Manufacturing Engineer jobs at Hexcel - 400 jobs

Job Title: Mechanical Engineer IV Zip Code: 01581 Duration:12 Months Pay Rate: $ 66.58 /hr Keyword's: #Westborojobs; #Engineerjobs. Key job responsibilities: * Collaborate with cross-functional engineers to design and execute packaging machinery and automation projects * Lead the mechanical design workstreams encompassing the core system evolution, structural member design including the modular frame, safety/guarding, and incorporation ancillary systems at the project / platform level while ensuring the technical, cost and timeline objectives are achieved * Deliver engineering workstreams including drive system modeling, load and bearing calculations, static and dynamic torque simulations and analysis, 3D and 2D model design including the mechanical BOM generation * Execute the detailed design evolution of modules and subsystems for material specifications, geographic requirements and continuous improvement goals aligned with * MSP"s platform and project level initiatives * Partner with the Electrical Engineering, ensure project documentation is complete and scalable for electrical schematics, BOM, I/O"s and subsystem programs Qualifications: * Experience in developing functional specifications, design verification plans and functional test procedures * Experience working with interdisciplinary teams to execute product design from concept to production * BS in Mechanical or Mechatronics Engineering * 8+ years of design experience for industrial automation * Design of custom mechanical components * Integration of sensors, actuators, and controls hardware with automated machinery Proficiency in 3D design and simulation software including but not limited to Ansys, Creo, Catia, Solidworks Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, colour, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

Job Title: Design Engineer II Zip Code: 06801 Duration: 12 Months Pay Rate: $60.22/hr. Keyword's: #Betheljobs; #DesignEngineerjobs; As a Design Engineer II, you will play a critical role in the product development process, contributing to the design and engineering of new products or systems. You will leverage your expertise to develop innovative solutions, conduct analysis and testing, and collaborate with cross-functional teams to bring designs from concept to production. Functions: ⦁ Lead the design and development of new products or systems, from concept to production. ⦁ Utilize CAD software to create detailed drawings and models of components and assemblies. ⦁ Conduct engineering analysis, including finite element analysis (FEA), tolerance analysis, and simulation. ⦁ Collaborate with cross-functional teams, including product management, manufacturing, and quality assurance, to ensure design requirements are met. ⦁ Participate in design reviews and provide technical guidance and support to junior engineers and technicians. ⦁ Identify and resolve design issues and challenges through troubleshooting and iterative testing. ⦁ Ensure designs comply with industry standards, regulations, and best practices. Required Qualifications: ⦁ Bachelor's degree in Mechanical Engineering, Electrical Engineering, or related field. ⦁ 3-6 years of experience in product design, engineering, or a related role. ⦁ Proficiency in CAD software (e.g., SolidWorks, AutoCAD, Creo). Strong understanding of engineering principles and design fundamentals. ⦁ Experience with engineering analysis tools and techniques. ⦁ Excellent problem-solving skills and attention to detail. ⦁ Ability to work effectively in a team environment and collaborate with cross-functional teams. Preferred Skills: ⦁ Master's degree in Engineering or related field. ⦁ Experience with product lifecycle management (PLM) software. ⦁ Familiarity with design for manufacturability (DFM) and design for assembly (DFA) principles. ⦁ Knowledge of relevant industry standards and regulations. ⦁ Experience with rapid prototyping and additive manufacturing technologies.

#NowHiring #OpticalEngineer Job Title: Mechanical Engineer V / Optical Engineer Contract: 12+ Months is offering a hourly rate range from $80 - $85 an hour. Belcan is a leading provider of professional IT, Engineering, Workforce Solutions and staffing in the United States, Canada, UK, Europe, and India. A Optical Engineer V Job in Redmond, WA is currently available through Belcan. In this role you will be comfortable with designing camera/optical systems of all types, understanding critical optical technologies such as lens specification, aberrations, calibration, color balance, aperture, exposure, gain, motion-induced blur, lighting, etc. If you are interested in this role, Apply Today! Job Description: Client is seeking a seasoned sensor design engineer to conceive, develop, prototype and deploy data-collection systems at scale. These systems will collect information about Client's products which will be used by machine learning/machine vision systems to guide robotic manipulation of objects, among other applications. These data collection systems will be installed into various facilities across the Client network to capture the types and quantity of data needed to automate processes. Our team collaborates machine learning scientists, fulfillment associates, labeling teams, field engineering and maintenance personnel and with a variety of customers across Client worldwide. The ideal individual will be comfortable with designing camera/optical systems of all types, understanding critical optical technologies such as lens specification, aberrations, calibration, color balance, aperture, exposure, gain, motion-induced blur, lighting, etc. Experience exploring other active and passive sensing modalities such as structured light, stereo, lidar, radar, x-ray, infrared, RFID is a plus. Experience with industrial measurement such as bar-code extraction, text extraction, dimensioning, and weight, in a manufacturing environment that includes automated conveyance and related safety controls. You should be comfortable engaging with all types of customers ranging from executives to developers, and warehouse operations staff. You should be comfortable working in a fast-paced environment where delivery time for new products and features is typically measured in months. You are a self-starter with a commitment to team work, who enjoys working with complex hardware and software systems, is customer centric, and thrives on the challenge of helping scientists as well as non-technical customers to achieve their goals. ROLE ALIGNS MORE WITH HARDWARE DEVELOPMENT ENGINEER OR OPTICAL ENGINEER Qualifications: * BS degree in electrical engineering, optics or vision systems * 5 years' experience in Hardware development such as developing digital optical / machine vision systems for industrial applications * Strong interest and ability to learn customer requirements in the data collection space. * Excellent oral and written communication skills * Ability to develop data collection software (sensor interface) for experimental/prototyping purpose. * Ability to design, acquire and prototype sensing systems Preferred qualifications * MS or PhD in electrical engineering, optics or vision systems * Experience with multi-sensor systems, experience with non-optical sensing systems * Familiarity with computer vision/machine learning Location: Redmond, WA Zip Code: 98004 Keyword"s: #Bellevuejobs; #MechanicalEngineerjobs; Start Date: Right Away #ZR If you are interested in this role, please apply via the apply now link provided. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract, temporary, temp-to-hire, and direct assignments. We are the employer of choice for thousands worldwide. For more information, please visit our website at Belcan.com

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA), Electrical Systems Responsibility Center is seeking First-Line Manufacturing Managers (Level K) to join our 777X CI&R team in Everett, Washington, on 2nd shift. Position Responsibilities: Leads by demonstrating and holding all accountable to the Boeing Values and Behaviors Leads by promoting employee engagement and builds on organizational culture that fosters safety and quality performance, improves employee satisfaction and retains a skilled and motivated workforce Leads employees performing activities incorporating change into electrical assemblies and wire bundles Develops and maintain relationships and partnerships with customers, stakeholders, peers and partners across shifts Develop and maintains relationships with direct reports and supports their growth Understanding of electrical build processes Understanding of change implementation on electrical commodities Basic Qualifications (Required Skills/Experience): 3+ years of experience in manufacturing environment 3+ years of experience leading or managing others Ability to work 2nd shift, including weekends and overtime Preferred Qualifications (Desired Skills/Experience): 3+ Years of experience in a Manufacturing Environment with Electrical Process Assembly Knowledge 3+ Years of experience navigating BAC Specifications and Documents 1+ years of experience with Quality Management System and/or One Boeing Production System (One BPS) 1+ years of experience using Microsoft Office tools (Word, Excel, Outlook, PowerPoint) Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Total Rewards: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: $119,000 - $145,000 Applications for this position will be accepted until Jan. 21, 2026 Export Control Requirements: This is not an Export Control position. Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 2nd shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is seeking a safety and quality minded First Line Manufacturing Managers (Level K) to join our 737 North Line Team in Everett, Washington on 1st and 2nd Shift. We are seeking a dynamic and inspiring candidate who possesses exceptional interpersonal and coaching skills to help us cultivate the culture we desire through our Boeing Values & Behaviors within our business unit. You will play a pivotal role in ensuring we are taking care of our people while delivering on our deliverables: People, Safety, Quality, Compliance, Delivery, and Cost while using the Boeing Production System (BPS) standards. The ideal candidate will have the ability to understand and maneuver through a complex challenges, leveraging connections to drive success. In our Manufacturing team, we are looking for leaders who are dedicated to the success of their team members by prioritizing a first-pass quality approach while keeping our team and airplane safe. Our commitment to producing FOD-free products and maintaining a "Clean as You Go" philosophy is non-negotiable, reflecting our unwavering dedication to our standards, our people, and our customers. If you thrive in a fast-paced environment and adaptable to changes as well as having a passion for guiding others through change, we want to hear from you! Join us in making a meaningful impact! This position is expected to be 100% onsite. The selected candidate will be required to work onsite in Renton (in the initial stages) and then in Everett. Position Responsibilities: Leads by demonstrating and holding all accountable to the Boeing Values and Behaviors. Coaches, develops and motivates employees. Manages employees performing activities in multiple manufacturing disciplines. Develops and executes business plans, policies and procedures and develops organizational and technical strategies. Acquires resources, provides technical management of suppliers and leads process improvements. Develops and maintains relationships and partnerships with customers, stakeholders, peers, partners and direct reports. Provides oversight and approval of technical approaches, products and processes. Basic Qualifications (Required Skills/Experience): 3+ years of experience in aerospace or manufacturing 1+ years of experience improving processes using Lean manufacturing and/or continuous improvement techniques 1+ years of experience in leadership either formally or informally leading teams in a cross-functional environment Ability to work any shift assigned, including overtime and weekends Preferred Qualifications (Education/Experience): 3+ years of experience in a management role Shift: Candidate may be selected for 1st or 2nd Shift. The assigned shift will be determined at the time of offer. There may be additional shift requirements to support program objectives. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Total Rewards: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $126,000 - $154,000 Applications for this position will be accepted until Feb. 23, 2026 Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

This organization partners with some of the most recognized brands in the life sciences industry to address complex business needs. Its mission is to drive growth and innovation within the scientific community, supporting researchers, organizations, and companies in solving critical healthcare challenges. The team delivers innovative solutions and services that enable informed decision-making, backed by significant investment in people and capabilities. Growth is fueled by exceptional professionals who thrive in collaborative environments and share a commitment to improving lives. These dedicated experts make an impact every day. Culture & Values Empower and support colleagues Commit to client success at every turn Demonstrate courage to do the right thing Foster an inclusive environment where team members feel respected, engaged, and challenged Continuously acquire new skills and learn from experiences to enhance collective expertise Lead Process Engineer Responsibilities Provide technical leadership for CIP/SIP processes, ensuring safe, efficient, and cGMP-compliant operations Lead or support process improvement and scale-up initiatives Conduct investigations, identify root causes, and implement corrective/preventive actions for manufacturing issues Develop and optimize process parameters to ensure consistent product quality and yield Prepare and review process documentation, including batch records, SOPs, validation protocols/reports, and change control documents Collaborate with cross-functional teams (R&D, Quality, Validation, Maintenance, Production) for technology transfer and process validation Support equipment qualification and process validation for new or modified equipment/processes Analyze production data, generate reports, and recommend improvements to enhance performance and efficiency Ensure compliance with all safety and regulatory requirements in the manufacturing environment Requirements Bachelor's degree or equivalent (STEM preferred; Biomedical or Chemical Engineering ideal) 7-10 years of relevant validation experience in pharma/biologics Minimum 5 years of cleaning validation experience, including: Hands-on experience with rinse and swab sampling and visual inspections Development of CIP and SIP cycles for process piping, transfer panels, and bioreactors Creation of load patterns for autoclaves and parts/glass washers Experience with Delta V automation for CIP/SIP Execution of Riboflavin studies Familiarity with Ellab ValSuite Pro and ValGenesis systems preferred Ability to work on-site full-time in Devens, MA Compensation National (US) Range: $85,000 - $150,000 USD Actual salary depends on factors such as experience, training, location, and market conditions. Benefits High growth potential in a fast-paced, people-focused organization Competitive pay plus performance-based incentives Company-paid life, short-term, and long-term disability insurance Medical, dental, and vision coverage FSA, DCARE, commuter benefits Supplemental life, hospital, critical illness, and legal insurance Health savings account 401(k) retirement plan with employer match Paid time off (with rollover option) and holidays Sick time as needed Tuition reimbursement Team social activities Employee recognition and referral programs Paid parental leave and bereavement

Job Title: Manufacturing Engineer, Machine Shop Company: Custom Control Sensors, LLC Employee Type: Full Time Exempt Industry: Manufacturing Job Type: Assembly Manufacturing Engineering Required Education: Bachelor of Science Degree or equivalent, in mechanical or manufacturing engineering. Master's preferred for Senior role. Required Experience: Level 1 - A related technical field with 0-2 years of related experience. Lean / Six Sigma certification desired. Must be computer proficient Level 2 - A related technical field with 2-5 years of related experience. Lean / Six Sigma certification desired. Must be computer proficient Senior - A related technical field with 5-10+ years of related experience. Lean / Six Sigma certification desired. Summary of Focus: Level 1 - Supporting processes, documentation, basic troubleshooting Level 2 - Process ownership, improvement, DFM, RCASenior - Strategy, NPI, compliance, mentorship Key Technical Areas: Level 1 - Soldering, leak testing, pressure calibration basics Level 2 - PFMEA, SPC, signal integrity, fixture design Senior - Automation, compliance leadership, complex root cause Company Overview Custom Control Sensors, LLC (CCS) is a global leader in the design, development, manufacturing and supply of pressure, temperature and liquid flow switches and sensors for the Aerospace, Defense and Industrial markets. Since 1957, CCS has been providing high reliability electro-mechanical devices that utilize the "DUAL-SNAP" action disc spring principle pioneered by Custom Control Sensors. CCS Airborne Division provides standard and custom switches, sensors and transducers to the aerospace, defense, commercial aviation and government markets. CCS also supplies original PMA parts for various Boeing, Airbus and business aviation aircraft. CCS Industrial Division provides pressure and temperature switches, sensors and transmitters for process control of global oil & gas, petro-chemical, power generation, steel manufacturing, tire manufacturing, automotive, medical and various other industrial equipment. CCS is an ISO 9001and AS 9100 certified company. Industrial Product certifications include UL, CSA, ATEX, GOST, CCC and IECEx. CCS is a growth-orientated company focused on building an energetic and vibrant work environment. We work to foster the interaction and collaboration between all associates at CCS, the connection with our customers and the opportunity for creativity. CCS is an established company with global resources offering individual opportunities to affect positive change. One person can make a great impact on our companys success. Benefits: Medical Dental 401k with Match Employer funded Life Insurance, Short-term Disability, and Long-term Disability Paid Sick and Vacation Leave 9 Paid Holidays Job Description: Level 1 - Assist in supporting production and process improvements for aerospace-grade pressure switches and transducers. Gain hands-on experience with precision assembly, calibration, and inspection processes under the guidance of senior engineers. Level 2 - Own and optimize manufacturing processes for aerospace pressure switches and transducers. Improve yields, throughput, and quality through data-driven analysis and process refinement. Support new designs through development to production. Senior - Lead manufacturing strategy and process improvement initiatives for aerospace-qualified pressure switches and transducers. Serve as technical authority for assembly, calibration, and test processes. Drive productivity, quality, and regulatory compliance. Key Responsibilities: Level 1 Support day-to-day manufacturing of pressure sensors, switches, and assemblies. Assist with documentation of assembly procedures, calibration steps, and inspection protocols. Help troubleshoot basic production issues, focusing on wiring, sensor alignment, and leak testing. Collect and analyze simple manufacturing data (e.g., yields, rework rates). Assist with implementation of lean improvements in work cells. Learn industry standards (AS9100, IPC-A-610, etc.) and support compliance. Maintain accurate documentation of processes, manufacturing procedures, material records, design concepts, tool/fixture drawings and shop orders in coordination with Engineering, Quality Assurance and R & D functions Level 2 Develop and optimize assembly and calibration processes for electro-mechanical pressure sensors. Analyze failure data and lead root cause investigations (e.g., electrical drift, seal leaks, calibration drift). Implement process controls (PFMEAs, control plans, work instructions). Support NPIs and design-for-manufacturability (DFM) efforts for custom transducer designs. Collaborate with quality engineering on nonconformance investigations and corrective actions. Evaluate tooling and test fixture needs and manage change control documentation. Ensure compliance with AS9100, FAA, and NADCAP standards as applicable. Maintain accurate documentation of processes, manufacturing procedures, material records, design concepts, tool/fixture drawings and shop orders in coordination with Engineering, Quality Assurance and R & D functions Senior Lead new product introduction (NPI) for complex pressure sensing and switching devices, from prototype through production ramp. Develop robust, repeatable processes for soldering, calibration, testing, and potting. Responsible for creating Assembly and Manufacturing Travelers and Standard Work Instructions; Maintain accurate documentation of processes, manufacturing procedures, material records, design concepts, tool/fixture drawings and shop orders in coordination with Engineering, Quality Assurance and R & D functions Design or oversee creation of custom tooling, test stands, and automated calibration fixtures. Drive cost reduction, yield improvement, and reliability enhancements. Collaborate with design, quality, and test engineering to ensure manufacturability and compliance. Lead internal audits, support external regulatory audits (FAA, customers), and maintain AS9100 documentation. Mentor junior engineers and provide technical leadership across manufacturing and test teams. Interface with suppliers to troubleshoot component issues (e.g., pressure elements, seals, PCBs). General Skills and Requirements: Due to need to maintain ITAR compliance, applicants must be U.S. citizen or legal permanent resident. Bachelor of Science Degree or equivalent, in mechanical or manufacturing engineering. Master's preferred for Senior role. Must be Continuous improvement focused Team oriented and possesses flexibility and adaptability Ability to read, write, and follow written and verbal instruction in English Ability to work well with only a modest amount of instructions & directions Ability to sit for prolonged periods in front of a computer as necessary Ability to speak Spanish will be a plus Level 1 Exposure to electronics, precision assembly, or sensor technology is a plus. Familiar with pneumatics, pneumatic gages and production high pressure lines & pneumatic test boxes and manufacturing tools for assembly is a plus Familiarity with CAD and basic data analysis (Excel, Minitab). Detail-oriented, with a desire to learn aerospace manufacturing standards and processes. Familiarity with lean manufacturing methodologies, 6 S, Six Sigma tools, RCCA, PFMEA, DFM, and Kaizen events Familiarity with SolidWorks or a similar high-end CAD software, and good working knowledge of GD&T as per ASME Y14.5 is a plus Support company goals, objectives, policies, procedures, good manufacturing practices, and regulations Level 2 25 years of experience with electro-mechanical assembly, sensor calibration, or aerospace components. Familiarity with leak testing, signal conditioning, and pressure calibration equipment. Proficiency in root cause analysis and lean manufacturing tools. Experience with ERP/MRP systems and controlled documentation processes. Knowledge of lean manufacturing methodologies, Six Sigma tools, RCCA, PFMEA, DFM, and Kaizen events Support company goals, objectives, policies, procedures, good manufacturing practices, and regulations Experienced in pneumatics, pneumatic gages and production high pressure lines & pneumatic test boxes and manufacturing tools for assembly. Experienced in installation and/or removal of production line equipment Experienced in designing/Updating new production tools to replace old and obsolete ones in production Experienced in 6S concept and able to train & implement the concept on the production stations and tool cabinets storages Senior 510+ years in aerospace manufacturing of sensors, transducers, or similar precision electromechanical products. Expert knowledge of pressure calibration, leak testing, electronics assembly, and sensor physics. Strong understanding of aerospace regulatory requirements (AS9100, FAA PMA/TSO, IPC standards). Proficiency with ERP systems, statistical tools (Minitab, JMP), and quality documentation systems. Proficiency with SolidWorks or a similar high-end CAD software, and good working knowledge of GD&T as per ASME Y14.5 Knowledge of lean manufacturing methodologies, Six Sigma tools, RCCA, PFMEA, DFM, and Kaizen events Support company goals, objectives, policies, procedures, good manufacturing practices, and regulations Experienced in training employees on methods, tooling, and procedures for product assembly or fabrication Experienced in pneumatics, pneumatic gages and production high pressure lines & pneumatic test boxes and manufacturing tools for assembly. Experienced in installation and/or removal of production line equipment Experienced in designing/Updating new production tools to replace old and obsolete ones in production Experienced in 6S concept and able to train & implement the concept on the production stations and tool cabinets storages Physical Requirements: The physical demand described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit, talk or hear, flex/extend fingers with opposition of thumb; palmar grasp. The employee is frequently required to stand, walk, bend, and reach with hands and arms and to move within all areas of the facilities and parking lots. The employee is occasionally required to bend, turn push, pull and kneel. A computer is used to access, input and retrieve data. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision, depth perception and the ability to adjust and focus. EEO M/F/D/V Custom Control Sensors, LLC. is an Equal Opportunity employer. All qualified applicants for employment shall receive fair and equal treatment regardless of their race (including hair texture and protective hairstyles, such as braids, locks, and twists), color, religion, creed, sex/gender, marital or registered domestic partnership status, age, national origin or ancestry, citizenship, pregnancy, childbirth, breastfeeding or related medical conditions, mental or physical disability (including HIV and AIDS), medical condition including genetic information or characteristics (including those of family members), sexual orientation, veteran or military status, gender identity, gender expression, transgender status or any other basis protected by federal, state or local law, ordinance or regulation. The policy not to discriminate includes, but is not limited to, advertising for positions, recruiting, hiring, placement, promotion, transfer, rates of pay, discipline and termination. No recruiters or recruitment agencies. Compensation details: 75000-120000 Yearly Salary PIb0342a1f9362-31181-38302908

Tucson, AZ World View is on a mission to inspire, create, and explore new perspectives for a radically improved future by helping humanity respect and conserve all life on Earth. As a leader in the burgeoning stratospheric exploration space, we have been leading groundbreaking stratospheric flight for over 10 years. Using advanced stratospheric balloon technology, our stratospheric remote sensing capabilities are trusted by NASA, NOAA and other government and commercial enterprises. And, with our space tourism and exploration business promising a truly unique space tourism experience unlike anything else on the market, World View is poised for massive growth. To learn more about World View, visit ******************** You will be responsible for designing and implementing a manufacturing system consisting of electrical, mechanical, soft good fabrication, assembly, system integration, validation and refurbishment activities. This position requires someone who is dynamic, driven, organized and detail oriented; excels in project management; communicates with ease at all levels; thrives in ambiguous environments and is adept at facilitating actions and resolving conflicts. As a member of the Integrated Product Team, you will be a key voice for manufacturing and supply chain in developing the next generation platforms. Role Responsibilities * Monitors and evaluates production methods to ensure adherence to product specifications and requirements. * Works closely with manufacturing personnel to identify cost reduction opportunities and address production issues. * Designs and develops new machinery, methods or tooling to improve processes and procedures. * Identifies and interfaces with external industry SME's and suppliers to select machine components and tools to ensure cost effective solutions. * Manages the introduction and implementation of new machinery and production processes. * Ensures that equipment and new machinery meet all applicable safety standards. * Provides training and work instructions for new equipment and processes. * Builds, wires, programs, debugs, maintains, and troubleshoots equipment and machinery as needed. * Resolves technical problems that impact manufacturing performance, costs or scheduling. * Improves and optimizes product flow by analyzing and planning workflow, space requirements, workspace ergonomics, and equipment layout. * Participates in design reviews and acts as a liaison between design engineering and manufacturing. * Reviews engineering drawings for manufacturability and provides manufacturing approval for drawing release. * Interfaces with engineering and quality personnel to develop test methods and establish standards to confirm manufacturing processes. * Assists with QA studies and validations on production lines as needed. * Provides manufacturing decision-making information through data collection; calculating production, labor, and material costs; reviewing production schedules; estimating future requirements. * Prepares product and process reports by collecting, analyzing, and summarizing information and trends in cooperation with Quality Engineering. * Maintains product and process database using appropriate software to enter and analyze data. * Positively reinforces and supports company policies, procedures and work practices. * Maintains product and company reputation by complying with government regulations. * Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies. Qualifications * BS/BA in related field * A minimum of 3 years of manufacturing automation experience * Machine control design and PLC programming experience is required * 3D CAD modeling skills are required, SolidWorks experience is preferred * Proficiency in conceptual in-line planning and standing up new automated assembly lines * Hands on experience with automation of textile or plastic manufacturing * Strong working knowledge of power subsystems and converter design and operation is highly desirable * Excellent communication skills, both written and verbal * Ability to work in a fast-paced cross-functional environment, make quality decisions, and meet challenging deadlines Bonus Points * Advanced degree in relevant field is a plus * Experience writing procedures and work instructions * 10+ years of manufacturing, fabrication, assembly, or test engineering experience with responsibilities including resource management, schedule management, budget responsibility, supplier selection, and multidisciplinary team involvement * Solar and Lithium battery charger design experience is a plus * Knowledge in soft goods, patterning and heat-sealing methods for thermoplastics is a plus * AutoCAD experience is a plus * Knowledge and experience in Lean Manufacturing, 6-Sigma, DMAIC process is a plus What We Offer * Work alongside experts in emerging technology * Full benefits including Medical, Dental, Vision, Life Insurance, etc. * Modern office with kitchen, exercise area, amazing views, and more! Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. World View is an Equal Opportunity Employer. This company does not discriminate in employment and personnel practices based on race, sex, age, handicap, religion, national origin or any other basis prohibited by applicable law. Hiring, transferring and promotion practices are performed without regard to the above listed items. $90,000 - $125,000 a year We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Title: Manufacturing Engineer, Machine Shop Company: Custom Control Sensors, LLC Employee Type: Full Time - Exempt Industry: Manufacturing Job Type: Assembly Manufacturing Engineering Required Education: Bachelor of Science Degree or equivalent, in mechanical or manufacturing engineering. Master's preferred for Senior role. Required Experience: Level 1 - A related technical field with 0-2 years of related experience. Lean / Six Sigma certification desired. Must be computer proficient Level 2 - A related technical field with 2-5 years of related experience. Lean / Six Sigma certification desired. Must be computer proficient Senior - A related technical field with 5-10+ years of related experience. Lean / Six Sigma certification desired. Summary of Focus: Level 1 - Supporting processes, documentation, basic troubleshooting Level 2 - Process ownership, improvement, DFM, RCA Senior - Strategy, NPI, compliance, mentorship Key Technical Areas: Level 1 - Soldering, leak testing, pressure calibration basics Level 2 - PFMEA, SPC, signal integrity, fixture design Senior - Automation, compliance leadership, complex root cause Company Overview Custom Control Sensors, LLC (CCS) is a global leader in the design, development, manufacturing and supply of pressure, temperature and liquid flow switches and sensors for the Aerospace, Defense and Industrial markets. Since 1957, CCS has been providing high reliability electro-mechanical devices that utilize the "DUAL-SNAP" action disc spring principle pioneered by Custom Control Sensors. CCS' Airborne Division provides standard and custom switches, sensors and transducers to the aerospace, defense, commercial aviation and government markets. CCS also supplies original PMA parts for various Boeing, Airbus and business aviation aircraft. CCS' Industrial Division provides pressure and temperature switches, sensors and transmitters for process control of global oil & gas, petro-chemical, power generation, steel manufacturing, tire manufacturing, automotive, medical and various other industrial equipment. CCS is an ISO 9001and AS 9100 certified company. Industrial Product certifications include UL, CSA, ATEX, GOST, CCC and IECEx. CCS is a growth-orientated company focused on building an energetic and vibrant work environment. We work to foster the interaction and collaboration between all associates at CCS, the connection with our customers and the opportunity for creativity. CCS is an established company with global resources offering individual opportunities to affect positive change. One person can make a great impact on our company's success. Benefits: Medical Dental 401k with Match Employer funded Life Insurance, Short-term Disability, and Long-term Disability Paid Sick and Vacation Leave 9 Paid Holidays Job Description: Level 1 - Assist in supporting production and process improvements for aerospace-grade pressure switches and transducers. Gain hands-on experience with precision assembly, calibration, and inspection processes under the guidance of senior engineers. Level 2 - Own and optimize manufacturing processes for aerospace pressure switches and transducers. Improve yields, throughput, and quality through data-driven analysis and process refinement. Support new designs through development to production. Senior - Lead manufacturing strategy and process improvement initiatives for aerospace-qualified pressure switches and transducers. Serve as technical authority for assembly, calibration, and test processes. Drive productivity, quality, and regulatory compliance. Key Responsibilities: Level 1 Support day-to-day manufacturing of pressure sensors, switches, and assemblies. Assist with documentation of assembly procedures, calibration steps, and inspection protocols. Help troubleshoot basic production issues, focusing on wiring, sensor alignment, and leak testing. Collect and analyze simple manufacturing data (e.g., yields, rework rates). Assist with implementation of lean improvements in work cells. Learn industry standards (AS9100, IPC-A-610, etc.) and support compliance. Maintain accurate documentation of processes, manufacturing procedures, material records, design concepts, tool/fixture drawings and shop orders in coordination with Engineering, Quality Assurance and R & D functions Level 2 Develop and optimize assembly and calibration processes for electro-mechanical pressure sensors. Analyze failure data and lead root cause investigations (e.g., electrical drift, seal leaks, calibration drift). Implement process controls (PFMEAs, control plans, work instructions). Support NPIs and design-for-manufacturability (DFM) efforts for custom transducer designs. Collaborate with quality engineering on nonconformance investigations and corrective actions. Evaluate tooling and test fixture needs and manage change control documentation. Ensure compliance with AS9100, FAA, and NADCAP standards as applicable. Maintain accurate documentation of processes, manufacturing procedures, material records, design concepts, tool/fixture drawings and shop orders in coordination with Engineering, Quality Assurance and R & D functions Senior Lead new product introduction (NPI) for complex pressure sensing and switching devices, from prototype through production ramp. Develop robust, repeatable processes for soldering, calibration, testing, and potting. Responsible for creating Assembly and Manufacturing Travelers and Standard Work Instructions; Maintain accurate documentation of processes, manufacturing procedures, material records, design concepts, tool/fixture drawings and shop orders in coordination with Engineering, Quality Assurance and R & D functions Design or oversee creation of custom tooling, test stands, and automated calibration fixtures. Drive cost reduction, yield improvement, and reliability enhancements. Collaborate with design, quality, and test engineering to ensure manufacturability and compliance. Lead internal audits, support external regulatory audits (FAA, customers), and maintain AS9100 documentation. Mentor junior engineers and provide technical leadership across manufacturing and test teams. Interface with suppliers to troubleshoot component issues (e.g., pressure elements, seals, PCBs). General Skills and Requirements: Due to need to maintain ITAR compliance, applicants must be U.S. citizen or legal permanent resident. Bachelor of Science Degree or equivalent, in mechanical or manufacturing engineering. Master's preferred for Senior role. Must be Continuous improvement focused Team oriented and possesses flexibility and adaptability Ability to read, write, and follow written and verbal instruction in English Ability to work well with only a modest amount of instructions & directions Ability to sit for prolonged periods in front of a computer as necessary Ability to speak Spanish will be a plus Level 1 Exposure to electronics, precision assembly, or sensor technology is a plus. Familiar with pneumatics, pneumatic gages and production high pressure lines & pneumatic test boxes and manufacturing tools for assembly is a plus Familiarity with CAD and basic data analysis (Excel, Minitab). Detail-oriented, with a desire to learn aerospace manufacturing standards and processes. Familiarity with lean manufacturing methodologies, 6 S, Six Sigma tools, RCCA, PFMEA, DFM, and Kaizen events Familiarity with SolidWorks or a similar high-end CAD software, and good working knowledge of GD&T as per ASME Y14.5 is a plus Support company goals, objectives, policies, procedures, good manufacturing practices, and regulations Level 2 2-5 years of experience with electro-mechanical assembly, sensor calibration, or aerospace components. Familiarity with leak testing, signal conditioning, and pressure calibration equipment. Proficiency in root cause analysis and lean manufacturing tools. Experience with ERP/MRP systems and controlled documentation processes. Knowledge of lean manufacturing methodologies, Six Sigma tools, RCCA, PFMEA, DFM, and Kaizen events Support company goals, objectives, policies, procedures, good manufacturing practices, and regulations Experienced in pneumatics, pneumatic gages and production high pressure lines & pneumatic test boxes and manufacturing tools for assembly. Experienced in installation and/or removal of production line equipment Experienced in designing/Updating new production tools to replace old and obsolete ones in production Experienced in 6S concept and able to train & implement the concept on the production stations and tool cabinets storages Senior 5-10+ years in aerospace manufacturing of sensors, transducers, or similar precision electromechanical products. Expert knowledge of pressure calibration, leak testing, electronics assembly, and sensor physics. Strong understanding of aerospace regulatory requirements (AS9100, FAA PMA/TSO, IPC standards). Proficiency with ERP systems, statistical tools (Minitab, JMP), and quality documentation systems. Proficiency with SolidWorks or a similar high-end CAD software, and good working knowledge of GD&T as per ASME Y14.5 Knowledge of lean manufacturing methodologies, Six Sigma tools, RCCA, PFMEA, DFM, and Kaizen events Support company goals, objectives, policies, procedures, good manufacturing practices, and regulations Experienced in training employees on methods, tooling, and procedures for product assembly or fabrication Experienced in pneumatics, pneumatic gages and production high pressure lines & pneumatic test boxes and manufacturing tools for assembly. Experienced in installation and/or removal of production line equipment Experienced in designing/Updating new production tools to replace old and obsolete ones in production Experienced in 6S concept and able to train & implement the concept on the production stations and tool cabinets storages Physical Requirements: The physical demand described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit, talk or hear, flex/extend fingers with opposition of thumb; palmar grasp. The employee is frequently required to stand, walk, bend, and reach with hands and arms and to move within all areas of the facilities and parking lots. The employee is occasionally required to bend, turn push, pull and kneel. A computer is used to access, input and retrieve data. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision, depth perception and the ability to adjust and focus. EEO M/F/D/V Custom Control Sensors, LLC. is an Equal Opportunity employer. All qualified applicants for employment shall receive fair and equal treatment regardless of their race (including hair texture and protective hairstyles, such as braids, locks, and twists), color, religion, creed, sex/gender, marital or registered domestic partnership status, age, national origin or ancestry, citizenship, pregnancy, childbirth, breastfeeding or related medical conditions, mental or physical disability (including HIV and AIDS), medical condition including genetic information or characteristics (including those of family members), sexual orientation, veteran or military status, gender identity, gender expression, transgender status or any other basis protected by federal, state or local law, ordinance or regulation. The policy not to discriminate includes, but is not limited to, advertising for positions, recruiting, hiring, placement, promotion, transfer, rates of pay, discipline and termination. No recruiters or recruitment agencies.

The Manufacturing Engineer (NPI) will contribute technical manufacturing and project management skills in developing manufacturing solutions for new product introduction. This individual will Engineer process planning (CAD) and machine code (CAM) to meet dimensional requirements of the end design. This individual will be responsible for successful product realization including product validation and verification. This position is in Northstar's Engineering Department, and reports to the Engineering Manager. The position works with all levels of employees throughout the organization as necessary but does not directly or indirectly supervise any other employees. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all inclusive and may be amended by Northstar, from time to time. Develop Manufacturing process using 3D models to define each manufacturing sequence. Conduct a design review with key stakeholders to identify potential manufacturing defects. Perform PFMEA and implement corrective actions. Develop in-process drawings and inspection plan to provide process control. Develop CNC code with emphasis on error free output, using verification and stock analysis tools. Design and develop tooling to support the Manufacturing process. Read and interpret blueprints, symbols and geometric tolerances based on military and commercial specifications. Provide manufacturing support to shop floor personnel. Develop and maintain the production shop floor travelers. Investigate and correct quality issues related to the new product. Serve as technical liaison with customer engineering and quality personnel. The employee will be responsible for handling sensitive information in accordance with all applicable security standards, guidelines, and company policies. Information Types International Traffic in Arms Regulations (ITAR) Controlled Unclassified Information (CUI) Export Administration Regulations (EAR) SUPERVISORY RESPONSIBILITIES This position will not direct the work of any other employees. PHYSICAL REQUIREMENTS The physical requirements of this position are listed below. This list is not all inclusive and may be amended by Northstar, from time to time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the position. Frequent sitting, standing, walking, talking, hearing, seeing, writing, and typing. Occasional lifting of up to 40 pounds. Occasional reaching, climbing, balancing, stooping, kneeling, crouching, pushing, pulling, fingering, grasping, feeling, twisting, bending and repetitive motion. Frequent exposure to moving mechanical parts, fumes, or airborne particles. Frequent exposure to moderate to heavy noise. The ability to wear proper personal protective equipment, including earplugs, safety glasses, safety shoes, etc. Visual acuity to determine the accuracy and thoroughness of product and/or parts. QUALIFICATIONS AND EXPERIENCE REQUIRED AND/OR PREFERRED Education Preferred: BS Degree in Manufacturing/Mechanical/Industrial Engineering or related engineering discipline. Experience Required: Minimum of 10 years of industry experience, preferable in aerospace. KNOWLEDGE, SKILLS AND ABILITIES REQUIRED AND/OR PREFERRED The knowledge, skills and abilities required and/or preferred for this position are listed below. This list is not all inclusive and may be amended by Northstar, from time to time. Able to read blueprints and have extensive experience applying GD&T to manufacturing operations. Must be extremely competent in CAD/CAM systems, specifically NX12. Must have recent programming experience including milling, turning, and in-machine probing. Must have recent experience machining aluminum, magnesium, and alloy steels. Must have a solid understanding of metal cutting technology. Must be computer competent with MS Office, Project, and ERP systems. Must be familiar with specifications, and requirements for aerospace component manufacturing. Knowledgeable of aerospace welding, heat treatment, machining, and special processes. Abide by established policies, plans, methods, procedures, deadlines, and priorities. Must be dependable, professional, flexible, have a positive attitude and a solid work history.

: Crown Equipment Corporation is a leading innovator in world-class forklift and material handling equipment and technology. As one of the world's largest lift truck manufacturers, we are committed to providing the customer with the safest, most efficient and ergonomic lift truck possible to lower their total cost of ownership. Job Located in Kingman, AZ Job Duties * Support current process technology and implement improvements to department/plant operations based upon manufacturing engineering analysis of existing operations compared to future requirements based on capacity, cost reduction, safety and/or risk avoidance opportunities. * Help to prepare project justification including recommendations, make-vs-buy analysis, layout, cost impact and schedule activities as required. Implementation of processes including equipment procurement, coordination of installation, process capability prove-out, training, process documentation, work standard measurement and production start-up. * Contribute to the product introduction process. * Review production problems as they are identified and implement solutions. Develop, implement and update documentation and training * Develop reports, project briefings and management presentations. Perform other duties as assigned. Minimum Qualifications * 8-15 years related experience * High School graduate or equivalent * Job requires employee to drive a personal vehicle to conduct company business < 20% per week (8 hours) and/or travel locally between company locations during scheduled workday. * Must demonstrate good communication skills amongst shop floor, support staff, and plant leadership. * Must be able to lead and execute small teams and projects. * Requires good organizational and interpersonal skills, and the ability to train others * Per 8-hour shift. Sit 8 hours and stand 0 hours. Typical office environment (low noise level, limited exposure hot/cold temperatures, dust, fumes, and vibrations). Regular interaction with others and performs a degree of independent work. Physical and mental demands are akin to the majority of office positions with prolonged periods of sitting and prolonged use of a computer/keyboard. Infrequent lifting, walking and climbing stairs. Occasional use of office equipment (copiers, printers, etc.). Preferred Qualifications * Certain technical skills and training such as CNC programming, CAD layout, geometric dimensioning and tolerance (GD&T), process capability theory and statistical process control (SPC) may be required. Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities Nearest Major Market: Lake Havasu Job Segment: Manufacturing Engineer, CNC, Drafting, CAD, Forklift, Engineering, Manufacturing

: Crown Equipment Corporation is a leading innovator in world-class forklift and material handling equipment and technology. As one of the world's largest lift truck manufacturers, we are committed to providing the customer with the safest, most efficient and ergonomic lift truck possible to lower their total cost of ownership. Job Located in Kingman, AZ Job Duties Support current process technology and implement improvements to department/plant operations based upon manufacturing engineering analysis of existing operations compared to future requirements based on capacity, cost reduction, safety and/or risk avoidance opportunities. Help to prepare project justification including recommendations, make-vs-buy analysis, layout, cost impact and schedule activities as required. Implementation of processes including equipment procurement, coordination of installation, process capability prove-out, training, process documentation, work standard measurement and production start-up. Contribute to the product introduction process. Review production problems as they are identified and implement solutions. Develop, implement and update documentation and training Develop reports, project briefings and management presentations. Perform other duties as assigned. Minimum Qualifications 8-15 years related experience High School graduate or equivalent Job requires employee to drive a personal vehicle to conduct company business < 20% per week (8 hours) and/or travel locally between company locations during scheduled workday. Must demonstrate good communication skills amongst shop floor, support staff, and plant leadership. Must be able to lead and execute small teams and projects. Requires good organizational and interpersonal skills, and the ability to train others Per 8-hour shift. Sit 8 hours and stand 0 hours. Typical office environment (low noise level, limited exposure hot/cold temperatures, dust, fumes, and vibrations). Regular interaction with others and performs a degree of independent work. Physical and mental demands are akin to the majority of office positions with prolonged periods of sitting and prolonged use of a computer/keyboard. Infrequent lifting, walking and climbing stairs. Occasional use of office equipment (copiers, printers, etc.). Preferred Qualifications Certain technical skills and training such as CNC programming, CAD layout, geometric dimensioning and tolerance (GD&T), process capability theory and statistical process control (SPC) may be required. Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities

: Crown Equipment Corporation is a leading innovator in world-class forklift and material handling equipment and technology. As one of the world's largest lift truck manufacturers, we are committed to providing the customer with the safest, most efficient and ergonomic lift truck possible to lower their total cost of ownership. **Job Located in Kingman, AZ** **Job Duties** + Support current process technology and implement improvements to department/plant operations based upon manufacturing engineering analysis of existing operations compared to future requirements based on capacity, cost reduction, safety and/or risk avoidance opportunities. + Help to prepare project justification including recommendations, make-vs-buy analysis, layout, cost impact and schedule activities as required. Implementation of processes including equipment procurement, coordination of installation, process capability prove-out, training, process documentation, work standard measurement and production start-up. + Contribute to the product introduction process. + Review production problems as they are identified and implement solutions. Develop, implement and update documentation and training + Develop reports, project briefings and management presentations. Perform other duties as assigned. **Minimum Qualifications** + 8-15 years related experience + High School graduate or equivalent + Job requires employee to drive a personal vehicle to conduct company business < 20% per week (8 hours) and/or travel locally between company locations during scheduled workday. + Must demonstrate good communication skills amongst shop floor, support staff, and plant leadership. + Must be able to lead and execute small teams and projects. + Requires good organizational and interpersonal skills, and the ability to train others + Per 8-hour shift. Sit 8 hours and stand 0 hours. Typical office environment (low noise level, limited exposure hot/cold temperatures, dust, fumes, and vibrations). Regular interaction with others and performs a degree of independent work. Physical and mental demands are akin to the majority of office positions with prolonged periods of sitting and prolonged use of a computer/keyboard. Infrequent lifting, walking and climbing stairs. Occasional use of office equipment (copiers, printers, etc.). **Preferred Qualifications** + Certain technical skills and training such as CNC programming, CAD layout, geometric dimensioning and tolerance (GD&T), process capability theory and statistical process control (SPC) may be required. **Work Authorization:** Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. **Compensation and Benefits:** Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities

Job Description At Areté, we are on the forefront of utilizing innovative solutions, with great minds from all backgrounds, to help solve the nation's most complex security challenges. We strive for an inclusive, collaborative team environment that approaches differences as opportunities for innovation and excellence. As an employee-owned company, we foster an atmosphere that propels diverse career opportunities and professional growth. Discover your future with us. We support the development of new detection capabilities that use a variety of remote sensing methodologies (EO/IR, Radar, Lidar, Chemical/Biological sensors, etc.). We are seeking outstanding applicants for our Engineer 2, Optical Systems position in Tucson, Arizona. The successful candidate will develop and execute engineering development projects which typically involve applying fundamental understanding of optical phenomena related to various sensor systems, developing performance models, designing optical hardware, and using basic mathematical methods to solve scientific and engineering problems. This position is an exempt, non-supervisory, full-time role. Primary responsibilities: Design, models, integrates, and tests optical sensor systems including visible and IR cameras, LIDAR systems, and optical test equipment. Develops software for the purpose of testing and automating test procedures. Works in conjunction with systems engineers, mechanical engineers, electrical engineers and software engineers to provide integrated design solutions for Arete's customers. Responsibilities include assisting with requirements development, concept and detailed design, presentation to customer at SRR, PDR, CDR, assembly, integration, and field testing. Develop and apply imaging sensor performance models including MTF and radiometric models Optical systems design including visible and IR imaging system Testing of Fast Steering Mirrors Development of requirements Presentation of results to staff and customers May support outdoor field tests with occasional travel We have an impressive range of benefits, programs, and perks that we offer: Health & Wellness: Medical, Dental & Vision Insurance Life and Long-Term Disability (LTD) Vision Reimbursement Fitness Reimbursement Financial: Company-funded 5% contribution to your 401(k) retirement plan Company-funded 5% contribution to your Employee Stock Ownership Plan Continuing Education Assistance Work-Life Balance: Flexible Scheduling Paid Time Off (PTO) Paid Parental and Bereavement Leave What We Value: Creativity and innovation in solving challenges Integrity and responsibility in all actions Collaboration across teams and specialties Responsiveness in fast-paced environments Passion for national security and excellence Experiences and Background We Look For: Bachelor's or Master's in optical engineering, electrical engineering with optics emphasis or other relevant field with strong emphasis on optics Experience with scientific programming in Labview, Matlab, Python, or similar languages Data acquisition and instrument control using LabVIEW or Python Intellectual curiosity and desire for continuous learning US citizenship Nice to have: Infrared imaging experience including system design, modeling and test Experience with large format (16MP+) cryogenically cooled IR IDECAs Experience developing custom IR lenses Experience with Fast Steering Mirrors Zemax or similar optical design software Active security clearance The salary range for this role is $90,000 to $130,000; however, Arete considers several factors when extending an offer of employment, including but not limited to: the position and associated responsibilities, a candidate's work experience, education/training, and key skills. Other Considerations Areté is committed to the principles of equal employment opportunity and nondiscrimination, and we believe every person has the right to be treated with fairness, dignity, and equal consideration. Areté is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, marital status, national origin, age, veteran status, disability, or any other characteristic protected by applicable federal, state, or local law. U.S. citizenship is required to meet position eligibility. Successful passage of a criminal background screen is required to meet position eligibility. Selected applicants will be subject to a government security investigation and must meet eligibility requirements for access to classified information. Areté will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring. Successful passage of a Department of Transportation (DOT) drug test is required to meet position eligibility. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our website because of your disability. To request an accommodation, please contact Areté Human Resources at ************ for assistance.

At Areté, we are on the forefront of utilizing innovative solutions, with great minds from all backgrounds, to help solve the nation's most complex security challenges. We strive for an inclusive, collaborative team environment that approaches differences as opportunities for innovation and excellence. As an employee-owned company, we foster an atmosphere that propels diverse career opportunities and professional growth. Discover your future with us. We support the development of new detection capabilities that use a variety of remote sensing methodologies (EO/IR, Radar, Lidar, Chemical/Biological sensors, etc.). We are seeking outstanding applicants for our Engineer 2, Optical Systems position in Tucson, Arizona. The successful candidate will develop and execute engineering development projects which typically involve applying fundamental understanding of optical phenomena related to various sensor systems, developing performance models, designing optical hardware, and using basic mathematical methods to solve scientific and engineering problems. This position is an exempt, non-supervisory, full-time role. Primary responsibilities: Design, models, integrates, and tests optical sensor systems including visible and IR cameras, LIDAR systems, and optical test equipment. Develops software for the purpose of testing and automating test procedures. Works in conjunction with systems engineers, mechanical engineers, electrical engineers and software engineers to provide integrated design solutions for Arete's customers. Responsibilities include assisting with requirements development, concept and detailed design, presentation to customer at SRR, PDR, CDR, assembly, integration, and field testing. Develop and apply imaging sensor performance models including MTF and radiometric models Optical systems design including visible and IR imaging system Testing of Fast Steering Mirrors Development of requirements Presentation of results to staff and customers May support outdoor field tests with occasional travel We have an impressive range of benefits, programs, and perks that we offer: Health & Wellness: Medical, Dental & Vision Insurance Life and Long-Term Disability (LTD) Vision Reimbursement Fitness Reimbursement Financial: Company-funded 5% contribution to your 401(k) retirement plan Company-funded 5% contribution to your Employee Stock Ownership Plan Continuing Education Assistance Work-Life Balance: Flexible Scheduling Paid Time Off (PTO) Paid Parental and Bereavement Leave What We Value: Creativity and innovation in solving challenges Integrity and responsibility in all actions Collaboration across teams and specialties Responsiveness in fast-paced environments Passion for national security and excellence Experiences and Background We Look For: Bachelor's or Master's in optical engineering, electrical engineering with optics emphasis or other relevant field with strong emphasis on optics Experience with scientific programming in Labview, Matlab, Python, or similar languages Data acquisition and instrument control using LabVIEW or Python Intellectual curiosity and desire for continuous learning US citizenship Nice to have: Infrared imaging experience including system design, modeling and test Experience with large format (16MP+) cryogenically cooled IR IDECAs Experience developing custom IR lenses Experience with Fast Steering Mirrors Zemax or similar optical design software Active security clearance The salary range for this role is $90,000 to $130,000; however, Arete considers several factors when extending an offer of employment, including but not limited to: the position and associated responsibilities, a candidate's work experience, education/training, and key skills. Other Considerations Areté is committed to the principles of equal employment opportunity and nondiscrimination, and we believe every person has the right to be treated with fairness, dignity, and equal consideration. Areté is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, marital status, national origin, age, veteran status, disability, or any other characteristic protected by applicable federal, state, or local law. U.S. citizenship is required to meet position eligibility. Successful passage of a criminal background screen is required to meet position eligibility. Selected applicants will be subject to a government security investigation and must meet eligibility requirements for access to classified information. Areté will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring. Successful passage of a Department of Transportation (DOT) drug test is required to meet position eligibility. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our website because of your disability. To request an accommodation, please contact Areté Human Resources at ************ for assistance.

Summary Description: AeroTEC's Engineering Services Department supports and provides comprehensive, full-service aerospace engineering services to customers in aircraft design, test and certification. The Engineering Services Department is responsible for providing engineering consulting services related to requirements management, aircraft design, performance, similarity analysis, reviewing and supporting certification activities, determining test requirements, and planning and documenting testing to meet customer needs. These services vary, depending on the customer needs and objectives. The Engineering Services Department provides areas of expertise such as Flight Sciences, Electrical Systems, Mechanical Systems, Powerplant & FIFA, Air Systems, Safety, Structures, Flight Controls, Systems and Liaison Engineering. The Aerospace Engineer - Requirements position is a senior-level role responsible for the architecture, definition, and management of system requirements across the entire product development lifecycle. This position requires a deep understanding of the first principles of systems engineering and the ability to scale processes based on project rigor. This position supports the focal systems engineers in design, developing, testing and certifying a system/s for a project. This role requires the significant exercise of independent discretion and judgment in matters of significance. Job Duties and Responsibilities (Essential Functions): Requirements Engineering & Systems Development: Generate comprehensive aircraft and system requirements. Create high-level and low-level system requirements with a focus on technical integrity and traceability. Establish robust validation and verification (V&V) plans for system requirements to ensure design intent is met. Manage and determine change control processes, ensuring impact assessments are performed for all technical revisions. Assess compliance of systems, components, installation, and operation against defined requirements. Communicate system needs and architectural constraints to internal and external design consumers. Compare design solutions and perform trade studies based on requirement satisfaction. Determine key design parameters, including speed of operation, force limits, command authority, and performance under failure conditions. Apply a first-principles approach to systems engineering to solve complex integration challenges. Adapt requirements management rigor (from lean/rapid prototyping to high-criticality formal programs) based on specific project needs and customer environments. Systems Design & Lifecycle Support: Participate in Systems Design Reviews (SRR, PDR, CDR) Review requirements for completeness, technical feasibility, and suitable verification methods. Analyze mechanical or system-level failures to determine root cause and corrective actions based on requirement gaps. Coordinate with suppliers to review technical data, including supplier developed requirements, and ensure alignment with system-level requirements. Perform component and installation drawing reviews to ensure physical implementation matches requirement specifications. Provide expertise across the full product development lifecycle, from initial concept and requirements capture to final system integration and hardware-in-the-loop testing to aircraft flight testing Complete special projects and tasks assigned by Group Lead. Knowledge/Skills/Abilities: Tool Proficiency: Proficient in Jama Connect for requirements authoring, traceability, and review management. Industry Standards: Deep familiarity with ARP4754B (Guidelines for Development of Civil Aircraft and Systems). Systems Expertise: Mastery of the system engineering development process, including requirements origination, management, revision, validation, and verification. Adaptability: Proven ability to transition between rigorous aerospace standards and more agile, lean development processes. Leadership: Strong leadership presence with the ability to lead by example, instill urgency, and remain objective in difficult situations. Communication: Exceptional oral and written communication skills, with the ability to influence stakeholders and relate to individuals at all levels of the organization. Problem Solving: Strong analytical skills with an ability to troubleshoot, problem-solve, and make efficient decisions under pressure. Project Management: Results-oriented planner who takes ownership of tasks and hits projected schedules. Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems. Proven track record of improving the efficiency of assigned processes or procedures. Qualifications Level Requirements (Minimum): Education Four (4) year degree in Engineering (Aerospace, Mechanical, Electrical, Systems). Other Engineering fields may be considered. Experience Ten (10+) years of Aerospace Engineering experience. Proven experience across the full product development lifecycle. Extensive experience in Mechanical Systems, Avionics, Flight Control Systems, Landing Gear, Hydraulics, or similar complex aircraft systems. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: While performing the duties of this job, the employee is regularly required to talk and/or hear. The employee is frequently required to sit, stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Must have the ability to sit for long periods of time. The employee is occasionally required to climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Travel (flying and driving) to various domestic and international worksites and client offices are required. Frequent travel required to the Moses Lake Facility for extended periods of time during scheduled flight test operations. This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, Lawful Permanent Resident, Refugee, or Asylee. AeroTEC is an equal opportunity employer.

About the Team AeroTECs Engineering Services Department supports and provides comprehensive, full-service aerospace engineering services to customers in aircraft design and certification. The Engineering Services Department is responsible for providing engineering consulting services related to aircraft performance, similarity analysis, reviewing and supporting certification activities, determining test requirements, and planning and documenting testing to meet customer needs. The Engineering Services Department provides several areas of expertise in Flight Sciences, Electrical Systems, Mechanical Systems, Powerplant & FIFA, Air Systems, Cabin Safety, Structures and Liaison Engineering. About the Role The Aerospace Engineer, EWIS (Electrical Wiring Interconnect System) position is responsible for designing, analyzing, and maintaining the electrical configuration of aircraft systems. These EWIS aspects are for various systems and components on an airplane and rotorcraft. This role requires the significant exercise of independent discretion and judgment in matters of significance. In This Role You Will: Review and understand customer specifications, technical documentation, and electrical configurations. Analyze design requirements and perform trade-off studies. Produce and validate electrical documentation, such as wiring diagrams and harness data reports. Create and maintain tracking tools for quality and productivity. Review and analyze the electrical configuration of aircraft systems, read and understand the technical documentation such as schematics. Produce and validate electrical documentation such as wiring diagrams (WD) and harness data report (HDR). Create and maintain quality and productivity tracking tools Work in close cooperation with other engineering disciplines such as Systems, Electrical, Avionics, EMC, Safety, etc. Work in close cooperation with other non-engineering disciplines such as Quality, Logistics, Methods, Customer support, etc. Keep an open and innovative mindset to implement improvements. Qualifications The Skills You Will Bring (Minimum): Education: Four (4) year degree in Engineering (Aerospace or Electrical) or equivalent experience. Experience Required: Capital Harness (min. 5 years of experience). Ability to work on-site (Seattle). Preferred: Five (5) years aerospace experience in EWIS, including experience in the electrical aspects of the various systems and components and/or controllers on the airplane. Knowledge of aircraft systems (EWIS, Electrical, Avionics, Safety, etc.). Strong understanding of electrical harness assemblies, components, and routing. Strong knowledge of aircraft wiring (EWIS) & electrical systems is required. Experience with AutoCAD, CATIA, NX, Capital or any relevant electrical software. Experience working with electrical schematics and test environments. Familiarity with FAR Part 25 subpart H and certification rules addressing EWIS. You are familiar with SAE-AS50881 covering all aspects of EWIS. You are familiar with RTCA/DO-160 environmental conditions & test procedures. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: While performing the duties of this job, the employee is regularly required to talk and/or hear. The employee is frequently required to sit, stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Must have the ability to sit for long periods of time. The employee is occasionally required to climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Occasional travel (flying and driving) to various domestic and international worksites and client offices may be required. Occasional travel to the Moses Lake Facility for extended periods of time during scheduled flight test operations may be required. This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, Lawful Permanent Resident, Refugee, or Asylee. AeroTEC is an equal opportunity employer.

AeroTECs Engineering Services Department supports and provides comprehensive, full-service aerospace engineering services to customers in aircraft design, test and certification. The Engineering Services Department is responsible for providing engineering consulting services related to aircraft design, performance, similarity analysis, reviewing and supporting certification activities, determining test requirements, and planning and documenting testing to meet customer needs. These services vary, depending on the customer needs and objectives. The Engineering Services Department provides areas of expertise such as Flight Sciences, Electrical Systems, Mechanical Systems, Powerplant & FIFA, Air Systems, Cabin Safety, Structures, Flight Control, and System Safety Engineering. The Aerospace Engineer - Systems Safety III is a role responsible for supporting the focal systems engineer in design, development, and directly responsible for the safety assessments of aircrafts, systems and/or components. This position requires a mastery of the first principles of designing for safety, allowing the engineer to apply the appropriate level of rigor to both certified civil aircraft programs and non-certified rapid prototyping projects. The role requires significant exercise of independent discretion and judgment in matters of significance. Job Duties and Responsibilities (Essential Functions): Safety Analysis & Requirements Engineering Generate and manage safety requirements, at appropriate levels, to ensure design integrity. Create validation and verification (V&V) plans specifically for safety requirements. Assess compliance of systems, components, and installations against safety requirements. Conduct comprehensive safety analyses in accordance with SAE ARP4761A, including: Aircraft and System Functional Hazard Assessments (AFHA/SFHA). Failure Mode and Effects Analysis (FMEA/FMECA) and Summary (FMES). Preliminary System Safety Assessments (PSSA) and System Safety Assessments (SSA), including Fault Tree Analyses (FTA) at the unit, system, and aircraft levels. Common Cause Analysis (CCA) including Zonal Safety Analysis (ZSA), Particular Risk Analysis (PRA), and Common Mode Analysis (CMA). Understand the interdependencies between safety artifacts and other engineering activities (e.g., requirements, design, and testing) within the product development lifecycle. Communicate the system needs to internal and external consumers of the design Knowledge of the system engineering development process, including requirements development and management per SAE ARP4754B. Experience working in safety-specific tools such as CAFTA or RELEX, as well as Microsoft Office (Intermediate Excel required). Certification & Compliance Build safety artifacts required to show compliance for certification of civil aircraft under 14 CFR Parts 23, 25, 27, and/or 29. Review and support development and execute Certification Plans. Coordinate with certification authorities to seek clarification on requirements. Review certification guidance material (e.g., Advisory Circulars) and incorporate necessary guidance into safety strategies. Participate in Systems Design Reviews to ensure safety is integrated from conceptual design through final integration. Analyze mechanical or system failures to determine root cause and develop corrective actions based on safety principles. Customer Interaction & Supplier Technical Oversight Coordinate with customers and suppliers to review technical data, safety processes, and design compliance. Communicate system safety needs and constraints to both internal and external design consumers. Compare design solutions specifically through the lens of safety and risk mitigation. Complete special projects and tasks assigned by Group Lead Qualifications Level Requirements (Minimum): Education Four (4) year degree in Engineering (Aerospace, Mechanical, Electrical, Systems). Other Engineering fields may be considered. Experience Five (5+) years of Aerospace Engineering experience. Proven experience across much of the product development lifecycle. Experience in Mechanical Systems, Avionics, Flight Control Systems, Landing Gear, Hydraulics, or similar complex aircraft systems Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: While performing the duties of this job, the employee is regularly required to talk and/or hear. The employee is frequently required to sit, stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Must have the ability to sit for long periods of time. The employee is occasionally required to climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Travel (flying and driving) to various domestic and international worksites and client offices are required. This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, Lawful Permanent Resident, Refugee, or Asylee. AeroTEC is an equal opportunity employer.

With our strong investment in research and development and our culture of continuous improvement, Hexcel is the industry leader in the manufacturing of advance composite materials, including carbon fiber, woven reinforcements, resins, prepregs, honeycombs and additive manufactured parts. We invite you to join the Hexcel team at various manufacturing sites, sales offices and R&T centers around the globe. Become a part of the "strength within." Hexcel is currently seeking a Quality Engineer III for our Kent, WA location. Are you ready to lead quality initiatives and drive operational excellence in a dynamic aerospace environment? As a Quality Engineer III, you'll provide leadership in quality and inspection planning, change management, and Bill of Material (BOM) planning. In this role, you'll ensure consistency, accuracy, and reliability across processes and quality controls by guiding review boards, approving specifications, analyzing corrective actions, and conducting audits. Summary pay range: $77,968 - $130,228 annual salary. The selected individual will be responsible for but not limited to the following obligations: * Comply with Hexcel policies, procedures, and Code of Business Conduct. * Review contracts, drawings, and specifications to develop quality plans and inspection criteria; approve production planning for quality, first article, and inspection requirements. * Create and maintain quality documentation to support accuracy and compliance. * Communicate quality standards internally and externally; maintain strong customer relationships and support workforce training. * Review and process non-conforming materials; lead corrective and preventive actions and support MRB activities. * Conduct internal and external audits; evaluate findings and implement corrective actions. * Lead strategic quality planning and drive cross-functional initiatives, including enterprise-level improvement and innovation projects. * Develop and implement supplier quality strategies and global alignment programs. * Utilize predictive analytics and digital quality systems to enhance quality performance. * Mentor level I & II QEs and other team members; provide formal leadership in quality projects. Qualifications: * Bachelor's degree in engineering, Quality, or related field required; master's preferred. * 5+ years of experience in quality engineering with leadership responsibilities. * Expertise in quality management systems, compliance standards (AS9100, Nadcap), and advanced analytics. * Proven ability in strategic planning, supplier quality management, and cross-functional leadership. * Strong leadership, communication, and influencing skills with a strategic decision-making mindset. * Experience with digital transformation in quality, predictive tools, and data analytics platforms. * Advanced problem-solving skills and innovation mindset; proficiency in Lean/Six Sigma (certification strongly preferred). * ASQ certifications (CQE preferred) and Certified Lead Auditor training desirable. * Ability to interpret technical drawings and specifications, including MBD; familiarity with measurement and inspection equipment. * Experience with composite materials and lean manufacturing is a plus. At Hexcel, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. Hexcel also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown above is a general guideline only. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Eligible candidates must be a: U.S. citizen, U.S. national, person lawfully admitted for permanent residence, temporary resident under sections 210(a) or 245(A) of the Immigration and Nationality Act, person admitted in refugee status, or person granted asylum. Hexcel (NYSE: HXL) is a global leader in advanced composites technology, a leading producer of carbon fiber, and the world leader in honeycomb manufacturing for the commercial aerospace industry. Hexcel is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, physical or mental disability, status as a protected veteran, or any other protected class.