Grinder Chipper

Top Grinder Chipper Skills

Below we've compiled a list of the most important skills for a Grinder Chipper. We ranked the top skills based on the percentage of Grinder Chipper resumes they appeared on. For example, 25.8% of Grinder Chipper resumes contained Steel Castings as a skill. Let's find out what skills a Grinder Chipper actually needs in order to be successful in the workplace.

The six most common skills found on Grinder Chipper resumes in 2020. Read below to see the full list.

1. Steel Castings

high Demand
Here's how Steel Castings is used in Grinder Chipper jobs:
  • Worked on steel castings with the use of air powered tools in order for them to pass inspection.
  • Groomed steel castings using air powered tools in order to pass inspection

Show More

2. Safety Procedures

high Demand
Here's how Safety Procedures is used in Grinder Chipper jobs:
  • Maintained workplace safety and followed established safety procedures.
  • Delivered the finishing work on metal castings.Operated grinders and chippers, following all safety procedures.

Show More

3. Hand Tools

high Demand
Here's how Hand Tools is used in Grinder Chipper jobs:
  • Load and adjust work pieces onto equipment and work tables, using hand tools.
  • Remove and replace worn or broken machine parts, using hand tools..
  • Chip and grind steel castings by hand tools according to standardized work order.
  • Used hand tools to grind, sand, clean and buff.
  • Trim, scrape, or deburr objects or parts, using chisels, scrapers, and other hand tools and equipment.
  • File or finish surfaces of workpieces, using prescribed hand tools..

Show More

4. Air Hammers

high Demand

5. Engine Blocks

high Demand
Here's how Engine Blocks is used in Grinder Chipper jobs:
  • Chip and grind slag iron and sand from engine blocks and heads using air tools.
  • Used chipping and grinding tools on unfinished machined Cat engine blocks

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. Final Inspection

high Demand

7. Excess Material

high Demand
Here's how Excess Material is used in Grinder Chipper jobs:
  • Removed excess material or burrs from surfaces by trimming and scraping.
  • Removed excess material from metal as specified by job orders.

Show More

8. PPE

high Demand
Here's how PPE is used in Grinder Chipper jobs:
  • Chipped weld splatter, high spots, burrs, slag, and rust from surface of fabricated metal structures and parts.
  • Worked in the steel industry for 30 years, started out as a grinder/chipper at united welding and manufacturing.
  • Used tools to clear sand and excess metal from parts to be shipped to the consumer.
  • Lift upper mold sections from lower sections and remove molded patterns.
  • Chipped and ground slag from steel material.
  • Operate loaders and Chipper on a log yard
  • Chipped castings 5 years experience on stand grinder
  • Stopped machines to make required adjustments.
  • Roll pipe and a chipper/grinder.
  • Chipped and grinded diesel engine blocks and hub assembly's items before they were painted and shipped.
  • Position castings manually, or by crane operator to be chipped, and grinded for production.
  • Chipped and grinded high spots and ridges; Loaded and unloaded equipment up to 80 pounds.
  • Chipped and grind lumps and fins off railroad castings,overhead crane operator.
  • Upgraded to Class A chipper, highest standard.
  • Chipped and grinded welding slack from metal castings
  • Clean up,brush chipper, chipper operator
  • Chipped/Grinded heavy truck parts for customers.
  • Chipped and grinded sheet metal.
  • Babbitt pourer for chipper knives General machine maintenance
  • chipped and grinded off access metal on finished product

Show More

9. Rough Spots

high Demand
Here's how Rough Spots is used in Grinder Chipper jobs:
  • Removed rough spots from work pieces with portable grinders, hand files and scrapers.
  • Remove outer casting and grind rough spots smooth

Show More

10. Aerospace Machine Parts

high Demand

11. Excess Stock

average Demand
Here's how Excess Stock is used in Grinder Chipper jobs:
  • Use portable and pedestal grinder to remove excess stock from metal.

Show More

12. Osha

average Demand
Here's how Osha is used in Grinder Chipper jobs:
  • Follow OSHA guidelines on a daily basis and practice good safety.

Show More

13. Side Frames

average Demand

14. Heavy Equipment

average Demand
Here's how Heavy Equipment is used in Grinder Chipper jobs:
  • Trained new employees on job duties working with heavy equipment and materials that could kill you in extreme weather.

Show More

15. Excess Sand

average Demand
Here's how Excess Sand is used in Grinder Chipper jobs:
  • Cleaned excess sand and iron on tractor parts after the foundry process.
  • Chipped and grinded risers and any excess sand that were on the parts coming from the core room

Show More

16. Process Sheets

average Demand

17. Different Activities

average Demand
Here's how Different Activities is used in Grinder Chipper jobs:
  • Follow process sheets as completing different activities.

Show More

18. Safety Meetings

average Demand

19. Surfaces Accessible

average Demand
Here's how Surfaces Accessible is used in Grinder Chipper jobs:
  • Roll or turn castings when necessary to make surfaces accessible.

Show More

20. Sharp Edges

average Demand

21. Product Numbers

low Demand

22. Inventory Control

low Demand
Here's how Inventory Control is used in Grinder Chipper jobs:
  • Assisted with inventory control during plant shut-down.

Show More

23. Different Parts

low Demand

24. Machine Shop

low Demand
Here's how Machine Shop is used in Grinder Chipper jobs:
  • Chip or grind castings to prepare parts for foundry machine shop

Show More

25. Machine Operation

low Demand

26. Bobcat

low Demand

27. RAN

low Demand
Here's how RAN is used in Grinder Chipper jobs:
  • Ensured integrity of appearance of all assigned production welding.
  • Observed dumping of chips into receiving pit and started conveyor used to transfer chips to screening and storage areas.
  • Used machinery tools such as hammer drills, 8 inch grinders, and chain and lifts and cranes.
  • Operated hoists, cranes and power tools to dismantle equipment to find and remove defective parts.
  • Chip and Grind-Chipping and grinding steel parts for trains-Operating crane moving parts-Assuring gauges fit parts properly
  • Operated forklift and skid loader for transporting process iron to be evaluated for painting.
  • Hooked large metal structures to overhead cranes being carried along the foundry.
  • Certified Crane Operator, rated at a 20-ton capacity overhead crane.
  • Positioned work piece on worktable manually and using jib and crane.
  • Loaded and hauled away debris, branches and tree stumps.
  • Operated overhead crane, forklift and backhoe.
  • Worked with different equipment such as; Air Arc Booth,Furnace Operator, Cutting Torch, Forklift, Overhead Crane operator
  • Grinded, polished, and processed all assigned metal parts to specified tolerances.
  • Chip up tree branches and limbsThan stack 30-50 pound logs
  • Utilized grinding tools and operated machinery Processed iron for packing and shipping Operated forklift and skid loader to transport metals
  • Tow Motor Shipping/Receiving Crane Operator Grinding Wheel
  • worked with alot of caterpiller part's, such as crankshafts, rollers, links and more.

Show More

28. Chain Saw Blade

low Demand
Here's how Chain Saw Blade is used in Grinder Chipper jobs:
  • Stabilized roadway and billboard by removing dangerous high leaning trees or smothering brush Chain Saw Blade Sharpening & Maintenance.

Show More

29. Top Priority

low Demand

30. Rail Cars

low Demand

31. Hand Files

low Demand

32. Assembly Line

low Demand

33. Job Orders

low Demand

34. Rough Edges

low Demand
Here's how Rough Edges is used in Grinder Chipper jobs:
  • Chipped excess metal and debris from metal castings Ground off rough edges from metal castings Smoothed metal surfaces by hand sanding

Show More

35. Tree Removal

low Demand
Here's how Tree Removal is used in Grinder Chipper jobs:
  • Point Pleasant, NJ *Responsible for tree removal, trimming, topping and pruning.

Show More

20 Most Common Skill for a Grinder Chipper

Steel Castings30%
Safety Procedures13.9%
Hand Tools12.2%
Air Hammers7.9%
Engine Blocks5.9%
Final Inspection4.3%
Excess Material3.6%
PPE3%

Typical Skill-Sets Required For A Grinder Chipper

RankSkillPercentage of ResumesPercentage
1
1
Steel Castings
Steel Castings
25.8%
25.8%
2
2
Safety Procedures
Safety Procedures
11.9%
11.9%
3
3
Hand Tools
Hand Tools
10.5%
10.5%
4
4
Air Hammers
Air Hammers
6.8%
6.8%
5
5
Engine Blocks
Engine Blocks
5.1%
5.1%
6
6
Final Inspection
Final Inspection
3.7%
3.7%
7
7
Excess Material
Excess Material
3.1%
3.1%
8
8
PPE
PPE
2.5%
2.5%
9
9
Rough Spots
Rough Spots
2%
2%
10
10
Aerospace Machine Parts
Aerospace Machine Parts
1.7%
1.7%
11
11
Excess Stock
Excess Stock
1.7%
1.7%
12
12
Osha
Osha
1.4%
1.4%
13
13
Side Frames
Side Frames
1.4%
1.4%
14
14
Heavy Equipment
Heavy Equipment
1.4%
1.4%
15
15
Excess Sand
Excess Sand
1.1%
1.1%
16
16
Process Sheets
Process Sheets
1.1%
1.1%
17
17
Different Activities
Different Activities
1.1%
1.1%
18
18
Safety Meetings
Safety Meetings
1.1%
1.1%
19
19
Surfaces Accessible
Surfaces Accessible
1.1%
1.1%
20
20
Sharp Edges
Sharp Edges
1.1%
1.1%
21
21
Product Numbers
Product Numbers
1.1%
1.1%
22
22
Inventory Control
Inventory Control
1.1%
1.1%
23
23
Different Parts
Different Parts
1.1%
1.1%
24
24
Machine Shop
Machine Shop
1.1%
1.1%
25
25
Machine Operation
Machine Operation
1.1%
1.1%
26
26
Bobcat
Bobcat
0.8%
0.8%
27
27
RAN
RAN
0.8%
0.8%
28
28
Chain Saw Blade
Chain Saw Blade
0.8%
0.8%
29
29
Top Priority
Top Priority
0.8%
0.8%
30
30
Rail Cars
Rail Cars
0.8%
0.8%
31
31
Hand Files
Hand Files
0.8%
0.8%
32
32
Assembly Line
Assembly Line
0.8%
0.8%
33
33
Job Orders
Job Orders
0.8%
0.8%
34
34
Rough Edges
Rough Edges
0.8%
0.8%
35
35
Tree Removal
Tree Removal
0.8%
0.8%

205 Grinder Chipper Jobs

Where do you want to work?