Heavy Equipment Operator - Excavator
Heavy equipment operator job in Wilmington, NC
POSITIONS AVAILABLE: 5 PRIMARY FUNCTION: Operate one or several types of power construction equipment including but not limited to motor-graders, bulldozers, rubber tire backhoes or trackhoes, rollers, articulated dump truck drivers, front-end loaders or hydraulic excavators to excavate, move, and grade earth, erect structures, or pour concrete, asphalt, or other hard surface pavement on road beds, parking lots, airport runways and taxiways. May perform minor repairs and maintain equipment in addition to other duties.
ESSENTIAL DUTIES:
Utilities Division Heavy Equipment Operators
1.) Load and move dirt, rocks, equipment, or other materials, using trucks, power cranes, shovels, or related equipment.
2.) Start machine, engage clutch, and push and move levers, switches, and pedals to guide machine along forms or guidelines and to control the operation of machine attachments, such as blades, buckets, scrapers, or swing booms.
3.) Drive and maneuver equipment equipped with blades in successive passes over working areas to remove topsoil, vegetation, or rocks or to distribute and level earth or terrain.
4.) Operate machines to spread, smooth, level, or steel-reinforce stone, concrete, or asphalt on road beds or other job sites as needed.
5.) Operate tamping machines or manually roll surfaces to compact earth fills, foundation forms, and finished road materials, according to grade specifications.
6.) Observe grade in order to adjust machine settings and indicate low spots for workers to add material.
7.) Conduct documented pre-shift inspections of equipment for safety and mechanical defects.
8.) Work long, flexible hours as demanded by our customers including nights, weekends, and work outside for extended periods during all seasons of the year.
10.) Align machines, cutter heads, or depth gauge makers with reference stakes and guidelines or ground or position equipment, following hand signals of other workers.
11.) Coordinate machine actions with other activities, positioning or moving loads in response to hand or audio signals from crew members.
12.) Inspect, clean, maintain, and repair equipment, using mechanics' hand tools. Conduct pre-shift inspections and report any concerns or malfunctions to supervisors.
13.) Learn and follow safety regulations.
14.) Take actions to avoid potential hazards or obstructions, such as utility lines, other equipment, other workers, or falling objects.
15.) Perform necessary work while complying with all company policies and procedures.
16.) Perform additional duties as required or directed by their immediate supervisor or other manager.
17.) Must have regular and predictable attendance.
MINIMUM REQUIREMENTS:
Education:
* High school diploma or GED
* Must be a minimum of 18 years old.
Work Experience:
* Must be able to operate multiple pieces of equipment.
* Must be willing to use hand tools while not operating equipment.
* Minimum of 3 years' operating and utility work experience.
* Must have a good work ethic and work as a team player; including operating different types of equipment and general labor work if needed.
SPECAL QUALIFICATIONS:
Experience pulling trench boxes and sloping excavations.
Heavy Physical Demands:
Heavy physical effort required including pulling and lifting or moving heavy weight material with frequent lifting or moving materials or equipment (over 80 pounds). If a position specific Physical Demands sheet is attached, it will describe in more detail the physical demands that are required.
Physical Activity:
Position requires the ability to continuously work around any or all of the following: noise, dust, heat, cold, oil and heavy equipment. Personal protective equipment is normally required of the position. Position requires ability to exchange ideas quickly and clearly and the ability to receive and evaluate detailed information and instructions.
The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time.
EOE. Minorities/Women/Protected Veterans/Individuals with Disabilities.
Shop / Equipment Operator
Heavy equipment operator job in Wilmington, NC
Job Description
Edwards, Inc. is a full-service industrial general contractor providing constriction, fabrication, and crane services. We are currently seeking a Shop / Equipment Operator in our Wilmington, NC office.
The Shop / Equipment Operator will be responsible for:
Completing work as assigned by the shop supervisor.
Assisting in running shop machinery and equipment (i.e., CNC laser, waterjet, press brakes, shears, milling machines, lathes, etc.)
Providing technical assistance (i.e., interpretation of drawings) as needed.
Assuming adherence to safety policies and procedures. Ensuring compliance with project procedures, safety program requirements, work rules, etc.
Perform all other additional assignments per supervisor or project manager's direction.
Ideal Candidates Should Have:
Physical requirements include, but are not limited to:
Continually walk/stand on surfaces which may be even/uneven, stable/unstable, and varying compositions.
Work in awkward spaces and/or positions including confined spaces and climbing.
The ability to routinely lift up to 75+ lbs.
Excellent hand/eye coordination, depth perception, and peripheral vision.
Essential Requirements & Skills:
Requirements
Mechanically Minded
Familiar with piping systems.
Familiar with hand and power tools.
Welding experience.
Experience with press brakes and shears.
Experience with waterjet, laser, and plasma machines.
Ability to read drawings/sketches and blueprints.
Valid Driver's License and a clean driving record.
Excellent communication skills and commitment to safety.
Additional Skills
HS Diploma or Equivalent (Preferred)
Bilingual Skills (English/Spanish) is a plus.
Competitive Benefits Package:
Health / Dental Insurance
Disability
Life Insurance
Paid Time Off: Vacation and Holiday
401(k) with company match
And more!
Working conditions may be indoor or outdoor. Schedule may include overtime, overnight, and weekend work. Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Pay commensurate with experience/knowledge.
Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify. Application may be made in person, or an application may be completed online at ************************************
Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify.
Equipment Operator II - Ivanhoe
Heavy equipment operator job in Ivanhoe, NC
Reports To: Lee Langston Seeking an individual to perform various duties at an aggregate plant facility including equipment operation, welding, and other plant-related tasks. Must be dedicated, willing to learn and wanting to build a career while achieving the highest level of safety standards.
Benefits
* Recession Resistant Industry
* Consistent work, with a work/life balance
* Overtime Opportunities
* Paid Holidays
* Paid Time Off
* 401(k) Plan w/ employer match contribution
* Medical / Dental / Vision offered the first of the month following start date
* Life Insurance - Company Paid
* Short-term / Long-term Disability Insurance - Company Paid
How to Get Started
* STEP ONE: Complete our online application (linked here)
* STEP TWO: Be prepared to speak with one of our Recruiters, as they'll be reaching out to you soon.
* STEP THREE: Keep an eye on your texts and emails, we'll use this to send you additional details, questions, and information pertaining to our hiring interview and selection process.
Get Hired: What to Expect During our Hiring Process
* Background Check
* Motor Vehicle Record Check
* DOT 5-Panel Drug Screen
* Fit for Duty Baseline Physical
* Paid Orientation
* A great team to support you throughout your career with Summit Materials companies!
Roles & Responsibilities
* Operate equipment to assist with the daily production and operations of the plant
* Assist plant supervisor with the daily operations and upkeep of the plant.
* Ability to inspect all areas of the plant to perform belt repairs, screen changes, bearing replacements and other necessary maintenance.
* Perform welding and fabrication duties as needed.
* Detect safety hazards and equipment malfunctions and respond accordingly. Ability to follow directions.
* Must be able to work evenings and weekends when necessary.
* Strict adherence to safety requirements and procedures as outlined in MSHA policies and procedures manual, and OSHA guidelines.
* Perform other job duties as assigned.
Ability, Skills & Knowledge
* Proficiency in operating a diverse range of large aggregate heavy machinery, including excavators, bulldozers, and loaders.
* Knowledge of welding and general mechanics preferred.
* Ability to adapt to evolving project requirements, operational strategies, and safety regulations, ensuring compliance with industry standards.
* Deep understanding of MSHA Regulation.
* High school education or GED equivalent.
Req #: 2246
Heavy Equipment Operator- Hampstead
Heavy equipment operator job in Hampstead, NC
At Atomic Transportation, we take pride in being a leading local bulk hauling company with a dedicated fleet of company-owned assets and W2 driver employees that specialize in waste transportation from local transfer stations to landfills. With over nineteen terminals operating locally throughout the Southeast and Midwest, at Atomic Transportation our commitment to professionalism and dedication to safety are at the core of everything we do. If you are looking for a team to grow with, Atomic Transport is hiring in the Hampstead, NC area! we are seeking a candidate that has experience operating an excavator and a backhoe equipment.
What We Can Offer:
Pay starting at: $20-$24 an hour based on experience.
Weekly Pay!
Consistent Schedule.
Paid Holidays, Vacation and orientation.
Schedule:
Monday- Friday
Every Other Saturday
Benefits:
Health, vision, and dental insurance.
Voluntary Group Policies: life insurance short/long-term disability.
401(k) Retirement Plan.
Must pass a pre-employment drug screen.
Must pass a pre-employment background check.
Must have a minimum of 2-3 years experience operating heavy equipment.
Please Call Billy Waters for more information:************
Heavy Equipment Operator - Winston-Salem, NC
Heavy equipment operator job in Wilmington, NC
Job Description
Caton Construction Group, one of the Caton Companies, corporate offices in Troy, VA, and Cary, NC, is growing! Currently seeking Equipment Operators for our bridge/roadway project in Winston-Salem, NC.
THIS JOB POSTING IS FOR OUR PROJECT IN WINSTON-SALEM, NC.
STARTING PAY is competitive and based on skills and experience.
The heavy equipment operator operates a variety of contractor equipment and properly maintains the equipment on a daily basis.
Responsibilities
• Works with and assists in moving and grading dirt, digging ditches and trenches, hoisting material, tools, equipment, and any related work with a bulldozer, backhoe, road grader or front-end loader.
• Performs routine inspection and preventive maintenance on assigned equipment and refers defects or repairs to the supervisor.
• Performs all duties in conformance to appropriate safety and security standards.
Supervisory Responsibility
This position has no supervisory responsibilities.
Position Type and Expected Hours of Work
This is a full-time position. Normal days and hours of work are Monday - Friday, 7:00 a.m. - 3:30 p.m. with time provided for lunch, hours may vary. Work may be local or out of town in which case overnight stays are required. This position frequently requires long hours and weekend work.
Travel/ Driving
Travel is primarily local during the business day, although some out-of-area and overnight travel may be expected.
Driver's license is required.
Required Education and Experience
High school diploma or equivalent.
Four years' experience involving the use of medium and heavy equipment.
Preferred Education and Experience
Valid CDL License.
Position Type and Expected Hours of Work
This is a full-time position. Normal work hours are Monday through Friday - overtime expected - 7:00 a.m. - 3:30 p.m. , with time provided for lunch, hours may vary. Work may be local or out of town in which case overnight stays are required.
Company Benefits
• Competitive Compensation Package
• Comprehensive Health, Vision and Dental Insurance
• FSA Program
• 401K Program with 4% company match
• 8 Paid Holidays plus personal floating holiday
• 80 hours of accrued Paid time Off (PTO) the first year
And more…
Why you should apply:
Excellent working environment
Working for a company that cares about your success
Working for a growing company
Employment is conditional on satisfactorily completing all pre-employment requirements including background and drug screen. Starting wages depend skills and experience.
Equal Opportunity Employer - Minorities and females are encouraged to apply.
Heavy Equipment Operator- CDL A
Heavy equipment operator job in Sandyfield, NC
Heavy Equipment Operator
ABOUT CARROLLWOOD FARMS
Carrollwood Farms is a family-owned farm in Stokes and Rockingham Counties. Our mission is to build a family farm for generations to come, showcase and preserve the best of the region, and use best practices in all that we do.
Position Overview:
Carrollwood Farms is seeking a highly motivated and experienced Heavy Equipment Operator to join our growing Sitework & Grading division. In this crucial role, you'll play a key part in developing our world-class property, operating a variety of equipment to complete large-scale grading and construction projects.
Responsibilities:
Operate a variety of heavy equipment, including skid steers, mini-excavators, off-road trucks, compactors, large excavators, and dozers.
Execute large-scale projects such as pond construction, building pad preparation, and land grading.
Perform precise excavation and hauling of dirt materials.
Install and maintain erosion control measures to safeguard the environment.
Lay pipe according to specifications.
Operate transits for accurate land measurements.
Conduct regular (at least daily) maintenance on assigned equipment.
Perform other duties as assigned by the Sitework & Grading Superintendent or Assistant Superintendent.
Other special projects as assigned.
Qualifications:
Proven ability to operate a wide range of equipment, from skid steers to large excavators and dozers.
Strong understanding of excavation, hauling, grading, and land development principles.
Experience with erosion control methods and practices is a plus.
Valid driver's license required. Class A CDL required
Commitment to safety, a positive attitude, and a strong work ethic.
Excellent communication and interpersonal skills to collaborate effectively with the team.
Ability to work independently, take initiative, and solve problems.
Physical Requirements:
Must be able to perform various physical tasks including bending, lifting, kneeling, and twisting.
Ability to occasionally lift up to 70 lbs.
Must be able to walk, sit, and stand for extended periods.
Ability to work outdoors in all weather conditions, including rain.
SALARY AND BENEFITS
Competitive, DOE.
Health insurance and 401(k) available.
The Carroll Companies is committed to fostering a diverse and inclusive workplace where all individuals are valued and respected. We believe that diversity is a source of strength and innovation, and we are dedicated to providing equal employment opportunities to all qualified candidates without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We encourage applicants from all backgrounds to apply and join us in our mission to create a workplace that reflects the diversity of the world we serve. Together, we strive to build a culture that celebrates uniqueness, embraces differences, and ensures that every employee feels empowered to bring their authentic selves to work. Your talent is what matters most, and we are excited to welcome individuals from all walks of life to contribute their skills and perspectives to our dynamic team.
Auto-ApplyPlant Loader Operator (Castle Hayne,NC/Kenansville,NC)
Heavy equipment operator job in Wilmington, NC
Barnhill Contracting Company's success is built on the values, principles and vision of the man - Robert E. Barnhill, Sr. - whose name we proudly bear. Robert Barnhill built this company on a foundational belief that there is power in people. He was a motivator. A hard worker. A leader of leaders. His passion for people and his firm belief in the Golden Rule - treating others as you want to be treated - still drive us today. We are firm, flexible and honest. We do the right thing, every single time. We empower our leaders in the field to be decision makers. We are easy to work with - a core philosophy that is both intentional and deliberate. One that requires discipline. Grit. All of these qualities, along with our founder's vision, have helped grow Barnhill Contracting Company into one of the Southeast's leading contractors.
Our success is built from the dedicated service of each and every one of our employees. Construction is hard work - long hours and immense pressure to meet critical deadlines - and we are proud to employ the most talented group of people in the industry. When you join the Barnhill team, you become part of the Barnhill Family.
Job Description:
Loader Operator will operate various types of front-end loaders such as but not limited Caterpillar or Kawasaki. May be working on multiple sites as the need arises.
Job Duties & Responsibilities:
Operates rubber tired or crawler type tractor with attached scoop type bucket on front end.
Excavates and loads excavated materials, loads materials from stockpiles, charges batch plants, and loads trucks.
May oil, grease, service, and make normal operating adjustments to equipment.
May perform other related duties such as backfilling trenches/excavations.
May require occasional lifting up to 50 pounds.
Job requires the following motions: climbing, stretching, driving/steering, sitting, twisting, vibration, riding on rough terrain.
Uses hand tools such as wrenches and screwdrivers.
May be exposed to extremes of heat and cold weather.
Overtime work may be required.
Requires riding to job sites.
The job duties described herein are not exhaustive and may be supplemented.
Minimum Qualifications & Training:
One to two years of front-end loader operations. May train the right candidate.
Ability to abide by precise instructions and strict buy necessary safety rules and policies.
Must be a reliable/trustworthy team player.
Maintain a good attendance and safety record.
Tasks Essential to Job Functions:
Occasional standing and walking required.
Ability to work long periods of time while sitting.
Ability to operate equipment at recommended speeds and peaks of operation.
Must be productive during each shift and be willing to meet the goals that are set.
Visual Activity - ability to work with equipment technology.
What We Offer:
Choice of Health Insurance options (BCBSNC)
Dental
Vision
Short Term Disability Insurance
Long Term Disability Insurance
Life Insurance
Paid Time Off
Holiday Pay
Weather Related Pay
401(k) and Profit Sharing
CareOne (EAP)
Corporate Chaplains of America
Barnhill Contracting Company is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.
Auto-ApplyAsphalt Crew Laborer/Equipment Operator
Heavy equipment operator job in Wilmington, NC
Turner Asphalt is looking for full-time team members. The construction laborer performs tasks involving physical labor at highway and heavy construction projects. The position may operate a variety of hand and power tools and may clean and prepare sites, dig trenches, set braces to support the sides of excavations, clean up rubble and debris, and remove waste materials. The position may assist other workers. Operate heavy machinery for construction, demolition, or excavation projects.
Responsibilities
1.Performs a variety of tasks involving strenuous manual labor in heavy/highway construction projects; performs manual work in preparing surfaces for paving.
2. Shovels bituminous concrete (asphalt) into construction areas.
3. Assists in patching asphalt with hot and cold mix. Excavates and fills trenches and ditches.
4. Maintains a clean job site: picks up all tools and equipment and secures job site each day to eliminate potential hazards.
5. Performs materials handling and storage.
6. Loads and unloads trucks and hauls and hoists materials.
7. Ensures that proper safety and incident reporting procedures are followed. Brings problems to the attention of the foreman, safety director or HR manager.
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Pass drug test
Drivers license perfered
Physical Requirements: (Each to have one of the following based on the position: Never, Rarely, Occasionally, Constantly)
Remaining in a stationary position, often standing or sitting for prolonged periods: Constantly
Moving about to accomplish tasks at a worksite or moving from one worksite to another: Constantly
Moving self in different positions to accomplish tasks in various environments, such as stooping, kneeling, or crouching: Constantly
Adjusting, moving and lifting objects in all directions: Constantly
Talking and hearing to communicate with others:Constantly
Seeing to perform job duties at close range, such as monitors or screens:Constantly
Seeing to perform job duties at a distance, such as driving or operating equipment:Constantly
Repeating motions that may include the wrists, hands and/or fingers: Constantly
Ascending or descending ladders, stairs, scaffolding, ramps, poles and the like: Occasionally
Operating machinery and/or power tools:Occasionally
Operating motor vehicles or heavy equipment: Occasionally
The ability to travel regionally or nationally:Constantly
Physical Demands:
Sedentary work that primarily involves sitting/standing:Constantly
Light work that includes moving objects up to 20 pounds: Occasionally
Medium work that includes moving objects up to 50 pounds:Occasionally
Heavy work that includes moving objects up to 100 pounds or more: Rarely
Working Conditions:
Low temperatures: Occasionally
High temperatures: Occasionally
Outdoor elements such as precipitation and wind: Rarely
Noisy environments: Occasionally
Hazardous conditions: Never
Shift work, to include overnight work:Occasionally
Frequent overtime, including weekends:Occasionally
Office environment:Rarely
Pave America and it's companies offers a comprehensive, competitive, and inclusive set of health, financial and other benefits that support your total well-being.
We are an Equal Opportunity Employer and comply with OFCCP regulations. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state or local law. We actively promote diversity and inclusion within our workforce. Pave America and it's companies promote a drug-free workplace. We will consider for employment qualified applicants with a criminal history in a manner consistent with the requirements of applicable laws regarding criminal background inquiries. In compliance with OFCCP requirements, we invite applicants to voluntarily self-identify their gender, race, and veteran status. Submission of this information is voluntary and refusal to provide it will not subject you to any adverse treatment.
Auto-ApplyConstruction Equipment Operator
Heavy equipment operator job in Jacksonville, NC
Job Description
Looking to kickstart your journey behind the controls of heavy machinery? Look no further! T2 Contracting, INC. in Jacksonville, NC is on the hunt for a full-time Construction Equipment Operator, and trust us, it could be your big break!
You'll earn a competitive wage of $22 to $30/hour. Plus, we've got some sweet perks, including:
Dental
Paid time off (PTO)
Growth opportunities
Health insurance
Vision
QUALIFICATIONS:
3+ years of experience
Valid driver's license with a REAL-ID star
References
GPS knowledge
Our ideal candidate will be physically fit and able to perform manual labor.
WHAT YOU'LL DO:
Your workweek will usually run from Monday to Friday, starting bright and early at 7 AM and wrapping up at 5 PM.
As a Construction Equipment Operator, you'll be the boss of heavy-duty machinery like excavators and bulldozers. Each day brings new challenges and chances to show off your skills, from checking gear to moving mountains of dirt. And guess what? Your knack for greasing up machines and laying pipes will keep things running smooth as silk.
ABOUT US
T2 Contracting, a proud veteran-owned enterprise, stands out as a devoted partner in addressing clients' civil infrastructure and commercial construction requirements. We provide honest, reliable service that stands head and shoulders above the rest. Our culture is deeply ingrained with values of adaptability, the relentless pursuit of excellence, flexibility, and a commitment to driving impactful results. With a dedicated team that embodies these values, we offer a dynamic and supportive environment for job seekers keen on making a difference in the construction industry.
If you're ready to dive into the construction game, apply now! Our initial application takes just 3 minutes. Go on, give it a shot!
Applicants may be required to pass a background check and/or drug screening to be eligible for hire.
Job Posted by ApplicantPro
Nuclear Facility Equipment Operator - CLEARED
Heavy equipment operator job in Wilmington, NC
Job DescriptionSalary:
Nuclear Facility Equipment Operator - CLEARED
Wilmington, NC
|
Global Laser Enrichment (GLE)
Full-Time | On-Site | Shift Work Required
Q-Clearance Required
At Global Laser Enrichment (GLE), we are pioneering uranium enrichment technology that will shape the future of clean energy and national security. We are seeking a Nuclear Facility Equipment Operator to support the safe and efficient operation of our enrichment systems.
Working under the direction of the Shift Supervisor, you will monitor, control, and operate facility equipment while ensuring compliance with NRC regulations and internal procedures. This role is vital to maintaining plant performance and supporting operational milestones.
Why Join GLE?
Be part of a mission-critical program with national and global impact.
Gain hands-on experience with state-of-the-art enrichment equipment.
Contribute to a culture of safety, compliance, and continuous improvement.
Competitive compensation, shift differential, and strong benefits package.
What Youll Do
Operate, monitor, and control UF6 enrichment equipment.
Start and stop plant systems as required for operations.
Monitor operating parameters and respond to alarms in compliance with facility procedures.
Record and analyze operational data, supporting engineering and safety reviews.
Perform administrative tasks including shift turnovers, logs, and reporting.
Support NRC compliance and conduct-of-operations standards.
Respond to facility transients and assist in mitigation efforts.
Support equipment maintenance and commissioning activities.
Participate in lockout/tagout procedures, corrective action programs, and procedure improvements.
Actively engage in initial and continuing training to maintain station qualifications.
What Youll Bring
Associate degree preferred, high school diploma required.
2+ years of relevant plant experience (nuclear power plant, Navy nuclear propulsion, or similar).
An active DOE/NRC Q-Clearance (or an active DOD Top Secret Clearance).
Knowledge of nuclear plant systems and health physics procedures.
Ability to troubleshoot plant equipment and generate maintenance requests.
Strong attention to detail and ability to follow procedures with accuracy.
Proficiency in technical documentation, log keeping, and data analysis.
Willingness to work off-normal shifts and extended hours as needed.
Preferred Background
Prior experience as a nuclear operator or equivalent in a highly regulated environment.
Demonstrated ability to apply human performance tools in daily operations.
Experience supporting commissioning and system modifications in industrial facilities.
Important Note
Due to the sensitive nature of our work, U.S. Citizenship and eligibility for a DOE/NRC Q-Clearance are required.
Loader Operator/Combi-Lift
Heavy equipment operator job in Rose Hill, NC
The loader Operator Combi-Lift is to maintain a steady flow of empty coups for the loading crew. Remove the empty coup from the trailer and transport into the chicken house and set down on coup black which is set in place by the loading crew. The operator is required to transport filled coups out of the chicken house and load onto the awaiting trailer.
The loader operator must successfully pass the company's Powered Industrial Truck/Operators exam by a minimum score of 80%. A new operator must be trained by a qualified operator and deemed competent by the trainer before being released to work under minimal supervision.
All safety rules will be followed, and the operator will follow the Crew Supervisor instructions. Must be a team player and get along with others. Attendance is vital and reliable transportation is a must. Shifts start on Sunday and will run thru Thursday night. Occasionally work on weekends.
Loader Operator/Combi-Lift
Heavy equipment operator job in Rose Hill, NC
The loader Operator Combi-Lift is to maintain a steady flow of empty coups for the loading crew. Remove the empty coup from the trailer and transport into the chicken house and set down on coup black which is set in place by the loading crew. The operator is required to transport filled coups out of the chicken house and load onto the awaiting trailer.
The loader operator must successfully pass the company's Powered Industrial Truck/Operators exam by a minimum score of 80%. A new operator must be trained by a qualified operator and deemed competent by the trainer before being released to work under minimal supervision.
All safety rules will be followed, and the operator will follow the Crew Supervisor instructions. Must be a team player and get along with others. Attendance is vital and reliable transportation is a must. Shifts start on Sunday and will run thru Thursday night. Occasionally work on weekends.
Heavy Equipment Operator- CDL A
Heavy equipment operator job in Sandyfield, NC
Heavy Equipment Operator
ABOUT CARROLLWOOD FARMS
Carrollwood Farms is a family-owned farm in Stokes and Rockingham Counties. Our mission is to build a family farm for generations to come, showcase and preserve the best of the region, and use best practices in all that we do.
Position Overview:
Carrollwood Farms is seeking a highly motivated and experienced Heavy Equipment Operator to join our growing Sitework & Grading division. In this crucial role, you'll play a key part in developing our world-class property, operating a variety of equipment to complete large-scale grading and construction projects.
Responsibilities:
Operate a variety of heavy equipment, including skid steers, mini-excavators, off-road trucks, compactors, large excavators, and dozers.
Execute large-scale projects such as pond construction, building pad preparation, and land grading.
Perform precise excavation and hauling of dirt materials.
Install and maintain erosion control measures to safeguard the environment.
Lay pipe according to specifications.
Operate transits for accurate land measurements.
Conduct regular (at least daily) maintenance on assigned equipment.
Perform other duties as assigned by the Sitework & Grading Superintendent or Assistant Superintendent.
Other special projects as assigned.
Qualifications:
Proven ability to operate a wide range of equipment, from skid steers to large excavators and dozers.
Strong understanding of excavation, hauling, grading, and land development principles.
Experience with erosion control methods and practices is a plus.
Valid driver's license required. Class A CDL required
Commitment to safety, a positive attitude, and a strong work ethic.
Excellent communication and interpersonal skills to collaborate effectively with the team.
Ability to work independently, take initiative, and solve problems.
Physical Requirements:
Must be able to perform various physical tasks including bending, lifting, kneeling, and twisting.
Ability to occasionally lift up to 70 lbs.
Must be able to walk, sit, and stand for extended periods.
Ability to work outdoors in all weather conditions, including rain.
SALARY AND BENEFITS
Competitive, DOE.
Health insurance and 401(k) available.
The Carroll Companies is committed to fostering a diverse and inclusive workplace where all individuals are valued and respected. We believe that diversity is a source of strength and innovation, and we are dedicated to providing equal employment opportunities to all qualified candidates without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We encourage applicants from all backgrounds to apply and join us in our mission to create a workplace that reflects the diversity of the world we serve. Together, we strive to build a culture that celebrates uniqueness, embraces differences, and ensures that every employee feels empowered to bring their authentic selves to work. Your talent is what matters most, and we are excited to welcome individuals from all walks of life to contribute their skills and perspectives to our dynamic team.
Auto-ApplyEquipment Operator : Jacksonville, NC
Heavy equipment operator job in Jacksonville, NC
The Equipment Operator operates heavy equipment of various types to remove branches and tree material from electrical lines.
ESSENTIAL FUNCTIONS
Always follow and help enforce safe practices and rules
Assist in preparing equipment and materials for each day's work at Foreperson's direction
Operate equipment as directed by Foreperson
Help maintain and repair equipment and tools used in operations
Assist other crew members in all aspects of daily activities and take a leadership role when required
Cleans up and disposes of all debris
Sets up barriers, warning signs, flags, markers, etc. to protect employees and public
Keeps informed on new equipment, specifications, standard practices, operating procedures, and customer and company employee relations policies and practices.
Track and report mileage to Foreperson
Perform duties for storm work as needed
SUPERVISORY RESPONSIBILITIES
Equipment Operators have no direct reports.
EXPERIENCE REQUIREMENTS
Prior heavy equipment operating experience in electric utility vegetation management, construction, logging, landscaping, mechanical, or military industries preferred
Must have a Valid Class A CDL
EDUCATION REQUIREMENTS
High School diploma or education equivalent preferred
KNOWLEDGE, SKILLS, AND ABILITIES
Must be knowledgeable about the daily maintenance and safe operations of all equipment used
Must possess physical strength and good balance to climb into and around mobile equipment
Must be able to enter and exit a vehicle numerous times a day
Must be able to work outdoors under varying and sometimes adverse weather conditions
Must be able to hear verbal instructions from a distance
Must be able to obtain and maintain first-aid certification and CPR
Must be able to wear necessary personal protective equipment (PPE)
Must have good vision and be attentive
Must have and maintain a Driver's License if hired for a driving position; must have and maintain a CDL and DOT Medical Card to operate any truck over 26,000 lbs.
Must be able to write, read and comprehend written and verbal job instructions/information
Must be able to maintain balance over uneven terrain
Must be able to communicate with others
Must have endurance necessary to perform duties throughout a standard eight or ten hour day
Must be able to travel out of town for storm restoration work when needed
Work authorization requirements:
Must meet I-9 requirements.
Affirmative Action/EEO statement: Xylem Tree Experts and Kendall Vegetation Services provide equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law.
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee for this job. Duties, obligations, and activities may change at any time, with or without notice.
Benefits Offered:
This is a full-time position that offers health insurance benefits for medical, vision, and dental, as well as the option for enrollment in a 401K.
Heavy Equipment Shop Technician
Heavy equipment operator job in Wilmington, NC
We're growing and looking for a talented Heavy Equipment Shop Tech to join our team! ACT Construction Equipment is committed to providing superior customer satisfaction & trustworthy service. Our customers rely on our talented and dedicated techs to provide planned maintenance, troubleshoot & repair mechanical issues and offer solutions to help keep their heavy equipment in top-notch condition. Grow your career with:
* Training (Develon, Takeuchi, Bandit, CMC, Avant & more)
* Competitive pay and benefits
* Uniforms & annual work boot allowance
* Opportunity to establish or grow your career
* Retention bonus: the longer you stay, the more we pay!
* Work with an established service team
Requirements
Ideal candidate will have experience working with construction or compact construction equipment repair and the following:
* Working knowledge of hydraulic devices and hydrostatic operating systems
* Electrical/CAN Bus troubleshooting experience
* Working knowledge of gas and diesel engines
* Comfortable using computer technology for diagnostic testing purposes
* Basic welding skills
* Auto A/C system knowledge and experience
* Good written and verbal communication skills
* Provide a high level of customer service
* Have full set of mechanics tools and basic electrical test equipment
* CDL or Class B or be eligible to achieve CDL a plus
* Must have acceptable driving record (may need to assist Road tech from time-to-time)
Heavy Equipment Shop Technician
Heavy equipment operator job in Wilmington, NC
Job DescriptionDescription:
We're growing and looking for a talented Heavy Equipment Shop Tech to join our team! ACT Construction Equipment is committed to providing superior customer satisfaction & trustworthy service. Our customers rely on our talented and dedicated techs to provide planned maintenance, troubleshoot & repair mechanical issues and offer solutions to help keep their heavy equipment in top-notch condition.
Grow your career with:
Training (Develon, Takeuchi, Bandit, CMC, Avant & more)
Competitive pay and benefits
Uniforms & annual work boot allowance
Opportunity to establish or grow your career
Retention bonus: the longer you stay, the more we pay!
Work with an established service team
Requirements:
Ideal candidate will have experience working with construction or compact construction equipment repair and the following:
Working knowledge of hydraulic devices and hydrostatic operating systems
Electrical/CAN Bus troubleshooting experience
Working knowledge of gas and diesel engines
Comfortable using computer technology for diagnostic testing purposes
Basic welding skills
Auto A/C system knowledge and experience
Good written and verbal communication skills
Provide a high level of customer service
Have full set of mechanics tools and basic electrical test equipment
CDL or Class B or be eligible to achieve CDL a plus
Must have acceptable driving record (may need to assist Road tech from time-to-time)
Heavy Equipment Operators
Heavy equipment operator job in Wilmington, NC
Job Description
POSITIONS AVAILABLE: 2
PRIMARY FUNCTION:
Operate one or several types of power construction equipment including but not limited to motor-graders, bulldozers, rubber tire backhoes or trackhoes, rollers, articulated dump truck drivers, front-end loaders or hydraulic excavators to excavate, move, and grade earth, erect structures, or pour concrete, asphalt, or other hard surface pavement on road beds, parking lots, airport runways and taxiways. May perform minor repairs and maintain equipment in addition to other duties.
ESSENTIAL DUTIES:
Fine Grade-Dozer Operator
Load and move dirt, rocks, equipment, or other materials, using trucks, power cranes, shovels, or related equipment.
Start machine, engage clutch, and push and move levers, switches, and pedals to guide machine along forms or guidelines and to control the operation of machine attachments, such as blades, buckets, scrapers, or swing booms.
Drive and maneuver equipment equipped with blades in successive passes over working areas to remove topsoil, vegetation, or rocks or to distribute and level earth or terrain.
Operate machines to spread, smooth, level, or steel-reinforce stone, concrete, or asphalt on road beds or other job sites as needed.
Operate tamping machines or manually roll surfaces to compact earth fills, foundation forms, and finished road materials, according to grade specifications.
Observe grade in order to adjust machine settings and indicate low spots for workers to add material.
Conduct documented pre-shift inspections of equipment for safety and mechanical defects.
Work long, flexible hours as demanded by our customers including nights, weekends, and work outside for extended periods during all seasons of the year.
Align machines, cutter heads, or depth gauge makers with reference stakes and guidelines or ground or position equipment, following hand signals of other workers.
Coordinate machine actions with other activities, positioning or moving loads in response to hand or audio signals from crew members.
Inspect, clean, maintain, and repair equipment, using mechanics' hand tools. Conduct pre-shift inspections and report any concerns or malfunctions to supervisors.
Learn and follow safety regulations.
Take actions to avoid potential hazards or obstructions, such as utility lines, other equipment, other workers, or falling objects.
Perform necessary work while complying with all company policies and procedures.
Perform additional duties as required or directed by their immediate supervisor or other manager.
MINIMUM REQUIREMENTS:
Education:
Must be a minimum of 18 years old.
Work Experience:
Candidate must have experience operating a bulldozer to fine grade.
Experience on multiple types of heavy equipment a plus.
Must have good work ethic and be dependable.
Must be able to work various hours as needed.
Must be willing to work out of town if needed.
Able to operate Dozer with or without GPS.
Heavy Physical Demands:
Heavy physical effort required including pulling and lifting or moving heavy weight material with frequent lifting or moving materials or equipment (over 80 pounds). If a position specific Physical Demands sheet is attached, it will describe in more detail the physical demands that are required.
Physical Activity:
Position requires the ability to continuously work around any or all of the following: noise, dust, heat, cold, oil and heavy equipment. Personal protective equipment is normally required of the position. Position requires ability to exchange ideas quickly and clearly and the ability to receive and evaluate detailed information and instructions.
The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time.
EOE. Minorities/Women/Protected Veterans/Individuals with Disabilities.
Front End Loader Operator
Heavy equipment operator job in Oak Island, NC
At Atomic Transport, we take pride in being a leading local bulk hauling company based out of Chattanooga, TN with a dedicated fleet of company-owned assets and W2 drivers. Specializing in waste transportation from local transfer stations to landfills, we operate over 25 terminals across the Southeast, Midwest and the Westcoast. We are growing and looking for passionate individuals to grow with us. We are currently seeking an experienced Front-End Loader Operator to join our team. If you're looking for stability, competitive pay, and a chance to grow with a trusted name in the industry this is your opportunity.
What We Offer:
Pay: $20-25/hour, based on experience
Weekly pay with time and a half for overtime
Regular schedule: Monday-Friday, plus Saturdays as needed
Paid holidays, vacation time, and orientation
Long-term, stable employment with career advancement potential
Responsibilities:
Conduct pre- and post-operation inspections of equipment in accordance with Company policy, ensuring windows, lights, mirrors, and rear-view cameras are clean and fully operational.
Safely and efficiently operate equipment, including excavators, front-end loaders, and other machinery, adhering to proper safety standards.
Continuously monitor waste for evidence of unacceptable materials and take appropriate action.
Regularly assess equipment condition to ensure operational readiness, minimizing downtime; clean tracks or wheels as needed.
Perform and document minor maintenance on equipment; refer complex mechanical issues to the Maintenance Shop for repair.
Complete Equipment Condition Reports and other required documentation; promptly report necessary repairs to the supervisor.
Perform daily radiator cleaning and greasing of equipment to maintain optimal performance.
Ensure all equipment is properly cleaned, serviced, and stored at the end of each shift.
Follow all Company safety policies and procedures.
Perform additional job-related duties as assigned.
Benefits:
401(k) with company match
Health, dental, and vision insurance
Health savings account (HSA)
Life and disability insurance
Paid referral program
Employee discounts
Valid driver's license
Mus have experience operating a front-end loader (Volvo L150, Volvo 300 Excavator or similar equipment) forklift does not count.
Consistent work history and reliability
Must pass a pre-employment drug screen
Must pass a pre-employment background check
Motor Grader Operator (Southport, NC)
Heavy equipment operator job in Southport, NC
Barnhill Contracting Company's success is built on the values, principles and vision of the man - Robert E. Barnhill, Sr. - whose name we proudly bear. Robert Barnhill built this company on a foundational belief that there is power in people. He was a motivator. A hard worker. A leader of leaders. His passion for people and his firm belief in the Golden Rule - treating others as you want to be treated - still drive us today. We are firm, flexible and honest. We do the right thing, every single time. We empower our leaders in the field to be decision makers. We are easy to work with - a core philosophy that is both intentional and deliberate. One that requires discipline. Grit. All of these qualities, along with our founder's vision, have helped grow Barnhill Contracting Company into one of the Southeast's leading contractors.
Our success is built from the dedicated service of each and every one of our employees. Construction is hard work - long hours and immense pressure to meet critical deadlines - and we are proud to employ the most talented group of people in the industry. When you join the Barnhill team, you become part of the Barnhill Family.
Job Description:
Operate a Caterpillar Motor Grader to perform various types of work such as but not limited to placing borrow material, maintaining haul roads, excavating and slope work. Also, perform rough grade and learn to fine grade task on sub-grade and stone base to meet NCDOT specifications.
Job Duties & Responsibilities:
Operating a motor grader at various construction sites
Must be able to perform walk around inspections of equipment before operation and at the end of shift.
Be versatile in other types of heavy equipment is a plus.
Job entails being very productive in all aspects of DOT work.
Minimum Qualifications & Training:
Experience/seeking for minimum 1 year in rough grade operation with a motor grader. Will train the candidate that shows potential in other operations and task.
Ability to understand grade stakes and a knowledge of GPS operation is a plus.
Ability to abide by strict but necessary safety rules, policies and follow instructions.
Must be a reliable/trustworthy team player.
Maintain a good attendance and safety record.
Tasks Essential to Job Functions:
Occasional standing and walking required.
Ability to work long periods of time while sitting in the operator's station.
Ability to operate equipment at recommended speeds and peaks of operation.
Must be productive during each shift and be willing to meet the goals that are set.
Visual activity - ability to develop a mental picture of the finished product and then execute the necessary skills to productively complete each required task.
What We Offer:
Choice of Health Insurance options (BCBSNC)
Dental
Vision
Short Term Disability Insurance
Long Term Disability Insurance
Life Insurance
Paid Time Off
Holiday Pay
Weather Related Pay
401(k) and Profit Sharing
CareOne (EAP)
Corporate Chaplains of America
Barnhill Contracting Company is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.
Auto-ApplyHeavy Equipment Operators
Heavy equipment operator job in Wilmington, NC
Job Description
POSITIONS AVAILABLE: 5
PRIMARY FUNCTION:
Operate one or several types of power construction equipment including but not limited to motor-graders, bulldozers, rubber tire backhoes or trackhoes, rollers, articulated dump truck drivers, front-end loaders or hydraulic excavators to excavate, move, and grade earth, erect structures, or pour concrete, asphalt, or other hard surface pavement on road beds, parking lots, airport runways and taxiways. May perform minor repairs and maintain equipment in addition to other duties.
ESSENTIAL DUTIES:
Utilities Division Heavy Equipment Operators
1.) Load and move dirt, rocks, equipment, or other materials, using trucks, power cranes, shovels, or related equipment.
2.) Start machine, engage clutch, and push and move levers, switches, and pedals to guide machine along forms or guidelines and to control the operation of machine attachments, such as blades, buckets, scrapers, or swing booms.
3.) Drive and maneuver equipment equipped with blades in successive passes over working areas to remove topsoil, vegetation, or rocks or to distribute and level earth or terrain.
4.) Operate machines to spread, smooth, level, or steel-reinforce stone, concrete, or asphalt on road beds or other job sites as needed.
5.) Operate tamping machines or manually roll surfaces to compact earth fills, foundation forms, and finished road materials, according to grade specifications.
6.) Observe grade in order to adjust machine settings and indicate low spots for workers to add material.
7.) Conduct documented pre-shift inspections of equipment for safety and mechanical defects.
8.) Work long, flexible hours as demanded by our customers including nights, weekends, and work outside for extended periods during all seasons of the year.
10.) Align machines, cutter heads, or depth gauge makers with reference stakes and guidelines or ground or position equipment, following hand signals of other workers.
11.) Coordinate machine actions with other activities, positioning or moving loads in response to hand or audio signals from crew members.
12.) Inspect, clean, maintain, and repair equipment, using mechanics' hand tools. Conduct pre-shift inspections and report any concerns or malfunctions to supervisors.
13.) Learn and follow safety regulations.
14.) Take actions to avoid potential hazards or obstructions, such as utility lines, other equipment, other workers, or falling objects.
15.) Perform necessary work while complying with all company policies and procedures.
16.) Perform additional duties as required or directed by their immediate supervisor or other manager.
17.) Must have regular and predictable attendance.
MINIMUM REQUIREMENTS:
Education:
High school diploma or GED
Must be a minimum of 18 years old.
Work Experience:
Must be able to operate multiple pieces of equipment.
Must be willing to use hand tools while not operating equipment.
Minimum of 3 years' operating and utility work experience.
Must have a good work ethic and work as a team player; including operating different types of equipment and general labor work if needed.
SPECAL QUALIFICATIONS:
Experience pulling trench boxes and sloping excavations.
Heavy Physical Demands:
Heavy physical effort required including pulling and lifting or moving heavy weight material with frequent lifting or moving materials or equipment (over 80 pounds). If a position specific Physical Demands sheet is attached, it will describe in more detail the physical demands that are required.
Physical Activity:
Position requires the ability to continuously work around any or all of the following: noise, dust, heat, cold, oil and heavy equipment. Personal protective equipment is normally required of the position. Position requires ability to exchange ideas quickly and clearly and the ability to receive and evaluate detailed information and instructions.
The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time.
EOE. Minorities/Women/Protected Veterans/Individuals with Disabilities.