Forklift operator jobs in Cheektowaga, NY - 250 jobs

Requirements QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED). Dr Winder experience a plus. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common, fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee is occasionally required to stand; walk; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. The employee must occasionally lift and/or move up to 100 pounds. Such instances are rare as employees have specific. instruction on approved/unapproved lifts. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to vibration. The noise level in the work environment is usually. moderate American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: ***************************************. Salary Description $24.71/hour - $25.44/hour

Job Description Summary: The Warehouse/Shipping Coordinator is responsible for the effective flow of materials into and out of the facility, coordination of transfers between branches, loading and unloading shipments, ensuring proper material storage based on standard inventory layout, preparing materials for shipment, and manage all associated shipment paperwork. Generates ideas and assists in the implementation of initiatives to improve quality and delivery, and maintains a high quality, clean and efficient work environment. He/She must have the ability to work respectfully with other departments, vendors, customers and co-workers. ob Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Disability insurance Incentive Program Flexible spending account Health insurance Life insurance Vision Primary Accountabilities: Unload and check-in all incoming orders (vendor or inter-branch), matching item to packing slip and bringing any order discrepancies to the attention of the Purchasing Manager; appropriately posting items to KARMAK business system and billing any committed parts to customers or repair orders Coordinate all inter-branch orders (both incoming and outgoing) Work with drivers to schedule special deliveries or pick-ups as needed Coordinate shipping for all outgoing items such as customer orders, parts and core returns, determining appropriate shipping methods for items based on item/package size and weight Pick orders as needed by the Retail and Internal Parts Specialists, labeling and billing orders appropriately Check and maintain stock levels and stock incoming items Ensure all paperwork is routed to the appropriate department for processing, follow-up or filing Safe operation of motorized warehouse equipment, using established guidelines Complete all required training within specified time-frame Special projects or other tasks as assigned by Supervisor or other senior leadership Qualifications that a candidate MUST possess to gain consideration for this position: Minimum of 6 months general work experience Valid New York State Driver License Must be willing to learn and be certified in operating motorized warehouse equipment Ability to use a personal computer, a general understanding of Microsoft Office software programs, and the ability to learn other database or proprietary software programs as needed Must have the ability to frequently lift a minimum of 50 pounds without assistance Must be a team player with a strong sense of commitment to the customer Must be organized, self-motivated and have good written and verbal communication skills Must have good judgment, problem solving skills, and adapt to change readily Training/Educational Requirements: High School Diploma or equivalent

Job Posting: Distribution Underground Equipment Operator Crew Foreman Job Classification: Full Time / Non-Exempt Company: Electra Grid Solutions electragridsolutions.com The Distribution Underground Equipment Operator is responsible for safely operating heavy equipment to support the installation and maintenance of underground electrical distribution systems. This role includes trenching for conduit and cable, transporting equipment, and ensuring compliance with safety standards. The ideal candidate is an experienced operator with a strong work ethic, attention to detail, and a commitment to safety. Job Duties and Responsibilities * Safely operate a mini excavator and other equipment for trenching electrical conduit and cable. * Drive and transport equipment to and from job sites in compliance with DOT regulations. * Inspect trucks and equipment before and after use; report maintenance or repair needs promptly. * Assist with loading and unloading materials and equipment. * Adhere to all company safety policies, procedures, and industry standards. * Communicate effectively with crew members and supervisors to ensure efficient workflow. * Perform additional duties as assigned by supervisors. Qualifications and Job Requirements * Previous experience as an equipment operator (required). * Class A CDL (required). * Strong work ethic and ability to work in a team environment. * Ability to handle physically demanding tasks and work in outdoor environments. * Must pass background check, drug, and alcohol testing. * Willingness to travel to various job sites and work extended hours as needed. Knowledge, Skills, and Abilities * Proficiency in operating mini excavators and related heavy equipment. * Knowledge of trenching practices and underground utility installation. * Ability to identify and address safety hazards promptly. * Strong communication and organizational skills. * Commitment to safety and quality standards. Working Conditions * Work performed outdoors in all weather conditions, including extreme temperatures and inclement weather. * Exposure to electrical hazards, heavy equipment, and construction site conditions. * Frequent travel to various job sites with occasional overnight stays. * Work hours may vary depending on project requirements and emergency response situations. Physical Requirements * Ability to lift and carry up to 50 lbs. * Frequent bending, climbing, stooping, and standing for extended periods. * Comfortable working in physically demanding environments and operating heavy equipment. * Must be able to wear and operate all required Personal Protective Equipment (PPE). Key Attributes * Safety-Oriented - Prioritizes safe work practices and leads by example. * Technically Skilled - Proficient in equipment operation and underground utility installation. * Organized & Efficient - Manages tasks, tools, and jobsite operations effectively. * Team-Focused - Works collaboratively with crew members to achieve project goals. * Professional - Demonstrates integrity, accountability, and reliability. Additional Notes This job description is not intended to be all-inclusive. Employees may be required to perform other duties as necessary to meet the ongoing operational needs of Electra Grid Solutions. Join Our Team Electra Grid Solutions is committed to safety, excellence, and empowering energy infrastructure. If you're an experienced equipment operator who thrives in dynamic environments and values teamwork, we encourage you to apply today. electragridsolutions.com

T he Pfannenberg Group is an internationally active family business in the field of electro-technology. We develop, manufacture and sell technical products of the highest quality in the fields of thermal management of electrical enclosures, signalling technology and process cooling. Our objective is “Protecting Man, Machine and the Environment”. We promote the individual development of our employees by target-oriented management and extensive education and training. Many of the daily challenges we face, are often solved in teamwork. WAREHOUSE WITH SHIPPING OR RECEIVING EXPERIENCE Pfannenberg is looking for an individual to join our team in the Materials department. We are looking for a team member who has good computer skills, has some shipping and or receiving experience with UPS or Fed Ex shipping software and stand up forklift experience to come and work in our fast-paced environment. We offer 1st shift hours (7:00 am-3:30 pm), a robust benefits package and a team atmosphere. We are located in Lancaster, NY just minutes away from Walden and Central area. If you have the skills we are seeking please apply today!

T he Pfannenberg Group is an internationally active family business in the field of electro-technology. We develop, manufacture and sell technical products of the highest quality in the fields of thermal management of electrical enclosures, signalling technology and process cooling. Our objective is “Protecting Man, Machine and the Environment”. We promote the individual development of our employees by target-oriented management and extensive education and training. Many of the daily challenges we face, are often solved in teamwork. WAREHOUSE WITH SHIPPING OR RECEIVING EXPERIENCE Pfannenberg is looking for an individual to join our team in the Materials department. We are looking for a team member who has good computer skills, has some shipping and or receiving experience with UPS or Fed Ex shipping software and stand up forklift experience to come and work in our fast-paced environment. We offer 1st shift hours (7:00 am-3:30 pm), a robust benefits package and a team atmosphere. We are located in Lancaster, NY just minutes away from Walden and Central area. If you have the skills we are seeking please apply today!

Essential Functions * Set up and operation of manufacturing machines. Record machine set-ups every time a new setting or change is made. Understand equipment and perform trouble shooting when required. * Ensure safety policies and procedures are followed. Follow all lock out tag out procedures. * Meet standard rates for various products. Maintain and improve scrap rate. If not maintaining a standard rate,able to identify causes with engineering and or supervisor. Complete all necessary paperwork & documentation in an accurate, timely fashion. * Understand all critical machine & manufactured product features to insure product quality is maintained. * Become knowledgeable and follow the organizations Quality Management System. Understand and maintain a 5-S work area. * Performs other duties as assigned.

Parallel Employment is actively searching for dedicated Machine Operators to join our client's team in the manufacturing industry. As a Machine Operator, you will be responsible for the efficient operation of machinery to produce high-quality products while adhering to safety and quality standards. Key Responsibilities: Set up, operate, and monitor machinery for manufacturing processes. Conduct quality checks on products using measurement tools (calipers, gauges, etc.). Perform routine maintenance on machines and troubleshooting as needed. Adhere to all safety protocols and guidelines throughout operations. Maintain a clean and organized work environment. Document and report production data and any issues that arise. Shift Availability: 1st and 2nd shifts. Pay Rate: $18.50 to $24.50 Depending on Experience Requirements High school diploma or GED. Previous experience as a machine operator or in a manufacturing environment preferred. Basic understanding of machining processes and equipment. Ability to read and interpret technical documents and blueprints. Strong attention to detail and problem-solving skills. Ability to lift up to 50 lbs and stand for long periods. Good communication and teamwork skills. Join our team and grow your career with us! Parallel Employment Group is an Equal Opportunity Employer #IND456

About PCB Piezotronics, Inc. PCB manufactures sensors used by design engineers and predictive maintenance professionals to test and measure vibration, pressure, force, acoustics, load and shock for test, measurement, monitoring and control requirements. Our sensors support testing in aerospace and defense, automotive, transportation, civil engineering, and general R&D industries. PCB is a wholly-owned subsidiary of Amphenol Corporation. With a focus on Total Customer Satisfaction for both our internal and external customers, we have a strong and ongoing commitment to being a great place to work! Learn more about our team | *********** | ************************************************** More Reasons to Join the Team PCB offers a highly collaborative and team-based atmosphere. Total Customer Satisfaction, for internal and external customers alike, is at the heart of our business and guides our interactions every day. Social events and opportunities are hosted throughout the year aimed to develop internal relationships and promote a culture focused on collaboration and teamwork. PCB also provides all full-time team members with 100% employer paid medical premiums for you and your family, a competitive PTO package and 10 company paid holidays. As a Crystals Machine Operator II with PCB Piezotronics, Inc., you will work from drawings and/or written instructions, sets up and operates a variety of manual or CNC machinery and equipment to produce precision parts, performs production tasks that require the ability to follow written/verbal instructions and a thorough knowledge of techniques, materials, tools and equipment. Basic computer skills, and good documentation, time management, and communication skills is beneficial. Additional Duties: Reads and interprets engineering drawings, job routers and job procedures. Learns and uses measuring instruments to inspect parts and may follow Q.C. sampling plan. Responsible for simple set ups, operation, and cleaning of various CNC equipment per procedure. May operate Robodrill's, grinders, dicers, lathes, lappers, low level X-ray equipment, hot plates, ovens, ultrasonic cleaners, laser etchers, vapor degreasers, precision test instrumentation, and other equipment as needed. Completes all required paperwork and makes data collection transactions as needed. Shows commitment to quality and total customer satisfaction through dedicating skills to achieve zero defect status and works with engineering to support continuous improvement projects. Verifies conformance of finished work to ensure compliance to tolerance and company specifications. Works with lead persons or higher-level machinists to identify dull or worn tools and make required tool offsets. Sets up material and fixtures and completes simple jobs. May need to jog and cycle a machine through all functions. Complete preventative maintenance tasks as assigned. May require assistance from lead persons or higher-level machinists. Sets example of a team member for less experienced employees by cooperating and showing commitment to customer service. Assists in training of new team members. Responsible for following company hazardous waste management procedures for hazardous wastes which are routinely generated through the manufacturing processes performed during normal duties. Maintains a clean and organized working area, and follows established department cleaning requirements. Performs other related duties as assigned. Minimum Qualifications: Education: High School graduate or equivalent. Experience: 2 years of experience in machining Must have basic shop math skills: addition, subtraction, division, multiplication, and calculating averages. Must have familiarity with engineering drawings, such as identifying a part number, revision, or drawing legend. Must have familiarity with using measurement equipment such as a micrometer. Preferred Qualifications: BOCES Machine Shop or equivalent skilled trades school, preferred 2 or more years of machining experience preferred Additional Benefits: 100% Company Paid Medical Insurance Premiums Dental and Vision Insurance Company funded HSA or HRA Accounts Paid Time Off Employer paid basic life insurance, short- and long-term disability insurance 401k Company Match Tuition Reimbursement Dependent Scholarship Program Company paid holidays, employee discounts, holiday gift certificates Physical Demands (U.S. only) The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to perform the essential functions with or without reasonable accommodation. Must be able and willing to work with hazardous chemicals, including solvents, acids, and cleaning solutions and wear appropriate personal protective equipment, such as safety glasses, goggles, gloves, steel toe boots, or smocks. While performing the duties of this job, the employee is regularly required to stand. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception, and the ability to adjust focus. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. International Traffic in Arms Regulations This position requires access to “controlled technology” as defined in the Export Administration Regulations (15 C.F.R. §730 et. seq.) and “technical data” as defined in the International Traffic in Arms Regulations (22 C.F.R, Chapter 1, Subchapter M). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. PCB Piezotronics is an equal opportunity employer

About PCB Piezotronics, Inc. PCB manufactures sensors used by design engineers and predictive maintenance professionals to test and measure vibration, pressure, force, acoustics, load and shock for test, measurement, monitoring and control requirements. Our sensors support testing in aerospace and defense, automotive, transportation, civil engineering, and general R&D industries. PCB is a wholly-owned subsidiary of Amphenol Corporation. With a focus on Total Customer Satisfaction for both our internal and external customers, we have a strong and ongoing commitment to being a great place to work! Learn more about our team | *********** | ************************************************** More Reasons to Join the Team PCB offers a highly collaborative and team-based atmosphere. Total Customer Satisfaction, for internal and external customers alike, is at the heart of our business and guides our interactions every day. Social events and opportunities are hosted throughout the year aimed to develop internal relationships and promote a culture focused on collaboration and teamwork. PCB also provides all full-time team members with 100% employer paid medical premiums for you and your family, a competitive PTO package and 10 company paid holidays. As a Crystals Machine Operator II with PCB Piezotronics, Inc., you will work from drawings and/or written instructions, sets up and operates a variety of manual or CNC machinery and equipment to produce precision parts, performs production tasks that require the ability to follow written/verbal instructions and a thorough knowledge of techniques, materials, tools and equipment. Basic computer skills, and good documentation, time management, and communication skills is beneficial. Additional Duties: Reads and interprets engineering drawings, job routers and job procedures. Learns and uses measuring instruments to inspect parts and may follow Q.C. sampling plan. Responsible for simple set ups, operation, and cleaning of various CNC equipment per procedure. May operate Robodrill's, grinders, dicers, lathes, lappers, low level X-ray equipment, hot plates, ovens, ultrasonic cleaners, laser etchers, vapor degreasers, precision test instrumentation, and other equipment as needed. Completes all required paperwork and makes data collection transactions as needed. Shows commitment to quality and total customer satisfaction through dedicating skills to achieve zero defect status and works with engineering to support continuous improvement projects. Verifies conformance of finished work to ensure compliance to tolerance and company specifications. Works with lead persons or higher-level machinists to identify dull or worn tools and make required tool offsets. Sets up material and fixtures and completes simple jobs. May need to jog and cycle a machine through all functions. Complete preventative maintenance tasks as assigned. May require assistance from lead persons or higher-level machinists. Sets example of a team member for less experienced employees by cooperating and showing commitment to customer service. Assists in training of new team members. Responsible for following company hazardous waste management procedures for hazardous wastes which are routinely generated through the manufacturing processes performed during normal duties. Maintains a clean and organized working area, and follows established department cleaning requirements. Performs other related duties as assigned. Minimum Qualifications: Education: High School graduate or equivalent. Experience: 2 years of experience in machining Must have basic shop math skills: addition, subtraction, division, multiplication, and calculating averages. Must have familiarity with engineering drawings, such as identifying a part number, revision, or drawing legend. Must have familiarity with using measurement equipment such as a micrometer. Preferred Qualifications: BOCES Machine Shop or equivalent skilled trades school, preferred 2 or more years of machining experience preferred Additional Benefits: 100% Company Paid Medical Insurance Premiums Dental and Vision Insurance Company funded HSA or HRA Accounts Paid Time Off Employer paid basic life insurance, short- and long-term disability insurance 401k Company Match Tuition Reimbursement Dependent Scholarship Program Company paid holidays, employee discounts, holiday gift certificates Physical Demands (U.S. only) The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to perform the essential functions with or without reasonable accommodation. Must be able and willing to work with hazardous chemicals, including solvents, acids, and cleaning solutions and wear appropriate personal protective equipment, such as safety glasses, goggles, gloves, steel toe boots, or smocks. While performing the duties of this job, the employee is regularly required to stand. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception, and the ability to adjust focus. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. International Traffic in Arms Regulations This position requires access to “controlled technology” as defined in the Export Administration Regulations (15 C.F.R. §730 et. seq.) and “technical data” as defined in the International Traffic in Arms Regulations (22 C.F.R, Chapter 1, Subchapter M). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. PCB Piezotronics is an equal opportunity employer

About Us For more than 50 years, Gowanda Electronics has been a leader in the design, manufacture, and supply of precision electronic components for RF, microwave, and power applications. Components include standard off-the-shelf and custom-designed inductors, chips, chokes, coils, conicals, toroids, transformers, and magnetic devices in surface mount and axial-leaded (thru-hole) configurations that are used in a wide variety of electronic applications around the world. The company offers RoHS-compliant products as well as lead-containing components for QPL military/defense and other demanding requirements. Non-magnetic inductors are also available for situations where magnetic components would compromise system performance, as in medical imaging (MRI) equipment. SUMMARY Will hand-wind, operate a robotic winding machine, assemble components, mold/encapsulate, inspect, or rework small electronic components that will conform to work orders/quality standards/blueprints. TASKS Operate or tend coil-winding machines to wind magnet-wire coils used in electrical components such as resistors, inductors and filters. Working on a team in a cell environment or individually at a work station, will fit, fasten and wind magnet-wire coils, either by hand or with automated (sometimes robotic) machinery. Select and load materials such as coil forms and spooled magnet wire, onto machinery used in coiling winding processes. Watch and observe monitors, dials, or other indicators to make sure a machine is working properly. Prepare components for transition to next step in the assembly process. Cut, strip, and bend wire leads at ends of coils, using hand tools. Apply solutions or conformal coating to certain components, using hand tools; bake product in ovens. Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Verbally communicating pertinent information to Supervisors or Production Managers about problems affecting production output or quality. Work to an established production output rate. Record production and operational data on specified forms or in electronic database. Will be expected to have excellent attendance, good work performance and maintain an attention to quality. May be asked to perform other duties as required by company representatives. SKILLS Operation Monitoring - Watching gauges, displays, monitors, dials, or other indicators to make sure a machine is working properly. Operation and Control - Controlling operations of equipment or systems. ABILITIES Arm-Hand Steadiness - The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position. Finger Dexterity - The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects. Control Precision - The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions. Manual Dexterity - The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects. Near Vision - The ability to see details at close range (within a few feet of the observer). Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences. Oral Expression - The ability to communicate information and ideas in speaking so others will understand. WORKING CONDITIONS Coil Winders and Assemblers work in a well-lit, environmentally controlled manufacturing plant. Some of the operations involve standing and observing, loading and unloading after cycles complete. Other operations involve sitting at work stations while performing minute hand movements on tiny components. Although some workers may work with chemicals, with good ventilation the work is not inherently dangerous. Operators work full time schedules, sometimes long week-day shifts or weekends. QUALIFICATIONS GED/High school education preferred. Able to read and interpret work instructions and diagrams. Basic math skills needed for counting quantities, understanding quality reports. Hand, foot and eye coordination (manual dexterity) to assemble small items. Positive work ethics and the ability to work within a team or individually. Excellent problem solving skills, inter-personal communication skills required Why should you join our team? Our team is growing! At Gowanda Electronics we recognize that our employees play a vital role in our success, so we've created an environment that focuses on innovation, empowerment, and recognition of individual expertise. We are known for our quality products and exemplary customer service, and it all starts with our employees. We are proud of the role we play as technology leaders and the difference we make every day by putting our customers first! We are also committed to providing our employees with a comprehensive package and career growth opportunities! Annual pay increases Medical, Dental, Vision, & Prescription plans Flexible Spending Accounts (FSA) 401K Program with Employer Match Group Life Insurance Short & Long Term Disability Coverage Vacation & Sick (in addition to 11 paid holidays) This position is not eligible for relocation allowance. Gowanda Electronics is an equal-opportunity organization. We recruit, employ, train, compensate and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law. At Gowanda Electronics, we are committed to fostering an inclusive, accessible environment, where all employees are valued and supported. Veterans are encouraged to apply.

About Us For more than 50 years, Gowanda Electronics has been a leader in the design, manufacture, and supply of precision electronic components for RF, microwave, and power applications. Components include standard off-the-shelf and custom-designed inductors, chips, chokes, coils, conicals, toroids, transformers, and magnetic devices in surface mount and axial-leaded (thru-hole) configurations that are used in a wide variety of electronic applications around the world. The company offers RoHS-compliant products as well as lead-containing components for QPL military/defense and other demanding requirements. Non-magnetic inductors are also available for situations where magnetic components would compromise system performance, as in medical imaging (MRI) equipment. SUMMARY Will hand-wind, operate a robotic winding machine, assemble components, mold/encapsulate, inspect, or rework small electronic components that will conform to work orders/quality standards/blueprints. TASKS Operate or tend coil-winding machines to wind magnet-wire coils used in electrical components such as resistors, inductors and filters. Working on a team in a cell environment or individually at a work station, will fit, fasten and wind magnet-wire coils, either by hand or with automated (sometimes robotic) machinery. Select and load materials such as coil forms and spooled magnet wire, onto machinery used in coiling winding processes. Watch and observe monitors, dials, or other indicators to make sure a machine is working properly. Prepare components for transition to next step in the assembly process. Cut, strip, and bend wire leads at ends of coils, using hand tools. Apply solutions or conformal coating to certain components, using hand tools; bake product in ovens. Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Verbally communicating pertinent information to Supervisors or Production Managers about problems affecting production output or quality. Work to an established production output rate. Record production and operational data on specified forms or in electronic database. Will be expected to have excellent attendance, good work performance and maintain an attention to quality. May be asked to perform other duties as required by company representatives. SKILLS Operation Monitoring - Watching gauges, displays, monitors, dials, or other indicators to make sure a machine is working properly. Operation and Control - Controlling operations of equipment or systems. ABILITIES Arm-Hand Steadiness - The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position. Finger Dexterity - The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects. Control Precision - The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions. Manual Dexterity - The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects. Near Vision - The ability to see details at close range (within a few feet of the observer). Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences. Oral Expression - The ability to communicate information and ideas in speaking so others will understand. WORKING CONDITIONS Coil Winders and Assemblers work in a well-lit, environmentally controlled manufacturing plant. Some of the operations involve standing and observing, loading and unloading after cycles complete. Other operations involve sitting at work stations while performing minute hand movements on tiny components. Although some workers may work with chemicals, with good ventilation the work is not inherently dangerous. Operators work full time schedules, sometimes long week-day shifts or weekends. QUALIFICATIONS GED/High school education preferred. Able to read and interpret work instructions and diagrams. Basic math skills needed for counting quantities, understanding quality reports. Hand, foot and eye coordination (manual dexterity) to assemble small items. Positive work ethics and the ability to work within a team or individually. Excellent problem solving skills, inter-personal communication skills required Why should you join our team? Our team is growing! At Gowanda Electronics we recognize that our employees play a vital role in our success, so we've created an environment that focuses on innovation, empowerment, and recognition of individual expertise. We are known for our quality products and exemplary customer service, and it all starts with our employees. We are proud of the role we play as technology leaders and the difference we make every day by putting our customers first! We are also committed to providing our employees with a comprehensive package and career growth opportunities! Annual pay increases Medical, Dental, Vision, & Prescription plans Flexible Spending Accounts (FSA) 401K Program with Employer Match Group Life Insurance Short & Long Term Disability Coverage Vacation & Sick (in addition to 11 paid holidays) This position is not eligible for relocation allowance. Gowanda Electronics is an equal-opportunity organization. We recruit, employ, train, compensate and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law. At Gowanda Electronics, we are committed to fostering an inclusive, accessible environment, where all employees are valued and supported. Veterans are encouraged to apply.

Job Description About Us For more than 50 years, Gowanda Electronics has been a leader in the design, manufacture, and supply of precision electronic components for RF, microwave, and power applications. Components include standard off-the-shelf and custom-designed inductors, chips, chokes, coils, conicals, toroids, transformers, and magnetic devices in surface mount and axial-leaded (thru-hole) configurations that are used in a wide variety of electronic applications around the world. The company offers RoHS-compliant products as well as lead-containing components for QPL military/defense and other demanding requirements. Non-magnetic inductors are also available for situations where magnetic components would compromise system performance, as in medical imaging (MRI) equipment. SUMMARY Will hand-wind, operate a robotic winding machine, assemble components, mold/encapsulate, inspect, or rework small electronic components that will conform to work orders/quality standards/blueprints. TASKS Operate or tend coil-winding machines to wind magnet-wire coils used in electrical components such as resistors, inductors and filters. Working on a team in a cell environment or individually at a work station, will fit, fasten and wind magnet-wire coils, either by hand or with automated (sometimes robotic) machinery. Select and load materials such as coil forms and spooled magnet wire, onto machinery used in coiling winding processes. Watch and observe monitors, dials, or other indicators to make sure a machine is working properly. Prepare components for transition to next step in the assembly process. Cut, strip, and bend wire leads at ends of coils, using hand tools. Apply solutions or conformal coating to certain components, using hand tools; bake product in ovens. Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Verbally communicating pertinent information to Supervisors or Production Managers about problems affecting production output or quality. Work to an established production output rate. Record production and operational data on specified forms or in electronic database. Will be expected to have excellent attendance, good work performance and maintain an attention to quality. May be asked to perform other duties as required by company representatives. SKILLS Operation Monitoring - Watching gauges, displays, monitors, dials, or other indicators to make sure a machine is working properly. Operation and Control - Controlling operations of equipment or systems. ABILITIES Arm-Hand Steadiness - The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position. Finger Dexterity - The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects. Control Precision - The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions. Manual Dexterity - The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects. Near Vision - The ability to see details at close range (within a few feet of the observer). Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences. Oral Expression - The ability to communicate information and ideas in speaking so others will understand. WORKING CONDITIONS Coil Winders and Assemblers work in a well-lit, environmentally controlled manufacturing plant. Some of the operations involve standing and observing, loading and unloading after cycles complete. Other operations involve sitting at work stations while performing minute hand movements on tiny components. Although some workers may work with chemicals, with good ventilation the work is not inherently dangerous. Operators work full time schedules, sometimes long week-day shifts or weekends. QUALIFICATIONS GED/High school education preferred. Able to read and interpret work instructions and diagrams. Basic math skills needed for counting quantities, understanding quality reports. Hand, foot and eye coordination (manual dexterity) to assemble small items. Positive work ethics and the ability to work within a team or individually. Excellent problem solving skills, inter-personal communication skills required Why should you join our team? Our team is growing! At Gowanda Electronics we recognize that our employees play a vital role in our success, so we've created an environment that focuses on innovation, empowerment, and recognition of individual expertise. We are known for our quality products and exemplary customer service, and it all starts with our employees. We are proud of the role we play as technology leaders and the difference we make every day by putting our customers first! We are also committed to providing our employees with a comprehensive package and career growth opportunities! Annual pay increases Medical, Dental, Vision, & Prescription plans Flexible Spending Accounts (FSA) 401K Program with Employer Match Group Life Insurance Short & Long Term Disability Coverage Vacation & Sick (in addition to 11 paid holidays) This position is not eligible for relocation allowance. Gowanda Electronics is an equal-opportunity organization. We recruit, employ, train, compensate and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law. At Gowanda Electronics, we are committed to fostering an inclusive, accessible environment, where all employees are valued and supported. Veterans are encouraged to apply. 6am-2:30pm

Job Description About GTI Fabrication GTI Fabrication is a leading U.S. contract manufacturer specializing in complex metal fabrication, integration, and high-volume manufacturing for critical industries such as energy storage, data center infrastructure, defense, HVAC, and industrial systems. With state-of-the-art facilities in Arizona and New York, we deliver precision, quality, and scalable solutions from raw material to finished product. Position Summary We're seeking reliable Machine Operators skilled in CNC machinery and/or brake press operation to join our growing fabrication team. Operators will be responsible for setting up, running, and monitoring production equipment to shape, cut, bend, and finish metal components to strict specifications. This role supports end-to-end fabrication processes within GTI's advanced manufacturing environment, contributing to production efficiency, quality output, and workplace safety. Key Responsibilities Prepare, set up, and operate CNC machines (e.g., milling, routing, punching) according to work orders and engineering drawings. Set up and operate press brake equipment for bending and forming sheet/plate metal to required dimensions and angles. Load and align tooling, fixtures, and program parts based on engineering specs. Inspect finished parts for quality, dimensional accuracy, and adherence to tolerances using measuring tools (calipers, micrometers, gauges). Perform routine maintenance and cleaning of machinery; report issues to maintenance/lead personnel. Follow established safety protocols and maintain a clean, organized work area. Collaborate with production team members and supervisors to meet daily production goals. Document machine run times, material usage, and production data accurately. Qualifications Required Prior experience operating CNC machines and/or press brakes in a manufacturing or fabrication setting. Basic understanding of machine setup, tooling changes, and part measurement. Ability to read and interpret blueprints, technical drawings, and standard work instructions. Comfortable using precision measuring tools. Commitment to safety standards and quality outcomes. Capacity to stand for extended periods and lift up to ~50 lbs. Preferred Formal technical training or certification in machining, fabrication, or related fields. Experience with industrial metal fabrication processes (sheet/plate steel). Familiarity with CAD/CAM or CNC programming fundamentals. What You'll Get Competitive hourly wage (based on experience) with shift premium where applicable Benefits package: health, dental, vision (if offered) Retirement savings plan options Opportunities for skills advancement and internal mobility On-the-job training and supportive team environment Work Environment This is a hands-on production role in a fast-paced shop floor environment. Operators will work with heavy equipment and fabricated materials, where adherence to safety practices and PPE requirements is essential. Night Shift Monday-Friday 3:30pm-12am

Selective Staffing Solutions has partnered with a progressive contract manufacturer. Their core purpose is to provide innovative manufacturing solutions that creates value for their customers, employees, suppliers, and ownership. Our clients'foundation is to promote the highest level of honesty, integrity, commitment, and quality products to each of their suppliers and customers. They are looking to add Machine Operators to their growing team. Shifts: 1st and 2nd shift available Job Responsibilities: Perform related labor as required to clean up, set up, and organize Return the dies and materials to the proper location Responsible to ensure that all safety and quality start-up procedures are followed\ Responsible to perform all required quality checks utilizing gauges and other measuring devices Responsible to accurately report production in electronic reporting system Responsible to communicate with team members (Supervisor, Quality, Co-workers) on any issues with the machines Have an understanding of what the cause of the issue is and which team member to inform

14 Hall Street, Batavia, New York 14020 Work Shift: 8hr - 3rd Shift 11p-7:30a, Su-Th Batavia (United States of America) The Machine Operator will operate blow-mold/PET/injection molding machines, grinders, trimmer machines, and conveyor systems. Role is responsible for troubleshooting process problems and performing minor maintenance to ensure continued operation of the production line. The Machine Operator is also responsible for following our company's Good Manufacturing Practices. Responsibilities include, but are not limited to the following: * Demonstrates safe work practices by wearing correct PPE and following safety policies * Demonstrates punctuality and adheres to work schedule. * Demonstrates a One Team Cross Functional attitude by working well and effectively with others * Embraces and participates in continuous improvement processes to drive change within the plant. * Adheres to company General Manufacturing Policies * Ensure compliance with corporate and plant safety standards and with applicable laws and regulations issued by regulatory agencies. * Keeps the work area clutter free, clean, and organized. * Introduction to preventive maintenance, mold, neck and blow pin and other mechanical changes. * Operate blow-mold/PET/injection molding machines (including wheels, reciprocating or shuttle machines) to ensure production of quality bottles. * Adhere to quality control and to blow mold process procedure. * Introduction to troubleshooting and resolving process problems. * Performs bottle inspections, such as drop tests for designated lines. * Inspects the quality of bottles during production, packaging and labeling. * Perform audits, weights and quality checks. Machines may vary by site. * Make adjustments to meet product specifications. * Troubleshoot and perform minor repair on blow-mold and support equipment. * Immediately escalates all bottle abnormalities, defects and quality issues when found. * Monitor supply levels of packaging materials and replenish as needed. * Pick up dropped bottles, place into bins and if needed into grinder. * Ensure correct labeling, bottle description and packaging of product in accordance with specific customer requirements. * Move finished goods to designated area. * Prepare & document daily production reports, including rejects, regrinds, line efficiencies and other. * Prepare maintenance request forms and document equipment repairs. * Receives instructions on specific job task by Lead Operator or Supervisor. Assistance is furnished on unusual problems and work is reviewed for application of sound professional judgment. * Other duties as assigned by management. * Duties may differentiate by plant based on equipment and plant design. * Reasonable mandatory overtime may be required due to business needs. QUALIFICATIONS: The requirements listed below are minimum requirements for the job. Reasonable accommodation may be made to enable individuals with disabilities who are otherwise qualified to safely perform the essential functions of the job, unless such accommodation would impose an undue hardship on the Company. EXPERIENCE: * Basic mathematical skills are required. * Basic computer experience. * Blow mold experience. EDUCATION: * Prefer High School diploma or general education degree (GED). TRAINING: * Completion of Altium Production/Machine Operator training within 90 days of hire date. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities who are otherwise qualified to safely perform the essential functions of the job unless such accommodation would impose an undue hardship on the Company. While performing the employee is frequently required to stand; walk; use hands to grasp, handle, or feel; reach out, over and below with hands and arms. The employee is occasionally required to climb, balance, stoop, kneel, crouch, and or crawl. The employee frequently is required to lift, push, pull, and/or move up to 50 pounds. WORK ENVIRONMENT: While performing the duties of this job, the employee is regularly exposed to moving mechanical parts in a production environment. The noise level in the work environment is usually loud. Temperatures inside the plant can fluctuate between hot and cold according to seasonal changes. Personal protective equipment (PPE) is required in the production department and other designated areas. #IND MO Targeted Pay Range: $21.00 - $26.88 Altium Packaging, Our Culture Differentiates Us! We incorporate our Guiding Principles into all aspects and at all levels of the organization and use them as a framework for decision-making. We believe our Guiding Principles foster a culture of excellence that benefits both employees and customers. Our Guiding Principles * Act with Integrity & in Compliance * Drive Value Creation * Be Disciplined Entrepreneurs * Focus on the Customer * Act with Humility * Treat others with Dignity and Respect * Seeking Fulfillment in your Work We Believe in Rewarding our Most Important Resource - Our People! We show our commitment to Total Rewards by providing a competitive, comprehensive benefits package. In addition to medical, dental and vision plans, company holidays and vacation days, tuition reimbursement, learning and training opportunities, bonus potential, and a 401(k) plan with company contributions, Altium Packaging locations offer rewards and recognition programs and opportunities to make a difference in the community. EEO Statement We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class. Take your career to the next level at Altium Packaging!

Empire Coating Inc is currently seeking a Material Handler to join our team. As a Material Handler, you will be integral to supporting our production operation. Specifically, the role is responsible for the safe, accurate, and efficient movement of materials and other receivables. Additionally, this role offers a fantastic opportunity to work directly with our Leadership Team, with a clear path for career advancement and professional growth. About Us: Empire Coating Inc is Western New York's leading coating applicator. Established in 1989, we are a cost-effective high-quality finisher, and we prove it through our work. Our focus industries include, but are not limited to, aerospace, automotive, electronics, medical, and military. Our capabilities include Chem Film, Paint, Powdercoat, Industrial Printing, Masking, Solid Film Lube and Blasting. We are devoted to long term growth through customer commitment and competitive leadership. Position Overview Operate forklift to safely load and unload materials from trucks and trailers. Transport materials to and from storage areas, production lines, and loading docks. Complete delivery paperwork as needed. Perform routine maintenance. Comply with company policies and guidelines. Update inventory, lists, records, and log all completed tasks. Operate a 26' Box Truck as needed: Transporting Goods: Safely transporting goods or passengers to their destinations. Loading and Unloading: Safely load and unload cargo, ensuring it is secure and protected. Operate forklift and/or pallet jack. Compliance: Logging miles, driving hours, and other activities to comply with federal and state laws. Safety Inspections: Conducting vehicle inspections to ensure safety and compliance with regulations. Route and Stops Management: Navigating routes using GPS, Geotab and other technology provided by the company. Paperwork: Completing necessary paperwork related to deliveries or driving. Communication: Report any issues or incidents immediately to dispatch. Develop strong relationships that create trust with our customers. Safety and Compliance: Personal Protective Equipment (PPE): Wear appropriate PPE (gloves, safety glasses) as required on all customer sites. Work Area Safety: Maintain a safe work environment. Other: Other duties as assigned by the Supervisor. Qualifications: Experience: Familiarity with modern warehousing practices and methods Good organizational skills Ability to work in a fast-paced environment Ability to lift heavy objects Current forklift license preferred, ability to drive a forklift required Previous experience in warehouse, or other related field strongly preferred Previous experience as a Box Truck Driver Testing: Pre-employment DOT physical Shift: Monday-Friday 7:30am-4:00pm Total Compensation Package: Wage This role is based in the State of New York which requires the disclosure of salary ranges. The expected salary range for this position is $17.00 - $18.00 per hour. Empire Coating Inc provides salary ranges as a good faith estimate of what the company reasonably expects to pay for the position at the time of posting. Compensation offered to a selected candidate may vary based on factors such as (but not limited to) a candidate's job-related qualifications, skills, competencies, experience, and geographic location. The expected salary range for this position is subject to change and may be modified in the future. Benefits - We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in variety of benefits including: Paid Holidays Paid Vacation / Sick Time 401 (k) Retirement Plan with Company Match Medical, Dental & Vision Insurance Employee Assistance Program (EAP) Health Savings Account (HSA) Company Paid Life Insurance Voluntary Insurance Benefits including Disability Insurance, Accident Insurance, Cancer Insurance, Critical Illness Insurance, Hospital Indemnity Insurance and Life Insurance Empire Coating Inc is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Shift 3rd Shift / 11pm to 7:30am / Sunday to Thursday - Additional days or overtime as required to complete the daily demands Training may be conducted on 1st, 2nd, or 3rd as needed. About the Role: As a core member of our production sanitation team, you will be expected to: Perform daily cleaning of all production equipment and set up of the same equipment for the next shift production run in accordance with all company standards. Be responsible for complete startup & operation of ice cream freezers, filling machines, boxers and shrink wrap. Support the production of safe, high quality products (SQF) & team member safety. As your employer, Perry's will help you to achieve all of the above goals through feedback, education, and continuous professional development. What We're Looking For: Must be able to lift up to 60 pounds frequently Must have basic mechanical skills for machine disassembly and reassembly Able to push and pull, climb, squat and bend frequently throughout the shift Perform basic math skills including addition, subtraction, multiplication, and division of whole numbers and fractions. Perform basic measurements using scales, liquid measures Able to taste and handle dairy products and other ingredients that may contain allergens Must have a completed High School diploma or GED equivalent Basic computer keyboarding skills & touch screen technology Able to work at heights using ladders, platforms or mechanical lifts using OSHA required fall protection Able to handle chemicals and exposure to environmental allergens Essential Duties: Past experience in keeping records and reading/understanding B.O.M.'s Responsible for following all good manufacturing procedures Demonstrated ability to lead/direct team members in the manufacturing of products including & in accordance with SQF,OSHA & Mftg performance requirements Demonstrated ability to learn multiple operations in a manufacturing setting Excellent interpersonal and communication skills Previous experience as a Machine/Equipment Operator (high-speed food Manufacturing a plus) Commitment to living Perry's “values” required. Willing to learn Department specific GMP & SQF requirements Follow all safety procedures Problem solving (analysis and resolution) skills. Excellent interpersonal and communication skills. Flexibility of schedule including potential to train on other shifts Willing to lead by example the Perry's safety culture Availability to work a variable schedule on occasion to cover other team member time off. Why Perry's? Working with and talking about ice cream… how cool is that? Behind every bite of Cookie Dough and every scoop of Panda Paws is a passionate team bringing hard work and creative ideas to the table. For over 100 years, Perry's Ice Cream has been bringing people together to celebrate life's moments, and you can be a part of this magic. If you enjoy ice cream and collaborating with others, Perry's is the place for you! We provide a rewarding supportive environment, and are looking for enthusiastic, talented individuals to join our growing team! Plus, you get to be around ice cream. Who could ask for anything more? Sweet Benefits: In addition to the general perks of getting work with ice cream and a fantastic team all day, Perry's also offers: Health Insurance & Wellness Programs Employer Paid Dental Plans 401K with Employer Matching Paid Family Leave PTO Employer Paid Life Insurance Tuition Assistance & Opportunities for Continuous Learning & Promotion Pay Base Pay Rate: $24.96 / hour - $27.75/ hour Shift Differential: $0.50 / hour Perry's Ice Cream is an Equal Opportunity Employer and drug free facility.

Pay Rate: $17.50-$23.20 Shift: 2nd 3:00pm-11:30pm 3rd 11:00pm-7:30am The hired applicant's wages will fall within the specified range, determined by various factors such as experience level, education, qualifications, certifications, skills, location, performance, market trends, business or organizational requirements. Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve, and it's what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it's our people's too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what's best. Stop and think: how would YOU put our drinks on every table? Essential Job Functions: Adhere to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and wear the required personal protective equipment (PPE) while in the warehouse or production areas (including but not limited to hairnets/beard nets, safety glasses, hearing protection, hard toe and slip/oil resistant shoes, appropriate safety gloves, and seatbelts while operating forklifts) Responsible to adhere to food quality and food safety as per the standard(s) provided by corporate, customer, and/or governing bodies (ex. SQF). Ability to read, understand, and adhere to a production manufacturing schedule and communicate issues or deviations with the appropriate parties. Maintain production flow on machinery by monitoring downstream and upstream issues, supplying raw materials to the equipment, and performing minor servicing if and when needed. Follow all Quality Assurance and Production line standard operating procedures. Follow standard operating procedures to perform equipment changeovers; ability to read imperial and metric measurements. Record all necessary information for production and quality records. Keep accurate downtime reports and documentation. Responsible for performing equipment and general sanitation in your work area or as assigned by leadership. Work closely with all departments to improve quality, increase efficiencies, and reduce waste. Ability to understand visual and auditory cues to identify production or machine related issues. Perform minor machine maintenance. Perform any other duties assigned by leadership including but not limited to cross training, general and plant sanitation, inventory management, training, etc. Required Skills: Experience in a high-speed beverage production environment, beverage production experience preferred. Demonstrates the ability to gain a firm understanding of production machinery/forklifts, including an awareness of technical issues. Ability to work quickly and accurately under pressure. Adeptness in basic mathematical abilities. Skill in understanding and interpreting gauges, thermometers, and weight measurements. Formal training in areas such as WHIMIS, HACCP, Hygiene etc. preferred. Forklift certification may be required. Competencies: Problem-Solving Skills - ability to troubleshoot machinery and production issues efficiently, collaborating with others to resolve complex issues. Teamwork - Collaboration with coworkers to achieve production targets, support for team members, and contribution to a positive work environment. Documentation Skills - accurate recording of production data, completion of required paperwork or electronic documentation, and maintenance of organized records. Safety Awareness - knowledge of safety protocols, hazard identification, and adherence to safety regulations at all times. Timely and accurately completes all required monthly training. Communication Skills - Effective verbal and written communication with team members and supervisors, reporting issues accurately, and collaborating to ensure smooth workflow. Follows equipment down-time escalation process schedule. Education and Experience: High School Certification or equivalent. 1-3 years relevant work experience in a manufacturing environment preferred. Working Conditions: Work Schedule: Weekdays, weekends, afternoon, evenings, overnight and holidays may be required. Overtime scheduled as needed. Work Environment: Operating in a fast-paced production plant with numerous moving parts. Noise levels require hearing protection and temperatures can get very hot and/or relatively cold. The environment is structured and supervised, with clear production targets and schedules to meet. Travel Requirements: 0% travel anticipated. Physical Requirements: R = Rarely (0-15%) O = Occasionally (16-45%) F = Frequently (46-100%) Physical Demand R O F Stand X Stoop, kneel, crouch, or crawl X Lifting 50 lbs. (minimum lbs lifted 15lbs) X Carry weight, lift X Walking X Push/Pull 80 lbs. X Driving (Forklift) X Climb (stairs/ladders) or balance X Visual/Sensory - This position requires attention to detail, requiring attention with one or two senses at a time. Coordination and Dexterity: Excellent hand-eye coordination and manual dexterity for precise control of equipment. Mental Stress - There is pronounced pressure from deadlines, production quotas, accuracy, or similar demands. Other Duties: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. Refresco is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, religion, sex, national orientation, sexual orientation, age, marital status, disability, gender identity, gender expression, Veteran status, or any other classification protected by federal, state, or local law. A Career with Refresco Refresco Beverages US, Inc. offers competitive pay and comprehensive benefits, which include: Medical/Dental/Vision Insurance Health Savings Accounts and Flexible Spending Accounts Life and AD&D Insurance Pet Insurance Legal Benefits 401(k) Savings Plan with Company Match 12 Paid Holidays, Vacation, and Paid Time Off Well-being Benefits Discount and Total Reward Programs Join Refresco TODAY and enjoy a rewarding CAREER! Any employment agency, person, or entity that submits a résumé to this career site or a hiring manager does so with the understanding that the applicant's résumé will become the property of Refresco Beverages US, Inc. Refresco Beverages, US Inc., will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person, or entity. Employment agencies that have agreements with Refresco Beverages US, Inc., and have been engaged in a search shall submit a résumé to the designated Refresco recruiter or, upon authorization, submit a résumé to this career site to be eligible for placement fees. Refresco Beverages US, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity, gender expression, Veteran status, or any other classification protected by federal, state, or local law.

Pay Rate: $17.50-$23.20 Shift: 2nd 3:00pm-11:30pm 3rd 11:00pm-7:30am The hired applicant's wages will fall within the specified range, determined by various factors such as experience level, education, qualifications, certifications, skills, location, performance, market trends, business or organizational requirements. Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve, and it's what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it's our people's too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what's best. Stop and think: how would YOU put our drinks on every table? Essential Job Functions: * Adhere to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and wear the required personal protective equipment (PPE) while in the warehouse or production areas (including but not limited to hairnets/beard nets, safety glasses, hearing protection, hard toe and slip/oil resistant shoes, appropriate safety gloves, and seatbelts while operating forklifts) * Responsible to adhere to food quality and food safety as per the standard(s) provided by corporate, customer, and/or governing bodies (ex. SQF). * Ability to read, understand, and adhere to a production manufacturing schedule and communicate issues or deviations with the appropriate parties. * Maintain production flow on machinery by monitoring downstream and upstream issues, supplying raw materials to the equipment, and performing minor servicing if and when needed. * Follow all Quality Assurance and Production line standard operating procedures. * Follow standard operating procedures to perform equipment changeovers; ability to read imperial and metric measurements. * Record all necessary information for production and quality records. Keep accurate downtime reports and documentation. * Responsible for performing equipment and general sanitation in your work area or as assigned by leadership. * Work closely with all departments to improve quality, increase efficiencies, and reduce waste. * Ability to understand visual and auditory cues to identify production or machine related issues. * Perform minor machine maintenance. * Perform any other duties assigned by leadership including but not limited to cross training, general and plant sanitation, inventory management, training, etc. Required Skills: * Experience in a high-speed beverage production environment, beverage production experience preferred. * Demonstrates the ability to gain a firm understanding of production machinery/forklifts, including an awareness of technical issues. * Ability to work quickly and accurately under pressure. * Adeptness in basic mathematical abilities. * Skill in understanding and interpreting gauges, thermometers, and weight measurements. * Formal training in areas such as WHIMIS, HACCP, Hygiene etc. preferred. * Forklift certification may be required. Competencies: * Problem-Solving Skills - ability to troubleshoot machinery and production issues efficiently, collaborating with others to resolve complex issues. * Teamwork - Collaboration with coworkers to achieve production targets, support for team members, and contribution to a positive work environment. * Documentation Skills - accurate recording of production data, completion of required paperwork or electronic documentation, and maintenance of organized records. * Safety Awareness - knowledge of safety protocols, hazard identification, and adherence to safety regulations at all times. Timely and accurately completes all required monthly training. * Communication Skills - Effective verbal and written communication with team members and supervisors, reporting issues accurately, and collaborating to ensure smooth workflow. Follows equipment down-time escalation process schedule. Education and Experience: * High School Certification or equivalent. * 1-3 years relevant work experience in a manufacturing environment preferred. Working Conditions: * Work Schedule: Weekdays, weekends, afternoon, evenings, overnight and holidays may be required. Overtime scheduled as needed. * Work Environment: Operating in a fast-paced production plant with numerous moving parts. Noise levels require hearing protection and temperatures can get very hot and/or relatively cold. The environment is structured and supervised, with clear production targets and schedules to meet. Travel Requirements: * 0% travel anticipated. Physical Requirements: R = Rarely (0-15%) O = Occasionally (16-45%) F = Frequently (46-100%) Physical Demand R O F Stand X Stoop, kneel, crouch, or crawl X Lifting 50 lbs. (minimum lbs lifted 15lbs) X Carry weight, lift X Walking X Push/Pull 80 lbs. X Driving (Forklift) X Climb (stairs/ladders) or balance X * Visual/Sensory - This position requires attention to detail, requiring attention with one or two senses at a time. * Coordination and Dexterity: Excellent hand-eye coordination and manual dexterity for precise control of equipment. * Mental Stress - There is pronounced pressure from deadlines, production quotas, accuracy, or similar demands. Other Duties: * This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. Refresco is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, religion, sex, national orientation, sexual orientation, age, marital status, disability, gender identity, gender expression, Veteran status, or any other classification protected by federal, state, or local law. A Career with Refresco Refresco Beverages US, Inc. offers competitive pay and comprehensive benefits, which include: * Medical/Dental/Vision Insurance * Health Savings Accounts and Flexible Spending Accounts * Life and AD&D Insurance * Pet Insurance * Legal Benefits * 401(k) Savings Plan with Company Match * 12 Paid Holidays, Vacation, and Paid Time Off * Well-being Benefits * Discount and Total Reward Programs Join Refresco TODAY and enjoy a rewarding CAREER! Any employment agency, person, or entity that submits a résumé to this career site or a hiring manager does so with the understanding that the applicant's résumé will become the property of Refresco Beverages US, Inc. Refresco Beverages, US Inc., will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person, or entity. Employment agencies that have agreements with Refresco Beverages US, Inc., and have been engaged in a search shall submit a résumé to the designated Refresco recruiter or, upon authorization, submit a résumé to this career site to be eligible for placement fees. Refresco Beverages US, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity, gender expression, Veteran status, or any other classification protected by federal, state, or local law.