Assembler jobs at L3Harris - 722 jobs

Assembly B
L3Harris 4.4
Assembler job at L3Harris
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Assembly B Job Code: 31506 Job Location: Mason, OH Schedule: 9/80 About L3Harris Technologies: L3Harris Technologies is an agile global aerospace and defense technology innovator, delivering end-to-end solutions that meet customers' mission-critical needs. The company provides advanced defense and commercial technologies across space, air, land, sea and cyber domains. L3Harris has approximately $18 billion in annual revenue and 47,000 employees, with customers in more than 100 countries. Job Description: As an Assembler B you will be responsible for a variety of assembly operations tasks-assembling precision electro-optical semiconductor components, soldering under levels of optical magnification. Additionally, you will be responsible for following standard practices and procedures to operate leaded equipment. Essential Functions: + Complete assigned solder processes as required (ie. Soldering components, configuring cabling, and configuring wires) + Support group objectives for on-time delivery + Assemble mechanical and/or electrical components for customer deliverables + Verify use of most updated procedures + Follow industry standard or practice for 6S + Perform torque training, inspection of hardware, and mechanical assembly + Crimping cables with a wide range of tools (ex. Hand crimping tools). + Assist is guiding peers in completing daily tasks Qualifications: + Requires a High School Diploma or equivalent and a minimum of 4 years of prior relevant experience or 2 years post-Secondary/Associates Degree with 0 to 2 years of prior related experience. + 2 years or more expeience in proficient computer skills, including ability to navigate email and Microsoft office. + 1 years or more experience in reading and following drawings and work instructions. + 1 years or more experience in effective communication. + 2 years or more experience with the use of basic hand tools such as screwdrivers, plyers, wire strippers, etc. + 1 years or more experience in using a microscope for long periods of time. + Must be a United States Citizen. Physical Requirements: + Prolonged sitting at a desk and working on a computer + Must be able to lift up to 15 pounds at times + Prolonged standing + Must be able to move from lab to lab and inside the lab that you are located in L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English (******************************************************************************************** or Spanish (******************************************************************************************** . For information regarding your Right To Work, please click here for English (****************************************************************************************** or Spanish (******************************************************************************************** .
$33k-42k yearly est. 55d ago

Looking for a job?

Let Zippia find it for you.

Assembly Lead
Bray International, Inc. 4.3
Houston, TX jobs
Lead and oversee day shift assembly activities to ensure productivity, quality, and adherence to company standards. Actively participate in the assembly, testing, and operation of industrial valves. Utilize ERP systems to track work orders, inventory Assembly, Lead, Manufacturing, Business Services, ERP
$57k-88k yearly est. 8d ago
ASSEMBLER
Advantech Industries, Inc. 4.5
Rochester, NY jobs
Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as an Assembler. The Assembler is responsible for the assembly of product according to the project specifications, assisting with the final product preparation for delivery while visually inspecting parts and assembled pieces for defects. Successful candidates will possess: A HS Diploma or GED; 1-2 years of previous manufacturing experience; Ability to use an air gun, air drivers, other hand and power tools and a pallet truck; Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001:2015; Skills to operate assigned equipment safely and efficiently; Capacity to handle changes in business operations and adjust to new situations; Preparedness to sit for extended periods and manipulate items with dexterity; Ability to work with limited supervision. What we offer: Monday through Friday 7:30 am to 4:00 pm; Full time employment (39.75 hours per week); Medical (3 HDHP offered), Dental and Vision Plans Vacation, Paid Sick Leave and Company Paid Holidays Company Paid Life Insurance Optional Short-Term and Long-Term Disability Available 401k with Company Match According to the New York Pay Transparency law, pay range for this job is $18.00 - $27.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full time employment (39.75 hours per week)
$18-27 hourly 8d ago
Assembler / Operator (SDKY) - 3rd Shift
U.S. Tsubaki Power Transmission, LLC 4.2
Sandusky, OH jobs
The TSUBAKI name is synonymous with excellence in quality, dependability and customer service. U.S. Tsubaki is a leading manufacturer and supplier of power transmission and motion control products. As a part of a vast, international network of corporate and industrial resources, Tsubaki offers its customers the finest state-of-the-art products available in the world and we strive to be the "Best Value" supplier in the industry. Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Performs setups and adjustments of machinery for assembling metal chain parts Interprets job specifications and reads blueprints. Inspects products to verify conformance utilizing various measuring devices. Assembles parts to product specifications per print. Maintains record keeping for jobs and inventory. Coordinates with others to achieve maximum throughput and meet department and company goals. Ensures compliance with OSHA regulations and workplace safety regulations. Operates material handling equipment including but not limited to forklifts, cranes and hoists. Uses good judgment and works in a safe responsible manner. Other tasks/functions as assigned. General knowledge and ability to safely use hand tools. Other tasks, functions and projects as assigned. Requirements: High school diploma or equivalent preferred; equivalent relevant experience may be considered 1 - 2 years manufacturing related experience. Ability to input to and retrieve from computer based software programs. Able to perform moderately active work typical of a manufacturing plant environment. Examples include pushing, pulling, lifting, standing, bending, twisting. Safety Sensitive position Exhibits required in-depth job knowledge and skills Able to solve problems and determine a course of action Troubleshoots and anticipates problems Has the ability to influence others in the work group in a positive manner Can prioritize the work and coordinate with others Fosters a team environment Supports complex customer's needs/requests Exhibits a sense of urgency to get the job done Understands, responds and supports fostering good employee relations Exhibits punctuality and dependability U.S. Tsubaki offers: A competitive compensation package, including health benefits effective on date of hire, generous 401(k) match and profit sharing, education reimbursement, and annual bonus potential Paid Time Off ("PTO") 90-day and 180-day performance reviews Shift differential pay for 2nd and 3rd shift Weekly bonus potential Paid training Shift: 4 days a week, 10 hours per day. Days: Monday - Thursday (standard schedule). Overtime may be required on Fridays/Saturdays according to business needs. Learn more about U.S. Tsubaki at: ************************* The estimated salary range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, experience, and other relevant factors. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 PI8945f93b3bdf-37***********6
$25k-32k yearly est. 6d ago
Automotive Assembler/Integrator
CDM Technology 3.6
Carlsbad, CA jobs
Technician, Automotive Build Technician, Automotive Build Carlsbad, California | Engineering | Full-time About the role We're looking for a detail-oriented and driven Automotive Build Technician to join our team. In this hands-on role, you'll be integral to the prototyping, assembly, and development of cutting-edge automotive systems and vehicles. You'll work closely with engineers and fellow technicians to bring high-performance concepts and pre-production builds to life. What you'll do Assemble prototype and low-volume production vehicles according to engineering specifications Install and test mechanical, electrical, and structural components Troubleshoot issues across chassis, powertrain, electrical, and body systems Collaborate with engineering teams to support design iterations and modifications Operate diagnostic and calibration tools to validate system performance Maintain clear documentation and contribute to build process improvements Ensure compliance with safety and quality standards throughout all stages of build Qualifications Proficient in using hand tools, power tools, and diagnostic equipment Familiarity with vehicle subsystems including suspension, brakes, drivetrain, and electrical systems Ability to read technical drawings, wiring diagrams, and CAD prints Strong problem-solving and communication skills Valid driver's license and clean driving record [Optional:] Automotive Technician Certification (e.g., ASE) Preferred Qualifications Experience working with electric vehicles or advanced mobility platforms TIG/MIG welding and fabrication skills welcomed Knowledge of CAN bus systems and diagnostic software Familiarity with vehicle telemetry systems or data acquisition tools Team Structure Individual contributor; collaborate with other teams and individuals, as necessary Required Experience 3+ years of experience in automotive assembly, fabrication, or prototyping Educational Requirements High school diploma or equivalent Salary + Benefits Market competitive compensation package Stock option grants Fully funded benefits package for employee + dependents Generous Flexible Time Away policy
$28k-35k yearly est. 3d ago
Electronics Assembler - 1st Shift
Annapolis Micro Systems 4.1
Annapolis, MD jobs
Are attention to detail and excellent soldering abilities among your key strengths? Do you enjoy reading schematics and implementing ECOs? Can you see yourself playing an important role on a team dedicated to producing world-class quality electronic products? Annapolis Micro Systems is searching for dedicated and passionate Assemblers to join our production team and take pride in sending products to test with zero defects. Founded in 1982 and located in beautiful Annapolis, Maryland, we have a long history of designing and building the highest-performing embedded computing products. We offer the variety, challenge, and stability you are looking for. We perform both government and commercial work, and members of our small, tight-knit team get to wear multiple hats. Our production team is a close-knit group of professionals who are upbeat, talented, and extremely proud of their work and the cutting-edge products they produce. We use automated Surface Mount Technology (SMT) equipment to assemble our own high-quality printed circuit cards. Join us today and become part of the future of computing technology! This position will be on the 1st shift, 6:00 a.m. to 3:00 p.m., Monday through Friday. Essential Duties and Responsibilities Solder THT and SMT components per IPC A 610 Class III Standards Rework and touch up per IPC A 610 Class III Standards Assemble PCBs into complex modules Build cable and chassis assemblies Press-fit connectors using a benchtop manual press Implement ECOs Inspect incoming material: PCBs, panels, heatsinks, etc. Complete final assembly of products Build prototypes for Engineering using schematics Keep Manufacturing consumables stocked, communicate stock levels and requirements to Purchasing team Requirements Minimum High School or equivalent Certified to J-STD-001 preferred Excellent Soldering Skills Manual Dexterity Able to lift 20 lbs U.S. Citizenship
$24k-31k yearly est. 2d ago
Electromechanical Assembler
Global Edge Group 4.2
Houston, TX jobs
The Global Edge Consultants, LLC is an Equal Opportunity Employer. The Global Ede Consultants, LLC does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need. POSITION OVERVIEW: We are seeking motivated and detail-oriented Electromechanical Assemblers to support various assembly lines within our client's manufacturing operations. This role plays a critical part in producing high-quality, custom power solutions that meet customer requirements across multiple industries, including healthcare, data centers, education, government, and commercial construction. The Electromechanical Assembler is a key contributor to our client's mission of delivering durable, accurate, and innovative products while supporting the company's long-term strategic objectives RESPONSIBILITIES AND ESSENTIAL DUTIES: Perform mechanical and electrical assembly operations according to work instructions, process sheets, and SOPs Assemble electromechanical components using hand tools and power tools Read and follow assembly instructions, diagrams, and basic blueprints Inspect parts and completed assemblies to ensure quality, accuracy, and conformance to specifications Safely operate machinery and equipment used in the assembly process Accurately record production data, material usage, and scrap amounts Maintain clean, organized, and safe workstations in compliance with safety requirements Collaborate with team members and cross-functional partners to meet production goals Follow all safety policies, procedures, and PPE requirements (eye, hand, foot, and hearing protection) Support continuous improvement efforts by identifying issues and driving resolution Perform other duties as assigned MINIMUM REQUIREMENTS: Basic Qualifications High school diploma or equivalent Minimum 2 years of experience in a manufacturing environment Ability to read instructions, safely operate machines, and visually inspect parts Demonstrated accuracy and timeliness in completing work assignments Ability to lift and carry up to 50 lbs on an intermittent basis Ability to perform frequent lifting, standing, bending, and reaching Ability to pass a pre-employment physical and drug test Must adhere to all PPE and safety requirements Additional Qualifications Technical secondary education preferred Basic computer skills with accurate data entry experience Ability to perform simple math for interpreting process sheets, SOPs, tally sheets, and tracking materials Basic understanding of mechanical and electrical assembly Ability to read and interpret electrical schematics and diagrams preferred Proficient use of hand tools and power tools Good hand dexterity and grip strength Strong collaboration skills in a cross-functional team environment Analytical thinker with demonstrated problem-solving ability Well organized, detail-oriented, and able to multi-task effectively Self-motivated with the ability to take initiative and work with minimal supervision High personal integrity and ethical standards The Global Edge Consultants, LLC is an Equal Opportunity Employer. The Global Ede Consultants, LLC does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.
$28k-36k yearly est. 3d ago
Assembler, General (TN) - 1st Shift
Us Tsubaki Automotive, LLC 4.2
Portland, TN jobs
The TSUBAKI name is synonymous with excellence in quality, dependability, and customer service. U.S. Tsubaki Automotive, LLC is an international tier-one supplier of high-speed chain drive systems to the automotive industry. The Assembler, who works under the direction of the Production Supervisor is responsible for producing parts by assembling parts and subassemblies by hand or with simple machinery. Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Follow work instructions and/or route sheets, assemble and/or pack products for various departments. Inspect machine at beginning of shift and notates on check sheet. Clean and/or lubricate machinery as required. Inspect and place parts in designated trays. Meet specified quantity and quality guidelines. Maintain equipment in a clean and orderly condition. Reports faulty operation or defective material to supervisor Conducts visual quality inspections Ability to place product in container while on different types of work surfaces, such as slick or slippery, and on different levels. Monitor machines Ability to work in a fast-paced environment. Ability to work in different environments such as a slick work surface, climbing steps to retrieve product in a machine. Ability to work with heavy machinery (Milling Machines, Injection Molding, Etc.) Ability to work in dimly lit areas. Requirements: High school diploma or equivalent preferred; equivalent relevant experience may be considered. One to three months related experience and/or training. Manual dexterity and ability to use various machines. Attention to detail. Ability to read a limited number of two-and three syllable words and to recognize similarities and differences between words and between series of numbers. Ability to print and speak simple sentences. Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using weight measurement. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Basic computer skills. Basic problem solving or troubleshooting skills. Ability to work with a team. Physical Activity/Mode: Climbing, balancing, stooping, kneeling, crouching, crawling, walking, standing, lifting, reaching, pulling, fingering, grasping, talking, hearing. Heavy work: exerting up to 100 pounds of force frequently and/or up to 20 pounds of force constantly to move objects. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequently exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate. Learn more about U.S. Tsubaki at: ************************* U.S. Tsubaki offers a competitive compensation and benefits package, including health benefits effective on date of hire, dental and vision benefits effective on the first of the month following date of hire, Paid Time Off ("PTO"), 10 paid holidays, generous 401(k) match and profit sharing, annual bonus potential, life insurance, short and long-term disability, flexible spending accounts, commuter benefits, education reimbursement, home and auto insurance discounts, and pet insurance. The estimated salary range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, experience, and other relevant factors. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 PIe272a8b01884-37***********5
$21k-30k yearly est. 7d ago
Assembler
UKG Organic 4.6
Strongsville, OH jobs
Job Description Heroux-Devtek, the world's 3rd largest producer of landing gear, serves the civil and military aerospace markets from production facilities in North America, Europe and United Kingdom. The Company's longevity, flexibility, and track record for the development and implementation of innovative production systems have distinguished it as a leader in the domain. With its most recent acquisitions, Heroux-Devtek is bolstering its status as one of the foremost landing gear, actuation and hydraulic system designers and manufacturers in the global aerospace industry. Information on the division: Located in Strongsville, the 90+ employee facility (100,000 sq. ft.) is one of Héroux-Devtek's centers of excellence for the final assembly of landing gear. As part of the Central Division you will lead P&L responsible for critical machining operations of major commercial aircraft programs such as the Boeing 777 and Embraer E-2, and important military programs as F-18, F-35, C-17 and C-130. With a strong focus on latest technology of the manufacturing processes with machining automation and techniques we aim to remain the best value producer of complex landing gear components. What we offer? Leaders who invest in your success, development, and growth A culture of true teamwork and pride in our product Competitive salaries linked to performance and paid time off 11 paid holidays A comprehensive group insurance plan including a HAS/FSA options, Dental & Vision Supportive wellness program, including healthcare discounts Automatic Life Insurance with supplemental options Short and Long Term Disability Insurance Opportunities for retirement savings with 401k plans including a company match Tuition reimbursement for relevant Certifications, Education, & Trainings Free access to a virtual doctor and the employee assistance program Social activities for all employees (BBQ, Golf, Christmas parties, etc.) Generous referral bonuses and advantageous recognition programs A motivating work environment and a human management style where you can make a difference Summary: The Assembler read drawings and models to complete assembling and disassembling of nose and main landing gear components for the Boeing 777 program and other military programs. Main responsibilities: Perform acceptance test procedures (ATP) on various hydraulic components (shock struts and actuators) Rubber stamp (serialization) to be performed when specified on parts prior to final shipping. Assembling and dissembling nose and main landing gear components for the Boeing 777 program and other military programs Read drawings and models to complete the final assembly for shock struts, actuators and drag struts according to the process plans. Identifying proper and improper fits, alignments, and condition of components Seal bushings and pain sealant on all parts prior to honing Identify opportunities for process improvements and create a process change request. Maintains lot traceability throughout process. 5-S/Housekeeping responsibilities Adheres to all company policies and procedures, including Health & Safety Requirements Other duties as assigned/required by schedule and workload. Our ideal candidate: High school diploma or equivalent AME/A&P license and or aerospace experience is preferred. At least 2 years' experience assembling aerospace components. Work culture and environment: Are you known as an innovation driver? Are you looking for your next challenge and opportunity to learn & excel in Aerospace? Héroux-Devtek offers you the opportunity to work in a diverse and team-oriented environment where skills development is a top priority. Here, employees are at the heart of the realization of the product, developed through engineering centers, factories, a service unit, and an accessible and agile head office for fast decision-making. Be part of a motivating top-notch team taking Aerospace to new heights! Candidates must meet security screening requirements as set out by ITAR directives. HDI Landing Gear is an equal employment opportunity (EEO) employer to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, HDI Landing Gear will provide reasonable accommodations for qualified individuals with disabilities.
$27k-34k yearly est. 14d ago
Assembler
Select Source International 4.3
Clearwater, FL jobs
Job Description You will be responsible for assembling and testing various components and systems, playing a critical role in ensuring product quality and functionality. Shift & Pay Shift: 2nd Shift Pay Rate: $22.50/hour Open Positions: 3 Subcontractor Bonus Program (Up to $3,000) $1,000 after 14 days with perfect attendance $1,000 after 60 days $1,000 after 90 days Requirements: Assemble systems according to specifications Inspect and troubleshoot products to identify and resolve issues Follow standard operating procedures and safety guidelines Maintain accurate records of assembly and delivery defects Collaborate with cross-functional teams to improve processes and product quality Strong attention to detail and manual dexterity Ability to read and interpret technical drawings and specifications Good communication and teamwork skills High school diploma or GED required; Associate's degree preferred Manufacturing experience preferred Familiarity with Lean Manufacturing principles is a plus Company DescriptionSelect Source International (SSI) is a distinguished staffing company with nearly 25 years of experience, renowned for delivering top-tier workforce solutions encompassing staffing, recruiting, and managed services. As a proud supplier, we bring a wealth of expertise and best-in-business differentiators to comprehensively support your diverse workforce needs. Based in Minneapolis, Minnesota, USA, SSI has established itself as a global leader, serving a broad clientele across industries with unwavering dedication and excellence. SSI is ISO 9001, 14001, and Soc2 Type2 certified, underscoring our commitment to quality and security. We have garnered numerous sustainability and supplier diversity awards, further validating our industry-leading capabilities Company DescriptionSelect Source International (SSI) is a distinguished staffing company with nearly 25 years of experience, renowned for delivering top-tier workforce solutions encompassing staffing, recruiting, and managed services. As a proud supplier, we bring a wealth of expertise and best-in-business differentiators to comprehensively support your diverse workforce needs.\r \r Based in Minneapolis, Minnesota, USA, SSI has established itself as a global leader, serving a broad clientele across industries with unwavering dedication and excellence. SSI is ISO 9001, 14001, and Soc2 Type2 certified, underscoring our commitment to quality and security. We have garnered numerous sustainability and supplier diversity awards, further validating our industry-leading capabilities
$22.5 hourly 3d ago
R17 Assembly/Wire
General Dynamics Mission Systems 4.9
Pittsfield, MA jobs
Basic Qualifications General Dynamics Mission Systems (GDMS), a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to our customers. Key Responsibilities DUTIES AND RESPONSIBILITIES: (Include the following, but are not limited to) •Computer skills: Ability to operate various computer programs related to their position for time recording, access to shop planning and business instructions. •Read, interpret and work to; drawings, schematics, wiring lists and diagrams, work instructions, sketches, travelers, planning and verbal directions. •Perform related duties as required and have the ability to perform all duties of R-16 Job Classification. •Set up and maintain work station and related materials, includes set up of solder and cleaning stations, control of age controlled items and hazardous materials and consumables. •Perform material identification and paint touch up. •May give work direction/training to other employees as assigned. •May perform verification of other employees work. •Must be able to obtain other certificates, licenses and registrations required for their positions as defined in the qualifications below. •Maintain the work area and perform duties in a safe manner. SUPERVISORY RESPONSIBILITY: This job has no supervisory responsibilities. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills and/or ability required. Education and/or Experience: High school diploma or general education degree (GED) required. Related experience and or training are desirable. Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute rate, ratios, percent and interpret graphs. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively with other employees of the organization. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. Ability to question instructions when they are unclear. Certificates, Licenses, Registrations •Fork Truck Certification. •ESD Handling Certification. •Work Saver Usage Training. •Crane Operator Training. •Hazardous Material Handling and Shipping Training. •Security Clearance when required. •Solder and wire certification including visual acuity and color perception tests. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is required to stand; walk; and stoop, kneel, crouch, or crawl; and climb stairs and / or to use hands to finger, handle and feel; reach with hands and arms; climb and balance; and talk and hear for 8 hours a day. The employee must be able to lift and/or move up to 10 Responsibilities for this Position Job Requirements Education and/or Experience High school diploma or general education degree (GED) required. Related experience and or training are desirable. Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $27.03 - USD $27.03 /Hr. Company Overview At General Dynamics Mission Systems, we rise to the challenge each day to ensure the safety of those that lead, serve, and protect the world we live in. We do this by making the world's most advanced defense platforms even smarter. Our engineers redefine what's possible and our manufacturing team brings it to life, building the brains behind the brawn on submarines, ships, combat vehicles, aircraft, satellites, and other advanced systems. We pride ourselves in being a great place to work with this shared sense of purpose, committed to a diverse and exciting employee experience that drives innovation and creates a community where all feel welcome and a part of something amazing. We offer highly competitive benefits and a flexible work environment where contributions are recognized and rewarded. To see more about our benefits, visit ************************************************************* Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans
$27 hourly Auto-Apply 60d+ ago
Assembler, 1st Shift
Butler America Aerospace 4.0
Windsor, CT jobs
Job Description Assembler Pay Range: $23-25 1st Shift: MON - FRI 6:30am to 3:00pm 2nd Shift: MON - FRI 3:00pm to 11:30pm The Company - Work with an American owned International Manufacturer started over 150 years ago who is the World Leader in its industry. SUMMARY: The main function of an assembler is work as part of a team having responsibility for assembling an entire product or component of a product. JOB RESPONSIBILITIES: * Rotate through all the tasks required in a particular production process. * Determine work assignments and procedures. * Shovel and sweep work areas. * Provide assistance in the production of Wiring Assemblies. SKILLS: * Needed 5 yrs of Assembly experience doing: electromechanical assembly, electrical assembly or mechanical assembly, wiring assembly or general assembly. * Verbal and written communication skills, analytical and problem solving ability. * Team player and detail oriented. * Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. * Knowledge of relevant equipment, policies, procedures, and strategies to promote effective local, state, or national security operations for the protection of people, data, property, and institutions. EDUCATION / EXPERIENCE: * High school diploma or GED required. * Required - 5 years experience in assembly, manufacturing or production OTHER REQUIREMENTS: * Open to US Citizens and US Permanent Residents * Pass a criminal background check & drug test * Be at work on time every day scheduled * Work Overtime as needed Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at #ZR
$23-25 hourly 3d ago
SMT Assembler
North Atlantic Industries 4.1
Bohemia, NY jobs
Full-time Description North Atlantic Industries is a leading provider of embedded electronic solutions, specializing in rugged embedded computing, power supplies and motion simulation and measurement technologies. Our products and services are used by the military, aerospace, and industrial markets, helping to advance technology and protect the free world. NAI was proud to be recognized as a Top Workplace on Long Island by Newsday! Our culture is very collaborative. We have team building events, company picnics, special event day and employee game room. Please visit our website at ******************** to see more about what makes us a unique place to work. Summary: Production Operator II is responsible for working with computers to process daily production. Production Operator II must be able to follow instructions and pay attention to detail. Creating and maintaining a clean work environment is crucial to the overall quality of our products. Production Operators are required to have flexibility to train and move between functional areas. Production Operator II will be required to do both bench work and machine operations. Production Operators will be required to work in a team environment. Punctuality and communication are crucial for the success of the team. Requirements Set up and label SMT products Component preparation, masking and using different types of adhesives. Mechanical assembly Through hole and SMT hand soldering and rework. Interpret IPC-A-610 standards for acceptability and customer specifications. (Certified training will be provided) Candidates must be a U.S. Person, defined as either a U.S. citizen or a lawful permanent resident (Green Card holder), and must be able to provide appropriate documentation upon hire to verify this status. Please note that some positions involve sensitive customer contracts and require U.S. citizenship as a condition of employment. Qualifications and Education Requirements: High School Diploma or equivalent. Language Skills: The individual in this position must be fluent in writing, speaking, and understanding English. Must have good oral and written communication skills. Other Skills and Abilities: Must be computer literate. Experience working in production and PCB Assembly. Familiarity with assembly tools and Through hole and Surface mount Technology would be a plus. Familiarity with Surface-Mount Technology (SMT) electronic components and assembly process a plus Familiarity with using hand tools, screwdrivers, pliers, cutters, etc. Conscientious regarding quality, time management, teamwork, and safety. Flexibility to train and move between functional areas. North Atlantic Industries offers comprehensive and competitive packages including: Benefits Medical, Dental, and Vision Insurance Company-provided Life and AD&D Insurance Voluntary Supplemental Life Insurance Long-term Disability Insurance Flexible Spending Accounts (FSA) Employee Assistance Program (EAP) 401(K) with company matching contributions Vacation, holidays, sick Employee tuition reimbursement Annual bonus eligibility Opportunities for learning and career development Work Schedule and Environment Monday to Friday, Day Shift Discretionary 9/80 Schedule Business casual dress code North Atlantic Industries (NAI) is proud to be an Equal Opportunity Employer and is committed to providing equal employment opportunity for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to any legally protected status. If you are an individual with a disability or a disabled veteran and require a reasonable accommodation in applying for any posted position, please contact Human Resources at ************ or by email at ***********. As a federal government contractor, in accordance with applicable laws, regulations, and Executive Orders, North Atlantic Industries (NAI) is required to develop annual Affirmative Action Plans for Protected Veterans and Individuals with Disabilities. Any employees or applicants who wish to review the Affirmative Action Plan for Protected Veterans and Individuals with Disabilities can contact us by sending an email to *********** or by calling ************. Salary Description $22-$26 per hour
$22-26 hourly 5d ago
SMT Assembler
North Atlantic Industries, Inc. 4.1
Bohemia, NY jobs
North Atlantic Industries is a leading provider of embedded electronic solutions, specializing in rugged embedded computing, power supplies and motion simulation and measurement technologies. Our products and services are used by the military, aerospace, and industrial markets, helping to advance technology and protect the free world. NAI was proud to be recognized as a Top Workplace on Long Island by Newsday! Our culture is very collaborative. We have team building events, company picnics, special event day and employee game room. Please visit our website at ******************** to see more about what makes us a unique place to work. Summary: Production Operator II is responsible for working with computers to process daily production. Production Operator II must be able to follow instructions and pay attention to detail. Creating and maintaining a clean work environment is crucial to the overall quality of our products. Production Operators are required to have flexibility to train and move between functional areas. Production Operator II will be required to do both bench work and machine operations. Production Operators will be required to work in a team environment. Punctuality and communication are crucial for the success of the team. Requirements * Set up and label SMT products * Component preparation, masking and using different types of adhesives. * Mechanical assembly * Through hole and SMT hand soldering and rework. * Interpret IPC-A-610 standards for acceptability and customer specifications. (Certified training will be provided) * Candidates must be a U.S. Person, defined as either a U.S. citizen or a lawful permanent resident (Green Card holder), and must be able to provide appropriate documentation upon hire to verify this status. Please note that some positions involve sensitive customer contracts and require U.S. citizenship as a condition of employment. Qualifications and Education Requirements: * High School Diploma or equivalent. Language Skills: * The individual in this position must be fluent in writing, speaking, and understanding English. * Must have good oral and written communication skills. Other Skills and Abilities: * Must be computer literate. * Experience working in production and PCB Assembly. * Familiarity with assembly tools and Through hole and Surface mount Technology would be a plus. * Familiarity with Surface-Mount Technology (SMT) electronic components and assembly process a plus * Familiarity with using hand tools, screwdrivers, pliers, cutters, etc. * Conscientious regarding quality, time management, teamwork, and safety. * Flexibility to train and move between functional areas. North Atlantic Industries offers comprehensive and competitive packages including: Benefits * Medical, Dental, and Vision Insurance * Company-provided Life and AD&D Insurance * Voluntary Supplemental Life Insurance * Long-term Disability Insurance * Flexible Spending Accounts (FSA) * Employee Assistance Program (EAP) * 401(K) with company matching contributions * Vacation, holidays, sick * Employee tuition reimbursement * Annual bonus eligibility * Opportunities for learning and career development Work Schedule and Environment * Monday to Friday, Day Shift * Discretionary 9/80 Schedule * Business casual dress code North Atlantic Industries (NAI) is proud to be an Equal Opportunity Employer and is committed to providing equal employment opportunity for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to any legally protected status. If you are an individual with a disability or a disabled veteran and require a reasonable accommodation in applying for any posted position, please contact Human Resources at ************ or by email at ***********. As a federal government contractor, in accordance with applicable laws, regulations, and Executive Orders, North Atlantic Industries (NAI) is required to develop annual Affirmative Action Plans for Protected Veterans and Individuals with Disabilities. Any employees or applicants who wish to review the Affirmative Action Plan for Protected Veterans and Individuals with Disabilities can contact us by sending an email to *********** or by calling ************. Salary Description $22-$26 per hour
$22-26 hourly 5d ago
Assembler
Micro Tech Staffing-Rhode Island/Dartmouth 4.4
Pawtucket, RI jobs
Job Description Assemblers Needed ALL SHIFTS 1st shift 7 AM to 3:00 PM $17.75/hr 2nd shift 3 PM to 11 PM $19.53/hr 3rd shift 11 PM to 7 PM $20.41/hr We are seeking a dedicated and skilled Assemblers to join our dynamic team in a fast-paced manufacturing facility. The ideal candidate will have strong assembly skills working with hand tools. Duties Assemble various medical components according to spec sheets and or verbal instructions. Good hand eye coordination and hand dexterity Must HAVE basic understanding of computers ability to work off a computer when needed Utilize hand tools effectively to complete assembly tasks. Maintain a clean and organized work area to promote safety and efficiency. Conduct visual quality checks on assembled products to ensure they meet company standards. Report any issues or discrepancies in the assembly process to supervisors promptly. MUST SPEAK, READ, WRITE AND ABLE TO COMPREHEND IN ENGLISH training and work is in English both verbally, written and computer. Qualifications Previous experience in a factory or manufacturing environment is preferred. Proficiency in using hand tools and power tools safely and effectively. Experience working on an assembly line is advantageous. Strong attention to detail and commitment to quality workmanship. Ability to work well in a team-oriented environment while also being self-motivated. Flexibility to adapt to changing priorities in a fast-paced setting. Join our team as an Assembler, where your skills will contribute significantly to our production success! #RI Company DescriptionMicro Tech Staffing Group is one of the top technical staffing firms on the Eastern Seaboard. Since 1985 we have taken great pride in providing quality staffing services to businesses in the fields of Information Technology, Engineering, Manufacturing, Life Sciences, and Finance & Administration. With offices in Massachusetts, New Hampshire, Rhode Island, Connecticut, Maine, Virginia, North Carolina and Georgia, Micro Tech places an average of 2,000 highly-skilled employees daily.Company DescriptionMicro Tech Staffing Group is one of the top technical staffing firms on the Eastern Seaboard. Since 1985 we have taken great pride in providing quality staffing services to businesses in the fields of Information Technology, Engineering, Manufacturing, Life Sciences, and Finance & Administration. With offices in Massachusetts, New Hampshire, Rhode Island, Connecticut, Maine, Virginia, North Carolina and Georgia, Micro Tech places an average of 2,000 highly-skilled employees daily.
$17.8-20.4 hourly 3d ago
Assembler
Select Source International 4.3
Acton, MA jobs
Job Description 1st shift - 7am-3:30pm with overtime Assembles, tests, and calibrates mechanical components and products according to specifications. Ensures quality standards are met while following established procedures and maintaining a safe, organized work environment. Responsibilities: Assemble fabricated parts using hand and power tools. Test and calibrate units to meet tolerances and product specifications. Identify defective units and perform necessary repairs. Inspect products for quality control compliance. Maintain a clean and organized work area to ensure safety and efficiency. Follow all operational and safety procedures. Record and document production data accurately. Perform physically demanding tasks, including lifting and repetitive work. Company DescriptionSelect Source International (SSI) is a distinguished staffing company with nearly 25 years of experience, renowned for delivering top-tier workforce solutions encompassing staffing, recruiting, and managed services. As a proud supplier, we bring a wealth of expertise and best-in-business differentiators to comprehensively support your diverse workforce needs. Based in Minneapolis, Minnesota, USA, SSI has established itself as a global leader, serving a broad clientele across industries with unwavering dedication and excellence. SSI is ISO 9001, 14001, and Soc2 Type2 certified, underscoring our commitment to quality and security. We have garnered numerous sustainability and supplier diversity awards, further validating our industry-leading capabilities Company DescriptionSelect Source International (SSI) is a distinguished staffing company with nearly 25 years of experience, renowned for delivering top-tier workforce solutions encompassing staffing, recruiting, and managed services. As a proud supplier, we bring a wealth of expertise and best-in-business differentiators to comprehensively support your diverse workforce needs.\r \r Based in Minneapolis, Minnesota, USA, SSI has established itself as a global leader, serving a broad clientele across industries with unwavering dedication and excellence. SSI is ISO 9001, 14001, and Soc2 Type2 certified, underscoring our commitment to quality and security. We have garnered numerous sustainability and supplier diversity awards, further validating our industry-leading capabilities
$29k-37k yearly est. 2d ago
PC Assembler/Solder
Frequency Electronics 4.3
Uniondale, NY jobs
Hi- Rel Solder Hi-Rel Solder Assembler to join our manufacturing team. The successful candidate must have 2-3 year's experience. Perform precision hand soldering of surface-mount and through-hole components to IPC Class 3 standards. Responsible for assembling and soldering high-reliability printed circuit boards (PCBs) and sub assemblies in accordance with industry standards such as IPC J-STD-001, IPC-A-610. The candidate should have working knowledge of Operating soldering equipment, microscopes, and other assembly tools. Must be able to read and interpret assembly documents and engineering drawings. Education and Required Skills - High School diploma or equivalent and 2+ years in PCB or electronics assembly, preferably in a Hi-Rel or relative environment. - Proficiency in soldering to IPC J-STD- A-610 Class 3 standards. - Certification in IPC J-ATD-001 and/or IPC-A-610. - Experience in working under a microscope and magnification and with fine-pitch components. - Familiarity with ESD protection procedures. - Ability to read and understand technical documents and drawings. - Excellent attention to detail and manual dexterity. Strong computer and written skills is a PLUS, willing to train an enthusiastic applicant willing to learn a new skill. We offer a comprehensive benefit package including: Health Insurance, Dental Insurance, Vision, Life Insurance, Short Term Disability, Long Term Disability, Flexible Spending Option and 401K. We also offer Paid Time Off including: Vacation, Sick and Paid Holidays.
$25k-34k yearly est. Auto-Apply 60d+ ago
Assembler 1
Softhq 3.7
Lincolnshire, IL jobs
Candidates are welcome to apply for the Assemblers position in Lincolnshire,IL, with a Fortune 100 Company...Temp to Hire Positions. Job Description Start Date: ASAP *** Pay rate: $13.00/hr *** Shift: 6:30 AM - 3:00 PM. *** This position will consist of light duty assembly, use of hand tools, and mechanical assembly. It is preferred that candidates have ability to read blueprints, mechanical assembly experience, and ability to follow directions. In this position candidates will be cross-trained in a couple of different areas (commercial or industrial with same job requirements) *** PPE: Candidates must provide their own safety shoes - Company will supply safety glasses and gloves. *** High school diploma or GED required *** MGR will interview on site. *** Must have reliable transportation to site. *** Person can start as soon as on boarding clears Assembles fabricated parts at floor stations. Tests and calibrates parts and mechanisms to meet tolerances and product specifications. Uses hand tools and power tools to assemble units according to product specifications. Identifies units that fail tests or tolerance levels and repairs as necessary. Requires a high school diploma or its equivalent. May be required to complete an apprenticeship and/or formal training in area of specialty. May require 0-2 years of experience in the field or in a related area. Typically reports to a supervisor or manager. Special Considerations: Lifting is generally at or below 30Lbs. without significant repetitions. Qualifications Looking for a Mechanical Assembler, who knows how to work with Blue prints. High School Diploma Required Additional Information All your information will be kept confidential according to EEO guidelines.
$13 hourly 60d+ ago
Wiring Assembler - Systems
Aerotech 4.3
Pittsburgh, PA jobs
Wiring Assembler - Systems - Up to a $3,000 Sign-On Bonus! Looking for meaningful work where you can make a difference in global innovation? Engineer a better future with Aerotech, a global leader in precision motion and automation. Our customers create some of the most innovative products on the planet, from life-saving medical devices to tools for deep space exploration. Our precision motion and automation systems make it all possible. Build a lasting, satisfying career at Aerotech, where we foster growth, empower employees and promote from within. You'll find unparalleled opportunities and a company that values your voice. We also provide an extensive total rewards compensation system, including: Bonus payments every 6 months Rich health plans Retirement planning with our 100% company-paid Employee Stock Ownership Trust If you're mechanically inclined or technically savvy with a passion for cutting-edge technology, we want to hear from you. What will your day look like? At Aerotech, you will: Assembles cables and cable harnesses using hand tools, power tools, and soldering Reads wiring and assembly drawings Routes and attaches wires and connectors to electronic circuitry and/or subassemblies Utilizes test equipment to test for conformance Wires system level motors and stages Wire multi-axis assemblies What will separate you from the rest? Experience with: Excellent soldering skills, preference to have familiarity with IPC-620 soldering standards Ability to read and interpret wiring assembly drawings Experience with hand tools and crimpers Effective computer literacy, including experience with ERP Software Problem solving skills Minimum Qualifications: High school diploma or GED One to five years of related experience Vocational or technical school training is preferred, but not required Equivalent combination of education and experience may be considered Benefits: Aerotech has been advancing industries with our precision motion technology for more than 50 years. Our employees are our future, and we continue to grow by investing in our employees through continuous paid on-the-job training in a clean and climate-controlled environment, while providing the following exceptional benefits and more! Competitive compensation Bi-annual bonus Annual raise eligibility UPMC Health Insurance Dental insurance Vision insurance Life insurance Retirement Plan Employee Stock Ownership Trust 401k Paid time off Parental leave Referral program Professional development assistance Tuition reimbursement Must be authorized to work in the US currently and in the future without employer sponsorship. Aerotech is committed to the concept and practice of equal employment opportunity and affirmative action. The Company's policy is to provide equal employment opportunity to all qualified applicants and employees regardless of their race, color, religion, age (40 or over), sex, national origin, disability, or veteran status. This policy applies to recruiting and hiring, training, promotion, compensation, benefits, transfer, layoff, and termination. The Company makes and will continue to make all employment decisions in a non-discriminatory manner. The Company is collecting the information requested in this employment application for purposes of evaluating your suitability for hire by the Company. The Company will share the information that you provide in this employment application only with Company management officials who are involved in the hiring process or who are otherwise involved in making employment-related decisions on behalf of the Company.
$28k-36k yearly est. Auto-Apply 13d ago
Assembly B (FOS)
L3Harris 4.4
Assembler job at L3Harris
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Manufacturing Assembly B Job Code: 31682 Job Location: Cincinnati, OH Job Schedule: 4/10 M-Th Job Description: Responsible for performing a wide variety of electronic or electro-mechanical assembly operations which may include skilled hand work or utilizing automated production equipment. Comprehends and interprets a variety of technical specifications, terms and documents. Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering and cable harnessing on assembly units. Makes setups and adjustments holding tolerances to blueprint specifications. Essential Functions: Ability to read and understand description of manufacture (DM, DOM) for operation assembly instruction. Ability to handle small parts with tweezers and/ or special tools Operate various types of assembly equipment (assembly machines, press stakes, air screw drivers, etc.) with proper training. Visually inspect components and subassemblies for obvious defects prior to, during, and after assembled. Check completed assemblies for conformance with quality standards and DMs. Maintain assembly/ quality records paperwork as required. Qualifications: + Requires a High School Diploma or equivalent and a minimum of 4 years of prior relevant experience or 2 years post-Secondary/Associates Degree with 0 to 2 years of prior related experience. + J-STD-001 experience. + Manufacturing experience. + Must be able to obtain a US Security Clearance. Preferred Additional Skills: + Experience reading blueprints. + Experience using magnification instruments. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English (******************************************************************************************** or Spanish (******************************************************************************************** . For information regarding your Right To Work, please click here for English (****************************************************************************************** or Spanish (******************************************************************************************** .
$33k-42k yearly est. 56d ago