General Electric jobs in Wilmington, NC - 34 jobs

The Project Manager is responsible for planning, executing, and delivering end-to-end implementation of a distribution network across designated regions. This role leads cross-functional teams (Supply Chain, Logistics, IT, Finance, Quality, EHS, and Commercial) to design network topology, onboard/stand up 3PLs/DCs, integrate systems (WMS/TMS/ERP), and achieve target service levels, cost, and reliability. Success is measured by Safety, Quality, Delivery, and Cost outcomes, including on-time go-lives, inventory accuracy, OTIF performance, and budget adherence. There are two positions which are both open to remote consideration. One of the positions will require up to 25-30% domestic travel. The second position will require up to 75% international travel for the first 3-6 months. **Job Description** **Key Responsibilities** + Lead full lifecycle projects to stand up or reconfigure distribution centers (DCs), forward stocking locations (FSLs), and 3PL operations + Drive development of network design, capacity, and location strategy in partnership with Supply Chain and Logistics Engineering + Establish and manage integrated project plans, schedules, budgets, risks, and change control + Oversee facility readiness: layout, racking, material flow, EHS compliance, security, and regulatory requirements + Manage system integrations and cutovers: WMS/TMS/ERP, EDI, labeling/compliance, and master data readiness + Define and implement standard operating procedures (SOPs), SLAs, and KPIs; ensure training and work instructions are in place + Coordinate 3PL selection and start-up: RFPs, contracts/SOWs, implementation, performance governance + Execute inventory migration, slotting, and ramp plans; validate cycle counts and inventory accuracy + Lead hypercare and stabilization; implement root cause actions to reach steady-state performance + Report progress, risks, and mitigations to stakeholders and leadership; ensure alignment to business case + Champion continuous improvement and lean practices to optimize throughput, cost, and service + Ensure compliance with EHS, quality, trade, and cybersecurity requirements **Required Qualifications** + Bachelor's Degree from an accredited college or university (or a high school diploma/GED with a minimum of 4 years project/program management, logistics, distribution or manufacturing experience) + minimum of 3 years project/program management, logistics, distribution or manufacturing experience **Desired Qualifications** + Bachelor's degree in Supply Chain, Industrial Engineering, Operations, Business, or related field; advanced degree or PMP/Prince2 a plus + Proven experience launching DCs/FSLs or onboarding 3PLs and executing WMS/TMS implementations and cutovers + Strong understanding of network design, inventory management, transportation, and warehouse operations + Demonstrated ability to manage large cross-functional teams and external partners + Proficiency with project tools (e.g., MS Project/Smartsheet), data/analytics (Excel, SQL/BI a plus), and process mapping + Excellent communication, stakeholder management, and vendor negotiation skills + Experience with EDI, labeling/compliance standards, and master data governance preferred + Knowledge of EHS, trade compliance, and quality management systems in distribution environments **Key Metrics (SQDC)** + Safety: Recordable incident rate, compliance audit results + Quality: Inventory accuracy %, ASN/label compliance, damage/defect rate + Delivery: On-time go-live, OTIF/Fill rate, dock-to-stock time, order cycle time + Cost: Budget adherence, cost-to-serve, 3PL productivity and rate performance **Competencies** + Strategic planning and execution + Risk management and issue resolution + Vendor/3PL management and contracting + Systems integration and data readiness + Change management, training, and SOP deployment + Continuous improvement/lean mindset + Analytical problem solving and decision-making + Clear, concise communication **Travel** + There are two positions which are both open to remote consideration. One of the positions will require up to 25-30% domestic travel. The second position will require up to 75% international travel for the first 3-6 months. The salary range for this position is $94,000 - $145,000 USD Annual. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. This posting is expected to close on February 3, 2026. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

SummaryLead teams to oversee facility maintenance, construction and rearrangement projects. Impacts departmental operations and responsible for planning/execution. The role has some autonomy but is focused on execution of activities within an operating discipline covered by standard functional practices and procedures. Some judgment may be required but this is typically with guidance.Job Description Roles and Responsibilities Manage machine move, installation, and removal requests, ensuring efficient execution. Oversee subcontractors, ensuring compliance with health and safety standards and protocols. Deliver exceptional customer service by balancing stakeholder input with business needs. Collaborate with business units and industrial engineering teams to optimize work efficiency and cost-effectiveness. Provide input on project sequencing and phasing, considering equipment delivery and work performance timelines. Maintain ownership of as-built documentation and production machine floorplans, ensuring accuracy and adherence to record-keeping best practices. Assist in preparing and coordinating monthly forecasts for construction and rearrangement expenses by project. Facilitate and approve current work order process utilizing MAS (CMMS) program. Ensure building and facility preventive maintenance is compliant through daily management. Support EHS directives and sustainability initiatives. Required Qualifications Bachelor's Degree accredited college or university (or a high school diploma / GED with a minimum of 4 years of experience in Design and Construction experience) Minimum of 3 years of Design and Construction experience Desired Characteristics Prior experience leading teams and projects. Proven ability to scope, estimate and oversee the construction of projects. Technical expertise in an engineering discipline. Knowledge of building codes, NFPA and 70E. PMP certification Ability to drive innovation, execute plans and to think creatively. Able to adapt to constantly changing work assignments and fast paced work environment. Humble: respectful, receptive, agile, eager to learn. Transparent: shares critical information, speaks with candor, contributes constructively. Focused: quick learner, strategically prioritizes work, committed. Leadership ability: strong communicator, decision-maker, collaborative. Problem solver: analytical-minded, challenges existing processes, critical thinker GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a “Sponsor”). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. #LI-KM1 This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

The Military Field Service Representative (FSR) located in Tolemaida, Colombia, will support the Colombian military in their operation, management, repair, installation, and maintenance of assigned GE equipment for starting up and operating a T700 engine depot. In this role, the FSR will act as a liaison between GE Aerospace and the customer. Candidates must be mobile to meet the needs of the customer, program and business. **Job Description** **Job Title** T700 Depot Military Field Service Representative - Tolemaida, Colombia **Company Intro/About GE Aerospace** GE Aerospace is a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We power flight safely and reliably for today, tomorrow, and the future, partnering closely with customers to deliver high-quality outcomes with speed and efficiency. **Site, Business, OR Functional Area Overview** This role supports the startup and sustained operation of a T700 engine depot in Tolemaida, Colombia, serving the Colombian military's helicopter fleet. The Field Service organization is focused on operational readiness, on-time delivery, and cost-effective maintenance solutions that meet contractual and mission requirements. **Role Overview** The Military Field Service Representative (FSR) will serve as GE Aerospace's on-site liaison to the Colombian military, supporting depot startup and ongoing repair, installation, troubleshooting, and maintenance activities for T700 turboshaft engines. The FSR will coordinate technical support, drive issue resolution, and enable customer success while meeting contractual, safety, and quality objectives. **Key Responsibilities** + Act as the single point of contact to the customer for timely resolution of depot-level tooling, maintenance, repair, and engine management concerns + Establish and maintain strong on-site relationships to provide ongoing technical and business support + Provide hands-on technical assistance leveraging in-depth knowledge of T700 installation, operation, and troubleshooting to keep the customer on schedule + Use disciplined analytical methods to drive root-cause analysis; create presentations and spreadsheets (including pivot tables and Pareto charts) to track issues and implement lasting corrective actions + Exercise sound judgment to propose solutions beyond set parameters for complex maintenance and troubleshooting scenarios, drawing on internal and external resources + Lead low-risk projects and serve as a resource for colleagues; explain technical concepts and build consensus across maintenance, engineering, and management stakeholders + Uphold and promote safety, quality, delivery, and cost objectives; ensure compliance with export control and security requirements **Required Qualifications** + Fluent in Spanish and English (reading, writing, and speaking) + Bachelor's degree from an accredited college or university; or a High School Diploma/GED plus a minimum of 4 years in a field service representative or jet engine maintenance role + Minimum 3 years of field maintenance, modification, and repair experience on T700 engines + Strong oral and written communication skills with demonstrated ability to analyze and resolve problems + Ability and willingness to travel as required + Ability and willingness to obtain and maintain a U.S. Government security clearance **Desired Characteristics** + 5+ years of hands-on turboshaft engine maintenance experience + T700 experience across depot, organizational, intermediate, and flight line troubleshooting levels + Strong customer interaction and communication skills; proven leadership abilities + Demonstrated proficiency in repair troubleshooting, shop operations, testing of jet engines, and support equipment tooling + Ability to make formal presentations to maintenance, engineering, and management at all levels + Project management experience; ability to lead and influence customers and peers + Experience mentoring and transferring technical knowledge; strong written and oral communication + Ability to work independently with technical guidance as needed + High degree of tact and diplomacy to collaborate effectively with customers at all levels + FAA Powerplant license (preferred) **Additional Information** The base pay range for this position is $100,000.00-133,000.00 USD Annual The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on January 23rd, 2026 GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage, access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits includ tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time -off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or prog rams (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. © 2023 GE Aerospace and/or its affiliates. All rights reserved. Attorney-Client Privileged **Closing** At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), final offers will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Closing At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherw _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Install, maintain, and repair internal factory equipment. Supervise employees who perform maintenance functions. Impacts departmental operations and responsible for planning/execution. The role has some autonomy but is focused on execution of activities within an operating discipline covered by standard functional practices and procedures. Some judgment may be required but this is typically with guidance. **Job Description** **Roles and Responsibilities** + Oversight and management of hourly maintenance technicians. + Developing in-depth knowledge of a technical discipline. Uses prior experience and acquired technical expertise to execute policy/strategy. + Basic understanding of key business drivers; uses this understanding to accomplish own work. Good understanding of how work of own team integrates with other teams and contributes to the area. + May have some autonomy to make decisions within a defined framework. Resolves issues in situations that require good technical knowledge and judgment within established procedures. Consults more senior team members for issues outside of defined instructions/parameters. + Ensure that equipment and tools are in good condition for use. Propose plans for preventive maintenance and corrective action. + Oversight and management of front-line maintenance technicians. Typically managing hourly employee populations. + Communicate equipment needs / updates on a daily rhythm to plant leadership. + Uses some level of judgment and has ability to propose different solutions outside of set parameters but with guidance. Uses prior experience and on-the-job training to solve straightforward tasks. Has access to technical skills and analytic thinking required to solve problems. May use multiple internal sources outside of own team to arrive at decisions. + A job at this level is likely to be an individual contributor with proven interpersonal skills or an early people leader who can hire and develop talent. Provides informal guidance to new team members + **2nd Shift:** 3:00 PM - 11:00 PM + **3rd Shift:** 11:00 PM - 7:00 AM + The individual in this role will supervise both shifts. Their primary focus will be on the 2nd shift, but also swing to cover the 3rd shift once or a few times per week as needed. **Required Qualifications** + Bachelor's Degree accredited college or university (or a high school diploma / GED with a minimum of 4 years of experience in Manufacturing or Production Supervision experience) + Minimum of 3 years of Manufacturing or Production Supervision experience **Desired Characteristics** + Humble: respectful, receptive, agile, eager to learn + Transparent: shares critical information, speaks with candor, contributes constructively . + Focused: quick learner, strategically prioritizes work, committed . + Leadership ability: strong communicator, decision-maker, collaborative + Strong oral and written communication skills. + Demonstrated ability to analyze and resolve problems. + Established project management skills. + Ability to influence others and lead small teams on initiatives of moderate scope and impact. + Ability to coordinate several projects simultaneously. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Corporate DT AI Catalyst will partner closely with the business to define and drive its most critical AI use cases. This executive will develop strong relationships with cross-functional stakeholders to best understand each departments' needs and develop the ideal AI roadmap for Corporate Functions Leaders including Trailing Operations. The AI Catalyst will serve as an AI thought leader and change agent across the business, helping ensure leaders and teams understand the added value the AI initiatives, tools, and best practices will ultimately bring to each function and product. Additionally, the AI Catalyst will lead seamless implementation & change management of all AI-powered solutions across Corporate DT, ensuring strong adoption impact and promoting a culture of continuous improvement & innovation firmwide. **Job Description** **Key Responsibilities:** + Defines and prioritizes AI use cases based on business needs. Collaborates with various departments to understand their challenges and opportunities and develop a roadmap for AI initiatives that deliver measurable business value. + Helps business leaders and teams understand how to use AI. Provides training and resources to ensure a comprehensive understanding of AI concepts, tools, and best practices, enabling informed decision-making and effective implementation. + Facilitates adoption of AI-enabled solutions within the company. Work closely with stakeholders to ensure seamless adoption, address any resistance or concerns, and promote a culture of innovation. + Monitors the performance and impact of AI initiatives, adjusting as needed to optimize outcomes and drive continuous improvement. + Key Leader in Data Organization & Protection: Oversee data architecture, engineering, platforms, and governance, ensuring a robust, scalable, and secure data ecosystem. + Cross-Functional Leadership: Collaborate with engineering, digital, product, and business leaders to embed AI and data-driven decision-making across the organization. + Regulatory & Ethical AI Governance: Ensure AI solutions meet industry, regulatory, and ethical standards, particularly in aerospace and defense applications. **Required Qualifications / Experiences** + Bachelor's degree in computer science, STEM Majors (Science, Technology, Engineering, and Math), or equivalent experience. + Minimum of 7 years of professional experience in IT leadership roles, with at least 5 years of experience leading global teams. + Proven expertise in designing and deploying enterprise-level data management / AI solutions. + Demonstrated ability to lead and influence cross-functional teams in a matrixed environment. + **Note** : Military experience is equivalent to professional experience **Eligibility Requirement:** + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job. The base pay range for this position is $176,000- $293,300. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on December 31, 2025. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs ( _i.e_ ., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. **Qualifications:** + Data Management, Interpretation and Processing: Adept at organizing, analyzing, and transforming data to extract meaningful insights and support informed decision-making. + Cloud Computing: Experience with cloud platforms like AWS, Google Cloud, and Azure for deploying and scaling AI solutions. + Business Acumen: Understands business operations, market dynamics, and financial principles to make strategic decisions. Operational Excellence: Executes business processes efficiently and effectively to achieve optimal business performance. + Experienced in Programming Tech & Tools: Expertise in languages such as Python, R, and SQL. + Strong Program Management & Organizational Skills: Spearhead all dimensions and layers within the organization to deliver on time, on budget solutions and deliverables. + Team player who prioritizes customer solutions and business objectives and unyieldingly leverages lean practices (FLIGHT DECK, GE's proprietary lean operating model) + Multi-faceted data science expert-capable of operating at a strategic level while also being hands-on ("Go to Genba") to collaboratively solve problems. + Embodies GE Aerospace's 'One Culture' characteristics: + Passionate Innovator - Drives AI and data-driven innovation to create new business opportunities. + Developer of World-Class Talent - Builds and nurtures high-performing AI and data teams. + Accountable Owner - Takes full ownership of initiatives with a focus on execution and results. **Key Competencies:** + Strategic Business Acumen + Change Leadership & AI Advocacy + Innovative Problem-Solving + Cross-Functional Influence and Collaboration + Operational Excellence - leading programs and initiatives to deliver measurable results + AI/ML/Data Science Proficiency + Data Management, Interpretation and Processing + Cybersecurity and Risk Management + Cloud Computing platforms, managing AI solutions efficiency & effectively + Programming Language Proficiency _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Responsible for operating in alignment with FLIGHTDECK Fundamentals and Behaviors to create a clear strategic direction for development needs and convey that vision to the DevOps team. You will direct the team that manages an IFS ERP environment with a clear and descriptive set of requirements, balancing the need for new features, defect resolution, operational rigor and technical debt. This role prioritizes seamless integration and alignment of perspectives from a broad set of stakeholders: Product Managers, Technical Architects, Product Owners, and Developers. Additionally, you will manage government contract commitments, oversee the financials associated with those commitments, and collaborate with GE Aerospace Program Managers to integrate digital warehouse, inventory, and MRO capabilities into sustainment contracts. **Job Description** **Roles and Responsibilities** **In this role, you will:** + Activate FLIGHTDECK Fundamentals to drive Safety, Quality, Delivery, and Cost (SQDC) excellence in product development and execution. + Demonstrate superior product and industry knowledge, helping the organization gain a competitive edge through customer-driven execution. + Interact with customers/stakeholders to gather Voice of Customer (VOC) requirements, refine priorities, and obtain product feedback. + Collaborate with cross-functional teams to deliver features and major, complex products using Value Stream Management to eliminate waste and optimize delivery. + Possess a deep understanding of the technology stack and its impact on the final product, ensuring alignment with Standard Work principles. + Routinely collaborate with UX, Architecture, and engineering teams to resolve issues and make decisions that align with FLIGHTDECK Behaviors: Respect for People, Continuous Improvement, and Customer Driven. + Conduct customer and stakeholder interviews, elaborating on personas and driving customer-focused prioritization. + Own the release and sprint backlogs, ensuring readiness for multiple releases in a year. + Continuously prioritize backlog items based on customer needs and problem validation. + Demonstrate strategic expertise in problem decomposition and navigating ambiguity using structured problem-solving techniques. + Engage frequently with the development team (50% of the time), facilitating discussions, providing clarification, story acceptance, refinement, testing, and validation. + Translate unstructured or ambiguous work requests into actionable user stories and work units, leveraging Action Planning to ensure alignment with KPIs and TTIs. + Partner with Development Leadership to ensure a healthy development process and adherence to Operating Cadences. + Manage government contract commitments, ensuring compliance with timelines, deliverables, and reporting requirements. + Oversee the financial performance of government contracts, ensuring alignment with budgetary goals and strategic objectives. + Collaborate with GE Aerospace Program Managers to integrate warehouse, inventory, and MRO digital capabilities into sustainment contracts, driving efficiency and customer value. + Mentor junior team members and provide technical leadership to TPMs across the organization, coaching others in Agile Methodology and lean principles. **Minimum Qualifications:** + Bachelor's degree from accredited university or college with minimum of 5 years of professional experience OR Associates degree with minimum of 8 years of professional experience OR High School Diploma with minimum of 10 years of professional experience + Minimum 5 years of professional experience in Technical Product Management + Note: Military experience is equivalent to professional experience **Eligibility Requirement:** + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job. **Technical Expertise:** + Experience working in an Agile environment, with familiarity in Flow/Pull principles. + Demonstrates knowledge on technical topics such as caching, APIs, data transfer, scalability, and security. + Familiarity with managing an ERP solution, specifically IFS. **Business Acumen:** + Skilled in breaking down problems, documenting problem statements, and estimating efforts using FLIGHTDECK. + Demonstrates the initiative to explore alternate technology and approaches to solving problems. + Skilled in negotiation to align stakeholders and communicate a single perspective to the DevOps team. + Demonstrates knowledge of the competitive environment and technologies in the market to make buy vs. build recommendations, scope MVPs, and drive market timing decisions. **Leadership:** + Influences through others, building direct and "behind the scenes" support for ideas. + Continuously reflects on success and failures to improve performance and decision-making. + Understands when change is needed and participates in technical strategy planning aligned with FLIGHTDECK Behaviors. **Personal Attributes:** + Proactively engages with cross-functional teams to resolve issues and design solutions using critical thinking and structured problem-solving. + Energizes others toward a common vision and goal, maintaining excitement for the process even when setbacks occur. + Innovates and integrates new processes and/or technology to significantly add value to GE Aerospace. **For Candidates in the US:** The base pay range for this position is $131,000 - $218,000 annually. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on January 31st, 2026. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

SummaryThe Military DoD SkillBridge program is an opportunity for Service members to gain valuable civilian work experience through specific industry training, apprenticeships, or internships during the last 180 days of service. SkillBridge connects Service members with industry partners in real-world job experiences under Dept. of Defense Instruction 1322.29. Separating Service members can be granted up to 180 days of permissive duty to focus solely on training full-time with approved industry partners after unit commander (first O-4/Field Grade commander in chain of command) provides written authorization and approval. GE Aviation as a SkillBridge partner offers real-world training and work experience in in-demand fields of work while having the opportunity to evaluate the Service member's suitability for the work. Military DoD SkillBridge participants are not eligible for compensation from GE Aerospace, as they continue to receive military compensation and benefits as active-duty service members.Job Description Job Summary: Assist in developing standardized processes for managing aerospace manufacturing equipment throughout its life cycle from concept initiation, acquisition to disposal. This position emphasizes process development, creation of Standard Operating Procedures (SOPs), process flow mapping, and establishing baseline document requirements for all stages of manufacturing equipment life cycle management. Qualifications / Requirements: Active Military personnel Key Responsibilities: Collaborate with cross-functional teams to define and document machine life cycle management standards for each phase: Concept & Initiation, Design & Development, Production, Support & Maintenance, and Disposal. Develop templates and guidelines to ensure all necessary information-such as technical details, financial analysis, compliance documentation, risk assessments, and supporting data-is standardized and presented clearly for senior level and above decision-making. Support the development of retrofit/replacement cycles and subsystem overhaul programs. Create Standard Operating Procedures (SOPs) to ensure consistency and accountability among stakeholders in life cycle management processes. Design process flow maps to visualize and optimize workflows for each phase of the asset life cycle. Define responsible stake holder requirement for each phase. Desired Skills: Strong analytical and problem-solving abilities. Experience in standards development and process standardization. Knowledge of predictive analytics and preventative maintenance strategies. Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint, etc.). Lean Six Sigma certification or experience with Lean Six Sigma methodologies. Ability to work collaboratively in a team environment. Experience with weapon system program management at the operational and strategic level. Experience with sourcing, contracting, and logistical acquisitions, as well as supportability challenges. Familiarity with DoD 5000 standards and Life Cycle Management principles. Understanding of ROI optimization and cost management strategies. Individuals selected for this internship will have the responsibility and authority to carry out all assigned tasks This role requires access to U.S. export-controlled information. Therefore, for applicants who are not U.S. lawful permanent residents, U.S. Citizens, or have been granted asylee or refugee status (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), employment will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

Do you have a passion for leveraging data, analytics, and AI to drive meaningful change? At GE Aerospace, we are transforming supply chain processes to address one of our most critical business challenges: delivery. As a Staff Enterprise Application Engineer specializing in Palantir, you will utilize your expertise in Palantir Foundry and AWS cloud technologies to design, deploy, and tailor solutions for complex aerospace challenges. In this role, you will build and maintain Foundry pipelines, modular applications, and workflows, while working closely with stakeholders to create cutting-edge solutions using ontology, advanced analytics, and AI. **** **Roles and Responsibilities** + Architect and design sound/supportable technical solutions to complex business requirements + Develop and maintain Foundry pipelines using Pipeline Builder to ingest, transform, and integrate data. + Build modular applications and workflows leveraging Python, and Foundry AIP. + Collaborate with data engineers, analysts, and stakeholders to refine data models and ontology mapping. + Assist in Foundry workshops to guide stakeholders through platform capabilities. + Support testing, debugging, and performance tuning of Foundry applications. + Work with aerospace data to identify patterns, trends, and insights using Palantir Foundry and AWS analytical tools. + Develop custom applications and workflows within Foundry and AWS to address specific challenges. + Ensure data integrity and compliance with aerospace industry standards. + Apply lean methodologies to identify opportunities for process improvement. + Share feedback with Palantir and AWS product teams to enhance tools and workflows. + Provide technical coaching and direction to more junior teammates. **Technical Qualifications** + Strong experience in Python, PySpark, and front-end frameworks like React, Angular, or Vue.js. + Experience with Pipeline Builder, AIP, and Foundry's application development ecosystem. + Proficiency in AWS cloud services such as EC2, S3, Lambda, RDS, and CloudFormation. + Experience with Git-based code repositories and CI/CD workflows. **Minimum Qualifications** + Bachelor's degree from accredited university or college with minimum of 4 years of professional experience OR associate's degree with minimum of 7 years of professional experience OR High School Diploma with minimum of 9 years of professional experience + Minimum 3 years of professional experience in Computer Science or "STEM" Majors (Science, Technology, Engineering and Math) + **Note:** Military experience is equivalent to professional experience The base pay range for this position is $110,700- $184,600. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on October 31, 2025. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs ( _i.e_ ., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. **Eligibility Requirement:** + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job. **Desired Characteristics** + Ability to operate in an ambiguous environment as we establish this transformation program and define roles & responsibilities. + Demonstrated ability to quickly understand new concepts and analyze system deficiencies + Passionate about security and the quality of the applications they support + Organized, thorough, and detail oriented + Collaborates well with others to solve problems and actively incorporates input from various sources + Eager to learn, shares ideas, encourages and accepts feedback well + Strong analytical skills - strong problem-solving skills, communicates in a clear and succinct manner and effectively evaluates information / data to make decisions; anticipates obstacles and develops plans to resolve + Demonstrated customer focus - evaluates decisions through the eyes of the customer; builds strong customer relationships and creates processes from the customer's viewpoint + Experience working with an offshore development team + High level of energy and enthusiasm, with the ability to thrive in a dynamic, fast-paced setting + Comfortable with empowering colleagues and inspiring others to be their best **Note:** To comply with US immigration and other legal requirements, it is necessary to specify the minimum number of years' experience required for any role based within the USA. For roles outside of the USA, to ensure compliance with applicable legislation, the JDs should focus on the substantive level of experience required for the role and a minimum number of years should NOT be used. This Job Description is intended to provide a high-level guide to the role. However, it is not intended to amend or otherwise restrict/expand the duties required from each individual employee as set out in their respective employment contract and/or as otherwise agreed between an employee and their manager. **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Are you interested in being part of an innovative team that supports Westinghouse's mission to provide clean energy solutions? At Westinghouse, we recognize that our employees are our most valuable asset and we seek to identify, attract and recruit the most qualified talent while recognizing and encouraging the value of diversity in the global workplace. About the role: As a Equipment Operator you must be able and willing to learn how to use lawn equipment (i.e. zero turn tractor, and other lawn equipment). You will report to the Site manager and be located at the Sutton Fossil station in Wilmington ,NC. Key Responsibilities: * Ability to use lawn equipment * Able to use how to use zero turn tractor * Able to travel when needed Qualifications: * Pass a drug test * Pass a security background check * Valid drivers license We are committed to transparency and equity in all of our people practices. The hourly pay for this position, which is dependent upon experience, qualifications and skills, is estimated to be $18 per hour. Code: RT Code: NW Why Westinghouse? Our benefits package is tailored to meet the diverse needs of our employees, while also promoting wellness and career growth. The following are representative of what we offer: * Comprehensive Medical benefits which could include medical, dental, vision, prescription coverage and Health Savings Account (HSA) with employer contributions options * Wellness Programs designed to support employees in maintaining their health and well-being including Employee Assistance Program providing support for our employees and their household members * Paid Vacations and Company Holidays * Global Recognition and Service Programs to celebrate employee accomplishments and service Westinghouse Electric Company is the global nuclear energy industry's first choice for safe, clean, and efficient energy solutions. We enable our delivery of this vision by living our value system: * Safety and Quality * Integrity and Trust * Customer Focus and Innovation * Speed and Passion to Win * Teamwork and Accountability While our Global Headquarters are located in Cranberry Township, PA, we have over 11,000 employees working at locations in 19 different countries. You can learn more by visiting

The GE Aerospace Edison Works Transformation team is focused on contemporizing today's business processes with sustainable digital solutions, thus enabling strategic process transformation. This organization is responsible for partnering with our Digital Technology (DT) organization to drive internal transformation of the GE Edison Works Supply Chain and business processes. This pivotal role is part of a team leading a strategic Enterprise Manufacturing & Assembly Transformation initiative, focused on 1) Contemporizing current business processes with a sustainable digital solution through connected ERP, PLM and Manufacturing Execution Systems (MES). 2) Partner with stakeholders and our Digital Technology (DT) organization to manage process change, digital transformation. The role will engage with our supply chain users across part families, shop operations, materials, quality, finance and partner with DT as well as other strategic transformation pillars. High levels of operational judgment are required to achieve outcomes required. Roles and Responsibilities: * Define manufacturing & assembly business processes including specific processes with information flow between MES and ERP/PLM. * Define relevant shop floor operations requirements, Value stream and Process mapping to clarify operational processes to relevant stakeholders. * Document user requirements, coordinate creation of acceptance criteria for business needs, verify prioritization and coverage of requirements in product roadmap. * Develop and document standard work by collaborating with cross functional teams and systems integrators, and drive continuous improvement of standard work as applicable for functional area to incorporate learnings. * Project/Program manage digital transformation projects across stakeholders including shop floor users & business solution implementation teams (internal and external). * Collaborate across Edison Works enterprise business system architecture implementations to ensure successful implementation of DT solutions. * Partner with other GE Aerospace partners, to define current state requirements and constraints, and help define manufacturing operations strategy and leverage industry best practices. Required Qualifications: * Bachelor's degree from an accredited university or college. * A minimum of 5 years of engine assembly, component manufacturing, aviation quality shop floor management/process improvement experience in the Aerospace/Manufacturing industry OR relevant experience in Supply Chain software solution deployment. * As this role requires a US Government Secret-level clearance, the successful candidate must be able to obtain and maintain a clearance. * Must be a US Citizen * Desired Characteristics: * Strong Technical Project/Program Management Skills. Demonstrated ability to lead programs / projects. * Strong oral and written communication skills. Strong interpersonal and leadership skills. * Demonstrated ability to analyze and solve problems. * Good understanding of business processes of Manufacturing Execution Systems (e.g iBASEt Solumina or any equivalent), and associated user's pain points/needs/improvement opportunities. * Prior Experience with integrated process flows between ERP, MES and PLM systems (e.g. Part definition, Routings, life cycle of Work order and its attributes etc.) * Humble: respectful, receptive, agile, eager to learn * Transparent: shares critical information, speaks with candor, contributes constructively * Focused: quick learner, strategically prioritizes work, committed * Leadership ability: strong communicator, decision-maker, collaborative * Problem solver: analytical-minded, challenges existing processes, critical thinker * The salary range for this position is $ 117,200.00 - 156,300.00 USD Annual. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. This posting is expected to close on November 28th. * GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

Perform a variety of physical and chemical inspections including; macro etch, chemical clean, fluorescent penetrant, white light (visual), and magnified inspections on all types of parts, assemblies and tools. Handle parts, perform close inspections, denote non-conformances and document and reject parts as required. Prepare and/or check inspection solutions and agents, clean parts before and after inspection, operate all related inspection equipment and material handling devices. Maintain records and perform related duties. Job Description About GE Aerospace Are you ready to elevate your future? You'll be warmly welcomed at GE Aerospace where we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components and integrated systems that power commercial and military aircraft. You'll be part of a team that embraces your drive, your curiosity, and your unique ideas and perspectives. You'll learn and achieve as part of an on-going LEAN transformation. And, most importantly, you'll share in our pride and purpose that affects the lives of millions around the world. Working at our Wilmington Facility For more than 22 years our manufacturing facilities in Wilmington have helped fuel the growth and success of GE Aerospace. With 600,000 sq2 of manufacturing space and an advanced mix of 300+ CNC machines/ 21 special processes we're producing high quality rotating parts for commercial and military aircraft engines. When GE Aerospace introduces advanced new technologies like the LEAP and 9x Engines, our team has outstanding opportunities to contribute. The parts and components we manufacture include Blisks, Small Spools, Welded Spools, CFM HPT Disks, and a variety of large parts that can be found in a wide range of today and tomorrow's high-performance engines. We're the career home of 500+ employees who seek purpose and challenge in their careers. People just like you. ESSENTIAL RESPONSIBILITIES: * Perform both physical and chemical inspections including: macro etch, chemical clean, fluorescent penetrant, white light (visual), and magnified inspections on all types of parts, assemblies and tools. * Inspect, evaluate and document process results. * Maintain system chemicals at proper levels. * Test and evaluate control panels as required. * Clean parts before/after inspection. * Load/unload various parts using stacker/lifting device. * Operate large parts FPI/Clean Room. * Obtain and maintain level II Certification * Pass and maintain current eye exam to Jaeger requirements * Train new operators as required. * May do minor maintenance. * Continuous visual concentration is necessary to inspect, evaluate and document. * Operator required to receive 400 hours of mandatory training and pass certification exams WORKING CONDITIONS * Chemically intense environment including; emulsifiers, acids, liquid penetrants, fine powder developers, compressed air, heating elements, and high pressure steam. Safety glasses required and sometimes face shields required. This is also a hearing conservation area, with ear protection recommended QUALIFICATIONS/REQUIREMENTS * High School diploma or equivalent. * Must be able to read and interpret blueprint and engineering drawings and be able to document non-conformances. * Must have basic shop math with the ability to add, subtract, multiply, divide and calculate fractions and decimals. * Must have basic computer skills. * Must be able to push, pull or lift parts up to 50 lbs. utilizing proper ergonomic procedures. * Operator is required to stand 90% of the time, stooping, bending, and stretching is also necessary to complete inspections DESIRED CHARACTERISTICS * Prior certification and/or documented training in Fluorescent Penetrant Testing in accordance with NAS-410 or T049. * Associate degree in Machining Technology or equivalent degree. * Prior Aircraft Engines operations experience. * 2 years of previous manufacturing experience and previous, documented Fluorescent Penetrant experience This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

**Cardiovascular Health and Science Professional (HSP) - Wilmington, NC** All over the world, Pfizer colleagues work together to positively impact health for everyone, everywhere. Our colleagues can grow and develop a career that offers both individual and company success; be part of an ownership culture that values diversity and where all colleagues are energized and engaged; and can impact the health and lives of millions of people. Pfizer, a global leader in the biopharmaceutical industry, is continuously seeking top talent who are inspired by our purpose to innovate to bring therapies to patients that significantly improve their lives. Pfizer has a deep heritage and leadership in cardiovascular disease, and we are committed to providing breakthroughs that change patients' lives. An integral part of Internal Medicine, the Cardiology (CARD) Team's mission is to promote a breakthrough therapy for patients suffering from NVAF or VTE. The CARD Health & Science Professional (HSP) is responsible for increasing territory sales and relationship development with assigned customers and accounts by engaging in product promotion and determining the best strategies to manage their business. A CARD HSP should possess customer, market, and business acumen, analytical skills, and strong product and disease state knowledge; demonstrate ability to drive sales, promotional and strategic business development and management skills, and in-depth customer engagement expertise both in-person and virtually; demonstrate outstanding communication and teamwork skills; be adept in the operation of digital and virtual tools; and be effective at working remotely in collaboration with cross-functional internal teams to address customer needs and compliantly deliver on Pfizer business objectives. **ROLE RESPONSIBILITIES** + Drives sales in assigned territory. + Engages with customers both face to face and virtually. + Develops and implements effective business and territory call plans; effectively identifies and implements live/virtual engagement strategies with customer to maximize overall effectiveness and impact. + Effectively builds rapport and relationships with customers in both live and virtual environments; uses judgment to maintain customer engagement by successfully utilizing existing and ever-changing digital tools effectively for successful customer engagement. + Understands and leverages internal reports and analytics to assist with identifying, developing, and implementing strategic business opportunities. + Compliantly leverages product and disease state knowledge to appropriately educate providers on unbranded and branded product value proposition for relevant patient populations and effectively and strategically utilizes approved clinically oriented disease state information and patient resources, as applicable. + Demonstrates strong teamwork capabilities to collaborate effectively and compliantly across the organization to address customer inquiries and advance Pfizer objectives. + Completes all administrative expectations on time and compliantly. **BASIC QUALIFICATIONS** + Bachelor's Degree. + Minimum 2 years of experience in one or more of the following; OR an associate's degree with 6+ years of experience; OR high school diploma (or equivalent) with 8+ years of **relevant** experience.- Professional Sales or Promotional Activity.- Small Business Owner or other Entrepreneurial experience, Marketing, Customer Service and/or Account Management.- Relevant Healthcare/Scientific roles (e.g., RN, Pharmacist, PT, OT, etc.).- Educator (e.g., Teacher, Principal).- Full Time Military experience. + Must live within 25 miles of the border of the territory. + Valid US driver's license and driving record in compliance with company standards. Any DUI/DWI or other impaired driving citation within the past 7 years will disqualify you from being hired. **PREFERRED QUALIFICATIONS** + 1 year of pharmaceutical, biotech, medical sales and/or medical related marketing. + Strong track record of sales or marketing success, strong territory management skills, outstanding communications skills, as well as demonstrated teamwork, leadership ability and accountability. + Experience with applicable disease states, therapeutic area, and products. + Knowledge of posted territory customers and markets (prescribers/HCPs/institutions/organizations). + Reside within the territory boundaries. **NON-STANDARD WORK SCHEDULE, TRAVEL OR ENVIRONMENT REQUIREMENTS** + Ability to travel to all accounts/office locations within territory. + Depending on size of territory and business need, candidates may be required to stay overnight as necessary. **OTHER JOB DETAILS** + Last Date to Apply: January 26, 2026. + Geography includes: Wilmington, New Bern, Jacksonville, and Kinston in North Carolina. + Work Location Assignment: Remote - Field Based. The annual base salary for this position ranges from $85,000 - $186,700. **During initial new hire sales training, you will be classified as a salary non-exempt employee which entitles you to overtime pay. Upon your training certification, you will become an overtime exempt employee.** In addition, this position offers an additional quarterly Sales Incentive bonus. We offer comprehensive and generous benefits and programs to help our colleagues lead healthy lives and to support each of life's moments. Benefits offered include a 401(k) plan with Pfizer Matching Contributions and an additional Pfizer Retirement Savings Contribution, paid vacation, holiday and personal days, paid caregiver/parental and medical leave, and health benefits to include medical, prescription drug, dental and vision coverage. Learn more at Pfizer Candidate Site - U.S. Benefits| (uscandidates.mypfizerbenefits.com). Pfizer compensation structures and benefit packages are aligned based on the location of hire. The United States salary range provided does not apply to any location outside of the United States. Relocation assistance may be available based on business needs and/or eligibility. **Sunshine Act** Pfizer reports payments and other transfers of value to health care providers as required by federal and state transparency laws and implementing regulations. These laws and regulations require Pfizer to provide government agencies with information such as a health care provider's name, address and the type of payments or other value received, generally for public disclosure. Subject to further legal review and statutory or regulatory clarification, which Pfizer intends to pursue, reimbursement of recruiting expenses for licensed physicians may constitute a reportable transfer of value under the federal transparency law commonly known as the Sunshine Act. Therefore, if you are a licensed physician who incurs recruiting expenses as a result of interviewing with Pfizer that we pay or reimburse, your name, address and the amount of payments made currently will be reported to the government. If you have questions regarding this matter, please do not hesitate to contact your Talent Acquisition representative. **EEO & Employment Eligibility** Pfizer is committed to equal opportunity in the terms and conditions of employment for all employees and job applicants without regard to race, color, religion, sex, sexual orientation, age, gender identity or gender expression, national origin, disability or veteran status. Pfizer also complies with all applicable national, state and local laws governing nondiscrimination in employment as well as work authorization and employment eligibility verification requirements of the Immigration and Nationality Act and IRCA. Pfizer is an E-Verify employer. This position requires permanent work authorization in the United States. Pfizer endeavors to make ********************** accessible to all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process and/or interviewing, please email disabilityrecruitment@pfizer.com. This is to be used solely for accommodation requests with respect to the accessibility of our website, online application process and/or interviewing. Requests for any other reason will not be returned. Sales

WECTEC STAFFING IS CURRENTLY LOOKING FOR JANITORIAL TECHNICIANS FOR THE UPCOMING 2024 OUTAGE AT BRUNSWICK Janitorial Workers responsibilities predominantly include performing cleaning of office areas, shop areas, restrooms, cafeterias, inside and outside entry way areas and in some locations warehouse areas. Normal duties include vacuuming, dusting, sweeping, mopping empting trash and spot cleaning carpet. Office cleaning will often include cleaning carpet and refinishing floors however in most cases this is performed by a person that meets more physical demanding criteria. . Service Workers may be required to operate various power equipment including: * Vacuum Cleaners * Single Disk Floor Machines * Automatic Scrubbers - rider and walk -behind machines * Restroom Cleaning Machines Education / Training Requirements * High School Diploma, GED or Equivalent work experience. * Satisfy all requirements required to obtain a level 1 Nuclear Access Badge * Complete training and testing for areas required for access PAT and RWT as required by the areas assigned to perform the task. * Complete appropriate OSHA training Minimum Skill Requirements and Accountabilities * Meet all applicable requirements to maintain unescorted access * Safe use and proper operation of applicable equipment * Use and adhere to station policies and procedures. * Effectively communicate and interact with co-workers, Supervisors and Sponsors to ensure Safe and Quality job completion for all assignments * Ability to understand and follow oral and written communications, technical requirements, procedures and directives associated with working at a nuclear plant * Ability to travel throughout the station ascending and descending stairs, brief periods of travel through high temperature areas, and deal with outdoor environments * Able to lift 50lbs. Employment opportunities may require access to information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States.

Job ID 489122 Posted since 22-Dec-2025 Organization Mobility Field of work SCM-Procurement / Supply Chain Logistics Company Siemens Mobility, Inc Experience level Early Professional Job type Full-time Work mode Hybrid (Remote/Office) Employment type Permanent * New Castle - - United States of America * Wilmington - - United States of America Pioneering in America, from the first mile to the last. This is what drives us. For more than 160 years, Siemens has been an integral provider of infrastructure, electrification, and transportation solutions in the United States. Rail systems must do one thing above all: run. With modern maintenance solutions - from diagnostics to data-based action recommendations, from quick delivery of replacement parts to strategically planned modernization - we ensure your systems' highest reliability and availability: 100% Railability. We are constantly developing new, intelligent mobility solutions that increase the availability of infrastructure for society, optimize route usage, and create a new quality of travel. Good service means we are there for our partners and customers when they need us - and beyond. That is because we define ourselves by what we do. Every day, every hour, every minute. We help our customers move the world. "We're proud to be Great Place to Work certified-a reflection of our commitment to creating an environment where innovation thrives and every voice matters. Apply today and be part of shaping the future with us!" Position Overview: Siemens Mobility is currently seeking a Repair Buyer within our Customer Services organization in Order Management & Logistics Team. The position will be responsible for the Order Management and execution of the Repair Purchase Orders for our LRVs and Locomotives. The position will work closely with suppliers issuing repair purchase orders and requesting return material authorizations to/from approved suppliers in order to maintain preferred stock levels. This individual will align with our Strategic and Order Management & Logistics Team to monitor supplier performance, supplier quality, and standard lead times as we negotiate terms and conditions. This position will assist Projects in completing the Core Return Process at a tactical level. The position can be based at a Siemens Mobility facility preferably on the east coast to work a hybrid schedule. What your day-to-day will look like: * Complete complex buying strategies to purchase and arrange timely deliveries of supplies and materials; expedite as needed and serve as liaison between vendors and users, getting prior approval for purchases for the established limits, * Resolve complex delivery, quality, or other related topics with purchases, * Work closely with the suppliers on necessary paperwork and information to request return material authorizations, * Work closely with materials and warehouse personnel to ensure shipments to suppliers are completed both systemically and physically in a timely manner, * Update project plans and purchasing systems; review and analyze requisitions and supply plans for domestic and international purchases, * Define, communicate, track scheduling, risk, change, opportunities, and resource management, * Gain alignment on project prioritization and requirements, * Work with cross-functional business partners as well as Supply Chain Management (SCM) network, * Track the vendor's progress against the original and/or revised schedule, regularly monitor and report open orders for confirmation ratio and delivery capability, monitor and report on delivery reliability and on time delivery, * Ensure workflow turnaround time KPI for the Core return process, * Responsible for effectively communicating with cross-functional team members on project status and Supply Chain Management tasks, * Review and target supplier delivery improvements and late order resolution, * Work in conjunction with strategic category management, supplier quality, sales team, project logistics and warehouse personnel toward improving total cost of ownership of products/services, * Leverage existing procurement processes and compliance while seeking to identify the best management practices, improved procurement processes, and other continual improvement initiatives to facilitate efficient processes. To thrive in this role, you have: * High School Diploma / GED * Minimum of 2 years' relevant work experience as a SCM / Buyer / Logistics * Proficient in Microsoft Office applications, strong in Excel application * Excellently demonstrated verbal and written communication skills * Ability to understand/communicate technical data with suppliers as well as internal personnel * Demonstrated success in applying complex knowledge of fundamental concepts, practices, and procedures of particular area of specialization SCM * Excellent customer service skills * Ability to work in a team-oriented environment while maintaining an individual workload * Perform job duties with a sense of urgency * Able to handle stress and make decisions in a challenging situation * Setting you apart from others would be a Bachelor's degree and certificates in SCM/ Logistics and experience in SAP, SharePoint, and Power BI/ Tableau. Why you'll love working for Siemens! * Freedom and healthy work-life balance- Health, Dental, Vision Insurance, HSA/FSA, Commuter Benefits - starting Day 1. * We believe that each member of our team is accountable for making decisions, solving problems, and taking actions that contribute to long-term impact and financial success. * We do the right thing. We stand for green innovations and meaningful solutions with impact on customers, ecosystem partners, society, and environment. * We are front-runners in digitalization and building platforms. Therefore, we are hiring ambitious forward-thinkers who want to have a real impact. * Solve the world's most significant problems - Be part of exciting and innovative projects. * Opportunities to contribute your innovative ideas and get paid for them. Take advantage of our Tuition Reimbursement program, Mentor Programs, and your development through online learning. We operate daily with a growth mindset - that's why Siemens consistently ranks on the Fortune World's Most Admired Companies list! * Employee perks and discounts in addition to our 401k match and generous Paid Time Off. Applicants must be legally authorized for employment in the United States without needing current or future employer-sponsored work authorization. #LI-LS1 #LI-Onsite You'll Benefit From Siemens offers a variety of health and wellness benefits to our employees. Details regarding our benefits can be found here: ***************************************************** The pay range for this position is $66,708.00 - $86,190.00 annually. The actual wage offered may be lower or higher depending on budget and candidate experience, knowledge, skills, qualifications, and premium geographic location. Equal Employment Opportunity Statement Siemens is an Equal Opportunity Employer encouraging inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. EEO is the Law Applicants and employees are protected from discrimination on the basis of race, color, religion, sex, national origin, or any characteristic protected by Federal or other applicable law. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please fill out the accommodations form by clicking on this link Accommodation for disability form. If you're unable to complete the form, you can reach out to our AskHR team for support at **************. Please note our AskHR representatives do not have visibility of application or interview status. Pay Transparency Siemens follows Pay Transparency laws. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Criminal History Qualified applications with arrest or conviction records will be considered for employment in accordance with applicable local and state laws.

FieldCore is looking for an exceptional Turbine Mechanic to join our craft field team! About GE Vernova GE Vernova is a planned, purpose-built global energy company that includes Power, Wind, and Electrification businesses and is supported by its accelerator businesses of Advanced Research, Consulting Services, and Financial Services. Building on over 130 years of experience tackling the world's challenges, GE Vernova is uniquely positioned to help lead the energy transition by continuing to electrify the world while simultaneously working to decarbonize it. GE Vernova helps customers power economies and deliver electricity that is vital to health, safety, security, and improved quality of life. GE Vernova is headquartered in Cambridge, Massachusetts, U.S., with more than 80,000 employees across 100+ countries around the world. GE Vernova's Gas Power business engineers advanced, efficient natural gas-powered technologies and services, along with decarbonization solutions that aim to help electrify a lower carbon future. As part of the Gas Power One Field Services team, FieldCore installs, maintains and upgrades power generation equipment, enabling operators of the world's energy infrastructure to provide more reliable and affordable energy. Let's Talk about the Role The primary responsibility of the Steam/Gas Mechanic is to safely accomplish the installation, maintenance and repair of the heavy rotating machinery used mainly in power generation applications. Turbine Mechanics work closely with Supervisors, EHS personnel, and the Operations Department to achieve these goals. You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization's core values. How You Will Make a Difference * Dismantle, assemble, move and align, machinery and equipment using: hoists, cranes, chain falls, hand tools, power tools, pneumatic and hydraulic tools, micrometers, rules, squares, plumb bobs, dial indicators and/or laser alignment equipment * Read blueprints, schematic drawings and technical documentation to determine proper work procedures * Responsible for shipping and receiving all major pieces for T&DC, plus all shipping, receiving, inventory, and control of tools, equipment and supplies * Perform material and machine inspections using precision measuring equipment such as micrometers, rules, calipers, protractors, and torque wrenches * Perform machining and welding operations for making various parts for lab and shop training equipment * Determine equipment specifications and prepare parts lists for purchasing, consisting of mechanical, electrical, and hydraulic devices as needed to complete assigned projects * Load, transport, and unload materials, tools, equipment and supplies and perform mechanical and electrical maintenance and repairs as needed * Read blueprints, schematic drawings and technical documentation to determine proper work procedures * Install machinery and equipment according to layout plans, blueprints and other drawings in industrial establishments * Ability and willingness to work holidays, weekends and overtime as required by field assignments. Special Role Requirements: * Minimum of one (1) years' experience maintaining, dismantling, and installing machinery and industrial service equipment including various pumps, motors, fans, generators, and turbines * Valid Driver's License * Preferred: Degree/Associate Degree in Technical Field or Gas Turbine Systems * Willing to work 12 hours on Day or Night Shift. * 100% travel is required What's in it For You (Compensation and Benefits) The hourly wage range for this position is $25.00. Employees may be eligible for overtime. FieldCore benefits include insurance (medical, dental, vision, disability, and life), retirement savings, health and Wellness reimbursement, and a bonus or incentive program. Eligibility for FieldCore benefits is determined under the terms of the applicable benefits plan. * All Training is paid for (online courses and in-person) * 100% of GSA Per Diem Rate. * Quarterly Kahuna Competency Review/Raises (get .25 cents once 20% is completed) * Career Paths for advancement (control over own promotions, training, learning) * Boot reimbursement * Glasses Reimbursement * TWIC Card Reimbursement * OSHA 10/30 Reimbursement * Access to state-of-the-art technology & tooling * Most advanced classroom & hands on training center (industry leading curriculum) * Ability to travel the world if you so desire * Career paths that extend beyond the Field within the company We're determined to be the best place to grow People are the heart of our organization and we put them first in everything we do. From professional development to a wide range of training opportunities, we continually strive to create an empowering and healthy place to work. Combining our values of growth and World-Class Execution is what sets our workplace apart from the rest. Only FieldCore can offer this wide range of opportunities across the power generation industry, combined with excellent career paths in technical, functional and leadership areas. Inclusion & Diversity We are passionate about creating an inclusive work environment. By valuing the ideas and contributions of a diverse workforce we help inspire others to grow, succeed, and raise the bar for everyone. FieldCore is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sex, national origin, age, veteran status, status as a qualified individual with a disability, marital status, pregnancy, sexual orientation, ancestry, genetic information, gender identity, or any other characteristic protected by law Join us at FieldCore where results can be achieved by embracing a community of belonging.

WECTEC STAFFING IS CURRENTLY LOOKING FOR MATERIAL HANDLERS FOR THE UPCOMING 2024 OUTAGE AT BRUNSWICK Material Handler Perform material handling functions in and around the station in accordance with established company standards and procedures. This could encompass tasks such as simple hand tasks to operation of large pieces of industrial equipment to facilitate the movement of various materials into, out of, and around site buildings and structures. This function is intended to support the local Site Coordinator and is typically associated with nuclear station outage activities. Activities will frequently require a potential candidate to assess the assigned task for safety concerns, proper support equipment application, and adherence to established company procedures. Prior experience at a Duke Power nuclear facility is desired. Education / Training Requirements * High school diploma or equivalent * Meet all applicable requirements to maintain unescorted access * Pass initial and annual Radiation Worker Training * Minimum of five years mechanical maintenance experience in an industrial setting (may be reduced to three years if individual has worked specifically in the rigging / crane operations area) (SR Material handler) * Specific training for this activity includes (but not limited to): * Pendent Crane * Site Specific Maintenance Procedures * Basic Rigging (Duke Power specific) * Scaffold Installation/Removal Qualifications * Independent Component Verification Minimum Skill Requirements and Accountabilities * Follow safe work practices * Effectively communicate and interact with co-workers, Supervisors, and Purchaser's staff to ensure safe and quality job completion for all assignments * Use administrative documents, procedures, data sheets/forms properly. * Read and interpret procedures and drawings * Perform work in a professional (neat and orderly) fashion Employment opportunities may require access to information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States.

GE Aerospace's US Pay & Time Center of Excellence (COE) is a team of dedicated specialists focused on delivering accurate and timely payroll and time & attendance services for exempt and non-exempt employee populations. The team ensures seamless integration and alignment of payroll and time & attendance processes with broader organizational goals, establishing standard work and governance to leverage best practices and support the successful preparation, processing, and documentation of payroll. The US Senior Pay & Time Manager role is a critical leadership position responsible for overseeing a team of payroll and time & attendance specialists supporting exempt and non-exempt US employee populations across multiple sites and business units. This role drives sets direction and drives strategic initiatives to ensure timely, accurate, and compliant payroll processing, enabling employees to focus on delivering excellence in safety, quality, delivery, and cost (SQDC). As a key partner to site leaders and senior stakeholders, the US Senior Pay & Time Manager fosters strong connections across the organization, ensuring alignment with business priorities while using Flight Deck to implement process improvements, standardization, simplification, and operational efficiency. This role leverages best practices from across GE Aerospace and external benchmarks, guiding leaders and the team in creating innovative solutions to enhance payroll systems and practices. This role requires a forward-thinking approach to payroll operations, combining deep technical expertise with strategic leadership to deliver exceptional service and continuous improvement. This role partners closely with HR Managers, Business Leaders, Digital Technology, and other People Operations teams, acting as a liaison across these functions to drive process improvements, enhance system functionality, and ensure compliance with federal, state, and local regulations. You will influence strategy and priorities across sites and programs, ensuring consistent execution and measurable impact on SQDC. As a US Senior Pay & Time Manager, you will be responsible for leading the compliance, productivity and efficiency of the essential service and process delivery of payroll and time & attendance functions. You will provide strategic direction and insight on continuous improvement solutions to evolve and enhance payroll and time & attendance processes and systems, and you will build leadership capability to sustain results. Additionally you will be responsible for serving as a peer mentor to other team leaders in the NAM organization. **Job Description** **Essential Responsibilities:** + Ensuring pay is processed on time, accurately and in compliance with government regulations. + Leading a high-performing team, developing the team's technical proficiency, making training and development opportunities available and achievable. + Partner with others such as site leaders, vendors, HR Partners, Total Rewards, and People Ops teams on compliant and sustainable design, implementation, and governance of pay practices, resolving complex escalations and risk. + Manage the partnership with Digital Technology and time and attendance application support to provide feedback and direction on the time and attendance system road map & strategy, and partner on implementation and maintenance. + Drive process improvements and implement strategic initiatives. + Resolving complex escalations and risk, explaining complex payroll concepts to a range of employee personas from executives to HR to production employees in a clear and approachable manner. + Implement standard work for pay & time processes & procedures. + Building strong cross-functional relationships and executive stakeholder management; aligning objectives and resources across functions; surfacing risks with mitigation plans. + Analyzing payroll data and metrics to identify trends and opportunities for improvement, leading root cause analysis; translating insights into action plans with measurable outcomes. + Managing over/underpayment processes and partnership with HR and Union Relations / Employee Relations teams to ensure appropriate action. + Provide insight on team strategy and continuous improvement solutions. + Identifying opportunities and pain points, offering solution design options to improve payroll and time & attendance processes. + Providing payroll and time & attendance expertise and leadership during M&A activities. + Translating strategies into action plans and align team priorities to the business. + Obtaining certification in either Workday, Time System or Payroll within one year in role to ensure appropriate level of technical leadership for role. + Serve as a peer mentor to other team leaders in NAM organization. **Qualifications/ Requirements:** + Bachelor's degree in Business Administration, Finance, Human Resources, or a related field from an accredited university with minimum of 5 years of experience in HR Function and/or Payroll/Time & Attendance area, or a high school diploma / GED with at least 9 years of experience in HR Function and/or Payroll/Time & Attendance area. + Expertise in Workday Payroll, time & attendance systems and integration with payroll processes. + Strong knowledge of federal, state, and local payroll regulations, including FLSA, tax compliance and reporting. + Willing to travel as needed up to 15%. **Desired Characteristics:** + Certified Payroll Professional (CPP), Fundamental Payroll Certification (FPC), Workday, or time system certification. + Strong problem-solving skills to address complex payroll challenges. + Excellent executive communication and stakeholder management skills; ability to engage employees, leaders, and external partners. + Willingness to deep dive into current time and attendance site practices and develop strategy and execute resulting in standardization of work across sites. + Serve as a role model continuous improvement behaviors needed to encourage and embed change. + Strong interpersonal and leadership skills. + Strong problem solving and troubleshooting skills; solutions-oriented approach + Experience in managing internal & external audits. + Ability to manage and prioritize multiple urgent deliverables; experience in a matrixed leadership environment. + Experience with managing people virtually or a geographical dispersed team. **Pay and Benefits:** + The base pay range for this position is $117,000 - 160,000. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on November 7th, 2025. + GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

SummaryAre you ready to elevate your career in a dynamic and innovative environment? As a CNC Machine Operator, you will play a crucial role in setting up and operating multi-axis CNC/NC machines, often running multiple machines simultaneously. Your work will involve handling a variety of metals and parts with close tolerances and fine finishes. Utilizing complex measuring devices such as micrometers, calipers, indicators, and special purpose gages, you will generate and check part dimensions during various machining stages with precision. Your expertise in precise indicating on parts, where true indicator reading (TIR) and four-point indication are critical, will ensure the highest quality standards are met.Job Description At GE Aerospace, we believe the world works better when it flies. As a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft, we are at the forefront of advancing aviation technologies for today and tomorrow. Joining GE Aerospace means bringing your unique perspective, innovative spirit, drive, and curiosity to a collaborative and diverse team that values your ideas and listens to your voice. You will be part of our ongoing LEAN transformation, working smarter, not harder, and contributing to work that truly matters. Here, you will elevate your future, share in our pride and purpose, and make a real impact on the lives of millions around the globe. If you believe in the power of flight and want to be part of a spirited and collaborative team, come aboard and help us lead the way Working at our Wilmington Facility For more than 22 years, our manufacturing facilities in Wilmington have been the driving force behind the growth and success of GE Aerospace. With 600,000 square feet of manufacturing space and an advanced mix of over 300 CNC machines and 21 special processes, we produce high-quality rotating parts for commercial and military aircraft engines. Our team plays a crucial role in introducing advanced new technologies like the LEAP and 9x Engines, offering outstanding opportunities to contribute to the future of aviation. We manufacture a diverse range of parts and components, including Blisks, Small Spools, Welded Spools, CFM HPT Disks, and various large parts found in today's and tomorrow's high-performance engines. Our facility is the career home to over 500 employees who seek purpose and challenge in their careers-people just like you. Here are just a few of the best reasons to consider joining us: Competitive Compensation: Starting at $33.39 per hour plus, $1.00 shift differential plus cost of living and general wage increases. Sign-on bonus** Comprehensive benefits package, including medical, dental, and vision coverage, as well as generous time off with vacation and holidays starting on Day 1, and additional PTO after one year of service. Relocation Support: Relocation available for offers over 90 miles from our facility. Key Responsibilities: Dimensional Accuracy: Utilize complex measuring devices to generate and check part dimensions during various machining stages, ensuring precision and accuracy. Critical Indication: Perform precise indicating on parts, where true indicator reading (TIR) and four-point indication are essential to the machining process. Record Keeping: Accurately account for your time using the prescribed system, electronically maintain records, logbooks, and charts, and produce electronic or manual reports. Training and Development: Help train operators to use specific equipment, sharing your expertise and fostering a collaborative learning environment. Quality Assurance: Achieve all required tolerances and finishes that meet standards set by Manufacturing Engineering and Quality Assurance, ensuring all characteristics generated at designated operations are conforming through applicable inspection techniques. Certification: Obtain and maintain the CVP certification, with training provided to support your professional growth. Traceability: Accurately serialize parts to maintain traceability at all times, ensuring compliance with industry standards. Team Collaboration: Actively participate in daily team meetings and activities, practicing direct professional communication with team members and contributing to a positive team dynamic. Equipment Operation: Perform set-up and operation of equipment according to drawings, method sheets, and occasionally supplement this information with your own job knowledge. Material Handling: Utilize forklifts, cranes, and material handling equipment to lift or carry objects weighing up to 50 lbs, following proper ergonomic procedures. Required Qualifications: High School Diploma or equivalent Expertise in CNC Machining: Bring your extensive manufacturing experience, with at least 3 years in the setup and operation of CNC machining processes such as drilling, milling, grinding, turning, or broaching, or leverage your 2-year degree from an accredited machinist training program to excel in this role. Proficiency in Technical Interpretation and Precision Measurement: Utilize your skills in reading and interpreting mechanical blueprints and production planning, along with at least 2 years of experience using precision measuring instruments, to ensure the highest standards of quality and accuracy in every task. Join us at GE Aerospace and be part of a team that values innovation, quality, and continuous improvement. Your skills and dedication will make a real impact on the lives of millions around the globe. Apply now and embark on an exciting journey with us! Additional Information: If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation for purposes of participating in the application/hiring process with GE. If you are unable or limited in your ability to apply or interview as a result of your disability, you can request reasonable accommodations by emailing us at accommodation.mailbox@ge.com. Any offer of employment is conditioned upon the successful completion of a drug screen. ** sign-on bonus is offered and awarded to new machine operators upon successful completion of 90 days of employment This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

SummaryThe Industrial HVAC Technician will ensure the safe and efficient operation of site chiller building and HVAC system and machine chiller systems. This role must also be flexible and capable to assist the Equipment Maintenance team in daily management and specialized projects. This role may need to be called in after hours to support.Job Description Roles and Responsibilities: 1. HVAC Maintenance: Perform routine inspections, predictive maintenance, and repairs on HVAC systems and Controls. 2. Preventative Maintenance: Develop and implement preventative maintenance plans to minimize downtime and ensure the reliability of HVAC equipment. Schedule and perform maintenance activities according to established protocols. 3. Troubleshooting: Diagnose and troubleshoot electrical issues, malfunctions, and failures in system. Analyze and resolve complex problems efficiently and safely. 4. Safety Compliance: Adhere to all safety guidelines and regulations while working with energized equipment. Ensure that safety protocols are followed by yourself and the team. 5. Documentation: Maintain accurate records of maintenance activities, equipment inspections, and repairs. Keep up-to-date documentation of HVAC systems, including schematics and diagrams. 6. Emergency Response: Be on-call for emergency HVAC repairs and respond promptly to minimize downtime and safety risks. 7. Collaboration: Collaborate with other maintenance teams and departments to ensure seamless operations and communication regarding electrical systems. 8. Training and Development: Stay current with industry trends, technologies, and best practices in HVAC systems. Provide training and mentorship to junior HVAC Techs. 9. Responsible for machine Chiller preventative maintenance & repair. 10. Actively participate/drive in continuous improvements in area. Qualifications: 1. High school diploma or equivalent required. Shop Math, including Algebra, Geometry, Decimals and Fractions. Ability to demonstrate effective oral and written communication skills. 2. Possess a CFC Certification Card 3. At least 3 years of industrial HVAC experience such a manufacturing or large facility environment. 4. Functional knowledge of National Electrical Code (NEC) 5. Read and interpret complex mechanical and electrical drawings, blueprints, sketches, and schematics.6. Able to handle heavy materials using approved devices such as fork truck, hoists, cranes or manual lifting if in accordance with safety guidelines. 7. Must be able to push, pull or lift parts up to 50 lbs. utilizing proper ergonomic procedures. 8. Must be able to climb stairs/ladders. 9. Must be able to use computers and learn Microsoft Office & Maximo. 10. Must be able to follow written and verbal instructions and communicate effectively in the English language. Desired Characteristics: 1. Experience working in a high-performing team-based environment. Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No