel/Service Technician. Valid Drivers' License and a qualified MVR abstract. Minimum tool requirements (see below). III. Desired Job Qualifications High school graduate or GED with 5 years of experience in a truck dealership or equivalent experience. Commercial Drivers' License (CDL) Ability to work independently with minimal supervision. Great customer service skills. IV. Mental Capability Requirements Comprehension: Ability to understand complex problems, collaborate, and explore alternative solutions. Organization: Ability to organize and prioritize work schedule on short-term basis (more than 1 month). Reasoning & Decision Making: Ability to make decisions with moderate impact on immediate work unit. Communication: Ability to communicate effectively with individuals utilizing a phone. Mathematics: Ability to compute, analyze, and interpret numerical data for reporting purposes. V. Physical Demands and Work Environment The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to handle or feel, reach with hands and arms, and talk or hear. The employee is frequently required to stand, walk, climb or balance, stoop, kneel, crouch or crawl, and taste or smell. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 65 pounds. Specific vision abilities required by this job include color vision, peripheral vision, depth perception, and the ability to adjust focus. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and risk of electrical shock. The employee is frequently exposed to wet and/or humid conditions, extreme heat, and vibration. The employee is occasionally exposed to high, precarious places, fumes or airborne particles, toxic or caustic chemicals, and outside weather conditions. The noise level is normally loud. VI. Common Expectations of Performance for all Employees The following includes common expectations for all employees of the Company. The evaluation of job performance will be based on these common expectations as well as the position-specific responsibilities described above. Communications, Teamwork, and Feedback to Others Contribute to a work environment that is based on trust and respect. Have discussions on a regular basis with their manager to discuss opportunities to best achieve individual performance objectives and departmental goals. Suggest ways to improve the efficiency of conducting their job duties. Promote continuous improvement and change to support company growth. Mentor others unselfishly. Give credit where it's due. Company Loyal Policies and Work Ethic Adhere to the policies contained in the Employee Handbook. Adhere to the Company's Employee Conduct Policy. Support management decisions toward meeting company goals. Be open and receptive to new ideas, regardless of their origin. Make prudent decisions, which are based on the best interest of the Company and its long-term future. We are an Equal Opportunity Employer Dobbs Truck Group operates 25 commercial truck dealerships through two operating companies - Dobbs Peterbilt and Western Truck Center. Dobbs Peterbilt and Western Truck Center are equal opportunity employers that values a broad diversity of talent, knowledge, experience, and expertise. We foster a culture of inclusion that drives employee engagement to deliver superior performance to the communities we serve. Dobbs Peterbilt and Western Truck Parts do not discriminate in hiring or employment on the basis of race, color, religious creed, national origin, sex, ancestry, pregnancy, genetic information, gender identity, sexual orientation, or marital status; or on the basis of age against persons whose age is 40 and over, or on the basis of physical or mental disability; or to disabled veterans or to Vietnam veterans. We are proud to be an affirmative action employer and encourage minorities, women, individuals with disabilities, and veterans to join our team. Requirements:

We are looking for a Mobile Service Technician to join our growing team! The right candidate will be independent and have a strong service technician background. B-level technician qualifications and ASE certifications are preferred but not required. The day-to-day duties include traveling in the Mobile Service van to customer workplaces and homes to handle basic service needs and recalls. By working at a Ford dealership, you can be a part of a brand that honors the past, and is invested in the future. Join the Ford Family where we value service to each other and the world as much as to our customers! Benefits: Health, Medical and Dental 401K Plan Paid time off and vacation Growth opportunities Employee vehicle purchase plans Family owned and operated Long term job security Flexible Work Schedule Responsibilities: Provide an exceptional customer experience to drive loyalty and have a natural disposition to put the customer first Engage with many different customers each day and represent the dealership while being calm and responsive Organize and prepare for the day's appointments and be excellent at time management Perform vehicle repairs and/or maintenance work as outlined on repair order in a clean and efficient manner Communicate with the Mobile Service Coordinator, Parts Department and Dealer Management regularly to effectively manage production and customer communication Accurately document vehicle repairs/work performed on the repair order Stay informed of Ford technical bulletins and complete required training Able to work occasionally in challenging weather conditions Able to drive and maintain a company vehicle responsibly Take pride in the role and bring a start-up mentality to growing the business Qualifications: B-level or higher qualifications preferred Detail-oriented and organized Requires little or no guidance on jobs Valid driver license ASE/Manufacturer certifications - Ford certifications are desirable but not mandatory Service Technician experience preferred Strong use of technological devices including tablets Must be able to perform physical tasks and lift up to 100 pounds We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

If you're a successful flat rate technician and you're feeling burnt out in your current job, you need to check us out! We offer a very competitive certification based pay plan putting you in total control of your earning potential! A 4 day work week ensures our techs get plenty of time away from the dealership so they can do the things they love! Our state of the art climate controlled shop stays a comfy 70 degrees all year long! Our team based structure ensures each tech gets the support they need from their service advisors and team lead/dispatcher. If this sounds like a dream come true, apply today, we are looking forward to meeting you! What We Offer Medical and Dental 401K Plan with Company Match Paid time off Growth opportunities Paid Training Employee vehicle purchase plans Family owned and operated Discounts on products and services Technician Specific Benefits Air-conditioned shop State-of-the-art facility Shop equipped with the newest technology and equipment Uniforms provided Discounts on products and services Work environment OSHA certified to current Air Quality Standards Highly productive shop Career advancement opportunities, promote from within ASE and state inspection certification reimbursement and all training expenses paid to further your career Continued education, manufacturer offsite hands on and web based training Clean and professional work environment Competitive wages Responsibilities Perform work specified on the repair order with efficiency and in accordance with dealership standards. Test-drive vehicles, test components and systems using diagnostic tools and special service equipment Diagnosing, maintaining, and repairing vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc. Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed. Providing an estimate of time needed for additional repairs Executing repairs under warranty to manufacturer specifications Qualifications ASE certifications are ideal Strong automotive background Strong teamwork skills Willing to submit to a drug screen & background check Must have a clean & valid driver's license At least three years of Automotive Service Technician experience.

Do you want a career that has advancement opportunities? Are you looking for challenging and interesting work? Do you want to work for a growing family owned company??? Ed Staub and Sons Petroleum, Inc is looking for a Service Technician to provide service to our Propane customers in Hermiston and outlying areas. Duties include, but are not limited to: Tests and examines pipelines and equipment to locate leaks and faulty pipe connections and to determine pressure and flow of gas. Dismantles meters and regulators, and replaces defective pipes, thermocouples, thermostats, valves, and indicator spindles. Prepare and present estimate for installation and repair Installs repairs and maintains propane appliances Responsible for providing emergency response - on call Propane tank hook up and change out Heating equipment service and repair System re-piping and conversion Performs pump outs Perms tune ups and gas checks Provide professional and courteous customer service Maintains records in accordance with regulations and company procedures Occasional propane/fuel delivery Maintain accurate parts inventory Measures, cuts, and threads pipe and connect it to feeder line and equipment or appliance. The successful applicant will have a Class A or B CDL License and able to get Hazmat,Tanker and Air Brake Endorsement. Must be able to pass an MVR check Drug Screening, and Background verification. Propane Service Tech experience is preferred but not necessary. We offer competitive pay (pay will be reviewed in the first 90 days) and health benefits, dental insurance, company paid life insurance, a company sponsored short term disability plan. Paid holidays and 2 weeks paid time off along with an excellent incentive bonus pay plan, 401k plan plus a 10% profit sharing plan. We offer flexible work schedules and tuition reimbursement!!! Come join our team. Possible relocation assistance. Job Type: Full-time Wage $27-$30 per hour

We are looking for a Service Technician to join our growing team! The right candidate will have a strong service technician background and preferably be ASE certified. The day-to-day duties include performing work on specific repair orders and diagnosing what repairs need to be done. Service Technician Benefits: Sundays and all major holidays off Competitive Pay 100% Employee paid medical premium Room for Advancement and career growth Medical/Dental/Vision Industry Training 401K Flex Spending Account Employee Discount Program on Service, Parts and Vehicles Service Technician Responsibilities: Perform work specified on the repair order with efficiency and in accordance with dealership Test drive vehicles, and test components and systems, using diagnostic tools and special service equipment Diagnose, maintain, and repair vehicle automotive systems Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed Provide estimates of time needed for additional repairs Execute repairs under warranty to manufacturer specifications Service Technician Requirements: 2+ years of Service Technician experience preferred High school diploma or equivalent B level qualifications, including Diagnostic, Electrical and Engine Repair Dexterity, requiring a steady hand, excellent hand-eye coordination Mechanical and troubleshooting skills and ability to operate electronic diagnostic equipment Excellent customer service skills and basic computer competencies Positive, friendly attitude, along with an eagerness to improve Enjoy working in a dynamic environment Teammate with ability to collaborate with others effectively Ability to learn new technology, repair and service procedures and specifications Valid driver's license and clean driving record About Us: Our family has been in the automotive business for nearly 80 years. The Whitaker / Selover / Underriner brand is four generations strong and, since our opening day in Montana in 1944, we have taken pride in being supportive of our team members, as well as local organizations in and around our communities. Each generation has added to our success, growth and ways we give back to our communities. In 2014, we expanded into Washington adding Walla Walla Valley Honda and its community to our Automotive Family. Recently we were pleased to announce the addition of The Dalles, Oregon's Ford and Nissan dealerships. We are driven to grow and establish strong roots in every community we serve. It's what our family legacy is built on, and why our values remain Family, Community, Integrity, Passion, and Accountability. Underriner is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Meet the team that brings our projects to life. From logistics to electrical work, everyone in the field plays a critical role in building, powering, and delivering success on a jobsite. Our logistics professionals keep construction moving by ensuring a steady flow of inventory. They bring attention to detail and strong organizational skills as they procure tools and materials for our electricians. Apprentice electricians are the powerhouses behind our most dynamic projects, while summer interns and new graduates kick off their careers as industrial electrical professionals. These team members work closely with our journeyman electricians-seasoned experts who lead and mentor crews while completing complex projects. Our journeyman electricians partner with field foremen and site superintendents, who coordinate work, manage risks, and keep projects on track through planning, motivation, and communication. Our I&E, service, and maintenance teams ensure project performance by installing, testing, troubleshooting, and calibrating equipment. Across roles, we all champion safety-empowering employees to lead as safety shareholders, uphold zero-injury expectations, and care for our crews, company, and families. Electrical Service Technician Responsibilities. Employee will use his/her experience in the field to lead a team of 3-15 people, must be OK to work in the field "on tools" when needed. Employee will be on-site working closely with crew, managing projects, communicating needs and upholding safety standards, maintaining budgets and building relationships with clients. * Leadership - Consistently leads and motivates with positive influence that enables the team to contribute towards the effectiveness of achieving goals and project success * Coordinate with owner and manufacturing representatives to successfully test, troubleshoot and commission 480 V power distribution equipment * Test, configure parameters and modifies electrical systems for plant production * Troubleshoot and repair 480V and 120V panels including power wiring, control wiring, PLC's, relays and power supplies * A strong level of experience working with low - voltage power distribution electrical systems * Proficient with schematics, technical drawings and manual, able to identify issues and repair equipment * Safety - Has overall responsibility and dedication to keep the project and crews safe by setting the safety tone through active participation and involvement in the Interstates behavior based safety program * Communication - Builds productive relationships with onsite client representatives and allied trades on the project * Knowledge - Has an overall electrical and construction knowledge * Other duties may be assigned Qualifications Education & Experience: * Desire and experience being on-site industrial electrical projects * Must have some experience leading a crew * Desire to be part of building a team and a culture * Must have a state-issued journeyman electrician's license (or equivalent) Location/Travel: This position will require travel in/around Hermiston, OR- up to/within a 200-mile radius. Applicants must be permanently located in/around the office location or be willing to permanently relocate. Applicants must have reliable transportation and a valid driver's license. Per diem and mileage stipends applicable per company policy. Work Schedule: Start times, break times and work hours vary per site and stage of our projects. Our employees work more than 40 hours per week but no more than 60, as part of our commitment to safety. Due to the type of construction, weekend work maybe required on occasion. Work Environment: While performing the duties of this job, this role is often exposed to high/precarious places, risk of electrical shock, and all outside weather conditions. This role is expected to climb and work at heights and in confined spaces. The noise level in the work environment is usually moderate. Due to the nature of our work and our client base, this role may involve tasks in an environment exposed to dust. Candidates should be comfortable working in these conditions and complying with safety standards to protect their well-being. Benefits of Working at Interstates: * 401(k) Retirement Plan + Company Match * Company Vehicle or Vehicle Allowance * Health, Dental, and Vision Insurance Benefits (Short & Long-Term Disability, Group Life Insurance, and more) * Company Discount Perk Program (Access to discounts with renown brands across the country) * Paid Time Off & Holiday Pay, Flexible Schedule (Support work/life balance) * Bonus Incentives (End of Fiscal Year Incentives and Merit Increases) * Per Diem/Travel Pay or FAVR Program Benefits (as applicable) * Family & safety culture - a team that cares about you as a whole person, not just what you do at work * Company Sponsored Holiday Events, Team Celebrations, and Community Outreach Volunteer Time * Advancement Opportunities unique to our employee's long-term goals * Company Issued Cordless Milwaukee Tool Kit * Continuing Education & Journeyman Licensing Renewal Assistance * Double Pay for Sunday Work, Triple Pay if working an occasional holiday

Pavion Connects and Protects by providing innovative fire, security, and communication integration solutions to customers across 70+ U.S. locations and 22 countries. We bring industry-leading expertise to clients in enterprise, healthcare, education, government, data center, and retail industries. As a global leader, Pavion specializes in the design, installation, service, and maintenance of cutting-edge fire alarm systems, critical communications, video surveillance, access control, and advanced AV technologies. Our mission is to bring clarity and transformation to safety, security, and communication through integral technology and radical service. With a commitment to safety, reliability, and operational excellence, Pavion ensures scalable, future-ready solutions tailored to meet and exceed our clients' needs. Learn more at ************** Pavion and our family of companies are seeking a talented and motivated Fire Service Technician to join our security business unit. Primary Responsibilities: Install, program, and troubleshoot fire alarm panels and associated devices. Service and maintain VESDA and other aspirating smoke detection systems. Diagnose system issues and perform repairs or escalate when needed. Document all work performed, including inspection reports, deficiencies, repairs, and recommendations. Communicate effectively with customers to review findings, next steps, and repair solutions. Ensure compliance with safety protocols, company procedures, and regulatory requirements. Collaborate with the team to support scheduled PMs, emergency service calls, and project work Basic Qualifications: High school diploma or equivalent Valid LEA (Limited Energy/Low Voltage license or equivalent, depending on state/jurisdiction) NICET Level I-III in Fire Alarm Systems preferred (Level II+ strongly preferred) Proven experience with VESDA or similar aspirating smoke detection technology Strong understanding of NFPA codes (especially NFPA 72) Ability to read and interpret fire alarm drawings, wiring diagrams, and technical documents Excellent troubleshooting and problem-solving skills Valid driver's license and clean driving record Ability to lift 50+ pounds and work on ladders/lifts as required Disclaimer: This should not be construed to imply that these requirements are the exclusive standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as may be required. The employer has the right to revise this at any time. The job description is not be construed as a contract for employment. Pavion is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

The Journeyman Technology Field Tech, Worksite Solutions is responsible for independent diagnosis failure analysis, and repair of various on and off machine technology systems. Duties include but not limited to removing, repairing, assembling, installing according to manufacturer specifications and technician appropriate skillset. JOB DETAILS: SUCCESS AT WESTERN STATES: Western State's culture is based on passion for our Vision and VALUES. We are fiercely committed to SAFETY and sending every employee, safely home, every day . We strive for EXCELLENCE in all we do and are proud to be a “play to win” organization. We act with INTEGRITY in each and every decision we make. Our People and TEAMWORK drive a fun and engaging culture. We are ACCOUNTABLE as individuals and as an organization. JOB SUMMARY: The Journeyman Technology Field Tech Worksite Solutions is responsible for independent diagnosis failure analysis, and repair of various on and off machine technology systems. Duties include but not limited to removing, repairing, assembling, installing according to manufacturer specifications and technician appropriate skillset. ESSENTIAL FUNCTIONS: Safety Actively cares, promotes, manages, and advocates safety at Western States. As a team member in the organization, it is critical to ensure all employees, vendors, and clients have a safe work environment while adhering to all applicable safety policies, procedures and standards. Ability to complete Job Hazard Analysis (JHA's) prior to any job-related tasks according to WSECO's policy and standards. Maintains clean/clutter free personal work areas to ensure safe environment for all WSECO employees. Adhering to required personal protective equipment (PPE) as identified in safety policy. Diagnosis, Troubleshooting, and Repair Demonstrates troubleshooting skills on various technology systems. Skill level appropriate testing while comparing data to specifications to determine if the system is working as designed. Repairs and diagnoses technology systems failures according to business time requirement guidelines Completes complex machine technology system installations including auxiliary hydraulic system configuration and setup. Performs tasks independently, including inspections and troubleshooting. Technology Systems Completes technology system preventative maintenance and inspects/repairs components to include machine guidance, productivity tracking, safety and on machine health systems. Troubleshoots and repairs technology systems. Demonstrates understanding of various technology systems. Electrical and Hydraulics Understands, tests, and repairs complex electrical systems. Includes but is not limited to Deutsch and Ampseal Connectors, 6/12/24 battery voltage systems, and ability to repair/replace varies harness types. Troubleshoots and repairs machine software and firmware compatibility as needed. Troubleshoots and repairs machine networking and ECM communication systems. Continued Development Participates in continued education and training initiatives as outlined in the Western States Equipment Technician Career Development Plan. (TCDP) Utilizes service manuals (Trimble, SIS and parts books) to address technical issues and perform all required tasks within technician level abilities, in accordance to printed procedures. Utilizes parts reusability guidelines. Completes actual service reports for files and warranty purposes using STW for timely work order closing. Addresses all inquiries in a prompt and friendly manner in an effort to meet or exceed internal/external client expectations. Performs other duties as assigned while developing a mindset for technician productivity. SKILLS, KNOWLEDGE, AND ABILITIES: Ability to navigate Microsoft products. Ability to obtain job related certifications for any specialty equipment such as but not limited to forklifts, rigging and overhead cranes, etc. General knowledge of manufacturer specific software. (SIS, ET, and Trimble) Ability to develop and maintain effective working relationships with others. Consistent attendance and timeliness with the ability to work overtime with limited notice. Working within and promoting Western States' purpose, vision and values. EDUCATION AND EXPERIENCE: Proof of high school diploma or General Education Degree (GED). Associates degree in diesel technology, trade school diploma, preferred. Minimum of three years equivalent experience in a Caterpillar or similar environment with hydraulic, engine and powertrain experience required. Valid driver's license and acceptable driving record required with the ability to obtain a DOT Med Card. Appropriate technician level tooling required. Must be able to communicate (speak, read, comprehend, write in English). PHYSICAL CHARACTERISTICS: Ability to stand for long periods of time along with walking, sitting, repetitive climbing stairs, reaching (including but not limited to above-shoulder reaching), repetitive bending, stooping, pushing, pulling, leaning and twisting. Exposure to extreme temperatures and environment. Ability to lift up to 60 lbs. in accordance with Western States' Lifting Policy to include amount and approach. Must be able to meet all safety requirements for applicable safety policies. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. It is not intended be an exhaustive list of all responsibilities, duties, and skills required of employees in this classification. This role is designated as safety-sensitive.