Service Technician jobs at Firetrol Protection Systems - 2456 jobs

Job title: Field Service Technician - HAC Reports to: Field Service Manager Provides maintenance and technical support for Sullair products at customer field locations. Considered an expert on all Sullair rotary products and accessories. Must have broad knowledge and experience on competitive rotary products. Installs new products or enhances existing ones; may provide training and best practices for on-site customer personnel. Identifies and troubleshoots all possible malfunctions and conducts or schedules repairs. Prepare detailed service reports to document service visits, issues and troubleshooting actions. Logs and tracks maintenance activities. Work with various departments at Hitachi Global Air Power to address concerns from the field to drive issues to a timely closure. Document service visits and generate reports with action items. Support the Sullair Training Department for customers, distributors, and employees. This position will report directly to the Field Service Manager. Duties and responsibilities: Performs any needed service on all Sullair rotary products without supervision Travel to field jobsites for troubleshooting, and service of Sullair and competitive rotary products Follow standard work for pre and post service preparation (submit expense reports, prepare service reports, make travel arrangements, complete timecards) On call as scheduled for afterhours customer support Follow all Environmental Health and Safety policies and procedures Communicate distributor feedback to Sullair management as Voice of Customer Drive field concerns to closure in a timely manner Support goal of service within the Service Department of 95% Contribute to positive Company branding by projecting a knowledgeable, professional, and customer-oriented image to customers Perform all duties in accordance with company standards, while always striving to understand the needs and expectations of the customer Dedicated to completion of responsibilities Must be fluent in English and have a valid driver's license. Must possess a valid driver's license for a minimum of 12 months, with no major or frequent traffic violations including, but not limited to: DUI in the previous 5 years, Hit & Run, License Suspension, Reckless/Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years Must be able to lift to 50 lbs. on a regular basis and work in industrial environments including extremes in temperature with continuous walking, reaching, bending, and kneeling Employee will use company provided equipment and will be required to travel to attend company provided training Employee is required to have their own tools to perform their job duties Operate a company vehicle safely and in compliance with all traffic laws and HGAP policies Education: High School Diploma or equivalent (Related industry experience may be considered in lieu of education requirements) Associate degree a plus Technical Trade School a plus Training Requirements The following training must be completed within 6-9 months of the hire date to satisfy the Field Service Technician tier within the HAC Technician Advancement Program. Sullair “Certified Technician” Online Oil Flooded Basics Stationary Controllers Introduction to Control System Oil Sampling Introduction to electrical basics In Person Oil Flooded stationary Electrical fundamentals Sullair Online Piping / instrumentation diagrams Introduction to VSD Communication and sequencing In Person Microprocessor and controls Variable speed drives Refrigeration / EPA certified Compressed air challenge - Level 1 Professional experience: 2-3 years of air compressor commissioning and maintenance experience Experience with rotary screw Oil Free Compressors a plus Demonstrated success in technical aptitudes of compressed air systems Experience with industrial product manufacturing and processes Strong verbal and written communication skills Must be able to engage and communicate effectively with all levels of the organization Strong grasp of Microsoft office required Ability to read and understand schematics Ability to work independently or on a team Key behaviors: On time to all meetings / appointments / and scheduled engagements Disciplined and reliable work habits Dedicated to completion of responsibilities and work safety Willing to accept responsibilities within a team environment Direct reports: N/A The successful candidate is responsible for complying with Hitachi's Code of Ethics and related policies. In performing the job, the incumbent shall take all steps necessary to comply with our safety rules and requirements and must actively support the organization's efforts to meet and exceed its goals of creating and maintaining a safe workplace. This description is to serve as a guide. It is intended to be flexible and will continue to evolve over time with business needs and demands and may be updated periodically and at the Company's discretion. Hitachi Global Air Power is an equal opportunity employer and will not discriminate based on race, religion, color, age, gender, sexual orientation, national origin, genetic information, veteran status, physical or mental disability, or other protected categories under applicable law, whether in recruitment, employment, promotion, transfer, compensation, or other conditions of employment.

Benefits: 401(k) Bonus based on performance Company car Company parties Competitive salary Dental insurance Employee discounts Flexible schedule Free uniforms Health insurance Opportunity for advancement Paid time off Training & development Tuition assistance Vision insurance Plumbing Careers at Benjamin Franklin Plumbing Do you value professionalism and punctuality? Do you want to work with the best professionals in the plumbing industry? Then you could be a candidate for Benjamin Franklin Plumbing! If you are an individual who values a rewarding career and would like your customers to be genuinely satisfied, you may be a match for our team. JOB SUMMARY A licensed plumber serves the clients of the company by expertly servicing, repairing, and replacing plumbing systems. JOB DUTIES Utilizes Straight Forward Pricing (including all company approved forms) correctly on each call Wears floor savers while in the client's home and maintains a neat work area while performing a repair or scheduled service Tests each aspect of the job before leaving a home to make sure everything is working properly. Ensures the job was indeed completed correctly and eliminates unnecessary callbacks after the job is finished Explains each service performed to the client each time a maintenance or repair is completed. Ensures clients are 100% satisfied with all work Conveys a safety-conscious attitude, both on the job and while driving Maintains cleanliness inside and outside of vehicles at all times MINIMUM REQUIREMENTS * A Tradesmen license is required to operate their own truck * Lead/Master Plumbers are considered senior level and typically operate their own truck

Kitchell Fleet Services is currently seeking a Senior Auto Technician with diesel diagnosis and repair experience for their busy full-service repair shop. Kitchell Fleet specializes in fleet repair including cars, light trucks, and medium-duty trucks. This is a salaried position with a guarantee of 40 hours a week The shift is typically Monday - Friday, 8 am - 5 pm. No weekends Duties and Responsibilities Conduct thorough vehicle inspections. Diagnose and repair vehicles to manufacture specifications - engine, driveline, brake and hydraulic, exhaust, fuel, ignition, electrical, suspension, and alignment. Seek ways to improve shop and employee proficiency, learn new technical information and vehicle repair techniques in a rapidly changing automotive repair environment. Assist fellow technicians/mechanics in diagnosing and performing vehicle repairs. Keep store management aware of vehicle updates in a timely manner. Demonstrate behaviors consistent with the company's vision, mission, and core values. Maintain a clean and organized shop. Promote and emulate respect, integrity, and honesty. Adhere to all company policy, procedure, safety, and environmental rules. Education and Experience High School Diploma or GED 5+ years of automotive repair & diagnostic experience. A Level Technician. Valid Drivers License. Preferred: ASE Master Technician.Certification Skills and Qualifications Experience With Diesel Engine Repair & Diagnostics. Customer-focused attitude. Able to excel in a fast-paced environment, with minimal come-backs. Ability to multi-task. Diesel engines Alignment experience. 5+ years experience as an automotive technician. Experience with Chassis / Suspension, brakes, and general diagnostics.

The QUIKRETE Companies is the leading manufacturer of packaged concrete and cement mixes in the United States and Canada, serving the commercial building and home improvement industries. With over 90 manufacturing facilities across the U.S., Canada, Puerto Rico, and South America, QUIKRETE ensures broad distribution and a diverse product range. Our state-of-the-art Technical Center enables us to deliver innovative and high-quality products to professionals and consumers alike. For more information, please visit our website at ***************** Role Description This is a full-time, hybrid on-site/travel Maintenance Technician role located in Johns Creek, GA. The Maintenance Technician will be responsible for performing equipment maintenance, troubleshooting, preventive maintenance, and conducting industrial and facility repairs. Additional responsibilities include inspecting systems, addressing operational issues, and ensuring machinery and equipment operate efficiently and safely. Collaboration with team members to meet operational and safety standards is also expected. Qualifications Proficiency in Equipment Maintenance and Troubleshooting Experience in Preventive Maintenance practices and Maintenance & Repair tasks Knowledge of Industrial Maintenance processes and tools Ability to identify and resolve mechanical and operational issues Strong attention to detail and adherence to safety protocols Previous experience in a manufacturing or industrial environment preferred High school diploma or equivalent; technical certifications are a plus Willingness to work on-site in Johns Creek, GA and on the road.

Able to diagnose and repair all plumbing fixtures, gas and electric water heaters, etc Sewer cleaning, jetting, camera inspection etc. Installation of new piping, DWV, water, gas, etc. Trouble shoot issues as they arise Requirements: 10 years' experience in a service truck doing Commercial and Residential Service Journeyman Plumber / Gas-fitter State of AL license Back-flow and Medical Gas Certification a plus. Clean driving record We are proud to offer our Team Members: Competitive pay and incentives Medical, Vision, Dental Paid holidays and flexible, generous PTO - 2 weeks after 90 days, opportunity to gain up to 5 weeks 401(k) Plan with multiple investment options Training and Development Programs Company-paid Employee Assistance Program Employee discount programs Company-paid and voluntary life insurance Company-paid and voluntary accidental death & dismemberment (AD&D) Company-paid short-term disability and voluntary long-term disability Healthcare reimbursement account and dependent care reimbursement account Health savings account with company contributions Vehicle discount purchase programs Disclaimer The above statements are intended to describe the general nature and level of work being performed by employees assigned to this job. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Comfort Systems USA, Inc. and all subsidiaries, is an equal opportunity employer in all aspects of employment and prohibits discrimination and harassment of any type to all individuals regardless of race, color, religion, sex, national origin, age, disability, veteran status, genetic information, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

About Us Aspen Utility Company, a Quanta Services, Inc. (NYSE:PWR) company, has been serving Texas for over 15 years. Aspen is a leader in the telecommunications construction sector. We specialize in aerial and underground construction, Design/Engineering/Permitting, inside plant cabling, small cell tower, and Coax & Fiber splicing. We focus on career development and reward excellence, recognizing each team member's unique contributions. We're at the forefront of powering modern life. Discover how your skills and dedication can make a real difference to us. About this Role Job Title: Fiber Splicer Company: Aspen Utility Company, LLC (A Quanta Services Company) Location: Conyers, Georgia Job Type: Full-TimeShift: Day and/or Night Shifts (On-call availability required) Position Summary: Aspen Utility Company is seeking a skilled and safety-conscious Fiber Splicer to join our telecommunications construction team. The ideal candidate will have hands-on experience in fiber optic cable splicing, testing, and troubleshooting in both aerial and underground environments. This role is critical to ensuring high-quality connectivity for our clients across residential, commercial, and municipal projects. What You'll Do Key Responsibilities: * Perform fusion and mechanical splicing of fiber optic cables. * Conduct OTDR, power meter, and light source testing to verify cable integrity. * Interpret and work from network schematics, blueprints, and splice diagrams. * Install and maintain fiber optic systems in aerial and underground settings. * Troubleshoot and repair damaged fiber systems. * Maintain accurate records of splicing activities and test results. * Ensure compliance with safety standards and company protocols. * Collaborate with field crews, project managers, and clients to meet project timelines. What You'll Bring Qualifications: * High school diploma or equivalent; technical certifications preferred. * Minimum 2 years of experience in fiber splicing or related telecommunications work. * Proficiency with fiber splicing tools and test equipment (e.g., OTDR, fusion splicer). * Ability to read and interpret technical documents and schematics. * Comfortable working at heights and in confined spaces. * Valid driver's license with clean driving record. * Willingness to work flexible hours, including nights and weekends. Preferred Skills: * Experience with GIS mapping and documentation tools. * Knowledge of coaxial cable systems and small cell installations. * Familiarity with safety protocols in utility construction environments. What You'll Get Benefits * Health, dental, and vision insurance * 401(k) with company match * Company Paid Life Insurance * Paid time off and holidays * Employee Assistance Program * Disability Plans * Employee Discount Programs Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law.We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.

About Us Aspen Utility Company, a Quanta Services, Inc. (NYSE:PWR) company, has been serving Texas for over 15 years. Aspen is a leader in the telecommunications construction sector. We specialize in aerial and underground construction, Design/Engineering/Permitting, inside plant cabling, small cell tower, and Coax & Fiber splicing. We focus on career development and reward excellence, recognizing each team member's unique contributions. We're at the forefront of powering modern life. Discover how your skills and dedication can make a real difference to us. About this Role Job Title: Fiber Splicer Company: Aspen Utility Company, LLC (A Quanta Services Company) Location: Conyers, Georgia Job Type: Full-Time Shift: Day and/or Night Shifts (On-call availability required) Position Summary: Aspen Utility Company is seeking a skilled and safety-conscious Fiber Splicer to join our telecommunications construction team. The ideal candidate will have hands-on experience in fiber optic cable splicing, testing, and troubleshooting in both aerial and underground environments. This role is critical to ensuring high-quality connectivity for our clients across residential, commercial, and municipal projects. What You'll Do Key Responsibilities: Perform fusion and mechanical splicing of fiber optic cables. Conduct OTDR, power meter, and light source testing to verify cable integrity. Interpret and work from network schematics, blueprints, and splice diagrams. Install and maintain fiber optic systems in aerial and underground settings. Troubleshoot and repair damaged fiber systems. Maintain accurate records of splicing activities and test results. Ensure compliance with safety standards and company protocols. Collaborate with field crews, project managers, and clients to meet project timelines. What You'll Bring Qualifications: High school diploma or equivalent; technical certifications preferred. Minimum 2 years of experience in fiber splicing or related telecommunications work. Proficiency with fiber splicing tools and test equipment (e.g., OTDR, fusion splicer). Ability to read and interpret technical documents and schematics. Comfortable working at heights and in confined spaces. Valid driver's license with clean driving record. Willingness to work flexible hours, including nights and weekends. Preferred Skills: Experience with GIS mapping and documentation tools. Knowledge of coaxial cable systems and small cell installations. Familiarity with safety protocols in utility construction environments. What You'll Get Benefits Health, dental, and vision insurance 401(k) with company match Company Paid Life Insurance Paid time off and holidays Employee Assistance Program Disability Plans Employee Discount Programs Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law. We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.

Innovation has guided our every decision since 1974. As more riders of all ages get on the roads, trails, and streets than ever before, we're here to do the best work of our lives to push the greatest human powered machine into the future each and every day. We're a team of barrier-breakers, disrupters, and problem solvers. We're committed to building a diverse and inclusive workforce where every teammate can succeed as we inspire riders everywhere. In Company Owned Retailed, we strive to be a transformative, inclusive, authentic, rider focused, and collaborative team that creates the best bikes and delivers world class rider care attention. Simply said, we provide quality in our products and to our riders at every interaction and are looking for a teammate to be a part of this growing team. Reach out - we're here to help you build your career at Specialized. JOB SUMMARY A Service Technician is the front line and point person for our brand to the rider and encourages successful, profitable retail by taking their technical expertise to the next level as a driver of outstanding in store brand experiences. A Service Technician works directly with riders, both present and remote, to identify and locate the goods, services, and experiences needed to provide solutions quickly and frictionlessly to keep them riding longer and better. Service Technicians work collaboratively and hands-on with staff and local riders as a host, mentor, brand advocate, and technical service ace. The Service Technician provides exceptional rider service; enhances rider satisfaction; and aids in meeting sales and profitability goals. HOW YOU'LL MAKE A DIFFERENCE * Meeting and making a connection with riders, asking qualifying questions and listening to riders' needs, then giving options and advice on meeting those needs from a pre-set service menu or tune ups and a la cart service. * Speak authoritatively on technical matters as they relate and pertain to our bicycles; be the expert * Assists customers in an enthusiastic and courteous manner; provides "wow" customer service. * Responsible for properly taking in all service work and setting and exceeding rider expectations, including correctly filling out service work orders, scheduling an appropriate number of repairs * Advises and assists customers with their product/service selection without bias. * Develops and maintains knowledge expertise of all merchandise in department to effectively assist customers with accurate information; keeps current as new product lines are introduced. * Assists with bike sales with technical consulting, and any other bike floor duties as needed. * Deliver best in class rider-service that ensures ongoing service and high levels of rider satisfaction * General cleanliness standards are set at store opening, maintained throughout the day, and reset at close of business, including light janitorial duty * Proficiency in Lightspeed point of sale systems and store operational websites * Regular, dependable attendance and punctuality WHAT YOU NEED TO WIN * Passion for cycling and the Specialized brand * Bike shop / Bike mechanic experience preferred * Excellent communication with the ability to effectively interact with riders and team members * Must be able to work as business dictates which includes weekends * Ability to stand for extensive time periods; while occasionally walking, kneeling, or reaching * Able to lift at least 50 lbs. or more and use proper lifting skills TELL ME MORE * Competitive health care (Medical PPO or HDHP)* * Dental* * Vision* * Health Savings Account (HSA) * Short and Long Term Disability * Company sponsored life insurance * Optional Term Life Insurance * Optional Critical Illness insurance * Optional Critical Accident insurance * Competitive vacation package* * 401(k) with match * 8 Weeks paid parental leave * Paid company holidays * Employee discounts on all product * Deep partner retail discounts * Fitness & Events Reimbursement * Employee Assistance Program * Commuter Benefits *if applicable in state * For eligible employees Here at Specialized we believe that bikes have the power to change lives. Our culture is one of passion, striving to break barriers and have a positive impact on the world. We want to increase representation of all races, genders, and body types in the cycling industry and are committed to building a diverse and inclusive workforce where all people thrive. We encourage everyone - especially those from marginalized groups - to apply to our job postings and help us earn the position as the rider's brand of choice. We are always looking for creative, innovative, and passionate people who are eager to contribute to our mission of pedaling the planet forward. Regardless of your qualifications, if you are ready to make a difference, please apply and let us know how you can make an impact at Specialized! See what we are up to on LinkedIn, Instagram, and most importantly, our #DogsofSpecialized.

The Lead Technician will be responsible for installation, termination and configuration, without direct supervision, of access control devices, such as: card readers, request to exits, electrified door hardware, access control panels, analog and IP cameras, camera servers (NVR), power supplies, cable pathway systems and various cable that includes but is not limited to: twisted pair cable, low voltage cable and coax. They will be directly responsible for onsite tasking of Field Technicians and Installers to meet the project milestones set by the Project Managers and Field Supervisors. Installations are performed in both new construction and retrofit scenarios in a variety of environments. Essential Functions• Onsite tasking of resources to meet project milestones established by the Project Manager• Install various access control devices and electrified door hardware• Install and connect access control panels, power supplies and control equipment• Install and program various CCTV; analog and IP cameras• Install and program various types of NVR's and VMS platforms• Install cable and pathway systems to support security systems• Work in a team environment under project manager, leading a group of field technicians• Maintain installation deadlines• Be accountable for the daily time entries of all crew members• Maintain a high level of quality control• Ensure safety on the job site• Perform end-user training • Participate in project commissioning and testing• Assist in the enforcement of standards related to final documentation• Attend trades meetings at construction sites as needed Minimum Qualifications• Hold and retain certification in at least two VMS systems• Hold and retain certification in at least two access control system• Have a minimum one year of experience of basic configuration of physical security systems• Have attended training for at least one camera manufacturer and received certificate• Hold and retain the OSHA-10 certificate• Have served as a Field Technician (or equal) for a minimum of two years• Must pass pre-employment background check and drug test Knowledge, Skills and Abilities • Ability to effectively lead and plan work days an installation crew of two to four workers• Demonstrated proficiency in low voltage principles (ohm's law, load calculations, metering, etc.)• Ability to effectively communicate with customer IT and Facilities staff• Ability to effectively coordinate with other trades• Demonstrated proficiency in the installation, termination and configuration of IP camera technology, controller hardware, power supplies, door hardware and credential technologies• Competency in the principles and concepts of physical security systems and demonstrate the ability to apply knowledge in the field

The Lead Technician will be responsible for installation, termination and configuration, without direct supervision, of access control devices, such as: card readers, request to exits, electrified door hardware, access control panels, analog and IP cameras, camera servers (NVR), power supplies, cable pathway systems and various cable that includes but is not limited to: twisted pair cable, low voltage cable and coax. They will be directly responsible for onsite tasking of Field Technicians and Installers to meet the project milestones set by the Project Managers and Field Supervisors. Installations are performed in both new construction and retrofit scenarios in a variety of environments. Essential Functions• Onsite tasking of resources to meet project milestones established by the Project Manager• Install various access control devices and electrified door hardware• Install and connect access control panels, power supplies and control equipment• Install and program various CCTV; analog and IP cameras• Install and program various types of NVR's and VMS platforms• Install cable and pathway systems to support security systems• Work in a team environment under project manager, leading a group of field technicians• Maintain installation deadlines• Be accountable for the daily time entries of all crew members• Maintain a high level of quality control• Ensure safety on the job site• Perform end-user training • Participate in project commissioning and testing• Assist in the enforcement of standards related to final documentation• Attend trades meetings at construction sites as needed Minimum Qualifications• Hold and retain certification in at least two VMS systems• Hold and retain certification in at least two access control system• Have a minimum one year of experience of basic configuration of physical security systems• Have attended training for at least one camera manufacturer and received certificate• Hold and retain the OSHA-10 certificate• Have served as a Field Technician (or equal) for a minimum of two years• Must pass pre-employment background check and drug test Knowledge, Skills and Abilities • Ability to effectively lead and plan work days an installation crew of two to four workers• Demonstrated proficiency in low voltage principles (ohm's law, load calculations, metering, etc.)• Ability to effectively communicate with customer IT and Facilities staff• Ability to effectively coordinate with other trades• Demonstrated proficiency in the installation, termination and configuration of IP camera technology, controller hardware, power supplies, door hardware and credential technologies• Competency in the principles and concepts of physical security systems and demonstrate the ability to apply knowledge in the field

The Lead Technician will be responsible for installation, termination and configuration, without direct supervision, of access control devices, such as: card readers, request to exits, electrified door hardware, access control panels, analog and IP cameras, camera servers (NVR), power supplies, cable pathway systems and various cable that includes but is not limited to: twisted pair cable, low voltage cable and coax. They will be directly responsible for onsite tasking of Field Technicians and Installers to meet the project milestones set by the Project Managers and Field Supervisors. Installations are performed in both new construction and retrofit scenarios in a variety of environments. Essential Functions• Onsite tasking of resources to meet project milestones established by the Project Manager• Install various access control devices and electrified door hardware• Install and connect access control panels, power supplies and control equipment• Install and program various CCTV; analog and IP cameras• Install and program various types of NVR's and VMS platforms• Install cable and pathway systems to support security systems• Work in a team environment under project manager, leading a group of field technicians• Maintain installation deadlines• Be accountable for the daily time entries of all crew members• Maintain a high level of quality control• Ensure safety on the job site• Perform end-user training • Participate in project commissioning and testing• Assist in the enforcement of standards related to final documentation• Attend trades meetings at construction sites as needed Minimum Qualifications• Hold and retain certification in at least two VMS systems• Hold and retain certification in at least two access control system• Have a minimum one year of experience of basic configuration of physical security systems• Have attended training for at least one camera manufacturer and received certificate• Hold and retain the OSHA-10 certificate• Have served as a Field Technician (or equal) for a minimum of two years• Must pass pre-employment background check and drug test Knowledge, Skills and Abilities • Ability to effectively lead and plan work days an installation crew of two to four workers• Demonstrated proficiency in low voltage principles (ohm's law, load calculations, metering, etc.)• Ability to effectively communicate with customer IT and Facilities staff• Ability to effectively coordinate with other trades• Demonstrated proficiency in the installation, termination and configuration of IP camera technology, controller hardware, power supplies, door hardware and credential technologies• Competency in the principles and concepts of physical security systems and demonstrate the ability to apply knowledge in the field

Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard - your next great opportunity is just a few clicks away! What we offer Competitive salary Paid vacation/holidays/sick time- 10 days of vacation first year Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Check us out!: ******************* ZMNrDJviY What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technicians and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service How you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads. Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required ethically and professionally. Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals. Install and modify software and graphics. Communicates with customers upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customers to become familiar with operating problems. Keeps customer informed on the service provided, outstanding issues and recommends system enhancements, upgrades, and replacement. Promotes the sale of add-on work. Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all control's technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors. Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required. Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains the technical workforce on non-complex, non-critical equipment. Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists. Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned. Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required. Assists in developing and testing software programs necessary to operate the system per the project requirements' intent. Compiles and/or completes project as built and close-out documentation. Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation. Selects, orders, and tracks the delivery of materials for assigned. Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. May provide field change information to the project team for the creation of as-built drawings and software. Keeps management and JCI contractor or customer informed of job progress and issues. Assists in performing site-specific training for owner / operator on the total building control system. Participates in release meeting with project field team. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. What we look for Required Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. Minimum of Six (6) years Commercial Controls troubleshooting experience in the HVAC industry. This includes buildings, chiller plants and systems. Vocational School program graduate or associate's degree in a technical field, or two years' experience in servicing electronic and or mechanical systems. Demonstrated ability to install and/or service electronic control systems and HVAC equipment. Effective communication skills to represent Johnson Controls on customer sites. Possesses the ability to explain technical information to technical and non-technical people. Demonstrate effective writing skills as well as understanding of programs and software applications. Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems. HIRING HOURLY RANGE: $24.50-$33.41 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

We are currently seeking a Service Lead Technician for low slope commercial roofing. Must have previous roofing experience managing crews and jobs. Excellent pay, dependent on experience and full benefits package. Year round work available. Requirements: • Repair and maintenance on all roof systems including BUR, Modified Bitumen, TPO, EPDM, PVC and slope (tile/shingles) • Ability to perform assigned tasks daily through completion with a strong attention to detail. • Maintain professional interaction with all customers. • Valid driver's license required • Clean motor vehicle record, and background check. • Must not be afraid of heights. • Lift up to 50 pounds. • Ability to work with others. • Perform work in accordance with job specifications and safety guidelines. Tecta offers a comprehensive benefits package including medical, dental, vision, 401(k) with company match, paid time off, paid holidays, etc. APPLY

Lead Low Voltage Technician- Prism Electric Inc Prism Electric, Technology Division Inc. is one of the most successful Low Voltage contracting companies in Texas and Oklahoma. Garland based Prism Electric has expertise with projects in virtually every field of telecom construction - design/build services, industrial and commercial developments as well as government and institutional projects. Prism Electric, Technology Division possesses world-class technical experts who maintain vital, long-term relationships and a high level of credibility with general contractors and other customers we serve. We have a strong reputation and extensive network of customer relationships and have consistently provided new, cutting-edge product innovations. Job Details: The successful Service Technician will operate in a wide variety of environments troubleshooting, making repairs, and performing both small and large telecom installations. Our primary customer base consists of Manufacturing, Light Industrial, Commercial and Property Management. You will be expected to be highly knowledgeable of your trade, provide excellent customer service, be self-motivated, quality focused, and to operate safely and efficiently in the field with a minimum of immediate supervision. Responsibilities: Potential candidates are required to have a professional appearance and demeanor and be highly proficient in the following areas: Safety Customer service Pull, terminate and test CAT5 or CAT6 cable in commercial environments Pull, terminate and test multimode or single mode fiber Troubleshoot copper and fiber Install pathway supports Closet relay rack and ladder rack buildout Commercial installations Manufacturing / Light Industrial installations In addition to these skills, potential candidates must be physically fit, able to lift a minimum of 60lbs, and be willing / able to work overtime and weekends if / when required. Additional capabilities / experience in the following areas will be considered a plus: Holder of valid Texas Driver License Access Control Video Surveillance OSHA 10 or OSHA 30 training Other safety training

Benefits: * Dental insurance * Health insurance * Paid time off * Vision insurance Senior HVAC Controls Technician Jacksonville, FL W.W. Gay Mechanical Controls & Integration is expanding and looking for a Senior HVAC Controls Technician who wants to own projects, solve complex problems, and be trusted as the technical lead in the field. If you're an experienced BAS professional who's tired of being micromanaged, underpaid, or stuck doing the same repetitive work, this role is designed for you. Why This Role Is Different * Pay, based on experience and skills assessment * Company service vehicle with take-home use * Local work - no constant overnight travel * Strong project management and engineering support * Real autonomy in the field - you're trusted to make decisions * Manufacturer training and long-term career growth * Stable workload backed by a respected mechanical contractor Technology You'll Work With You'll work hands-on with modern BAS platforms, including: * Tridium Niagara AX / N4 * Honeywell WEBs * KMC Controls * JCI FX (Experience with all platforms is not required - strong proficiency in the industry is sufficient.) Your Role As a Senior Controls Technician, you will serve as the technical lead on assigned projects, responsible for delivering high-quality BAS installations from start-up through turnover. Your responsibilities include: * Field programming and system start-up * Commissioning and functional testing under live and simulated conditions * Verifying sequences of operation and system performance * Graphics and front-end installation, testing, and client training * Troubleshooting and making real-world programming adjustments * Coordinating with project managers, technicians, and clients * Producing clean documentation, as-builts, and checkout sheets * Supporting warranty calls as needed You'll work with minimal supervision while having access to management and engineering support when needed. What Success Looks Like Within your first few months, you'll: * Confidently start up and commission assigned BAS systems * Identify and resolve field issues independently * Deliver projects that meet or exceed sequence and performance expectations * Build trust with PMs, clients, and fellow technicians What We're Looking For * 5+ years of experience in HVAC/DDC/BAS controls * Strong understanding of HVAC systems and control strategies * Proven experience programming, commissioning, and troubleshooting * Ability to read wiring diagrams, control drawings, and sequences * Professional, organized, and reliable on active construction sites * Valid driver's license with a clean driving record We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. For more than 60 years, W. W. Gay has been more than just a leader in mechanical contracting. We have been a place where hardworking professionals build lasting and fulfilling careers. Our success comes from people with integrity, strong character, and a team-first mindset, and we are looking for more individuals like you to join our growing team. Many of our employees choose to stay with us through retirement, finding purpose and opportunity in every project. Whether your skills are in project management, preconstruction, administration, safety, or the trades including plumbing, HVAC, and pipefitting, there is a path forward for you here. As a full-service mechanical contractor since 1962, W.W. Gay is proud to deliver innovative solutions with transparency, efficiency, and a name our clients can trust. What Sets Us Apart * 24/7 HVAC and Plumbing Service * Licensed in multiple states * Financial stability and bonding capabilities of $100 million single project/$350 million aggregate * Leadership within 9 office locations throughout Florida and Georgia * Yearly Service Agreements and Preventative Maintenance * Fleet of over 400 vehicles company-wide * Crane and Construction Equipment (bare and operated) At W.W. Gay, you will find stability, opportunity, and the chance to make an impact every day. W.W. Gay is an Equal Opportunity Employer.

Benefits: * Dental insurance * Health insurance * Paid time off * Vision insurance HVAC Controls Technician (BAS / DDC) - Entry to Mid-Level Jacksonville, FL W.W. Gay Mechanical Controls & Integration is looking for a motivated HVAC Controls Technician with 1-2 years of experience who wants to grow into a strong, well-rounded BAS professional. If you've worked with DDC controls, understand HVAC basics, and want hands-on experience with modern BAS systems alongside senior technicians, this is a great next step in your career. What You'll Learn & Work With You'll gain real-world experience on industry-leading BAS platforms, including: * Tridium Niagara AX / N4 * Honeywell WEBs * KMC Controls * JCI FX (You are not expected to be an expert - training and mentoring are provided.) What You'll Be Responsible For Under the guidance of senior technicians and project managers, you will: * Assist with installation, wiring, and termination of HVAC control systems * Load programs, make basic programming changes, and verify point-to-point operation * Support system start-up and functional testing * Help verify sequences of operation in the field * Assist with graphics setup and basic front-end navigation * Troubleshoot basic control and communication issues * Maintain checkout sheets and assist with as-built documentation * Follow company safety standards and job site procedures What You Should Already Be Comfortable With To be successful in this role, you should be able to: * Understand basic HVAC systems (AHUs, RTUs, VAVs, fans, pumps) * Read wiring diagrams and control drawings * Use a laptop to connect to controllers and BAS systems * Perform point checks and basic troubleshooting * Communicate clearly with senior technicians and supervisors * Work independently on assigned tasks after direction is given What Success Looks Like Within your first 6-12 months, you'll be able to: * Complete control device installations with minimal supervision * Perform reliable point-to-point checks * Make basic programming and sequence adjustments * Assist in system commissioning and troubleshooting * Progress toward a Senior Controls Technician role Requirements * 1-2 years of experience in HVAC, DDC, or BAS controls * Basic understanding of electrical systems and low-voltage wiring * Familiarity with BAS software or control interfaces * Organized, reliable, and eager to learn * Valid driver's license with a clean driving record Why W.W. Gay Mechanical Controls & Integration We are a controls-focused integration team backed by a respected mechanical contractor. We invest in training, promote from within, and give motivated technicians the opportunity to build long-term careers in building automation. If you want to learn the right way, work on real systems, and grow your skills, we'd like to hear from you. Apply today. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. For more than 60 years, W. W. Gay has been more than just a leader in mechanical contracting. We have been a place where hardworking professionals build lasting and fulfilling careers. Our success comes from people with integrity, strong character, and a team-first mindset, and we are looking for more individuals like you to join our growing team. Many of our employees choose to stay with us through retirement, finding purpose and opportunity in every project. Whether your skills are in project management, preconstruction, administration, safety, or the trades including plumbing, HVAC, and pipefitting, there is a path forward for you here. As a full-service mechanical contractor since 1962, W.W. Gay is proud to deliver innovative solutions with transparency, efficiency, and a name our clients can trust. What Sets Us Apart * 24/7 HVAC and Plumbing Service * Licensed in multiple states * Financial stability and bonding capabilities of $100 million single project/$350 million aggregate * Leadership within 9 office locations throughout Florida and Georgia * Yearly Service Agreements and Preventative Maintenance * Fleet of over 400 vehicles company-wide * Crane and Construction Equipment (bare and operated) At W.W. Gay, you will find stability, opportunity, and the chance to make an impact every day. W.W. Gay is an Equal Opportunity Employer.

Job Title: Valve Technician Job Type: Full-Time | Onsite Industry: Oil & Gas / Manufacturing About the Role: We are looking for a motivated and hard-working Valve Technician to join our team in Conroe, Texas. In this hands-on role, you will be responsible for the teardown, repair, new assembly, calibration, and diagnostics testing of frac valves. The ideal candidate is mechanically inclined, safety-conscious, and thrives in a fast-paced environment. Key Responsibilities: Calibrate, test, and troubleshoot valves and related instruments. Assemble new and repaired equipment to meet quality standards. Document repair, testing, and assembly activities including failure analysis, parts used, and labor hours. Perform inventory control tasks such as stocking, pulling parts, and cycle counting. Communicate with customers for technical support, troubleshooting, and repair quoting. Disassemble, clean, and evaluate parts for reuse or replacement. Prepare surfaces and paint assemblies and parts. Stamp and tag nameplates accurately. Package and ship parts, including crating when necessary. Conduct final inspections and complete inspection reports. Sign and document compliance sheets. Follow all safety protocols and company regulations. Maintain a clean and organized work area. Support other team members and perform additional duties as assigned. Qualifications: 1-3 years of experience in a related mechanical or industrial role. Experience operating forklifts and overhead cranes. Basic computer skills for documentation and communication. Employee Benefits: Competitive hourly wage with overtime opportunities Health, dental, and vision insurance 401(k) retirement plan with company match Paid time off (PTO) and holidays Opportunities for training and career advancement Employee assistance program (EAP) Team-oriented work environment Core Values: Safety People Integrity Quality Dedication AWC Indeed is an Equal Opportunity Employer.

Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard - your next great opportunity is just a few clicks away! What we offer Competitive salary Paid vacation/holidays/sick time- 10 days of vacation first year Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Check us out!: ******************* ZMNrDJviY What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technicians and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service How you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads. Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required ethically and professionally. Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals. Communicates with customers upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customers to become familiar with operating problems. Keeps customer informed on the service provided, outstanding issues and recommends system enhancements, upgrades, and replacement. Promotes the sale of add-on work. Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all control's technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors. Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required. Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains the technical workforce on non-complex, non-critical equipment. Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists. Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned. Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required. Assists in developing and testing software programs necessary to operate the system per the project requirements' intent. Compiles and/or completes project as built and close-out documentation. Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation. Selects, orders, and tracks the delivery of materials for assigned projects. Coordinates factory-mounting processes to meet factory and project schedule. Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. May provide field change information to the project team for the creation of as-built drawings and software. Keeps management and JCI contractor or customer informed of job progress and issues. Assists in performing site-specific training for owner / operator on the total building control system. Participates in release meeting with project field team. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. What we look for Required Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. Minimum of Four (4) years Commercial Controls troubleshooting experience in the HVAC industry. This includes buildings, chiller plants and systems. Vocational School program graduate or an associate's degree in a technical field, or two years' experience in servicing electronic and or mechanical systems. Demonstrated ability to install and/or service electronic control systems and HVAC equipment. Effective communication skills to represent Johnson Controls on customer sites. Possesses the ability to explain technical information to technical and non-technical people. Demonstrate effective writing skills as well as understanding of programs and software applications. Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems. HIRING HOURLY RANGE: $22.59-$34.66 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Job Description Founded in 1984, Firetrol is the national leader in fire protection & life safety services. Firetrol Protection Systems is seeking an Sprinkler Service Technician to support a diverse portfolio of service. Maintains a relentless focus on meeting and exceeding customer needs and expectations. Builds relationships with current customers by delivering on our promises and creates new relationships with potential customers in a proactive manner, promoting all of our services. Join our team of over 900 of the best Fire Protection Professionals in the industry. We are looking for a fire sprinkler technician to perform Service work. Requirements Working knowledge of wet, dry, pre-action systems and deluge systems as well as backflow and minimum knowledge of fire pumps. And have the knowledge to troubleshoot these systems. Proficient in NFPA 13, 20 & 24 code requirements. Ability to use trade appropriate tools to perform daily pipe fitting duties efficiently and safety Ability to train others to use trade appropriate tools efficiently and safely. Have minimum skills to operate a basic service platform. Minimum 2 years' experience in Sprinkler Service setting. Clear background and must be able to pass a hair follicle. Benefits Firetrol offers competitive wages and top-of-the-line benefits that include health, dental vision, life insurance, short and long term disability, generous paid time off practice and a 401(k) plan with a generous company match and immediate vesting. Additionally, sponsors training and education opportunities. Finally, Firetrol offers career growth opportunities, not just a job.