Prysmian Group jobs in Williamsport, PA - 82514 jobs

$2000 retention bonus paid within 1 year of employment (based on performance and eligibility) Route Sales Representatives are critical to our success at FritoLay! Our Route Sales Representatives are responsible for delivering, selling, and merchandising FritoLay's complete line of products including Lay's, Doritos, Cheetos, Tostitos, Fritos, and many more to local stores including gas stations, dollar stores, and large grocery stores. As a Route Sales Representative, you drive a FritoLay truck to different stores, work independently to unload orders, merchandise product, and partner with store managers to increase sales, order, and maintain records throughout the day. Although you will start out as a Route Sales Representative for FritoLay, we are investing in helping you grow with us. This job can open the door to career opportunities with us or our parent company, PepsiCo. In this role, here are some of the frequent tasks you will be doing: * Learn the basics of the role in four to six weeks of dedicated driving and selling training with our amazing team members * Run routes for team members', experience different stores, and meet new customers * Grow sales on the route by building relationships, selling in displays, and completing national initiatives * Attain a route with set days off/schedule with time * Work in a fun, fast paced, and physical environment We operate 24 hours a day, so you may not have a typical schedule! Team members often work weekends and holidays. Our jobs are physical! If you have never worked in this type of role before, you should understand that you will be on your feet for the entirety of your shift. Here are the minimum qualifications of this job: * Be 21 years of age or older * Have a valid driver's license with proof of insurance and ability to obtain other licensures as required by state law * Be able to frequently lift 40 lbs. with or without a reasonable accommodation As a full-time team member, you will be eligible to receive full company benefits. You can learn more about our benefits on our career site, but here are some of the benefits we offer: * 401(k) contribution * Health, dental and vision insurance * Financial support to help obtain a degree * Company discounts and perks All benefits are subject to eligibility terms and can vary based on length of employment, collective bargaining agreement and job status such as part-time or seasonal, as applicable. Our application takes 20-25 minutes to finish on any device. Our mission is to get you in for an interview instead of jumping through hoops. Just keep an eye on your e-mail, and we will take care of the rest. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. PepsiCo is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / Sexual Orientation / Gender Identity Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901 - 4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance. If you'd like more information about your EEO rights as an applicant under the law, please download the available [1] EEO is the Law & View the [2] PepsiCo EEO Policy. Visible links 1. ********************************************************************************** 2. *******************************************************************************************

$2,000 retention bonus paid within 12 months (based on performance and eligibility) Merchandisers are critical to our success at FritoLay! Merchandisers are responsible for merchandising FritoLay's complete line of products including Lay's, Doritos, Cheetos, Tostitos, Fritos & many more in stores including supermarkets and large grocery stores. Although you will start out as a Merchandiser for FritoLay, we are investing in helping you grow with us. This job can open the door to career opportunities with us or our parent company, PepsiCo. In this role, here are some of the frequent tasks you will be doing: * Drive your personal vehicle (with gas mileage reimbursement) to a variety of store locations * Retrieve FritoLay products and merchandise the product throughout the store * Work in a team environment with professional Route Sales Representatives * Follow a consistent schedule with specific start times and customers (You will have the opportunity to attain different work schedules with time!) * Leverage a company issued iPhone to view schedules, communicate with team members, and log activity We operate 24 hours a day, so you may not have a typical schedule, and our jobs are physical! If you have never worked in this environment, it is fun, fast-paced, and physical - you should expect that you will be on your feet for the entirety of your shift. Here are the minimum qualifications of this job: * Be 18 years of age or older * Have a valid driver's license with proof of insurance * Be able to frequently lift up to 40 lbs. with or without a reasonable accommodation As a full-time team member, you will be eligible to receive full company benefits. You can learn more about our benefits on our career site, but here are some of the benefits we offer: * 401(k) contribution * Health, dental and vision insurance * Financial support to help obtain a degree * Company discounts and perks Our application takes 20-25 minutes to finish on any device. Our mission is to get you in for an interview instead of jumping through hoops. Just keep an eye on your e-mail, and we will take care of the rest. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. PepsiCo is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / Sexual Orientation / Gender Identity Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901 - 4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance. If you'd like more information about your EEO rights as an applicant under the law, please download the available [1] EEO is the Law & View the [2] PepsiCo EEO Policy. References Visible links 1. ********************************************************************************** 2. *******************************************************************************************

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Find out if this opportunity is a good fit by reading all of the information that follows below. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment. Compiles alternative packages for purposes of retrofit, upgrade, or alternative functionality of equipment. · Independently performs maintenance as per industry standards; creates maintenance standards and instructions for altered or new manufacturing equipment. · Directs customer counterparts in maintenance optimization efforts, reliability, and preventative maintenance processes. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Conforms and complies with customer contractor codes of conduct, housekeeping standards, and safety processes · Documents work performed in service reports, applicable management systems, and written explanation regarding observation and collected equipment performance data. Compiles technical manuals, operations, and maintenance processes relevant to equipment upgrades and automation integrations. · Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development. · Alters, troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes advanced maintenance technologies to collect equipment performance data. Observes trends and makes recommendations. · Conducts on-the-job training and leads technical programs for technical development of customers and coworkers · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 12 years of related experience in specific industry; or, 15 years of experience in specific industry. · Possesses comprehensive understanding of electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use basic hand tools and specialized tools, and programming software as appropriate. · Extensive travel required. (Local, National, International) Desirable KSAs: · Experience in condition based maintenance techniques, precision mechanical alignments, maintenance of applicable process equipment, and automation integration. · Robust experience in programmable logic controllers, field device troubleshooting, maintenance of electrical drive and motor systems, and motion control devices. Competencies: · Communications · Customer Focus · Personal Discipline · Safety Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $44.97 - $57.53 USD ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ( ) ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. xevrcyc Revisión de la política de privacidad aquí here. ( )

A dynamic analytics company seeks a Strategic Customer Success Manager to serve as a primary advisor for large enterprise customers in San Francisco. The role requires a blend of strategy and relationship management, ensuring customers achieve maximum ROI with a focus on minimizing churn. Candidates should have extensive experience in Customer Success or Account Management, particularly within SaaS, and should be adept at building executive relationships and translating technical concepts into business value. Competitive compensation package included. #J-18808-Ljbffr

Apex Energy Solutions, named by Inc. Magazine as one of the fastest growing companies in the nation, is seeking to add one senior level Sales and Marketing rep, and 1-2 entry level reps. Qualified candidates will utilize Apex's proprietary iPhone/iPad sales tools to demo our exclusive home-performance products. All reps receive thorough development and paid training and receive exclusive rights to game changing selling tools. We believe in maintaining a healthy work-life balance, and we pride ourselves on a strong and fun company culture made up of well rounded individuals driven to succeed. At Apex, we don't simply sell home improvements; we educate homeowners so they make the right choices for their homes. And we offer products and services that support those decisions. Our product line includes an exlusive line of high performance windows that far exceed government standards for energy efficiency and sustainability. We match that premium product with expert installation and customer support to ensure that the products our clients choose perform well. We are a sales and marketing powerhouse that has won numerous awards for our advanced selling tools and copy-written marketing strategy. Highlights include: Exclusive product portfolio Exclusive iPad/iPhone presentations Nationally recognized Award Winning Sales Team Weekly Sales incentives and bonuses **We are currently doing in-person interviews for the following positions and do not have remote working positions available** Entry Level Sales Rep: Base plus commission or commission only ($40-$70k avg per year) Senior Level Sales Rep: Commission Only ($125-180k avg per year) Candidates must possess: Strong communication skills An entrepreneurial mindset Ability to function well in a team atmosphere A passion for innovation An aptitude for creative solutions Desire to better themselves Competitive spirit College degree preferred and a history of personal success is strongly favored.

Advanced data analysis & dashboarding (Tableau, Adobe Workspace) Adobe Customer Journey Analytics Business Practitioner Certification Experience creating custom projects in Adobe CJA Healthcare analytics experience Strong storytelling & visualization skills to influence design decisions

A global leader in fragrance is seeking a Category Director for its Consumer Products Division in East Hanover, NJ. This role requires a seasoned professional with over 15 years of experience in the fragrance or related industries. The ideal candidate will drive strategic initiatives, manage teams, and foster collaboration across departments. Candidates should possess strong leadership skills and a deep understanding of consumer trends. Attractive benefits included in the role. #J-18808-Ljbffr

Jobe Materials, L.P. (“Jobe Materials”) is seeking a Safety Director Jobe Materials is a family-owned ready-mix concrete, asphalt, and construction aggregates supplier operating in West Texas and Southern New Mexico with over 700 employees. The company also manufactures precast and prestressed concrete products, and operates three railyards that provide track space for transloading activities and railcar storage. The company operates its own quarries to produce its own aggregates, and has its own fleet of trucks for delivery of its materials. Founded in March 2005, Jobe Materials has proudly served West Texas and Southern New Mexico with top-quality construction materials and industry expertise. While our company has been operating for 20 years, the Jobe name and our roots in the construction materials industries go back over five decades. Our leadership, operations, and core values reflect a long-standing tradition of excellence in building the foundations of our communities. Responsibilities: · Leading and developing a team of employees with the company's Safety Department · Overseeing and updating the company's safety programs and safety goals. This includes implementing new and existing safety polices and protocol. · Representing the company in front of OSHA and MSHA representatives during any inspections and/or investigations · Conducting audits and inspections of company facilities to ensure compliance with all laws and regulations. · Conducting regular risk assessments across all operations, identifying vulnerabilities, and developing mitigation plans to minimize exposure. Collaborating with other departments to implement best practices for risk reduction. · Researching, evaluating and recommending changes to operations to improve the company's safety performance · Training company employees on safety policies and regulations. · Regularly reporting to company management regarding the company's safety performance · Developing proactive processes, procedures, systems, and metrics to drive continuous improvement towards reducing or limiting potential hazards at company facilities. · Other responsibilities as delegated and determined by senior management. Qualifications: · Bachelor's Degree, preferably in safety or a related field. · At least eight years of experience in safety fields · At least four years of experience in a leadership or management role · Prior experience in the construction industry is preferred. · Prior managerial experience · Certified Safety Professional (CSP) designation is preferred. · Knowledge of OSHA regulations, inspections and investigations. Preferred to have OSHA “Train the Trainer” certification. · Knowledge of MSHA regulations, inspections and investigations is preferred. · Bilingual skills are preferred. · Strong organizational skills and attention to detail · Valid Driver's License is required Salary Range: Salary will be based on experience. Company Benefits: Jobe Materials provides competitive and generous benefits for its salaried employees. The company provides a 401(K) retirement plan with an employer match component. Jobe Materials prioritizes the health of its employees, and its health insurance benefits for its employees reflect that. A company cell phone and other necessary technology devices will be provided. Additional benefits would be discussed with candidates during the interview process. Equal Opportunity Employer: Jobe Materials is an equal opportunity employer. Jobe Materials shall not discriminate against any employee or applicant for employment on the basis of race, color, religion, sex, age, national origin, sexual orientation, gender identity and expression, domestic partner status, pregnancy, disability, citizenship, genetic information, protected veteran status, or any other characteristic protected by federal, state, or local law. Applicants may apply using websites where this job posting is listed. Please send your resume with cover letter and references, salary requirements, and safety policy writing samples to: Garrett J. Yancey, General Counsel, at ******************.

A leading beverage company is seeking a Principal Scientist to lead innovation and product development across its juice brands. The ideal candidate should possess over 8 years of experience, strong project management skills, and expertise in formulation. This role offers a competitive salary and a comprehensive benefits package. The position is based in Chicago, IL, requiring a blend of remote and on-site work. #J-18808-Ljbffr

HIRING FOR DAY SHIFT AND NIGHT SHIFT, 12 HOUR ROTATING SHIFTS. Work with a team to ensure equipment is operational. Perform daily preventative and predictive maintenance on equipment. Record and document maintenance performed. Maintain cleanliness of maintenance shop. Follow proper lock-out/tag-out procedures. Assist to ensure adherance to all company, state and federal regulations. All other relevant duties to the job. Manufacturing equipment repair experience required. Ability to replace basic component parts on equipment. Mechanical diagnostics and repair experience. Knowledge of wire belt and plastic conveyor repairs, and sprocket alignment and installation.

Important: Must be authorized to work in the United States without sponsorship. Florim USA, the American subsidiary of Florim Group, is a leading provider of porcelain tile solutions based in Clarksville, TN. We pride ourselves on our commitment to innovation, quality, and ecological mindfulness. With over two decades of experience, our facility stands as one of North America's largest and most technologically advanced porcelain manufacturing plants. At Florim USA, we're dedicated to producing sustainable, high-quality products while making a positive impact on society and the environment. Distributed under our MILE stone brand, Florim USA proudly offers uniquely styled, Sustainable Tile, made in the USA, in over 2500 stores nationwide. Position Summary We are seeking a creative and technically skilled Architectural Visualization Specialist to join our Corporate Marketing team. This role goes beyond product rendering-our ideal candidate has both the technical ability to produce photorealistic digital scenes and the creative vision of an interior designer. You will create inspiring, high-quality environments that showcase our tile products in realistic, ergonomic, and visually compelling ways. Essential Functions: Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions: 3D Product Rendering: Model high-resolution 3D visualizations that accurately depict product finishes, textures, and details. Architectural Visualizations: Design photorealistic interior and exterior environments that highlight tile applications in inspiring, real-world settings. Animation & Multimedia: Create animations and motion assets, ensuring optimized performance for web and digital platforms. Pipeline & Asset Management: Manage 3D asset workflows, rendering outputs, and archival of reusable content. Creative Strategy Participation: Contribute design insight during brainstorming sessions and campaign planning. Deadline & Budget Management: Deliver projects on schedule while adhering to budget expectations. Industry Awareness: Stay updated on design trends, visualization tools, and emerging technologies. Digital Library Maintenance: Organize and maintain visualization libraries, ensuring brand compliance. Core Competencies: Interior Design Insight: Strong knowledge of modern and contemporary space planning, ergonomic layout, lighting (natural/artificial), and color theory. 3D Visualization Expertise: Skilled in Blender, 3ds Max, Cinema 4D, or SketchUp; rendering engines such as V-Ray, Redshift, or Cycles. Design Tools: Proficiency in Adobe Creative Suite (Photoshop, After Effects, Premiere) for post-production and video editing. Creativity & Vision: Ability to transform products into inspiring, market-ready visual narratives. Communication: Strong ability to present design concepts clearly and persuasively. Organization: Capable of managing multiple projects simultaneously with attention to detail. Collaboration: Works effectively with cross-functional teams. Customer Orientation: Designs with the client perspective in mind, balancing inspiration and practicality. Innovation & Learning: Actively seeks out new design tools, workflows, and trends to elevate work. What We're Looking For: Bachelor's degree in Digital Design, Architecture, Interior Design, Graphic Design, or related field; or equivalent combination of education and experience. Proven professional experience in architectural visualization, interior design rendering, or related digital design role. Portfolio demonstrating both photorealistic rendering skills and creative design capability. Proficiency in 3D visualization software and rendering engines (Blender, 3ds Max, Cinema 4D, V-Ray, etc.). Strong knowledge of Adobe Creative Suite (Photoshop, After Effects, Premiere). Florim USA is proud to be a company committed to our employees' well-being and the well-being of the environment and communities in which we operate. We offer a competitive salary and benefits package, including medical, dental, vision, life, disability, 401(k) with company match, tuition reimbursement, and more. Florim USA is a drug-free workplace. All hires are required to pass a pre-employment drug test. Florim USA provides equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, pregnancy, sexual orientation, gender identity and/or expression, genetic information, marital status, public assistance status, veteran status, or any other characteristic protected by law.

A nonprofit organization located in Oak Brook is seeking an Assistant Executive Director for Finance and Administration. This role will act as the Chief Financial Officer, overseeing financial operations, budgeting, HR strategy, and compliance. The ideal candidate will have over 12 years of financial leadership experience, ideally within nonprofits, and possess a strong background in financial management and risk assessment. The position offers a competitive compensation package along with a hybrid working environment. #J-18808-Ljbffr

The mission of the Maintenance Manager is to manage maintenance functions for a facility. Areas included are building utility systems, equipment maintenance and building and grounds maintenance. Ensures that maintenance department objectives are met including project, cost, quality and safety factors. RESPONSIBILITIES OF THIS POSITION: Leads the Maintenance team to ensure efficient and effective support for Production and the facility, including: -Support in training of Maintenance personnel. -Assists and guides Maintenance personnel as needed. -Is responsible for the safety and good housekeeping work habits of all Maintenance personnel. -Assigns priorities and work to Maintenance personnel. -Participates in Maintenance personnel evaluations. -Order supplies according to business needs within limits. -Oversees and coordinates Maintenance projects. Ensures that maintenance department objectives are met including project, cost, quality and safety factors. Responsible for developing and maintaining PM program for the company. Is on call to come to work during off shift hours to help in emergency situations. Attend and participate in training opportunities and seminars relevant to this position. Foster a of continuous improvement environment with clearly defined objectives and plans. Provide continued support to meet the objectives. Responsible for the annual EPA reporting and corresponding regular system checks. Support in Capital requests as needed. Makes sure that all work is performed according to Local, State and Federal Government rules and regulations. Ensures that outside contractors perform as specified on the contracts and follow all Habasit rules and regulations. Areas included, but are not limited to, are building utility systems, equipment maintenance and building and grounds maintenance. Any other duties as assigned. COMPETENCIES/SPECIFIC EXPERIENCE OR TRAINING PREFERRED: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements/preferences listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required - Bachelors Degree in Engineering or Related Field Required - Five years experience in manufacturing/production/assembly environments Required - Competency with Process Improvement/Lean concepts Required - High Competency with MS Word, Excel, PowerPoint, CRM Applications Preferred - Electricians, Plumbing, Welding Licenses

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Apply fast, check the full description by scrolling below to find out the full requirements for this role. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. · Independently performs maintenance as per industry standards. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Complies with 5S and housekeeping standards. · Drives and participates in CI activities - processes, results and cost savings. · Updates records and reviews CMMS history. · Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems. · Utilizes predictive maintenance technologies to collect equipment performance data. · Provides assistance to lower level technicians and leadership to small teams. Performs more advanced functions as a part of training and development. · Completes on-the-job and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry or successful completion of the ATS Technician Progression Program. · Understands electrical, mechanical, fluid power and control systems. Can analyze problems and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate · May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $31.70 - $40.55 USD ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ( ) ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. xevrcyc Revisión de la política de privacidad aquí here. ( )

A prominent electrical contractor is seeking a Groundman for powerline construction and maintenance. The role involves supporting line-workers, ensuring safety, and performing physical tasks. Candidates must be able to lift over 50 lbs and are expected to obtain a Commercial Driver's License permit. This position may require working outdoors under varying conditions. Commitment to safety and teamwork is essential. #J-18808-Ljbffr

SUMMARY Combination - Capable of certifying on multi-process pipe being proficient in SMAW, GTAW and GMAW welding processes. May require x-ray qualities. Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. RESPONSIBILITIES - Selects type and size of pipe or other related materials and equipment according to specifications. - Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. - May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. - Lays out, positions, aligns and fits components together in various body positions. - Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. - Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. - Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. - Starts power supply to produce electric current. - Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece. - Manually guides electrode or gun along weld-line, maintaining length of arc and speed and movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. - May manually apply filler rod to supply weld metal. May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes. May remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. May preheat work piece, using hand torch or heating furnace. May cut metal plates or structural shapes. - Examines weld for bead size and other specifications. - Loads, transports and unloads material, tools, equipment and supplies. - May assist in lifting, positioning and securing of materials and work pieces during installation. - Performs minor maintenance or cleaning activities of tools and equipment. - Assists other mechanics as needed. - Respiratory protection is common and may be required. - Required to pass employer performance tests or standard tests to meet certification standards. Performs only procedures certified in. - Responsible for observing and complying with all safety and project rules. Performs other duties as required. JOB REQUIREMENTS - Work within precise limits or standards of accuracy. - Make decisions based on measurable criteria. - Apply basic mathematics to solve problems. - Plan work and select proper tools. - Visualize objects in three dimensions from plans and drawings. - Compare and see differences in the size, shape and form of lines, figures and objects. QUALIFICATIONS May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. PHYSICAL REQUIREMENTS 1. Strength: a. Standing 50% Walking 20% Sitting 30% b. Lifting 35 lb. Carrying 35 lb. Pushing 0 ft-lb. Pulling 0 ft-lb. 2. Climbing O Balancing O 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering C EXPLANATION OF SYMBOLS NP Not Present O Occasionally (0-33%) F Frequently (34-66%) C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.

Are you a designer who thinks like an engineer-and builds like a visionary? We're looking for an Engineering Product Designer to help us shape the future of furniture and cabinetry. You'll lead the charge in designing products that are not only functional and beautiful, but also manufacturable, reliable, and cost-effective. This is a hands-on, full-time role where your ideas move from sketch to shop floor. You'll collaborate across departments, listen to customer needs, and turn insights into products that stand out in the market. What You'll Do Design and develop innovative furniture and cabinetry products from concept to production Collaborate with engineering, marketing, sales, and manufacturing to bring ideas to life Conduct user research and testing to validate product features and performance Create detailed CAD models, prototypes, and product documentation Apply engineering principles to ensure safety, reliability, and manufacturability Balance aesthetics with function, cost, and production feasibility Requirements Bachelor's degree in engineering, industrial design, or equivalent experience 5+ years designing furniture or cabinetry products from concept to launch Proficiency in CAD tools like SolidWorks, Inventor, or SketchUp Deep understanding of materials, manufacturing processes, and safety standards Strong collaboration skills across technical and creative teams A sharp eye for detail, a problem-solving mindset, and a passion for design Your Benefits Include: Highly competitive salary and bonus structure On-Demand Pay - Access your earned pay prior to payday 100% Company-Paid Life Insurance and Disability Insurance Affordable Employee Health Insurance Competitive Paid Time Off Plan plus 9 Paid Holidays 200% Company 401(K) Match Annual Profit-Sharing Bonuses Company Stock Options Dental & Vision Insurance Health Savings Account with Company match On-site Childcare for Employees' Children and Grandchildren Educational Assistance Plan Additional Employee Perks such as fitness club reimbursement, retail discounts, company apparel, special employee events and meals, and more Stevens Industries, Inc. and Tot Mate Central is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. The pay range provided represents the expected compensation for this position. Actual pay will be determined based on factors such as experience, skills, and qualifications, while maintaining fairness with internal pay structures. We ensure compliance with all applicable wage and hour laws, including those related to minimum pay requirements. Salary Description $70,000 to $85,000

Job ID 2025-13403 # of Openings 1 Category Project Management Benefit Type Salaried High Fringe/Full-Time LMI seeks a skilled Deployment Manager responsible for assisting Customs and Border Protection (CBP), US Border Patrol (USBP) to execute its tactical infrastructure construction, maintenance, and repair program, which generally consists of the life cycle planning and execution of construction, maintenance and repair along the borders of the United States. This position will support the deployment of the Program Management Office Directorate (PMOD) Subterranean Portfolio Linear Ground Detection System (LGDS) program at remote border locations. Join our team of collaborative self-starters focused on delivering practical and efficient solutions to help our client keep U.S. borders safe and facilitate trade and travel. As part of our high-performing team, you will augment our vital work to provide "eyes and ears" technology to protect our nation. Position is remote with approximately 50% CONUS travel required. This position is located in Nogales, AZ. LMI is a new breed of digital solutions provider dedicated to accelerating government impact with innovation and speed. Investing in technology and prototypes ahead of need, LMI brings commercial-grade platforms and mission-ready AI to federal agencies at commercial speed. Leveraging our mission-ready technology and solutions, proven expertise in federal deployment, and strategic relationships, we enhance outcomes for the government, efficiently and effectively. With a focus on agility and collaboration, LMI serves the defense, space, healthcare, and energy sectors-helping agencies navigate complexity and outpace change. Headquartered in Tysons, Virginia, LMI is committed to delivering impactful results that strengthen missions and drive lasting value. Responsibilities You will serve as a deployment manager for the client's linear technology. You will facilitate the clients technology construction deployments by: Serving as agency representative for assigned project(s), responsible for a successful execution of the CBTT Program Being responsible for successful project execution including management of scope, schedule, budget, risk, and contractor performance Being responsible for ensuring timely elevation of project issues through the Planning and Project Execution Team for resolution Identifying, evaluating, and mitigating risks, issues, and opportunities for assigned project(s) Serving as the project expert and spokesperson for the project(s) with responsibility to present, explain, and defend program management issues and directions to higher-level official in CBP, DHS, and other government agencies and interested public groups as requested by the Program Manager. Collaborating with the U.S. Army Corps of Engineers (USACE), Federal Aviation Agency (FAA), Engineering, Business Management, key stakeholders, and other offices throughout the project life cycles Coordinating all project related outreach efforts Qualifications Background Investigation: Active U.S. Customs and Border Protection background investigation required. Education & Experience: Master's degree in business, management, finance, or information management with 10+ years of experience, or Bachelor's degree with 12+ years of experience, or High School diploma with 25+ years of relevant experience. Experience in: Deploying technology systems and construction management, remote sensor maintenance and/or repair, and/or Civil/site design. Experienced leader with: 3-5 years in a related team-lead role with 1-2 years in a leadership or supervisory capacity. Technical Knowledge: Knowledge of MD-102. Understanding of NEPA and federal real estate clearance process. Engineering and project management for DHS or DoD in communications and sensor technology. Technical Proficiency with Microsoft Word, Excel, Outlook, PowerPoint, and SharePoint. Excellent Communication & Problem-Solving skills with the ability to make informed decisions. Strong organizational Skills with the ability to manage multiple tasks and prioritize effectively. Experienced in managing multiple projects with independent schedules and budgets. Travel: Willingness to travel approximately 50% of the time. LMI is an Equal Opportunity Employer. LMI is committed to the fair treatment of all and to our policy of providing applicants and employees with equal employment opportunities. LMI recruits, hires, trains, and promotes people without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, disability, age, protected veteran status, citizenship status, genetic information, or any other characteristic protected by applicable federal, state, or local law. If you are a person with a disability needing assistance with the application process, please contact Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Need help finding the right job? We can recommend jobs specifically for you! Click here to get started.

Prysmian is the world leader in the energy and telecom cable systems industry. Each year Prysmian manufacturers thousands of miles of underground and submarine cables and systems for power transmission and distribution, as well as medium low voltage cables for the construction and infrastructure sectors. We also produce a comprehensive range of optical fibers, copper cables and connectivity for voice, video, and data transmission for the telecommunication sector. We are 30,000 employees, across 50+ countries. Everyone at Prysmian has the potential to make their mark; because whatever you do, wherever you are based, you will be part of a company that is helping transform the world around us. Make Your Mark at Prysmian! Salary Range: $35.38-$37.13 Benefits: * 13 Company paid holidays * Medical, dental and vision insurance, effective immediately * 401(k) savings with company match * Company Growth * Company provides uniform * Boot reimbursement * Tuition Principal Duties & Responsibilities: * The incumbent has frequent contact with people at every level in the Williamsport organization as well as with vendors and contractors. Contact with personnel from other Cable Division plants and offices are also occasionally required. * The incumbent must have the ability to work as a team member, frequently in a leadership role, and the ability to coach, train, and motivate employees to help achieve plant and department objectives. He or she must maintain a high level of safety awareness and encourage it among the other employees on his or her work team. * This position is a key one in the Williamsport electrical/electronic repair team. The incumbent is primarily responsible for troubleshooting electrical and electronic control devices and systems and effecting timely repairs. Additional responsibilities include the design of new circuitry (and modifying existing circuitry) and management of selected projects as required to meet the needs of the Maintenance Department's internal customers. * Safety of personnel (self and others) including, but not limited to, total compliance with OSHA and other government regulations, will be the primary consideration carrying out all aspects of this position. * Use available schematic diagrams, vendor supplied technical data and a full range of test equipment to troubleshoot and repair plant electrical and electronic control systems insuring maximum up time for the operating department. * Specify and assist in selecting new electrical and electronic equipment, components and, where applicable, installation and repair service required to maintain and upgrade plant operating systems. Prepare requisitions for needed electronic components and supplies. * Inspect, calibrate, program and adjust plant electrical and electronic systems (including programmable controllers, computers and AC&DC drives) to insure optimal performance of operating systems and product of the highest possible quality. * Encourage and support teamwork within electrical work group. This may include organizing work teams to solve problems and serving as a member of teams organized by others. Support and participate in the department safety committee. * Recommend changes to plant electronic components and systems to improve performance, reduce costs, improve quality and insure optimal operation of associated machines. * Assist maintenance electricians in performing PM, repairing breakdowns, and carrying out maintenance projects. * Maintain highest level of housekeeping at all times. * Maintain records necessary to analyze how equipment is performing over time and determine what must be done to enhance its operation. * Carefully and thoroughly document all work. Keep existing documentation current and accessible to other team members. Insure that copies of software are up to date and available to the rest of the team and that sufficient backup copies are maintained in a safe location. * Work nonscheduled hours when needed. Qualifications: * The ideal candidate will have a minimum of 5 years' experience in a maintenance role (or wire & cable experience preferred), and a proven track record of results in the installation, operation and maintenance of manufacturing processes and equipment utilized in a continuous operation. * Technical degrees considered a plus when supported with applicable experience. * A result driven individual with a proven track record in a fast paced manufacturing environment. * Strong project management abilities. * Able to manage and execute multiple, complex tasks and deal easily with pressure on a daily basis. * Strong verbal and written communication skills. * Flexible work schedule to support facility that runs 24 hrs. a day, 7 days week. * The ability to operate all commonly used electrical/electronic test equipment including: * -Oscilloscopes, including those with signal storage * -Digital and analog multimeters, ammeters, megohmmeters, frequency meters and signal generators * -Data loggers and chart recorders * -Power Demand Analyzers * A working knowledge of computers, including PC's and those custom designed and applied as part of control systems. Incumbent must have the ability to download information, configure and setup software, apply and troubleshoot serial communications and repair systems with this type of equipment. Must be comfortable with and able to use a computer as a normal working tool. * The ability to apply and program Programmable Logic Controllers. * A two (2) year associate degree in electrical/Electronics Technology or related degree with experience, but a two year electrical certificate with demonstrable aptitude for the work described above and a willingness to pursue further education as needed through training.doc Work Environment/Physical Demands: * Will be required to sit, bend, kneel, squat, use keyboard, read, write, and speak fluently. * Employee will be required to work productively and cooperatively in a high-volume, fast paced, highly pressured environment and be able to respond efficiently and courteously to unanticipated problems and crisis. Prysmian, as an Equal Opportunity Employer, aims to attract and recruit individuals with diverse backgrounds, skills, and abilities. We strongly believe that diversity brings significant value at all levels of the organization, increasing the possibility of capturing market opportunities and maximizing value for our customers and stakeholders. With Diversity, Equity, and Inclusion (DE&I) as part of our Social Ambition 2030 and a strategic pillar of our Company culture, Prysmian is committed to the development of an organization that prioritizes talent, where people feel respected, included, and free to fully express their potential just as they are. All Managers and HRs in Prysmian are responsible for ensuring DE&I policies are respected during the recruiting process, as well as recognizing and mitigating unconscious biases that must not influence our selection processes. All persons will be considered for employment without regard to their race, ethnicity, religion, nationality, origin, citizenship status, socio-economic status, age, sex, gender identity or expression, sexual orientation, marital status, disability, military service or veteran status, pregnancy, parental leave, medical conditions, or any other characteristic protected by applicable federal, state or local laws. Prysmian will endeavor to make a reasonable accommodation for any disclosed physical or neurological condition or disability of a qualified applicant unless the accommodation would impose an undue hardship on the operation of our business. Visit our DE&I Page to learn more about Prysmian's commitments. Your application data will be treated according to our Data Protection Policy. If you believe you require assistance to complete this form or to participate in an interview, please contact us at *********************************. ************************************************************************************ ******************************************************************************************************* ********************************************************************************************