Field Engineer jobs at Flatiron Constructors Inc

The Electrical Engineer is responsible for all electronic control, radio communication, monitoring systems, and components including computer-related hardware and software. Benefits * Medical * Dental * Vision * Employer Paid & Voluntary Life Insurance * 401(k) Employer Match plus Annual Profit-Sharing Contributions * Paid Vacation, Sick Time & Holidays * Employer Paid Disability Plan * Employee Assistance Program * CalPortland is proud to offer a comprehensive, competitive benefits package that provides health and financial support to our most important resources: our employees. Your benefits are an important part of your overall compensation at CalPortland. That's why we give you a wide range of benefits to choose from. • Medical, Dental, Vision o low-cost premiums even for family coverage • Company-paid life/AD&D insurance • Company-paid short-term disability • Paid sick/vacation/holiday • 401k/Company Funded Pension Program (program is dependent upon location and job type) • Employee Assistance Program (EAP) • Additional voluntary benefits Compensation $95,000 to $105,000 Depending on Experience Responsibilities Ability to assist and support the Plant Automation Engineer with the operation, maintenance, and programming of all plant instrument/analyzer systems including logic, analog and graphics, and all other technology that may be acquired Assist in the maintenance of instrument/analyzer/electrical systems, server-based high-level analyzer systems, and data historians such as OSI Pi, FLS ECS/QCX; assist CIS with the maintenance of corporate IT network Work with the plant's team to develop new control systems applications for projects Work with the energy team to identify improvements and participate in energy audits Assist with all aspects of capital projects including sizing of conductors and protective devices; load calculations for new and existing power systems in preparation for additions, changes, and capital projects interconnecting to the plant electrical system Identify worn and defective components as well as appropriate replacements; provide field inspections and supervision for electrical work on projects Support plant by diagnosing and correcting electrical problems Provide technical and safety training to Plant Electricians Complete design and drawing updates for replacement components Ability to apply corporate standards to designs and solutions suggested/implemented; use new technologies at the plant such as smart MCCs, including design, training of electricians, and updating documentation/diagnostic systems Replace or upgrade worn and depreciated components; design, change, and modify instrument/analyzer systems Create and submit capital proposals Education Bachelor of Science degree in Engineering Requirements/Qualifications Willing and able to work flexible hours as needed to maintain plant instrument/analyzer systems Must be a self-starter and be able to work independently Ability to maintain skills as necessary to keep pace with the ever-changing and improving technology for plant instrument/analyzer systems Strong communications and management skills - will work with, direct, assist and/or follow vendor services for troubleshooting and maintenance of all instrument/analyzer systems Troubleshooting skills and critical thinking are a must Ability to read and edit process flow drawings; the ability to read and create logic decision charts Ability to travel - required to travel to company facilities and other meeting locations on occasion Must be able to work cooperatively with plant and corporate personnel Preferred: Prior experience in computer automated control and instrumentation and/or cement production processes Knowledge of National Electrical Code (NEC) Understanding of instrument/analyzer system fundamentals Power distribution systems, relays, medium volt switchgear, instrumentation, PLC's, VFD's, etc. Conditions of Employment Successful candidate must submit to a post-offer pre-employment physical examination, drug/alcohol screen, and background check. Some positions require FMCSA-regulated ongoing drug and alcohol testing. #LI-PW1

About the Role: The Project Engineer will be responsible for coordinating with individuals, managing engineering firms, and following processes and standards to ensure the Company achieves reliable, quality, and safe designs. This person will be responsible for facilitating the design process from conceptual through IFC design. They will be responsible for managing 3rd party engineering firms, working with CSI internal engineering resources, and being the project lead in all aspects of project design. This responsibility will align and work with the construction team to ensure they have the necessary design information, quantities, and parameters to build the work. They will support the project design by ensuring the design meets the contractual, technical, safety, and quality requirement from Client, Company, and Industry Specifications and Standards. This position will have travel and project responsibilities to support the site team and lead design reviews as required. This position will not manage or supervise the construction activities performed on the project site. Company Overview Founded in 1990, CSI has emerged as a leader in highly technical and innovative electrical design and construction. We are a full-service firm with the resources and expertise to handle any commercial, industrial, or one-of-a-kind challenge. We are a trusted contractor to diverse industries, such as aerospace, biotech/pharmaceutical, education, healthcare, entertainment, hospitality, manufacturing, and retail, to name a few. Our services also include energy solutions and have earned a reputation as a premier provider of energy development, installation, and maintenance. In July 2019, CSI proudly joined the MYR Group family expanding our commercial and industrial reach. We're proud to celebrate 31 years of commitment to do all things with excellence for our customers, ourselves, and our craft. We Build Better. Essential Functions Manage and direct multiple 3rd party design firms working towards Issued for Construction Drawings for Electrical, Civil, and Structural designs. Coordinate and lead design reviews at each design milestone. Design reviews will likely include the owner, CSI, and 3rd party personnel. Perform the overall coordination and integration of technical activities in engineering projects and services. Direct and review project designs and technology integration. Work with project managers to facilitate design understanding as the start of construction occurs. Ensure there is understanding of the intent of the design and how the design will be audited throughout the construction phase. Seek opportunities to add value to the project. Perform economic analysis/value engineering to determine cost-effective solutions and prepare written recommendations. Ensure value engineering is incorporated into future designs. Manage 3rd party engineering resources to ensure deadlines are met, and the construction team has the necessary engineering information to produce a quality project on schedule. Maintain and manage engineering schedules and budgets to meet the requirements of the project. Possess a full understanding of time and resource management to achieve the results needed for project deadlines. Review and facilitate approval of materials to be used on the project by attaining Engineer of Record approvals or other resources available. Ensure takeoffs are complete and accurate for material procurement. Nurture and maintain key professional relationships with utilities, owners, engineering firms, energy subject matter experts, and others. Coordinate, lead, and document regularly scheduled calls between applicable parties. Assure projects are designed and constructed according to all applicable safety standards, including ASTM, NESC, NEC, NFPA, etc. Ensure design deliverables are received in time to support procurement and project schedule. Acts as a technical resource for project construction teams. Acts as engineering liaison for the construction team, 3rd party Engineer of Record, Client, and internal engineering resources from award through completion. Responsible for engineering document control process, including client and engineering transmittals, RFI's, and associated logs. Apply for and complete local permits as specified by the contract. Ensure that each design is developed with consideration for efficient installation, maintenance, and repair. Consult Field Operations Manager and Trade Superintendents as necessary for recommendations. Review implications of project design changes and make recommendations Recognize, document, and report cost impacts due to design changes. Share impacts with project management and procurement team. Perform economic analysis/value engineering to determine cost-effective solutions and prepare written recommendations. Train and develop Field Engineers and Field Coordinators in engineering management, document control, and RFI processes. About You: Qualifications BS in Construction Management, Business, or Engineering. Minimum of three years in the solar + BESS EPC, with a strong knowledge of construction sequencing, construction methods, and materials practices, including knowledge of electrical systems. OSHA 30 certification desired, but not mandatory. Registered Professional Engineer (PE) status or qualified to take test desired, but not mandatory. Can be a combination of trade, education, and relevant work experience. Knowledge/Skills/Abilities Proficiency in MS Office Suite (including Microsoft Word, Excel, PowerPoint, and Visio). Database experience is a plus. Experience with Primavera 6 and Microsoft Project scheduling software. Positive and proactive attitude and ability to take initiative. Excellent reasoning skills for identifying strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. Ability to take ownership and accountability, work in a team environment, display leadership skills, work under pressure, and adapt to changing job requirements. Strong leadership abilities and interpersonal, organizational, and communication skills (tact, diplomacy, influence, etc.), both written and verbal. In-depth knowledge of equipment and practices used in solar power plant construction. Knowledge of business and management principles involved in planning, resource allocation, leadership, production methods, and coordination of people/resources. Knowledge and skills of providing best-in-class customer service, including needs assessment, quality, and safety standards, and achieving overall customer satisfaction. Consideration of the relative costs, benefits, and impacts of potential actions to choose the most appropriate one. Ability to ensure the outcome and results from work performed and effective resources. Knowledge of electrical power engineering principles and familiarity with computer and analytical tools related to equipment sizing, load flow, and power quality. Ability to monitor and assess the personal performance and the performance of other individuals or organizations to make improvements or take corrective action. Work Environment Works in the office 70% of the time and on-site 30% of the time May work in varying weather conditions: hot, cold, and wet conditions. What We Offer: Compensation & Benefits Hourly Rate $36.00-$53.00/ hour (Non-Exempt) Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. CSI reserves the right to adjust ranges depending on the selected candidate's qualifications. Amazing Company Culture - We have a culture of trust, teamwork, performance, and commitment that drives our success. Competitive Salaries - We pride ourselves on offering above-average industry salaries based on talent and experience. Annual Paid Time Off starting at 15 days plus 9 paid Holidays. Generous 401(k) Plan with 100% match up to 6%. Immediate vesting and Annual profit-sharing potential. Company-paid life, and accidental death & dismemberment. Employee Assistance Plan (EAP). Various voluntary plans are available, including short- and long-term disability, supplemental vision, accident, hospital and critical illness, and additional voluntary life insurance plans for employees and dependents. Company medical and dental insurance for you and your family. CSI pays 100% for Employee and 75% of dependent coverage premium for the selected plan(s) Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at **************. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #applow LinkedIn Workplace: #LI-Onsite

RESPONSIBILITIES INCLUDE Develop complete and thorough understanding of the Contract Documents including drawings, specifications and geotechnical reports Project engineering of civil projects with grading, excavation, shoring and concrete placement Prepare project submittals including construction means and methods Draft and process RFI's Assist with Project schedule and update tasks with information from field team Assist with material procurement and verification process Manage field quality and control cost Assist with equipment tracking and reporting on project Procure small tools / light equipment Assist with invoice reviewing and coding Assist with building the work according to plans and specifications Perform site visits to evaluate site conditions Request and evaluate vendor and subcontractor quotes Prepare take-offs and assist with design calculations Understand and assist with implementing required safety measurements EXPERIENCE AND QUALIFICATIONS BS Degree in Civil Engineering or Construction Management 1 - 2 years of construction field experience Proactive and self motivated Excellent communication and interpersonal skills. Capable of performing and overseeing survey / layout of work Excellent problem solving solutions and critical thinking skills Strong time management skills with ability to respond quickly and effectively under pressure and deadlines Desire to learn and succeed Goal and schedule driven Ability to adapt to changing environments Proficient with Word, Excel, AutoCAD Strong work ethic - willing to do what it takes to get the job done Ability to work independently as well as part of a Team Basic understanding of construction methods Ability to travel to various job sites Valid current Driver's License required Background check and drug screening is required. Must be legally authorized to work in the United States. Buesing Corp does not provide Visa sponsorships. *This is a safety sensitive position.

Gray Construction is looking to add a Japanese Speaking Project Engineer with a Mechanical Engineering background to their Charlotte, NC or Atlanta, GA office. Responsibilities Why Gray? Gray is a fully integrated, global service provider deeply rooted in engineering, design, and construction, along with smart manufacturing and equipment manufacturing services. Consistently ranked as a leader in the industry, we focus on the following markets for domestic and international customers: Food & Beverage , Manufacturing , Data Centers , Distribution , Commercial and Advanced Technology . Founded in 1960, Gray has grown to encompass a complementary family of brands designed to augment and enhance each other's specialized capabilities without gaps or redundancies. Our robust offering-which includes strategy, operational improvements, construction, extensive engineering, automation & controls, and equipment manufacturing-enables us to create one-of-a-kind solutions at the highest levels of customization, delivering unmatched precision and partnership to some of the world's most sophisticated organizations. Develop, update and monitor job progress using QMS program, including scheduling, estimating and budgeting to ensure that construction of project parallels with schedule. Perform quantity take off(s), cost estimates and bid solicitation. Provide research options and regulation information as required. Purchase and coordinate the delivery of certain materials for the project(s) ensuring optimum prices, quality and conformance to specifications and budget. Reviews and approves invoices and change orders. Negotiate with subcontractors and vendors for specific trades ensuring that all scope is encompassed. Review vendor and subcontractor shop drawing submittals for construction as directed by the supervisor. Relocate to specific job sites (if required) in order to become familiar with procurement and construction practices. Attend weekly job site meetings. Assist in the preparation of various reports to assist in the successful management of the project(s), such as: monthly red files, progress analysis/schedules, billings and status reports. Assist in the organization and maintenance of job files to ensure continuity of work flow. Submit verbal and written reports on project status to supervisor. Communicate effectively with customer, direct consultants and subcontractors on the project(s). Responsible for the communication, implementation and enforcement of Gray's safety program on site. Other duties may be assigned. Qualifications Bachelor's degree from four-year college or university and a minimum of three years related experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet and e-mail applications. May also require working knowledge of scheduling applications. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be physically present in Birmingham office. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime may be required. Some travel may be required. Supervisory Responsibilities Indirectly supervises the activities of subcontractors and field personnel. EEO Disclaimer Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $5.8 billion in revenue for 2023, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. The Role We Want You For The construction Project Engineer will be based on the construction project site and will service our clients in a multi-state region and may even travel across the country. You will have the opportunity to build large, complicated, iconic design-build projects $30 million and above. In this role you will be part of a team responsible for taking projects from conceptual stages through closeout. The Specifics of the Role Build client and subcontractor relationships. Team with Architects, Engineers, and Planners to create and manage a design schedule. Assist in the establishment of project forecasts and budgets. Manage costs. Accept responsibility for project execution. Mentor and develop Interns and new incoming project management staff. Requirements Bachelor's Degree in Construction Management, Engineering, Architecture or related. 0 to 5 years of experience managing construction projects, ideally design-build. Demonstrated knowledge of construction principles, practices, and technology. Previous experience on a successful project management team. Ability to walk a job site, climb ladders, and scale multi-floor scaffolding. Ability to lift objects of at least 50 lbs. Some Things You Should Know Our clients and projects are nationwide - Travel will be required. No other builder can offer the collaborative design-build approach that Clayco does. We work on creative, complex, award-winning, high-profile jobs. The pace is fast! This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing. Why Clayco? 2025 Best Places to Work - St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal. 2025 ENR Midwest - Midwest Contractor (#1). 2025 ENR Top 100 Design-Build Firms - Design-Build Contractor (Top 5). 2025 ENR Top 100 Green Contractors - Green Contractor (Top 3). 2025 ENR Top 25 Data Center Builders - Data Center Contractor (Top 3). Benefits Discretionary Annual Bonus: Subject to company and individual performance. Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Gray Construction is looking to add a Japanese Speaking Project Engineer with a Mechanical Engineering background to their Charlotte, NC or Atlanta, GA office. Responsibilities Why Gray? Gray is a fully integrated, global service provider deeply rooted in engineering, design, and construction, along with smart manufacturing and equipment manufacturing services. Consistently ranked as a leader in the industry, we focus on the following markets for domestic and international customers: Food & Beverage , Manufacturing , Data Centers , Distribution , Commercial and Advanced Technology . Founded in 1960, Gray has grown to encompass a complementary family of brands designed to augment and enhance each other's specialized capabilities without gaps or redundancies. Our robust offering-which includes strategy, operational improvements, construction, extensive engineering, automation & controls, and equipment manufacturing-enables us to create one-of-a-kind solutions at the highest levels of customization, delivering unmatched precision and partnership to some of the world's most sophisticated organizations. Develop, update and monitor job progress using QMS program, including scheduling, estimating and budgeting to ensure that construction of project parallels with schedule. Perform quantity take off(s), cost estimates and bid solicitation. Provide research options and regulation information as required. Purchase and coordinate the delivery of certain materials for the project(s) ensuring optimum prices, quality and conformance to specifications and budget. Reviews and approves invoices and change orders. Negotiate with subcontractors and vendors for specific trades ensuring that all scope is encompassed. Review vendor and subcontractor shop drawing submittals for construction as directed by the supervisor. Relocate to specific job sites (if required) in order to become familiar with procurement and construction practices. Attend weekly job site meetings. Assist in the preparation of various reports to assist in the successful management of the project(s), such as: monthly red files, progress analysis/schedules, billings and status reports. Assist in the organization and maintenance of job files to ensure continuity of work flow. Submit verbal and written reports on project status to supervisor. Communicate effectively with customer, direct consultants and subcontractors on the project(s). Responsible for the communication, implementation and enforcement of Gray's safety program on site. Other duties may be assigned. Qualifications Bachelor's degree from four-year college or university and a minimum of three years related experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet and e-mail applications. May also require working knowledge of scheduling applications. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be physically present in Birmingham office. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime may be required. Some travel may be required. Supervisory Responsibilities Indirectly supervises the activities of subcontractors and field personnel. EEO Disclaimer Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. The Role We Want You For The construction Project Engineer will be based on the construction project site and will service our clients in a multi-state region and may even travel across the country. You will have the opportunity to build large, complicated, iconic design-build projects $30 million and above. In this role you will be part of a team responsible for taking projects from conceptual stages through closeout. The Specifics of the Role Build client and subcontractor relationships. Team with Architects, Engineers, and Planners to create and manage a design schedule. Assist in the establishment of project forecasts and budgets. Manage costs. Accept responsibility for project execution. Mentor and develop Interns and new incoming project management staff. Requirements Bachelor's Degree in Construction Management, Engineering, Architecture or related. 0 to 5 years of experience managing construction projects, ideally design-build. Demonstrated knowledge of construction principles, practices, and technology. Previous experience on a successful project management team. Ability to walk a job site, climb ladders, and scale multi-floor scaffolding. Ability to lift objects of at least 50 lbs. Some Things You Should Know Our clients and projects are nationwide - Travel will be required. No other builder can offer the collaborative design-build approach that Clayco does. We work on creative, complex, award-winning, high-profile jobs. The pace is fast! This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing. Why Clayco? 2025 Best Places to Work - St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal. 2025 ENR Midwest - Midwest Contractor (#1). 2025 ENR Top 100 Design-Build Firms - Design-Build Contractor (Top 5). 2025 ENR Top 100 Green Contractors - Green Contractor (Top 3). 2025 ENR Top 25 Data Center Builders - Data Center Contractor (Top 3). Benefits Discretionary Annual Bonus: Subject to company and individual performance. Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Compensation Salary: $85,000-$95,000 + Hiring Bonus At Clark Pacific, exciting building projects are just the beginning! As the West Coast's leading prefabricator of building systems, our talented team of professionals bridge the gap between construction and manufacturing every day, providing solutions and innovations that deliver high-performance structures with enhanced cost, schedule, and safety. It all starts with the Clark Pacific Employee Experience: top talent people working together in an environment that fosters collaboration, growth & development, and compassion. We are great people doing great things, together! We have over 60 years of experience and have successfully contributed to some of the West Coast's most iconic buildings including the Golden 1 Center, the Apple II Campus, the San Francisco 49ers stadium, and the Stanford Escondido Village Graduate Housing to name just a few. When people want to experience, quality, and a partner they can trust, they choose Clark Pacific. Repeat customers, numerous building and environmental stewardship awards, and great employees are some of the things for which we are most proud and grateful. Clark Pacific is seeking a Project Engineer to support our Ontario location. Overview of the position: At Clark Pacific, the Project Engineer is a position that facilitates the successful design, fabrication, and installation of architectural and structural building systems. Working as part of an integrated team within a specific business unit, this role applies engineering, project management, problem solving, and communication skills across all levels and disciplines within the organization, significantly contributing to the project success of some of the West Coast's most iconic and exciting prefabricated buildings. Initial activities pertaining to the Design Phase, including, but not limited to: Submittal drawings (floor plans, elevations, material specifications, connection details, Reinforcing details, General panel details, Design approvals, Reinforcement drawings, and Miscellaneous metal drawings. Manufacturing-related activities pertaining to the Production Phase, including, but not limited to: Providing complete shop drawings (panel elements, structural elements, formwork, form change studies, Birdseye, stripping and yard handling studies to facilitate manufacturing, Ensuring purchasing of all required materials and forms, Design lifting hardware, loops, rigging, brackets, and inserts for stripping and handling forces, Provide and maintain a casting schedule, Perform quality checks, and Engage in start-up meetings with manufacturing, and remain engaged throughout each project's life cycle. Field-related activities pertaining to the Erection Phase, including, but not limited to: Preparing crane studies, rigging diagrams, and the overall project erection plan as well as erection sequence, load lists, and diagrams, Coordinate shipping of miscellaneous metal, Coordinate field manpower requirements with Field & Trucking team to alignment to budget, Ensure fall protection plan is in place, Professionally represent the Company at the field erection site, and Inspect erection quality and performance to plan and budget. General project management including, but not limited to: Project performance to contract specifications, budget, and time commitments, Issue identification, problem-solving, resolution, and escalation (as necessary), Coordinate necessary and requested procedure submittals (such as welding, grouting, post-tensioning, etc., Engage with internal resources throughout the Company to contribute, learn, and develop professionally. Preferred Education and Experience BS in Civil Engineering or Mechanical Engineering, or an Engineering-related degree EIT certification preferred Core Values: Determination: Meet challenges head on! Innovation: Always look for better! Well-Being: Seek the success, health and happiness of all! Benefits: Competitive compensation, being paid on a weekly basis. Health, Dental and Vision Insurance with the options of using Kaiser and VSP for vision! Medical FSA Dependent Care FSA Employer paid life insurance paid by Clark Pacific Voluntary Ancillary Benefits such as Critical Illness, Accident Insurance and Whole life insurance. 401k matching 100% of the first 3%, then 50% of the next 2% *Benefits will be subject to a waiting period* Interested? Want to learn more? If you're a hard-working nice person who is smart and curious, and think that this position is right for you, we want to hear from you. Please apply and let's begin the journey. Welcome to Clark Pacific. Let's do great things together! Clark Pacific is an Equal Opportunity Employer Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities #LI-MV1

Must be willing to relocate to CA, and Relocation Assistance is Available. On-site Work Location: Ontario, CA, Woodland, CA or Sacramento, CA locations Compensation Salary: $85,000-$95,000 At Clark Pacific, exciting building projects are just the beginning! As the West Coast's leading prefabricator of building systems, our talented team of professionals bridge the gap between construction and manufacturing every day, providing solutions and innovations that deliver high-performance structures with enhanced cost, schedule, and safety. It all starts with the Clark Pacific Employee Experience: top talent people working together in an environment that fosters collaboration, growth & development, and compassion. We are great people doing great things, together! We have over 60 years of experience and have successfully contributed to some of the West Coast's most iconic buildings including the Golden 1 Center, the Apple II Campus, the San Francisco 49ers stadium, and the Stanford Escondido Village Graduate Housing to name just a few. When people want to experience, quality, and a partner they can trust, they choose Clark Pacific. Repeat customers, numerous building and environmental stewardship awards, and great employees are some of the things for which we are most proud and grateful. Clark Pacific is seeking a Project Engineer to support our Woodland, CA or Sacramento, CA location. Overview of the position: At Clark Pacific, the Project Engineer is a position that facilitates the successful design, fabrication, and installation of architectural and structural building systems. Working as part of an integrated team within a specific business unit, this role applies engineering, project management, problem solving, and communication skills across all levels and disciplines within the organization, significantly contributing to the project success of some of the West Coast's most iconic and exciting prefabricated buildings. Initial activities pertaining to the Design Phase, including, but not limited to: Submittal drawings (floor plans, elevations, material specifications, connection details, Reinforcing details, General panel details, Design approvals, Reinforcement drawings, and Miscellaneous metal drawings. Manufacturing-related activities pertaining to the Production Phase, including, but not limited to: Providing complete shop drawings (panel elements, structural elements, formwork, form change studies, Birdseye, stripping and yard handling studies to facilitate manufacturing, Ensuring purchasing of all required materials and forms, Design lifting hardware, loops, rigging, brackets, and inserts for stripping and handling forces, Provide and maintain a casting schedule, Perform quality checks, and Engage in start-up meetings with manufacturing, and remain engaged throughout each project's life cycle. Field-related activities pertaining to the Erection Phase, including, but not limited to: Preparing crane studies, rigging diagrams, and the overall project erection plan as well as erection sequence, load lists, and diagrams, Coordinate shipping of miscellaneous metal, Coordinate field manpower requirements with Field & Trucking team to alignment to budget, Ensure fall protection plan is in place, Professionally represent the Company at the field erection site, and Inspect erection quality and performance to plan and budget. General project management including, but not limited to: Project performance to contract specifications, budget, and time commitments, Issue identification, problem-solving, resolution, and escalation (as necessary), Coordinate necessary and requested procedure submittals (such as welding, grouting, post-tensioning, etc., Engage with internal resources throughout the Company to contribute, learn, and develop professionally. Preferred Education and Experience BS in Civil Engineering or Mechanical Engineering, or an Engineering-related degree EIT certification preferred Core Values: Determination: Meet challenges head on! Innovation: Always look for better! Well-Being: Seek the success, health and happiness of all! Benefits: Competitive compensation, being paid on a weekly basis. Health, Dental and Vision Insurance with the options of using Kaiser and VSP for vision! Medical FSA Dependent Care FSA Employer paid life insurance paid by Clark Pacific Voluntary Ancillary Benefits such as Critical Illness, Accident Insurance and Whole life insurance. 401k matching 100% of the first 3%, then 50% of the next 2% *Benefits will be subject to a waiting period* Interested? Want to learn more? If you're a hard-working nice person who is smart and curious, and think that this position is right for you, we want to hear from you. Please apply and let's begin the journey. Welcome to Clark Pacific. Let's do great things together! Clark Pacific is an Equal Opportunity Employer Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities #LI-MV1

**Compensation is between $85,000 to $95,000 DOE** **Hiring Bonus** At Clark Pacific, exciting building projects are just the beginning! As the West Coast's leading prefabricator of building systems, our talented team of professionals bridge the gap between construction and manufacturing every day, providing solutions and innovations that deliver high-performance structures with enhanced cost, schedule, and safety. It all starts with the Clark Pacific Employee Experience: top talent people working together in an environment that fosters collaboration, growth & development, and compassion. We are great people doing great things, together! We have over 60 years of experience and have successfully contributed to some of the West Coast's most iconic buildings including the Golden 1 Center, the Apple II Campus, the San Francisco 49ers stadium, and the Stanford Escondido Village Graduate Housing to name just a few. When people want to experience, quality, and a partner they can trust, they choose Clark Pacific. Repeat customers, numerous building and environmental stewardship awards, and great employees are some of the things for which we are most proud and grateful. Clark Pacific is seeking a Project Engineer to support our CA locations. Overview of the position: At Clark Pacific, the Project Engineer is a position that facilitates the successful design, fabrication, and installation of architectural and structural building systems. Working as part of an integrated team within a specific business unit, this role applies engineering, project management, problem solving, and communication skills across all levels and disciplines within the organization, significantly contributing to the project success of some of the West Coast's most iconic and exciting prefabricated buildings. Initial activities pertaining to the Design Phase, including, but not limited to: Submittal drawings (floor plans, elevations, material specifications, connection details, Reinforcing details, General panel details, Design approvals, Reinforcement drawings, and Miscellaneous metal drawings. Manufacturing-related activities pertaining to the Production Phase, including, but not limited to: Providing complete shop drawings (panel elements, structural elements, formwork, form change studies, Birdseye, stripping and yard handling studies to facilitate manufacturing, Ensuring purchasing of all required materials and forms, Design lifting hardware, loops, rigging, brackets, and inserts for stripping and handling forces, Provide and maintain a casting schedule, Perform quality checks, and Engage in start-up meetings with manufacturing, and remain engaged throughout each project's life cycle. Field-related activities pertaining to the Erection Phase, including, but not limited to: Preparing crane studies, rigging diagrams, and the overall project erection plan as well as erection sequence, load lists, and diagrams, Coordinate shipping of miscellaneous metal, Coordinate field manpower requirements with Field & Trucking team to alignment to budget, Ensure fall protection plan is in place, Professionally represent the Company at the field erection site, and Inspect erection quality and performance to plan and budget. General project management including, but not limited to: Project performance to contract specifications, budget, and time commitments, Issue identification, problem-solving, resolution, and escalation (as necessary), Coordinate necessary and requested procedure submittals (such as welding, grouting, post-tensioning, etc., Engage with internal resources throughout the Company to contribute, learn, and develop professionally. Preferred Education and Experience BS in Civil Engineering or Mechanical Engineering, or an Engineering-related degree EIT certification preferred Interested? Want to learn more? If you're a hard-working nice person who is smart and curious, and think that this position is right for you, we want to hear from you. Please apply and let's begin the journey. Welcome to Clark Pacific. Let's do great things together! Clark Pacific is an Equal Opportunity Employer #MV-L1

Mission The mission of the Project Engineer is to support the project team to facilitate successful project outcomes by coordinating with the client, the field, vendors and subcontractors to ensure projects are built on time and within budget. Key Responsibilities Own plan and specification reviews, employ expertise to clear roadblocks for the most efficient field installation. Ensure plans and specs, submittals, RFI's and FCD's are updated in Procore, and, if plans are also printed, ensure the correct information is available in the Field. Project schedule coordination and update, constantly evaluating to ensure we are on schedule and reporting potential challenges to the project team. Price and scope change requests, ensuring that such are coordinated with the field, vendors, and the client in a timely manner. Verify the accuracy of progress drawings by reviewing them, walking the job to ensure that the drawings are accurate, and ensuring the most recent version is always available in Procore, working through Foreman and Superintendent to resolve any discrepancies. Review SIP's and Earned Hours/TRACK for accuracy and trends, reporting wins and challenges to the project team. Job Duties: In addition to the key responsibilities listed, the Project Engineer will execute the following job duties: Responsible for knowing each project budget and managing the budget, including but not limited to the accurate use of cost codes. Actively participate in developing a successful Project Plan. Maintain risk matrix, ensure that it is updated and risks are mitigated by coordinating with project team members. Serve as A-C support to subcontractors; answering submittals, questions and issues and escalating to Project Management when there is a problem. Own material tracking process Prepare schedule of values for project management review Production tracking true-up Coordination of project requirement processes including submittals and RFIs Own O&M and closeout process Identify future leaders, and work to develop others by sharing knowledge Champion of safety culture, leading by example and influencing others to be safe Requirements: Ability to read construction documents including plan set, spec book and contracts. Applied electrical experience and knowledge through accredited apprenticeship program, college programs, or relevant work experience. Ability to work under time pressure and adapt to changing requirements with a positive attitude. Self-motivated, proactive and an effective team player Interacts effectively and professionally with internal and external clients. Pay Range: $65,000 - 165,000. Pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, and experience. The total compensation package for this position may also include other elements dependent on the position offered. *A-C Electric Company is an Equal Opportunity Employer; women, veterans, and minorities are encouraged to apply.

As a Project Engineer at Graycor, you will enroll in our Engineering Mentoring Program designed to expose you with the critical hands-on experience necessary to build your successful career in construction. You will receive ongoing, specialized one-on-one training, coaching and mentoring on a variety of challenging and interesting project assignments, and a full rotation between departments. You will be actively involved in your career development, making self-assessments of your progress against established core competencies. Engineers will typically spend 24 months in the Engineer Mentoring Program before advancing to a new position with Graycor. AS A PROJECT ENGINEER, YOU WILL GAIN EXPERIENCE IN THE FOLLOWING AREAS: Project Management/ Project Controls: Assist Project Manager and Superintendent in the efficient control and management of the project, while ensuring safety and quality programs are being executed on the project site. Develop and maintain the critical path project schedule, including ongoing revisions. Assist the Project Manager and/or Superintendent in the preparation of short-term look-ahead schedules and the application of Lean Construction techniques. Maintain project documentation and expedite to the Owner, Architect, and Engineers for approval. Develop and maintain a thorough understanding of the provisions and requirements of all contract documents, including plans, specifications, owner's contract, subcontracts and purchase orders. Assist in the procurement of equipment and materials, and track and expedite their delivery. Track and evaluate subcontractor and vendor performance. Interact with subcontractors and vendors regarding technical and contractual matters. Estimating/ Preconstruction Services: Assist in the preparation of estimates and quotations to obtain project work. Assist the Project Manager and/or Estimator in bid preparation, subcontractor/vendor solicitation, evaluation and award. TO BE SUCCESSFUL IN THE GRAYCOR ENGINEERING MENTORING PROGRAM, YOU WILL NEED: Bachelor's degree in construction management, engineering, or other relevant technical discipline. 0-3 years of relevant construction internship or post-undergraduate experience. The ability to travel extensively and temporarily reside at the project site for extended periods of time, with travel home provided every other weekend. Travel subsistence pay and travel incentive bonuses may apply. Ambition to grow professionally and acquire new knowledge and skills. Our most successful Engineers are motivated to succeed and are passionate about construction across a variety of projects. Our typical project portfolio includes retail mall development, entertainment/ recreational, hospitality/lodging, office, logistics/distribution and cold storage, manufacturing, and green/ LEED building industries. The fortitude to juggle competing priorities in a fast-paced environment. Multi-tasking with a sense of urgency while maintaining strong attention to detail and accuracy is crucial. Effective communication skills, with the ability to interact professionally with managers, co-workers, subcontractors, and construction craft employees. Problem solving and critical thinking skills. Working knowledge of MS Office Suite. Additional basic knowledge of scheduling, estimating and takeoff software is a plus. We use Primavera P6, WinEst and On-Screen Takeoff.

John Moriarty & Associates of Virginia (JMAV) is seeking a full-time Project Engineer (PE) to support construction project execution from preconstruction through closeout in the Washington, DC metro area. The PE will assist with scheduling, procurement, subcontractor coordination, document management, and project logistics. The PE should be located within daily driving distance of the Washington, DC metro area and can expect to travel between different jobsites as needed. Roles & Responsibilities: The Project Engineer will work closely with the PM and site team on a wide range of tasks, including: Management of assigned trades in all facets of preconstruction to include quantity take-offs, preparation of bid packages, and buy-out Oversee performance of assigned trades, including project status, schedule, cost control, change management systems, and maintain relationships with clients, designers, and consultants Supporting the creation and maintenance of project schedules Assisting with submittals, RFIs, and change order processing Coordinating project documentation and digital records Communicating with subcontractors and vendors Education: 4-year degree in Construction Management or related field required Work Experience: 3-5 years of experience required, in commercial construction is preferred Knowledge, Skills, and Abilities: Strong critical thinking and proactive problem-solving abilities Highly organized with attention to detail Effective communicator and team collaborator Strong multitasking and decision-making skills Ability to travel daily across DC-Metro area jobsites Proficiency in Microsoft Office and construction platforms Physical Requirements: Moderate physical activity; driving, walking rough terrain, climbing stairs/ladders Work Environment: Onsite, outdoor work in all weather conditions; moderate to loud noise exposure The Company: John Moriarty & Associates of Virginia (JMAV) is a privately held general contractor that specializes in large-scale, urban, ground-up projects such as mixed-use, multi-family, hotels, senior living, student housing, and bio-medical in the DC-Metro area. Exceptional for the industry, the majority of our projects are negotiated with over 85% being with repeat clients. Our approach is characterized by transparency, collaboration, attention to detail and hands-on leadership. Our projects are set up for success by our strong emphasis on pre-construction services and planning, proper staffing and hiring best-in-class subcontractors. Our growth has been a result of outstanding execution in every phase of project delivery and an unparalleled employee retention of the industry's best talent. Our parent company, John Moriarty & Associates (JMA), was founded in 1985 in Winchester, MA and is one of the most respected general contracting firms in the industry. Learn more about us at ************** and ************* John Moriarty & Associates of Virginia participates in E-Verify for all hired employees. E-Verify is a web-based system that allows enrolled employers to confirm the eligibility of their employees to work in the United States by electronically matching information provided by employees on the Form I-9 against records available to the Social Security Administration and the Department of Homeland Security. More information can be found at *****************

Kitchell is seeking an experienced and dedicated Project Engineer to join our Northern California region in Jamestown, CA and build a long-term career at one of the most innovative and growth-oriented building companies in the United States. Overview Assist with the execution of CM services over an Design Build Healthcare construction project. Duties and Responsibilities Provides project support with the construction documentation process which includes RFI's, Submittals, Change Orders, Schedules, and Warranties/Operations/Maintenance manuals. Participate in As-Built documentation processes while in construction and at Closeout. Assist with all DSA documentation during construction in preparation for Closeout/Certification. Assist with verbal and written communications to the District, Architects, and Contractors. Maintain project documents through completion and certification. Participate in coordination of project meetings and prepare and distribute meeting minutes. Assist with performing change order analysis. Assist with project Punchlist development, tracking, and resolution. Assist the Project Manager/Construction Manager with preparing project reports. Perform other duties as required to ensure project success. Experience and Education Bachelor's Degree in Engineering, Construction Management, or Architecture is preferred. 2 or more years of experience assisting Construction/Project Managers on construction project is preferred. Experience working on vertical building public sector projects such as commercial buildings, courthouses, K-12, Hospitals, Public Safety, Higher Education, Civic and Municipal. Knowledge and Skills Strong verbal, writing, and computer skills are required. Ability to perform construction quantity take-offs and assist with Change Order evaluations required. Strong understanding of the DSA approval and certification process is strongly preferred. Proficient user skills with the MS Suite of tools and Bluebeam are required. Working knowledge of standard industry tools such as P6 and Procore is strongly preferred. Knowledge of construction estimating, scheduling, general construction principles, techniques, and site safety is strongly preferred. License and Certifications Valid driver's license with an acceptable motor vehicle record, free from suspensions or restrictions, is required. Travel Requirements Position based in Sacramento region, with potential to work from headquarters and later transfer to the project site. Requires potential travel once a month up to 100 miles and availability to travel between projects and offices as needed and when required by the project. Work Environment While performing the duties of this job, the employee must regularly work in an office and or construction environment. Conditions regularly include exposure to outdoor elements, hot/cold temperatures, wet conditions, noise, atmospheric conditions, and cramped quarters. The noise level in the work environment is occasionally loud. Physical Requirements While performing the duties of this job, the employee must regularly sit, stand, walk, talk or hear and use hands to finger, feel and handle; frequently reach with hands and arms; occasionally climb or balance and stoop, kneel, crouch or crawl. Specific vision abilities required by this job include close vision, distance vision, depth perception and ability to adjust focus. Must frequently lift and or move 10 pounds and occasionally lift and or move up to 50 pounds. ABOUT OUR COMPANY Founded in 1950, Kitchell began as a commercial contracting business and over the years developed new talents and enterprises, acquiring complementary businesses and expertise to remain competitive. Today, Kitchell Corporation serves as the holding entity for several companies that are integral to Kitchell's core business, as well as those that operate independently. We provide a wide range of services within the built environment, including general contracting, construction management, development, facilities management, engineering, architecture, and myriad other services. Our employees manage projects from our main offices located in Arizona, California, and Texas. We offer an entrepreneurial environment that fosters personal and professional growth through in-house education programs, formal and informal mentoring, and cross-training opportunities. At Kitchell, we prioritize internal growth and building careers from within. We consistently rank among the top places to work, thanks to our tenured staff and outstanding benefits that are designed to enrich our employees' physical, mental, emotional, and financial well-being. These benefits include company performance bonuses, discretionary stock options, incentive bonuses, health, and life insurance, health savings accounts (HSA) with wellness incentives, flexible spending accounts (FSA), 401(k) plans with a 4% company match, tuition reimbursement, weight loss programs, discounted auto insurance, identity theft protection, rewards programs, and much more. Kitchell is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status. The annual base salary range for this role is currently the following for the specific levels Project Engineer I $72,000 - $80,000 Yearly The Company's salary ranges are determined by role, level, location, and alignment with market data. Individual pay is determined through interviews and an assessment of various factors, including job-related skills, relevant education and experience, abilities of the applicant and equity with other team members. The annual base salary range listed here is subject to change at any time, in the Company's discretion, and does not alter in any way the at-will nature of the employment relationship.

As a strong and stable company since 1960, Holder provides nationwide construction management services on complex projects in the aviation, office, technology, education, hospitality, and interiors markets. Our mission is to provide clients with quality construction services, across the country, supported by our offices in Atlanta, Charlotte, Columbus, Dallas, Denver, Phoenix, San Jose and Washington, DC. At Holder, our most valuable resources are our people, who carry forth our core values, brand, and reputation for performance. We are seeking a highly motivated Electrical Design Engineer to join our team in the Herndon or Atlanta that will support Mission Critical construction operations throughout the country. The ideal candidate for this job is a team player who thrives in a challenging and fast-paced yet supported environment. Your job is to do whatever it takes to help the team succeed. Required Experiences And Skills Has experience with the design process and management of complex Mission Critical projects, including processes, teams, and deliverables Understands risks and roles associated with varying project delivery methods Understands principals of contract documents and agreements Takes initiative to identify, track and actively address design and engineering challenges during the design and construction phases of a project. Ability to read construction drawings and specifications with primary experience with electrical and controls. Understanding and able to reference and apply National Electrical Code (NEC) standards and requirements. Ability to proactively articulate design document expectations and assess actual document status by phase (SD, DD, CD) Ability to conduct cross-discipline drawing coordination and design completion/quality reviews specifically for the MEP disciplines. Can contribute constructability, technical expertise and engineering solutions to a project's design evolution Ability to lead and manage the creation of Integrated Electrical Room concepts based on client or projected selected equipment. Ability to manage subcontractors in the completion of integrated design concepts to finalized products ready for manufacturing. Outstanding communication and time management skills Ability to work in a highly-collaborative environment Ability to work with minimal supervision; self-starter Ability to coach and mentor junior associates Manage deadlines, maintain files, and provide reporting to department leadership and/or jobsite leadership Requirements For This Position Include Candidate will preferably have 3-5+ Years in an Engineering position. Excellent verbal and written communication skills - ability to effectively communicate across projects and departments with associates of varying skill level. Also, be able to effectively communicate with third party organizations and consulting entities. Earn the trust of associates but maintain ability to independently assess and evaluate issues. Ability to have difficult conversations, free of emotion. Have a high level of morality and ethics. Proactively adjust priorities based on department, project and company needs and communicate adjustments. Be strategic and solutions/goal oriented and detail-oriented, but flexible to changes in plan. Independent worker with a collaborative mindset. Ability to effectively collect information and ask questions, analyze, evaluate, and make recommendations and then organize the appropriate teams for group decision making. Good listener and detail oriented. Escalate issues timely. Ability to innovate and comfortable being introduced to new technology. Maintains a continuous improvement mindset. Proficient in Microsoft based software including Word, Excel, Outlook, and PowerPoint. Highly organized, detail oriented. Coach and mentor others with meaningful feedback. Open to receiving meaningful feedback. Be open to additional responsibilities as role and department services evolve.

About us Redwood Electric Group is a large business providing electrical construction and design services. We operate throughout the Greater Bay Area with offices in Santa Clara, San Leandro, Vacaville, and Sacramento. At Redwood Electric Group, our philosophy is focused on the commitment to our customers. Their success is a direct reflection of our success. Our business continues to reflect strong growth through innovation and our team's commitment to exceed customer expectations. Duties/Responsibilities: Develop and refine electrical system layouts, schematics, and specifications. Review and process equipment and system submittals to ensure compliance with project requirements. Prepare and modify drawings, ensuring accuracy and clarity in design documentation. Utilize AutoCAD, Revit, and engineering analysis software for system design and documentation. Conduct power system analysis, including short circuit, voltage drop, and arc flash studies. Perform load calculations, lighting level analysis, and energy efficiency assessments. Support equipment selection, panel schedules, and system coordination. Ensure all designs adhere to NEC, energy codes, and client-specific guidelines. Collaborate with multidisciplinary teams to integrate electrical designs into overall project plans. Attend meetings with clients, architects, and contractors to resolve design issues and refine project scope. Conduct site visits to evaluate existing electrical conditions and support field installations. Contribute to the continuous improvement of our design processes. Provide engineering support during construction to ensure successful project execution. Required Skills/Abilities: Strong knowledge of electrical engineering principles, including power distribution and lighting systems. Proficiency in AutoCAD, Revit, and engineering analysis software. Familiarity with NEC and other relevant electrical codes and standards. Ability to analyze and interpret electrical specifications and technical documents. Effective problem-solving skills and the ability to manage multiple tasks. Actively contribute to a collaborative team environment, where your expertise and innovative ideas are highly valued. Strong communication skills, both written and verbal. Education and Experience: Bachelor's degree in Electrical Engineering, Architectural Engineering, or a related field. Minimum of 2 years of experience in electrical design or engineering within the construction industry. Engineer-In-Training (EIT) certification preferred, with encouragement to pursue Professional Engineer (PE) licensure. Experience with commercial, high-rise residential, or data center projects is appreciated. LEED AP certification is appreciated. Proficiency in Microsoft Office applications (Word, Excel, Outlook). Working Conditions This position is based in our Santa Clara office and is not eligible for remote work. Work may be performed in an office or on active job sites, depending on role and project needs. Office work includes sitting, typing, and using a computer for extended periods. Field environments may involve walking, standing, bending, or lifting materials (up to 30 lbs). Noise levels range from quiet (office) to high (job sites). May require occasional travel to project locations or meetings. REG will provide reasonable accommodations as required by the ADA and applicable state law. Disclaimer The duties and responsibilities listed above are representative of the work typically performed in this role but are not intended to be a comprehensive list. Actual responsibilities may vary depending on department needs, project scope, or business requirements. Employees may be assigned additional tasks as needed to support company goals and operations.

As a strong and stable company since 1960, Holder provides nationwide construction management services on complex projects in the aviation, office, technology, education, hospitality, and interiors markets. Our mission is to provide clients with quality construction services, across the country, supported by our offices in Atlanta, Charlotte, Columbus, Dallas, Denver, Phoenix, San Jose and Washington, DC. At Holder, our most valuable resources are our people, who carry forth our core values, brand, and reputation for performance. We are seeking a highly motivated Electrical Design Engineer to join our team in the Atlanta that will support Mission Critical construction operations throughout the country. The ideal candidate for this job is a team player who thrives in a challenging and fast-paced yet supported environment. Your job is to do whatever it takes to help the team succeed. Required Experiences And Skills Has experience with the design process and management of complex Mission Critical projects, including processes, teams, and deliverables Understands risks and roles associated with varying project delivery methods Understands principals of contract documents and agreements Takes initiative to identify, track and actively address design and engineering challenges during the design and construction phases of a project. Ability to read construction drawings and specifications with primary experience with electrical and controls. Understanding and able to reference and apply National Electrical Code (NEC) standards and requirements. Ability to proactively articulate design document expectations and assess actual document status by phase (SD, DD, CD) Ability to conduct cross-discipline drawing coordination and design completion/quality reviews specifically for the MEP disciplines. Can contribute constructability, technical expertise and engineering solutions to a project's design evolution Ability to lead and manage the creation of Integrated Electrical Room concepts based on client or projected selected equipment. Ability to manage subcontractors in the completion of integrated design concepts to finalized products ready for manufacturing. Outstanding communication and time management skills Ability to work in a highly-collaborative environment Ability to work with minimal supervision; self-starter Manage deadlines, maintain files, and provide reporting to department leadership and/or jobsite leadership Requirements For This Position Include Candidate will preferably have 3-5+ Years in an Engineering position. Excellent verbal and written communication skills - ability to effectively communicate across projects and departments with associates of varying skill level. Also, be able to effectively communicate with third party organizations and consulting entities. Earn the trust of associates but maintain ability to independently assess and evaluate issues. Ability to have difficult conversations, free of emotion. Have a high level of morality and ethics. Proactively adjust priorities based on department, project and company needs and communicate adjustments. Be strategic and solutions/goal oriented and detail-oriented, but flexible to changes in plan. Independent worker with a collaborative mindset. Ability to effectively collect information and ask questions, analyze, evaluate, and make recommendations and then organize the appropriate teams for group decision making. Good listener and detail oriented. Escalate issues timely. Ability to innovate and comfortable being introduced to new technology. Maintains a continuous improvement mindset. Proficient in Microsoft based software including Word, Excel, Outlook, and PowerPoint. Highly organized, detail oriented. Coach and mentor others with meaningful feedback. Open to receiving meaningful feedback. Be open to additional responsibilities as role and department services evolve.

Delta Construction Partners is a national executive search firm for the nation's premier electrical and general contractors and industry professionals. Delta has been retained by a confidential client to conduct a search for an Electrical Engineer in Burlington, TX. Electrical Engineer Compensation & Benefits: Competitive base salary Bonus opportunities Medical, dental, vision, life, and disability insurance Paid time off + paid holidays Tuition reimbursement + continuing education support 401K retirement plan with employer match Paid maternity leave Military Reserve pay offset Electrical Engineer Key Responsibilities Maintain technical documentation, maintenance logs, and recurring system reports Support installation, configuration, and testing of integrated network systems in alignment with design packages Assist with staging, commissioning, and troubleshooting during project execution Stay current on advancing technologies and product capabilities through weekly industry research Collaborate with System Engineers to ensure solutions meet operational and performance requirements Partner with the Design team to resolve technical issues and improve design accuracy Recommend workflow enhancements that reduce cost and improve efficiency for future deployments Provide ongoing operational support for high-performance computing environments Monitor system utilization and performance metrics with guidance from senior engineers Develop user-friendly documentation, operating procedures, and interface guidelines for end-users Produce material lists and support procurement for system implementation Electrical Engineer Qualifications Bachelor's Degree in Electrical Engineering, Mechanical Engineering, Industrial Engineering, Computer Science, Computer Engineering, Math or Physics preferably from an ABET accredited program 2-7+ years experience supporting technical programs of similar scope and complexity Electrical Engineer Desired Skills & Expertise Strong communication skills across multidisciplinary engineering groups Ability to manage timelines and maintain quality standards under shifting priorities Experience with MS Office Suite (Excel, PowerPoint, Word) Analytical mindset with a proactive and hands-on approach to problem solving Electrical Engineer Work Environment & Physical Expectations Regular computer usage and prolonged seated work Ability to manipulate tools, devices, and keyboards Clear verbal and written communication skills required Ability to analyze technical information and apply engineering principles to solution development Active listening and collaboration across all project levels

Are you ready to lead with precision and tackle complex challenges? As an experienced Field Engineer, you will leverage your technical knowledge to oversee critical aspects of our projects, ensuring construction work complies with all engineering standards, codes and contract specifications. Bring your diverse ideas to build stronger, more resilient communities. Apply now and transform your career with us. What you will be doing * Meets daily with project crews to review production schedule and confirm all materials, equipment and resources are readily available for production to continue on schedule and within budget. * Collects, coordinates and analysis shop drawings, design specifications, material requirements and project data through the duration of the project to ensure quality and contract specification compliance. * Provides technical input for project work plan and scheduling. Identifying risk elements of production, materials, equipment or process that could negatively impact the budget or schedule. * Evaluates daily production, schedule and budget projections to accurately track project performance. Documents daily activities in Company approved methods and technologies. * Remits accurate project quantity input and controls using assigned project cost coding to ensure project financials are accurately reported. Manages cost coding with Company finance and accounting teams regarding employee time, materials, equipment and subcontractor needs. * Reviews and approves daily timecards for all Company construction crews. Works with Office Manager, payroll and job construction supervisors to resolve timecard inquiries, as needed. * Reviews project specifications for quality assurance at the beginning of work, during the project work and after work completes. Initiates and manages appropriate certificates, inspections and other documentation regarding construction production on the project site. * Works with construction crews and engineering leaders to plan field layout on the project site, ensuring appropriate utility and commercial lines are marked before production begins. Initiates and manages any permits needed before work can begin. * Assists the development of design drawings and provides technical input, as needed. * Coordinates subcontractor work methods, schedule and crews as needed. What we are looking for * Bachelor's Degree in a related field required. * 1+ years of construction engineering experience required. * Beginner knowledge of construction equipment & techniques, drawing & specifications, building materials and required standards applicable to the project. * Ability to assume responsibility, interface and communicate effectively with others. * Ability to manage multiple tasks efficiently and effectively in a fast-paced environment. * Knowledge of construction scheduling and production time management preferred. Why work for us Some of the benefits you may be eligible for as an employee are: * Comprehensive compensation package and paid time off program * Industry leading 401(k)/RRSP * Medical/Extended Health Care, Dental, Vision and/or Provincial Medical * Wellness benefits & Employee Assistance Program * Tuition Reimbursement Program We are an EEO/ADA/Veterans employer. Salary Min USD $90,000.00/Yr. Salary Max USD $100,000.00/Yr.