Mechanic jobs at HDR - 1095 jobs

Application close date:Applications will be accepted on an ongoing basis until the requisition is closed.At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! The role is part of the In-Space Systems business unit, which is focused on addressing two of the most compelling challenges in spaceflight today: space infrastructure and increasing mobility on-orbit.**Technical Scope** - As a **Principal-Level FPGA Developer**, you will lead the design, implementation, verification, and testing of our FPGA based solutions for satellite electro-mechanical actuation systems and other avionics. We are looking for someone to apply their technical expertise with dedicated commitment and detailed attention towards reliable and continuously operating electro-mechanical system control in deep space environments. The detailed design will host multiple processors, internal data buses and a mix of custom and reused IP blocks requiring systematic implementation, unit-and chip-level testing, design hardening for radiation and documentation to support third-party customer quality requirements.**Required Experience & Leadership** - The lead shall have experience developing FPGA IP to meet performance, radiation robustness, and reliability for continuously operating electro-mechanical system control in deep space environments. The lead will mentor junior staff, generate working requirements from stakeholder reviews, and deliver quality solutions. Must be a self-starting engineering lead with strong ownership of the end-to-end FPGA solution. An engineer skilled with DO-254 design assurance, human-space rated design, and ASIC development would be preferred.**Special Mentions:*** Relocation provided* Travel expected up to 25% of the time**Responsibilities include but are not limited to:*** Generate FPGA requirements in coordination with systems engineering, hardware engineering, and software engineering* Design, write HDL code, verify and document complex low-level modules* Synthesize reliable radiation robust solutions that work for continuous operations in deep space environments* Lead unit and chip-level testing for FPGA* Drive innovation and leading-edge AI/ML based initiatives for the future of FPGA development in In-Space Systems* Mentor junior engineers**Minimum Qualifications:*** Bachelor of Science in Electrical Engineering, Computer Engineering, or a related discipline.* 10+ years of FPGA/ASIC design and verification work experience for radiation robust solutions operating in deep-space environment* Proficient in writing FPGA level requirements* Experience in writing RTL using Verilog, SystemVerilog, or VHDL* Experience with Clock Domain Crossing, Error Correcting Codes, and safe state machines techniques and analysis* Experience with FPGA development tools such as Xilinx Vivado, and Microchip Libero.* Experience with FPGA Timing Constraint definition, STA, and timing closure.* Proficient in testbench design and usage.* Experience with QuestaSim or equivalent simulator* Experience using FPGA Design and Verification tools in a Linux environment* Working knowledge of DO-254, or other safety-critical standards* Ability to influence others and communicate effectively**Preferred Qualifications:*** Master of Science in Electrical Engineering, Computer Engineering, or a related discipline.* Experience with sophisticated verification techniques such as Universal Verification Methodology (UVM) and Constrained Random Verification.* Experience with scripting languages, such as Python* Experience with revision control systems, such as Git/SVN* Experience with common on-chip bus protocols such as AMBA (AXI, AHB, APB)* Experience leveraging AI/LLMs as a co-pilot### Compensation Range for:CO applicants is $168,414.00-$235,778.55;WA applicants is $177,857.00-$248,999.10**Other site ranges may differ****Culture Statement****Export Control Regulations**Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.**Background Check*** Required for all positions: Blue's Standard Background Check* Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation* Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training.* Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical**Benefits*** Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program.* Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays.* Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details.**Equal Employment Opportunity**Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on “Know Your Rights,” please see .**Affirmative Action and Disability Accommodation**Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at ****************************. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request.**California Applicant Privacy Notice**If #J-18808-Ljbffr

A leading sleep technology company is seeking a mechanical/product design engineering leader in San Francisco. This role involves overseeing the development of complex electromechanical products and leading a team of engineers. Candidates must have over 10 years of experience in electromechanical systems and 2 years of management experience, with expertise in injection molding and electronics integration. This position offers significant responsibilities and collaboration with a high-performance team dedicated to innovation and excellence. #J-18808-Ljbffr

An innovative company is seeking a talented software engineer to join their dynamic Inference team. This role involves designing and implementing infrastructure for large-scale multimodal models, focusing on high-performance delivery of audio and image inputs. You'll collaborate closely with researchers and product teams to push the boundaries of AI technology, ensuring reliable production services. If you thrive in fast-paced environments and enjoy tackling complex challenges, this opportunity offers a chance to make a significant impact in the AI landscape. #J-18808-Ljbffr

VTG is currently seeking a Production Machinery Mechanic at the Fleet Readiness Center at NAS North Island in San Diego, CA. What will you do? * The ideal candidate repairs machinery or mechanical equipment. * Work involves most of the following: examining machines and mechanical equipment to diagnose source of trouble, dismantling or partly dismantling machines and performing repairs that mainly involve the use of hand tools in scraping and fitting parts. * Responsibilities include replacing broken or defective parts with items obtained from stock, and ordering the production of a replacement part by a machine shop or sending the machine to a machine shop for major repairs. * Duties also include preparing written specifications for major repairs or for the production of parts ordered from machine shops, reassembling machines and making all necessary adjustments for operation. Do you have what it takes? * The work of a Production Machinery Mechanic requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience. Included are workers whose duties involve setting up or adjusting machines. * Minimum qualifications are the baseline for determining technical acceptability in the personnel. * Experience must be within the last five years. * All personnel must be U. S. citizens. * Individuals released from Military Service with other than "Honorable Discharges" do not meet minimum qualifications. * Ability to read and interpret data is required. * Ability to read, write, speak and understand English. * High School degree or equivalent required. * May be required to drive company and/or government owned vehicles. Must pass a driving record background check to drive vehicles. VTG's base pay range is $32.08 per hour which is a general guideline for the geographic location, work experience, education, skill level, and/or market considerations.

VTG is currently seeking a Production Machinery Mechanic at the Fleet Readiness Center at NAS North Island in San Diego, CA. What will you do? The ideal candidate repairs machinery or mechanical equipment. Work involves most of the following: examining machines and mechanical equipment to diagnose source of trouble, dismantling or partly dismantling machines and performing repairs that mainly involve the use of hand tools in scraping and fitting parts. Responsibilities include replacing broken or defective parts with items obtained from stock, and ordering the production of a replacement part by a machine shop or sending the machine to a machine shop for major repairs. Duties also include preparing written specifications for major repairs or for the production of parts ordered from machine shops, reassembling machines and making all necessary adjustments for operation. Do you have what it takes? The work of a Production Machinery Mechanic requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience. Included are workers whose duties involve setting up or adjusting machines. Minimum qualifications are the baseline for determining technical acceptability in the personnel. Experience must be within the last five years. All personnel must be U. S. citizens. Individuals released from Military Service with other than "Honorable Discharges" do not meet minimum qualifications. Ability to read and interpret data is required. Ability to read, write, speak and understand English. High School degree or equivalent required. May be required to drive company and/or government owned vehicles. Must pass a driving record background check to drive vehicles. VTG's base pay range is $32.08 per hour which is a general guideline for the geographic location, work experience, education, skill level, and/or market considerations.

Kings III is honored to have been recognized by the Dallas Morning News as a Top 100 Workplace in Dallas and on the national scale for Top Workplaces USA. Results are solely based on survey responses from our team members and we are proud to have ranked in the top 5% for multiple culture drivers including clued-in employees, supportive managers, strong values, meaningful work, leaders-in-the-know, employee appreciation and cross-team cooperation. Watch our video Kings III Emergency Communications is a leading provider of emergency telephones nationwide for elevators, parking garages, public/commercial swimming pools, etc. Our solutions include installation, monitoring, and maintenance. Our phones provide a communication solution when emergencies arise. Kings III Emergency Communications has a rich 30-plus year history in the life safety business, so we understand that our products must work when needed. Most important to our employees and our customers alike is that we stand behind what we sell and service. If there is a problem, we fix it, period. We have an immediate opening for an experienced Elevator Technician. This position will install and/or service emergency phone equipment for our customers in the area market. The person in this position will work independently in the field, complete a daily assigned route, and maintain the inventory and tools on their truck. The Technician will communicate regularly with customers, field supervisors, installation coordinators, sales team members, and other stakeholders in order to gauge the scope of work and provide the full service on the first visit to the customer. The person in this position will be adaptable to work within the demands of changes in routes and work plans as needed. This position serves as the face of our company to new customers, and will need to provide quality customer service, as well as problem solving, troubleshooting, and accurate and complete work. Includes all other duties as assigned by your manager. Requirements: * Two years experience installing and/or repairing elevator telephone and emergency telephone equipment * High School diploma or GED * Must hold current and valid Elevator Mechanic License * Excellent customer service skills * Excellent communication skills and the ability to relate to customers, supervisors, teammates, and installation coordinators, and other teams * Ability to work independently * Ability to schedule work and coordinate with customers * Ability to manage installation projects and complete in a timely manner * Technical fluency to work on a laptop or tablet and process electronic work orders * Ability to track and maintain tools and inventory counts on truck * High attention to detail and quality * Professional appearance * Ability to travel throughout the area, different sites, cities, or states as needed * Overnight travel as needed * Ability to pass a pre-employment background check, motor vehicle record check, and drug screen Physical Requirements: * Kneeling several times a day - up to 10 minutes at a time * Squatting repeatedly - 5-10 min at a time * Walking - an average of 2 miles a day * Able to lift and carry up to 50 lbs. as needed * Reaching and working over your head for 3 to 5 min at a time * Able to carry, climb, and perform work on a 6-foot ladder * Able to work outside in heat, or cold, or inclement weather for periods of time throughout the day Company Benefits: * Medical, dental, vision, life, disability insurance plans offered. * 401k plan with company match. * Employer paid telemedicine benefits. * Eight scheduled paid holidays, plus one paid floating holiday each year. * 15 days of paid time off accrued in the first year. About Our Company: At Kings III, we provide critical communication services to help people in distress. We answer the call when seconds count. We know because we've been making them count when it matters most for over 30 years. Our best-in-class emergency dispatch service helps our customers reduce risk, mitigate liability, and lower their cost, all while simultaneously allowing them to provide better care to their team members, tenants, and guests. Our primary client base includes commercial and multi-family real estate owners and property managers and the most common areas we provide emergency dispatch services are in elevators and at poolside. Our customer retention rate is amazingly high at nearly 98%. Most important to our team and our customers alike is that we stand behind what we sell and service. If there is a problem, we fix it, period. We are in the life safety business and understand our service must work when needed. More than 18% of our team has been with Kings III for 10+ years, and many of them for much longer. We care who we bring on board, and nothing matters more than keeping our company culture intact and thriving. What we do here really matters - not just for our customers and our callers, but for our team members as well. HOW we do it matters even more. Kings III Core Values: You will find our core values, listed below, deeply engrained in the fabric of the company. It's important that everyone in the business is dedicated to these values as we work to lead and grow a team of good citizens - internally and externally speaking. 1. Honesty & Integrity 2. Service to the customer above all else 3. Do what is right 4. Good enough is not good enough; pursue excellence 5. Encourage individual initiative and growth Kings III is an Equal Opportunity Employer and committed to maintaining a drug-free workplace. We do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class. #LI-DNI

Full-time Description Kings III is honored to have been recognized by the Dallas Morning News as a Top 100 Workplace in Dallas and on the national scale for Top Workplaces USA. Results are solely based on survey responses from our team members and we are proud to have ranked in the top 5% for multiple culture drivers including clued-in employees, supportive managers, strong values, meaningful work, leaders-in-the-know, employee appreciation and cross-team cooperation. Watch our video Kings III Emergency Communications is a leading provider of emergency telephones nationwide for elevators, parking garages, public/commercial swimming pools, etc. Our solutions include installation, monitoring, and maintenance. Our phones provide a communication solution when emergencies arise. Kings III Emergency Communications has a rich 30-plus year history in the life safety business, so we understand that our products must work when needed. Most important to our employees and our customers alike is that we stand behind what we sell and service. If there is a problem, we fix it, period. We have an immediate opening for an experienced Elevator Technician. This position will install and/or service emergency phone equipment for our customers in the area market. The person in this position will work independently in the field, complete a daily assigned route, and maintain the inventory and tools on their truck. The Technician will communicate regularly with customers, field supervisors, installation coordinators, sales team members, and other stakeholders in order to gauge the scope of work and provide the full service on the first visit to the customer. The person in this position will be adaptable to work within the demands of changes in routes and work plans as needed. This position serves as the face of our company to new customers, and will need to provide quality customer service, as well as problem solving, troubleshooting, and accurate and complete work. Includes all other duties as assigned by your manager. Requirements: Two years experience installing and/or repairing elevator telephone and emergency telephone equipment High School diploma or GED Must hold current and valid Elevator Mechanic License Excellent customer service skills Excellent communication skills and the ability to relate to customers, supervisors, teammates, and installation coordinators, and other teams Ability to work independently Ability to schedule work and coordinate with customers Ability to manage installation projects and complete in a timely manner Technical fluency to work on a laptop or tablet and process electronic work orders Ability to track and maintain tools and inventory counts on truck High attention to detail and quality Professional appearance Ability to travel throughout the area, different sites, cities, or states as needed Overnight travel as needed Ability to pass a pre-employment background check, motor vehicle record check, and drug screen Physical Requirements: Kneeling several times a day - up to 10 minutes at a time Squatting repeatedly - 5-10 min at a time Walking - an average of 2 miles a day Able to lift and carry up to 50 lbs. as needed Reaching and working over your head for 3 to 5 min at a time Able to carry, climb, and perform work on a 6-foot ladder Able to work outside in heat, or cold, or inclement weather for periods of time throughout the day Company Benefits: Medical, dental, vision, life, disability insurance plans offered. 401k plan with company match. Employer paid telemedicine benefits. Eight scheduled paid holidays, plus one paid floating holiday each year. 15 days of paid time off accrued in the first year. About Our Company: At Kings III, we provide critical communication services to help people in distress. We answer the call when seconds count. We know because we've been making them count when it matters most for over 30 years. Our best-in-class emergency dispatch service helps our customers reduce risk, mitigate liability, and lower their cost, all while simultaneously allowing them to provide better care to their team members, tenants, and guests. Our primary client base includes commercial and multi-family real estate owners and property managers and the most common areas we provide emergency dispatch services are in elevators and at poolside. Our customer retention rate is amazingly high at nearly 98%. Most important to our team and our customers alike is that we stand behind what we sell and service. If there is a problem, we fix it, period. We are in the life safety business and understand our service must work when needed. More than 18% of our team has been with Kings III for 10+ years, and many of them for much longer. We care who we bring on board, and nothing matters more than keeping our company culture intact and thriving. What we do here really matters - not just for our customers and our callers, but for our team members as well. HOW we do it matters even more. Kings III Core Values: You will find our core values, listed below, deeply engrained in the fabric of the company. It's important that everyone in the business is dedicated to these values as we work to lead and grow a team of good citizens - internally and externally speaking. 1. Honesty & Integrity 2. Service to the customer above all else 3. Do what is right 4. Good enough is not good enough; pursue excellence 5. Encourage individual initiative and growth Kings III is an Equal Opportunity Employer and committed to maintaining a drug-free workplace. We do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class. #LI-DNI

Alutiiq Operations Services, LLC has an exciting opportunity for a Fire Suppression System Mechanic supporting Tinker Air Force Base located in Oklahoma City, OK. The Fire Suppression System Mechanic performs the fire suppression duties necessary to maintain all buildings and structures in good repair. Keeps supervisor apprised of unique situations and problems encountered and identify and reports safety, environmental and other work requirements for resolution. Installs, maintains, and repairs installed fire suppression systems in accordance with manufacturer's specifications and National Fire Protection Association standards. Checks pressure gauges on suppression system storage containers and recharges or replaces containers. Performs visual inspections and testing on fire suppression equipment, to include fire pumps and replaces defective components. Visually inspects kitchen hood equipment and replaces defective components. Works with other Mechanics to share specialized skills and experience related to fire systems maintenance and repair. Respond to emergency site maintenance as required Work involves planning and layout of work from blueprints, drawings, models, or verbal instructions. Utilizes and interprets technical manuals, shop directives, blueprints, sketches, diagrams, and specifications, verbal and written instructions. Responsible for completing daily work order log documenting inspections, maintenance and repair information, to include work performed, materials used and hours worked on each assigned work order. Interfaces with customers and responsible for customer feedback, as applicable. Operates motor vehicles in accordance with company vehicle policies. Complies with applicable federal, state, United States Air Force (USAF) and Occupational Safety & Health Administration (OSHA) environmental laws and regulations. Complies with health and safety rules and procedures; performs work in a manner that enhances the safety of the work environment. Incumbent will at all times wear appropriate Personal Protective Equipment (PPE) as determined by position and duties. Performs other related duties as assigned. Accurate, timely, and cost-effective performance of duties. Working harmoniously with customers and fellow co-workers. Maintaining strict confidentiality of all Alutiiq LLC related matters. Accountable for assigned tools, materials and equipment. Cleanliness and safety of shop and work areas. Maintain a safe and healthy work environment within the shops and company vehicles. Utilizes experience to identify needed materials and required man hours to accomplish work. Material will need to be identified accurately enough so that either the Supervisor or clerk can order it. Additionally, required to check both Store Stock and Residue for material that can be utilized. Estimated work hours need to be close enough so supervision can determine needed crew size and method of accomplishment and proper scheduling. This includes the need to schedule utility outages. Requirements High School diploma or equivalency. Current state driver's license, acceptable driving record, and proof of valid insurance. Minimum Five (5) years' experience in repairing and testing of suppression systems. Valid Sprinkler Technician License with the ability to obtain an Oklahoma Sprinkler Technician License within 90 days of employment. Ability to obtain Oklahoma Fire Extinguisher License. Must be knowledgeable in addressable and conventional alarm panels. Must be knowledgeable in water mist special hazard systems. Must be knowledgeable in CO2 special hazard systems. Must be knowledgeable in testing backflow devices. Must be knowledgeable in testing of fire pumps. Must be knowledgeable in operating boom and/or scissor lifts. Ability to obtain and maintain all necessary licenses/IDs/certifications. Ability to solve problems and work independently with minimal supervision. Familiarity with facility/infrastructure codes and standards, as applicable. Ability to adapt to changes in technology and applicable facility/infrastructure codes and standards. Proficiency and knowledge of a variety of hand and power tools. Demonstrated working ability read, write, speak and understand English. Preferred Qualifications and Experience: Seven (7+) years in repairing and testing of suppression systems. Basic computer skills and familiarity with Microsoft Office applications. Military experience. Previous experience working on a military installation. Experience working on Tinker facilities. Basic computer skills (Excel, Word, etc.) Familiarity with military-specific facility/infrastructure codes and standards, as applicable.

Job DescriptionSalary: The Journeyman Mechanical Engineer Piping Systems will develop innovative designs to challenging engineering problems for a wide variety of applications including but not limited to piping systems. The Mechanical Engineer will perform as a task lead on many tasks and as an individual contributor in others. The Mechanical Engineer will develop detailed design criteria from customer requirements and use strong engineering principles and tools to develop robust and reliable solutions. Designs are expected to include hardware such as test fixtures, custom mechanical assemblies, pressure vessels, piping systems, weldments, etc. The Mechanical Engineer will regularly coordinate with engineers from other disciplines and backgrounds to ensure proper design integration. Additionally, the engineer in this role will work closely with designers and operators to ensure designed hardware is manufacturable and maintainable. The Mechanical Engineer will mentor and train junior engineers through on-the-job training and dedicated mentorship activities. Perform task lead activities to ensure proper due diligence for designs within the Mechanical Engineers responsibility Lead and mentor junior engineers to develop strong problem solving, critical thinking, engineering processes Develop innovative designs for custom mechanical and structural hardware Develop design documentation such as presentations, white papers, calculation packages, reports, etc. Perform review of design documentation from other ATS and third-party engineers Present designs and design progress for customer review and feedback Perform structural and possibly aerothermal, thermal-structural, and flow analysis using hand calculations or appropriate software tools to validate mechanical designs. Requirements: 5+ years of relevant experience BS in engineering or related field (equivalent experience may be accepted) Secret DoD Clearance or the ability to obtain a Secret DoD Clearance Desired experience with CAESAR, AFT Fathom, AFT Arrow, Smap3D, Plant 3D, ANSYS, ABAQUS, and MATHCAD Familiarity with CAD modelling, drawing development and GD&T Experience applying engineering codes and standards such as ASME BPVC, ASME B31.3, AISC 360-10, AWS D1.1, ASME Y14.5, etc. Note:ATS is a drug-free workplace. The unlawful manufacture, distribution, dispensing, possession, or use of a controlled substance is prohibited. All candidates who receive conditional offers of employment are subject to drug testing. In addition, ATS is an E-Verify employer. Export Control Regulations: Applicants for employment at ATS must be a U.S. citizen or national, U.S. permanent resident (i.e.current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

Job DescriptionSalary: The Journeyman Mechanical Engineer - Structural will develop innovative designs to challenging engineering problems for a wide variety of applications including but not limited to structural engineering. The Mechanical Engineer will perform as a task lead on many tasks and as an individual contributor in others. The Mechanical Engineer will develop detailed design criteria from customer requirements and use strong engineering principles and tools to develop robust and reliable solutions. Designs are expected to include hardware such as test fixtures, custom mechanical assemblies, pressure vessels, piping systems, weldments, etc. The Mechanical Engineer will regularly coordinate with engineers from other disciplines and backgrounds to ensure proper design integration. Additionally, the engineer in this role will work closely with designers and operators to ensure designed hardware is manufacturable and maintainable. The Mechanical Engineer will mentor and train junior engineers through on-the-job training and dedicated mentorship activities. Perform task lead activities to ensure proper due diligence for designs within the Mechanical Engineers responsibility. Lead and mentor junior engineers to develop strong problem solving, critical thinking, and engineering processes. Develop innovative designs for custom mechanical and structural hardware. Develop design documentation such as presentations, white papers, calculation packages, reports, etc. Perform review of design documentation from other ATS and third-party engineers. Present designs and design progress for customer review and feedback. Perform structural and possibly aerothermal, thermal-structural, and flow analysis using hand calculations or appropriate software tools to validate mechanical designs. Requirements: 5+ years of relevant experience BS in engineering or related field (equivalent experience may be accepted) Secret DoD Clearance or the ability to obtain a Secret DoD Clearance Desired experience with ANSYS or ABAQUS, RISA, Revit, CAESAR, AFT Fathom, AFT Arrow/Fathom, and MATHCAD Familiarity with CAD modelling, drawing development and GD&T Experience applying engineering codes and standards such as ASME BPVC, ASME B31.3, AISC 360-10, AWS D1.1, ASME Y14.5, etc. Note:ATS is a drug-free workplace. The unlawful manufacture, distribution, dispensing, possession, or use of a controlled substance is prohibited. All candidates who receive conditional offers of employment are subject to drug testing. In addition, ATS is an E-Verify employer. Export Control Regulations: Applicants for employment at ATS must be a U.S. citizen or national, U.S. permanent resident (i.e.current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

Job Summary The Mobile Response Team (MRT) Maintenance Technicians will be based in Boise and will require travel . These technicians will be responsible for repair and maintenance service of aircraft using test equipment and hand tools, as needed, to return aircraft to service per FAA and manufacturers specifications. **Schedule rotation is 7 days on 7 days off - Monday through Sunday** Duties & Responsibilities Ensures proper care of customer property through all phases of work Accurately completes required paperwork and work order details in Corridor Continually keeps clean and organized work area including personal tool box Meets or beats flat rates for assigned tasks Understands and follows safety procedures, and utilizes support equipment in a safe manner to accomplish work Qualifications & Job Requirements Minimum three (3) years' experience in general business aviation Owns hand tools to complete work (list will be provided) Requires extensive travel Extensive experience with general aviation aircraft and ability to complete projects with no supervision required Airframe & Powerplant certifications required Able to work independently and as part of a team Good problem-solving skills and ability to follow directions Organized and detail oriented Effective oral and written communication skills Positive attitude, professional appearance and demeanor Basic sheet metal skills and/or basic electrical capabilities considered a plus Other Prerequisites Pass pre-employment drug screen and background check Ability to obtain Airport Issued security badge Valid Driver's License Work Environment & Physical Requirements Work is performed in a hangar environment and requires regular fieldwork where the employee will be exposed to outdoor weather and industrial type noise conditions. Must have willingness and ability to lift and move items weighing up to 50 lbs. and 25 lbs. overhead. Daily activities include frequent bending, stooping, kneeling, twisting, and turning to pick parts from lower shelves, pulling and working at heights; Reaching overhead above the shoulders and horizontally. Available Benefits Medical, dental, vision Short term & Long term Disability - paid 100% by Company Life & Accidental Death and Dismemberment - paid 100% by Company Paid vacation, holidays, sick leave, jury duty, bereavement Health Savings Account or Health Reimbursement Account (employer contributions tied to participation in wellness program) 401K & Roth 401k with employer match Flexible Spending programs Western Aircraft Inc. has a Drug Free Workplace Policy which includes applicants passing pre-employment testing in accordance with 14 CFR 120. Applicants testing positive for the presence of prohibited drugs are ineligible for employment. DOT applicants who become employees of Western Aircraft Inc. will also be subject to random, reasonable cause, reasonable suspicion, and post-accident testing. Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description Job Summary The Mobile Response Team (MRT) Maintenance Technicians will be based in Boise and will require travel . These technicians will be responsible for repair and maintenance service of aircraft using test equipment and hand tools, as needed, to return aircraft to service per FAA and manufacturers specifications. **Schedule rotation is 7 days on 7 days off - Monday through Sunday** Duties & Responsibilities Ensures proper care of customer property through all phases of work Accurately completes required paperwork and work order details in Corridor Continually keeps clean and organized work area including personal tool box Meets or beats flat rates for assigned tasks Understands and follows safety procedures, and utilizes support equipment in a safe manner to accomplish work Qualifications & Job Requirements Minimum three (3) years' experience in general business aviation Owns hand tools to complete work (list will be provided) Requires extensive travel Extensive experience with general aviation aircraft and ability to complete projects with no supervision required Airframe & Powerplant certifications required Able to work independently and as part of a team Good problem-solving skills and ability to follow directions Organized and detail oriented Effective oral and written communication skills Positive attitude, professional appearance and demeanor Basic sheet metal skills and/or basic electrical capabilities considered a plus Other Prerequisites Pass pre-employment drug screen and background check Ability to obtain Airport Issued security badge Valid Driver's License Work Environment & Physical Requirements Work is performed in a hangar environment and requires regular fieldwork where the employee will be exposed to outdoor weather and industrial type noise conditions. Must have willingness and ability to lift and move items weighing up to 50 lbs. and 25 lbs. overhead. Daily activities include frequent bending, stooping, kneeling, twisting, and turning to pick parts from lower shelves, pulling and working at heights; Reaching overhead above the shoulders and horizontally. Available Benefits Medical, dental, vision Short term & Long term Disability - paid 100% by Company Life & Accidental Death and Dismemberment - paid 100% by Company Paid vacation, holidays, sick leave, jury duty, bereavement Health Savings Account or Health Reimbursement Account (employer contributions tied to participation in wellness program) 401K & Roth 401k with employer match Flexible Spending programs Western Aircraft Inc. has a Drug Free Workplace Policy which includes applicants passing pre-employment testing in accordance with 14 CFR 120. Applicants testing positive for the presence of prohibited drugs are ineligible for employment. DOT applicants who become employees of Western Aircraft Inc. will also be subject to random, reasonable cause, reasonable suspicion, and post-accident testing. Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionSalary: The Journeyman Mechanical Engineer - Structural will develop innovative designs to challenging engineering problems for a wide variety of applications including but not limited to structural engineering. The Mechanical Engineer will perform as a task lead on many tasks and as an individual contributor in others. The Mechanical Engineer will develop detailed design criteria from customer requirements and use strong engineering principles and tools to develop robust and reliable solutions. Designs are expected to include hardware such as test fixtures, custom mechanical assemblies, pressure vessels, piping systems, weldments, etc. The Mechanical Engineer will regularly coordinate with engineers from other disciplines and backgrounds to ensure proper design integration. Additionally, the engineer in this role will work closely with designers and operators to ensure designed hardware is manufacturable and maintainable. The Mechanical Engineer will mentor and train junior engineers through on-the-job training and dedicated mentorship activities. Perform task lead activities to ensure proper due diligence for designs within the Mechanical Engineers responsibility. Lead and mentor junior engineers to develop strong problem solving, critical thinking, and engineering processes. Develop innovative designs for custom mechanical and structural hardware. Develop design documentation such as presentations, white papers, calculation packages, reports, etc. Perform review of design documentation from other ATS and third-party engineers. Present designs and design progress for customer review and feedback. Perform structural and possibly aerothermal, thermal-structural, and flow analysis using hand calculations or appropriate software tools to validate mechanical designs. Requirements: 5+ years of relevant experience BS in engineering or related field (equivalent experience may be accepted) Secret DoD Clearance or the ability to obtain a Secret DoD Clearance Desired experience with ANSYS or ABAQUS, RISA, Revit, CAESAR, AFT Fathom, AFT Arrow/Fathom, and MATHCAD Familiarity with CAD modelling, drawing development and GD&T Experience applying engineering codes and standards such as ASME BPVC, ASME B31.3, AISC 360-10, AWS D1.1, ASME Y14.5, etc. Note:ATS is a drug-free workplace. The unlawful manufacture, distribution, dispensing, possession, or use of a controlled substance is prohibited. All candidates who receive conditional offers of employment are subject to drug testing. In addition, ATS is an E-Verify employer. Export Control Regulations: Applicants for employment at ATS must be a U.S. citizen or national, U.S. permanent resident (i.e.current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

Job DescriptionSalary: The Journeyman Mechanical Engineer Piping Systems will develop innovative designs to challenging engineering problems for a wide variety of applications including but not limited to piping systems. The Mechanical Engineer will perform as a task lead on many tasks and as an individual contributor in others. The Mechanical Engineer will develop detailed design criteria from customer requirements and use strong engineering principles and tools to develop robust and reliable solutions. Designs are expected to include hardware such as test fixtures, custom mechanical assemblies, pressure vessels, piping systems, weldments, etc. The Mechanical Engineer will regularly coordinate with engineers from other disciplines and backgrounds to ensure proper design integration. Additionally, the engineer in this role will work closely with designers and operators to ensure designed hardware is manufacturable and maintainable. The Mechanical Engineer will mentor and train junior engineers through on-the-job training and dedicated mentorship activities. Perform task lead activities to ensure proper due diligence for designs within the Mechanical Engineers responsibility Lead and mentor junior engineers to develop strong problem solving, critical thinking, engineering processes Develop innovative designs for custom mechanical and structural hardware Develop design documentation such as presentations, white papers, calculation packages, reports, etc. Perform review of design documentation from other ATS and third-party engineers Present designs and design progress for customer review and feedback Perform structural and possibly aerothermal, thermal-structural, and flow analysis using hand calculations or appropriate software tools to validate mechanical designs. Requirements: 5+ years of relevant experience BS in engineering or related field (equivalent experience may be accepted) Secret DoD Clearance or the ability to obtain a Secret DoD Clearance Desired experience with CAESAR, AFT Fathom, AFT Arrow, Smap3D, Plant 3D, ANSYS, ABAQUS, and MATHCAD Familiarity with CAD modelling, drawing development and GD&T Experience applying engineering codes and standards such as ASME BPVC, ASME B31.3, AISC 360-10, AWS D1.1, ASME Y14.5, etc. Note:ATS is a drug-free workplace. The unlawful manufacture, distribution, dispensing, possession, or use of a controlled substance is prohibited. All candidates who receive conditional offers of employment are subject to drug testing. In addition, ATS is an E-Verify employer. Export Control Regulations: Applicants for employment at ATS must be a U.S. citizen or national, U.S. permanent resident (i.e.current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

Position Title: Aircraft Mechanic Location: Fargo Jet Center - Fargo, ND Shift: Monday-Friday | 8:00 AM - 5:00 PM Join a Leader in General Aviation Fargo Jet Center is a full-service general aviation company based in North Dakota, internationally recognized for excellence in aviation services. Consistently ranked among the top aviation service providers in North America, we are looking for skilled and motivated Aircraft Mechanics to join our team and contribute to our continued success. What You'll Do: As an Aircraft Mechanic at Fargo Jet Center, you'll be responsible for performing both scheduled and unscheduled maintenance on a wide variety of general aviation aircraft, including but not limited to: Piper, Cessna, Pilatus, Hawker, Beechcraft, Gulfstream, Bombardier, and Cirrus. You'll play a key role in maintaining safety, quality, and performance standards while collaborating with a team that takes pride in precision and professionalism. What We're Looking For: Active FAA A&P License required Experience in General Aviation, Commercial, or Military aviation settings is welcome Preference given to candidates with hands-on experience on Cessna, Pilatus, Learjet, King Air, Cheyenne, Citation, and/or Cirrus airframes Responsibilities: Perform high-quality inspections including 100-hour, annual, and phase inspections Diagnoses, test, repair, and maintain aircraft airframes and systems Troubleshoot and perform complex structural fitting and installations Utilize technical data to ensure compliant and accurate maintenance Order parts and components as needed Complete documentation per FAA regulations and company policy Collaborate with the Maintenance Director and Leads; perform other duties as assigned What We Offer: Comprehensive health benefits (Medical, Dental, Vision) HSA and flexible spending programs Life and Accidental Death & Dismemberment insurance (100% Company Paid) Long-Term Disability insurance (100% Company Paid) 401(k) with employer match Paid time off and paid holidays Employee Assistance Program (EAP) and Wellness Program If you're ready to advance your aviation maintenance career with a trusted and dynamic team, apply today and help keep our fleet flying safely! Fargo Jet Center has a Drug Free Workplace Policy which includes applicants passing pre-employment testing. Applicants testing positive for the presence of prohibited drugs are ineligible for employment. FAA and DOT applicants who become employees of Fargo Jet Center will also be subject to random, reasonable cause, reasonable suspicion, and post-accident testing. Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Aircraft Mechanic Shift: Monday-Friday | 8:00 AM - 5:00 PM Join a Leader in General Aviation Fargo Jet Center is a full-service general aviation company based in North Dakota, internationally recognized for excellence in aviation services. Consistently ranked among the top aviation service providers in North America, we are looking for skilled and motivated Aircraft Mechanics to join our team and contribute to our continued success. What You'll Do: As an Aircraft Mechanic at Fargo Jet Center, you'll be responsible for performing both scheduled and unscheduled maintenance on a wide variety of general aviation aircraft, including but not limited to: Piper, Cessna, Pilatus, Hawker, Beechcraft, Gulfstream, Bombardier, and Cirrus. You'll play a key role in maintaining safety, quality, and performance standards while collaborating with a team that takes pride in precision and professionalism. What We're Looking For: Active FAA A&P License required Experience in General Aviation, Commercial, or Military aviation settings is welcome Preference given to candidates with hands-on experience on Cessna, Pilatus, Learjet, King Air, Cheyenne, Citation, and/or Cirrus airframes Responsibilities: Perform high-quality inspections including 100-hour, annual, and phase inspections Diagnoses, test, repair, and maintain aircraft airframes and systems Troubleshoot and perform complex structural fitting and installations Utilize technical data to ensure compliant and accurate maintenance Order parts and components as needed Complete documentation per FAA regulations and company policy Collaborate with the Maintenance Director and Leads; perform other duties as assigned What We Offer: Comprehensive health benefits (Medical, Dental, Vision) HSA and flexible spending programs Life and Accidental Death & Dismemberment insurance (100% Company Paid) Long-Term Disability insurance (100% Company Paid) 401(k) with employer match Paid time off and paid holidays Employee Assistance Program (EAP) and Wellness Program If you're ready to advance your aviation maintenance career with a trusted and dynamic team, apply today and help keep our fleet flying safely! Fargo Jet Center has a Drug Free Workplace Policy which includes applicants passing pre-employment testing. Applicants testing positive for the presence of prohibited drugs are ineligible for employment. FAA and DOT applicants who become employees of Fargo Jet Center will also be subject to random, reasonable cause, reasonable suspicion, and post-accident testing. Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview The Fuel Distribution System Mechanic receives, stores, transfers, logs fuel data. The Mechanic may inspect and assist with the repair of pipelines, hoses and other connecting systems. The Mechanic will gauge tanks for water, temperature and fuel levels, check pumping systems for correct operating pressure or unusual noises and perform preventative maintenance and repairs on assigned systems. Pay Rate: $32.52/hourly Work Model: Onsite/Office-based Responsibilities Essential Duties & Job Functions: * Observes and interprets readings on gauges, meters, and charts which register various aspects of fuel maintenance and delivery operations. * Adjusts controls to insure safe and efficient operation and to meet demands for fuel. * Cleans strainers, filters, fuel tanks and distribution lines removing corrosion and re-painting surfaces. * Lubricates pumps, and replaces gaskets, seals, and fuel filters as needed. * Corrects pumping misalignment and makes repairs to equipment; following prescribed methods. * Inspects and diagnoses problems to determine corrective repairs. * Completes all job-related paperwork and forms. * Uses a variety of hand tools, portable power tools, and standard measuring instruments. * Coordinates with other personnel in the identification of proper and correct materials, parts assemblies, and requirements for a variety of requisitions necessary for the job/task. * Performs on call, preventive and emergency site maintenance, as necessary. * Performs periodic stock inventories and prepares material requisitions. * Operates Government or company-owned motor vehicles and/or other equipment. * Supports and assists other department staff and trade groups as needed or directed. * Adheres to the established CFS safety and personnel policies and standard operating procedures. * Ability to work overtime as needed. * Performs other duties as assigned. Job Requirements Mandatory: * High school graduate or equivalent GED. * Five (5) years of experience in operation of fuel distribution systems including delivery, repair and maintenance. * Hold or obtain a Class A and B Fuel Certification (Underground Storage Tank - UST) within 90 days. * Ability to pass pre-hire background and drug screen. * U.S. Citizenship. * Ability to obtain and maintain the required intelligence community level clearance. * Valid state driver's license and suitable driving record. * Ability to lift 50 pounds and team lift 75 pounds. Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any if its subsidiaries, please email ****************** Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status, or other characteristics protected by law.

For more than 30 years, ERC has been delivering the advantage needed to solve our customers' and the nation's toughest challenges. ERC is a trusted partner to the Defense and Space communities. We provide the advanced engineering, innovative technology, and subject-matter expertise to deliver the mission results our customers need to keep the nation safe and secure. Our unique solutions enhance readiness, optimize performance, and help ensure success in the air, on the ground and in space. An essential part of our success is our corporate culture built on respect, empowerment, and collaboration. Our culture elevates our people, ensuring they provide best-in-class service and solutions to our customers. We always strive to do the right thing. We believe that are our people are our best asset and human connection our greatest strength. Check us out on ERC.US Your role: In your role as a Warehouse Aircraft Technical Inspector, you will serve as team member responsible for assessing the serviceability and condition of various aviation components IAW Army Regulations, Technical Manuals, policies, and procedures. As a member of a warehouse team, you will use your experience and knowledge to ensure condition accuracy, traceability, and asset accountability across a range of activities associated with supply chain management. Your position will report to the Quality Lead and is a part of a multi team effort to support multiple customer requirements. What you'll do all day: Processes the technical experience to supervise subordinate mechanics and provide technical guidance on maintenance operations on the airframe being supported. A person in this position maintains repairs and modifies aircraft structures, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. This worker also applies professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable densitometers, sheet metal brakes and sheers, etc. is required. Must possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. Plan and conduct aircraft components technical inspections. Understands the fundamentals and inspection techniques of general aviation maintenance. Performs troubleshooting and analyze electrical/electronic systems. Provide technical guidance to repairers performing aircraft components and subsystem maintenance on maintenance techniques and safety procedures. You will love this job if you: Are a self-starter and require little oversight to complete given tasks? Enjoy a fast-paced work environment. Love working with diverse groups of individuals, including engineers and technicians. Are good at communicating with people. Have a positive attitude. Enjoy multitasking. Minimum requirements for this position: High School diploma or equivalent 6 years' experience as a Lead Aviation Mechanic. Must be able to obtain and maintain a Secret Clearance (U.S. Citizenship is required for all applicants) What we offer: Competitive salaries. Continuing education assistance. Professional development allotment. Multiple healthcare benefit packages. 401K with employer matching. Paid time off (PTO) along with federally recognized holiday schedule.

The Ultra Care Technician I is responsible for performing regularly scheduled maintenance of industrial batteries and related products at the client site. Responsibilities: Represents the company in a neat and professional manner in accordance with company standards. Practices safety and good housekeeping in all circumstances. Performs battery inspections, battery watering, battery washing, and full-scale inspection including recording of cell voltages and specific gravities. Performs watering system installations. Conveys information to proper customer contacts. Safely operates a service vehicle and keeps it in good working order. Operates a forklift and reach truck on a regular basis. Recognizes and addresses safety and EPA issues. Safely and correctly processes non-potable water recovered by the battery wash. Tests for and analyzes results of acidity level of water (pH). Performs voltage testing and pressure washing of battery. Maintains an accurate assigned parts inventory. Actively promotes point of sale items and allied products and services. Follows assigned schedule to ensure regular product maintenance. Complies with company policies and procedures (regarding issues such as warranty, safety, environmental, OSHA, and hazmat). Ensures work orders are filled out properly and submitted in a timely manner. Establishes and maintains good working relationships with customers. Communicates with others (supervisor, company technicians or other departments, as needed), to coordinate necessary repairs or either resolve customer complaints or seize opportunities. All other duties as required. Skills / Other: Able to read and comprehend documents, such as safety rules, operating and maintenance instructions, plus procedural and technical manuals. Able to interpret and follow instructions (provided in written, oral, diagram, or schedule form). Able to prioritize work, work independently, and move from task to task. Analytical and critical thinker. Detail-oriented. Troubleshooting skills, able to define problems and solve them. Strong customer service skills, including active listening. Solid organizational skills. Deadline-driven, self-motivated. Education/ Training: High School graduate or equivalent, required. Associate's degree in a technical area, or equivalent combination of work experience and education, preferred. Basic knowledge of Microsoft Office (Word, Excel, and Outlook) and the internet. Able to operate communications equipment in a mobile environment (cellphone, laptop, etc.). Working knowledge of standard shop tools. Forklift certified, have or will train. Reach truck operation, experienced or will train. Safety training for Spill Containment and Lead Level. FRED electrical training will be provided. Basic charger training (industrial batteries and their chargers, DC cables and displays) will be provided. Clean and current Driver's license (MVR check) in the applying State. Basic understanding of electricity/electronics. Has the experience and ability to safely complete all tasks of a Shop Technician III without supervision. Experience: 1-3 Years of experience involving battery industry or related experience, preferably within a field service environment. Prior sales or customer service in a field service environment, strongly preferred. Compensation: $18/hr DOE