Automatically apply for jobs with Zippia

Upload your resume to get started.

Health and safety inspector skills for your resume and career

Updated January 8, 2025

4 min read

Quoted experts

Wesley Tinker,

Wesley Tinker

Below we've compiled a list of the most critical health and safety inspector skills. We ranked the top skills for health and safety inspectors based on the percentage of resumes they appeared on. For example, 11.2% of health and safety inspector resumes contained ventilation as a skill. Continue reading to find out what skills a health and safety inspector needs to be successful in the workplace.

15 health and safety inspector skills for your resume and career

1. Ventilation

Here's how health and safety inspectors use ventilation:

Oversee third-party and in-house industry hygiene sampling of ventilation, noise, and lead particulate concentration related to operations/maintenance and construction.
Investigated adequacy of ventilation, exhaust equipment, lighting, and other conditions affecting employee health, comfort, and efficiency.

2. Training Programs

Here's how health and safety inspectors use training programs:

Evaluated the effectiveness of training programs and recommended improvements to upper management to ensure compliance.
Developed and presented training programs to facilitate understanding and implementation of safety, health and environmental regulations and best practices.

3. EPA

The Environmental Protection Agency (EPA) is a US-based organization established to sustain and improve the environmental and human health standards across the United States. EPA was established by US President Richard Nixon by executive order in December 1970. The EPA formulates laws and releases guidelines to promote the health of individuals and the ecosystem.

Here's how health and safety inspectors use epa:

Called and scheduled participants in order to bring in and deliver vehicles used for emissions testing at the EPA.
Design, develop, implement and provide training and exercises in accordance with DOE, OSHA, EPA and the NRC.

4. MSHA

Here's how health and safety inspectors use msha:

Attended MSHA training as needed and maintained current knowledge on policy and procedures.
Set an example of being professional to all MSHA employees.

5. Health Standards

Here's how health and safety inspectors use health standards:

Utilized knowledge of safety-engineering practices, available protective devices, safety testing and occupational safety and health standards.

6. Occupational Safety

Occupational safety, also known as occupational health, deals with preventing diseases, injuries, and deaths that arise because of working conditions.

Here's how health and safety inspectors use occupational safety:

Utilize computer based policy and procedure system and was as for record keeping and delivery of exams relative to occupational safety.
Inspected machinery, equipment and working conditions in industrial or other settings to ensure compliance with occupational safety and health regulations.

7. Technical Advice

Here's how health and safety inspectors use technical advice:

Discussed inspection findings and provided technical advice and assistance to mine management and personnel.

8. Hazardous Waste

Here's how health and safety inspectors use hazardous waste:

Trained employees on the storm water and hazardous waste management regulations.
Coordinated training on Material Handling equipment, company policies and procedures, equipment safety and operation and managed hazardous waste disposal.

9. NFPA

Here's how health and safety inspectors use nfpa:

Maintained thorough working knowledge of OSHA, NFPA, ANSI standards and special policy changes from AFRC.
Perform safety and NFPA inspections/hazard identification and elimination.

10. ANSI

Here's how health and safety inspectors use ansi:

Experienced in OSHA and ANSI regulations, compliance procedures.
Conduct research for compliance directives through multiple regulatory guidelines and directives including NIOSH, NFPA and ANSI.

11. Site Safety

Here's how health and safety inspectors use site safety:

Conduct site surveys, Quality control and Auditing for implementation of environmental, health and site safety measures.
Perform site safety orientation training for new hire employees and contractors in English and Spanish.

12. Safety Procedures

Safety procedures are a set of standardized procedures, that ensures minimal to no risk to people, resources, and the work environment. A company follows the step-by-step safety procedures as it they not only keep the customers and the employees safe, but also help in avoiding legal claims.

Here's how health and safety inspectors use safety procedures:

Assisted in the development of new safety procedures, safety program, auditing process, and incentive/awards program.
Conduct safety inspections and investigate violations to ensure safety procedures are being followed as well as counsel managers and employees accordingly.

13. Safety Audits

A safety audit is the periodic evaluation of safety practices within an organization. Information is collected on the efficiency, effectiveness, and reliability of the entire health and safety management system of the company. Its objective is to determine whether or not an organization is complying with appropriate safety regulations and to identify weaknesses in safety programs and processes to identify corrective actions that need to be taken. Safety audits can be performed internally by supervisors and employees or by external auditors.

Here's how health and safety inspectors use safety audits:

Conducted daily and weekly safety audits.
Supported client EHS initiatives, conducted safety audits, completed industrial hygiene sampling and assisted with safety program development and implementation.

14. EHS

Environment, Health, and Safety - EHS is a generic term for laws, rules, regulations, professions, and programs designed to protect the health and safety of the public and the environment from hazards. Its objective is to prevent and reduce accidents, emergencies, and health problems, including in the workplace, as well as the environmental damage that may result from work practices. Organizations must do this to ensure that their activities do not harm anyone.

Here's how health and safety inspectors use ehs:

Collaborate with PMT to ensure appropriate EHS leadership behaviors and activities are followed on project.
Reviewed and approved EHS documentation, conducted EHS audits and provided a follow-up to ensure audit recommendations are implemented.

15. Safety Regulations

Here's how health and safety inspectors use safety regulations:

Enforced safety regulations in accordance to S & B and OSHA's standards.
Inspect campus to make sure facilities are in compliance with U.S. safety regulations

What skills help Health And Safety Inspectors find jobs?

Tell us what job you are looking for, we’ll show you what skills employers want.

What hard/technical skills are most important for health and safety inspectors?

Wesley Tinker

Assistant Professor of Safety, University of Central Missouri

-Risk assessment skills are a must; without them, the individual will be lost.
-Ventilation and noise calculations as well as monitoring procedures.
-How to calibrate hazard monitoring equipment.
-Instructional skills. The safety professional spends a large portion of their days training workers to perform their tasks safely either in a classroom setting or individually on site.
-Ability to perform thorough accident investigations and provide preventative control measures based on causal factors found.
-Ability to quantitate values of risk versus controls as well as cost/benefit analysis.
-The technical uses for analytical techniques to break down analysis' in several different functions of the job duties.
-Able to apply OSHA requirements to specific site functions, i.e., secondary containment, hot works, and elevated working surfaces.

What skills stand out on health and safety inspector resumes?

Wesley Tinker

Assistant Professor of Safety, University of Central Missouri

When reviewing an Occupational Health and Safety Professional resumes, specific items stand out from a viewer's standpoint.

-Whether the degree program they graduated from is ABET-accredited.
-Obtaining the Graduate Safety Practitioner (GSP) upon graduation from a qualified degree program shows that the candidate has been very well educated for the safety profession.
-The experience from their internships. Expect to be asked about their day-to-day duties while in their internship.
-Professional skills noted such as time management, customer service, technological abilities, and overall organizational skills.
-Affiliations with safety organizations as well as student chapter organizations, such as the American ---Society of Safety Professionals (ASSP).
-Limiting to a single page for a resume is important. Most entry-level safety professionals are hired knowing they do not possess all the skill sets that a seasoned safety professional might have. The average resume for most industries is viewed for approximately 6 to 7 seconds. Having high-profile information toward the top of the resume is critical if wanting to be brought in for an interview.
-Certifications in OSHA 10 and 30, CPR/First Aid, as well as CPR/First Aid Instructor certification, is a very large advantage. If one really wanted to stand out, an EMT-B license would help too.

What soft skills should all health and safety inspectors possess?

Wesley Tinker

Assistant Professor of Safety, University of Central Missouri

In the safety profession, one must be personable and know how to read the crowd and the individual.
-A strong work ethic is a standout for anyone, but effective multi-tasking in the safety profession will set you apart.
-As noted, time management is a professional trait all must possess to be successful in almost any industry.
Handling pressure and keeping composure under stressful situations shows your professionalism and handling most tasks presented to you.
Continuous improvement objectives so that the site safety culture is always advancing toward high worker morale and management support for what the safety professional is attempting to achieve.

What health and safety inspector skills would you recommend for someone trying to advance their career?

Dr. Nick Nichols Professor

Professor, Southeastern Oklahoma State University

In my opinion, in the field of Occupational Safety and Health (OSH) the first and foremost skill that both entry-level and veteran workers in the field must cultivate is the ability to get along well with people. ALL TYPES of people. From the most reluctant to participate in safety, to the most eager. Regardless of what area of the field OSH professionals choose, at some point they must deal with multiple types of personalities. Be flexible, sharpen your soft skills, and be prepared to face both negative and positive attitudes toward the field with the utmost professionalism. Beyond that, the rise of technology and social media in the field can't be ignored. From the use of drones to conduct safety inspections (both at the federal government and corporate levels) to the need to network via social media with other safety professionals, organizations, and governmental entities, entrants into the field must be technically proficient interacting with technology all along this spectrum. Additionally, proficiency with these types of technologies will enable them to successfully utilize the ever-evolving equipment a safety professional must utilize to perform the practical work they must complete effectively in the field on a regular basis.

Do you want to know more?

List of health and safety inspector skills to add to your resume

The most important skills for a health and safety inspector resume and required skills for a health and safety inspector to have include:

Ventilation
Training Programs
EPA
MSHA
Health Standards
Occupational Safety
Technical Advice
Hazardous Waste
NFPA
ANSI
Site Safety
Safety Procedures

Safety Audits
EHS
Safety Regulations
Mine Operators
Health Hazards
OSH
Health Inspections
On-Site Inspections
Asbestos
Air Quality
Safety Inspections
Respiratory Protection

JHA
Safety Program
Safety Standards
Hazardous Materials
Mine Management
Fall Protection
Safety Issues
CFR
LOTO
Oversight
Safety Rules
Safety Violations

Updated January 8, 2025

Zippia Team

Editorial Staff

The Zippia Research Team has spent countless hours reviewing resumes, job postings, and government data to determine what goes into getting a job in each phase of life. Professional writers and data scientists comprise the Zippia Research Team.

Zippia Careers
Healthcare Practitioner and Technical Industry
Health And Safety Inspector
Health And Safety Inspector Skills

Updated January 8, 2025

Browse healthcare practitioner and technical jobs