Process Control Technician jobs at GE Appliances - 2363 jobs

TITLE: PLATING PROCESS TECHNICIAN FLSA STATUS: NON-EXEMPT A SHIFT: MONDAY THRU WEDNESDAY AND EVERY OTHER THURSDAY 6:00 AM TO 6:00 PM REPORTS TO: DIRECTOR, PLATING PROCESS ENGINEERING Under the direction of the Director of Plating Process Engineering, the Plating Process Technician provides support to the engineering teams in the plating area, including assisting with wet etch process, preparing and maintaining recipes, reviewing and documenting process or procedures, and expediting and dispositioning prototype wafers; maintains process controls using Statistical Process Control (SPC), collects and analyzes data, and recommends corrective action. This position is located in Milpitas, California. ESSENTIAL FUNCTIONS: Provides support to the engineering teams in the plating, wet etch, and stripping process areas Supports the plating, wet etch, and stripping processes by preparing, maintaining, and setting up recipes to ensure an efficient and consistent process Reviews and documents processes and procedures; partners with engineering to implement changes effectively Expedites and dispositions prototype wafers in the plating, wet etch and stripping areas Assists engineers to run plating process development experiments, collects and analyzes data, and recommends corrective action if required Reviews and maintains process controls using SPC and prepares charts and graphs Assists with routine trouble-shooting and resolves basic process-related issues Participates in and recommends modifications to procedures or processes in support of continuous improvement initiatives Collaborates with Engineering to qualify or approve new processes or procedures Creates reports, charts, or graphs on an ad-hoc or routine basis Prepares daily pass down report for engineers, next shift plating process technicians, and manufacturing plating technicians Responds to inquiries from other team members, managers, or departments Adheres to all safety policies and procedures as required Performs other duties of a similar nature or level* MINIMUM QUALIFICATIONS: Associates degree in Electronics or Industrial Technology and/or equivalent relevant experience Two years of experience working in the semiconductor industry Knowledge of plating, wet processes and procedures Hands on experience using metrology tools such as pH meter, Tencor Thickness Profiler, XRF, and B-H loop tools Proficient in the use of Microsoft Office Applications Required Knowledge, Skills, and Abilities: Knowledge of semiconductor or hard disk drive (HDD) principles and processes Knowledge and ability to use SPC to maintain process controls Knowledge of plating, wet processes and procedures Ability to collect and analyze data, present findings, and recommend corrective action Ability to adhere to all safety policies and procedures Ability to communicate effectively with all levels of employees and management Demonstrated ability to follow routine verbal or written instructions Demonstrated problem solving and organizational skills Demonstrated time management and prioritization skills Skilled at resolving issues quickly and efficiently Flexible and able to prioritize The hourly rate for this full-time position is between $25.00-$40.00 + bonus target + benefits. Within the range the individual pay may differ depending on additional factors including job responsibilities, job related knowledge, skills, abilities, education, and experience. The hourly pay range shown is subject to change and may be modified periodically. WORKING CONDITIONS: The Plating Process Technician works primarily in an indoor environment on A shift which is Monday thru Wednesday and every other Thursday 6:00 AM to 6:00 PM. The schedule may be altered from time-to-time to meet business or operational needs; may travel from building-to-building as needed. Works in a class 100 ESD sensitive wafer manufacturing facility; wears a cleanroom (bunny) suit, including hood, gloves, safety glasses, booties, and mask. May be exposed to hazardous conditions, chemicals, fumes, and/or gases during the course of work day; Stands and walks; performs various fine grasping movements, bends, and twists; operates a computer and enters information using a keyboard, operates a telephone, and other office equipment. Must be able to load and unload various wet etch chemical solutions several times per shift. May be required to push, pull, or lift up to 25 pounds. *Other duties of a similar nature or level are duties that may be required, but may not be specifically listed in the job description or posting. TDK/Headway Technologies, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability, or genetics. Applicants requiring accommodation in order to complete the application process should contact the Headway Human Resources Department.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties/Responsibilities: Performs expert level break-fix & preventive maintenance, and/or design of mechanical, and electrical equipment improvements as well as complex systems as the employees job specialty requires. Provides troubleshooting support on equipment and technical support on production lines as appropriate for the employees job specialty. Maintains in-depth technical knowledge of numerous systems as the employees job specialty requires. Performs research and procedures as the employees job specialty requires. Programs, troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. Utilizes predictive equipment and interprets results for analysis, equipment condition assessment, troubleshooting and proactive maintenance. Including but not limited to infrared thermography, ultrasonic testing, power quality analysis, laser interferometry, ball bar, and vibration analysis. Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology. Identifies and sources parts, supplies and repair items as necessary. Suggests alternative items and engineered solutions to improve reliability. Independently performs maintenance as per industry standards. Complies with 5S and housekeeping standards. May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. Studies and investigates technical and systems methods, tools, and innovations that can be implemented in ATS sites to improve maintenance practices and updates documentation. Prepares input for cost analysis for new equipment, repair/rebuild proposals, cost savings and innovations as required. Updates records and reviews CMMS history and analyzes data. Provides technical contents of sales quotations and performs T&M duties as required. Trains and coaches less proficient technician. Assumes project manager responsibilities as assigned. Completes and conducts on-the-job training and technical self-study programs for career development. Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: High School Graduate or equivalent (GED). Associates degree with a Technical focus and 7 years of related experience in specific industry; or, 10 years of experience in specific industry. Proficiency in predictive technologies including vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment. Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. Must be able to use hand tools and specialized tools as appropriate. May be required to travel. Six Sigma experience desired. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $36.78$47.03 USDATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religin, sexo (incluido el embarazo, identidad de gnero y orientacin sexual), origen nacional, discapacidad, estatus de veterano, informacin gentica u otro estatus legalmente protegido. Revisin de la poltica de privacidad aqu here.

We are seeking a skilled Automation Technician to join our team. This is a challenging and rewarding position that offers opportunities for growth and development. If you are a motivated individual with a passion for automation technology, we encourage you to apply for this position. Join our team and contribute to the success of our organization. SUMMARY: Support operations in the design, build, implementation, and maintenance of custom-built equipment and processes under the direction of the Manufacturing Engineer, mainly utilizing Automation Direct's PLC and software. Develop innovative and creative approaches for improvement in safety, quality, and productivity in processes and equipment. Occasional travel may be necessary. ESSENTIAL FUNCTIONS: Must be capable of following and meeting standard work requirements. Must be able to use computer programs to assist in recording data, making labels, obtaining prints and specifications, etc. Lead projects to improve equipment within the facility. Be able to continue to pursue future designs that will help Parker HPD move forward in leading-edge technology Troubleshoot equipment or PLC issues. Able to foster professionalism with all associates in order to obtain feedback and ideas to incorporate into improvements for the facility. Aide in the development of apprentices. DEPARTMENT SPECIFIC FUNCTIONS: Specify and order any materials required to create any approved project and document the final designs. This documentation must include items such as: blueprints, bill of materials, preventative maintenance standard work, etc. as required for continued support of the equipment Develop a spare parts stock strategy to organize and correctly account for that inventory and usage Develop safety practices that improve working conditions on equipment as needed and beyond OEM standards to ensure a safe Parker work environment in HPD plants Schedule equipment repairs or implementation with production control department. Other duties may be assigned at a later time Work safely in accordance with regulations, standards, and procedures in a manner that eliminates risk to health and the environment. Notify leadership of unsafe conditions or practices unlawful activities and activities that present unreasonable health and/or environmental risk. Report all safety and/or environmental incidents to leadership immediately. Participate in peer-based teams (i.e., Cross Functional Teams), and work with groups to initiate and implement programs such as Lean Manufacturing, 5S, and Total Productive Maintenance. QUALIFICATIONS: Education: High School diploma or GED Certified electrician preferred 2 years of trade school education preferred Desired 4 years of trade school education or certificate Experience: 5 years in a Manufacturing Environment Required Skills Good verbal and interpersonal communication skills Good math, reading and writing skills Proficient with Microsoft Office. Experience with Automation Direct's Productivity Suite Capable of wiring PLC and related components. Have working knowledge and understanding of pneumatic systems, hydraulic systems, and electrical equipment (systems up to 480 volts). Creative and out of the box thinker to visualize and construct equipment and/or make modifications that will improve safety and productivity for our processes and people. Preferred Skills 1. Experience with Codesys programming software. 2. Capable of writing training instructions, Standard Work instructions, and repair records. 3. Have working knowledge of the maintenance and functionality of various types of manufacturing equipment. 4. Have working knowledge and understanding of pneumatic systems, hydraulic systems, electrical equipment (systems up to 480 volts). 5. Strong programming knowledge in PLC's and HMI's. ORGANIZATIONAL RELATIONSHIPS/ SCOPE: Report directly to Manufacturing Engineer Work closely with other departments to resolve issues with the processes & equipment. Communicate with incoming shift of issues and needs. WORKING CONDITIONS: Work in areas where safety equipment will be required (steel toe shoes, eye protection, hearing protection) Standing is required for extended periods of time. Walking, pushing, pulling, reaching, bending, turning, twisting, squatting, and lifting is performed regularly Air-conditioned facility The employee may be required to follow other job-related instructions and to perform other job-related duties as requested, subject to all applicable state and federal laws. DISCLAIMER: The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of employees assigned to this position. EQUAL EMPLOYMENT OPPORTUNITY: Parker is an Equal Opportunity and Affirmative Action Employer, committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency, or other appropriate status is required for certain positions, in accord with U.S. import & export regulations. DRUG-FREE WORKPLACE: In accordance with Parker's policies and applicable state laws, Parker provides for a drug-free workplace. Therefore, all applicants seeking employment with Parker will be subject to drug testing as a condition of employment.

For our state-of-the art 600+ person Lubbock, TX cheese and whey manufacturing facility, Leprino is seeking a Controls Technician. Leprino Foods broke ground on the $1 billion facility in the summer of 2022. The plant will become operational in 2025 with Phase 1 and will become fully operational by 2026! This position pays $39 per hour. There is an additional $1 differential for hours worked between 6pm and 6am. Weekly pay. Summary Description: The Industrial Electrical/Controls Technician provides plant-wide support for the selection, installation, programming, documentation, training and knowledge of plant industrial controls, including computer integration of PLC's, HMI's and process controls within the facility, training of end users on the operations of newly installed or modified process or control systems, and for standardization of control systems and control logic designs, documentation of operational procedures and as-built electrical drawings and logic. The Industrial electrical/Controls Technician is also the plant liaison for new system start up and commissioning by outside electrical and controls contractors and system integrators to ensure proper transfer of electrical red lines or updated electrical drawings and documented PLC programs changes and adequate training on the installation/changes that have been completed. The ICT is also responsible to keep control panels up to date and help rebuild when needed. The Electrical portion includes, designing, implementing electrical changes or additions to the electrical infrastructure. It is also the objective to oversee the contracted work to assure it is designed and installed per LFC guidelines. This position is also responsible to update the systems I/O list and create them if missing from the Document library. Job Duties (Accountability Categories and Essential Functions/Key Responsibilities): NOTE: The job may include other “non-essential” responsibilities and duties that are not listed on this form. Implementation of Control Systems Owns, drives, and has full accountability for designing and implementing new control systems and equipment on capital projects with the input from the engineering team. Oversees outside system integrators and controls contractors in their work within the facility. Ensures that all projects are documented, and information is available for use by all maintenance and production employees. Ensures work is accomplished in a safe and sanitary manner by directing employees and contractors and monitoring adherence to Company policies. Control System Maintenance & Inspection Has accountability for supporting server-based solutions and/or network infrastructure to maximize effectiveness of the plant's investment in shared computing resources, including effective deployment and utilization of servers (standalone and clustered), thin clients/terminal services, structured cabling, routers, switches, and network This more in the controls system side of our network. Asset-Center, Wonderware etc. Performs, provides details for, and inspects repairs to control and instrumentation systems to prevent downtime and ensure compliance with plant standards and governmental regulations. Determines necessary quantities of spare controls and instrumentation parts and supplies for all plant equipment. Ensure all Control systems, PLC and MCC have a current I/O List. Training and Documentation Ensures that appropriate training and documentation is available for use in proper training of Maintenance and Operations personnel. Coordinates, champions, and provides training and development for Maintenance Technicians to upgrade their controls skill levels. Accountable for maintaining appropriate records and files pertaining to plant maintenance activities to ensure availability of information regarding machine and facilities requirements. Problem-solving & Troubleshooting Acts as resource to production and maintenance teams, in problem solving and troubleshooting, operational activities to reduce downtime related to electrical and control problems. Integrates LEPRINO QUALITY into all aspects of the Allendale plant as evidenced by demonstrated continuous improvement, teamwork with co-workers, distinguished customer service and striving for excellence. Qualifications & Experience: Knowledge and Skills Knowledge of plant controls systems including PLCs and industrial automation software such as Wonderware. Proficient in the Microsoft Office Suite programs. Familiar with industrial operations, preferably dairy or food manufacturing. Effective oral and written communication skills. Excellent organizational skills. Creative thinker with a process improvement mindset. Demonstrated experience achieving high levels of customer service with cross-functional teams. Education and Experience Minimum of two-year electrical/electronic technical degree or five years demonstrated experience in industrial controls system development and troubleshooting. Or aptitude to go to classes to augment either. Strong knowledge of maintenance industry best practices. Practical experience leading loss control efforts in general industry. Offering you in return: A chance to be part of a global team of individuals passionate about producing and delivering high-quality products that help feed and nourish families around the world. Leprino Foods could not be where it is today without our incredible employees. That is why we share in our success together by rewarding you for your hard work. Hiring great people who are in it for the long run is our goal. Through competitive salaries, tuition assistance, vacation, holiday, dedicated sick time, matching 401(k), annual merit increases and bonuses, as well as our annual Profit-Sharing plan. Your impact will be noticed and rewarded, as you seek to further our company, our customers, and one another. Our Story: Leprino Foods' history dates back over 65 years, when Jim Leprino first started making small batches of mozzarella for local markets and eateries in the Little Italy neighborhood of Denver. We've grown a bit since then. Today, Leprino is the world's largest manufacturer of mozzarella and lactose, and a leading producer of whey protein. Still owned by Jim and the Leprino family, our sights are set to be the “World's Best Dairy Food and Ingredient Company.” To help us achieve that bold vision, we're looking for our secret ingredient: You. A motivated team member who is the best at what you do. Three people in a small corner grocery store in the early 1950s have now grown to over 4,300 employees throughout 16 global locations. Will you join us on our journey? Leprino Foods Company utilizes the services of Psychemedics to perform our Hair Follicle Drug Testing. Additional information about this process can be obtained at ******************** Leprino Foods Company supports a drug-free workplace and is an EEO/Affirmative Action Employer - M/F/Disability/Veteran Leprino Foods requires all individuals to wear the appropriate Personal Protection Equipment (PPE) as required by the role and location At Leprino, we believe in equal employment opportunity and make employment decisions based on each individual's unique talents, experience, skills, and knowledge; we do not discriminate on the basis of any personal characteristics. We know we are better together and are committed to creating an inclusive and supportive culture in which all employees can thrive. Nearest Major Market: Lubbock

Purpose Accountable for basic operation of the site's quality assurance and control program including but not limited to: assisting and supporting all safety, environmental and quality regulations, product testing and adherence to standards, targets and recipes, maintain relevant equipment and calibrations, and decision-making through basic statistical understanding. Key Responsibilities Perform all work in accordance with safety rules and regulations and participate in facility health & safety activities as assigned Use descriptive statistics to identify non-conforming material to site referenced standards and targets Ensure all relevant quality requirements are consistently met according to the QA manual and plant SOPs Ensure that non-conforming product is appropriately quarantined, identified and segregated according to standard procedures Ensure the communication of non-conformance is clear and concise to required parties. Disposition basic non-conforming product as allowed by site Technical Manager. Record testing and inspection results by inputting into appropriate database or spreadsheets while identifying and responding to test results outside of product standards and targets Verify that all product packaging and appearance standards meet site and client expectations. Generate and analyze reports and charts Monitor and document process parameter changes as assigned Communicate test results and observations to operations and management to maintain process and product conformance Monitor and record consumption and inventory of raw materials (wax, resin, etc.). Verify quality of raw materials as required Support preventive and unscheduled maintenance tasks. Assist in process and product tests/trials. Be pro-active in identifying and performing other tasks to maintain and improve safety, quality and environmental performance Demonstrate adherence to process and product SOPs, JSAs, check sheets and other QMS documentation Provide support to team members when a quality issue arises Demonstrate drive and willingness to advance to higher levels of responsibility Perform in a relief capacity for production coordinator Perform other duties as assigned Models company core values Other duties as assigned Required Qualifications Associate's Degree and two years of experience in laboratory work, quality control, or general manufacturing; or an equivalent combination of training, education, and experience Knowledge of and ability to follow all quality and process standards Demonstrated ability to operate a computer and supporting software, to include spreadsheet and statistical packages Working knowledge of manufacturing equipment and production processes Demonstrated ability to operate sample preparation and testing equipment Knowledge of inventory management Excellent verbal and written communication as well as interpersonal skills Proficient math skills and statistical knowledge, including concepts Demonstrated ability to operate a variety of material handling equipment (both hand tools and electrical/motorized equipment) Ability to climb stairs and lift up to 50 pounds Demonstrated ability to work while wearing a respirator and/or other safety clothing or equipment Preferred Qualifications Associate degree in Forest Products, Engineering, Wood Science or related scientific field preferred Three (3) years composite or engineered wood manufacturing experience About Roseburg Forest Products Founded in 1936, Roseburg Forest Products is a privately held company based in Springfield, Oregon. With a legacy in sustainable forestry and innovative wood products manufacturing, we are a leading North American producer of engineered wood, exterior trim, plywood, lumber, and medium density fiberboard (MDF). Our products shape and support homes, workplaces, and industries, while our timberlands protect forest health for future generations and provide high-quality wood fiber for our integrated operations. At Roseburg, we believe in making lives better from the ground up through the products we create, the relationships we build, and the communities we support. Our team of passionate professionals value safety, integrity, and excellence in all we do. From the mill to the forest to the office, you'll find opportunities to grow and contribute to a company that cares for people, communities, and the environment. Learn more about who we are and what we do at ***************** Benefits at Roseburg Roseburg offers a comprehensive and competitive benefits package to support the health, financial security, and well-being of our team members and their families. Key benefits include: Bonus opportunities based on company and individual performance 401(k) with up to 4% company match and 3% automatic company contribution Vacation starting at 3 weeks and 11 paid holidays per year Company-sponsored medical, dental, and vision insurance Company-paid life, AD&D, and long-term disability insurance options Mental health benefits for the entire family, including 8 free annual sessions per person Wellness programs and incentives, including biometric screenings & wellness challenges Paid time away from work for illness or injury, as well as paid parental bonding time Health Savings Account (HSA) with company contributions and Flexible Spending Account (FSA) options Company match for charitable contributions Education assistance and professional development support Financial and retirement counseling Additional voluntary benefits including pet insurance, student loan refinancing, and exclusive scholarships for child dependents, and more! AN EQUAL OPPORTUNITY EMPLOYER INCLUDING DISABILITY AND VETERANS

CF Industries has many exciting and challenging opportunities at its world class production facility in Yazoo City Mississippi. The employee in this position will be responsible for the analysis of a wide range of samples submitted by the Yazoo City Complex to ensure they meet quality specifications. These include in process samples, raw products, and finished products. The employee will also perform routine analysis on environmental samples, quality control and calibration of laboratory instrumentation, and data entry. JOB RESPONSIBILITIES: Receive and log samples into LIMS system Perform Analytical Chemistry testing as required Prepare Reports of Analytical Chemistry Results Check, Calibrate, and Maintain Laboratory Equipment SUCCESSFUL INCUMBENTS WILL HAVE: Bachelor's degree in chemistry from an A.C.S. accredited chemistry program is preferred. Bachelor's Degree in other physical science disciplines will be considered if strong evidence of laboratory analytical chemistry skill is demonstrated Minimum of 1 year of Analytical Chemistry laboratory experience preferred Experience with ICP, UV-VIS, GC, IC, and FT-IR, is valuable Excellent written and verbal communication skills required. Both informal and formal data reporting and use of IT will tools be required Presentation skills sufficient to communicate thoughts succinctly to Lab Supervisor and Operations managers Proficient with Microsoft Office tools including Outlook, Word, Excel and PowerPoint Excellent time management skills and be comfortable working in an environment where priorities change rapidly Applicants considered for this position will be required to perform analytical skills or techniques to demonstrate proficiency (Examples: Spectroscopy, Chromatography, Qualitative Analysis etc.) POSITION SCOPE/CONTRIBUTION: The Chemist in this position will work closely with one or more quality control technicians and will be responsible for analysis of a wide range of samples submitted by the Yazoo City Complex. Certain samples will need to be collected by the lab. Samples are analyzed to ensure they meet quality specifications as set by the company and our customers. Employees working in this lab must be fully committed to CF's Environmental, Health, Safety, Security, and Quality objectives. This position requires 12 hour rotating shifts, mandatory overtime, and weekends.

CF Industries has many exciting and challenging opportunities at its world class production facility in Yazoo City Mississippi. The employee in this position will be responsible for the analysis of a wide range of samples submitted by the Yazoo City Complex to ensure they meet quality specifications. These include in process samples, raw products, and finished products. The employee will also perform routine analysis on environmental samples, quality control and calibration of laboratory instrumentation, and data entry. JOB RESPONSIBILITIES: Receive and log samples into LIMS system Perform Analytical Chemistry testing as required Prepare Reports of Analytical Chemistry Results Check, Calibrate, and Maintain Laboratory Equipment SUCCESSFUL INCUMBENTS WILL HAVE: Bachelor's degree in chemistry from an A.C.S. accredited chemistry program is preferred. Bachelor's Degree in other physical science disciplines will be considered if strong evidence of laboratory analytical chemistry skill is demonstrated Minimum of 1 year of Analytical Chemistry laboratory experience preferred Experience with ICP, UV-VIS, GC, IC, and FT-IR, is valuable Excellent written and verbal communication skills required. Both informal and formal data reporting and use of IT will tools be required Presentation skills sufficient to communicate thoughts succinctly to Lab Supervisor and Operations managers Proficient with Microsoft Office tools including Outlook, Word, Excel and PowerPoint Excellent time management skills and be comfortable working in an environment where priorities change rapidly Applicants considered for this position will be required to perform analytical skills or techniques to demonstrate proficiency (Examples: Spectroscopy, Chromatography, Qualitative Analysis etc.) POSITION SCOPE/CONTRIBUTION: The Chemist in this position will work closely with one or more quality control technicians and will be responsible for analysis of a wide range of samples submitted by the Yazoo City Complex. Certain samples will need to be collected by the lab. Samples are analyzed to ensure they meet quality specifications as set by the company and our customers. Employees working in this lab must be fully committed to CF's Environmental, Health, Safety, Security, and Quality objectives. This position requires 12 hour rotating shifts, mandatory overtime, and weekends.

CF Industries has many exciting and challenging opportunities at its world class production facility in Yazoo City Mississippi. The employee in this position will be responsible for the analysis of a wide range of samples submitted by the Yazoo City Complex to ensure they meet quality specifications. These include in process samples, raw products, and finished products. The employee will also perform routine analysis on environmental samples, quality control and calibration of laboratory instrumentation, and data entry. JOB RESPONSIBILITIES: Receive and log samples into LIMS system Perform Analytical Chemistry testing as required Prepare Reports of Analytical Chemistry Results Check, Calibrate, and Maintain Laboratory Equipment SUCCESSFUL INCUMBENTS WILL HAVE: Bachelor's degree in chemistry from an A.C.S. accredited chemistry program is preferred. Bachelor's Degree in other physical science disciplines will be considered if strong evidence of laboratory analytical chemistry skill is demonstrated Minimum of 1 year of Analytical Chemistry laboratory experience preferred Experience with ICP, UV-VIS, GC, IC, and FT-IR, is valuable Excellent written and verbal communication skills required. Both informal and formal data reporting and use of IT will tools be required Presentation skills sufficient to communicate thoughts succinctly to Lab Supervisor and Operations managers Proficient with Microsoft Office tools including Outlook, Word, Excel and PowerPoint Excellent time management skills and be comfortable working in an environment where priorities change rapidly Applicants considered for this position will be required to perform analytical skills or techniques to demonstrate proficiency (Examples: Spectroscopy, Chromatography, Qualitative Analysis etc.) POSITION SCOPE/CONTRIBUTION: The Chemist in this position will work closely with one or more quality control technicians and will be responsible for analysis of a wide range of samples submitted by the Yazoo City Complex. Certain samples will need to be collected by the lab. Samples are analyzed to ensure they meet quality specifications as set by the company and our customers. Employees working in this lab must be fully committed to CF's Environmental, Health, Safety, Security, and Quality objectives. This position requires 12 hour rotating shifts, mandatory overtime, and weekends.

CF Industries has many exciting and challenging opportunities at its world class production facility in Yazoo City Mississippi. The employee in this position will be responsible for the analysis of a wide range of samples submitted by the Yazoo City Complex to ensure they meet quality specifications. These include in process samples, raw products, and finished products. The employee will also perform routine analysis on environmental samples, quality control and calibration of laboratory instrumentation, and data entry. JOB RESPONSIBILITIES: Receive and log samples into LIMS system Perform Analytical Chemistry testing as required Prepare Reports of Analytical Chemistry Results Check, Calibrate, and Maintain Laboratory Equipment SUCCESSFUL INCUMBENTS WILL HAVE: Bachelor's degree in chemistry from an A.C.S. accredited chemistry program is preferred. Bachelor's Degree in other physical science disciplines will be considered if strong evidence of laboratory analytical chemistry skill is demonstrated Minimum of 1 year of Analytical Chemistry laboratory experience preferred Experience with ICP, UV-VIS, GC, IC, and FT-IR, is valuable Excellent written and verbal communication skills required. Both informal and formal data reporting and use of IT will tools be required Presentation skills sufficient to communicate thoughts succinctly to Lab Supervisor and Operations managers Proficient with Microsoft Office tools including Outlook, Word, Excel and PowerPoint Excellent time management skills and be comfortable working in an environment where priorities change rapidly Applicants considered for this position will be required to perform analytical skills or techniques to demonstrate proficiency (Examples: Spectroscopy, Chromatography, Qualitative Analysis etc.) POSITION SCOPE/CONTRIBUTION: The Chemist in this position will work closely with one or more quality control technicians and will be responsible for analysis of a wide range of samples submitted by the Yazoo City Complex. Certain samples will need to be collected by the lab. Samples are analyzed to ensure they meet quality specifications as set by the company and our customers. Employees working in this lab must be fully committed to CF's Environmental, Health, Safety, Security, and Quality objectives. This position requires 12 hour rotating shifts, mandatory overtime, and weekends.

Purpose Accountable for basic operation of the site's quality assurance and control program including but not limited to: assisting and supporting all safety, environmental and quality regulations, product testing and adherence to standards, targets and recipes, maintain relevant equipment and calibrations, and decision-making through basic statistical understanding. Key Responsibilities Perform all work in accordance with safety rules and regulations and participate in facility health & safety activities as assigned Use descriptive statistics to identify non-conforming material to site referenced standards and targets Ensure all relevant quality requirements are consistently met according to the QA manual and plant SOPs Ensure that non-conforming product is appropriately quarantined, identified and segregated according to standard procedures Ensure the communication of non-conformance is clear and concise to required parties. Disposition basic non-conforming product as allowed by site Technical Manager. Record testing and inspection results by inputting into appropriate database or spreadsheets while identifying and responding to test results outside of product standards and targets Verify that all product packaging and appearance standards meet site and client expectations. Generate and analyze reports and charts Monitor and document process parameter changes as assigned Communicate test results and observations to operations and management to maintain process and product conformance Monitor and record consumption and inventory of raw materials (wax, resin, etc.). Verify quality of raw materials as required Support preventive and unscheduled maintenance tasks. Assist in process and product tests/trials. Be pro-active in identifying and performing other tasks to maintain and improve safety, quality and environmental performance Demonstrate adherence to process and product SOPs, JSAs, check sheets and other QMS documentation Provide support to team members when a quality issue arises Demonstrate drive and willingness to advance to higher levels of responsibility Perform in a relief capacity for production coordinator Perform other duties as assigned Models company core values Other duties as assigned Required Qualifications Associate's Degree and two years of experience in laboratory work, quality control, or general manufacturing; or an equivalent combination of training, education, and experience Knowledge of and ability to follow all quality and process standards Demonstrated ability to operate a computer and supporting software, to include spreadsheet and statistical packages Working knowledge of manufacturing equipment and production processes Demonstrated ability to operate sample preparation and testing equipment Knowledge of inventory management Excellent verbal and written communication as well as interpersonal skills Proficient math skills and statistical knowledge, including concepts Demonstrated ability to operate a variety of material handling equipment (both hand tools and electrical/motorized equipment) Ability to climb stairs and lift up to 50 pounds Demonstrated ability to work while wearing a respirator and/or other safety clothing or equipment Preferred Qualifications Associate degree in Forest Products, Engineering, Wood Science or related scientific field preferred Three (3) years plywood, composite, or engineered wood manufacturing experience About Roseburg Forest Products Founded in 1936, Roseburg Forest Products is a privately held company based in Springfield, Oregon. With a legacy in sustainable forestry and innovative wood products manufacturing, we are a leading North American producer of engineered wood, exterior trim, plywood, lumber, and medium density fiberboard (MDF). Our products shape and support homes, workplaces, and industries, while our timberlands protect forest health for future generations and provide high-quality wood fiber for our integrated operations. At Roseburg, we believe in making lives better from the ground up through the products we create, the relationships we build, and the communities we support. Our team of passionate professionals value safety, integrity, and excellence in all we do. From the mill to the forest to the office, you'll find opportunities to grow and contribute to a company that cares for people, communities, and the environment. Learn more about who we are and what we do at ***************** Benefits at Roseburg Roseburg offers a comprehensive and competitive benefits package to support the health, financial security, and well-being of our team members and their families. Key benefits include: Bonus opportunities based on company and individual performance 401(k) with up to 4% company match and 3% automatic company contribution Vacation starting at 3 weeks and 11 paid holidays per year Company-sponsored medical, dental, and vision insurance Company-paid life, AD&D, and long-term disability insurance options Mental health benefits for the entire family, including 8 free annual sessions per person Wellness programs and incentives, including biometric screenings & wellness challenges Paid time away from work for illness or injury, as well as paid parental bonding time Health Savings Account (HSA) with company contributions and Flexible Spending Account (FSA) options Company match for charitable contributions Education assistance and professional development support Financial and retirement counseling Additional voluntary benefits including pet insurance, student loan refinancing, and exclusive scholarships for child dependents, and more! AN EQUAL OPPORTUNITY EMPLOYER INCLUDING DISABILITY AND VETERANS

CF Industries has many exciting and challenging opportunities at its world class production facility in Yazoo City Mississippi. The employee in this position will be responsible for the analysis of a wide range of samples submitted by the Yazoo City Complex to ensure they meet quality specifications. These include in process samples, raw products, and finished products. The employee will also perform routine analysis on environmental samples, quality control and calibration of laboratory instrumentation, and data entry. JOB RESPONSIBILITIES: Receive and log samples into LIMS system Perform Analytical Chemistry testing as required Prepare Reports of Analytical Chemistry Results Check, Calibrate, and Maintain Laboratory Equipment SUCCESSFUL INCUMBENTS WILL HAVE: Bachelor's degree in chemistry from an A.C.S. accredited chemistry program is preferred. Bachelor's Degree in other physical science disciplines will be considered if strong evidence of laboratory analytical chemistry skill is demonstrated Minimum of 1 year of Analytical Chemistry laboratory experience preferred Experience with ICP, UV-VIS, GC, IC, and FT-IR, is valuable Excellent written and verbal communication skills required. Both informal and formal data reporting and use of IT will tools be required Presentation skills sufficient to communicate thoughts succinctly to Lab Supervisor and Operations managers Proficient with Microsoft Office tools including Outlook, Word, Excel and PowerPoint Excellent time management skills and be comfortable working in an environment where priorities change rapidly Applicants considered for this position will be required to perform analytical skills or techniques to demonstrate proficiency (Examples: Spectroscopy, Chromatography, Qualitative Analysis etc.) POSITION SCOPE/CONTRIBUTION: The Chemist in this position will work closely with one or more quality control technicians and will be responsible for analysis of a wide range of samples submitted by the Yazoo City Complex. Certain samples will need to be collected by the lab. Samples are analyzed to ensure they meet quality specifications as set by the company and our customers. Employees working in this lab must be fully committed to CF's Environmental, Health, Safety, Security, and Quality objectives. This position requires 12 hour rotating shifts, mandatory overtime, and weekends.

CF Industries has many exciting and challenging opportunities at its world class production facility in Yazoo City Mississippi. The employee in this position will be responsible for the analysis of a wide range of samples submitted by the Yazoo City Complex to ensure they meet quality specifications. These include in process samples, raw products, and finished products. The employee will also perform routine analysis on environmental samples, quality control and calibration of laboratory instrumentation, and data entry. JOB RESPONSIBILITIES: Receive and log samples into LIMS system Perform Analytical Chemistry testing as required Prepare Reports of Analytical Chemistry Results Check, Calibrate, and Maintain Laboratory Equipment SUCCESSFUL INCUMBENTS WILL HAVE: Bachelor's degree in chemistry from an A.C.S. accredited chemistry program is preferred. Bachelor's Degree in other physical science disciplines will be considered if strong evidence of laboratory analytical chemistry skill is demonstrated Minimum of 1 year of Analytical Chemistry laboratory experience preferred Experience with ICP, UV-VIS, GC, IC, and FT-IR, is valuable Excellent written and verbal communication skills required. Both informal and formal data reporting and use of IT will tools be required Presentation skills sufficient to communicate thoughts succinctly to Lab Supervisor and Operations managers Proficient with Microsoft Office tools including Outlook, Word, Excel and PowerPoint Excellent time management skills and be comfortable working in an environment where priorities change rapidly Applicants considered for this position will be required to perform analytical skills or techniques to demonstrate proficiency (Examples: Spectroscopy, Chromatography, Qualitative Analysis etc.) POSITION SCOPE/CONTRIBUTION: The Chemist in this position will work closely with one or more quality control technicians and will be responsible for analysis of a wide range of samples submitted by the Yazoo City Complex. Certain samples will need to be collected by the lab. Samples are analyzed to ensure they meet quality specifications as set by the company and our customers. Employees working in this lab must be fully committed to CF's Environmental, Health, Safety, Security, and Quality objectives. This position requires 12 hour rotating shifts, mandatory overtime, and weekends.

At Furmano Foods, you'll become part of a family-owned business with a purpose far greater than profit. Rooted in faith and tradition since 1921, we are passionate about producing quality, nutritious food, serving others with humility, and stewarding the land for future generations. As a values-driven organization, we offer competitive compensation, comprehensive benefits, and the opportunity to make a meaningful and lasting impact. The Automation Technician plays a vital role in supporting and advancing the automated systems throughout the food manufacturing facility. This individual will be responsible for the installation, maintenance, troubleshooting, and enhancement of electrical and control systems with a strong focus on safety, quality, and continuous improvement. Education and Experience: Associate degree in Electrical Technology or related field is strongly preferred. Minimum 3 years of experience in automation, instrumentation, or controls within a food manufacturing or industrial setting. · Equivalent combinations of education and experience will be considered. Essential Duties and Responsibilities: 1.Ensure food safety compliance in all activities, report concerns promptly to supervisors or managers. 2.Recommend and specify new automation systems and control solutions to improve plant efficiency. 3.Maintain and troubleshoot electrical/electronic systems including PLCs, HMIs, robotics, servos, sensors, and associated hardware. 4.Lead or support the design, programming, and installation of control systems using Allen-Bradley or equivalent platforms. 5.Collaborate on continuous improvement projects and plant-wide modernization efforts. 6.Assist with the execution and management of capital projects under the direction of the Director of Engineering. 7.Provide day-to-day support for the Engineering and Maintenance Department, including documentation and scheduling. 8.Maintain accurate and detailed records of work performed, including updates to schematics and software logs. 9.Promote a culture of teamwork, integrity, and proactive communication. 10.Perform other related duties as assigned. Skills and Competencies: Proficiency in PLC programming and troubleshooting (especially Allen-Bradley hardware/software). Working knowledge of operator interfaces (HMIs), robotics, VFDs, and servo systems. Ability to interpret and modify electrical schematics and automation documentation. Strong capabilities in ladder logic, control narratives, and system integration. Experience using AutoCAD, Microsoft Excel, Word, and Project. Excellent written and verbal communication skills; ability to work in a cross-functional team environment. Organized, detail-oriented, and comfortable in a fast-paced production environment. Education: Associate (Preferred) Experience: Industrial controls: 3 years (Required) Physical Requirements: Body Movements - the amount of time spent performing each physical requirement: Occasional - 1/3 or less Frequent - 1/3 to 2/3 Continuous - 2/3 or more Standing: Frequent to Continuous Walking: Frequent to continuous Sitting: Occasional to Frequent Lifting: Occasional to frequent (medium duty position / ability to lift 30lbs) Carrying: Occasional to frequent (medium duty position / ability to carry 30lbs) Climbing: Occasional Climbing Stairs: Occasional Climbing ladders: Occasional Crawling: Occasional Working in kneeling position: Occasional Working with arms extended at shoulder level or above: Occasional Twisting and Turning: Frequent to continuous Reaching: Occasional to frequent Bending: Occasional to frequent Driving: Occasional Pushing and Pulling: Occasional Hand Movement: Manual dexterity Simple grasping: frequent Job Type: Full-time Work Schedule: This position typically follows the hours of the shift scheduled to work; however, working days may vary based on season. Typically, Monday through Friday. Very often Saturday & 12 hours Shifts may be required during busy times. Hours: 2nd Shift - 2:00 PM to 10:30 PM/ 3rd Shift - 10:00 PM to 6:30 AM 30 minutes unpaid lunch Salary: Up to $35.34 per Hour Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Employee discount Flexible spending account Health insurance Health savings account Life insurance Paid time off Referral program Retirement plan Vision insurance Onsite nurse Corporate Chaplain Ability to Commute: Northumberland, PA 17857 (Required) Ability to Relocate: Northumberland, PA 17857: Relocate before starting work (Preferred) Work Location: In person Employment Disclaimer: This position is based in Pennsylvania and is considered "at-will." This means that either the employee or the employer may terminate the employment relationship at any time, with or without notice, and for any reason not prohibited by law. We are an equal opportunity employer and comply with all applicable federal, state, and local employment laws, including those prohibiting discrimination on the basis of race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, or any other protected status under the law. This job description describes the general nature of the duties and requirements of this job. It is not intended to be an exhaustive list or limit the supervisor's ability to modify work assignments as appropriate to meet the needs of the organization.

The Bike Technician is responsible for the efficient collection and redistribution of bikes throughout the facility to ensure they are available in designated areas for use. This role does involve minimal bike maintenance or repair. The technician wi Technician, Social Services, Property Management, Vehicle

ABM (NYSE: ABM) is one of the world's largest providers of integrated facility, engineering, and infrastructure solutions. Every day, our over 100,000 team members deliver essential services that make spaces cleaner, safer, and efficient, enhancing the overall occupant experience. ABM serves a wide range of market sectors including commercial real estate, aviation, education, mission critical, and manufacturing and distribution. With over $8 billion in annual revenue and a blue-chip client base, ABM delivers innovative technologies and sustainable solutions that enhance facilities and empower clients to achieve their goals. Committed to creating smarter, more connected spaces, ABM is investing in the future to meet evolving challenges and build a healthier, thriving world. ABM: Driving possibility, together. ABM is an Equal Employment Opportunity (EEO) employer that does not discriminate on the basis of any trait or characteristic protected by applicable federal, state, or local law, including disability and protected veteran status. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call ************. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you'll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you're looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at ******************** ABM does not accept unsolicited resumes. For more information, visit *********** The Technician completes assigned preventive maintenance and reactive maintenance repairs. The Bike Technician is responsible for the efficient collection and redistribution of bikes throughout the facility to ensure they are available in designated areas for use. This role does involve minimal bike maintenance or repair. The technician will operate a company vehicle to transport bikes as needed and must hold a valid driver's license. Location: 109 N Browne Pay: $15.00 Position Summary: The Bike Technician is responsible for the efficient collection and redistribution of bikes throughout the facility to ensure they are available in designated areas for use. This role does involve minimal bike maintenance or repair. The technician will operate a company vehicle to transport bikes as needed and must hold a valid driver's license. Key Responsibilities: Pick up bikes from various locations within the facility and place them in designated areas. Drive a company vehicle safely to transport bikes between locations. Ensure bikes are organized and accessible for employees and visitors. Follow all company safety protocols and traffic regulations while operating vehicles. Communicate with supervisors regarding bike availability and any issues encountered during redistribution. Qualifications: High school diploma or equivalent preferred. Valid driver's license with a clean driving record (required). Ability to operate company vehicles safely and responsibly. Strong attention to detail and organizational skills. Ability to work independently and manage time effectively. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM's benefits, visit ABM Team Member Benefits | Front Line Team Members | (Programa de Beneficios de ABM) Physical Requirements: * Ability to lift and move bikes as needed. * Comfortable working outdoors and driving for extended periods A good job for someone just entering the workforce or returning to the workforce with limited experience and education. ABM is a military and veteran friendly employer, veterans and candidates with military experience encouraged to apply. Military Occupational Specialty Code: 91E, 91C, EM, HT, MK, DC, 1161, 1341, 3E1X1 The Bike Technician is responsible for the efficient collection and redistribution of bikes throughout the facility to ensure they are available in designated areas for use. This role does involve minimal bike maintenance or repair. The technician will operate a company vehicle to transport bikes as needed and must hold a valid driver's license. Location: 109 N Browne Pay: $15.00 Position Summary: The Bike Technician is responsible for the efficient collection and redistribution of bikes throughout the facility to ensure they are available in designated areas for use. This role does involve minimal bike maintenance or repair. The technician will operate a company vehicle to transport bikes as needed and must hold a valid driver's license. Key Responsibilities: Pick up bikes from various locations within the facility and place them in designated areas. Drive a company vehicle safely to transport bikes between locations. Ensure bikes are organized and accessible for employees and visitors. Follow all company safety protocols and traffic regulations while operating vehicles. Communicate with supervisors regarding bike availability and any issues encountered during redistribution. Qualifications: High school diploma or equivalent preferred. Valid driver's license with a clean driving record (required). Ability to operate company vehicles safely and responsibly. Strong attention to detail and organizational skills. Ability to work independently and manage time effectively. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM's benefits, visit ABM Team Member Benefits | Front Line Team Members | (Programa de Beneficios de ABM) Physical Requirements: * Ability to lift and move bikes as needed. * Comfortable working outdoors and driving for extended periods A good job for someone just entering the workforce or returning to the workforce with limited experience and education. ABM is a military and veteran friendly employer, veterans and candidates with military experience encouraged to apply. Military Occupational Specialty Code: 91E, 91C, EM, HT, MK, DC, 1161, 1341, 3E1X1

The Bike Technician is responsible for the efficient collection and redistribution of bikes throughout the facility to ensure they are available in designated areas for use. This role does involve minimal bike maintenance or repair. The technician will operate a company vehicle to transport bikes as needed and must hold a valid driver's license. **Location:** 109 N Browne **Pay:** $15.00 **Position Summary:** The Bike Technician is responsible for the efficient collection and redistribution of bikes throughout the facility to ensure they are available in designated areas for use. This role does involve minimal bike maintenance or repair. The technician will operate a company vehicle to transport bikes as needed and must hold a valid driver's license. **Key Responsibilities:** + Pick up bikes from various locations within the facility and place them in designated areas. + Drive a company vehicle safely to transport bikes between locations. + Ensure bikes are organized and accessible for employees and visitors. + Follow all company safety protocols and traffic regulations while operating vehicles. + Communicate with supervisors regarding bike availability and any issues encountered during redistribution. **Qualifications:** + High school diploma or equivalent preferred. + Valid driver's license with a clean driving record (required). + Ability to operate company vehicles safely and responsibly. + Strong attention to detail and organizational skills. + Ability to work independently and manage time effectively. **Benefit Information:** ABM offers a comprehensive benefits package. For information about ABM's benefits, visit ABM Team Member Benefits | Front Line Team Members (******************************************************************************************************** | (Programa de Beneficios de ABM) (************************************************************************************************************************ **Physical Requirements:** + Ability to lift and move bikes as needed. + Comfortable working outdoors and driving for extended periods A good job for someone just entering the workforce or returning to the workforce with limited experience and education. ABM is a military and veteran friendly employer, veterans and candidates with military experience encouraged to apply. Military Occupational Specialty Code: 91E, 91C, EM, HT, MK, DC, 1161, 1341, 3E1X1 REQNUMBER: 142098 ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call ************. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis.

Your Career Begins at Timken If you're ready for a challenging career that provides you with the ability to advance personally and professionally, look to Timken. Our associates make the world more productive by improving the efficiency and reliability of the machinery that keeps industry in motion. Manufacturing Technician Scope: Set-up and operate precision CNC machining equipment to produce ball bearing components. This is a 2nd shift position, with regular hours of 3:00 p.m. to 11:00 p.m. Monday - Friday. What We Offer Competitive pay. Comprehensive benefits package including medical, prescription drug, dental, and vision insurance. Benefits start on first day of employment. Opportunities for career advancement. Supportive and team-oriented work environment. Safe, clean, comfortable work environment. Position Summary Timken is looking for a skilled Machine Operator to set up, maintain, and operate production machinery. You'll ensure high productivity while meeting exacting safety and quality requirements. If you have a strong attention to detail and passion for ensuring quality output, we invite you to apply. Position Responsibilities: Setup and Operations - Set-up and operate production equipment including CNC lathes, honers, and bore grinders. Gauging - Basic measurement of bearing geometry using state-of-the-art computer controlled gauging equipment as well as digital calipers, micrometers, metallurgical techniques, and dial indicators. Quality through Process Control - Use process control techniques such as SPC, Histograms, Pareto analysis, etc. to understand and make adjustments to the manufacturing process. Emphasis placed on recognition, diagnosis and correction of out-of-control conditions. Will make quality checks to include concentricity, roundness, barreling, and eccentricity. Tolerancing up to and including .0000050. Problem solve to achieve above tolerancing and quality. Zone Control - sound ANDON to signal abnormal condition or problem. Problem solve to correct issue. Maintenance - Monitor, clean, and inspect equipment to prevent problems before they occur, tied with routine maintenance of equipment and troubleshooting problems of minor to moderate complexity. Perform operator level Preventive Maintenance. Material Handling - Move work in process to adjacent operations. Complete affiliated administrative flow requirements as needed. Customer Focus - Achieve a clear understanding of the customer's (internal and external) technical requirements for each order. Responsible for assuring conformance to these requirements. Team Participation - Collaborate with a variety of plant teams focused on continuous improvement. Occasionally serve as facilitator of such teams. Regularly rotate to other machines and assist team members in meeting Team Metrics. Training - Continuously develop and upgrade training materials used to train other technicians, and occasionally assist in training. Safety - Requires daily participation and involvement in individual and team safety responsibilities such as Behavior Based Safety, daily housekeeping, proper use of Personal Protective Equipment (PPE), and adherence to all safety requirements and policies. Continuous Improvement - Generate and implement ideas for quality improvements and cost savings. Basic Requirements: Proven experience as a Machine Operator or similar role in a manufacturing environment. Technical skills in machine operation and troubleshooting. Ability to read blueprints, schematics, and manuals. Physical stamina and strength to lift heavy materials and work in a fast-paced environment. Attention to detail and quality-focused mindset. High school diploma or GED. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status. Timken is a global technology leader in engineered bearings and industrial motion. Our expanding portfolio of next-generation solutions helps customers around the world improve efficiency, solve their toughest challenges, and push the boundaries of performance. We employ 19,000 people globally, operate from 45 countries, and posted $4.6 billion in sales in 2024. We have been recognized as one of America's Most Responsible Companies 5x by Newsweek and one of the World's Most Ethical Companies 14x by Ethisphere. Why Choose Timken? Over a century of knowledge and innovation A culture of top performance A global, diverse environment Products that contribute to a sustainable world A conviction to improve communities around us Competitive salary and benefits Not Ready To Apply? Stay connected by joining our network and we'll keep you informed about upcoming events and opportunities that match your interests. Talent CommunityRequiredPreferredJob Industries Other

Be part of something bigger! As the world and the way people live is changing, we at Bekaert believe it's our responsibility to contribute to finding new solutions for the future. With a 140+ year old heritage of excellence, innovation, and a future-focused mindset, we strive to create value for our customers and society. We aim to do this through innovative solutions and sustainable practices. We are committed to pushing the boundaries of steel wire transformation and coatings whilst also leveraging our expertise to develop innovative solutions with new materials and services in a safe, smart, and sustainable way. Our focus extends to markets such as new mobility, low-carbon construction, and green energy. As a dynamic and growing company with over 24 000 employees worldwide, 75 nationalities, a retention rate above 90% and almost € 5 billion in combined revenue in 2024, we are looking for someone like you to join our team as we continue to shape a safer, more efficient, and connected world! Purpose and Mission Bekaert is seeking an experienced IT professional to lead IT Service Management and Process Excellence, ensuring high-quality service delivery and driving continuous improvement across IT operations. This role focuses on vendor governance, service level management, and process optimization, with a strong emphasis on managing global IT service providers (e.g., TCS, Infosys, Wipro) for quality and cost efficiency. How this role fits into Bekaert ADS: * Reports to: Global Lead IT Strategy, Governance & Transformation * Partners with: IT Service Owners, IT Product & Platform Teams, IT Leadership Teams * Key stakeholder groups: Business Units, Corporate Functions, IT Leadership Teams Key Activities and Responsibilities * IT Service Management Process Excellence & Continuous Improvement: Maintain and improve IT governance frameworks (ITIL, COBIT). Optimize key processes-Incident, Problem, Change, Service Level, Knowledge Management-using Lean-Agile principles and data-driven insights. Own IT-for-IT tools (ticketing, dashboards) to embed best practices and enable visibility. * IT Service Quality Assurance & Governance: Monitor SLA performance, report service quality, and drive compliance with GDPR, EU AI Act, and internal policies. Ensure audit readiness, manage evidence, and lead risk remediation. Deliver compliance reports and improvement recommendations to leadership. * Vendor Management: Govern IT service providers at contract level, maintain consolidated performance scorecards, and enforce systemic improvements across services. Support strategic negotiations and unified communication for cross-service enhancements. Skills TECHNICAL SKILLS Certifications: * ITIL Foundation (Capability or Lifecycle preferred); higher-level ITIL certifications desirable. * CGEIT, COBIT, CISSP * Lean/Agile certifications (preferred); PMP or equivalent project management certification (optional but desirable). * Compliance Certifications: Certifications such as CISA, or similar are highly desirable. Core Competencies: * Strong ITIL knowledge with proven governance experience. * Skilled in ITIL-based service management, SLA governance, and ITSM tools, approaches, and processes. * Ability to lead organizational change and quality initiatives. * Regulatory Knowledge: Deep understanding of relevant regulations (GDPR, EU AI Act, etc.) and their impact on IT service management. Technical Breadth: * Broad understanding of infrastructure, cybersecurity, applications, platforms, and cloud to govern service delivery effectively. * Ability to track service performance, interpret KPIs, and challenge internal IT product owners, service owners, and vendors using data-driven insights. SOFT SKILLS * Influence without Authority: Ability to steer decisions and drive change across global teams without direct reporting lines; strong facilitation and stakeholder engagement skills. * Change Leadership: Passion for shaping processes and driving transformation in complex environments; resilient and adaptable under ambiguity. * Lean-Agile Ways of Working: Advocate for iterative delivery, continuous improvement, and collaborative practices; experience applying Lean principles and Agile frameworks in IT service environments. * Measure & Grow Mindset: Focus on measurable outcomes with quantifiable KPIs; ability to define, track, and report improvements in service quality and efficiency. * Team Player: Skilled at bringing people together, fostering collaboration in multi-cultural, global teams. * Vendor Relationship Management: Strong negotiation and conflict resolution skills; ability to build trust and accountability with external partners while maintaining service excellence. Experience * Minimum 5+ years in IT Service Management, with proven record in service quality improvement and process optimization. * Preferred: At least 3-5 years as Delivery Manager or Key Account Manager in major IT service providers, managing service performance. * Experience managing global IT services with complexity across multiple domains like manufacturing, commercial, HR, finance, and internal processes. Familiarity with working with multi-cultural teams in a global setup, able to collaborate effectively across regions and time zones. * Oversight of more than 20 different IT services in different IT domains, ensuring cost efficiency, value delivery, and performance optimization across the entire service portfolio. * Demonstrated success in driving measurable improvements in service performance and user experience. * Audit Experience: Proven experience managing IT audits (internal/external), including evidence collection, process walkthroughs, and remediation of findings. Qualifications and Education * Bachelor's degree in Science, Technology or related field. MBA is a plus. Be bold and take the leap! Our Digital Advanced Solutions (ADS) team is a dynamic group of technologists from around the globe who consistently push boundaries in digital innovation, cyber resilience, data science, intelligent automation, cloud solutions, and new agile methodologies. It is also good to know tht at Bekaert, we celebrate diversity and are committed to creating an inclusive work environment. We do not discriminate based on race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. Want to learn more about our digital opportunities? Visit Bekaert Careers

Who We Are Royal is a diverse manufacturer of injection molding, urethane foam and assemblies. We serve the automotive, furniture, and consumer products industries. People who succeed at Royal are those who share the values of our company: Integrity. Stewardship. Teamwork. Hard work. Excellence. We're committed to being the employer of choice. Our goal is to build a culture of commitment where everyone is respected and valued. Where everyone participates. Where everyone matters. We give our employees the responsibility -- and the authority -- to make decisions. We try to provide the best possible work environment. We encourage creativity. We applaud ingenuity. We reward problem solving. What You'll Do We are looking for a hands-on, mechanically minded individual who has a desire to jump in and learn our injection molding machines and processes. If hired, you'll spend 9-12 months working through a robust in-house training program, designed to develop you into a technical leader at Royal. In house, we call this role a Molding Supervisor. You'll both manage a small team of molding operators as well as spend the majority of your time on the floor, assisting with molding changes and troubleshooting issues within our bay. Based out of our Cullman, AL facility, this position reports to the Production Manager. Core Responsibilities: Troubleshoot injection molding processes and equipment. Problem-solve in order to develop corrective actions for customer issues and ideas for improvement Climb in and out of injection molding equipment in order to best perform mold and color changes Prioritize production orders and oversee the production of quality products to ensure our customer standards and needs are met Maintain the work area, equipment and molds to provide the team with an organized workplace and proper tools Responsible for machine safety and for following all prescribed lock out procedures Other Responsibilities: Schedule team machine assignments and break coverage in order to hit daily goals Work alongside current Molding Supervisors, learning how to lead a small team (3-6) in the execution of daily production tasks and in continuous improvement Practice writing and conducting employee performance evaluations Physical Responsibilities: Ability to lift up to 55lbs Prolonged periods of standing, walking and performing repetitive tasks Bending and stooping Ability to use fingers, hands and arms to complete a task (dexterity) Hand-eye coordination All employees must wear approved safety glasses Starting Wage: $26-$33.00/hr + quarterly bonuses What You'll Bring Qualifications: Proven hands-on technical experience (work or personal) is highly preferred (utility, maintenance, process tech, etc.) Experience with injection molding equipment is a plus High school diploma/GED or 3-5 years of solid manufacturing experience Willing and able to work 45-50 hours per week Although this is a 3rd shift (12am-8am) position, there will be training required on 1st shift (8am-4pm) Interest in developing into a leadership role Prior leadership experience is greatly appreciated What You'll Get No Sunday work Weekly pay Quarterly bonuses based on profitability Ownership in the company through our ESOP plan (Employee Stock Ownership Plan) Outstanding medical insurance IND123HP #ZR