Gulfstream Aerospace jobs in Savannah, GA - 125 jobs

QC Inspect II in GAC Savannah Unique Skills: PQ stamp required. will be for outside processing inspector. At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission. Education and Experience Requirements High School Diploma or GED required. 3 years quality inspection experience required. 5 years manufacturing experience or equivalent aerospace experience preferred.. Other Formal Inspection Training Program 90 Days required. Position Purpose: In a team oriented environment, perform all tasks in Initial Phase Manufacturing, Composites, or Final Phase in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data. Job Description Principle Duties and Responsibilities: Essential Functions: * Perform inspection duties utilizing engineering drawings and orders, work instructions, technical specifications, QA procedures and instructions, and other related documents. * Perform preliminary and progressive inspections of aircraft structure and systems, verify functional operation, final inspections, inspect for FOD and verify paperwork. Witness, verify and document specified manufacturing process steps. * Perform conformity/first article inspections to ensure compliance with FAA approved procedures. * Perform transfer and consolidated inspections. * Ensure the proper use and storage of area tools and equipment. * Conduct work in a manner that enhances own/other employees health and safety, product safety and promotes risk reduction; participate openly in safety-related event investigations, and immediately report workplace hazards and make suggestions for control; cooperate and contribute toward the overall success of the Safety program at the local level. Additional Functions: * Provide on the job training for subordinate level inspectors. . * Coordinate inspection workload according to priorities, efficiency and cost effectiveness. . * Provide technical support to manufacturing, engineering and IPT personnel. . * Perform duties of MRB signature authority. . * Perform area inspections to ensure compliance with applicable standards and specifications. . * Lead continuous improvement activities. . Perform other duties as assigned. Other Requirements: * Proficient in GAC CATIA or blueprint reading and interpretation, GAC work instructions, technical specifications and GAC QA Manual. * Competent in the use of all job related tools and equipment. This job requires one to be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 230166 Category: Quality Assurance Percentage of Travel: Up to 25% Shift: Multiple Shifts Employment Type: Full-time Posting End Date: 01/30/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft Nearest Major Market: Savannah

Upholstery Tech Sr in GAC Savannah Unique Skills: Craft the finest interiors in aviation Gulfstream is looking for skilled upholsterers to craft unique designs in award-winning cabins. This job is for the weekend shift (Friday-Sunday 5:00a-5:30p). Education and Experience Requirements High School Diploma or GED required. 4 years experience in upholstery to include two (2) years aircraft upholstery experience or 6 years commercial upholstery experience. Advanced knowledge of upholstery and sewing processes and products and/or advance carpet knowledge including being able to install custom carpets. Position Purpose: Work independently to design, fabricate, and install upholstery and trim items in aircraft interiors. Assist Shop Lead by overseeing projects and providing guidance and direction to co-workers. Mentor and train other Upholstery Technicians. Job Description Principle Duties and Responsibilities: Essential Functions: * Fabricate and install seat covers, curtains and various assemblies and subassemblies. . * Interpret material specifications and design/engineering drawings to ensure finished product meets design and engineering requirements. * Sew, fabricate, and install covers for all styles of panels in the aircraft interior while meeting safety, quality, and productivity standards and goals. * Use the material tracking system, Corridor, to create parts demand, track squawks and to sign-off work. * Work with design/drawings to cut and install advanced custom design carpets with unique patterns. Additional Functions: * 1. Accept Lead responsibilities when needed. Oversees projects and coordinates with Lead to delegate tasks to assigned technicians. . * 2. Conduct safety audits and assists team members in doing safety audits. . * 3. Assist in maintaining shop equipment and associated JSAs. . * 4. Comply with and champion Safety, 5S, and housekeeping policies and ensure the protection of aircraft interiors (PTP). . * 5. Mentor and train lesser skilled technicians and monitor their work to ensure they complete assigned tasks in accordance with required. levels of safety, quality and productivity. . * 6. Work with Lead and higher skilled technicians to develop and implement process improvements reduce material cost, cycle time, and labor hours using Lean Six-Sigma tools. . Perform other duties as assigned. Other Requirements: * Possess a working knowledge of Gulfstream inspection and process specifications and terminology. * The ability to read, write, speak, and understand proficiently the English language. * Ability to read and interpret blueprints and engineering documentation. * Must be computer literate. * Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. This job requires one to be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 230586 Category: Operations Percentage of Travel: None Shift: Weekend Days Employment Type: Full-time Posting End Date: 03/31/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft Nearest Major Market: Savannah

Senior NDT Technician for Repair Station in GAC Savannah Unique Skills: At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission. About the Role The position will be working within the Savannah Service Center on our customer's aircraft post production. NDT Level II Certification(s) in Magnetic Particle (MT), Dye Penetrant, Eddy Current (ET), Ultrasonic (UT), or Xray. Work is primarily first shift, but applicant needs to be flexible to work a different shift as needed based on business needs. Education and Experience Requirements High School Diploma or GED required. 4 years of NDT related experience required.. Certified in two NAS 410 NDT methods required. and must be able to be certified in a third within 1 year. . Other Certification in more than 2 NAS 410 NDT methods preferred. ASQ certificate (American Society for Quality) preferred. Position Purpose: In a team-oriented environment, performs all tasks in area of responsibility in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies and installations are built to type design data Job Description Principle Duties and Responsibilities: Essential Functions: * Performs non-destructive tests (NDT) and determines product acceptability to the authorized limits of the NDT level obtained in accordance with prescribed methods and procedures . * Records, organizes and evaluates test results and enters results into applicable documents . * Ensures compliance to all radiation safety rules and regulations and provides protection to self and others during testing . * Maintains equipment and assures calibration for tests to be performed . * Maintains inventory control of area equipment . Additional Functions: * Works with and assists other NDT Technicians as required. . * Coordinates NDT inspection workload according to priorities, efficiency and cost effectiveness . * Provides technical assistance to subordinate level NDT technicians . * Performs process control on area inspection equipment . * Performs exposure room interlock safety checks, establishes radiation safety barriers, zeros pocket dosimeters, operates radiation survey meters and completes applicable survey logs and forms . * Performs automated ultrasonic C-scan inspection of composite parts . * Must be available to work any shift . Perform other duties as assigned. Other Requirements: * Must provide formal NDT training records. * NDT experience on determining product acceptability preferred. * Experience in blueprint reading and interpretation. * Must be able to read a scale and perform basic shop math. * Read and comprehend basic documents and instructions. * Must have essential personal and communication skills. * Must demonstrate good housekeeping and safety practices. * Proficiency in current computer-based software. * Must be able to lift and transport objects up to 40 pounds. * Must be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 229182 Category: Quality Assurance Percentage of Travel: Up to 25% Shift: Multiple Shifts Employment Type: Full-time Posting End Date: 01/26/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft Nearest Major Market: Savannah

Acft Painter Sr in GAC Savannah Unique Skills: At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission. An Aircraft Tech Sr specializes in precision paint application, including blowing-in colors, mixing paints, and sanding/buffing for flawless finishes. Must follow SPT and WFR processes, mentor team members, and support continuous improvement. Requires advanced knowledge of paint products, blueprint interpretation, computer literacy, and ability to work in confined spaces, lift 40 lbs, and pass respirator certification. Attention to detail and adherence to safety and quality standards are essential. Education and Experience Requirements High School Diploma or GED required. 4 years related paint processes. Valid Driver's License required. Position Purpose: The Senior Aircraft Painter works independently to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures. Act on behalf of the Lead in their absence and provide assistance and work direction to other painters. Job Description Principle Duties and Responsibilities: Essential Functions: * Safely perform aircraft preparation, painting, and detailing of aircraft under minimal supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. * Assist supervision with assignment and accomplishment of work for assigned team members. Promote high standards of quality through instruction and by setting a good example for other painters to follow. Act on behalf of supervision as required. * Follow standard operating procedures when using tools and equipment such as dual action sanders, hydraulic lift platforms and paint sprayers. Properly care for and maintain shop equipment and tools. * Follow standard operating procedures when using sealants, paint strippers and corrosion-preventive chemicals and use protective equipment as required. * Comply with safety rules and procedures and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. * Use the material tracking system to create parts demand, track squawks and to sign-off work. * Assist with aircraft movement in hangars. Additional Functions: * 1. Comply with Paint shop standard practices (SPT) process and WFR processes. . * 2. Mentor other members of Paint operations as required. . * 3. Offer continuous improvement ideas/participate in continuous improvement activities. . Perform other duties as assigned. Other Requirements: * Thorough and complete understanding of the GAMPS, paint operations SPT manual and paint WFR. * Advanced knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics). * Ability to read, write, speak, and understand the English language. * Ability to read and interpret blueprints and engineering documentation. * Able to pass Pulmonary Function Test to obtain respirator certification. * Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. * Must be computer literate. This job requires one to be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 229734 Category: Operations Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 12/15/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft Nearest Major Market: Savannah

RS QC Analyst Sr A&P in GAC Savannah Unique Skills: At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission. * Good communication skills * Excellent computer skills in Excel, Word and presentation applications * Ability to professionally articulate and consultatively communicate the outfitting options on the various aircraft. * Current working knowledge of applicable FAA, EASA, CAAC and other civil aviation authority regulations and certification requirements and familiarity with international certification requirements as applicable to aircraft outfitting * Must be willing to support customer needs during and after normal working hours. Education and Experience Requirements Bachelor's Degree in related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 6 years of airworthiness experience with in any of the following areas 14CFR Parts 23, 25, 27, 29, 33 and/or Parts 91, 121,125,135,145 or 6 years of military aviation maintenance experience. General knowledge of Federal Aviation Regulations, Advisory Circulars, FAA forms and documents, as well as any foreign authority documentation. A&P (FAA Airframe and Powerplant) license required. Position Purpose: Under minimal supervision, performs Return to Service oversight and assists subordinates in the general and technical aspects of Quality Control Return to Service requirements to ensure aircraft airworthiness is maintained in a timely and efficient manne. Job Description Principle Duties and Responsibilities: Essential Functions: * Prepares and schedules aircraft documentation with the QC Analysts and Inspection team. Reviews all documents and work orders prior to return to service of the aircraft and ensures aircraft returns to service in accordance with current FARs and company policy . * Oversees, develops and implements documents for QC utilization . * Coordinates new STCs, Aircraft Flight Manual Supplements and FAA Form 337 field approval of avionics and mechanical installations with Engineering Certification group and the FAA . * Assists with the activity of Special Flight Permits, Standard Airworthiness certificates, Export certificates, etc . * Focal point for the Inspection team. Assures technical data for CMP, Engineering, Technical Services, Avionics and other Service Center oriented departments . * Focal point for customers after departure for questions pertaining to the work scope of the maintenance visit on compliance, research, and documentation . * Assists customers with all activities relating to previous and present maintenance performed on aircraft . * Focal point in office to notify and work with QC Management when foreign authoritys modification approval is required. * Assures security of aircraft records in our possession . * Attends any required. meetings as delegated by Supervisor and identifies critical path issues for Return to Service . * Primary trainer for QC Analyst Assistants and QC Analyst . * Performs any other tasks/duties as assigned by Supervisors . * Mentors peers on FAA regulation requirements for work in process . Additional Functions: * Researches for compliance from past history and problem solves shortages on documentation . Perform other duties as assigned. Other Requirements: * Requires accuracy and attention to detail. * Must possess strong analytical ability. * Detailed technical knowledge of aircraft theory, inspection processes and procedure requirements and how they integrate with aircraft records. * Thorough knowledge of aircraft logbooks and maintenance entries including proper aircraft work order documentation. * Must be proficient in the use of Microsoft Office applications. * Must be able to read, write, speak, and understand the English language. * Experience with foreign authority documentation desirable/not required. Additional Information Requisition Number: 229227 Category: Quality Assurance Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 01/24/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft Nearest Major Market: Savannah

Logistics Specialist II in GAC Savannah Unique Skills: At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission. * Able to pass math and reading assessment. * Must be able to obtain Q or PQ/RI stamp. * Demonstrate experience in materials coordination. * High written and verbal communication skills. * SAP experience preferred. * Basic knowledge of computer operation. * Forklift experience preferred. Education and Experience Requirements High School Diploma or GED required. 1 year experience in inventory/logistics. Proficiency in inventory systems and Microsoft Office preferred.. Valid Driver's License required. Position Purpose: Under limited supervision, perform advanced material handling, inventory coordination, and distribution tasks to support complex manufacturing and logistics operations. Ensure efficient and accurate movement, tracking, and documentation of materials while adhering to safety, quality, and regulatory standards. Provide guidance and support to the team and contribute to process improvements. Job Description Principle Duties and Responsibilities: Essential Functions: * Process pick tickets and material requests by pulling, issuing, and transporting parts to support manufacturing, service centers, spare parts sales, backshops and/or distribution centers . * Operate material handling equipment and company vehicles to move materials between departments and designated locations. * Unload, inspect, and document freight . * Maintain inventory accuracy through proper data entry and use of inventory management systems (i.e. SAP, Corridor, etc.) . * Coordinate material flow to support schedules and customer demands, including AOG and other critical needs . * Demonstrate a commitment to safety and quality throughout daily operations by following established procedures, identifying potential hazards, and ensuring all work meets regulatory and company standards . * Handle, transport and prepare shipment of Dangerous Goods in accordance with DOT, FAA and other applicable standards . * Ensure adherence to brand protection and material handling standards . * Elevate discrepancies with clear communication and follow-up actions . * Maintain clean environment . * Participate in improvement initiatives . * Ability to meet qualifications to obtain (one of) CDI, Q, PQ or RI stamps . * Support inventory accuracy goals through regular and accurate cycle counting . * Support inventory control processes by using handheld scanners for picking, putaway, and cycle count activities . Additional Functions: * Ability to obtain certification to operate material handling equipment and meet all training requirements . * Support Lean and sustainability initiatives . * Assist in inventory audits . * Perform other duties as required. (i.e. DOT, Hazmat, Special Offloads and Customs and Carrier requirements) . Perform other duties as assigned. Other Requirements: * Must be able to obtain certification to operate a forklift and other material handling equipment. * Able to comply with FAA Regulations and all Quality procedures to include documentation. * Must be able to lift 50 pounds. * Must be able to work all shifts and weekends. * Must have a valid driver's license. This job requires one to be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 230033 Posting Type: Internal-External Department: J0313-Main Warehouse Category: Materials Percentage of Travel: None Shift: First Employment Type: Full-time Salary Grade:L02 Number of Openings: 2 Posting End Date: 12/30/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft Nearest Major Market: Savannah

At Mitsubishi Power, we're not just building better clean energy technologies; we're architecting a better future. Our team is boldly redefining power generation to accelerate the world's energy transition. We operate as one team, pushing toward our vision of the future. We value problem solvers, prioritize collaboration, and support each other in an inclusive culture built on accountability and authenticity by demonstrating our values: Safety, Family, Innovative, Inclusive, Accountable & Courageous. Together, we're building the future we all aspire to - making net zero a reality. Role Overview De-burr, buff, blend, clean, grind, mask, and polish components/parts in accordance with company quality and production standards. Key Responsibilities Demonstrates our core competencies: Action oriented, change champion, customer-focused, developing self & others, and ownership File, sand, de-burr or polish parts. Perform assigned duties using manual, pneumatic and electric hand tools and machines. Manipulate work piece or tool manually. Develop and/or recommend techniques and parameters for blending/polishing. Inspect and measure work piece to verify conformance to specifications. Move machine control and guides to adjust machine. Replace worn machine accessories such as wheels and polish belts. Dress wheel for proper contour of work piece. Perform masking and cleaning operations. Perform machine maintenance as required Requirements At least 18 years of age. High school diploma, GED or equivalent. Applicants must be US Citizens of the United States without need for current or future employer-sponsored work authorization. Ability to pass routine background check and drug test per company policy. Preferred Qualifications: Associate's degree, certificate, or equivalent from two-year college or technical school; or two years related experience and/or training; or equivalent combination. Prior experience in a manufacturing or precision mechanical assembly environment. Strong attention to detail and a keen eye for quality. Ability to read, write, comprehend and follow instructions, short correspondence and memos. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percentage and to draw and interpret bar graphs. Ability to operate and understand using both SAE and Metric units of measure. Ability to understand and follow instructions (written, spoken, or shown in diagrams) and to solve basic problems with a few variables. Why Should You Apply? Excellent Benefits (Medical, Dental, Vision & 401K Matching). Excellent development programs and advancement opportunities. Tuition reimbursement and on-the-job training. Paid vacation, sick time, and holidays. Committed to quality products and services. Great working environment and culture. Employee Appreciation Programs and Event. Mitsubishi Power is an Equal Employment Opportunity (EEO) employer actively seeking to diversify the workforce and is committed to a policy of equal employment opportunity. Therefore, all qualified applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, disability, veteran status, or any other legally recognized protected basis under applicable law, are strongly encouraged to apply.

About the Company: Mitsubishi Power leads the industry in power generation and energy storage solutions. We design, manufacture, build, service, and optimize power systems worldwide. Our mission is to provide power generation and storage solutions to our customers, empowering them to affordably and reliably combat climate change and advance human prosperity. We manufacture the world's most efficient advanced class gas turbines and lead the development of tomorrow's digital power plants. About the Role: Mitsubishi Power is hiring Gas Turbine Technicians to join our high-performance team in Savannah, GA. This is a hands-on role where successful candidates will have experience with heavy machinery, precision tools, and mechanical assembly and directly contribute to building world-class energy solutions. As a Gas Turbine Technician, you will build large-scale gas turbine rotors. You'll use millwright skills to: Assemble and maintain heavy-duty rotating equipment using hydraulic torque tools, cranes, and precision measuring instruments. Interpret technical drawings and follow detailed work instructions. Use precision measuring equipment to take and record measurements as required by assembly drawings, work instructions, and quality requirements. Operate material handling equipment including overhead cranes, rigging systems, and industrial vehicles. Perform precision tasks such as grinding, honing, polishing, and blade pinning. Collaborate with engineering teams to improve processes and ensure top-tier quality. Use digital tools for job tracking, quality documentation, and training. What We're Looking For: We value hands-on experience and a strong mechanical mindset. Ideal candidates will have: Experience as a millwright, mechanical assembler, or in heavy equipment maintenance. Familiarity with hydraulic tools, torque and tensioning systems, and precision measuring devices including micrometers, calipers, taper gauges, laser measuring equipment, dial indicators, pressure gauges, etc. Ability to read and interpret mechanical drawings and schematics. Strong attention to detail and a commitment to safety and quality. A desire to grow into a long-term career in turbine assembly. Basic Qualifications/Requirements: At least 18 years of age. High school diploma, GED or equivalent. Applicants must have permanet work authorization without need for current or future employer-sponsored work authorization. Ability to pass routine background check and drug test per company policy. Preferred Qualifications: Technical certificate or associate degree in a mechanical field 2+ years of experience in mechanical assembly or equipment maintenance Comfortable working with both SAE and Metric units Strong teamwork and communication skills Why You Should Apply: Excellent Benefits (Medical, Dental, Vision & 401K Matching). Excellent growth and advancement opportunities. Tuition reimbursement and on-the-job training. Paid vacation, sick time and holidays. Committed to quality products and services. Great working environment and culture. Employee Appreciation Programs and Events. Physical Demands & Work Environment: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is regularly required to stand and frequently required to talk or hear. They are regularly required to walk, sit, and use their hands and arms. They must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. The employee is regularly exposed to moving mechanical parts. The noise level in the work environment is usually loud. Hearing protection may be recommended and/or required in some areas. Mitsubishi is an Equal Employment Opportunity (EEO) employer actively seeking to diversify the workforce and is committed to a policy of equal employment opportunity. Therefore, all qualified applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, disability, veteran status or any other legally recognized protected basis under applicable law, are strongly encouraged to apply.

Part-Time Apprentice - CNC Machinist - Student Opportunity Mitsubishi Power Americas, Inc. in Savannah, Georgia is seeking a Part-Time CNC Machinist to join our team as an Apprentice for up to one year. This opportunity is ideal for students currently enrolled in high school or a technical school who are looking to gain real-world, hands-on experience in a manufacturing environment - and potentially launch a long-term career with us. About the Role As a part-time CNC Machinist, you'll join our team of experienced machinists and embark on a rewarding journey to becoming a skilled professional. You'll learn alongside a qualified journeyman machinist, gaining hands-on experience with various machining techniques, blueprint reading, and operating sophisticated machinery. What You'll Do Assist experienced machinists in setting up, operating, and maintaining various machining equipment, including lathes, mills, grinders, and CNC machines (depending on company needs). Learn to read and interpret blueprints, machining instructions, and other technical specifications. Perform basic machining tasks under close supervision, ensuring parts meet required dimensions and tolerances. Maintain a clean and organized work area, following all safety protocols. Assist with material handling, tool setup, and other tasks as directed. Participate in classroom training to learn the theory behind machining processes, mathematics, and measurement. Demonstrate a strong work ethic, a willingness to learn, and a commitment to quality craftsmanship. What We're Looking For Must be 18 years of age or older. Enrolled in a technical or trade school program (either high school or technical college) with a completion date of May 2026 or beyond. Strong interest in manufacturing, mechanical assembly, industrial maintenance or other industrial trades. Excellent math skills, particularly in geometry and basic algebra. • Manual dexterity and good hand-eye coordination. Ability to follow instructions and work safely in a team and individual environment. Please Note This is a part-time, temporary role (up to 1 year). No company benefits are provided during the apprenticeship. This role is ideal for students seeking hands-on experience and potential career pathways. You will earn a competitive wage while developing valuable skills in a high-demand trade. Upon successful completion of the program, there is potential for a full-time Machinist position

Apprentice Upholstery Tech in GAC Savannah Unique Skills: High school diploma Basic computer literacy Strong attention to detail Adaptability Eager to learn Problem-solving mindset Education and Experience Requirements . Position Purpose: The Apprentice Upholstery Tech works along side higher level employees to fabricate and install upholstery, cover panels, and make simple patterns for aircraft interiors using design/engineering drawings and aircraft specifications. The Apprentice will participate in a two-year program in order to develop the skills necessary to perform as a fully proficient Upholstery Technician. This position is limited to only Completions Seat Shop departments. Job Description Principle Duties and Responsibilities: Essential Functions: * Perform technical upholstery functions within design, customer, FAA, and Gulfstream specifications. Specific installation and trim tasks are to be completed in compliance with work order instructions and specifications. * Fit panels and windows, cabin head liners, upper sidewalls, lower side panels, hatch panels, windows, cut and surge carpets, cover bulkheads, fabricate various metal parts, and covering and installation of panels. * Create carpet patterns per design drawings and complete installation. * Use the material tracking system to create parts demand, track squawks and to sign-off work. Perform other duties as assigned. Other Requirements: * Ability to read, write, speak and understand the English Language. * Ability to read and interpret blueprints and engineering documentation. * Ability to use measuring tools and perform basic math computations. * Must be computer literate. * Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. This job requires one to be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 230253 Category: Operations Percentage of Travel: None Shift: First Employment Type: Full-time Posting End Date: 01/31/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft Nearest Major Market: Savannah

RS Structural Mech II in GAC Savannah Unique Skills: This posiiton is for 1st shift - Weekday days. Also, this position is for any Hangar in the Savannah Service Center. Avionics Structure Mechanic position. Structure Mechanic experience. Read and interpret Mechanical Drawings/Schematics. Perform assigned tasks with minor guidance. Education and Experience Requirements High School Diploma or GED required. 2 years related structural assembly experience. Experience working with Solumina and Smarteam preferred.. Position Purpose: In a team oriented work environment, under minimal supervision, Structural Mech II performs a variety of structural assembly operations in a production department following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Job Description Principle Duties and Responsibilities: Essential Functions: * Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft . * Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structure . * Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents . * Check all work and ensure a defective free assembly prior to final inspection . * Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) . * Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information . * Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity . * Maintain a neat and orderly work area, supports the company 5S Program, and complies with all safety regulations. Use personal protective equipment as required. * Able to work with minimal supervision on duties and tasks . * Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.) . * Properly use and maintain company-provided tools and equipment and returns items to tool room after use . * Ensure standard operating procedures are followed when operating ground support equipment . Additional Functions: * Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags . * Ensure accurate daily job charging to the aircraft . * Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership . * Assist in maintaining shop equipment and associated JSAs . * Support Lean Activities . Perform other duties as assigned. Other Requirements: * Must be able to read and interpret blue prints. * Basic computer skills and basic shop math skills. * Must be able to read a scale and perform basic shop math. * Read and comprehend basic documents and instructions. * Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules. * Must demonstrate good housekeeping and safety practices. * Ability to work with composite resins and materials. * Must be able to work any shift. * Must be able to climb ladders/stands/stairs and work in small spaces or restricted areas & lift 50 lbs. * Must be able to read, write, speak, and understand the English language. This job requires one to be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 229895 Category: Operations Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 01/31/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft Nearest Major Market: Savannah

Cabinet Maker I in GAC Savannah Unique Skills: * Attention to Detail: Crucial for precision in measurements. * Eagerness to Learn: A strong desire to absorb new techniques and follow instructions. * Reliability & Work Ethic: Showing up, being responsible, and working efficiently. * Teamwork: Collaborating effectively in a workshop. * Problem-Solving: Adapting to challenges and finding solutions. * Physical Stamina: Ability to stand, lift, and work in a potentially dusty environment. Education and Experience Requirements High School Diploma or GED required. Wood working, wood finishing or auto body & painting experience in a technical environment or completion of Technical Certificate in cabinet making preferred. and/or completion in current year youth apprenticeship program, in area of expertise. Position Purpose: Under direct supervision, learns and performs the basic skills and functions related to fabrication of aircraft cabinets and other wood-surfaced subassemblies using design and engineering drawings. Job Description Principle Duties and Responsibilities: Essential Functions: * Learns entry-level technical skills and knowledge, regulatory requirements and tooling used in aircraft cabinetmaking. Continues to develop technical competency and problem solving abilities to allow progression to the technician level. * Using standard safety and operating procedures, design/engineering drawings, tools and other materials (laminates, veneers, cap strips), develops proficiency in the preparation and making of furniture. . * Utilizes the material tracking system to create parts demand, track squawks and to sign-off completed work. * Complies with all safety, 5S, and housekeeping policies, uses personal protective equipment; ensures aircraft interior is protected. Assists in the development and implementation of related initiatives. . Perform other duties as assigned. Other Requirements: * The ability to read, write, speak, and understand the English language. * Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. * Must be computer literate. This job requires one to be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 230501 Category: Operations Percentage of Travel: None Shift: First Employment Type: Full-time Posting End Date: 03/31/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft Nearest Major Market: Savannah

RS Avionics Elec Tech III in GAC Savannah Unique Skills: This requisition is generated for all Savannah service centers and candidates must be able to work any shift. At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission. Education and Experience Requirements High School Diploma or GED required. 5 years experience in an avionics/electrical career field. 2 years of accredited schooling in aviation electronics may offset two years of experience requirement. A & P license, FCC license or NCATT certification preferred. Position Purpose: Provides technical expertise while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Job Description Principle Duties and Responsibilities: Essential Functions: * Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting . * Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system . * Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems . * Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring . * Oversees the performance and compliance with engineering changes and modifications as required. * Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability . * Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . * As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time . * Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. * Enforces the company FOD program, tool control program, 5-S program and all safety regulations . * Adapts to sudden schedule changes . * Coordinates with other disciplines concerning projects . Additional Functions: * Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system . * Self inspection capability for all avionics testing functions in applicable areas . * In support of acft certification and final phase testing, may include flight tests on acft as required. . Perform other duties as assigned. Other Requirements: * Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. * APU run qualification and engine run qualification preferred. * Ability to read and interpret basic blueprints and schematic diagrams. * Must be able to read, write, speak, and understand the English language. This job requires one to be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 230287 Category: Service Center Percentage of Travel: Up to 25% Shift: Multiple Shifts Employment Type: Full-time Posting End Date: 04/07/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft Nearest Major Market: Savannah

About the Company: At Mitsubishi Power, we're not just building better clean energy technologies; we're architecting a better future. Our team is boldly redefining power generation to accelerate the world's energy transition. We operate as one team, pushing toward our vision of the future. We value problem solvers, prioritize collaboration, and support each other in an inclusive culture built on accountability and authenticity by demonstrating our values: Safety, Family, Innovative, Inclusive, Accountable & Courageous. Together, we're building the future we all aspire to - making net zero a reality. Summary: Mitsubishi Power in Savannah, GA is seeking experienced TIG Welders skilled in various welding techniques and stress relief processes. Ideal candidates will be proficient in Shielded Metal Arc (SMAW), Gas Tungsten Arc (GTAW/TIG), Metal Inert Gas (MIG), and Plasma Arc Welding (PAW), and capable of operating metal fabrication equipment such as oxy-acetylene and plasma cutting torches, PWHT systems, and vacuum furnaces with minimal supervision. Essential Duties and Responsibilities: Set up components and perform basic digital programming on welding equipment. Interpret drawings and work instructions to prepare and assemble parts using cutting and abrasive tools. Accurately locate and measure surfaces per specifications and perform detailed inspections. Learn and demonstrate welding techniques using SMAW, TIG, PAW, MIG, and Laser; train others as needed. Apply and understand penetrant inspection methods (e.g., red-dye, fluorescent). Control and correct distortion and heat input during welding processes. Contour welds to meet complex, close-tolerance configurations using appropriate tools. Recommend and support continuous improvement initiatives in production processes. Operate furnaces and stress relief equipment. Perform preventive maintenance on assigned equipment. Carry out additional duties as assigned. Additional Duties: Adhere to all safety policies and report unsafe conditions to Management or HR. Actively contribute to team goals in safety, quality, cost, delivery, and productivity. Communicate effectively across all levels of the organization. Maintain confidentiality and protect proprietary information. Comply with the company's drug policy and pass random screenings. Uphold high standards of honesty, integrity, and professionalism. Maintain a clean and organized work environment. Foster a positive and collaborative team culture. Basic Qualifications/Requirements: Must be at least 18 years old. High school diploma, GED, or equivalent. Permanent work authorization without the need for current or future employer sponsorship required. Ability to pass background check and drug screening per company policy. Preferred Qualifications: Minimum 2 years of TIG/GTAW welding experience. Associate degree, certificate, or equivalent in Welding from a technical school or two years of relevant experience/training. Strong desire to grow in a long-term career in rotor assembly. Effective communication skills in one-on-one and small group settings. Proficient in basic math, including fractions, decimals, ratios, and percentages. Ability to interpret bar graphs and technical drawings. High attention to detail and commitment to quality. Strong manual dexterity and hand-eye coordination. Proficiency in both SAE and Metric measurement systems. Ability to follow written, verbal, and diagram-based instructions and solve basic problems. Why You Should Apply: Excellent benefits (Medical, Dental, Vision & 401K Matching). Career growth and advancement opportunities. Tuition reimbursement and on-the-job training. Paid vacation, sick leave, and holidays. Commitment to quality and innovation. Supportive work environment and culture. Employee appreciation programs and events. Physical Demands & Work Environment: Regularly required to stand, walk, sit, talk, and use hands/arms. Must frequently lift/move up to 25 lbs and occasionally up to 50 lbs. Regular exposure to moving mechanical parts and loud noise; hearing protection may be required. Mitsubishi Power is an Equal Employment Opportunity (EEO) employer committed to workforce diversity. All qualified applicants-regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, disability, veteran status, or any other legally protected status-are strongly encouraged to apply.

Repair Cntrl Assoc II in GAC Savannah Unique Skills: Shift hours: Wednesday - Saturday 7:00 am to 5:30 pm (4x10's) Repair Control Field Support At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission. Education and Experience Requirements High School Diploma or GED required. 4 years customer service experience, preferably in a repair/overhaul capacity. Aerospace experience preferred.. Position Purpose: Under limited supervision, coordinate, administer and monitor aircraft component and /major assembly repairs from pre-planning to post service follow-up for company and customer owned inventory, as appropriate to area of specialization. Job Description Principle Duties and Responsibilities: Essential Functions: * Maintain accurate, real-time records of parts out to vendors for overhaul/repair; exchange items due from operators. Pursue process through to completion. * Coordinate with spares inventory control and in-house shops to ensure timely delivery of detail parts as required. for overhaul/repair of company and customer owned parts. * Coordinate the repair/overhaul of exchange units. * Liaise with other departments for in-house shops on correct pricing for customer owned property. * Build customer and vendor relationships in order to meet customer aircraft parts requirements. * Process customer owned property to vendor for repair/overhaul after reviewing terms and conditions of customer purchase order to determine proper disposition within Gulfstream procedures. * Analyze reports to monitor, vendor delivery schedules to ensure timely turnaround of repaired/overhauled items. * Maintain admin files and submit reports governing repair/overhaul program as required. * Maintain contact with customers, field representatives and outside sales representatives both prior to and during any unscheduled maintenance to fulfill any and all parts requirements. * Work with finance department to ensure customer credit line is established and coordinate induction invoice. * Work in concert with the Purchasing department and in-house repair shops to provide accurate pricing and quotes in a timely manner for aircraft components being repaired / overhauled. * Monitor the cost of ongoing customer property repairs/overhauls, job charging, and parts purchasing to maintain the dollar amount quoted to the customer. * Takes a proactive approach to coordinate with credit reps and assures all accounts stay in good standing. * Work closely with customer and Gulfstream sites to ensure that repair/overhaul requirements are fulfilled, schedules are met, pricing is accurate, and components are shipped. * Ensures invoices, including supplemental bills, are processed within established guidelines. Additional Functions: * Participate in training new staff members and impart business knowledge, skills and experience. . * Prepare reports pertaining to current status of work orders. Analyze and take necessary actions to update customers and follow up with appropriate internal work groups. . * Work directly with outside vendors to achieve the highest quality and quickest turn-around possible to ensure absolute support of the aircraft. . * Monitor group email and assign to Repair Control Associates or respond to customers as appropriate. . * Coordinate additional support for customer repairs/overhauls to include rental or loaner units, special vendor exchanges, vendor warranty, etc. . * Assist Product Support business office in resolution on accounts receivables issues. . * Provide support to outside R&O sales managers (pricing, quotes, and customer inquiries). . Perform other duties as assigned. Other Requirements: * Basic understanding of cost control financial principles. * Strong written and verbal communication skills. * Must be able to read and interpret applicable aircraft maintenance manuals, IPCs, ASCs, CBs, and service bulletins. * Must be computer literate and use necessary software (Microsoft Office products are required. and Microsoft Access is preferred). This job requires one to be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 230549 Category: Service Center Percentage of Travel: Up to 25% Shift: Multiple Shifts Employment Type: Full-time Posting End Date: 01/30/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft Nearest Major Market: Savannah

RS QC Analyst Sr A&P in GAC Savannah Unique Skills: At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission. Good communication skills Excellent computer skills in Excel, Word and presentation applications Ability to professionally articulate and consultatively communicate the outfitting options on the various aircraft. Current working knowledge of applicable FAA, EASA, CAAC and other civil aviation authority regulations and certification requirements and familiarity with international certification requirements as applicable to aircraft outfitting Must be willing to support customer needs during and after normal working hours. Education and Experience Requirements Bachelor's Degree in related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 6 years of airworthiness experience with in any of the following areas 14CFR Parts 23, 25, 27, 29, 33 and/or Parts 91, 121,125,135,145 or 6 years of military aviation maintenance experience. General knowledge of Federal Aviation Regulations, Advisory Circulars, FAA forms and documents, as well as any foreign authority documentation. A&P (FAA Airframe and Powerplant) license required. Position Purpose:Under minimal supervision, performs Return to Service oversight and assists subordinates in the general and technical aspects of Quality Control Return to Service requirements to ensure aircraft airworthiness is maintained in a timely and efficient manne.Job Description Principle Duties and Responsibilities:Essential Functions: Prepares and schedules aircraft documentation with the QC Analysts and Inspection team. Reviews all documents and work orders prior to return to service of the aircraft and ensures aircraft returns to service in accordance with current FARs and company policy . Oversees, develops and implements documents for QC utilization . Coordinates new STCs, Aircraft Flight Manual Supplements and FAA Form 337 field approval of avionics and mechanical installations with Engineering Certification group and the FAA . Assists with the activity of Special Flight Permits, Standard Airworthiness certificates, Export certificates, etc . Focal point for the Inspection team. Assures technical data for CMP, Engineering, Technical Services, Avionics and other Service Center oriented departments . Focal point for customers after departure for questions pertaining to the work scope of the maintenance visit on compliance, research, and documentation . Assists customers with all activities relating to previous and present maintenance performed on aircraft . Focal point in office to notify and work with QC Management when foreign authoritys modification approval is required. Assures security of aircraft records in our possession . Attends any required. meetings as delegated by Supervisor and identifies critical path issues for Return to Service . Primary trainer for QC Analyst Assistants and QC Analyst . Performs any other tasks/duties as assigned by Supervisors . Mentors peers on FAA regulation requirements for work in process . Additional Functions: Researches for compliance from past history and problem solves shortages on documentation . Perform other duties as assigned.Other Requirements: Requires accuracy and attention to detail. Must possess strong analytical ability. Detailed technical knowledge of aircraft theory, inspection processes and procedure requirements and how they integrate with aircraft records. Thorough knowledge of aircraft logbooks and maintenance entries including proper aircraft work order documentation. Must be proficient in the use of Microsoft Office applications. Must be able to read, write, speak, and understand the English language. Experience with foreign authority documentation desirable/not required. Additional Information Requisition Number: 229227 Category: Quality Assurance Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 01/24/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Logistics Specialist II in GAC Savannah Unique Skills: Able to pass math and reading assessment. 2. Must be able to obtain Q or PQ/RI stamp. 3. Demonstrate experience in materials coordination. 4. High written and verbal communication skills. 5. SAP experience preferred. 6. Basic knowledge of computer operation. 7. Forklift experience is preferrred. Education and Experience Requirements High School Diploma or GED required. 1 year experience in inventory/logistics. Proficiency in inventory systems and Microsoft Office preferred.. Valid Driver's License required. Position Purpose: Under limited supervision, perform advanced material handling, inventory coordination, and distribution tasks to support complex manufacturing and logistics operations. Ensure efficient and accurate movement, tracking, and documentation of materials while adhering to safety, quality, and regulatory standards. Provide guidance and support to the team and contribute to process improvements. Job Description Principle Duties and Responsibilities: Essential Functions: * Process pick tickets and material requests by pulling, issuing, and transporting parts to support manufacturing, service centers, spare parts sales, backshops and/or distribution centers . * Operate material handling equipment and company vehicles to move materials between departments and designated locations. * Unload, inspect, and document freight . * Maintain inventory accuracy through proper data entry and use of inventory management systems (i.e. SAP, Corridor, etc.) . * Coordinate material flow to support schedules and customer demands, including AOG and other critical needs . * Demonstrate a commitment to safety and quality throughout daily operations by following established procedures, identifying potential hazards, and ensuring all work meets regulatory and company standards . * Handle, transport and prepare shipment of Dangerous Goods in accordance with DOT, FAA and other applicable standards . * Ensure adherence to brand protection and material handling standards . * Elevate discrepancies with clear communication and follow-up actions . * Maintain clean environment . * Participate in improvement initiatives . * Ability to meet qualifications to obtain (one of) CDI, Q, PQ or RI stamps . * Support inventory accuracy goals through regular and accurate cycle counting . * Support inventory control processes by using handheld scanners for picking, putaway, and cycle count activities . Additional Functions: * Ability to obtain certification to operate material handling equipment and meet all training requirements . * Support Lean and sustainability initiatives . * Assist in inventory audits . * Perform other duties as required. (i.e. DOT, Hazmat, Special Offloads and Customs and Carrier requirements) . Perform other duties as assigned. Other Requirements: * Must be able to obtain certification to operate a forklift and other material handling equipment. * Able to comply with FAA Regulations and all Quality procedures to include documentation. * Must be able to lift 50 pounds. * Must be able to work all shifts and weekends. * Must have a valid driver's license. This job requires one to be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 230036 Posting Type: Internal-External Department: J0313-Main Warehouse Category: Materials Percentage of Travel: None Shift: First Employment Type: Full-time Salary Grade:L02 Number of Openings: 2 Posting End Date: 12/30/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft Nearest Major Market: Savannah

Flight Test - Aircraft Maintenance Tech III A&P - 2nd Shift in GAC Savannah Unique Skills: Gulfstream experience preferred Education and Experience Requirements High School Diploma or GED required. 3 years aviation maintenance experience (avionics, electrical, and/or mechanical). A&P (FAA Airframe and Powerplant) license required. Valid Driver's License required. Position Purpose: Perform various technical functions of aircraft maintenance, repair, replacement, and modification of key aircraft components to ensure proper operation. Perform aircraft maintenance and perform troubleshooting and repair duties requiring accuracy and skill. Job Description Principle Duties and Responsibilities: Essential Functions: * Perform required. maintenance and necessary servicing of all aircraft mechanical systems . * Repair, maintain, install, and troubleshoot mechanical and functional components of the aircraft including airframes, engine components, landing gear, electrical components, and control systems . * Coordinate with inspection to ensure compliance with internal and FAA inspection and documentation requirements . * Properly complete work order sign-offs, shift turnovers, and other paperwork in a timely manner . * Ensure that all work accomplished meets quality standards and specifications . * Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely . * Follow standard operating procedures and JSAs when operating ground support equipment . * Operate and oversee use of special support equipment used in removal and installations of major components . * Coordinate with other departments to arrange for the overhaul or repair of customer property as needed . Additional Functions: * Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean . * Properly use and maintain company-provided tools and equipment . * Coordinate movement of aircraft, as required. . * Maintain advanced knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures . Perform other duties as assigned. Other Requirements: * Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems. * Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). * Must be able to read, write, speak, and understand the English language. This job requires one to be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 230486 Category: Service Center Percentage of Travel: None Shift: Second Employment Type: Full-time Posting End Date: 02/06/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft Nearest Major Market: Savannah

Cabinet Maker II in GAC Savannah Unique Skills: * Woodworking: Cutting, shaping, sanding, milling, and assembling wood. * Tool Proficiency: Safe and effective use of hand tools (saws, routers, drills) and complex machinery (CNC routers). * Joinery: Expertise in techniques like dovetail, mortise and tenon, and dado joints. * Measurement & Layout: Precision measuring and marking using various tools. * Blueprint Reading: Interpreting technical drawings and designs. * Material Knowledge: Understanding wood properties, laminates, hardware, and adhesives. Education and Experience Requirements High School Diploma or GED required. Basic knowledge of cabinetmaking processes, products and tools. Two (2) years experience in cabinetmaking. Experience in aerospace industry preferred.. Possess a working knowledge of Gulfstream inspection and process specifications preferred. Position Purpose: Under general supervision, fabricates aircraft furniture and other wood-surfaced subassemblies using aircraft specifications, design and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship. Job Description Principle Duties and Responsibilities: Essential Functions: * Works under general supervision to fabricate furniture and other wood-surfaced subassemblies using blueprints, aircraft specifications and design/engineering drawings. * Assembles, pins and glues cabinet shells. Installs drawer-slides, hinges, latches and other hardware in subassemblies. Applies exterior surface materials such as laminates, veneers, and cap strips. * Uses various types of stationary and hand-held power tools to fabricate or disassemble furniture. * Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior. * Uses the material tracking system to create parts demand, track squawks and to sign-off work. Additional Functions: * Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques. . Perform other duties as assigned. Other Requirements: * The ability to read write, speak, and understand the English language. * Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. * Must be computer literate. This job requires one to be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 230503 Category: Operations Percentage of Travel: None Shift: First Employment Type: Full-time Posting End Date: 03/31/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft Nearest Major Market: Savannah