Senior Design Engineer jobs at Fluor Corporation - 23 jobs

Burns & McDonnell has an exciting opportunity for a Lead Mechanical Engineer to join the Power global practice. This position is responsible for the design and evaluation of mechanical systems associated with coal and natural gas fired generation facilities as well as associated support facilities. As a Lead Mechanical Engineer, you will be responsible for front-end planning/preliminary design/code analysis; final design including bidding document and specification preparation; construction administration including review of compliance submittals and resolution of construction issues; and interfacing with Burns & McDonnell project managers, equipment suppliers, clients, other engineering disciplines, detailers, and designers. This person will perform work which involves conventional engineering practices but may involve a variety of complex features. Preferred applicants must be capable of devising new approaches to problems encountered and that may involve the following detailed aspects of work assignments: Responsibilities include: + Develop cost opinions, work plans, and schedules, as well as conduct and coordinate work requiring judgment in the independent evaluation, selection, adaptation and modification of standard engineering techniques, procedures, and criteria + Provide leadership guidance and instruction to less experienced staff members. + Regularly meets and corresponds with clients or outside personnel. + Lead mechanical design projects related to natural gas and coal fired generation facilities + Air Quality Control Systems and Effluent Limitation Guideline Management + Equipment sizing and application + Hydraulic calculations and associated pump selection, sizing, and application + Pipe and valve selection and sizing + Pipe material selection including fittings, gaskets, etc. + Pipe supports and pipe routing + P&ID's + Mechanical Equipment Condition Assessment and Lifecycle cost analysis + Plumbing (sanitary & potable water) + Pumping/piping any fluid or gas, including blowers, steam & compressed air + Tank/vessel selection and sizing + Selection and location of instrumentation associated with pumps, vessels, and tanks + Other duties as assigned Qualifications + Bachelor of Science in Mechanical Engineering or related degree from an ABET accredited program. May also have a Bachelor of Science in Mechanical or related Engineering Technology from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam. The completion of a master's degree in a related field may be substituted for one year of experience. + 7 years related mechanical experience required; EPC project experience preferred + Professional Engineering (PE) license is preferred + Candidate must have excellent written and verbal communication skills, as well as strong analytical and problem-solving skills. + This position requires an individual capable of applying intensive and diversified knowledge of principles and practices to a broad area of assignments. + Experience in the use of Arrow, Fathom, SmartPlant P&ID a plus. + Candidate must be capable of devising new approaches to solve complex problems. This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans Job Mechanical Engineering Primary Location US-MO-Kansas City Other Locations US-MO-Saint Louis, US-AZ-Phoenix, US-TX-Houston, US-NC-Raleigh, US-FL-Orlando, US-NC-Charlotte, US-OH-Columbus Schedule: Full-time Travel: Yes, 25 % of the Time Req ID: 260018 Job Hire Type Experienced #LI-VR #PWR

Burns & McDonnell is a company made up of more than 8,000 engineers, architects, construction professionals, scientists, consultants, and entrepreneurs with offices across the country and throughout the world. Burns & McDonnell has exciting opportunities for those interested in growing their careers in one of the most fast paced, innovative sectors of high tech building design and construction. Project focus would be mission-critical data center projects. This opportunity hires directly into our Mission Critical team and into a multibillion-dollar industry that is growing at an exponential rate. Data Centers are an aggressive market for Burns & McDonnell and are highlighted by several priority articles on our site. Mission Critical is an international practice for Burns & McDonnell that involves exciting, collaborative work across many different departments. Specific areas of responsibility include the following: + Designing mechanical systems/equipment to provide for a useful and safe workplace. + Advise clients regarding mechanical systems/requirements available to meet their needs and comply with safety codes. + Monitor installation of designed equipment/systems to ensure compliance with design specifications and safety codes. + Participate in developing the design criteria for air and water side of building mechanical systems. + Reviews mechanical designs and specifications of equipment or systems being purchased or fabricated. + Developing concept studies and design. + Additional opportunity exists to develop Project Management skills: + Assist Project Managers with day-to-day management of project execution, deliverables, quality, schedule, contracts, subcontracts, proposals, and client interface. + Facilitate and execute contract administration responsibility for RFIs, submittals, change management and claim mitigation. + Assist in project reporting status, risks, schedule and cost. + Enforces standards and practices. **Qualifications** Required Criteria: + Bachelor's degree in engineering from accredited program is required. + Minimum of 7 years of related mechanical design experience. + Knowledge of mechanical design principles, standards, and codes. + Expert software and computer skills required including AutoCAD, BIM (Revit), 3D Rendering Programs, and Microsoft Professional Office software (Excel, Word, PowerPoint). + Strong technical, written, and verbal communication skills are required. + EIT professional designation with ambition to attain PE license. Preferred Criteria: + Data center or telecommunication facility experience. + Computational Fluid Dynamics (CFD) Modeling with either Autodesk Computational Fluid Design software or 6Sigma, preferably with data centers. + Knowledge of critical facility electrical design. + Ability to write specifications for mechanical equipment, devices, and material. + Familiarity with other building systems and coordination with those systems and components. This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans **Job** Mechanical Engineering **Primary Location** US-OH-Columbus **Schedule:** Full-time **Travel:** Yes, 25 % of the Time **Req ID:** 251362 **Job Hire Type** Experienced #LI-EH #GFS

**Requisition ID:** 179455 **Job Level:** Mid Level **Home District/Group:** Kiewit Industrial & Water Engineering **Department:** Design Engineering **Market:** Industrial **Employment Type:** Full Time **_If you are viewing this position on other websites, we recommend you apply to the position directly at our website at ********************** We are adding several Mid level and Senior level Mechanical Engineers to support our growing Industrial division. We are looking for experienced design engineers who know how to delivery specifications, size components and equipment develop drawings and P&IDs and related documentation for Industrial Facilities. We specialize in balance of plant design working through conceptual, through final design, into construction. If you have experience with EPC projects performing these functions, we would love to talk with you. Our projects could include the design of low and medium voltage power, balance of plant design, biogas facilities, bulk solids material handling, water and wastewater treatment facilities, mining facilities, and data centers. As we move into hyperscale data center facilities, we are looking for individuals with experience with boilers and chillers, cooling distribution units (CDU's), Computer room handling units (CRAH), fan walls, and containment modules for air cooling. We are looking for great communicators, desire to work as part of a dynamic team, and want to grow into leadership/senior positions. This is a great opportunity for you to showcase your mechanical design skills and implement innovative solutions and make a lasting impact, as Kiewit continues to expand in the Industrial marketplace. If you desire to diversify your experience, and work on different types of facilities, and want to work on EPC, large scale projects, we want to talk with you. We are an employee-owned company which fosters dedication and commitment to project success and are positioned as a key player in meeting growing electricity demands. At Kiewit, we believe in building more than just structures, we build relationships, strengthen communities and improve the world. With top notch health benefits, great time off, flexible work options a wealth-building 401K plan and unbeatable growth opportunities - we are deeply invested in the future of our employees. Your future is here. Join us at Kiewit, where we go beyond engineering and construction to build the road to success! We cultivate a culture of excellence, innovation and teamwork, making it the most rewarding place to build your career. **District Overview** Kiewit Engineering Group, Inc is a full-service consulting and engineering firm serving the infrastructure and engineering markets. Our combined staff of more than 3,000 engineers and design professionals have expertise that spans all major engineering disciplines to serve transportation, power, water/wastewater, mining, building, and oil, gas & chemical markets. Backed by 140 years of construction experience, our construction-driven engineering focuses on constructability and safety in the earliest phases of projects to ensure on-time and on-budget project delivery. Our rapidly growing Industrial and Water Engineering Group, which includes mechanical, process, electrical, controls, structural, architectural, geotechnical, and civil disciplines, is a multi-faceted and leading-edge division of Kiewit with best-in-class technical expertise focused on EPC and design-build delivery of industrial projects in markets such as Consumer Products, Heavy Manufacturing, Industrial Buildings, Pulp and Paper, Mineral Processing, Renewable Natural Gas, and Industrial Water and Utilities. **Location** This position can be based near one of our main Kiewit design locations - Colorado-Lone Tree, Kansas-Lenexa, Texas-Houston. Some consideration will be made for fully remote candidates that meet and exceed our requirements at a Senior Mechanical Engineering level. We offer relocation assistance to the district office in Lenexa Kansas. **Responsibilities** + Provide design, coordination, and oversight of various mechanical systems typical for biogas, bulk solids material handling, water and wastewater treatment, pump stations and pipeline conveyance, groundwater remediation, stormwater recycling, and other industrial facilities including, but not limited to, process piping, conveying systems, dust collection, general plant/facility water, compressed air, steam, and gas systems. Mechanical system design includes preparing calculations for both pressurized and gravity driven systems to size lines, material selection, and correct Code requirement application. + Perform design calculations and equipment specifications typical for biogas, bulk solids material handling, water and wastewater treatment, pump stations and pipeline conveyance, groundwater remediation, stormwater recycling, and other industrial facilities including, but not limited to, bulk solids conveyors, dust collection equipment, bins/tanks, pumps, heat exchangers, boilers, and other process equipment. + Coordinate and communicate all aspects of the project's mechanical design within multi-disciplinary teams; including the management and oversight of third party engineering, as well as coordinate vendor packages and work on vendor submittals and selection. + Review project contracts, customer Requests for Proposals (RFPs), professional service agreements, or other contractual documents and incorporate into the design as required to ensure the project meets or exceeds project goals. + More Senior engineers may provide oversight and coordination of projects, working with the assigned design managers and project managers, to meet project budgets and schedules for all mechanical discipline activities. + Manage other design partners (both internal and external) including construction partners, equipment suppliers, and other engineers and designers assigned to the project or task and review work progress and results. + Perform detailed technical bid analyses for equipment typical for biogas, bulk solids material handling, water and wastewater treatment, pump stations and pipeline conveyance, groundwater remediation, stormwater recycling, and other industrial facilities. + Generate deliverables such as PFD's, P&ID's, datasheets, and vendor shop drawings in accordance with industry codes and standards, contract requirements, and company standards. + Support the construction team including representing the design team on-site, answering RFI's, providing creative design solutions, etc. + Senior Engineers may lead projects, and develop schedules, work assignments, and staffing requirements to ensure successful project completion. + Perform early project design work such as conceptual studies, process flow diagram development, mass/energy balances, preliminary equipment sizing and selection, and general facility layout/arrangement. + Train, mentor, and advise more junior staff on proper application of industry standards and best practices. **Qualifications** + Bachelor's degree in mechanical engineering or equivalent engineering program from an ABET accredited four-year university. + Engineer-In-Training (EIT) certification required; Professional Engineer (P.E.) preferred or willing to obtain. + A minimum of 3 years of industry related engineering experience performing the functions as outlined above for Industrial facilities. Experience with mechanical design for data centers highly desired or experience with cooling distribution units (CDU's), Computer room handling units (CRAH), fan walls, and containment modules for air cooling for industrial facilities.. + Experience leading an engineering and design team and EPC projects for industrial facilities listed above would be required for a more senior level position + Strong organizational and time management skills. + Strong written and verbal communication skills. + Proficient in basic computing programs including the Microsoft Office suite (Word, Excel, Outlook, PowerPoint). + Preferred experience utilizing AFT Fathom or AFT Arrow hydraulic simulation software (or equivalent). \#LI-JB1# Other Requirements: - Regular, reliable attendance - Work productively and meet deadlines timely - Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment - Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. - Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. Base Compensation: $100,000/yr - $104,000/yr (Actual compensation is subject to variation due to such factors as education, experience, skillset, and/or location) This posting will be active from: 01/22/2026 - 04/07/2026 We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status. Company: Kiewit

Job Level: Mid Level Home District/Group: Kiewit Industrial & Water Engineering Department: Design Engineering Market: Industrial Employment Type: Full Time If you are viewing this position on other websites, we recommend you apply to the position directly at our website at ******************* We are adding several Mid level and Senior level Mechanical Engineers to support our growing Industrial division. We are looking for experienced design engineers who know how to delivery specifications, size components and equipment develop drawings and P&IDs and related documentation for Industrial Facilities. We specialize in balance of plant design working through conceptual, through final design, into construction. If you have experience with EPC projects performing these functions, we would love to talk with you. Our projects could include the design of low and medium voltage power, balance of plant design, biogas facilities, bulk solids material handling, water and wastewater treatment facilities, mining facilities, and data centers. As we move into hyperscale data center facilities, we are looking for individuals with experience with boilers and chillers, cooling distribution units (CDU's), Computer room handling units (CRAH), fan walls, and containment modules for air cooling. We are looking for great communicators, desire to work as part of a dynamic team, and want to grow into leadership/senior positions. This is a great opportunity for you to showcase your mechanical design skills and implement innovative solutions and make a lasting impact, as Kiewit continues to expand in the Industrial marketplace. If you desire to diversify your experience, and work on different types of facilities, and want to work on EPC, large scale projects, we want to talk with you. We are an employee-owned company which fosters dedication and commitment to project success and are positioned as a key player in meeting growing electricity demands. At Kiewit, we believe in building more than just structures, we build relationships, strengthen communities and improve the world. With top notch health benefits, great time off, flexible work options a wealth-building 401K plan and unbeatable growth opportunities - we are deeply invested in the future of our employees. Your future is here. Join us at Kiewit, where we go beyond engineering and construction to build the road to success! We cultivate a culture of excellence, innovation and teamwork, making it the most rewarding place to build your career. District Overview Kiewit Engineering Group, Inc is a full-service consulting and engineering firm serving the infrastructure and engineering markets. Our combined staff of more than 3,000 engineers and design professionals have expertise that spans all major engineering disciplines to serve transportation, power, water/wastewater, mining, building, and oil, gas & chemical markets. Backed by 140 years of construction experience, our construction-driven engineering focuses on constructability and safety in the earliest phases of projects to ensure on-time and on-budget project delivery. Our rapidly growing Industrial and Water Engineering Group, which includes mechanical, process, electrical, controls, structural, architectural, geotechnical, and civil disciplines, is a multi-faceted and leading-edge division of Kiewit with best-in-class technical expertise focused on EPC and design-build delivery of industrial projects in markets such as Consumer Products, Heavy Manufacturing, Industrial Buildings, Pulp and Paper, Mineral Processing, Renewable Natural Gas, and Industrial Water and Utilities. Location This position can be based near one of our main Kiewit design locations - Colorado-Lone Tree, Kansas-Lenexa, Texas-Houston. Some consideration will be made for fully remote candidates that meet and exceed our requirements at a Senior Mechanical Engineering level. We offer relocation assistance to the district office in Lenexa Kansas. Responsibilities * Provide design, coordination, and oversight of various mechanical systems typical for biogas, bulk solids material handling, water and wastewater treatment, pump stations and pipeline conveyance, groundwater remediation, stormwater recycling, and other industrial facilities including, but not limited to, process piping, conveying systems, dust collection, general plant/facility water, compressed air, steam, and gas systems. Mechanical system design includes preparing calculations for both pressurized and gravity driven systems to size lines, material selection, and correct Code requirement application. * Perform design calculations and equipment specifications typical for biogas, bulk solids material handling, water and wastewater treatment, pump stations and pipeline conveyance, groundwater remediation, stormwater recycling, and other industrial facilities including, but not limited to, bulk solids conveyors, dust collection equipment, bins/tanks, pumps, heat exchangers, boilers, and other process equipment. * Coordinate and communicate all aspects of the project's mechanical design within multi-disciplinary teams; including the management and oversight of third party engineering, as well as coordinate vendor packages and work on vendor submittals and selection. * Review project contracts, customer Requests for Proposals (RFPs), professional service agreements, or other contractual documents and incorporate into the design as required to ensure the project meets or exceeds project goals. * More Senior engineers may provide oversight and coordination of projects, working with the assigned design managers and project managers, to meet project budgets and schedules for all mechanical discipline activities. * Manage other design partners (both internal and external) including construction partners, equipment suppliers, and other engineers and designers assigned to the project or task and review work progress and results. * Perform detailed technical bid analyses for equipment typical for biogas, bulk solids material handling, water and wastewater treatment, pump stations and pipeline conveyance, groundwater remediation, stormwater recycling, and other industrial facilities. * Generate deliverables such as PFD's, P&ID's, datasheets, and vendor shop drawings in accordance with industry codes and standards, contract requirements, and company standards. * Support the construction team including representing the design team on-site, answering RFI's, providing creative design solutions, etc. * Senior Engineers may lead projects, and develop schedules, work assignments, and staffing requirements to ensure successful project completion. * Perform early project design work such as conceptual studies, process flow diagram development, mass/energy balances, preliminary equipment sizing and selection, and general facility layout/arrangement. * Train, mentor, and advise more junior staff on proper application of industry standards and best practices. Qualifications * Bachelor's degree in mechanical engineering or equivalent engineering program from an ABET accredited four-year university. * Engineer-In-Training (EIT) certification required; Professional Engineer (P.E.) preferred or willing to obtain. * A minimum of 3 years of industry related engineering experience performing the functions as outlined above for Industrial facilities. Experience with mechanical design for data centers highly desired or experience with cooling distribution units (CDU's), Computer room handling units (CRAH), fan walls, and containment modules for air cooling for industrial facilities.. * Experience leading an engineering and design team and EPC projects for industrial facilities listed above would be required for a more senior level position * Strong organizational and time management skills. * Strong written and verbal communication skills. * Proficient in basic computing programs including the Microsoft Office suite (Word, Excel, Outlook, PowerPoint). * Preferred experience utilizing AFT Fathom or AFT Arrow hydraulic simulation software (or equivalent). #LI-JB1# Other Requirements: * Regular, reliable attendance * Work productively and meet deadlines timely * Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment * Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. * Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. Base Compensation: $100,000/yr - $104,000/yr (Actual compensation is subject to variation due to such factors as education, experience, skillset, and/or location) This posting will be active from: 01/22/2026 - 04/07/2026 We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status.

**Description** Wishing you could have an ownership stake in the company you are working for? Founded in 1898, Burns & McDonnell is an award-winning engineering, architectural, construction environmental and consulting services firm. We are a 100% employee-owned company, with regional and project offices nationwide. Burns & McDonnell plans, designs, constructs and manages projects all over the world with one mission in mind -- to make our clients successful. Burns & McDonnell has an exciting opportunity in our Transmission and Distribution Group for an Overhead Transmission Project Engineer. The successful candidate will be responsible for the following: + Providing technical leadership, direction, and support for an overhead transmission design team on projects ranging from 69kV to 500kV. + Mentoring, coaching, and developing team members. + Serving as the primary technical point of contact for the client. + Implementation of quality control processes. + Supporting proposal development. + Leading coordination and communication of project requirements and schedule needs across disciplines. + Identification and communication of technical risks associated with projects. + Oversight of production work required to meet deliverable milestones. + Identifying, developing, and communicating processes and tools to increase efficiency across team and department. + Creating, improving, facilitating and teaching training courses to the project team and department. + Other duties as assigned. The ideal candidate will be able to build and maintain strong relationships with internal and external clients as well as provide technical leadership, guidance and instruction to project teams. **Qualifications** + Bachelor's degree in engineering from accredited program. + 7 years related transmission line design experience (completion of master's degree in a related field may be substituted for one year of experience). + Professional engineering license (PE). + Ability to effectively lead project teams. Excellent written and verbal communication skills. + Strong analytical and problem-solving skills. + Experience in scheduling and budgeting. + Proficiency with PLS-CADD and PLS-POLE. + Consulting or utility experience preferred. EEO/Minorities/Females/Disabled/Veterans This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans **Job** Engineering **Primary Location** US-OH-Akron **Other Locations** US-MO-Saint Louis, US-OH-Columbus **Schedule:** Full-time **Travel:** Yes, 25 % of the Time **Req ID:** 251731 **Job Hire Type** Experienced #LI-MG #T&D

Job Level: Mid Level Home District/Group: Kiewit Industrial & Water Engineering Department: Design Engineering Market: Industrial Employment Type: Full Time If you are viewing this position on other websites, we recommend you apply to the position directly at our website at ******************* We are adding several Mid level and Senior level Mechanical Engineers to support our growing Industrial division. We are looking for experienced design engineers who know how to delivery specifications, size components and equipment develop drawings and P&IDs and related documentation for Industrial Facilities. We specialize in balance of plant design working through conceptual, through final design, into construction. If you have experience with EPC projects performing these functions, we would love to talk with you. Our projects could include the design of low and medium voltage power, balance of plant design, biogas facilities, bulk solids material handling, water and wastewater treatment facilities, mining facilities, and data centers. As we move into hyperscale data center facilities, we are looking for individuals with experience with boilers and chillers, cooling distribution units (CDU's), Computer room handling units (CRAH), fan walls, and containment modules for air cooling. We are looking for great communicators, desire to work as part of a dynamic team, and want to grow into leadership/senior positions. This is a great opportunity for you to showcase your mechanical design skills and implement innovative solutions and make a lasting impact, as Kiewit continues to expand in the Industrial marketplace. If you desire to diversify your experience, and work on different types of facilities, and want to work on EPC, large scale projects, we want to talk with you. We are an employee-owned company which fosters dedication and commitment to project success and are positioned as a key player in meeting growing electricity demands. At Kiewit, we believe in building more than just structures, we build relationships, strengthen communities and improve the world. With top notch health benefits, great time off, flexible work options a wealth-building 401K plan and unbeatable growth opportunities - we are deeply invested in the future of our employees. Your future is here. Join us at Kiewit, where we go beyond engineering and construction to build the road to success! We cultivate a culture of excellence, innovation and teamwork, making it the most rewarding place to build your career. District Overview Kiewit Engineering Group, Inc is a full-service consulting and engineering firm serving the infrastructure and engineering markets. Our combined staff of more than 3,000 engineers and design professionals have expertise that spans all major engineering disciplines to serve transportation, power, water/wastewater, mining, building, and oil, gas & chemical markets. Backed by 140 years of construction experience, our construction-driven engineering focuses on constructability and safety in the earliest phases of projects to ensure on-time and on-budget project delivery. Our rapidly growing Industrial and Water Engineering Group, which includes mechanical, process, electrical, controls, structural, architectural, geotechnical, and civil disciplines, is a multi-faceted and leading-edge division of Kiewit with best-in-class technical expertise focused on EPC and design-build delivery of industrial projects in markets such as Consumer Products, Heavy Manufacturing, Industrial Buildings, Pulp and Paper, Mineral Processing, Renewable Natural Gas, and Industrial Water and Utilities. Location This position can be based near one of our main Kiewit design locations - Colorado-Lone Tree, Kansas-Lenexa, Texas-Houston. Some consideration will be made for fully remote candidates that meet and exceed our requirements at a Senior Mechanical Engineering level. We offer relocation assistance to the district office in Lenexa Kansas. Responsibilities * Provide design, coordination, and oversight of various mechanical systems typical for biogas, bulk solids material handling, water and wastewater treatment, pump stations and pipeline conveyance, groundwater remediation, stormwater recycling, and other industrial facilities including, but not limited to, process piping, conveying systems, dust collection, general plant/facility water, compressed air, steam, and gas systems. Mechanical system design includes preparing calculations for both pressurized and gravity driven systems to size lines, material selection, and correct Code requirement application. * Perform design calculations and equipment specifications typical for biogas, bulk solids material handling, water and wastewater treatment, pump stations and pipeline conveyance, groundwater remediation, stormwater recycling, and other industrial facilities including, but not limited to, bulk solids conveyors, dust collection equipment, bins/tanks, pumps, heat exchangers, boilers, and other process equipment. * Coordinate and communicate all aspects of the project's mechanical design within multi-disciplinary teams; including the management and oversight of third party engineering, as well as coordinate vendor packages and work on vendor submittals and selection. * Review project contracts, customer Requests for Proposals (RFPs), professional service agreements, or other contractual documents and incorporate into the design as required to ensure the project meets or exceeds project goals. * More Senior engineers may provide oversight and coordination of projects, working with the assigned design managers and project managers, to meet project budgets and schedules for all mechanical discipline activities. * Manage other design partners (both internal and external) including construction partners, equipment suppliers, and other engineers and designers assigned to the project or task and review work progress and results. * Perform detailed technical bid analyses for equipment typical for biogas, bulk solids material handling, water and wastewater treatment, pump stations and pipeline conveyance, groundwater remediation, stormwater recycling, and other industrial facilities. * Generate deliverables such as PFD's, P&ID's, datasheets, and vendor shop drawings in accordance with industry codes and standards, contract requirements, and company standards. * Support the construction team including representing the design team on-site, answering RFI's, providing creative design solutions, etc. * Senior Engineers may lead projects, and develop schedules, work assignments, and staffing requirements to ensure successful project completion. * Perform early project design work such as conceptual studies, process flow diagram development, mass/energy balances, preliminary equipment sizing and selection, and general facility layout/arrangement. * Train, mentor, and advise more junior staff on proper application of industry standards and best practices. Qualifications * Bachelor's degree in mechanical engineering or equivalent engineering program from an ABET accredited four-year university. * Engineer-In-Training (EIT) certification required; Professional Engineer (P.E.) preferred or willing to obtain. * A minimum of 3 years of industry related engineering experience performing the functions as outlined above for Industrial facilities. Experience with mechanical design for data centers highly desired or experience with cooling distribution units (CDU's), Computer room handling units (CRAH), fan walls, and containment modules for air cooling for industrial facilities.. * Experience leading an engineering and design team and EPC projects for industrial facilities listed above would be required for a more senior level position * Strong organizational and time management skills. * Strong written and verbal communication skills. * Proficient in basic computing programs including the Microsoft Office suite (Word, Excel, Outlook, PowerPoint). * Preferred experience utilizing AFT Fathom or AFT Arrow hydraulic simulation software (or equivalent). #LI-JB1# Other Requirements: * Regular, reliable attendance * Work productively and meet deadlines timely * Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment * Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. * Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. Base Compensation: $100,000/yr - $104,000/yr (Actual compensation is subject to variation due to such factors as education, experience, skillset, and/or location) This posting will be active from: 01/22/2026 - 04/07/2026 We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status.

**Requisition ID:** 179455 **Job Level:** Mid Level **Home District/Group:** Kiewit Industrial & Water Engineering **Department:** Design Engineering **Market:** Industrial **Employment Type:** Full Time **_If you are viewing this position on other websites, we recommend you apply to the position directly at our website at ********************** We are adding several Mid level and Senior level Mechanical Engineers to support our growing Industrial division. We are looking for experienced design engineers who know how to delivery specifications, size components and equipment develop drawings and P&IDs and related documentation for Industrial Facilities. We specialize in balance of plant design working through conceptual, through final design, into construction. If you have experience with EPC projects performing these functions, we would love to talk with you. Our projects could include the design of low and medium voltage power, balance of plant design, biogas facilities, bulk solids material handling, water and wastewater treatment facilities, mining facilities, and data centers. As we move into hyperscale data center facilities, we are looking for individuals with experience with boilers and chillers, cooling distribution units (CDU's), Computer room handling units (CRAH), fan walls, and containment modules for air cooling. We are looking for great communicators, desire to work as part of a dynamic team, and want to grow into leadership/senior positions. This is a great opportunity for you to showcase your mechanical design skills and implement innovative solutions and make a lasting impact, as Kiewit continues to expand in the Industrial marketplace. If you desire to diversify your experience, and work on different types of facilities, and want to work on EPC, large scale projects, we want to talk with you. We are an employee-owned company which fosters dedication and commitment to project success and are positioned as a key player in meeting growing electricity demands. At Kiewit, we believe in building more than just structures, we build relationships, strengthen communities and improve the world. With top notch health benefits, great time off, flexible work options a wealth-building 401K plan and unbeatable growth opportunities - we are deeply invested in the future of our employees. Your future is here. Join us at Kiewit, where we go beyond engineering and construction to build the road to success! We cultivate a culture of excellence, innovation and teamwork, making it the most rewarding place to build your career. **District Overview** Kiewit Engineering Group, Inc is a full-service consulting and engineering firm serving the infrastructure and engineering markets. Our combined staff of more than 3,000 engineers and design professionals have expertise that spans all major engineering disciplines to serve transportation, power, water/wastewater, mining, building, and oil, gas & chemical markets. Backed by 140 years of construction experience, our construction-driven engineering focuses on constructability and safety in the earliest phases of projects to ensure on-time and on-budget project delivery. Our rapidly growing Industrial and Water Engineering Group, which includes mechanical, process, electrical, controls, structural, architectural, geotechnical, and civil disciplines, is a multi-faceted and leading-edge division of Kiewit with best-in-class technical expertise focused on EPC and design-build delivery of industrial projects in markets such as Consumer Products, Heavy Manufacturing, Industrial Buildings, Pulp and Paper, Mineral Processing, Renewable Natural Gas, and Industrial Water and Utilities. **Location** This position can be based near one of our main Kiewit design locations - Colorado-Lone Tree, Kansas-Lenexa, Texas-Houston. Some consideration will be made for fully remote candidates that meet and exceed our requirements at a Senior Mechanical Engineering level. We offer relocation assistance to the district office in Lenexa Kansas. **Responsibilities** + Provide design, coordination, and oversight of various mechanical systems typical for biogas, bulk solids material handling, water and wastewater treatment, pump stations and pipeline conveyance, groundwater remediation, stormwater recycling, and other industrial facilities including, but not limited to, process piping, conveying systems, dust collection, general plant/facility water, compressed air, steam, and gas systems. Mechanical system design includes preparing calculations for both pressurized and gravity driven systems to size lines, material selection, and correct Code requirement application. + Perform design calculations and equipment specifications typical for biogas, bulk solids material handling, water and wastewater treatment, pump stations and pipeline conveyance, groundwater remediation, stormwater recycling, and other industrial facilities including, but not limited to, bulk solids conveyors, dust collection equipment, bins/tanks, pumps, heat exchangers, boilers, and other process equipment. + Coordinate and communicate all aspects of the project's mechanical design within multi-disciplinary teams; including the management and oversight of third party engineering, as well as coordinate vendor packages and work on vendor submittals and selection. + Review project contracts, customer Requests for Proposals (RFPs), professional service agreements, or other contractual documents and incorporate into the design as required to ensure the project meets or exceeds project goals. + More Senior engineers may provide oversight and coordination of projects, working with the assigned design managers and project managers, to meet project budgets and schedules for all mechanical discipline activities. + Manage other design partners (both internal and external) including construction partners, equipment suppliers, and other engineers and designers assigned to the project or task and review work progress and results. + Perform detailed technical bid analyses for equipment typical for biogas, bulk solids material handling, water and wastewater treatment, pump stations and pipeline conveyance, groundwater remediation, stormwater recycling, and other industrial facilities. + Generate deliverables such as PFD's, P&ID's, datasheets, and vendor shop drawings in accordance with industry codes and standards, contract requirements, and company standards. + Support the construction team including representing the design team on-site, answering RFI's, providing creative design solutions, etc. + Senior Engineers may lead projects, and develop schedules, work assignments, and staffing requirements to ensure successful project completion. + Perform early project design work such as conceptual studies, process flow diagram development, mass/energy balances, preliminary equipment sizing and selection, and general facility layout/arrangement. + Train, mentor, and advise more junior staff on proper application of industry standards and best practices. **Qualifications** + Bachelor's degree in mechanical engineering or equivalent engineering program from an ABET accredited four-year university. + Engineer-In-Training (EIT) certification required; Professional Engineer (P.E.) preferred or willing to obtain. + A minimum of 3 years of industry related engineering experience performing the functions as outlined above for Industrial facilities. Experience with mechanical design for data centers highly desired or experience with cooling distribution units (CDU's), Computer room handling units (CRAH), fan walls, and containment modules for air cooling for industrial facilities.. + Experience leading an engineering and design team and EPC projects for industrial facilities listed above would be required for a more senior level position + Strong organizational and time management skills. + Strong written and verbal communication skills. + Proficient in basic computing programs including the Microsoft Office suite (Word, Excel, Outlook, PowerPoint). + Preferred experience utilizing AFT Fathom or AFT Arrow hydraulic simulation software (or equivalent). \#LI-JB1# Other Requirements: - Regular, reliable attendance - Work productively and meet deadlines timely - Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment - Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. - Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. Base Compensation: $100,000/yr - $104,000/yr (Actual compensation is subject to variation due to such factors as education, experience, skillset, and/or location) This posting will be active from: 01/22/2026 - 04/07/2026 We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status. Company: Kiewit

Burns & McDonnell is a company made up of more than 10,000 engineers, architects, construction professionals, scientists, consultants, and entrepreneurs with offices across the country and throughout the world. Project focus would be mission-critical data center projects. This opportunity hires directly into our Mission Critical team and into a multibillion-dollar industry that is growing at an exponential rate. Data Centers are an aggressive market for Burns & McDonnell and are highlighted by several priority articles on our site. Mission Critical is an international practice for Burns & McDonnell that involves exciting, collaborative work across many different departments. This position requires an experienced electrical engineer capable of successfully solving difficult problems that require adaptation and modification of standard techniques, procedures and criteria. This candidate will lead design, planning and client coordination activities associated with high, medium and low voltage electrical distribution and control systems found in mission critical, healthcare, and industrial sites. Key responsibilities: + Designs electrical systems/equipment to provide a useful and safe environment for the Mission Critical market in accordance with the clients' requirements for reliability and uptime. + Advises clients regarding electrical systems/requirements available to meet their needs and comply with all applicable codes. + Monitors installation of designed equipment/systems to ensure compliance with design documents. + Conducts fault studies and load flow analysis. Develop design criteria for protective device coordination, relay applications, medium voltage transformers, switchgear, medium and low voltage distribution. + Able to develop and/or lead the design of electrical master plans for facilities encompassing but not limited to the following: reliable power distribution, motor control centers, energy-efficient lighting systems, communications and telecom routing, instrumentation and controls for HVAC systems, fire-alarm interface, building level uninterrupted power systems (UPS) systems, engine generators. + Reviews electrical designs and specifications of equipment or systems being purchased or fabricated. + Provides electrical design direction and resource management on multi-discipline projects. + Developing concept studies, designs, and narratives. + Participate in the Identification, recruiting and management of resources to meet the needs of the business + All other duties as assigned. **Qualifications** + Bachelor of Science in Electrical Engineering or related degree from an ABET accredited program. + Or Bachelor of Science in Electrical or related Engineering Technology from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam. + Master of Science degree in Electrical Engineering a plus. + 7 years electrical engineering experience. EPC project experience preferred. + Professional Engineering License (PE) preferred. + Expert knowledge in standard engineering techniques and procedures. + Strong knowledge of electrical equipment design ANSI and IEEE Standards. Strong computer skills (e.g. Microsoft Office Suite). + Excellent written and verbal communication skills. + Experience with leading the discipline design for large projects and delegating work tasks to team members. Ability to lead execution of work and resolve issues in a team environment. + Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment. + Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills. + Ability to perform quality reviews for detailed engineering documents and specifications. + Ability to travel. This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans **Job** Electrical Engineering **Primary Location** US-OH-Columbus **Schedule:** Full-time **Travel:** Yes, 25 % of the Time **Req ID:** 251325 **Job Hire Type** Experienced #LI-EH #GFS

Job Level: Senior Level Home District/Group: Kiewit Power Delivery Department: Project Engineering Market: Power Employment Type: Full Time As an Associate Project Manager in Kiewit Power Delivery, you will support the execution of high-impact transmission and substation projects that are part of a multi-billion-dollar infrastructure portfolio. These projects are delivered using a progressive design-build model with Early Contractor Involvement (ECI), allowing our teams to influence engineering and construction outcomes from the earliest stages. You'll work alongside a dynamic team to manage materials, production, costs, and documentation while gaining exposure to all phases of project delivery. This is a unique opportunity to grow your career while contributing to transformative work in the power delivery sector. District Overview Kiewit Power Delivery is a full-service engineering and construction solutions provider, completing projects of all sizes and complexity. Across North America, our experience spans all transmission and distribution market aspects from high-voltage overhead and underground transmission to distribution design, automation design and construction capabilities. With these broad capabilities, we operate in the electric utility, renewable energy, industrial, and oil and gas markets. Location This position will be located in one of our area offices and/or on one of our project sites in Ohio, North Carolina, Oregon, Utah, Kansas or Texas. Responsibilities * Collaborate with a diverse team to estimate, schedule, and build mechanical, electrical, and heavy industrial construction projects * Support both administrative and field operations, including reviewing proposals, specifications, and drawings; performing material takeoffs; and preparing cost estimates * Attend pre-bid meetings and assist with subcontractor supervision and vendor coordination * Prepare work plans, manage quality control, track costs and materials, schedule equipment, and administer safety programs * Maintain strong client relationships and contribute to project success from planning through execution Qualifications * Bachelor's degree in Construction Management, Electrical, Mechanical, or Civil Engineering * Knowledge of construction safety and current federal/OSHA requirements * Ability to read and interpret project specifications and engineering drawings * Familiarity with project scheduling and cost control * Proficiency in Microsoft Office; experience with SurvTrak, Hard Dollar, Revit, SAP, Prolog, and/or Primavera P6 is a plus * Strong organizational and time management skills * Excellent written and verbal communication skills with attention to detail * High motivation and a strong work ethic; willingness to do what it takes to get the job done right * Ability to work independently and as part of a team * Ability to access all areas of a construction site in varying climates and environments * Active driver's license required * Willingness to travel and/or relocate as needed #LI-RF1 Other Requirements: * Regular, reliable attendance * Work productively and meet deadlines timely * Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment * Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. * Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. * FIELD ROLES ONLY May work at various different locations and conditions may vary Base Compensation: $138,000/yr - $145,000/yr (Actual compensation is subject to variation due to such factors as education, experience, skillset, and/or location) We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status.

Job Level: Mid Level Home District/Group: Kiewit Power Delivery Department: Project Engineering Market: Power Employment Type: Full Time We are looking for a Protection & Control (P&C) Engineer to support the design and engineering of greenfield and brownfield substation projects ranging from 12 kV to 500 kV. This role focuses on developing the full suite of P&C deliverables that ensure safe, reliable, and coordinated operation of high voltage substations. District Overview Kiewit Power Delivery is a full-service engineering and construction solutions provider operating across North America. Our experience and expertise span all aspects of the transmission and distribution market from high voltage overhead and underground transmission to distribution and automation design and construction capabilities. With these broad capabilities, we operate in the electric utility, renewable energy, industrial, and oil, gas markets. As part of Kiewit, we are integrated with 135 years of construction and engineering experience that provides holistic solutions, differentiating our team from the rest of the industry. Our rapidly growing power delivery business has opened new locations across North America to strengthen our market presence while executing work within the communities that we live. We have invested in industry leading design technology and platforms while also expanding our construction equipment fleet with the most advanced, and safest equipment on the market. We are committed to building upon our history as one of the safest companies to work for by equipping our craft with the best tooling and safety programs available. We are an innovative team that prides itself on continuous improvement and always delivering on our commitments to our clients and ourselves. Our staff collaborates with Kiewit's vast internal network of resources that span heavy civil and infrastructure, vertical and commercial buildings, mining, as well our oil and gas and power generation markets, to drive safe and cost-effective solutions that achieve client expectations and further Kiewit's legacy of excellence. Location This position will be located in one of our area offices and/or on one of our project sites in Ohio, North Carolina, Oregon, Utah, Kansas or Texas. Responsibilities * Develop one line and three line diagrams that define project scope, equipment configuration, and protection philosophy. * Create detailed AC and DC schematic diagrams, including control circuits, tripping schemes, metering, and auxiliary power systems. * Design and review wiring diagrams, panel layouts, and interconnection drawings for relays, RTUs, communication equipment, and station devices. * Perform P&C related engineering calculations such as CT/PT sizing, DC load calculations, breaker duty checks, and protection coordination studies. * Support development of relay settings, logic diagrams, and configuration files for microprocessor based relays. * Assist with RTU/SCADA configuration, point lists, and communication interface requirements. * Collaborate with civil, structural, and physical electrical design teams to ensure integrated and constructible substation designs. * Provide technical support during procurement, installation, testing, and commissioning. Qualifications * Bachelor's degree in Electrical Engineering or related discipline. * 5-7 years of experience with substation protection and control design for utility or EPC projects. * Familiarity with relay setting software (e.g., SEL AcSELerator, GE Enervista) and RTU/SCADA configuration tools. * Understanding of NERC, IEEE, and utility specific protection standards. * Strong attention to detail and ability to interpret complex electrical drawings. #LI-RF1 Other Requirements: * Regular, reliable attendance * Work productively and meet deadlines timely * Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment * Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. * Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. * FIELD ROLES ONLY May work at various different locations and conditions may vary Base Compensation: $138,000/yr - $145,000/yr (Actual compensation is subject to variation due to such factors as education, experience, skillset, and/or location) We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status.

Job Level: Mid Level Home District/Group: Kiewit Power Delivery Department: Project Engineering Market: Power Employment Type: Full Time We are seeking a skilled Overhead Transmission Engineer to join our Power Delivery team and support a wide range of transmission line projects across the U.S. This role focuses on the engineering and design of overhead transmission systems from 12 kV up to 500 kV, serving utilities and energy clients on both traditional engineering design and EPC style project execution. District Overview Kiewit Power Delivery. is a full-service engineering and construction solutions provider operating across North America. Our experience and expertise span all aspects of the transmission and distribution market from high voltage overhead and underground transmission to distribution and automation design and construction capabilities. With these broad capabilities, we operate in the electric utility, renewable energy, industrial, and oil & gas markets. As part of Kiewit, we are integrated with 135 years of construction and engineering experience that provides holistic solutions, differentiating our team from the rest of the industry. Our rapidly growing power delivery business has opened new locations across North America to strengthen our market presence while executing work within the communities that we live. We have invested in industry-leading design technology and platforms while also expanding our construction equipment fleet with the most advanced, and safest equipment on the market. We are committed to building upon our history as one of the safest companies to work for by equipping our craft with the best tooling and safety programs available. We are an innovative team that prides itself on excellence through continuous improvement and an unwavering commitment to deliver for our clients. Our staff collaborates with Kiewit's vast internal network of resources that span heavy civil and infrastructure, vertical and commercial buildings, mining, as well our oil and gas and power generation markets, to drive safe and cost-effective solutions that achieve client expectations and further Kiewit's legacy of excellence. Location This position will be located in one of our area offices and/or on one of our project sites in Ohio, North Carolina, Oregon, Utah, Kansas or Texas. Responsibilities * Perform detailed engineering and analysis for overhead transmission lines, including structure loading, line routing, conductor selection, insulation coordination, and hardware specification. * Develop and review design deliverables such as plan & profile drawings, structure loading trees, foundation loads, bill of materials, and construction packages. * Use industry‑standard software (e.g., PLS‑CADD, PLS‑Pole/Tower, SAG10) to model and optimize transmission line designs. * Support conceptual and feasibility studies by evaluating routing options, environmental constraints, constructability considerations, and cost impacts. * Collaborate with civil, structural, and electrical engineering teams to ensure integrated and constructible designs. * Participate in design reviews, quality checks, and risk assessments to ensure safe, reliable, and cost‑effective solutions. * Provide engineering support during procurement and construction, including responding to RFIs, reviewing vendor data, and resolving field issues. Qualifications * Bachelor's degree in electrical, Civil, or Structural Engineering. * 5-7 years of experience with overhead transmission line design (utility, EPC, or consulting environment). * Familiarity with PLS‑CADD and related transmission design tools. * Understanding NESC, ASCE, and utility‑specific design standards. * Strong problem‑solving skills and the ability to work collaboratively in a multidisciplinary environment. * Interest in supporting projects from early conceptual design through construction. #LI-RF1 Other Requirements: * Regular, reliable attendance * Work productively and meet deadlines timely * Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment * Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. * Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. * FIELD ROLES ONLY May work at various different locations and conditions may vary Base Compensation: $138,000/yr - $145,000/yr (Actual compensation is subject to variation due to such factors as education, experience, skillset, and/or location) We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status.

**Requisition ID:** 179241 **Job Level:** Mid Level **Home District/Group:** Kiewit Power Delivery **Department:** Project Engineering **Market:** Power **Employment Type:** Full Time We are seeking a skilled Overhead Transmission Engineer to join our Power Delivery team and support a wide range of transmission line projects across the U.S. This role focuses on the engineering and design of overhead transmission systems from 12 kV up to 500 kV, serving utilities and energy clients on both traditional engineering design and EPC style project execution. **District Overview** Kiewit Power Delivery. is a full-service engineering and construction solutions provider operating across North America. Our experience and expertise span all aspects of the transmission and distribution market from high voltage overhead and underground transmission to distribution and automation design and construction capabilities. With these broad capabilities, we operate in the electric utility, renewable energy, industrial, and oil & gas markets. As part of Kiewit, we are integrated with 135 years of construction and engineering experience that provides holistic solutions, differentiating our team from the rest of the industry. Our rapidly growing power delivery business has opened new locations across North America to strengthen our market presence while executing work within the communities that we live. We have invested in industry-leading design technology and platforms while also expanding our construction equipment fleet with the most advanced, and safest equipment on the market. We are committed to building upon our history as one of the safest companies to work for by equipping our craft with the best tooling and safety programs available. We are an innovative team that prides itself on excellence through continuous improvement and an unwavering commitment to deliver for our clients. Our staff collaborates with Kiewit's vast internal network of resources that span heavy civil and infrastructure, vertical and commercial buildings, mining, as well our oil and gas and power generation markets, to drive safe and cost-effective solutions that achieve client expectations and further Kiewit's legacy of excellence. **Location** This position will be located in one of our area offices and/or on one of our project sites in Ohio, North Carolina, Oregon, Utah, Kansas or Texas. **Responsibilities** - Perform detailed engineering and analysis for overhead transmission lines, including structure loading, line routing, conductor selection, insulation coordination, and hardware specification. - Develop and review design deliverables such as plan & profile drawings, structure loading trees, foundation loads, bill of materials, and construction packages. - Use industry‑standard software (e.g., PLS‑CADD, PLS‑Pole/Tower, SAG10) to model and optimize transmission line designs. - Support conceptual and feasibility studies by evaluating routing options, environmental constraints, constructability considerations, and cost impacts. - Collaborate with civil, structural, and electrical engineering teams to ensure integrated and constructible designs. - Participate in design reviews, quality checks, and risk assessments to ensure safe, reliable, and cost‑effective solutions. - Provide engineering support during procurement and construction, including responding to RFIs, reviewing vendor data, and resolving field issues. **Qualifications** - Bachelor's degree in electrical, Civil, or Structural Engineering. - 5-7 years of experience with overhead transmission line design (utility, EPC, or consulting environment). - Familiarity with PLS‑CADD and related transmission design tools. - Understanding NESC, ASCE, and utility‑specific design standards. - Strong problem‑solving skills and the ability to work collaboratively in a multidisciplinary environment. - Interest in supporting projects from early conceptual design through construction. \#LI-RF1 Other Requirements: - Regular, reliable attendance - Work productively and meet deadlines timely - Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment - Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. - Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. - **FIELD ROLES ONLY** May work at various different locations and conditions may vary Base Compensation: $138,000/yr - $145,000/yr (Actual compensation is subject to variation due to such factors as education, experience, skillset, and/or location) We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status. Company: Kiewit

**Requisition ID:** 179238 **Job Level:** Senior Level **Home District/Group:** Kiewit Power Delivery **Department:** Project Engineering **Market:** Power **Employment Type:** Full Time As an Associate Project Manager in Kiewit Power Delivery, you will support the execution of high-impact transmission and substation projects that are part of a multi-billion-dollar infrastructure portfolio. These projects are delivered using a progressive design-build model with Early Contractor Involvement (ECI), allowing our teams to influence engineering and construction outcomes from the earliest stages. You'll work alongside a dynamic team to manage materials, production, costs, and documentation while gaining exposure to all phases of project delivery. This is a unique opportunity to grow your career while contributing to transformative work in the power delivery sector. **District Overview** Kiewit Power Delivery is a full-service engineering and construction solutions provider, completing projects of all sizes and complexity. Across North America, our experience spans all transmission and distribution market aspects from high-voltage overhead and underground transmission to distribution design, automation design and construction capabilities. With these broad capabilities, we operate in the electric utility, renewable energy, industrial, and oil and gas markets. **Location** This position will be located in one of our area offices and/or on one of our project sites in Ohio, North Carolina, Oregon, Utah, Kansas or Texas. **Responsibilities** - Collaborate with a diverse team to estimate, schedule, and build mechanical, electrical, and heavy industrial construction projects - Support both administrative and field operations, including reviewing proposals, specifications, and drawings; performing material takeoffs; and preparing cost estimates - Attend pre-bid meetings and assist with subcontractor supervision and vendor coordination - Prepare work plans, manage quality control, track costs and materials, schedule equipment, and administer safety programs - Maintain strong client relationships and contribute to project success from planning through execution **Qualifications** - Bachelor's degree in Construction Management, Electrical, Mechanical, or Civil Engineering - Knowledge of construction safety and current federal/OSHA requirements - Ability to read and interpret project specifications and engineering drawings - Familiarity with project scheduling and cost control - Proficiency in Microsoft Office; experience with SurvTrak, Hard Dollar, Revit, SAP, Prolog, and/or Primavera P6 is a plus - Strong organizational and time management skills - Excellent written and verbal communication skills with attention to detail - High motivation and a strong work ethic; willingness to do what it takes to get the job done right - Ability to work independently and as part of a team - Ability to access all areas of a construction site in varying climates and environments - Active driver's license required - Willingness to travel and/or relocate as needed \#LI-RF1 Other Requirements: - Regular, reliable attendance - Work productively and meet deadlines timely - Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment - Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. - Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. - **FIELD ROLES ONLY** May work at various different locations and conditions may vary Base Compensation: $138,000/yr - $145,000/yr (Actual compensation is subject to variation due to such factors as education, experience, skillset, and/or location) We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status. Company: Kiewit

**Requisition ID:** 179240 **Job Level:** Mid Level **Home District/Group:** Kiewit Power Delivery **Department:** Project Engineering **Market:** Power **Employment Type:** Full Time We are looking for a Protection & Control (P&C) Engineer to support the design and engineering of greenfield and brownfield substation projects ranging from 12 kV to 500 kV. This role focuses on developing the full suite of P&C deliverables that ensure safe, reliable, and coordinated operation of high voltage substations. **District Overview** Kiewit Power Delivery is a full-service engineering and construction solutions provider operating across North America. Our experience and expertise span all aspects of the transmission and distribution market from high voltage overhead and underground transmission to distribution and automation design and construction capabilities. With these broad capabilities, we operate in the electric utility, renewable energy, industrial, and oil, gas markets. As part of Kiewit, we are integrated with 135 years of construction and engineering experience that provides holistic solutions, differentiating our team from the rest of the industry. Our rapidly growing power delivery business has opened new locations across North America to strengthen our market presence while executing work within the communities that we live. We have invested in industry leading design technology and platforms while also expanding our construction equipment fleet with the most advanced, and safest equipment on the market. We are committed to building upon our history as one of the safest companies to work for by equipping our craft with the best tooling and safety programs available. We are an innovative team that prides itself on continuous improvement and always delivering on our commitments to our clients and ourselves. Our staff collaborates with Kiewit's vast internal network of resources that span heavy civil and infrastructure, vertical and commercial buildings, mining, as well our oil and gas and power generation markets, to drive safe and cost-effective solutions that achieve client expectations and further Kiewit's legacy of excellence. **Location** This position will be located in one of our area offices and/or on one of our project sites in Ohio, North Carolina, Oregon, Utah, Kansas or Texas. **Responsibilities** - Develop one line and three line diagrams that define project scope, equipment configuration, and protection philosophy. - Create detailed AC and DC schematic diagrams, including control circuits, tripping schemes, metering, and auxiliary power systems. - Design and review wiring diagrams, panel layouts, and interconnection drawings for relays, RTUs, communication equipment, and station devices. - Perform P&C related engineering calculations such as CT/PT sizing, DC load calculations, breaker duty checks, and protection coordination studies. - Support development of relay settings, logic diagrams, and configuration files for microprocessor based relays. - Assist with RTU/SCADA configuration, point lists, and communication interface requirements. - Collaborate with civil, structural, and physical electrical design teams to ensure integrated and constructible substation designs. - Provide technical support during procurement, installation, testing, and commissioning. **Qualifications** - Bachelor's degree in Electrical Engineering or related discipline. - 5-7 years of experience with substation protection and control design for utility or EPC projects. - Familiarity with relay setting software (e.g., SEL AcSELerator, GE Enervista) and RTU/SCADA configuration tools. - Understanding of NERC, IEEE, and utility specific protection standards. - Strong attention to detail and ability to interpret complex electrical drawings. \#LI-RF1 Other Requirements: - Regular, reliable attendance - Work productively and meet deadlines timely - Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment - Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. - Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. - **FIELD ROLES ONLY** May work at various different locations and conditions may vary Base Compensation: $138,000/yr - $145,000/yr (Actual compensation is subject to variation due to such factors as education, experience, skillset, and/or location) We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status. Company: Kiewit

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world's most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Job Description The Opportunity Are you ready to lead the mechanical design of high-performance buildings that shape communities and critical infrastructure? AECOM's Ohio Buildings + Places team is seeking a Senior Mechanical Engineer to provide technical leadership, mentor emerging talent, and deliver complex HVAC and building systems solutions across a diverse portfolio of projects. This is a Hybrid opportunity working out of AECOM's Columbus office. This is a senior technical leadership role for an experienced engineer who thrives in both independent execution and collaborative, multi-disciplinary environments-someone who values design excellence, accountability, and developing the next generation of engineers. About AECOM At AECOM, we're delivering a better world. We believe infrastructure creates opportunity for everyone-improving how people live, work, and connect. Our clients trust us to bring together the best people, ideas, technical expertise, and digital solutions across transportation, buildings, water, environment, and energy. We are one global team-50,000 strong-united by a shared purpose: to deliver a better world through excellence, innovation, and integrity. About the Ohio Buildings + Places Team AECOM's Ohio Buildings + Places practice-anchored in Columbus and Cleveland-is one of the most established and highest-performing B+P teams in the United State. Our integrated services include architecture, interiors, building MEP systems and structural engineering, urbanism and planning, advisory services, and digital delivery. We collaborate across AECOM business lines and regions to deliver vertically integrated solutions for Public Non-Federal, Federal (DoD and Civilian), Healthcare, Science & Technology, Higher Education, Justice, Mission Critical, Logistics, and Commercial clients. Design excellence, performance, resiliency, and innovation guide our work at every scale. What You'll Do As a Senior Mechanical Engineer , you will lead mechanical system design and delivery from concept through construction administration while serving as a trusted technical resource for clients and internal teams. Technical Leadership & Design Excellence Lead the mechanical system design as a trusted technical resource for clients and internal teams while also collaborating and contributing to technical excellence within AECOM's global practice. Serve as the mechanical discipline lead on projects of varying size and complexity, ensuring technical quality, code compliance, and constructability. Apply sound engineering judgment to evaluate, select, and adapt mechanical systems, equipment, and materials. Stay current with applicable codes, standards, and emerging technologies, including ASHRAE, IMC, IPC, and IECC. Analyze system performance and energy use to optimize efficiency, resilience, and lifecycle value. Project Delivery & Coordination Execute mechanical design from concept through construction administration, including calculations, specifications, reports, and drawing development. Coordinate closely with architectural, structural, electrical, plumbing, fire protection, and specialty disciplines to ensure integrated solutions. Perform and lead site investigations to assess existing systems and inform design decisions. Review shop drawings, RFIs, and submittals; attend client and construction meetings as part of construction administration. Ensure projects are delivered within scope, schedule, and budget expectations. Team Leadership & Mentorship Mentor and guide junior engineers and designers, fostering technical growth, confidence, and professional development. Review team members' work for technical accuracy, consistency, and quality, providing constructive, growth-oriented feedback. Identify skill gaps and support the development of targeted training and knowledge-sharing initiatives. Contribute to a collaborative, inclusive team culture that values accountability, learning, and excellence. Establish yourself as a trusted technical leader and mentor within the Ohio B+P team and a subject matter expert within AECOM's overall US Practice. Proposals & Practice Support Support proposal development and pursuit efforts by contributing technical narratives, scope development, and fee input. Prepare technical reports and documentation for internal and external stakeholders. Collaborate with office leadership to advance best practices and support the long-term success of the mechanical discipline. Contribute to a collaborative, inclusive team culture that values accountability, learning, and excellence. Connect with other subject matter experts throughout the US, and contribute to the technical excellence of AECOM's global practice. Success in the Role In your first year, you will: Successfully lead multiple mechanical design efforts with clear wins in quality, coordination, and client satisfaction. Establish yourself as a trusted technical leader and mentor within the Ohio B+P team. Contribute to the delivery of high-performance, energy-efficient buildings across diverse market sectors. Strengthen consistency, clarity, and technical rigor across mechanical deliverables. Qualifications Minimum Requirements Bachelor's degree in Mechanical Engineering from an accredited program. 6+ years of relevant mechanical engineering experience or demonstrated equivalency of education and experience. Completion of the Fundamentals of Engineering (FE) exam. Professional Engineer (PE) license. Preferred Qualifications 10+ years of experience in a consulting engineering or design-build environment. Strong working knowledge of ASHRAE standards, IMC, IPC, and IECC. Experience across federal, healthcare, laboratory, mission critical, and commercial/mixed-use markets. Experience with LEED and sustainable design initiatives. Demonstrated ability to lead multiple projects concurrently. Experience delivering architecturally complex or high-profile projects. Excellent communication skills-clear, confident, and collaborative. Creative, analytical thinker with strong organizational and leadership abilities. Willingness to travel occasionally for project-related site visits. Additional Information This position is based in Columbus, Ohio (Hybrid). Sponsorship is not available for this role. Work on meaningful, technically challenging projects that make a measurable impact. Collaborate with a high-performing, multi-disciplinary team recognized for design excellence. Grow your technical leadership while mentoring the next generation of engineers. Be part of a global firm that values integrity, innovation, and professional growth. Additional Information About AECOM AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options , well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan. AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients' complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle - from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2024. Learn more at aecom.com. What makes AECOM a great place to work You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you'll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you've always envisioned. Here, you'll find a welcoming workplace built on respect, collaboration and community-where you have the freedom to grow in a world of opportunity. As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines.

**Description** Wishing you could have an ownership stake in the company you are working for? Founded in 1898, Burns & McDonnell is an award-winning engineering, architectural, construction environmental and consulting services firm. We are a 100% employee-owned company, with regional and project offices nationwide. Burns & McDonnell plans, designs, constructs and manages projects all over the world with one mission in mind -- to make our clients successful. Burns & McDonnell has an exciting opportunity in our Transmission and Distribution Group for an Overhead Transmission Project Engineer. The successful candidate will be responsible for the following: + Providing technical leadership, direction, and support for an overhead transmission design team on projects ranging from 69kV to 500kV. + Mentoring, coaching, and developing team members. + Serving as the primary technical point of contact for the client. + Implementation of quality control processes. + Supporting proposal development. + Leading coordination and communication of project requirements and schedule needs across disciplines. + Identification and communication of technical risks associated with projects. + Oversight of production work required to meet deliverable milestones. + Identifying, developing, and communicating processes and tools to increase efficiency across team and department. + Creating, improving, facilitating and teaching training courses to the project team and department. + Other duties as assigned. The ideal candidate will be able to build and maintain strong relationships with internal and external clients as well as provide technical leadership, guidance and instruction to project teams. **Qualifications** + Bachelor's degree in engineering from accredited program. + 7 years related transmission line design experience (completion of master's degree in a related field may be substituted for one year of experience). + Professional engineering license (PE). + Ability to effectively lead project teams. Excellent written and verbal communication skills. + Strong analytical and problem-solving skills. + Experience in scheduling and budgeting. + Proficiency with PLS-CADD and PLS-POLE. + Consulting or utility experience preferred. EEO/Minorities/Females/Disabled/Veterans This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans **Job** Engineering **Primary Location** US-OH-Akron **Other Locations** US-MO-Saint Louis, US-OH-Columbus **Schedule:** Full-time **Travel:** Yes, 25 % of the Time **Req ID:** 251731 **Job Hire Type** Experienced #LI-MG #T&D

Burns & McDonnell is a company comprised of more than 14,000 engineers, architects, construction professionals, scientists, consultants, and entrepreneurs with offices across the country and throughout the world. Burns & McDonnell's Mission Critical team was ranked #2 by the ENR in 2023. We have exciting opportunities for those interested in growing their careers in one of the most fast-paced, innovative sectors of high-tech building design and construction. Project focus would be mission-critical data center projects. This opportunity hires directly into our Mission Critical team and into a multibillion-dollar industry that is growing exponentially. Data Centers are an aggressive market for Burns & McDonnell and are highlighted by several priority articles on our site. Mission Critical is an international practice for Burns & McDonnell involving exciting, collaborative work across many departments. The Senior Plumbing Engineer will lead plumbing design project teams to create world class designs for new projects, alterations and redevelopments on a variety of projects including power, process, corporate, healthcare, pipeline, airports, institutional, industrial, manufacturing, government and military facilities. The Senior Plumbing Engineer will lead the project team throughout the design and construction process, adapting plumbing plans according to budget constraints, design factors or client needs What you will do + Lead plumbing engineering of projects from the conceptual phase through design completion providing a turnkey efficient process. + Ability to meet project needs and requirements set forth by our client and the project management team + Prepare plumbing equipment: packaged equipment specifications and data sheets, Request for Qualifications (RFQ's), technical bid summaries, and purchase recommendations. + Review plumbing equipment vendor drawings; data interface with suppliers, clients other engineering disciplines, detailers, designers. + Participate in development of project schedule, scope, budget staffing planning and construction planning. Responsible for effective management of change orders. + Apply expert knowledge of industry standard plumbing practices, principle, codes and procedures within the MEP AE services industry. + Apply knowledge and experience to complex projects, find non-standard design solutions. + Quality review production drawings for a variety of projects and project related data as required by the project managers to verify corrections are made within multiple CAD related software. These tasks include but are not limited to performing a QA/QC on all plumbing system production drawings, scheduled equipment and specifications. + Quality review the construction administration including coordination with field personnel to resolve design related installation issues, calculations, field inspections and testing of plumbing systems. + Leads field inspections, installation, measurements or calculations for public and private clients. + Prepare and present technical reports for clients and industry publications. + Build effective relationships with existing clients, customers and contractors and develop new business opportunities. Responsible for ensuring customer satisfaction goals and expectations are met. + Participate in sales and marketing efforts to identify key pursuits. + Lead the development of cost proposals and qualification statements to achieve stated targets and standards for financial performance. + Prepare and present project budgets and cost estimates. Report project performance. + Provide leadership, guidance and instruction to the plumbing engineering practice. Mentor plumbing staff team members while advocating their professional development and growth. This includes stateside and international team members. + Use experienced relationships with local vendors and contractors to put together and schedule lunch and learn opportunities for all team members. + Responsible for QA/QC process adherence and documentation. + Responsible for effective communication with other engineering disciplines. + Responsible for compliance with company and site safety policies. **Qualifications** + Bachelor Degree in Mechanical Engineering or related degree from an ABET accredited program. 7 years plumbing engineering experience. Required or + Bachelor Degree in Mechanical or related Engineering Technology from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam. 7 years plumbing engineering experience. Required o + Master Degree in Mechanical Engineering and 6 years mechanical engineering experience. Required + EPC project experience preferred. + Expert knowledge in standard engineering techniques and procedures. Strong knowledge of plumbing equipment design codes (ASPE, IPC, UPC). Strong computer skills (e.g. Microsoft Office Suite). + Excellent written and verbal communication skills. + Experience with leading the discipline design for large projects and delegating work tasks to team members. Ability to lead execution of work and resolve issues in a team environment. + Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment. + Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills. + Ability to perform quality reviews for detailed engineering documents and specifications. + Flexible schedule to travel locally and across the country. + Professional Engineer (PE) License Preferred. + Certified in Plumbing Design (CPD) certification preferred. This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans **Job** Mechanical Engineering **Primary Location** US-OH-Columbus **Schedule:** Full-time **Travel:** Yes, 15 % of the Time **Req ID:** 251363 **Job Hire Type** Experienced #LI-EH #GFS

** **Work with Us. Change the World.** At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world's most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. **Job Description** **AECOM** is actively seeking a **Lead Mechanical Engineer** for employment in the **Cleveland, Ohio** office. The Lead Mechanical Engineer will be responsible for working on various designs of high-performance buildings across multiple sectors, including Corporate Workplace and Commercial buildings, Federal Civilian and DoD, Healthcare, Mission Critical, Justice, Logistics, and Higher Education projects. The Lead Mechanical Engineer should be able to work independently and meet design requirements for both small and large projects. The ideal candidate will take the discipline lead on projects involving new facilities, as well as the renovation, modernization, and repurposing of existing buildings. They should have excellent organizational skills, demonstrate critical thinking, quickly identify issues, and contribute to finding solutions. US West **Buildings + Places** has a vast market spread and geography, providing opportunities across a wide range of project typologies, including Science & Technology, Advanced Manufacturing, Commercial, Aerospace, Higher Education, Industrial and Process, Transportation, Aviation, Sports and Federal market sectors across the western United States and beyond. As a dynamic team of Architects, Planners, and Engineers we strive to incorporate beauty, sustainability, resiliency, equity, and innovation in our projects. **The responsibilities for this position include, but are not limited to:** + Be proficient in all aspects of mechanical system design, including HVAC and plumbing for projects of all sizes, leading junior engineers in engineering design development and professional growth. + Assist in proposal preparation in conjunction with the senior leadership of the office, write reports for internal and external purposes based on findings, and work cooperatively with managers and other employees to achieve the company's mission. + Ensure discipline plans meet overall project team requirements for project scope and schedule, staying current on codes and technologies relevant to the mechanical discipline. + Handle engineering design (HVAC & plumbing) from concept through construction administration, conducting research, developing, designing, and specifying mechanical systems, equipment, components, and materials, applying principles and techniques of mechanical engineering. + Organize and conduct site visits to collect data and evaluate mechanical systems, equipment, components, and materials for projects. + Complete assigned engineering and design tasks in accordance with client-specified criteria and applicable codes and standards, review junior team members' work for quality and training requirements. + Coordinate with multiple disciplines and act as the lead mechanical engineer to ensure projects are delivered within budget and on schedule, while managing the mechanical team, including HVAC and plumbing. + Ensure conformance with standards, established design practices, applicable codes, and technical adequacy of design and construction. + Review and approve shop drawings and attend client meetings during the construction administration phase. + Mentor and guide junior engineering staff, fostering professional growth and skill development. + Evaluate team members' technical abilities and provide constructive feedback to address skill gaps. + Develop tailored training plans and encourage knowledge-sharing to enhance overall team competency. **Qualifications** **Minimum Requirements:** + Bachelor's degree in mechanical engineering from an accredited program. + BS + 6 years of relevant experience or demonstrated equivalency of experience and/or education. + PE license **Preferred** : + 12+ years of mechanical engineering experience within a consulting or design-build firm. + Knowledge and experience with ASHRAE standards, IPC, IMC, and IECC codes. + Proficient in all conventional aspects of mechanical engineering and conducts work requiring judgment in the independent evaluation, selection and substantial adaptation and modification of standard mechanical engineering techniques, procedures, and criteria. + Experience in the following markets: federal, healthcare, laboratory, and corporate commercial/mixed use. + Experience with LEED and sustainable design projects. + Documented experience in aesthetically challenging designs with high profile architecture firms. + Analyze equipment energy use for optimizing systems. + Ability to work on and lead multiple projects concurrently. + Excellent communication skills: articulate, assertive, and confident. + Creative thinker with effective teamwork skills. + Project-related travel may occasionally be required for this position. **Additional Information** + Sponsorship for US Employment Authorization is not available now or in the future for this position. Offered rate of compensation will be based on individual education, qualifications, experience, and work location. The range for this position is $120000 to $140000. **About AECOM** AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options, well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan. AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients' complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle - from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2024. Learn more at aecom.com. **What makes AECOM a great place to work** You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you'll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you've always envisioned. Here, you'll find a welcoming workplace built on respect, collaboration and community-where you have the freedom to grow in a world of opportunity. As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines. **ReqID:** J10137907 **Business Line:** B&P - Buildings & Places **Business Group:** DCS **Strategic Business Unit:** West **Career Area:** Engineering **Work Location Model:** Hybrid **Compensation:** USD 120000 - USD 140000 - yearly

Title: Project Engineer Under general supervision, solves complex problems requiring detailed knowledge of field and industry best practices in engineering and project management. Uses experience and problem-solving skills to develop and improve processes. Displays core competencies by analyzing possible solutions using standard procedures. Performs assignments requiring experience and knowledge of standard concepts within engineering and design. This position is located at a client site in Dayton, OH. Work will be performed on site, with schedule flexibility for remote work opportunities. Responsibilities Responsible for technical leadership of a project, typically up to $500K, within the programmatic guidelines set by the program manager and customer. Defines, generates, and reviews project requirements documentation. Performs technical studies to refine project requirements. Monitors project to ensure work scope, schedule, and budget are well defined and maintained. Provides the coordination between resource managers/supervisors and ensures all necessary reviews and approvals are received. May conduct performance/project analyses during phase-down to benefit future/other projects/missions/programs. Incumbents have experience as engineers before moving into this project role Performs routine assignments in the entry level to a professional job progression. Develops competence by performing structured work assignments. Uses existing procedures to solve routine or standard problems. Receives instruction, guidance and direction from others. Requires conceptual knowledge of theories, practices and procedures within a discipline. Applies general knowledge of industry developed through education or past experience. No mentoring or advisory responsibilities; accountable for developing own technical contribution. Uses existing procedures to solve standard problems; analyzes information and standard practices to make judgments. Requirements/Qualifications Bachelor's Degree in Engineering required; Mechanical, Chemical or Electrical Engineering discipline preferred 2-5 years project engineering experience required. Small project cost control and support preferred. Must be proficient in Excel and other Microsoft office products Strong business and analytical acumen. Advanced interpersonal and communication skills to achieve results in interdisciplinary environment. Physical Qualifications Work is located at a working client site: Requires exposure to ambient temperature extremes Extensive walking in and around a construction site, climbing ladders, climbing scaffolding, working on elevated platforms, working on uneven surfaces and working in small or confined spaces. Some lifting may be required, up to 20lbs Must have the ability to walk into and out of the project (enter/egress). Must be able to use appropriate standard issued Personal Protection Equipment (PPE) required for each assigned task (i.e. harness, life vest, lift buckets, hearing and eye protection, steel-toed boots, etc.) Day-to-day physical requirements involve standard office activities including sitting/standing for extended periods of time, attending meetings, use of keyboard and mouse repetitively BENEFITS KBR offers a selection of competitive lifestyle benefits, which could include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development. Belong, Connect and Grow at KBR At KBR, we are passionate about our people and our Zero Harm culture. These inform all that we do and are at the heart of our commitment to, and ongoing journey toward being a People First company. That commitment is central to our team of team's philosophy and fosters an environment where everyone can Belong, Connect and Grow. We Deliver - Together. KBR is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.