General production manager jobs in Coeur dAlene, ID - 102 jobs

JELD-WEN is currently seeking a General Production to join our growing team. Who we are * VPI Quality Windows is a commercial division of JELD-WEN, Inc. that focuses on manufacturing windows and patio doors for multi-family construction with a particular focus on apartments, dormitories, senior living, and hotels. Job Overview * The primary role of General Production is to perform tasks with a focus on safety, quality, and productivity. * Level 1 General production starts at $21.01/hr with benefits. What We Do * Prepare vinyl lineals for production using a lamination process * Saw and machine vinyl and metal to prepare for window and door assembly utilizing CNC saws and mills. * Assemble and glaze windows and patio doors through an assembly line process. Principal Job Duties and Responsibilities * Be self-motivated and able to work with minimal supervision. * Process-driven with a focus on continuous improvement. * Assists co-workers in analyzing and correcting problems encountered in job assignments to perform work according to standard work procedures and instructions Position Requirements * This role requires consistent physical activity throughout the shift, including lifting, pushing, pulling, and carrying materials weighing up to 50 lbs independently and up to 100 lbs with team assistance. * Work may involve repetitive motions and working in a fast-paced assembly line manufacturing environment * Employees must be able to stand and walk for up to 12 hours per day on hard surfaces. * Frequent bending, reaching, twisting, and climbing may be required to access materials and operate equipment. * Ability to read and interpret production paperwork and labels * Demonstrated proficiency in using metrology instruments and recording inspection data * Personal Protective Equipment (PPE) must be worn at all times, and employees are expected to maintain a safe and clean work area. * Overtime may be required, sometimes on short notice, to meet production goals. * Must meet daily production rates while maintaining quality standards for raw materials, work-in-progress, and finished goods. * Advancement opportunities are available, with a strong emphasis on promoting from within. * Additional tasks may be assigned by the Supervisor or Manager as needed to support operations. * Candidates must be comfortable working with both manual and powered tools commonly used in manufacturing and assembly environments. These include, but are not limited to: * Mallets * Putty knives * Self-retracting knives * Diagonal cutters * Glazing guns * Drills * Saws * Sanders * Vacuum hoists * Mills * Punches * Routers * Pallet jacks Required Skills and Experience * High School Diploma or Equivalent. * Stable work history with preferred 2 - 3 years of manufacturing experience. Recent graduates are encouraged to apply. * Strong verbal and written communications skills. * Proven problem solving and organizational skills. * Works well in a team environment with a diverse workforce. * Ability to perform several tasks concurrently with ease and professionalism. About JELD-WEN Holding, Inc. JELD-WEN Holding, Inc. (NYSE: JELD) is a leading global designer, manufacturer and distributor of high-performance interior and exterior doors, windows, and related building products serving the new construction and repair and remodeling sectors. Based in Charlotte, North Carolina, the company operates across North America and Europe. Our associates are dedicated to bringing beauty and security to the spaces that touch our lives through our market-leading product brands across the world. The JELD-WEN family of brands includes JELD-WEN worldwide, LaCantina and VPI in North America, and Swedoor and DANA in Europe. For more information, visit corporate.JELD-WEN.com or follow LinkedIn. JELD-WEN has been named by Forbes as one of 'America's Best Employers' and by Newsweek as one of the 'World's Most Trustworthy Companies'. What We Offer Investing in People is one of our Core Values, we strive to attract & retain great people! As such, JELD-WEN offers competitive compensation & benefits packages. Employees (and their families) are covered by medical, dental, vision, and basic life insurance. Employees will accrue up to 15 days' vacation leave annually and receive ten paid holidays throughout the calendar year. Employees can also enroll in the following company benefit programs including, 401k Retirement Savings Plan, Prescription Drug Plan, Flexible Spending Account (FSA), Health Reimbursement Account (HRA), Employee Assistance Program (EAP), Tuition Reimbursement, and Employee Discount Program. Expected pay for this role is between $21.01 to $32.63 per hour and is based on experience and qualifications. JELD-WEN is an equal employment opportunity employer and does not tolerate discrimination, harassment, and/or retaliation based on individuals' physical traits, beliefs, and/or other characteristics that are protected under applicable laws. JELD-WEN does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services.

Job DescriptionSalary: Are you a proven leader in manufacturing who thrives in a fast-paced, hands-on environment? Do you have the expertise to guide skilled CNC operators while driving safety, efficiency, and precision at every turn? If so, we want you on our team. At MQU, were seeking an experienced Production Manager to take ownership of manufacturing operations at our Post Falls facility. In this critical role, youll oversee a talented team of CNC Operators across multiple shifts, ensuring we consistently deliver high-quality products on time while maintaining our uncompromising standards of safety and efficiency. What Youll Do Lead and develop CNC Operators on 1st and 2nd shifts, ensuring performance goals, cross-training, and growth. Lead and develop CNC Operators on 1stand 2ndshifts, driving performance excellence, cross-training opportunities, and professional growth. Provide hands-on support with troubleshooting and day-to-day floor management. Anticipate bottlenecks before they occur, implementing solutions that keep production running smoothly. Partner with Engineering, Production Planning, and Customer Service to align schedules, support new product launches, and deliver on customer commitments. Oversee production metrics OEE, scrap, transactions, and time reportingensuring accuracy and driving continuous improvement. Champion efficiency improvements, root cause problem solving, and adherence to quality standards (ISO-9001 / AS9100). What Were Looking For 10+ years in manufacturing (CNC machining strongly preferred). 5+ years in a supervisory or management role. Expertise with GD&T, CNC programming, and precision machining practices. Experience with multi-axis, mill-turn, and swiss machines. Knowledge of ISO-9001 or AS9100 compliance. A proactive, hands-on leader who thrives in a 24/7 operation. Why Join Us? At MQU, youll step into a role where your leadership makes a direct impact every day. Youll have the opportunity to shape a high-performing team, drive continuous improvement, and grow with a company that values precision, innovation, and people. Compensation: Competitive annual salary (TBD), plus full MQU salaried employee benefits. Schedule: Core hours 6:30am3:30pm, ~4550 hours per week, with availability for after-hours/weekend needs. If youre ready to lead from the front and make a difference in a dynamic, growing manufacturing environment, wed love to hear from you. For ITAR compliance, all employees at this location must be a US citizen or a lawful permanent resident.

Since 2005, Shabby Fabrics has been spreading joy and creativity around the world! We're a global leader in the quilting industry, loved for our innovative designs, original artwork, and top-notch quality. Nestled in beautiful Post Falls, Idaho, our mission is simple: inspire creativity and brighten lives. We're a team that values positivity, teamwork, and a drama-free workplace (yes, really!). Every person here is valued, and we work hard to make Shabby Fabrics a place people love to come to every day. Why You'll Love This Role As our Visual Production Manager, you will be the creative force shaping how customers experience Shabby Fabrics online. From eye-catching product displays to inspiring photography and engaging video content, you will bring our brand to life in ways that excite, delight, and keep customers coming back. This is a highly collaborative, hands-on role where your creativity, leadership, and technical expertise will directly influence customer engagement and sales. If you love blending artistry with strategy-and thrive in a fast-paced, creative environment-this role is an opportunity to truly shine. What You'll Do Manage and provide leadership to our existing visual team, ensuring alignment, collaboration, and high-quality output across all creative projects. Offer direction, feedback, and mentorship to support the growth and success of visual team members. Design and execute visual merchandising strategies that enhance product presentation and elevate the online shopping experience. Produce compelling photography, including lighting, propping, composition, and professional post-processing. Create engaging video content, promotional materials, and social media graphics that align with brand standards. Develop polished, finished graphics for use across digital platforms, marketing campaigns, and product pages. Maintain fresh, cohesive, and on-brand content across our website and social channels. Partner with the marketing team to concept and deliver creative campaigns. Apply SEO best practices to product listings, imagery, and content to boost visibility and conversion. Track and analyze performance metrics to refine visual strategy and maximize customer engagement. What We're Looking For Proven experience in visual merchandising, content creation, photography, or a related e-commerce creative role. Fluency in Adobe Creative Cloud-especially InDesign, Illustrator, Photoshop, and Lightroom. Advanced photography skills, including lighting, staging, and professional-level image editing. Proficiency in color correction, color replacement, retouching, and preparing finished graphics for production. Strong ability to create compelling social media graphics and digital marketing assets. Familiarity with video editing software and digital content creation tools. Experience with WordPress or similar content management systems (preferred). Excellent communication skills, a keen eye for detail, and a strong sense of design and visual storytelling. Exceptional leadership skills, including experience managing, coaching, or developing creative team members. Schedule Monday-Friday: 8:00 AM - 4:00 PM Compensation and Benefits We offer a competitive salary along with a comprehensive benefits package, including: Health, dental, and vision insurance. Paid time off (PTO) and paid holidays. A 401(k) plan with a generous company match. Employee discounts on our amazing products. Paid breaks to recharge during your workday.

The Production Supervisor at Zak Designs oversees and supports the Production department by assigning personnel, setting priorities, and making sure the product is available to meet the requirements. This position trains employees and performs second-line quality assurance procedures. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned as necessary. Closes work orders “back flush.” Product Requests from the warehouse Obtains price tags/labels as required Assigns priorities to work orders and bin transfers Assign employees to workstations and specific jobs to employees Assists in developing and implementing training programs Performs in-process quality control inspections Coordinates with Warehouse, Operations Support, and Quality Assurance personnel Responsible for the cleanliness of production, the bubble wrap rooms, and product staging bins Ensures compliance with Zak Designs policies, including safety and security Completes required entries on pick slips and work orders. Inspects and operates physical equipment and reports defects Maintains tracking log of on-site outside agency temporary employee attendance spreadsheet. SUPERVISORY RESPONSIBILITIES: Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring, training employees, planning, assigning, and directing work; appraising performance, rewarding and disciplining employees; addressing complaints and resolving problems. Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: Associate's degree (A. A.) or equivalent from a two-year college or technical school and at least one year related experience and/or training; or equivalent combination of education and experience. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports, correspondence, and procedure manuals. Ability to speak effectively before groups of customers or employees of the company. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute discounts, interest, commissions, percentages, area, circumference, and volume. Reasoning Ability: Ability to apply commonsense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Other Skills and Abilities: Must be able to tactfully deal with various personalities throughout the company and deal effectively and professionally with internal and external customers. Must be proficient in utilizing computer programs for processing data and writing reports. Required program applications include: Microsoft Outlook (intermediate level), Microsoft Excel (intermediate level), Microsoft Word (intermediate level), Apprise. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to sit; use hands to finger, handle or feel objects, tools, or controls; reach with hands or arms; talk and hear. The employee must regularly lift and/or move up to 5 pounds, occasionally lift and/or move up to 25 pounds and in rare occasions lift up to 40 pounds. Specific vision abilities required by this job require close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate to loud and employee will regularly work near moving mechanical parts. EOE, including disability/vets Salary Description $22.25-25.00 per hour DOE

At Parker Aerospace, we develop technologies and innovative solutions that enable reliable, efficient and increasingly sustainable flight for the lifecycle of the aircraft, including aftermarket support. Our passionate people with deep engineering expertise, together with our breadth of differentiated technologies, ensure that we make the extraordinary happen and continue to shape the future of aviation in partnership with our customers. As a member of our team, you are instrumental in fulfilling our mission: 'Enabling Engineering Breakthroughs that Lead to a Better Tomorrow.' Pursuing a career at Parker presents unlimited opportunities for both professional and personal development. Working with some of the most brilliant minds in the industry, your contributions will be pivotal in developing innovative technologies and products, significantly contributing to Parker's goal of addressing the world's most pressing engineering challenges. At Parker, our team members belong, matter and make a difference. At Exotic Metals Forming Division, our highly talented team blends a passion for manufacturing with relentless customer support, making us the partner of choice for complex aerospace solutions. Working at EMFD is about being part of a team, a culture, something that is bigger than each of us individually. We began as a small group of people passionately committed to a common goal. That is why we are so proud of everyone in our Exotic family who strives to be the best at what they do every day, working as a collaborative team in a culture of continuous improvement to stretch the bounds of creative thinking and provide quality products to our customers around the globe. Production Supervisor The Production Supervisor coordinates and controls production activities to achieve cost and quality targets and production schedules. Closely monitors day-to-day specific line production. * Ensure production goals are met. * Assign work to employees. * Supports new product development. * Understands monthly cost reports. * Maintain and improve 5S scores. * Ensure staff follows company's quality requirements. Complete NC's in a timely and accurate manner. * Implement training plans as driven by standard company plan or superior. * Conduct effective daily crew meetings. * Follow established company policy and flow down to staff. Support management initiatives. * Utilizes Exotic's EDGE in teaching process disciplines to staff. * Ensure working environment is safe for employees. * Perform weekend OT coverage on a rotating schedule. * Perform administrative tasks effectively (i.e. timecards, PTO requests, purchase requisitions, etc.). * Create and foster open communication which encourages new ideas and innovation. * High level of emotional intelligence. * Work well with all levels of the organization. * Display sound judgment. * Understand importance of process discipline. * Proficient in MS Office applications (Word, Excel). Qualifications * Bachelor's degree in business or industrial, Manufacturing, Mechanical or Materials Process Engineering * Requires solid understanding and experience with concepts associated with Kaizen and Lean principles. * Must have ability to assess the overall health of a department or value stream through the correlation of data and direct observation. Ability to identify and implement systemically effective improvement plans based on this analysis. * Must demonstrate a creative approach to problem solving. Must possess capability to see beyond current or historical practice to provide alternate solution. * Has knowledge of multiple leadership approaches and is able to identify and apply the appropriate approach to building individual and team success. * Proficient computer skills. * Must have ability to effectively work with people in a team environment and at various levels of the organization. * Must possess strong verbal, written and interpersonal communication skills. Physical Requirements * Ability to sit, stand and/or walk for 8 hours per day * Ability to occasionally lift up to 25 pounds Pay, Benefits, Work Schedule Competitive Compensation * Pay Range: $72,650 to $121,050 annually * Participation in Annual Incentive Program Benefit & Retirement Plans Parker offers competitive benefit programs, including: * Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. * 401(k) Plan with company matching contributions at 100% of the first 5% of pay. * Company provided defined-contribution retirement plan with annual contribution equal to 3% of pay. * Career development and tuition reimbursement. * Other benefits including paid parental leave, short and long-term disability programs, adoption assistance, a Care.com membership and financial planning assistance are provided at no cost to you. * Supplemental benefit programs including identity protection, legal protection, and pet wellness are available at competitive rates. * Paid Time Off and Company-Paid Holidays. Equal Employment Opportunity Parker is an Equal Opportunity and Affirmative Action Employer. Parker is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency or other appropriate status is required for certain positions, in accord with U.S. import & export regulations. ("Minority / Female / Disability / Veteran / VEVRAA Federal Contractor") If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to Employees & Job Applicants | U.S. Equal Employment Opportunity Commission

The Post-Production Manager oversees the Heat Treat, Processing, Masking, and Paint process and ensures that process adheres to policies and procedures while maintaining Cygnus' quality standards. . Primary Duties and Responsibilities: (This job description is not intended to be all-inclusive. Employee may perform other related duties as may be needed to meet the ongoing needs of the organization.) Develop, implement, communicate, and maintain the company's quality systems, policies, and procedures. Support the policies, goals, and objectives of the company. Review and implement specification changes. Hands on - learn jobs in your area, obtain Cygnus QA endorsement, and assist as needed. Monitor area inventory to be sure staff has supplies to perform their jobs. Standardize work centers. Support bidding with accurate time estimates. Maintain a clean, safe, and organized work environment. Accomplish tasks and directives in a timely and consistent manner. Ensure employees are following policies and procedures while manufacturing quality parts. Motivate and develop department personnel. Ensure procedures are properly understood and carried out. Conduct new hire interviews. Oversee training for new hires. Improve manufacturing processes. Lead the investigation of nonconformances charged to the Post-Production Department. Conduct performance reviews and solve internal issues. Monitor employee attendance, dependability, performance, and training. Exercise fiscal responsibility through making cost effective purchasing decisions Prioritize, plan, coordinate, and schedule department activities and workload to maintain an acceptable level of workflow and support ship dates. Maintain equipment to ensure proper working order. Support the company during audit situations. Confer with higher levels of management. Specialized Skills / Knowledge Ability to read, analyze, and interpret, complex documents and specifications. Must have basic knowledge of manufacturing and painting. This includes knowledge of paint guns etc. Prefer experience with HVLP painting. Must be able to read and understand blueprints and work instructions. Prefer previous management experience. Effective leadership and excellent communication. Typical Benefits Package: This is a full-time position. 9/80 schedule Days: 6am -3:30pm. Mon - Thu, Fri 6am - 2:30pm with every other Friday off. Benefits package available after 3 months: Medical, Dental, Optical, PPTO, 401K. Salary: Depending on Capabilities and Experience About the Company: Cygnus, Inc. is a one-stop manufacturer of high-quality precision aerospace sheet metal and machined parts and assemblies. The Company's success, based on the “Cygnus Code of Ethics”, has resulted in a long-standing reputation of “Manufacturing Excellence” winning numerous “Supplier of the Year” and Excellence Awards over the past 35 years. Cygnus Inc. has a wide variety of manufacturing capabilities including CNC mills, CNC routers, CNC brakes, CNC waterjet, penetrant inspection, heat treat, alodine and anodize processing, painting, and subassemblies. Cygnus has 85 employees in its 44,000 sq. ft. facility located in an ideal quality of life Pacific Northwest resort community with scenic hiking, boating, sailing, fishing, hunting, golfing, skiing, and snowmobiling. Cygnus, Inc. is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. Cygnus strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons because of race, color, sex (including pregnancy), age, national origin or ancestry, ethnicity, religion, creed, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, training, promotion, discipline, compensation, benefits, and termination of employment. Cygnus complies with the Americans with Disabilities Act (ADA), as amended by the ADA Amendments Act, and all applicable state or local law. Cygnus, Inc participates in E-verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Jubilant HollisterStier LLC, Spokane's Largest Manufacturing Company, and well-established member of the business community, provides a complete range of services to support the pharmaceutical and biopharmaceutical industries. Jubilant HollisterStier is a nationally recognized contract manufacturer of sterile injectable vials, and lyophilized products. The Allergy business is a worldwide leader in the manufacture of allergenic extracts, targeted primarily at treating allergies and asthma. Jubilant HollisterStier is a proud member of the Jubilant Pharma family. Our Promise: Caring, Sharing, Growing We will, with the utmost care for the environment and society, continue to enhance value for our customers and stakeholders by providing innovative products and economically efficient solutions' through growth, cost effectiveness and wise investment of resources. Job Description: The Manufacturing Lead, will have functional responsibility of Aseptic Manufacturing Operations for Line 1 & Line 2 (Preparation, Filtration, Filling, and Lyophilization). Reporting directly to the Manager, Manufacturing, to provide operational support, and maintain a strong working knowledge of the manufacturing processes and equipment within Manufacturing. * Provide subject matter expertise on Manufacturing processing source materials, equipment and component preparation and sterilization, aseptic filtration, aseptic filling, and lyophilization. Report operational status to the next level of management, and with all affected peers on a daily basis. * Provide CGMP, job task, and safety training for personnel in the manufacturing areas. * Order production supplies and equipment required to manufacture product. * Interact with all supporting departments (ex: Quality Assurance, Maintenance, PIC, etc.) to ensure production line problems are dealt with promptly and with appropriate quality considerations. * Schedule the validation of processes and equipment. * Provide subject matter expertise on hourly employee performance, including compliance with SOP's, cGMP's, and safety regulations to the Manager, Manufacturing. * Work with cross functional teams to review, author and revise standard operating procedures and batch records, assist with conducting deviation investigations, and write deviation reports. * Document and communicate all aspects of work and leanings, providing training and mentorship for new personnel. * Ensure that all environmental monitoring limits are maintained in all areas. * Support and participate in internal and external regulatory inspections as necessary. Qualifications: * Bachelors in a related science field or 2-3 years of relevant experience in lieu of degree required * 2-3 years of relevant experience in an FDA-regulated company required. * Pharmaceutical experience preferred * Production planning desired * Experience in aseptic fill/finish manufacturing desired * Microsoft Word & Excel and Microsoft PowerPoint experience required * Interpretation of cGMP Regulations experience required * Strong attention to detail and organizational skills required * Respirator Clearance required * Work in Aseptic areas required * Prolonged sitting and standing required Shift: Weekend days, Friday-Sunday E/O Thursday 6am-6pm Compensation & Benefits: This is an on-site, full-time position located in Spokane, WA. * Hiring Wage: $39.56 - $53.53 hr. depending on experience, with opportunity for growth, promotion and annual raises. Midpoint and above is reserved for employees who have longevity with Jubilant HollisterStier and consistently exhibit outstanding performance over a period of time in the role * Shift Differential pay is available for this position, and is determined by hours worked on selected shift. Weekend Day Shift 12HRS 12% * Medical, Dental, Vision, Flexible Spending and Health Savings Accounts * Life, AD&D, Short and Long Term Disability * 401(k) with company match * Generous paid time off plan * Employee Assistance Program Unlock your potential with Jubilant HollisterStier! If you're seeking a dynamic and rewarding career, we welcome your application today! ******************************** * Please click on the Spokane, Wa. Link* Jubilant HollisterStier is an EEO/AA Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you require assistance applying for a position, please contact our HR Department at: ******************************

Hourly Wage: **$24.5 - $37.5 per/hour** *The actual hourly rate will equal or exceed the required minimum wage applicable to the job location. Additional compensation includes annual or quarterly performance incentives. Additional compensation in the form of premiums may be paid in amounts ranging from $0.35 per hour to $3.00 per hour in specific circumstances. Premiums may be based on schedule, facility, season, or specific work performed. Multiple premiums may apply if applicable criteria are met. Employment Type: **Full-Time** Available shifts: **Mid-Shift, Closing** Location **Walmart Supercenter #2549** 9212 N COLTON ST, SPOKANE, WA, 99218, US Job Overview Pharmacy associates focus on the needs of our customers as they entrust us with their prescriptions and health needs. They are responsible for inputting and processing prescriptions, supporting patients with product information, and providing customer service in our store pharmacies. Benefits & perks At Walmart, we offer competitive pay as well as performance-based incentive awards and other great benefits for a happier mind, body, and wallet. Health benefits include medical, vision and dental coverage. Financial benefits include 401(k), stock purchase and company-paid life insurance. Paid time off benefits include parental leave, family care leave, bereavement, jury duty, and voting. Other benefits include short-term and long-term disability, company discounts, Military Leave Pay, adoption and surrogacy expense reimbursement, and more. You will also receive PTO and/or PPTO that can be used for vacation, sick leave, holidays, or other purposes. The amount you receive depends on your job classification and length of employment. It will meet or exceed the requirements of paid sick leave laws, where applicable. For information about PTO, see Smart Guide page (*********************************************************************** Live Better U is a Walmart-paid education benefit program for full-time and part-time associates in Walmart and Sam's Club facilities. Programs range from high school completion to bachelor's degrees, including English Language Learning and short-form certificates. Tuition, books, and fees are completely paid for by Walmart. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to a specific plan or program terms. For information about benefits and eligibility, see One.Walmart.com. Walmart is committed to maintaining a drug-free workplace and has a no tolerance policy regarding the use of illegal drugs and alcohol on the job. This policy applies to all employees and aims to create a safe and productive work environment. Walmart, Inc. is an Equal Opportunity Employer- By Choice. We believe we are best equipped to help our associates, customers, and the communities we serve live better when we really know them. That means understanding, respecting, and valuing diversity- unique styles, experiences, identities, abilities, ideas and opinions- while being inclusive of all people.

Job DescriptionDescription: Job Title: Lead Detailer Reports To: Chad Shoquist About Us O'Donnell Metal Deck LLC is a national distributor with six locations across the country, specializing in construction materials. We're growing rapidly and evolving our internal operations to match. As we continue to scale, we're looking for smart, proactive people who thrive in process-driven environments and want to make a real impact. Position Summary At O'Donnell Metal Deck, we're building the future of construction-one project at a time. We're looking for a detail-oriented Drafter to turn complex contract documents into clear, precise, and accurate steel joist and deck layout plans. In this role, you'll prepare layouts, sections, and bills of material that meet customer specifications, align with industry standards, and reflect our company's commitment to quality and excellence. The lead detailer position is intended as an opportunity for the candidate to build fluency in our product & process with the expectation that they will develop the competencies required to assume the role of Detailing Manager. If you have an eye for accuracy, a passion for problem-solving, and want to be part of a team that values precision and craftsmanship, this is the role for you. Key Responsibilities Review and interpret contract drawings, specifications, and change orders to ensure accuracy and completeness of data. Prepare clear, detailed layout drawings for customer review and written approval. Generate accurate bills of materials (BOMs) based on layout drawings, including all loading and design requirements. Verify the accuracy and completeness of drawings and BOMs prepared by self and peers. Issue final field-use construction documents for customer use. Coordinate with steel erection drawings to ensure alignment and constructability. Maintain organized and accessible job files within the company's digital filing system for cross-departmental use. Notify Project Management of scope changes due to revised drawings or customer requests, and update records accordingly. Collaborate with document originators and stakeholders to resolve discrepancies and update submittals. Provide responsive customer support during the erection process by addressing technical questions. Utilize AutoCAD/Tekla or similar software to prepare and update drawings. Utilize Tekla Structures software to create BIM upon request. Partner with Project Management/peers to provide technical guidance and training as necessary. Partner with Project Management/peers to help develop RFI's as necessary. Partner effectively with customers, coworkers, and supervisors by maintaining clear, professional communication. Demonstrate professionalism through regular, reliable attendance and a commitment to company values. Perform other related duties as assigned. Why Join Us? Competitive salary and performance-based bonus Full benefits: health, dental, vision 401(k) with company match Career growth opportunities within a growing national business Supportive, team-oriented culture Requirements: Qualifications Associate degree in Drafting, CAD Technology, or a related field; equivalent work experience may substitute for formal education. 1+ years of AutoCAD experience required; experience with Revit or Bluebeam is a plus. Proficiency with Microsoft Office Suite (Word, Excel, Outlook, Teams). Ability to read, analyze, and interpret structural drawings, specifications, and technical documents. Familiarity with steel designations on structural drawings strongly preferred. Demonstrated ability to detail complex projects with minimal supervision. Strong attention to detail and capability to serve as a project “checker,” reviewing drawings and materials for accuracy and completeness. Excellent written and verbal communication skills, with the ability to collaborate effectively with internal teams and external customers.

Job Description Our client - a global and growing BioPharma CDMO company needs an Engineering Line Lead with Pharmaceutical Industry experience at their expanding plant in WA state, Excellent total comp. up to $180K+ with excellent Benefits + Relocation Bonus. Job Posting # 2703 Job Title: Engineering Line Lead Overnight Travel: 10% Location: Spokane, WA Relocation: YES - The client offers a lumpsum bonus for relo assistance. Compensation: Salary range $120K - $165K+ Annual Bonus (10 %) Full Benefits: Medical, Vision, Dental, 15 days' vacation/Sick time, 10 - Holidays, 401k (match up to 4%). Company Info: Our client is a growing CDMO company in the Pharmaceutical Industry. They are a part of a global parent company with sites in many countries with around 1,300 people at this site in Spokane, WA. This is an integrated contract development and manufacturing organization (CDMO) offering specialized Aseptic Sterile manufacturing, filling and lyophilization of drug products in Vials. Group Info: Be part of the Plant Engineering group of around 60 technical people. This role will be responsible for the technical aspects of 1 of the 4 lines This role will report to the Engineering Manager. Note 1: The company recently completed their 3rd state-of-the-art Sterile Liquid compounding & Vial Filling line and are currently expanding again with a 4th line at this growing plant site. Note 2: The primary focus will be the technical and project engineering aspects of 1 complete filling line Note 3: Client will support transfer of existing H1B Visa for this permanent direct hire role, but will not sponsor for a new H1B visa. Job Summary: The Engineering Line Lead position provides leadership, manufacturing support and coordination of the engineering department for the CMO line specific projects. This position ensures that contract projects, equipment functionality, compliance support, and capital expenditures are executed per Company management initiatives, compliance guidelines, the project management system, and the capital budget schedule. It is the responsibility of this position to ensure line specific compliance of the CMO equipment and team with state, local, and federal regulations. This position ensures operations and projects are carried out under adherence to GEPs and cGMPs. Job Functions and applications in cGMP settings. Provide technical oversight and leadership to the engineering team roles responsible for their area of responsibility within the CMO Business Unit. Drive technical improvements and internal/external responses to equipment and facility observations. Management of the assigned capital project schedules and budgets. Assign and oversee engineering projects including internal capital, compliance, and contract manufacturing. Coordinate and supervise engineering resources to ensure adequate and appropriate staffing for current and upcoming projects. Ensure designated area, equipment and engineering infrastructures are compliant to local, state, federal, and international regulatory agencies. Execute high level projects from conception, consistent with upper management objectives for business growth. Manage and execute facility and equipment updates to meet company growth and economic objectives. Support client audits and technical visits. Effectively communicate project status, constraints and current or potential issues to upper management. Candidate Must Have: Bachelors of Science in Engineering or related technical degree. 5+ years of Engineering Experience 3+ years of Engineering experience in the BioPharma industry 2+ years of Project Engineering/Management experience Facility or Manufacturing Engineering Experience MS Office suite (Word, PowerPoint, Excel) experience Candidate Nice to Have: BS in Mechanical, Chemical, Electrical, Manufacturing engineering Advanced degree or PE or PMP certification Some Leadership, Supervisory experience over Jr. Engineers, Technicians. Experience with PM Software - MS Project, Design software - AutoCAD & ERP - SAP Experience with Pharma sterile aseptic manufacturing, filling, Lyophilization Interfacing with OEM equipment vendors, Construction/consulting partners Keywords: Projects, Plant Project, engineering, Pharma, CDMO, manufacturing, plant, FDA, GMP, Sterile Aseptic liquid filling, Isolators, Clean rooms, Lyophilization, contract Manufacturing, Supervisor, Lead

* Responsible for all aspects of the donor center in the absence of the Assistant Manager and/or Director of Center Operations * Ensures compliance with all federal, state, local, and company-specific rules, regulations, and practices related to the quality and safety of products, donors, and employee * Provide clear instructions, conduct meetings, and communicate performance expectations * Participate with management in conducting performance appraisals, providing performance feedback. With management review, document verbal and written coaching level corrective actions as needed. Assist in maintaining up-to-date employee training files, checklists, and assist with performance evaluations and certification status * Develop and implement active donor recruitment advertising campaigns to improve production levels * Manage and develop talent within the donor center. Participates in the selection process of new staff for the donor center * Work collaboratively with staff, peers, and management to achieve business goals. Communicate continuously and resolves conflicts proactively * Learn and maintain thorough familiarity and compliance with all state and federal regulations, Standard Operating Procedure Manual, Occupational Safety and Health Administration (OSHA), Clinical Laboratory Improvement Amendments (CLIA), Current Good Manufacturing Practice (cGMP), and internal Company Procedures * Thorough knowledge of applicable Company and departmental policies, and regulated procedures as well as the willingness to learn and follow any policy or procedure that may be introduced in the future * Maintain a positive and professional demeanor during all interactions with donors, fellow employees, and vendors * Regular attendance and arriving on time to all scheduled shifts and mandatory meetings * Maintain confidentiality of personnel, donor, and center information * Actively participates in root cause analysis, deviation management, and process improvement. * Performs donor counseling and reports to local and state agencies as applicable. * Initiate and assist in donor investigations regarding Post Donation Information * Assist with the annual re-certification process for non-trainers * Will be cross-trained in all technical areas and other functions to meet the needs of the business. * Other duties as assigned Position Qualifications * High school diploma or equivalent required * Minimum of two (2) years of relevant work experience including one (1) year experience in a supervisory position, preferably in a regulated industry or; * Associate's Degree in Science or Business Management * Strong verbal and written communication skills * Must have above average problem-solving and decision-making abilities * Proficiency with computers * Must have explicit attention to detail * Must have excellent analytical skills, organization skills, and follow-up * Ability to read and interpret documents such as safety rules, operating and maintenance instruction, and procedure and technical manuals * Ability to interpret a wide variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables * Use hands to handle or feel objects, tools, or controls; reach with hands and arms; and talk or hear * Frequent leaning, bending, stooping, crouching, and reaching above the shoulders and below the knee * Manual dexterity to perform all phases of donor plasmapheresis * Ability to make and analyze a physical assessment of heart, lung sounds, signs of drug use, etc * Ability to stand for extended periods of time for up to four (4) hours at a time * Ability to lift, tug, pull up to fifty (50) pounds * Typical work environment with moderate notice level * May be exposed to freezing temperatures for short periods of time * Occupational exposure to Bloodborne pathogens

We hope you're interested in building a home with us. Even if you don't feel that you meet every requirement listed in this job description, we still encourage you to apply. About the Team Our mission is to enhance the quality of our customers' lives at home. We put the customer at the center of everything we do, every day. Our corporate values that guide our actions and decisions are our People First culture, customers, quality, shareholders, integrity, and corporate responsibility. Overview of the Lead, Visual role You will provide daily support to the management team by performing opening and closing routines, providing supervision to ensure store is meeting financial goals and associates are providing World-Class service to our guest. You will perform operational functions in the assigned area of accountability Sales to ensure the store meets company expectations. Responsibilities · Effectively perform operational functions: open and close the store, register functions and back office procedures · Ensure store meets visual, replenishment, cleanliness, safety and back of house standards during manager- on-duty shifts · Effectively perform the Selling Captain role, serving as a role model for sales associates in sales generation and customer service by making the customer experience the priority · Utilize Selling Essentials and training resources to educate team on product, improve selling skills, and achieve business goals · Provide training and coaching expertise to associates in selling, product knowledge, clienteling and in- home services · Maintain an environment where all associates are treated fairly and with dignity and respect, in accordance with our People First Philosophy Criteria · Effective communication, organization and leadership skills · Proven ability to motivate and influence others through personal actions and examples. · Ability to be active, standing, walking, bending, climbing, reaching and lifting for extended periods of time, required throughout the workday · 1-3 years retail sales experience with shift supervision experience preferred · 1-2 years experience in home related design, visual merchandising, or stockroom responsibilities preferred (specialty retail preferred, but not required). Physical Requirements · Must be able to be mobile on the sales floor for extended periods of time · Must be able to lift and mobilize medium to large items, up to 75 lbs., while utilizing appropriate equipment and safety techniques · Full time associates are expected to have open availability to meet the needs of the business. · Part-Time Flex associates must be available to work a minimum of two regularly scheduled shifts on the weekend** (Friday, Saturday and/or Sunday) and two during the week (Monday to Thursday). For an associate to be scheduled 20 hours or more weekly, greater availability (beyond the minimum required above) that meets the needs of the business will be required. **Weekend availability cannot fall on the same day; an associate must be available on two separate days (Friday and Saturday, Friday and Sunday or Saturday and Sunday). Our Mission Around Diversity, Equity & Inclusion We firmly believe that working in a culture focused on diversity, equity, and inclusion spurs innovation, creates healthy and high-performing teams, and delivers superior customer experiences. We will create and nurture a global company culture where we confidently bring our authentic selves to work every day: where the only criteria for advancement are the quality of our work, the contributions we make to our teams and the business, and our ability to lead; and where our individual differences-whatever they may be-are valued, explored and appreciated. Benefits Just for You This role offers a competitive compensation package including pay and benefits. Pay is based on several factors including but not limited to education, work experience, certifications, geographic location etc. The anticipated pay range for this role will be: $17.28-$21.00 per hour. Depending on your position and your location, here are a few highlights of what you might be eligible for: · A generous discount on all Williams-Sonoma, Inc. brands · A 401(k) plan and other investment opportunities · A wellness program that supports your physical, financial and emotional health · Paid vacations and holidays (full-time) · Health benefits, dental and vision insurance, including same-sex domestic partner benefits (full-time) Your Journey in Continued Learning · Individual development plans and career pathing conversations · Annual performance appraisals · Cross-brand and cross-functional career opportunities · Online learning opportunities through brand specific resources and WSI University · Leadership development opportunities WSI will not now or in the future commence an immigration case or "sponsor" an individual for this position (for example, H-1B or other employment-based immigration This role is not eligible for relocation assistance. Williams-Sonoma, Inc. is an Equal Opportunity Employer. San Francisco Locations: Williams-Sonoma, Inc. is an Equal Opportunity Employer. Williams-Sonoma, Inc. will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the San Francisco Fair Chance Ordinance, or other applicable state or local laws and ordinances.

If you are an internal applicant, please log into Workday and submit your application via the Jobs Hub. Please click here to apply internally. Discovery Land Company creates one-of-a-kind environments that provide individuals and families the freedom, security, and resources to learn, grow, and play in some of the most beautiful places in the world. Through these environments, Clubs foster relationships, share unforgettable and life-changing experiences, embrace well-being, and inspire pure expressions of love, joy, compassion, and gratitude. At Gozzer Ranch we believe that meeting the mission stated above is a promise we get to deliver on every day. Gozzer Ranch Employees use their personal talent, passion, and resources to meaningfully integrate with diverse cultures and communities to create a viable and fun world for future generations, we do this by operating from our company's unwavering values, learning, growing, and adjusting as we go. As the Marina Supervisor for Gozzer Ranch and Discovery Marina, you will be part of creating the Gozzer Ranch Experience. The Marina Supervisor oversees the daily operations of Discovery Marina, which encompasses the Docks, valet operation, Boat Captains, Beach, Marina Office, and the Fleet of Boats. Their responsibilities include recruitment, staffing, training, maintaining cleanliness, organizing the Marina, and ensuring a welcoming atmosphere for members and their guests. You may be asked to perform other tasks (outside of your key areas of responsibility) from time to time based on business needs. While performing all tasks at Gozzer Ranch we require passion and behavior that embodies our company values: PEOPLE ARE OUR PRIORITY WE RESPECT PEOPLE, PLACES, AND CULTURES WE DO THE RIGHT THING WE BELIEVE IN HAVING FUN Your key areas of responsibility are outlined below: Key Area #1: Valet Operations and Team Overseeing the day-to-day operations of the boat valet service, ensuring efficient and timely service delivery. Managing a team of Dockhands, including hiring, training, scheduling, and performance management. Write a staff schedule within your budget and the appropriate daily coverage for all areas. Coordinating the parking, launching, and retrieval of boats, ensuring proper handling and care. Daily boat maintenance for member boats, including uncovering and covering, stocking basic supplies, and wiping down and cleaning. Provide fueling, pump-outs, details, and drop-offs when requested. Maintaining accurate records of boat inventory, including boat details, owner information, and storage locations. Delegating private boat drivers who are qualified for that specific vessel without causing low staffing for valet operations. Implementing and enforcing safety protocols and procedures to ensure the well-being of staff and the protection of boats. Collaborating with boat owners to understand their specific needs and preferences, providing personalized service. Monitoring and maintaining cleanliness and organization in the valet area, ensuring a professional and welcoming environment. Conducting regular inspections of boats for any damage or maintenance needs, reporting and coordinating repairs as necessary. Developing and implementing training programs for boat valets, ensuring they are equipped with the necessary skills and knowledge. Resolving customer complaints or concerns in a professional and timely manner, striving to provide excellent customer service. Maintaining positive relationships with boat owners and marina tenants, addressing their needs, and fostering a positive customer experience. Assists other Outdoor Pursuits staff in planning and implementing Club Events when Marina services are required. Understanding member and member guest needs. Provide them with personalized solutions by suggesting activities and facilities provided by the Club. Create a clean, safe, welcoming atmosphere. Daily stocking of towels, sunscreen, water, ice, and any other amenities. Keep daily records of usage of the Marina and report needed charges to the Outdoor Pursuits office daily. Key Area #2: Member Boat Service Scheduling routine maintenance tasks such as oil changes, filter replacements, and lubrication to ensure the proper functioning of boat engines and systems when requested. Diagnosing and troubleshooting boat engine and system problems and providing appropriate repairs or recommendations for further action. Scheduling member boats if in need of repairing or replacing damaged or malfunctioning boat components, including engines, propellers, steering systems, electrical systems, and ballast systems. Conducting boat winterization and de-winterization procedures to protect boats during the offseason. Assisting boat owners with boat customization or upgrades, based on their specific requirements and preferences through local 3rd party vendors. Providing boat cleaning and detailing services, including hull cleaning, polishing, and interior cleaning. Conducting boat safety inspections to ensure compliance with relevant regulations and standards. Responsible for the accurate purchasing and billing of hard and soft goods, boating supplies, tubes, and other boat-related items when requested. Schedule launching and retrieving their boats from the water. Maintaining accurate records of services provided, including work orders, parts used, and customer interactions. Providing excellent customer service by addressing customer inquiries, and concerns, and providing recommendations for boat maintenance and care. Collaborating with other boat service providers or suppliers to source parts, tools, or expertise when needed. Key Area #3: Discovery Marina Shuttle Boats and Captains Provide fleet boats with backup assistance when boats are at max occupancy, out of service, fueling, or on hold due to weather or other unlisted circumstances. Work with the OP office and Marketing to coordinate the scheduling of cruises, and transportation of D-1 and other boats as needed. Ensure all fleet boats are operating on schedule. Key Area #4: OP Office and Marina Office Work with the OP Office on all scheduling, charging, tracking, and forecasting of OP Activities at the Marina Structure the Marina Office to be a complimentary service to the membership and improve communication with the line staff. Capture all revenue and create added revenue sources through additional programming and services at the Marina. Key Area #5: Beach and OP Recreation Seasonal set-up, breakdown, and storage of all beach equipment. Write a staff schedule within your budget and the appropriate daily coverage for all areas. Ensure all staff are family-friendly and engaging for the area. Create a clean, safe, welcoming atmosphere. Daily stocking of towels, sunscreen, water, ice, and any other amenities. Develop programs and encourage the membership to get involved in OP activities. Key Area #6: Member Experience and Vibe Uphold the Club's policies and procedures both personally and with your staff. Ensure that each member and member guest receive outstanding service in a friendly environment. This includes promptly and professionally greeting and acknowledging every member and member guest, maintaining outstanding service standards, and possessing solid product knowledge. Communicate with members to create an honest relationship where their service needs, food and beverage selections, and other dining-related services are known to you and your team. Exceed member and member guest expectations. Create 100% guest satisfaction by providing our Gozzer brand behavior and genuine hospitality. Give personal attention and take personal responsibility for the member and guest experience. Promoting services and activities provided to Gozzer Ranch members. Understanding member and member guest needs. Provide them with personalized solutions by suggesting activities and facilities provided by the Club. Assisting in creating the service vibe with your team through service-minded experiences. Key Area #7: Teamwork Work intentionally to include all co-workers and peers. Support Club wide services and events when possible. Create good working relationships with ALL Gozzer Employees. Maintain a courteous attitude toward ALL Gozzer Employees. Key Area #8: Recruiting and Training Work with Human Resources and the marina manager to organize and create a recruitment plan that accurately identifies needs. Participate in activities to increase overall applicants to Gozzer Ranch. Plan and implement safety procedures, making sure the staff is certified with basic skills and has the necessary resources available (CPR, first aid, USCG certification, and background checks). Ordering uniforms and ensuring the staff is dressed appropriately each day for the specific areas. Developing and implementing training programs for marina staff, including new hires and ongoing professional development. Assessing training needs and identifying areas for improvement in knowledge, skills, and performance. Creating training materials, including manuals, presentations, and online resources, to support the training programs. Keeping open lines of communication with staff to gather feedback, address concerns, and ensure training programs meet their needs. Knowledge, Skill, and Abilities: Prior marina management experience preferred. Must have strong overall knowledge of boats. Must have knowledge and adherence to all state laws pertaining to the sale and service of liquor and other alcoholic beverages. Comply with Idaho State Health and Wellness regulations. Possess good computer knowledge. Ability to work effectively with all personality types. Ability to understand and carry out verbal and written instructions independently. Ability to perform mathematical calculations correctly. Ability to work weekends, holidays, mornings, and nights. Ability to work in all weather conditions and temperatures including inside and outside areas. Ability to perform light physical tasks, exerting up to 25 lbs. of force on a frequent basis and up to 75 lbs. on an occasional basis independently or with help. Ability to perform such activities as grasping, lifting, reaching, crouching, walking, sitting, and carrying. About Discovery Land Company: Founded in 1994 by Michael S. Meldman, Discovery Land Company specializes in building luxury residential private club communities and resorts throughout North America. We have grown to be the premier player in the high-end resort residential niche with 20 world-class projects in our portfolio. Our communities are distinct with their architectural styles, world-class amenities, and high levels of service. We don't build buildings, but rather we build settings where families can create intergenerational memories and enrich their lives in exquisite and untouched sanctuaries. These settings offer a casual and comfortable sense of community through outstanding clubhouses, premier golf courses, welcoming staff, world-class culinary offerings, and outdoor pursuits. To ease and enrich your experiences, Discovery holds itself to the highest of service standards. Every decision we make is driven by one fundamental objective: to make the time you spend with the people you care about most not merely enjoyable, but memorable. We are extremely grateful to be recognized as one of the world's top mid-sized employers for 2018 by Forbes magazine. For more information about our company - ****************************** About Gozzer Ranch Golf & Lake Club: Gozzer Ranch offers the perfect setting for living life to its fullest amid the grandeur and undisturbed beauty of the great Northwest. Whether you choose to spend these moments teaching your son or daughter to bait a hook, pampering yourself with a spa treatment, enjoying an unforgettable round of golf, or sailing in the summer breeze, these are the kinds of moments that create memories that will be cherished for generations to come - **************************

JELD-WEN is currently seeking a General Production - Days to join our growing team. Who we are * VPI Quality Windows is a commercial division of JELD-WEN, Inc. that focuses on manufacturing windows and patio doors for multi-family construction with a particular focus on apartments, dormitories, senior living, and hotels. Job Overview * The primary role of General Production is to perform tasks with a focus on safety, quality, and productivity. * Level 1 General production starts at $21.01/hr with benefits. What We Do * Prepare vinyl lineals for production using a lamination process * Saw and machine vinyl and metal to prepare for window and door assembly utilizing CNC saws and mills. * Assemble and glaze windows and patio doors through an assembly line process. Principal Job Duties and Responsibilities * Be self-motivated and able to work with minimal supervision. * Process-driven with a focus on continuous improvement. * Assists co-workers in analyzing and correcting problems encountered in job assignments to perform work according to standard work procedures and instructions Position Requirements * This role requires consistent physical activity throughout the shift, including lifting, pushing, pulling, and carrying materials weighing up to 50 lbs independently and up to 100 lbs with team assistance. * Work may involve repetitive motions and working in a fast-paced assembly line manufacturing environment * Employees must be able to stand and walk for up to 12 hours per day on hard surfaces. * Frequent bending, reaching, twisting, and climbing may be required to access materials and operate equipment. * Ability to read and interpret production paperwork and labels * Demonstrated proficiency in using metrology instruments and recording inspection data * Personal Protective Equipment (PPE) must be worn at all times, and employees are expected to maintain a safe and clean work area. * Overtime may be required, sometimes on short notice, to meet production goals. * Must meet daily production rates while maintaining quality standards for raw materials, work-in-progress, and finished goods. * Advancement opportunities are available, with a strong emphasis on promoting from within. * Additional tasks may be assigned by the Supervisor or Manager as needed to support operations. * Candidates must be comfortable working with both manual and powered tools commonly used in manufacturing and assembly environments. These include, but are not limited to: * Mallets * Putty knives * Self-retracting knives * Diagonal cutters * Glazing guns * Drills * Saws * Sanders * Vacuum hoists * Mills * Punches * Routers * Pallet jacks Required Skills and Experience * High School Diploma or Equivalent. * Stable work history with preferred 2 - 3 years of manufacturing experience. Recent graduates are encouraged to apply. * Strong verbal and written communications skills. * Proven problem solving and organizational skills. * Works well in a team environment with a diverse workforce. * Ability to perform several tasks concurrently with ease and professionalism. About JELD-WEN Holding, Inc. JELD-WEN Holding, Inc. (NYSE: JELD) is a leading global designer, manufacturer and distributor of high-performance interior and exterior doors, windows, and related building products serving the new construction and repair and remodeling sectors. Based in Charlotte, North Carolina, the company operates across North America and Europe. Our associates are dedicated to bringing beauty and security to the spaces that touch our lives through our market-leading product brands across the world. The JELD-WEN family of brands includes JELD-WEN worldwide, LaCantina and VPI in North America, and Swedoor and DANA in Europe. For more information, visit corporate.JELD-WEN.com or follow LinkedIn. JELD-WEN has been named by Forbes as one of 'America's Best Employers' and by Newsweek as one of the 'World's Most Trustworthy Companies'. What We Offer Investing in People is one of our Core Values, we strive to attract & retain great people! As such, JELD-WEN offers competitive compensation & benefits packages. Employees (and their families) are covered by medical, dental, vision, and basic life insurance. Employees will accrue up to 15 days' vacation leave annually and receive ten paid holidays throughout the calendar year. Employees can also enroll in the following company benefit programs including, 401k Retirement Savings Plan, Prescription Drug Plan, Flexible Spending Account (FSA), Health Reimbursement Account (HRA), Employee Assistance Program (EAP), Tuition Reimbursement, and Employee Discount Program. Expected pay for this role is between $21.01 to $32.63 per hour and is based on experience and qualifications. JELD-WEN is an equal employment opportunity employer and does not tolerate discrimination, harassment, and/or retaliation based on individuals' physical traits, beliefs, and/or other characteristics that are protected under applicable laws. JELD-WEN does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services...

Are you a proven leader in manufacturing who thrives in a fast-paced, hands-on environment? Do you have the expertise to guide skilled CNC operators while driving safety, efficiency, and precision at every turn? If so, we want you on our team. At MQU, we're seeking an experienced Production Manager to take ownership of manufacturing operations at our Post Falls facility. In this critical role, you'll oversee a talented team of CNC Operators across multiple shifts, ensuring we consistently deliver high-quality products on time while maintaining our uncompromising standards of safety and efficiency. What You'll Do Lead and develop CNC Operators on 1st and 2nd shifts, ensuring performance goals, cross-training, and growth. Lead and develop CNC Operators on 1st and 2nd shifts, driving performance excellence, cross-training opportunities, and professional growth. Provide hands-on support with troubleshooting and day-to-day floor management. Anticipate bottlenecks before they occur, implementing solutions that keep production running smoothly. Partner with Engineering, Production Planning, and Customer Service to align schedules, support new product launches, and deliver on customer commitments. Oversee production metrics-OEE, scrap, transactions, and time reporting-ensuring accuracy and driving continuous improvement. Champion efficiency improvements, root cause problem solving, and adherence to quality standards (ISO-9001 / AS9100). What We're Looking For 10+ years in manufacturing (CNC machining strongly preferred). 5+ years in a supervisory or management role. Expertise with GD&T, CNC programming, and precision machining practices. Experience with multi-axis, mill-turn, and swiss machines. Knowledge of ISO-9001 or AS9100 compliance. A proactive, hands-on leader who thrives in a 24/7 operation. Why Join Us? At MQU, you'll step into a role where your leadership makes a direct impact every day. You'll have the opportunity to shape a high-performing team, drive continuous improvement, and grow with a company that values precision, innovation, and people. Compensation: Competitive annual salary (TBD), plus full MQU salaried employee benefits. Schedule: Core hours 6:30am-3:30pm, ~45-50 hours per week, with availability for after-hours/weekend needs. If you're ready to lead from the front and make a difference in a dynamic, growing manufacturing environment, we'd love to hear from you. For ITAR compliance, all employees at this location must be a US citizen or a lawful permanent resident.

NOTE: THIS ROLE IS BASED 100% ON-SITE IN SPOKANE, WA. RELOCATION ASSISTANCE AVAILABLE! Jubilant HollisterStier LLC, a well-established member of the business community in Spokane, Washington, provides a complete range of services to support the pharmaceutical and biopharmaceutical industries. The Allergy business is a worldwide leader in the manufacture of allergenic extracts, targeted primarily at treating allergies and asthma. Jubilant HollisterStier is also a nationally recognized contract manufacturer of sterile injectable vials, and lyophilized products. Jubilant HollisterStier is a proud member of the Jubilant Pharma family. Our Promise: Caring, Sharing, Growing We will, with the utmost care for the environment and society, continue to enhance value for our customers and stakeholders by providing innovative products and economically efficient solutions' through growth, cost effectiveness and wise investment of resources. Job Description: TheCMO Engineering Line Leadposition provides leadership, manufacturing support and coordination of the engineering department for the CMO line specific projects. This position ensures that contract projects, equipment functionality, compliance support, and capital expenditures are executed per Jubilant HollisterStier management initiatives, compliance guidelines, the JHS project management system, and the capital budget schedule. It is the responsibility of this position to ensure line specific compliance of the CMO equipment and team with state, local, and federal regulations. This position ensures operations and projects are carried out under adherence to GEPs and cGMPs. Responsibilities: * Provide technical oversight and leadership to the engineering team roles responsible for their area of responsibility within the CMO Business Unit. * Drive technical improvements and internal/external responses to equipment and facility observations. * Management of the assigned capital project schedules and budgets. * Assign and oversee engineering projects including internal capital, compliance, and contract manufacturing. * Coordinate and supervise engineering resources to ensure adequate and appropriate staffing for current and upcoming projects. * Ensure designated area, equipment, and engineering infrastructures are compliant to local, state, federal, and international regulatory agencies. * Execute high level projects from conception, consistent with upper management objectives for business growth. * Manage and execute facility and equipment updates to meet company growth and economic objectives. * Support client audits and technical visits. * Effectively communicate project status, constraints and current or potential issues to upper management. Qualifications: * BS in: Mechanical, Chemical, Electrical, Manufacturing, or similar engineering discipline required * 3+ years of related experience required * Pharmaceutical experience required * FDA regulated Industry experience required * Facility engineering experience required * Supervisory experience desired * Office (Word, PowerPoint, Excel, AutoCAD & SAP) knowledge required * Ability to work independently without routine instructions required * Exposure to Allergens and working in Controlled Area required Shift:Weekdays Mon - Fri Compensation & Benefits: This is an on-site, full-time position located in Spokane, WA. * Hiring Wage: $103,050- $164,900annually depending on experience, with opportunity for growth, promotion and annual raises. Midpoint and above is reserved for employees who have longevity with Jubilant HollisterStier and consistently exhibit outstanding performance over a period of time in the role Medical, Dental, Vision, Flexible Spending and Health Savings Accounts * Life, AD&D, Short and Long Term Disability * 401(k) with company match * Generous paid time off plan * Employee Assistance Program ******************************** * Please click on the Spokane, Wa. Link* Jubilant HollisterStier is an EEO/AA Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you require assistance applying for a position, please contact our HR Department at: ******************************

Classification: Exempt We are Alsco Uniforms. We've been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It's our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We're seeking driven professionals with ambition to grow within our company. We'd love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Production Manager is responsible for organizing and supervising work in the Production Department. Performs other duties as required and reports to the General Manager or Operations Manager. Our full-time employees enjoy: Medical, Dental, Vision, FSA/HSA Life Insurance, Disability Insurance Vacation, Sick Time, Holidays Choice of Global Cash Card or Direct Deposit Career Advancement Learning & Development Opportunities Inclusive and Diverse Team Environment Benefits may vary for positions covered by a collective bargaining agreement. Essential Functions: - Monitors and ensures implementation of recommended changes in work methods and/or equipment usage to improve labor utilization, production efficiency and department expenses. - Leads, trains, and supervises the Production staff and departments. - Responsible for overseeing all new hire training and conducts regular and ongoing training in all departments. - Consults with engineering, sales and service management to ensure the smooth operation of the plant. - Responsible for execution of company production policies, procedures and standards. - Responsible for setting, monitoring, and ensuring that standards for production, quality, housekeeping and safety are met. - Responsible for creating and adherence to department budgets, as well as hiring, discipline and employee relations. - Follow written and verbal instructions, attend meetings and perform other tasks as directed by supervision. Additional Functions: - May work with and support other branch personnel as required by supervision. Qualifications: - Have a minimum of two years of business management experience in a production environment with strong supervisory and management skills. - Good organizational skills. - Ability to lead, motivate and develop staff. - Recognize colors, sizes and types of product. Count, add and subtract accurately. - Good verbal and written communication skills in English, ability to comprehend and follow direction, as well as good time management skills and being a team player. Education: - High School graduation or similar experience. Typical Physical Activity: - Physical Demands/Requirements consist of standing, sitting, walking, stooping, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs., reading, speaking, hearing, and lifting up to 60 lbs. Typical Environmental Conditions: - Production areas of a typical industrial laundry facility which includes variations in temperature, odors, humidity, lint and dust. Travel Requirements: - Occasionally, to visit customers or possibly to attend training meetings. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/22

Full-time Description Job Title: Lead Detailer Reports To: Chad Shoquist About Us O'Donnell Metal Deck LLC is a national distributor with six locations across the country, specializing in construction materials. We're growing rapidly and evolving our internal operations to match. As we continue to scale, we're looking for smart, proactive people who thrive in process-driven environments and want to make a real impact. Position Summary At O'Donnell Metal Deck, we're building the future of construction-one project at a time. We're looking for a detail-oriented Drafter to turn complex contract documents into clear, precise, and accurate steel joist and deck layout plans. In this role, you'll prepare layouts, sections, and bills of material that meet customer specifications, align with industry standards, and reflect our company's commitment to quality and excellence. The lead detailer position is intended as an opportunity for the candidate to build fluency in our product & process with the expectation that they will develop the competencies required to assume the role of Detailing Manager. If you have an eye for accuracy, a passion for problem-solving, and want to be part of a team that values precision and craftsmanship, this is the role for you. Key Responsibilities Review and interpret contract drawings, specifications, and change orders to ensure accuracy and completeness of data. Prepare clear, detailed layout drawings for customer review and written approval. Generate accurate bills of materials (BOMs) based on layout drawings, including all loading and design requirements. Verify the accuracy and completeness of drawings and BOMs prepared by self and peers. Issue final field-use construction documents for customer use. Coordinate with steel erection drawings to ensure alignment and constructability. Maintain organized and accessible job files within the company's digital filing system for cross-departmental use. Notify Project Management of scope changes due to revised drawings or customer requests, and update records accordingly. Collaborate with document originators and stakeholders to resolve discrepancies and update submittals. Provide responsive customer support during the erection process by addressing technical questions. Utilize AutoCAD/Tekla or similar software to prepare and update drawings. Utilize Tekla Structures software to create BIM upon request. Partner with Project Management/peers to provide technical guidance and training as necessary. Partner with Project Management/peers to help develop RFI's as necessary. Partner effectively with customers, coworkers, and supervisors by maintaining clear, professional communication. Demonstrate professionalism through regular, reliable attendance and a commitment to company values. Perform other related duties as assigned. Why Join Us? Competitive salary and performance-based bonus Full benefits: health, dental, vision 401(k) with company match Career growth opportunities within a growing national business Supportive, team-oriented culture Requirements Qualifications Associate degree in Drafting, CAD Technology, or a related field; equivalent work experience may substitute for formal education. 1+ years of AutoCAD experience required; experience with Revit or Bluebeam is a plus. Proficiency with Microsoft Office Suite (Word, Excel, Outlook, Teams). Ability to read, analyze, and interpret structural drawings, specifications, and technical documents. Familiarity with steel designations on structural drawings strongly preferred. Demonstrated ability to detail complex projects with minimal supervision. Strong attention to detail and capability to serve as a project “checker,” reviewing drawings and materials for accuracy and completeness. Excellent written and verbal communication skills, with the ability to collaborate effectively with internal teams and external customers.

Do you want to help people and make a difference? Our pharmacy technicians are dedicated to providing quality care to patients when they need it most. Are you interested in helping people see better? Make someone's day by helping them choose the perfect set of glasses.At Walmart, we offer competitive pay as well as performance-based incentive awards and other great benefits for a happier mind, body, and wallet. Health benefits include medical, vision and dental coverage. Financial benefits include 401(k), stock purchase and company-paid life insurance. Paid time off benefits include parental leave, family care leave, bereavement, jury duty, and voting. Other benefits include short-term and long-term disability, company discounts, Military Leave Pay, adoption and surrogacy expense reimbursement, and more.You will also receive PTO and/or PPTO that can be used for vacation, sick leave, holidays, or other purposes. The amount you receive depends on your job classification and length of employment. It will meet or exceed the requirements of paid sick leave laws, where applicable. For information about PTO, see ************************************ Better U is a Walmart-paid education benefit program for full-time and part-time associates in Walmart and Sam's Club facilities. Programs range from high school completion to bachelor's degrees, including English Language Learning and short-form certificates. Tuition, books, and fees are completely paid for by Walmart.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to a specific plan or program terms. For information about benefits and eligibility, see One.Walmart.com. * The actual hourly rate will equal or exceed the required minimum wage applicable to the job location. Additional compensation includes annual or quarterly performance incentives. Additional compensation in the form of premiums may be paid in amounts ranging from $0.35 per hour to $3.00 per hour in specific circumstances. Premiums may be based on schedule, facility, season, or specific work performed. Multiple premiums may apply if applicable criteria are met.