Electrical Project Engineer jobs at Greif

Responsibilities and Measurement Criteria with Time investment Needed on Each: (This will describe the overall core responsibilities of the role, decision making responsibilities etc.) Design and development of UPS subsystems/components in compliance with specifications, EMC/EMI requirements, and applicable standards. PCB design. Detailed analysis of UPS electronic subsystems/components, focusing on performance evaluation, design optimization, component selection and sizing, and control strategy. Collaboration in an interdisciplinary engineering environment (with embedded, test, and mechanical engineers) to define requirements, discuss trade-offs, participate in design verification, and ensure successful integration of single-phase UPS designs. Continuous improvement of existing designs, evaluation of application issues, and resolution of those issues in the design of new products. Evaluation of new technologies to enhance and implement them in new R&D systems and processes. Adherence to agreed-upon project timelines. Preparation of relevant technical reports. Qualifications: Required/ Minimum Qualifications: Master's degree or higher in Electrical Engineering with a focus on power electronics. Proficiency in medium-to-low power circuit topologies, principles of power electronic converters, and semiconductor devices. Additional / Preferred Qualifications: - Hands-on experience with PCB design and layout. Knowledge of electronic design practices for EMC compliance. Strong analytical skills combined with excellent problem-solving abilities and interpersonal communication. Experience in UPS and power module development is highly desirable. Physical & Environmental Requirements: - (To be used majorly for manufacturing jobs.) None Time Travel Needed: 10% OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #LI-CM1

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Research & Development Req ID: 27658 Summary The Lincoln Electric Company is seeking an Electrical Engineer for our Euclid, OH world headquarters. The Electrical Engineer plays a key role in the electrical design, development, and support of Lincoln's DC Fast Charger, one of our newest product lines. You will help drive the future of clean energy solutions by contributing to the development of DC Fast Chargers (DCFC) for electric vehicles (EV) team. In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, paid time off and many more outstanding benefits! What You Will Do Electrical Design & Development: Design and implement electrical systems and circuits for DCFC products, including but not limited to magnetics, circuit boards, wire harnesses, and integration with software controls. Engineering Support: Lead and manage activities related to outsourced electronic assemblies and components. Cross-Functional Collaboration: Work closely with software/controls engineers to integrate electrical and software systems effectively, ensuring seamless product development. Thermal & Mechanical Design Support: Partner with mechanical engineers to ensure that electrical and thermal requirements are addressed within the mechanical packaging and system design. Regulatory Compliance: Navigate and ensure compliance with relevant regulatory standards and guidelines to ensure that all designs meet or exceed safety and performance requirements. Manufacturing & Testing: Collaborate with manufacturing engineers to define policies and processes for building and testing high-power EV chargers, ensuring product quality and manufacturability. Problem-Solving & Troubleshooting: Analyze and resolve technical issues related to product failures, driving root-cause analysis and corrective action. Required Experience & Education Bachelor's degree in electrical engineering or related field. Level II Engineer 3+ years of hands-on engineering experience in electrical design. Level III Engineer 5+ years of hands- on engineering experience in electrical design. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experiences. Technical Expertise: Strong understanding of electrical design principles, circuits, power systems, and system integration. Experience with high-power electronics and DC fast chargers is desirable but not required. Communication Skills: Excellent written and verbal communication skills, with the ability to present complex technical concepts to cross-functional teams and stakeholders. Collaboration & Independence: Ability to work both independently and collaboratively in a team-oriented environment, demonstrating a proactive approach to project management and problem-solving. Adaptability: Ability to thrive in a fast-paced, ever-evolving environment, managing multiple priorities and deadlines effectively. Ownership & Initiative: A self-starter with a strong sense of ownership over product designs and a passion for continuous improvement. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Plymouth - 46247 Req ID: 27950 Job Summary We are seeking an entry-level Industrial Controls Engineer with a focus on system design for custom machinery projects. This role offers hands-on training and mentorship to develop skills in electrical schematics, hardware selection, and control system architecture. Ideal for recent graduates eager to grow in industrial automation. Key Responsibilities Assist in developing control system architectures for custom machinery. Support hardware selection and creation of electrical schematics. Help prepare documentation including wiring diagrams and panel layouts. Collaborate with senior engineers on design reviews and integration tasks. Participate in installation and commissioning under supervision. Ensure compliance with safety and quality standards. Qualifications Bachelor's degree in related field (or in progress) or experience in related field. Basic understanding of electrical design principles. Familiarity with AutoCAD Electrical or willingness to learn. Strong interest in industrial automation and system design. Travel: 30% - 50% Preferred Skills Exposure to industrial networks (EtherNet/IP, Modbus, ProfiNET). Coursework or internship experience in control systems. Strong communication and teamwork skills. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Chattanooga Req ID: 27857 Pay Range: $23.41 / hr - $38.46 / hr Bonus: 5% Summary Lincoln Electric Automation is seeking a Controls Design Engineer to design, develop, and implement electrical and automation systems for integrated tooling and advanced manufacturing equipment. This role focuses on control system architecture, hardware specification, PLC/HMI programming, and ensuring compliance with industry safety and quality standards. This is an on-site position located in our Chattanooga, TN plant. In addition to competitive pay, Lincoln Electric offers bonus compensation, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, paid time off and many more outstanding benefits! Responsibilities Develop electrical control system architectures, including schematics, wiring diagrams, and panel layouts. Specify, select, and integrate automation components such as PLCs, HMIs, servo drives, VFDs, sensors, actuators, and safety devices. Program PLCs, HMIs, and other control devices to implement control algorithms and logic Collaborate with mechanical, robotics, and fabrication teams to ensure system designs align with project objectives and customer specifications. Perform system testing and troubleshooting to ensure proper functionality. Produce technical documentation per standards and ISO 9001 processes, including design packages, test plans, and revision records. Maintain working knowledge of emerging automation technologies and relevant safety standards. Required Education & Experience Bachelor's degree in Electrical Engineering, Controls Engineering, or related field; equivalent experience considered. 3+ years of experience designing industrial control systems or automated machinery. Proficiency with AutoCAD Electrical or EPLAN for schematic and panel design. Solid understanding of AC/DC power distribution, motor control, motion systems, pneumatics, and industrial networking protocols. Experience with robotics integration, welding automation (arc, laser, resistance), or machine tooling systems preferred. Strong troubleshooting, analytical, and system-level problem-solving skills. Ability to manage multiple projects and adapt to changing priorities in a dynamic engineering environment. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Coldwater Employment Status: Salary Full-Time Req ID: 27771 Position Summary Manage engineering processes required to design, build, ship, and service Lincoln Electric Automation equipment. Position Responsibilities Coordinate and Lead Engineering Design (mechanical, pneumatic, and hydraulic) Lead Project Team in the effort of adhering to both a challenging project timeline as well as a tight financial budget (hours and material) Assist in establishing Project timelines and determining manpower needs Assist purchasing in establishing costs and suppliers for purchased items Assist onsite installation and startup activities including commissioning of equipment and resolution with customer as part of the installation Assist in developing/maintaining engineering and product standards Coordinate compiling of operator and maintenance manuals Ensure required ISO documentation is completed. Work well in a team environment and communication groups may include; Machine builders, Project Management, Engineering Teams, Management, and support functions Assist in team performance evaluations and lead mentoring process of new/inexperienced engineers Must present mechanical designs to the customers designers Excellent attention to detail and accuracy Excellent problem solving skills and can work under pressure Assumes additional responsibilities and performs special projects in support of the Company's 2025 Strategy Essential Skills and Experience Bachelor's Degree in Mechanical Engineering or proven equivalent in experience desired CAD (3D modeling) & Solidworks required 5+ years of experience in manufacturing and design of industrial automated equipment preferred Industrial hydraulic and pneumatic experience preferred Team Leadership experience Ability to work independently and in a team environment Excellent verbal and written skills Stay up to date with industry developments and technologies Commitment to company values Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Plymouth - 46247 Req ID: 27952 Job Summary We are seeking an Industrial Controls Engineer specializing in PC, PLC and HMI programming for custom machinery projects. This role focuses on developing, testing, and commissioning control logic and operator interfaces to ensure optimal machine performance. The ideal candidate will have strong programming skills and experience integrating automation components. Key Responsibilities Create source code for PC base industrial control systems. Design and program PLC logic for custom machinery (Rockwell/Allen-Bradley preferred). Develop HMI interfaces for operator interaction. Test and debug control programs to ensure reliability. Integrate motion control systems, sensors, and safety devices. Support on-site installation and commissioning of programmed systems. Troubleshoot and resolve programming issues during build and post-installation phases. Maintain software documentation and version control. Coordinate with contractors during installation for programming adjustments. Qualifications Bachelor's degree in electrical engineering or related field, or equivalent experience. 5+ years of experience in PLC and HMI programming. Proficiency in Rockwell Studio 5000 and FactoryTalk View, or Siemens TIA Portal. Knowledge of industrial communication protocols (EtherNet/IP, Modbus, ProfiNET). Strong troubleshooting and debugging skills. Travel: 30% - 50% Preferred Skills Experience with robotics and motion control programming. Familiarity with safety PLCs and advanced diagnostics. Ability to work independently and manage multiple programming tasks. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Plymouth - 46247 Req ID: 27949 Job Summary We are seeking an Industrial Controls Engineer specializing in system design for custom machinery projects. This role focuses on developing complete control system architectures, including hardware selection, electrical schematics, and network layouts. The ideal candidate will excel in creating robust designs that integrate seamlessly with mechanical systems and meet customer specifications. Key Responsibilities Develop complete control system architectures for custom machinery. Select hardware components and design electrical schematics. Create network layouts and ensure system scalability. Collaborate with mechanical engineers for integration. Prepare detailed wiring diagrams and panel layouts. Ensure compliance with NFPA, UL, and OSHA standards. Support installation and commissioning by providing design expertise. Coordinate with contractors during installation to ensure adherence to design. Complete required engineering documentation including DFMEA, Panel Heat Loads, Safety Risk Assessments, Motor Sizing Calculations. Qualifications Bachelor's degree in electrical engineering or related field. 5+ years of experience in industrial control system design. Proficiency in AutoCAD Electrical or similar tools. Knowledge of industrial networks (EtherNet/IP, Modbus). Strong understanding of safety standards and compliance requirements. Travel: 30% - 50% Preferred Skills Experience with UL panel design and CE compliance. Familiarity with motion control and robotics integration. Ability to manage multiple design projects simultaneously. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Arconic is currently in search of an entry level Electrical Engineer to join our Plate Department based in our Davenport, IA location. At Arconic, we take pride in our work and our innovative products and technologies that advance sustainable solutions for a better world. We strive to create a safe, inclusive, and collaborative workplace with competitive benefits, development opportunities and a culture that values and rewards employees on all levels of the organization. Job Summary: This entry level Electrical Engineer is a great opportunity to apply your technical skills while coordinating numerous capital projects across the Plate department. This role is driven by self-directed work and collaborative efforts with a team of Electrical Engineers, Technical staff, maintenance, and production across the department. The Electrical Engineer reports to the Lead Electrical Engineer in the department and will work Monday through Friday during daytime hours. You will support off-shifts as needed for your respective projects. In this role, you will: Coordinate all phases of assigned area electrical engineering projects from concept, scope development, written specifications, bid solicitations, design, manufacturing, equipment commissioning, and project closure. Lead and participate in problem solving efforts with multi-discipline technical staff, maintenance and production. Use PI Vision and Data Link to analyze process issues and provide input to solve process problems. Create and develop electrical control solutions that will support process improvements and improve equipment reliability. Assist production and maintenance with equipment and process issues. PLC/HMI and controls redesign and upgrades of existing processes. Install and troubleshoot camera systems on industrial equipment. Incorporate SMART Manufacturing principles and tools into automated inspection systems to improve processes, data collection/analysis, and drive quick results in recovery improvements. Qualifications You have: Bachelor's Degree in Electrical Engineering Technology or Electrical Engineering from an accredited institution 1-3 years of Electrical Engineering experience (including Internship) Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire Visa sponsorship is not available for this position This position requires access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R. 730, et seq.) and/or the International Traffic in Arms Regulations (ITAR). Authorizations from the relevant government agency may be required to meet export control compliance requirements. Exceptional Candidates possess: Manufacturing experience in a highly industrial environment 1-3 years' experience with PLC's, HMI's, AC/DC drives & motors, measuring devices and ethernet cameras Proficiency with Rockwell programming software (i.e.: RS Logix and FactoryView) Proficiency in Microsoft Office Suite and Project programs Good oral and written communication skills in a variety of settings (shop floor, peers, plant leadership, etc) Demonstrated success as a project implementation manager, including budget and schedule development. About Us Arconic Corporation is a leading provider of aluminum sheet, plate and extrusions, as well as innovative architectural products, that advance the automotive, aerospace, commercial transportation, industrial and building and construction markets. Building on more than a century of innovation, Arconic helps to transform the way we fly, drive, and build. We live our core values and commit to delivering sustainable value to our customers, our employees, our communities and our stakeholders. At Arconic, we: Act With Integrity. We lead with respect, honesty, transparency and accountability. Safeguard our Future. We protect and improve the health and safety of our employees, communities and environment. Grow Stronger Together. We cultivate an inclusive and diverse culture that advocates for equity. Earn Customer Loyalty. We build customer partnerships through best-in-class products and service. Drive Operational Excellence. We pursue continuous improvement through innovation, agility, people development and collaboration. Create Value. We achieve success by generating and growing value for our stakeholders. This position is subject to Export Control Law This position requires access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R. 730, et seq.) and/or the International Traffic in Arms Regulations (ITAR). Authorizations from the relevant government agency may be required to meet export control compliance requirements. Equal Employment Opportunity Statement Arconic is an equal opportunity employer. We take action to ensure equal opportunity for all applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or other legally protected characteristics. About The Team ABOUT Davenport Works Davenport Works is the country's largest aluminum rolling mill, it was opened in 1948 and currently employs more than 2,000 people and ships product worldwide. It is in Riverdale in the Quad Cities (Davenport and Bettendorf in southeastern Iowa, and Rock Island and Moline in northwestern Illinois). The Quad Cities is 3 hours south-west of Chicago, 4 hours north of St. Louis, and less than 3 hours from Des Moines. The Quad Cities is home to St. Ambrose University among 8 educational institutes. Major outdoor summer music festivals include the Bix Beiderbecke Memorial Jazz Festival, Mississippi Valley Blues Festival, and River Roots Live.

Job Summary/Overview The Electrical Engineer plans and designs product applications based on customer requirements and needs. The position is responsible for organizing complex components and assemblies for the design, development, implementation, and maintenance of engineered products. Essential Duties and Responsibilities Responsible for performing engineering assignments with clear and specified objectives. Responsible for generating bills of materials for all product designs utilizing conventional types of plans and specifications. Responsible for generating wiring schematics and control cabinet layouts for hoist equipment. Performs design calculations and prepares equipment or material specifications. Creates/describes design procedures and specifications leading to construction documents. Estimates production times and related costs to provide information for management/commercial decisions. Responsible for supporting the Operations Team by developing manufacturing processes by designing and modifying equipment for building, assembling, and installing components. Transitions products from product development to production. Support other functions (Quality, Sales, etc.) in order to satisfy customer needs and resolve issues. Performs other related duties as assigned. Knowledge, Skills, Competencies, and Abilities Ability to create designs using relevant design software. Assures system and product quality by designing testing methods; testing finished product and system capabilities; confirming assembly and installation processes. Prepares product reports by collecting, analyzing, and summarizing information and trends. Ability to work in a fast-paced, highly productive environment where projects and direction can change quickly while creating thorough and detailed designs and documentation. Skilled in interpreting a variety of instructions furnished in written, oral, diagram or scheduled form. Demonstrate ability to effectively communicate in individual and group settings. Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies. Understanding of National Electric Code (NEC) and other related electrical design specifications. Required Qualifications Bachelor's degree in Electrical Engineering from an ABET accredited university and/or equivalent combination of education and experience Minimum 3 years design experience required. AutoCAD and/or Solidworks experience required. Experience with electro-mechanical systems or hoists desired. About Columbus McKinnon: Columbus McKinnon is a leading worldwide designer, manufacturer and marketer of intelligent motion solutions that move the world forward and improve lives by efficiently and ergonomically moving, lifting, positioning and securing materials. Key products include hoists, crane components, precision conveyor systems, rigging tools, light rail workstations and digital power and motion control systems. We are focused on commercial and industrial applications that require the safety and quality provided by our superior design and engineering know-how. Columbus McKinnon is a publicly traded company that has been in business for almost 150 years - proud of our heritage, where we come from, and where we're going. As Columbus McKinnon grows globally, so does our need for driven and inspired employees. Join our winning team! Columbus McKinnon Corporation promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all associates and work hard to maintain a Drug Free Workplace.

Job Description: Electrical Engineer/Designer (EED) Company and BG Description: Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Mobility, Automation, and Infrastructure. Position Purpose: In this Electrical Engineer/Designer role, you will design, develop, and oversee electrical systems and components to ensure they function safely, efficiently, and in accordance with specifications and regulations. The position will be responsible for designing electrical systems for building, infrastructure, machines, or products, ensuring the functionality, safety and compliance, and developing layouts schematics, specifications, and bill of materials for power distribution and control systems. Job Objectives (How and When) Major Responsibilities/KPIs Deliverables Design & Technical Execution Complete electrical design packages for projects and/or products Maintain compliance with relevant industry standards and client specifications Minimal design-related change orders Project Management & Delivery Deliver all assigned electrical design milestones on or ahead of schedule Maintain minimal budget deviation on electrical design hours Cross-functional Collaboration Lead/participate in ensuring design alignment with architectural, structural, and mechanical systems Improve cross-discipline coordination by developing and implementing a standardized electrical design checklist Professional Development Continued education in electrical engineering topics and standards Obtain/maintain electrical certifications Mentor others in core electrical design methodologies Innovation & Process Improvement Identify and implement software, tools, and/or workflow that improves role efficiency Standardize on designs by creating reuse templates Key Competencies: Electrical Design Proficiency Strong understanding of power distribution, lighting, grounding, panel schedules, and control systems. Skilled in CAD/BIM software (AutoCAD, Revit, EPLAN, etc.). Proficient in performing load calculations, voltage drop, short circuit, and coordination studies. Code Compliance & Safety Deep knowledge of NEC, IEEE, IEC, NFPA, and local building codes. Designs systems that prioritize safety, reliability, and code adherence. Project Management Capable of managing design timelines, budgets, and deliverables. Prioritizes tasks, meets milestones, and communicates progress effectively. Technical Documentation Produces clear, detailed, and accurate construction documents, specifications, and reports. Ensures documentation supports permitting, installation, and inspection processes. Key Behaviors: Detail-Oriented Reviews designs thoroughly to prevent errors and minimize rework. Checks for consistency and constructability in electrical layouts. Collaborative Works effectively with cross-disciplinary teams (mechanical, architectural, civil). Accepts feedback and coordinates to avoid design conflicts. Analytical Thinking Diagnoses problems logically and develops engineering solutions. Uses data and simulation tools to support design decisions. Adaptability Responds effectively to changing project requirements or new technologies. Embraces continuous learning and process improvement. Core Strengths: Problem Solving Quickly identifies and resolves design, installation, or system integration challenges. Communication Skills Explains complex technical details to non-engineers (e.g., clients, stakeholders). Writes clear reports and presents confidently in meetings. Time Management Balances multiple projects and deadlines without sacrificing quality. Innovation Implements new design methods or tools to improve efficiency and sustainability. Duties/Responsibilities: Electrical System Design Design power distribution, data, and other low-voltage systems. Develop single-line diagrams, panel schedules, wiring diagrams, and load calculations. Select electrical equipment and components based on technical and cost considerations. Construction Documentation Prepare detailed electrical construction drawings using AutoCAD or similar software. Create technical specifications and scopes of work for bidding and construction. Ensure designs comply with local/industrial codes (NEC, NFPA, IEEE, IEC, UL508A) and project standards. Project Coordination Coordinate with other disciplines (mechanical, structural, architectural) to avoid conflicts. Attend design and project meetings, providing input on electrical aspects. Respond to Requests for Information (RFIs), submittals, and shop drawing reviews during construction. Site Visits and Inspections Conduct site assessments to gather existing conditions and verify installations. Perform construction inspections to ensure compliance with design intent. Support commissioning and troubleshooting of electrical systems. Code Compliance and Quality Assurance Stay current with updates to electrical codes, safety regulations, and industry standards. Review and validate electrical designs for quality, functionality, and constructability. Project and Team Support Assist in developing project schedules and estimating design time and costs. Support engineers in preparing reports, technical memos, and client presentations. Mentor junior staff or designers and provide peer reviews. Sustainability and Innovation Integrate energy-efficient and sustainable design practices. Research and propose new materials, technologies, or approaches that improve performance and reduce costs. Qualifications: Education & Certifications Bachelor's degree in Electrical Engineering or a related field and/or Associate degree or technical diploma in electrical design or drafting Engineer-in-Training (EIT) or FE certification (optional). Professional Engineer (PE) license (optional). Technical Skills & Software Proficiency Proficiency in AutoCAD, Revit MEP, and/or EPLAN for electrical drafting and modeling. Strong grasp of National Electrical Code (NEC) and relevant standards (e.g., IEEE, NFPA, IEC) and/or industrial panel standards (UL508A). Understanding of low-voltage systems, grounding, circuit protection, and control systems. Experience 0-2 years for entry-level or junior designer roles. 3-7 years for mid-level or project engineer/designer roles. 8+ years for senior engineer/designer or lead roles Soft Skills & Attributes Strong communication skills - written and verbal. Excellent attention to detail and quality assurance. Ability to manage time and meet deadlines across multiple projects. Team-oriented with good coordination and collaboration skills. Problem-solving mindset with a focus on practical, buildable solutions.

We are seeking a detail-oriented and analytical Ferrite Engineer to join our team in Salisbury, United States. In this role, you will be responsible for designing, developing, and optimizing ferrite-based components and systems for various applications in electronics and telecommunications. Design and develop ferrite-based components and systems for RF and microwave applications Conduct material characterization and performance analysis of ferrite materials Utilize computer-aided design (CAD) software to model and simulate ferrite components Collaborate with cross-functional teams to integrate ferrite solutions into larger systems Analyze and solve complex electromagnetic problems related to ferrite applications Optimize ferrite designs for performance, cost, and manufacturability Stay up-to-date with the latest advancements in ferrite materials and technologies Prepare technical reports and present findings to stakeholders Contribute to patent applications and technical publications as needed Qualification s Bachelor's degree in Materials Science, Electrical Engineering, or related field; Master's degree preferr ed5+ years of experience in ferrite engineering or related fie ld Expertise in ferrite materials and their applications in electronics and telecommunicatio ns Strong knowledge of electromagnetic theory and RF/microwave engineering principl es Proficiency in material characterization techniques and analys is Experience with computer-aided design (CAD) software for component modeling and simulati on Excellent problem-solving skills and attention to deta il Strong analytical and organizational abiliti es Effective communication skills, both written and verb al Ability to work efficiently in a fast-paced, collaborative environme nt

Fathom Recruitment has teamed up with C-Motive to bring you another great opportunity! Are you a motor controls expert looking for an opportunity to innovate and put your hands on a world-changing technology? C-Motive, a startup in Middleton, Wisconsin, is seeking a Motor Controls Engineer to join our rapidly expanding team. In this newly created role, you would assist C-Motive in commercializing a patented electrostatic motor technology with a focus on sustainability and efficiency. This technology, which was developed at UW-Madison, is projected to be the first of its kind on the market and has the potential to save a gigaton of carbon in the next decade. The Motor Controls Engineer will be responsible for architecting and developing the control systems for C-Motive's electrostatic motor drives. This role requires a strong background in linear systems analysis and controller design, along with proficiency in tools like MATLAB/Simulink. With this role, you will have the opportunity to collaborate with hardware and software teams to integrate motor control solutions into larger motor/drive systems. What you will do: Develop control algorithms, write embedded firmware in C/C++, and create simulation models. Perform bench and in-vehicle testing and troubleshoot system issues. Write, test, and debug embedded C/C++ code for motor controllers and Electronic Speed Controllers (ESCs). Develop performance models in MATLAB/Simulink to simulate and analyze motor and system performance. Who you are: A master's or PhD in electrical engineering/computer science with an emphasis on machine and power electronics control systems is required. The ideal candidate will have at least 10 years of experience in high-performance motor and/or multilevel power converter control systems. A strong understanding of AC and DC motor types, drive systems, and control theory is necessary. Experience with PID loop control strategies and knowledge of PWM (Pulse Width Modulation) schemes are important. The candidate should have hands-on experience with closed-loop vector control, whether sensor-based or sensorless. Past design experience implementing motor control strategies for various motor types, such as Fuzzy Logic Control (FLC) or Field-Oriented Control (FOC), is also desired. Why work with us: C-Motive offers a generous benefits package, including a "take-what-you-need" paid time off program, paid parental leave, a 401k program, and stock options. The company is an equal opportunity employer committed to creating an inclusive and diverse environment. Relocation assistance is also available. Our complete job description can be found HERE Fathom Recruitment and our clients adhere to an equal employment opportunity policy. All candidates are referred based on their qualifications only, without regard for their race, sex, age, religion, national origin, sexual orientation, marital status, veteran status, or any other protected class or characteristic.

The Senior Electrical Reliability Engineer is responsible for supporting the operation, maintenance, and reliability of electrical equipment and infrastructure at the Celanese Pensacola Plant. Additional responsibilities include managing the development, updating, and implementation of equipment strategies, identifying and justifying equipment upgrade opportunities, supporting facilities improvement projects, and stewarding the site safe electrical work practices. Electrical equipment at the site includes AC and DC motors and motor controls, VFD's, DC drives, medium and low voltage power circuit breakers and switchgear, and power distribution systems at the 480V and 15kV levels. Responsibilities: Primary Functions Work in a team environment with other engineering disciplines, operations, and mechanical personnel Ensure safe, cost effective, operable electrical equipment and associated systems are provided and maintained to meet current business unit needs Specify new electrical equipment to comply with industry and company design practices Provide assistance in the field during plant start-ups, shutdowns or upsets as needed Provide troubleshooting assistance for plant electrical installations Provide quality control during maintenance outages for electrical equipment Manage the development, updating, and implementation of equipment strategies for electrical equipment Lead electrical infrastructure plan development and improvements Drive electrical infrastructure improvement projects and steward recommendations to site management team Provide technical support for front-end development, cost estimation, design, construction, and startup for projects, change packages, and turnarounds Develop/review electrical contractor work scopes while incorporating site best practices and standards Ensure all projects and repairs meet local codes and regulations i.e. IEEE, NFPA 70E, NEC etc. Willing to be available outside of normal working hours to occasionally serve as technical consultant Translate technical problems into business risk while communicating a case for action for mitigations or proposed solutions Assists in the development of maintenance / operating procedures and technician training Provide Root Cause Failure Analysis expertise and support as needed for equipment failures Required Qualifications Bachelor of Science degree in Electrical Engineering from an accredited university At least 7 years of electrical engineering experience in a manufacturing environment Experience with IEEE, National Electrical Code (NEC), OSHA standards Experience with industrial plant electrical power distribution systems at 480V and 15kV levels Experience with medium voltage and low voltage power circuit breakers and switchgear Root Cause Failure Analysis training / experience Experience with Management of Change (MOC) in a manufacturing environment Preferred Knowledge / Skills / Experience High level of knowledge on NFPA 70E Electrical Safe Working Practices Strong knowledge of AC/DC motors and motor controls Ability to design, program and troubleshoot AC Variable Frequency Drives (VFD) Knowledgeable on electrical power system studies, with demonstrated ability to interpret load flow, short circuit and arc flash studies and follow-through on study recommendations Thorough understanding of electrical single line diagrams and ability to update as needed Strong analytical & troubleshooting skills. Excellent verbal and written communications skills with the ability to communicate effectively to all levels of an organization and maintain productive vendor relationships Knowledge of basic economics and justification calculations Celanese is a global leader in chemistry, producing specialty material solutions used across most major industries and consumer applications. Our businesses use our chemistry, technology and commercial expertise to create value for our customers, employees and shareholders. We support sustainability by responsibly managing the materials we create and growing our portfolio of sustainable products to meet customer and societal demand. We strive to make a positive impact in our communities and to foster inclusivity across our teams. Celanese Corporation employs more than 11,000 employees worldwide with 2024 net sales of $10.3 billion. For more information about Celanese Corporation and its product offerings, visit *****************

Lead Hardware Engineering SEC is seeking a strategic and technically strong Lead Hardware Engineering Leader to oversee the development of ruggedized electronics, displays, and computing systems for mission critical defense and aerospace programs. This role owns the full hardware development lifecycle from concept and design through production while ensuring all solutions meet rigorous performance, reliability, and regulatory requirements. The ideal candidate brings deep expertise in electronic hardware design, a proven track record leading high performing engineering teams, and a commitment to driving innovation in high reliability, high stakes environments. Responsibilities:Lead the design, development, analysis, and validation of complex digital, analog, mixed?signal, and power electronics for ruggedized computing and display platforms. Provide technical leadership and hands?on contributions across circuit architecture, PCB layout, signal integrity, thermal analysis, component selection, and qualification testing. Ensure compliance with all applicable environmental and electrical standards, including MIL?STD?810, MIL?STD?461, DO?160, and program?specific customer requirements. Partner closely with Mechanical, Software, Systems, Test, and Manufacturing Engineering teams to deliver integrated, optimized system?level solutions. Establish, reinforce, and continuously improve engineering best practices, including structured design reviews, documentation standards, configuration control, and quality processes. Mentor, coach, and develop engineering staff; support succession planning and skills development across the department. Act as the senior hardware technical authority for proposals, product roadmaps, technology insertions, and key customer engagements. Manage project plans, resource assignments, risk mitigation, and department budgets to meet organizational and program objectives. Support production transition activities, including root?cause analysis, corrective actions, and supplier engagement to resolve technical issues. Qualifications:Demonstrated expertise in high-speed digital circuit design, power supply architecture, and embedded hardware development. In-depth knowledge of ruggedization techniques, thermal management strategies, and EMI/EMC mitigation practices. Proficient in industry-standard design tools such as Altium Designer, OrCAD, or equivalent ECAD platforms. Strong familiarity with relevant environmental and electrical compliance standards, including MIL-STD-810, MIL-STD-461, and DO-160. Demonstrated success in leading cross-functional engineering teams and managing complex projects within multidisciplinary development environments, utilizing New Product Introduction (NPI) phase gate processes. Bachelor's degree in Electrical Engineering or a related field is required; Master's degree is preferred. Minimum of 10 years of experience in hardware design and development, with at least 3 years in a leadership capacity. Experience within the defense, aerospace, and/or rugged electronics sectors is highly desirable. U.S. citizenship or lawful immigration status required, and eligibility to obtain a security clearance may be required. Strategic and technically proficient: Effectively balances long-term vision with hands-on engineering leadership. Collaborative and communicative: Cultivates strong relationships across internal teams and external stakeholders to drive alignment and success. Detail-oriented and disciplined: Upholds rigorous standards for design quality, documentation, and process adherence. Mentorship-driven: Committed to developing talent and fostering a culture of continuous technical excellence. Mission-focused: Dedicated to delivering reliable, high-performance systems that support critical operations.

Responsibilities and Measurement Criteria with Time investment Needed on Each: (This will describe the overall core responsibilities of the role, decision making responsibilities etc.) Design and development of UPS subsystems/components in compliance with specifications, EMC/EMI requirements, and applicable standards. PCB design. Detailed analysis of UPS electronic subsystems/components, focusing on performance evaluation, design optimization, component selection and sizing, and control strategy. Collaboration in an interdisciplinary engineering environment (with embedded, test, and mechanical engineers) to define requirements, discuss trade-offs, participate in design verification, and ensure successful integration of single-phase UPS designs. Continuous improvement of existing designs, evaluation of application issues, and resolution of those issues in the design of new products. Evaluation of new technologies to enhance and implement them in new R&D systems and processes. Adherence to agreed-upon project timelines. Preparation of relevant technical reports. Qualifications: Required/ Minimum Qualifications: Master's degree or higher in Electrical Engineering with a focus on power electronics. Proficiency in medium-to-low power circuit topologies, principles of power electronic converters, and semiconductor devices. Additional / Preferred Qualifications: - Hands-on experience with PCB design and layout. Knowledge of electronic design practices for EMC compliance. Strong analytical skills combined with excellent problem-solving abilities and interpersonal communication. Experience in UPS and power module development is highly desirable. Physical & Environmental Requirements: - (To be used majorly for manufacturing jobs.) None Time Travel Needed: 10% OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #LI-CM1

Balance Technology Inc. (BTI) - a leading manufacturer of precision measurement and testing equipment - is seeking a sharp-minded, talented, and motivated Mechatronics Technician to join our growing team. In this role, you'll work hands-on with complex automated machinery, integrating mechanical, electrical, and control systems to ensure performance, precision, and reliability. What You'll Do Read and interpret electrical, mechanical, and pneumatic drawings. Work with Programmable Logic Controllers (PLCs) - Allen-Bradley, Siemens Step7/TIA Portal. Configure and troubleshoot HMIs, VFD motor control, servo motion control, and robot interfaces (ABB, FANUC, EPSON). Integrate and maintain safety controllers (GuardLogix, PILZ, ProfiSafe) and fieldbus networks (DeviceNet, Ethernet/IP, ProfiNet, ProfiBus). Use multimeters, oscilloscopes, and other test equipment for debugging and validation. Coordinate machine debug, power-up, and system validation at BTI and customer sites. Install and repair industrial electronic systems and I/O networks for automated control systems. Additional Experience (Preferred): Geometric Dimensioning & Tolerancing (GD&T) Precision Measurement and Test Systems What You'll Bring Two-year technical degree (Computer, Electronics, or Mechatronics preferred). 2+ years of relevant hands-on experience with industrial or automation systems. Strong analytical and problem-solving skills with attention to detail. Excellent written and verbal communication and sound judgment. A self-starter who thrives in a fast-paced environment. Willingness to travel up to 75% (domestic and international). About Balance Technology Inc. (BTI) Headquartered near Ann Arbor, Michigan, BTI designs and manufactures custom-built precision measurement and testing equipment, including: Balancers Dimensional Gages PC Upgrades Custom Test Systems Benefits 401(k) with company match Health, dental, and life insurance Flexible spending account Paid time off Flexible schedule Requirements Electrical wiring: 2 years (Required) Mechanical assembly: 2 years (Required) Ability to commute to Whitmore Lake, MI (48189) If you're a driven technician who enjoys solving complex challenges and working with advanced automation systems, we'd love to hear from you.

The Project Engineer in this role is responsible for planning, developing, coordinating, and managing onsite construction engineering activities for large, extensive projects in the heavy civil/power construction industry, encompassing grading, clearing, and site development. Essential Duties and Responsibilities: Track project quantities Generate project billing. Initiate and negotiate change orders. Generate CAD drawings and present solutions to owners for design problems that arise in the field. Review plan changes Assist with work plans. Assist with project schedules. Manage submittal data. Manage material purchase orders. Manage and negotiate subcontracts. Assist in division field personnel management. Assist field personnel in any capacity to handle any problems that may arise. Work with Project Superintendents, Foreman, and Crews to perform work more effectively. Attend pre-construction meetings. Requirements: Must be willing to relocate. Strong organizational skills Strong work ethic Able to multitask and work independently under pressure and tight deadlines. Education and Experience: Four-year engineering degree or equivalent technical training and related experience Excellent communication and interpersonal skills Demonstrated ability to manage a team of varied disciplines. Candidates that accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam is essential to ensure that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process.

We are a leading manufacturer of precision measurement and testing equipment, and we are looking for a Controls Hardware Engineer to join our growing team. If you enjoy designing, detailing, and seeing your work come to life in real machines, we want to hear from you! Who We're Looking For: 2+ years of experience designing industrial control systems, preferably for custom machinery or automation systems Proficient in EPLAN (preferred) and/or AutoCAD Electrical for control panel and schematic design Experience designing electrical, pneumatic, hydraulic, and other power delivery systems Familiar with UL, NFPA79, or IEC standards for industrial control panels Comfortable collaborating with mechanical and software teams during the machine design lifecycle Experience with machine wiring, hardware selection, and bills of material is a plus Knowledge of PLCs, HMIs, sensors, and VFDs is helpful but not required Preferred (but not required): Technical degree in Electrical Engineering, Mechatronics, or similar Experience supporting machine builds or troubleshooting wiring in the field Exposure to machine safety design, lockout/tagout systems, or risk assessments Job Duties: Design control panels, schematics, and system layouts using EPLAN (preferred) and/or AutoCAD Electrical Create electrical, pneumatic, and hydraulic diagrams to support custom machine builds Select components including fuses, breakers, relays, valves, and sensors based on application and standards Collaborate with mechanical and controls engineers to ensure seamless system integration Provide support during machine builds, wiring checks, and commissioning Maintain up-to-date documentation and BOMs throughout the project lifecycle What We Value: Precision and clarity in your design work Practical understanding of how systems are built and wired on the shop floor Proactive problem-solving and attention to detail Clear communication with team members and vendors Pride in delivering reliable, build-ready documentation Why You'll Like Working Here: Small, skilled team where your contributions matter Interesting, custom machine projects-not the same thing every day Opportunity to grow into system-level design or multi-disciplinary engineering Apply Today! Send your resume - and if you have a sample drawing set or project portfolio, even better. We'd love to hear about the machines and systems you've helped bring to life.

Leeds Professional Resources (A leader in Construction Recruitment) is working with a leading mechanical contractor specializing in commercial HVAC, plumbing, and piping systems. We deliver high-quality mechanical solutions for projects in healthcare, education, industrial, and commercial markets. Our team is dedicated to safety, precision, and exceptional client service. Position Overview: We are seeking a motivated Commercial Project Engineer to support our project management and field operations teams. The ideal candidate will have 1-2 years of experience working with either a commercial general contractor or a mechanical contractor. This role offers an excellent opportunity to grow into project management within the commercial mechanical industry. Key Responsibilities: Assist Project Managers with the planning, scheduling, and coordination of mechanical construction projects. Review project plans, specifications, and submittals to ensure compliance and accuracy. Track and document RFIs, submittals, change orders, and material procurement. Support project budgeting, cost tracking, and schedule management. Coordinate with field teams, subcontractors, and vendors to ensure smooth project execution. Assist in project closeout activities, including punch list completion and documentation. Participate in on-site meetings and provide technical support as needed. Qualifications: Bachelor's degree in Mechanical Engineering, Construction Management, or a related field (preferred). 1-2 years of experience working with a commercial general contractor or commercial mechanical contractor. Basic understanding of mechanical systems (HVAC, plumbing, piping). Strong communication and organizational skills. Proficiency in Microsoft Office and construction management software (e.g., Bluebeam, Procore, or similar). Detail-oriented with the ability to handle multiple tasks in a fast-paced environment.