Technician jobs at Holcim

• Diagnose unit repair needs and perform designated repairs on company and customer owned commercial generators/engines as directed. • Perform necessary troubleshooting and notify Service Manager of outstanding issues. • Expected to complete tasks with no/limited supervision. • Demonstrates extremely well developed technical and troubleshooting skills with strong analytical problem-solving skills in their work unit. • Demonstrates the need for continuous self-development and seeks every opportunity to improve their personal, technical, and interpersonal skills. • Verified findings, review readings of gauges and procedures and compare to manufactured specs. • Install, replace, rebuild, or repair the parts and/or equipment in a timely manner and according to specifications • Consistently follows all Foley safety policies and procedures to include all Personal Protective Equipment being worn at all times, as well as contamination control guidelines. • Willing to respond to after-hour emergency calls as directed by supervisor. • Test the part or equipment and perform quality checks after work is complete. • At the end of shift, secure all equipment and machinery and complete all required paperwork. • Basic computer skills and good interpersonal and communications skills. • The candidate must have a clean driving record and current driver's license. RECOMMENDED QUALIFICATIONS: • Minimum 3-5 years experience with Cat/Non-Cat power gen units. • Must be able to multitask. • Assist parts department in researching and ordering needed parts. • Strong Computer skills preferred, knowledge of SisWeb and ET. Equal Opportunity Employer Foley, Incorporated does not discriminate against any person applying for employment based on race, color, sex, age, religion, national origin or citizenship status, physical or mental disability, marital status, sexual orientation, gender identity, status as a covered Veteran, or any other legally protected status. This contractor and subcontractor shall abide by the requirements of 41 CFR 60.300.5(a) and 41 CFR 60.741.5(a). These regulations prohibit discrimination against qualified individuals on the basis of disability and protected veteran status, and require affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities and protected veterans.

• Diagnose unit repair needs and perform designated repairs on company and customer owned commercial generators/engines as directed. • Perform necessary troubleshooting and notify Service Manager of outstanding issues. • Expected to complete tasks with no/limited supervision. • Demonstrates extremely well developed technical and troubleshooting skills with strong analytical problem-solving skills in their work unit. • Demonstrates the need for continuous self-development and seeks every opportunity to improve their personal, technical, and interpersonal skills. • Verified findings, review readings of gauges and procedures and compare to manufactured specs. • Install, replace, rebuild, or repair the parts and/or equipment in a timely manner and according to specifications • Consistently follows all Foley safety policies and procedures to include all Personal Protective Equipment being worn at all times, as well as contamination control guidelines. • Willing to respond to after-hour emergency calls as directed by supervisor. • Test the part or equipment and perform quality checks after work is complete. • At the end of shift, secure all equipment and machinery and complete all required paperwork. • Basic computer skills and good interpersonal and communications skills. • The candidate must have a clean driving record and current driver's license. RECOMMENDED QUALIFICATIONS: • Minimum 3-5 years experience with Cat/Non-Cat power gen units. • Must be able to multitask. • Assist parts department in researching and ordering needed parts. • Strong Computer skills preferred, knowledge of SisWeb and ET. Equal Opportunity Employer Foley, Incorporated does not discriminate against any person applying for employment based on race, color, sex, age, religion, national origin or citizenship status, physical or mental disability, marital status, sexual orientation, gender identity, status as a covered Veteran, or any other legally protected status. This contractor and subcontractor shall abide by the requirements of 41 CFR 60.300.5(a) and 41 CFR 60.741.5(a). These regulations prohibit discrimination against qualified individuals on the basis of disability and protected veteran status, and require affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities and protected veterans.

The Blooming Glen Contractors, Inc. Water & Wastewater Services Division (BGC WWS), a partner of the H&K Group, Inc. is seeking a self-motivated full-time Lead Service Technician to join our team. The successful candidate will take charge of all facets of water/wastewater service; troubleshooting and repairing existing equipment as well as overseeing installation and start-up of new systems. The ideal candidate is safety focused, team oriented, and takes initiative. This position will service the Delaware, Maryland and Virginia area. Why work for H&K Group, Inc.? Competitive salary commensurate with experience 100% Company-paid Health Benefits 401(k) Savings and Investment Plan Tuition reimbursement programs available to qualifying employees for approved programs Additional training programs including on the job, online through H&K Academy, manufacturer offered training, and more Company-provided Service Vehicle for work travel and daily field assignments Responsibilities Essential Duties and Responsibilities Lead field crews in all aspects of water/wastewater mechanical equipment repairs and maintenance at both pump stations and water/wastewater treatment facilities. Troubleshoot mechanical and basic electrical issues on pumps, motors, blowers, and related process equipment. Must have basic knowledge in phases of general construction. Perform laser shaft alignment and vibration testing. Hands-on training available. Minor welding or fabrication as needed. Coordinate work with plant operators; provide clear status updates and mentor junior technicians. Ensure compliance with OSHA and confined-space safety protocols; complete service reports and daily logs. Operate a company-owned mechanic's truck (with crane) throughout the tri-state region; obtain/maintain DOT medical card. Participate in an on-call rotation for emergency response. Qualifications Required Skills, Education, and Experience 5+ years hands-on service experience in the water/wastewater industry, combining heavy mechanical work with practical electrical troubleshooting Must be comfortable working in and around wastewater environments Basic mechanical knowledge Able to lift and/or move up to 75 pounds Strong analytical and problem-solving skills Effective verbal and written communication skills Efficiency, accuracy, and responsibility Preferred Skills, Education, and Experience 3 years related experience Maintenance experience Experience in Wastewater services, heavy civil construction, or other heavy industry Certifications OSHA 40-hour Confined Space Entry CPR & First-Aid Technical Skill Set Solid working knowledge of pump station and treatment-plant processes and flows; mechanically inclined Able to read equipment manuals, schematics and blueprints Perform general welding and fabrication tasks Clear communicator, comfortable working side-by-side with plant personnel Self-motivated and organized Proficient with laser assignments and vibration analysis is a plus Training is available Mobility & Driving Valid driver's license and ability to secure DOT medical card for Delaware, Maryland, and Virginia Will routinely drive/operate a mechanic's truck with crane Physical Demands Occasionally required to: Stand, walk, sit, climb, balance, stoop, kneel, crouch, or crawl Talk and hear Lift and/or move up to 75 pounds Work Environment Occasionally exposed to: Moving parts Fumes and/or airborne particles Extreme heat Risk of shock Inclement/outdoor weather Noise level is loud at times The Blooming Glen Contractors, Inc. Water & Wastewater Services Division (BGC WWS) utilizes both a nationally recognized staff of mechanical professionals and the latest in equipment and technology to construct or remediate virtually any water or wastewater repair situation. Serving the needs of the municipal, industrial, commercial, and institutional sectors since 2009, BGC WWS provides superior quality, efficiency, and timely performance to all our clientele. We also offer custom fabrication services for any atypical projects, with the capacity to provide complete design-build services. H&K Group, Inc. provides complete heavy civil contracting and construction materials solutions with safety, speed, quality, efficiency, and value. Beginning as a small family business a half century ago, we are now a dynamic group of vertically integrated companies that has been growing and prospering for 50 years. Thank you for your interest in employment with H&K Group, Inc. At H&K, we invest in our people, providing the essential training, instruction, and supervisory support that they need to develop and grow within our company. We acknowledge that H&K's strength and success is directly related to our employees and the talents, dedication, and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference. H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Pre-employment Physical 100% Company-Paid Health Benefits! We can recommend jobs specifically for you! Click here to get started.

Description: The Automation Technician is responsible for performing routine maintenance on industrial equipment, including but not limited to electric forklifts, racking, dock & doors, scissor lifts, tuggers, floor scrubbers, golf carts., Robotics, Conveyor systems, case sealers & erectors. 3 Years Minimum Experience in Automation a must! Must have own tools, strong technology skills, strong office skills, self-motivated, organization skills, great communication skills, relationship building skills, team building skills, and works well under pressure in all situations. And able to work assigned schedule. Will be responsible for the following: Point of contact for customers Performing and completing PMs & repairs. Facilitate work/Repair request. Provide shift coverage & fill in for PTO request. Willing to be On Call Communicate PTO coverage plans with direct supervisor & or customers. Coordinate and drive warranty requests Facilitate outside vendor work (PO process and billing) Facilitate all outside of scope work. Parts Ordering and Inventory Management (5S Inventory Skills) Fill out and complete daily work orders. Attend and complete Monthly safety training requirements. Troubleshoot equipment failures, including root cause analysis. Including research of potential warranty, rework and continuously repetitive repairs using historical equipment data available through Field Connect service platform. Complete all repairs of equipment in a timely manner and by the manufacturer's repair guidelines. Judgment and Decision Making - Consider the relative costs and benefits of potential actions to choose the most appropriate course of action. Inspecting Equipment - Perform audits on equipment audits per the PM Planning tools schedule in Field Connect service platform. Communications - Provide information to supervisor and co-workers by phone, in writing, e-mail, or in person. Timely and accurate completion of all work orders and service records per the Concentric time standard. Maintain accurate and timely entry of work hours in Paylocity time keeping platform. Safety All work must be completed in a safe manner. Safety requirements by customer and Concentric must be adhered to. Work areas will be maintained to ensure safety. Work areas will be kept clean and organized daily. Timely Completion of Safety training modules. Other duties as assigned by supervisor. Key Performance Measurements: A score card that reflects performance in areas such as: PM Completion Tech Efficiency Customer Satisfaction Inventory Variance Work in Progress Safety Shop Cleanliness & 5S Management observation regarding attitude, diligence, team contributions, and willingness & ability to learn new skills and information. Other key performance indicators as assigned. Requirements: High School or GED Diploma required. Must have a minimum of 3 years of Automation experience. Strong Electrical troubleshooting skills, 480v,240v,24v, 48v. Able to read electrical schematics, wiring diagrams, hydraulic diagrams, pneumatic prints. Ability to organize his/her own work and work independently, with limited supervision. Ability to work with individuals from diverse backgrounds and with diverse needs, and across remote offices. Strong Mechanical troubleshooting skills. Basic plumbing skills. Basic handyman skills. Minimum 5 years' experience as an Automation Tech/forklift technician/automation bots/technology savvy. Experience with Electric Forklifts (Crown preferred). Must understand how to troubleshoot and diagnose electrical components involving wiring diagrams and schematics, general abilities in laptop software to identify issues with automation equipment going offline. Manufacturer Training available on specific equipment for technician hired. Looking for someone with a strong skillset who is willing to learn, self-motivated, goal oriented, punctual, and professional, strong communication skills, solution-based mindset who is looking to grow . Specialty tools will be provided but must have own hand tools and willing to purchase what is needed to be successful in the role. Strong technology skills, strong office skills, self-motivated, organization skills, great communication skills, relationship building skills, team building skills, and works well under pressure in all situations. Must be able to pass pre-employment requirements. ELECTRICAL- 480V, VFD's, Relays, Motor Controls, electric motors, HMI's, Contactors, Timers, Proximity Sensors/Switches, Electro-Mechanical background, Industrial Batteries. Allen Bradley PLC experience a plus! Mechanical- Gear boxes, Chains, Sprockets, MHE Equipment/Electric Forklifts, Hydraulic systems, Dock, and Door experience. Arc, Mig, and Tig welding experience preferred. *This job description is subject to change at any time. Benefits At Concentric we believe that Our People are what make us great and help us deliver exceptional customer service! We offer industry leading Benefits to include: Competitive pay - Plus incentive opportunities and overtime potential! Full benefits package that starts day one - Includes medical, dental, vision, company-paid life insurance and disability coverage. 401K with match 8 paid holidays Full-time Employees receive 128 Hours of PTO Annually Training and mentoring - Learn from our experts in the industry. Advancement opportunities. The benefits listed are subject to change at any time. Please speak with an HR Representative for details. In the case of conflict between the information listed and the official plan documents, the plan documents will always govern. Concentric is the first national industrial power services organization delivering forklift and critical power as well as maintenance solutions that ensure uninterrupted, sustainable facility power. The company's signature solutions, Guaranteed POWER and Perpetual POWER are industry firsts, improving reliability, sustainability, and safety to solve the power problem for facility leaders. Concentric helps data centers, distributors, manufacturers, utilities, communications infrastructure and more develop resilience in their power systems while making the energy transition with less risk. With a national network of service professionals, Concentric provides engineering, installation and maintenance/management for power equipment including backup batteries, UPSs, generators, energy storage, micro grids, forklift power, onsite maintenance and more. Learn more at concentricusa.com. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, walk, up to 8 hours; use hands to lift, maneuver, handle, or feel; and talk or hear. The employee frequently is required to walk and reach with hands and arms. The employee is occasionally required to stand and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 100 pounds. While performing the duties of this job, the employee may be required to wear approved Personal Protective Equipment (PPE) and must maintain a high level of self-awareness about their surroundings. Specific vision abilities required by this job include close vision and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The work is performed primarily in customer facility location. The noise level in the work environment is moderate to heavy, occasionally requiring hearing protection. The Concentric Company considers applicants for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, genetic information, marital or veteran status, or any other legally protected status.

Job Description Job Title: Maintenance Technician/General Maintenance Department: Maintenance Reports To: Property Manager/Maintenance Supervisor Hours: Monday - Friday 8:00am - 5:00pm Compensation: $22 - $28 Hourly + Benefits (based on experience and certifications) SUMMARY Perform minor building, HVAC, plumbing, electrical and painting repairs as necessary Implement preventative maintenance measures Maintain inventory of repair equipment and supplies Complete inspections of buildings, units, office and amenity space as needed Respond quickly in the event of an emergency, notify appropriate personnel and follow safety protocol Perform other maintenance duties as requested CLEAN CRIMINAL BACKGROUND REQUIRED ESSENTIAL DUTIES AND RESPONSIBILITIES includes but is not limited to the following: Report directly to Maintenance Supervisor (if available - on staff) otherwise to Property Manager/Assistant Property Manager. This position is responsible for the maintenance and repair of mechanical equipment and building repair in a multifamily housing environment. - Ability to work with and repair drywall and paint drywall surfaces. - Perform basic maintenance tasks and general repairs including plumbing, roofing, appliance moving and repair. - Maintain common areas and grounds of the property. - Must be able to access and inspect property grounds by way of climbing ladders, stairwells, rooftops, confined areas, etc. - Perform troubleshooting, repairs and preventative maintenance, renovating and preparing vacant units to move in condition, outdoor grounds maintenance and property appearance. - Candidates must possess basic hand tools, valid drivers license and have their own transportation. - Maintains building, performing routine painting, plumbing, electrical wiring, and other related maintenance activities as needed. QUALIFICATIONS AND PREFERRED SKILLS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Must have good communication skills. Must have basic knowledge of construction and repair processes. Must have a valid driver's license, own transportation and tools. - High school diploma/GED required - Physical strength and dexterity to lift, move and handle equipment. - General maintenance knowledge and construction skills. - Ability to comprehend instructions furnished in written, oral, or diagram form. - Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedural manuals. - Exhibits behaviors of honesty, commitment to goal achievement and effective relationships with colleagues - Self-starter with the ability to quickly adapt to new circumstances as they arise - Ability to prioritize tasks and follow specified procedures EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); or at least six months related experience and/or training; or equivalent combination of education and experience. CERTIFICATIONS: Must have a valid drivers license & own vehicle. Clean background required. LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to speak effectively after groups of customers or employees of organization. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems and find solutions within company protocol. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Heavy lifting is required. While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to climb or balance; stoop, kneel, crouch, or crawl; and taste or smell. Must be physically capable of lifting a minimum of 50 pounds unassisted. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Full Time Employment Benefits: Capano Residential offers competitive compensation and benefit package which includes: medical, dental, vision, life insurance, and disability benefits. Medical, Dental & Vision 401k Match Life Insurance Paid Time Off (Vacation/Personal/Sick Time) 401(k) 401(k) matching Dental insurance Employee discount Health insurance Health savings account Life insurance Paid time off Vision insurance Schedule: Monday to Friday Ability to commute/relocate: Newark, DE 19702: Reliably commute or planning to relocate after starting work (Required) Application Question(s): Experience: Maintenance: 1 year (Preferred) Mechanical knowledge: 1 year (Preferred) License/Certification: Driver's License (Required) Work Location: In person

Job DescriptionDescription: Are you a skilled mechanic or technician looking to take your career to the next level? Kinsley Power Systems is hiring Field Service Technicians to service stand-by generators throughout the Northeast. If you have experience with engines, electrical systems, or heavy equipment-especially in automotive, trucking, marine, or construction-you may already have what it takes to thrive in this role. We offer specialized training to help you transition into the power generation industry and build a long-term, rewarding career. Kinsley Power Systems, a family-owned business, has been a trusted leader in generator service, sales, and rentals for over 60 years. We're committed to exceeding customer expectations in a workplace that's both enjoyable and supportive-where your hard work is recognized and your growth is prioritized. Key Responsibilities and Preferred Experience: Performing preventative maintenance and repairs on standby generator systems (Ranging from 8kW-1mW) Troubleshooting, diagnostic testing, load-bank testing and start-ups on generators Preparing accurate quotes for repairs and completing/submitting work orders Previous experience working on residential or industrial generators Exceptional communication and customer service skills The ability to participate in an on call, rotating schedule Must provide your own tools (multi-meter, hand-tools, etc.) Very safety focused with an OSHA 10 (or the ability to attain one) Valid DOT Card (or the ability to attain one) and a valid driver's license Benefits: Competitive pay and PTO to keep your work-life balance in check Full health benefits package (Medical, Dental, Vision, etc.) + 401(k) with match Company-paid certifications and specialized training to grow your skills Company vehicle and gas card so you're always ready to roll Uniforms provided, plus annual boot and uniform stipends Real advancement opportunities-grow your career with a team that wants to see you succeed A chance to work alongside some of the best technicians in the industry in a company that feels like family All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. Requirements:

$1,500 Employee Referral Bonus Eligible Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials, including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. What You'll Do: Promote Safety. In accordance with MSHA and Vulcan standards, take an active role in prioritizing safety throughout the operation for yourself and others at all times. Repair and Maintain Mobile Equipment. Lubricate, clean, and perform other small services on heavy mobile and stationary equipment to maximize performance and limit downtime. Inspect Equipment and Material. Inspect all mobile equipment to identify and schedule equipment services based on the company and manufacturer's recommendations. Routinely perform oil samples, interpret results, and make recommendations based on analysis. Document and Record Information. Ensure that correct and accurate documentation regarding all equipment is completed daily and monthly. Enter and maintain service reports for all the equipment in written or electronic form. Handle and Move Objects. Safely handle, install, position, and move parts, materials, and industrial hand tools throughout the shop and plant. Perform General Physical Activities. Perform physical activities that require moving your whole body and considerable use of your arms and legs, such as climbing, lifting, balancing, walking, stooping, and handling materials. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Experience. Previous experience working on diesel or heavy construction equipment is preferred-prior experience with CAT SIS or ET programs is highly desired. Knowledge of Best Practices. Knowledge of general principles and practices of servicing heavy construction equipment is preferred. Working Ability. Must be willing to work overtime and extended hours depending on customer and company demands. Must be able to work outside in all types of weather conditions and tolerate being exposed to loud noises. Mechanical Skills. Must have some knowledge of industrial tools, their uses, and maintenance. What You'll Like About Us: Hourly Range. The hourly range for this role is between $23.62 and $35.05. This range does not include our discretionary bonus, shift differential, or equity package. When determining a candidate's compensation, we consider several factors, including skillset, experience, job scope, and current market data Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. We are an industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do, which impacts daily lives, and every employee contributes. Our aggregates are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES, AND PROFESSIONAL RECRUITERS: Vulcan Materials Company has an internal recruiting department. Please review our policy regarding using temporary staffing agencies, placement services, and professional recruiters.

Perform high-quality repair and maintenance on Caterpillar equipment. Diagnose and troubleshoot mechanical, electrical, and hydraulic issues. Expected to complete tasks with no/limited supervision. Remove, install, disassemble, and assemble components. Adhere to safety standards to include contamination control and HAZMAT regulations. Verified findings, review readings of gauges and procedures and compare to manufactured specs. At the end of shift, secure all equipment and machinery and complete all required paperwork. Willingness to learn and adapt to new technologies and procedures. RECOMMENDED QUALIFICATIONS: Experience with Cat/Non-Cat construction equipment. Must be able to multitask. Assist parts department in researching and ordering needed parts. Strong Computer skills preferred, knowledge of SisWeb and ET is a plus. Excellent communication and interpersonal skills. Well-developed technical and troubleshooting skills with strong analytical problem-solving skills. Equal Opportunity Employer Foley, Incorporated does not discriminate against any person applying for employment based on race, color, sex, age, religion, national origin or citizenship status, physical or mental disability, marital status, sexual orientation, gender identity, status as a covered Veteran, or any other legally protected status. This contractor and subcontractor shall abide by the requirements of 41 CFR 60.300.5(a) and 41 CFR 60.741.5(a). These regulations prohibit discrimination against qualified individuals on the basis of disability and protected veteran status, and require affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities and protected veterans.

Perform high-quality repair and maintenance on Caterpillar equipment. Diagnose and troubleshoot mechanical, electrical, and hydraulic issues. Expected to complete tasks with no/limited supervision. Remove, install, disassemble, and assemble components. Adhere to safety standards to include contamination control and HAZMAT regulations. Verified findings, review readings of gauges and procedures and compare to manufactured specs. At the end of shift, secure all equipment and machinery and complete all required paperwork. Willingness to learn and adapt to new technologies and procedures. RECOMMENDED QUALIFICATIONS: Experience with Cat/Non-Cat construction equipment. Must be able to multitask. Assist parts department in researching and ordering needed parts. Strong Computer skills preferred, knowledge of SisWeb and ET is a plus. Excellent communication and interpersonal skills. Well-developed technical and troubleshooting skills with strong analytical problem-solving skills. Equal Opportunity Employer Foley, Incorporated does not discriminate against any person applying for employment based on race, color, sex, age, religion, national origin or citizenship status, physical or mental disability, marital status, sexual orientation, gender identity, status as a covered Veteran, or any other legally protected status. This contractor and subcontractor shall abide by the requirements of 41 CFR 60.300.5(a) and 41 CFR 60.741.5(a). These regulations prohibit discrimination against qualified individuals on the basis of disability and protected veteran status, and require affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities and protected veterans.

Job Description Job Title: Residential Maintenance Technician Department: Maintenance Reports To: Property Manager/Maintenance Supervisor Hours: Monday - Friday 8:00am - 5:00pm On Call: Some Nights/Weekends Required Compensation: $22 - $28 Hourly + Benefits (based on experience and certifications) SUMMARY Perform minor building, HVAC, plumbing, electrical and painting repairs as necessary Implement preventative maintenance measures Maintain inventory of repair equipment and supplies Complete inspections of buildings, units, office and amenity space as needed Respond quickly in the event of an emergency, notify appropriate personnel and follow safety protocol Perform other maintenance duties as requested CLEAN CRIMINAL BACKGROUND REQUIRED ESSENTIAL DUTIES AND RESPONSIBILITIES includes but is not limited to the following: Report directly to Maintenance Supervisor (if available - on staff) otherwise to Property Manager/Assistant Property Manager. This position is responsible for the maintenance and repair of mechanical equipment and building repair in a multifamily housing environment. Perform troubleshooting, repairs and preventative maintenance, renovating and preparing vacant units to move in condition, outdoor grounds maintenance and property appearance. Candidates must possess basic hand tools; valid driver's license and have their own transportation. Respond to on call phone within reasonable period of time during regular business hours and while on call. Responds appropriately to requests from property manager and prioritizes jobs to complete in the quickest and most effective manner. Maintains building, performing routine painting, plumbing, electrical wiring, and other related maintenance activities as needed. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Must have good communication skills. Must have basic knowledge of construction and repair processes. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must have a valid driver's license, own transportation and tools. High school diploma/GED required Physically capable of lifting 50 pounds unassisted Experienced in operating a variety of equipment, including snow blowers, pressure washer and small hand tools Effective written and oral communication skills Able to work well with minimal supervision Ability to prioritize tasks and follow specified procedures EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); or at least six months related experience and/or training; or equivalent combination of education and experience. CERTIFICATIONS: Must have a valid driver's license & own vehicle. Clean background required. LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively after groups of customers or employees of organization. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems and find solutions within company protocol. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Heavy lifting is required. While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to climb or balance; stoop, kneel, crouch, or crawl; and taste or smell. Must be physically capable of lifting 50 pounds unassisted. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and outside weather conditions. Full Time Employment Benefits: Capano Residential offers competitive compensation and benefit package which includes medical, dental, vision, life insurance, and disability benefits. Medical, Dental & Vision 401k Match Life Insurance Paid Time Off (Vacation/Personal/Sick Time) Job Type: Full-time Salary: $22.00 - $28.00 /hour + benefits based on experience and certifications Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Tuition reimbursement Vision insurance Schedule: Monday to Friday On call Education: High school or equivalent (Preferred) Experience: Maintenance: 1 year (Required) License/Certification: Driver's License (Required) Work Location: In person

Job Description Job Title: Maintenance Technician/General Maintenance Department: Maintenance Reports To: Property Manager/Maintenance Supervisor Hours: Monday - Friday 8:00am - 5:00pm Compensation: $22 - $28 Hourly + Benefits (based on experience and certifications) SUMMARY Perform minor building, HVAC, plumbing, electrical and painting repairs as necessary Implement preventative maintenance measures Maintain inventory of repair equipment and supplies Complete inspections of buildings, units, office and amenity space as needed Respond quickly in the event of an emergency, notify appropriate personnel and follow safety protocol Perform other maintenance duties as requested CLEAN CRIMINAL BACKGROUND REQUIRED ESSENTIAL DUTIES AND RESPONSIBILITIES includes but is not limited to the following: Report directly to Maintenance Supervisor (if available - on staff) otherwise to Property Manager/Assistant Property Manager. This position is responsible for the maintenance and repair of mechanical equipment and building repair in a multifamily housing environment. - Ability to work with and repair drywall and paint drywall surfaces. - Perform basic maintenance tasks and general repairs including plumbing, roofing, appliance moving and repair. - Maintain common areas and grounds of the property. - Must be able to access and inspect property grounds by way of climbing ladders, stairwells, rooftops, confined areas, etc. - Perform troubleshooting, repairs and preventative maintenance, renovating and preparing vacant units to move in condition, outdoor grounds maintenance and property appearance. - Candidates must possess basic hand tools, valid drivers license and have their own transportation. - Maintains building, performing routine painting, plumbing, electrical wiring, and other related maintenance activities as needed. QUALIFICATIONS AND PREFERRED SKILLS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Must have good communication skills. Must have basic knowledge of construction and repair processes. Must have a valid driver's license, own transportation and tools. - High school diploma/GED required - Physical strength and dexterity to lift, move and handle equipment. - General maintenance knowledge and construction skills. - Ability to comprehend instructions furnished in written, oral, or diagram form. - Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedural manuals. - Exhibits behaviors of honesty, commitment to goal achievement and effective relationships with colleagues - Self-starter with the ability to quickly adapt to new circumstances as they arise - Ability to prioritize tasks and follow specified procedures EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); or at least six months related experience and/or training; or equivalent combination of education and experience. CERTIFICATIONS: Must have a valid drivers license & own vehicle. Clean background required. LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to speak effectively after groups of customers or employees of organization. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems and find solutions within company protocol. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Heavy lifting is required. While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to climb or balance; stoop, kneel, crouch, or crawl; and taste or smell. Must be physically capable of lifting a minimum of 50 pounds unassisted. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Full Time Employment Benefits: Capano Residential offers competitive compensation and benefit package which includes: medical, dental, vision, life insurance, and disability benefits. Medical, Dental & Vision 401k Match Life Insurance Paid Time Off (Vacation/Personal/Sick Time) 401(k) 401(k) matching Dental insurance Employee discount Health insurance Health savings account Life insurance Paid time off Vision insurance Schedule: Monday to Friday Ability to commute/relocate: Newark, DE 19702: Reliably commute or planning to relocate after starting work (Required) Application Question(s): Experience: Maintenance: 1 year (Preferred) Mechanical knowledge: 1 year (Preferred) License/Certification: Driver's License (Required) Work Location: In person

Job Description Job Title: Residential Maintenance Technician Department: Maintenance Reports To: Property Manager/Maintenance Supervisor Hours: Monday - Friday 8:00am - 5:00pm On Call: Some Nights/Weekends Required Compensation: $22 - $28 Hourly + Benefits (based on experience and certifications) SUMMARY Perform minor building, HVAC, plumbing, electrical and painting repairs as necessary Implement preventative maintenance measures Maintain inventory of repair equipment and supplies Complete inspections of buildings, units, office and amenity space as needed Respond quickly in the event of an emergency, notify appropriate personnel and follow safety protocol Perform other maintenance duties as requested CLEAN CRIMINAL BACKGROUND REQUIRED ESSENTIAL DUTIES AND RESPONSIBILITIES includes but is not limited to the following: Report directly to Maintenance Supervisor (if available - on staff) otherwise to Property Manager/Assistant Property Manager. This position is responsible for the maintenance and repair of mechanical equipment and building repair in a multifamily housing environment. Perform troubleshooting, repairs and preventative maintenance, renovating and preparing vacant units to move in condition, outdoor grounds maintenance and property appearance. Candidates must possess basic hand tools; valid driver's license and have their own transportation. Respond to on call phone within reasonable period of time during regular business hours and while on call. Responds appropriately to requests from property manager and prioritizes jobs to complete in the quickest and most effective manner. Maintains building, performing routine painting, plumbing, electrical wiring, and other related maintenance activities as needed. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Must have good communication skills. Must have basic knowledge of construction and repair processes. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must have a valid driver's license, own transportation and tools. High school diploma/GED required Physically capable of lifting 50 pounds unassisted Experienced in operating a variety of equipment, including snow blowers, pressure washer and small hand tools Effective written and oral communication skills Able to work well with minimal supervision Ability to prioritize tasks and follow specified procedures EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); or at least six months related experience and/or training; or equivalent combination of education and experience. CERTIFICATIONS: Must have a valid driver's license & own vehicle. Clean background required. LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively after groups of customers or employees of organization. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems and find solutions within company protocol. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Heavy lifting is required. While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to climb or balance; stoop, kneel, crouch, or crawl; and taste or smell. Must be physically capable of lifting 50 pounds unassisted. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and outside weather conditions. Full Time Employment Benefits: Capano Residential offers competitive compensation and benefit package which includes medical, dental, vision, life insurance, and disability benefits. Medical, Dental & Vision 401k Match Life Insurance Paid Time Off (Vacation/Personal/Sick Time) Job Type: Full-time Salary: $22.00 - $28.00 /hour + benefits based on experience and certifications Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Tuition reimbursement Vision insurance Schedule: Monday to Friday On call Education: High school or equivalent (Preferred) Experience: Maintenance: 1 year (Required) License/Certification: Driver's License (Required) Work Location: In person

Job Description Job Title: Maintenance Technician/General Maintenance Department: Maintenance Reports To: Property Manager/Maintenance Supervisor Hours: Monday - Friday 8:00am - 5:00pm Compensation: $22 - $28 Hourly + Benefits (based on experience and certifications) SUMMARY Perform minor building, HVAC, plumbing, electrical and painting repairs as necessary Implement preventative maintenance measures Maintain inventory of repair equipment and supplies Complete inspections of buildings, units, office and amenity space as needed Respond quickly in the event of an emergency, notify appropriate personnel and follow safety protocol Perform other maintenance duties as requested CLEAN CRIMINAL BACKGROUND REQUIRED ESSENTIAL DUTIES AND RESPONSIBILITIES includes but is not limited to the following: Report directly to Maintenance Supervisor (if available - on staff) otherwise to Property Manager/Assistant Property Manager. This position is responsible for the maintenance and repair of mechanical equipment and building repair in a multifamily housing environment. - Ability to work with and repair drywall and paint drywall surfaces. - Perform basic maintenance tasks and general repairs including plumbing, roofing, appliance moving and repair. - Maintain common areas and grounds of the property. - Must be able to access and inspect property grounds by way of climbing ladders, stairwells, rooftops, confined areas, etc. - Perform troubleshooting, repairs and preventative maintenance, renovating and preparing vacant units to move in condition, outdoor grounds maintenance and property appearance. - Candidates must possess basic hand tools, valid drivers license and have their own transportation. - Maintains building, performing routine painting, plumbing, electrical wiring, and other related maintenance activities as needed. QUALIFICATIONS AND PREFERRED SKILLS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Must have good communication skills. Must have basic knowledge of construction and repair processes. Must have a valid driver's license, own transportation and tools. - High school diploma/GED required - Physical strength and dexterity to lift, move and handle equipment. - General maintenance knowledge and construction skills. - Ability to comprehend instructions furnished in written, oral, or diagram form. - Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedural manuals. - Exhibits behaviors of honesty, commitment to goal achievement and effective relationships with colleagues - Self-starter with the ability to quickly adapt to new circumstances as they arise - Ability to prioritize tasks and follow specified procedures EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); or at least six months related experience and/or training; or equivalent combination of education and experience. CERTIFICATIONS: Must have a valid drivers license & own vehicle. Clean background required. LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to speak effectively after groups of customers or employees of organization. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems and find solutions within company protocol. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Heavy lifting is required. While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to climb or balance; stoop, kneel, crouch, or crawl; and taste or smell. Must be physically capable of lifting a minimum of 50 pounds unassisted. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Full Time Employment Benefits: Capano Residential offers competitive compensation and benefit package which includes: medical, dental, vision, life insurance, and disability benefits. Medical, Dental & Vision 401k Match Life Insurance Paid Time Off (Vacation/Personal/Sick Time) 401(k) 401(k) matching Dental insurance Employee discount Health insurance Health savings account Life insurance Paid time off Vision insurance Ability to commute/relocate: Wilmington, DE : Reliably commute or planning to relocate after starting work (Required) Experience: Maintenance: 1 year (Preferred) Mechanical knowledge: 1 year (Preferred) License/Certification: Driver's License (Required) Work Location: In person

The Blooming Glen Contractors, Inc. Water & Wastewater Services Division (BGC WWS), a partner of the H&K Group, Inc. is seeking a self-motivated full-time Assistant Service Technician to join our team. The successful candidate will work under the direction of the lead tech to help service, repair, and install water/wastewater equipment and systems. The ideal candidate is safety focused, team oriented, and takes initiative. This position will service the Delaware, Maryland and Virginia area. Why work for H&K Group, Inc.? Competitive salary commensurate with experience 100% Company-paid Health Benefits 401(k) Savings and Investment Plan Tuition reimbursement programs available to qualifying employees for approved programs Additional training programs including on the job, online through H&K Academy, manufacturer offered training, and more Company-provided Service Vehicle for work travel and daily field assignments Responsibilities Essential Duties and Responsibilities Support lead technicians in all aspects of water/wastewater mechanical equipment repairs and maintenance at both pump stations and water/wastewater treatment facilities. Troubleshoot mechanical and basic electrical issues on pumps, motors, blowers, and related process equipment. Must have basic knowledge in phases of general construction. Perform laser shaft alignment and vibration testing. Hands-on training provided. Minor welding or fabrication as needed. Help stage tools, rigging, and materials; set up and break down job sites. Ensure compliance with OSHA and confined-space safety protocols; complete service reports and daily logs. Participate in an on-call rotation for emergency response. Qualifications Required Skills, Education, and Experience 2+ years as a technician in general construction or industrial maintenance, with a mechanical focus (pumps, piping, rotating equipment) Must be comfortable working in and around wastewater environments Basic mechanical knowledge Able to lift and/or move up to 75 pounds Strong analytical and problem-solving skills Effective verbal and written communication skills Efficiency, accuracy, and responsibility Preferred Skills, Education, and Experience 3 years related experience Maintenance experience Experience in Wastewater services, heavy civil construction, or other heavy industry Certifications OSHA 40-hour Confined Space Entry CPR & First-Aid Technical Skill Set Proficient with basic hand and power tools; mechanically inclined Able to read equipment manuals, schematics and blueprints Clear communicator, comfortable working side-by-side with plant personnel Self-motivated and organized Advanced skills such as laser assignments and vibration analysis Exposure to welding or pipefitting is a plus Mobility & Driving Valid driver's license Physical Demands Occasionally required to: Stand, walk, sit, climb, balance, stoop, kneel, crouch, or crawl Talk and hear Lift and/or move up to 75 pounds Work Environment Occasionally exposed to: Moving parts Fumes and/or airborne particles Extreme heat Risk of shock Inclement/outdoor weather Noise level is loud at times The Blooming Glen Contractors, Inc. Water & Wastewater Services Division (BGC WWS) utilizes both a nationally recognized staff of mechanical professionals and the latest in equipment and technology to construct or remediate virtually any water or wastewater repair situation. Serving the needs of the municipal, industrial, commercial, and institutional sectors since 2009, BGC WWS provides superior quality, efficiency, and timely performance to all our clientele. We also offer custom fabrication services for any atypical projects, with the capacity to provide complete design-build services. H&K Group, Inc. provides complete heavy civil contracting and construction materials solutions with safety, speed, quality, efficiency, and value. Beginning as a small family business a half century ago, we are now a dynamic group of vertically integrated companies that has been growing and prospering for 50 years. Thank you for your interest in employment with H&K Group, Inc. At H&K, we invest in our people, providing the essential training, instruction, and supervisory support that they need to develop and grow within our company. We acknowledge that H&K's strength and success is directly related to our employees and the talents, dedication, and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference. H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Pre-employment Physical 100% Company-Paid Health Benefits! We can recommend jobs specifically for you! Click here to get started.

Overview MasTec Professional Services provides end-to-end engineering, design, and integrated services to the power, oil & gas pipeline, and gas distribution industries across the country. With a genesis in construction and a skilled team of multidiscipline engineers and project management professionals, the company delivers best-in-class infrastructure solutions, including design, asset integrity management, feasibility studies, surveys, constructability reviews, turnkey delivery services, and more. MasTec Professional Services creates collaborative partnerships with clients by building trust and consistently delivering the highest standards of performance. MasTec Professional Services is a purpose-driven company. Our core values guide our strategy, performance, and culture. We believe in maintaining an environment where team members can make an impact, grow, and thrive. A place where they find meaning and purpose in doing the important work of ensuring communities have the vital energy, light, and communications to prosper. Our culture is inclusive and welcoming. Our teams are empowered with abundant training, tools, and opportunities to follow their curiosity and ambitions. Everyone has an equal chance to advance. Everyone is supported, respected, and challenged to be their best. We're always looking for talented and dedicated people to join us and love where they work. MasTec Professional Services is a proud subsidiary of MasTec (NYSE: MTZ), a Fortune 500 Company ranked by Energy News-Record as one of the leading contractors in the country. MPS is part of the MasTec Power Delivery segment. We are certified as a minority-controlled company by the National Minority Suppliers Development Council (NMSDC). Our rich diversity of people and ideas makes us a stronger, more innovative organization. Job Summary-CP-2 Certified Perform advanced field testing of corrosion control systems on underground and submerged metallic structures. Recommend and perform troubleshooting tests and identify when such testing is required. Work with engineering to determine design solutions. Responsibilities Core Responsibilities Work independently, make field decisions without direct supervision and be responsible for obtaining field data to determine condition of structures under evaluation. Compile and submit field data for senior staff review. Be familiar with standard survey and construction practices for corrosion control projects. Estimate duration for both engineering and construction projects. Organize and perform multiple small to medium sized projects simultaneously. Develop test procedures for complex troubleshooting. Evaluate field data and prepare draft reports for the area supervisor. Perform field design testing for cathodic protection solutions. Work with engineering to design cathodic protection systems. Qualifications Minimum Qualifications Have a current certification with AMPP (formerly NACE International) as a Cathodic Protection Technician CP-2 Certification 3-5 years (minimum) experience in corrosion control industry particularly related to cathodic protection work. Government contracts require U.S. Citizenship Demonstrated verbal and written communication skills. Ability to work independently as well as interact with team members, clients and management staff. Ability/willingness to travel as required for the job. Clean driving record and ability to operate a company vehicle This position may require significant time standing or walking on uneven ground, possible climbing of ladders or being in high places, working in tight spaces, lifting up to 60 pounds, and, in general, being overall physically demanding. It may also require work in an all-weather environment. Physical Demands and Work Environment This position may require significant time standing or walking on uneven ground, possible climbing of ladders or being in high places, working in tight spaces, lifting up to 50 pounds, and, in general, being overall physically demanding. It may also require work in an all-weather environment. Please note this is not designed to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee for this job. The Company reserves the right to revise or change the job duties as the need arises. Management reserves the right to change the description, duties, or work schedules to accommodate individuals with disabilities. Equal Employment Opportunity: The Company's policy is not to unlawfully discriminate against any applicant or employee based on race, color, national origin, ethnicity, sex, gender, sexual orientation, religion, marital status, age, disability, genetic information, military or veteran status, or any other basis protected by applicable law and EEOC regulations. The Company also prohibits harassment of applicants or employees based on any of these protected categories. Minimum Qualifications Have a current certification with AMPP (formerly NACE International) as a Cathodic Protection Technician CP-2 Certification 3-5 years (minimum) experience in corrosion control industry particularly related to cathodic protection work. Government contracts require U.S. Citizenship Demonstrated verbal and written communication skills. Ability to work independently as well as interact with team members, clients and management staff. Ability/willingness to travel as required for the job. Clean driving record and ability to operate a company vehicle This position may require significant time standing or walking on uneven ground, possible climbing of ladders or being in high places, working in tight spaces, lifting up to 60 pounds, and, in general, being overall physically demanding. It may also require work in an all-weather environment. Physical Demands and Work Environment This position may require significant time standing or walking on uneven ground, possible climbing of ladders or being in high places, working in tight spaces, lifting up to 50 pounds, and, in general, being overall physically demanding. It may also require work in an all-weather environment. Please note this job description is not designed to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee for this job. The Company reserves the right to revise or change the job duties as the need arises. Management reserves the right to change the description, duties, or work schedules to accommodate individuals with disabilities. Equal Employment Opportunity: The Company's policy is not to unlawfully discriminate against any applicant or employee based on race, color, national origin, ethnicity, sex, gender, sexual orientation, religion, marital status, age, disability, genetic information, military or veteran status, or any other basis protected by applicable law and EEOC regulations. The Company also prohibits harassment of applicants or employees based on any of these protected categories. Core Responsibilities Work independently, make field decisions without direct supervision and be responsible for obtaining field data to determine condition of structures under evaluation. Compile and submit field data for senior staff review. Be familiar with standard survey and construction practices for corrosion control projects. Estimate duration for both engineering and construction projects. Organize and perform multiple small to medium sized projects simultaneously. Develop test procedures for complex troubleshooting. Evaluate field data and prepare draft reports for the area supervisor. Perform field design testing for cathodic protection solutions. Work with engineering to design cathodic protection systems.

Overview MasTec Professional Services provides end-to-end engineering, design, and integrated services to the power, oil & gas pipeline, and gas distribution industries across the country. With a genesis in construction and a skilled team of multidiscipline engineers and project management professionals, the company delivers best-in-class infrastructure solutions, including design, asset integrity management, feasibility studies, surveys, constructability reviews, turnkey delivery services, and more. MasTec Professional Services creates collaborative partnerships with clients by building trust and consistently delivering the highest standards of performance. MasTec Professional Services is a purpose-driven company. Our core values guide our strategy, performance, and culture. We believe in maintaining an environment where team members can make an impact, grow, and thrive. A place where they find meaning and purpose in doing the important work of ensuring communities have the vital energy, light, and communications to prosper. Our culture is inclusive and welcoming. Our teams are empowered with abundant training, tools, and opportunities to follow their curiosity and ambitions. Everyone has an equal chance to advance. Everyone is supported, respected, and challenged to be their best. We're always looking for talented and dedicated people to join us and love where they work. MasTec Professional Services is a proud subsidiary of MasTec (NYSE: MTZ), a Fortune 500 Company ranked by Energy News-Record as one of the leading contractors in the country. MPS is part of the MasTec Power Delivery segment. We are certified as a minority-controlled company by the National Minority Suppliers Development Council (NMSDC). Our rich diversity of people and ideas makes us a stronger, more innovative organization. Job Summary-CP-1 Certified Perform basic field testing of corrosion control systems on underground and submerged metallic structures. Recommend troubleshooting tests and identify when such testing is required. Responsibilities Core Responsibilities Work independently, make field decisions without direct supervision and be responsible for obtaining field data to determine condition of structures under evaluation. Compile and submit field data for senior staff review. Be familiar with standard survey and construction practices for corrosion control projects. Estimate duration for both engineering and construction projects. Organize and perform multiple small projects simultaneously. Develop test procedures for complex troubleshooting. Evaluate field data and prepare draft reports for the area supervisor. Qualifications Minimum Qualifications Have a current certification with AMPP (formerly NACE International) as a Cathodic Protection Tester CP-1 Certification 1-3 years (minimum) experience in corrosion control industry particularly related to cathodic protection work. Government contracts require U.S. Citizenship Demonstrated verbal and written communication skills. Ability to work independently as well as interact with team members, clients and management staff. Ability/willingness to travel as required for the job. Clean driving record and ability to operate a company vehicle This position may require significant time standing or walking on uneven ground, possible climbing of ladders or being in high places, working in tight spaces, lifting up to 60 pounds, and, in general, being overall physically demanding. It may also require work in an all-weather environment. Physical Demands and Work Environment This position may require significant time standing or walking on uneven ground, possible climbing of ladders or being in high places, working in tight spaces, lifting up to 50 pounds, and, in general, being overall physically demanding. It may also require work in an all-weather environment. Please note this is not designed to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee for this job. The Company reserves the right to revise or change the job duties as the need arises. Management reserves the right to change the description, duties, or work schedules to accommodate individuals with disabilities. Equal Employment Opportunity: The Company's policy is not to unlawfully discriminate against any applicant or employee based on race, color, national origin, ethnicity, sex, gender, sexual orientation, religion, marital status, age, disability, genetic information, military or veteran status, or any other basis protected by applicable law and EEOC regulations. The Company also prohibits harassment of applicants or employees based on any of these protected categories. Minimum Qualifications Have a current certification with AMPP (formerly NACE International) as a Cathodic Protection Tester CP-1 Certification 1-3 years (minimum) experience in corrosion control industry particularly related to cathodic protection work. Government contracts require U.S. Citizenship Demonstrated verbal and written communication skills. Ability to work independently as well as interact with team members, clients and management staff. Ability/willingness to travel as required for the job. Clean driving record and ability to operate a company vehicle This position may require significant time standing or walking on uneven ground, possible climbing of ladders or being in high places, working in tight spaces, lifting up to 60 pounds, and, in general, being overall physically demanding. It may also require work in an all-weather environment. Physical Demands and Work Environment This position may require significant time standing or walking on uneven ground, possible climbing of ladders or being in high places, working in tight spaces, lifting up to 50 pounds, and, in general, being overall physically demanding. It may also require work in an all-weather environment. Please note this job description is not designed to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee for this job. The Company reserves the right to revise or change the job duties as the need arises. Management reserves the right to change the description, duties, or work schedules to accommodate individuals with disabilities. Equal Employment Opportunity: The Company's policy is not to unlawfully discriminate against any applicant or employee based on race, color, national origin, ethnicity, sex, gender, sexual orientation, religion, marital status, age, disability, genetic information, military or veteran status, or any other basis protected by applicable law and EEOC regulations. The Company also prohibits harassment of applicants or employees based on any of these protected categories. Core Responsibilities Work independently, make field decisions without direct supervision and be responsible for obtaining field data to determine condition of structures under evaluation. Compile and submit field data for senior staff review. Be familiar with standard survey and construction practices for corrosion control projects. Estimate duration for both engineering and construction projects. Organize and perform multiple small projects simultaneously. Develop test procedures for complex troubleshooting. Evaluate field data and prepare draft reports for the area supervisor.

Overview MasTec Professional Services provides end-to-end engineering, design, and integrated services to the power, oil & gas pipeline, and gas distribution industries across the country. With a genesis in construction and a skilled team of multidiscipline engineers and project management professionals, the company delivers best-in-class infrastructure solutions, including design, asset integrity management, feasibility studies, surveys, constructability reviews, turnkey delivery services, and more. MasTec Professional Services creates collaborative partnerships with clients by building trust and consistently delivering the highest standards of performance. MasTec Professional Services is a purpose-driven company. Our core values guide our strategy, performance, and culture. We believe in maintaining an environment where team members can make an impact, grow, and thrive. A place where they find meaning and purpose in doing the important work of ensuring communities have the vital energy, light, and communications to prosper. Our culture is inclusive and welcoming. Our teams are empowered with abundant training, tools, and opportunities to follow their curiosity and ambitions. Everyone has an equal chance to advance. Everyone is supported, respected, and challenged to be their best. We're always looking for talented and dedicated people to join us and love where they work. MasTec Professional Services is a proud subsidiary of MasTec (NYSE: MTZ), a Fortune 500 Company ranked by Energy News-Record as one of the leading contractors in the country. MPS is part of the MasTec Power Delivery segment. We are certified as a minority-controlled company by the National Minority Suppliers Development Council (NMSDC). Our rich diversity of people and ideas makes us a stronger, more innovative organization. Job Summary-CP-2 Certified Perform advanced field testing of corrosion control systems on underground and submerged metallic structures. Recommend and perform troubleshooting tests and identify when such testing is required. Work with engineering to determine design solutions. Responsibilities Core Responsibilities Work independently, make field decisions without direct supervision and be responsible for obtaining field data to determine condition of structures under evaluation. Compile and submit field data for senior staff review. Be familiar with standard survey and construction practices for corrosion control projects. Estimate duration for both engineering and construction projects. Organize and perform multiple small to medium sized projects simultaneously. Develop test procedures for complex troubleshooting. Evaluate field data and prepare draft reports for the area supervisor. Perform field design testing for cathodic protection solutions. Work with engineering to design cathodic protection systems. Qualifications Minimum Qualifications Have a current certification with AMPP (formerly NACE International) as a Cathodic Protection Technician CP-2 Certification 3-5 years (minimum) experience in corrosion control industry particularly related to cathodic protection work. Government contracts require U.S. Citizenship Demonstrated verbal and written communication skills. Ability to work independently as well as interact with team members, clients and management staff. Ability/willingness to travel as required for the job. Clean driving record and ability to operate a company vehicle This position may require significant time standing or walking on uneven ground, possible climbing of ladders or being in high places, working in tight spaces, lifting up to 60 pounds, and, in general, being overall physically demanding. It may also require work in an all-weather environment. Physical Demands and Work Environment This position may require significant time standing or walking on uneven ground, possible climbing of ladders or being in high places, working in tight spaces, lifting up to 50 pounds, and, in general, being overall physically demanding. It may also require work in an all-weather environment. Please note this is not designed to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee for this job. The Company reserves the right to revise or change the job duties as the need arises. Management reserves the right to change the description, duties, or work schedules to accommodate individuals with disabilities. Equal Employment Opportunity: The Company's policy is not to unlawfully discriminate against any applicant or employee based on race, color, national origin, ethnicity, sex, gender, sexual orientation, religion, marital status, age, disability, genetic information, military or veteran status, or any other basis protected by applicable law and EEOC regulations. The Company also prohibits harassment of applicants or employees based on any of these protected categories. Minimum Qualifications Have a current certification with AMPP (formerly NACE International) as a Cathodic Protection Technician CP-2 Certification 3-5 years (minimum) experience in corrosion control industry particularly related to cathodic protection work. Government contracts require U.S. Citizenship Demonstrated verbal and written communication skills. Ability to work independently as well as interact with team members, clients and management staff. Ability/willingness to travel as required for the job. Clean driving record and ability to operate a company vehicle This position may require significant time standing or walking on uneven ground, possible climbing of ladders or being in high places, working in tight spaces, lifting up to 60 pounds, and, in general, being overall physically demanding. It may also require work in an all-weather environment. Physical Demands and Work Environment This position may require significant time standing or walking on uneven ground, possible climbing of ladders or being in high places, working in tight spaces, lifting up to 50 pounds, and, in general, being overall physically demanding. It may also require work in an all-weather environment. Please note this job description is not designed to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee for this job. The Company reserves the right to revise or change the job duties as the need arises. Management reserves the right to change the description, duties, or work schedules to accommodate individuals with disabilities. Equal Employment Opportunity: The Company's policy is not to unlawfully discriminate against any applicant or employee based on race, color, national origin, ethnicity, sex, gender, sexual orientation, religion, marital status, age, disability, genetic information, military or veteran status, or any other basis protected by applicable law and EEOC regulations. The Company also prohibits harassment of applicants or employees based on any of these protected categories. Core Responsibilities Work independently, make field decisions without direct supervision and be responsible for obtaining field data to determine condition of structures under evaluation. Compile and submit field data for senior staff review. Be familiar with standard survey and construction practices for corrosion control projects. Estimate duration for both engineering and construction projects. Organize and perform multiple small to medium sized projects simultaneously. Develop test procedures for complex troubleshooting. Evaluate field data and prepare draft reports for the area supervisor. Perform field design testing for cathodic protection solutions. Work with engineering to design cathodic protection systems.

Overview MasTec Professional Services provides end-to-end engineering, design, and integrated services to the power, oil & gas pipeline, and gas distribution industries across the country. With a genesis in construction and a skilled team of multidiscipline engineers and project management professionals, the company delivers best-in-class infrastructure solutions, including design, asset integrity management, feasibility studies, surveys, constructability reviews, turnkey delivery services, and more. MasTec Professional Services creates collaborative partnerships with clients by building trust and consistently delivering the highest standards of performance. MasTec Professional Services is a purpose-driven company. Our core values guide our strategy, performance, and culture. We believe in maintaining an environment where team members can make an impact, grow, and thrive. A place where they find meaning and purpose in doing the important work of ensuring communities have the vital energy, light, and communications to prosper. Our culture is inclusive and welcoming. Our teams are empowered with abundant training, tools, and opportunities to follow their curiosity and ambitions. Everyone has an equal chance to advance. Everyone is supported, respected, and challenged to be their best. We're always looking for talented and dedicated people to join us and love where they work. MasTec Professional Services is a proud subsidiary of MasTec (NYSE: MTZ), a Fortune 500 Company ranked by Energy News-Record as one of the leading contractors in the country. MPS is part of the MasTec Power Delivery segment. We are certified as a minority-controlled company by the National Minority Suppliers Development Council (NMSDC). Our rich diversity of people and ideas makes us a stronger, more innovative organization. Job Summary-CP-1 Certified Perform basic field testing of corrosion control systems on underground and submerged metallic structures. Recommend troubleshooting tests and identify when such testing is required. Responsibilities Core Responsibilities Work independently, make field decisions without direct supervision and be responsible for obtaining field data to determine condition of structures under evaluation. Compile and submit field data for senior staff review. Be familiar with standard survey and construction practices for corrosion control projects. Estimate duration for both engineering and construction projects. Organize and perform multiple small projects simultaneously. Develop test procedures for complex troubleshooting. Evaluate field data and prepare draft reports for the area supervisor. Qualifications Minimum Qualifications Have a current certification with AMPP (formerly NACE International) as a Cathodic Protection Tester CP-1 Certification 1-3 years (minimum) experience in corrosion control industry particularly related to cathodic protection work. Government contracts require U.S. Citizenship Demonstrated verbal and written communication skills. Ability to work independently as well as interact with team members, clients and management staff. Ability/willingness to travel as required for the job. Clean driving record and ability to operate a company vehicle This position may require significant time standing or walking on uneven ground, possible climbing of ladders or being in high places, working in tight spaces, lifting up to 60 pounds, and, in general, being overall physically demanding. It may also require work in an all-weather environment. Physical Demands and Work Environment This position may require significant time standing or walking on uneven ground, possible climbing of ladders or being in high places, working in tight spaces, lifting up to 50 pounds, and, in general, being overall physically demanding. It may also require work in an all-weather environment. Please note this is not designed to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee for this job. The Company reserves the right to revise or change the job duties as the need arises. Management reserves the right to change the description, duties, or work schedules to accommodate individuals with disabilities. Equal Employment Opportunity: The Company's policy is not to unlawfully discriminate against any applicant or employee based on race, color, national origin, ethnicity, sex, gender, sexual orientation, religion, marital status, age, disability, genetic information, military or veteran status, or any other basis protected by applicable law and EEOC regulations. The Company also prohibits harassment of applicants or employees based on any of these protected categories. Minimum Qualifications Have a current certification with AMPP (formerly NACE International) as a Cathodic Protection Tester CP-1 Certification 1-3 years (minimum) experience in corrosion control industry particularly related to cathodic protection work. Government contracts require U.S. Citizenship Demonstrated verbal and written communication skills. Ability to work independently as well as interact with team members, clients and management staff. Ability/willingness to travel as required for the job. Clean driving record and ability to operate a company vehicle This position may require significant time standing or walking on uneven ground, possible climbing of ladders or being in high places, working in tight spaces, lifting up to 60 pounds, and, in general, being overall physically demanding. It may also require work in an all-weather environment. Physical Demands and Work Environment This position may require significant time standing or walking on uneven ground, possible climbing of ladders or being in high places, working in tight spaces, lifting up to 50 pounds, and, in general, being overall physically demanding. It may also require work in an all-weather environment. Please note this job description is not designed to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee for this job. The Company reserves the right to revise or change the job duties as the need arises. Management reserves the right to change the description, duties, or work schedules to accommodate individuals with disabilities. Equal Employment Opportunity: The Company's policy is not to unlawfully discriminate against any applicant or employee based on race, color, national origin, ethnicity, sex, gender, sexual orientation, religion, marital status, age, disability, genetic information, military or veteran status, or any other basis protected by applicable law and EEOC regulations. The Company also prohibits harassment of applicants or employees based on any of these protected categories. Core Responsibilities Work independently, make field decisions without direct supervision and be responsible for obtaining field data to determine condition of structures under evaluation. Compile and submit field data for senior staff review. Be familiar with standard survey and construction practices for corrosion control projects. Estimate duration for both engineering and construction projects. Organize and perform multiple small projects simultaneously. Develop test procedures for complex troubleshooting. Evaluate field data and prepare draft reports for the area supervisor.

Future Technician (Mechanic) Opportunity with EquipmentShare! EquipmentShare is accepting applications for future Technician (Mechanic) openings in the Delmar, DE area. At EquipmentShare, we're always looking ahead - and that means continuously building a pipeline of talented, driven individuals who align with our mission to improve the construction industry through innovation and service. While this posting does not represent a current open position, it allows you to express interest and share your experience with us. By applying here, you'll become part of our talent network and be among the first considered when future opportunities arise. We're a company in constant growth and evolution. Let's build something great together! For this role, we look for individuals to be responsible for providing maintenance and repair for a variety of customer and company-owned heavy equipment machinery and aerial lifts. Mechanics will have the opportunity to work on the newest fleet in the industry. Primary Responsibilities * Practice safe job practices for repairing equipment * Use technology (laptops and tablets) comfortably * Maintenance and repair of complex mechanical, electrical, hydraulic, and diesel systems on a variety of rental and customer equipment and tools while using a high degree of independent judgment * Assist in the training of lower level technicians as needed * Maintain paperwork/electronic documentation of work performed (work orders) in a complete and timely manner on a daily basis * Assist with pick-up and delivery of equipment & parts * Be knowledgeable of OSHA requirements (preferred) * Field Mechanics: When required, travel to customer job sites for repair/maintenance of rental or customer owned equipment; must maintain service vehicle in a clean and professional manner * Year-round company provided OEM training * Other duties, assigned as needed Skills & Qualifications * Must own tools applicable to position * Advanced mechanical aptitude and working knowledge of tools * Extensive knowledge of construction equipment with an advanced understanding of schematics and diagrams * Superior customer service, teamwork and verbal/written communication skills * High School diploma, Trade school certificate preferred * Experience in field service, maintenance and repair preferred * Field mechanics: Valid driver's license with acceptable driving record. Must be at least 21 years old to operate company vehicle. * Must be able to move, stand, stoop and bend freely * Must be able to lift up to 50 pounds at times * Field Technicians: may be required to be clean shaven in order to enter worksites for EquipmentShare customers who have this requirement * This is a safety sensitive position and any offer of employment will be contingent on passing a 10 panel drug screen Why We're a Better Place to Work * Competitive salary * Medical, Dental, and Vision benefits coverage for full-time employees * Generous paid time off (PTO) plus company-paid holidays * 401(k) and company match * Annual tool and boot reimbursements for those in applicable jobs * Fitness Membership stipends plus seasonal and year-round wellness challenges in applicable jobs * Company-sponsored events (annual family gatherings, food truck nights, and more) * Volunteering and local charity initiatives that help you nurture and grow the communities you call home. Employees receive paid volunteer time every year * Opportunities for career advancement and professional development About You Our mission to change an entire industry is not easily achieved, so we only hire people who are inspired by the goal and up for the challenge. In turn, our employees have every opportunity to grow with us, achieve personal and professional success and enjoy making a tangible difference in an industry that's long been resistant to change. EquipmentShare is an EOE M/F/D/V