Maintenance Technician jobs at Hexpol Compounding - 3507 jobs

It's fun to work in a company where people truly BELIEVE in what they're doing! We're committed to bringing passion and customer focus to the business. Minimum Requirements: The candidate will have at least two years of industrial or service experience, ideally in a maintenance-related field, with an emphasis on safety. The candidate must also be able to communicate effectively and professionally via email and technical reports using proper grammar, spelling, and syntax. High school diploma or equivalent is also required. We are willing to train a motivated candidate with the right attitude and aptitude. A personable demeanor is required. Desired Attributes: An understanding of motors, pumps, fans, and bearings is desirable (general mechanical aptitude). At least 2-4 years of vibration testing and analysis is desired with ISO certification and Emerson/CSI test equipment (2130/2140) experience a plus. Compensation is commensurate with experience. Duties: Primary: Collect & analyze vibration data on a variety of industrial equipment (motors, fans, pumps, gearboxes, etc.) Understand spectral and time-waveform components for identifying faults Perform bump tests to determine natural frequencies Perform cross-phase analysis to determine comparative motion and differentiate similar faults Perform infrared thermography surveys on low and medium voltage electrical systems. OJT is available. Collect oil samples on a variety of industrial equipment (hydraulic systems, bearing housings, gearboxes, etc.) Collect deenergized electrical test data on low and medium voltage motor starter circuits (resistance to ground, resistance phase to phase, inductance phase to phase, capacitance to ground). OJT is available. Perform analysis and technical reporting on the above, meeting time requirements imposed both internally and by the customer Schedule service calls with customers and maintain a calendar Safeguard and maintain all company equipment Physical Requirements: Be able to climb permanent ladders (up to 40 vertical feet), crawl, stretch, kneel, stand and walk for extended periods, at least 8 hours Be able to walk up/down stairs equivalent to 50-100 vertical feet. Lift and carry up to 50 pounds Work wearing a dust mask or respirator Work for 1-2 hours while wearing acid PPE, including raincoats or plastic suits with face shields. Be able to travel by airplane and/or drive to customer job sites (some drives between 4-8 hours depending on candidate & customer proximity) Be able to spend multiple nights out of town (overnight travel typically 35-45% after initial training period of 6 months, up to 75% during training period) Be able to work in a variety of environmental conditions (>90F, Administrative Requirements: Basic computer skills (MS Word, MS Excel, MS Outlook, Adobe Acrobat) Good to excellent writing skills, grammar. Planning and scheduling time, including meeting deadlines Submitting expense reports and timesheets Benefits: Typical and competitive. Also includes company laptop, mobile phone, credit card, and service vehicle If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!

**SIGN ON BONUS UP TO $5,000** Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Pay Range $40.11-$51.32 USD Principal Duties/Responsibilities: · Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to locate root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment. · Independently performs maintenance as per industry standards. · Works with Planner Scheduler to optimize preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Complies with 5S and housekeeping standards. · Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology. · Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development. · Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes predictive maintenance technologies to collect equipment performance data. Observes trends and makes recommendations. · Updates records and reviews CMMS history and analyzes data. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 5 years of related experience in specific industry; or, 7 years of experience in specific industry. · Experience in predictive technologies, precision alignments, and general maintenance of applicable process equipment. · Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate. · Experience in vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.

Paragon Medical, a business of AMETEK, is a trusted partner in medical device manufacturing. We offer end-to-end solutions from concept to final production. With expertise across various applications, we deliver high-precision components and complete products tailored to exceed customer expectations. Duties and Responsibilities: Under minimal supervision, installs, repairs, and maintains the following machine manuals, prints, or by referral to building codes: Physical structures. Electrical wiring. Plumbing and fixtures. HVAC Includes motor and engine, CNC, electrical, pneumatic, and PLC. Fanuc, Mitsubishi, and Haas controls preferred. Assists higher-level maintenance. Assure all policies and procedures are followed and safety precautions are taken to reduce the risk of injury. Responsible for facility and ground maintenance. Expected to be on call. Occasional travel may be necessary. Occasional use of personal vehicle may be needed for pickup/delivery of machine parts. Other maintenance and facilities duties as assigned. Once an employee demonstrates competency in a position, he/she may be required to train others in similar roles. MaintainX system experience a plus The ideal candidate will be a proficient problem solver independently or with a team. Work Environment: Work performed in a Plant environment. Exposure to odor, noise, dust, heat, cold, chemicals, and other elements. The noise level in the work environment is usually moderate Education and Experience: * Minimum High School or GED. Trade school or professional training preferred. * 3 - 6 years of experience Compensation Employee Type: Hourly Salary Minimum: $60,000 Salary Maximum: $85,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit ************** for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call ****************. Nearest Major Market: Dayton

Betts Company is seeking an experienced Maintenance Technician III to join our team in Fresno, CA. This senior-level role is responsible for diagnosing complex equipment issues, performing advanced repairs, and leading key maintenance initiatives. The ideal candidate will possess expert-level skills in mechanical, electrical, and automated systems, and play a vital role in training and mentoring junior technicians. Why Join Betts? Paid vacation 8 paid holidays Annual performance-based salary increases Excellent health, dental, and vision coverage 401(k) with company contribution Yearly boot allowance Company-sponsored life insurance Positive work culture and a legacy of over 150 years Career growth opportunities and strong company values known as The Betts Way Key Responsibilities Diagnose and repair advanced mechanical, electrical, pneumatic, and hydraulic systems. Lead and manage maintenance projects, including upgrades and process improvements. Troubleshoot and program PLCs, VFDs, servo drives, and control systems. Conduct advanced welding, machining, and fabrication tasks. Perform preventative maintenance and ensure accurate documentation. Train, mentor, and support development of junior maintenance staff. Collaborate with leadership and cross-functional teams to support operational goals. Ensure all work complies with company safety policies and OSHA standards. Requirements Education & Experience High school diploma or GED required; technical training preferred. Minimum 3-5 years of experience in industrial maintenance. Forklift certification required. Knowledge & Skills Expert troubleshooting skills for PLCs, VFDs, CNC machinery, and industrial automation. Strong understanding of pneumatics, hydraulics, and electrical schematics. Leadership skills with experience training or mentoring others. Ability to work independently and handle multiple priorities effectively. Commitment to safety and regulatory compliance. Tools & Equipment Used Lifting/Rigging: Boom lifts, scissor lifts, forklifts, ladders, hoists Machining/Fabrication: Lathe, mill, drill press, sheet metal shear, presses Welding/Cutting: Plasma cutter, torch, MIG/TIG/ARC welders, soldering iron Finishing Tools: Grinders, sanders Electrical/Mechanical: Multi-meters, hydraulic controls, power and hand tools Industrial Systems: Furnaces, air compressors, burners, plumbing, pneumatics Physical Requirements Lift/move up to 50 lbs and work in confined spaces Stand, bend, stoop, climb for extended periods Willingness to work flexible hours, including overtime if needed EEO Statement Betts Company is proud to be an Equal Opportunity Employer. We value diversity and are committed to fostering an inclusive environment for all employees. Employment is contingent on successful completion of a physical and drug screening. Salary Description $36.00 an hour

ABM, a leading provider of integrated facility solutions, is looking for a Facilities Maintenance Technician to complete assigned preventive maintenance and reactive maintenance repairs requiring conveyor, mechanical, plumbing, electrical, instrumentation, HVAC and other equipment, systems or structures. Ensures repairs and maintenance to all equipment and facilities. Responds to spills and other emergency situations, performing tasks necessary. Assists in emergencies as needed. **Compensation:** $32 - $37 hourly _The pay listed is the hourly range for this position. Any specific offer will vary based on the successful applicant's education, experience, skills, abilities, geographic location, and alignment with market data._ **Benefit Information:** ABM offers a comprehensive benefits package. For information about ABM's benefits, visit ABM 2025 Employee Benefits | Front Line Team Members (******************************************************************************************************************** **Essential Functions** These technicians ensure all machines function properly through troubleshooting and preventive maintenance service. Ability to use the tools of the trade (e.g. multimeter, charging charts, hand tools etc.) **Responsibilities** Installs, maintains and repairs HVAC systems and equipment Identifies maintenance risks on equipment Diagnoses electrical and mechanical faults for HVAC systems Cleans, adjusts and repairs systems, and performs warranty services Performs emergency repairs promptly and efficiently Provides technical direction and on-the-job training Keeps daily logs and records of all maintenance functions Ensures compliance with appliance standards and with Occupational Health and Safety Act Complies with service standards, work instructions and customers' requirements Assists with customers' queries Completes other duties as assigned **Qualifications** High school diploma, GED or suitable equivalent HVAC Trade or Vocational certification preferred 3+ years' experience as an HVAC technician, and willingness to continue education in HVAC field **About Us** ABM (NYSE: ABM) is one of the world's largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM's comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries - from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit *********** . ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call ************. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. \#P1 \#400

Job Summary: The Utility Technician is an entry level role. They will work closely with experienced shop and field techs and assist them as needed. They may be asked to perform repairs based on their skill set. Job Responsibilities: Perform daily and operational activities in the service department to include the following, but not limited to: Assist all service team members as needed Clean parts, scrape gaskets, prep for assembly Clean and prep all rental equipment Maintain safety and cleanliness of work environment Assist with lube truck work as needed Travel to jobsites and vendor training sessions as needed All other job duties as assigned by Service Manager, Rental Foreman, or Shop Supervisor Job Qualifications: Must have High School Diploma or equivalent, a 2 year technical degree or comparable military training is preferred Experience in the heavy equipment industry or a related field a plus Excellent written and oral communication and basic mathematical skills. Proficient with a computer, including the use of Microsoft programs (Word, Excel, PowerPoint, etc.) and diagnostic use using manufacturer provided programs. Must have a good working knowledge of equipment operations and mechanical functions. Ability to stoop, kneel, push, pull, twist and carry and lift up to 70lbs. Ability to climb and perform work on heights of 15 feet Able to work in all types of weather conditions Maintain excellent customer service Must be able to pass a background, physical, and drug screen

Within our Tracy, CA manufacturing facility, we are seeking a highly qualified Maintenance Controls/PLC System Supervisor on our Plant technical team to continue moving our organization to even larger levels of maintenance, controls optimization, and production efficiencies. We take pride in our vision to be "world's best", it's why we work harder, invest more, and continually innovate. At Leprino Foods, starting compensation for this role typically ranges between $100,000-$120,000. This position has an annual target bonus of 10%. Responsibilities: The Industrial/Maintenance Controls System Supervisor provides guidance and direction to a team of employees in the Maintenance Controls department. Makes strategic and sound decisions pertaining to industrial controls, department safety, and department efficiency for team. Monitors controls systems of the plant related to production processes and overall plant facilities, and develops plans to provide preventative modifications to maximize equipment uptime, plant efficiencies, product quality, safety, and cost control. Builds an effective employee team by engaging, mentoring, and developing direct reports. Plans and schedules daily staffing needs to maximize labor efficiency and ensure maintenance controls needs are met. Leads and coaches team employees by implementing programs in technical training, safety, quality, communications, performance recognition and internal employee development to drive peak employee engagement and productivity. Builds and fosters strong working relationships, collaboration within their team, and a positive work environment. Engages, mentors, and develops direct reports. Supervises the daily shift activities to minimize production downtime related to controls systems, work orders, and planned controls upgrades or modifications. Prioritizes controls programming needs to minimize production downtime, while assuring safety and quality. Must be knowledgeable of all plant processes and the equipment involved in order to best trouble-shoot and solve maintenance problems, primarily in the controls / PLC area. Provide guidance and direction to a team of employees in the Maintenance Controls department. Make strategic and sound decisions pertaining to industrial controls, department safety, and department efficiency for team. Monitor controls systems of the plant related to production processes, overall plant facilities and develops plans to provide preventative modifications to maximize equipment uptime, plant efficiencies, product quality, safety, and cost control. Assist with achieving departmental objectives and company goals in relation Controls department. Perform preventative maintenance on the defined devices/equipment with the intent to optimize equipment reliability. Lead troubleshooting of production problems on a timely basis until successful resolution, including major and minor maintenance of automated and non-automated equipment. Monitor and replace automation hardware devices and electrical equipment as needed. Manage, develop, and execute training to all levels of employees. Support a continuous 24/7 manufacturing operation. You Have at Least (Required Qualifications): Associates Degree in Controls Engineering, Industrial Technology, or a similar maintenance subject area. Five years of industrial controls experience although applicable education may substitute experience. Familiarity with SAP, Maximo, or other manufacturing computer systems. We Hope You Also Have (Preferred Qualifications): Experience reading & understanding Allen Bradley/Wonderware, ladder logic and P&ID loops. Experience in PLC/SLC development and programming. Dairy/Cheese manufacturing experience. People leadership experience in manufacturing environment. Leprino Foods celebrates and supports diversity. We believe in equal opportunity and do not discriminate on the basis of race, religion, ethnicity, national origin, gender, sexual orientation, age, marital status, veteran status, or disability. We know we are better together and are committed to creating an inclusive and supportive culture that uses the unique talents, experiences, background, and perspectives of each individual employee. Offering You In Return: A chance to be part of a global team of individuals passionate about producing and delivering high-quality products that help feed and nourish families around the world. Leprino Foods could not be where it is today without our incredible employees. That is why we share in our success together by rewarding you for your hard work. Hiring great people who are in it for the long run is our goal. Through competitive salaries and bonuses, life, medical/dental/vision coverage, voluntary benefits, employee assistance programs, wellness incentives, tuition assistance, vacation, ten paid holidays, sick time, paid parental leave, annual merit increases, as well as the LFC Profit-Sharing & 401(k) plan. Your impact will be noticed and rewarded, as you seek to further our company, our customers, and one another. The Easy Apply option through LinkedIn is not considered an official application with Leprino Foods. If you would like to formally apply for this open position, please visit careers.leprino.com.

Job Summary: The Part-Time Utility Technician is an entry level role. They will work closely with experienced shop and field techs and assist them as needed. They may be asked to perform repairs based on their skill set. Job Responsibilities: Perform daily and operational activities in the service department to include the following, but not limited to: Assist all service team members as needed Clean parts, scrape gaskets, prep for assembly Clean and prep all rental equipment Maintain safety and cleanliness of work environment Assist with lube truck work as needed Travel to jobsites and vendor training sessions as needed All other job duties as assigned by Service Manager, Rental Foreman, or Shop Supervisor Job Qualifications: Must have High School Diploma or equivalent. A technical degree or comparable military training is preferred Experience in the heavy equipment industry or a related field is a plus Excellent written and oral communication and basic mathematical skills. Proficient with a computer, including the use of Microsoft programs (Word, Excel, PowerPoint, etc.) and diagnostic use using manufacturer provided programs. Must have a working knowledge of equipment operations and mechanical functions. Ability to stoop, kneel, push, pull, twist and carry and lift up to 70lbs. Ability to climb and perform work on heights of 15 feet Able to work in all types of weather conditions Maintain excellent customer service Must be able to pass a background, physical, and drug screen

: The Maintenance Lead troubleshoots, repairs, maintains, and installs HVAC and related equipment as assigned, and assumes day-to-day coordination of specific agreements or projects as assigned to ensure contractual commitments are met in a timely, cost effective manner. **Pay: $28.85 per hour.** The pay listed is the hourly range or the hourly rate for this position. A specific offer will vary based on applicant's experience, skills, abilities, geographic location, and alignment with market data. **Schedule** : Monday-Friday 7:00am-3:30pm & on call for emergencies. **Benefit Information** : ABM offers a comprehensive benefits package. For information about ABM's benefits, visit ABM Employee Benefits | Front Line Team Members (******************************************************************************************************************** | (Programa de Beneficios de ABM) **Basic Qualifications** : - Must be 18 years of age or older - Must possess valid, unexpired driver's license - High School Diploma, GED or suitable equivalent is required **Preferred Qualifications** : - One (1) year of prior HVAC mechanical technician experience is preferred - One (1) year of prior lead or supervisory experience is preferred **Responsibilities** : - Maintain records of technical knowledge regarding equipment and concepts - Handle heavy workload of calls - Inform customer when arriving at or leaving the job and when planning to return - Manage workload and job scheduling - Promptly and accurately complete all required paperwork - Obtain customer signature on all service reports (before work begins when performing spot jobs) - Keep manager informed of customer feedback - Communicate effectively and promptly - Provide technical training and knowledge as needed to client, customer and team - Collaborate with and across multiple departments and representatives within the Company - When the Supervisor is present, the lead worker may also be responsible for directing smaller work groups - Report team performance issues to the Supervisor A good job for someone just entering the workforce or returning to the workforce with limited experience and education. ABM is a military and veteran friendly employer, veterans and candidates with military experience encouraged to apply. Military Occupational Specialty Code: 91C, UT, MK, 1161, 3E1X1 \#350 REQNUMBER: 139915 ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call ************. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis.

Maintenance Supervisor (Manufacturing) - Clinton, NC Kelly is seeking a maintenance supervisor to join a high-output manufacturing site in Clinton, NC that produces rendered fats and protein meals, along with other by-product streams. This Maintenance Supervisor will lead the day-to-day maintenance function to keep equipment reliable, reduce downtime, and support safe, consistent production. This is a hands-on leadership role in a fast-paced manufacturing setting. You'll spend time on the floor supporting the team, coordinating work, and responding to equipment needs. This is 2nd shift and you'd typically work 2:30p-12:30p Mon-Fri and work a rotational weekend schedule. On weeks where you work weekends, you would receive between 20-30% salary incentive based on how many hours. Pay is between $80k-95k salary. You will oversee up to 25 technicians. Would train on first shift for about a week. What you'll be responsible for Lead and develop a team of Maintenance Mechanics and Electricians (coaching, training, accountability, and performance support). Own reliability: preventive/predictive maintenance, troubleshooting, repairs, and continuous improvement to improve uptime and efficiency. Plan and schedule maintenance in partnership with Production; prioritize work orders and ensure the right resources are in place. Drive root cause problem-solving on equipment failures and recurring issues-implement corrective actions that stick. Maintain documentation and compliance: accurate work records, parts usage, inventory controls, and adherence to USDA-related requirements. Track and communicate performance using KPIs such as equipment reliability, overall equipment effectiveness (OEE), and contractor/vendor performance. Step in when needed to ensure continuity during coverage gaps or urgent events. What we're looking for Bachelor's degree in Engineering (or related) and 2+ years relevant experience, or an equivalent combination of education and experience. Prior experience leading others (formal supervisor or lead role-training, coaching, mentoring, or running a process/project). Strong troubleshooting and problem-solving skills in a manufacturing environment. Solid communication skills and comfort working cross-functionally. Working knowledge of Microsoft Office. Flexibility to support off-shifts, extended hours, and occasional weekends as needed. Preferred / nice-to-have Experience with any of the following: ammonia refrigeration, high-pressure boilers, compressed air, PLCs/instrumentation, mechanical/electrical troubleshooting. Familiarity with CMMS/work orders, preventive/predictive programs, TPM, and maintenance planning/scheduling tools. Proven leadership strengths: conflict resolution, decision-making, delegation, and change management. Bilingual skills.

Under minimal supervision, installs, repairs, and maintains the following machine manuals, prints, or by referral to building codes: Physical structures. Electrical wiring. Plumbing and fixtures. HVAC Includes motor and engine, CNC, electrical, pneum Maintenance Technician, Technician, Maintenance, Manufacturing, Property Management

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties/Responsibilities: Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. Identifies and sources parts, supplies, and repair items as necessary. Independently performs maintenance as per industry standards. May be required to set up and operate multiple machining operations, including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. Complies with 5S and housekeeping standards. Drives and participates in CI activities - processes, results, and cost savings. Updates records and reviews CMMS history. Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems. Utilizes predictive maintenance technologies to collect equipment performance data. Provides assistance to lower-level technicians and leadership to small teams. Performs more advanced functions as part of training and development. Completes on-the-job and technical self-study programs for career development. Follows all safety-related policies, rules, regulations, technical instructions, and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: High School Graduate or equivalent (GED). Associate's degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry, or successful completion of the ATS Technician Progression Program. Understands electrical, mechanical, fluid power, and control systems. Can analyze problems and perform repairs. Must be able to use basic hand tools and specialized tools as appropriate May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religin, sexo (incluido el embarazo, identidad de gnero y orientacin sexual), origen nacional, discapacidad, estatus de veterano, informacin gentica u otro estatus legalmente protegido. Revisin de la poltica de privacidad aqu here.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties/Responsibilities: Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. Identifies and sources parts, supplies and repair items as necessary. Independently performs maintenance as per industry standards. May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. Complies with 5S and housekeeping standards. Drives and participates in CI activities - processes, results and cost savings. Updates records and reviews CMMS history. Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems. Utilizes predictive maintenance technologies to collect equipment performance data. Provides assistance to lower level technicians and leadership to small teams. Performs more advanced functions as a part of training and development. Completes on-the-job and technical self-study programs for career development. Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: High School Graduate or equivalent (GED). Associates degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry or successful completion of the ATS Technician Progression Program. Understands electrical, mechanical, fluid power and control systems. Can analyze problems and perform repairs. Must be able to use basic hand tools and specialized tools as appropriate May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religin, sexo (incluido el embarazo, identidad de gnero y orientacin sexual), origen nacional, discapacidad, estatus de veterano, informacin gentica u otro estatus legalmente protegido. Revisin de la poltica de privacidad aqu here.

Job Title: Enhanced Building Maintenance Team - General Technician Department: Enhanced Building Maintenance Reports to: Enhanced Building Maintenance Team Supervisor Salary Level 6: $60,588 FLSA Status: Non - Exempt We are seeking a General Maintenance Repair Technician to join our team. Your primary responsibility will preventative and corrective maintenance to various customer facing systems and fixtures that include but is not limited to automatic soap dispensers, faucets and flush valves, paper dispensers, door latches and locks and other miscellaneous repairs across the public areas of the CPTC. Scheduled hours will be centered around 3rd shift primarily with a need to adjust depending on requirements or needs. Responsibilities: The following is a list of duties and expectations within the role: • Adhere to all safety policies and procedures without exception. • Repair and maintain a variety of customer facing systems and equipment. • Maintain work complete and service records for all equipment. • Coordinate and prioritize workload with your supervisor. • Operation of forklift machinery. • Perform other duties as assigned by your supervisor. Skills & Requirements Qualifications and Requirements: • High school diploma or GED preferred. • Must be able to read and write English proficiently. • Minimum of 3 years of experience in a general maintenance or repair environment, plumbing and electrical experience is a plus. • Experience in failure analysis and determining the best repair methods. • Safely and effectively use a variety of hand and power tools. Working Conditions: • Must have a valid GA driver's license and driving record void of recent major moving violations. • Must successfully pass a background check for insurance and security processes. • Must be able to pass a physical agility test. • Ability to lift to 75 pounds and handle a variety of tools, equipment, and supplies. • Most of the workday will be spent standing. • Some outdoor work can be required in all weather conditions. • Hazardous materials handling. • Occasional shift variance to include weekend or holiday work as required. • Steel-toed shoes must be worn on duty. Additional Qualifications: • Commitment to safety, quality, and meeting departmental goals. • Strong interpersonal skills to build relationships with customers, tenants, contractors, and AATC Staff. • Must be a team player and demonstrate strong organizational skills. This position is in Atlanta, GA. Atlanta Airlines Terminal Company is an Equal Opportunity Employer offering competitive compensation and an excellent benefits package. Qualifications

Maintenance Mechanic - 2nd Shift Conducts machine setup, troubleshooting, repairs, and preventive maintenance service. Responsibilities Provides emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service. Prepares and sets up machinery for scheduled production runs. Performs mechanical skills including, but not limited to, mechanical, electrical, pneumatic, and hydraulic troubleshooting and repair of packaging and production machines. Reads and interprets equipment manuals and work orders to perform required maintenance and service Diagnose problems, replace, or repair parts, test, and adjust. Perform regular preventive maintenance on machines, equipment, and plant facilities. Perform a variety of plumbing maintenance and electrical functions. Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties. Detect faulty operations, and defective material, and report those and any unusual situations to proper supervision. Comply with safety regulations and maintain clean and orderly work areas. Perform other duties as assigned or needed. Qualifications One-year certificate from college or technical school, six months to one-year related experience, or equivalent combination of education and experience Technical training; exposure to meat processing equipment 2 years of related experience in food strongly preferred Strong organizational skills Excellent written and verbal communication skills Ability to understand and follow written and verbal instructions Physical Demands and Work Environment: Work is performed in an office environment. The noise level in the work environment is usually moderate. The work environment characteristics described here are representative of those individual encounters while performing the essential functions of this position. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Fair Oaks Foods assures equal employment opportunity in all its hiring and employment policies and practices, which include all aspects of employment, such as recruiting, hiring, promotions, transfers, demotions, layoffs or terminations, compensation, benefits, training, company-sponsored education, social and recreational programs or events, and all other terms, conditions, and privileges of employment. These policies and practices are administered without regard to “legally protected categories” such as: race, color, religion, national origin, age, gender, disability, marital status, veteran status, sexual orientation or sexual orientation, pregnancy status or medical conditions related to childbirth, and/or any other factor protected by law.

What will you be doing? Preventative maintenance and repair of mechanical, electrical, and Habasit specific equipment. 's opportunities: Direct hire opportunity Eligible for bonuses and incentives $500 bonus after 90 days of employment $500 additional bonus after 180 days of employment $1000 additional bonus after 365 days of employment $750 referral bonus after 6 months Qualifications Must be 18 years of age Must be cleared on any background screening English literacy High School Degree or GED Maintenance Experience (Trade School, Previous Employment, Certificates, etc.) High Competency of pneumatic and hydraulic components Knowledge of Basic Electrical / Electronic Circuits and Wiring Read and understand Mechanical Blueprints Ability to use a calculator and a tape measure. Intermediate computer skills. Must have working knowledge of OSHA safety requirements. Knowledge and/or skills for Metal Fabrication (Mig, Tig, Grinders, Saws, Tap-n-Die, etc.) Why should you join our team? Our amazing environment keeps safety as its top priority! You can enjoy a collaborative atmosphere in a clean and climate-controlled facility. Our core values is how we thrive, and you will get to work with people who share them: Organizational Pride, Highest Ethical Standards, Quality You Can Trust, Collaboration, Entrepreneurship, and Continuous Improvement. Our opportunities to advance give any qualified associate the opportunity to move to a higher-level job. Our on-the-job training and skills development will ensure your success in your job. Our competitive pay rate $28.00/Hr - $33.00/HR If you are interested in becoming a part of a World-Class Team, submit your application today! OVERVIEW OF POSITION: Repairs equipment and programs PLC's, including automated machines, controls, panels, relays, circuit breakers, communication systems and alarms. Installs electrical equipment with minimal instructions. FIRST SHIFT IS MANDATORY FOR THE FIRST 6 MONTHS OR UNTIL TRAINING IS COMPLETED. RESPONSIBILITIES OF THIS POSITION: Level 1 Duties · Operate electrical hand tools as well as voltage, ampere and temperature measuring devices. · Work from blueprints, drawings, sketches or layouts. · Diagnose problems in order to replace or repair parts/machinery as required. · Operate and maintain basic Maintenance Department equipment and machinery. · Perform scheduled preventive maintenance as directed. · Troubleshoot and repairs equipment. · Assemble, fabricate and install parts, equipment and machinery. · Notify maintenance management of any abused and or misused equipment and/or machinery. · Notify maintenance management of shortage of supplies. · Participate in problem solving teams. · Follow all housekeeping and safety regulations. · Fill out necessary paperwork. (eMaint program, RMA documentation, Tool Repair, etc.) · Manage assigned workload and prioritize to minimize productivity losses. · Perform Lockout / TagOut procedures as a Habasit "Authorized Associate". · Assist other maintenance personnel. · Perform janitorial duties as directed. (Housekeeping, machine cleaning, facility cleaning, etc.) · Perform snow removal. · Perform grounds keeping tasks as directed. · Is on call to come to work during off shift hours to help out in emergency situations. · Any other duties as assigned. Level 2 Duties · Perform complex wiring assignments. · Install and repair power, lighting, and electronic control circuits. · Provide technical assistance to lower level maintenance electricians. · Improve and maintain preventative maintenance program for Habasit assets. · Repair and maintain equipment as needed and/or as directed by PM schedule. · Ability to program PLC in Siemens and Allen Bradley format. · Maintain OSHA compliance and records for site and equipment. · Work with vendors to produce parts for machines and maintain spare part inventory. · Maintain building and all maintenance contracts, such as cleaning services, landscaping, etc. · Install any additional utility extensions and networking services. · Any other duties as assigned. COMPETENCIES/SPECIFIC EXPERIENCE OR TRAINING PREFERRED: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements/preferences listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Required - High School Degree or GED · Required - Maintenance Experience (Trade School, Previous Employment, Certificates, etc.) · Required - High Competency of pneumatic and hydraulic components · Required - Knowledge of Basic Electrical / Electronic Circuits and Wiring · Required - Read and understand Mechanical Blueprints · Required - Read, Write and Comprehend English. · Required - Minimum of five years maintenance experience/preventative maintenance program facilitator. · Required - Program PLC in both Siemens and Allen Bradley format. · Preferred - Knowledge and/or skills for Metal Fabrication (Mig, Tig, Grinders, Saws, Tap-n-Die, etc.) · Preferred - Associates Degree in Related Field. · Preferred - Intermediate computer skills. · Preferred - OSHA electrical certification. · Preferred - Must have working knowledge of OSHA safety requirements. · Required - Ability to use a calculator and a tape measure. Education: High school or equivalent (Required) Experience: Industrial maintenance: 5 years (Required) Mechanical knowledge: 5 years (Required) pneumatics: 5 years (Required) Hydraulics: 5 years (Required) Electrical wiring: 5 years (Preferred)

ABM (NYSE: ABM) is one of the world's largest providers of integrated facility, engineering, and infrastructure solutions. Every day, our over 100,000 team members deliver essential services that make spaces cleaner, safer, and efficient, enhancing the overall occupant experience. ABM serves a wide range of market sectors including commercial real estate, aviation, education, mission critical, and manufacturing and distribution. With over $8 billion in annual revenue and a blue-chip client base, ABM delivers innovative technologies and sustainable solutions that enhance facilities and empower clients to achieve their goals. Committed to creating smarter, more connected spaces, ABM is investing in the future to meet evolving challenges and build a healthier, thriving world. ABM: Driving possibility, together. ABM is an Equal Employment Opportunity (EEO) employer that does not discriminate on the basis of any trait or characteristic protected by applicable federal, state, or local law, including disability and protected veteran status. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call ************. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you'll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you're looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at ******************** ABM does not accept unsolicited resumes. For more information, visit *********** The Maintenance/Lead troubleshoots, repairs, maintains, and installs HVAC and related equipment as assigned, and assumes day-to-day coordination of specific agreements or projects as assigned to ensure contractual commitments are met in a timely, cost effective manner.

TITLE: FACLITIES MAINTENANCE TECHNICIAN A SHIFT: MONDAY THRU WEDNESDAY AND EVERY OTHER THURS FROM 6AM TO 6PM C SHIFT: FRIDAY THRU SUNDAY AND EVERY OTHER THURS FROM 6AM TO 6 PM D SHIFT: FRIDAY THRU SUNDAY AND EVERY OTHER THURS FROM 6:00 PM to 6:00 AM FLSA STATUS: NON-EXEMPT REPORTS TO: FACILITIES SUPERVISOR SUMMARY: Under the direction of the Facilities Supervisor, the Facilities Maintenance Technician is responsible for the scheduled and unscheduled maintenance and repair of all industrial equipment, including HVAC packaging units, chiller/cooling tower systems, boilers, fluid pumping systems, reverse osmosis and DI water systems, waste water treatment, and chemical delivery systems; overseeing the roof maintenance program, including inspection, cleaning or removing debris, and overseeing contracted services; performing all regular scheduled or unscheduled electrical, mechanical, and plumbing maintenance to the interior or exterior of the facility. This position is located in Milpitas, California. ESSENTIAL FUNCTIONS: Performs both scheduled and unscheduled electrical, mechanical, and plumbing repairs or maintenance to the interior or exterior of the facility Performs both scheduled and unscheduled maintenance of HVAC units, including packaging units, chiller/cooling tower systems; performs minor repairs to automation or environmental controls as needed Reads, understands, and interprets schematic drawings such as hydraulic, pneumatic, electrical, or plumbing diagrams Enters, updates, and tracks work orders using in-house software application to ensure standards for customer service are consistently met Uses power tools, calibration equipment, and other small hand tools to repair equipment, machinery, etc. Oversees contracted repair services for preventative maintenance of the facility, such as roof repairs, equipment, life safety, and general maintenance to the building Responds to requests from employees and departments regarding facilities-related issues or support Works scheduled and unscheduled overtime as required Adheres to all safety policies and procedures as required Performs other duties of a similar nature or level* MINIMUM QUALIFICATIONS: High School Diploma or GED Five years of experience working in facilities, construction, plumbing, or similar background in a technician role Industrial or Electrical Controls Systems Certification Preferred Proficient in the use of Microsoft Office Applications Knowledge, Skills, and Abilities: Knowledge and ability to perform routine electrical, mechanical, and plumbing maintenance and repair Knowledge and ability to use small hand and power tools to make repairs or perform maintenance Knowledge of HVAC systems, automation, and environmental controls Knowledge and ability to use Microsoft Office applications to create spreadsheets, Word documents, and presentations Able to communicate effectively, both verbally and in writing, with all levels of contractors, consultants, employees, and management Able to work productively and collaboratively with all levels of employees and management Able to comply with all safety policies and procedures Demonstrated organizational and time management skills Demonstrated problem-solving and trouble shooting skills Flexible and able to prioritize The hourly rate for this full-time position is between $27.82-$55.20 + bonus target + benefits. Within the range the individual pay may differ depending on additional factors including job responsibilities, job related knowledge, skills, abilities, education, and experience. The hourly pay range shown is subject to change and may be modified periodically. WORKING CONDITIONS: The Facilities Maintenance Technician works both indoors and outdoors on either A, C or D shift. The schedule may be altered from time-to-time to meet business or operational needs; may travel from building-to-building as needed. May occasionally work in a class 100 ESD sensitive wafer manufacturing facility; wears a cleanroom (bunny) suit, including hood, gloves, safety glasses, booties, and mask. May be exposed to hazardous conditions, chemicals, fumes, and/or gases during the course of work day; may be exposed to loud noise; may work in close proximity to moving mechanical parts. Stands and walks, bends, twists, and crawls; May occasionally be required to work in crawl spaces, shafts, or other areas that could cause claustrophobia. Performs various fine grasping movements; operates a computer and enters information using a keyboard, operates a telephone, and other office equipment; may occasionally drive a forklift. Responds to after hours emergencies as required. May occasionally push, pull, or lift up to 30 pounds. *Other duties of a similar nature or level are duties that may be required, but may not be specifically listed in the job description or posting. TDK/Headway Technologies, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability, or genetics. Applicants requiring accommodation in order to complete the application process should contact the Headway Human Resources Department.

Bridgestone Retail Operations (BSRO) is part of Bridgestone Americas and employs over 22,000 teammates in North America. BSRO operates more than 2,200 company-owned stores, including Firestone Complete Auto Care, Tires Plus and Wheel Works locations. With locations across North America and more than $4.5 billion in tire and auto service sales, Bridgestone Retail Operations is the right place to build a career. Whatever role you fill, when you represent the Bridgestone name, you are a valued teammate, and part of our larger mission to Serve Society with Superior Quality. We start by offering each teammate more than just competitive pay. We provide formal training, performance incentives, paid vacation and holidays, competitive healthcare packages for full-time and part-time employees, and a 401k plan to help build towards your future. We believe people can only provide superior service and quality to others when they are allowed to bring their whole self to work and know they are supported. We believe in championing all perspectives, individuals and teams because we understand the importance of seeing the world and our business through many different lenses. We are building a team as diverse as the world we serve. So, show us what you are made of. Show us the smart stuff, the tough stuff, the bold, beautiful and brave stuff. Because who you are is what we need. **Job Category** Retail **Position Summary** The Maintenance Technician is an entry level position in which you will be an integral part of a fantastic team servicing vehicles. STOP looking for a job and START investing in your career as a Maintenance Technician at Firestone Complete Auto Care! Full and Part-time benefits available from day one - including tool program discounts! Pay Range: $12.54 - $18.81 **Responsibilities** + Learn how to diagnose and repair basic automotive including brakes, alignments, suspensions, cooling, exhaust, and electrical. + Change oil and/or perform scheduled maintenance services. + Install and perform tire maintenance. + Install batteries, shock absorbers, and check electrical systems. + Road test vehicles. **Minimum Qualifications** + Ability to learn basic mechanical tasks. + Must have a valid automobile driver's license at all times and be able to drive customer and company vehicles. + Experience in automotive service industry preferred. + Reading, writing, and math skills. **OUR CREW KNOWS** **BENEFITS** + Medical, Dental and Vision - Starting day 1 for all our teammates + Paid vacation and holidays + On-the-job training and company-funded ASE certifications + Flexible work schedule + 401(k) match + On demand pay (daily pay) program available **OUR VALUES GIVE BACK TO** **YOU** + Professional Development: No matter where you're at in your career, we've got the resources to help you level up. + Community Involvement: We pride ourselves on working with our local communities and giving back where we can. + Integrity & Teamwork: Part of what makes our teams different is our drive to do things right, always, together. **At Bridgestone, you are Free to Be** We believe people can only provide superior service and quality to others when they bring their whole self to work. We believe in championing all perspectives, individuals and teams because we understand the importance of seeing the world and our business through many different lenses. We are building a team as diverse as the world we serve. So, show us what you are made of, because who you are is what we need. **What we offer** At Bridgestone, what really matters is to foster co-creation opportunities and empowering you to be creative and curious to make mobility safer, more efficient, and more sustainable for future generations. Whatever role you fill, when you represent Bridgestone, you are a valued teammate, and part of our larger mission to "Serve Society with Superior Quality", for that, we offer you more than just a competitive compensation; we will provide you: + A supportive and engaging onboarding experience to ensure a smooth transition into our team. + The opportunity to develop and grow, through training and regular mentorship. + Corporate Social Responsibility activities. + A truly global, dynamic and challenging work environment. + Agility and work/life effectiveness and your long-term well-being. + A diverse and inclusive team. _Bridgestone is proud to be an Equal Employment Opportunity employer. It is our policy to consider for employment all individuals regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, gender, sex, sexual orientation, gender identity and/or expression, genetic information, veteran status, or any other characteristic protected by federal, state or local law._ **Employment Eligibility** If hired, a Form I-9 Employment Eligibility Verification must be completed at the start of employment. Temporary work authorization or the need for sponsorship may disqualify you from employment.