Forklift driver jobs in Syracuse, NY

Company DescriptionJobs for Humanity is partnering with Aldi to build an inclusive and just employment ecosystem. Therefore, we prioritize individuals coming from the following communities: Refugee, Neurodivergent, Single Parent, Blind or Low Vision, Deaf or Hard of Hearing, Black, Hispanic, Asian, Military Veterans, the Elderly, the LGBTQ, and Justice Impacted individuals. This position is open to candidates who reside in and have the legal right to work in the country where the job is located. Company Name: Aldi Job Description Position Type: Full-Time Average Hours: 30-35 hours per week Starting Wage: $25.00 per hour Duties and Responsibilities: Must be able to perform duties with or without reasonable accommodation. • Selects and receives incoming stock efficiently to effectively fulfill orders received from stores. • Relocates merchandise throughout the warehouse according to product handling guidelines. • Sorts, organizes and loads merchandise strategically in preparation for shipment and unloads incoming shipment from trucks/ back-hauls. • Performs general cleaning duties to achieve warehouse appearance standards and safety requirements. • Participates in-taking warehouse inventory counts according to guidelines. • Cooperates and interacts effectively with peers, suppliers and warehouse leadership through ongoing communication and exchange of information. • Provides input to the warehouse management regarding changes to improve processes. • Inspects product, consults with the warehouse management regarding product quality, safety concerns and sanitation issues. • Acts and decides independently within the delegated area of responsibility. • Assists warehouse management in achieving budgeted goals. • Performs all assigned tasks, accurately, efficiently, and within company policy and procedures. • Follows the ergonomic program according to established procedures. • Operates equipment according to safety guidelines in performance of essential job functions. • Notifies management regarding product quality, safety concerns, and sanitation issues. • Other duties as assigned. Job Qualifications: ALDI Acts Competencies: Perform within ALDI Acts competencies as outlined below. • You must be 18 years of age or older to be employed for this role at ALDI • Acts Conscientiously: Demonstrates concern for quality, product integrity, and safety of one's own and others' work and impact to the stores. • Collaborates and Cooperates with Team: Commits to and supports a collaborative working environment with peers and supervisors. • Demonstrates a Positive Attitude and Resilience: Adapts positively to pressure, setbacks, challenges and change in order to achieve and sustain peak effectiveness. • Drives for Success: Delivers excellent performance by seizing opportunities and proactively taking concrete actions that adhere to ALDI policies and procedures. Goes the extra mile and persistently overcomes obstacles to improve results. • Organizes and Executes with Efficiency: Makes decisions, stays organized and maintains compliance with ALDI standards to support overall productivity and speed in the warehouse both for him/herself as well as the broader team. Job-specific Competencies: Knowledge/Skills/Abilities • Ability to interpret and apply company policies and procedures. • Excellent verbal and written communication skills. • Skill of performing basic arithmetic equations such as addition, subtraction, multiplication and division. • Gives attention to detail and follows instructions. • Ability to work both independently and within a team environment. Education and Experience: • High School Diploma or equivalent preferred. Physical Requirements: • Frequently required to lift and place product weighing up to 45 pounds on pallets at various heights. • Frequently move merchandise from warehouse stock and prepare product for store deliveries. • Frequently required to sit, stand, bend, reach, grip, push, pull, lift, carry and walk throughout the warehouse. • Continuously work in varying temperatures, hot and cold (including outdoor temperatures and refrigerator/freezer environments). • Ability to safely and properly operate powered industrial equipment. ALDI offers competitive wages and benefits, including: 401(k) Plan Company 401(k) Matching Contributions Employee Assistance Program (EAP) PerkSpot National Discount Program In addition, eligible employees are offered: Medical, Prescription, Dental & Vision Insurance Generous Vacation Time & 7 Paid Holidays Up to 6 Weeks Paid Parental Leave at 100% of pay Up to 2 Weeks Paid Caregiver Leave at 100% of pay Short and Long-Term Disability Insurance Life, Dependent Life and AD&D Insurance Voluntary Term Life Insurance Click here to learn more about the benefits ALDI has to offer ALDI is committed to equal opportunity for all employees and applicants. As a proud Equal Opportunity Employer (EOE), we do not discriminate based on race, color, national origin, ancestry, citizenship status, religion, sex, sexual stereotyping, sexual orientation, gender, gender identity, gender expression, age, marital status, mental or physical disability, medical condition, genetic information, military or veteran status, pregnancy (which includes pregnancy, childbirth, and medical conditions related to pregnancy, childbirth, or breastfeeding), or any other protected characteristic. Employment may be contingent upon ALDI's receipt of an acceptable and job-related drug test, motor vehicle report, and/or reference check, as applicable and permissible by law.

This position will be responsible for, among other things, stages, shrink wraps and loads products by trip number and store number as it is received from the packing and pulling areas of the stockroom. Prepares palletized loads for shipment by shrink-wrapping product to ensure safe transportation or storage, including safe and proper balancing and placement of products. Additionally, this position assists with safe and proper pallet building and selects products for specific routes. Responsibilities: Stages product on pallets, shrink wraps to prevent loss, and loads pallets on trucks Inspects trailers for suitability before loading Ensures correct parts are placed on the correct truck - packs the right parts for delivery to the right customers with accuracy and speed, maps out the organization of loading customer orders from skids to trucks Operates pallet jack or forklift as needed Maintains the integrity of products through proper handling and storage Keeps work area clean to avoid potential accidents and to allow for rapid loading Pulls stock orders until time to load trucks as needed Assists with processing other DC shuttles Works in a safe manner following all safety procedures, rules and regulations Performs all other duties as assigned by management Experience, Education, and Abilities: High School Diploma or 6 months of equivalent work experience required Forklift certified preferred Regular, reliable, predictable attendance Able to speak clearly and listen attentively Capable of recognizing and distinguishing letters and numbers (both visually and aurally) and remembering their sequence Should have basic computer APGJCe skills Capable of lifting and moving merchandise of up to 60 lbs. Able to push/pull up to 300 lbs. using mechanical aids, such as hand trucks, barrel dollies, hydraulic lifts, etc. Able to bend or stoop to floor-level shelves and be able to reach shelves (eight feet) with use of stool or ladder when necessary Must be able to get in and out of the back of truck with parts while using a ramp when necessary Able to stand and walk for entire work shift Work Environment: While performing the duties of this position, the employee is occasionally exposed to moving mechanical parts, hazardous materials, outside weather conditions of extreme heat and cold. The noise level in the work environment is usually moderate. This position offers an hourly rate of $21.50. Many of our hourly positions have pay progression with set starting rates and you reach the top end of this range within 12 months of hire. For other positions, the starting rate will be determined based on individual skills, experience, and qualifications. We value the unique contributions of each team member and encourage candidates to discuss their backgrounds during the interview process. Benefits: Health Insurance: Comprehensive medical, dental, and vision plans. Retirement Plan: 401(k) with company match. Paid Time Off: Vacation, personal days, holidays, sick days, and paternal leave Additional Perks: Employee stock purchase plan, tuition reimbursement, professional development opportunities, and wellness programs. Not the right fit? Let us know you're interested in a future opportunity by joining our Talent Community on jobs.genpt.com or create an account to set up email alerts as new job postings become available that meet your interest! GPC conducts its business without regard to sex, race, creed, color, religion, marital status, national origin, citizenship status, age, pregnancy, sexual orientation, gender identity or expression, genetic information, disability, military status, status as a veteran, or any other protected characteristic. GPC's policy is to recruit, hire, train, promote, assign, transfer and terminate employees based on their own ability, achievement, experience and conduct and other legitimate business reasons.

United Auto Supply is a distributor of over 100 different manufacturers of automotive supplies. We are currently seeking motivated employees who take pride in their job and do it correctly. We have a state of the art computer systems. All parts are tracked with barcode scanners; ensuring accuracy and designating tasks so there is minimal downtime throughout the day. This enables us to guarantee steady workflow to full time employees. We are looking for responsible Cherry Picker operators to move packages and material around our facilities. Candidate must safely and efficiently operate the cherry picker machine in order to safely move/ relocate materials within the warehouse. Employee is responsible for picking our replenishment stock for our several other store locations. Also putting away stock that has been received into the warehouse. The Cherry Picker operator is responsible for picking and storing all product safely and accurately within warehouse. Day Shift 6:00am-4:30pm Duties and Responsibilities: Receive, store, pick, and stage product as required Follow directions from lead and management team on daily requirements Operate manually, or Powered equipment as needed, and as qualifications permit Use RF guns, Computers and other equipment as directed and trained Maintain facilities and work areas in a safe and clean manner Earn up to $80 per week bonus on top of your weekly pay. Strong Productivity skills to meet daily quotas as directed by floor management.

Under the Supervision of the Warehouse Manager, and as a member of the operations team, you will operate industrial cutting equipment (saws and/or lathe) to cut metal materials as requested and perform miscellaneous duties as assigned. Receive incoming inventory and package products for shipment to ensure error-free packaging, efficient loading, unloading, and departure of trucks, and accurate product inventory. Verify and keep records on incoming and outgoing inventory. This position is classified as a Safety Sensitive Position due to the work environment and equipment trained and used by staff. Regular Shift 9am-6:30pm Monday through Thursday. Friday 6am-2:30pm. Initial training on Day shift Monday through Friday. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES Operate industrial cutting equipment (saw and/or lathe) to cut materials as requested and perform miscellaneous duties as assigned Unload incoming trucks and move products to proper staging areas using a forklift, pallet jack or crane. Receive incoming materials and compare information on packing slip with purchase orders, invoices, or other documents to verify accuracy of shipment. Prepare orders for shipment by retrieving inventory and packaging appropriately for damage free delivery. Use of company. Maintain a neat and clean work area by sweeping floors, disposing of cardboard, banding, or packing materials, and removing debris. Perform related duties as requested to meet department and or business objectives. After training, use equipment to accurately measure materials, color code, catalog, log inventory, and put product away. With training may operate industrial cutting equipment to cut materials as requested and perform miscellaneous duties as assigned After training, and as necessary, move delivery trucks within the yard and/or operate a NonCDL F450 truck for delivery, to meet production needs. After training, implement facility closure tasks at end of identified shift. Regular and reliable on-site attendance is a requirement of employment. Requirements QUALIFICATION STANDARDS High School Diploma or High School Equivalent strongly preferred. Mathematical ability to sort, check, count, measure, and verify numbers and or product shipped or received. Demonstrated computer skills in the use of company ERP System as required. Ability to operate material handling equipment after training. Ability to read and write. Good communication skills. Ability to prepare routine administrative paperwork, perform math calculations and perform computer data entry. Valid NY State Class B driver's license and/or CDL endorsement a plus, for back-up driving. SUPERVISORY RESPONSIBILITIES This position does not have any supervisory responsibilities. ACCOUNTABILITIES Contribute to the overall success of the company by performing all assigned duties in a professional, timely and accurate manner. Follow all Company safety policies and procedures as set forth in the Employee Handbook, Safety Policies, and any local/regional/state/national regulations. EQUIPMENT, MACHINES AND SOFTWARE USED: Ability to operate industrial fork trucks/lifts, overhead crane, back saw, and computer to send/receive email messages, post information to a database, and perform basic email and/or data entry in ERP System. Accurately read calipers and measuring instruments determine inventory amounts and customer requirements. With training ability to cutting machinery (saw and/or lathe). Must wear appropriate personal protective equipment including safety shoes, gloves, and safety glasses when performing certain job duties. Eligible staff with NYS CDL or Class B license and training may drive company commercial vehicles. MENTAL AND VISUAL REQUIREMENTS Moderate mental and visual attention required for performing manual work, machine operations, setups, inspections, and adjustments that require frequent decisions to detect and adjust for variance from proper operation. May be required to operate equipment in congested areas involving considerable variety of movement. PHYSICAL ACTIVITIES AND REQUIREMENTS Ability with or without reasonable accommodation perform the physical requirements of the job which include but are not limited to walk, climb, stoop, kneel, crouch, bend, talk, hear, and perform repetitive motion of hands and/or wrists to finger, grasp, handle, feel, push, pull, reach. Visual acuity to perform inspection of materials, reading of caliper and other measuring devices and operating motorized material handling equipment. Ability to exert more than 20 pounds of force constantly, and/or more than 50 pounds of force frequently, and/or 100 pounds of force occasionally to move objects. ENVIRONMENTAL CONDITIONS Work involves minimal exposure to unusual elements, such as temperature changes, outdoor exposure to weather conditions, fumes, odors, gases, mists, and/or smoke, oils and/or lubricating fluids. (SDS sheets on file and available for review). Work environment involves exposure to physical risks, such as operating dangerous equipment and proximity to moving mechanical parts. COMPENSATION The hourly range is government set minimum wage up to $25.00/hour plus discretionary incentive. EMPLOYER'S DISCLAIMER All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor. Furthermore, the company reserves the right to add to or revise an employee's job duties at any time at its sole discretion. This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship. Salary Description state minimum up to $25.00 dollars per hour

**Basic Qualifications:** + High School Diploma or GED equivalency. + 1 year Material Handling experience + Ability and willingness to complete hazardous material handling training. + Ability and willingness to use basic hand tools and measuring devices (rulers, tape measures, etc.) + Ability and willingness to use basic computer applications. + Ability and willingness to perform basic mathematical calculations (addition, subtraction, etc.) and metric conversions (i.e. scale conversions). + Ability and willingness to perform intermediate Oracle transactions. + Basic understanding of process instructions. + **Must be able to work Tuesday-Saturday 7am-3:30pm** **Essential Functions & Responsibilities:** + Perform intermediate oracle transactions and associated order paperwork. + Possess specific knowledge in one or more of the following material handler functions: receiving, shipping, stock room, and expendable items. + Pick parts according to work order instructions for delivery to manufacturing. - Perform cycle counts and associated transactions. + Apply pack slip instructions when packing packaging parts. + Upload and receive incoming deliveries. + Working knowledge of FedEx, UPS systems, and other shipping systems. + Special handling of parts with cure date / shelf life. + Complete accurate scale counts. + Create, print, and pull parts from finished goods stock room. + Print invoices for external customers. + Perform inventory transactions and process scrap tickets. + Perform stocking transactions into stock room and finished goods as required. + Research & correct inventory variances. + Track shipping supply inventory (i.e. - boxes, bags, packing material, etc.). + Obtain certification to ship hazardous chemicals. + Perform final packaging. + Coordinate with freight carriers to schedule pickups via phone or internet. + Operate forklift, pallet jack, tank carts, etc. + Possess forklift certification as required. + Possess valid driver's license in order to pick up and deliver items. Must pass online training prior to driving. + Must be comfortable multi-tasking and working within deadlines. + Receive guidance from higher level employees. + Cross train other employees as needed based upon knowledge and experience. Compliantly complete all written and / or electronic labor tracking documentation. + Keep all shift operators informed of special problems involving operation or set up. + Communicate with team to ensure all team members are aware of new processes and/or issues. + Frequent interaction with internal and / or external customers and support functions (i.e. planners, engineers, sourcing department, fulfillment, managers) outside of home department. May act as primary contact for auditors. + Work extended and flexible hours as needed to support business needs including working weekends and / or extended shifts. + Report problems to appropriate resource and/or Coach. + Proactively work to improve efficiency and quality of products. + Participate in and support team initiatives. + Utilize proper PPE, safety equipment, and follow safety procedures. + Understand and abides by the GE Leadership behaviors. + Other duties as be required. **Desired Qualifications:** + Flexibility in schedule to work overtime as required. + Possess knowledge of Microsoft applications (Word, Excel Power Point, etc.) + Prior experience operating forklift. + Previous experience in a self-directed team environment. + 1-3 years material handling experience. - Extreme attention to detail. + Demonstrated ability to work effectively in a team environment. + Humble: respectful, receptive, agile, eager to learn. + Transparent: shares critical information, speaks with candor, contributes constructively + Focused: quick learner, strategically prioritizes work, committed + Leadership ability: strong communicator, decision-maker, collaborative. + Problem-solver: analytical-minded, challenges existing processes, critical thinker + Familiarity with 5S & lean manufacturing knowledge. + **Must be able to work Tuesday-Saturday 7am-3:30pm** **Physical Requirements:** + Ability to continuously lift 1-10 lbs., frequently lift 11-22 lbs., and occasionally lift 23-50 lbs. + Ability to stand and walk continuously, as well as frequent bending, stooping, and crouching. *All job descriptions are subject to change. The pay for this position is $20/hr. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on 1/31/26. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling, and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation for purposes of participating in the application/hiring process with GE. If you are unable or limited in your ability to apply or interview as a result of your disability, you can request reasonable accommodations by emailing us at accommodation.mailbox@ge.com . Any offer of employment is conditioned upon the successful completion of a background check and drug screen (as applicable). _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

As employees of a farmer-owned cooperative, we come to work every day trying to honor the tireless effort and care these farming families put in every day, all day, 365 days a year. Our farmer-owners tend to think in generations, with some of our farms being run by the same families for over a century. We carry this approach into our business, knowing that each and every one of us makes a difference in allowing these generational traditions to continue, taking pride in knowing that we nourish our friends, neighbors, nation, and even the world with healthy and delicious dairy products. Our products include milk, flavored milk, yogurt, dip, sour cream, cottage cheese, and ice cream mix marketed under the Upstate Farms , Bison , Milk for Life , and Intense Milk brands. We have an opening Warehouse Operators. Responsible for operating material handling equipment to move finished product to and from warehouse and trucks. Equipment may include, but not limited to, power lifting equipment and scan guns. Responsible for performing all required operating procedures. Essential Duties and Responsibilities: Required to perform some or all of the following: load, unload, and pick orders while maintaining accuracy of inventory records. Must follow all SOP procedures and complete required documentation/checklists. Participate in continuous improvement efforts to improve products, services, or processes. Maintains area cleanliness, reports leaking or out of spec product and participate in waste reduction efforts. Follow all Safety requirements to include, Housekeeping, Lock Out/Tag Out, PPE and engage in facility safety efforts. Ensure compliance with all OSHA, NYSDA, PMO, FDA, and assist in maintaining SQF readiness, and HACCP. Education and Experience: High School Diploma or equivalent required 0-2 years manufacturing and/or warehouse experience Must be able to operate forklifts, pallet jacks (manual/electric) Must be able to work in varied temperature ranges Must be a minimum of 18 years of age. Expectations: Performs reasonable job related as requested. Meets departmental productivity standards. Actively participates in Continuous Improvement efforts. Adheres to Company Policy and Procedures. Ability to meet qualification card training plans. Perform all job duties in a safe and compliant manner. Operate in varied temperature ranges. Ability to be flexible within the work area to operate various production equipment. Engages in open communication with a growth mindset, maintaining a positive and respectful attitude. Pay: $18-20/hr.* *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position's qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description As employees of a farmer-owned cooperative, we come to work every day trying to honor the tireless effort and care these farming families put in every day, all day, 365 days a year. Our farmer-owners tend to think in generations, with some of our farms being run by the same families for over a century. We carry this approach into our business, knowing that each and every one of us makes a difference in allowing these generational traditions to continue, taking pride in knowing that we nourish our friends, neighbors, nation, and even the world with healthy and delicious dairy products. Our products include milk, flavored milk, yogurt, dip, sour cream, cottage cheese, and ice cream mix marketed under the Upstate Farms , Bison , Milk for Life , and Intense Milk brands. We have an opening Warehouse Operators. Responsible for operating material handling equipment to move finished product to and from warehouse and trucks. Equipment may include, but not limited to, power lifting equipment and scan guns. Responsible for performing all required operating procedures. Essential Duties and Responsibilities: Required to perform some or all of the following: load, unload, and pick orders while maintaining accuracy of inventory records. Must follow all SOP procedures and complete required documentation/checklists. Participate in continuous improvement efforts to improve products, services, or processes. Maintains area cleanliness, reports leaking or out of spec product and participate in waste reduction efforts. Follow all Safety requirements to include, Housekeeping, Lock Out/Tag Out, PPE and engage in facility safety efforts. Ensure compliance with all OSHA, NYSDA, PMO, FDA, and assist in maintaining SQF readiness, and HACCP. Education and Experience: High School Diploma or equivalent required 0-2 years manufacturing and/or warehouse experience Must be able to operate forklifts, pallet jacks (manual/electric) Must be able to work in varied temperature ranges Must be a minimum of 18 years of age. Expectations: Performs reasonable job related as requested. Meets departmental productivity standards. Actively participates in Continuous Improvement efforts. Adheres to Company Policy and Procedures. Ability to meet qualification card training plans. Perform all job duties in a safe and compliant manner. Operate in varied temperature ranges. Ability to be flexible within the work area to operate various production equipment. Engages in open communication with a growth mindset, maintaining a positive and respectful attitude. Pay: $18-20/hr.* *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position's qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Forklift Drivers are an essential part of BCI's on time customer delivery guarantee. Forklift Drivers are responsible for loading, unloading, stacking and staging corrugated products and materials in a safe and timely fashion. Work Schedule: Monday- Friday 5:00AM-1:30PM Pay Rate: $20.00-$23.00 Duties: Follow established safety policies and procedures at all times Maintain a current Lift Truck Operator License and operate it in a safe manner Complete and document a forklift inspection form before start of shift and when operating a new forklift Complete maintenance work orders to supervision for needed repairs Receive trailer loads of corrugated and scan into inventory using hand-held scanners Locate stock before the start of the run using Amtech computer software Deliver appropriate stock to appropriate machines safely and on time Remove finished goods from machines Maintain neat, orderly and safe stacks of stock in storage areas Read a tape measure with accuracy and calculate figures and amounts, such as percentages and measurements Read and follow instructions on factory masters Complete necessary paperwork in an accurate and timely manner Maintain accurate location of stock in storage area by paperwork and Amtech computer software Load trailers with finished product according to shipment plans Accurately bill out product being shipped using Amtech Software Hand stretch wrap units and band units to a pallet by using a hand-bander Assist other forklift operators as necessary Comply with all company policies and procedures, including safety and maintaining good housekeeping Additional duties may be assigned by management Full-time role in a manufacturing plant/warehouse setting Skill Set: Working knowledge of equipment design and capabilities that can be translated into efficient operations Problem-solving involving one or more concrete variables in standardized situations Working knowledge of product layouts, specifications and quality standards Excellent written, verbal and graphic instructions skills Computer and typing skills Understanding of basic math Qualifications Desired: Prior work experience in the corrugated packaging industry Experience as a forklift operator High school diploma or equivalent Physical Demands: The physical demands described below are representative of those that must be met in order to successfully perform the essential functions of this position:• Stand, walk and communicate with others (both speaking and listening) - regularly• Use hands to adjust, manipulate and feel product - frequently• Reach with hands and arms - frequently• Stoop, kneel, crouch or crawl - frequently• Sit - occasionally• Lift and/or move up to 50 pounds - regularly• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus About BCIBuckeye Corrugated, Inc. (BCI) is a privately held, employee-owned company with twelve (12) corrugated manufacturing facilities, providing an extensive range of corrugated packaging products. Located in ten states, our services and capabilities include custom-designed corrugated packaging, point-of-purchase displays, point-of-sale packaging along with fulfillment and logistics. Simply stated, we do not just make boxes. We build the means to shape impressions and influence perceptions. BCI provides competitive pay and a robust benefits package including but not limited to: medical, dental, vision and life insurance, disability benefits, 401(k), paid time off and holidays, as well as a bonus plan and opportunity for employee stock ownership.

The Forklift Operator operates and manages the movement of materials to ensure a clean, organized facility, respects forklift safety criteria, and fulfills production needs. Pay range is $17.50 - $19.00 / hr Key Responsibilities Completes daily maintenance checks of the assigned unit before operation to ensure safe operation of the equipment and that no repairs are needed. Notifies technician in advance when aware that equipment will need maintenance. Operates forklift while in a fast-paced environment and maintains a clean and safe facility. Loads and unloads trailers in a safe and efficient manner. Ensures that the warehouse is kept clean, orderly and all materials are properly stored. Operates forklifts/pallet jack following all company safety regulations. Participates in training and other learning opportunities to expand knowledge of the company, products, sales and services and performs any other duties needed to help drive our vision, fulfill our mission, and/or abide by our core values. Education, Experience & Qualifications The successful candidate will have a high school diploma or GED, forklift experience and basic operator level maintenance experience, be legally eligible to work in the US , and be 18 years of age or older. It is required to have a demonstrated ability to work as part of a team in a collaborative environment. Excellent listening, communication and problem solving skills, a dedication to safety, proven commitment to work and a self-directed attitude are expected. Attributes Patient, team-oriented individual who is dependable, has the ability to multitask, is able to communicate well, focused on delivering excellent customer service, and is open to personal and professional training and development. Benefits Medical, Dental, Vision, Life & Disability Insurance, Maternity & Parental Leave, Flexible Spending Accounts, Discounted Stock Program, 401K, Employee Awards, Employee Assistance Plan, Wellness Incentive, Tuition Assistance, Career Pathways, and More.

Runnings has a career opportunity for a Distribution Center Loader in our Rome, NY location. This position will report directly to the Distribution Center Shipper Lead and Supervisor. The Distribution Center Loaders are responsible for efficiently loading and unloading products into and from dry van trailers including flatbeds. Prior forklift experience or ability to operate a forklift in a safe and efficient manner is required. Pay Range: $17 to $20 per hour ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Loading & unloading of trailers, including flatbeds Maintain proper trailer weight distribution while maximizing trailer cubes/space Perform piece counts to verify accuracy Scan merchandise into inventory using scanning equipment. Scan product and pallets to truck Id's in an accurate manner. Print price tags and price merchandise accordingly. Break down merchandise into smaller quantities for shipping to retail locations. Assist with floor loaded shipments, both inbound and outbound. Responsible for accurate allocation of quantities. Submit packing slips and freight bills as necessary. Cross check quantities to packing slip, making necessary notations when needed. Load merchandise onto proper pallet, shrink wrap when necessary. Properly secure shipments to prevent product and trailer damage. Practice safety in the workplace by using safe work habits with a safety-first mindset. OTHER DUTIES Other duties as assigned for facility operation and deadline needs. May require travel to assist in other facilities or training. MENTAL AND PHYSICAL REQUIREMENTS Computer skills required. Forklift experience required. Frequent lifting up to 50 pounds Long periods of standing & sitting Frequent bending and twisting EDUCATION, TRAINING AND EXPERIENCE High School Diploma or GED preferred. Prior warehouse experience preferred. Prior Forklift experience required. 1 year prior shipping and receiving experience preferred. WORKING ENVIRONMENT AND CONDITIONS Distribution Center environment Cold and warm dock conditions RSI1-CMP

Power-Flo Technologies Auburn is seeking a full-time warehouse driver to join our team. Monday - Friday Schedule, Daytime Hours Benefits: Health, Dental and Vision benefits Overtime Opportunities PTO Program Paid Holidays 401K Salary Range: $15.50 - $20/hour Warehouse Driver Key Responsibilities : Perform basic warehouse work to include, removing sold parts from stock, placing received parts on shelves, processing items for shipment, receiving, driving, organizing etc. Maintain a clean Driver's License Pull and stage orders for shipment Safely and efficiently pick up and deliver orders Load, unload, prepare, inspect, and operate delivery vehicle Plan delivery route to maximize efficiency and productivity for the day Obey all traffic laws and parking regulations Organize Inventory Warehouse Driver Requirements : 2+ years of warehouse experience required High School Diploma or equivalent Current, valid, and clean NYS driver's license (7 years' clean driving record) Ability to obtain & maintain DOT certification Ability to lift 50 pounds and push or pull over 100 pounds Ability to follow processes, procedures, and policies Ability to work well independently, have a great attitude, and be willing to learn Ability to communicate in verbal and written from with functional English skills Excellent organizational and time management skills Box Truck experience (16-18 ft) and Flatbed truck experience is a plus. No CDL required. Forklift experience a plus We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS. For this and other opportunities check out ************************************

Job DescriptionForklift Operator Schedule: M-F 3:30pm-12am Pay: $17.25/hr earning potential! ($15.00/hr base rate plus $1/hr shift differential and $1.25/hr perfect attendance bonus!) What is in it for you? Earn a weekly perfect attendance bonus plus 2nd shift differential pay! Earn Paid Sick Leave Referral Bonus Incentives Health Insurance 401k, Life Insurance, PTO and other benefits upon hire! Forklift Operator Job Duties: Assemble finished goods orders in accordance with Shipping Pick List demands. Scan product as required, advise Supervisor of any inventory discrepancies. Stack product neatly and safely according to standard procedures as defined by Supervision. Stage picked pallets in assigned areas and communicate pallet locations to Supervision. Assist in general housekeeping duties in the warehouse using available cleaning equipment. Follow safety policies and procedures at all times. Other duties as required to meet business needs. Forklift Operator Qualifications: Must have forklift experience Ability to read and write English Must have general math and computer skills Must be able to lift fifty (50) pounds. Must be able to stand on feet all day Excellence attendance required INDITES

The Forklift Operator operates and manages the movement of materials to ensure a clean, organized facility, respects forklift safety criteria, and fulfills production needs. Pay range is $17.50 - $19.00 / hr Key Responsibilities * Completes daily maintenance checks of the assigned unit before operation to ensure safe operation of the equipment and that no repairs are needed. * Notifies technician in advance when aware that equipment will need maintenance. * Operates forklift while in a fast-paced environment and maintains a clean and safe facility. * Loads and unloads trailers in a safe and efficient manner. * Ensures that the warehouse is kept clean, orderly and all materials are properly stored. * Operates forklifts/pallet jack following all company safety regulations. * Participates in training and other learning opportunities to expand knowledge of the company, products, sales and services and performs any other duties needed to help drive our vision, fulfill our mission, and/or abide by our core values. Education, Experience & Qualifications The successful candidate will have a high school diploma or GED, forklift experience and basic operator level maintenance experience, be legally eligible to work in the US , and be 18 years of age or older. It is required to have a demonstrated ability to work as part of a team in a collaborative environment. Excellent listening, communication and problem solving skills, a dedication to safety, proven commitment to work and a self-directed attitude are expected. Attributes Patient, team-oriented individual who is dependable, has the ability to multitask, is able to communicate well, focused on delivering excellent customer service, and is open to personal and professional training and development. Benefits Medical, Dental, Vision, Life & Disability Insurance, Maternity & Parental Leave, Flexible Spending Accounts, Discounted Stock Program, 401K, Employee Awards, Employee Assistance Plan, Wellness Incentive, Tuition Assistance, Career Pathways, and More.

The first 3 letters in workplace safety are Y-O-U! TK Elevator is currently seeking an experienced Warehouse Driver to join our teams in Syracuse and Buffalo, NY. Responsible for the maintenance and delivery of parts, supplies and equipment to job sites in a safe, timely and cost-effective manner. ESSENTIAL JOB FUNCTIONS: * Operates company vehicles, including vans, trucks, stake body trucks, and pick-up trucks to make assigned deliveries and pickups * Assists in the loading, unloading and moving of materials and supplies within the warehouse area; operates a fork lift to move heavy material and physically lifts materials weighing up to 50 pounds * Unloads equipment, parts and supplies at job sites and keeps crews supplied with necessary materials * Maintains inventory in the storage areas of the warehouse. Includes maintaining an inventory of special tools * Performs shipping and receiving functions as assigned * Maintains the upkeep of the warehouse and grounds * Arranges for the upkeep and servicing of company vehicles * Performs other duties as assigned EDUCATION & EXPERIENCE: * Individual must possess a High School diploma or equivalent, effective interpersonal and verbal/written communication skills, ability to prioritize multiple and changing responsibilities * Position requires the ability to and is responsible for driving and operating an F650 Flat Bed Stake Body with 6000lb Rail Lift Gate * This individual will also be responsible for maintaining a clean and organized warehouse * Must be proficient with computers in addition to other responsibilities (Outlook / Microsoft Office) * Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Salary range: $43,800- $60,175. Provided they meet all eligibility requirement under the applicable plan documents, employees will be offered * Medical, dental, and vision coverage * Flexible spending accounts (FSA) * Health savings account (HSA) * Supplemental medical plans * Company-paid short- and long-term disability insurance * Company-paid basic life insurance and AD&D * Optional life and AD&D coverage * Optional spouse and dependent life insurance * Identity theft monitoring * Pet insurance * Company-paid Employee Assistance Program (EAP) * Tuition reimbursement * 401(k) Retirement Savings Plan with company match: Employees can contribute a portion of their pay on a pre-tax or Roth basis. The company provides a dollar-for-dollar match on the first 5% contributed. Additional benefits include: * 15 days of vacation per year * 11 paid holidays each calendar year (10 fixed, 1 floating) * Paid sick leave, per company policy * Up to six weeks of paid parental leave (available after successful completion of 90 days of full-time employment) Eligibility requirements for these benefits will be controlled by applicable plan documents. This is intended to provide a general description of benefits and other compensation and is not a substitute for applicable plan documents or company policies.

Description: Under the Supervision of the Warehouse Manager, and as a member of the operations team, you will operate industrial cutting equipment (saws and/or lathe) to cut metal materials as requested and perform miscellaneous duties as assigned. Receive incoming inventory and package products for shipment to ensure error-free packaging, efficient loading, unloading, and departure of trucks, and accurate product inventory. Verify and keep records on incoming and outgoing inventory. This position is classified as a Safety Sensitive Position due to the work environment and equipment trained and used by staff. Regular Shift 9am-6:30pm Monday through Thursday. Friday 6am-2:30pm. Initial training on Day shift Monday through Friday. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES Operate industrial cutting equipment (saw and/or lathe) to cut materials as requested and perform miscellaneous duties as assigned Unload incoming trucks and move products to proper staging areas using a forklift, pallet jack or crane. Receive incoming materials and compare information on packing slip with purchase orders, invoices, or other documents to verify accuracy of shipment. Prepare orders for shipment by retrieving inventory and packaging appropriately for damage free delivery. Use of company. Maintain a neat and clean work area by sweeping floors, disposing of cardboard, banding, or packing materials, and removing debris. Perform related duties as requested to meet department and or business objectives. After training, use equipment to accurately measure materials, color code, catalog, log inventory, and put product away. With training may operate industrial cutting equipment to cut materials as requested and perform miscellaneous duties as assigned After training, and as necessary, move delivery trucks within the yard and/or operate a NonCDL F450 truck for delivery, to meet production needs. After training, implement facility closure tasks at end of identified shift. Regular and reliable on-site attendance is a requirement of employment. Requirements: QUALIFICATION STANDARDS High School Diploma or High School Equivalent strongly preferred. Mathematical ability to sort, check, count, measure, and verify numbers and or product shipped or received. Demonstrated computer skills in the use of company ERP System as required. Ability to operate material handling equipment after training. Ability to read and write. Good communication skills. Ability to prepare routine administrative paperwork, perform math calculations and perform computer data entry. Valid NY State Class B driver's license and/or CDL endorsement a plus, for back-up driving. SUPERVISORY RESPONSIBILITIES This position does not have any supervisory responsibilities. ACCOUNTABILITIES Contribute to the overall success of the company by performing all assigned duties in a professional, timely and accurate manner. Follow all Company safety policies and procedures as set forth in the Employee Handbook, Safety Policies, and any local/regional/state/national regulations. EQUIPMENT, MACHINES AND SOFTWARE USED: Ability to operate industrial fork trucks/lifts, overhead crane, back saw, and computer to send/receive email messages, post information to a database, and perform basic email and/or data entry in ERP System. Accurately read calipers and measuring instruments determine inventory amounts and customer requirements. With training ability to cutting machinery (saw and/or lathe). Must wear appropriate personal protective equipment including safety shoes, gloves, and safety glasses when performing certain job duties. Eligible staff with NYS CDL or Class B license and training may drive company commercial vehicles. MENTAL AND VISUAL REQUIREMENTS Moderate mental and visual attention required for performing manual work, machine operations, setups, inspections, and adjustments that require frequent decisions to detect and adjust for variance from proper operation. May be required to operate equipment in congested areas involving considerable variety of movement. PHYSICAL ACTIVITIES AND REQUIREMENTS Ability with or without reasonable accommodation perform the physical requirements of the job which include but are not limited to walk, climb, stoop, kneel, crouch, bend, talk, hear, and perform repetitive motion of hands and/or wrists to finger, grasp, handle, feel, push, pull, reach. Visual acuity to perform inspection of materials, reading of caliper and other measuring devices and operating motorized material handling equipment. Ability to exert more than 20 pounds of force constantly, and/or more than 50 pounds of force frequently, and/or 100 pounds of force occasionally to move objects. ENVIRONMENTAL CONDITIONS Work involves minimal exposure to unusual elements, such as temperature changes, outdoor exposure to weather conditions, fumes, odors, gases, mists, and/or smoke, oils and/or lubricating fluids. (SDS sheets on file and available for review). Work environment involves exposure to physical risks, such as operating dangerous equipment and proximity to moving mechanical parts. COMPENSATION The hourly range is government set minimum wage up to $25.00/hour plus discretionary incentive. EMPLOYER'S DISCLAIMER All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor. Furthermore, the company reserves the right to add to or revise an employee's job duties at any time at its sole discretion. This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship.

Company DescriptionJobs for Humanity is partnering with Aldi to build an inclusive and just employment ecosystem. Therefore, we prioritize individuals coming from the following communities: Refugee, Neurodivergent, Single Parent, Blind or Low Vision, Deaf or Hard of Hearing, Black, Hispanic, Asian, Military Veterans, the Elderly, the LGBTQ, and Justice Impacted individuals. This position is open to candidates who reside in and have the legal right to work in the country where the job is located. Company Name: Aldi Job Description Position Type: Full-Time Average Hours: 30-35 hours per week Starting Wage: $25.00 per hour Duties and Responsibilities: Must be able to perform duties with or without reasonable accommodation. • Selects and receives incoming stock efficiently to effectively fulfill orders received from stores. • Relocates merchandise throughout the warehouse according to product handling guidelines. • Sorts, organizes and loads merchandise strategically in preparation for shipment and unloads incoming shipment from trucks/ back-hauls. • Performs general cleaning duties to achieve warehouse appearance standards and safety requirements. • Participates in-taking warehouse inventory counts according to guidelines. • Cooperates and interacts effectively with peers, suppliers and warehouse leadership through ongoing communication and exchange of information. • Provides input to the warehouse management regarding changes to improve processes. • Inspects product, consults with the warehouse management regarding product quality, safety concerns and sanitation issues. • Acts and decides independently within the delegated area of responsibility. • Assists warehouse management in achieving budgeted goals. • Performs all assigned tasks, accurately, efficiently, and within company policy and procedures. • Follows the ergonomic program according to established procedures. • Operates equipment according to safety guidelines in performance of essential job functions. • Notifies management regarding product quality, safety concerns, and sanitation issues. • Other duties as assigned. Job Qualifications: ALDI Acts Competencies: Perform within ALDI Acts competencies as outlined below. • You must be 18 years of age or older to be employed for this role at ALDI • Acts Conscientiously: Demonstrates concern for quality, product integrity, and safety of one's own and others' work and impact to the stores. • Collaborates and Cooperates with Team: Commits to and supports a collaborative working environment with peers and supervisors. • Demonstrates a Positive Attitude and Resilience: Adapts positively to pressure, setbacks, challenges and change in order to achieve and sustain peak effectiveness. • Drives for Success: Delivers excellent performance by seizing opportunities and proactively taking concrete actions that adhere to ALDI policies and procedures. Goes the extra mile and persistently overcomes obstacles to improve results. • Organizes and Executes with Efficiency: Makes decisions, stays organized and maintains compliance with ALDI standards to support overall productivity and speed in the warehouse both for him/herself as well as the broader team. Job-specific Competencies: Knowledge/Skills/Abilities • Ability to interpret and apply company policies and procedures. • Excellent verbal and written communication skills. • Skill of performing basic arithmetic equations such as addition, subtraction, multiplication and division. • Gives attention to detail and follows instructions. • Ability to work both independently and within a team environment. Education and Experience: • High School Diploma or equivalent preferred. Physical Requirements: • Frequently required to lift and place product weighing up to 45 pounds on pallets at various heights. • Frequently move merchandise from warehouse stock and prepare product for store deliveries. • Frequently required to sit, stand, bend, reach, grip, push, pull, lift, carry and walk throughout the warehouse. • Continuously work in varying temperatures, hot and cold (including outdoor temperatures and refrigerator/freezer environments). • Ability to safely and properly operate powered industrial equipment. ALDI offers competitive wages and benefits, including: 401(k) Plan Company 401(k) Matching Contributions Employee Assistance Program (EAP) PerkSpot National Discount Program In addition, eligible employees are offered: Medical, Prescription, Dental & Vision Insurance Generous Vacation Time & 7 Paid Holidays Up to 6 Weeks Paid Parental Leave at 100% of pay Up to 2 Weeks Paid Caregiver Leave at 100% of pay Short and Long-Term Disability Insurance Life, Dependent Life and AD&D Insurance Voluntary Term Life Insurance Click here to learn more about the benefits ALDI has to offer ALDI is committed to equal opportunity for all employees and applicants. As a proud Equal Opportunity Employer (EOE), we do not discriminate based on race, color, national origin, ancestry, citizenship status, religion, sex, sexual stereotyping, sexual orientation, gender, gender identity, gender expression, age, marital status, mental or physical disability, medical condition, genetic information, military or veteran status, pregnancy (which includes pregnancy, childbirth, and medical conditions related to pregnancy, childbirth, or breastfeeding), or any other protected characteristic. Employment may be contingent upon ALDI's receipt of an acceptable and job-related drug test, motor vehicle report, and/or reference check, as applicable and permissible by law.

The Forklift Operator operates and manages the movement of materials to ensure a clean, organized facility, respects forklift safety criteria, and fulfills production needs. Pay range is $17.50 - $19.00 / hr Key Responsibilities * Completes daily maintenance checks of the assigned unit before operation to ensure safe operation of the equipment and that no repairs are needed. * Notifies technician in advance when aware that equipment will need maintenance. * Operates forklift while in a fast-paced environment and maintains a clean and safe facility. * Loads and unloads trailers in a safe and efficient manner. * Ensures that the warehouse is kept clean, orderly and all materials are properly stored. * Operates forklifts/pallet jack following all company safety regulations. * Participates in training and other learning opportunities to expand knowledge of the company, products, sales and services and performs any other duties needed to help drive our vision, fulfill our mission, and/or abide by our core values. Education, Experience & Qualifications The successful candidate will have a high school diploma or GED, forklift experience and basic operator level maintenance experience, be legally eligible to work in the US , and be 18 years of age or older. It is required to have a demonstrated ability to work as part of a team in a collaborative environment. Excellent listening, communication and problem solving skills, a dedication to safety, proven commitment to work and a self-directed attitude are expected. Attributes Patient, team-oriented individual who is dependable, has the ability to multitask, is able to communicate well, focused on delivering excellent customer service, and is open to personal and professional training and development.

Job DescriptionPower-Flo Technologies Auburn is seeking a full-time warehouse driver to join our team. Monday - Friday Schedule, Daytime Hours Benefits: Health, Dental and Vision benefits Overtime Opportunities PTO Program Paid Holidays 401K Salary Range: $15.50 - $20/hour Warehouse Driver Key Responsibilities : Perform basic warehouse work to include, removing sold parts from stock, placing received parts on shelves, processing items for shipment, receiving, driving, organizing etc. Maintain a clean Driver's License Pull and stage orders for shipment Safely and efficiently pick up and deliver orders Load, unload, prepare, inspect, and operate delivery vehicle Plan delivery route to maximize efficiency and productivity for the day Obey all traffic laws and parking regulations Organize Inventory Warehouse Driver Requirements : 2+ years of warehouse experience required High School Diploma or equivalent Current, valid, and clean NYS driver's license (7 years' clean driving record) Ability to obtain & maintain DOT certification Ability to lift 50 pounds and push or pull over 100 pounds Ability to follow processes, procedures, and policies Ability to work well independently, have a great attitude, and be willing to learn Ability to communicate in verbal and written from with functional English skills Excellent organizational and time management skills Box Truck experience (16-18 ft) and Flatbed truck experience is a plus. No CDL required. Forklift experience a plus We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS. For this and other opportunities check out ************************************

Job Description1st and 2nd shift Production worker$14.17 an hour M-F 7am to 3:30pmM-F 3pm to 11:30pm Production worker in the Utica, NY area will be assisting in production of orders, manufacturing orders light assembly work using tools and machinery provided. assemble and checking product parts, and assisting in the shipment of items. What's in it for you?Staffworks associates are eligible for the following: Accrued Paid Sick Leave Referral Bonus Incentives Become eligible for Health Insurance* and More!! Production worker Responsibilities: Assembling products and parts. Following production guidelines and specifications. Finalizing and packaging products for shipment. Production worker Qualifications: High school diploma/GED. Previous experience working in a factory is beneficial. Must be able to stand for 8 hours. Must be able to lift up to 50 pounds. Attention to detail Able to read and understand order sheets