Electrical Engineer jobs at Gulfstream Aerospace

Description: Hybrid Role: 2-3 days in Office Remote OK but preferably in PST time zone. Interview - Phone Interview followed by (2) MS Teams technical interviews. Candidate needs to be on Camera Top Must Have Skills: - Solid minimum 8 + years Design Verification Experience - Verification Experience with DDR5 Controller /PHY - System Verilog /UVM - Language Skills THE ROLE: We are looking for an adaptive, self-motivative Design Verification Engineer to join our growing team. As a key contributor, you will be part of a leading team to drive and improve ***'s abilities to deliver the highest quality, industry-leading technologies to market. Be a part of a team that delivers Industry leading IP and help our experts in RTL, FW, circuit, and architecture teams develop leading edge and differentiating IPs. THE PERSON: You have a passion for modern, complex processor architecture, digital design, and verification in general. You are a team player who has excellent communication skills and experience collaborating with other engineers located in different sites/time zones. You have strong analytical and problem-solving skills and are willing to learn and ready to take on problems. KEY RESPONSIBILITIES: • Develop/Maintain tests for functional verification. • Build the directed and random verification tests, debug test failures to determine the root cause, work with RTL and firmware engineers to resolve design defects and correct any test issues. • Work on functional & code coverage verification. • Provide technical support to other teams PREFERRED EXPERIENCE: • Experience with C/C++ • Experience with Verilog, System Verilog, and modern verification libraries like UVM • 10+years of ASIC design verification experience • Experience / Background with DDR or Memory Controller. PHY Verification is a plus • Experience with scripting languages like Python, Perl and TCL is a plus. • Collaborate with architects, hardware engineers, and firmware engineers to understand the new features to be verified • Understanding of Design for Test methodologies and DFT verification experience is a plus • Proficient in debugging firmware and RTL code using simulation tools ACADEMIC CREDENTIALS: • Bachelor's or master's degree in computer engineering/Electrical Engineering

Fathom Recruitment has teamed up with C-Motive to bring you another great opportunity! Are you a motor controls expert looking for an opportunity to innovate and put your hands on a world-changing technology? C-Motive, a startup in Middleton, Wisconsin, is seeking a Motor Controls Engineer to join our rapidly expanding team. In this newly created role, you would assist C-Motive in commercializing a patented electrostatic motor technology with a focus on sustainability and efficiency. This technology, which was developed at UW-Madison, is projected to be the first of its kind on the market and has the potential to save a gigaton of carbon in the next decade. The Motor Controls Engineer will be responsible for architecting and developing the control systems for C-Motive's electrostatic motor drives. This role requires a strong background in linear systems analysis and controller design, along with proficiency in tools like MATLAB/Simulink. With this role, you will have the opportunity to collaborate with hardware and software teams to integrate motor control solutions into larger motor/drive systems. What you will do: Develop control algorithms, write embedded firmware in C/C++, and create simulation models. Perform bench and in-vehicle testing and troubleshoot system issues. Write, test, and debug embedded C/C++ code for motor controllers and Electronic Speed Controllers (ESCs). Develop performance models in MATLAB/Simulink to simulate and analyze motor and system performance. Who you are: A master's or PhD in electrical engineering/computer science with an emphasis on machine and power electronics control systems is required. The ideal candidate will have at least 10 years of experience in high-performance motor and/or multilevel power converter control systems. A strong understanding of AC and DC motor types, drive systems, and control theory is necessary. Experience with PID loop control strategies and knowledge of PWM (Pulse Width Modulation) schemes are important. The candidate should have hands-on experience with closed-loop vector control, whether sensor-based or sensorless. Past design experience implementing motor control strategies for various motor types, such as Fuzzy Logic Control (FLC) or Field-Oriented Control (FOC), is also desired. Why work with us: C-Motive offers a generous benefits package, including a "take-what-you-need" paid time off program, paid parental leave, a 401k program, and stock options. The company is an equal opportunity employer committed to creating an inclusive and diverse environment. Relocation assistance is also available. Our complete job description can be found HERE Fathom Recruitment and our clients adhere to an equal employment opportunity policy. All candidates are referred based on their qualifications only, without regard for their race, sex, age, religion, national origin, sexual orientation, marital status, veteran status, or any other protected class or characteristic.

The Senior Electrical Reliability Engineer is responsible for supporting the operation, maintenance, and reliability of electrical equipment and infrastructure at the Celanese Pensacola Plant. Additional responsibilities include managing the development, updating, and implementation of equipment strategies, identifying and justifying equipment upgrade opportunities, supporting facilities improvement projects, and stewarding the site safe electrical work practices. Electrical equipment at the site includes AC and DC motors and motor controls, VFD's, DC drives, medium and low voltage power circuit breakers and switchgear, and power distribution systems at the 480V and 15kV levels. Responsibilities: Primary Functions Work in a team environment with other engineering disciplines, operations, and mechanical personnel Ensure safe, cost effective, operable electrical equipment and associated systems are provided and maintained to meet current business unit needs Specify new electrical equipment to comply with industry and company design practices Provide assistance in the field during plant start-ups, shutdowns or upsets as needed Provide troubleshooting assistance for plant electrical installations Provide quality control during maintenance outages for electrical equipment Manage the development, updating, and implementation of equipment strategies for electrical equipment Lead electrical infrastructure plan development and improvements Drive electrical infrastructure improvement projects and steward recommendations to site management team Provide technical support for front-end development, cost estimation, design, construction, and startup for projects, change packages, and turnarounds Develop/review electrical contractor work scopes while incorporating site best practices and standards Ensure all projects and repairs meet local codes and regulations i.e. IEEE, NFPA 70E, NEC etc. Willing to be available outside of normal working hours to occasionally serve as technical consultant Translate technical problems into business risk while communicating a case for action for mitigations or proposed solutions Assists in the development of maintenance / operating procedures and technician training Provide Root Cause Failure Analysis expertise and support as needed for equipment failures Required Qualifications Bachelor of Science degree in Electrical Engineering from an accredited university At least 7 years of electrical engineering experience in a manufacturing environment Experience with IEEE, National Electrical Code (NEC), OSHA standards Experience with industrial plant electrical power distribution systems at 480V and 15kV levels Experience with medium voltage and low voltage power circuit breakers and switchgear Root Cause Failure Analysis training / experience Experience with Management of Change (MOC) in a manufacturing environment Preferred Knowledge / Skills / Experience High level of knowledge on NFPA 70E Electrical Safe Working Practices Strong knowledge of AC/DC motors and motor controls Ability to design, program and troubleshoot AC Variable Frequency Drives (VFD) Knowledgeable on electrical power system studies, with demonstrated ability to interpret load flow, short circuit and arc flash studies and follow-through on study recommendations Thorough understanding of electrical single line diagrams and ability to update as needed Strong analytical & troubleshooting skills. Excellent verbal and written communications skills with the ability to communicate effectively to all levels of an organization and maintain productive vendor relationships Knowledge of basic economics and justification calculations Celanese is a global leader in chemistry, producing specialty material solutions used across most major industries and consumer applications. Our businesses use our chemistry, technology and commercial expertise to create value for our customers, employees and shareholders. We support sustainability by responsibly managing the materials we create and growing our portfolio of sustainable products to meet customer and societal demand. We strive to make a positive impact in our communities and to foster inclusivity across our teams. Celanese Corporation employs more than 11,000 employees worldwide with 2024 net sales of $10.3 billion. For more information about Celanese Corporation and its product offerings, visit *****************

Lead Hardware Engineering SEC is seeking a strategic and technically strong Lead Hardware Engineering Leader to oversee the development of ruggedized electronics, displays, and computing systems for mission critical defense and aerospace programs. This role owns the full hardware development lifecycle from concept and design through production while ensuring all solutions meet rigorous performance, reliability, and regulatory requirements. The ideal candidate brings deep expertise in electronic hardware design, a proven track record leading high performing engineering teams, and a commitment to driving innovation in high reliability, high stakes environments. Responsibilities:Lead the design, development, analysis, and validation of complex digital, analog, mixed?signal, and power electronics for ruggedized computing and display platforms. Provide technical leadership and hands?on contributions across circuit architecture, PCB layout, signal integrity, thermal analysis, component selection, and qualification testing. Ensure compliance with all applicable environmental and electrical standards, including MIL?STD?810, MIL?STD?461, DO?160, and program?specific customer requirements. Partner closely with Mechanical, Software, Systems, Test, and Manufacturing Engineering teams to deliver integrated, optimized system?level solutions. Establish, reinforce, and continuously improve engineering best practices, including structured design reviews, documentation standards, configuration control, and quality processes. Mentor, coach, and develop engineering staff; support succession planning and skills development across the department. Act as the senior hardware technical authority for proposals, product roadmaps, technology insertions, and key customer engagements. Manage project plans, resource assignments, risk mitigation, and department budgets to meet organizational and program objectives. Support production transition activities, including root?cause analysis, corrective actions, and supplier engagement to resolve technical issues. Qualifications:Demonstrated expertise in high-speed digital circuit design, power supply architecture, and embedded hardware development. In-depth knowledge of ruggedization techniques, thermal management strategies, and EMI/EMC mitigation practices. Proficient in industry-standard design tools such as Altium Designer, OrCAD, or equivalent ECAD platforms. Strong familiarity with relevant environmental and electrical compliance standards, including MIL-STD-810, MIL-STD-461, and DO-160. Demonstrated success in leading cross-functional engineering teams and managing complex projects within multidisciplinary development environments, utilizing New Product Introduction (NPI) phase gate processes. Bachelor's degree in Electrical Engineering or a related field is required; Master's degree is preferred. Minimum of 10 years of experience in hardware design and development, with at least 3 years in a leadership capacity. Experience within the defense, aerospace, and/or rugged electronics sectors is highly desirable. U.S. citizenship or lawful immigration status required, and eligibility to obtain a security clearance may be required. Strategic and technically proficient: Effectively balances long-term vision with hands-on engineering leadership. Collaborative and communicative: Cultivates strong relationships across internal teams and external stakeholders to drive alignment and success. Detail-oriented and disciplined: Upholds rigorous standards for design quality, documentation, and process adherence. Mentorship-driven: Committed to developing talent and fostering a culture of continuous technical excellence. Mission-focused: Dedicated to delivering reliable, high-performance systems that support critical operations.

CMP Services seeks a Engineer IV (Electrical) - Sustainability to support LACCD at Los Angeles Community Collage District program. This position is bond-eligible and is strictly limited to work associated with capital construction, modernization, and sustainability projects as defined under the BuildLACCD Bond Program. Duties performed under this position shall not include routine maintenance, repair, or operational tasks that fall within the responsibilities of facilities Maintenance & Operations (M&O). The scope of this role is exclusively tied to bond-eligible activities such as planning, design, construction, commissioning, and related project management functions necessary to deliver capital improvements consistent with LACCD's Capital Construction Bond Program requirements and legal limitations governing bond fund expenditures. Duties: Lead and manage sustainability projects in accordance with District and program policies and procedures for College construction bond operations. Implement the electrification of central plants and other building systems outlined in the Board of trustees' Clean Energy Resolution passed in July 9, 2020. Apply knowledge of Sustainable Building Principles and Standards to assist with complex systemslevel issues. Support districtwide energy master planning, carbon reduction, grid resiliency, and electrification initiatives. Apply knowledge of energy and environmental sustainability approaches, such as LEED credits, and its related impacts to operational efficiency. Understand Title 24 and ASHRAE recommendations. Coordinate with multi-disciplinary teams in conjunction with Project Managers, to meet project requirements and timelines. Assist College Project Teams (CPT's) with technical issues that require second opinions i.e. peer review of Request For Clarifications (RFC's), Change Orders, etc. Travelling to and from project sites upon request of attending project and construction meetings. Involvement in all parts of the project life cycle, to include master planning, design, construction, and closeout. Perform electrical engineering analysis and technical reports supporting District design guidelines. Ensure integration of LED lighting systems, PV, BESS, EV charging, microgrids, and smart controls. Perform other related duties as assigned by the PMO and LACCD. Required Experience: Bachelor's Degree in in Electrical Engineering 10 or more years of professional electrical engineering experience in design, construction, or facilities infrastructure projects. Strong knowledge of California Energy Codes, Title 24 Energy Code, National Electrical Code (NEC),California Code of Regulations Part 11 (Cal Green Code) and applicable electrical engineering standards. Preferred Qualifications: 2 years' experience in Educational Facility Construction Experience and/or certification in Leadership in Energy and Environmental Design (LEED) certified projects and/or the Collaborative for High Performing Schools (CHPS) California Professional Engineering (PE) license in Electrical Engineering

The Project Engineer in this role is responsible for planning, developing, coordinating, and managing onsite construction engineering activities for large, extensive projects in the heavy civil/power construction industry, encompassing grading, clearing, and site development. Essential Duties and Responsibilities: Track project quantities Generate project billing. Initiate and negotiate change orders. Generate CAD drawings and present solutions to owners for design problems that arise in the field. Review plan changes Assist with work plans. Assist with project schedules. Manage submittal data. Manage material purchase orders. Manage and negotiate subcontracts. Assist in division field personnel management. Assist field personnel in any capacity to handle any problems that may arise. Work with Project Superintendents, Foreman, and Crews to perform work more effectively. Attend pre-construction meetings. Requirements: Must be willing to relocate. Strong organizational skills Strong work ethic Able to multitask and work independently under pressure and tight deadlines. Education and Experience: Four-year engineering degree or equivalent technical training and related experience Excellent communication and interpersonal skills Demonstrated ability to manage a team of varied disciplines. Candidates that accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam is essential to ensure that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process.

Requisition ID # 162167 Job Category: Engineering / Science Job Level: Individual Contributor Business Unit: Electric Engineering Work Type: Hybrid The Electric Engineering team ensures the delivery of safe and reliable electric service to our customers. Electric Engineering is responsible for PG&E's electric distribution and transmission operations, including planning, engineering, maintenance and construction, asset management, business planning, restoration, and emergency response. Position Summary This job is represented by Engineers and Scientists of California (ESC) subject to collective bargaining. The Senior Consulting Engineer leads complex engineering projects, is a recognized expert within their area of responsibility, and applies extensive knowledge of concepts, principles, and practices to resolve complex problems with only general direction. Provides technical leadership and coaching. Researches and identifies practical solutions to highly complex problems. Identifies opportunities and brings in ideas to help improve company performance. This position is hybrid, working from your remote office and your assigned work location based on business need. The assigned work location will be within the PG&E Service Territory. PG&E is providing the salary range that the company in good faith believes it might pay for this position at the time of the job posting. This compensation range is specific to the locality of the job. The actual salary paid to an individual will be based on multiple factors, including, but not limited to, specific skills, education, licenses or certifications, experience, market value, geographic location, collective bargaining agreements, and internal equity. The annual salary range is: CA Minimum, $173,856 CA Maximum, $213,624 Job Responsibilities Manage large complex projects and perform engineering analyses, studies, and develop conceptual designs. Develop innovative solutions to solve challenging technical issues. Acts as a lead in root cause analysis and makes recommendations to address local and system-wide problems. Acts as a company witness, liaison, and/or information provider to outside parties. Develops technical policies, procedures, and contributes to the development of standards, specifications, construction documents, and guidelines. Represents PG&E at external industry associations, committees, trade organizations and other inter-utility groups. Acts as an engineering mentor. Qualifications Minimum: BS Degree in Electrical Engineering or a related technical discipline from an accredited curriculum in the US or the equivalent from outside the US Current California PE license, Electrical 13 years of cumulative experience in electrical engineering and design Desired: Experience in power system infrastructure with applied knowledge of concepts, principles and practices #featuredjob

Requisition ID # 167565 Job Category: Engineering / Science Job Level: Individual Contributor Business Unit: Electric Engineering Work Type: Onsite The hardworking coworkers of Electric Engineering ensure all manners of electric engineering-including electric standards and process safety, electric design engineering, instrumentation testing and controls, undergrounding, electric regulatory compliance and electric investment planning-are in place to safely enable a strategic and stable workplan for our Electric Operations partners. Our organization is accountable for program planning, financial budgeting, and project execution and delivery of all electric engineering projects. Electric Engineering is comprised of approximately 2,000 coworkers. Position Summary This job is represented by Engineers and Scientists of California (ESC)subject to collective bargaining. This is a senior-level engineer job that requires mastery of the journey engineer job duties and is responsible for leading engineering and design of complex projects. Applies extensive knowledge of concepts, principles, and practices to resolve complex problems with only general direction. Provides leadership, coaching, technical direction, knowledge transfer and assistance to technical employees and teams. Additional responsibilities beyond the Project engineer include, but are not limited to, the following: Deliver presentations, lead team meetings, interpret industry practices and codes. PG&E is providing the salary range that the company in good faith believes it might pay for this position at the time of the job posting. This compensation range is specific to the locality of the job. The actual salary paid to an individual will be based on multiple factors, including, but not limited to, specific skills, education, licenses or certifications, experience, market value, geographic location, collective bargaining agreements, and internal equity. The salary range is: CA Minimum, $153,828 CA Maximum, $197,628 Job Responsibilities May perform functions of Associate and Journey level Engineers and in addition: Manage large complex projects and perform engineering analyses, studies, and develop conceptual designs. Lead, coach, direct, and assist technical employees and teams on technical issues. May act as an engineering mentor. Assist in finalizing contract project specification and technical evaluation of contract project bids. Provide support to other departments in land, permitting, and legal issues. Resolves problems of complex scope. Assignments may provide an opportunity for creative or non-standard approaches. Under general direction, independently plans work to meet assigned general objectives. Work may be reviewed upon completion; solution may provide an opportunity for creative/non-standard approaches. External contacts are with contractors, vendors and local public agencies with ministerial authority. Internal contacts are with clients, project team members, and company management. May provide technical direction to less experienced team members. Exchanges information and solves problems with others outside the team. Qualifications Minimum: Bachelor's degree in Electrical Engineering from an accredited curriculum in the US or the equivalent from outside the US 8 years of cumulative experience in electrical engineering and design Desired: Current and active California PE license Strong familiarity with GO 95, NESC, and PG&E transmission line standards and construction practices Strong familiarity with transmission line engineering tools, i.e. PLS-CADD, PLS-POLE, etc. Experience in multiple large and complex electric transmission projects

Field Electrical Engineer This position is responsible to provide technical services as it relates to routine and moderately complex maintenance and/or repair of control systems and their components at customer sites or in FLANDERS locations. The essential job functions include, but are not limited to: * Provide technical, field engineering services for customers. * Diagnose and troubleshoot issues as they relate to control systems and their components at customer sites or in FLANDERS shops. * Provide after-hours support in person and/or over the phone. * Complete necessary service, time tracking, and expense documentation. * Direct or provide on-the-job training as needed. * Prepare or supervise quotations for assigned projects. * Schedule and prioritize work for assigned projects. * Confer with shop managers, supervisors and office personnel to coordinate work. * Ensure proper tools and necessary equipment are available and in good condition to perform the required work efficiently. * Observe all safety procedures and use proper safety equipment as needed. * Overnight travel required. * Bachelor of Science or equivalent practical experience. * Relevant manufacturer product training. * Minimum 4- 5 years' experience in related field in mining, metal, mills and/or heavy industry. PLC and Drive experience required. Valid Driver License

Job Posting Start Date 12-11-2025 Job Posting End DateFlex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary To support our extraordinary team who build great products and contribute to our growth, we're looking to add an Controls Manager located in Austin,Tx. Reporting to the Director, Operations Engineering the Controls Manager is responsible for leading a team of controls engineers in the design, development, and implementation of automated control systems for machinery and processes. This role combines technical expertise with leadership responsibilities, ensuring projects are delivered on time. The position requires strong knowledge of PLCs, HMIs, SCADA systems, and industrial automation technologies, as well as the ability to mentor and guide team members. What a typical day looks like: Leadership & Team Management Lead and mentor a team of controls engineers, providing technical guidance and career development. Allocate resources, assign tasks, and monitor progress to ensure timely project delivery. Foster a collaborative and innovative team environment. Project Management Plan and direct controls-related project responsibilities from concept through commissioning. Develop project scopes, budgets, schedules, and risk assessments. Ensure compliance with organizational standards and industry regulations. Technical Expertise Design, develop, and implement control systems including PLC programming, HMI development, and SCADA integration. Oversee system simulations, testing, and debugging to ensure functionality and reliability. Stay current with emerging automation technologies and implement best practices. Customer & Stakeholder Interaction Participate in technical discussions with clients and internal teams. Provide training and support for customers and maintenance staff. Prepare documentation, including operating instructions and system specifications. The experience we're looking to add to our team: Education: Bachelor's or Master's degree in Electrical Engineering, Automation, or related field. Experience: 7+ years in controls engineering, with at least 2 years in a leadership role. Technical Skills: Proficiency in PLC programming (Allen-Bradley, Siemens, Beckhoff, etc.). Experience with HMI/SCADA systems and industrial networks (Ethernet/IP, Modbus, Profibus). Knowledge of safety standards (ANSI, IEC, NFPA). Knowledge of working in a GAMP/GxP environment. Soft Skills: Strong leadership, communication, and problem-solving abilities. Ability to manage multiple projects and prioritize tasks effectively. Preferred Certifications Professional Engineer (PE) license or equivalent. Functional Safety Certification (TÜV or similar) KR13 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryProduction EngineeringRelocation: Eligible for domestic relocation only Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

This position is responsible to provide technical services as it relates to routine and moderately complex maintenance and/or repair of control systems and their components at customer sites or in FLANDERS locations. The essential job functions include, but are not limited to: * Provide technical, field engineering services for customers. * Diagnose and troubleshoot issues as they relate to control systems and their components at customer sites or in FLANDERS shops. * Provide after-hours support in person and/or over the phone. * Complete necessary service, time tracking, and expense documentation. * Direct or provide on-the-job training as needed. * Prepare or supervise quotations for assigned projects. * Schedule and prioritize work for assigned projects. * Confer with shop managers, supervisors and office personnel to coordinate work. * Ensure proper tools and necessary equipment are available and in good condition to perform the required work efficiently. * Observe all safety procedures and use proper safety equipment as needed. * Overnight travel required. * Bachelor of Science or equivalent practical experience. * Relevant manufacturer product training. * Minimum 4- 5 years' experience in related field in mining, metal, and/or heavy industry. PLC and Drive experience required. Valid Driver License

Primary Purpose: Provide dragline field engineering electrical services, to support various dragline manufactures, primarily in the mining industry, at customer sites and at FLANDERS locations for complex and non-routine issues. Essential Functions: * Strong troubleshooting skills and support of vintage systems as well as latest AC and DC drive systems, PLC, HMI automation systems. Including specific troubleshooting, setup, and correlation of functions for Siemens and ABB AC & DC drives. * Proficient using a DATAQ data logger, to capture and compile XY recordings, complete detailed XY reports, and provide corrective action plans * Provide other technical services as it relates to complex maintenance and/or repair of control systems and their components at customer sites or FLANDERS locations. May include support of non-routine and never repaired systems. * Diagnose and troubleshoot issues as they relate to control systems and their components at customer sites or in FLANDERS locations. * Communicate with plant engineers and/or maintenance personnel at customer sites on technical questions and specifications. * Provide after-hours support in person and/or over the phone. * Provide technical information and data, for the creation of quotations and work scopes. Information includes job repair requirements, parts for order and use, and associated cost. * Complete necessary service, time tracking, and expense documentation. * Maintain tools and test equipment properly. * Communicate with FLANDERS' account managers regarding the status of work as it applies to their customers. * Identify and assist with repair and manufacturing training needs. * Mentor and provide guidance to other Field Engineers. * Experience: * Five years of dragline engineering experience in industrial electrical field service and/or similar industrial environment. * Mining and metals industry experience required. * Other: * Strong working knowledge of programmable logic controllers (PLC) * Strong working knowledge of drive systems for machine troubleshooting. * Strong working knowledge of multiple industrial applications. * Ability to take after-hours calls. * Ability to work independently with little direct management. * Strong problem solving/troubleshooting skills. * Strong time management skills with the ability to multitask while coordinating multiple high-level priorities. * Strong knowledge of personal computers and Microsoft Office software. * Ability to read, write, and comprehend complex written and verbal instructions. * Ability to understand, perform, and retain various job-related training, operational, and safety procedures. * Ability to exercise initiative, judgment, and decision making related to non-routine duties. * Overnight travel required.

This role, part of the Front-End Innovations (FEI) Team, is responsible for developing and demonstrating proof-of-concept solutions for revolutionary new products and value propositions for the PROCELL B2B business. The position combines hardware, firmware, and software development to create IoT-enabled solutions and advanced feature sets that enhance PROCELL's product ecosystem. The individual will work closely with senior FEI engineers to design, build, and test prototypes, leveraging IoT sensors, optimizing algorithms, and developing software tools for automation, data analysis, and user interfaces. Additionally, this role will include product ownership responsibilities for FEI field deployments, ensuring successful integration and performance in real-world environments. This is a remote position based out of San Diego, CA, with up to 20% travel for field deployments and collaboration with internal and external teams. Location: Remote - San Diego, CA * Develop an understanding of PROCELL's current hardware/firmware platform. * Build and test proof-of-concept innovations to expand the device ecosystem into new categories or brands. * Develop Python scripts and tools for test automation, data collection, and analysis to improve efficiency and accelerate development cycles. * Create web-based interfaces for proof-of-concept demonstrations of new features and user experiences. * Support development and testing of wireless solutions using Wi-Fi, Ble, LoRa, and other protocols. * Test and optimize hardware and firmware for power consumption and feature enhancements. * Expand product feature sets by integrating industry-standard sensor solutions. * Develop algorithms and concepts to optimize usage of models and device profiles for improved accuracy and advanced feature set development. * Act as product owner for FEI field deployments, ensuring successful implementation and feedback integration. * Collaborate with cross-functional teams and external partners to deliver integrated solutions. * Provide regular technical updates to management on timelines, issues, and successes. * Education: B.S. or higher in Electrical, Computer Engineering, or related field. * Minimum of 4 years in software development for IoT based Systems. * At least 2+ years in development of IoT based systems preferred. * Strong programming skills in Python (automation, data analysis), plus C, C++, C#, and/or web technologies (HTML/CSS/JavaScript). * Experience with web application development for prototypes or dashboards. * Solid understanding of microprocessor architecture, embedded systems, and real-time operating systems. * Experience leveraging continuous integration and deployment (CI/CD) pipelines, along with GitHub. * Practical experience integrating AI tools into design and development flows. * Familiarity with cloud platforms and IoT ecosystems. * Knowledge of sensor systems and wireless technologies. * Experience with battery technologies or energy products is a plus. * Highly motivated, organized, and collaborative with strong interpersonal skills. * Ability to work in a multicultural, geographically dispersed team. * Stronge sense of ownership and ability to work independently. * Willingness to travel (up to 20%). * Resilient, resourceful, and comfortable with ambiguity. Open-minded, self-starter and "can do" approach. #LI-Remote #LI-RP1 Duracell is the world's leading manufacturer and marketer of high-performance alkaline batteries, complemented by a portfolio of high quality, market leading specialty, rechargeable and professional batteries. Duracell's products power numerous critical professional devices across the globe such as heart rate monitors, defibrillators, telemetry devices, smoke detectors, fire alarms, automated valves and security systems. As the leader in the professional power category, Duracell has a rich history of innovation, continuously introducing batteries that are smaller, thinner, with more energy and longer lasting than competitive brands. Since March 2016, Duracell has found its permanent home within Berkshire Hathaway (ranked #4 World's Most Admired Companies by Fortune Magazine and #3 in the Fortune 500), and will continue to focus on sustainable growth, industry-leading innovation while creating long-term value for our customers and consumers. At Duracell, integrity, end-to-end accountability across all levels, fast decision-making and a "can do" attitude is highly valued.

Perform support for field operations. Perform physical tasks relating to testing of electrical apparatus. Perform as "Team lead" person on projects. Perform other assignments as required. Position requires minimal supervision. Essential Duties and Responsibilities include the following. Other duties may be assigned. * Perform all aspects of testing and maintenance of electrical power distribution systems. * Perform instrument transformer tests, power transformer testing, automatic transfer switch troubleshooting, generator testing, power meter calibration and high voltage circuit breaker testing. * Troubleshooting capabilities, relay calibration, use of load and power quality recording instrumentation, infrared scanners, medium voltage breaker and switchgear testing. * Test and troubleshoot complex electrical systems, moderately complex relay systems and power metering. * Perform start-up services on switchgear up through the 230 kV class. * May perform power system studies including short circuit, arc flash and protective device coordination. * Write complete, detailed reports promptly at end of day/project using a computer. * Represent the Company as a Subject Matter Expert (SME) on technical topics. * May perform complex analysis and evaluative tasks necessary to complete equipment- labeling projects consistent with recognized industry and international standards, local jurisdiction requirements and Company procedures. Travel Requirements * Willing to travel anywhere in North America >90% of the time. Schedule is dependent upon project work and is flexible to the degree it can be. This is worked out on a case by case basis with your assigned project manager. PTO scheduled in advance can and will be accommodated. * Does NOT require relocation to a Vertiv headquarter or regional office at this time. * This is "project work" which typical projects last anywhere from 3-12 months on average. It can vary based on schedule and progress. * Options for downtime (i.e. in between projects), employee can take PTO, training, regional work, and "home office" work. * Typical schedule is to work 8-12 weeks and then 1 weeks back at "home base" depending on project schedule. This varies based on the phase of the project. * Expect to receive accelerated on-job-training (OJT) and experience due to the nature of this work. Excellent career jump start and then settle down in a region (if and when you choose to do so) Supervisory Requirements * Supervise up to 5 team members, providing technical guidance and training on testing of Electrical apparatus. * Responsible for safety requirements, training, and reporting of their assigned team members. Competencies To perform the job successfully, an individual should demonstrate the following competencies: * Customer Focus - Is dedicated to meeting the expectations and requirements of internal and external customer; Gets first-hand customer information and uses it for improvements in products and services; Acts with customers in mind; Establishes and maintains effective relationships with customers and gains their trust and respect. * Decision Quality - Makes good decisions based upon a mixture of analysis, wisdom, experience, and judgment; most of his/her solutions and suggestions turn out to be correct and accurate when judged over time; sought out by others for advice and solutions. * Perseverance - Pursues everything with energy, drive and a need to finish; seldom gives up before finishing, especially in the face of resistance or setbacks. * Learning on the Fly - Learns quickly when facing new problems; a relentless and versatile learner; open to change; analyzes both successes and failures for clues to improvement; experiments and will try anything to find solutions; enjoys the challenge of unfamiliar tasks. * Peer Relationships - Can quickly find common ground and solve problems for the good of all; can represent his/her own interests and yet be fair to other groups; can solve problems with peers with a minimum of noise; is seen as a team player and is cooperative; gains trust. * Problem Solving - Uses rigorous logic and methods to solve difficult problems with effective solutions; probes all fruitful sources for answers; can see hidden problems; is excellent at honest analysis; looks beyond the obvious and doesn't stop at first answers. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience * Graduate Engineer BSEE or BSME and two years experience. OR Graduate of applicable Electrical Technical School or Military equivalent and five years minimum same or similar work experience. OR High school education or equivalent and six years minimum same or similar work experience. * Knowledge of the National Electrical Code and various industry standards, such as OSHA and NFPA. * Passed the NETA III (International Electrical Testing Association) exam or NICET equivalent. * Strong background and experience in most types of switchgear testing through the 230 kV class. * Good theoretical understanding of electrical power systems, and good aptitude for problem evaluation. * Complete projects consistently meeting customer's deadline and on budget. * Able to write detailed reports, using a computer. * Communicate effectively, in writing and verbally, with clients and peers. * Good judgment, dependable, supervises projects with technical expertise and good business management skills. * Strong computer skills including editing, formatting and using templates in Microsoft Word, use of Internet for standards/products/manufacturer research and operation of computer controlled test equipment. * Willing to work flexible hours, weekends, holidays and night work. Must be available for out- of-town work of up to several months. * Regularly required to stand, walk, use hands and fingers, handle or feel objects, tools or controls; reach with hands and arms; stoop, kneel, crouch, or crawl; talk, hear, and smell. Frequently required to sit, climb and balance. Specific vision abilities required by this job include close vision, distance vision, basic color differentiation and the ability to adjust focus. Regularly lift and/or move up to 25 pounds, and frequently lift and/or move 100 pound test sets. * Valid Driver's License. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES * Customer Focus * Operational Excellence * High-Performance Culture * Innovation * Financial Strength OUR BEHAVIORS * Own It * Act With Urgency * Foster a Customer-First Mindset * Think Big and Execute * Lead by Example * Drive Continuous Improvement * Learn and Seek Out Development At Vertiv, we're on a mission to empower the people that will power the future. From a simple swipe to life-changing medicines, from push notifications to generative AI. We design, manufacture, and service the products and solutions that keep the world connected. With $6.9 billion in revenue, a strong customer base and global reach spanning nearly 70 countries, we are uniquely positioned to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to **********************. If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. The anticipated pay range for this role in the State of Washington locality is between $30 to $60+ per hour-pay ranges for other geographic localities may vary. Certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance and are role based. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. The role is eligible to participate in a comprehensive and competitive benefits program, including medical, dental, vision, disability, PTO (accrued up to 15 days the first year), holiday pay (9 days), and 401k. Additional details about total compensation and benefits will be provided during the hiring process. The anticipated pay range for this role in the Colorado locality is between $30 to $60+ per hour-pay ranges for other geographic localities may vary. Certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance and are role based. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. The role is eligible to participate in a comprehensive and competitive benefits program, including medical, dental, vision, disability, PTO, holiday pay, and 401k. Additional details about total compensation and benefits will be provided during the hiring process .The estimated deadline to submit an application for this role is 12/15/2025 date, the company may need to extend the deadline based off the needs of the business and open role. If an extension is needed, the date will be updated accordingly. The anticipated pay range for this role in the California locality is between $30 to $60+ per hour-pay ranges for other geographic localities may vary. Certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance and are role based. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. The role is eligible to participate in a comprehensive and competitive benefits program, including medical, dental, vision, disability, PTO, holiday pay, and 401k. Additional details about total compensation and benefits will be provided during the hiring process. #ERS #LI-HR1

Perform support for field operations. Perform physical tasks relating to testing of electrical apparatus. Perform as “Team lead” person on projects. Perform other assignments as required. Position requires minimal supervision. Essential Duties and Responsibilities include the following. Other duties may be assigned. Perform all aspects of testing and maintenance of electrical power distribution systems. Perform instrument transformer tests, power transformer testing, automatic transfer switch troubleshooting, generator testing, power meter calibration and high voltage circuit breaker testing. Troubleshooting capabilities, relay calibration, use of load and power quality recording instrumentation, infrared scanners, medium voltage breaker and switchgear testing. Test and troubleshoot complex electrical systems, moderately complex relay systems and power metering. Perform start-up services on switchgear up through the 230 kV class. May perform power system studies including short circuit, arc flash and protective device coordination. Write complete, detailed reports promptly at end of day/project using a computer. Represent the Company as a Subject Matter Expert (SME) on technical topics. May perform complex analysis and evaluative tasks necessary to complete equipment- labeling projects consistent with recognized industry and international standards, local jurisdiction requirements and Company procedures. Travel Requirements Willing to travel anywhere in North America >90% of the time. Schedule is dependent upon project work and is flexible to the degree it can be. This is worked out on a case by case basis with your assigned project manager. PTO scheduled in advance can and will be accommodated. Does NOT require relocation to a Vertiv headquarter or regional office at this time. This is “project work” which typical projects last anywhere from 3-12 months on average. It can vary based on schedule and progress. Options for downtime (i.e. in between projects), employee can take PTO, training, regional work, and “home office” work. Typical schedule is to work 8-12 weeks and then 1 weeks back at “home base” depending on project schedule. This varies based on the phase of the project. Expect to receive accelerated on-job-training (OJT) and experience due to the nature of this work. Excellent career jump start and then settle down in a region (if and when you choose to do so) Supervisory Requirements Supervise up to 5 team members, providing technical guidance and training on testing of Electrical apparatus. Responsible for safety requirements, training, and reporting of their assigned team members. Competencies To perform the job successfully, an individual should demonstrate the following competencies: Customer Focus - Is dedicated to meeting the expectations and requirements of internal and external customer; Gets first-hand customer information and uses it for improvements in products and services; Acts with customers in mind; Establishes and maintains effective relationships with customers and gains their trust and respect. Decision Quality - Makes good decisions based upon a mixture of analysis, wisdom, experience, and judgment; most of his/her solutions and suggestions turn out to be correct and accurate when judged over time; sought out by others for advice and solutions. Perseverance - Pursues everything with energy, drive and a need to finish; seldom gives up before finishing, especially in the face of resistance or setbacks. Learning on the Fly - Learns quickly when facing new problems; a relentless and versatile learner; open to change; analyzes both successes and failures for clues to improvement; experiments and will try anything to find solutions; enjoys the challenge of unfamiliar tasks. Peer Relationships - Can quickly find common ground and solve problems for the good of all; can represent his/her own interests and yet be fair to other groups; can solve problems with peers with a minimum of noise; is seen as a team player and is cooperative; gains trust. Problem Solving - Uses rigorous logic and methods to solve difficult problems with effective solutions; probes all fruitful sources for answers; can see hidden problems; is excellent at honest analysis; looks beyond the obvious and doesn't stop at first answers. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience Graduate Engineer BSEE or BSME and two years experience. OR Graduate of applicable Electrical Technical School or Military equivalent and five years minimum same or similar work experience. OR High school education or equivalent and six years minimum same or similar work experience. Knowledge of the National Electrical Code and various industry standards, such as OSHA and NFPA. Passed the NETA III (International Electrical Testing Association) exam or NICET equivalent. Strong background and experience in most types of switchgear testing through the 230 kV class. Good theoretical understanding of electrical power systems, and good aptitude for problem evaluation. Complete projects consistently meeting customer's deadline and on budget. Able to write detailed reports, using a computer. Communicate effectively, in writing and verbally, with clients and peers. Good judgment, dependable, supervises projects with technical expertise and good business management skills. Strong computer skills including editing, formatting and using templates in Microsoft Word, use of Internet for standards/products/manufacturer research and operation of computer controlled test equipment. Willing to work flexible hours, weekends, holidays and night work. Must be available for out- of-town work of up to several months. Regularly required to stand, walk, use hands and fingers, handle or feel objects, tools or controls; reach with hands and arms; stoop, kneel, crouch, or crawl; talk, hear, and smell. Frequently required to sit, climb and balance. Specific vision abilities required by this job include close vision, distance vision, basic color differentiation and the ability to adjust focus. Regularly lift and/or move up to 25 pounds, and frequently lift and/or move 100 pound test sets. Valid Driver's License. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we're on a mission to empower the people that will power the future. From a simple swipe to life-changing medicines, from push notifications to generative AI. We design, manufacture, and service the products and solutions that keep the world connected. With $6.9 billion in revenue, a strong customer base and global reach spanning nearly 70 countries, we are uniquely positioned to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. The anticipated pay range for this role in the State of Washington locality is between $30 to $60+ per hour-pay ranges for other geographic localities may vary. Certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance and are role based. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. The role is eligible to participate in a comprehensive and competitive benefits program, including medical, dental, vision, disability, PTO (accrued up to 15 days the first year), holiday pay (9 days), and 401k. Additional details about total compensation and benefits will be provided during the hiring process. The anticipated pay range for this role in the Colorado locality is between $30 to $60+ per hour-pay ranges for other geographic localities may vary. Certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance and are role based. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. The role is eligible to participate in a comprehensive and competitive benefits program, including medical, dental, vision, disability, PTO, holiday pay, and 401k. Additional details about total compensation and benefits will be provided during the hiring process .The estimated deadline to submit an application for this role is 12/15/2025 date, the company may need to extend the deadline based off the needs of the business and open role. If an extension is needed, the date will be updated accordingly. The anticipated pay range for this role in the California locality is between $30 to $60+ per hour-pay ranges for other geographic localities may vary. Certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance and are role based. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. The role is eligible to participate in a comprehensive and competitive benefits program, including medical, dental, vision, disability, PTO, holiday pay, and 401k. Additional details about total compensation and benefits will be provided during the hiring process. #ERS #LI-HR1

Help us tackle the growing wildfire crisis with the latest advancements in AI and IoT Who we are The problem: Every minute matters in fire response. As climate change amplifies the intensity of wildfires-with longer fire seasons, dryer fuels, and faster winds-new ignitions spread faster and put more communities at risk. Today, most wildfires are detected by bystanders and reported via 911, meaning it can take hours to detect a fire, verify its exact location and size, and dispatch first responders. Fire authorities need a faster way to detect, confirm, and pinpoint fires so that they can quickly respond-preventing small flare-ups from becoming devastating infernos. About Pano: We are a 100+ person growth-stage hybrid-remote start-up, headquartered in San Francisco. We are the leader in early wildfire detection and intelligence, helping fire professionals respond to fires faster and more safely-with the right equipment, timely information, and enhanced coordination-so that they can stop a new ignition before it grows. Pano AI combines advanced hardware, software, and artificial intelligence into an easy-to-use, web-based platform. Leveraging a network of ultra-high-definition, 360-degree cameras atop high vantage points, as well as satellite and other data feeds, Pano AI produces a real-time picture of threats in a geographic region and delivers immediate, actionable intelligence. Pano AI is on TIME's list of the 100 Most Influential Companies of 2025! MIT Technology Review listed Pano as one of the top 15 climate tech companies to watch in 2024, and Fast Company named Pano AI one of the Top 10 most innovative companies in AI of 2023. We've also been featured in the Wall Street Journal, Bloomberg, and CNBC News. Pano AI's dozens of government and enterprise customers span 16 states in the U.S., five states in Australia, and BC, Canada, and we are currently monitoring over 30 million acres of land. Pano AI has raised $89M in venture capital funding from Giant Ventures, Liberty Mutual Ventures, Tokio Marine Future Fund, Congruent Ventures, Initialized Capital, Salesforce Ventures, and T-Mobile Ventures. Learn more at ********************* The Role (Please note this role is located in SF) * Pano is searching for its first full time Hardware Engineer to support the design, development, and testing of our next-generation Pano products deployed across the United States, Canada and Australia. You will be a versatile problem-solver, comfortable working across mechanical and electrical disciplines in a fast-paced, hands-on environment. * Reporting to the Manager of NPI, you will contribute to the full product lifecycle from concept through production, gaining broad exposure to hardware engineering while working on meaningful technology that protects communities from wildfire. This is an opportunity to build foundational engineering skills in a successful, mission-driven startup environment. Responsibilities * Design and develop mechanical components and assemblies for Pano Stations, including CAD modeling, tolerance analysis, and design for manufacturing (DFM). * Support electrical testing, validation, and debugging activities including running test procedures, troubleshooting circuits, and collecting performance data. * Build and assemble prototypes, conduct hands-on testing, and iterate on designs based on test results and field feedback. * Collaborate with cross-functional teams including Electrical Engineering, Firmware, Supply Chain, Field Operations, and Manufacturing to integrate mechanical and electrical subsystems. * Create and maintain technical documentation including test reports, assembly instructions, design specifications, and design validation plans. * Support NPI (New Product Introduction) builds and PRQ (Post Ramp Qual) efforts, including build readiness activities and material validation. * Assist with vendor selection, component sourcing, and manufacturing support activities to enable successful production ramps. * Participate in design reviews and contribute to continuous improvement initiatives across hardware development processes. * Ability to travel domestically and internationally as needed (0 to 20% at times). Qualifications & Experience * Bachelor's degree in Mechanical Engineering, Mechatronics, or related engineering discipline required. * 0-2 years of professional experience in hardware development. * Proficiency with CAD software (SolidWorks, Creo, or similar). * Basic understanding of electrical circuits and ability to read schematics. * Hands-on experience with prototyping, testing equipment (multimeters, oscilloscopes, power supplies), and debugging. * Strong problem-solving skills with attention to detail and ability to work independently. * Excellent written and verbal communication skills with ability to explain technical concepts clearly. * Ability to work as part of a geographically dispersed team, across multiple time zones. * Experience using collaboration tools such as Jira, Confluence, or similar. * Strong working knowledge of Microsoft Office. Nice to have * Coursework or project experience in electrical engineering, electronics, or circuit design. * Familiarity with embedded systems, sensors, or electromechanical products. * Experience with finite element analysis (FEA) or thermal simulation tools. * Knowledge of manufacturing processes (injection molding, sheet metal, PCB assembly). * Exposure to design validation, reliability testing, and environmental testing methods. * Programming or scripting experience (Python, MATLAB, etc.). * Experience working in fast-paced startup or NPI environments. Final compensation for full-time employees is determined by a variety of factors, including job-related qualifications, education, experience, skills, knowledge, and geographic location. In addition to base salary, full-time roles are eligible for stock options. Our benefits package also includes comprehensive medical, dental, and vision coverage, a matching 401(k) plan, and unlimited paid time off.

INNOVATE WITHOUT BOUNDARIES! At Milwaukee Tool we firmly believe that our People and our Culture are the secrets to our success - so we give you unlimited access to everything you need to create disruptive new technologies and solutions on our electrical engineering teams. Our Engineering Team is responsible for giving life to the batteries, motors, and electronics that power solutions changing the lives of our users. Every developmental phase of these critical components happens in-house under the watch of this team. We continue to invest in electrical engineering resources to design and develop leadership in electronic capabilities; something unique within the industry. And we're pushing the limits in firmware engineering, power electronics, embedded systems, machine learning, and the use of artificial intelligence. Behind our doors you'll be empowered every day to own it, drive it, and do what it takes to design and develop the biggest breakthroughs in the industry. Meanwhile, you'll have the support and resources of the fastest-growing brand in the construction industry to make it happen. Year after year, our team continues to make significant breakthroughs in the industry. We're just getting started. To learn more about our story click HERE. The Senior Electronics Engineer will lead the design and implementation of testing of embedded systems for Milwaukee Tool's Personal Protective Equipment (PPE) products. You will work through the product development process in a team environment interacting with cross-functional stakeholders such as hardware, firmware, product development, and reliability engineers. You'll also be DISRUPTIVE through these duties and responsibilities: Executing a lead role for the design, prototype, test and troubleshooting embedded electronics hardware and firmware. Create new circuit designs using schematic capture, PCB layout software, SPICE, and knowledge of industry best practices. Identify performance and cost tradeoffs of competing electronic design solutions. Ideate, evaluate, and develop new technologies for applications. Provide candid and effective communications up, down and across the organization on progress, barrier removal and escalation of business risks/opportunities. Demonstrate Milwaukee Tools Culture of high performance and agility by independently creating Work Breakdown Structure for your work and driving to critical milestones. Drive urgency and accountability in project schedules to establishing and achieving key project metrics that meet the organization's needs. Serve as a role model Milwaukee Tool's culture while mentoring, guiding, and coaching junior Engineers. Grow the ability to lead and manage a small team. Use laboratory equipment such as oscilloscopes, power supplies, e-loads, and data acquisition systems. Independently track projects to ensure adherence to schedule and the Milwaukee process. Design and qualify new designs to applicable regulatory standards such as UL, CEC, CE, and ANSI. What TOOLS you'll bring with you: Bachelor of Science Degree in Electrical Engineering or related field. 5+ years of experience in Electrical Engineering or related work experience. Strong understanding of power management and ultra-low power embedded hardware and firmware implementations. Experience with designing embedded systems and interfacing with microcontrollers Ability to write 'C' code. Strong understanding of sensor system design, test methods, controls, and architectures. Excellent problem-solving skills, exercises independent judgement and works well under pressure in a dynamic environment. Ability to travel 10% of the time (domestic and international). Other TOOLS we prefer you to have: Master's Degree in Systems Engineering, Electrical Engineering, Mechanical Engineering, MBA, or related field. Experience with IoT / Wireless products Familiarity with Matlab and Simulink. Working knowledge of a second modern programming language such as Python or C++. Knowledge in power electronics. Familiarity with firmware design and model-based engineering concepts. Familiarity with mechanical design and thermal management concepts. Experience with wearables and IOT devices / applications We provide these great perks and benefits: Robust health, dental and vision insurance plans. Generous 401 (K) savings plan. Education assistance. On-site wellness, fitness center, food, and coffee service. And many more, check out our benefits site HERE. Milwaukee Tool is an equal opportunity employer.

This role, part of the Front-End Innovations (FEI) Team, focuses on hardware-centric proof-of-concept development, analytics, and rigorous testing to validate new product concepts for the PROCELL B2B business. The position emphasizes data-driven decision-making, hardware optimization, and system-level integration to ensure robust performance in real-world environments. The individual will work closely with senior FEI engineers to design, build, and test prototypes, conduct detailed data analysis, and develop automation tools for testing workflows. This role also includes ownership of PoC deployments, ensuring successful implementation and feedback integration from field trials. Location: Atlanta, Science Square Travel: Up to 10%. • Education: B.S. or higher in Electrical, Computer Engineering, or related field. • Minimum of 3 years of hardware and data analysis. • At least 2+ years in development of IoT based systems preferred. • Strong programming skills in Python (automation, data analysis). • Strong experience in data analysis techniques and application to large data sets. • Experience with web application development for prototypes or dashboards. • Familiarity with embedded systems, microprocessor architecture, and real-time operating systems. • Experience leveraging continuous integration and deployment (CI/CD) pipelines, along with GitHub. • Practical experience integrating AI tools into design and development flows. • Familiarity with cloud platforms and IoT ecosystems. • Knowledge of sensor systems and wireless technologies. • Experience with battery technologies or energy products is a plus. • Highly motivated, organized, and collaborative with strong interpersonal skills. • Ability to work in a multicultural, geographically dispersed team. • Stronge sense of ownership and ability to work independently. • Willingness to travel (up to 10%). • Resilient, resourceful, and comfortable with ambiguity. Open-minded, self-starter and “can do” approach. Develop deep understanding of PROCELL's hardware/firmware platforms and testing protocols. Lead proof-of-concept hardware builds and validation testing, including environmental and performance characterization. Design and implement Python-based automation scripts for test execution, data acquisition, and reporting. Perform data analytics on test results to identify trends, optimize designs, and improve reliability. Collaborate on sensor integration and wireless connectivity (Wi-Fi, BLE, LoRa) for prototype systems. Develop and maintain test frameworks and dashboards for monitoring PoC feature performance. Optimize hardware for power consumption, durability, and feature enhancements. Act as product owner for FEI PoC deployments, ensuring timely execution and actionable feedback. Provide clear technical updates to management on progress, risks, and outcomes.

This role, part of the Front-End Innovations (FEI) Team, focuses on hardware-centric proof-of-concept development, analytics, and rigorous testing to validate new product concepts for the PROCELL B2B business. The position emphasizes data-driven decision-making, hardware optimization, and system-level integration to ensure robust performance in real-world environments. The individual will work closely with senior FEI engineers to design, build, and test prototypes, conduct detailed data analysis, and develop automation tools for testing workflows. This role also includes ownership of PoC deployments, ensuring successful implementation and feedback integration from field trials. Location: Atlanta, Science Square Travel: Up to 10%. * Develop deep understanding of PROCELL's hardware/firmware platforms and testing protocols. * Lead proof-of-concept hardware builds and validation testing, including environmental and performance characterization. Design and implement Python-based automation scripts for test execution, data acquisition, and reporting. * Perform data analytics on test results to identify trends, optimize designs, and improve reliability. * Collaborate on sensor integration and wireless connectivity (Wi-Fi, BLE, LoRa) for prototype systems. * Develop and maintain test frameworks and dashboards for monitoring PoC feature performance. Optimize hardware for power consumption, durability, and feature enhancements. * Act as product owner for FEI PoC deployments, ensuring timely execution and actionable feedback. * Provide clear technical updates to management on progress, risks, and outcomes. * Education: B.S. or higher in Electrical, Computer Engineering, or related field. * Minimum of 3 years of hardware and data analysis. * At least 2+ years in development of IoT based systems preferred. * Strong programming skills in Python (automation, data analysis). * Strong experience in data analysis techniques and application to large data sets. * Experience with web application development for prototypes or dashboards. * Familiarity with embedded systems, microprocessor architecture, and real-time operating systems. * Experience leveraging continuous integration and deployment (CI/CD) pipelines, along with GitHub. * Practical experience integrating AI tools into design and development flows. * Familiarity with cloud platforms and IoT ecosystems. * Knowledge of sensor systems and wireless technologies. * Experience with battery technologies or energy products is a plus. * Highly motivated, organized, and collaborative with strong interpersonal skills. * Ability to work in a multicultural, geographically dispersed team. * Stronge sense of ownership and ability to work independently. * Willingness to travel (up to 10%). * Resilient, resourceful, and comfortable with ambiguity. Open-minded, self-starter and "can do" approach. Duracell is the world's leading manufacturer and marketer of high-performance alkaline batteries, complemented by a portfolio of high quality, market leading specialty, rechargeable and professional batteries. Duracell's products power numerous critical professional devices across the globe such as heart rate monitors, defibrillators, telemetry devices, smoke detectors, fire alarms, automated valves and security systems. As the leader in the professional power category, Duracell has a rich history of innovation, continuously introducing batteries that are smaller, thinner, with more energy and longer lasting than competitive brands. Since March 2016, Duracell has found its permanent home within Berkshire Hathaway (ranked #4 World's Most Admired Companies by Fortune Magazine and #3 in the Fortune 500), and will continue to focus on sustainable growth, industry-leading innovation while creating long-term value for our customers and consumers. At Duracell, integrity, end-to-end accountability across all levels, fast decision-making and a "can do" attitude is highly valued.