Post job

Quality Assurance Technician jobs at Golden State Foods

- 493 jobs
  • Plating Process Technician

    Headway Technologies 4.5company rating

    Milpitas, CA jobs

    TITLE: PLATING PROCESS TECHNICIAN FLSA STATUS: NON-EXEMPT A SHIFT: MONDAY THRU WEDNESDAY AND EVERY OTHER THURSDAY 6:00 AM TO 6:00 PM REPORTS TO: DIRECTOR, PLATING PROCESS ENGINEERING Under the direction of the Director of Plating Process Engineering, the Plating Process Technician provides support to the engineering teams in the plating area, including assisting with wet etch process, preparing and maintaining recipes, reviewing and documenting process or procedures, and expediting and dispositioning prototype wafers; maintains process controls using Statistical Process Control (SPC), collects and analyzes data, and recommends corrective action. This position is located in Milpitas, California. ESSENTIAL FUNCTIONS: Provides support to the engineering teams in the plating, wet etch, and stripping process areas Supports the plating, wet etch, and stripping processes by preparing, maintaining, and setting up recipes to ensure an efficient and consistent process Reviews and documents processes and procedures; partners with engineering to implement changes effectively Expedites and dispositions prototype wafers in the plating, wet etch and stripping areas Assists engineers to run plating process development experiments, collects and analyzes data, and recommends corrective action if required Reviews and maintains process controls using SPC and prepares charts and graphs Assists with routine trouble-shooting and resolves basic process-related issues Participates in and recommends modifications to procedures or processes in support of continuous improvement initiatives Collaborates with Engineering to qualify or approve new processes or procedures Creates reports, charts, or graphs on an ad-hoc or routine basis Prepares daily pass down report for engineers, next shift plating process technicians, and manufacturing plating technicians Responds to inquiries from other team members, managers, or departments Adheres to all safety policies and procedures as required Performs other duties of a similar nature or level* MINIMUM QUALIFICATIONS: Associates degree in Electronics or Industrial Technology and/or equivalent relevant experience Two years of experience working in the semiconductor industry Knowledge of plating, wet processes and procedures Hands on experience using metrology tools such as pH meter, Tencor Thickness Profiler, XRF, and B-H loop tools Proficient in the use of Microsoft Office Applications Required Knowledge, Skills, and Abilities: Knowledge of semiconductor or hard disk drive (HDD) principles and processes Knowledge and ability to use SPC to maintain process controls Knowledge of plating, wet processes and procedures Ability to collect and analyze data, present findings, and recommend corrective action Ability to adhere to all safety policies and procedures Ability to communicate effectively with all levels of employees and management Demonstrated ability to follow routine verbal or written instructions Demonstrated problem solving and organizational skills Demonstrated time management and prioritization skills Skilled at resolving issues quickly and efficiently Flexible and able to prioritize The hourly rate for this full-time position is between $25.00-$40.00 + bonus target + benefits. Within the range the individual pay may differ depending on additional factors including job responsibilities, job related knowledge, skills, abilities, education, and experience. The hourly pay range shown is subject to change and may be modified periodically. WORKING CONDITIONS: The Plating Process Technician works primarily in an indoor environment on A shift which is Monday thru Wednesday and every other Thursday 6:00 AM to 6:00 PM. The schedule may be altered from time-to-time to meet business or operational needs; may travel from building-to-building as needed. Works in a class 100 ESD sensitive wafer manufacturing facility; wears a cleanroom (bunny) suit, including hood, gloves, safety glasses, booties, and mask. May be exposed to hazardous conditions, chemicals, fumes, and/or gases during the course of work day; Stands and walks; performs various fine grasping movements, bends, and twists; operates a computer and enters information using a keyboard, operates a telephone, and other office equipment. Must be able to load and unload various wet etch chemical solutions several times per shift. May be required to push, pull, or lift up to 25 pounds. *Other duties of a similar nature or level are duties that may be required, but may not be specifically listed in the job description or posting. TDK/Headway Technologies, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability, or genetics. Applicants requiring accommodation in order to complete the application process should contact the Headway Human Resources Department.
    $40k-54k yearly est. 1d ago
  • Quality Control Technician

    Jaipur Living 4.6company rating

    Acworth, GA jobs

    “Let goodness, fairness, and most importantly, love prevails in business; profits will inevitably follow.” - NK Chaudhary, founder Jaipur living is a socially conscious luxury brand with a passion for people, products, and design. A differentiated challenger brand, Jaipur Living is known for its beautiful rugs and textiles. Jaipur Living products can be found in the finest homes, and the company prides itself in providing only the highest quality products, a transparent and ethical supply chain, and distinctively thoughtful customer experience, with personalized support and custom offerings. Headquartered in a northwestern suburb of Atlanta, Jaipur Living designs, manufactures, and distributes rugs and other textiles through its extensive network of high-end interior designers and design firms, national retailers, and third-party e-commerce partners. The company continues to grow rapidly, experiencing double-digit annual growth every year for the past decade. This growth can be attributed to the care Jaipur Living puts not only in its customers but its employees as well. Employees at Jaipur Living are encouraged to collaborate, think independently, and stretch the creative process to develop new ways of marketing and distributing their products around the world. In August 2022, the company opened a new studio adjacent to its headquarters that, at over 17,000 square feet, functions as a communal space for design professionals to visit to experience Jaipur Living's products. The studio encapsulates not only our beautiful product but also the ways Jaipur makes lives beautiful through The Jaipur Rugs Foundation. What we do for our team members: Give competitive benefits and salaries Provide a friendly and professional work environment Maintain a modern, sleek facility, which complements our attitudes and desires Create opportunities for growth inside the company Give access to an on-site basketball court and gym complete with a yoga studio and showers Encourage employees to collaborate over an organic community garden Create employee events that build relationships and just have some fun! Our Values Empowerment • Inclusiveness • Responsibility • Progressive Learn more about our company story here: **************************************************** The Jaipur Rugs Foundation Since 2004, the Jaipur Rugs Foundation has worked to improve the lives of rug-weaving artisans in India. This is done through training, skills development, and social interventions. By focusing on the ideas and solutions that create social value, the Foundation supports the dignity and heritage of these traditional artisans, believing that healthy and sustainable communities are key to the survival of traditional rug weaving. Jaipur Living has made ethical and socially conscious global citizenship the foundation of its business. Through social initiatives and the Jaipur Rugs Foundation, the company supports a supplier ecosystem without a middleman of more than 40,000 artisans in 700 villages across India by providing them with a livable wage, access to health care, leadership education, and opportunities for personal growth and development. Combining time-honored techniques and of-the-moment trends, every Jaipur Living product is as ethically and responsibly made as it is beautiful. Learn more about the Jaipur Rugs Foundation here: *************************** Overview The Quality Control Technician will be a key member of the US Supply Chain team, collaborating and communicating with receiving, customer success, sales, inventory planning and other departments. The Quality Control Technician is responsible for supporting the execution of quality inspection processes and procedures by physical inspections. Ultimately the goal is to provide our customers with a high quality, beautiful product. This is the perfect role for someone who likes a combination of physical and mental work! What You Will Be Doing: Collaborate with customer success, sales, receiving and overseas teams to identify and correct quality issues. Maintain an ongoing list of problem vendors and problem items. Facilitate protocol for reviewing receipts of these items until all issues are resolved. Works under general supervision to perform routine product inspections related to labeling, packaging, color and size quality issues, following the relevant company's Standard Operating Procedures (SOP's) and methods. May be required to receive, sort, log issues into master qc log and prepare and apply labels Demonstrates good and safe work habits and enforces a clean working environment. May be required to archive, return, or dispose of inspected inventory as per the established procedure Will be required to operate warehouse machinery used for the purpose of re-stocking inspected inventory. Skills & Minimum Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. High School Diploma or equivalent is required Self-motivated and able to work independently when necessary Excellent relationship-building, and communication skills Strong organizational skills with attention to detail. Problem solving skills Proficiency with Microsoft Office Suite (Word, Excel) Physical Requirements: While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms; and talk and hear. The employee must be able to stand, walk, bend, squat and crawl. The employee must frequently lift and/or move up to 20 pounds. Ability to react quickly to sounds. Work in an environment with varying temperatures. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Must be able to take directional cues directly and indirectly. Employment at Jaipur is contingent on the completion of a criminal background check and a drug screen, with the results being negative. Jaipur employees are subject to pre-employment, post-injury, post-accident, reasonable suspicion, and random testing for illegal drug usage. Management retains the discretion to add or change the duties of this position at any time. Management retains the discretion to add or change the duties of this position at any time.
    $34k-43k yearly est. 5d ago
  • Quality Control Inspector

    Ingersoll Rand 4.8company rating

    Burbank, CA jobs

    About Us Haskel, an Ingersoll Rand Company, is a High-Pressure Technology Solutions. We specialize in Air-Driven Liquid Pumps, Air-Driven Refrigerant Pumps, Hydraulic Drive Compressors, Gas Booster Compressor System, BuTech High-Pressure Valves and Hydrogen Valves Fitting and Tubing. Job Summary This role is responsible for ensuring the quality control cell is actively engaged to meet daily customer demand and production schedule. Performs receiving, in-process and/or final inspection of hardware. Conducts complex inspections as defined by quality/inspection plans or per directions of quality management/engineering. Uses a complete range of precision tools and instruments requiring advanced inspection skills and techniques. Ensures that all gauges/tools used are properly calibrated. Identify accurate and efficient means of inspection techniques. Works with general/minimal supervision. Train and provide directions to the Quality Control team under the supervision of the Quality Control Manager. Responsibilities The Quality Team Lead will inspect products by using a variety of inspection tools/devices, work instructions and computer to perform a series of inspections to correctly verify incoming parts, in-process and completed assemblies. Verify supplier material certifications, including special processes, and ensure compliance with quality/PO requirements. Creates supporting documentation (data books, certificates of conformance, etc…) Support disposition of discrepant materials (MRB) in accordance with appropriate quality procedures and maintain low inventory of on-hold parts. Verifies first articles from suppliers and internal departments. Prepares and processes records and reports to document supplier/operations performance. Qualify supplier components and/or systems for assuring conforming product. Adheres to calibrations system of inspection, measuring and test equipment. Applies Statistical Quality Control techniques as directed. Assist with interpretation of drawings, specifications and quality requirements. Properly process goods for outside processing, investigates and evaluates component parts returned and nonconforming product. The Quality Team Lead provides effective training to the quality control cell and ensures safety and quality standards are always maintained. Work with supervisor to manage and prioritize staffing assignments to ensure customer demand and the production schedule are met. Use basic problem-solving skills to ensure stable operation of the quality control cell. Report problems or concerns with quality, processes, equipment, materials and labor to Quality management. Work closely with support staff such as Purchasing/Planning, Manufacturing Engineering, Production Supervisor, Materials/Warehouse to resolve issues. Observe, maintain, coordinate and complete standard work. Update production metrics and facilitate regular team communication. Identify and support continuous improvement efforts with Quality management. Sustain and drive lean manufacturing and 5S activities. Follow documented policies and procedures as designated by the company's Quality System. Basic Qualifications Ability to read and interpret documents such as safety rules, engineering drawings, operating and maintenance instructions, Material Standards, Quality Plans, Control Plans and Inspection Test Plans. Experience with Microsoft Office (Word, Excel, Outlook). Ability to communicate effectively through oral and written communications. Ability to analyze and solve problems. Ability to work with others collaboratively. Strong organizational skills. Preferred Experience leading teams or projects strongly desired. Quality Control experience. Lean manufacturing and continual process improvement experience. Educational Requirements High School diploma or equivalent Five years + of related experience and a minimum of two leading teams. LIP Eligible Role This position is eligible for the LIP (Local Incentive Plan) of up to 4%. The pay range takes into account a wide range of factors that are considered in making compensation decisions including, but not limited to, skills; experience and training; licensure and certifications; and other business and organizational needs. The disclosed pay range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At Ingersoll Rand, it is not typical for an individual to be hired at or near the top of the pay range for their role and compensation decisions are dependent on the facts and circumstances of each case. At Ingersoll Rand, we think and act like owners - of our business, our communities, our planet, and our health too. The Ingersoll Rand benefits program provides you with the tools and resources to take accountability for your health so that we can continue to help make life better. Benefits of employment and include; Medical and Prescription drug plans Wellness and Chronic disease management programs Dental, vision, life/AD&D insurance Short- and Long-term disability Health Savings Account Flexible Spending Account Parental Leave Employee Assistance Program Discount Program Employee Stock Grant 401k plan with a company match 3 weeks of paid vacation and 11 paid holidays throughout the calendar year Voluntary benefits include legal, accident, and critical illness protection
    $35k-43k yearly est. 3d ago
  • Laboratory Technician

    TPI Global Solutions 4.6company rating

    Atlanta, GA jobs

    This job posting is for an Assistant to a Microbiologist in a laboratory setting, likely within the Food & Beverage industry (since that's a plus). The role focuses on performing technical microbiological and analytical procedures during the late afternoon/evening shift (1:30 PM - 10:00 PM). Schedule & Compensation: Shift: 1:30 PM - 10:00 PM, Monday - Friday. Core Responsibilities & Focus: The primary duties are centered on Microbiology and Environmental Monitoring: Micro Plating: Preparing and testing samples for bacteria, yeast, and mold. Sample Collection: Performing environmental monitoring (e.g., air, surfaces), swabbing manufacturing lines, and collecting and testing treated water and CIP (Clean-in-Place) water. Analytical Testing (Secondary): Performing chemical and quality control tests on ingredients and finished products, including: Testing ingredient concentration using HPLC (High-Performance Liquid Chromatography). Testing finished product quality (e.g., Brix, pH, color, sensory). Stress testing packaging materials. Required Experience & Qualifications: While a degree is not explicitly required, the candidate must possess strong hands-on experience. Experience: A minimum of 3 years of experience in a lab setting. Background: Strong science background is necessary. Industry: Experience in the Food & Beverage Industry is a PLUS. Skills: Knowledge of complex laboratory techniques, equipment, and terminology; ability to create and analyze statistical data. Physical: Must be able to lift 20 lbs. Equipment: Must have their own safety shoes and glasses. General Lab Support Duties: The role also includes typical laboratory support functions: Conferring with senior personnel regarding procedures and recommending modifications. Conducting literature reviews for research information. Procuring and ordering supplies/materials. Analyzing data and preparing summary reports.
    $28k-38k yearly est. 4d ago
  • Laboratory Technician

    Patterns LLC 4.1company rating

    Pooler, GA jobs

    🚀 Now Hiring: Quality Lab Technician - Pooler, GA (Near Savannah) 🔒 Client Site: Confidential We are seeking an experienced Quality Lab Technician with strong expertise in Faro Arm measurement systems and precision inspection. This role plays a key part in ensuring product accuracy, engineering compliance, and continuous improvement. Key Responsibilities: ✔ Perform dimensional inspections using Faro Arm & precision tools ✔ Interpret technical drawings, engineering specs & GD&T ✔ Verify parts and assemblies to internal and customer standards ✔ Maintain accurate inspection records and documentation ✔ Work with engineering & production teams to resolve discrepancies ✔ Support continuous improvement and root cause analysis ✔ Maintain equipment calibration and a clean lab environment Qualifications: 🔹 Hands-on experience with Faro Arm or portable CMM systems 🔹 Strong GD&T and metric measurement knowledge 🔹 Ability to read and interpret technical drawings 🔹 Proficiency with CAM2 or similar measurement software 🔹 High attention to detail and problem-solving ability Preferred: • Experience in aerospace, automotive, or precision manufacturing • Familiarity with ISO 9001 or quality management systems 📩 Actively collecting resumes - apply ASAP! If you're detail-driven and passionate about precision measurement, I'd love to connect. Thanks & Regards, Tarun Ezava | Lead Talent Acquisition Executive 📱 Mobile: ************ 📧 E-Mail: ****************************** #QualityLabTechnician #QualityTech #FaroArm #CMM #ManufacturingJobs #EngineeringJobs #SavannahJobs #PoolerGA #QualityControl #QualityInspection #GDandT #HiringNow #STEMJobs #PrecisionManufacturing #JobSearch #Careers
    $27k-39k yearly est. 3d ago
  • Quality Technician- 2nd Shift

    Leahy-Ifp 4.0company rating

    Minden, NV jobs

    Job Details Minden, NVDescription Continuum Packing Solutions LLC firmly believes that our employees are the heart of our success. This position description is designed to outline primary duties and qualifications, but not limit one to specified duties, to ensure individual and group success. Job Summary: Under the supervision of the Quality Supervisor, this position is responsible for implementing techniques, processes, and procedures at the plant level to ensure continuous production of products consistent with established standards. Responsible for adhering to Standard Operating Procedures and Good Manufacturing Practices, to ensure the production of safe quality products. Essential Duties and Responsibilities: Practice, teach and enforce the Standard Operating Procedures (SOPs) and Good Manufacturing Practices (GMPs) established for Quality Practice and enforce all Safety policies and procedures Monitor and verify accuracy of product, product packaging, product labeling and product identification/markings Support team member safety by promoting safe work practices, monitoring compliance with policies, and minimizing physical hazards to promote an overall safe work environment Adhere to, teach, and monitor quality programs Ensure process controls are met; all documentation is accurate and bring about corrective action as needed Assist in external audits and documentation Using quality SOPs inspect all raw materials for accuracy, including juice tanker inspections which require safely climbing a tanker ladder Ensure all paperwork is complete and accurate Help resolve quality issues on the production floor Comply with all company policies, practices, and procedures Participate in proactive team efforts to achieve departmental and company goals Provide leadership to others through example and sharing of knowledge/skill Learn, practice, and adhere to all Safety policies & procedures, Standard Operating Procedures (SOPs) and Good Manufacturing Practices (GMPs) established for CPS Learn, practice, and adhere to all Quality policies and procedures including Safe Quality Food (SQF), Hazard Analysis and Critical Control Points (HACCP) and Hazard Analysis and Critical Quality Points (HACQP). Perform other duties as assigned Qualifications Education and Skills: Read, write, speak, and comprehend English Comprehend basic math: addition, subtraction, multiplication, division, weights and measures, and efficient use of a calculator Basic computer and data entry skills Possess mechanical aptitude with the ability to assemble, troubleshoot and perform minor repairs on manufacturing equipment. Ability to communicate both written and orally within the organization Ability to give positive suggestions to improve operations in the work center Team Oriented - being helpful, respectful, approachable, building strong working relationships and a positive work environment, is responsible, honest, loyal, interacting with others tactfully, resolving conflicts appropriately, and adapting to change Ability to manage time efficiently Ability to work well under changing demands Follow verbal and written instructions Must have good work ethics, be highly motivated, and be a hands-on problem solver Ability to detect, recognize, and judge discrepancies Requires accuracy, reliability, and attention to quality Successfully completes and attains passing score of the Blender Lead Test High school diploma or GED, and 2 years work experience in a manufacturing environment Physical Demands: Vision, hearing, and speaking to meet performance standards Climb ladder up to 10 feet off the ground using safety equipment provided Ability to stand and/or walk for long periods, reach, push, pull, lift, climb, bend, stoop, squat, and use manual dexterity to work with the following tools: blending machines, scales, pallet jacks, drum dollies, mops, brooms, portable stairs, hoses, forklifts etc. Ability to safely lift 50 pounds on a frequent basis and move heavier weights using proper equipment and/or team lifting techniques Work Environment: Requires ability to work in an environment that may contain fumes, dust, odors, moderate level noise, and temperature and ventilation variations while wearing any appropriate safety and/or protective clean room apparel required (e.g.: safety glasses, gloves, hair net, face mask or respirator, and uniforms)
    $29k-41k yearly est. 60d+ ago
  • QA Technician

    Niagara Water 4.5company rating

    Denver, CO jobs

    At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. QA TechnicianThe QA Technician is responsible for upholding all corporate and plant-specific Food Safety, Quality, and Laboratory programs to ensure the production of safe, high-quality products. Reporting directly to the QA Manager, the QA Technician supports daily manufacturing operations by conducting testing, maintaining records, troubleshooting activities, and continuously improving food safety and quality systems within the facility. Typical Compensation Range Pay Rate Type: Hourly$23.52 - $31.16 / Hourly Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time Paid parental and caregiver leaves Medical, including virtual care options Dental Vision 401(k) with company match Health Savings Account with company match Flexible Spending Accounts Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. Tuition reimbursement, college savings plan and scholarship opportunities And more! *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.
    $23.5-31.2 hourly Auto-Apply 30d ago
  • Quality Control Technician Lead (Weekend Day Shift)

    Fox Factory 4.5company rating

    Gainesville, GA jobs

    What We Do FOX Factory designs, engineers, manufactures and markets performance-defining products and systems for customers worldwide. Our premium brand, performance-defining products and systems are used primarily on bicycles, side-by-side vehicles, on-road vehicles with and without off-road capabilities, off-road vehicles and trucks, all-terrain vehicles, snowmobiles, specialty vehicles and applications, motorcycles, and commercial trucks. Some of our products are specifically designed for and marketed to a variety of leading cycling and powered vehicle original equipment manufacturers ("OEMs"), while others are distributed to consumers through a global dealer and distribution network. Fox Factory Holding Corp. is the holding company of FOX Factory, Inc. and is publicly traded (FOXF) on Nasdaq. Why you should join us Not only do we provide competitive wages, you will also have access to great benefits and employee discounts. But more importantly, it's a fun environment where we truly enjoy working as a team and bringing great products to our customers! If this sounds like something you would love to do, and a place you want to be a part of, get in touch with us by submitting your application. We look forward to hearing from you! Position Summary: Lead and motivate the performance of key quality teams in support of manufacturing. Drive improvements for quality control processes and procedures. Position Responsibilities: Gives direction and improvement recommendations for quality processes. Ensures compliance with quality control standards. Monitors quality processes. May conduct quality training programs for technicians, inspectors and/or for the production line. Mentors quality and line staff and facilitates problem solving. Maintains standard quality practices across all processes. Records data, makes computations, analyzes results, and writes reports. Specific Knowledge, Skills or Abilities Required: Ability to work with cross-functional teams Strong leadership ability Strong manufacturing knowledge (5S, Lean Manufacturing, technical drawing understanding) Familiarity with MS Office, Excel, and Outlook Position Qualifications: Education: HS Graduate, AA degree in a technical discipline or equivalent experience Experience: 5+ years prior quality control experience required, preferably in manufacturing environment People leadership experience desired, but not required Work Environment and Physical Requirements: Production/Manufacturing environment Lifts up to 50 lbs. on a regular basis Requires walking, standing, bending and lifting for long periods of time Vision abilities required to validate and enter data on computer Disclaimer : This list does not represent all physical demands. Descriptions are representative of those that must be met by employee to successfully perform the essential functions of the job. Reasonable accommodation may be provided to enable individuals with disabilities to perform the jobs' essential functions. Note: FOX provides equal employment opportunities for all employees and applicants for employment without regard to race, color, ancestry, national origin, gender, gender identity, sexual orientation, marital status, religion, age, physical disability (including HIV and AIDS), mental disability, results of genetic testing, or service in the military, or any other characteristic protected by the laws or regulations of any jurisdiction in which we operate. We base all employment decisions -including recruitment, selection, training, compensation, benefits, discipline, promotions, transfers, layoffs, terminations and social/recreational programs - on merit and the principles of equal employment opportunity. Fox offers an excellent compensation package and wide-ranging opportunities for professional development. Medical, Dental, Vision, Health Spending and Dependent Care Savings Accounts, Disability and Life Insurance benefit programs are available, as is a 401k plan with employer matching. Eligibility for all benefit programs is defined by the applicable plan document or employee handbook.
    $85k-125k yearly est. Auto-Apply 48d ago
  • Quality Technician

    Niagara Water 4.5company rating

    Ontario, CA jobs

    At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Quality TechnicianResponsible for executing corporate and plant specific Food Safety, Quality and Laboratory requirements. The QA Technician reports to QA Manager. In the absence of the Quality Assurance Technician, the QA Manager or designate will assume the job duties. Essential Functions Ensure all parameters of food safety and quality are being adhered to and maintained throughout the facility. Assist with batching chemicals/ingredients for production. Calibrate lab and line equipment for accurate results. Collect in-process and finished product samples. Conduct standardized qualitative and quantitative testing to ensure it meets specifications. Perform aseptic testing for microbial contamination. Follow protocols for documenting testing results. Recognize deficiencies and initiate proper follow-up. Identify and isolate product that does not meet standards. Aid in troubleshooting deficiencies and non-conformances. Review food safety and quality records. Actively participate in plant teams (HACCP, Safety, etc.) Conduct other duties as assigned by management. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 0 Years - Experience in Field or similar manufacturing environment 0 Years - Experience in Position 0 Years - Experience managing people/projects *experience may include a combination of work experience and education Must read, write and communicate in English. Must be able to work 12 hour shift (days or nights) on a rotating schedule Must follow GMP Policy - wear company issued shirt, hat, safety glasses, earplugs and hairnet in production areas. Able to lift up to 50 lbs. Able to work under pressure in a very fast paced environment Preferred Qualifications: 2 Years- Experience in Field or similar manufacturing environment 2 Years - Experience working in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: High School Diploma Preferred: Associate's Degree Certification/License: Required: N/A Preferred: HACCP Foreign Language Required: Full Professional Proficiency Preferred: None Required Typical Compensation Range Pay Rate Type: Hourly$23.52 - $31.16 / Hourly Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time Paid parental and caregiver leaves Medical, including virtual care options Dental Vision 401(k) with company match Health Savings Account with company match Flexible Spending Accounts Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. Tuition reimbursement, college savings plan and scholarship opportunities And more! *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.
    $23.5-31.2 hourly Auto-Apply 4d ago
  • Technician, Quality

    Kraton Performance Polymers Inc. 4.5company rating

    Savannah, GA jobs

    Make a +Difference at Kraton! At Kraton, we make a Positive Difference, and we are looking for individuals who are also looking to make a difference in their jobs, for our customers and to the world. We are looking to hire a key member of our Quality Lab team at our Savannah location. Key Responsibilities * Responsible for analysis on in-process samples from the plant * Responsible for troubleshooting/calibrating all equipment in the QC Lab. * Responsible for water analysis from the plant. * Prepare certificate of analysis (COA) for shipments. * Approve raw material by the use of Purchasing Approval System in Lotus Notes. * Assist with the coordination of sample analyses from outside sources. * Meet all OTIF (On Time/In Full) objectives within your control. * Communicate results thoroughly within the Quality Department and with other departments. * Conduct routine final shipment analyses. * Communicate with Operations on quality matters. * Work with Plant Chemists and Quality Manager to track, report, & improve key quality indicators for laboratory compliance and efficiency. * Report instrumentation issues and remove faulty instruments from service until a disposition can be made on the instrument. * Participate in the internal auditing process and Gage R&R studies to identify training opportunities. * Interact with the plant's EHS Department to ensure the proper disposal of chemical waste and general compliance with applicable_ policies. Required Skills * 0 to 2 years of relevant work experience * Prior work experience in a QC Laboratory; preference will be given to individuals with work experience in a chemical manufacturing setting. Education, Certifications & Licenses * High School diploma with the equivalent combination of advanced education and work experience required. * An accredited Bachelor's degree in Chemistry, Chemical Engineering, Biology preferred. * ------------------------------------------------- The statements above are intended to describe the general nature and level of work performed by employees assigned to this classification. Statements are not intended to be construed as an exhaustive list of all duties, responsibilities and skills required for this position. Kraton's internal talent acquisition team manages our recruiting efforts and from time to time works with pre-selected/pre-approved external staffing agencies. We do NOT accept unsolicited resumes or candidate referrals from recruiters and/or agencies who are not pre-selected/pre-approved. Kraton is proud to be an Equal Opportunity Employer.
    $33k-42k yearly est. 24d ago
  • Quality Technician

    Professional Plastics 3.9company rating

    Austell, GA jobs

    Job Description Professional Plastics is a leading distributor of high-performance engineering plastic shapes. We provide the widest range of engineering plastics, composites & technical ceramics in the marketplace. Established in 1984, Professional Plastics has grown to 22 locations across the USA, Singapore & Taiwan. We are a family-owned and operated business that values hard work, integrity and ethics. Professional Plastics is currently offering great career opportunities. We are interested in hiring motivated professionals who share our core values and desire to be part of a dynamic team. Professional Plastics is an equal opportunity employer and offers competitive pay and benefits. Position Summary: The Quality Technician ensures that parts produced meet all customer quality expectations, ensures that documented practices meet customer requirements and the true interpretation of Quality Management System standards. Duties performed support these goals. Essential Duties and Responsibilities: Include the following, as well as other duties that may be assigned. Establish an understanding of customer product requirements. Perform testing and inspection on incoming materials from vendors and outgoing product shipping to customers. Read and interpret blueprints and drawings with an understanding of GD&T. Interpret specifications and other technical industry and customer documentation. Maintain calibration records for measuring devices and equipment. Perform process capability studies, including obtaining and analyzing data using statistical methods. Take quick action when a nonconformance is detected. Utilize ERP system to perform effective containment activities. Perform root cause analysis and develop permanent corrective actions. Access customer portals for documentation and data submittals. Support Quality Control incoming, in-process, and final inspection needs. Ensure all internal and customer requirements are met prior to product release. Support certification and customer audits. Perform Internal Audits. Establish collaborative working relationships with customers, vendors, and all internal departments. Multitask - manage several projects at once. Present data and other information in an organized and appropriate manner Minimum Qualifications: To perform the job successfully, the individual must have the following minimum qualifications: Knowledge, Skills, and Abilities: Knowledge of Geometric Dimensioning & Tolerancing (GD&T) Ability to read and interpret drawing/blueprints/schematics Experience conducting and/or preparing for audits Understanding of the AS9100 or ISO9001 standard Developing and maintaining effective customer relationships Proficiency in standard office and database programs/equipment Education and Experience: Required and preferred educational and experiential qualifications Associate degree in Engineering/Manufacturing Technology or other relevant technical field 3 years QA or QC experience in a manufacturing environment Metrology experience Experience interacting with customers Benefits: DailyPay Earned Wage Access Medical Dental Vision Flexible Spending Account 401K Plan with Company Match Basic Life and AD&D Voluntary Life Insurance Long Term Disability Employee Assistance Program Paid Time Off (PTO) Paid Holidays Morgan Stanley Financial Advice Short Term Disability Accident, Critical Illness and Hospital Indemnity MetLife Legal Plan Norton LifeLock United Pet Care Discount Program LifeMart Employee Discounts Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. While performing the duties of this position, the employee is regularly required to stand, walk, reach with hands or arms and talk or hear. The employee is frequently required to type, use telephonic devices, and view data on computer screens. The employee is occasionally required to use hands or fingers, handle or feel objects, tools, or controls. The employee is occasionally required to sit and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is frequently exposed to office equipment and moving mechanical parts. The noise level in the work environment is usually moderate, however certain areas of the work environment may have elevated noise levels and require hearing protection. Job Type: Full-time Equal Opportunity Employer: Disability/Veteran
    $29k-35k yearly est. 27d ago
  • Quality Technician

    Professional Plastics 3.9company rating

    Austell, GA jobs

    Professional Plastics is a leading distributor of high-performance engineering plastic shapes. We provide the widest range of engineering plastics, composites & technical ceramics in the marketplace. Established in 1984, Professional Plastics has grown to 22 locations across the USA, Singapore & Taiwan. We are a family-owned and operated business that values hard work, integrity and ethics. Professional Plastics is currently offering great career opportunities. We are interested in hiring motivated professionals who share our core values and desire to be part of a dynamic team. Professional Plastics is an equal opportunity employer and offers competitive pay and benefits. Position Summary: The Quality Technician ensures that parts produced meet all customer quality expectations, ensures that documented practices meet customer requirements and the true interpretation of Quality Management System standards. Duties performed support these goals. Essential Duties and Responsibilities: Include the following, as well as other duties that may be assigned. Establish an understanding of customer product requirements. Perform testing and inspection on incoming materials from vendors and outgoing product shipping to customers. Read and interpret blueprints and drawings with an understanding of GD&T. Interpret specifications and other technical industry and customer documentation. Maintain calibration records for measuring devices and equipment. Perform process capability studies, including obtaining and analyzing data using statistical methods. Take quick action when a nonconformance is detected. Utilize ERP system to perform effective containment activities. Perform root cause analysis and develop permanent corrective actions. Access customer portals for documentation and data submittals. Support Quality Control incoming, in-process, and final inspection needs. Ensure all internal and customer requirements are met prior to product release. Support certification and customer audits. Perform Internal Audits. Establish collaborative working relationships with customers, vendors, and all internal departments. Multitask - manage several projects at once. Present data and other information in an organized and appropriate manner Minimum Qualifications: To perform the job successfully, the individual must have the following minimum qualifications: Knowledge, Skills, and Abilities: Knowledge of Geometric Dimensioning & Tolerancing (GD&T) Ability to read and interpret drawing/blueprints/schematics Experience conducting and/or preparing for audits Understanding of the AS9100 or ISO9001 standard Developing and maintaining effective customer relationships Proficiency in standard office and database programs/equipment Education and Experience: Required and preferred educational and experiential qualifications Associate degree in Engineering/Manufacturing Technology or other relevant technical field 3 years QA or QC experience in a manufacturing environment Metrology experience Experience interacting with customers Benefits: DailyPay Earned Wage Access Medical Dental Vision Flexible Spending Account 401K Plan with Company Match Basic Life and AD&D Voluntary Life Insurance Long Term Disability Employee Assistance Program Paid Time Off (PTO) Paid Holidays Morgan Stanley Financial Advice Short Term Disability Accident, Critical Illness and Hospital Indemnity MetLife Legal Plan Norton LifeLock United Pet Care Discount Program LifeMart Employee Discounts Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. While performing the duties of this position, the employee is regularly required to stand, walk, reach with hands or arms and talk or hear. The employee is frequently required to type, use telephonic devices, and view data on computer screens. The employee is occasionally required to use hands or fingers, handle or feel objects, tools, or controls. The employee is occasionally required to sit and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is frequently exposed to office equipment and moving mechanical parts. The noise level in the work environment is usually moderate, however certain areas of the work environment may have elevated noise levels and require hearing protection. Job Type: Full-time Equal Opportunity Employer: Disability/Veteran
    $29k-35k yearly est. 25d ago
  • Chemist Quality Assurance

    Arclin Career 4.2company rating

    Cedartown, GA jobs

    Perform inspections on raw material, production, shipping, and developmental samples using standard methods. Inspections via physical test and Certificate of Analysis review. Approval of conforming materials to internal and customer requirements. Control non-conforming materials. Recommend any needed adjustments or actions to production based on sample test results, formula guidelines, experience, and other experts as necessary for efficient and timely completion of products meeting customer expectations. Experience and capability to operate a variety of laboratory analytical equipment; including set up, calibration, and maintenance. GC-FID (OpenLab CDS) HPLC (Empower 3) FTIR (Omnic) Flame AAS (Solaar) Auto Titrators (LabX) Viscometers Moisture Analyzers pH Meters Maintain accurate records of all data taken using the LIMS system, batch cards, notebooks, reports, and checklists necessary for the specific type of data being recorded. Capability of using statistical programs to evaluate results. Proficiency in Microsoft Office Suite and Microsoft 365. Ensure accurate and timely delivery of legally binding documents Certificates of Analysis Bills of Lading Collect and maintain samples for inspection, label properly, sort and store for all lots numbers, for required retain period. Participate in continuous improvement activities for laboratory, laboratory/production interactions, and production processes. Including recommending procedure changes, documenting non-conformance incidents, participating in root cause investigations, and actively learning/reviewing analytical test methods and quality protocols. Maintain the laboratory in safe, organized, neat, well stocked, functional condition; including cleaning up work areas, submitting purchase requests for depleted items, prepare replacement stock solutions, maintaining method calibrations, monitoring reagent shelf life, and repairing or notifying others of malfunctioning equipment. Participate in site safety and environmental programs. Perform various clerical duties relating to laboratory responsibilities. Perform laboratory activities as outlined in various ISO and work instruction documents including internal audit responsibilities. Train in and maintain active certification in first-aid techniques. Administer first-aid as needed in site emergencies. Communicate pertinent information to other shifts, staff, and plant personnel on a timely basis. Prepare weekly reports on progress toward yearly goals. Ability to interact and communicate with others effectively, written and oral.
    $52k-67k yearly est. 4d ago
  • Quality Technician

    Carlisle Companies Inc. 4.2company rating

    Cartersville, GA jobs

    Carlisle Weatherproofing Technologies (CWT) is a leading supplier of building envelope solutions that effectively drive energy efficiency and sustainability in commercial and residential applications. We are looking for a Quality Technician working out of our Cartersville Facility located in Cartersville, GA. Job Summary Ability to perform various quality control tests on products to verify that all products meet or exceed minimum requirements. Ability to perform inspection on manufacturing lines to ensure quality products are produced and shipped out to the customer. Standard work week 40 hours a week with occasional overtime, no travel required. Duties and Responsibilities: * Inspect materials, products, or equipment to detect defects or malfunctions. * Perform quality assurance tests and visual inspections of raw materials, intermediary products, and finished goods per work instructions. * Use dimensional measuring devices to ensure product meets job order specifications, or equipment to detect defects or malfunctions. * Enter all test results into the Formulator database and manage documents. * Communicate quality issues with affected departs. * Enforce safety and sanitation regulations. * Participate in audits on a regular or as needed basis. * Determine root causes regarding quality issues, identify and implement appropriate corrective actions. * Assist external and internal quality audits. * Assist production teams with process changes, quality plan documentation, and test requirement updates. * Assist customer service and sales teams to respond to customer questions in relation to product capability and limitations. * Help to drive continuous quality improvement and scrap reduction. * Other duties as assigned. Required Knowledge/Skills/Abilities: * Must demonstrate safe working practices and possess great attention to detail. * Ability to follow CWT's policies, procedures, and processes. * Good communication, organization, and time management skills. * Basic computer, mathematics, and problem-solving skills; ability to use a calculator. * Ability to use measuring devices (gauges, tapes, rulers, calipers). * Team player able to follow instructions from both management and peers. * Ability to learn and operate new equipment. * Ability and willingness to learn how and why. * Ability to work independently Education and Experience: * Required: * High School diploma or GED required. * Six (6) months to one (1) year related experience preferred. Working Conditions: * This position conducts its work in a manufacturing environment with exposure to some odors. * Use of the following equipment in the course of the job duties: * Viscometers * Thermometers * Power Tools * Scales * Tape Measure * Titrators * Forklift * Radio * Computer * Mixers * Square/Calipers * Spray Machine * Bandsaw * Respirator with spray suit Physical Requirements: OCCASIONALLY FREQUENTLY CONTINUOUSLY (0-30%) (31-60%) (61-100%) LIFTING OR CARRYING * 1-10 LBS X * 11-20 LBS X * 21-40 LBS X * 41-50 LBS X * 51 OR MORE LBS PUSHING OR PULLING: * 1-40 LBS X * 41-50 LBS X * 51 OR MORE LBS X BENDING OR STOOPING X REACHING ABOVE SHOULDER LEVEL X DRIVING AUTOMATIC EQUIP. VEHICLES X OPERATE MACHINERY OR POWER TOOLS X CLIMBING (LADDERS, STAIRS, ETC.) X WALKING X STANDING X SITTING X WORKING IN EXTREME TEMPERATURES X REPETATIVE MOTION INCLUDING BUT NOT LIMITED TO: WRISTS, HANDS AND/OR FINGERS) X VISION X HEARING X DEXTERITY X HAND EYE COORDINATION X Personal Protective Equipment (PPE) Used: * Eye and hearing protection is required at all times on the production floor. * Safety toe shoes (steel/composite) * Hi-Vis Vests or Uniforms * Spray suit * Gloves * Other PPE as defined by management within assigned department.
    $27k-36k yearly est. 40d ago
  • Technician, Quality

    Habasit America Inc. 4.3company rating

    Suwanee, GA jobs

    Job Description Who is Habasit? Habasit is the global leader in the manufacturing of lightweight conveyor belting. Our slogan “Solutions in Motion” defines us; we are a provider of world class power-transmission and conveying solutions. At Habasit, we understand that a global leader is only as good as the people who represent it, and we are always searching for the right people to keep us in motion. We are looking for ambitious individuals, leaders, and students who are ready to help move us forward. If you have a can-do attitude and want to join a world-class organization, read on and apply today! SUMMARY The Quality Technician is primarily responsible for managing and driving root cause and corrective actions within the manufacturing & business environment. This role ensures that product and process nonconformities are properly investigated, documented, and resolved in compliance with company procedures. The Quality Technician partners with cross-functional teams to identify root causes, implement effective solutions, and monitor results to prevent recurrence. This role is ideal for someone who thrives on problem-solving, compliance, and driving accountability across teams. Things you should know about Habasit's opportunities: Direct hire opportunity Eligible for bonuses and incentives $500 bonus after 90 days of employment $500 additional bonus after 180 days of employment $1000 additional bonus after 365 days of employment $750 referral bonus after 6 months Basic Qualifications Must be 18 years of age Must be cleared on any background screening English literacy Ability to use a calculator and a tape measure. Computer skills a plus Must be able to lift up to 40 pounds. Must be able to stand, walk, sit; use hands and fingers to handle or feel; and reach with hands and arms. Why should you join our team? Our amazing environment keeps safety as its top priority! You can enjoy a collaborative atmosphere in a clean and climate-controlled facility. Our core values are how we thrive, and you will get to work with people who share them: Organizational Pride, Highest Ethical Standards, Quality You Can Trust, Collaboration, Entrepreneurship, and Continuous Improvement. Our opportunities to advance give any qualified associate the opportunity to move to a higher level job. Our on-the-job training and skills development will ensure your success in your job. If you are interested in becoming a part of a World-Class Team, submit your application today! ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Coordinate and oversee corrective and preventive action activities across manufacturing operations. Track, document, and maintain corrective action records in accordance with company requirements. Ensure timely closure of corrective action tasks and verify effectiveness of solutions. Lead investigations into product or process non-conformances. Facilitate problem-solving sessions using tools such as 5 Whys, Fishbone Diagrams, and FMEA. Collaborate with engineering, production, and quality teams to identify systemic issues. Create or revise work instructions or procedures to support improvement actions. Technical writing ability and knowledge of document & configuration control. Prepare reports and summaries of corrective action status. Support internal and external audits by providing corrective action documentation and objective evidence. Recommend process improvements to reduce defects, scrap, and rework. Provide training and guidance to employees on corrective action and best practices. Monitor trends in non-conformances and proactively address recurring issues. Perform quality system and process audits. Perform product inspections and nonconformance dispositions. Experience with QT9 QMS a plus. All other relevant duties as assigned by supervisor QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Additionally, the Quality Technician must have proven root cause problem-solving experience, attention to detail & documentation accuracy; cross-functional collaboration & analytical thinking with a continuous improvement mindset. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions RESPONSIBILITIES OF THIS POSITION: 3-5 years of experience in manufacturing quality assurance or corrective action coordination. Strong knowledge of CAPA processes, ISO 9001, Lean, and Six Sigma methodologies. Excellent organizational, communication, and facilitation skills. Proficiency in quality tools and software for managing & tracking corrective actions & tasks. Ability to assess adequacy of objective evidence to approve and close corrective actions. Strong knowledge of ISO 9001, Lean Manufacturing, and Six Sigma principles. Excellent leadership, communication, and problem-solving skills. Proficiency in quality tools (SPC, FMEA, control plans, etc.) Working experience with Microsoft programs: MS Word, Power Point, Visio, Excel, Outlook. Strong aptitude for learning software and managing data. Demonstrated people and leadership skills, including conflict resolution, problem solving, and performance management. Excellent organizational skills, attention to detail, and the ability to work with staff from diverse disciplines and backgrounds. Other duties as assigned PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand. The employee frequently is required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk and sit. The employee is occasionally required to stand, stoop and/or kneel. The employee must regularly lift and/or move up to 25 pounds and occasionally lift and/or move up to 60 pounds, with assistance if necessary. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Daily - 8:00AM-5:00PM - Monday through Friday
    $35k-44k yearly est. 24d ago
  • Technician, Quality

    Habasit America Inc. 4.3company rating

    Suwanee, GA jobs

    Who is Habasit? Habasit is the global leader in the manufacturing of lightweight conveyor belting. Our slogan “Solutions in Motion” defines us; we are a provider of world class power-transmission and conveying solutions. At Habasit, we understand that a global leader is only as good as the people who represent it, and we are always searching for the right people to keep us in motion. We are looking for ambitious individuals, leaders, and students who are ready to help move us forward. If you have a can-do attitude and want to join a world-class organization, read on and apply today! SUMMARY The Quality Technician is primarily responsible for managing and driving root cause and corrective actions within the manufacturing & business environment. This role ensures that product and process nonconformities are properly investigated, documented, and resolved in compliance with company procedures. The Quality Technician partners with cross-functional teams to identify root causes, implement effective solutions, and monitor results to prevent recurrence. This role is ideal for someone who thrives on problem-solving, compliance, and driving accountability across teams. Things you should know about Habasit's opportunities: Direct hire opportunity Eligible for bonuses and incentives $500 bonus after 90 days of employment $500 additional bonus after 180 days of employment $1000 additional bonus after 365 days of employment $750 referral bonus after 6 months Basic Qualifications Must be 18 years of age Must be cleared on any background screening English literacy Ability to use a calculator and a tape measure. Computer skills a plus Must be able to lift up to 40 pounds. Must be able to stand, walk, sit; use hands and fingers to handle or feel; and reach with hands and arms. Why should you join our team? Our amazing environment keeps safety as its top priority! You can enjoy a collaborative atmosphere in a clean and climate-controlled facility. Our core values are how we thrive, and you will get to work with people who share them: Organizational Pride, Highest Ethical Standards, Quality You Can Trust, Collaboration, Entrepreneurship, and Continuous Improvement. Our opportunities to advance give any qualified associate the opportunity to move to a higher level job. Our on-the-job training and skills development will ensure your success in your job. If you are interested in becoming a part of a World-Class Team, submit your application today! ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Coordinate and oversee corrective and preventive action activities across manufacturing operations. Track, document, and maintain corrective action records in accordance with company requirements. Ensure timely closure of corrective action tasks and verify effectiveness of solutions. Lead investigations into product or process non-conformances. Facilitate problem-solving sessions using tools such as 5 Whys, Fishbone Diagrams, and FMEA. Collaborate with engineering, production, and quality teams to identify systemic issues. Create or revise work instructions or procedures to support improvement actions. Technical writing ability and knowledge of document & configuration control. Prepare reports and summaries of corrective action status. Support internal and external audits by providing corrective action documentation and objective evidence. Recommend process improvements to reduce defects, scrap, and rework. Provide training and guidance to employees on corrective action and best practices. Monitor trends in non-conformances and proactively address recurring issues. Perform quality system and process audits. Perform product inspections and nonconformance dispositions. Experience with QT9 QMS a plus. All other relevant duties as assigned by supervisor QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Additionally, the Quality Technician must have proven root cause problem-solving experience, attention to detail & documentation accuracy; cross-functional collaboration & analytical thinking with a continuous improvement mindset. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions RESPONSIBILITIES OF THIS POSITION: 3-5 years of experience in manufacturing quality assurance or corrective action coordination. Strong knowledge of CAPA processes, ISO 9001, Lean, and Six Sigma methodologies. Excellent organizational, communication, and facilitation skills. Proficiency in quality tools and software for managing & tracking corrective actions & tasks. Ability to assess adequacy of objective evidence to approve and close corrective actions. Strong knowledge of ISO 9001, Lean Manufacturing, and Six Sigma principles. Excellent leadership, communication, and problem-solving skills. Proficiency in quality tools (SPC, FMEA, control plans, etc.) Working experience with Microsoft programs: MS Word, Power Point, Visio, Excel, Outlook. Strong aptitude for learning software and managing data. Demonstrated people and leadership skills, including conflict resolution, problem solving, and performance management. Excellent organizational skills, attention to detail, and the ability to work with staff from diverse disciplines and backgrounds. Other duties as assigned PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand. The employee frequently is required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk and sit. The employee is occasionally required to stand, stoop and/or kneel. The employee must regularly lift and/or move up to 25 pounds and occasionally lift and/or move up to 60 pounds, with assistance if necessary. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.
    $35k-44k yearly est. Auto-Apply 24d ago
  • Quality Technician Swing Shift

    Thrive Life 4.2company rating

    American Fork, UT jobs

    Job Title: Quality Assurance Technician Department: Quality Reports to: QA Supervisor Swing Shift: Monday-Friday 2:00pm-10:30pm. Job Summary: The Quality Assurance (QA) Technician is responsible for ensuring that products meet the company's quality standards and regulatory requirements. This role involves performing inspections, conducting tests, audits and documenting results to ensure the consistent production of high-quality products. The QA Technician works closely with production teams to identify and resolve quality issues and to implement continuous improvement initiatives. ESSENTIAL DUTIES & RESPONSIBILITIES INCLUDE: To perform this job successfully, an individual must be able to perform each essential functions/duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties/functions may be added or assigned. * Conduct Quality Assurance audits of production facility assuring company standards are maintained and product integrity is preserved. * Consult with management to resolve quality, production, and efficiency problems. * Function as an information source to various company departments when special and critical quality issues occur. * This role determines overall plant product quality by conducting and evaluating various product tests and tests related to ingredients and packaging. * The QA technician will resolve minor to major quality problems within the facility; evaluate and take corrective action when necessary, regarding product at all levels of product movement; educate and instruct plant personnel in recommended quality control testing, equipment and general sanitation and housekeeping practices while confirming these procedures are maintained. Preparation through submission of evaluation reports is a vital function in the role as well * Provide food safety training and on-the-job training to new personnel as required. * Maintain regular and consistent attendance. * Perform all other related duties as assigned or needed. SAFETY REQUIREMENTS INCLUDE: * Comply with the Environmental Health Safety & Security (EHS&S) policies and applicable regulatory and company EHS&S rules and requirements. * Report to supervision conditions or practices that are either unsafe or that may adversely impact the environment, to ensure prompt resolution of potential hazards. * Attend scheduled EHS&S training program. * Actively support the organization's efforts to meet or exceed EHS&S goals and plans. * Recommend improved EHS&S practices. * Practices safe work habits and follows general safety procedures such as proper lifting and bending, ergonomics, proper use of equipment and use of personal protection equipment (PPE). * Adheres to and ensures lockout procedures are followed any time the equipment is being cleaned or maintained. PRODUCT SAFETY AND QUALITY * Place high priority on food safety, quality, and sanitation by understanding and executing Thrive Freeze Dry's food safety, quality, and sanitation policies and procedures. * Hold self and others accountable to Thrive Freeze Dry food safety, quality, & sanitation guidelines and policies by communicating any food safety or quality incident, observation, or opportunity to your leadership team or teammates. * Adheres to and ensures Product Safety and Quality standards are followed. * Adheres to and ensures GMP's regarding food contact packaging as it pertains to the employee. * Adheres to and ensures Thrives food safety, product defense standards and quality objectives complies with all SQF system requirements. MINIMUM REQUIREMENTS (include education, experience, special skills, licenses and/or certifications required.) The list below represents the knowledge, skill, and/or ability required to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * 0-2+ years' experience in the field, laboratory, or production facility quality control. * Demonstrated ability to communicate orally or in written form effectively with co-workers, departments, and carriers. * Place high priority on food safety, quality, and sanitation by understanding and executing Thrive Food's food safety and sanitation policies and procedures. * Hold self and others accountable to Thrive Foods food safety & sanitation guidelines and policies by communicating any food safety incident, observation, or opportunity to your leadership team or teammates. PHYSICAL REQUIREMENTS - Must be able to perform the following functions with or without accommodations: * Occasional lifting, carrying, pushing, and/or pulling; occasional stooping, kneeling, crouching, and/or crawling; and frequent fine finger dexterity. * Ability to stand, walk or sit for extended periods and perform repetitive tasks. * The job is performed under occasional temperature variations and in a food manufacturing production environment. * Unrestricted visual and audio abilities are required for the safety of all employees. * The ability to lift to 50 lbs. is required. The job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice. Thrive Freeze Dry. is an EO employer - M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.
    $27k-33k yearly est. 4d ago
  • Quality Technician II

    Trelleborg Sealing Solutions 4.6company rating

    Louisville, CO jobs

    The Quality Technician II is responsible for maintaining the Quality Management System by following the required procedures and ensuring customer requirements are identified and met. Essential Duties & Responsibilities Reads part drawings and assesses dimensions. Supports inspection equipment operation within the production cell as required, including Coordinate Measurement Machine. Initiates Management Review Board and performs actions as assigned. Performs Final Inspection - Ensures required documentation from all inspections are complete and all functions of the manufacturing process have been verified as complete. Ensures correct product identification and traceability of materials is maintained throughout the operations process. Initiates Quality-related turnbacks and communicates with production. Creates basic and intermediate certifications as required by the Work Order, including FAIRs. Performs specialised inspection, including visual and dimensional checks. Assists with Internal Auditing as required. Assists with measurement tool calibration as required. Creates basic CMM programs in the production cell to aid in inspection. Participates in small projects or other tasks as required. Education and Experience This position requires a High School Diploma or GED equivalent. This position should have 2-3 years of experience in a quality role in a manufacturing environment. Experience with QMS compliance software (e.g., Qualtrax) and enterprise resource planning system (e.g., JD Edwards or SAP) is required. Knowledge, Skills, and Abilities Must have the ability to multitask in a fast-paced environment. Excellent interpersonal skills and ability to effectively communicate with all levels of the organization both written and verbal in English. Ability to work in a team environment. Must have a high level of attention to detail and excellent problem-solving skills. Must be proficient with Microsoft Office, specifically Excel and Outlook, and general computer skills. High knowledge of materials and material requirements as they relate to customer orders. High knowledge of purchase order requirements. Ability to read blueprints and product drawings and interpret requirements as needed. Must be able to operate various inspection tools such as dial calipers, micrometers, optical comparator, height gages, pin & plug gages, pi tape and microscopes. Must have excellent math aptitude. Work Environment/Physical Demands/Equipment Used This position is located in a manufacturing facility which requires prolonged sitting, standing, walking, squatting, twisting, and bending. This position will spend about 90% of their time on the production floor where heavy machinery is present and loud sounds exist. Requires manual dexterity for typing and considerable time at a computer. Health and Safety - PPE Requirements Safety Glasses to be worn at all times when on the production floor Safety Shoes to be worn at all times when on the production floor Must wear appropriate PPE for all work activities performed; varies based work
    $33k-41k yearly est. 45d ago
  • Quality Tech

    Masterbrand Cabinets 4.6company rating

    North Las Vegas, NV jobs

    For nearly 70 years, MasterBrand has been a leader in shaping environments where people gather, enriching lives, and creating lasting memories. As the number one North American residential cabinet business, we take pride in our stylish products, expansive network, and dedicated associates. Join us as an intern and embark on a journey where you'll face authentic business challenges, craft scalable solutions, and make a real impact. Job Description The Quality Tech - Supplier Quality position is the lead point-of-contact between the DA operations team and our vendors/ suppliers, and is responsible for overall performance and improvements in supplier quality and material quality. This position works within the Distributive Assembly (DA) and Riverside Quality System, and uses root cause analysis techniques, and trend/ statistical analysis to assist in the continual improvement of the DA's manufacturing processes. This individual will also assist in solving problems, controlling variables, and providing candid & accurate feedback that are critical to quality. They will be expected to lead continuous improvement activities and teams focused on improving material quality within the DA. Organizational Relationship: This position will report to the Quality Manager as a member of the Continuous Improvement and Quality Department. Accountabilities: Request, coordinate and track through completion vendor corrective actions Develop new metrics and processes to improve material quality (for example: First Pass Yield) Able to access and interpret technical drawings and blueprints Able to complete and publish End-of-Month Vendor Scrap Reports Audit incoming and in-process pallets for non-conforming material Audit current processes for identification of defects in material goods and process execution Coordinate processing of non-conforming material into quarantine receiving “red zone” and/or vendor scrap area Maintain accountability over quarantined material and expedite disposition through vendors Actively participate in Process, Shipping and Out-of-Box Audits and work towards resolution of open items Interacts with Leadership in the identification and resolution of product quality problems Frequently interacts with internal and external customers to resolve quality problems Coordinate return of defective material to vendors with Materials/Supply group Audit and evaluate pallets of non-conforming material and reconcile discrepancies between actual inventory and tally report sheets Capture defect data, analyze, and identify/communicate trends with recommended countermeasures for resolution. Coach employees on proper processing of “scrap” materials and with proper repair techniques Periodically review specifications and Standard Operating Sheets (SOS) etc. for accuracy and revisions Support Riverside DA employees and Leadership as needed to interpret specifications and solve problems Assist with creating quality standards and visual aids, and training associates on their intended use Participate in Kaizen improvement events, especially those focused on quality Generate, modify, and complete Standard Operating Sheets (SOS) Support Annual Physical Inventories Support root cause investigations in collaboration with Quality Technician. Perform Pick Cart Audits Review and respond to Hour By Hour Supplier related defects being reported. Knowledge, Skills and Experience: Excellent written and oral communications skills Skilled in Microsoft Office required (Word, Excel, and PowerPoint), with expertise in Excel preferred Ability to apply and interpret basic statistical data Must be detail-oriented with the ability to discern colors and see defects from arm's length away Must have the ability to actively initiate, lead, and participate in problem solving activities as they pertain to supplier quality issues Must be able to give candid feedback and report findings of non-compliance to the Riverside Quality System Ability to maintain the professional competence, knowledge, and skill necessary for the satisfactory performance of all assigned responsibilities Able to work under normal supervision and self-pace as required Willing to perform basic 5S (housekeeping/organization) steps and maintain the vendor scrap area and vendor scrap work cell Two years' experience within a manufacturing environment preferred One year of demonstrated exceptional individual performance, and/or one year of quality assurance/control desired Must be willing to hold self and others accountable to safety and quality policies and procedures Physical Requirements Possess manual dexterity to perform detailed cosmetic repairs to cabinet components by hand Individual and team-lifting as appropriate Safely perform stacking and down-stacking of various cabinet components to process and quarantine non-conforming material A combination of bending, reaching, squatting/stooping, standing and walking for up to nine hours per day The ability to operate a manual pallet jack The ability to work safely and wear proper PPE, which includes, but is not limited to: Safety glasses, ear plugs, task-specific gloves, bump cap or hardhat, and steel toed safety shoes The ability to work in a hot and/or dusty environment SHIFTS: 1st shift hours: Monday - Thursday 5:30 AM - 4:00 PM, You will normally work this shift, however may need to work on Fridays based on company needs. BENEFITS Insurance coverage including medical, dental, vision, life insurance, flexible spending accounts, wellness programs, 401K all effective day 1 of employment, plus generous PTO and holidays Associate appreciation/recognition programs Scholarship program for children of employees Other benefits offered are dependent upon plant location, please check with HR for details Qualifications Education: High school diploma or GED equivalent is minimally required Must be a team player with strong written and verbal communication skills Must have the ability to actively initiate lead and participate in problem solving activities Minimum 3 years' experience in a manufacturing setting preferred Additional Information Equal Employment Opportunity MasterBrand Cabinets LLC is an equal-opportunity employer. MasterBrand Cabinets LLC's policy is not to discriminate against any applicant or employee based on race, color, religion, sex, gender identity or expression, national origin, ancestry, age, disability/handicap status, marital status, military status, sexual orientation, genetic history or information, or any other basis protected by applicable federal, state or local laws. MasterBrand Cabinets LLC also prohibits harassment of applicants or employees based on any of these protected categories. It is also MasterBrand Cabinets LLC's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Reasonable Accommodations MasterBrand Cabinets LLC is committed to working with and providing reasonable accommodations to individuals with disabilities. If you have a disability and wish to discuss potential accommodations related to applying for employment, please contact us at [email protected].
    $37k-45k yearly est. 60d+ ago
  • Mechanical & Quality Technician

    Soraa 4.5company rating

    Tustin, CA jobs

    To ensure reliable, high-quality production performance by building, maintaining, and troubleshooting mechanical systems while performing quality inspections, supporting field investigations, and validating product performance in real-world environments. Onsite position with occasional field work- Local Candidates only being considered for this role. No sponsorship offered Key Responsibilities Mechanical / Manufacturing Support * Assemble, install, and maintain mechanical systems, jigs, fixtures, and automated equipment. * Perform preventive and corrective maintenance on production machinery, tooling, and fixtures. * Support engineering with equipment setup, calibration, and functional testing for new product introduction (NPI). * Troubleshoot mechanical issues, including pneumatics, hydraulics, and mechanical drive systems. * Document maintenance activities, parts usage, and equipment reliability metrics in CMMS/MES systems. Quality Inspection & Assurance * Conduct in-process, incoming, and final inspections using calipers, micrometers, CMM, gauges, and/or other metrology tools. * Validate mechanical and cosmetic characteristics against engineering drawings and GD&T requirements. * Support root cause analysis (RCA) and participate in corrective and preventive actions (CAPA). * Maintain documentation such as defect logs, inspection reports, NCRs, and control charts. * Assist with calibration and verification of quality inspection equipment. Quality Field Visits (As Needed) * Travel to customer sites, contract manufacturers, suppliers, or field environments to investigate quality or performance issues. * Perform onsite inspections, failure analysis, and operational assessments under real-world conditions. * Collaborate with customer service, engineering, and quality teams to address field defects or recurring issues. * Capture field data, photos, measurements, and feedback for engineering review and continuous improvement. * Provide hands-on support during field trials, pilot builds, or validation testing. Process Control & Continuous Improvement * Identify opportunities to improve mechanical reliability, process capability, and product quality. * Suggest design-for-manufacturability improvements based on production and field learnings. * Participate in Lean, Kaizen, 5S, and continuous improvement activities. * Assist in creating or updating work instructions, inspection criteria, and equipment setup procedures. Qualifications * Technical degree or certification in Mechanical Engineering Technology, Mechatronics, Industrial Maintenance, or equivalent experience. * 3-7 years in a manufacturing, mechanical, or quality technician role; consumer tech or electronics environment preferred. * Strong mechanical troubleshooting skills with experience in pneumatics, hydraulics, tooling, and fixtures. * Proficient with precision measurement tools (calipers, micrometers, gauges, torque tools, CMM). * Understanding of GD&T, engineering drawings, and mechanical tolerances. * Familiarity with quality systems such as ISO 9001, IATF 16949, or similar. * Ability to travel occasionally for field investigations (5-20%). * Strong communication skills, including documenting findings clearly and accurately. Key Competencies * Mechanical aptitude with a strong quality mindset * Analytical and detail-oriented * Effective communicator in both production and field environments * Root cause problem-solving * Strong teamwork across Quality, Engineering, and Operations * Safety-focused and disciplined in documentation * Adaptable - able to shift between factory, lab, and field needs All qualified applicants will receive equal consideration for employment without regard to race, color, national origin, religion, sex, pregnancy, marital status, sexual orientation, gender identity, age, physical or mental disability, or covered veteran status.
    $39k-52k yearly est. 3d ago

Learn more about Golden State Foods jobs