Manufacturing Quality Engineer jobs at GE Appliances - 3313 jobs

This position is responsible for ensuring the production of safe, high-quality food products in compliance with regulatory, customer, and company standards. This role leads the facility's food safety and quality programs, oversees compliance with HACCP, FSMA, and GFSI requirements, and provides leadership to QA and sanitation teams to maintain continuous improvement in quality systems and plant hygiene. Essential Functions Quality Assurance & Compliance Manage and maintain the plant's Quality Management System (QMS) to meet internal, customer, and third-party audit requirements. Oversee daily QA operations including product testing, process verification, and documentation review. Lead and coordinate internal, customer, and regulatory audits (FDA, USDA, State, GFSI). Investigate non-conformances, implement root cause analysis, and ensure timely corrective and preventive actions (CAPAs). Ensure compliance with labeling, allergen control, and traceability requirements. Maintain accurate and complete quality and production records in compliance with regulatory standards. Food Safety & HACCP Serve as the plant's PCQI (Preventive Controls Qualified Individual). Oversee implementation, verification, and validation of food safety programs including HACCP, FSMA Preventive Controls, environmental monitoring, and supplier verification. Lead the Food Safety Team and ensure effective communication of food safety objectives across departments. Monitor trends in microbiological results, environmental swabs, and product testing to proactively identify risks. Leadership & Training Develop and deliver employee training on GMPs, food safety, allergen control, sanitation, and quality awareness. Promote a culture of food safety and continuous improvement throughout the facility. Collaborate cross-functionally with Production, Maintenance, and Sanitation teams to ensure alignment with quality objectives. Continuous Improvement Analyze process data to identify opportunities for quality improvement and waste reduction. Support implementation of initiatives related to product quality and safety. Recommend and validate changes to formulations, processes, or equipment to improve quality performance. Competencies Page Break Problem Solving/Analysis Works independently Dependable Strong Communication Skills Teamwork Innovative Computer Skills Time Management/Initiative Attentive to detail Trainable Page Break Supervisory Responsibility This position will have direct supervisory responsibility for a portion of the Quality Assurance team. Work Environment This job operates in a plant environment and office. While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles, moving mechanical parts and vibration. Exposed to extreme temperature variations. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands for this position are approximately 60% active and 40% sedentary work. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently will need to sit, stand, walk and climb stairs. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 40 pounds. Position Type/Expected Hours of Work This is a full-time position. Typical schedule is Monday through Friday with occasional evening and weekend work possible based on specific project needs. Travel Less than ten percent travel expected for this position. Required Education, Experience & Certifications Bachelor's degree in related field and/or a minimum of 10 years' experience in food manufacturing quality assurance and/or sanitation leadership. Knowledge of food safety regulations including HACCP, GMP, FSMA and SQF. Strong leadership and team management experience. Ability to conduct audits, troubleshoot quality issues and implement improvements. Preferred Education, Experience & Certifications Master's degree in food science. Bilingual in English/Spanish. Preventive Controls Qualified Individual certification. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. Monday - Friday; night or weekends as needed for projects 8:00 am - 5:00 pm

This position is responsible for ensuring the production of safe, high-quality food products in compliance with regulatory, customer, and company standards. This role leads the facility's food safety and quality programs, oversees compliance with HACCP, FSMA, and GFSI requirements, and provides leadership to QA and sanitation teams to maintain continuous improvement in quality systems and plant hygiene. Essential Functions Quality Assurance & Compliance Manage and maintain the plant's Quality Management System (QMS) to meet internal, customer, and third-party audit requirements. Oversee daily QA operations including product testing, process verification, and documentation review. Lead and coordinate internal, customer, and regulatory audits (FDA, USDA, State, GFSI). Investigate non-conformances, implement root cause analysis, and ensure timely corrective and preventive actions (CAPAs). Ensure compliance with labeling, allergen control, and traceability requirements. Maintain accurate and complete quality and production records in compliance with regulatory standards. Food Safety & HACCP Serve as the plant's PCQI (Preventive Controls Qualified Individual). Oversee implementation, verification, and validation of food safety programs including HACCP, FSMA Preventive Controls, environmental monitoring, and supplier verification. Lead the Food Safety Team and ensure effective communication of food safety objectives across departments. Monitor trends in microbiological results, environmental swabs, and product testing to proactively identify risks. Leadership & Training Develop and deliver employee training on GMPs, food safety, allergen control, sanitation, and quality awareness. Promote a culture of food safety and continuous improvement throughout the facility. Collaborate cross-functionally with Production, Maintenance, and Sanitation teams to ensure alignment with quality objectives. Continuous Improvement Analyze process data to identify opportunities for quality improvement and waste reduction. Support implementation of initiatives related to product quality and safety. Recommend and validate changes to formulations, processes, or equipment to improve quality performance. Competencies Page Break Problem Solving/Analysis Works independently Dependable Strong Communication Skills Teamwork Innovative Computer Skills Time Management/Initiative Attentive to detail Trainable Page Break Supervisory Responsibility This position will have direct supervisory responsibility for a portion of the Quality Assurance team. Work Environment This job operates in a plant environment and office. While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles, moving mechanical parts and vibration. Exposed to extreme temperature variations. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands for this position are approximately 60% active and 40% sedentary work. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently will need to sit, stand, walk and climb stairs. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 40 pounds. Position Type/Expected Hours of Work This is a full-time position. Typical schedule is Monday through Friday with occasional evening and weekend work possible based on specific project needs. Travel Less than ten percent travel expected for this position. Required Education, Experience & Certifications Bachelor's degree in related field and/or a minimum of 10 years' experience in food manufacturing quality assurance and/or sanitation leadership. Knowledge of food safety regulations including HACCP, GMP, FSMA and SQF. Strong leadership and team management experience. Ability to conduct audits, troubleshoot quality issues and implement improvements. Preferred Education, Experience & Certifications Master's degree in food science. Bilingual in English/Spanish. Preventive Controls Qualified Individual certification. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. Monday - Friday; night or weekends as needed for projects 8:00 am - 5:00 pm

Directs and supervises QC Technicians and Quality Specialists Develops processes and procedures to ensure we have consistent and repeatable testing methods to ensure the quality expectations of our customers. Upholds all quality expectations of Axalt Manager, Continuous Improvement, Quality, Manufacturing, Management, Skills

Every day, we get opportunities to make a positive impact - on our colleagues, partners, customers and society. Together, we're pioneering the solutions of the future and unlocking the full potential of precious resources. Trusted to act on initiative, we challenge conventional thinking to develop world-leading technologies that inspire progress in vital areas, including energy, food, water and shipping. As we push forward, the innovative, open spirit that fuels our 140-year-old start-up culture and rapid growth also drives our personal growth. So, as we shape a more resourceful, less wasteful world, we build our careers too. About the job Reporting to the Director of Service Operations, the Quality Manager plays a critical role in driving organizational excellence and ensuring consistent delivery of high‐quality goods and services. This position leads departmental quality initiatives, strengthens processes, and oversee continuous improvement efforts across the organization. The Quality Manager is responsible for developing and executing the corporate quality strategy, managing AL Inc.'s quality standards, and guiding the creation, enhancement, and implementation of policies and procedures. In partnership with cross‐functional teams, this role supports the deployment and ongoing optimization of the Quality Management System, ensuring alignment with business objectives, regulatory requirements, and industry best practices. This is a role based in Houston, TX, Greenwood, IN or Richmond, VA. As a part of the team, you will: * Lead the continuous review and improvement of policies, procedures, and systems that support the company's strategic and operational objectives, ensuring the development, implementation, and ongoing enhancement of the AL Inc. Quality Management System. * Drive quality compliance initiatives to maintain adherence to all customer, governmental, and industry requirements, providing leadership and guidance to strengthen organizational readiness. * Oversee timely completion of critical quality documentation, including inspection check sheets, process flow diagrams, management of change forms, process control plans, root cause analysis, customer complaint reports, capability studies, and preventive and corrective actions. * Develop and execute quality assurance procedures in collaboration with process owners, supporting efforts to improve, standardize, and sustain quality across the organization. * Manage the internal quality audit program and coordinate customer and supplier audits to ensure transparency, compliance, and continuous improvement. * Lead or participate in major quality investigations, conduct root cause analyses and drive effective corrective and preventive actions. * Support resolution of potential quality non‐compliance issues, ensuring timely mitigation and alignment with regulatory and customer expectations. * Develop and strengthen management systems with a focus on auditing processes, KPI management, training and competency development, SOP creation, and ongoing improvement activities. * Oversee quality aspects tied to manufacturing processes and products, ensuring full fulfillment of customer requirements and specifications. * Lead and contribute to continuous improvement initiatives, championing methodologies and practices that elevate quality performance and operational efficiency. * Drive projects to obtain and maintain required quality certifications and stamps (e.g., ISO, ASME), ensuring organizational compliance and readiness. * Ensure alignment with corporate standards while adapting quality practices to meet local and regional regulatory requirements. * Provide leadership, coaching, and development to Quality and Project Management teams, fostering competency growth and supporting long‐term career development. * Allocate resources effectively and manage team performance to achieve quality objectives and deliver measurable results. * Cultivate a culture of accountability, collaboration, and continuous improvement, reinforcing quality as a core organizational value. What you know: You have a Bachelor's degree in Engineering, Quality Management, or a related field and: * Minimum of 5 years of experience in Quality, including hands‐on management of ISO‐based quality systems. * A results‐oriented, metric-driven approach, with demonstrated expertise in the chemical industry. * A strong background in leadership, manufacturing processes, and quality systems, with the ability to guide teams and influence outcomes. You also bring: * Skill in influencing cultural change and resolving complex problems across teams and functions. * Demonstrated experience developing, implementing, and improving quality systems, ensuring alignment with organizational and regulatory requirements. * Certification and practical capability in root cause assessment, problem identification, and resolution of inconsistencies. * Solid analytical and computer skills, with the ability to interpret data and drive informed decision‐making. * Experience with TQM or ISO quality management systems, including documentation, auditing, and continuous improvement practices. * Strong leadership and decision‐making abilities, with a track record of championing and leading quality audits. * Excellent interpersonal, verbal, and written communication skills, enabling effective collaboration with stakeholders at all levels. * Black Belt certification, reflecting advanced expertise in process improvement and structured problem‐solving, a plus! * Willingness to travel up to 40% What's in it for you? Alfa Laval offers a competitive salary and full benefits package, including medical/dental/vision/life, 401(k) plan, and more. At Alfa Laval, we carefully consider a wide range of compensation factors to determine your total compensation package. We rely on market indicators to determine compensation and consider your specific job family, background, skills, and experience to get it right. These considerations can cause your compensation to vary and will also be dependent on your location. The base salary for this role is typically $115,000 - $140,000. Alfa Laval is an equal opportunity employer. We are committed to building an inclusive and diverse workforce. All employment is decided on the basis of qualifications, merit, or business need, without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. #LI-DM1 EEO/Vet/Disabled Employer

PRIMARY RESPONSIBILITIES: First point of contact for chassis line issues Maintain and complete assigned QIRP action items Review work and complete tasks assigned in PLM Follow all safety policies, rules and procedures Responsible for production processes and necessary tooling/equipment to produce high quality product with high operator efficiency Provide required personal hand tools KNOWLEDGE, SKILLS AND ABILITIES: Overall knowledge of bus body/chassis construction; departmental tools/equipment Technical ability to work from rough sketches or mark prints Able to adjust quality level to job at hand Knowledgeable of all tools and equipment in department Print reading/comprehension, MS Office, PLM, LN, BBOND, BOSS Ability to weld (tig, arc, mig) in order to fabricate assembly fixtures, tools and jigs Ability to work on several jobs at once EDUCATION AND/OR TRAINING: * See knowledge, skills and abilities WORKING CONDITIONS: Team Worker and able to direct others Communicate with own and other departments (read, write, verbal) Overtime work required as needed Able to do physical work (normal lifting/carrying, bending and climbing) PERFORMANCE CRITERIA: Must meet established quality and maintenance standards Maintain a positive, even-tempered attitude Wear required personal protective equipment (PPE) Must meet established attendance policy and work overtime when required Must perform other duties and tasks as assigned by supervisor

Blue Bird (NASDAQ: BLBD) is recognized as a technology leader and innovator of school buses since its founding in 1927. Our dedicated team members design, engineer and manufacture school buses with a singular focus on safety, reliability, and durability. School buses carry the most precious cargo in the world - 25 million children twice a day - making them the most trusted mode of student transportation. The company is the proven leader in low- and zero-emission school buses with more than 25,000 propane, natural gas, and electric powered buses sold. Blue Bird is transforming the student transportation industry through cleaner energy solutions. For more information on Blue Bird's complete product and service portfolio, visit ****************** JOB SUMMARY The Manufacturing Electrical Engineer supports Production by development and implementation of robust processes for vehicle and equipment programming, error proofing, and other controls within the facility. The Manufacturing Electrical Engineer interfaces with other members of the Engineering, Operations, and extended teams to trouble shoot and implement improvements to correct issues and improve efficiency. ESSENTIAL DUTIES AND RESPONSIBILITIES Assessing project requirements such as technical challenges, engineering hours, risk assessment, etc. Ensure processes are robust to vehicles meet FMVSS, State, and customer requirements Assist in definition of electrical system and component specifications Review electrical designs of equipment and product to ensure they are safe, robust, and efficient Focus on cost reductions and demonstrate ability to control project and verification costs Liaising with suppliers Communicate well with the cross-functional team (Design, IT, Purchasing, Management, etc.) Able to manage a multitude of various projects and strive for on-time resolution of issues or implementation of changes Providing technical advice and troubleshooting of manufacturing issues to resolution Analyzing and interpreting communications and signal data Programming development and validation for Blue Bird vehicle software Development and implementation of robust manufacturing solutions for programming of equipment and product KNOWLEDGE, SKILLS AND ABILITIES FOR SUCCESS Individual needs to be technically minded, able to manage people and projects to completion Experience with several of the following areas of electrical integration is a preference: Electric Vehicles CAN Bus / J1939 data links / Multiplexing / Vehicle Electronic Programming Stations (VEPS) Automotive displays (LCD, Touchscreen, ) Automotive Feature Integration Automotive Wiring /Harnesses Simulink model-based system design PLC programming / hardware and ladder logic, especially Allen Bradley Robotic automation, especially Fanuc BASIC EDUCATION AND EXPERIENCE REQUIRED Bachelor of Science in Electrical Engineering from an accredited university or equivalent combination of experience and education 3 years of manufacturing experience required Automotive or truck environment, preferred * All candidates must be a U.S. citizen or permanent resident WORK CONDITIONS (The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) Office environment and production environment Must work in manufacturing environment with exposure to heat, cold and noise Fast paced production area with moving objects and sheet metal Occasional periods of standing or sitting for extended periods of time Must wear appropriate PPE when and where required Frequent weeks working 40+ hours Frequent communication with people throughout the day The specific statements shown in each section of this description are not intended to be all-inclusive. They represent typical elements and criteria necessary to successfully perform the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Blue Bird is an equal opportunity employer and makes employment decisions on the basis of merit. We strive to have the best available talent in every job based on the Knowledge, Skills and Abilities each person brings. Blue Bird is committed to compliance with all applicable laws providing equal employment opportunities. This commitment applies to all persons involved in Company operations and prohibits unlawful discrimination in all forms. All candidates must be a U.S. citizen or permanent resident. Candidates must be authorized to work in the United States and will be required to provide proof of employment eligibility at the time of hire. #LI-Onsite

The Manufacturing Electrical Engineer supports Production by development and implementation of robust processes for vehicle and equipment programming, error proofing, and other controls within the facility. The Manufacturing Electrical Engineer inter Manufacturing Engineer, Electrical, Manufacturing, Electrical Engineer, Engineer, Vehicle

At Blue Bird (BLBD), we come to work every day with one common goal: to design, build, sell and service North America's finest school bus. That's what we do - no distractions, no competing priorities. Since 1927, we have focused on listening to our customers, embracing their needs, and delivering innovations that lead the market. Today, we are a billion-dollar school bus manufacturer headquartered in Macon, Georgia with manufacturing facilities located just over an hour south of Atlanta, in Fort Valley, Georgia. We are pleased to share that we have a career opportunity for a Manufacturing Engineer as a strategic part of the Blue Bird Production Engineering Team. With a focus on the Three Blue Bird Foundational Objectives: Take Care of Employees: Delight Customers & Dealers: Deliver Profitable Growth. This role will drive functional excellence and continuous improvement. JOB SUMMARY: Reporting to the Manufacturing Engineering Manager, this role is responsible for optimizing production manufacturing processes through developing, planning, and implementing improvements that positively impact safety, quality, labor, and delivery utilizing engineering principles. ESSENTIAL DUTIES AND RESPONSIBILITIES: Production line technical support Provide necessary tooling, routers, labor standards, raw material structure, make vs. buy analysis, process instructions, and technical support for the timely implementation of engineering changes Accountable for achieving goals and objectives for the Mfg Engineering group and Operations organization. Utilize PLM system including reviewing product design changes and assess manufacturing impact Recognize labor impact with process/design changes and implement plans with little impact to Mfg departments. Develop business cases, write AFEs for funding procurement Develop process changes/improvements using SPC, PFMEA, and control plans Utilize root cause analysis methodology to solving manufacturing issues Will be working within an ISO 9000 quality system and produce documentation acceptable to the customer Document and report work activity Document and report work activity. Perform other related duties as assigned KNOWLEDGE, SKILLS AND ABILITIES: Balanced, dynamic, methodical approach; good work ethic, integrity, and professional conduct Must demonstrate positive attitude; foster teamwork; responsive to customer/Mfg issues Effective written and verbal communication skills; administrative and financial skills, excellent problem solver; able to interact with personnel in other organizations. Ability to read and understand Engineering prints/drawings Bus Body and Chassis assembly Program management and launch EDUCATION AND EXPERIENCE: Bachelor's degree in engineering from Accredited University required Minimum 2 years' experience in manufacturing, automotive preferred Past experience in Production Supervision a plus Must possess excellent planning and organization skills Competent user of MS Office products All candidates must be a U.S. citizen or permanent resident WORKING CONDITIONS: Manufacturing environment with exposure to heat, cold and noise Must be able to work with diverse workforce Weekends and travel as required The specific statements shown in each section of this description are not intended to be all-inclusive. They represent typical elements and criteria necessary to successfully perform the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Blue Bird is an equal opportunity employer and makes employment decisions on the basis of merit. We strive to have the best available talent in every job based on the Knowledge, Skills and Abilities each person brings. Blue Bird is committed to compliance with all applicable laws providing equal employment opportunities. This commitment applies to all persons involved in Company operations and prohibits unlawful discrimination in all forms. All candidates must be a U.S. citizen or permanent resident. Candidates must be authorized to work in the United States and will be required to provide proof of employment eligibility at the time of hire. #LI-Onsite

Reporting to the Manufacturing Engineering Manager, this role is responsible for optimizing production manufacturing processes through developing, planning, and implementing improvements that positively impact safety, quality, labor, and delivery uti Manufacturing Engineer, Engineer, Manufacturing, Technical Support

Purpose Accountable for basic operation of the site's quality assurance and control program including but not limited to: assisting and supporting all safety, environmental and quality regulations, product testing and adherence to standards, targets and recipes, maintain relevant equipment and calibrations, and decision-making through basic statistical understanding. Key Responsibilities Perform all work in accordance with safety rules and regulations and participate in facility health & safety activities as assigned Use descriptive statistics to identify non-conforming material to site referenced standards and targets Ensure all relevant quality requirements are consistently met according to the QA manual and plant SOPs Ensure that non-conforming product is appropriately quarantined, identified and segregated according to standard procedures Ensure the communication of non-conformance is clear and concise to required parties. Disposition basic non-conforming product as allowed by site Technical Manager. Record testing and inspection results by inputting into appropriate database or spreadsheets while identifying and responding to test results outside of product standards and targets Verify that all product packaging and appearance standards meet site and client expectations. Generate and analyze reports and charts Monitor and document process parameter changes as assigned Communicate test results and observations to operations and management to maintain process and product conformance Monitor and record consumption and inventory of raw materials (wax, resin, etc.). Verify quality of raw materials as required Support preventive and unscheduled maintenance tasks. Assist in process and product tests/trials. Be pro-active in identifying and performing other tasks to maintain and improve safety, quality and environmental performance Demonstrate adherence to process and product SOPs, JSAs, check sheets and other QMS documentation Provide support to team members when a quality issue arises Demonstrate drive and willingness to advance to higher levels of responsibility Perform in a relief capacity for production coordinator Perform other duties as assigned Models company core values Other duties as assigned Required Qualifications Associate's Degree and two years of experience in laboratory work, quality control, or general manufacturing; or an equivalent combination of training, education, and experience Knowledge of and ability to follow all quality and process standards Demonstrated ability to operate a computer and supporting software, to include spreadsheet and statistical packages Working knowledge of manufacturing equipment and production processes Demonstrated ability to operate sample preparation and testing equipment Knowledge of inventory management Excellent verbal and written communication as well as interpersonal skills Proficient math skills and statistical knowledge, including concepts Demonstrated ability to operate a variety of material handling equipment (both hand tools and electrical/motorized equipment) Ability to climb stairs and lift up to 50 pounds Demonstrated ability to work while wearing a respirator and/or other safety clothing or equipment Preferred Qualifications Associate degree in Forest Products, Engineering, Wood Science or related scientific field preferred Three (3) years composite or engineered wood manufacturing experience About Roseburg Forest Products Founded in 1936, Roseburg Forest Products is a privately held company based in Springfield, Oregon. With a legacy in sustainable forestry and innovative wood products manufacturing, we are a leading North American producer of engineered wood, exterior trim, plywood, lumber, and medium density fiberboard (MDF). Our products shape and support homes, workplaces, and industries, while our timberlands protect forest health for future generations and provide high-quality wood fiber for our integrated operations. At Roseburg, we believe in making lives better from the ground up through the products we create, the relationships we build, and the communities we support. Our team of passionate professionals value safety, integrity, and excellence in all we do. From the mill to the forest to the office, you'll find opportunities to grow and contribute to a company that cares for people, communities, and the environment. Learn more about who we are and what we do at ***************** Benefits at Roseburg Roseburg offers a comprehensive and competitive benefits package to support the health, financial security, and well-being of our team members and their families. Key benefits include: Bonus opportunities based on company and individual performance 401(k) with up to 4% company match and 3% automatic company contribution Vacation starting at 3 weeks and 11 paid holidays per year Company-sponsored medical, dental, and vision insurance Company-paid life, AD&D, and long-term disability insurance options Mental health benefits for the entire family, including 8 free annual sessions per person Wellness programs and incentives, including biometric screenings & wellness challenges Paid time away from work for illness or injury, as well as paid parental bonding time Health Savings Account (HSA) with company contributions and Flexible Spending Account (FSA) options Company match for charitable contributions Education assistance and professional development support Financial and retirement counseling Additional voluntary benefits including pet insurance, student loan refinancing, and exclusive scholarships for child dependents, and more! AN EQUAL OPPORTUNITY EMPLOYER INCLUDING DISABILITY AND VETERANS

Purpose Accountable for basic operation of the site's quality assurance and control program including but not limited to: assisting and supporting all safety, environmental and quality regulations, product testing and adherence to standards, targets and recipes, maintain relevant equipment and calibrations, and decision-making through basic statistical understanding. Key Responsibilities Perform all work in accordance with safety rules and regulations and participate in facility health & safety activities as assigned Use descriptive statistics to identify non-conforming material to site referenced standards and targets Ensure all relevant quality requirements are consistently met according to the QA manual and plant SOPs Ensure that non-conforming product is appropriately quarantined, identified and segregated according to standard procedures Ensure the communication of non-conformance is clear and concise to required parties. Disposition basic non-conforming product as allowed by site Technical Manager. Record testing and inspection results by inputting into appropriate database or spreadsheets while identifying and responding to test results outside of product standards and targets Verify that all product packaging and appearance standards meet site and client expectations. Generate and analyze reports and charts Monitor and document process parameter changes as assigned Communicate test results and observations to operations and management to maintain process and product conformance Monitor and record consumption and inventory of raw materials (wax, resin, etc.). Verify quality of raw materials as required Support preventive and unscheduled maintenance tasks. Assist in process and product tests/trials. Be pro-active in identifying and performing other tasks to maintain and improve safety, quality and environmental performance Demonstrate adherence to process and product SOPs, JSAs, check sheets and other QMS documentation Provide support to team members when a quality issue arises Demonstrate drive and willingness to advance to higher levels of responsibility Perform in a relief capacity for production coordinator Perform other duties as assigned Models company core values Other duties as assigned Required Qualifications Associate's Degree and two years of experience in laboratory work, quality control, or general manufacturing; or an equivalent combination of training, education, and experience Knowledge of and ability to follow all quality and process standards Demonstrated ability to operate a computer and supporting software, to include spreadsheet and statistical packages Working knowledge of manufacturing equipment and production processes Demonstrated ability to operate sample preparation and testing equipment Knowledge of inventory management Excellent verbal and written communication as well as interpersonal skills Proficient math skills and statistical knowledge, including concepts Demonstrated ability to operate a variety of material handling equipment (both hand tools and electrical/motorized equipment) Ability to climb stairs and lift up to 50 pounds Demonstrated ability to work while wearing a respirator and/or other safety clothing or equipment Preferred Qualifications Associate degree in Forest Products, Engineering, Wood Science or related scientific field preferred Three (3) years plywood, composite, or engineered wood manufacturing experience About Roseburg Forest Products Founded in 1936, Roseburg Forest Products is a privately held company based in Springfield, Oregon. With a legacy in sustainable forestry and innovative wood products manufacturing, we are a leading North American producer of engineered wood, exterior trim, plywood, lumber, and medium density fiberboard (MDF). Our products shape and support homes, workplaces, and industries, while our timberlands protect forest health for future generations and provide high-quality wood fiber for our integrated operations. At Roseburg, we believe in making lives better from the ground up through the products we create, the relationships we build, and the communities we support. Our team of passionate professionals value safety, integrity, and excellence in all we do. From the mill to the forest to the office, you'll find opportunities to grow and contribute to a company that cares for people, communities, and the environment. Learn more about who we are and what we do at ***************** Benefits at Roseburg Roseburg offers a comprehensive and competitive benefits package to support the health, financial security, and well-being of our team members and their families. Key benefits include: Bonus opportunities based on company and individual performance 401(k) with up to 4% company match and 3% automatic company contribution Vacation starting at 3 weeks and 11 paid holidays per year Company-sponsored medical, dental, and vision insurance Company-paid life, AD&D, and long-term disability insurance options Mental health benefits for the entire family, including 8 free annual sessions per person Wellness programs and incentives, including biometric screenings & wellness challenges Paid time away from work for illness or injury, as well as paid parental bonding time Health Savings Account (HSA) with company contributions and Flexible Spending Account (FSA) options Company match for charitable contributions Education assistance and professional development support Financial and retirement counseling Additional voluntary benefits including pet insurance, student loan refinancing, and exclusive scholarships for child dependents, and more! AN EQUAL OPPORTUNITY EMPLOYER INCLUDING DISABILITY AND VETERANS

The Bay Area Air District (Air District) is a regional government agency committed to achieving clean air to protect public health and the environment. We regulate industrial facilities and administer outreach and incentive programs to encourage clean air choices across seven counties (Alameda, Contra Costa, Marin, San Francisco, San Mateo, Santa Clara, and Napa) plus portions of Solano and Sonoma. We strive for a diverse, inclusive workplace with pay equity, work-life balance, and opportunities for growth. We are accepting applications for the position of Principal Air Quality Engineer, for three full-time, represented positions: one in the Regulatory Development Division and two in the Engineering Division. The job description below outlines division-specific responsibilities and program focus, as well as qualifications and application details. Regulatory Development Division The Regulatory Development Division works with staff, management, executives, and Board members to develop and modify Air District rules to provide emissions reductions, improve air quality, and protect the climate. The Principal Air Quality Engineer for the Regulatory Development Division will: work closely with professional and technical staff to perform and lead complex program assignments for developing regulations to control air pollutants (including those contributing to climate change and local air quality impacts in overburdened communities) work with the California Air Resources Board, other local air districts, community groups, community members, environmental organizations, regulated industries, and other key stakeholders to reduce harmful air pollutants, especially in communities overburdened by air pollution lead, conduct, and coordinate scientific, economic, and technical research work review and draft regulatory language, develop and implement cost effectiveness and incremental cost effectiveness calculations for a wide variety of sources in an industry with various control options analyze emissions inventories to determine baseline emissions and reduction estimates for rules under development brief Air District executives and present at workshops and board meetings work closely with the Community Engagement Division staff and other Air District divisions to strengthen partnerships with key community stakeholders perform related work as assigned Engineering Division The Engineering Division evaluates permit applications and reviews permit renewals for equipment and operations that emit air pollutants within the Air District's jurisdiction. It provides technical support to other programs and assists businesses, trade associations, agencies, environmental groups, and community members with permitting and compliance issues. The division is responsible for implementing the Air District's Facility Risk Reduction Program to reduce health risks from existing facilities or sources. The position will work on the Air District's Toxic Air Contaminant (TAC) Control Programs, designed to identify, assess, and reduce public exposure to toxic air contaminants. The programs integrate federal, state, and local regulations to: Monitor and evaluate TAC emissions from permitted facilities through annual emissions inventories and health risk assessments Implement the Air Toxics New Source Review (NSR) program, requiring preconstruction review and risk assessment for new or modified TAC sources Operate Facility Risk Reduction Programs, targeting existing facilities to identify, assess, and reduce health risks, especially in communities with disproportionate air quality impacts Engage with community stakeholders and provide transparent access to emissions data and health risk information through annual reports and online tools These efforts have led to significant reductions in health risks from toxic air contaminants across the Bay Area. The Engineering Division also engages in programs and projects including, but not limited to: Dispersion modeling and health risk assessments for toxic emissions Verification of emissions inventories Database development and data management Development of new regulations or amendments of existing regulations Strategic planning of division programs The Principal Air Quality Engineer for the Engineering Division may perform other complex and highly specialized air quality engineering work, including: Processing permit applications for complex facilities Analyzing air emissions and other metadata Evaluating program effectiveness Providing project leadership This role also involves peer review, staff mentoring, and training. The incumbent may lead or contribute to sensitive, high-profile projects and deliver technical presentations to the Board of Directors, public, industry, and partner agencies, and may represent the Air District in multi-agency working groups. Definition Under direction, performs the most complex and highly specialized level of assigned air quality engineering activities and may supervise staff on a project basis or lead project teams; performs related work as assigned. Distinguishing Characteristics Under direction, performs the most complex and highly specialized level of assigned air quality engineering activities and may supervise staff on a project basis or lead project teams; performs related work as assigned. Education & Experience Equivalent to graduation from a four-year college or university with major coursework in environmental, chemical, mechanical or petroleum engineering or a closely related field, and four years of air quality environmental engineering experience. Alternatively, a Master's Degree with the same focus and four years of experience. Other Requirements Must possess a valid California driver's license and a valid California Professional Engineer license. How to Apply & Selection Criteria How to Apply Interested individuals must submit a completed Air District application and responses to the supplemental questionnaire by 5:00 p.m. on Monday, November 3, 2025. Resumes are encouraged but not mandatory and will not be accepted in lieu of the required application materials. Applications are accepted online; please visit our website at ******************* to apply. Postmarks, faxes, and e-mailed applications will not be accepted. Except as requested, do not include additional documents. They will not be considered. Supplemental Questions Instructions Applicants must respond to each required supplemental question. Limit responses to no more than one page (500 words) per question. Do not reference your resume or other documents. This information will be evaluated to determine the most directly related experience, education, and training. Selection Criteria Selection may be based on a competitive exam (written, interview, or both). Depending on applicant volume, an application screening and/or panel interview may be used. The Air District may hire from this process to fill future vacancies for 18 months. Persons with disabilities who may require accommodations should notify the Human Resources Office. The Air District is an Equal Opportunity Employer. #J-18808-Ljbffr

Your Organization Manufacturing Engineer Altec AIR New York manufactures large desiccant dryers for a variety of applications, including oil and gas, industrial compressed air, and process control to name a few. We are a small and dynamic team located outside of Buffalo, NY, about a half hour drive from Niagara Falls. Altec AIR has developed a multi-functional role here at Altec's Lancaster, NY, facility, reporting to the Sr. Staff Engineer. We are a relatively small operation with no formal compartmentalizing of engineering roles. * Bachelor's degree from an accredited university in Engineering , Mechanical, Industrial, Manufacturing, Electrical engineering or Aerospace * Minimum one year experience required, two years preferred Salary range: $77,00 - $91,500 (wage may be adjusted commensurate upon work experience). The job level may be adjusted at the time of hire should the selected candidate meet the qualifications of a more experienced job in the career path Job posting open until 2/7/26 The demands on our engineering team change day-to-day as we strive to achieve total customer satisfaction. The qualified candidate will lead us forward as we focus on improving Manufacturing and Quality processes. This role will emphasize traditional Manufacturing and Quality engineering duties, while at times and to varying degrees require basic product design skills. Manufacturing Engineering (40%) Work with Plant Manager and production associates to identify areas for improvement, such as cell layout, designing tools and fixtures, workflow, inventory reduction, component cost and labor reduction, etc. Plan and lead RCI events Learn and effectively manage the Altec AIR ERP System, with respect to engineering responsibilities (part creation, BOMs, routings, etc.) Quality Engineering (40%) Work with Altec Corporate Quality to identify opportunities for improving Altec AIR's Quality Audit score Develop Supplier and Production Quality Systems Provide engineering support to outside sales and service Assist Tech Support in troubleshooting compressed air systems in the field and in production Identify and resolve product support and other quality issues by facilitating changes to the design or manufacture of our products Identify warranty and production top drivers, perform root cause analysis, and implement corrective actions Product Design/New Product Development (20%) The required design skills for this role do not demand a Mechanical Engineering degree, but the qualified candidate will be able to perform basic product design tasks, such as: Design and specification of sheet metal components Understanding of basic electrical circuits (volts, amps, and power consumption) and pneumatic systems Participate on Altec AIR's PCP teams to develop new products within scope, manufacturability, serviceability, and efficiency Create and update engineering drawings according to Altec AIR's Engineering standards In addition to the bachelor's degree and experience, Altec Manufacturing and/or Quality experience preferred Can confidently and independently work with domestic and international suppliers to identify and improve top drivers of Quality, Cost, Delivery, Safety Knowledge of Solid works: Part, assembly and drawing creation, configurations, sheet metal modeling Understanding of pneumatic systems with confidence to develop skill in troubleshooting Academic exposure to psychrometrics is preferred (measurement of gas-vapor mixtures), ability and willingness to learn and apply it required Please apply online at jobs.altec.com Comprehensive benefits including Medical, Dental and Prescription Drug Program - Retirement 401(k) Program - Vacation and Holidays - Flexible Spending Accounts - Tuition Assistance Program - Employee Assistance and Mental Health/Substance Abuse Program - Life Insurance, Accidental Death and Dismemberment Insurance Altec Industries, Inc. and its affiliates are equal opportunity employers and maintain affirmative action plans to recruit, retain, develop, and promote qualified individuals without unlawful consideration of race, gender, color, religion, sexual orientation, gender identity, national origin, age, disability, citizenship status, veteran status, or any other characteristic protected by federal, state or local law. Altec strives to maintain a work environment free from unlawful discrimination and harassment, where associates are treated with respect and dignity.

Before applying for this job, please read description in its entirety and if you are qualified and interested, follow the directions below on how to apply. This position is located in Roseville, CA. No relocation package is provided for non-local candidates. Harris & Bruno International is looking for a Manufacturing Engineer to work in a high pace manufacturing environment. This individual will be expected to: Carry out process improvement, problem resolution, project management and employee training. Improve manufacturing processes and methods for cost reduction, quality improvement and efficiency. Prepare and present plans and coordinate deployment including training of team. Designs, develops, and tests and/or sources and cost-justify various tools, machinery and equipment for recommended manufacturing methods. Assist in improving production control, standard operating procedures, safety, quality control and training. Perform research, design, and development of manufacturing processes including production flow, assembly methods and production equipment. Prepare and maintain detailed layouts of building and equipment. Coordinate the manufacturing launch of new/revised products including establishing goals, training team members and evaluating results. Perform product/process analysis for cost reduction, quality improvement, and improved efficiency. Represent manufacturing on cross functional teams. Maintain product and company reputation by complying with government regulations. Benefits Package Includes: Medical Dental Voluntary Vision Company provided life insurance with the option of additional voluntary life insurance. 401k with employer match. Robust PTO policy beginning with 3 weeks earned the first year. Paid holidays. Knowledge/Skills: Technical Capacity. Proficient at problem solving and analysis. Leadership. Communication proficiency. Education/Experience: Bachelor degree in Engineering required. 3 or more years' experience as a Manufacturing Engineer. Experience with 3-D Modeling Harris & Bruno International is a stable company that has been in business since 1948. We are experiencing regular, steady growth in our core and developing product lines. We enjoy a strong presence in the rapidly expanding commercial printing market supporting customers who package products that you use every day.

Designs manufacturing processes, procedures and production layouts for CCA and module assemblies. Cable harness experience and process writing are a plus. Interprets engineering prints to design processes and works with design engineering to implement production improvements. Supports the production floor by working with the operations team and focusing on continuous improvement. Designs, procures, and implements tooling to support manufacturing processes. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations and specifications. Supports the production floor by working with the operations team. Designs manufacturing processes and production layout for circuit card assemblies and subassemblies. Understands how the circuit card process works. Cable harness experience is a plus.

About Balt Our purpose is to improve the lives of 150,000 patients in 2026. Our story Balt is a rapidly growing pioneer in an exceptional field. For 45 years, Balt has been leading the way - collaborating with physicians and institutions to develop elegant medical devices. Our products are being used by physicians across the world, and we have 13 offices in 11 countries - and counting. We introduced one of the first neurovascular intervention devices in 1977 and now offer the world's broadest portfolio of medical devices for stroke. As the premier global neurovascular platform always seeking to expand beyond boundaries, we are now bringing our innovation to the peripheral vascular space. We are proud of our mission, our people, and the incredible work we accomplish together as we empower physicians to save lives. Why Join Balt? Join a passionate team, dedicated to making a difference. Working at Balt means giving meaning to your work! Pride is a strong part of our identity. We are a close-knit team, with strong mission, vision and values that guide our day-to-day. Recognition of work, respect, and our multicultural community are key aspects of the employee experience and contribute to our continued success. No matter the country, we take care of you. Would you like to be part of our story? Don't hesitate, come and join us! About this opportunity - Quality Engineer II Description The Operations Quality Engineer II will be responsible for supporting production quality, the transfer of neurovascular products to the production environment, and supplier quality activities. This engineer will be expected to work directly with production and suppliers while being provided moderate levels of support/guidance from other engineers and their manager to complete tasks. This position will have the responsibility to support and continuously improve current manufacturing and supplier quality processes through technical and process innovation for the manufacture of neurovascular medical devices that save patient lives. Job Responsibilities Daily tasks: Production support of existing products/processes and sustaining work Support the manufacturing organization to facilitate efficient operations, optimize existing processes, and ensure that production goals are met. Develop process and procedure updates for increased efficiency, quality, and productivity. Work with Manufacturing Engineering to correct equipment problems or process parameters that produce non-conforming products, low yields, or product quality issues. Analyzes nonconforming product, process, and material issues supported by use of root cause tools to drive corrective actions. Own NCMR and CAPA investigations and corrections/corrective actions Support requests for new supplier onboarding and offboarding Complete tasks related to supplier changes and management of existing suppliers Spend significant portions of time in the production environment. Work closely with production operators and Quality Control inspectors in the production environment. Provide feedback to Quality, Operations, Engineering and R&D on quality issues. Detail oriented review and approval documentation in support of production and process improvement Additional Tasks: Development project work - design transfer, commercialization of new products, and site manufacturing transfers Interface with New Product Development team in design control projects to integrate new products or processes into the existing manufacturing area. Process development, validation and verification work is required - knowledge of Process Validation Plans, IQ, OQ, PQ, software validation, test method validation/gage R&R, a clear understanding of FDA's QMSR and cGMP, and a good understanding in the application of statistics to process analysis and improvement. Communicate with suppliers to address quality concerns and resolves issues. Maintain and develop processes and procedures by writing standard work instructions for operations involved with production and quality. Qualification Requirements Bachelor's degreerequired, preferably in engineering or science discipline. 2+ years as an Engineer in a related field. Medical device or pharmaceutical experience. Process and Equipment qualification knowledge. Statistical analysis skill set. Highly Desired Qualifications Class II and III implantable medical device experience with focus on neurovascular devices. Experience creating and implementing new production line layouts. Minitab proficiency. Strong background in medical device components using metals, plastics, extrusion, and/or adhesives. A demonstrated ability to plan and run projects. Skills Required: Keen attention to detail when reviewing documentation and processes. Solid technical writing ability Comfortable working independently and cross-functionally as part of a team. Comfortable communicating with a wide range of people (production, regulatory, management, suppliers, and others) General understanding of Risk Management, including design, use, and process FMEAs as well as a basic understanding of Severity, Occurrence, and Risk Mitigation and their impact on product/process controls. General understanding of Process Validation (OQ/PQ) and ability to develop test protocols/report to meet FDA and ISO requirements for class II and class III devices. General understanding of CAPA process and root cause analysis tools and how to use them Ability to develop/draft manufacturing documentation (Manufacturing Procedures, Engineering Drawings, BOM, Work Orders). General familiarity with design control requirements and V&V testing for new product designs. Effectiveness with lab equipment, assembly tools, and measurement devices. Basic understanding of statistical analysis techniques for identifying process capability and equivalence testing. Development and qualification of tooling/ equipment (IQ/OQ, support, design). Knowledge of computer applications (i.e.: Microsoft Project, Word, Excel, PowerPoint, Windows, Visio, etc.) required. Highly Desired Qualifications: Experience with catheters, coils, or stents device manufacturing processes and equipment. Test Method Validation and/or Measurement System Analysis experience, including Gage R&Rs and Attribute Agreement analysis Process background (development, capability, optimization, validation) within the medical device industry. Equipment and tooling design and optimization using DFM and Six Sigma principles. Leading project teams tasked with new product/process development and the successful transfer into manufacturing. Knowledge to develop and improve manufacturing processes from concept to commercialization including characterization, validation and cost/capacity analysis. Application of statistical and analytical methods for process development, optimization and control such as SPC, SQC, and DOE. Knowledge of SolidWorks for both part and fixturing/equipment design. Work Environment Working conditions are normal for an office environment. Extended computer usage. Standard PPE gowning requirement for cleanroom activities is required. Moderate lifting Extended periods of walking or standing Microscope usage The above information on this description have been designed to indicate the general nature of work performed by employees within this position. It is not a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Balt Group is an Equal Employment Opportunity employer. More information please go to ***************** Please be aware of a current job offer scam perpetrated through the use of the internet. The scammers frequently misappropriate and use a company's log and photos to give the appearance of legitimacy. The scam preys upon those seeking employment and uses false and fraudulent offers of employment with employers, such as Balt Inc to steal from the victims. Balt believes that one of the best ways to put a stop to this scam is to make sure you are aware of it. Balt's job recruitment process involves live communication: in person, telephone, and/or video interviews in most cases. #LI-FW1 Pay Range $85,000-$95,000 USD

We are seeking a highly motivated Process Engineer to lead and support our assembly operations with a strong focus on process optimization, automation, and Lean manufacturing. The ideal candidate will play a critical role in driving operational excellence, improving assembly line performance, and leading continuous improvement initiatives to enhance safety, quality, delivery, and cost. Responsibilities Develop and optimize assembly processes, ensuring alignment with quality, productivity, and cost targets. Identify and implement automation opportunities (robotics, vision systems, material handling, etc.) to increase efficiency and reduce manual labor. Collaborate with cross-functional teams including design, quality, maintenance, and operations to launch new products and processes into production. Facilitate continuous improvement initiatives using Lean tools such as Kaizen, 5S, Standard Work, SMED, Value Stream Mapping, and Root Cause Analysis. Analyze and resolve process issues through structured problem-solving (e.g., DMAIC, 8D, PDCA). Develop and maintain process documentation, including work instructions, process flow diagrams, PFMEAs, and control plans. Monitor KPIs such as cycle time, OEE, scrap, and downtime; identify trends and take corrective actions. Champion Lean culture within the organization by training, mentoring, and engaging team members at all levels. Evaluate new equipment and technologies; develop business cases and support capital projects from concept through implementation. Ensure compliance with safety, quality, and environmental standards in all process engineering activities. Qualifications Bachelor's degree in Mechanical, Industrial, or Manufacturing Engineering or related field. 2+ years of experience in process or manufacturing engineering, preferably in a high-volume assembly environment. Knowledge of assembly tooling, fixtures, and workstations. Proficiency in using engineering tools such as AutoCAD/SolidWorks, Excel (advanced), and statistical analysis software (e.g., Minitab).

WARNING about fake job posting scams. There has been a recent wave of scams whereby third parties post fake job openings using a bogus email address that resembles ****************. Under the guise of asking you to fill out an application, the scammers are attempting to gather your personal information. See the Federal Trade Commission's warning on this topic at: ******************************************* The only official source for actual Biolinq job postings/openings is at *********************** . While other job sites (such as LinkedIn, Indeed or Glassdoor) may pull from Biolinq's careers web page, you should visit *********************** to verify the accuracy of the openings found on third party web sites. About the Company Biolinq is a venture-backed digital health company developing a wearable biosensor platform that measures biomarkers important to the management of many clinical conditions including diabetes. This dynamic role is a part of a team of engineers and scientists developing a novel intradermal biosensor technology and the associated software data extraction and rendering SDK that will transform the way people manage their metabolic health. Job Purpose Responsible for activities and area goals through qualification, deployment, and sustaining at the component and finished product level. Duties and Responsibilities Support production monitoring with in-process test execution and trending. Define appropriate alert and action limits based on process performance. Maintain effectiveness of manual test methods through training and certification process. Assess equipment and process for ergonomics and safety. Partner with appropriate vendors to design tooling for production fixturing. Identify system-process interactions using standard tools (p-diagram, SIPOC, VSM). Design or modify existing equipment and fixtures for usability and robustness in manufacturing. Maintain equipment related documentation (manuals, drawings, specifications). Complete line replication and re-qualification activities to support demand, including at key suppliers. Maintain risk documentation (PFMEA) for new failure modes and mitigations. Coordinate with Planning to manage build schedule and material allocation per demand. Provide guidance and training to operators on engineering and V&V builds, as needed. Confirm team comprehension of builds requests, redlines, and special instructions. Develop sustaining cost model for lab supplies, consumables, fixtures, and spare parts. Collect time measurements and process videos to baseline headcount needs. Provide voice of manufacturing to ensure successful transfer from R&D to production. Remediate build documentation for clarity and standardization. Develop hands-on training materials for critical processes and equipment (pipetting, etc.). Develop job aids and other guidance documents to support process adherence. Provide technical training to operators for assigned equipment and processes. Identify and implement mistake-proofing opportunities. Participate in daily meetings to review build plan, metrics, and escalations needing support. Complete standard work activities to monitor production status and identify gaps. Complete periodic work (equipment setup, test verification, etc.) to support build plan. Maintain equipment status (preventative maintenance, corrective maintenance, spare parts) to minimize line disruption (OEE); Revise schedule and activities as appropriate based on history and risk. Monitor and replenish inventory levels of production materials, fixtures, and supplies. Submit purchase requisitions for items required by manufacturing and engineering projects. Support 5S adherence in manufacturing by completing routine audits and identified actions. Resolve technical or logistics issues impacting build delivery. Complete root cause investigation and actions for non-conformances (NCMR, CAPA, SCAR). Monitor production performance through control charting, reject pareto, and review of process capability (SPC). Maintain up-to-date model data (manual time, auto time, cost) for assigned processes. Share performance trends, insights, and strategic insights with cross-functional team for alignment. Develop data collection and integration processes for visibility to production status. Support facility expansion, site transfer, and capacity planning activities. Optimize processes for quality, efficiency, and process repeatability at the lowest cost. Complete standardized work and line balancing activities to optimize production output. Utilize problem solving techniques to identify root causes to technical issues (rejects, equipment availability, etc.) and implement sustainable countermeasures to address them. Investigate device observations and field complaints related to manufacturing process. Collaborate with R&D, Supply Chain, and Quality to drive actions, priorities, and trade-offs required to meet targeted COGS. Complete change impact assessment to align implementation plan for proposed changes. Evaluate and implement 2nd source vendors for manufacturing supply risk. Define appropriate lot size and packaging format for raw materials to scale with demand. Integrate external and internal processes to optimize end-to-end supply chain. Transfer peripheral processes and subassemblies to contract manufacturing sites. Manage manufacturing activities and project execution with external vendors. Support communication, collaboration, and strategic relationship with key suppliers. Develop business processes, infrastructure, and tools to improve manufacturing execution. Requirements Qualifications BS Degree in Mechanical Engineering, Bioengineering, Chemical Engineering, Manufacturing Engineering, or scientific discipline required Minimum 8-12 years related experience, including years of higher-level education (MS, PhD) Experience in design of experiments and statistical tools (ANOVA, t-test, etc.) Experience with Fishbone, A3, 5Y, and other root cause investigation tools Strong understanding of process interactions (inputs, outputs) that are both technical and system related Expertise with scaling manufacturing processes to commercial volumes Experience with budgeting, cost management, modeling, and preparing business proposals (ROI, NPV) for new initiatives seeking executive approval Strong understanding of FDA 21 CFR Part 820 and ISO 13485 quality and regulatory standards Experience with lean manufacturing and six sigma methodologies (preferred) Experience with design for manufacturability concepts and product development lifecycle (preferred) Experience with standard electrical, mechanical, and wet lab test equipment (preferred) Strong leadership skills, including the ability to set goals, allocate resources to appropriate priorities, and provide constructive feedback to foster positive relationships Proficiency in Microsoft Office tools Proficiency with JMP, Minitab, or equivalent statistical software Experience with ERP, MES, and other manufacturing systems Proficiency in BMRAM or equivalent asset management system Expertise in several specialty skillset, including injection molding, welding, analytical chemistry, microscopy, metrology, adhesives, or electronics packaging Proficiency in Solidworks or equivalent CAD software (preferred) Experience with MS Project, Visio, and other project management tools (preferred) Experience with manufacturing database, controls, and vision (preferred) Experience with Altium or other electronics design software (preferred) Role model for what kindness looks like. Actively levels up those on the team through example setting, guidance, and support. Empowers others to make effective decisions Excels at identifying solutions to accelerate team's learning of the problem space Strong organizational planning and ability to hold others accountable. Breaks down silos within and across teams to ensure forward progress and collective success Ability to take decisive action and deliver tangible results in a cross-functional organization. Leadership aptitude of teams, projects, and programs Working Conditions General Office, Laboratory, and Cleanroom environments Expected travel less than 10% Physical Requirements While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, see, talk or hear in a standard office environment. Employee may occasionally lift/or move up to 15 pounds. BENEFITS Medical, dental, vision, health savings account, flexible spending account, life and long-term disability insurance, 401(k) plan, holidays, and PTO. At Biolinq we fully subscribe to the principles of Equal Employment Opportunity. It is our policy to provide employment, compensation, and other benefits related to employment based on qualifications, without regard to race, color, religion, national origin, age, sex, veteran status, genetic information, disability, or any other basis prohibited by federal, state or local law. In accordance with requirements of the Americans with Disabilities Act and applicable federal, state and/or local laws, it is our policy to provide reasonable accommodation upon request during the application process to applicants in order that they may be given a full and fair opportunity to be considered for employment. As an Equal Opportunity Employer, we intend to comply fully with applicable federal, state and/or local employment laws and the information requested on this application will only be used for purposes consistent with those laws. To the extent required by applicable law, The Company maintains a smoke- free workplace. As part of our efforts to ensure fair and equal pay based on merit, Biolinq supports pay transparency internally and during the recruitment process. The U.S. base salary range reasonably expected to be paid for this role is: $125,000 to $145,000. We may ultimately pay more or less than the posted range. Actual compensation packages are based on a variety of factors that are unique to each candidate including, but not limited to: skill set, depth of experience, education, certifications, and specific work location. The range displayed reflects the minimum and maximum target for new hire salaries for the job across the U.S. The total compensation package for this position may also include an annual performance bonus and/or other applicable incentive compensation plans. Biolinq also offers a comprehensive package of benefits including paid time off (vacation, holidays, sick time, parental leave), medical/dental/vision insurance, and 401(k) to eligible employees, subject to the terms and conditions of the applicable plans and any written agreement between the parties. Your recruiter can share more about the total compensation package during the hiring process. Please note: The information contained herein is not intended to be an all-inclusive list of duties and responsibilities of the job, nor are they intended to be an all-inclusive list of the skills and abilities required to do the job. Management may, at its discretion, assign or reassign duties and responsibilities to this job at any time. The duties and responsibilities in this job description may be subject to change at any time due to reasonable accommodation or other reasons. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, or protected veteran status and will not be discriminated against on the basis of disability. If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact Biolinq Talent Acquisition at ******************* Salary Description $125,000-$145,000 per year

Avo Photonics is a dynamic contract engineering services company that designs, develops and manufactures custom opto-electronic products for a large customer base. Members of our staff have the opportunity to design, prototype and produce next generation products for a diverse range of markets including environmental, medical, military, industrial, aerospace, and communications. We seek a diligent, dedicated and meticulous person who will help to further our success and reputation in the industry through world-class customer service. The successful candidate must plan his/her own work schedule, keep multiple records, be self-motivated, maintain a professional presence, and have the desire to take ownership of projects. This role may be suitable for a junior or senior engineer. Specific: Develop high yield, cost efficient, manufacturable processes as appropriate for target production volumes Act as end-to-end owner of key equipment such as die bonders, wire bonders, seam sealers, laser welders, etc Provide subject matter expertise for process development on equipment you own. Understand tool capability, process viability, and material selection Own maintenance, upgrade, and repair of equipment you own. Ensure minimal production downtime through regular preventative maintenance. Understand the function of the tools inside and out, in order to resolve issues as quickly as possible Provide data-based evidence that developed processes meet product requirements through design of experiments and statistical process control (within material availability) Generate documentation of the process development lifecycle for each project; contribute to business knowledge repositories for fixtures, materials, and process parameters Create work instructions and provide training on resultant processes to Product Engineering and Manufacturing personnel Guide the design of fixtures required to assemble products Recommend and implement new equipment and techniques to improve process capabilities Requirements: B.S. in Physics, Material Science, or relevant Engineering field 5 years experience with precision optical alignments or programming automated manufacturing equipment 5 years of experience in design of experiments and statistical process control. 3 years of manufacturing experience Proficiency with software-based logic, such as programming, Matlab, etc. Excellent communication skills and willingness to learn Avo Photonics offers competitive salaries and a comprehensive benefits package. Equal Opportunity Employer: Avo Photonics is not accepting unsolicited assistance from search firms for this employment opportunity. All resumes submitted by search firms to any employee of Avo Photonics by any method without a valid written contract in place with Avo Photonics will be deemed the sole property of Avo Photonics. No fee will be paid in the event the candidate is hired by Avo Photonics as a result of the referral or through any other means.