General assembler-installer jobs near me

ReBath is looking to hire a detail-oriented carpenter with remodeling or construction experience to join our growing organization as an Installer. Plumbing experience is a plus. If your skills and customer service levels are outstanding and we would like to hear from you. Re-Bath is the exclusive bathroom remodeler for the TWO largest home improvement retailers in the USA. We have a presence in over 160 stores throughout Ohio, Pennsylvania, and Indiana. We are experiencing double digit growth and are looking to add quality people to our team. Rewards and Benefits for our Installers: High level of compensation for the right candidate. $52K - $100K+ Vehicle with fuel expense is provided for experienced carpenters after their training period Health, Dental and Disability insurance available with partial contribution 401k Requirements of Installer: High level of skill in the remodeling or construction fields Able to pass a background, drug test and have a clean driving record Self-starter with a positive customer-oriented attitude Responsibilities of Installer: Project manage and install each job provided with a high level of quality Follow company policies and procedures Be able to follow all company installation processes and procedures We want you on our team if you've done some or all of the following: Bathroom and/or kitchen remodeling Trim carpentry Plumbing Tile installation Drywall hanging and finishing work Exterior finishing work ReBath has been part of Western PA and Ohio since 1990 and the national company was started in 1979. Since then, we have grown to the largest bathroom remodeling company nationally. A focused marketing plan and key retail partnerships provide a steady stream of opportunity for our business to grow. Join the best team in remodeling business. This is an employee position, not 1099. Job Type: Full-time Pay: $52,000.00 - $100,000.00 per year' ' Benefit Conditions: Waiting period may apply Only full-time employees eligible Job Duties: Managing peers (dividing job tasks, working as a team) Knowledge of methods, tools, and equipment used in carpentry Type of work: Construction Work Location: Multiple locations Work Remotely No Job Type: Full-time Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Work Location: On the road

Working at Freudenberg: We will wow your world! Responsibilities: Test Qualifications: Test The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law. Freudenberg Residential Filtration Technologies Inc.

Currently, we are seeking qualified candidates to join our Production Team as an Assembler on Afternoon Shift, in our Marion, Ohio manufacturing facility. The Marion, Ohio plant is the world's largest manufacturer of clothes dryers. Do you want to share your ideas in an innovative environment? Do you learn quickly in a continuous improvement atmosphere? Does the term lean manufacturing excite you? Do you have a great work ethic? These are full-time positions with no temporary agencies involved. As an associate, you will need to be able to work in a fast paced, high-speed environment, follow standardized work, and adhere to safe work practices in a continuous improvement environment. Whirlpool offers full-time employees an excellent wage and benefits package, including Health/Dental/Vision/Prescription Drug Plan, 401K, Life Insurance, 12 Paid Holidays, Paid Time Off, Tuition Reimbursement, and much more. * The starting wage is $20.25 per hour + shift premium; with time, ability to progress up to $25.70+ per hour * Paid time off (PTO) up to 120 hours in the first year (prorated on start date) * Benefits on day one (medical, dental vision) * Must have ability to work 2nd shift The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions: * Continuously stand or walk (up to 12 hours per day) * ability to reach (over shoulder), twist/turn, push/pull, bend, squat, and lift up to 35lbs frequently * Work on a moving/conveyor style production line or stabilized workstation * Assemble and install parts by hand or using tools/equipment. * Crating and packaging of materials, parts, products etc. Minimum Requirements * 1-years of consistent work history * Must be at least 18 years of age * Possess a high school diploma or GED; * Be subject to and successfully pass a pre-employment drug screen and background check. * Motivated to work as a team player who takes ownership of their work in a safety-minded environment * Must provide a resume Preferred requirements: * 3-months of manufacturing or distribution experience (consecutive) * Associates Degree Whirlpool Corporation (NYSE: WHR) is the number one major appliance manufacturer in the world, with approximately $21 billion in annual sales, 97,000 employees and 70 manufacturing and technology research centers. The company markets Whirlpool, KitchenAid, Maytag, Consul, Brastemp, Amana, Bauknecht, Jenn-Air, Indesit and other major brand names in nearly every country throughout the world. We stay true to our philosophy that says good business begins by not following but leading. Our brands and products help people make the most of time so they can focus on making the most of moments that matter. At Whirlpool Corporation, we believe that all people matter. Celebrating diversity and including thousands of perspectives empower us to create products that blend into every concept of home. Whirlpool Corporation is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Additional information about our company can be found at ***************************** Follow us on LinkedIn or join the conversation @ HYPERLINK "********************************** HYPERLINK "********************************** HYPERLINK "*********************************

Description: Transformer Assembler Recommended Pay Rate Range: $19.00 - 20.00/HR Work Days/Hours: 6: 00am to 3: 30pm Daily and Sat O/T possible depending upon client demand The position of Transformer Assembler is responsible for the assembly the transformer unit and works closely with Engineering and plant management. Key Responsibilities: •Cuts steel to size (within + or - .002) •Assembles transformers •Stacks laminated steel to form cores •Completes transformer assembly by inserting coil and finishing stacking •Operate tools and machinery;Transformer Test Equipment, Ratchet Gun, Strip Cutting Machines, Air Tools, Band Saw, various Hand Tools, Belt Sander, Hoist, Shears •Follows all company policies including but not limited to, safety, attendance, breaks, etc •All other duties as assigned •Must be able to work overtime when warranted Minimum Qualifications: High School diploma or equivalent. Four years'experience working in a similar position. Desired Qualifications: •Be safety conscious •Possess experience and knowledge in basic electronics •Possess excellent mechanical ability •Ability to read and write in English •Ability to speak effectively with other employees •Ability to lift 50 lbs. •Able to read and use measuring devices including but not limited to: oRule in increments of tenths and hundredths of an inch oRule in increments of fractions of an inch oMicrometer in increments of thousandths of an inch oCalipers in increments of thousandths of an inch •Able to read work instructions and apply them to specific work types •Able to read supplied specification sheets and apply the data to specific work types Physical Requirement Medium work: Exerting up to 50 pounds of force occasionally and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Stooping: Bending body downward and forward by bending spine at the waist. This factor is important if it occurs to a considerable degree and requires full use of the lower extremities and back muscles. Crouching: Bending the body downward and forward by bending leg and spine. Reaching: Extending hand(s) and arm(s) in any direction. Standing: Particularly for sustained periods of time. Fingering: Picking, pinching, typing or otherwise working, primarily with fingers rather than with the whole hand or arm as in handling. Grasping: Applying pressure to an object with the fingers and palm. Feeling: Perceiving attributes of objects, such as size, shape, temperature or texture by touching with skin, particularly that of fingertips. Hearing: Perceiving the nature of sounds at normal speaking levels or without correction. Ability to receive detailed information through oral communication, and make fine discriminations in sound. Repetitive Motions: Substantial movements (motions) of the wrists, hands, and/or fingers. Talking: Expressing or exchanging ideas by means of the spoken word. Those activities in which they must convey detailed or important spoken instructions to other workers accurately, loudly, or quickly. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties and responsibilities.

$500 Sign-On Bonus! Telamon is a leading provider of connectivity integration, implementation, and distribution solutions for many of the world's most recognized telecommunications, transportation and consumer brands. Founded in 1985, we are a minority-owned company headquartered in Carmel, Indiana, and maintain a global footprint with locations in North America, Europe, and Asia. This work isn't easy-and that is exactly why we do it. Telamon thrives when we're solving problems that help enhance connectivity and lead to simplicity, safety, and reliability in everyday life. We are cultivating deeper connections with every bond we forge: a more comprehensive network that serves the world around us-inside our walls and out. Learn more at telamon.com Classification: non-exempt/hourly Location: traveling in Southern California region Pay Range: $31-$35/hr Benefits: Telamon invests in our people with benefits that support health, family, and future. We offer a comprehensive benefits package that includes: Health & Wellness: Medical, dental, vision, HSA with company match, dependent care FSA, life & disability coverage, voluntary plans, legal/ID protection, pet insurance, EAP Financial: 401(k) with company match, annual bonus based on company performance, referral bonuses, discounts, phone allowance; field roles: travel pay, per diem, company-paid lodging, and company vehicle (if applicable) Time Off & Flexibility: Flexible PTO for salaried roles; starting at 15 days (PTO with 2 floating holidays) for hourly roles; paid holidays, floating holidays, parental leave, bereavement leave, company-paid sabbaticals, and hybrid/remote options Career Growth: Tuition reimbursement, annual professional development grants, online learning resources, leadership programs, and internal growth opportunities Additional Benefits: Recognition programs, scholarships and educational stipends for children, company paid sabbaticals and company outings with access to local events. Note: benefits eligibility may be based on employment status, tenure, location, or other factors Job Summary: The Installer IV position is an experienced professional who independently executes complex field activities related to installing, maintaining, and servicing telecommunications equipment. This role requires extensive industry knowledge and the ability to guide less experienced installers. Essential Duties and Responsibilities Understands and follows Telamon's established safety practices and procedures. Properly use and maintain personal protective equipment (PPE). Perform additions, removals, and modifications on working equipment and circuits, including: Circuit modifications Software additions or upgrades Power transition work Addition or removal of batteries Addition or removal of circuits on working power distribution sources. Install, configure, and integrate telecommunication equipment such as switches, routers, fiber optics, and power systems in central office environments. Mount racks, frames, and shelves, ensuring all equipment is securely and correctly installed. Perform cable installation, termination, labeling, and lacing, adhering to industry standards. Properly test and troubleshoot fiber/copper installations. Perform power verification and power up equipment. Tests and evaluate systems to determine efficiency, reliability, and compatibility with existing systems. Conduct diagnostic tests on systems and equipment using tools like OTDRs, power meters, and spectrum analyzers. Maintains quality awareness and implements quality control processes. Performs in-process and final quality inspections. Reads and stays current on installation documentation. Successfully interpret drawings, plans, and specifications. Interpret the job plan and scope of work, as well as perform retrofits and upgrades for existing infrastructure. Make recommendations based on applicable codes, standards, and best practices. Discuss media selection and implications for implementation on the network. Resolves job specification and/or drawing problems. Marks/corrects office record drawings. Accurately document installation, testing, and maintenance activities, including as-built drawings and change logs. Executes the essential duties and responsibilities of Installer III, plus additional leadership duties. Provide work instruction to Level I, II, and III Installers; Provide work assignments to Level 1 and 2 Installers. May serve as Site Crew Leader. May perform as the installation in-charge person. Performs as the Installation in-charge person on Common Systems jobs as needed. Prepare Methods of Procedure (MOP). Write Job Information Memorandums (JIMs). Conducts work assignments, communicates, dresses, and assists customers in a professional manner. Coordinate with engineers, project managers, and other team members to align installation plans and schedules. Inventories all job-related material. Addition or removal of non-powered equipment/hardware. Addition or removal of wiring and connections (on non-working equipment only and switchboard cable only). Lead verification/continuity testing. Analysis of job specifications and drawings. Will provide guidance and training to less experienced Installers as requested or required. May perform the duties of a Level III or Level IV Installer when directly supervised by properly qualified personnel. Managerial Responsibility No direct reports but will provide guidance and oversight to less experienced installers on jobs. Travel/Shift Requirements Must be available to travel as much as 50% - 75% Travel may require overnight stays away from home for 1-2 weeks at a time, including weekends. Requires ability to work early morning shifts, occasional evening shifts and infrequent weekend work. Must have reliable transportation and be able transport minor job-related tools to work locations. Physical Demands Ability to lift a minimum of 50 lbs. and may be required to lift as much as 100lbs on occasion. Ability to work on ladders and in confined spaces. Work with and around electrical wires and ESD products in a safe manner. Ability to work onsite in central offices, construction, or installation sites. Requires fine motor skills and manual dexterity for gripping tools and assembling small components. Ability to stoop, kneel, bend, squat, lift, crawl, push, and pull. Skills and Abilities Required Proficiency in installing cables, racks, power systems, and grounding systems. Ability to perform equipment rack mounting, cable lacing, and termination. Demonstrate comprehensive knowledge of the installation process. Read, interpret, and understand technical drawings and documentation. Familiar with industry standards (AT&T TP-76300 / 76409 / Telcordia GR1275 / Verizon IP72202). Complete “Basic Installation” training course or equivalent on-the-job training. Successful completion of Safety, Business Code of Conduct, Quality Assurance, and Electrostatic Discharge (ESD) training. Strong analytical and troubleshooting skills to identify and resolve technical issues. Demonstrate meticulous attention to detail by executing installations accurately and ensuring full compliance with industry standards. Possess a good understanding of the phases of the installation process. Advanced knowledge of current network products. Ability to lead and direct less experienced team members to complete projects. Efficiently manage time to meet project deadlines. Aptitude and interest in technology with the ability to grasp and apply technical concepts. Proficiency operating computers, tablets, and MS Office software. Ability to effectively communicate with team members, supervisors, and other departments. Possess a valid driver's license with an acceptable driving record and proof of insurance. Track and record work hours on a timely basis using time-tracking software. Moderate knowledge of current network products. Basic knowledge of current network products. Good eye and hand coordination, manual dexterity, and precision to work well with a variety of hand tools. Education and Experience Required High School Diploma or Equivalency. 2 years of electronics training from a technical trade school or military. Minimum of 6 years of field service or equivalent combination of education and experience as determined by the Installation Manager or Director. Exceptions may be made for individuals who successfully completed the previous level in Telamon's Installer Academy Program. Demonstrate proficiency in relevant Network Elements (1, 2, 3, or 4). Experience leading, training, and motivating less experienced installers. Management assessment and approval of proficiency in Level IV Skills. Education and Experience Preferred 2 years of electronics training from a technical trade school or military. Telamon Corporation is an Equal Opportunity Employer and is committed to providing equal employment opportunities to all employees and applicants for employment. Telamon does not and will not discriminate against any applicant because of race, color, religion, age, national origin, disability, sex (including sexual orientation and gender identity), marital status, veteran or military status, or any other characteristic protected by law. Telamon Corporation makes all employment decisions in a non-discriminatory manner.

Are you looking to be part of something BIGGER? OBA, a Groundworks Company, offers competitive hourly pay + bonus paid per job, employee ownership, and a fast track to leadership positions. We're hiring Installers (Construction General Laborers) for our award-winning team in Obetz, OH! Why This Job Rocks: Growth Opportunities: Advance to Foreman in just one year, we promote from within over 80% of the time. Employee Ownership: Become an OWNER in 6 months - we invest in you! We Embrace Meritocracy - your hard work is rewarded. Award-Winning Culture: Join a Best Workplace - our core values are the foundation of our decisions and the essence of who we are. What We Provide: Pay: Competitive hourly pay + bonus paid per job ($40k-50k/yr average) Tools & Transportation: Provided & get a FREE pair of work boots each year! Year-Round Work: Full-time, nonseasonal, consistent work. Career Development: Clear career path, certifications & leadership training Benefits: Medical, Dental, Vision, Disability, Life insurance, 401(k) with match, 2 weeks PTO & 6 paid holidays! What We Expect: Contribute to our high-performance team, we WIN together! We work until it's done right. Period. Build open and honest relationships with communication. Embrace & drive growth. Get ready to grow your skills & your career. Deliver quality through great service. Be humble - We all put our boots on the same way. Protect, repair, and improve our customers' greatest asset - their home. What You Can Expect: Execute Construction General Labor duties Learn our business and grow your career Organize, carry and load heavy (up to 50lbs) job materials. Perform set-up and clean-up tasks on the job site. Dig and back-fill trenches/holes. Make repairs in crawl spaces (confined spaces), basements, and around home foundations. Perform work duties while exposed to the outdoor elements: extreme heat, extreme cold, rainy weather, etc. Valid driver's license preferred - for promotion. Groundworks is the leading provider of Foundation Repair, Crawl Space Encapsulation, Basement Waterproofing, and Concrete Lifting & Stabilization. With locations across the USA and Canada, Groundworks is the leading foundation solutions and water management company in North America! Recognized as a Top Workplaces USA™ company and offering employee ownership for everyone, we're building something that just can't be replicated. And we're on a mission to change an industry like never before! We're unique here at Groundworks. We are all connected through the same vision, mission, and values, and we are stronger together. We're proud to be the Groundworks Tribe! Our highly trained teams have decades of experience delivering innovative solutions, unmatched quality, and industry-leading warranties, helping homeowners everywhere protect and repair their most valuable asset - their home. When customers choose a local Groundworks company, they can feel confident they're hiring the trusted local experts who will ensure the job's done right. When you choose Groundworks, you'll join thousands of Tribemates who are making history.

RESPONSIBILITIES: Practice safe working habits and follow safety procedures, policy and Job Safety Analysis Ability to work towards continuous improvement of product quality Responsible for the assembly of products Responsible for quality and quantity of work, organization of work area and for all material Must support Continuous Improvement Responsible for the safety and training of others Responsible for compliance with all documented procedures and employee handbook Responsible for the quality and quantity of the finished product Responsible for creating and maintaining a working team environment Responsible for maintaining good housekeeping Responsible for performing routine preventative maintenance on associated equipment Responsible for safety, quality, and production with limited supervision Responsible for product data tracking Knowledge of continuous improvement a plus You must be willing to cross train and fill in as necessary in other dept Responsible for any other tasks as needed/assigned by Team Leader QUALIFICATIONS: Ability to lift to 60 pounds approximately 50% of the time Must be able to operate an overhead crane and be certified Need to follow safety guidelines Have good housekeeping skills and work as a team Must be able to read blueprints Must have mechanical abilities Must have good documentation skills

Job Description Assembly Technicians Needed in Columbus, Ohio A national company with a facility in the Columbus, Ohio area is currently seeking several Assembly Technicians for opportunities with their growing team. The position is a Direct Hire opportunity that offers long-term stable employment, opportunities for growth, and great benefits. Assembly Technicians rates are anticipated to start between $25 to $30 an hour based on each candidate's experience and education. All well-qualified candidates will be considered regardless of pay rate. We offer excellent benefits including great medical, dental, and Vision. Qualified Assembly Technicians will have most, if not all of the following skills and experience: 3+ years of experience with advanced mechanical assemblies, including fitting, alignment, and adjustment of components to close tolerances. Read and interpret blueprints, layouts, proficient with basic math, computer use, follow written instructions and perform with minimal supervision. Skilled with hand/power tools, measuring instruments, and basic fabrication skills preferred. Inspect parts and assist with final preparation for shipping. Prior manufacturing or mechanical assembly experience required; technical/vocational training preferred. Forklift and overhead crane experience. Must be able to work in the United States (No H-1 sponsorship or student visas considered). Must be able to complete standard pre-hire checks including background, drug screen, references, etc.

National Power, LLC is seeking a safety-conscious DC Installer (Levels 1-3) to join our critical infrastructure team. The DC Installer is responsible for assisting in the installation, maintenance, and testing of Direct Current (DC) power systems, including batteries, rectifiers, inverters, and associated cabling. This role supports essential infrastructure such as data centers, telecom networks, and utility facilities. Key Responsibilities Install and commission DC power systems and components (batteries, rectifiers, inverters, etc.) Route, terminate, and label DC power cabling according to engineering drawings and standards Perform battery builds, testing, and preventive maintenance Read and interpret electrical schematics, site plans, and technical documentation Ensure compliance with safety regulations, company policies, and industry standards Maintain accurate documentation of work performed, materials used, and site conditions Collaborate with team members, site contacts, and project managers to ensure timely and quality installations Travel to customer sites as required Qualifications High school diploma or equivalent; technical training or certifications preferred 1-3 years of experience in DC power installation or related electrical work Familiarity with telecom or data center environments is a plus Ability to use hand tools, power tools, and electrical testing equipment Strong attention to detail and commitment to safety Valid driver's license and ability to travel frequently Physical Requirements Must be able to lift, carry, and maneuver up to 75 pounds Ability to stand, walk, bend, kneel, crouch, and climb ladders or scaffolding for extended periods throughout the workday Must have good hand-eye coordination and be able to use hand tools, power tools, and testing equipment with precision Must have adequate vision (with or without corrective lenses) to read schematics, labels, and small print, and hearing sufficient to detect alarms, signals, and verbal instructions in noisy environments Comfortable working in a variety of environments including: Confined spaces (e.g., battery rooms, telecom closets) Elevated areas (e.g., ladders, lifts, rooftops) Outdoor conditions (heat, cold, rain) and indoor environments with limited climate control Willingness to travel frequently, sometimes on short notice, and work flexible hours including nights, weekends, and holidays as required by project schedules Must be able to wear required personal protective equipment (PPE) such as hard hats, gloves, safety glasses, steel-toed boots, and arc-flash gear Preferred Certifications (Not Required) OSHA 10/30 CPR/First Aid NFPA 70E Electrical Safety Compensation & Benefits: Salary Range: $20.00 - $30.00 per hour Compensation is based on: Relevant experience in critical infrastructure sectors Technical knowledge and certifications Additional Benefits: Medical, Dental, Vision, Life, and Disability insurance 401(k) with company match Paid time off and paid holidays Training and certification opportunities Additional Information: Criminal background check, pre-employment drug screen, and MVR are required This position requires travel to different job sites. Overnight stays may be necessary depending on the project location Overtime and weekend work may be necessary to meet project deadlines. The Installer should be flexible with work hours and be prepared for extended workdays National Power, LLC is an Equal Opportunity/Affirmative Action Employer and VEVRAA federal contractor and affords equal opportunity to all applicants for all positions without regard to race, color, religion, gender, national origin, age, disability, veteran status, gender identification, or any other status protected under local, state, or federal laws.

About the Role: Assembles and installs a variety of PC electronic components per customer requirements as defined in build instructions. Performs a wide variety of electronic, electro-mechanical, mechanical or measurement product assembly operations on product components, assemblies or sub-assemblies. Determines and/or follows methods and sequence of operations in performing wiring, component installation, cable harnessing, and fitting on assembly units. This role has an expected pay rate of $17.50 per hour. What You'll Do: Uses hand tools working in a team environment with other assemblers and support functions to produce products on time and with high level of quality. Follows detailed build instructions, best practices and ISO procedures. Performs simple assembly of various sub-assemblies, functions that are routine in nature with minimal complexity or variation Interacts mostly with immediate peers within assigned work group. Unpacks (post inbound de-trash), performs serial number capture, labeling, repack and other manufacturing prep and finishing duties as required. Maintains tools and equipment in proper working order Documents actions by completing production electronic stamp off's. What We're Looking For: Entry Level (0 to 1 Years of relevant work experience) High School Graduate required. Able to execute instructions and to request clarification when needed. Able to perform basic mathematical calculations. Able to communicate clearly and convey necessary information. Able to adjust readily to change and adapt as needed. Able to be standing / walking for long extended periods. Working Conditions: Distribution center environment may include (but not limited to): exposure to extreme temperatures; high noise levels; high places; wet and/or humid conditions; outside weather conditions. May be required to work in shifts (timing subject to business needs.) Key Skills At Shyft Global Services, a TD SYNNEX Company, our values guide everything we do: Together, We Own It, We Dare to Go, We Grow and Win, and above all, We Do the Right Thing. These principles shape how we work with each other, our partners, and our communities as we drive innovation and create lasting impact. What's In It For You? Elective Benefits: Our programs are tailored to your country to best accommodate your lifestyle. Grow Your Career: Accelerate your path to success (and keep up with the future) with formal programs on leadership and professional development, and many more on-demand courses. Elevate Your Personal Well-Being: Boost your financial, physical, and mental well-being through seminars, events, and our global Life Empowerment Assistance Program. Diversity, Equity & Inclusion: It's not just a phrase to us; valuing every voice is how we succeed. Join us in celebrating our global diversity through inclusive education, meaningful peer-to-peer conversations, and equitable growth and development opportunities. Make the Most of our Global Organization: Network with other new co-workers within your first 30 days through our onboarding program. Connect with Your Community: Participate in internal, peer-led inclusive communities and activities, including business resource groups, local volunteering events, and more environmental and social initiatives. Don't meet every single requirement? Apply anyway. At Shyft Global Services, a TD SYNNEX Company, we're proud to be recognized as a great place to work and a leader in the promotion and practice of diversity, equity and inclusion. If you're excited about working for our company and believe you're a good fit for this role, we encourage you to apply. You may be exactly the person we're looking for! We are an equal opportunity employer and committed to building a team that represents and empowers a variety of backgrounds, perspectives, and skills. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, gender, gender identity or expression, sexual orientation, protected veteran status, disability, genetics, age, or any other characteristic protected by law.

Benefits: Bonus based on performance Company car Free uniforms Health insurance Opportunity for advancement Paid time off Bath Tune-Up is growing at an exciting pace! We're seeking dedicated team members to join our team and complete bathroom remodeling projects in homes across our community. We are seeking career-minded remodelers or construction professionals who are willing to learn new techniques and are looking for a stable, well-paying career. Benefits/Perks: Lucrative Pay Steady work year-round Performance Pay Paid/Ongoing Training Growth Opportunities As a Bathroom Installer you will report to the Project Manager, and work on a team to safely and efficiently install showers, baths, vanities, and more on small to large scale projects. Duties and Responsibilities: Complete demolition of tub and shower areas. Install new tub/shower pans and acrylic wall/tub systems, vanity installations, general light construction, and trim work. Move materials to the job site and ensure all tools and other equipment are safely set up. Ensure tasks are completed to deadlines. Leave client's home in a clean and safe appearance. Qualifications: Valid driver's license. Ability to lift heavy objects. Willingness to learn and be flexible. Positive attitude and great interpersonal skills. Ability to envision and implement innovative solutions. Ability to safely operate power hand tools including a table saw, band saw, a power hand saw, router, planer, and powered nail gun. Remodeling experience preferred, but not required. We will train the right candidate. Ideal Candidates: Are available to work full time, Monday-Friday. Are available to occasionally work late (6pm) Have a strong attention to detail. Are innovative and prefer working in unconventional ways or on tasks that require creativity. Do you take pride in your work and want to be part of a growing local company that values your skills? This is a permanent, year-round position with paid training and bonus potential. Why join the Bath Tune-Up team?We offer substantial training and lucrative compensation for those willing to work inside of a process, keep a sharp eye for detail, remodel the expectations of our clients, and work hard. You will be working in some of the nicest homes in our community. Bath Tune-Up is a high-quality company, and we offer steady work and performance pay. Ongoing training with growth opportunities, if desired. Compensation: $20.00 - $27.00 per hour Bath Tune-Up Makes Homes Better Bath Tune-Up is a bathroom design and remodeling franchise system of dedicated professionals across the US & Canada with team members who go the extra mile to leave their clients' bathroom spaces even better than they found them. We specialize in full-service bathroom remodels, from a shower or tub install to complete renovation. Our team strives to minimalize the stress and overwhelm by handling all of the details, assisting with design ideas via our collection palettes, and providing a remarkable experience through our Customer Trustpoints. Find yourself a great career opportunity and join our growing team! The positions on this website, unless otherwise indicated, are posted by Bath Tune-Up franchisees. Bath Tune-Up franchises are independently owned and operated businesses and if you accept a position with a Bath Tune-Up franchisee, you are employed by that franchisee, and not by franchisor HFC BTU LLC, nor any of its parents or affiliates. The hiring franchisee is solely responsible for all employment decisions including hiring, termination, discipline, compensation and benefits and HFC BTU LLC and its parents and affiliates have no input or involvement in such matters. HFC BTU LLC does not receive, review or store any applications for employment. Any questions about posted positions or the hiring process must be directed to the Bath Tune-Up franchisee posting the position.

at Freedom Forever Join an established and innovative company in the fast-growing solar industry and enjoy strong pay rate + install bonuses + benefits + advancement opportunities! Do you have proven skills and experience completing solar installations and work with others to do their best work? If this sounds like you, and you want an opportunity where your commitment to quality and productivity will be rewarded, please keep reading! We're Freedom Forever, a fast-growing solar company known for innovation and quality, and we're looking for people who want an opportunity to build a career with us as a Solar Installer! Pay Range $19-$27/hr. (DOE) + Bi-Weekly Install Bonuses + Benefits We offer an extensive benefits package which includes: Medical Insurance Dental Insurance Vision Care Insurance $50k Life Insurance 401K Medical Reimbursement Accounts (HSA & FSA) Employee Assistance Program Paid Time-Off Bi-weekly bonuses As an Installer you will be responsible for assembling, installing and/or maintaining solar photovoltaic (PV) systems on varying surfaces (rooftop, ground mount, use specific structures, etc.). Daily activities are inclusive of, but not limited to, measuring, cutting, drilling, working from height, minor electrical work, assisting with structural upgrades, using hand/power tooling, reading plan-sets, following direction, following safe work practices and assisting senior members of the designated installation team. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES: • Loading and unloading Company vehicle with project materials • Loading and unloading materials to and from the roof/structure being installed on • Assemble all roof components in an efficient and safe manner • Perform electrical work as instructed by the crew lead, both independently and under direct supervision • Install projects adhering to Freedom Forever plan sets • Flashing penetrations as needed to ensure project quality • Ensure all work is performed in strict compliance with Freedom Forever policies, applicable codes (Ex: NFPA-70, IRC, IFC, CA-T24, etc.) • Strictly follow all Freedom Forever safety regulations and policies • Follow all direction given by senior members of the crew • Provide recommendations for efficiency and compliance gains through appropriate channels • Ensure customer satisfaction • Position may be required to communicate directly with the end user(s) • Some domestic travel may be required • May be required to drive a Freedom Forever vehicle • Perform other duties as assigned QUALIFICATION REQUIREMENTS: Education & Certifications: • High School Graduate or GED Experience: • 6 months to 1 year of PV installation experience (Preferred) Knowledge, Skills & Abilities: • Fundamental understanding of all PV products installed by Freedom Forever • Basic understanding of building standards and applicable codes • Ability to communicate with others professionally and concisely • Compliant installation of conduit (EMT, RMC, IMC, LFMC and FMC) • Follow written and verbal instructions Special Skills & Training: • All assigned Freedom Forever training modules and documentation must be completed by the designated due date • Optional training (Freedom Forever and external party) may be completed at the employee's discretion outside of business hours PHYSICAL DEMANDS AND ABILITIES Use their hands to handle, control, or feel objects, tools, or controls Stand for long periods of time Walk or run for long periods of time Climb ladders, scaffolds, or poles Kneel, stoop, crouch, or crawl Bend, stretch, twist, or reach out Repeat the same movements See details of objects that are less than a few feet away Determine the distance between objects Use fingers to grasp, move, or assemble very small objects Make quick, precise adjustments to machine controls Hold the arm and hand in one position or hold the hand steady while moving the arm Use one or two hands to grasp, move, or assemble objects Understand the speech of another person Use muscles to lift, push, pull, or carry heavy objects See differences between colors, shades, and brightness Move two or more limbs together (for example, two arms, two legs, or one leg and one arm) while remaining in place Use stomach and lower back muscles to support the body for long periods without getting tired Keep or regain the body's balance or stay upright when in an unstable position React quickly using hands, fingers, or feet While looking forward, see objects or movements that are off to the side Lift 50+ pounds HIGH PRIORITY TRAVEL REQUIREMENTS: (Employee is required to travel for business purposes, not including commute to and from work.) If required to travel, must have a valid Driver's License/Insurance and the ability to drive a personal vehicle to different sites. Freedom Forever is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: veteran status, uniformed service member status, race, color, religion, sex, sexual orientation, gender identity, age (40 and over), pregnancy (including childbirth, lactation and related medical conditions), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics) or any other consideration protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers. Employees of Freedom Forever must submit to a criminal history check, MVR check and a 9-panel drug screen that includes the following: Amphetamines, Cocaine Metabolites, Opiates, Phencyclidine (PCP), Barbiturates, Benzodiazepines, Methadone, Methaqualone, Propoxyphene. Job based in Ohio not seeking remote employees.

Job Title: Assembler - Power Department: Assembly reports to the Supervisor of the Assembly department Responsibilities: • Read work orders, follow drawings, sample assemblies, or verbal orders to assemble products • Assemble manufactured products according to blueprints, work orders, or verbal instructions • Execute assembly builds in a timely manner as defined by the production schedule • Work at bench or on shop floor to assemble electronic assemblies • Collect parts from inventory, as needed • Receive verbal instruction on priority of orders • Set-up daily work according to production schedule or verbal instructions • Use hand tools including torque controlled electric drills and wrenches • Work at different workstations & cross-train to support other departments, as required • Package finished products per boxing instructions • Package according to work instructions or verbal instructions • Label all products, assemblies, and complete paperwork • Maintain a clean work area and participate in the maintenance of the facility • Adhere to all safety and ESD protection standards as dictated by company • Perform testing on a variety of custom electronic products • Participate in product assembly training sessions, team activities, SQCDMM, and our continuous improvement process • Support the vision, mission, strategy and values of the company Requirements: Must have High School Diploma or equivalent, technical certification a plus Mechanically inclined with experience using basic hand tools Ability to understand written and verbal instructions in English Ability to work in a team environment and communicate effectively Ability to read and interpret work instructions, and assembly drawings Operate automated equipment (Conformal coat, Automated test, Wave, Lift assist, SMT, AOI) Ability to perform basic mathematical computations & and computer applications Must possess a strong attention to detail Must be able to tolerate long periods of standing and/or walking Must be able to perform activities that include bending, stretching and climbing Ability to regularly lift and move up to 25 lbs. and occasionally up to 50 lbs. Visual requirements include close vision, color vision, depth perception, and ability to focus General knowledge of workplace safety & ESD controls, a plus General knowledge of Quality Management Systems such as ISO9001 Work Environment - Manufacturing : Equipment (Test, measuring, component prep) Machinery Chemicals, (See SDS) Dust Noise Protective clothing and equipment may be required Use of a computer or electronic equipment may be required Hand jack use Prepared by: Human Resources Approved by: VP Operations

We are looking for subcontractors to install our LeafFilter Gutter Protection System! No experience is necessary, just a willingness to learn and possession of a truck or van, basic tools, and ladders. We pay weekly and per job every Friday. Average pay is $150-300+ per job which takes between 2-4 hours LeafFilter is America's #1-rated professionally installed gutter protection system, as rated by leading consumer magazines. LeafFilter installed over $1.4 billion in 2024. With 150+ offices across North America, there is an opportunity near you! What's in it for me? * Start working now - You can complete onboarding and training the same week and be installing next day * Pre-sold jobs - All you do is show up and install with the ability to complete on average 2 jobs per day * No product costs - We provide all products upfront for the installation * Flexible schedule - Set your own work schedule, work part-time, full-time, or as needed * Financial Freedom - Single installers (full time) average $100k+ per year while team installers can surpass six figures * Consistent Compensation and Weekly Pay - Earn an average of $1,500 to $3,000 per week. We pay weekly through direct deposit, no more waiting weeks or months to be paid * Discounts and Buying Power - Discount and loyalty program for direct access and discounts on insurance, tools, equipment, etc. * Comprehensive Instruction - Learn how to install our system the right way * Onboarding Assistance - We'll help you obtain general liability and/or workers comp insurance (where applicable) What you need * A dependable tuck or van * Your own tools and equipment * Ladders * Liability insurance (and workers compensation if required) or willingness to obtain * Professional appearance and demeanor * Strong communication skills We can have you installing and making great money sooner than you think! Start as soon as tomorrow

JOB SUMMARY The Installer is responsible for the accurate and professional installation of all our products at the job site according to our procedures and to the customer's satisfaction. He/ She will maintain the positive image, brand, and reputation of Universal Windows Direct ESSENTIAL FUNCTIONS Provide remodel expertise in areas of windows, doors, siding, and gutters. A majority of our business is windows, so we require experience with replacement windows. Maintain a pleasant and professional attitude when dealing with customers. Respect customers' property and leave the work area clean. Inform customers about the functionality, care and upkeep of their new installations. Accurately complete and submit all necessary paperwork, photos, or other required documentation. POSITION QUALIFICATIONS EDUCATION High School Diploma or equivalent. EXPERIENCE 2+ years of carpentry, trim carpentry, construction, or in-home renovation experience with the ability to take accurate measurements using tape measure, level and combination square. Own equipment and ability to use power tools (drill, jigsaw, etc.) ADDITIONAL REQUIREMENTS General liability insurance and workers compensation insurance or ability to obtain. Valid driver's license and maintain a good driving record. Reliable transportation for transporting products safely to work locations. Ability to lift and/ or push and/ or pull up to 100 pounds. Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Reasoning ability enabling you to understand and carry out detailed written, illustrated and/ or oral instructions.

Job DescriptionBenefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance We are growing very quickly and are looking to add an installer in the Columbus area . We are looking for someone to lead a crew. On the job training for someone highly motivated Overtime available during busy season You: Electrical experience /possibly license Gas line experience or ability to lean Generator experience helpful but we can teach Leadership / trainer experience or ability to learn Ability to work long hours when needed Valid drivers license Us: 40 plus hours per week On the job training We provide truck and tools Fast paced/ positive environment Room for advancement 401k Health / dental Paid vacations Hourly pay, rate depending on experience Job Type: Full-time

Kable Staffing is in urgent need of an Assembler in Dublin, OH. This is a temp to hire opportunity, full-time position.PRINCIPAL DUTIES & RESPONSIBILITIES Utilize documentation such as Bills of Material, product flow charts, work orders, check sheets, visual aids, and production reports toassemble product and record results Perform soldering, fabricating, crimping, mechanical assembly, taping, cable spooling, sealing, capping, clamping, bonding, and coiling Basic computer skills to review documents and to load and operate auto-baggers Inspect work throughout the assembly process and communicate any quality or operational issues Assist in correcting procedures to ensure consistency of quality and efficiency Maintain neat,orderly,and clean work area to ensure efficiency andno safety hazards Meet all quality,quantity,and good manufacturing practices to satisfy customer and Regulatory Affairs requirements Ensure environmental conservations by shutting off equipment and lights not in use Ensure first pieces at the beginning of each work order Record documentation to labor sheets, check sheets, visual aids, production sheets, and work orders Audit work orders daily Use proper equipment to transport finished goods to appropriate location REQUIREMENTS 18 years old Participate in safety programs, meetings, and trainings Ability to read, write, and communicate effectively Ability to perform basic arithmetic with the use of a calculator or computer Ability to distinguish colors Initial detection of nonconforming components Ability to lift up to 25 lbs. Ability to stand continuously Ability to push, pull, bend, twist, squat, climb, kneel,crouch, crawl,and/or stoop on a repetitive basis Ability to utilize hand/eye coordination and manual dexterity to include graspingand holding Pass a background check and drug test WHY KABLE STAFFING? Weekly Pay Exclusive Access Opportunities to V.I.P. Vault Day 1 Benefits Various Bonus Opportunities Eligibility for Employee of the Month Rewards ABOUT THE KABLE GROUPFor over 50 years, The Kable Group has been committed to connecting candidates looking for reliable work opportunities with companies in need of workforce solutions. We leverage our expertise in core industries to ensure that the needs of our clients and our candidates alike are satisfied. Whetherit'sa professional position, skilled labor need,or an education opportunity, The Kable Group's suite of solutions caters to finding the right fit, every time. At the Kable Group, we do not just accept diversity - we celebrate it, we support it, and we thrive on it. Read our full diversity statementhere. This job description is not intended to be all inclusive and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.

Installation Team Member Temporary Job Offer: MicroHabitat Installation Team Are you looking to work for a company with values in the right place that helps build more sustainable cities and communities? MicroHabitat is looking for someone to join the MicroHabitat Installation Team with ambition, leadership, and a passion for agriculture. Introduction: At MicroHabitat, we implement urban agriculture to improve urban environments, enhance the quality of life for city dwellers, and foster a better understanding of environmental issues. We install rooftop and ground-level gardens for businesses, institutions, and schools to reconnect people with nature and their food sources. What's in it for you? A fulfilling job where you'll enjoy working outdoors in the summer and grow in unique locations. A team-oriented environment that encourages initiative and leadership. Social events such as happy hours to celebrate the end of the contract. Fun team activities with colleagues-because MicroHabitat is a big family! Work alongside passionate colleagues. Contribute to change and sustainability for a better society by being part of the world's largest urban farm network. Equity, Diversity, and Inclusion: At MicroHabitat, we believe the unique personality, skills, background, and origin of each team member are essential to achieving our goal: connecting people to the nature around them through urban agriculture. Serving diverse cities is a privilege, and we aim to build a team reflecting these unique spaces. We encourage people from all backgrounds to apply and commit to creating an inclusive environment-recognizing it's an ongoing process. Job Description: Under the supervision of the Urban Farming Coordinator, the installation team members facilitate the implementation of urban agriculture projects in their region. Main Tasks and Responsibilities: Horticultural Management: Transport materials and plants to production zones. Open garden spaces with the MicroHabitat team during the installation period. Ensure cleanliness is maintained during installations. Perform related tasks like watering, tomato plant trellising, installing support systems, and irrigation systems. Representation and Administration: Represent the company as part of the installation team. Carry out tasks related to setting up production areas. Follow and maintain safety protocols for MicroHabitat's agricultural operations. Required Skills and Qualifications: For this position, candidates must be willing to perform the following tasks: Physical work, including heavy lifting. Work outdoors in warm environments. Operate in a high-pressure, fast-paced environment. Work long hours and get their hands dirty. Candidates Must: Be in good physical shape. Have access to a personal vehicle or reliable transportation. Own a functional cellphone. Have an interest in agriculture or gardening. Salary and Benefits: Salary: $21 /hour. Workdays vary between 4 to 8 hours/day (09.00 AM - 5:00 PM). 30-minute paid lunch per day.

Job DescriptionSalary: Up to $31.68/hour ACTIVELY HIRING IN THE NORTHERN COLUMBUS, OH AREA Union position - Journeyman pay is $31.68/hour on the paycheck. Apprentices make a percentage of this rate. Omni Fireproofing is looking to expand its team with spray foam installers. Must join union within 7 days of hire. LOCATION - no home base, you go where the jobs are - requires travel around the Columbus, Cincinnati, and Dayton areas. Candidates must have reliable transportation! No background check required. Must pass drug screen. Must be authorized to work in the US. Omni participates in E-Verify. Must have high school diploma or GED Summary:As a spray foam installer, you use specialized equipment to install fire-proofing foam insulation in walls. Your duties include using a hose and compressor to spray insulation between walls and building exteriors. You can also work in attics, ceilings, and other hard-to-reach areas. Responsibilities: Reads and interprets blueprints Assists supervisors with planning, layout, and installation Responsible for the timely and smooth coordination of installing spray foam insulation in buildings to the required specifications Operates tools, machines, and other equipment Complies with local building codes, and health and safety regulations Provides excellent customer service Stands for prolonged periods, climbs, pulls, and lifts heavy objects Completes other tasks as assigned by supervisor Requirements: Acquires and brings personal hand tools (Power and specialty tools will be provided) Bend, reach, twist, grab, lift up to 80 lbs Applicants must have: Positive, team first attitude Good work ethic Willingness to work in a dirty environment. Willingness to work in extreme climates (outside)