Gopher Resource jobs

We are seeking an Industrial Electrician to join our team in Eagan. Regular Work Schedule: 6:00am-6:00pm 4 days on/4 days off rotating schedule Training Schedule: 6:00am-2:00pm Monday-Friday for at least 3 weeks Starting Pay: $55.36/hour (increases to $56.86/hour effective 12/1/25) Signing Bonus: $15,000 (paid in two installments: 30 days from hire & 6 months from hire) Additional Perks: weekly paychecks, bonus potential, generous healthcare benefits, matching 401k, PTO, paid breaks, tuition reimbursement, and gym reimbursement. Job Responsibilities: Update and maintain equipment documentation within the CMMS Troubleshoot and repair electrical problems arising in buildings, motors, and machine hook-ups, giving priority to production operations that are down Check sketches, blueprints, layout diagrams, or work orders, and prepare lists of materials needed for project work, ensuring compliance with electrical codes Maintain and update equipment records, schematics, blueprints, and files in an orderly fashion Complete all work in accordance with OSHA and NEC standards and regulations Work closely with Production Managers Work to determine the correct method and sequence of operation, and the selection of materials to be used Replace, repair, or adjust defective or worn electrical system components Repair control systems or other equipment as necessary Promote cleanliness, good order, and neat conditions in the maintenance shop, in the storage of parts and supplies, work area, and around plant premises in general Instruct plant personnel on the repair and calibration of process instrumentation Coordinate and communicate equipment and operation problems with production and engineering Active commitment to all Environmental, Health and Safety (EH&S) regulations Other duties as assigned by management Minimum Requirements: High School Diploma or GED from accredited school Currently valid MN Class A Electrical Journeyworker License OR MN Class A Master Electrician license Previous work experience with high voltage as well as single phase, three phase, and DC motors Previous work experience with industrial maintenance and industrial manufacturing plant environments Additional Requirements: Ability to pass pre-employment tests including background check, drug screen, and physical Ability and willingness to wear full-mask respirator directly against skin (eg clean shaven if applicable) with or without reasonable accommodation Ability and willingness to wear full Personal Protective Equipment (PPE) in designated areas (respirator, hard hat, safety glasses, gloves, boots, and hearing protection) with or without reasonable accommodation Ability and willingness to work in a hot production area in full PPE with or without reasonable accommodation Ability and willingness to move about the plant, including stairs and ladders with or without reasonable accommodation Ability and willingness to lift and/or carry up to 80 pounds with or without reasonable accommodation Gopher Resource is an Equal Opportunity Employer.

Pay Rate: 30-40 per hour Hybrid - Altamonte Springs Contract role to start - 3 months MUST have healthcare experience The Talent Acquisition Specialist is responsible for partnering with assigned hiring managers to forecast staffing needs, develop candidate pipelines, source, market and attract talent to foster the mission of the organization. Formulates strategy to acquire talent to fill requisitions. Using Behavioral Interview techniques, the Talent Acquisition Specialist screens, interviews and selects candidates to proceed through the candidate selection process. Collaborate with hiring managers and selects the top candidates for further on-site visits at the facility level. Extends offers and oversees onboarding activities. Maintains excellent candidate and hiring manager relations. Analyzes productivity metrics against the Service Level Agreements to exceed Top Quartile goals as set by industry benchmarks. PRINCIPAL DUTIES AND JOB RESPONSIBILITIES: • Partners with hiring managers to forecast staffing needs by reviewing regular attrition rates, new business plans and potential retirements. • Develops strategy to acquire talent to assure vacancies are kept to facility specified levels, new and expanding programs are staffed for opening dates, and retirement replacement plans are executed • Uses external scanning tools to understand the market and educate the hiring manager on labor market conditions. • Exudes expertise and articulates the business line and market positions to potential candidates. • Uses an intake process with hiring managers, develops recruitment plan and sets SLA's. • Sources and recruits to develop candidates. Masters preclosing candidates during candidate intake. • Using Behavioral Interviewing techniques, interviews, resumes, credentials reviews and assessments, determines candidates who are a mission fit, meet the minimum knowledge, skills and abilities to be a good fit for the position. • Ensure assessments are completed and reflective of the quality hire expected to meet AdventHealth competencies. • Prepares salary offers and receives approval of the hiring managers. • Prepares and extends the job offer, sign on bonuses, seasonal agreement, relocation agreements and any other incentives. Anticipates counter offers as necessary. • Maintains knowledge of benefit plans, incentives and corporate and facility policies and addresses applicant inquiries. • Maintains accurate and timely documentation of candidate progress in applicant tracking system. • Oversees TA Coordinators to assure interviews are scheduled timely and all onboarding activities are carried out to result in on time candidate start date. KNOWLEDGE AND SKILLS REQUIRED: • Proficient with Applicant tracking systems • Excels with Microsoft Office Suite • Excels in social networking and internet vehicles and tools such as emails, search engines, social media, blogs job boards EDUCATION AND EXPERIENCE REQUIRED: • Bachelor's degree or equivalent experience • Two years of recruiting/sourcing experience EDUCATION AND EXPERIENCE PREFERRED: • Healthcare experience preferred • RPO experience preferred LICENSURE, CERTIFICATION OR REGISTRATION PREFERRED: • Certification in Talent Acquisition through HCI, NAHCR, RACR • HR Certification through HCI or SHRM

Provide a remodeling experience that exceeds the customers' expectations through not only a good functional design and quality finish, but ultimately a well-executed project timeline. The kitchen and bath designer will be trained in generating and interacting with leads coming in via email, phone, referral, or walk-ins. This role is responsible for covering the showroom on rotating days to handle leads, clients, and showroom traffic. Responsible for assessing and interpreting the clients' project needs and developing a preliminary cost evaluation that reflects the clients' budget and design parameters. Site measure and create a design, drawings, details, and specifications for the given project upon customer approval of initial cost evaluation. Coordinate with the support team to establish production schedules and review project scope. Oversee projects from job-start through completion. Job site visits at various points in the project schedule, including final walk through with the client. Collect down payment, progress payments and final payments for each project at pre-determined milestones. This role reports to the owners. Support staff is also provided for helping to complete various tasks throughout each project. QUALIFICATIONS Great attention to detail. Excellent communication skills. Build and maintain positive relationships with homeowners/coworkers/sub-contractors. Strongly motivated and willing to learn / expand knowledge. Excellent organizational skills, problem solving skills, and persistence in follow-up. Proficient in Microsoft Office suite of products, and basic computer skills. Ability to work both independently and in a team environment. Knowledge in the construction and remodeling field with the ability to measure and assess jobsites at all stages of a project. Sound design and sales background. Ability to read and understand floor plans / cabinetry details. Hand drawing skills and knowledge in Chief Architect a bonus.

*Job Description: for Design Engineer II: * *Job Title:* Senior Design Engineer Location: Rochester, MN *Job Summary:* Emcor Enclosures is seeking a Senior Design Engineer to lead complex design initiatives for the rapidly growing AI and defense markets. In this high-impact role, you will take ownership of major custom projects for hyperscale datacenters and defense contractors. You will act as a technical subject matter expert, particularly in the design of OCP (Open Compute Project) compliant racks and heavy-duty seismic enclosures. This position offers the opportunity to not only design but also to guide junior engineers and influence the technical direction of our catalog and custom product lines. *About Emcor Enclosures:* Emcor Enclosures is a leading manufacturer of high-quality electrical enclosures specializing in electrical cabinets and 19" racks for a variety of industries and known for our commitment to innovation and customer satisfaction. We offer a dynamic work environment with a focus on creativity, collaboration, and continuous improvement. *Responsibilities:* * Lead Design: Architect to support and develop complex electrical cabinets and server racks, specifically focusing on OCP ORV3 (Open Rack V3) and high-density liquid cooling integration. Provide technical direction; oversee design reviews to ensure accuracy and manufacturability. * Project Management: Interface directly with key customers and sales teams to translate complex requirements (thermal, seismic, stmctural) into manufacturable solutions. * Technical Analysis: Perform and review advanced FEA (Finite Element Analysis) and thermal load calculations to validate designs before prototyping. * Process Improvement: Drive Design for Manufacturing (DFtvf) initiatives to reduce cost and lead times in sheet metal fabrication. * Standards Compliance: Ensure all designs meet strict industry standards (EIA-310, UL, Telcordia, OCP). *Qualifications:* * Qualifications: * Education: Bachelor's degree in Mechanical Engineering (Master's degree is a plus). * Experience: 5-7 + years of experience in mechanical design, specifically within sheet metal fabrication or enclosure manufacturing. * Specialized Knowledge: Demonstrated understanding of OCP (Open Compute Project) rack architecture and hyperscale datacenter requirements. * Technical Skills: Expert-level proficiency in CREO CAD software. Strong grasp of GD&T and tolerance analysis. * Leadership: Previous experience leading projects or supervising technical staff is preferred. * Benefits: \\Ve offer a competitive salary and benefits package, including health insurance, dental insurance, vision insurance, 401Qc), paid time off, and more. *Benefits:* We offer a competitive salary and benefits package, including health insurance, dental insurance, vision insurance, 401(k), paid time off, and more. Job Type: Full-time Pay: $80,000.00 - $100,000.00 per year Benefits: * 401(k) * 401(k) matching * Dental insurance * Health insurance * Life insurance * Paid time off * Vision insurance Ability to Commute: * Rochester, MN 55901 (Preferred) Willingness to travel: * 25% (Preferred) Work Location: In person

About the Company First Coast Energy, L.L.P. owns and operates Daily's, Mountain Energy, and Shell-branded convenience stores across North Carolina, South Florida, and Northeast Florida. About the Role The BI Developer works closely with our Chief Financial Officer to design, develop, and optimize intelligence solutions that transform enterprise-level data into actionable insights. This position supports the organization by building solutions that align with strategic objectives. Duties are performed at corporate headquarters in Jacksonville, FL. Responsibilities Design, develop, and deploy advanced BI solutions, to include dashboards, reports, and data visualizations supporting executive and operational decision-making. Write complex Structured Query Language (SQL) to extract, transform, and analyze data from databases. Construct and optimize data models that promote efficient querying, reporting, and scalability across large datasets. Collaborate with internal stakeholders and executives to understand reporting needs, define KPIs, and translate analytic requirements into technical specifications. Devise and manage ETL processes to collect data from diverse source systems, clean & standardize into functional format, and load into a central data warehouse. Conduct regular system testing and troubleshoot BI tools. Monitor data quality, integrity, and security across platforms. Implement and enforce data governance, security, and quality standards within BI solutions. Maintain current knowledge of emerging BI tools, cloud platforms, and industry trends, proactively recommending new technologies and methods aligned with business goals. Provide technical guidance, knowledge sharing, and mentorship to junior analysts. Minimum Qualifications BA/BS in Computer Science, Information Systems, Data Analytics, or a related field; equivalent combination of education and experience may be considered. 5+ years of progressive experience in business intelligence development, data analytics, or related fields. Advanced proficiency in BI platforms such as Power BI, Tableau, or Qlik, including custom DAX/MDX development or advanced visualization techniques. Strong expertise in SQL and relational database management, with demonstrated experience handling large and complex datasets. Solid understanding of data warehousing concepts, dimensional modeling, and ETL processes. Experience integrating data from multiple sources, including on-premise and cloud-based systems. Sophisticated communication skills to include effective interface with both technical and non-technical stakeholders. Solid understanding of basic financial principles, including P&L impact and pricing strategies. Must pass a pre-employment background check and drug screen. Preferred Qualifications Master's degree in a related discipline. Prior experience in a BI developer or data architect role. Demonstrated ability to lead BI solution design and independently manage complex projects. Physical & Mental Requirements: Articulate verbal and written communication in English; effectively hear, speak, read, and write in a professional environment. Ability to analyze complex datasets to identify trends, patterns, and opportunities. Sufficient close visual acuity to accurately perform reading and typing functions on standard computer systems. Ability to sit for extended periods of time. Ability to manage time efficiently and execute assignments under minimal supervision. Interpersonal aptitude; must effectively collaborate with cross-functional teams of data analysts, data engineers, and business leaders. Refined organizational skills; ability to adapt in a multi-task, corporate business environment with fluctuating priorities. Ability to drive independently.

Owen Electric has been delivering top-quality electrical construction since 1986, specializing in large commercial, institutional, industrial and mission critical projects. We're a family company built on a culture of safety, craftsmanship, and customer satisfaction. Join a team of driven individuals at one of the fastest-growing electrical contractors in the Southeast-where excellence and growth go hand in hand. Job Summary: We're seeking a seasoned Electrical Superintendent to join our growing team and lead field operations from the ground up. As an Electrical Superintendent, you will play a critical leadership role on large construction sites, managing all aspects of field electrical operations. You'll ensure projects are delivered safely, efficiently, and in alignment with design specifications, schedule, and quality standards. Key Responsibilities: · Lead and manage on-site electrical field crews and subcontractors · Coordinate project schedules, manpower needs, and materials · Ensure all electrical work complies with NEC, safety regulations, and local codes · Work closely with Project Managers, General Contractors, and other trades to maintain project timelines and resolve field issues · Provide daily/weekly progress reports and input for look-ahead schedules · Monitor quality control and perform regular site inspections · Train and mentor journeymen and apprentices to support workforce development Qualifications: · 5+ years of experience as an Electrical Superintendent on large-scale new construction projects · Extensive knowledge of electrical systems, construction drawings, and industry standards · Proven track record managing field crews on commercial, multifamily, school, or federal projects · Strong communication and leadership skills · OSHA 30 Certification Required We also offer a full benefits package that includes: Health Insurance - 4 different plans to choose from Dental/Vision/Life 401K Matching Company vehicle and gas card Performance bonus Paid Time Off and Paid Holidays Employee Referral Program Owen Electric is an Equal Opportunity Employer

What we do… Ceres Global and its subsidiaries add value across agricultural, energy and industrial supply chains through efficient sourcing, storing, transporting and marketing of high-quality agricultural commodities, value-added products and raw materials. Leveraging its network of commodity logistics centers and team of industry experts, Ceres Global connects farmers to customers around the world. Headquartered in Minneapolis, Minnesota, Ceres Global has 12 locations across Saskatchewan, Manitoba, and Minnesota. What we need... The Grain Elevator Production Operator's primary responsibility is work as a member of a team to safely and efficiently unload various types of commodities to and from trucks, rail cars, and buildings within the facility. This position requires consistent outside work, exposure to the elements, and schedule flexibility. Starting pay is $22.50 per hour. The hours for this position are 6am to 2pm, Monday-Friday, and will require overtime and weekend work as necessary during certain parts of the year. Placement within the range is determined by a variety of factors, including but not limited to: knowledge, skills, years & depth of experience, location, and equity with internal employees. In addition to pay, we offer eligible full-time employees and their dependents health, dental, vision, and life insurance. Other full-time employee benefits include 401(k), short term disability, long term disability, paid holidays, and paid time off. What you'd do.... Assist with the unloading and loading of various raw grain commodities Perform housekeeping activities (sweeping, shoveling, cleaning) Assist with other general duties within the facility (general maintenance, landscaping) Operate railcar loading systems and equipment Adhere to company safety policies and watch out for the safety of others Understand and follow operating procedures and policies Ability to perform work safely and productively What you'd need... High School Diploma or GED equivalent Experience in a manufacturing or warehouse environment Valid drivers license and reliable transportation to and from the facility (which is not easily accessible by public transportation) Strong mechanical aptitude to learn operate and maintain: railcar & trans-loading equipment (e.g., hoses, portable conveyors, transfer pumps, portable stair systems, small to medium sized equipment) Fluent in English at a level to be able to communicate with customers and colleagues as well as able to read and understand procedures and policies Willingness to work outside in various weather conditions Basic math skills Computer skills for light data entry Strong communication skills Willing to work flexible hours and weekends as necessary As a part of the pre-employment selection process, candidates are required to submit to and receive satisfactory results from all pre-employment criminal background, and employment verification checks Physical Requirements: Able to repetitively climb up and down railcars/ladders safely, walk up and down steps, and work at heights, sweep, and shovel grain Ability to work outside, including in inclement weather Can carry at least fifty (50) pounds Able to stand and walk for the majority of each shift $1,000 sign on bonus paid out after 3 months of employment** $1,000 retention bonus paid out after 9 months of employment** **Sign on and retention bonuses paid only if employee does not have any written violations The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. #ceresglobal

Our Summer Internship Program is meticulously designed to provide students with an immersive and dynamic experience within our industry, offering a taste of what it's like to be part of our professional team. We strive to simulate a full-time job, enabling our interns to work hands-on with cutting-edge technology, contribute to meaningful projects, build strong relationships with coworkers, and develop strategic problem-solving skills. Our program is highly selective, hosting only a handful of interns each year, ensuring personalized attention and ample opportunities to work closely with AV team members. We are hiring for various roles and locations throughout the US, during the interview process we will be able to discuss specific details regarding team and location. Summary As a Software Engineering Intern, you'll be part of a collaborative, multidisciplinary team working on real-world projects across AV technology portfolio. You'll assist in the design, development, and testing of software solutions for a variety of applications - from ground control systems and user interfaces to data pipelines and simulation tools. This role is ideal for someone who's eager to apply their software development skills in a dynamic, hands-on environment, while learning from experienced engineers and contributing to projects with real impact. Position Responsibilities * Assist in the design, coding, testing, and debugging of software components and systems. * Contribute to the development of tools and applications that support AV robotics and aerospace platforms. * Collaborate with engineers across software, hardware, and systems teams to integrate and test new capabilities. * Participate in code reviews, documentation, and the use of version control and defect tracking tools. * Help develop scripts or automation to improve team workflows and efficiency. * Learn and apply best practices in software development processes, including Agile methodologies. * Support the development of prototypes, simulations, and proof-of-concept demonstrations. * Attend team meetings, contribute ideas, and learn to estimate development effort and timelines. Basic Qualifications (Required Skills & Experience) * Currently pursuing a Bachelor's or Master's degree in Computer Science, Software Engineering, or a related field. * Strong foundational knowledge in programming languages such as Python, C++, or Java. * Familiarity with development tools such as Visual Studio, Git, Eclipse, or similar IDEs. * Experience with data structures, algorithms, and software design principles. * Demonstrated problem-solving and analytical skills. * Ability to work both independently and collaboratively in a team environment. * Effective written and verbal communication skills. Preferred Qualifications & Competencies * Experience with software development on Linux, Windows, or cross-platform environments. * Exposure to web technologies, cloud platforms, or backend services is a plus. * Interest in or exposure to robotics, autonomous systems, or data analytics. * Experience using scripting languages (e.g., Bash, Python) to automate tasks. * Knowledge of Agile development practices and version control (e.g., Git). * Curiosity and willingness to learn new technologies and frameworks. * Ability to take ownership of tasks and contribute to team goals. Physical Demands * Ability to work in an office and R&D lab environment (Constant) * Required to sit, type, and use office equipment for extended periods (Frequent) ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR

JOB TITLE: Facilities Landscape Maintenance Worker Work Hours: Tuesday-Saturday 7:00am-3:30pm Our benefits include: Company-wide annual incentive plan Medical, vision and dental insurance 401(k) plan with a generous 6% company match Company funded Pension Plan On-site wellness/medical facility Company paid Short & Long-Term Disability insurance Health Savings Account with an employer contribution Flexible Spending Accounts Paid time off and paid holidays Wellness program with financial rewards Tuition reimbursement Group life insurance Critical Illness and Accident Insurance LCEC provides reliable, cost-competitive electricity to more than 250,000 members throughout a five-county service territory located in Southwest Florida. We employ approximately 460 skilled employees and are one of more than 900 electric distribution cooperatives located throughout the United States. LCEC has been recognized locally and statewide as an industry leader and continually receives acknowledgment for the work that our employees do in the community along with other civic, environmental and professional honors. Position Summary: This position is responsible for daily grounds/irrigation maintenance, customer yard damage repairs, and assists with facilities tasks when needed. This position may at times be required to be on standby, as scheduled, to work irregular and overtime hours and respond to callouts when needed. Position Responsibilities Ability to perform daily grounds and irrigation maintenance to include: Trimming of shrubs, bushes, and tree branches. Plant trees and shrub fertilization. Repair of irrigation piping; cleaning of irrigation systems. Irrigation sprinkler replacement. Working knowledge of all types of grounds keeping equipment/trimmers, edgers, mowers, sod cutters, and hand tools. Perform customer yard damage repairs as needed to restore grass, mailboxes, fences, etc., plant/flower replacement, and replace landscape materials. Assist in hazardous/non-hazardous oil-spill cleanups and respond to after-hours work needs for emergencies. Operate cars, trucks, backhoe, lawn equipment & dump truck. Responsible for the performance of assigned work in accordance with LCEC standards and practices. Maintain effective working relationships with employees at all levels within LCEC. Ensure smooth operations, productive communications, and effective understanding during all interpersonal contacts. Provide current and accurate information to all requesters, courteously and in a timely manner. Support Storm Restoration efforts when needed. Work in emergency storm situations (i.e. hurricanes) and work long hours (>12 hours per day) for many continuous days/weeks as needed. Perform other related duties as assigned. Education High School Diploma or equivalent. (Required) Experience 2+ Years' experience in all phases of landscape maintenance and repairs, all types of landscape equipment, and irrigation operation/repairs. (Required) 2+ Years' experience in oil spill cleanup and restoration repairs to damaged property. (Preferred) Knowledge, Skills, and Abilities Basic computer skills, including ability to navigate within Windows environment to create, open and close files or applications using a mouse and use email. (Required) Licenses and Certifications Secure and maintain a valid Florida commercial driver's license (CDL, Class B) or must obtain within 90 days of employment. (Required) Physical Demands and Working Environment: The physical demands and working environment characteristics described here must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: Standing Constantly, Walking Frequently, Sitting Rarely, Lifting Occasionally up to 50lbs, Carrying Occasionally, Pushing Occasionally, Pulling Occasionally, Climbing Rarely, Balancing Occasionally, Stooping Frequently, Kneeling Frequently, Crouching Rarely, Crawling Frequently, Reaching Frequently, Handling Constantly, Grasping Constantly, Feeling Constantly, Talking Frequently, Hearing Frequently, Repetitive Motions Constantly, Eye/Hand/Foot Coordination Frequently, Working Environment: Rarely Extreme cold, Frequently Extreme heat, Frequently Humidity, Frequently Wet, Occasionally Noise, Occasionally Hazards, Rarely Temperature Change, Frequently Atmospheric Conditions, Rarely Vibration. STORM DUTY REQUIREMENTS.... Responding to storms may be considered a condition of employment: LCEC provides critical services to our community during an emergency. Employees may be required to participate in the response/recovery activities related to emergencies/disasters to maintain service to our LCEC members. Employees are required to work in their normal job duties or other assigned activities. Proper compensation will be made in accordance with the company's guidelines and procedures. Please note that at the time a candidate is made a job offer, the candidate will be subject to a background check and a drug screening.

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning over 12,000 strong organization as we fuel the world and each other! Summary: This position will repair and maintain pipelines, equipment, and performance of work associated with the operation and maintenance of gas and liquid facilities and pipelines. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Inspect, maintain, and operate facilities including pipelines, valves, filters, pumps, gas compressors, storage tanks, and pump station equipment in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Conduct Damage Prevention activities including pipeline patrols, one-calls, locating and marking pipelines, and inspecting line crossings, excavations, and other activities affecting the pipeline * Maintain working knowledge of regulatory requirements, perform required tasks, and complete associated documentation (OSHA, DOT, EPA, etc.) * Plan, organize, and prioritize assigned responsibilities and coordinate work with employees and contractors * Coordinate and communicate with outside parties including landowners, public agencies, contractors, utilities, and other pipeline operators * Actively participate and provide leadership in safety programs and initiatives and follow policies and procedures * Provide on-call support for areas of responsibility on a rotating basis * Comply with partnership safety policies and procedures * Perform energy isolation lockout/tagout procedures (LOTO) Required Education: * High school diploma or GED preferred. Required experience is commensurate with the selected job level: * Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience * Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience * Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: * Valid driver's license with demonstrated safe driving record * Excellent organizational skills * Excellent written and verbal communication skills with the ability to work effectively in a group environment * Demonstrated self-starter with the ability to work independently and exercise good judgement Preferred Qualifications: * Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment * Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, expense reporting, and on-line work applications and documentation Working Conditions and Requirements: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment * Frequent heavy lifting with and without assistance * Work on and around equipment and facilities that require knowledge of and adherence to safe work procedures and practices * Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays * Reliable attendance at work * Travel 95% of the time and staying overnight in hotels * CWI/CPWI certificate for welding inspecting, entering information in Project Pulse and completion packages, coordinating with X-ray along with other duties

Job Description: Trystar is at the forefront of advancing power solutions, charged and driven by a committed, dynamic team, tackling complex challenges, and creating innovative solutions. We're looking for motivated, driven, and talented individuals eager to be part of the future of power. Safety and integrity aren't just buzzwords, they are the north star guiding us as we aspire to wow our customers every day. We've created power solutions that are not only durable and unique but are also the result of exciting teamwork from every corner of our organization. Individually and collectively, every team member at Trystar plays for each other and strives to deliver unmatched value and 100% accuracy to our customers every single day. Our cutting-edge headquarters is in Faribault, MN, a facility that is partially solar- and wind-powered by our own microgrid! You'll find that we're also pushing boundaries across the country at our additional facilities in WI, MI, NH, NC, KY, TN, CO, TX & Quebec. Together, we are Trystar, where we power the future and nurture innovation for a brighter tomorrow. We are seeking an experienced Health, Safety & Environmental (HSE) Manager to lead the HSE function across our enterprise. The HSE Manager will be responsible for developing, implementing, and maintaining company-wide health, safety and environmental programs to ensure compliance with all local, state/provincial, and federal regulations. This position will oversee a team HSE professionals, promoting a culture of safety excellence and environmental stewardship across the organization. This role will report to Trystar HSE Director. We are looking for people who believe in our guiding principles and values of: Safety - We believe everyone should leave Trystar facilities in the same or better condition than when they arrived. Integrity - We're honest, transparent, and committed to doing what's right. Customer focus - We have relentless focus on our customers and their success. Right with speed - We use good judgement, make thoughtful decisions quickly, and execute them with purpose and intensity. Play for each other - We're a team. We show up for each other and we know that through teamwork we achieve greatness. Champion change - We know adaptation and improvement are requirements to survive and to thrive. Enjoy the journey - We create an environment where our team feels appreciated and has fun along the way. In this role you will get to: Leadership & Strategy Lead, mentor, and manage a distributed team of HSE professionals across North America. Execute a comprehensive HSE strategy aligned with company goals and regulatory requirements. Serve as the primary HSE subject matter expert for HSE team and site management teams. Compliance & Risk Management Ensure compliance with OSHA, EPA, DOT, and applicable Canadian regulations Oversee audits, inspections, and corrective action plans across all locations. Maintain and update company-wide HSE policies and procedures in alignment with changing regulations. Program Management Implement and maintain standardized safety programs, training materials, and systems across all sites. Lead initiatives in incident prevention, emergency preparedness, and risk reduction. Manage environmental programs related to air, water, and waste, including permitting, emissions tracking, and sustainability reporting. Provide manufacturing & engineering technical input into process hazard studies and capital projects ensuring safety is at the forefront of processes & projects. Assist in the development of the HSE budget for the site. Attend site management and department meetings on regular basis and upon request. Performance & Reporting Establish key performance indicators (KPIs) to measure HSE effectiveness and continuous improvement. Prepare and present regular reports to executive leadership on HSE metrics, incidents, and risk areas. Support root cause analysis for significant incidents and ensure proper follow-up actions. Culture & Engagement Promote a proactive safety culture focused on employee engagement, behavior-based safety, and accountability. Partner with HR and Operations to develop training and communication plans that reinforce EHS values. Job Requirements: BASIC QUALIFICATIONS Bachelor's degree in Health, Safety, Environmental or related field Minimum 7-10 years of HSE experience in a multi-site manufacturing environment Minimum 3 years in role leading HSE team members In depth knowledge of U.S. regulations, and industry best practices Experience managing cross-functional teams and driving organization change across multiple locations Strong ability to communicate in written and oral formats with diplomacy and tact Strong analytical and project management skills Competent in using Microsoft Office products and systems Ability to travel up to 50% to visit sites as needed ADDITIONAL QUALIFICATIONS Demonstrated success in teaching others health and safety concepts and requirements Professional certification as CSP An aptitude for exercising independent thinking and reasoning Previous success in working effectively in a cross functional environment Skilled in leading others without formal reporting authority Flexibility to work extended or later hours periodically to support second and third shifts Ability to communicate in Spanish as a second language preferred

We are Generac, a leading energy technology company committed to powering a smarter world. Over the 60 plus years of Generac's history, we've been dedicated to energy innovation. From creating the home standby generator market category, to our current evolution into an energy technology solutions company, we continue to push new boundaries. JOB SUMMARY As a Field Application Engineer II, you will be responsible for solving complex field issues, providing direct technical and application-specific support, and offering training to our key dealer accounts. By leveraging your expertise and experience with consumers and installers, you will play a pivotal role in improving product quality and serving as the "voice of the customer" to our Product Engineering and Product Management teams. Reporting to the regional Field Application Engineering Manager for Generac Clean Energy Systems, you will contribute to the success of our Solar + Storage installation businesses. Please note: This is a fully remote position based in Florida. MINIMUM QUALIFICATIONS: Bachelor of Science in Electrical Engineering or a related Engineering discipline. Alternatively, a valid Electrical Contractor's License and relevant experience will be considered. Minimum of 2-3 years of work experience as an Applications Engineer, Field Engineer or a technical expert in electrical and solar energy systems. Hands-on experience with residential electrical systems and PV + ESS. Strong knowledge of electrical and solar + storage system codes and compliance regulations. Intermediate knowledge of serial communications and connected devices. NABCEP Certification is desirable. PREFERRED QUALIFICATIONS AND EXPERIENCE: Electrical Contractor's license is a plus Experience reviewing and interpreting single-line diagrams and system designs Hands-on experience with residential electrical systems and PV + ESS Prior experience delivering technical training and mentoring NABCEP certifications Proficiency in Spanish language ESSENTIAL DUTIES Travel to customer sites within your assigned geographical area to provide technical support and assist with complex Solar + Storage installations involving Generac equipment. Document detailed information on service activities to ensure accurate records and facilitate future troubleshooting. Resolve highly technical product-related issues through effective communication over the phone and via email. Establish regular touchpoints with key installers to drive the adoption of PWRcell Solar + Storage equipment. Conduct training sessions at customer sites, covering design, installation, and other relevant topics. Review and provide support for single line diagrams and assist in design related task. Collaborate with Product Development teams to ensure successful product rollouts and maintain closed-loop feedback. Review training materials, manuals, and other technical content before publication. Provide technical guidance and support to internal and external sales associates. Collaborate with senior Field Application Engineers to diagnose and resolve escalated technical and installation issues, ensuring customer satisfaction. Identify regulatory barriers to customer success and mobilize internal resources to resolve them promptly. Mentor and support Field Applications Engineer 1s, enabling their professional growth and success. Conduct internal technical training for technical support and service operations personnel. Travel is required, including day trips and regional travel (up to 40%), with occasional out-of-region travel. KNOWLEDGE, SKILLS AND ABILITIES: Solid understanding of residential and commercial electrical systems. Ability to read and interpret schematics, with a good understanding of high voltage and measurement equipment. Competency with ENC and relevant utility interconnection standards. Competency with test equipment such as oscilloscopes, meters and loggers. Strong time management and organizational skills. Excellent interpersonal skills with a proven ability to build rapport and establish working relationships with customers, peers, and managers. Clear and effective communication in English, using proper grammar, to promptly and accurately address customer inquiries. General proficiency in Microsoft Office products and the ability to quickly adapt to other computer systems for efficient communication and problem-solving. LEVEL OF INDEPENDENCE Highly independent position that requires routines assignments to be completed with minimal supervision, escalating complex issues to management. #LI-UF1 Physical Demands: While performing the duties of this job, the employee is regularly required to talk and hear; and use hands to manipulate objects or controls. The employee is regularly required to stand and walk. On occasion the incumbent may be required to stoop, bend or reach above the shoulders. The employee must occasionally lift up to 25 - 50 pounds. Specific conditions of this job are typical of frequent and continuous computer-based work requiring periods of sitting, close vision and ability to adjust focus. Occasional travel. “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability status, protected veteran status, or any other characteristic protected by law.”

Trystar is a leader in power distribution equipment and related services at the heart of supporting our electrical infrastructure. Our team members focus on producing the highest quality products in the industry and providing industry-leading service. Whether based in our state-of-the-art headquarters in Faribault, MN , our corporate office in Burnsville, MN, or a member of our team out in the field, safety and integrity are our guiding principles, and we work together to achieve excellence for our customers every day. Trystar's team members are our most important asset, we are in search of UV Print Machine Operator for the Fabrication Department. This position plays a critical role in achieving our strategic objectives. Trystar's UV Printer position is an important part of Trystar's plan to become the world's foremost custom solution provider. The UV Print Machine Operator is a skilled professional responsible for operating and maintaining UV printing machines used to apply UV-curable inks onto various substrates, such as paper, plastic, glass, or metal. They play a vital role in the printing process, ensuring the efficient production of high-quality printed materials according to customer specifications. We are looking for people who believe in our guiding principles and values of: Safety - We believe everyone should leave Trystar facilities in the same or better condition than when they arrived. Integrity - We're honest, transparent, and committed to doing what's right. Customer focus - We have relentless focus on our customers and their success. Right with speed - We use good judgement, make thoughtful decisions quickly, and execute them with purpose and intensity. Play for each other - We're a team. We show up for each other and we know that through teamwork we achieve greatness. Champion change - We know adaptation and improvement are requirements to survive and to thrive. Enjoy the journey - We create an environment where our team feels appreciated and has fun along the way. In this role you will get to: Machine Setup: Prepare and set up the UV print machine by loading the appropriate inks, calibrating the print heads, and adjusting machine settings to match the printing requirements. Material Handling: Load and position the printing substrates onto the machine's bed, ensuring proper alignment and positioning for accurate printing. Stack and label finished product for transit in house. Printing Operations: Operate the UV print machine to apply UV-curable inks onto the substrates, ensuring the correct colors, saturation, and resolution as per customer orders. Input instructions to program automated machinery, using a computer. Quality Control: Regularly inspect printed materials to verify print quality and color accuracy, making adjustments as necessary to maintain high printing standards. Monitor feeding, printing, and racking processes of UV Printer and Engraver to maintain specified operating levels and to detect malfunctions; make any necessary adjustments. Maintenance and Cleaning: Perform routine maintenance tasks on the UV print machine, including cleaning print heads, replacing consumables, and troubleshooting minor issues to ensure optimal machine performance. Color Management: Calibrate and monitor color profiles to achieve consistent color reproduction throughout the print production process. Job Scheduling: Organize and schedule print jobs to meet production timelines and deadlines. Safety Compliance: Adhere to all safety guidelines and protocols while operating the UV print machine, ensuring compliance with company and industry safety regulations. Production Monitoring: Monitor the printing process to maintain a steady workflow and promptly address any deviations or inefficiencies. Documentation: Accurately record production data in Epicor, machine settings, and maintenance activities to maintain production records and assist in process improvement efforts. This also includes daily production reports, tally sheets, scrap reports, etc. Collaboration: Coordinate with other team members, including graphic designers, supervisors, and quality control personnel, to ensure smooth production flow and meet customer requirements. Read, comprehend, and execute processes and procedures according to the Standard Operating Procedures (SOP's) which are necessary to properly operate the equipment and manufacture the product. Monitor inventory of materials and supplies to ensure continual printer operation. Process Improvement: Continuously seek opportunities to improve machining processes, reduce cycle times, and enhance overall efficiency while maintaining high-quality standards. Perform other projects and duties as assigned. Job Requirements: BASIC QUALIFICATIONS 2 years of experience working in a manufacturing environment Minimum of 3 months of experience with a UV Printer or any Industrial printing equipment in a manufacturing environment Ability to read instructions, safely operate machines and visually inspect parts produced. Accuracy and timeliness in completion of work assignments is a must. Ability to lift and carry up to 50 pounds on an intermittent basis. Must be able to read, write and comprehend plant directives written in English. ADDITIONAL QUALIFICATIONS High school diploma Technical secondary education is preferred. Additional technical education or vocational training in printing or graphic arts is a plus. Have basic computer skills and accurate data entry experience for receiving and issuing products. Perform simple mathematics to comprehend and interpret process sheets, SOP manuals, tally sheets, etc. and to keep accurate account of materials used during manufacturing process including scrap amounts. Basic understanding of blueprints, mechanical assembly, and electrical assembly. The job may involve standing for extended periods and lifting/moving printing substrates (up to 50 pounds). Able to pass a pre-employment physical and drug test. Must adhere to all the PPE requirements to perform the job safely, this includes but is not limited to, Eye, Hand, Feet, and Hearing protection. Proficiency in setting up and operating UV print machines and related software. Knowledge of color management and printing techniques to achieve accurate color reproduction. Strong attention to detail and ability to detect and resolve print quality issues. Basic maintenance and troubleshooting skills for UV print machines. Good communication skills and the ability to work effectively in a team environment. Understanding of safety protocols and the ability to maintain a safe working environment. Benefits: 401 (k) with company match Medical Insurance Dental Insurance Vision Insurance Disability Insurance PTO Sick Time Employee Appreciation Time Paid Holidays Trystar is an Equal Opportunity Employer and is committed to creating a diverse and inclusive environment. We consider all applicants for employment without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, marital status, veteran status, or any other characteristic protected by law. We are committed to providing equal opportunities for all individuals and to fostering a workplace that values diversity, equity, and inclusion.

Job Description The Director of Maintenance & Reliability leads and continuously improves asset reliability across all company facilities. They're also responsible for developing and executing a unified reliability strategy that drives safety, uptime, and operational excellence in a high-risk, compliance-intensive industrial environment. This role builds upon established frameworks, processes, and systems to drive a proactive maintenance culture, while fostering continuous improvement and reliability excellence across the organization. The position also leads an engineering steering process with operational stakeholders and provides regular progress updates to executive leadership. This role reports to the Vice President of Operational Excellence. Responsibilities: Strategic Leadership & Framework Development Design and implement a robust maintenance and reliability framework aligned with organizational goals. Establish standardized processes, systems, and governance for preventive, predictive, and reliability-centered maintenance (RCM). Develop and maintain KPIs and metrics to measure performance, reliability, and cost-effectiveness. One Gopher Culture & Capability Building Champion a reliability-focused culture across all levels of the organization. Serve as a One Gopher voice by promoting collaboration and resource sharing across all sites. Ensure talent mobility and leverage individual strengths to build a unified, high-performing team. Drive cross-site alignment on key processes such as shutdown planning and execution, maintenance practices, reliability strategies, and critical spare inventory management. Lead training and development initiatives to enhance technical skills and promote ownership of reliability principles. Drive engagement and accountability within maintenance teams and cross-functional stakeholders. Systems & Process Optimization Oversee implementation and optimization of CMMS/EAM systems for work management, asset tracking, and data analytics. Integrate advanced technologies (condition monitoring, predictive analytics) to enable data-driven decision-making. Ensure compliance with safety, regulatory, and quality standards. Strategic Improvement Planning Develop and execute long-term strategic improvement plans for both maintenance and reliability functions. Identify needed capital investments to asset life extension and mitigate operational risk. Lead cross-functional initiatives to improve equipment uptime, reduce unplanned downtime, and optimize total cost of ownership. Engineering Steering & Executive Reporting Drive an engineering steering process in collaboration with operational stakeholders to prioritize and execute reliability initiatives. Present progress, key metrics, and strategic recommendations to executive leadership on a regular basis. Ensure alignment between engineering, operations, and business objectives. Leadership & Financial Stewardship Manage departmental budgets, resource allocation, and capital planning for maintenance and reliability projects. Build and mentor a high-performing team of maintenance and reliability professionals. Collaborate with operations, engineering, and supply chain to align priorities and deliver business objectives. Requirements: Bachelor's Degree in Mechanical Engineering, Electrical Engineering, or related discipline from accredited College or University OR a High School Diploma/GED plus at least 15 years of previous work experience within industrial maintenance leadership roles. 5+ years of experience in reliability or maintenance leadership roles within heavy industrial environments. Technical proficiency with and experience using CMMS (Computerized Maintenance Management Systems) and Microsoft Office (Excel, Project, PowerPoint, Word). Expertise with reliability-centered maintenance (RCM) and predictive technologies and programs. Leadership skills to champion positive change, manage conflict to resolution, and maintain high morale. Excellent organizational skills, balancing multiple projects with attention to detail. Demonstrated ability to identify strategic improvement opportunities and act decisively to realize those opportunities. Excellent interpersonal and communication skills with the ability to build key relationships with cross-functional, internal, and external stakeholders. Ability to set priorities and deliver results in situations with shifting priorities. Knowledge of process safety management and environmental regulations. Willingness and ability to travel domestically Preferred Qualifications: Previous experience with multi-site reliability program development and execution preferred, but not required. Previous experience upgrading or changing CMMS system preferred, but not required. Physical Requirements: Ability to wear respiratory protection up to 12 hours a day with or without reasonable accommodation. Ability to work in a hot production area wearing protective clothing for up to 12 hours a day with or without reasonable accommodation. Ability to wear Personal Protective Equipment (PPE) in designated areas with or without reasonable accommodation. Compensation Information: Salary Range: $145,907 - $240,599. This position is also eligible for a short-term incentive plan which is determined by the achievement of strategic objectives. The market rate for the role is typically at the midpoint of the salary range; however, variations in final salary are determined by additional factors such as candidate qualifications, relevant years of experience, geographic location, internal pay equity, and prevailing market conditions for the specific role. Benefits: Gopher Resource is proud to offer a comprehensive benefits package that promotes the health, wellness, and financial security of our employees. List of benefit offerings include medical & pharmacy, dental, vision, health savings account (HSA), flexible spending account (FSA), dependent care spending account, life insurance, disability programs, telemedicine, parental leave, tuition support, legal insurance, identity theft protection, gym membership discounts, EAP, 401(k) with a company match, and paid time off (vacation, personal, bereavement, holidays). Gopher Resource is an Equal Opportunity Employer.

Job Title: Design Drafter - Sustaining Engineering Trystar is at the forefront of advancing power solutions, charged and driven by a committed, dynamic team, tackling complex challenges, and creating innovative solutions. Safety and integrity aren't just buzzwords. They are the north star guiding us as we aspire to wow our customers every day. We've created power solutions that are not only durable and unique but are also the result of serious teamwork from every corner of our organization. Individually and collectively, every team member at Trystar plays for each other and strives to deliver unmatched value and 100% accuracy to our customers every single day. As a big name and pioneer in power solutions, we're not just part of the power conversation - we're shaping its future, and we're doing so across diverse industry sectors including healthcare, data centers, entertainment, education, government, and commercial construction - just to name a few! We're committed to growing and evolving our product lineup to stay on top of the game and that includes leaning into sustainable, resilient, and renewable energy solutions. Trystar's team members are our most important asset, we are in search of a Designer to join our team. As part of the engineering team, the Designer will be supporting the team by creating and updating both mechanical and electrical design to support product improvements with accurate engineering documentation (e.g. 3D models, mechanical drawings, schematics, etc.). The ideal candidate will be proficient in CAD tools and capable of creating detailed drawings and models that meet engineering and industry standards. This position reports directly to the Sustaining Mechanical & Electrical Engineering Manager. Job Responsibilities: Develop and revise detailed mechanical and electrical drawings, schematics, and layouts using CAD software Collaborate with engineering teams to translate product improvement concepts and prototypes into production-ready designs. Create and maintain accurate documentation including BOMs, assembly instructions, and revision histories. Ensure designs comply with applicable codes, standards, and manufacturing capabilities. Perform tolerance analysis and ensure proper fit and function of mechanical components. Assist in the integration of electrical components into mechanical assemblies. Review and incorporate feedback from engineers, manufacturing, and quality teams. Maintain drawing databases and support change management system Job Requirements: BASIC QUALIFICATIONS Associate's degree in mechanical engineering technology, Electrical Engineering Technology, or related field. 6+ years of experience in mechanical and electrical drafting/design. Proficiency in CAD tools such as AutoCAD, SolidWorks, and electrical design software. Understanding of mechanical fabrication processes and electrical wiring standards. Experience with ECO processes and change management systems. Strong attention to detail and organizational skills. Ability to work independently and in a team environment. Excellent communication skills for cross-functional collaboration. ADDITIONAL QUALIFICATIONS SolidWorks Electrical experience Excellent interpersonal skills with a proven ability to manage multiple tasks Strong communications skills Ability to adapt & thrive in a fast-paced/high growth work environment Experience with ERP and Electrical CAD software Microsoft Office proficiency Passion for Trystar, its culture, and a commitment to deliver on its growth, performance, and operational metrics

Job Description Flotech is a subsidiary of FloWorks International LLC, which is a privately held company located in Houston, Texas. As a Valve Technician you are responsible for performing maintenance, assessment, repair and testing on various types of industrial valves. This position has no supervisory responsibilities. Some of the exciting things you will do in this role... Responsible for repair and testing of various valves, including but not limited to ball valves, gate valves, butterfly valves, safety relief valves, etc. Perform disassembly, cleaning, inspection, measuring, reassembly and testing of valves at Flotech facilities and client locations. Follow all schematics and documented procedures in accordance with all Quality Control and ASME National Board standards that apply to the job. Thoroughly complete all calibration and documentation associated with testing and repairs. Travel to job sites and adhere to all site safety and performance requirements. Communicate timely updates to management, co-workers and customers to ensure timely and successful completion of job responsibilities. Works closely with co-workers, management and safety coordinator to ensure compliance with OSHA and other safety regulations. Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics. Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others. Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed. Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly. A nice to have... High School Diploma or GED and a minimum of 2 years industrial valve repair experience, or equivalent number of years of education and experience. Familiar with tools and machinery required to perform daily valve repair duties. Experience with repairing various valves and actuators, whether pneumatic, hydraulic or electric. Valid Driver's License. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. Ability to add, subtract, multiply and divide all units of measure, using whole numbers, common fractions and decimals. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. The perks of working here.... Tuition Reimbursement Competitive Pay + Bonus Medical, Dental, Life, and Supplemental Benefits 401(K) retirement plan + up to 4% company matching Employee Referral Program Volunteer Time Off Physical demands and work environment: Frequent exposure to fumes or airborne particles. Frequent exposure to loud noises. Continually required to stand, walk, bend, crouch and climb. Continually required to use hands and fingers and reach with arms. Frequently required to lift up to 50 lbs. Continually required to talk or hear. Occasionally exposed to outdoor weather conditions (heat, cold, rain). Travel up to 75%. This information indicates the general nature and level of work performed by associates in this role. It is not designed to contain a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this role. This description supersedes any previous or undated descriptions for this role. Management retains the right to add or change the duties of the position at any time. Questions about the duties and responsibilities of this position should be directed to the reporting Manager or Human Resources. FloWorks is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or protected veteran status. FloWorks participates in the US Government's E-Verify program.

Important Application Submission Information In order to ensure your application is successfully received before the job posting expires, please submit your application by 11:59 PM on Tuesday, October 21, 2025More than a career - a chance to make a difference in people's lives. Build an exciting, rewarding career with us - help us make a difference for millions of people every day. Consider joining the Duke Energy team, where you'll find a friendly work environment, opportunities for growth and development, recognition for your work, and competitive pay and benefits. Position Summary The Transformer SME provides technical support and guidance to the Regional Engineers, System Intelligence, field crews, and C&M Supervisors for issues associated with transformers (both T/T and T/D), regulators (both single-phase and three-phase), instrument transformers (primary-side only), and ancillary components (e.g., bushings). This support includes both substation and mobile (portable) equipment. This support may be provided during maintenance, construction, or while equipment is in operation. The Transformer SME provides the first level of technical field support beyond the field crews, C&M Supervisors, and the Region Engineer for issues associated with Transformers, Regulators, and other ancillary components. The Transformer SME serves as a conduit between C&M, Engineering, and Asset Management peers to provide expertise for operational issues associated with Transformers, Regulators, and other associated ancillary components. Transformer SME support may require interface with the following organizations, as a minimum: Craft Workforce (Maintenance, Construction, and Test) Project Management Work Management Transmission Engineering (P&C, Substation, and Line) ECC/DCC personnel Generation Plant PTAC and System Engineers Transformer Shop personnel Field & Shop Testers Distribution Engineering Other Asset Management Personnel (System Standards, Equipment Engineering, Transmission and Substation Performance, Data Management, and System Intelligence) Transmission Planning Large Account Managers (LAM) for external customers (e.g., industrial, commercial, and Electric Municipalities Corporations) Responsibilities The following is a summary of the major tasks expected to be performed by this position: Works with System Intelligence to provide evaluations and interpretation of Transformer test results and the trending. Works with System Intelligence to recommend proactive maintenance tasks to Equipment Engineering for Transformer and Regulator equipment to mitigate recurring problems and potential failures. Provides field support for troubleshooting, adjustment, repair, and replacement of Transformer, Regulator, and other ancillary components Assists Region Engineer with outage analysis, documentation, and follow-up Provides support and/or operation for discipline specific test equipment needs and training Provides forensic analysis on failed parts and equipment, including support for Root/Apparent cause investigations Works with System Intelligence to record transformer and regulator failures and assign failure codes for tracking and trending. Performs substation, mobile (portable), and equipment condition assessments Works with System Intelligence to evaluate the performance and reliability of Transformer and Regulator assets and identifies/mitigates the system and/or equipment issues that may impact system reliability. Establishes working relationships with industry organizations and counterparts within other utilities to learn about industry trends/practices and to share information regarding equipment and maintenance initiatives Evaluates equipment being removed from service for future disposition Assists System Intelligence in evaluating Condition Based Monitoring equipment/data and works with vendor to assist in repairs. Acts as liaison between Asset Management and C&M Substation Supervisors/technicians. The following are secondary roles and responsibilities to be performed by this position: Supports equipment commissioning Supports equipment commissioning Provides feedback to appropriate Engineering organization on first-time equipment deployment. (Equipment engineering takes the lead for warranty work.) Supports Equipment Engineering and manufacturers on equipment issues. Assists with mobile equipment installation as needed. Assists Equipment Engineering in developing maintenance PM priorities when needed. Leads or participates in Root Cause Investigations Serves on Duke Energy teams to provide asset-related experience and knowledge Assists in providing guidance on job plans and procedures Assists/supports TSS and training department with training for Transformers, Regulators, and other ancillary components Assists Critical Part Coordinator SME with material selection for maintenance repairs as needed. Assists Critical Part Coordinator SME with validation for stocking of critical parts inventory. Assists Equipment Engineering in validating the equipment sparing strategy including stocking of critical spares. Provides Work Management and Data Management support for system programs and other projects as follows: Analyzes data for work prioritization Provides review of contractor test data as needed Provides input to Equipment Engineers for the revision of job plans and procedures. Support as needed emergent/emergency projects for failed equipment (i.e. scope and estimates, sponsorship, etc.) Assists System Intelligence in managing the implementation of the Transformer Health & Risk Management (HRM) Program Supports TSS and training department on ongoing training for new power equipment, special test equipment, Condition Based Monitoring Equipment, etc. Basic/Required Qualifications Bachelor of Science in Engineering from an ABET accredited program, or Professional Engineering License, with a minimum of eight (8) years of engineering experience Nuclear may require either Professional Engineer registration, a Masters Degree in a technical discipline, SRO certification, an RO or SRO license, or Technical Nuclear certification A Master's degree in Engineering will be considered in lieu of the B.S. Engineering degree Desired/Preferred Qualifications Experience in the utility industry 12 years or more of related Transmission experience Transformer design and field work experience Superior problem solving and analytical skills Expert working knowledge of the transmission equipment, systems & associated safety policies, practices, and work procedures Department specific experience applicable to the hiring department Transformer specific experience (commissioning, troubleshooting, forensics) Effective verbal and written communication skills and ability to work with various disciplines Ability to work self-directed and be a team player Excellent interpersonal skills with ability and willingness to share information and transfer knowledge to others. Working Conditions Field Mobility Classification - Work will be performed in various field locations, as needed, after the onboarding period. However, field employees are required to live within a reasonable daily commute to their assigned work location Must live within one-hour from the nearest Duke Energy Operations Center or Facility Work Schedule: 4x10s (Four 10-hour days) Specific Requirements The duties of this position include substantial operation of a motor vehicle. Valid driver's license and acceptable driving record are required. #LI-VF1 #LI-Field Travel Requirements 15-25%Relocation Assistance Provided (as applicable) YesRepresented/Union PositionNoVisa Sponsored PositionNoPlease note that in order to be considered for this position, you must possess all of the basic/required qualifications. Privacy Do Not Sell My Personal Information (CA) Terms of Use Accessibility

Assemble and repair boilers, tanks, bats and pressure bessels, boiler auxiliaries and ancillaries according to specifications, sing power tools rigging equipment and hand tools. Responsibilities Key Responsibilities Locates and marks reference points for columns or plates on foundation, sing master straight edge, squares, transit and measuring tape and applying knowledge of geometry Attaches rigging or signals crane operator to lift components to specified position Aligns structures or plates sections to assemble boiler frame, tanks or vats sing plumb bobs, levels, wedges, dogs or turnbuckles Hammers, flame-cuts, files grinds irregular edges of sections or structural parts to facilitate fitting edges together Bolts or arc-welds structures and sections together. Positions drums and headers into supports or bolts or welds supports to frame Aligns water tubes, connects and expands ends to drums and headers using tube expander Bolts or welds casing sections, uptakes, stacks, baffles and such fabricated parts as chutes, air heaters, fan stands, feeding tube, cat walks, ladders, coal hoppers and safety hatch to frame using wrenches Performs minor maintenance or cleaning activities with tools and equipment Installs manholes, handholds, valves, gauges and feed water connection in drums to complete assembly of water tube boilers Signals crane operator in lifting parts to specific positions Assists in testing assembled vessels by pumping water or gas under specified pressure into vessels and observing instruments for evidence of leakage Repairs boilers or tanks in field by unbolting or flame cutting defective sections or tubes, straightening plates using torch or jacks, installing new tubes, fitting and welding new sections and replacing worn lugs on bolts May fasten and caulk sections of vessels, using pneumatic fasteners and caulking hammers May line firebox with refractory brick and blocks May fabricate parts such as, stacks, uptakes, and chutes to adapt boiler to premises in which it is installed Flame cutting and knowledge of torch use Responsible for observing and complying with all safety and project rules Qualifications Qualifications and Requirements Work within precise limits or standards of accuracy Apply shop mathematics to solve problems Plan work and select proper tools Compare and see differences in the size, shape and form of lines, figures and objects Visualize objects in three dimensions from plans and drawings Make decisions based on measurable criteria Work at heights without fear

JOB TITLE: SCADA Technician Work Hours: 7:00am - 3:30pm, M-F plus some irregular hours when needed (pursuant to the CBA) Our benefits include: $10,000. Sign-on Bonus Company-wide annual incentive plan Medical, vision and dental insurance 401(k) plan with a generous 6% company match Company funded Pension Plan On-site wellness/medical facility Company paid Short & Long-Term Disability insurance Health Savings Account with an employer contribution Flexible Spending Accounts Paid time off and paid holidays Wellness program with financial rewards Tuition reimbursement Group life insurance Critical Illness and Accident Insurance LCEC provides reliable, cost-competitive electricity to more than 250,000 members throughout a five-county service territory located in Southwest Florida. We employ approximately 460 skilled employees and are one of more than 900 electric distribution cooperatives located throughout the United States. LCEC has been recognized locally and statewide as an industry leader and continually receives acknowledgment for the work that our employees do in the community along with other civic, environmental and professional honors. Position Summary: This position is responsible for installing and maintaining all equipment related to LCEC's Supervisory/Control telemetry system in substations and pole mounted devices. This position is responsible for maintaining the infrastructure for LCEC's dispatch radio system. This position is responsible for maintaining the substation electronics and communication facilities that operate LCEC's AMR system. Position Responsibilities This position is responsible for calibrating, installing, and maintaining communication, electronic and associated equipment which will ensure the efficient, safe, and reliable operation of LCEC's transmission and distribution electric system. Must be able to understand and work within LCEC and OSHA safety standards. Abide by all LCEC safety policies and guidelines. Must act with a sense of urgency to troubleshoot and resolve complex electronic problems related to communication, monitoring and control systems. Ability to work independently on complex electronic schemes and in a team environment to accomplish goals and meet deadlines. Must be able to identify and plan work, and coordinate with others within the organization (including System Operations, Engineering and Substation Dept) to successfully execute. Maintain a clean work area and inspect shop and work sites to ensure safety and efficiency. Participate in a rotating 24/7 on-call schedule. Provide ongoing maintenance of all transmission, substation, and distribution SCADA control systems. Provide ongoing maintenance of all communication equipment related to LCEC's AMR system, including processor and electronic equipment in substations. Provide ongoing maintenance of LCEC voice and data radio system equipment (wireless modems, radios, repeaters, base stations, consoles). Troubleshoot and make repairs on SCADA control systems, AMR and radio system equipment. Maintain wireless camera equipment including router, solar array, charger and batteries at LCEC transmission water crossings. Install, perform acceptance testing, and commission new equipment for SCADA/AMR/Communication system replacement or expansion. Perform evaluations, test, and make recommendations on new or revised equipment. Participate in project pre-engineering by providing technical input and information as required. Monitor levels of appropriate parts required to repair systems on a daily basis. Notify supervisor of any deficiencies. Mentor appropriate personnel in operation and maintenance of SCADA, AMR and communication facilities. Provide mentoring to technicians at equal or lower steps. The department supervisor may, at his/her discretion, identify or create these training opportunities. Maintain effective working relationships with employees and customers at all levels within LCEC. Ensure smooth operations, productive communications, and effective understanding during all interpersonal contacts. Provide current and accurate information to all requesters, courteously and in a timely manner. Perform other related duties as assigned. Support Storm Restoration efforts when needed. Work in emergency storm situations (i.e. hurricanes) and work long hours (>12 hours per day) for many continuous days/weeks as needed. Education High School Diploma or the equivalent (Required) and An associate's degree or a two-year technical or trade school certificate of completion in electronics or electrical engineering technology; computer technology, networks or information systems; fiber optics; or related field (Required) or Documented completion of a 4-year utility SCADA technician apprenticeship program, equivalent to journey-level certification. Experience Two (2) years' experience in troubleshooting electronic systems consisting of microprocessor-based systems and analog systems. (Required) Two (2) years' experience in troubleshooting supervisory control and data acquisition (SCADA) systems, intelligent electronic devices (IEDs), or electronic communication protocols or Two (2) years' experience in troubleshooting data or voice-based RF equipment or Two (2) years' experience in utilizing a PC to download, modify, and upload configuration files to microprocessor-based equipment. (Required) Knowledge, Skills, and Abilities Ability to work independently within one (1) year of job award. (Required) Ability to work irregular hours for assignment completion and flexibility to change scheduling and report to work on short notice during emergency situations and outside of regular assigned shift; ability to work overtime, on-call and availability to respond to call-outs and maintain an acceptable call out response. (Required) Must live within a 45-minute commute from regular worksite. (Required) Must be able to travel daily within the service area; field work in an electrical substation environment with regular exposure to energized and de-energized equipment on voltages ranging up to 138kV; exposure to adverse weather conditions; bucket truck or ladder at pole mounted devices, platforms on communication towers (no climbing), and general office environment. (Required) Licenses/Certifications Must possess and maintain a valid Florida Driver's License. (Required) General Communications Technician - Level 1 or higher; or equivalent certification. (Preferred) Physical Demands and Working Environment: The physical demands and working environment characteristics described here must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: Standing Constantly, Walking Constantly, Lifting Constantly up to 50lbs, Carrying Constantly up to 50lbs, Pushing Constantly, Pulling Constantly, Climbing Constantly, Balancing Constantly, Stooping Constantly, Kneeling Constantly, Crouching Constantly, Crawling Frequently, Reaching Constantly, Handling Constantly, Grasping Constantly, Feeling Constantly, Talking Frequently, Hearing Frequently, Repetitive Motions Constantly, Eye/Hand/Foot Coordination Constantly, Working Environment: Occasionally Extreme cold, Occasionally Extreme heat, Occasionally Humidity, Occasionally Wet, Frequently Noise, Frequently Hazards, Occasionally Temperature Change, Occasionally Atmospheric Conditions, Frequently Vibration. STORM DUTY REQUIREMENTS.... Responding to storms may be considered a condition of employment: LCEC provides critical services to our community during an emergency. Employees may be required to participate in the response/recovery activities related to emergencies/disasters to maintain service to our LCEC members. Employees are required to work in their normal job duties or other assigned activities. Proper compensation will be made in accordance with the company's guidelines and procedures. Please note that at the time a candidate is made a job offer, the candidate will be subject to a background check and a drug screening.