Packer jobs at Frito-Lay - 473 jobs

Assure a quality product is efficiently produced and packed in a safe and proper manner to ensure on-time delivery to the customer. This position covers tending, packing, and utility. PRIMARY DUTIES AND RESPONSIBILITIES: Respond to /and operate machines Identify serious problems for maintenance Assemble and pack boxes with light-weight packaging components consisting of lids and tubs Place boxes of finished goods on skids approximately 24 times per hour On occasion (up to approximately 6 times per hour) lift cases weighing up to 30lbs. to a height of 6 ft. to put on skids Push boxes into case sealer Deliver materials to machines (inserts, film, color, resin, etc.) Inspect product as per quality standards and pack boxes Apply proper labels and identification codes to boxes of product Complete traceability forms and record production data, enter data into computer, verify that correct labels are applied to boxes and production information is correct. Perform online quality checks Maintain a clean and organized work area Perform c/o in a timely manner following procedures and work instructions. Tend 3 lines at a time and/or pack 2 lines at a time and/or run as a utility (filling and pulling boxes, pulling skids to the staging area, filling materials for packer on the lines, and break relieve packers) supply the production lines based on your shift-assigned duties. Follow procedures and guidelines as defined by the Good Manufacturing Practices (GMP) and the Master Cleaning Schedule Performs other related duties as assigned. Qualifications: Ability to effectively function in a broad-based, fast-paced work environment with minimal supervision. The ability to understand and follow verbal and written instructions in English is a requirement. Must be able to read, write and speak English fluently. Physical Demands: The physical demands described here are representative of those that must be met by employees to successfully perform the essential functions of this job. Must be on their feet all day; standing, stooping, squatting, and reaching can be expected along with the lifting of up to 30 lbs. boxes of raw materials and finished goods. Ability to tend 3 lines at one time and/or pack two lines at a time or run as a utility for all production lines as a product packer based on your shift assignment. Quality Standards: Must comply with all plant Good Manufacturing Practices (GMP) and Safe Quality Food (SQF). Safety: Proper use of all safety equipment (i.e., proper use of personal protective gear including hair net, beard net, gloves, hearing protection, and safety glasses) Proactive approach to safety and accident avoidance Maintain proper safety standards according to established Sanitary and Housekeeping Practices (GMP Compliance).

Assure a quality product is efficiently produced and packed to specification in a safe and proper manner to ensure an on-time delivery to the customer. Primary Duties and Responsibilities: Follow and identify proper safety procedures including the use of all safety equipment, personal protective gear and safety glasses Pack all product in a quality manner, effectively and efficiently meeting all specifications required by the customer Safely operate stacking equipment to monitor efficiency output on an hourly basis Ensure protective bag and proper tape are used to set up the box before packing Guarantee the proper labels are readable and applied correctly to boxes of product before either sending to Alvey case packer or hand stacking on skid Accurately complete traceability forms, online check sheets, and record production date, enter date into the computer, verify that correct labels are applied to boxes and production information is correct Use computer HMI to ensure schedule is accurately followed, along with any notes as required per job Support Machine Operator by identifying/correcting/communicating any problems which require maintenance Support Machine Operator through all copy/color changes. Ensure QA approves line before starting new jobs Notify Floater/Supervisor of any material, product, paperwork or equipment issues to ensure timely resolution and not affect customer shipments Maintain a clean and organized work area throughout shift Coordinate and communicate with incoming shift regarding production Follow procedures and guidelines as defined by the Good Manufacturing Practices (GMP) and the Master Cleaning Schedule QUALIFICATIONS Education: High School Diploma or Equivalent Skills/Abilities: Ability to effectively function in a broad-based, fast-paced work environment with minimal supervision Ability to understand and follow verbal and written instructions in English is a requirement Must be self-motivated to complete tasks in a timely manner Strong communication and problem-solving skills Safety: To maintain proper safety standards according to established Sanitary and Housekeeping Practices (GMP Compliance). Proper use of all safety equipment i.e.: proper use of personal protective gear including hairnets, gloves and safety glasses. Physical Demands: The physical demands described here are representative of those that must be met by employees to successfully perform the essential functions of this job. Must be on their feet all day; standing, stooping, squatting, and reaching can all be expected, along with lifting up to 30 lbs. boxes of raw materials and finished goods. 3rd Shift: 11:00pm-7:30am

Job Description SCHEDULE: 3rd shift; Saturday - Wednesday; 11:00pm - 7:00am 1. You are required to punch in and report to your line minimum 5 - 10 minutes prior to the start of your shift to ensure adequate communication for shift start up. 2. Be familiar with and follow safety rules and procedures including safety wear, lockout/tag out, and emergency procedures. Notify a supervisor or production trainer of any safety hazards, or safety suggestions. 3. Continually gain knowledge of the products and the production processes through on-the-job training. 4. Each employee is responsible for confirming their knowledge of the daily product requirements by reading and following the product specification sheet(s) and signing off on them at start-up of the product. This would include the following: a. Monitor weights as required, packing only ones at specified weights. b. Accurately count while packing. c. Correct tape and label placement on exterior packaging. d. Proper stacking pattern on pallets and pallet tags as needed. 5. Visually inspect products to ensure they are free of defects. Alert line operator, shift supervisor, shift coordinator, or quality department personnel to product quality issues. 6. Inform Material Handlers about production packaging needs well after packaging is needed to avoid downtime. 7. Perform specified quality checks as required. 8. Ensure the daily line packaging reports are completed accurately and completely by the end of the shift. 9. Perform a complete and detailed turnover with the next shift. 10. Maintain a neat, orderly, and clean department and work environment throughout the shift. 11. Follow required cleaning duties at end of shift. 12. Assist with the training of new personnel. 13. Be flexible regarding working on multiple production lines on an as needed basis. 14. Perform duties as a team member by assisting coworkers as needed. 15. Perform overtime and other duties as required. JOB SPECIFICATIONS EDUCATION: High School diploma or equivalent is preferred. EXPERIENCE: Some production is preferred. KNOWLEDGE, SKILLS & ABILITIES: Excellent attention to detail, manual dexterity, and ability to maintain speed in picking of parts is required. Basic math skills are required. Flexibility, initiative, and teamwork are required. Must be able to follow directions exactly and be flexible in daily duties. EQUIPMENT OPERATED: Pallet jack (electric and manual), Tape machine, Bottle filler, Speedee filler, Inkjet machine, pallet wrapper, various scales, cartoning, labeling, and assembly equipment, Auto-bagger, mop, bucket, broom, dustpan, and shop vacuum. PHYSICAL REQUIREMENTS: Ability to lift-up to 50 pounds and standing for 8 hours is required.

Job Description SCHEDULE: TUESDAY - SATURDAY; 7:00AM - 3:00PM RESPONSIBILITIES AND JOB ACTIVITIES: 1. Your scheduled start time is: 6:55am, 2:55pm, or 10:55pm depending on your shift. You are allowed to punch in and report to your line 10 minutes prior to the start of your shift to ensure adequate communication for shift start up. 2. Be familiar with and follow safety rules and procedures including safety wear, lockout/tag out, and emergency procedures. Notify a supervisor or production trainer of any safety hazards, or safety suggestions. 3. Continually gain knowledge of the products and the production processes. Pack products according to specification sheets by following product specific instructions in detail. 4. Each employee is responsible for confirming their knowledge of the daily product requirements by reading the product specification sheet(s) and signing off on them at start-up of the product. 5. Continuously monitor the weights (where specified) of products ensuring that they are packed at the specified weights. 6. Accurately count and maintain counting multiples while packing products. 7. Visually inspect products to ensure they are free of defects. Alert line operator, shift supervisor, shift coordinator, or quality department personnel to product quality issues. 8. On external packaging materials, ensure correct tape and labels are used with appropriate positioning per the product specification sheet. MSDS sheets must be included when specified. 9. Ensure all products stacked on skids are properly positioned and correctly wrapped to the skid. Skid tags must be accurately and completely filled out. 10. Inform Material Handlers about production packaging needs well after packaging is needed. (This helps reduce downtime) 11. Perform specified quality checks as required. 12. Ensure the daily line packaging reports are completed accurately and completely by the end of the shift. Also make sure the appropriate batch sheet is completed. (If applicable) 13. Maintain a neat, orderly, and clean department and work environment throughout the shift. 14. Assist with the training of new personnel. 15. Be flexible in regard to working on multiple production lines on an as needed basis. 16. Perform duties as a team member by assisting coworkers as needed. 17. Perform overtime and other duties as required. JOB SPECIFICATIONS EDUCATION High School diploma or equivalent is preferred. EXPERIENCE Some production is preferred. KNOWLEDGE, SKILLS & ABILITIES Excellent attention to detail, manual dexterity, and ability to maintain speed in picking of parts is required. Basic math skills are required. Flexibility, initiative, and teamwork are required. Must be able to follow directions exactly and be flexible in daily duties. EQUIPMENT OPERATED Pallet jack (electric and manual), Tape machine, Bottle filler, Tube filler, Speedee filler, Inkjet machine, pallet wrapper, various scales, cartoning, labeling, and assembly equipment, Auto-bagger, mop, bucket, broom, dustpan, and shop vacuum. PHYSICAL REQUIREMENTS Ability to lift up to 50 pounds and standing for 8 hours is required.

Job Description SCHEDULE: TUESDAY - SATURDAY; 3:00 PM - 11:00 PM RESPONSIBILITIES AND JOB ACTIVITIES: 1. Your scheduled start time is: 6:55am, 2:55pm, or 10:55pm depending on your shift. You are allowed to punch in and report to your line 10 minutes prior to the start of your shift to ensure adequate communication for shift start up. 2. Be familiar with and follow safety rules and procedures including safety wear, lockout/tag out, and emergency procedures. Notify a supervisor or production trainer of any safety hazards, or safety suggestions. 3. Continually gain knowledge of the products and the production processes. Pack products according to specification sheets by following product specific instructions in detail. 4. Each employee is responsible for confirming their knowledge of the daily product requirements by reading the product specification sheet(s) and signing off on them at start-up of the product. 5. Continuously monitor the weights (where specified) of products ensuring that they are packed at the specified weights. 6. Accurately count and maintain counting multiples while packing products. 7. Visually inspect products to ensure they are free of defects. Alert line operator, shift supervisor, shift coordinator, or quality department personnel to product quality issues. 8. On external packaging materials, ensure correct tape and labels are used with appropriate positioning per the product specification sheet. MSDS sheets must be included when specified. 9. Ensure all products stacked on skids are properly positioned and correctly wrapped to the skid. Skid tags must be accurately and completely filled out. 10. Inform Material Handlers about production packaging needs well after packaging is needed. (This helps reduce downtime) 11. Perform specified quality checks as required. 12. Ensure the daily line packaging reports are completed accurately and completely by the end of the shift. Also make sure the appropriate batch sheet is completed. (If applicable) 13. Maintain a neat, orderly, and clean department and work environment throughout the shift. 14. Assist with the training of new personnel. 15. Be flexible in regard to working on multiple production lines on an as needed basis. 16. Perform duties as a team member by assisting coworkers as needed. 17. Perform overtime and other duties as required. JOB SPECIFICATIONS EDUCATION High School diploma or equivalent is preferred. EXPERIENCE Some production is preferred. KNOWLEDGE, SKILLS & ABILITIES Excellent attention to detail, manual dexterity, and ability to maintain speed in picking of parts is required. Basic math skills are required. Flexibility, initiative, and teamwork are required. Must be able to follow directions exactly and be flexible in daily duties. EQUIPMENT OPERATED Pallet jack (electric and manual), Tape machine, Bottle filler, Tube filler, Speedee filler, Inkjet machine, pallet wrapper, various scales, cartoning, labeling, and assembly equipment, Auto-bagger, mop, bucket, broom, dustpan, and shop vacuum. PHYSICAL REQUIREMENTS Ability to lift up to 50 pounds and standing for 8 hours is required.

About Us Unique Industries is a family-owned business with over 60 years of industry experience. When you work for Unique, you get all the perks of larger corporations such as 401K, multiple choices of healthcare plans, generous paid time off, and more. However, the difference between us and a larger corporation is that here at Unique, we are family. Your CEO and management team are involved in day-to-day operations and make sure that each location sees how much they are appreciated through annual company picnics and holiday luncheons. So if you are looking for a job that is exciting, rewarding, and team-focused - then apply today! We would love to have you come join the party. About Our Opportunity We are seeking safety minded team members with an attention to detail for an entry level packaging opportunity in Montoursville, PA. The Packer position supports the business by ensuring the packaging and product they are packing meets all quality standards. We are currently looking for Packers for 2nd shift (3P- 11P). Responsibilities Examining the finished product and ensuring the packaging and product is free of any defects. Ensuring the labeling is correct for identification and item information purposes. Working on production line as assigned, and keeping up with the output of the machine. Perform all duties while adhering to all safety rules and procedures. Qualifications Ability to understand basic written and oral instructions. Ability to perform basic math. Ability to lift up to 25 pounds. High School Diploma or equivalent preferred - Not required. No prior experience or training needed. Unique Industries, Inc. is an equal opportunity employer and affords equal opportunity to all applicants and employees for all positions without regard to race, color, religion, gender, national origin, age, disability, veteran status or any other status protected under local, state or federal laws. #LI-ONSITE

Packages Injection products manually, operates auxiliary equipment and performs quality functions to ensure product meets quality criteria. Follow all work processes implemented in the department, all safety and company guidelines as outlined in Cambro employee handbook. ESSENTIAL JOB FUNCTIONS Ensures quality standards are maintained in handling, packaging and finishing of all products packaged. Comply with safety, operating policies, procedures regarding equipment, materials and finished goods. Operate auxiliary equipment: Hot stamp, Milling, Router, Sonic welder, Glue gun, Band Saw and Spin welder etc. Perform Multi-task jobs: Shrink wrap, Wine Buckets, DSPR6 and multiple machines Ensures correct quantity of product per carton and proper packaging requirements are followed. Labels Cartons, W.I.P., or products accurately. Verifies box and UPC label accuracy with packaged product. Inspects product at each step of secondary and/or packaging process for quality defects. Performs necessary post molding operations and rework as required to adhere to quality standards. Maintains a clean and organized work station. Maintains strict housekeeping guidelines and safety practices at all times. Recognize and report any problems, issues, discrepancies, or questions to Process Technician and/or Supervisor in a timely fashion. Must be able to read and understand instructions for assembly, packaging and operating secondary machinery. Fill out and maintain required data on production related forms. Maintain a clean, safe, and orderly work environment. Maintain reliable and consistent attendance, including being punctual, and dependable in order to meet the needs of the department and the organization. Execute each essential duty satisfactorily in order to perform job successfully. Follows all safety procedures required in work area, wears PPE as needed, attends all safety meetings, and reports safety issues regarding equipment or unsafe/hazardous conditions. Performs effectively as a team member, able to work well with others, open to receive and give feedback, and treats everyone with respect. Takes ownership of own work and behavior, accepts accountability for own actions, encourages solutions, and communicates status of work/projects. Follow all department quality standards/criteria. Raise concerns and issues to immediate manager. Able to understand and demonstrate Cambro company culture, display company core values (Safety, Quality, Respect, and Service). Understands department's key performance indicators and contributes to achieve these goals both individually and as a team. Other duties as needed or required. ADDITIONAL RESPONSIBILITIES Maintains a clean and organized work station. Maintains strict housekeeping guidelines. Must be able to work overtime as needed, remain flexible and open to possible schedule changes in order to meet business needs. REQUIRED QUALIFICATIONS The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High school diploma or general education degree (GED); or up to six months related experience; or equivalent combination of education and experience. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to add, subtract, multiply, and divide in all units of measurement, using whole numbers, common fractions, and decimals. Able to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Able to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PREFERRED QUALIFICATIONS English preferred Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting, walking, standing, bending at the neck, bending at the waist, squatting, climbing, kneeling, crawling, twisting at the neck and waist, repetitive use of hands, simple grasping, power grasping, fine manipulation, pushing and pulling, reaching above and below the shoulder, carrying/lifting up to 50 lbs. Driving cars, trucks, forklifts and other equipment Working around equipment and machinery Exposure to excessive noise Exposure to dust, gas, fumes or chemicals Working at heights Use of special visual or auditory protective equipment Walking on uneven ground Operation of foot controls or repetitive foot movement Risk of exposure to bio-hazard while working such as: bloodborne pathogens, sewage, hospital waste, etc. PPE Requirements Safety glasses Utility gloves Steel-toe slip-resistant shoes Hardhat Hearing protection (e.g. ear plugs, ear muffs) Face shields Face covering (mask) in accordance with company policy. Mfg Packer COMPENSATION RANGE: $17.13 - $17.13 Salary may vary based on experience. CAMBRO is proud to be an equal-opportunity workplace. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against based upon race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic information, military or veteran status, or other characteristics protected by law.

Packages Injection products manually, operates auxiliary equipment and performs quality functions to ensure product meets quality criteria. Follow all work processes implemented in the department, all safety and company guidelines as outlined in Cambro employee handbook. ESSENTIAL JOB FUNCTIONS Ensures quality standards are maintained in handling, packaging and finishing of all products packaged. Comply with safety, operating policies, procedures regarding equipment, materials and finished goods. Operate auxiliary equipment: Hot stamp, Milling, Router, Sonic welder, Glue gun, Band Saw and Spin welder etc. Perform Multi-task jobs: Shrink wrap, Wine Buckets, DSPR6 and multiple machines Ensures correct quantity of product per carton and proper packaging requirements are followed. Labels Cartons, W.I.P., or products accurately. Verifies box and UPC label accuracy with packaged product. Inspects product at each step of secondary and/or packaging process for quality defects. Performs necessary post molding operations and rework as required to adhere to quality standards. Maintains a clean and organized work station. Maintains strict housekeeping guidelines and safety practices at all times. Recognize and report any problems, issues, discrepancies, or questions to Process Technician and/or Supervisor in a timely fashion. Must be able to read and understand instructions for assembly, packaging and operating secondary machinery. Fill out and maintain required data on production related forms. Maintain a clean, safe, and orderly work environment. Maintain reliable and consistent attendance, including being punctual, and dependable in order to meet the needs of the department and the organization. Execute each essential duty satisfactorily in order to perform job successfully. Follows all safety procedures required in work area, wears PPE as needed, attends all safety meetings, and reports safety issues regarding equipment or unsafe/hazardous conditions. Performs effectively as a team member, able to work well with others, open to receive and give feedback, and treats everyone with respect. Takes ownership of own work and behavior, accepts accountability for own actions, encourages solutions, and communicates status of work/projects. Follow all department quality standards/criteria. Raise concerns and issues to immediate manager. Able to understand and demonstrate Cambro company culture, display company core values (Safety, Quality, Respect, and Service). Understands department's key performance indicators and contributes to achieve these goals both individually and as a team. Other duties as needed or required. ADDITIONAL RESPONSIBILITIES Maintains a clean and organized work station. Maintains strict housekeeping guidelines. Must be able to work overtime as needed, remain flexible and open to possible schedule changes in order to meet business needs. REQUIRED QUALIFICATIONS The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High school diploma or general education degree (GED); or up to six months related experience; or equivalent combination of education and experience. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to add, subtract, multiply, and divide in all units of measurement, using whole numbers, common fractions, and decimals. Able to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Able to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PREFERRED QUALIFICATIONS English preferred Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting, walking, standing, bending at the neck, bending at the waist, squatting, climbing, kneeling, crawling, twisting at the neck and waist, repetitive use of hands, simple grasping, power grasping, fine manipulation, pushing and pulling, reaching above and below the shoulder, carrying/lifting up to 50 lbs. Driving cars, trucks, forklifts and other equipment Working around equipment and machinery Exposure to excessive noise Exposure to dust, gas, fumes or chemicals Working at heights Use of special visual or auditory protective equipment Walking on uneven ground Operation of foot controls or repetitive foot movement Risk of exposure to bio-hazard while working such as: bloodborne pathogens, sewage, hospital waste, etc. PPE Requirements Safety glasses Utility gloves Steel-toe slip-resistant shoes Hardhat Hearing protection (e.g. ear plugs, ear muffs) Face shields Face covering (mask) in accordance with company policy. COMPENSATION RANGE: $7.13 - $17.13 Salary may vary based on experience. CAMBRO is proud to be an equal-opportunity workplace. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against based upon race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic information, military or veteran status, or other characteristics protected by law.

1st Shift (6 am - 2 pm) - Production Lines Hourly Rate: $12.00+, plus benefits) The Packer tends machine that performs one or more packaging functions such as filling, marking, labeling, banding, taping, packing, or wrapping containers by performing the following duties. Essential Duties and Responsibilities include the following. Other duties may be assigned. Starts machine and observes operation to detect malfunctions of the machine. Stops machine and reports malfunction to supervisor. Inspects filled container to ensure that product is packaged according to specifications. Feeds product to conveyors, hoppers, or other feeding devices, and unloads packaged product. Replenishes packaging supplies such as wrapping paper, plastic sheet, boxes, cartons, glue, ink, or labels. Mounts supplies on spindles or places supplies in hopper or other feeding devices. Positions and holds container in the machine and depresses pedal, presses the button, or moves the lever to clean, glue, label, sew, or staple container. Start of production follows steps in BT (line clearance and opens line.) Makes sure Lot number is printing correctly on the material. Assist packers in labeling boxes if necessary. Motivate workers to enhance production quantity and at the same time maintain high production standards. Should shadow and learn from a Packer II Assembly/disassembly of tape (Combi) machines Must be able to fill in for an absent Water Spider or Packer II Qualifications: Less than high school education; or up to six months related experience or training; or equivalent combination of education and experience. Ability to regularly lift and /or move up to 25 pounds and frequently lift and/or move up to 50 pounds. Benefits: We value our employees' time and efforts. Our commitment to your success is enhanced by our competitive annual salary, an extensive benefits package including paid time off, medical, dental and vision benefits, 401K plan with company match, and future growth opportunities within the company. Plus, we work to maintain the best possible environment for our employees, where people can learn and grow with the company. We strive to provide a collaborative, creative environment where each person feels encouraged to contribute to our processes, decisions, planning, and culture. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Watch this video to learn more about what we do here at Consolidated Label Overview: The Packer is a great entry level position to learn about the print industry in a warehouse setting! You will be responsible for the packaging of a variety of manufactured labels. Shifts available: Monday-Thursday 5:30am-4:00pm. Friday-Sunday 6:00am-6:00pm. Pay: $14.00/hour to start. Benefits Potential Monthly Production Bonuses Medical Dental Vision Paid Time Off (PTO) 401(k) with Company Match Holiday Pay Supplemental Insurances (Cancer, Critical Illness, Accident, Short Term & Long Term Disability, Life Insurance) Air Conditioned Production Floor & Warehouse What you'll do Perform production duties such as manual lifting, packaging, taping, labeling operations, and sorting. Report defective materials or questionable conditions to the department supervisor Maintain the work area and equipment in a clean and orderly condition Follow established quality management system procedures Complete quality documents to ensure adherence to procedures Adhere to all established safety practices Other duties as assigned Desired Traits/Requirements: Detailed-Oriented and capable of following standard work instructions Working knowledge of Microsoft Office applications Ability to communicate and work with co-workers effectively Physical Demands: While performing the responsibilities of the job, the employee is required to talk and hear. The employee is often required to sit and use their hands and fingers, to handle or feel. The employee is occasionally required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch, or crawl. Vision abilities required to perform this job include close vision. The employee may be required to lift up to 45 lbs. Reasonable accommodations to these requirements can be made to applicants with qualified disabilities. Equal Employment Opportunity At Online Labels Group, we don't just accept difference - we celebrate it, support it, and thrive on it to benefit our employees, our products, and our community. Online Labels Group is proud to be an equal opportunity workplace for all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics.

2nd Shift (3:00 pm - 11:00 pm) - Production Lines Hourly Rate: $12.50+, plus benefits The Packer tends machine that performs one or more packaging functions such as filling, marking, labeling, banding, taping, packing, or wrapping containers by performing the following duties. Essential Duties and Responsibilities include the following. Other duties may be assigned. Starts machine and observes operation to detect malfunctions of the machine. Stops machine and reports malfunction to supervisor. Inspects filled container to ensure that product is packaged according to specifications. Feeds product to conveyors, hoppers, or other feeding devices, and unloads packaged product. Replenishes packaging supplies such as wrapping paper, plastic sheet, boxes, cartons, glue, ink, or labels. Mounts supplies on spindles or places supplies in hopper or other feeding devices. Positions and holds container in the machine and depresses pedal, presses the button, or moves the lever to clean, glue, label, sew, or staple container. Start of production follows steps in BT (line clearance and opens line.) Makes sure Lot number is printing correctly on the material. Assist packers in labeling boxes if necessary. Motivate workers to enhance production quantity and at the same time maintain high production standards. Should shadow and learn from a Packer II Assembly/disassembly of tape (Combi) machines Must be able to fill in for an absent Water Spider or Packer II Qualifications: Less than high school education; or up to six months related experience or training; or equivalent combination of education and experience. Ability to regularly lift and /or move up to 25 pounds and frequently lift and/or move up to 50 pounds. Benefits: We value our employees' time and efforts. Our commitment to your success is enhanced by our competitive annual salary, an extensive benefits package including paid time off, medical, dental and vision benefits, 401K plan with company match, and future growth opportunities within the company. Plus, we work to maintain the best possible environment for our employees, where people can learn and grow with the company. We strive to provide a collaborative, creative environment where each person feels encouraged to contribute to our processes, decisions, planning, and culture. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

At Inpro WT, people come first - and it shows. As an Employees First company with a culture built on respect, balance, and growth, we're proud that so many of our team members have chosen to build their careers here, not just hold a job. With generous time off, a supportive work environment, and a commitment to employee well-being, we've created a workplace where individuals can truly thrive. As we prepare for our exciting relocation to Mint Hill - and celebrate being named a Top Workplace in Charlotte - there's never been a better time to join our growing team. The Packer is responsible for preparing roller shades for shipment by packing them into boxes, labeling boxes, and ensuring all orders are processed accurately and efficiently. This role requires attention to detail, adherence to work order instructions, safe handling of packing equipment, and maintaining a clean and organized workspace. Key Responsibilities: · Pack roller shades into boxes for shipping. · Weigh boxes and create packing labels. · Place shades and packing labels on boxes per work order instructions. · Use strapping machine and staple gun to close boxes securely. · Close orders in the digital management system as orders are completed. · Assign orders to bins and place them in the correct bins. · Maintain a clean, organized, and safe work area at all times. · Follow all company safety protocols and report any hazards immediately. · Collaborate with shipping and production teams to ensure timely order fulfillment. · Adhere to quality control standards to prevent shipping errors. Key Qualifications: · High school diploma or equivalent. · Ability to follow detailed instructions and work accurately. · Basic computer skills for updating digital management systems. · Physical ability to lift boxes and stand for extended periods. · Strong attention to detail and organizational skills. · Ability to lift over 50 lbs.

Packages Injection products manually, operates auxiliary equipment and performs quality functions to ensure product meets quality criteria. Follow all work processes implemented in the department, all safety and company guidelines as outlined in Cambro employee handbook. ESSENTIAL JOB FUNCTIONS Ensures quality standards are maintained in handling, packaging and finishing of all products packaged. Comply with safety, operating policies, procedures regarding equipment, materials and finished goods. Operate auxiliary equipment: Hot stamp, Milling, Router, Sonic welder, Glue gun, Band Saw and Spin welder etc. Perform Multi-task jobs: Shrink wrap, Wine Buckets, DSPR6 and multiple machines Ensures correct quantity of product per carton and proper packaging requirements are followed. Labels Cartons, W.I.P., or products accurately. Verifies box and UPC label accuracy with packaged product. Inspects product at each step of secondary and/or packaging process for quality defects. Performs necessary post molding operations and rework as required to adhere to quality standards. Maintains a clean and organized work station. Maintains strict housekeeping guidelines and safety practices at all times. Recognize and report any problems, issues, discrepancies, or questions to Process Technician and/or Supervisor in a timely fashion. Must be able to read and understand instructions for assembly, packaging and operating secondary machinery. Fill out and maintain required data on production related forms. Maintain a clean, safe, and orderly work environment. Maintain reliable and consistent attendance, including being punctual, and dependable in order to meet the needs of the department and the organization. Execute each essential duty satisfactorily in order to perform job successfully. Follows all safety procedures required in work area, wears PPE as needed, attends all safety meetings, and reports safety issues regarding equipment or unsafe/hazardous conditions. Performs effectively as a team member, able to work well with others, open to receive and give feedback, and treats everyone with respect. Takes ownership of own work and behavior, accepts accountability for own actions, encourages solutions, and communicates status of work/projects. Follow all department quality standards/criteria. Raise concerns and issues to immediate manager. Able to understand and demonstrate Cambro company culture, display company core values (Safety, Quality, Respect, and Service). Understands department's key performance indicators and contributes to achieve these goals both individually and as a team. Other duties as needed or required. ADDITIONAL RESPONSIBILITIES Maintains a clean and organized work station. Maintains strict housekeeping guidelines. Must be able to work overtime as needed, remain flexible and open to possible schedule changes in order to meet business needs. REQUIRED QUALIFICATIONS The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High school diploma or general education degree (GED); or up to six months related experience; or equivalent combination of education and experience. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to add, subtract, multiply, and divide in all units of measurement, using whole numbers, common fractions, and decimals. Able to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Able to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PREFERRED QUALIFICATIONS English preferred Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting, walking, standing, bending at the neck, bending at the waist, squatting, climbing, kneeling, crawling, twisting at the neck and waist, repetitive use of hands, simple grasping, power grasping, fine manipulation, pushing and pulling, reaching above and below the shoulder, carrying/lifting up to 50 lbs. Driving cars, trucks, forklifts and other equipment Working around equipment and machinery Exposure to excessive noise Exposure to dust, gas, fumes or chemicals Working at heights Use of special visual or auditory protective equipment Walking on uneven ground Operation of foot controls or repetitive foot movement Risk of exposure to bio-hazard while working such as: bloodborne pathogens, sewage, hospital waste, etc. PPE Requirements Safety glasses Utility gloves Steel-toe slip-resistant shoes Hardhat Hearing protection (e.g. ear plugs, ear muffs) Face shields Face covering (mask) in accordance with company policy. COMPENSATION RANGE: $7.13 - $17.13 Salary may vary based on experience. CAMBRO is proud to be an equal-opportunity workplace. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against based upon race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic information, military or veteran status, or other characteristics protected by law.

ABOUT U.S. COTTON At U.S. Cotton, we pride ourselves on being the leading manufacturer of high-quality cotton products. Our commitment to innovation, sustainability, and excellence drives us to deliver exceptional value to our customers. With a rich history and a forward-thinking approach, we offer a dynamic and inclusive work environment where employees can thrive and grow. Join us and be part of a team dedicated to making a positive impact in the industry and beyond. To inspect and pack the final product so it can be stored in the warehouse for shipment. SPECIFIC RESPONSIBILITIES Examples of key duties are interpreted as being descriptive and not restrictive in nature. Sort out all defective products before packing. Correctly pack the product into the proper packaging per the dispo. Tape boxes neatly and securely Assure the correct product code/labels are on the box. Place boxes on the proper skid with the correct amount of cases per layer and per skid. Keep packing area neat, clean, and safe. Assisting in sweeping and keeping product off the floor. Communicate to Lead of any quality or sealer problems. Complete all necessary paperwork and all required documentation. Assist other positions within the department as needed. Follow all department and machine rules and procedures. Complete all special projects and/or assignments as directed by the Lead or Supervisor. Other duties as assigned EXPERIENCE Previous manufacturing experience preferred Ability to work in a fast-paced environment with a keen eye and attention to detail. Adequate English skills as well as basic math skills are required. EDUCATION High school graduate or GED equivalency required SKILLS This position requires constant standing. Ability to keep up with six to eight machines with no or minimal help. SPECIAL KNOWLEDGE N/A PHYSICAL REQUIREMENTS See Job Analysis document POSITION IN ORGANIZATION Reports to: Production Supervisor Directly Supervises: None Indirectly Supervises: None RELATIONSHIPS Internal: Supervisor, Lead, Operator, Utility, QA Personnel, Maintenance personnel, Human Resources, Asst. Plant Manager, and Plant Manager External: None

The primary function is to package, box and skid packing material for shipping, according to the specifications on the order. Must be able to work every Friday, Saturday and Sunday, 6:45AM to 7PM. Work 36.75 hours, Paid for 40. This position is also applicable to the $1 per hour shift differential. Job Duties: Maintains a clean and orderly work area/warehouse Maintains a safe working environment by following all company safety policies and procedures and reports unsafe conditions and incidents, while maintaining quality standards Identifies poor quality material and notifies the supervisor and/or Quality Control Responsible for recording orders and maintaining the ending inventory Counts, weighs, measures, or examines packaging and contents of items for conformance to company specifications Completes necessary paperwork, packing slips, pallet lists Moves material to designated areas with forklift Other duties as assigned Job Qualifications: High school diploma or general education degree (GED), one to three years of experience preferred Forklift certification required Ability to work at a fast pace Ability to multi task and read production tickets Ability to perform math calculations including fractions Must be able to read tape measure, including micrometer Must be computer literate Ability to maintain production standards Must be dedicated to continuous improvement Must be able to lift 50 pounds, bend, stretch, or stand for extended periods of time Transcendia is an equal opportunity employer and will consider all candidates for employment without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, disability status, protected veteran status, or any other characteristic protected by law.

The primary function is to package, box and skid packing material for shipping, according to the specifications on the order. Must be able to work 1st Shift (Monday - Friday, 7AM to 3PM). Must be able to work Mandatory OT when required. Job Duties: Maintains a clean and orderly work area/warehouse Maintains a safe working environment by following all company safety policies and procedures and reports unsafe conditions and incidents, while maintaining quality standards Identifies poor quality material and notifies the supervisor and/or Quality Control Responsible for recording orders and maintaining the ending inventory Counts, weighs, measures, or examines packaging and contents of items for conformance to company specifications Completes necessary paperwork, packing slips, pallet lists Moves material to designated areas with forklift Other duties as assigned Job Qualifications: High school diploma or general education degree (GED), one to three years of experience preferred Forklift certification required Ability to work at a fast pace Ability to multi task and read production tickets Ability to perform math calculations including fractions Must be able to read tape measure, including micrometer Must be computer literate Ability to maintain production standards Must be dedicated to continuous improvement Must be able to lift 50 pounds, bend, stretch, or stand for extended periods of time Transcendia is an equal opportunity employer and will consider all candidates for employment without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, disability status, protected veteran status, or any other characteristic protected by law.

Apache Mills, Inc., a worldwide leader in floor mat manufacturing, has immediate openings to join our growing company as a member of our Operations Team. As an environmentally responsible citizen of the global community and a commitment to providing a safe work environment, our products are proudly crafted in the USA. We are currently seeking qualified candidates for Packaging - Material Handler positions to join our 2nd Shift Production Team. This position is scheduled for Monday- Friday, Saturday required as needed There are immediate advancement opportunities for those with the desire, the initiative, and that perform above expectations.This position requires the ability to (this is not a complete job description): work safely in a fast-paced production environment meet or exceed company quality standards maintain regular and predictable attendance comply with company processes and procedures follow verbal and written instructions stand, walk, lift, bend, stoop, and reach while handling material or products work cooperatively, courteously, and respectfully with all team members, vendors, and visitors perform job duties in variable temperatures based on weather conditions (including hot weather) ensure good housekeeping of all areas on company premises successfully complete drug and background screenings Apache Mills, Inc. is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class.EOE M/F/D/VE-verify Employer Health insurance Paid time off Dental insurance 401(k) Vision insurance Life insurance 401(k) matching

Apache Mills, Inc., a worldwide leader in floor mat manufacturing, has immediate openings to join our growing company as a member of our Operations Team. As an environmentally responsible citizen of the global community and a commitment to providing a safe work environment, our products are proudly crafted in the USA. We are currently seeking qualified candidates for Packaging - Material Handler positions to join our 2nd Shift Production Team. This position is scheduled for Monday- Friday, Saturday required as needed There are immediate advancement opportunities for those with the desire, the initiative, and that perform above expectations. This position requires the ability to (this is not a complete job description): work safely in a fast-paced production environment meet or exceed company quality standards maintain regular and predictable attendance comply with company processes and procedures follow verbal and written instructions stand, walk, lift, bend, stoop, and reach while handling material or products work cooperatively, courteously, and respectfully with all team members, vendors, and visitors perform job duties in variable temperatures based on weather conditions (including hot weather) ensure good housekeeping of all areas on company premises successfully complete drug and background screenings Apache Mills, Inc. is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class.EOE M/F/D/VE-verify Employer Health insurance Paid time off Dental insurance 401(k) Vision insurance Life insurance 401(k) matching 2nd shift, 4:30pm - 3am (may require overtime) MANUFACTURING HOURS MAY CHANGE DEPENDING ON ORDERS NORMAL SCHEDULE 3:30-12AM Monday-Friday, Saturday required as needed

Apache Mills, Inc., a worldwide leader in floor mat manufacturing, has immediate openings to join our growing company as a member of our Operations Team. As an environmentally responsible citizen of the global community and a commitment to providing a safe work environment, our products are proudly crafted in the USA. We are currently seeking qualified candidates for Packaging - Material Handler positions to join our 2nd Shift Production Team. This position is scheduled for Monday- Friday, Saturday required as needed There are immediate advancement opportunities for those with the desire, the initiative, and that perform above expectations. This position requires the ability to (this is not a complete job description): work safely in a fast-paced production environment meet or exceed company quality standards maintain regular and predictable attendance comply with company processes and procedures follow verbal and written instructions stand, walk, lift, bend, stoop, and reach while handling material or products work cooperatively, courteously, and respectfully with all team members, vendors, and visitors perform job duties in variable temperatures based on weather conditions (including hot weather) ensure good housekeeping of all areas on company premises successfully complete drug and background screenings Apache Mills, Inc. is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class.EOE M/F/D/VE-verify Employer Health insurance Paid time off Dental insurance 401(k) Vision insurance Life insurance 401(k) matching 2nd shift, 4:30pm - 3am (may require overtime) MANUFACTURING HOURS MAY CHANGE DEPENDING ON ORDERS NORMAL SCHEDULE 3:30-12AM Monday-Friday, Saturday required as needed