Forklift operator jobs in Brockton, MA - 947 jobs

Requisition ID 2026-20597 # of Openings 1 Category (Portal Searching) Warehouse/Shipping Type (Portal Searching) Regular Full-Time Fixed Salary USD $62,400.00/Yr. The Pilot Plant Material Coordinator is responsible for managing the flow of materials within the ARI pilot plant, supporting operations and shipping teams, and ensuring compliance with pharmaceutical warehouse standards. This role requires effective communication, independent work, and the ability to train backup team members in all tasks. The coordinator will utilize SAP for inventory management and must be capable of operating a forklift in a warehouse environment. Responsibilities Communicate effectively with multiple teams across the site. Work independently and proactively to support pilot plant operations. Train backup team members in all assigned tasks. Perform SAP transactions: goods receipts, cycle counting, delivery, and scrapping of materials. Operate a forklift and manage material movement within the warehouse. Coordinate with operations and shipping teams to send out NHU intermediates. Handling of HAZ and cold materials Support additional site-specific tasks as assigned. Ensure compliance with safety and quality standards in all material handling activities. Conduct regular inventory audits and reconcile discrepancies. Assist with cycle count investigations and inventory control procedures. Manage expired and reject material according to site procedures. Support PPE restocking, Kanban system, and consumable material management. Collaborate with logistics to coordinate transportation and delivery of materials. Qualifications High school Diploma or equivalent 2-4 years of pharmaceutical warehouse experience. 4 years of general warehouse experience. Demonstrated SAP experience for inventory management. Forklift certification and experience preferred. Strong organizational and communication skills. Ability to work in a fast-paced, dynamic environment. Experience with inventory/material coordination and cycle counting. Familiarity with material handling processes and best practices Physical Demands Must be capable of standing and/or walking for extended periods (at least 2 hours straight, 4 times per an 8-hour day). Must be able to bend, twist, stoop, crouch, squat and reach above shoulder level on a frequent basis May lift and/or move up to 50lbs Must be able to safely operate a forklift What We Offer: Competitive pay & benefits! Comprehensive training and development programs that prepare employees to advance from within. A company focused on creating a positive work and client environment. Employee discounts on entertainment, products, and services nationwide! Connect With Us! Not ready to apply? We look forward to connecting with you in the future! By joining our Talent Network, you can receive job alerts for new positions that match your skills and experience sent straight to your inbox.

Job Category: Mx Materials Maintains, ships, and handles aircraft parts and material. Ensures timely location and acquisition of parts/materials for maintenance. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned to this position as needed. Accurately issues and or delivers parts and materials to various departments. Ensures timely location and acquisition of parts/materials for Maintenance using the computer tracking system and other resources. Ensures proper handling of aircraft parts during transactions, shipping, and receiving to avoid damage, flight cancellations or delays. Performs accurate and timely computer system transactions including parts/materials issue and returns, warehouse transfers and bin transfers. Receives and inspects parts and materials. Logs information in computer. Ensures parts/materials are properly stored, identified and comply with Shelf Life programs. Expedites past-due repair and purchase orders for critical spare requirements. Maintains awareness of Suspected Unapproved Parts (SUP) to prevent entry of SUP into Company inventories. Performs shipping functions of both hazardous/non-hazardous material using a variety of options, including creating and delivering counter to counter shipments for air transport. Reviews the computer system daily for open requisitions to determine if requested parts/materials are still needed and to cancel/delete outdated requisitions. Conducts inventory cycle counts. Accurately reports discrepancies. Works with different departments to ensure maintenance tasks are completed to support the organization. Conducts monthly self-audits including shelf life, hazardous shipping files and various FAA audits. Maintains tooling needed to perform maintenance tasks. Maintains a secure, clean and orderly stockroom per Company policies and procedures and FAA requirements. Ensures compliance with hazardous materials/dangerous goods regulations. Follows and complies with all Environmental Protection Agency polices that impact the airline. Performs other duties as assigned or required. REQUIRED KNOWLEDGE, SKILLS AND ABILITIES The requirements listed below are representative of the knowledge, skill, and/or ability necessary to perform this job. EDUCATION and/or EXPERIENCE. High school diploma or equivalent. Must be at least 18 years old. Possess and maintain a valid Driver's License and a clean driving record. Able to operate forklifts and other machinery. Must be able to pass and remain current on HAZMAT Dangerous Goods Handling course. Possess basic computer skills in Microsoft Office and Word. Must be willing to travel for training and company needs. Must be a self-starter who can provide excellent customer service. PREFERRED EDUCATION and/or EXPERIENCE Previous experience in warehouse, parts, supply chain, etc. is helpful. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Must be able to properly communicate between departments. REASONING/PROBLEM SOLVING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. DECISION MAKING Makes limited decisions and determines best methods to solve problems by referring to established precedents and policies. Impact of decisions is moderately low. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Able to focus with clear vision at 20 inches or less (computer screen). Able to lift or move up to 50 pounds. WORK ENVIRONMENT The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Work in outdoor weather conditions within an open air hangar. Exposed to moderate noise. TRAVEL REQUIREMENTS Travel up to 10% of the time, including overnight travel. Able to work a schedule that supports 24 hour operations. EQUAL OPPORTUNITY EMPLOYER, DISABILITY, AND VETERAN ACCOMODATIONS All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Equal Opportunity Employer, Disability and Veteran Accommodations All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Summary: Newly Weds Foods is a global premium ingredient provider for some of the biggest brand names in the country! With 16 manufacturing plants in North America and many more worldwide, we have a great opportunity for applicants with fork-lift experience. Our fork lift operator performs functions directed towards successfully and efficiently meeting shipping goals for customer orders by performing all required shipping and receiving functions. Prior experiencing operating a fork lift is a must and working in wholesale food manufacturing is a plus! This is a great opportunity to be a part of a $4B global powerhouse that still has a great deal of growth ahead of it! Positions open on Second Shift Benefits: * Medical Insurance * Prescription Drug Plan * Dental/Vision Insurance * Employee Incentive Plan * Flexible Spending Account * Cash Accumulation Plan-401K * Life/AD&D Insurance * Short- Term/Long-Term Disability * Vacation Plan * Paid Holidays * Employee Assistance Program * Adoption Assistance Program * Tuition Reimbursement * Maternity/Paternity Leave * Pet Insurance Essential Functions: * Operates fork lift to load and unload vehicles. * Must insure all products are properly coded. * Must pull orders and assist in warehouse placement of stock. * Must assist in inventory and cycle counts * Must be able to complete all required logs, complete shipping and receiving paperwork, and Perform monthly inventory without assistance. * Assist Set-up in pulling ingredients or loading blending platforms, when there are no other duties that must be done * Must fill in for supervisor * Must have knowledge of finished goods and raw material storage areas * Must have complete understanding of shipping and receiving department including paperwork * This person will operate as a self starter, and be able to multi-task Qualifications: * High School Diploma or GED equivalent. * Minimum of 2 years warehouse experience within a food manufacturing environment. * Ability to comfortably operate standard warehouse equipment, including proficient operation of standup forklift and load move system. Work Environment: The job is performed in the warehouse and production areas where the person will be exposed to strong aromas, airborne dust particles emanating from ingredients being used, and will be in the presence of or otherwise operating machinery. Disclaimer: The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. New Weds Foods is an Equal Opportunity Employer Newly Weds Foods will only employ those who are legally authorized to work in the United States without assistance or support from Newly Weds Foods. Any offer of employment is conditional upon the successful completion of a background investigation and drug screen.

Working at Freudenberg: We will wow your world! Responsibilities: Produce/package/label all products to meet or exceed all quality specifications per shop order, QCIC's and all other required documents provided. Operates various manufacturing and measurement equipment in a safe and orderly manner and notifies Lead/Supervisor when operating problems occur or standards cannot be met. Meet or exceed all due dates assigned to the manufacturing shop order. Responsible for all products manufactured. Understanding of documentation system including reading comprehension, writing and how to complete documents accurately. May assist engineering or manufacturing technicians with validation of processes, product and tooling. Understand and follow gowning processes and procedures while maintaining a clean and presentable work station. Physical Requirements: Involves sitting, standing and/or walking, with frequent ability to exert up to 15 pounds of force to move objects and occasionally exert up to 30 pounds of force to move objects. Qualifications: Must have high school diploma or equivalent Manufacturing experience preferred The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law. Freudenberg Medical LLC

Are you an internal caregiver, student, or contingent worker/agency worker at UMass Memorial Health? CLICK HERE to apply through your Workday account. Exemption Status: Non-Exempt Hiring Range: $18.30 - $32.94 Please note that the final offer may vary within this range based on a candidate's experience, skills, qualifications, and internal equity considerations. Schedule Details: Monday through Friday, Weekends - No Weekends Required Scheduled Hours: mixed Shift: 4 - Mixed Shift, 8 Hours (United States of America) Hours: 0 Cost Center: 99940 - 6148 Transportation Service This position may have a signing bonus available a member of the Recruitment Team will confirm eligibility during the interview process. Everyone Is a Caregiver At UMass Memorial Health, everyone is a caregiver - regardless of their title or responsibilities. Exceptional patient care, academic excellence and leading-edge research make UMass Memorial the premier health system of Central Massachusetts, and a place where we can help you build the career you deserve. We are more than 20,000 employees, working together as one health system in a relentless pursuit of healing for our patients, community and each other. And everyone, in their own unique way, plays an important part, every day. I. Major Responsibilities: 1. Operates light trucks, vans and other vehicles to transport supplies. May drive large 26 ft, 26,001 lb capacity box truck. 2. Operates pallet mover. 3. Loads and unloads supplies, secures in truck; transports safely. 4. Delivers supplies to main campus loading docks, and to offsite departmental customers as needed. 5. Completes accurately all delivery records required. 6. Participates in all Material Handler/Storekeeper job activities including receiving, stocking, picking and delivering supplies. 7. Participates in periodic physical inventory of supply locations. II. Position Qualifications: License/Certification/Education: Required: 1. High school graduate or equivalent. 2. Must possess appropriate Massachusetts motor vehicle operator's license. Experience/Skills: Required: 1. Able to communicate effectively with co-workers. 2. Able to read, write and understand basic instructions, verbal and written. 3. Able to perform basic arithmetic functions. 4. Able to stand, walk, stoop, bend, reach throughout the workday. 5. Able to lift 50 lbs. 6. Able to push and pull wheeled carts up to 300 lbs. 7. Employees must be at least 18 years of age to perform this role. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. We're striving to make respect a part of everything we do at UMass Memorial Health - for our patients, our community and each other. Our six Standards of Respect are: Acknowledge, Listen, Communicate, Be Responsive, Be a Team Player and Be Kind. If you share these Standards of Respect, we hope you will join our team and help us make respect our standard for everyone, every day. As an equal opportunity and affirmative action employer, UMass Memorial Health recognizes the power of a diverse community and encourages applications from individuals with varied experiences, perspectives and backgrounds. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity and expression, protected veteran status or other status protected by law. If you are unable to submit an application because of incompatible assistive technology or a disability, please contact us at ***********************************. We will make every effort to respond to your request for disability assistance as soon as possible.

Job Description Nucar Parts Warehouse is looking to add a parts shipper/receiver to our team! This position requires an overnight schedule. Job Requirements: Attention to detail Keep a clean and organized work area Receive and inspect incoming inventory, verifying quantities and condition against purchase orders and packing slips Responsible for verifying and packing customer orders to be shipped Responsible for maintaining inventory levels and completing weekly bin counts Education and/or Experience: High School Diploma or Equivalent Prior warehouse and/or automotive parts experience preferred Forklift training preferred (not required) We Offer: Clean and Modern Facilities Medical, Dental, Vision Coverage Company Paid Life Insurance Paid Vacations, Paid Holidays, 401(K) with Company Contribution We are excited about meeting you! DCD Automotive/Nucar is a drug free, equal opportunity employer that promotes from within operating in comfortable, modern and safe facilities. Job Posted by ApplicantPro

Are you looking to build your career in machining and manufacturing? We're seeking a CNC Machine Operator to join our team and play a key role in keeping production running smoothly. In this role, you'll work hands-on with CNC machines, ensuring quality parts are produced to spec while learning and growing your technical skills. What You'll Do: •Load and unload CNC machines and ensure parts meet quality standards. •Inspect parts and troubleshoot basic issues during production. •Read and interpret blueprints and drawings to complete jobs accurately. •Use measuring tools such as micrometers, calipers, indicators, and gauges. •Maintain safety and quality standards in a fast-paced production environment. What We're Looking For: •High school diploma or equivalent. •2+ years of CNC or machining experience preferred, but not required-we're willing to train the right person. •Basic machining knowledge and ability to use common inspection tools. •Strong work ethic, reliability, and ability to work independently with minimal supervision. •Team-oriented mindset and commitment to safety and quality. •Must be authorized to work in the U.S. Full-time.

Job Title: Kitting/Warehouse Operator First shift in the Distribution Center is 8am - 4: 30pm Under direct supervision, this position is responsible for the Kitting Room Operation. The team member will perform the physical and administrative tasks involved in the Kitting Room. The Kitting Room Operator is responsible for ensuring the timely and accurate issuance and delivery of materials required for production and ensuring the Kitting Room has proper workflow to meet the demand. Applicable standard operating procedures and following through on all material movements to guarantee they are handled in accordance with applicable FDA and cGMP procedures. This position will work during the core business hours and requires working an 8-hour shift. Responsibilities: Operate systems and equipment such as computers, software and printers as trained and specified. Accurate and timely ERP System (AX) transaction of any material movement performed. Maintains work areas and equipment in a functioning, clean and orderly condition. Safely operates a forklift, hand truck or other material transport equipment;must be open to be trained. Performance of material pre-issuance tasks like Silicone Mixture preparation, siliconizing Raw material as needed. Proper End of Shift cleanup which includes but not limited to, emptying all trash bins, boxing of returned empty trays, cleaning of workstations and work areas, removing empty pallets from the Kitting Room and placing bad pallets appropriately. Detailed communication of End of Shift report to incoming shift. Be able to communicate any workplace issues or concerns with upper management following the appropriate chain of command. Timely meets training deadlines. Train others on work instructions when required. Usage of manual pallet jacks for pallet movement. Ensures safety awareness and adherence to all safety policies to minimize safety risks. Participate in team meetings and production training. Perform general duties including, cycle count, housekeeping stocking, safety, and maintenance. Assist other departments when needed. Including but not limited to the warehouse (Packaging, Shipping, Receiving). Performs other duties as required Education and Experience: High School Diploma, GED and/or equivalent combination of education or experience. Minimum Requirements: 1 year of experience in manufacturing operator role with working knowledge of a warehouse environment. No previous Kitting experience required. Preferred Skills and Competencies: Experience with Microsoft Dynamics/AX Software, SAP, or ability to learn Microsoft AX Materials Management module. Proficient in business environment software applications - MS Office Minimum 1 year experience in warehouse, packaging, or manufacturing Support environment preferred. Strong attention to detail. Must be able to effectively prioritize multiple tasks. Highly motivated, proactive problem solver, and a self-starter that can work both independently and in a team environment with minimal supervision. Stand up and sit-down forklift operation experience is a plus. Familiarity with ergonomic lifting techniques. Good communication and organizational skills. Medical device industry experience a plus. Must be proficient in English language to be able to read documentation, work instructions and communicate effectively. Keen eye for quality, is dependable, and will work collaboratively within a team, and possess a positive attitude. Physical Requirements (if applicable): Must be able to lift and transfer loads up to 30-50 lbs. Must be able to safely operate electric and manual pallet jacks. Must be able to stand and bend up to 8 hours a day. Required to left above shoulder frequently and below waist occasionally

Job DescriptionBenefits: 401(k) matching Competitive salary Dental insurance Employee discounts Health insurance Paid time off Vision insurance Are you looking to launch a rewarding career in the marine industry? M&M Marine/Freedom Boat Club of Greater Boston & Cape Cod in Plymouth, MA is seeking a motivated and reliable Marine Forklift Operator to join our team. This is an excellent opportunity to work in a dynamic, outdoor environment surrounded by the boating lifestyle. The Marine Forklift Operator is responsible for the safe and efficient operation of the lift equipment used to move boats and other marine vehicles within the dealership. This role requires attention to detail, adherence to safety protocols, and effective communication with team members. Requirements: Must be 18 years of age or older Professional appearance Have a valid state drivers license with clean RMV report for the past 24 months Have (or ability to obtain within six months of hire) a valid Hoisting License equal to or exceeding a 1A/2C Currently maintains, or is able to secure a Department of Transportation Commercial Driver Medical Certification within 30 days of hire Ability to ascend and descend a ladder, lift 50 pounds and work in all weather conditions Why Join Us? Competitive starting wage with excellent benefits package Opportunities for on-the-job training and career advancement Be part of a fun, supportive team and enjoy the boating lifestyle No college degree required If youre ready to start a career where every day is different and you can grow your skills, we want to hear from you!

Job Description Boston Harbor Shipyard and Marina is seeking a year-round Travel Lift Operator. This job offers a great opportunity to be a part of Ocean Havens, as it is a fast-growing team in an exciting industry! We are seeking someone with a background in hauling boats. Primary responsibilities include operation of boat handling equipment such as hydraulic boat trailers, fork lift, yard crane, and Marine Travelift. Must be able to perform heavy lifting, climbing, and carrying during the job process and always maintain awareness of and consistently practice safe work habits.

The Panther Group is seeking a 5DX Machine Operator to perform inspection of product run through Automated 5DX x-ray inspection equipment as it is manufactured on the SMT line. Essential Duties & Responsibilities Verify process compliance to established 5DX programs with respect to selecting programs, identifying failures called out by the program and entering defect data into OCuity, as well as data transfer between 5DX and PLR. Adhere to all ESD requirements and Board Handling. Use of Moisture Sensitive Device (MSD) handling requirements based on the components' moisture sensitive levels (MSL). Verify product compliance to workmanship standards as documented in work instructions. Verify integrity of data collected by machinery. Communicate defects not captured by equipment to responsible personnel for enhancement of program integrity. Communicate to assembly operators defects being noted during the 5DX program review. Support and follow all ISO standards related to company's various Quality Management Systems. These systems may include, but are not limited to, quality, the environment, health, safety and security. Support all corporate and site 5S objectives. Perform all other duties, as assigned. Qualifications Job Knowledge, Skills & Abilities: Ability to utilize electronic manufacturing system (OCuity) Computer proficiency. Knowledge of Automated Optical Inspection equipment and procedures. Pass IPC-A-610 Modules 1, 2. Ability to work on single task / procedures / products. Highly repetitive or routine duties Ability to support 1-2 product lines / customer(s) Normally receives detailed instructions on work Works under close supervision Education: High School Diploma or GED. Experience Levels: Entry-Level: 0-6 months of related experience. Experienced: 2+ years of related experience. Technical or vocational certification may substitute for experience. Pay $20 - $26 / hour W2, depending on experience #INDENG

North East Weathered Services, LLC is a trusted provider of snow removal. We pride ourselves on our commitment to safety, quality, and customer satisfaction. Our team operates in a fast-paced, outdoor environment, and we are looking for dedicated individuals to join us during our busy season. Job Description: We are seeking skilled and reliable Ventrac/Small Loader Operators for on-call, seasonal positions. The ideal candidates will be available to respond to work as needed, particularly during peak service times. The position requires operating Ventrac tractors and small loaders for snow removal. Qualifications: OSHA 10 certification is mandatory. Experience operating Ventrac tractors and small loaders is preferred. Availability to work on-call, including nights, weekends, and holidays as needed. Strong understanding of safety protocols and procedures. Ability to work independently and as part of a team. Reliable transportation to and from job sites. Physical Requirements: Ability to work outdoors in various weather conditions. Capable of lifting and moving materials up to 50 pounds. Physical endurance to perform manual labor as required. Compensation: Competitive hourly wage based on experience. North East Weathered Services, LLC is an equal opportunity employer. We encourage applications from individuals of all backgrounds and experiences.

Hourly Pay Range: $20.57- $27.56 typically pays the minimum of the pay range Why Work for Goodwill Southern New England?! Referral bonuses Retirement plan contributions Tuition and gym reimbursement Emergency assistance funds Paid time off And more depending on position! SUMMARY Perform routine driving, inspection of transported goods and material handling duties for retail operations. Work under the supervision of the Warehouse Manager RI. SPECIAL REQUIREMENTS Warehouse typically operates seven days per week to support the Agency retail operation. May be required to work weekend (i.e. Saturday, Sunday), evening and holiday hours. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Drive truck with gross vehicle weight under 26,001 lbs. to transport contract materials, finished goods,merchandise, etc., to and from specified destination; perform those services for retail operations whichwill include inter-state travel. Operate mobile phone ( not while driving) and maintain regular communication with Warehouse Coordinator as to location, destination, other required business or emergencies. Verify truckloads against shipping memos and packing lists, as appropriate. Contact supervisor for decision in questionable cases. Pad, stack and secure transportable goods in position to prevent damage and safety hazards. Load and/or unload goods; may be assisted by a helper when loading or unloading. Obtain truck helper's assistance in exiting the truck and follow his/her directions when backing up. Insure that truck is maintained in a safe and properly working condition; check oil, water and fuel levels, tires, lights and brakes on a daily basis…at least twice a day…Pre and Post Trip Inspections. Complete post trip inspection form, and report vehicle status or mechanical problems to Warehouse Coordinator for scheduling of repairs and regular maintenance. Report driving accidents, incidents or traffic violations to supervisor immediately, and complete required reports of the same. Perform emergency roadside repairs as well as minor repairs and general maintenance (e.g. maintaining overall cleanliness of inside/outside of truck, topping off all fluids to proper levels, replacing windshield wiper blades, and lighting bulbs) to truck as required/needed. Safely remove snow and ice from entire vehicle when required/needed. Obtain safety, first aid or other relevant in-service training as required by supervisor. Perform other essential duties when truck is not available or when duties are completed, as directed by supervisor. Responsible for the movement of materials for the plant, in-house or at other sites, to include loading and unloading of trucks, movement of raw materials and completed shipments to and from sites, house call pickups, and storage of goods. Dispose of waste materials in and around job sites. Follow verbal instructions or read work orders to determine materials and containers to be moved. Load materials into and from vehicles, install strapping, bracing or padding to prevent shifting or damage in transit, assisting truck driver. Convey materials to and/or from storage or work sites to designated areas using hand truck and tow motor. Participate in training regarding proper and safe operation of hand truck and tow motor. Occasionally count, weigh and/or record number of units of material moved or handled. Assist in preparation of all shipping documentation for materials being shipped from premises. Lift heavy objects by hand. Maintain clean work area, machines and/or equipment. Responsible for operation of baler equipment including but not limited to pricing, inventory control, etc. Will notify supervisor in the event of problems with equipment. Remove snow/ice from sidewalks at main office and at other locations as necessary to ensure safe environments. Perform other related essential duties as required or assigned by supervisor. Requirements QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED); plus two (2) to five (5) years related experience and/or training. LANGUAGE SKILLS Ability to read and write English, comprehend work orders, shipping orders, simple instructions, short correspondence, and memos. Simple instructions, short correspondence, and memos. Ability to communicate with customers in one-on-one situations. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with standardized situations with only occasional or no variables. OTHER SKILLS AND ABILITIES Ability to operate tow motor and hand truck. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand and walk. The employee frequently is required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds. In addition, the employee is regularly required to push crates (on wheels) that may weigh up to 600 pounds. Crates may be moved on flat or sloped surfaces. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, and depth perception. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to outside weather conditions. The employee occasionally works near moving mechanical parts. The noise level in the work environment is usually moderate. CERTIFICATES, LICENSES, REGISTRATIONS Vehicle has maximum gross vehicle weight (GVW) over 10,001 lbs. and under 26,001lbs.and is registered for interstate travel. As such, a valid driver license with proper credentialing is required in addition to a Current Medical Card. (Note: A driver may have a CDL-B or CDL-A but a commercial driver license is not required.) Position requires ability to obtain and maintain current certification to operate tow motor. OTHER SKILLS AND ABILITIES Ability to operate tow motor and hand truck. Maintain current certification for operation of tow motor. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; and talk or hear. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 60 pounds and occasionally lift and/or move more than 100 pounds. In addition, the employee is regularly required to push crates (on wheels) that may weigh up to 600 pounds. Crates may be moved on flat or sloped surfaces. Specific vision abilities required by this job include peripheral vision, and depth perception. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to outside weather conditions. The employee occasionally works near moving mechanical parts. The noise level in the work environment is usually moderate. PPE REQUIREMENTS Protective eyewear and work gloves must be worn operating equipment in the warehouse (e.g. compactor, baler, tipper). Equal Opportunity Employer

About the role If the below is already pre-populated with role details, check through to make sure there's nothing you wish to add. Otherwise, add your job advert relating to the role here. Please note 'about the company details' are already populated on every job advert. About the role If the below is already pre-populated with ro...

Ice Cube Innovation LLC., is a growing company with a state-of-the-art facility. As we continue to grow, we want to bring in the right people to help us continue on the right path. We pride ourselves in cultivating an amazing culture and environment for our company as well as provide the best experience for our customers. Our mission is to provide industry-leading, dependable, and cost-effective handling and logistics to the frozen food industry. Come join our team and be a part of the experience! Position Overview We're looking for Warehouse Operators to join our growing, fast-paced team at Ice Cube Cold Storage in the Fall River, MA Industrial Park. Essential Duties Double Pallet Jack Move and stack materials General housekeeping duties in the warehouse or production area and duties as assigned Follow current good warehousing practice Use common warehouse management software Load and unload trucks Receive/process shipments Perform proper forklift inspections and follow forklift operating guidelines and procedures Qualifications Must have experience on high lifts and ride on pallet jacks Must be able to work in a fast-paced environment Able to work on Computer Warehouse Management System Warehouse and distribution experience required Ability to work in cold environments Benefits: Paid Vacations Sick time earned under the MA paid sick leave. Eligible to participate in the company's group Health and Dental Insurance after 30 days of employment. Paid Company Holidays Eligible to participate in the company's 401k Safe Harbor after 3 months or more with the company, with a match of up to 4% of gross earnings. Weekly pay Ice Cube Innovation is an equal opportunity employer and values diversity. We recruit, hire, assign and promote without regard to race, color, religion, gender, sexual orientation, gender identity/expression, national origin/ancestry, age, disability, marital & veteran status, or any legally recognized protected personal characteristics.

Are you looking for a unique opportunity to be a part of something great? Want to join a 17,000-member team that works on the technology that powers the world around us? Looking for an atmosphere of trust, empowerment, respect, diversity, and communication? How about an opportunity to own a piece of a multi-billion dollar (with a B!) global organization? We offer all that and more at Microchip Technology Inc. People come to work at Microchip because we help design the technology that runs the world. They stay because our culture supports their growth and stability. They are challenged and driven by an incredible array of products and solutions with unlimited career potential. Microchip's nationally-recognized Leadership Passage Programs support career growth where we proudly enroll over a thousand people annually. We take pride in our commitment to employee development, values-based decision making, and strong sense of community, driven by our Vision, Mission, and 11 Guiding Values; we affectionately refer to it as the Aggregate System and it's won us countless awards for diversity and workplace excellence. Our company is built by dedicated team players who love to challenge the status quo; we did not achieve record revenue and over 30 years of quarterly profitability without a great team dedicated to empowering innovation. People like you. Visit our careers page to see what exciting opportunities and company perks await! Job Description: Microchip is seeking a reliable and safety-minded Box Truck Driver/Material Handler that is committed to providing exceptional transport, delivery and customer service. This role will primarily be in transportation but will also be participating in material handling and inventory management functions. Operations of a 20-foot box truck to transport products and materials. May also include hazardous materials. Travel will mostly be between our Microchip location in Beverly, MA and a 3rd party location in Manchester, NH but may include other localized travel or occasional travel to other Microchip locations in CT and PA. Conduct pre-trip and post-trip inspections of the vehicle to ensure safety and functionality, ensuring the completion of any documentation. Follow delivery schedules. Load and unload material from truck. Move materials within the warehouse, storage, or production areas. Ensure proper storage and handling of materials to prevent damage. Maintain a clean and organized vehicle / work environment. Communicate timely and effectively regarding delivery schedules and any potential issues. Adhere to all federal, state, and local regulations as well as company policies. Other projects, duties, or cross-training responsibilities as assigned. Requirements/Qualifications: High school diploma or GED. US Person (ITAR requirement). 3+ years of experience in driving / warehousing / shipping / receiving / distribution including knowledge of UPS and FedEx online shipping system. Experience in using Microsoft Office (Outlook, Word, Excel). Valid standard driver's license (Class C) and clean driving record. Experience driving in inclement weather conditions. Ability to lift/carry/push/pull up to 50+ lbs. Excellent communication and interpersonal skills. Ability to adhere to schedules, follow instructions and work independently. Attention to detail and accuracy. U.S. Export Controls Requirements: This job requires access to technology, materials, software or hardware that is controlled by the export laws of the United States. Candidates are required to provide proof of either US citizenship, Permanent US residency or classification as a protected individual as defined in 8 USC 1324b (a) (3).This position is not eligible for Microchip immigration sponsorship. Travel Time: 75% - 100% Physical Attributes: Carrying, Crouching, Feeling, Foot Controls, Handling, Hearing, Kneeling, Lifting, Other, Pulling, Pushing, Reaching, Seeing, Talking, Works Alone, Works Around Others Physical Requirements: I would say 75% sitting, 15% standing, 10% walking. 80% inside, 20% outside. Pay Range: We offer a total compensation package that ranks among the best in the industry. It consists of competitive base pay, restricted stock units, and quarterly bonus payments. In addition to these components, our package includes health benefits that begin day one, retirement savings plans, and an industry leading ESPP program with a 2 year look back feature. Find more information about all our benefits at the link below: Benefits of working at Microchip The hourly pay range for this position, which could be performed in the US, is $16.83-$41.83.* *Range is dependent on numerous factors including job location, skills and experience. Microchip Technology Inc is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. For more information on applicable equal employment regulations, please refer to the Know Your Rights: Workplace Discrimination is Illegal Poster. To all recruitment agencies: Microchip Technology Inc. does not accept unsolicited agency resumes. Please do not forward resumes to our recruiting team or other Microchip employees. Microchip is not responsible for any fees related to unsolicited resumes.

Location: North Kingstown, United States of AmericaThales people architect identity management and data protection solutions at the heart of digital security. Business and governments rely on us to bring trust to the billons of digital interactions they have with people. Our technologies and services help banks exchange funds, people cross borders, energy become smarter and much more. More than 30,000 organizations already rely on us to verify the identities of people and things, grant access to digital services, analyze vast quantities of information and encrypt data to make the connected world more secure. Position Summary This is an on-site position in North Kingstown, RI This position is eligible for the Americas referral program for external candidates: Tier 1 - $2500 Referral Bonus. Machine Operator will operate various card production equipment to personalize debit/credit cards according to customers' specifications. Work with other operators, technicians, and supervisory staff to achieve daily / monthly goals. Perform minor equipment maintenance and adjustments per written and oral instructions. Work independently, performing quality inspections on own work according to production standards. Identify potential production and quality problems, recommending remedial, corrective or contingency action. Awareness and compliance with all security and production policies & procedures. Essential Functions / Key Areas of Responsibility Must be able to work in a high-paced environment Operate card production equipment and perform related activities Confirm work receipt Formulate and implement work priority decisions Exceed production output and quality standards Perform minor equipment maintenance and adjustments per written and oral instructions Work independently performing quality inspections on own work to production standards Maintain a clean and orderly work area Identify potential production and quality problems; recommending remedial, corrective or contingency action Work with other operators, technicians and supervisory staff to assist with problems and to an effective work environment Awareness and compliance with all security and production policies/procedures Must possess basic computer skills Maintain housekeeping standards of workstation Order supplies as needed Attend appropriate training and meetings as required Meet safety standards Minimum Requirements High School Diploma or equivalent experience Basic computer skills Basic math skills required Good communication skills in both written and verbal Strong analytical, numerical and reasoning abilities Ability to write routine reports and correspondence Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form Ability to establish credibility and be decisive - but able to recognize and support the organization's preferences and priorities Preferred Qualifications 1-3 years' experience in mechanical ability 1-3 years' experience in safety rules and maintenance instructions Intermediate computer skills Physical Demands Required to be standing and operating a machine 6+ hours a day #LI-Onsite #LI-AS007 This position will require successfully completing a post-offer background check. Qualified candidates with [a] criminal history will be considered and are not automatically disqualified, consistent with federal law, state law, and local ordinances. We are an equal opportunity employer, including disability and veteran status. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need an accommodation or assistance in order to apply for a position with Thales, please contact us at ************************************. The reference Total Target Compensation (TTC) market range for this position, inclusive of annual base salary and the variable compensation target, is between Total Target Cash (TTC) 35,888.63 - 58,265.40 USD Annual This reflects how companies in a similar industry and geographic region generally pay for similar jobs. This range helps the Company make pay decisions as one data point among many. Where a position falls within this range is also dependent on other factors including - but not limited to - the employee's career path history, competencies, skills and performance, as well as the company's annual salary budget, the customer's program requirements, and the company's internal equity. Thales may offer additional benefits and other compensation, depending on circumstances not related to an applicant's status protected by local, state, or federal law. (For Internal candidate, if you need more information, please reach out to your HR Shared Service, 1st Point) Thales provides an extensive benefits program for all full-time employees working 30 or more hours per week and their eligible dependents, including the following: •Elective Health, Dental, Vision, FSA/HSA, Voluntary Life and AD&D, Whole Group Life w/LTC, Critical Illness, Hospital Indemnity, Accident Insurance, Legal Plan, Identity Theft, and Pet Insurance •Retirement Savings Plan after 30 days of employment with a company contribution and a match, and with no vesting period •Company paid holidays and Paid Time Off •Company provided Life Insurance, AD&D, Disability, Employee Assistance Plan, and Well-being Program

S&S ACTIVEWEAR - Middleboro, MA JOIN US AND "CREATE YOUR VISION" ABOUT US Be part of something special - a place where work feels like a community, not just a job. We're a vibrant and innovative crew united by a shared passion for creativity, growth, and collaboration. S&S is expanding, and we want to connect with dedicated individuals to join our team and create a best place to work. Our team is driven by innovation and partnership, where your ideas are heard and celebrated. We're building an inclusive environment that values every voice and fosters a culture of mutual support and respect. If you're ready to dive into a dynamic work environment where every day brings new personal and professional growth opportunities, apply today! We'd love to hear from you if you're enthusiastic about being part of a company that values its employees and rewards hard work. Take the next step in your career with us, where you're not just an employee but an essential part of our journey toward success. APPLY NOW, and let's grow together! WE OFFER * Incredible team spirit - At the heart of our success is a culture that cherishes teamwork. We thrive on collaboration and value feedback and innovative thinking. * Opportunities for professional growth - Your contributions are integral to our growth. As we expand, so do your career opportunities to develop and advance. * Exclusive apparel discounts - Ready to upgrade your wardrobe?! As part of S&S, you'll enjoy special discounts on our trendy, high-quality apparel. Stay stylish and save big! * Top-notch employee benefits - We prioritize the health and well-being of our team members with an extensive benefits package, including health, dental, and vision coverage, along with retirement planning options. * Fun employee appreciation events - We love celebrating you! Regular events are our way of saying 'thank you' for your hard work and dedication. Prepare for some memorable moments of appreciation and fun. * State-of-the-art equipment - Experience the best in technology and equipment. We provide cutting-edge resources to make your work life safe and efficient! ABOUT THE ROLE The Warehouse Material Handler II - Driver will be responsible for retrieving inventory from both floor locations and up-stock storage for Product Transfers and deliver to the designated area for stocking or shipment. The Restock Driver is required to operate machinery following all safety rules and regulations. COMPENSATION AND SCHEDULE $18.00 hourly Monday - Friday (11:00AM- 11:00PM), Full-Time, Non -Exempt WHAT YOU WILL DO * Operate material handling equipment needed to perform primary role i.e; Forklift, Cherry Picker, Reach Truck, Stock Chaser (Cart), Pallet jack, Scanners, Tablets and Company WMS. * Perform and complete daily safety inspection check list for all equipment used. * Maintain productivity minimum requirements CPH, and work with a sense of urgency * Retrieve inventory from up-stock and floor locations and deliver to designated areas * Operate barcode scanner and use warehouse software * Act professionally and remain focused while working * Safely operate all warehouse equipment * Follow directions of leadership * Perform cleaning activities as required * Maintain a safe and clean warehouse * Maintain a positive attitude * Additional responsibilities as assigned by management WHAT WE'RE LOOKING FOR * High School Diploma * Must be in good standing with the company * Ability to read and understand pick tickets and labels written in English * Ability to use electronic devices * Ability to count, add, subtract, multiply, and divide numbers quickly and accurately * Ability to follow detailed instructions * Detail oriented * Ability to work independently without close supervision * Ability to prioritize assignments in order to meet cut off times. * Able to work in a fast-paced environment * Ability to lift 50 pounds or more * Ability to learn or be trained on using power equipment: Order Picker, Reach Truck, Stock Chaser, Pallet Jack, Electric Pallet Jack, Forklift, etc. * Willing to perform other duties as required * Able to work overtime if required PROTECTIVE EQUIPMENT Must be able to wear proper safety equipment if required (examples include safety toe shoes, bump caps and safety vest). Note: PPE is company-provided with a $100 stipend on safety-toe shoes after 90 days of employment if required for your specific role - not all roles require specific PPE. Please check with your HR/Training team for details on if your role requires specific PPE. PHYSICAL DEMANDS In performing the job of a Restock Driver, the employee must stand and walk for an 8+ hour shift. Additionally, the position requires frequent lifting, carrying, pushing, pulling, stooping, kneeling, crouching, reaching and handling of items up to 50 lbs. Moderate Hand-Eye coordination, near vision, far vision and hearing is required for the operation of warehouse machinery. WORKING ENVIRONMENT * The job will be performed entirely in the warehouse where conditions can range from warm to cool. * The job will be performed around warehouse machines and equipment with a moderate level of noise. EQUAL OPPORTUNITY EMPLOYER S&S Activewear welcomes people of all backgrounds and experiences and are committed to creating a diverse culture and supporting human growth. We are proud to be an equal opportunity employer and is committed to providing equal opportunity for all employees and applicants. We conduct business without regard to sex, race, creed, color, religion, marital status, national origin, citizenship status, age, pregnancy, sexual orientation, gender identity or expression, genetic information, disability, military status, status as a veteran, or any other protected characteristic. Our policy is to recruit, hire, train, promote, assign, transfer, and terminate employees based on their own ability, achievement, experience and conduct and other legitimate business reasons. S&S participates in E-Verify and will provide the federal government with your Form I-9 information to confirm you are authorized to work in the U.S. This job offer is contingent upon the completion of a satisfactory background check.

* Produce/package/label all products to meet or exceed all quality specifications per shop order, QCIC's and all other required documents provided. * Operates various manufacturing and measurement equipment in a safe and orderly manner and notifies Lead/Supervisor when operating problems occur or standards cannot be met. * Meet or exceed all due dates assigned to the manufacturing shop order. * Responsible for all products manufactured. * Understanding of documentation system including reading comprehension, writing and how to complete documents accurately. * May assist engineering or manufacturing technicians with validation of processes, product and tooling. * Understand and follow gowning processes and procedures while maintaining a clean and presentable work station. * * Physical Requirements: * Involves sitting, standing and/or walking, with frequent ability to exert up to 15 pounds of force to move objects and occasionally exert up to 30 pounds of force to move objects. Qualificationsarrow_right * Must have high school diploma or equivalent * Manufacturing experience preferred The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law.