Field technician jobs in Warwick, RI - 619 jobs

Job Title: Field Service Technician Coverage area: Greater Boston area Department: Service (Operations) Reports to: Service Manager FLSA Status: Hourly, Non - Exempt SUMMARY: The Field Service Technician provides customer service in person and/or by telephone to customers in and around the greater Boston area. Technicians will also help fulfill the needs of the maintenance schedule when needed by performing preventative maintenance on parking access, as well as software and/or hardware. Works with upper-level support to troubleshoot/setup/configure car access systems to include LAN (Local Area Networks). Effectively understands and troubleshoots basic setup of credit card configuration within the PARCS (parking access & revenue control system) network. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform field repairs on parking access system and building access systems, software and/or hardware related Troubleshoot and correct problems on devices/equipment, down to board level, low voltage Correct/fixes; minor to complex software issues on parking/access systems Understand and troubleshoot the entire setup of a SKIDATA network (LAN) Properly identifies all network devices on a LAN (router, modem, switch etc.) Can properly use handheld devices like, but not limited to, multi meter, Network tester, toner, etc. Understand basic relay logic Works with upper-level support to setup/configure firewall, router, and other network devices Provides effective customer service, to internal and external customers Properly identifies when higher level support is needed. Work closely with peers and support team to ensure customer expectations are met Effectively execute troubleshooting instructions from higher level support Properly maintain vehicle status and maintenance, as required Properly maintains his/her inventory levels, by properly transacting in ERP (SNOW) system Communicates effectively with service coordinator, advisors, and service management team Responsible for transactions for assigned work orders (WOs) in ERP system on a per WO basis (parts and labor), also to include maintenance checklist, as required by existing processes Perform monthly preventative maintenance - scheduled inspection, cleaning, lubricating, and adjusting of the equipment Other duties, as assigned QUALIFICATIONS: This is an experienced position within the Service Department. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required: Must be at least 21 years old, with a valid driver's license; have and maintain a driving record clean of any major or numerous violations Must be able to drive to field / customer locations to perform field work Working knowledge of Windows Server 2008/2012/2016, SQL, Windows OS 7, 10 and above, and network firewall configurations Must possess aptitude to learn new technologies The ability to work independently all while keeping others informed of your processes and progress via multiple avenues - including ERP System, email, and/or phone Proficiency in Microsoft Project, Excel, and PowerPoint Must be able to complete SKIDATA technical certified training courses - within 24 months; or has completed required certified courses in the technical career track. Specific product/equipment and software training supplied by SKIDATA EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) or equivalent and two (2) years of training/experience in related field required, or equivalent combination of education and experience. Good skills in the use of hand tools required - experience using ERP software a plus. CERTIFICATES, LICENSES, REGISTRATIONS: Valid Driver's License, in state of residence. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to drive motor vehicle; sit; stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop; kneel; crouch; or crawl; and talk; or hear. The employee must frequently lift and/or move more than 50 pounds. Specific vision abilities required by this job include close vision, distance vision, and depth perception; standing for long periods of time; climbing ladders, stairs, ramps; handling and assembling small parts, use of a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and computers/digital equipment. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and/or automobiles. The employee is occasionally exposed to wet and/or humid conditions; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; risk of electrical shock. The noise level in the work environment is usually moderate to occasionally loud. TRAVEL: There may be occasional travel outside of the employee's regular region; this travel may be by airplane or vehicle and will be planned with as much advanced notice as possible. SCHEDULE: Monday through Friday - Available 8am - 5pm. Saturday and Sundays - Possible with advance notification. The general hours of the position are Monday through Friday (8 a.m. to 5 p.m.); however, the expectations are that you be flexible to work as the needs of the business require. This may require occasional overtime; working on Saturday/weekends; and/or before or after the hours of 8 a.m. to 5 p.m. Technicians are required to be on an on-call rotation for one week per month. Supervisor will give as much advance notice as possible and try to evenly distribute hours based on business needs among the employees with skills, knowledge and ability for the work that needs to be accomplished. SKIDATA Inc. is an equal opportunity employer. All qualified applicants for employment will be considered without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, status as an individual with a disability, veteran status, or any other basis protected by federal, state, or local law. EEO M / F / D / V

Environmental Field-Testing Technician Info: Alliance Technical Group provides the full spectrum of services to support our customers' environmental needs, and ultimately, helps protect the environment. We are currently hiring enthusiastic, adventurous, science or mechanically minded individuals who have the desire to obtain valuable work experience and learn on the job. In this role, you will have the unique opportunity to gain exposure to a variety of industrial processes, and travel to various customer locations typically in your region/state, with all travel expenses paid. The work is conducted safely outdoors, on emissions source platforms, often at elevated heights, so you must love being outside. Generous quarterly profit-sharing bonuses and plenty of overtime available, In addition, you'll receive a great benefits package, paid time off, and the ability to receive referral bonuses. Duties & Responsibilities: In this important position, you will conduct Stack Emissions Testing including equipment preparation, deployment, staging/breakdown, sample collection and recovery. During our comprehensive training process, you will learn the following responsibilities, and once experienced, have the opportunity for rapid advancement: Conduct on-site field testing in a professional manner and transport testing equipment to customer sites Follow all test methods, procedures, and processes for quality source testing Apply careful mechanical and electrical skills while troubleshooting testing systems Qualifications: Ability to pass a comprehensive background check and drug screening Must have a valid driver's license Enjoy being outdoors, working safely in all weather conditions Ability and desire to climb stairs and ladders and work at elevated heights Degree in environmental, engineering, or mechanical sciences, or related experience skill and ability is highly preferred Experience related to environmental response/sample collection, mechanical, construction, or electrical work is helpful and preferred Experience with or strong aptitude to learn the use of the MS Office Suite (Word, Excel, Outlook) & Adobe products Ability and desire to be on your feet, lift equipment up to 75 pounds, climb ladders or stairs and work at elevated heights and use tools or equipment requiring a high degree of dexterity Ability to distinguish between shades of color is critical for safety Employee Benefits: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub In compliance with applicable Pay Transparency laws, Alliance Technical Group provides a range of compensation for job postings within locations that have these requirements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. The pay range for this entry-level role is $23-$26 per hour. Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #FIELDSERVICES Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

TEKsystems is seeking a Traveling Field Technician to support customers across Northern Massachusetts, New Hampshire, Vermont, and Maine. In this role, you will serve as a trusted technical expert responsible for diagnosing, repairing, and maintaining HP Indigo digital printing presses to ensure peak performance and customer satisfaction. This position combines hands-on technical work with customer-facing responsibilities, including on-site troubleshooting, operator training, and the use of advanced AI-driven diagnostic tools for proactive service. We provide extensive HP Indigo press training, so candidates must be eager to learn and develop new skills. Strong electromechanical aptitude is essential-this includes the ability to use a multimeter, interpret electrical diagrams, and apply mechanical problem-solving skills to resolve complex issues. Key Requirements: * Excellent communication and customer service skills. * Reliable transportation and willingness to travel long distances within the region. * Prior experience with commercial printing presses or color copiers is preferred but not required. This is a long-term opportunity for highly motivated entry-level to intermediate IT hardware technicians looking for a stable role where they can grow and build a career. *Job Type & Location*This is a Contract position based out of Worcester, MA. *Pay and Benefits*The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) *Workplace Type*This is a hybrid position in Worcester,MA. *Application Deadline*This position is anticipated to close on Jan 23, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Granite delivers advanced communications and technology solutions to businesses and government agencies throughout the United States and Canada. We provide exceptional customized service with an emphasis on reliability and outstanding customer support and our customers include over 85 of the Fortune 100. Granite has over $1.85 Billion in revenue with more than 2,100 employees and is headquartered in Quincy, MA. Our mission is to be the leading telecommunications company wherever we offer services as well as provide an environment where the value of each individual is recognized and where each person has the opportunity to further their growth and achieve success. Granite has been recognized by the Boston Business Journal as one of the "Healthiest Companies" in Massachusetts for the past 15 consecutive years. Our offices have onsite fully equipped state of the art gyms for employees at zero cost. Granite's philanthropy is unparalleled with over $300 million in donations to organizations such as Dana Farber Cancer Institute, The ALS Foundation and the Alzheimer's Association to name a few. We have been consistently rated a "Fastest Growing Company" by Inc. Magazine. Granite was named to Forbes List of America's Best Employers 2022, 2023 and 2024. Granite was recently named One of Forbes Best Employers for Diversity. Our company's insurance package includes health, dental, vision, life, disability coverage, 401K retirement with company match, childcare benefits, tuition assistance, and more. If you are a highly motivated individual who wants to grow your career with a fast paced and progressive company, Granite has countless opportunities for you. EOE/M/F/Vets/Disabled General Summary of Position: As a Configuration Technician, this person will be working hands on staging products such as Edgeboot, Cisco, Adtran, Juniper, Cradlepoint, Fortinet, and Meraki. They will need to communicate clearly, both verbally and in writing, to engineering, provisioning, and project management teammates. They will also work in coordination with the warehouse teams picking, packing and shipping equipment out of the Lincoln, RI facility. Accuracy will be vital to the success of this person along with the ability to work on multiple different projects during a shift. Duties and Responsibilities: Manage ticket queues Ensure the timeliness and accuracy of customer orders Responsible for the successful and safe execution of work instructions to meet the standards set by Granite's Product and Provisioning teams to equipment staging and configuration Work closely with all internal departments to ensure equipment is correctly configured and shipped to customers Required Qualifications : Proficient in Microsoft Office Suite Strong organizational skills Ability to work independently and make judgement calls to resolve issues Strong analytical and problem-solving skills Strong verbal and written communication skills Ability to multi-task Ability to work in a warehouse environment Preferred Qualifications: Experience with staging telecommunications equipment Understanding of Networking, TCP/IP, Routing, Switching, SD-WAN Experience with multiple equipment manufacturers (Cisco, Adtran, Fortinet, Meraki, Cradlepoint, and others) #LI-JH1

OVERVIEW: The Marine/Service Technician is responsible for the repair and overhaul of boats, machinery and trailers. KEY TASKS: Examine boat and discuss the nature and extent of damage or malfunction with the service advisor or customer. Perform diagnostics and repair of all types of marine engines and transmissions/drives/generators. Perform mechanical repair work such as: remove engine, transom or outdrive disassemble unit and inspect parts for wear overhaul or replace carburetors, blowers, generators, distributors, starters, pumps, electrical and fuel systems rebuild parts such as engine cylinder blocks rewire ignition system, lights and instrument panel replace and adjust taillights install and repair accessories such as radios, heaters, mirrors, and windshield wipers Operate a hydraulic jack or hoist as needed. Advise customers and/or insurance adjusters as to necessary repairs. Complete repair work utilizing service scheduler and SSO's within the established timeframe Ensure all warranty work is completed according to manufacture's and MarineMax guidelines Safely operate MarineMax and customer vessels during diagnostic water testing operations Maintain MarineMax tools in good condition and according to guidelines Other duties as assigned KEY RESULT AREAS: Internal/external customer satisfaction/FANS Timely and accurate completion of work Maintain 100% productivity MarineMax and its subsidiaries uses E-Verify, an Internet-based system, to confirm the eligibility of all newly hired employees to work in the United States. Learn more about E-Verify, including your rights and responsibilities.

Service Technician - Every day is an opportunity for you to turn an apartment into a home. #WRK4UDR. UDR, Inc. and its affiliated companies are seeking a Service Technician to join our team at 100 Pier 4, our apartment community (369 homes) located in Boston, MA. Key Qualifications: Technical of vocational certificate and/or degree preferred. Minimum of two years of experience in building and mechanical maintenance including plumbing, electrical, appliance repair painting and drywall. Knowledge and experience of HVAC and carpentry a plus. EPA Type II or Universal certification preferred. Valid driver's license and rotating on-call responsibility required. Some locations require certification in pool operation (CPO). Essential Job Functions: Respond to resident requests for maintenance and service by taking appropriate action to repair and/or restore service within the quality and time standards established by the organization. Maintain the overall appearance and cleanliness of the community by ensuring that grounds, amenities, building exteriors/interiors, market ready units, breezeways, curbs, signage, leasing office, central garbage areas, parking lots and other buildings and common areas are free of debris, trash, graffiti, and other items which affect the appearance of the community. All deficiencies and or risk management safety issues are reported immediately. Ensure that apartments are ready for occupancy by performing various and as needed electrical, HVAC, plumbing, carpentry, appliance repair, and other miscellaneous equipment maintenance and repairs, as well as carpet cleaning, painting, and overall apartment cleaning or other activities as necessary or as directed. Maintain tools, equipment, and workspace and ensure they are organized and in proper working order, request replacements as necessary, and assist in stocking the inventory. Provide superior customer service to internal and external customers. Perform other duties as assigned or as necessary. Exceptional Benefits: We offer a comprehensive benefit package and discounts to live in our premier communities! UDR, Inc., an S&P500 company, is one of the nation's largest owners and managers of residential apartment communities with a mission of offering remarkable apartment homes in the most desirable locations throughout the United States. Share your expertise, skill and commitment to excellence with us, and be a part of UDR's team. #WRK4UDR Pay: $22-$26/hr. UDR is proud to provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. UDR is committed to providing and maintaining a diverse workforce and an inclusive work environment with equitable access and opportunity for associates to participate, grow, and reach their full potential. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

The Military Field Service Representative (FSR) located in Tolemaida, Colombia, will support the Colombian military in their operation, management, repair, installation, and maintenance of assigned GE equipment for starting up and operating a T700 engine depot. In this role, the FSR will act as a liaison between GE Aerospace and the customer. Candidates must be mobile to meet the needs of the customer, program and business. **Job Description** **Job Title** T700 Depot Military Field Service Representative - Tolemaida, Colombia **Company Intro/About GE Aerospace** GE Aerospace is a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We power flight safely and reliably for today, tomorrow, and the future, partnering closely with customers to deliver high-quality outcomes with speed and efficiency. **Site, Business, OR Functional Area Overview** This role supports the startup and sustained operation of a T700 engine depot in Tolemaida, Colombia, serving the Colombian military's helicopter fleet. The Field Service organization is focused on operational readiness, on-time delivery, and cost-effective maintenance solutions that meet contractual and mission requirements. **Role Overview** The Military Field Service Representative (FSR) will serve as GE Aerospace's on-site liaison to the Colombian military, supporting depot startup and ongoing repair, installation, troubleshooting, and maintenance activities for T700 turboshaft engines. The FSR will coordinate technical support, drive issue resolution, and enable customer success while meeting contractual, safety, and quality objectives. **Key Responsibilities** + Act as the single point of contact to the customer for timely resolution of depot-level tooling, maintenance, repair, and engine management concerns + Establish and maintain strong on-site relationships to provide ongoing technical and business support + Provide hands-on technical assistance leveraging in-depth knowledge of T700 installation, operation, and troubleshooting to keep the customer on schedule + Use disciplined analytical methods to drive root-cause analysis; create presentations and spreadsheets (including pivot tables and Pareto charts) to track issues and implement lasting corrective actions + Exercise sound judgment to propose solutions beyond set parameters for complex maintenance and troubleshooting scenarios, drawing on internal and external resources + Lead low-risk projects and serve as a resource for colleagues; explain technical concepts and build consensus across maintenance, engineering, and management stakeholders + Uphold and promote safety, quality, delivery, and cost objectives; ensure compliance with export control and security requirements **Required Qualifications** + Fluent in Spanish and English (reading, writing, and speaking) + Bachelor's degree from an accredited college or university; or a High School Diploma/GED plus a minimum of 4 years in a field service representative or jet engine maintenance role + Minimum 3 years of field maintenance, modification, and repair experience on T700 engines + Strong oral and written communication skills with demonstrated ability to analyze and resolve problems + Ability and willingness to travel as required + Ability and willingness to obtain and maintain a U.S. Government security clearance **Desired Characteristics** + 5+ years of hands-on turboshaft engine maintenance experience + T700 experience across depot, organizational, intermediate, and flight line troubleshooting levels + Strong customer interaction and communication skills; proven leadership abilities + Demonstrated proficiency in repair troubleshooting, shop operations, testing of jet engines, and support equipment tooling + Ability to make formal presentations to maintenance, engineering, and management at all levels + Project management experience; ability to lead and influence customers and peers + Experience mentoring and transferring technical knowledge; strong written and oral communication + Ability to work independently with technical guidance as needed + High degree of tact and diplomacy to collaborate effectively with customers at all levels + FAA Powerplant license (preferred) **Additional Information** The base pay range for this position is $100,000.00-133,000.00 USD Annual The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on January 23rd, 2026 GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage, access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits includ tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time -off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or prog rams (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. © 2023 GE Aerospace and/or its affiliates. All rights reserved. Attorney-Client Privileged **Closing** At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), final offers will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Closing At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherw _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Temp Cable Technician Smithfield, RI Running, terminating, and testing Cat-6A cable. Installing J-Hooks, punch-downs, etc. Mult-floor office buildings in Smithfield, RI and surrounding area. 6-8 weeks of work For the right candidate this could become an ongoing assignment. NIGHT WORK (6 PM - 4:30 AM). Must be willing/able to work overtime. Candidates must have their own hand tools (Punch down tool, crimper, wire stripper, snips, etc.) PPE gear required.

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military

Job DescriptionAbout UsHighland Electric Fleets' mission is to make electric fleets accessible and affordable for all, enabling communities to realize the benefits of cleaner, quieter and healthier fleets. Highland is North America's leading provider of Electrification-as-a-Service (EaaS). Founded in 2019, Highland partners with school districts, municipalities, and fleet operators to make the transition to electric fleets simple and affordable. Highland proudly serves as the Official Electric School Bus Provider of the LA28 Olympic and Paralympic Games and Team USA. From pioneering vehicle-to-grid technology to managing some of the nation's largest electric school bus fleets, Highland delivers reliable, cost-effective solutions that support local communities and drive the future of transportation. What You Can Expect from Highland:· Competitive base salary and 10% performance-based bonus program· Mobile Maintenance Work Vehicle provided · Monthly cell phone and internet reimbursement of $130· 100% Health, Vision, and Dental coverage for employees & their dependents· 3 weeks accrued Paid Time Off and 5 Sick Days per year· 401(k) program and company match· Paid CDL and ASE pathing· A supportive, highly collaborative, team-oriented environment The Field Service Technician is enthusiastic about EVs and a self-starter who will work closely with customers to ensure that Highland's electric vehicles and charging stations are working properly and that buses can get students to where they need to be. No day will look the same, but responsibilities will include performing original equipment manufacturer-approved testing, repairs, and troubleshooting customer issues. Highland will provide the relevant training to repair all local equipment including basic electric vehicle functions, Level 2 EV chargers to DC Fast Chargers, and communications equipment.Key Responsibilities: Act as the company's on-site advocate for EV's and EVSBs, striving to achieve 90% overall uptime Represent the company at customer locations with the highest standards of professional conduct Retains a clean and safe work environment and brings any unsafe practices or conditions to management Diagnoses malfunctions and performs electric vehicle and charger repairs (e.g. adjust/test steering, electrical, cooling, lubricating, braking systems, drive trains, suspensions, power steering units, etc.) and related assigned duties within qualification level, in accordance with all relevant Federal, State/Provincial and local guidelines and requirements. Test-drives vehicles to ensure repair resolved Maintain detailed and timely documentation for troubleshooting and repairs, records time and materials used for each assignment in asset management platform Assist in managing of external support vendors to follow up and document repairs being made to Highland's assets Provides repair and maintenance assistance to junior technician staff Performs road calls and on the road repairs as assigned. Undergo electric vehicle and charger OEM and internal trainings Desired Qualifications: Minimum of 5+ years Electrician, Electric Vehicle, or Medium/Heavy duty truck Fleet repair experience Advanced Diagnostic, Electrical, and AC skills required Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals Knowledge of MS Suite products Possess the recommended tools for a Medium Duty technician as well as electrical diagnostics tooling Flexibility to work bus depot hours (early morning to afternoon) and weekends (when on scheduled shift) Clean Driving Record is required Requirements within 12 months of employment: Commercial Driver's License Required / Minimum 3 ASE certifications required (bonus compensation available if greater) / and Minimum of 4 OEM Certifications required (bonus compensation available if greater) Highland Electric Fleets provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Highland Electric Fleets complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionGet paid to travel the USA and install industrial equipment. BayWorks specializes in the installation of industrial paint systems. Our main client is Global Finishing Solutions. As a field installer you would erect steel, bolt steel panels to structure, install equipment and HVAC/ducting, metal fabrication, etc.. This is a full-time traveling position with paid travel home for major holidays or planned vacations. Per Diem is provided while away from home.

Join Our Team as a Cable Technician! Are you looking for a rewarding career opportunity? Koscom Cable Inc. is hiring Cable Technicians across the US! Whether you're an experienced pro or just starting out, we want you on our team. Position: Cable Technician Type: 1099 contract Compensation: Weekly pay ranging from $1200-$1700 (experienced techs can earn up to $2000/week) Benefits: Training allowance, weekly paycheck Responsibilities: - Running cables from poles and inside homes (physical fitness required) - Verifying signal levels on cable outlets - Providing TV, Internet, and Phone services for customers - Installing equipment (modems, cable boxes) - Troubleshooting technical issues - Educating customers on our services Requirements: - Own a white VAN or pickup truck (leasing options available) - Valid drivers license - Active Social Security Number - iPhone/iPad for app usage - Conversational English (other languages welcome) - Ability to pass a drug test and background check - Ability to carry heavy objects (like a 28 ft ladder) - No Experience Necessary! We'll provide training to help you succeed. Apply Now! Leave a request and we'll reach out to you. Check out our employees in action: ********************************** ZTrc9afp8 ******************************************* ******************************************* *Applicants must successfully pass a drug test and background check after a conditional offer of employment is made.

TOMRA of North America is a top International Reverse Vending and Recycling Company. At TOMRA transformation is at the heart of everything we do. We transform ideas & technology to create intelligent and pioneering tools to support a sustainable future. Job Description TOMRA North America, a top International Reverse Vending and Recycling Company is looking for a Service Technician in Taunton, Massachusetts. Are you passionate about sustainability and having an impact on the environment? Do you like to figure out how to solve problems? Do you like working with customers to help them fix things they can't fix on their own? Do you like being able to work independently while having a team to support you? Does the opportunity to test your creativity and analytical thinking excite and motivate you? Do you want the opportunity for a career that offers rewards beyond a paycheck and benefits? If you answered yes to any or all of these, then being a Field Service Technician might be the right job for you. TOMRA of North America is recruiting for a Field Service Technician to repair and maintain our machines in the Syracuse region. The Field Service Tech will be responsible for traveling to various retail customer locations to analyze, test, troubleshoot, repair, or rebuild the mechanical and electrical components of our reverse vending machines which accept recyclable containers from customers. Candidates will need to possess strong customer service skills and the ability to interact with customers and consumers as well as intercompany departments. *** We provide you with a company vehicle *** Pay: $21 an hour Quarterly bonus potential Paid Training Schedule: 7:00am - 3:30pm Monday through Friday with Rotating Saturday/Sunday (alternating weekend days with a comp day during the week) (Schedules may change according to customer needs, weekend availability a must) Benefits: Medical Dental Vision 401K (or Pension for Union Regions) Qualifications Mechanical Ability to troubleshoot and repair or replace machine components. Electrical: Troubleshoot and replace electrical components. Ability to diagnose and repair electrical failures and faults Physical: Employee is required to use hands to assemble, disassemble and repair mechanical components. Must be able to regularly lift up to 50 lbs. and frequently push/pull up to 150 lbs. Job Requirements: Superb customer service and communication skills Must be proficient with laptops and windows OS Excellent safety record at previous employers Valid Driver's License Come be a part of the Resource Revolution! Additional Information All your information will be kept confidential according to EEO guidelines. #indsrvne

Job Description The Environmental Field Laborer (Field Tech) must be able to work in compliance on various remediation and industrial maintenance projects. They must adhere to and maintain strict compliance with corporate/office policies and procedures, established health and safety protocols, and all applicable local, state, and federal regulations. JOB RESPONSIBILITIES Execution of field work encompassed in remediation and industrial maintenance projects while under direct or indirect supervision. Correct completion of all job-specific, employee-related MER paper work including Timesheets, Daily Work Reports, Driver's Logs and Daily Tailgate Safety Meeting Forms. Understand and work within project's detailed scope-of-work to maintain strict compliance with contract documents, project schedules, and corporate policies and procedures. Work safely during all phases of performing the job duties required in the field. Ability to perform work inside areas of varying dimensions; involving squatting and crawling for possible extended periods. Ability to follow directions; read/speak and understand English; read and understand common danger placards / labels and hazardous warning literature including site safety plans. The ability to safely drive and perform safety checks on all vehicles for which licensed. Project work may require out of town travel for two weeks or more Must be able to understand and comply with company and client safety standards. Due to the diversity of both scheduled and non-scheduled projects, physical demands, and environmental conditions vary significantly depending on the project. Work outside year round in all types of weather. May work in environments that are extreme in nature like environmental conditions such as heat, cold, heights, hazardous chemicals, loud noises, dangerous equipment, long hours etc. May be exposed to varying levels of physical activities and physical extremes such as long periods of standing, walking, crouching, use of hands, and heavy lifting of up to 50 pounds or more. Must be clean shaven at all times to allow immediate donning and seal of respirator. QUALIFICATIONS Requires High School Diploma or GED (or equivalent reading, writing and reasoning skills). Experience in emergency response, manual labor, general construction and/or industrial cleaning is preferred. A valid driver's license is required. TWIC preferred. OSHA 40-HR HAZWOPER & Confined Space Entry certifications are desired but not required. Successful completion of a pre-employment background and substance screening process including, but not limited to, employment verifications, criminal search and Motor Vehicle Record (MVR) search as well continued verifications throughout employment to ensure that all records meet company policy standards. BENEFITS Competitive Salary Health, Dental and Vision Insurance 401k with Company Match Paid Time Off (PTO) Paid Holidays This is an hourly position; the hiring range for the Environmental Field Technician in Randolph, MA is: $22.00/hour - $25.00/hour The actual hourly rate offered will be determined based on multiple factors including but not limited to relevant skills and experience. Moran Environmental Recovery is an Equal Opportunity Employer.

CDS Office Technologies is the premier Managed Technology and Security Services Provider in the Midwest and we are looking to add to our every-growing team of IT and cybersecurity professionals. We are looking for a Tier 2 Field Engineer to join our team and provide onsite support to our clients. As a Tier 2 Field Engineer, you will be responsible for troubleshooting, installing, and maintaining a variety of IT systems, including servers, networks, security, and backup solutions. You will also work closely with our Tier 1 Help desk and Tier 3 Engineers to escalate and resolve complex issues. You will report to the regional IT Director and follow the best practices and procedures of CDS Office Technologies. Additionally, you will assist with occasional pre-sale opportunities to assist our sales team in presenting CDS services and solutions to existing and potential new clients. We offer a comprehensive benefits package including but not limited to; medical, dental, vision, and life insurance, 401(k), paid holidays, paid time off, vacation time off, vehicle and cell phone reimbursement and a starting salary of $42,500 - $67,000 depending on experience and qualifications. Responsibilities Provide onsite support to clients for IT systems, including hardware, software, and peripherals Troubleshoot and resolve issues with servers, networks, security, and backup solutions Install, configure, and upgrade IT systems according to client specifications and CDS standards Perform preventive maintenance and system audits to ensure optimal performance and security Document and update service tickets, inventory, and client records Communicate effectively with clients, help desk, and engineers to ensure customer satisfaction Participate in on-call rotation and emergency response as needed Occasional pre-sale assistance for sales team members and potential new clients Qualifications Friendly and Professional Communication Skills Associate degree or equivalent in IT, computer science, or related field experience At least 2 years of experience as a field engineer or similar role Strong knowledge of Windows server and desktop operating systems, Active Directory, and Office 365 Strong knowledge of network protocols, devices, and security solutions Strong knowledge of backup and disaster recovery solutions Ability to troubleshoot and resolve complex IT issues Ability to work independently and as part of a team Excellent communication, customer service, and problem-solving skills Valid driver's license and reliable transportation Certifications such as CompTIA A+, Network+, Security+, or higher are preferred but not required If you thrive in a collaborative, fast-paced environment and have a passion for technology, we invite you to apply and join our growing team at CDS Office Technologies! CDS Office Technologies an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Sample Receiving Tech 1 (Client Services Tech 1) Schedule: Tuesday through Saturday, 3:00 PM - 11:30 PM Make an impact. Build a career. At Pace , we're committed to continuously moving science forward; to innovate and advance sustainable practices that improve the health and safety of our communities and lives. Ask any of us, and you'll hear the same thing repeated again and again: we work here because what we do positively impacts the world. If you're curious, driven and inspired by the idea of doing important work with real-world impact, there's no better place to build your career. Find your place at Pace Join us as a Client Service Technician, where you'll put your love of science to work in the sample receiving department of our environmental testing laboratory. You'll receive all the training you need to successfully take on your new role and grow an exciting laboratory sciences career at Pace . What you'll do Coordinate and perform sample-related activities, including shipping and receiving, processing and administration Maintain and update appropriate documentation and databases Participate in training on fundamental lab support policies, programs, and practices What you'll bring High school diploma or equivalent Experience in a laboratory or environmental testing setting is preferred, but not required Ability to perform work in a lab or office setting, remain standing for long periods, work around strong smells, and wear personal protective equipment while handling samples (e.g., lab coat, safety glasses and gloves; all PPE provided by Pace ). What we promise Comprehensive benefit program, including medical, vision and dental insurance, 401(k) matching and tuition reimbursement Opportunities to build a rewarding career An inclusive culture that stands for integrity, innovation and growth

Sample Receiving Tech 1 (Client Services Tech 1) Schedule: Tuesday through Saturday, 3:00 PM - 11:30 PM Make an impact. Build a career. At Pace , we're committed to continuously moving science forward; to innovate and advance sustainable practices that improve the health and safety of our communities and lives. Ask any of us, and you'll hear the same thing repeated again and again: we work here because what we do positively impacts the world. If you're curious, driven and inspired by the idea of doing important work with real-world impact, there's no better place to build your career. Find your place at Pace Join us as a Client Service Technician, where you'll put your love of science to work in the sample receiving department of our environmental testing laboratory. You'll receive all the training you need to successfully take on your new role and grow an exciting laboratory sciences career at Pace . What you'll do Coordinate and perform sample-related activities, including shipping and receiving, processing and administration Maintain and update appropriate documentation and databases Participate in training on fundamental lab support policies, programs, and practices What you'll bring High school diploma or equivalent Experience in a laboratory or environmental testing setting is preferred, but not required Ability to perform work in a lab or office setting, remain standing for long periods, work around strong smells, and wear personal protective equipment while handling samples (e.g., lab coat, safety glasses and gloves; all PPE provided by Pace ). What we promise Comprehensive benefit program, including medical, vision and dental insurance, 401(k) matching and tuition reimbursement Opportunities to build a rewarding career An inclusive culture that stands for integrity, innovation and growth

We are seeking cable technicians for ongoing low voltage projects across the state of MA, we will needs techs to have basic hand tools, reliable transportation, as well as the willingness to learn. *Job Type & Location*This is a Contract position based out of New Bedford, MA. *Pay and Benefits*The pay range for this position is $20.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) *Workplace Type*This is a fully onsite position in New Bedford,MA. *Application Deadline*This position is anticipated to close on Jan 19, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military