Global Industrial Technologies Inc jobs in DeSoto, TX

ESSENTIAL DUTIES AND RESPONSIBILITIES Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, lift gates, etc.). Perform preventative maintenance within DOT standards. Receive road calls, assign third party vendor, and work with business partners on plan of action. Maintain a clean and safe work environment in compliance with workplace safety rules/regulations and government guidelines. Utilize fleet maintenance software system tablet to fully document equipment repair and parts used. Backup to other maintenance shop personnel. Willingness and capacity to assume increased responsibility and certificates. Other duties as assigned by manager. SUPERVISION: N/A RELATIONSHIPS Internal: All Fleet Technicians, Drivers, Coordinators and Manager External: Vendor service providers when required WORK ENVIRONMENT Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility. Must be willing to work in extreme temperatures and weather conditions. MINIMUM QUALIFICATIONS Must have 3 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic. Diagnostic and troubleshooting competency relating to equipment repairs. Successfully demonstrated independent analytical and problem-solving skills. Prior experience in administering appropriate PM program. Must furnish own personal hand tools. Able to read and write legibly (e.g., to attend trainings, hold conversations, receive safety and job-related coaching, and enter information on reports if needed); basic mathematical skills (add, subtract, divide). EDUCATION High school diploma or equivalent required. CERTIFICATIONS/TRAINING N/A LICENSES Must possess a valid driver's license. PREFERRED QUALIFICATIONS Valid Class-A CDL license and DOT certification Experience using fleet maintenance software Welding ability PHYSICAL QUALIFICATIONS OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER JOB REQUIRES WORKER TO: FREQUENCY: STAND: CONTINUOUSLY WALK: CONTINUOUSLY DRIVE VEHICLE: FREQUENTLY SIT: FREQUENTLY LIFT 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): FREQUENTLY Over 100 lbs (Very Heavy): OCCASIONALLY CARRY 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): OCCASIONALLY Over 100 lbs (Very Heavy): OCCASIONALLY PUSH/PULL 1: FREQUENTLY CLIMB/BALANCE 2: FREQUENTLY STOOP/SQUAT: FREQUENTLY KNEEL: FREQUENTLY BEND: FREQUENTLY REACH ABOVE SHOULDER: FREQUENTLY TWIST: FREQUENTLY GRASP OBJECTS 3: FREQUENTLY MANIPULATE OBJECTS 4: FREQUENTLY MANUAL DEXTERITY 5: FREQUENTLY 1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift) 2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs) 3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel) 4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 5 (Manual Dexterity: Typing, use of office machines such as copiers, printers) Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $33-$36per hour. This role will also receive overtime compensation Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Milwaukee, WI Job Type: Full Time Shift Available: 1st Compensation: $37.23/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill Matching Contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Performs work assigned by supervisor Identify follow-up work and parts required Assist in development and implementation of new systems Complete, Sign and return Work Order to Maintenance Supervisor complete with; Work Description, Symptoms, As Found, As Left, Start / Finish time, and Labor Hours and Note Deficiencies, Delays, any Job Plan Feedback Help promote and communicate Maintenance and Reliability to the Organization Other duties include housekeeping, safety training, and meetings Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025 2 years industrial maintenance experience Excellent communication skills (English written, verbal, listening) Ensure compliance with all local codes, regulations Preferred Qualifications Associate degree in Electronic Engineering or significant experience in PLC and control system troubleshooting High School Diploma or equivalent Troubleshoot limit switches, photo eye and proximity switches Proficient in reading ladder diagrams and be able to troubleshoot PLC machines without the aid of a computer Trouble shoot, repair and replace faulty electrical components through the use of hand tools and electrical test equipment Measure, cut and bend conduit such as rigid EMT, PVC, and IMC utilizing hand tools and benders Be able to Set up and troubleshoot drives, showing understanding and ability to change settings Troubleshoot PLC on line Understand the Hydraulic, pneumatic and vacuum system concepts Experience with Microsoft Office Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

This position is essential to the success of our retail stores. Customer Service Specialists work closely with wholesale and retail customers to determine their needs, answer their questions about Sherwin-Williams products, and recommend the right solutions. Customer Service Specialists are also expected to promptly resolve any customer concerns and ensure maximum client satisfaction as well as stay up-to-date with product features and maintain the high quality and visual standards of the products and store. Customer Service Specialists are tasked with achieving excellent customer service, while consistently meeting the store's sales goals. The individual selected for this role will be expected to work at Store #3063 located at: 623 S Main St, Princeton, IL 61356. This is a part time position and the starting pay rate is $17.50/hr. Job duties involve contact with customers, which may include minors; and access to cash and other payment methods, electronic equipment, personal information, store merchandise and other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company's customers, staff, employees, vendors, contractors, and the general public. At Sherwin-Williams, our purpose is to inspire and improve the world by coloring and protecting what matters. Our paints, coatings and innovative solutions make the places and spaces in our world brighter and stronger. Your skills, talent and passion make it possible to live this purpose, and for customers and our business to achieve great results. Sherwin-Williams is a place that takes its stability, growth and momentum and translates it to possibility for our people. Our people are behind the strength of our success, and we invest and support you in: Life … with rewards, benefits and the flexibility to enhance your health and well-being Career … with opportunities to learn, develop new skills and grow your contribution Connection … with an inclusive team and commitment to our own and broader communities It's all here for you... let's Create Your Possible What is the Process to get Started? Step 1 - Online Application Find the role(s) that interest you on our Careers page: ****************************** Set aside 15 minutes to create your profile by entering or importing your details from one of our job board partners Step 2 - Digital Interview Upon review of your application, qualified candidates will be invited to complete a digital video interview via HireVue, our interview partner. The interview will consist of a few behavioral based questions You'll be able to record and complete your video interview anytime, anywhere! While you can complete this video interview on your own schedule, we ask that this step be completed within 7 days of receiving an invitation Step 3 - In-Store Interview Your video interview is reviewed by a member of our Recruitment team and our top candidates are invited to meet with our team in a store, specialty wholesale branch, floorcovering facility or delivery service terminal. At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commute-it matters to us. A general description of benefits offered can be found at ***************************** Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable federal, state, and local laws including with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act where applicable. Sherwin-Williams is proud to be an Equal Employment Opportunity employer. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Please be aware, Sherwin-Williams recruiting team members will never request a candidate to provide a payment, ask for financial information, or sensitive personal information like national identification numbers, date of birth, or bank account numbers during the application process. Ensure high levels of customer satisfaction through excellent sales service Assist customers in person and over the phone by determining needs and presenting appropriate products and services Build productive trust relationships with wholesale and retail customers Process sales transactions accurately and consistent with policies and procedures Follow and achieve sales goals on a monthly, quarterly, and yearly basis Maintain precise work order files and formulas Pull appropriate products from the sales floor or warehouse Tint and mix products, as needed, to customer specifications Stock shelves and set up displays Clean store equipment Load/unload delivery trucks Assist in making deliveries, as needed Maintain in-stock and presentable condition assigned areas Remain knowledgeable on products offered and discuss available options Comply with inventory control procedures Suggest ways to improve sales Minimum Requirements: Must be at least eighteen (18) years of age Must be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the future Must have a valid, unrestricted Driver's License Must be able, with or without reasonable accommodation, to retrieve material from shelves and floor stacks and lift and carry up to 50 lbs. frequently and up to 70 lbs. on occasion Must be willing to work all scheduled hours, which may include evenings and weekends, with or without reasonable accommodation Preferred Qualifications: Have at least a High School diploma or GED Have at least one (1) year experience working in a delivery, retail, or customer service position Have previous work experience selling paint and paint related products Have previous work experience operating tinting and mixing equipment Ability to read, write, comprehend, and communicate in more than one language Ability to read, write, comprehend, and communicate in Spanish #SHWSales

Maintenance and Reliability Director Build Your Career with an Industry Leader As the global leader of premium labels, Multi-Color Corporation (MCC) helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing expertise, MCC is focused on the future-developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. Position Objective The Maintenance and Reliability Director will focus on the deployment of Total Productive Maintenance (TPM) across Multi-Color Corporation in the Americas. This hands-on leadership role oversees a team of four and drives the implementation, execution, and continuous improvement of TPM principles across 38 manufacturing facilities. The Director enhances equipment reliability, operational efficiency, and fosters a culture of safety, quality, and continuous improvement. Key priorities include developing and executing the TPM framework, training and coaching plant staff, facilitating improvement projects, driving standardization and digital transformation, and ensuring alignment with MCC's business priorities Why Work at MCC Competitive compensation Comprehensive benefits package including medical, dental, vision, disability, life insurance, and 401(k). Paid holidays including New Year's Day, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Christmas Eve, and Christmas Day. Opportunity to lead TPM transformation across a global network and make a lasting impact on MCC's operational excellence journey. Responsibilities Lead and execute the transformation and sustainability of the Total Productive Maintenance (TPM) program across the Americas organization. Develop and deploy TPM strategies aligned with corporate and divisional goals, ensuring long-term operational stability and reliability. Serve as a change agent to lead individuals and teams through TPM implementation and culture transformation. Train, mentor, and coach site leadership teams and maintenance personnel on TPM principles, tools, and methodologies. Identify, prioritize, and manage improvement projects to enhance process yield, reliability, and operational efficiency; ensure visual TPM compliance in War Rooms and at points of impact. Support plants in data-driven decision-making-using root cause analysis, condition-based monitoring, and predictive analytics to improve performance. Collaborate with cross-functional partners including Operations, Engineering, and Corporate Leadership to align TPM with business strategies. Develop and maintain standardized documentation and methodology to ensure consistent TPM deployment across all MCC sites. Promote a strong safety culture and ensure TPM integration with plant safety systems and risk mitigation initiatives. Manage department budgets, allocate resources effectively, and track performance to business priorities. Required Skills and Qualifications Bachelor's degree in Mechanical, Electrical, Chemical, or Industrial Engineering (or related field). Eight or more years of experience leading Maintenance and Reliability programs, with proven TPM deployment expertise. Strong working knowledge of Total Productive Maintenance (TPM) principles, strategies, and tools. Expertise in Computerized Maintenance Management Systems (CMMS). Proven leadership and coaching skills; ability to develop high-performing teams and influence across a matrix organization. Experience in Lean and Continuous Improvement methodologies for process optimization. Strong analytical and problem-solving skills; able to analyze data, identify risks, and make data-driven decisions. Excellent communication and collaboration skills; able to engage and influence stakeholders at all levels. Technical aptitude to integrate new technologies and digital solutions into maintenance practices. Proficient project management skills to plan, execute, and deliver cross-site improvement initiatives effectively. Ability to travel up to 75% (domestic and international as required). Diversity & Inclusion: Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law. If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. #AppcastOPT For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Values & Innovation At Under Armour, we are committed to empowering those who strive for more, and the company's values - Act Sustainably, Celebrate the Wins, Fight on Together, Love Athletes and Stand for Equality - serve as both a roadmap for our teams and the qualities expected of every teammate. Our Values define and unite us, the beliefs that are the red thread that connects everyone at Under Armour. Our values are rallying cries, reminding us why we're here, and fueling everything we do. Our pursuit of better begins with innovation and with our team's mission of being the best. With us, you get the freedom to go further - no matter your role. That means developing, delivering, and selling the state-of-the-art products and digital tools that make top performers even better. Purpose of Role Step up. Lead the floor As a Sales Keyholder, you're the right hand to our store leaders - driving sales, coaching teammates, and keeping energy high. It's the perfect first step into leadership for someone whose ready to take charge, inspire others, and make every shift count. Your Impact We count on our Sales Keyholders to: Ensure all teammates provide great customer service Lead a selling culture and enhance the customer experience Recognize and reward performance Coach, train, and support teammates Manage loss prevention, safety, and audit expectations and results Ensure the store is neat, clean, and well-stocked Open and close the store when necessary Support in driving sales and retail/omni KPI target achievement Act as the leader on duty and consistently models the brand's Athlete service standards and selling behaviors Provide in-depth information related to a wide portfolio of technical products Partner with rest of store leadership in maintaining standards covering merchandise and floor sets Evaluate store sales and payroll goals using payroll reports and tools; make scheduling adjustments to meet business needs. Build Athlete loyalty through in-store experience, using various available applications Effectively communicate with athletes, teammates, and leadership Assume Stock Keyholder responsibilities as necessary Perform other tasks as assigned by management Requirements To be considered for this role, you must meet these minimum requirements: At least 18 years old High school degree or equivalent 1+ year of retail/customer service experience Local language fluency required; basic English is a plus Available to work a flexible schedule; including evenings, weekends, and holidays Knowledgeable of store operations, visual merchandising, stockroom, risk management & safety Moderate knowledge of industry/retail operations and applying this knowledge to create solutions Advanced selling experience and comprehensive industry understanding Ability to bend, squat, reach, climb a ladder and stand for extended periods of time with or without reasonable accommodation Comfortable with or willingness to learn technology (such as hand-held and mobile devices) Strong communication skills Can stand, walk, bend and lift cartons weighing up to 25 lbs./ 12kgs during each work shift with or without accommodation Benefits & Perks Perks & benefits our Part-Time Associates receive: Generous employee discount Ability to participate in special contests with the opportunity to win merchandise and other exclusive prizes Work-Life Assistance Program to support health, personal, family or work-related challenges High-energy environment, working alongside people who appreciate the power of a team Opportunities for professional development and advancement $18.50-$20.80 USD Our Commitment to Equal Opportunity At Under Armour, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion or belief, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, family or paternal status and any other characteristic protected by applicable law. Under Armour seeks to recruit, develop and retain the most talented people representing a wide variety of backgrounds and perspectives. If a reasonable accommodation is needed to participate in the job application or interview process, please contact our Human Resources team via candidateaccommodations@underarmour.com.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Macomb Employment Status: Hourly Full-Time Function: Manufacturing Req ID: 26773 Job Responsibilities We are seeking a highly skilled Senior CMM Programmer to join our innovative manufacturing team. In this pivotal role, you will be instrumental in developing and optimizing complex coordinate measuring machine (CMM) programs to ensure precision and quality in our manufacturing processes. You will leverage your extensive expertise in metrology to drive product excellence and contribute to our mission of delivering top-tier solutions. In addition to performing the calibration of the coordinate measuring machine, you will also use precise measurement tools, such as calipers and micrometers, to ensure our products meet our customer and internal standards. Applicants need to be able to read blueprints and interpret GD&T (geometric dimensioning and tolerancing) symbols, so some technical training or professional experience is preferred. What You Will Do Interpret internal and customer engineering drawings to determine inspection requirements. Create and edit CMM programs to support part inspection and validation. Perform CMM setups, including managing multiple setups simultaneously and optimizing table space. Select appropriate measuring instruments based on blueprint specifications. Execute dimensional inspections using CMM programs and manual measurement tools. Apply GD&T principles to conduct detailed part inspections. Ensure inspection programs align with part numbers and revision levels. Complete dimensional reports for PPAP and AS9102 submissions. Conduct first article, in-process, and final inspections using hand gauges and measurement systems. Perform incoming goods inspections as needed. Accurately log and maintain inspection data for traceability and reporting. Support and uphold AS9100 quality objectives and procedures. Identify and segregate non-conforming parts, ensuring proper labeling and documentation. Maintain high standards of workmanship using only approved data, materials, and tools. Problem-Solving & Communication Skills Use analytical skills to identify product issues, determine root causes, and implement corrective actions. Troubleshoot defects and verify the effectiveness of repairs. Proactively address production delays by identifying causes and proposing preventive solutions. Communicate inspection findings clearly to team members and management. Collaborate effectively within cross-functional teams to support continuous improvement. Education and Experience Required High school diploma/GED, prior certification as a PC-DMIS CMM Programmer, OR equivalent work experience. 3+ years of relevant experience. Proven experience in CMM programming (PC-DMIS and/or Verisurf). Strong understanding of metrology and dimensional inspection techniques. Ability to read and interpret blueprints and GD&T symbols. Technical training or equivalent professional experience in a manufacturing or quality control environment. Experience with flight hardware is a must. Working knowledge of AS9100, AS9102, AS13100, ISO 9001, and other relevant quality standards. Must have strong computer skills, including Microsoft Office and databases. Ability to work independently and manage multiple priorities. Job Requirements PHYSICAL DEMANDS The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee is required frequently to work from ladders and scaffolds. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision. EXPORT CONTROL DISCLAIMER This position will include access to data, technology, and/or software source code that is subject to U.S. export controls under International Traffic in Arms Regulations (ITAR). Employment with The Lincoln Electric Company (D/B/A Baker Industries) is contingent upon either verifying U.S. person status or obtaining any necessary authorizations. Applicants will be required to answer certain questions for export control purposes and information will be reviewed by compliance personnel to ensure compliance with federal law. The Lincoln Electric Company, at its sole discretion, may choose not to apply for a license for such individuals as whose access to export-controlled data, technology, and/or software source code may require authorization. The Lincoln Electric Company may also decline to proceed with an applicant on this basis alone. EQUAL OPPORTUNITY EMPLOYER The Lincoln Electric Company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Baker Industries complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status, or disability. HARASSMENT POLICY The Lincoln Electric Company expressly prohibits any form of workplace harassment based on race, color, religion, gender, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Baker Industries' employees to perform their job duties may result in discipline up to and including discharge. ATTENTION: THIRD-PARTY RECRUITERS Lincoln Electric does not accept unsolicited resumes from third-party recruiters. Resumes submitted to any employee(s) of Lincoln Electric without a signed vendor agreement, by the Manager of Recruiting & Training, will become the property of Lincoln Electric. Verbal or written commitments from any other member of Lincoln Electric will not be considered binding terms. Lincoln Electric will not pay a fee to any third-party recruiter that has not coordinated their recruiting activity through the Recruiting Department. DISCLAIMER This job description may not include all assigned duties, responsibilities, or aspects of the job described, and may be modified at any time at the Employer's sole discretion. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Engineering Pay Range: ($24.00/hr - $38.00/hr) Target Bonus: 5.0% Req ID: 27586 Summary Fori Automation, a Lincoln Electric company, is a global leader in designing and integrating automated assembly, welding, material handling, and testing systems. We deliver world-class automation solutions to leading manufacturers worldwide. We're seeking an experienced Mechanical Designer to join our Weld Systems team in Shelby Township, MI. In this role, you'll design and develop mechanical systems for automated welding equipment, ensuring precision, performance, and manufacturability. At Lincoln Electric, we invest in our people. In addition to competitive pay, we offer an annual bonus plan, tuition reimbursement, comprehensive medical/dental/vision benefits, 401(k) with company match, paid time off, and many other outstanding benefits. What You'll Do Develop mechanical concepts and detailed designs using 2D and 3D CAD tools. Focus design on tooling and fixture creation. Create accurate Bills of Materials (B.O.M.) and design documentation. Apply engineering calculations to verify design integrity (e.g., beam stress). Utilize standard designs, specifications, and part/vehicle data to build robust systems. Organize and maintain CAD files in accordance with company and project standards. Select appropriate materials and components for optimal performance and cost. Ensure all designs meet NAAMS standards and relevant industry standards for construction, safety, and ergonomics. Collaborate with cross-functional teams to deliver high-quality automation systems on time. Required Education & Experience Bachelor's degree in Mechanical Engineering preferred (or equivalent experience). 1+ year of design/layout experience (or 2+ years in a similar role without degree). Experience designing MIG and/or resistance weld machines preferred. Proficiency in 3D CAD (Inventor, SolidWorks, or similar) and 2D AutoCAD. Strong grasp of manufacturing principles, materials, and design best practices. Ability to perform basic engineering calculations and apply advanced algebra and design techniques. Team-oriented mindset with the ability to thrive in an ISO9001:2000 environment Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Macomb Employment Status: Hourly Full-Time Function: Supply Management/Purchasing Req ID: 26887 Summary Lincoln Electric is seeking a proactive Purchasing Associate II to support our Baker Industries operation in Macomb, MI. In this role, you will manage key supplier relationships for direct and indirect materials and services, execute sourcing requirements from Buyers and corporate-led programs, and drive cost, quality, and delivery performance. Responsibilities Own supplier performance (OTD, quality, cost) and drive corrective actions to support operational goals Collaborate with Engineering, Quality, and Operations to identify, evaluate, and qualify suppliers Actively participate in site leadership meetings to align procurement with business priorities Mitigate supply risk through alternative sourcing, safety stock strategies, and supplier-managed inventory programs (VMI, consignment, etc.) Improve working capital via extended terms, stocking programs, and Supply Chain Financing (SCF) Conduct total-cost-of-ownership analysis (freight, payment terms, INCO terms, lead time, MOQ, etc.) during supplier selection Lead or support cross-functional sourcing projects to deliver best-value solutions Establish and maintain standard costs; provide monthly cost-variance forecasting critical to quoting and profitability Create and manage RFx events using Ariba e-Sourcing platform Share production forecasts and schedules with suppliers to ensure continuity of supply Champion continuous improvement in procurement processes, SAP transactions, master data accuracy, and Source-to-Pay (S2P) systems Own supplier onboarding process in compliance with company policies Ensure full adherence to ITAR, CMMC, and other regulated procurement requirements Experience U.S. citizenship required (ITAR compliance) Minimum 1 year of procurement, buying, or supply chain experience in a manufacturing environment Strong knowledge of purchasing policies, processes, and ITAR/CMMC compliance for a publicly traded company Proficiency reading technical documents (blueprints, BOMs, routings, job travelers) Demonstrated supplier management and negotiation skills Experience with consumption-based and forecast-driven planning methods Advanced skills in Microsoft Office suite; SAP and Ariba experience strongly preferred Excellent communication, analytical, and problem-solving abilities Proven ability to prioritize, multitask, and meet deadlines in a fast-paced environment High attention to detail and commitment to continuous improvement Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Macomb Employment Status: Hourly Full-Time Function: Manufacturing Req ID: 27198 Job Responsibilities PRIMARY FUNCTION Operates several different machines working with various materials. JOB DUTIES AND RESPONSIBILITIES Determine settings of machine. Calculate where to cut or bore. Shape steel, aluminum, titanium, plastic, silicon and other materials. Determine how fast or slow work piece is fed into machine. Determine how much material to remove. Select tools and materials for the job. Plan the sequence of cutting and finishing operations. Position work piece on the drill press, lathe, or milling machine. Monitor and control feed rate and speed. Ensure work piece is properly lubricated and/or cooled. Regulate temperature of work piece. Detect problems by listening for specific sounds. Adjust cutting speed to compensate for harmonic vibrations. Monitor the accuracy of cuts. Replace dull cutting tools. Check accuracy of work against PowerPoint specifications. Produce quality parts. Determine how automated equipment will cut a part. Determine cutting path. Concert path, speed, and feed information into set of instructions for machine tool. Use manual and computer-controlled machinery. Write basic programs. Modify programs in response to problems. Maintains safe operations by adhering to safety procedures and regulations. Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs. Documents actions by completing production time sheets. Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments. Additional job duties as assigned Other duties as assigned EDUCATION AND EXPERIENCE High school diploma/GED, certificate in Machine Tool Technology or equivalent work experience PHYSICAL DEMANDS Physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee is required frequently to work from ladders and scaffolds. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock. The employee is frequently exposed to moving mechanical parts. Job Requirements Export Control Disclaimer: This position will include access to data, technology, and/or software source code that is subject to U.S. export controls under International Traffic in Arms Regulations (ITAR). Employment with The Lincoln Electric Company (D/B/A Baker Industries) is contingent upon either verifying U.S. person status or obtaining any necessary authorizations. Applicants will be required to answer certain questions for export control purposes and information will be reviewed by compliance personnel to ensure compliance with federal law. The Lincoln Electric Company, at its sole discretion, may choose not to apply for a license for such individuals whose access to export-controlled data, technology, and/or software source code may require authorization. The Lincoln Electric Company may also decline to proceed with an applicant on this basis alone. EQUAL OPPORTUNITY EMPLOYER The Lincoln Electric Company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Baker Industries complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status, or disability. HARASSMENT POLICY The Lincoln Electric Company expressly prohibits any form of workplace harassment based on race, color, religion, gender, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Baker Industries' employees to perform their job duties may result in discipline up to and including discharge. ATTENTION: THIRD-PARTY RECRUITERS Lincoln Electric does not accept unsolicited resumes from third-party recruiters. Resumes submitted to any employee(s) of Lincoln Electric without a signed vendor agreement, by the Manager of Recruiting & Training, will become the property of Lincoln Electric. Verbal or written commitments from any other member of Lincoln Electric will not be considered binding terms. Lincoln Electric will not pay a fee to any third-party recruiter that has not coordinated their recruiting activity through the Recruiting Department. DISCLAIMER This job description may not include all assigned duties, responsibilities, or aspects of the job described, and may be modified at any time at the Employer's sole discretion. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Gainesville Employment Status: Hourly Full-Time Function: Maintenance Pay Range: ($53,381.00 - $80,071.00) Target Bonus: % Req ID: 27629 Job Responsibilities Job Requirements Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Plymouth - 46247 Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: $27 - $31.50 Target Bonus: 5.0% Req ID: 26585 Job Responsibilities • Repair and replace defective parts in generators, motors, controllers, switchboards, switches, conductors and other electrical fixtures. • Install, maintain and repair electro-mechanical, electrical, and electronic components. • Wiring motor power controls equipment circuits, reading and interpreting blueprints, wiring diagrams and schematics. • Testing wire connections with test equipment using multi-meters and oscilloscope. • Assemble junction boxes, back plates and harnesses per print. • Work closely with engineers and general contractors. • Travel as required. • Participate in ISO training and audits. • Any other assignments as deemed appropriate Job Requirements •High School diploma or equivalent is required. A Technical degree is a plus. 2 - 3 years of hands-on electrical experience working on a plant floor is preferred. • Ability to identify and implement efficient paths of action to finish assigned work • Should be able to test, calibrate, diagnose and repair various devices • Must be able to read and follow blueprints • Must be able to communicate clearly, articulately and professionally • Must have appropriate schedule flexibility, sense of urgency, motivation and versatility to make a substantial contribution to the organization's success • Ability to interact positively and constructively with all RedViking team members while representing company in a professional manner • Willingness to work “above and beyond” in order to meet company goals • Ability to travel to other company sites as well as customer sites as required • Well organized, detail oriented and self-motivated • Must have excellent time management skills • Must have excellent oral and written communication skills Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Salary Full-Time Function: Engineering Pay Range: ($93,254.24 - $125,000.00) Target Bonus: 10.0% Req ID: 27529 Summary Fori Automation, a Lincoln Electric Company, is seeking a highly skilled Project Manager for our Shelby Township, MI location. Fori Automation specializes in designing, building, and integrating custom automated systems for material handling, assembly, testing, and welding, with a strong focus on engineering and manufacturing solutions for the automotive, aerospace, and defense industries. The Project Manager will be responsible for managing all engineering, design, procurement, manufacturing, and integration phases of custom automation projects. This includes contract reviews, design and engineering reviews, procurement, manufacturing, internal and customer buyoffs, as well as shipping, installation, production support, and training. In addition to competitive pay, Lincoln Electric offers an annual bonus plan, tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits! What You Will Do Project Execution & Engineering Leadership: Manage engineering and manufacturing teams throughout the project lifecycle, ensuring the integration of complex systems for our clients. Lead design reviews, procurement processes, and oversee the execution of manufacturing workflows. Budget and Financial Management: Monitor project financial performance, including maintaining performance to budget, cash flow management, and implementing change control processes to minimize cost overruns and maximize project profitability. Manufacturing & Quality Control Oversight: Collaborate closely with internal teams and suppliers to ensure the manufacturing and assembly of systems meet high-quality standards, manufacturing specifications, and customer requirements. Resolve engineering, quality, and production issues in a timely manner to maintain on-time delivery. On-Time Delivery & Schedule Management: Oversee detailed project timelines, ensuring all deliverables are met within established schedules. Adjust timelines and work plans based on manufacturing or engineering constraints, ensuring continuous alignment with customer requirements. Team Leadership & Problem Resolution: Lead cross-functional technical teams to resolve engineering and manufacturing issues, ensuring that technical solutions meet performance and quality standards. Foster a collaborative environment while managing competing priorities across multiple projects. Reporting & Communication: Provide weekly status updates and detailed project reporting to senior management through tools like spreadsheets, project timing matrices, and internal issue tracking. Communicate technical details, project risks, and resolutions effectively to both internal teams and customers. Travel & Customer Interaction: Travel may be required (~10%) for customer kickoffs, site reviews, critical issue meetings, and final acceptance. Support customer engagement by providing technical expertise, troubleshooting, and guiding them through the commissioning process. What We're Looking For Minimum of 10+ years of project management experience in an engineering or manufacturing environment, preferably in the automated systems, robotics, or advanced manufacturing industries. AGV experience highly desirable. PMP certification is preferred, but not essential. Strong communication, leadership, and organizational skills, with a proven ability to manage cross-functional engineering teams and manufacturing processes. Proficiency in project management software, including Microsoft Project, Excel, Word, and PowerPoint. Technical Expertise: Knowledge and hands-on experience with assembly systems, tooling equipment, automated systems integration, and manufacturing processes. Demonstrated ability to create, execute, and adjust complex project work plans while managing scope, quality, and risks in a fast-paced engineering environment. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

This position works closely with wholesale customers to determine their floorcovering needs, answer their questions about Sherwin-Williams products, and recommend the right solutions. Branch floorcovering coordinators are also expected to promptly resolve any customer concerns and ensure maximum client satisfaction as well as stay up-to-date with product features and maintain the high quality and visual standards of the products and branch. Click here to learn more about our Floorcovering Division and the services we provide to our customers across the country. The individual selected for this role will be based at Store #3721, located at: 523 Thomas Dr Bensenville, IL, 60106-1620 Job duties involve contact with customers, which may include minors; and access to cash and other payment methods, electronic equipment, personal information, store merchandise and other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company's customers, staff, employees, vendors, contractors, and the general public. At Sherwin-Williams, our purpose is to inspire and improve the world by coloring and protecting what matters. Our paints, coatings and innovative solutions make the places and spaces in our world brighter and stronger. Your skills, talent and passion make it possible to live this purpose, and for customers and our business to achieve great results. Sherwin-Williams is a place that takes its stability, growth and momentum and translates it to possibility for our people. Our people are behind the strength of our success, and we invest and support you in: Life … with rewards, benefits and the flexibility to enhance your health and well-being Career … with opportunities to learn, develop new skills and grow your contribution Connection … with an inclusive team and commitment to our own and broader communities It's all here for you... let's Create Your Possible What is the Process to get Started? Step 1 - Online Application Find the role(s) that interest you on our Careers page: ****************************** Set aside 15 minutes to create your profile by entering or importing your details from one of our job board partners Step 2 - Digital Interview Upon review of your application, qualified candidates will be invited to complete a digital video interview via HireVue, our interview partner. The interview will consist of a few behavioral based questions You'll be able to record and complete your video interview anytime, anywhere! While you can complete this video interview on your own schedule, we ask that this step be completed within 7 days of receiving an invitation Step 3 - In-Store Interview Your video interview is reviewed by a member of our Recruitment team and our top candidates are invited to meet with our team in a store, specialty wholesale branch, floorcovering facility or delivery service terminal. At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commute-it matters to us. A general description of benefits offered can be found at ***************************** Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable federal, state, and local laws including with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act where applicable. Sherwin-Williams is proud to be an Equal Employment Opportunity employer. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Please be aware, Sherwin-Williams recruiting team members will never request a candidate to provide a payment, ask for financial information, or sensitive personal information like national identification numbers, date of birth, or bank account numbers during the application process. Ensure high levels of customer satisfaction through excellent sales service Assist customers in person and over the phone by determining needs and presenting appropriate floorcovering products Build productive trust relationships with wholesale customers Refer potential wholesale leads to the sales reps and store staff Process orders, schedule/coordinate installations with installers and customers Check installers' orders for accuracy before material leaves store Process sales transactions accurately and consistent with policies and procedures Follow and achieve sales goals on a monthly, quarterly, and yearly basis Maintain precise work order files Pull appropriate products from the sales floor or warehouse Clean store equipment Load/unload delivery trucks Assist in making deliveries, as needed Maintain in-stock and presentable condition assigned areas Remain knowledgeable on products offered and discuss available options Comply with inventory control procedures Suggest ways to improve sales Minimum Requirements: Must be at least eighteen (18) years of age Must be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the future Must be able, with or without reasonable accommodation, to retrieve material from shelves and floor stacks and lift and carry up to 50 lbs. frequently and up to 70 lbs. on occasion Must be willing to work all scheduled hours, which may include evenings and weekends, with or without reasonable accommodation If internal to Sherwin-Williams, you must have received at least a “meets expectations” (3) rating on your most recent performance appraisal If internal to Sherwin-Williams, you must have completed all HR Cloud eLearning courses required for your current position Preferred Qualifications: Have at least a High School diploma or GED Have a valid, unrestricted Driver's License Have at least one (1) year experience working in a delivery, retail, or customer service position Have previous work experience selling floorcovering and/or floorcovering products Have prior work experience operating floorcovering cutting equipment Ability to read, write, comprehend, and communicate in more than one language Ability to read, write, comprehend, and communicate in Spanish #SHWSales

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: $22.51-$29.00 Target Bonus: 5.0% Req ID: 26396 Job Responsibilities Take direction from Leader and/or Supervisor Provide training and assistance to new employees. Provide feedback on job status to Electric/Pneumatic Assembly Supervisor. Assist in start-up/de-bug of equipment. Assure good craftsmanship on jobs that are being built. Follow and enforce good housekeeping practices with all department personnel. Know and understand due dates for jobs and schedule work accordingly. Work with Controls Engineers to correct any problems with design of the machine/controls. Recommend as appropriate work methods and/or materials that will improve existing designs. Travel as needed to assist in installations, de-bug, tryout, or problem solving at customer locations. Follow-up with supervisor on daily basis to report progress of job(s) being worked on.. Recommend, initiate, or follow-up on engineering changes and document according to procedure(s). Assist in packing and loading of machines for shipment. Fill-in where required for absences. Order material and follow-up with Receiving when required. Must know how to read and interpret build prints. Job Requirements Education: High School Diploma required. Journeyman's card or Journeyman status preferred Experience: 5 years minimum experience as industrial pipefitter Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Fleet Supervisor to join our UniFirst community. As a Supervisor in the Maintenance Department, you will be ensuring our fleet vehicles are properly functioning and regularly maintained as well as managing and mentoring our Fleet Technicians. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you'll be doing: Manage overall upkeep and maintenance of fleet vehicles. Verify that the appearance of fleet vehicles meet UniFirst standards. Ensure vehicle compliance and safety requirements are met. Implement preventative maintenance programs for vehicles and equipment, and schedule predictive & preventative maintenance. Mentor, manage, and motivate performance of Fleet Technicians. Provide ongoing learning and development opportunities for all Team Partners. Produce reports related to work performance and departmental budget. Develop and maintain relationships with vendors to ensure best pricing for vehicle parts. Plow and salt location parking lot as needed. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED required. Must be 21 years of age or older. 5 years of equivalent experience required. Valid driver's license and a safe driving record are required. A CDL license is preferred. Must meet DOT requirements. Strong leadership and communication skills; ability to train potential techs. Must have experience in the use of diagnostic software and fleet management systems. Ability to work overtime as needed is required. Ability to lift up to 80lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 2 billion-dollar organization. The estimated salary for this position ranges from $51,613 to $61,812 yearly. Actual compensation will vary based on factors including but not limited to the candidate's skills, experience, and qualifications. Geographic differentials may also apply depending on the position's location. There is no application deadline for this role; recruitment will remain open until the position is filled. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Build Your Career with an Industry Leader As the global leader of premium labels, Multi-Color Corporation (MCC) helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing expertise, MCC is focused on the future-developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. Position Objective The Reliability Engineer is a key driver of MCC's Total Productive Maintenance (TPM) strategy-responsible for building equipment reliability and asset care systems that enable world-class manufacturing performance. This role leads the analysis, design, and execution of preventive and predictive maintenance programs, while embedding TPM principles across all facility and utility systems. The Reliability Engineer partners closely with Maintenance, Operations, and Continuous Improvement teams to establish a culture of autonomous maintenance, equipment ownership, and proactive problem prevention. By developing standard work, training, and data-driven reliability programs, this position ensures our plants operate safely, efficiently, and with minimal unplanned downtime-directly supporting MCC's operational excellence and lean transformation goals. Why Work at MCC Competitive compensation: $95,000 - $130,000 Comprehensive benefits package including medical, dental, vision, and 401(k). Paid holidays including New Year's Day, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Christmas Eve, and Christmas Day. Opportunity to be part of a global leader in sustainable packaging and drive TPM excellence that transforms how our sites operate. Responsibilities Total Productive Maintenance (TPM) Leadership Serve as a TPM subject matter expert, driving implementation of MCC's TPM pillars (Focused Improvement, Autonomous Maintenance, Planned Maintenance, Early Equipment Management, and Skills Development). Partner with plant leadership to design and execute site-specific TPM deployment roadmaps and maturity assessments. Lead cross-functional kaizen events to identify equipment losses, eliminate chronic issues, and improve OEE (Overall Equipment Effectiveness). Coach maintenance and operations teams in root cause analysis, condition-based monitoring, and daily equipment care standards. Champion Autonomous Maintenance by training operators in basic inspection, cleaning, and lubrication activities to increase equipment ownership and engagement. Develop and track key performance indicators (KPIs) for reliability, including MTBF (Mean Time Between Failures), MTTR (Mean Time To Repair), and OEE. Preventive & Predictive Maintenance Ensure all equipment meets MCC safety, quality, and operational standards. Lead the development and execution of robust preventive and predictive maintenance programs. Audit and improve AssetEssentials (or other CMMS) data accuracy, utilization, and reporting to enable effective decision-making. Analyze failure modes, equipment histories, and maintenance data to identify improvement opportunities. Partner with engineering and operations to plan equipment upgrades or replacements to improve reliability. Mentor and coach Maintenance teams to build a proactive, data-driven reliability mindset. Training & Capability Building Design and facilitate training programs for maintenance and production personnel on TPM, equipment care, and reliability fundamentals. Develop standard work and visual controls to support consistent maintenance practices across MCC sites. Collaborate with Corporate Standards Committees to align training content with global TPM deployment and corporate best practices. Communicate training plans and progress to site leadership, ensuring accountability and alignment to TPM goals. Travel Travel may be required up to 75%, including daily, overnight, or extended stays based on business needs (e.g., 10 days on / 4 days off). Travel frequency will be determined by the supervisor based on TPM, preventive maintenance, and training priorities. Qualifications Bachelor's degree in Engineering, Maintenance Management, Facility Management, or a related technical field (or equivalent experience). Minimum 10 years of reliability, maintenance, or operations experience in a manufacturing environment. Demonstrated expertise implementing Total Productive Maintenance (TPM) or similar reliability-centered maintenance systems. Strong knowledge of mechanical, electrical, pneumatic, and hydraulic systems. Proven success leading maintenance teams and improving equipment performance in a lean manufacturing setting. Experience facilitating TPM kaizens, OEE improvement projects, or AM/PM pillar activities. Familiarity with CMMS (AssetEssentials or equivalent) and maintenance data analytics. Preferred Skills Proven ability to lead TPM deployment or coach site teams through TPM maturity stages. Strong analytical and problem-solving skills; able to identify patterns in maintenance data and drive systemic solutions. Excellent written and verbal communication skills; ability to train and engage employees at all levels. Advanced Excel or data visualization skills for performance tracking and analysis. Self-motivated, results-oriented, and capable of managing multiple priorities in a fast-paced environment. Demonstrated understanding of Lean tools such as 5S, Kaizen, SMED, and Standard Work. Confident decision-maker with a collaborative, hands-on approach to problem solving. Physical Requirements Regularly works in a manufacturing environment; must be comfortable standing for extended periods and navigating production areas. Must be able to lift up to 40 lbs. and wear required personal protective equipment (hearing, eye, and foot protection). Occasional work in an office environment, using computers and communication tools. Flexibility to work varying shifts or schedules as business needs dictate. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. #AppcastOPT For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Engineering Req ID: 26527 Summary Fori Automation, LLC, a Lincoln Electric Company, is a global supplier of welding, assembly, material handling, and testing equipment for automotive and non-automotive customers worldwide. Fori Automation focuses on delivering cost-effective, highly engineered products and systems designed and manufactured globally with localized sales, project management, and service. We are seeking an experienced Controls Software Engineer for our Shelby Township, MI site with a background in industrial software development. The Controls Software Engineer will initially support active projects and then transition to completing projects directly. They will take the lead on developing software on new projects and debug software on new machines. This role requires travel to customer sites for equipment installation and customer interaction. What You Will Do Design PLC software and HMIs for industrial automation equipment Debug and troubleshoot PLC software and HMIs Collaborate with cross-functional teams to maintain project timelines and critical path milestones. Maintain task lists and reports of open items. Maintain project design documentation and prepare customer deliverables. Ensure the controls engineering process is tracked and followed. Assist customers and local tradespeople in troubleshooting equipment issues. Conduct end-user training on equipment operation. Education & Experience Requirements Electrical Engineering or Computer Engineering degree preferred; Mechatronics degrees will also be considered. Minimum of two years of experience as a Controls Engineer or Controls Software Engineer with experience in designing Rockwell Logix 5000 or Siemens S7-1500 family processors. Knowledge or education in electrical circuits, schematic reading, design, and troubleshooting. Experience with electrical CAD systems, such as AutoCAD Electrical and/or ePLAN Experience with PLC programming in ladder and structured text. Experience programming HMIs Travel required: approximately 30% domestic and international. Weekend work may be required based on project schedules. Preferred Experience in computer programming languages, such as VB, C/C++, or C#. Experience with Rockwell and Siemens HMI preferred. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Job Summary Details: The HVAC Technician is responsible for operating, maintaining, and performing repairs on assigned HVAC and Refrigeration equipment and controls, chilled water systems, boilers, and various other mechanical, electrical and building systems in such manner as to eliminate system downtime and ensure optimal client relations. At ABM, our respect for team members comes with a commitment to a diverse workforce, making us a leader in our industry. Enjoy clear career growth programs and support. In return for your expertise, you'll enjoy excellent training, industry-leading benefits, and unlimited opportunities to learn and grow. Immediate Opening: HVAC Technician ABM is actively seeking a skilled Maintenance HVAC Technician to join our team immediately. If you're ready to bring your expertise to a company that values your contributions and invests in your future, we want to hear from you today. The Maintenance HVAC Technician is responsible for operating, maintaining, and performing repairs on assigned HVAC and Refrigeration equipment and controls, chilled water systems, boilers, and various other mechanical, electrical and building systems in such manner as to eliminate system downtime and ensure optimal client relations. At ABM, our respect for team members comes with a commitment to a diverse workforce, making us a leader in our industry. Enjoy clear career growth programs and support. In return for your expertise, you'll enjoy excellent training, industry-leading benefits, and unlimited opportunities to learn and grow. Location: Gulfstream Facilities, Savannah, GA Schedule: Monday - Friday | 3:00 PM - 11:30 PM (2nd shift position) 💵 Compensation: $23 - $33/ hourly + 10% shift differential The pay listed is the salary range for this position. Any specific offer will vary based on the successful applicant's education, experience, skills, abilities, geographic location, and alignment with market data. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM's benefits, visit ABM Team Member Benefits | Front Line Team Members | (Programa de Beneficios de ABM) 🛠️ Key Responsibilities As a Maintenance HVAC Technician, you'll be responsible for: Troubleshoot, calibrate and adjust pilots, thermostats and burners, transformers, controls, relays, heaters, elements, switches and controls on electrical systems Installs, maintains and repairs ventilation and air conditioning systems and equipment Identifies maintenance risks on equipment Diagnoses electrical and mechanical faults for HVAC systems Cleans, adjusts and repairs systems, and performs warranty services Performs emergency repairs promptly and efficiently Performs preventative maintenance on equipment Ensures compliance with appliance standards and with Occupational Health and Safety Act Completes other duties as assigned Willingness to Work at Various Heights: The ideal candidate must be comfortable working in elevated environments. This includes tasks that may require being at different heights for extended periods. Ladder Climbing: Regular climbing of ladders is a critical part of this position. The candidate must be capable of safely ascending and descending ladders of various sizes and types. Utilizing Various Lifts: Proficiency in operating a range of lifts is essential. This involves maneuvering scissor lifts, boom lifts, and other mechanical devices to reach higher areas. ✅ Qualifications We're looking for candidates who are dependable, experienced, and ready to make an impact. Ideal candidates will have: 3-5 years of HVAC maintenance experience (commercial/industrial) EPA 608 Certification High school diploma or GED Strong understanding of building systems and safety protocols Ability to work at heights and operate various lifts Knowledge of occupational hazards and safety precautions. Skill in using hand and power tools. Must be authorized to work in the US Legal authorization to work in the U.S. 🎖️ Veterans Encouraged to Apply We proudly welcome military veterans and recognize the value of your experience. Relevant MOS Codes: Army: 51L | Air Force: 3E131 | Coast Guard: 1701 Navy: 3E1X1 | Space Force: H190 | Marines: 1161 Apply Now - Start Your Career with ABM Don't wait-this opportunity won't last long. If you're ready to join a team that values your skills and supports your growth, apply today and take the next step in your career. ABM is a military and veteran friendly employer, veterans and candidates with military experience encouraged to apply. Military Occupational Specialty Code: 91C, UT, 1161, 3E1X1 #300 About Us ABM (NYSE: ABM) is one of the world's largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM's comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries - from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit ******************* ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call ************. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you'll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you're looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at ******************* ABM does not accept unsolicited resumes.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Macomb - Mile Req ID: 27990 Job Responsibilities Work in coordination with the Manager and other coworkers to ensure that all jobs are welded to the specifications of each job and meets the outlined requirements. JOB DUTIES AND RESPONSIBILITIES Operating equipment using safe work habits. Inspect welds and work pieces to acceptance of the standard they are working to. Measure work pieces with straight edges, tape measure, scale, or templates to ensure proper fit. Weld steel, stainless steel, aluminum, invar or other specified alloys per their qualifications and the applicable WPS. Clamping, holding, tack-welding, bracing, grinding or bolting component parts to obtain required configurations and positions for welding. Maintains safe operations by adhering to safety procedures and regulations. Lift or move materials and finished products using overhead cranes / hi-lo Able to read drawings and weld symbols Maintains continuity among work shifts by adhering to required documentation and communicating actions, irregularities, and continuing needs. Other duties as assigned EDUCATION AND EXPERIENCE High school diploma/GED, certificate in Machine Tool Technology or equivalent work experience Job Requirements PHYSICAL DEMANDS - Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee is required frequently to work from ladders and scaffolds. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision. WORK ENVIRONMENT - Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock. The employee is frequently exposed to moving mechanical parts. Export Control Disclaimer: This position will include access to data, technology, and/or software source code that is subject to U.S. export controls under International Traffic in Arms Regulations (ITAR). Employment with The Lincoln Electric Company (D/B/A Baker Industries) is contingent upon either verifying U.S. person status or obtaining any necessary authorizations. Applicants will be required to answer certain questions for export control purposes and information will be reviewed by compliance personnel to ensure compliance with federal law. The Lincoln Electric Company, at its sole discretion, may choose not to apply for a license for such individuals whose access to export-controlled data, technology, and/or software source code may require authorization. The Lincoln Electric Company may also decline to proceed with an applicant on this basis alone. EQUAL OPPORTUNITY EMPLOYER -The Lincoln Electric Company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Baker Industries complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. ATTENTION: THIRD-PARTY RECRUITERS -Lincoln Electric does not accept unsolicited resumes from third-party recruiters. Resumes submitted to any employee(s) of Lincoln Electric without a signed vendor agreement, by the Manager of Recruiting & Training, will become the property of Lincoln Electric. Verbal or written commitments from any other member of Lincoln Electric will not be considered binding terms. Lincoln Electric will not pay a fee to any third-party recruiter that has not coordinated their recruiting activity through the Recruiting Department. DISCLAIMER -This position may have access to various types of Controlled Unclassified Information (CUI) and/or information and tangible items subject to U.S. export controls, as well as be subject to certain customer/contractual requirements. Therefore, the individual selected for the position may be required to meet certain citizenship, immigration, and/or location-related requirements, as well as screenings, background checks and additional training. The Company, in its sole discretion, will determine whether or not to seek a contractual waiver or regulatory export authorization if required. Employment is contingent upon meeting applicable qualifications, as determined by the Company, as well as adhering to all relevant federal, state, and local laws and regulations. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.