Electrical Engineer jobs at Generac Holdings - 2191 jobs

Responsibilities and Measurement Criteria with Time investment Needed on Each: (This will describe the overall core responsibilities of the role, decision making responsibilities etc.) Design and development of UPS subsystems/components in compliance with specifications, EMC/EMI requirements, and applicable standards. PCB design. Detailed analysis of UPS electronic subsystems/components, focusing on performance evaluation, design optimization, component selection and sizing, and control strategy. Collaboration in an interdisciplinary engineering environment (with embedded, test, and mechanical engineers) to define requirements, discuss trade-offs, participate in design verification, and ensure successful integration of single-phase UPS designs. Continuous improvement of existing designs, evaluation of application issues, and resolution of those issues in the design of new products. Evaluation of new technologies to enhance and implement them in new R&D systems and processes. Adherence to agreed-upon project timelines. Preparation of relevant technical reports. Qualifications: Required/ Minimum Qualifications: Master's degree or higher in Electrical Engineering with a focus on power electronics. Proficiency in medium-to-low power circuit topologies, principles of power electronic converters, and semiconductor devices. Additional / Preferred Qualifications: - Hands-on experience with PCB design and layout. Knowledge of electronic design practices for EMC compliance. Strong analytical skills combined with excellent problem-solving abilities and interpersonal communication. Experience in UPS and power module development is highly desirable. Physical & Environmental Requirements: - (To be used majorly for manufacturing jobs.) None Time Travel Needed: 10% OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #LI-CM1

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Michigan City Employment Status: Salary Full-Time Function: Engineering Pay Grade and Range: USXX - Grade USXX Salaried 57($74,603.39 - $138,549.16) Min $4,603 - Mid $106,576 Bonus Plan:8% Req ID: 27302 Job Summary As a member of the Engineering staff, the Electrical Engineer is responsible for the design of new products, prototypes, and carries through to full production. This Engineer will also be responsible for technical support of some mature products currently in production. This includes Code Changes, maintenance of Bills of Material, electrical schematics and drawings, assistance in troubleshooting and new installation verifications, design reviews, simple mechanical designs, documentation packages, pre-production builds and transfers to production. Primary Duties and Responsibilities Provides technical direction, serves as a point of contact or business liaison, prepares briefings for senior management and assists in problem resolution specific to the program / project. Designs and tests electrical and electronic products or systems. Designs and maintains electrical control systems and components to required specifications, focusing on safety, reliability, and cost. Creates wiring schematics, electrical harnessing, and Bills of Material relevant to electrical systems. Sizes and integrates overload and short circuit protections based on current applicable safety regulations, such as NEC, UL, and SAE. Writes manufacture and test procedures and reports. Participates in project teams and all activities related to the development and maintenance of products. Collaborates within the Engineering team to ensure design constraints are met, tested, and delivered on time and within budget. Provides technical support to Sales and Marketing for bids and proposals. Productively function in a fast-paced Engineering department that works intimately with manufacturing plant. Works cross-functionally with all other departments regarding electric controls and systems. Must be able to juggle priorities effectively. Must be able to transition from hands-on R&D or troubleshooting environment back to desk / office tasks effectively. Function well with group-oriented tasks, as well as solitary projects. Other duties as assigned. Job Qualifications and Skills Bachelor's Degree (BSEE or BSECET) from an accredited college or university. Minimum 2 years' experience in a job relevant to degreed field. Experience in design, repair, and analysis of electrical systems. Experience with CAN communication (SAE J1939 preferred). Must have exposure to electrical engineering principles and methodologies. Demonstrated 2D CAD system proficiency (preferably AutoCAD). Exposure to C, C++, and / or other programming languages. Data logging and sensor interface experience. Self-motivated, driven and goal-oriented. Possess strong verbal and written communication skills. Preferred Knowledge of PID controllers CAN communication experience Vehicle speed control experience Plusses Knowledge of compressor systems Advanced degree (MBA / MSEE) Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Plymouth - 46247 Req ID: 27950 Job Summary We are seeking an entry-level Industrial Controls Engineer with a focus on system design for custom machinery projects. This role offers hands-on training and mentorship to develop skills in electrical schematics, hardware selection, and control system architecture. Ideal for recent graduates eager to grow in industrial automation. Key Responsibilities Assist in developing control system architectures for custom machinery. Support hardware selection and creation of electrical schematics. Help prepare documentation including wiring diagrams and panel layouts. Collaborate with senior engineers on design reviews and integration tasks. Participate in installation and commissioning under supervision. Ensure compliance with safety and quality standards. Qualifications Bachelor's degree in related field (or in progress) or experience in related field. Basic understanding of electrical design principles. Familiarity with AutoCAD Electrical or willingness to learn. Strong interest in industrial automation and system design. Travel: 30% - 50% Preferred Skills Exposure to industrial networks (EtherNet/IP, Modbus, ProfiNET). Coursework or internship experience in control systems. Strong communication and teamwork skills. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Plymouth - 46247 Req ID: 27949 Job Summary We are seeking an Industrial Controls Engineer specializing in system design for custom machinery projects. This role focuses on developing complete control system architectures, including hardware selection, electrical schematics, and network layouts. The ideal candidate will excel in creating robust designs that integrate seamlessly with mechanical systems and meet customer specifications. Key Responsibilities Develop complete control system architectures for custom machinery. Select hardware components and design electrical schematics. Create network layouts and ensure system scalability. Collaborate with mechanical engineers for integration. Prepare detailed wiring diagrams and panel layouts. Ensure compliance with NFPA, UL, and OSHA standards. Support installation and commissioning by providing design expertise. Coordinate with contractors during installation to ensure adherence to design. Complete required engineering documentation including DFMEA, Panel Heat Loads, Safety Risk Assessments, Motor Sizing Calculations. Qualifications Bachelor's degree in electrical engineering or related field. 5+ years of experience in industrial control system design. Proficiency in AutoCAD Electrical or similar tools. Knowledge of industrial networks (EtherNet/IP, Modbus). Strong understanding of safety standards and compliance requirements. Travel: 30% - 50% Preferred Skills Experience with UL panel design and CE compliance. Familiarity with motion control and robotics integration. Ability to manage multiple design projects simultaneously. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Plymouth - 46247 Req ID: 27952 Job Summary We are seeking an Industrial Controls Engineer specializing in PC, PLC and HMI programming for custom machinery projects. This role focuses on developing, testing, and commissioning control logic and operator interfaces to ensure optimal machine performance. The ideal candidate will have strong programming skills and experience integrating automation components. Key Responsibilities Create source code for PC base industrial control systems. Design and program PLC logic for custom machinery (Rockwell/Allen-Bradley preferred). Develop HMI interfaces for operator interaction. Test and debug control programs to ensure reliability. Integrate motion control systems, sensors, and safety devices. Support on-site installation and commissioning of programmed systems. Troubleshoot and resolve programming issues during build and post-installation phases. Maintain software documentation and version control. Coordinate with contractors during installation for programming adjustments. Qualifications Bachelor's degree in electrical engineering or related field, or equivalent experience. 5+ years of experience in PLC and HMI programming. Proficiency in Rockwell Studio 5000 and FactoryTalk View, or Siemens TIA Portal. Knowledge of industrial communication protocols (EtherNet/IP, Modbus, ProfiNET). Strong troubleshooting and debugging skills. Travel: 30% - 50% Preferred Skills Experience with robotics and motion control programming. Familiarity with safety PLCs and advanced diagnostics. Ability to work independently and manage multiple programming tasks. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Engineering Req ID: 26318 Summary Fori Automation, LLC, a Lincoln Electric Company, is a global supplier of welding, assembly, material handling, and testing equipment for automotive and non-automotive customers worldwide. Fori Automation focuses on delivering cost-effective, highly engineered products and systems designed and manufactured globally with localized sales, project management, and service. We are seeking an experienced Controls Engineer for our Shelby Township, MI site with a background in industrial software development. The Controls Engineer will initially support active projects and then transition to completing projects directly. They will take the lead on developing software on new projects and debug software on new machines. This role requires travel to customer sites for equipment installation and customer interaction. What You Will Do: Design PLC software and HMIs for industrial automation equipment Debug and troubleshoot PLC software and HMIs Collaborate with cross-functional teams to maintain project timelines and critical path milestones. Maintain task lists and reports of open items. Maintain project design documentation and prepare customer deliverables. Ensure the controls engineering process is tracked and followed. Assist customers and local tradespeople in troubleshooting equipment issues. Conduct end-user training on equipment operation. Required Experience and Education Electrical engineering degree preferred; mechatronics degrees will also be considered. Minimum of two years of experience as a Controls Engineer. Knowledge or education in electrical circuits, schematic reading, design, and troubleshooting. Experience with electrical CAD systems, such as AutoCAD Electrical and/or ePLAN Experience in design with Rockwell Logix 5000 or Siemens S7-1500 family processors. Experience in computer programming languages, such as VB, C/C++, or C# preferred. Experience with PLC programming in ladder and structured text. Experience programming HMIs (Rockwell and Siemens preferred). Proficiency in Microsoft applications, such as Word and Excel. Travel required: approximately 30% domestic and international. Weekend work may be required based on project schedules. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Plymouth - 46247 Req ID: 27951 Job Summary We are seeking an entry-level Industrial Controls Engineer focused on PC, PLC, and HMI programming for custom machinery projects. This role provides training and mentorship to develop programming skills for automation systems, including PC control, PLC logic and HMI interfaces. Ideal for recent graduates passionate about coding and industrial technology. Key Responsibilities Participate in commissioning equipment with supervision. Help test and debug control programs. Contribute to code creation for PC base controls systems. Assist in programming under guidance of senior engineers. Support development of HMI interfaces for operator interaction. Maintain documentation for software and version control. Collaborate with team members and contractors during installation. Qualifications Bachelor's degree in Electical Engineering or related field or equivalent experience 0-1+ years of experience Basic knowledge of programming concepts. Strong interest in automation and programming. Familiarity with Rockwell Studio 5000 or willingness to learn. Travel: 30% - 50% Preferred Skills Strong problem-solving and analytical skills. Exposure to industrial communication protocols. Coursework or internship experience in PLC/HMI programming. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Powell is a dynamic and innovative company that values collaboration, technical excellence, and professional growth. As an Electrical Engineer, you will elevate your career and make a significant impact by leading projects that craft cutting-edge solutions for diverse clients. At Powell, an Electrical Engineer holding a minimum of a bachelor's degree in electrical engineering, or a related engineering discipline with a focus on power, will be the “technical face” on projects from concept to completion. You will be working with clients to design custom Low and Medium Voltage Switchgear & Control Solutions to meet their technical specifications and quality standards within the constraints of the budget and the schedule. Additionally, an Electrical Engineer will learn industry standards and trends. Finally, you will join a team that fosters a supportive environment, continuous learning and development where your expertise will not only be appreciated but recognized and rewarded. Essential Responsibilities Design standard jobs with guidance to match client specifications and requirements Draft electrical construction drawings using AutoCAD in conjunction with our in-house mechanical and wiring teams Gain design knowledge to engineer 480V through 5kv Motor Control, and 480V through 38kV Switchgear along with other miscellaneous equipment Work with your Supervisor and the Project Management team to help interpret project write-ups, client specifications, drawings, and other correspondence during the life of the project Create and validate Bills of Materials for client submittal and approval per Powell Standards Complete self-design reviews to verify accuracy and completeness of designs before issuing projects to Powell's manufacturing floor for construction Gain the ability to provide technical support in client meetings Coordinate with purchasing and suppliers to specify & approve component parts and assemblies Provide prompt notification to supervisor and project management for issues that impact scope, budget, and schedule Coordinate with the electrical design team, and the mechanical engineering team for the final design and construction package to include wiring diagrams, one-line diagrams, three-line diagrams, control schemes, and mechanical layouts of the project Create AC and DC schematics, door component layouts, wiring diagrams, and one-line diagrams for project approval, construction and As-Built's drawing submittals Provide technical support as necessary for sales, application engineering, and inspection teams throughout the life of the project Assist fellow production engineers in solving problems on a daily basis Adhere to Powell's policies and procedures, work instructions, ISO policies, Safety Rules and Regulations Meet regularly with clients, suppliers and OEMs Required Experience Is Proportionate With the Selected Job Level The Engineer level requires a Bachelor's degree in an engineering discipline and 0-3 years of relevant job related experience The Senior Engineer level requires a Bachelor's degree in an engineering discipline and 4-8 years of relevant job related experience The Lead Engineer level requires Bachelor's degree in an engineering discipline and 7-10 years of relevant job related experience Minimum Qualifications BS Degree in Electrical Engineering, Electrical Technology or related area Minimum 1-3 years of experience in an Engineering role Ability to draft in AutoCAD Proficient with electrical design and circuitry Basic understanding of power system and relay applications as applied to products Preferred Qualifications Master's degree in Electrical Engineering preferred Skills, Abilities & Other Requirements Ability to manage & prioritize multiple projects, schedules and budgets in a fast-paced environment Solid organization, communication, presentation and planning skills Ability to carry out engineering development types of tasks and address production issues Demonstrated ability to work collaboratively with others in a cross-functional team environment Strong problem-solving skills, and the ability to troubleshoot system-level problems Basic understanding of one-line and three-line drawings, control schematics, and point to point wiring diagrams Basic understanding to being very proficient with power distribution equipment (three phase systems, relays, transformers, control switches, etc.) Basic knowledge of 480V through 38kV electrical distribution and switchgear operation Able to apply applicable sections of the National Electric Code and other codes and standards such as IEEE, ANSI and UL in day-to-day activities Able to form and apply cost competitive techniques to develop the most cost-effective solution for the engineered to order product Possess a strong customer service commitment Basic understanding to being very proficient at drawing reviews (i.e., acquired knowledge of specification items that Powell should take exception to and specification items that require special attention; able to accurately interpret client specifications, etc.) Working & Environmental Conditions The employee typically performs duties in a normal office environment. There will be some work in a shop environment and exposure to the elements of our shop. Additionally there may be some work performed in the field with exposure to construction sites or active customer facilities. It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand; talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties #LI-BH3 In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact ************. Application status inquiries will not be accepted in this manner.

A Senior Electrical Engineer is responsible for designing, developing, and testing electrical systems and equipment. They oversee projects, provide technical expertise, and ensure compliance with industry standards and regulations. They may also collaborate with other engineers and professionals to solve complex electrical problems, conduct research, and implement innovative solutions. A Senior Electrical Engineer typically has extensive experience in electrical engineering and may supervise and mentor junior engineers in their team. Essential Responsibilities Independently complete standard projects to match client specifications and requirements Draft electrical construction drawings using AutoCAD in conjunction with our in-house mechanical and wiring teams Apply design knowledge to engineer 480V through 5kv Motor Control, and 480V through 38kV Switchgear along with other miscellaneous equipment Work with the Project Management team to help interpret project write-ups, client specifications, drawings, and other correspondence during the life of the project Create and validate Bills of Materials for client submittal and approval Complete self and peer design reviews to verify accuracy and completeness of designs before issuing projects to Powell's manufacturing floor for construction Mentor junior engineers in their team Provide technical support in client meetings Coordinate with purchasing and suppliers to specify & approve component parts and assemblies Provide prompt notification to supervisor and project management for issues that impact scope, budget, and schedule Coordinate with the electrical design team, and the mechanical engineering team for the final design and construction package to include wiring diagrams, one-line diagrams, three-line diagrams, control schemes, and mechanical layouts of the project Create AC and DC schematics, door component layouts, wiring diagrams, and one-line diagrams for project approval, construction and As-Built's drawing submittals Provide technical support as necessary for sales, application engineering, and inspection teams throughout the life of the project Assist fellow production engineers in solving problems on a daily basis Adhere to Powell's policies and procedures, work instructions, ISO policies, Safety Rules and Regulations Meet regularly with clients, suppliers and OEMs Required Experience Is Proportionate With the Selected Job Level The Engineer level requires a Bachelor's degree in an engineering discipline and 0-3 years of relevant job related experience The Senior Engineer level requires a Bachelor's degree in an engineering discipline and 4-8 years of relevant job related experience The Lead Engineer level requires Bachelor's degree in an engineering discipline and 7-10 years of relevant job related experience Minimum Qualifications BS Degree in Electrical Engineering, Electrical Technology or related area Minimum 4-8 years of experience in an Engineering role Advanced drafting/ACAD skills Proficient in electrical SWGR design and control schemes. Proficient in understanding power systems and relay applications as applied to switchgear products Skills, Abilities & Other Requirements Ability to manage & prioritize multiple projects, schedules and budgets in a fast-paced environment Solid organization, communication, presentation and planning skills Experience in carrying out engineering development types of tasks and addressing production issues Demonstrated ability to work collaboratively with others in a cross-functional team environment Highly self-motivated in working on “first-of-its-kind” projects that require resilience and tenacity Strong problem-solving skills, and the ability to troubleshoot complex system-level problems Solid understanding of one-line and three-line drawings, control schematics, and point to point wiring diagrams Familiarity with power distribution equipment (three phase systems, relays, transformers, control switches, etc.) Good understanding of 480V through 38kV electrical distribution and switchgear operation Familiar with applicable sections of the National Electric Code and other codes and standards such as IEEE, ANSI and UL Able to form and apply cost competitive techniques to develop the most cost-effective solution for the engineered to order product Possess a strong customer service commitment Proficient at project specification and drawing reviews (i.e., acquired knowledge of specification items that Powell should take exception to and specification items that require special attention; able to accurately interpret client specifications, etc.) Working Conditions The employee typically performs duties in a normal office environment. There will be some work in a shop environment and exposure to the elements of our shop. Additionally, there may be some work performed in the field with exposure to construction sites or active customer facilities. It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand; talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties #LI-BH3 In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact ************. Application status inquiries will not be accepted in this manner.

At Ouster, we design and manufacture LIDAR sensors for precision mapping, robotics, automotive, security systems, smart cities and various industrial solutions.. We've transformed LIDAR from an analog device with thousands of components to an elegant digital device powered by one chip-scale laser array and one CMOS sensor. The result is a full range of high-resolution LIDAR sensors that deliver superior imaging at a dramatically lower price. If you're motivated by solving big problems, we're hiring key roles across the company and need your help! The Role: We're seeking a proactive and skilled engineer who thrives in a dynamic, fast-paced environment to be an integral part of our San Francisco hardware team. What You'll Do: Contribute to the design, simulation, and optimization of complex electrical systems and circuits for cutting-edge industrial and automotive LIDAR applications. Drive component selection, schematic capture, and PCB layout, ensuring optimal signal integrity, power integrity, EMC/EMI performance, and manufacturability (DFM). Hands-On bring-up and debugging of prototype hardware, efficiently identifying and resolving electrical issues. Collaborate closely with firmware, mechanical, optical, and software engineering teams to ensure robust design and seamless system integration and performance. Document and execute comprehensive engineering verification and validation (EVT) test plans that operate within design parameters and meet product requirements. What You'll Bring (Basic Qualifications): Bachelor of Science in Electrical Engineering (BSEE) with 3+ years of experience, OR Master of Science in Electrical Engineering (MSEE) with 1+ years of experience in relevant hardware product development (e.g., industrial, automotive, robotics, etc). Understanding of hardware evaluation methodologies, including development of test cases/suites, performance monitoring, test automation, and data analysis. Familiarity with test equipment such as oscilloscopes, logic analyzers and data acquisition systems. Solid understanding and practical experience in high-speed digital and analog circuit design, signal integrity, power delivery, and noise suppression techniques. Proficiency with processor architectures, digital logic, and common communication interfaces (e.g., I2C, UART, SPI, USB, MIPI, Ethernet). Experience driving the full design cycle: from schematic capture and PCB layout (Cadence, Altium, or similar) through to assembly and validation. Bonus Points: Experience in a high-volume manufacturing environment. Familiarity with automotive qualification processes and standards (e.g., AEC-Q100/200). Knowledge of Python or other scripting languages for test automation. A Note on Experience: We acknowledge the confidence gap at Ouster. You do not need to meet all of these requirements to be the ideal candidate for this role. We encourage you to apply if you believe you have the skills and passion to succeed. The base pay will be dependent on your skills, work experience, location, and qualifications. This role may also be eligible for equity & benefits. ($91,000-$130,000) We acknowledge the confidence gap at Ouster. You do not need to meet all of these requirements to be the ideal candidate for this role. Ouster is an Equal Employment Opportunity employer that pursues and hires a diverse workforce. Ouster does not make employment decisions on the basis of race, color, religion, ethnic or national origin, nationality, sex, gender, gender-identity, sexual orientation, disability, age, military status, or any other basis protected by local, state, or federal laws. Ouster also strives for a healthy and safe workplace, and prohibits harassment of any kind. Pursuant to the San Francisco Fair Chance Ordinance, Ouster considers qualified applicants with arrest and conviction records for employment. If you have a disability or special need that requires accommodation, please let us know. #J-18808-Ljbffr

Responsibilities and Measurement Criteria with Time investment Needed on Each: (This will describe the overall core responsibilities of the role, decision making responsibilities etc.) Design and development of UPS subsystems/components in compliance with specifications, EMC/EMI requirements, and applicable standards. PCB design. Detailed analysis of UPS electronic subsystems/components, focusing on performance evaluation, design optimization, component selection and sizing, and control strategy. Collaboration in an interdisciplinary engineering environment (with embedded, test, and mechanical engineers) to define requirements, discuss trade-offs, participate in design verification, and ensure successful integration of single-phase UPS designs. Continuous improvement of existing designs, evaluation of application issues, and resolution of those issues in the design of new products. Evaluation of new technologies to enhance and implement them in new R&D systems and processes. Adherence to agreed-upon project timelines. Preparation of relevant technical reports. Qualifications: Required/ Minimum Qualifications: Master's degree or higher in Electrical Engineering with a focus on power electronics. Proficiency in medium-to-low power circuit topologies, principles of power electronic converters, and semiconductor devices. Additional / Preferred Qualifications: - Hands-on experience with PCB design and layout. Knowledge of electronic design practices for EMC compliance. Strong analytical skills combined with excellent problem-solving abilities and interpersonal communication. Experience in UPS and power module development is highly desirable. Physical & Environmental Requirements: - (To be used majorly for manufacturing jobs.) None Time Travel Needed: 10% OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to . If you are interested in applying or learning more about this role, please visit the company's career page located on Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.

Fathom Recruitment has teamed up with C-Motive to bring you another great opportunity! Are you a motor controls expert looking for an opportunity to innovate and put your hands on a world-changing technology? C-Motive, a startup in Middleton, Wisconsin, is seeking a Motor Controls Engineer to join our rapidly expanding team. In this newly created role, you would assist C-Motive in commercializing a patented electrostatic motor technology with a focus on sustainability and efficiency. This technology, which was developed at UW-Madison, is projected to be the first of its kind on the market and has the potential to save a gigaton of carbon in the next decade. The Motor Controls Engineer will be responsible for architecting and developing the control systems for C-Motive's electrostatic motor drives. This role requires a strong background in linear systems analysis and controller design, along with proficiency in tools like MATLAB/Simulink. With this role, you will have the opportunity to collaborate with hardware and software teams to integrate motor control solutions into larger motor/drive systems. What you will do: Develop control algorithms, write embedded firmware in C/C++, and create simulation models. Perform bench and in-vehicle testing and troubleshoot system issues. Write, test, and debug embedded C/C++ code for motor controllers and Electronic Speed Controllers (ESCs). Develop performance models in MATLAB/Simulink to simulate and analyze motor and system performance. Who you are: A master's or PhD in electrical engineering/computer science with an emphasis on machine and power electronics control systems is required. The ideal candidate will have at least 10 years of experience in high-performance motor and/or multilevel power converter control systems. A strong understanding of AC and DC motor types, drive systems, and control theory is necessary. Experience with PID loop control strategies and knowledge of PWM (Pulse Width Modulation) schemes are important. The candidate should have hands-on experience with closed-loop vector control, whether sensor-based or sensorless. Past design experience implementing motor control strategies for various motor types, such as Fuzzy Logic Control (FLC) or Field-Oriented Control (FOC), is also desired. Why work with us: C-Motive offers a generous benefits package, including a "take-what-you-need" paid time off program, paid parental leave, a 401k program, and stock options. The company is an equal opportunity employer committed to creating an inclusive and diverse environment. Relocation assistance is also available. Our complete job description can be found HERE Fathom Recruitment and our clients adhere to an equal employment opportunity policy. All candidates are referred based on their qualifications only, without regard for their race, sex, age, religion, national origin, sexual orientation, marital status, veteran status, or any other protected class or characteristic.

A technology company based in San Francisco seeks a Senior Hardware Systems Engineer to lead design and development of innovative hardware products. This hybrid role requires collaboration with cross-functional teams and expertise in systems design. The ideal candidate has over 5 years experience in high-volume hardware programs and a degree in Electrical Engineering. Competitive salary between $165,750 to $224,500 USD and relocation assistance provided. #J-18808-Ljbffr

Resonant is a fast-moving tech company developing breakthrough RF chip technology for the smartphone in your pocket. As part of Murata, the #1 manufacturer of acoustic-wave filters, we are creating the next generation of filters for 5G, 6G, and Wi‑Fi applications with our proprietary XBAR technology. Resonant combines proprietary software development, unique 3D physical modeling, world‑class filter design, and massive cloud compute, creating a diverse and dynamic work environment. Come join us in reinventing the RF Front‑End! Why Consider This Job Opportunity As a Senior Staff RF Filter Designer, you will lead the development of advanced filter solutions from concept through high‑volume manufacturing. You'll play a key role in integrating cutting‑edge design methodologies and collaborating across RF design, technology, and software teams to drive innovation in acoustic technologies. Your expertise will be instrumental in delivering high‑performance RF filters for mobile devices, leveraging deep technical knowledge and cross‑functional coordination to solve complex, high‑impact challenges. This is a unique opportunity to influence product direction, contribute to strategic initiatives, and make a meaningful impact within a fast‑paced, forward‑thinking organization. Workplace Policy Hybrid from San Mateo, CA What To Expect (Essential Job Responsibilities) Develop RF filters using cutting‑edge technologies for new applications. Apply commercial circuit analysis and physical modeling tools as well as custom software packages to design and analyze RF filters. Analyze RF test data and translate insights into design improvements. Guide technology and software roadmaps by presenting technical findings and strategic recommendations to cross‑functional teams. Lead cross‑functional projects, ensuring alignment with organizational objectives and communicating milestones. Provide technical leadership and mentorship, guiding junior engineers and fostering a culture of innovation, collaboration, and continuous improvement. What Is Required (Qualifications) Master's or PhD degree in Electrical Engineering or a related field. 10+ years of experience in RF or analog design, with a strong background in filter technologies. Proven leadership in technical projects and cross‑functional collaboration. Strong communication and technical writing skills. Ability to thrive in dynamic, fast‑paced environments and make high‑impact decisions under minimal supervision. Strong leadership presence with a track record of mentoring and developing engineers. How To Stand Out (Preferred Qualifications) Proficiency in advanced circuit simulation (ADS or AWR). Depth of experience with EM modeling software (HFSS). Strategic oversight of schematic capture and PCB layout processes. Comprehensive knowledge of RF/Microwave measurement methodologies, including mastery of VNA and spectrum analyzer. Advanced programming capabilities (MATLAB, Python). Travel Domestic travel between California offices is required. Infrequent International travel is required. Comprehensive benefits package including medical, dental, and vision insurance. Generous Paid Time Off including paid holidays and floating holidays. 401(k) employer match on retirement planning. Hybrid working schedule for eligible positions. Tuition reimbursement on approved programs. Flexible and health spending accounts. Other Minimum Salary: $120,000 Maximum Salary: $260,000 We consider various factors in determining actual pay including your skills, qualifications, experience and location. In addition to salary, this position is eligible for incentive awards based on individual and business performance as well as competitive benefits. Equal Opportunity/Affirmative Action Employer - M/F/Disabilities/Veterans Location: San Mateo, CA, US, 94402 Nearest Major Market: San Francisco Nearest Secondary Market: Oakland #J-18808-Ljbffr

A global technology company is seeking a Staff Logic Design Engineer in Milpitas, CA. The candidate will architect and implement high-performance digital logic for protocol analysis on FPGA-based systems, requiring 7+ years of experience in digital logic design and strong proficiency in Verilog/SystemVerilog. This role offers a competitive salary range of $141,900.00-$189,200.00 and requires collaboration with cross-functional teams to deliver innovative solutions. #J-18808-Ljbffr

The Project Engineer in this role is responsible for planning, developing, coordinating, and managing onsite construction engineering activities for large, extensive projects in the heavy civil/power construction industry, encompassing grading, clearing, and site development. Essential Duties and Responsibilities: Track project quantities Generate project billing. Initiate and negotiate change orders. Generate CAD drawings and present solutions to owners for design problems that arise in the field. Review plan changes Assist with work plans. Assist with project schedules. Manage submittal data. Manage material purchase orders. Manage and negotiate subcontracts. Assist in division field personnel management. Assist field personnel in any capacity to handle any problems that may arise. Work with Project Superintendents, Foreman, and Crews to perform work more effectively. Attend pre-construction meetings. Requirements: Must be willing to relocate. Strong organizational skills Strong work ethic Able to multitask and work independently under pressure and tight deadlines. Education and Experience: Four-year engineering degree or equivalent technical training and related experience Excellent communication and interpersonal skills Demonstrated ability to manage a team of varied disciplines. Candidates that accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam is essential to ensure that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process.

A financial technology company in San Francisco is seeking a Principal Engineer to lead the technical direction of their lending platform. The successful candidate will drive the technical vision, ensure system performance, and collaborate across teams to achieve business goals. A background in software engineering and experience with fintech systems are essential. Competitive compensation and benefits are offered, along with a commitment to diversity and inclusivity in the workplace. #J-18808-Ljbffr

We are a leading manufacturer of precision measurement and testing equipment, and we are looking for a Controls Hardware Engineer to join our growing team. If you enjoy designing, detailing, and seeing your work come to life in real machines, we want to hear from you! Who We're Looking For: 2+ years of experience designing industrial control systems, preferably for custom machinery or automation systems Proficient in EPLAN (preferred) and/or AutoCAD Electrical for control panel and schematic design Experience designing electrical, pneumatic, hydraulic, and other power delivery systems Familiar with UL, NFPA79, or IEC standards for industrial control panels Comfortable collaborating with mechanical and software teams during the machine design lifecycle Experience with machine wiring, hardware selection, and bills of material is a plus Knowledge of PLCs, HMIs, sensors, and VFDs is helpful but not required Preferred (but not required): Technical degree in Electrical Engineering, Mechatronics, or similar Experience supporting machine builds or troubleshooting wiring in the field Exposure to machine safety design, lockout/tagout systems, or risk assessments Job Duties: Design control panels, schematics, and system layouts using EPLAN (preferred) and/or AutoCAD Electrical Create electrical, pneumatic, and hydraulic diagrams to support custom machine builds Select components including fuses, breakers, relays, valves, and sensors based on application and standards Collaborate with mechanical and controls engineers to ensure seamless system integration Provide support during machine builds, wiring checks, and commissioning Maintain up-to-date documentation and BOMs throughout the project lifecycle What We Value: Precision and clarity in your design work Practical understanding of how systems are built and wired on the shop floor Proactive problem-solving and attention to detail Clear communication with team members and vendors Pride in delivering reliable, build-ready documentation Why You'll Like Working Here: Small, skilled team where your contributions matter Interesting, custom machine projects-not the same thing every day Opportunity to grow into system-level design or multi-disciplinary engineering Apply Today! Send your resume - and if you have a sample drawing set or project portfolio, even better. We'd love to hear about the machines and systems you've helped bring to life.

We are Generac, a leading energy technology company committed to powering a smarter world. Over the 60 plus years of Generac's history, we've been dedicated to energy innovation. From creating the home standby generator market category, to our current evolution into an energy technology solutions company, we continue to push new boundaries. The Staff Engine Design Engineer - Architect plays an important role in advancing the design and performance of internal combustion engines (ICE), through engine design, data-driven analysis, simulation, and design of system components. This position leverages Creo, Python, and advance calculation tools to optimize system behavior, improve engine design and product reliability, and increase engine performance across a range of gaseous fueled applications. Essential Duties and Responsibilities: Design engine systems and components for using design reviews, calculations, problem solving, and simulation input to support overall engine and generator design. Evaluate the engine and systems designs relative to performance and emissions. Conduct system analysis using calculations to aid in optimizing the peak and reliability performance of the engine/generator. Interpret testing results and collaborate with cross-functional teams through design reviews and technical discussions to guide product development. Contribute to the development of engine workflows and analysis best practices to improve group efficiency and accuracy. Document project objectives, methods, and results using standardized reporting formats. Apply data analysis techniques, including Matlab/Simulink or Python-based scripting, and machine learning to support predictive modeling and performance forecasting. Stay informed on relevant technologies, tools, and industry trends to support continuous improvement. Minimum Qualifications: Bachelor of Science Degree in Mechanical or Electrical Engineering or related discipline 7+ years of relevant work experience Knowledge, Skills and Abilities: Experience in an Automotive, Design, or a related engineering discipline. Hands-on experience with engine and engine component design. Experience in powertrain design and analysis - CREO or similar. Hands-on experience with FEA as applied to engine design. Broad experience in new IC engine design using Creo or equivalent. Ability to create design for internal combustion engines, including cases, heads, valvetrain, rotating assembly, belt drives, exhaust systems, and intake systems. History in designing, testing, and integration of complex components and evaluation of overall effectiveness, cost (including cost/benefit analysis), reliability (risk analysis), and safety. Designs, develops, executes, and evaluates design, product specifications, process validation plans, and testing for a variety of complex products and/or components. Ability to perform detail-oriented work with a high degree of accuracy on multiple projects. Good knowledge of internal combustion engine performance design and specification. Analytical and problem-solving skills, with a deep understanding of internal combustion engine design, operation, and testing. Written and verbal communication skills with the ability to clearly interpret and present complex simulation results to technical and non-technical audiences. Collaborate with internal manufacturing partners, contract manufacturers, designers, and product specialists to optimize complex and advanced designs for performance. Preferred Qualifications: Comprehensive knowledge of internal combustion engines and effective engine design methods. Experience with FEA. Extensive Experience with internal combustion engine performance development and specification. Demonstrated written communication and presentation skills. Ability to apply engineering knowledge and experience to improve products, services and processes. Data analysis and control/diagnostic feature creation skills. Familiarity with systems engineering based problem solving. Proven ability to work well with others as part of a diverse global team. Physical Demands: While performing the duties of this job, the employee is regularly required to talk and hear; and use hands to manipulate objects or controls. The employee is regularly required to stand and walk. On occasion the incumbent may be required to stoop, bend or reach above the shoulders. The employee must occasionally lift up to 25 - 50 pounds. Specific conditions of this job are typical of frequent and continuous computer-based work requiring periods of sitting, close vision and ability to adjust focus. Occasional travel. “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability status, protected veteran status, or any other characteristic protected by law.”