Mechanic jobs at Harsco

Specific Responsibilities Mechanic II performs a variety of duties that may require a degree of skill and ability in the repair, modification and maintenance of machinery and related mechanical equipment. He/she may assist senior level mechanics in dismantling and assembling equipment/machines; repairing and replacing parts. * Responsible for Daily Operation and Maintenance of compressors, glycol dehydration unit, B-Tex unit, incinerator, slop tanks, sumps, transfer pumps, "control air" air compressors and all equipment associated with compressor facility. * Perform Daily checks, but not limited too; * Glycol PH and adjust accordingly. * Glycol pumps flow rate and pressures. * Temperatures on compressor valves, pressure readings and flow rates. * Check for proper operation of all sumps and dump valves. * Check all fluid levels and operation of lubricators. * Check air compressors, filters, oil levels, belts, pressures and bleed lines. * Check for leaks, loose bolts, vibration or unusual noises by making visual inspection at least three times per day on all equipment. * Accurately record all above information and any performed maintenance. * Become certified on CO2 line, DIG TESS, location, Right of Way, signage, valve operation etc. * Attend all DIG TESS notifications, reply accordingly and record. * Perform oil changes on all equipment in a timely manor and record. * Make notifications when problems are suspected. * Order, stock and label spare equipment needed to keep facility in operation, in an orderly fashion. * Keep facility clean and neat * Operate in a Safe and environmentally sound manner. * Stay in contact with vendors for equipment, oils, chemicals and filters for updated revisions and recommendations. * Behavioral Characteristics * Team player willing to take active role in team responsibilities. * Excellent time management skills. * Ability to learn new skills. * Willingness to share knowledge with others. * Good written and oral communication skillS * Safety * Operate in a Safe and environmentally sound manner. Maintain Good driving record * Good knowledge of safe oil and gas operations and procedures in mature secondary and tertiary recovery fields. * Follow safe practices with regard to oil field electrical installations. * Supervision * Keep track of all contractors, venders and company people when inside of facility. Qualifications & Experience The successful candidate will have the following qualifications and experience: * High school diploma or equivalent * 3+ years of experience Competencies The successful candidate should demonstrate and exhibit the following core competencies: * Communication: Writes, speaks, and presents information effectively and persuasively across communication setting; * Results: Pursues work with energy, drive, and results orientation to positively impact Apache's business success; * Collaboration: Works in partnership with others and encourages different perspectives, while building and maintaining trust; and * Culture: Willingness and ability to align one's behavior with the needs, priorities, and goals of Apache. Company Overview Our primary product is energy, and where there is affordable, abundant energy, people are healthier, have access to better education, and are given greater opportunities to elevate their families to higher standards of living. Nearly 3 billion people - roughly one-third of the global population - live without electricity or without clean cooking facilities. We are committed to providing energy in innovative and more sustainable ways to help raise the standard of living for those living in energy poverty and to meet the ongoing demands of people and economies around the world. The products we deliver power increasingly cleaner electricity across the globe, fuel tractors and trucks, make fertilizer to keep the world's food supply on the table, and heat our schools, hospitals and businesses. Our employees bring a wide range of talents and skills to the job every day to tackle complex business challenges. We believe in providing a truly rewarding work environment supported by a benefits platform that ranks among the best in our peer group. Our company offers career development opportunities where employees can grow personally and professionally. We promote employee benefits that cultivate a family-friendly work environment and focus on our employees' overall well-being. We are committed to being a workplace where all employees are valued and can thrive with a sense of belonging. Our commitment to non-discriminatory, equal employment opportunities benefits our individual employees, our company and our external stakeholders; we are better as an organization when various experiences, ideas, and perspectives are brought to the table. Apache Corporation is a wholly owned subsidiary of APA Corporation (NASDAQ:APA). Apache has operations in the United States, Egypt's Western Desert and the United Kingdom's North Sea and a sister company with exploration opportunities offshore Suriname. Whether supporting Apache, APA Corporation or one of its subsidiaries, team members are employed by Apache Corporation. For additional information about APA Corporation, please visit: Portfolio Sustainability Investors *************** Apache Statement on Hiring To provide genuine equal opportunity to all people, it is the policy of Apache Corporation and its subsidiaries to base all employment-related decisions and actions exclusively on employment-related criteria. To provide genuine equal opportunity to all people, it is the policy of Apache Corporation and its subsidiaries to provide broad dissemination of job opportunities, as consistent with the nature of the positions. To provide genuine equal opportunity to all people, it is the policy of Apache Corporation and its subsidiaries to review its employment-related policies and actions on a regular basis to ensure that their application is consistent with their intent. Equal Employment Opportunity

A&P Mechanic Estimated Pay: Up to $1300.00/Week (After Taxes) or $41.00/hr Job Type: Full-time Schedule: Monday - Friday Aircraft: B737, B767, A320 or similar License: Airframe & Power Plant License - Required Experience Requirements Minimum 2+ years of experience in MRO environments (e.g., AAR Corp., Aviation Technical Services (ATS), Delta TechOps, Lufthansa Technik, StandardAero, ST Engineering) or with carriers such as Delta, Frontier, United, etc. Technical Skills Adhere to General Work Requirements Comply with Environmental / Health / Safety policies and procedures. Perform all work in a safe and timely manner Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft Perform and document work performed per appropriate manuals and regulations as required Operate ground support equipment as required Perform mechanical / electrical removals and installations Assist in providing time estimates Assist in performing complex repairs on aircraft systems Perform other duties as assigned Physical Requirements Able to lift up to 50 lbs Comfortable in physically demanding environments Tools Must supply personal tools Job Type: Temp-to-hire Benefits: Relocation assistance Experience: Wide-Body: 2 years (Required) License/Certification: Airframe & Powerplant License (Required) Work Location: In person

Job Description Estimated Pay: Up to $1300.00/Week (After Taxes) or $40.00/hr Job Type: Full-time Schedule: Monday - Friday Aircraft: B737, B767, A320 or similar License: Airframe & Power Plant License - Required Experience Requirements Minimum 2+ years of experience in MRO environments (e.g., AAR Corp., Aviation Technical Services (ATS), Delta TechOps, Lufthansa Technik, StandardAero, ST Engineering) or with carriers such as Delta, Frontier, United, etc. Technical Skills Adhere to General Work Requirements Comply with Environmental / Health / Safety policies and procedures. Perform all work in a safe and timely manner Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft Perform and document work performed per appropriate manuals and regulations as required Operate ground support equipment as required Perform mechanical / electrical removals and installations Assist in providing time estimates Assist in performing complex repairs on aircraft systems Perform other duties as assigned Physical Requirements Able to lift up to 50 lbs Comfortable in physically demanding environments Tools Must supply personal tools Powered by JazzHR ixyv0Q0RW3

Estimated Pay: Up to $1300.00/Week (After Taxes) or $40.00/hr Job Type: Full-time Schedule: Monday - Friday Aircraft: B737, B767, A320 or similar License: Airframe & Power Plant License - Required Experience Requirements Minimum 2+ years of experience in MRO environments (e.g., AAR Corp., Aviation Technical Services (ATS), Delta TechOps, Lufthansa Technik, StandardAero, ST Engineering) or with carriers such as Delta, Frontier, United, etc. Technical Skills Adhere to General Work Requirements Comply with Environmental / Health / Safety policies and procedures. Perform all work in a safe and timely manner Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft Perform and document work performed per appropriate manuals and regulations as required Operate ground support equipment as required Perform mechanical / electrical removals and installations Assist in providing time estimates Assist in performing complex repairs on aircraft systems Perform other duties as assigned Physical Requirements Able to lift up to 50 lbs Comfortable in physically demanding environments Tools Must supply personal tools

Rotating Machinery Services, Inc. is seeking qualified Rotating Equipment Mechanics to work 2nd shift that will perform a variety of mechanical operations / tasks on turbomachinery components and assemblies to ensure compliance with specifications and quality requirements. This position requires experience working on pumps, gearboxes, compressors, and Blowers. The requirements below are the minimum requirements an employee needs to fulfill this position. They are representative of the knowledge, skills and ability required for the position. JOB REQUIREMENTS AND QUALIFICATIONS Unit disassembly, cleaning, and inspection including the accurate collection and recording of technical inspection data for equipment repair proposals. Maintain, diagnose, and repair all types of rotating equipment. Complete required maintenance to return equipment back to customer operating condition, per OEM specifications. Prepare and complete service documentation. Maintaining clear and concise daily work records. Use of basic problem-solving skills in terms of gathering facts, analyzing the cause, and selecting the best most accurate solution. Maintenance of shop equipment and regular daily shop housekeeping to ensure an organized and safe working environment. Responsible for understanding and complying with the safety policy, procedures, and instructions. Disassemble complex rotating equipment and provide written observations of failure modes and condition of “as received” parts. Assist in cleaning and prepping parts for NDT and PMI examination. Perform and document detailed dimensional and runout inspection of all components. Provide written inspection report, to include recommended repairs, and replacement parts needed. Provide written instructions and drawings to other crafts involved in manufacture or repair of components. Perform quality checks on customer furnished, manufactured, and repaired components prior to final assembly. Clean and prep parts for final assembly. Assemble equipment complete per OEM, ASME, API, or customer supplied specification. Document all final sizes, clearances, and documentation to provide customer with a final repair report. Complete “as received” photo documentation and visual inspection of assemblies and customer furnished spare parts. Other projects and responsibilities may be added at the company's discretion. Knowledge and/or Skill Requirements: NCCER Millwright certification helpful. Must be a team player and be willing to train junior Mechanics. This position requires good attendance and punctuality. Communicate with supervision, crafts, and customers during the inspection and repair process. Good organization skills. Knowledge and use of all types of measuring devices ad rotating equipment. Supply basic mechanics tools and measuring devices required to complete work as assigned. Education: High School Diploma/GED from an accredited school. NCCER Millwright certification helpful. Mechanic certificate from a trade school, considered helpful. Previous Experience: 5 - 10 years of Mechanic experience working on pumps, gearboxes, blowers, compressors, and turbines. OTHER INFORMATION The position will be based full time in our Bethlehem, PA shop. This is a full-time position, with a minimum expectation of 40+ hours per week. Additional hours, including evenings or weekends maybe required based on business need. This position can be required to participate in the company random or customer specific drug and alcohol screening and background check. Able to understand, read, write, and speak English. Must possess a valid driver's license. Must be able to legally work in the US and provide proper documentation. Able to pass a pre-employment drug, alcohol test and background check. This position can be required to participate in the company random or customer specific drug and alcohol screening and background check. Ability and willingness to lift objects weighing up to 30 lbs., 50 lbs. with assistance. Ability to walk, climb, reach above head, and balance. RMS Inc. may have government contracts that impose specific requirements on employees working on those projects. If an employee does not meet these requirements, they may be reassigned to a different location or be ineligible to work on certain assignments. Physical Requirements: While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift. Ability and willingness to lift objects weighing up to 50lbs. with assistance, walk, climb, reach above head, and balance. Must be able to use hands for assembly and tool usage. Must not have allergies or issues related to handling metals including aluminum, copper, bronze, and steel. Work Environment: While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise and metal particles. WHAT WE OFFER Competitive Pay Paid Time Off Medical / Dental / Vision 401k Employee Incentive Programs Employee Reimbursement Programs Tool, Shoe, and Safety Glasses reimbursement Uniform Service Come Join Rotating Machinery Services Inc. and watch your Career go TURBO! ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise-all backed by responsiveness in competitive prices and lead times. RMS' commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Our skilled trades professionals use their hands-on technical and mechanical abilities to work on a variety of unique equipment to our industry. We are looking for motivated individuals who have the strong ability to troubleshoot, problem solve and the desire to make tomorrow better than today. PADNOS recognizes the demand for skilled trades so we are teaming with educators to develop partnerships and create hands-on programs for students and individuals. PADNOS is a full-service recycling company handling paper, plastic, metals and electronic recycling. We tailor recycling programs for consumer and industrial clients throughout the United States. PADNOS was founded over a century ago and continues to transform the recycling industry. The company has thrived as a family business through four generations and has grown to be a market leader and best in class innovator. PADNOS has a rich history of taking care of our Team Members, their families and the multiple communities we serve. We invest in our Team Members and offer the following benefits: Competitive Wage Medical, Dental and Vision Insurance 100% Tuition reimbursement for Team Members 75% Tuition Reimbursement for dependents First Time Home Buying Assistance 401K Match and Profit Sharing Performance Driven Bonuses Tractor/Trailer Mechanic Position Summary: The Mechanic will perform inspections and preventative maintenance on a variety of equipment such as semi-tractors, trailers, heavy equipment and machinery including brakes, suspensions, electrical, lighting and mechanical. Repair hydraulics, electrical and other mechanical components Troubleshoot and mechanical diagnosis to identify repair needs Prepare and complete required paperwork Tractor/Trailer Mechanic Position Qualifications: One plus year of related diesel mechanic or related military training Knowledge of welding and torching helpful, but not necessary Mathematical and mechanical aptitude Related experience and knowledge of the methods, materials tools and techniques used in repairing semi tractors & trailers Strong communication skills, effective communicator Proven ability to work alone or in a team setting Attention to accuracy and detail Demonstrated safety consciousness Relevant Military experience #IND123 Be a part of the green movement and join PADNOS today! PADNOS is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, weight, height, sex, sexual orientation, marital status, national origin, age, genetic medical information, protected veteran status, or disability status.

Lewis Energy is a privately-owned, exploration and production company. Unlike most E&P companies, we are vertically integrated. As a vertically integrated company, we have incorporated the latest technology which allows us to keep our costs down. Our innovation allows us to continue drilling during hard times when other companies are abandoning their operations. Lewis Energy Group is looking for a highly motivated Heavy Equipment Mechanic to join our Service Center team. The Heavy Equipment Mechanic will diagnose problems and performs complex and/or major mechanical, electrical, hydraulic, and pneumatic repairs on all yellow iron and other oil field equipment. Responsibilities * Heavy Equipment Maintenance: Performs all necessary preventative maintenance on heavy equipment according to established guidelines and time frames. Keeps accurate and detailed records of failures and repairs in Computerized Maintenance Management System. Identifies and orders parts necessary to complete repairs and routine maintenance. Performs complex repairs on equipment. Replaces parts and equipment as necessary. Assists lower level Mechanics in completing work assignments as necessary. * Troubleshooting: Troubleshoots and diagnoses all problems with yellow iron equipment. Completes troubleshooting repairs and/or modifications work on equipment. * Tool Maintenance: Performs daily inspections of tools and equipment used. Ensures cleanliness of hand tools, equipment and parts. Qualifications * High school diploma or general education degree (GED); minimum five years related experience or training; or equivalent combination of education and experience. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. * Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. * Bilingual in English and Spanish. Computer Skills To perform this job successfully, an individual should have basic knowledge of computer use and Microsoft Office Suite. Knowledge of CMMS software is a plus. Fleet Management Software is a plus. Certificates, Licenses, Registrations Valid Driver License. DOT License is a plus. Other Skills and Abilities Strong communication and time management skills. Ability to work under pressure. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is frequently required to stand and climb or balance. The employee is occasionally required to sit and taste or smell. The employee must occasionally lift and/or move up to 50 pounds. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts; high, precarious places and outside weather conditions. The employee is frequently exposed to extreme heat and vibration. The employee is occasionally exposed to fumes or airborne particles and risk of electrical shock. The noise level in the work environment is usually moderate. Top benefits As a team member at Lewis Energy Group, you'll enjoy: * Paid time off * Comprehensive benefits package, including health, vision and dental insurance * Career advancement and bonus opportunities Location Lewis Energy Group is located in Encinal, Texas and is situated along Interstate 35, approximately 40 miles north of Laredo.

WE ARE HIRING! Mechanic II- Frac At Lewis Energy Group, we are a vertically integrated exploration and production (E&P) company and a leading natural gas producer in South Texas and across the nation. With operations in South Texas, Colombia, and Mexico, we take pride in our long-standing commitment to excellence, innovation, and community engagement. What sets us apart is our family-oriented work culture, built over decades of dedication and teamwork. This culture drives the passion we bring to our work and the positive impact we strive to make in the communities where we operate. As an Mechanic II- Frac, you will diagnose and perform complex mechanical, electrical, hydraulic, and pneumatic repairs on company assets, including DOT and Completions Services equipment. Responsibilities What You'll Do: ️ Perform preventative maintenance and repairs on DOT and Completions Services equipment according to company standards and timelines️ Accurately document maintenance activities, failures, and repairs in the Computerized Maintenance Management System (CMMS)️ Identify, order, and replace parts and equipment as needed️ Troubleshoot and diagnose complex equipment issues️ Conduct routine tool and equipment inspections, ensuring cleanliness and functionality️ Support and assist lower-level Mechanics in completing repairs and maintenance tasks Qualifications About You (Qualifications & Experience) We are looking for dedicated individuals who bring expertise, problem-solving abilities, and a strong work ethic to our team. Ideal candidates will have: Education: High school diploma or GED required; technical/vocational certificate preferred Experience: Minimum of 3 years of related mechanical experience in equipment maintenance and repair Licenses: Valid Driver License required; DOT License preferred Technical Skills: Knowledge of Microsoft Office Suite and basic computer use Familiarity with RTA Fleet Management Software preferred Language Skills: Bilingual in English and Spanish preferred Additional Skills: Strong communication and time management skills Ability to work under pressure and solve complex problems Your Work Schedule & Hours Work shifts up to 12 hours Overtime as needed 10/5 Rotation Schedule (Ten days on, 5 days off) Hours may vary based on operational needs Your Benefits At Lewis Energy Group, we value the dedication and hard work of our employees. That's why we offer a comprehensive benefits package designed to support you and your family while keeping costs affordable. Insurance - Medical, Dental, Vision, Basic Life, AD&D, and additional benefit options tailored to your needs Retirement - 401K with a 4% company match Annual Bonus - Awarded at the discretion of the Compensation Committee Generous PTO & Paid Holidays Employee Assistance Program (EAP) - Free, confidential support for you and your dependents Career Progression Program - Opportunities for growth and development ️On-Site Fitness Center Wellness & Company Events throughout the year Lodging (dependent on role) Per Diem for drilling roles Join Lewis Energy Group and become part of a company that values hard work, innovation, and the well-being of its team members. Apply online at ******************* .

Lewis Energy is a privately-owned, exploration and production company. Unlike most E&P companies, we are vertically integrated. As a vertically integrated company, we have incorporated the latest technology which allows us to keep our costs down. Our innovation allows us to continue drilling during hard times when other companies are abandoning their operations. Lewis Energy Group is looking for a highly motivated Heavy Truck Mechanic to join our Service Center team. The Heavy Truck Mechanic will perform preventative maintenance and routine mechanical, electrical, hydraulic, and pneumatic repairs on company assets to include all DOT equipment. Responsibilities * Heavy Duty Maintenance: Performs preventative maintenance on all DOT equipment according to established guidelines and time frames. Keeps accurate and detailed records of failures and repairs in Computerized Maintenance Management System. Acts as an assistant to more senior Mechanics on larger jobs. * Troubleshooting: Troubleshoots and diagnoses routine problems or recurring malfunctions of company assets and chooses course of action. Consults with supervisor to ensure accuracy of diagnosis and approval for work. Completes troubleshooting repairs and/or modifications work on equipment. * Tool Maintenance: Performs daily inspections of tools and equipment used. Ensures cleanliness of hand tools, equipment and parts. Qualifications * High school diploma or general education degree (GED); minimum five years related experience or training; or equivalent combination of education and experience. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. * Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. * Bilingual in English and Spanish. Computer Skills To perform this job successfully, an individual should have basic knowledge of computer use and Microsoft Office Suite. Knowledge of CMMS software is a plus. Certificates, Licenses, Registrations Valid Driver License. DOT License is a plus. Other Skills and Abilities Strong communication and time management skills. Ability to work under pressure. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is frequently required to stand and climb or balance. The employee is occasionally required to sit and and/or smell. The employee must occasionally lift and/or move up to 50 pounds. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts; high, precarious places and outside weather conditions. The employee is frequently exposed to extreme heat and vibration. The employee is occasionally exposed to fumes or airborne particles and risk of electrical shock. The noise level in the work environment is usually moderate. Top benefits As a team member at Lewis Energy Group, you'll enjoy: * Paid time off * Comprehensive benefits package, including health, vision and dental insurance * Career advancement and bonus opportunities Location Lewis Energy Group is located in Encinal, Texas and is situated along Interstate 35, approximately 40 miles north of Laredo.

Roles and Responsibilities: Perform diagnostic, troubleshooting and repair tasks on vehicles, equipment and trailers Completion of preventative maintenance tasks including oil changes, brake jobs, etc. Troubleshooting and repair of electrical issues especially wiring harnesses and lighting Coordinating with the Shop Foreman to prioritize and expedite repairs Document repair and maintenance work on vehicles, trailers and equipment in accordance with company processes Ensure DOT compliance on all fleet items Entering data into fleet computer system for tracking and vehicle profiles Operate all company vehicles and equipment in a safe manner Communicate effectively an professionally with all company and vendor personnel Maintain general shop safety and cleanliness standards Success Factors: Able to disassemble engines and evaluate for efficient and cost-effective repairs Familiar with DOT requirements and inspection processes Able to complete paperwork accurately and legibly for required tracking of all maintenance and repair activities per company policies Good computer skills (parts ordering, email, internet navigation) Must provide own tools Ability to stand, walk, stoop, kneel and bend constantly throughout the day Ability to work with hand tools and power tools in both strength and fine manipulation scenarios Ability to lift 0-20 lbs. constantly, 21-50 lbs. frequently, and 50-75 lbs. occasionally Must be able to work indoors and out in all types of weather as needed Experience and Education: 2 years of experience in fleet and construction equipment diagnosis, troubleshooting and repair of both gasoline and diesel engines Experienced with electrical, hydraulic and suspension systems Additional Requirements/Licenses/Certifications: Possession of, or ability to obtain, a valid State of Residence Driver's License is required within two weeks of employment. Candidates must pass criminal and Motor Vehicle Record (MVR) background checks and pass a pre-employment drug screen. Notes: The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer.

TSC's Airborne Intelligence, Surveillance and Reconnaissance (AISR) Division is actively recruiting an expert Aviation Maintenance Technician to join our team in support of Flight & Ground Operations of a developmental aircraft. The ideal candidate will have a strong background in aviation mechanics, in both manned and unmanned aircraft systems, possess an acute attention to detail, as well as exceptional troubleshooting/problem solving skills to support the aircraft from development through operational phases. As part of the team, you will be responsible for conducting maintenance, inspections, and repairs on manned and unmanned aircraft systems and components, ensuring that all aircraft are mission-ready and meet applicable legal, contractual and safety performance standards. Ground & Flight Operations will be conducted at various test sites, with the primary location being located at Fort Huachuca, AZ (Sierra Vista). This position will formally report to the Test & Training Site Lead but will be responsible to multiple stakeholders within/outside of the division. This position will be responsible for developing and managing aviation Ground & Flight Operation Procedures, including the development of maintenance manuals, formal training programs, technology insertion. As an integral member of the Aviation Operations leadership team, other duties may be assigned. Key Responsibilities: Perform routine and preventive maintenance on manned and unmanned aircraft, including airframes, engines, avionics, line-replaceable-units (LRU) and other system components. Troubleshoot, repair, and replace defective or malfunctioning parts and systems. Support the development and testing phases of new technologies and configurations. Conduct inspections of aircraft systems in compliance with regulatory requirements and company safety standards. Assist in the assembly and disassembly of aircraft for flight tests, demonstrations, and operational missions. Maintain accurate maintenance logs and documentation for all aircraft. Collaborate with the engineering team to address technical issues and implement solutions during all phases of the aircraft lifecycle. Ensure all tools and equipment used are in proper working condition and comply with safety standards. Support operational personnel during pre-flight and post-flight procedures as required. Responsible for safe and effective daily operations of aircraft maintenance and flight line operations. Ensure compliance with; flight & ground procedures, training procedures, and standardization & evaluation procedures. Ensure worksite safety, and completion of digital and paper logbooks, maintenance records, FOD and tool control, Technical Orders, part accounting. Assures timely, accurate records are maintained. Execute work calendars, support Internal Audits and participate in performance reviews. Assist in preparing technical reports and briefings for the ADO and engineering/production team. Maintain access to and requirements for COMSEC access. Assists in the tracking of consumables, recording MX failures. Monitors the use of parts and tools and maintains inventories/logs. Required Knowledge: Through understanding of all physical aspects of airframe, powerplant, electrical systems, mechanical systems, RF systems, troubleshooting, personnel leadership. Past history of FAA Flight and Maintenance standards, airworthiness, and safety. Maintenance Technical Inspector Experience in an operational capacity of aviation mechanics. Adherence to DCMA procedures and reporting maintenance in logbooks. Use of maintenance manuals, Technical orders, Compliance Procedures. FOD control program adherence, execution. Required Skills: Exceptional knowledge of aviation flight line procedures and Maintenance Operations. Strong attention to detail and analytical skills. Excellent organization and planning skills, and excellent verbal and written communication. Ability to work independently in a fast-paced environment and get along with others. Ability to review, interpret, and apply industry standards (FAA/IACO) and ensure compliance to contract terms and requirements. Knowledge and experience with Air Vehicle Systems and subsystems, and Technical Manuals (General Systems, Job Guides, Work Instructions, Fault Isolation, etc.). Maintain Aircraft System maintenance logs and configuration with Logistician. Ability to obtain Crew Chief Instructor designation after 6 months of employment. Computer Skills Highly Proficient in Microsoft office suite. Able to create documents, spreadsheets, presentation materials quickly and efficiently. Experience with technical writing, preparation of reports in Adobe. Type >30 words per minute. Digital computer logging of Aviation Maintenance procedures - familiarity with commercial/military requirements for logging and maintaining aircraft. Understanding MS Windows computer functions and ability to teach others how to navigate digital maintenance resources. Required Qualifications: FAA Airframe and Powerplant (A&P) certification and 7 years' of experience in aviation maintenance operations. Minimum of 3 years group 3-5 UAS maintenance operations experience. Strong knowledge of aircraft systems, including engines, avionics, flight controls, and airframes. Strong mechanical and electrical troubleshooting skills. Prior leadership experience in an aviation maintenance role. Knowledge and experience with Aircraft Technical Manuals (General Systems, Job Guides, Fault Isolation, etc.). Experience installing and maintaining electrical systems. Ability to troubleshoot electrical issues, read electrical diagrams, schematics, and understand the theory of operation. Experience with developmental or experimental aircraft is a plus. Experience with Electrostatic Discharge (ESD) precautions and electrical safety measures. Experience using multimeter, oscilloscope, and like equipment to test electrical systems. Ability to perform line and site level maintenance and repairs. Ability to maintain aircraft maintenance logs and configuration. Excellent organization skills. Excellent written & verbal communication skills. Active SECRET security clearance. FAA Class 3 Medical. Willingness to travel as needed for field operations and support. Work Experience in aviation field in OCONUS (deployed) location preferred. Clean Background Check. Physical Work environment: The position will require working in austere locations with limited access to selective food, shelter provided at worksite. Ability to work outside for 12 hr. shifts in >100 deg F weather. Ability to lift and carry equipment and tools (up to 50 lbs). Ability to work in various weather conditions, including extreme heat and cold. Ability to work at heights or in confined spaces as needed. Must have good vision (corrective lenses acceptable) and hearing, as required for safety in aircraft maintenance. While performing work duties, the employee is regularly required to walk, sit and stand and reach with hands and arms. This position requires close vision, distance vision, color vision, depth perception and ability to adjust focus. Safety Equipment: Ability to use PPE for mechanical, audible, and chemical hazards Medical Requirements: A FAA class 3 flight physical is required annually. In addition to being found fit for the specific deployment by a medical and dental evaluation prior to deployment, there is also the requirement to comply with additional medical restrictions IAW MOD 15. MOD 15 is a set of physical and psychological standards put forward by the United States Central Command, and applies to all U.S. uniformed service members, government civilian employees, U.S. Department of Defense (DoD) contractor employees, and volunteers deploying to CENTCOM's area of responsibility. Final determination for approval resides with the CENTCOM Surgeon prior to deployment. U.S. Citizenship Required: Yes ACTIVE SECRET DoD Security Clearance Required for this Position: Yes Drug screening: Required for employment, may be tested any time. Travel: Yes, less than 25%. The candidate must be able to travel and/or deploy with relatively short notice in the event of a manning shortfall. Relocation Assistance Available: Yes Position Contingent upon Award of Contract: No TSC Benefits: TSC offers a stable work environment, a competitive salary and a comprehensive benefits package; including ESOP contributions, 401k Matching Program, Flexible Work Schedules, Tuition Reimbursement, Paid Leave and much more. Applying to TSC: Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description Job Type: Contractor Per diem: we offer split pay per diem with weekly pay Hours: overtime is available Experience Requirements B777 Experience Required Minimum 2+ years of experience in MRO environments (e.g., AAR Corp., Aviation Technical Services (ATS), Delta TechOps, Lufthansa Technik, StandardAero, ST Engineering) Be able to read, write, speak, and understand the English language. Technical Skills Adhere to General Work Requirements Comply with Environmental / Health / Safety policies and procedures. Perform all work in a safe and timely manner Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft Perform and document work performed per appropriate manuals and regulations as required Operate ground support equipment as required Perform mechanical / electrical removals and installations Assist in performing complex repairs on aircraft systems Perform other duties as assigned Physical Requirements Able to lift up to 50 lbs Comfortable in physically demanding environments Tools Must supply personal tools (Shadowed and Etched) Powered by JazzHR wr RLVoIyrd

Job Type: Contractor Per diem: we offer split pay per diem with weekly pay Hours: overtime is available License: Airframe & Power Plant License - Required Experience Requirements B777 Experience Required Minimum 2+ years of experience in MRO environments (e.g., AAR Corp., Aviation Technical Services (ATS), Delta TechOps, Lufthansa Technik, StandardAero, ST Engineering) Be able to read, write, speak, and understand the English language. Technical Skills Adhere to General Work Requirements Comply with Environmental / Health / Safety policies and procedures. Perform all work in a safe and timely manner Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft Perform and document work performed per appropriate manuals and regulations as required Operate ground support equipment as required Perform mechanical / electrical removals and installations Assist in performing complex repairs on aircraft systems Perform other duties as assigned Physical Requirements Able to lift up to 50 lbs Comfortable in physically demanding environments Tools Must supply personal tools (Shadowed and Etched)

Job Type: Contractor Per diem: we offer split pay per diem with weekly pay Hours: overtime is available Experience Requirements B777 Experience Required Minimum 2+ years of experience in MRO environments (e.g., AAR Corp., Aviation Technical Services (ATS), Delta TechOps, Lufthansa Technik, StandardAero, ST Engineering) Be able to read, write, speak, and understand the English language. Technical Skills Adhere to General Work Requirements Comply with Environmental / Health / Safety policies and procedures. Perform all work in a safe and timely manner Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft Perform and document work performed per appropriate manuals and regulations as required Operate ground support equipment as required Perform mechanical / electrical removals and installations Assist in performing complex repairs on aircraft systems Perform other duties as assigned Physical Requirements Able to lift up to 50 lbs Comfortable in physically demanding environments Tools Must supply personal tools (Shadowed and Etched)

Job Description Job Type: Contractor Per diem: we offer split pay per diem with weekly pay Hours: overtime is available License: Airframe & Power Plant License - Required Experience Requirements Minimum 2+ years of experience in MRO environments (e.g., AAR Corp., Aviation Technical Services (ATS), Delta TechOps, Lufthansa Technik, StandardAero, ST Engineering) Wide body Aircraft Experience Required (Example: B777, B787, B757, B767, MD11 , B737-800) Be able to read, write, speak, and understand the English language. Technical Skills Structural Inspection: Perform thorough inspections of aircraft structures according to maintenance manuals and regulatory standards. Repair and Modification: Execute repairs and modifications on aircraft structural components using approved techniques and materials. Assembly and Installation: Assemble and install structural components and systems on aircraft, ensuring precision and adherence to engineering drawings. Documentation: Maintain accurate records of inspections, repairs, and modifications performed, complying with regulatory requirements. Safety and Compliance: Adhere strictly to safety protocols and regulatory guidelines during all tasks and operations. Team Collaboration: Work collaboratively with engineers, technicians, and other personnel to ensure efficient workflow and high-quality aircraft maintenance. Completes any or all structural rework/repair, squawks, and E.O.'s. Perform work of the level described herein, interpret complex blueprints and use arithmetic involving decimals and fractions Fabricate detail parts from blueprint or engineering instructions Physical Requirements Able to lift up to 50 lbs Comfortable in physically demanding environments Tools Must supply personal tools Powered by JazzHR KZA672HPYB

Job Type: Contractor Per diem: we offer split pay per diem with weekly pay Hours: overtime is available License: Airframe & Power Plant License - Required Experience Requirements Minimum 2+ years of experience in MRO environments (e.g., AAR Corp., Aviation Technical Services (ATS), Delta TechOps, Lufthansa Technik, StandardAero, ST Engineering) Wide body Aircraft Experience Required (Example: B777, B787, B757, B767, MD11 , B737-800) Be able to read, write, speak, and understand the English language. Technical Skills Structural Inspection: Perform thorough inspections of aircraft structures according to maintenance manuals and regulatory standards. Repair and Modification: Execute repairs and modifications on aircraft structural components using approved techniques and materials. Assembly and Installation: Assemble and install structural components and systems on aircraft, ensuring precision and adherence to engineering drawings. Documentation: Maintain accurate records of inspections, repairs, and modifications performed, complying with regulatory requirements. Safety and Compliance: Adhere strictly to safety protocols and regulatory guidelines during all tasks and operations. Team Collaboration: Work collaboratively with engineers, technicians, and other personnel to ensure efficient workflow and high-quality aircraft maintenance. Completes any or all structural rework/repair, squawks, and E.O.'s. Perform work of the level described herein, interpret complex blueprints and use arithmetic involving decimals and fractions Fabricate detail parts from blueprint or engineering instructions Physical Requirements Able to lift up to 50 lbs Comfortable in physically demanding environments Tools Must supply personal tools

The Flight Line Aircraft Mechanic II may supervise lower skilled mechanics and assist with troubleshooting malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, and auxiliary power unit for CH-53E aircraft. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment. The CH-53E mechanic is responsible for inspecting and maintaining rotor airframes and airframe components and performs duties relating to flight line operation. This worker reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Replaces or repairs worn or damaged components, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removes engine from aircraft, disassembles and inspects parts for wear, cracks, security, or other defects, and repairs or replaces defective engine parts and reassembles and installs engine in aircraft. Uses standard aircraft handling and taxi procedures in accordance with (IAW) Naval Aviation Training and Operating Procedures Standardization (NATOPS), specific aircraft manuals, and local regulations, to support the host squadron. Launches aircraft IAW published flight schedules or as needed to support emergencies. Performs Recovery (pre-positioning support equipment and aircraft directing), including hot brake checks, post flight servicing, static grounding (aircraft to ground) and chocks. Performs acceptance, conditional, daily, phase, pre D-Level, post D-Level, special, transfer, turnaround and zonal aircraft inspections and preoperational and periodic inspections on SE IAW Maintenance Requirements Cards (MRC) and NAVAIR technical manuals. Pre/Post-Op checks, fueling and operation of SE, tools, Individual Material Readiness List (IMRL) and Naval Aviation Metrology and Calibration (METCAL) assigned to the Power Line work center, to include conditional/scheduled inspections and periodic maintenance. Performs all duties in accordance with the Naval Aviation Maintenance Program (NAMP) and Commander Naval Air Forces Instruction 4790.2B. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, conduct maintenance inspections, and perform miscellaneous duties to service aircraft. This incumbent assists with the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, required to keep aircraft in safe operating condition. Performs duties of a Collateral Duty Inspector (CDI) and ensures all maintenance is performed and inspected in accordance with the NAMP and is accountable to the quality assurance officer and aircraft maintenance officer within the Maintenance Department. Requirements Performs routine aircraft maintenance functions Must demonstrate an operational knowledge of aircraft, aircraft systems, engines and component parts Operates aircraft towing equipment in towing operations. Maintains aircraft hydraulic systems Must have knowledge of the proper use of hand tools in aircraft maintenance Must be able to read and write, and interpret and comply with aircraft maintenance procedures, manuals, specifications, and directives, guides and forms used on the job Performs preventive maintenance inspections on aircraft and aircraft systems and subsystems Performs troubleshooting, repair, modifications, corrosion control and preservation of aircraft and aircraft systems and aircraft sub-systems, including fuel, oil and pneudraulic systems Overhauls aircraft components and sub-components. Performs functional checks, inspections, troubleshooting as required and trained Completes maintenance documentation accurately using OOMA, and required forms, as required by job assignment Must show proficiency in the use of OOMA within 90 days after assignment High school diploma or equivalent--General Educational Development (GED) certificate Must be skill qualified in a primary MOS from any of the following OccFlds: 6113/6173, Aircraft Maintenance, equivalent skill designation from other services or possess valid FAA Airframe and Power plant Certification. Must have four (4) years' minimum experience rotary wing aircraft

The Flight Line Aircraft Mechanic troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, and auxiliary power unit for CH-53E aircraft. This mechanic may supervise the jacking and towing of aircraft, makes adjustments and settings such as cable tension and seat movement settings and adjustments; obtains standard parts such as fuel and oil line connections and fittings, cable linkage, and harnesses by referring to parts manuals and by making comparisons with samples, may perform pre-flight, thru-flight, and post-flight maintenance inspections, enter in the maintenance records description of the work performed, and services engines and aircraft components at line station making repairs, short of overhaul required to keep aircraft in safe operating condition. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment. The CH-53E Worker is responsible for inspecting and maintaining rotor airframes and airframe components and performs duties relating to flight line operation. Replaces or repairs worn or damaged components, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removes engine from aircraft, disassembles and inspects parts for wear, cracks, security, or other defects, and repairs or replaces defective engine parts and reassembles and installs engine in aircraft. Uses standard aircraft handling and taxi procedures in accordance with (IAW) Naval Aviation Training and Operating Procedures Standardization (NATOPS), specific aircraft manuals, and local regulations, to support the host squadron. Launches aircraft IAW published flight schedules or as needed to support emergencies. Performs Recovery (pre-positioning support equipment and aircraft directing), including hot brake checks, post flight servicing, static grounding (aircraft to ground) and chocks. Performs acceptance, conditional, daily, phase, pre D-Level, post D-Level, special, transfer, turnaround and zonal aircraft inspections and preoperational and periodic inspections on SE IAW Maintenance Requirements Cards (MRC) and NAVAIR technical manuals. Pre/Post-Op checks, fueling and operation of SE, tools, Individual Material Readiness List (IMRL) and Naval Aviation Metrology and Calibration (METCAL) assigned to the Power Line work center, to include conditional/scheduled inspections and periodic maintenance. Performs all duties in accordance with the Naval Aviation Maintenance Program (NAMP) and Commander Naval Air Forces Instruction 4790.2B. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, conduct maintenance inspections, and perform miscellaneous duties to service aircraft. This incumbent assists with the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, required to keep aircraft in safe operating condition. Requirements Performs aircraft maintenance to include inspection, operational test, repair, and modification of aircraft electrical/avionics systems Demonstrates in-depth knowledge of applicable maintenance/technical manuals and publications, and special tools and test equipment. Must be familiar with operational capabilities and limitations of electrical/avionics systems Performs the troubleshooting and rewiring of complex avionics/electrical systems and subsystems discrepancies and modifications Uses blueprints, schematics, technical drawings and manufacturers' drawings and sketches in the performance of assigned duties May be required to perform Maintenance Operational Checks (MOCs) Completes maintenance documentation accurately using OOMA, and required forms, as required by job assignment. Must show proficiency in the use of OOMA within 90 days after assignment High school diploma or equivalent-General Educational Development (GED) certificate. (2) years' experience on Military aircraft is required. FAA Airframe & Power plants (A&P) certification and relevant civilian aircraft experience may be substituted. Must be able to meet any Government/Company licensing/qualification requirements for the position

The Avionics Aircraft Mechanic III may supervise lower skilled mechanics and assist with troubleshooting malfunctions in flight surfaces and controls, anti-icing, pneudraulic, engines, and auxiliary power unit for CH-53E aircraft. This worker reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Aircraft communications/navigation/electrical systems technicians, CH-53E, install, remove, inspect, test, maintain, and repair systems, components, and ancillary equipment of installed Aircraft Communications/Navigation/Electrical Systems to include Deceptive Electronic Countermeasures (DECM) Systems at the Organizational Maintenance Activity (OMA) level. Must possess a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, and micrometers. Requires working knowledge of technical publications. Receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. Removes, repairs, modifies, tests, troubleshoots, calibrates, and installs electrical systems, equipment and accessories used in aircraft; makes functional checks on electrical systems to ensure performance and reliability and correct malfunctions disclosed by static, ground, and flight tests; and replaces defective wiring and installs new wiring for aircraft changes, modifications and repairs. Overhauls, repairs, modifies and tests aircraft electrical system accessories such as motors, dynamotors, inverters, voltage regulators, relays, cutouts, engine synchronizers, electric motor driven air compressors and activators, DC generators, AC alternators, DC/AC electrical controls, cockpit air conditioning controls, engine temperature controls, and transistorized control equipment, etc. Installs, troubleshoots, calibrates, and tests complex electrical systems and devices on military aircraft to ensure precise performance and reliability of all electrical systems. Sets up test positions using test equipment such as oscilloscopes, audio signal generators, frequency meters, voltmeters, watt meters and ammeters. Tests the various units for compliance with the proper tolerances prescribed for transient time, noise amplitude, and frequencies; adjusts resonant circuits, computes alternative current loads; and makes all necessary adjustments to bring the units up to prescribed operational standards. Performs all duties in accordance with the Naval Aviation Maintenance Program (NAMP) and Commander Naval Air Forces Instruction 4790.2B. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, conducts maintenance inspections, and performs miscellaneous duties to service aircraft. Assists with the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, required to keep aircraft in safe operating condition. Performs duties of a Collateral Duty Quality Assurance Representative (CDQAR) and ensures all maintenance is performed and inspected in accordance with the NAMP and is accountable to the quality assurance officer and aircraft maintenance officer within the Maintenance Department. Requirements Performs aircraft maintenance to include inspection, operational test, repair, and modification of aircraft electrical/avionics systems. Applies advanced technical knowledge to solve complex problems and to provide technical assistance, guidance and instruction to other employees as needed. Possess a high degree of expertise of aircraft electrical/avionics systems Demonstrates in-depth knowledge of applicable maintenance/technical manuals and publications, and special tools and test equipment Must be familiar with operational capabilities and limitations of electrical/avionics systems Possess a thorough working knowledge of the detection, prevention and treatment of corrosion Performs the troubleshooting and rewiring of complex avionics/electrical systems and subsystems discrepancies and modifications Provides technical assistance, guidance and instruction as Estimates and accesses damage of avionics/electrical components/systems as related to crash and mishap damaged aircraft to include repair and/or replacement, man-hours, parts, components, and materials When assigned to the flight line, provide customer support during launch and recovery and aircraft security as required. Completes maintenance documentation accurately using OOMA, and required forms, as required by job assignment. Six (6) years' expereince on Military aircraft is required. AFF Airframe & Powerplants (A&P) certification and relevant civilian aircraft experience may be substituted. Must show proficiency in the use of OOMA within 90 days after assignment High school diploma or equivalent General Educational Development (GED) certificate.