Machine Operator jobs at Hollandia Dairy

Join Blommer! We offer HEALTH & DENTAL BENEFITS DAY 1 OF HIRE! Blommer understands that our employees are our biggest assets. With this in mind we offer a generous benefits package, tuition reimbursement and 10 pounds of free chocolate for your birthday! Blommer has been providing delicious, high quality chocolate and cocoa products to customers since 1939. Built as a family business, we are continuing to grow and are looking for motivated and reliable associates to help in our mission of Bringing Chocolate to Life! Reports to: Production Shift Supervisor Shifts: Sunday-Tuesday + Alternating Wednesdays, or Thursday-Sunday + Alternating Wednesdays Starting: $24.00 per hour Requirements • Ability to set up and adjust operate machinery ensuring product meets quality standards • Safely, efficiently operate assigned production equipment • Perform quality checks and record in system • Monitor equipment performance, address issues with support from quality and maintenance as needed • Comply with food safety procedures to ensure product safety • Maintain a clean and safe working environment • Ability to work as a team • Communicate issues • Performs other duties and/or responsibilities as assigned Qualifications • High school diploma or equivalent is required • Three to five years manufacturing experience preferred • Ability to read and comprehend basic instructions • Must read, write, and speak English at an adequate level for this position • Ability to enter and utilize information in our computer systems Blommer Chocolate Company provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Join Blommer! We offer HEALTH & DENTAL BENEFITS DAY 1 OF HIRE! Blommer understands that our employees are our biggest assets. With this in mind we offer a generous benefits package, tuition reimbursement and 10 pounds of free chocolate for your birthday! Blommer has been providing delicious, high quality chocolate and cocoa products to customers since 1939. Built as a family business, we are continuing to grow and are looking for motivated and reliable associates to help in our mission of Bringing Chocolate to Life! Reports to: Production Shift Supervisor Shifts: Sunday-Tuesday + Alternating Wednesdays, or Thursday-Sunday + Alternating Wednesdays Starting: $24.00 per hour + Shift Differential Requirements • Ability to set up and adjust operate machinery ensuring product meets quality standards • Safely, efficiently operate assigned production equipment • Perform quality checks and record in system • Monitor equipment performance, address issues with support from quality and maintenance as needed • Comply with food safety procedures to ensure product safety • Maintain a clean and safe working environment • Ability to work as a team • Communicate issues • Performs other duties and/or responsibilities as assigned Qualifications • High school diploma or equivalent is required • Three to five years manufacturing experience preferred • Ability to read and comprehend basic instructions • Must read, write, and speak English at an adequate level for this position • Ability to enter and utilize information in our computer systems Blommer Chocolate Company provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Full-time Description Job Title: Machine Operator Company: Biomerics Position Type: Full-Time Salary: Starting $23/hour DOE Company Overview: Biomerics is a world-class manufacturer and innovative polymer solutions provider for the medical device and biotech industries. As a vertically integrated company, we specialize in the design, development, and production of medical devices for diagnostic and interventional procedures. We are focused on next-generation solutions for the vascular access, electrophysiology, cardiac rhythm management, neurovascular, structural heart, and cardiovascular markets. At Biomerics, we are dedicated to our diverse employee base. We understand that a strong, skilled, and engaged workforce is the foundation of our continued success as a business. We strive to live up to the Biomerics values in all our interactions. It is an exciting time to be part of our collective team. There is no limit to the impact that can be achieved here at Biomerics. We improve and advance our employees' lives, and the lives of the patients that depend on our products. At Biomerics we believe in integrity, partnership, empowerment & accountability, trust, agility, teamwork, excellence, and we care. Our team-oriented, customer-focused corporate culture places a premium on building strategic, mutually beneficial partnerships with customers as well as our team members. Job Description: We are always looking for talented Machine Operators to assist in our objective to produce high-quality parts to customer specifications every time and on time. The successful applicant with be an excellent team player, possess exceptional analytical and technical skills, and the drive to continually learn and grow with the company Responsibilities: Follows documented procedures for generating assigned production work daily. Loads fixtures and makes adjustments to processes as needed Utilizes a microscope to inspect parts and identify quality issues Refers to blueprints to ensure jobs are processed in accordance with specifications Monitors equipment to ensure that it is in proper working order. Recommends maintenance and repair Sets up jobs as appropriate Maintains a safe and healthy work environment by following standards and procedures; complying with legal regulations. Requirements 1-3 years of experience as a Machine Operator in a machining or high-tech manufacturing environment preferred. Educational background in light industrial trades and/or in a post-secondary vocational program is a plus. Mechanical aptitude necessary for loading fixtures and making adjustments to processes Demonstrated ability using windows based computers Ability to follow a number of trust-based policies Strong work ethic, is reliable to report to work every day, and works a full shift and overtime as needed. Flexible and willing to work on a variety of jobs depending on business need Analytical ability Detail orientation Background in promoting process improvement Strong oral and written communication skills Ability to interface with customers to troubleshoot issues and offer exceptional service Background in safety promotion and management Benefits: Medical/Dental/Vision Insurance, Short-Term Disability, Long-Term Disability, Life Insurance, Paid Vacation Days, Paid Holidays, 401k Please, No Recruitment Agency calls or emails (we are not using recruitment services for this, or any other role posted). Biomerics does not accept non-solicited resumes or candidate submittals from search/recruiting agencies not already on Biomerics approved agency list. Unsolicited resumes or candidate information submitted to Biomerics by search/recruiting agencies not already on Biomerics approved agency list shall become the property of Biomerics and if Biomerics subsequently hire the candidate, Biomerics shall not owe any fee to the submitting agency. Salary Description Starting $23/hour DOE

Job Title: Machine Operator Company: Biomerics Position Type: Full-Time Salary: Starting $23/hour DOE Company Overview: Biomerics is a world-class manufacturer and innovative polymer solutions provider for the medical device and biotech industries. As a vertically integrated company, we specialize in the design, development, and production of medical devices for diagnostic and interventional procedures. We are focused on next-generation solutions for the vascular access, electrophysiology, cardiac rhythm management, neurovascular, structural heart, and cardiovascular markets. At Biomerics, we are dedicated to our diverse employee base. We understand that a strong, skilled, and engaged workforce is the foundation of our continued success as a business. We strive to live up to the Biomerics values in all our interactions. It is an exciting time to be part of our collective team. There is no limit to the impact that can be achieved here at Biomerics. We improve and advance our employees' lives, and the lives of the patients that depend on our products. At Biomerics we believe in integrity, partnership, empowerment & accountability, trust, agility, teamwork, excellence, and we care. Our team-oriented, customer-focused corporate culture places a premium on building strategic, mutually beneficial partnerships with customers as well as our team members. Job Description: We are always looking for talented Machine Operators to assist in our objective to produce high-quality parts to customer specifications every time and on time. The successful applicant with be an excellent team player, possess exceptional analytical and technical skills, and the drive to continually learn and grow with the company Responsibilities: Follows documented procedures for generating assigned production work daily. Loads fixtures and makes adjustments to processes as needed Utilizes a microscope to inspect parts and identify quality issues Refers to blueprints to ensure jobs are processed in accordance with specifications Monitors equipment to ensure that it is in proper working order. Recommends maintenance and repair Sets up jobs as appropriate Maintains a safe and healthy work environment by following standards and procedures; complying with legal regulations. Requirements 1-3 years of experience as a Machine Operator in a machining or high-tech manufacturing environment preferred. Educational background in light industrial trades and/or in a post-secondary vocational program is a plus. Mechanical aptitude necessary for loading fixtures and making adjustments to processes Demonstrated ability using windows based computers Ability to follow a number of trust-based policies Strong work ethic, is reliable to report to work every day, and works a full shift and overtime as needed. Flexible and willing to work on a variety of jobs depending on business need Analytical ability Detail orientation Background in promoting process improvement Strong oral and written communication skills Ability to interface with customers to troubleshoot issues and offer exceptional service Background in safety promotion and management Benefits: Medical/Dental/Vision Insurance, Short-Term Disability, Long-Term Disability, Life Insurance, Paid Vacation Days, Paid Holidays, 401k Please, No Recruitment Agency calls or emails (we are not using recruitment services for this, or any other role posted). Biomerics does not accept non-solicited resumes or candidate submittals from search/recruiting agencies not already on Biomerics approved agency list. Unsolicited resumes or candidate information submitted to Biomerics by search/recruiting agencies not already on Biomerics approved agency list shall become the property of Biomerics and if Biomerics subsequently hire the candidate, Biomerics shall not owe any fee to the submitting agency. Salary Description Starting $23/hour DOE

Are you interested in operating and maintaining various woodworking machinery to ensure the efficient and precise fabrication of our products? Workrite Ergonomics is looking for a machine operator to join our industry leading team in our Woodshop! Enjoy excellent pay and incentives at a company where you will be recognized and rewarded! Company Overview: Founded in 1991, Workrite Ergonomics is an industry leader in the design, manufacture and distribution of height-adjustable work centers and ergonomic office accessories, including adjustable keyboard platform systems and flat panel monitor support systems. What s In It for You? Benefits Start Day 1 (Medical, Dental, Vision, plus many more!) $22.00/hour Generous Vacation and Sick Time Off 11 Annual Company Paid Holidays 401K with Company Match Tuition Reimbursement Bonus and Merit opportunities 1st Shift: (6:00AM-2:30PM) What Will You Be Doing: Safe and correct set up and use of all equipment and processes including but not limited to: T molder, drill press, Kerf cutter, pin router, table saw and precision measuring tools Maintain standards set by quality assurance Understand and utilize detailed drawings, cut sheets, work instructions and job orders Assemble and package products Inspect parts and machinery for errors Use of all provided PPE (Personal protective equipment) as required for example, hearing protection, safety glasses and safety toe shoes Maintain a safe and clean work area Adhere to all safety regulations What Will You Bring: Entry Level Basic reading, writing and math skills Ability to learn and make transactions in an ERP system Ability to efficiently work in a high paced environment Speak, read, write, and understand basic English

Perform production activities that require the operation of machinery and equipment and understand the production process and the quality goals of the company. Support the organizational goals in achieving total customer satisfaction. Key Responsibilities: * Performs highly routine and respective production activities * Loads materials and unload products from production line and equipment * Understands and adheres all safety procedure * Informs appropriate personnel of material and equipment problem * Maintains simple logs of completed work * Knows your customer's expectations and drive section to meet them * Strong hands-on experience in Surface Mount Technology * Performs setup and runs the SMT Machines * Reads work instructions and C-CAM Job Qualifications: Education: Secondary, High School Experience: 5+ years manufacturing experience Required Skill: All machines related to manufacturing Job Competencies: * Must be able to read work instructions * Team work FabrinetWest including its subsidiaries, is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identify, age, disability, genetic information, veteran status, or any other characteristic protected by law.

Shift: 3rd shift, graveyard (shift begins: 10pm) * Job Summary: Performs a variety of inspection procedures to ensure quality levels at various stages of manufacturing at or above the standard. Support the organization goals in achieving total customer satisfaction. Key Responsibilities: * Inspect in-process or finished production assemblies and sub-assemblies for conformance to quality assurance standards * Working from blueprint, engineering change notices, or established operating procedures determine acceptance or rejection or rework requirements of a part * May evaluate new procedures for non-standard rest and perform special set-up on new equipment * Assist others in correcting or preventing deficiencies in quality or workmanship * Give work direction to other inspectors * Know your customers' expectations and drive action to meet them * Perform first article process * Identify component * Perform related work as assigned Job Qualifications: Education: Secondary/High School, Certificate Diploma Experience: 6+ Years preferably in Quality a plus Required skill: * PCBA Experienced * Able to use measurement equipment. * Must be able to read ECO/Dev instruction/build drawer and BOM. * Familiar with SMT and identify component, IPC 610 Knowledge and preferred IPC Cert. Familiar w/ First Piece and First Article process. Job Competencies: * Attention to detail * Communication skills - verbal and written * Organized and good critical thinking skills * Data collection, management and analysis * Team work * Ability to interpret complex customer rules and regulations * Demonstrated skills in project management and ability to train others to lead projects * Works well independently * Excellent interpersonal and communication skills * Ability to manage time and prioritize multiple task in a fast paced environment * Proficient in use of MS Office applications * Knowledge of Lean manufacturing fundamentals FabrinetWest including its subsidiaries, is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identify, age, disability, genetic

Performs a variety of inspection procedures to ensure quality levels at various stages of manufacturing at or above the standard. Support the organization goals in achieving total customer satisfaction. Key Responsibilities: * Inspect in-process or finished production assemblies and sub-assemblies for conformance to quality assurance standards * Working from blueprint, engineering change notices, or established operating procedures determine acceptance or rejection or rework requirements of a part * May evaluate new procedures for non-standard rest and perform special set-up on new equipment * Assist others in correcting or preventing deficiencies in quality or workmanship * Give work direction to other inspectors * Know your customers' expectations and drive action to meet them * Perform first article process * Identify component * Perform related work as assigned Job Qualifications: Education: Secondary/High School, Certificate Diploma Experience: 6+ Years preferably in Quality a plus Required skill: * PCBA Experienced * Able to use measurement equipment. * Must be able to read ECO/Dev instruction/build drawer and BOM. * Familiar with SMT and identify component, IPC 610 Knowledge and preferred IPC Cert. Familiar w/ First Piece and First Article process. Job Competencies: * Attention to detail * Communication skills - verbal and written * Organized and good critical thinking skills * Data collection, management and analysis * Team work * Ability to interpret complex customer rules and regulations * Demonstrated skills in project management and ability to train others to lead projects * Works well independently * Excellent interpersonal and communication skills * Ability to manage time and prioritize multiple task in a fast paced environment * Proficient in use of MS Office applications * Knowledge of Lean manufacturing fundamentals FabrinetWest including its subsidiaries, is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identify, age, disability, genetic

Job Description Performs a variety of inspection procedures to ensure quality levels at various stages of manufacturing at or above the standard. Support the organization goals in achieving total customer satisfaction. Key Responsibilities: Inspect in-process or finished production assemblies and sub-assemblies for conformance to quality assurance standards Working from blueprint, engineering change notices, or established operating procedures determine acceptance or rejection or rework requirements of a part May evaluate new procedures for non-standard rest and perform special set-up on new equipment Assist others in correcting or preventing deficiencies in quality or workmanship Give work direction to other inspectors Know your customers' expectations and drive action to meet them Perform first article process Identify component Perform related work as assigned Job Qualifications: Education: Secondary/High School, Certificate Diploma Experience: 6+ Years preferably in Quality a plus Required skill: PCBA Experienced Able to use measurement equipment. Must be able to read ECO/Dev instruction/build drawer and BOM. Familiar with SMT and identify component, IPC 610 Knowledge and preferred IPC Cert. Familiar w/ First Piece and First Article process. Job Competencies: Attention to detail Communication skills - verbal and written Organized and good critical thinking skills Data collection, management and analysis Team work Ability to interpret complex customer rules and regulations Demonstrated skills in project management and ability to train others to lead projects Works well independently Excellent interpersonal and communication skills Ability to manage time and prioritize multiple task in a fast paced environment Proficient in use of MS Office applications Knowledge of Lean manufacturing fundamentals FabrinetWest including its subsidiaries, is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identify, age, disability, genetic

Johanson Technology Inc. (JTI) is looking for a Machine Operators. Will be responsible for setting up and operation production machines. Hourly Rate (Non-Exempt): $18.25 - $19.00per hour (DOE) Work Schedule (Monday-Friday) 11:15 p.m. - 7:17 a.m. Training for this position will be scheduled for up to 6 weeks during the 1st shift schedule (7:00 a.m. - 3:30 p.m.) prior to working on or 3rd shift (11:15 p.m. - 7:15 a.m.) Company Offer Benefits: Medical (HMO/PPO/HSA) Dental (HMO/PPO) Vision Company Paid Basic Life Insurance Supplemental Life Insurance Paid time off (i.e. Vacation, Sick, Holiday, and Bereavement) 401k Savings plus company match Tuition Assistance Required Education and Experience: High school diploma or GED Experience in setting up and operating semi-automated machines At least three (3) months in a manufacturing environment Some experience using a Microscope Basic computer skills Good math skills Good verbal and written communication skills Preferred Education and Experience: Experience with ADT 7122- dicing saw machines Some Vocational school emphasizes in electronics Working in a Clean Room Environment Hand-on experience with Comma Coater or NCC machine Essential Functions: Upload program instructed on the traveler to stack sheets of dielectric material. Stackers are responsible for stacking sheets of dielectric material. Read the travelers to ensure that they are following correct build-up design and correct dielectric type. Read and locate program files and data recording in SPC Data Entry are required for this position. Inspection of stacked bars through the microscope. Remove, install and maintain flanges, blade change, balance, and set up programs. Inspect each part to ensure that cuts are the correct specifications. Work closely with Engineering to ensure that yields are as expected and ensure machines function properly. Ensure that cuts are the correct specifications. Will assist in performing preventative maintenance on the machines Physical And Mental Demands The physical and mental demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Use of microscope, 25% of shift Standing/Walking 90% of shift; Sitting 10% of the shift Twisting of neck and waist 90% of shift Reaching above shoulder, and simple hand grasping up to 20% of shift. Stoop and bend, reaching above shoulder, and simple hand grasping up to 90% of shift. Lift, push, pull, and/or move up to 50 lbs, 50% of the shift Will occasionally work in fast paced environment and demonstrate adaptability Must understand and follow a set of clear verbal and/or written procedures without deviation. Must adhere to a provided work schedule to meet a set of qualitative production standards. Interact with co-workers to complete tasks. Perform assigned tasks. Ability to act with integrity and professionalism EEO Statement Johanson Technology Inc., and Johanson Dielectrics Inc. is an Equal Employment Opportunity Employer to all without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. Discrimination of any type will not be tolerated. Other Duties Please note this job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. If you are interested in the Machine Operator position please submit your resume ******************************************************** To learn more about Johanson Technology's products, services, and culture, visit our websites at ************************** and **************************** Johanson Technology Inc., and Johanson Dielectrics Inc. are Equal Opportunity Employer/Veterans/Disabled Job Posted by ApplicantPro

Johanson Technology Inc. (JTI) is looking for a Machine Operators. Will be responsible for setting up and operation production machines. Hourly Rate (Non-Exempt): $18.25 - $19.00per hour (DOE) Work Schedule (Monday-Friday) 11:15 p.m. - 7:17 a.m. Training for this position will be scheduled for up to 6 weeks during the 1st shift schedule (7:00 a.m. - 3:30 p.m.) prior to working on or 3rd shift (11:15 p.m. - 7:15 a.m.) Company Offer Benefits: Medical (HMO/PPO/HSA) Dental (HMO/PPO) Vision Company Paid Basic Life Insurance Supplemental Life Insurance Paid time off (i.e. Vacation, Sick, Holiday, and Bereavement) 401k Savings plus company match Tuition Assistance Required Education and Experience: High school diploma or GED Experience in setting up and operating semi-automated machines At least three (3) months in a manufacturing environment Some experience using a Microscope Basic computer skills Good math skills Good verbal and written communication skills Preferred Education and Experience: Experience with ADT 7122- dicing saw machines Some Vocational school emphasizes in electronics Working in a Clean Room Environment Hand-on experience with Comma Coater or NCC machine Essential Functions: Upload program instructed on the traveler to stack sheets of dielectric material. Stackers are responsible for stacking sheets of dielectric material. Read the travelers to ensure that they are following correct build-up design and correct dielectric type. Read and locate program files and data recording in SPC Data Entry are required for this position. Inspection of stacked bars through the microscope. Remove, install and maintain flanges, blade change, balance, and set up programs. Inspect each part to ensure that cuts are the correct specifications. Work closely with Engineering to ensure that yields are as expected and ensure machines function properly. Ensure that cuts are the correct specifications. Will assist in performing preventative maintenance on the machines Physical And Mental Demands The physical and mental demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Use of microscope, 25% of shift Standing/Walking 90% of shift; Sitting 10% of the shift Twisting of neck and waist 90% of shift Reaching above shoulder, and simple hand grasping up to 20% of shift. Stoop and bend, reaching above shoulder, and simple hand grasping up to 90% of shift. Lift, push, pull, and/or move up to 50 lbs, 50% of the shift Will occasionally work in fast paced environment and demonstrate adaptability Must understand and follow a set of clear verbal and/or written procedures without deviation. Must adhere to a provided work schedule to meet a set of qualitative production standards. Interact with co-workers to complete tasks. Perform assigned tasks. Ability to act with integrity and professionalism EEO Statement Johanson Technology Inc., and Johanson Dielectrics Inc. is an Equal Employment Opportunity Employer to all without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. Discrimination of any type will not be tolerated. Other Duties Please note this job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. If you are interested in the Machine Operator position please submit your resume ******************************************************** To learn more about Johanson Technology's products, services, and culture, visit our websites at ************************** and **************************** Johanson Technology Inc., and Johanson Dielectrics Inc. are Equal Opportunity Employer/Veterans/Disabled

Johanson Technology Inc. (JTI) is looking for a Machine Operator (NCC Stacker) for our shift. The selected candidate will be responsible for setting up and operating the stacking machine. Hourly Rate (Non-Exempt): $18.25 - $19.00/per hour (DOE) Work Schedule: 7:00 a.m. - 3:30 p.m. Company Offer Benefits: Medical (HMO/PPO/HSA) Dental (HMO/PPO) Vision Company Paid Basic Life Insurance Supplemental Life Insurance Paid time off (i.e. Vacation, Sick, Holiday, and Bereavement) 401k Savings plus company match Tuition Assistance REQUIRED EDUCATION AND EXPERIENCE High school diploma or GED Some experience in setting up and operating semi-automated machines. Some experience in working in a manufacturing environment. Some experience using a Microscope Basic computer skills Good math skills Good verbal and written communication skills PREFERRED EDUCATION AND EXPERIENCE: Working in a Clean Room Environment ESSENTIAL FUNCTIONS: Upload program instructed on the traveler to stack sheets of dielectric material. Stackers are responsible for stacking sheets of dielectric material. Read the travelers to ensure that they are following correct build-up design and correct dielectric type. Read and locate program files and data recording in SPC Data Entry are required for this position. Inspection of stacked bars through the microscope. Physical AND MENTAL Demands Use of microscope, 25% of shift Standing/Walking 80% of shift; Sitting 20% of the shift Twisting of neck and waist 10% of shift Reaching above shoulder, and simple hand grasping up to 20% of shift. Stoop, and bend 10% of the shift. Lift, push, pull, and/or move up to 50 lbs, 10% of the shift Will occasionally work in fast paced environment and demonstrate adaptability Must understand and follow a set of clear verbal and/or written procedures without deviation. Must adhere to a provided work schedule to meet a set of qualitative production standards. Interact with co-workers to complete tasks. EEO STATEMENT Johanson Technology Inc., and Johanson Dielectrics Inc. is an Equal Employment Opportunity Employer to all without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. Discrimination of any type will not be tolerated. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. If you are interested, please submit your resume ****************************************************** / To learn more about Johanson Technology's products, services, and culture, visit our websites at ************************** and *************************** . Johanson Technology Inc., and Johanson Dielectrics Inc. are Equal Opportunity Employer/Veterans/Disabled

Johanson Technology Inc. (JTI) is looking for: Machine Operator - operates the isostatic lamination machine by loading parts/operate vacuum sealer. Production Worker - responsible for performing spreading/releasing parts in Kiln Room. Hourly Rate (Non-Exempt): $17.75 - $18.50per hour (DOE) Work Schedule (Monday-Friday) 3:30 p.m. - 12:00 a.m. Training for this position will be scheduled for up to 3 weeks during the 1st shift schedule (7:00 a.m. - 3:30 p.m.) prior to working on 2nd shift (11:15 p.m. - 7:15 a.m.) Company Offer Benefits: Medical (HMO/PPO/HSA) Dental (HMO/PPO) Vision Company Paid Basic Life Insurance Supplemental Life Insurance Paid time off (i.e. Vacation, Sick, Holiday, and Bereavement) 401k Savings plus company match Tuition Assistance Required Education and Experience: High school diploma or GED At least three (3) months in a manufacturing environment Some experience using a Microscope Basic computer skills Good math skills Good verbal and written communication skills Preferred Education and Experience: Experience in an electronic component manufacturing environment. Essential Functions for Machine Operator: Sample and check temperature and water level. Maintenance of oil pins and pressure grease the pin. Package plates in sealed bags; plates are packaged and sealed two (2) per bag. Inspect lamination bags for defects before using. Loading and unloading material onto setters. Essential Functions for Production Worker: Spread part in the setters, either manually or machine per traveler requirements. Release parts, rolling parts by hand. Complete travelers before forwarding to next department. Cross training for other jobs is required so that employees can occasionally fill-in other departments, when required. Physical And Mental Demands The physical and mental demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Use of microscope, 5% of shift Standing/Walking 90% of shift; Sitting up to 10% Stoop and bend. 60% of shift; Twisting of neck and waist 80% of shift. Frequent movement going up and down a three (3) step platform to access the machine up to 40% of shift. Occasionally required to lift, push, pull, and/or move - up to 35 lbs up to 50%. Simple hand grasping up to 90% of shift; Fine hand manipulation 5% of shift. Will occasionally work in fast paced environment and demonstrate adaptability Must understand and follow a set of clear verbal and/or written procedures without deviation. Must adhere to a provided work schedule to meet a set of qualitative production standards. Interact with co-workers to complete tasks Ability to act with integrity and professionalism Perform assigned tasks Work Environment This job operates in a manufacturing/warehouse environment and will occasionally be exposed to hot working environment. This role is exposed to chemicals and will use protective equipment such as an apron, gloves, and eyewear (when cleaning). This role occasionally uses standard office equipment such as computers and photocopiers. EEO Statement Johanson Technology Inc., and Johanson Dielectrics Inc. is an Equal Employment Opportunity Employer to all without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. Discrimination of any type will not be tolerated. Other Duties Please note this job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. If you are interested, please submit your resume ******************************************************** To learn more about Johanson Technology's products, services, and culture, visit our websites at ************************** and **************************** Johanson Technology Inc., and Johanson Dielectrics Inc. are Equal Opportunity Employer/Veterans/Disabled

Johanson Technology Inc. (JTI) is looking for: Machine Operator - operates the isostatic lamination machine by loading parts/operate vacuum sealer. Production Worker - responsible for performing spreading/releasing parts in Kiln Room. Hourly Rate (Non-Exempt): $17.75 - $18.50per hour (DOE) Work Schedule (Monday-Friday) 3:30 p.m. - 12:00 a.m. Training for this position will be scheduled for up to 3 weeks during the 1st shift schedule (7:00 a.m. - 3:30 p.m.) prior to working on 2nd shift (11:15 p.m. - 7:15 a.m.) Company Offer Benefits: Medical (HMO/PPO/HSA) Dental (HMO/PPO) Vision Company Paid Basic Life Insurance Supplemental Life Insurance Paid time off (i.e. Vacation, Sick, Holiday, and Bereavement) 401k Savings plus company match Tuition Assistance Required Education and Experience: High school diploma or GED At least three (3) months in a manufacturing environment Some experience using a Microscope Basic computer skills Good math skills Good verbal and written communication skills Preferred Education and Experience: Experience in an electronic component manufacturing environment. Essential Functions for Machine Operator: Sample and check temperature and water level. Maintenance of oil pins and pressure grease the pin. Package plates in sealed bags; plates are packaged and sealed two (2) per bag. Inspect lamination bags for defects before using. Loading and unloading material onto setters. Essential Functions for Production Worker: Spread part in the setters, either manually or machine per traveler requirements. Release parts, rolling parts by hand. Complete travelers before forwarding to next department. Cross training for other jobs is required so that employees can occasionally fill-in other departments, when required. Physical And Mental Demands The physical and mental demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Use of microscope, 5% of shift Standing/Walking 90% of shift; Sitting up to 10% Stoop and bend. 60% of shift; Twisting of neck and waist 80% of shift. Frequent movement going up and down a three (3) step platform to access the machine up to 40% of shift. Occasionally required to lift, push, pull, and/or move - up to 35 lbs up to 50%. Simple hand grasping up to 90% of shift; Fine hand manipulation 5% of shift. Will occasionally work in fast paced environment and demonstrate adaptability Must understand and follow a set of clear verbal and/or written procedures without deviation. Must adhere to a provided work schedule to meet a set of qualitative production standards. Interact with co-workers to complete tasks Ability to act with integrity and professionalism Perform assigned tasks Work Environment This job operates in a manufacturing/warehouse environment and will occasionally be exposed to hot working environment. This role is exposed to chemicals and will use protective equipment such as an apron, gloves, and eyewear (when cleaning). This role occasionally uses standard office equipment such as computers and photocopiers. EEO Statement Johanson Technology Inc., and Johanson Dielectrics Inc. is an Equal Employment Opportunity Employer to all without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. Discrimination of any type will not be tolerated. Other Duties Please note this job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. If you are interested, please submit your resume ******************************************************** To learn more about Johanson Technology's products, services, and culture, visit our websites at ************************** and **************************** Johanson Technology Inc., and Johanson Dielectrics Inc. are Equal Opportunity Employer/Veterans/Disabled Job Posted by ApplicantPro

Job Description ROLE AND RESPONSIBILITIES Machine Operators I must have a strong understanding of the machines they work with and are responsible for ensuring our company produces on-time quality parts for our customers. In-depth training may be required to prepare a Machine Operator for their daily duties. The essential duties and responsibilities include, but are not limited to: • Ability to start and stop the machine safely without supervision. • Ability to place unfinished parts and remove finished parts from machine safely. • Monitor machine operation. • Check part quality with designated measurement instruments. Understand when and how to stop machine safely. • Assist in the maintenance, and repair of machinery. • Operate tools and machinery to aid the manufacturing process. • Perform periodic checks on equipment and troubleshoot issues as they arise. • Oversee the machine while executing tasks and make necessary adjustments to improve results. • Produce quality parts according to manufacturing targets and schedules as directed by the Plant Manager. • Record all machine actions and log completed parts for record keeping. • Assume responsibility for ensuring the duties of this position are performed in a safe and efficient manner. • Keep a clean and orderly work area. • Perform other duties that may be assigned by the Plant Manager. QUALIFICATIONS AND EDUCATION REQUIREMENTS • To perform this job successfully, an individual must be willing to learn and improve to perform each essential duty satisfactorily. • High school diploma or GED required. Adequate work experience may be substituted in lieu of diploma or GED. • Willingness to follow written or oral work instructions and perform repetitive tasks for extended periods of time. PREFERRED SKILLS • Previous machine operating experience in a manufacturing facility. • Familiarity of various manufacturing tools and machinery including but not limited to facers, lathes, CNC's, and other mechanical machinery. • Bilingual language skills in English and Spanish. • Ability to work well with others, be organized and detail-oriented. • Ability to lift heavy equipment, to bend, and to stand or walk for long periods of time. • Willingness to work in shifts that may include early or late hours, weekends, or overtime if necessary. ADDITIONAL NOTES • Satisfactory pre-employment drug testing is required. • All applicants must be authorized to work in the U.S. COMPENSATION AND BENEFITS • After 30 days of employment, employee is eligible for company benefits including medical, dental, vision, sick pay, vacation accruals, and 401(k).

We're looking for a reliable, detail-oriented individual to operate punch press machines in a manufacturing environment. This is an entry-level role, and training will be provided. Ideal for someone who enjoys hands-on work, learning new skills, and being part of a production team. Responsibilities: Operate punch press machines according to safety and production guidelines Load and unload materials from the machine Inspect parts for accuracy, defects, and quality standards Follow work orders, diagrams, and basic instructions Complete production records and maintain a clean work area Assist with basic machine setup and adjustments (with training) Report any mechanical issues or safety concerns to supervisors Requirements: 6 months machine operating experience required; manufacturing experience is a plus Ability to read basic measurements and follow written instructions Comfortable standing for long periods and lifting up to 30-50 lbs Strong attention to detail and willingness to learn Safety-conscious and dependable Benefits: • Medical insurance • Paid time off • 401(K) • Direct deposit • Pay card options • Employee Perks Program • Fortuna (offers wages on demand) You should be proficient in: Manual Machining Skills Machines & technologies you'll use: Punch Press Laser Punch Press Salary info: $16.50 - $17 / hr

ROLE AND RESPONSIBILITIES Machine Operators I must have a strong understanding of the machines they work with and are responsible for ensuring our company produces on-time quality parts for our customers. In-depth training may be required to prepare a Machine Operator for their daily duties. The essential duties and responsibilities include, but are not limited to: • Ability to start and stop the machine safely without supervision. • Ability to place unfinished parts and remove finished parts from machine safely. • Monitor machine operation. • Check part quality with designated measurement instruments. Understand when and how to stop machine safely. • Assist in the maintenance, and repair of machinery. • Operate tools and machinery to aid the manufacturing process. • Perform periodic checks on equipment and troubleshoot issues as they arise. • Oversee the machine while executing tasks and make necessary adjustments to improve results. • Produce quality parts according to manufacturing targets and schedules as directed by the Plant Manager. • Record all machine actions and log completed parts for record keeping. • Assume responsibility for ensuring the duties of this position are performed in a safe and efficient manner. • Keep a clean and orderly work area. • Perform other duties that may be assigned by the Plant Manager. QUALIFICATIONS AND EDUCATION REQUIREMENTS • To perform this job successfully, an individual must be willing to learn and improve to perform each essential duty satisfactorily. • High school diploma or GED required. Adequate work experience may be substituted in lieu of diploma or GED. • Willingness to follow written or oral work instructions and perform repetitive tasks for extended periods of time. PREFERRED SKILLS • Previous machine operating experience in a manufacturing facility. • Familiarity of various manufacturing tools and machinery including but not limited to facers, lathes, CNC's, and other mechanical machinery. • Bilingual language skills in English and Spanish. • Ability to work well with others, be organized and detail-oriented. • Ability to lift heavy equipment, to bend, and to stand or walk for long periods of time. • Willingness to work in shifts that may include early or late hours, weekends, or overtime if necessary. ADDITIONAL NOTES • Satisfactory pre-employment drug testing is required. • All applicants must be authorized to work in the U.S. COMPENSATION AND BENEFITS • After 30 days of employment, employee is eligible for company benefits including medical, dental, vision, sick pay, vacation accruals, and 401(k).

ROLE AND RESPONSIBILITIES Machine Operators I must have a strong understanding of the machines they work with and are responsible for ensuring our company produces on-time quality parts for our customers. In-depth training may be required to prepare a Machine Operator for their daily duties. The essential duties and responsibilities include, but are not limited to: • Ability to start and stop the machine safely without supervision. • Ability to place unfinished parts and remove finished parts from machine safely. • Monitor machine operation. • Check part quality with designated measurement instruments. Understand when and how to stop machine safely. • Assist in the maintenance, and repair of machinery. • Operate tools and machinery to aid the manufacturing process. • Perform periodic checks on equipment and troubleshoot issues as they arise. • Oversee the machine while executing tasks and make necessary adjustments to improve results. • Produce quality parts according to manufacturing targets and schedules as directed by the Plant Manager. • Record all machine actions and log completed parts for record keeping. • Assume responsibility for ensuring the duties of this position are performed in a safe and efficient manner. • Keep a clean and orderly work area. • Perform other duties that may be assigned by the Plant Manager. QUALIFICATIONS AND EDUCATION REQUIREMENTS • To perform this job successfully, an individual must be willing to learn and improve to perform each essential duty satisfactorily. • High school diploma or GED required. Adequate work experience may be substituted in lieu of diploma or GED. • Willingness to follow written or oral work instructions and perform repetitive tasks for extended periods of time. PREFERRED SKILLS • Previous machine operating experience in a manufacturing facility. • Familiarity of various manufacturing tools and machinery including but not limited to facers, lathes, CNC's, and other mechanical machinery. • Bilingual language skills in English and Spanish. • Ability to work well with others, be organized and detail-oriented. • Ability to lift heavy equipment, to bend, and to stand or walk for long periods of time. • Willingness to work in shifts that may include early or late hours, weekends, or overtime if necessary. ADDITIONAL NOTES • Satisfactory pre-employment drug testing is required. • All applicants must be authorized to work in the U.S. COMPENSATION AND BENEFITS • After 30 days of employment, employee is eligible for company benefits including medical, dental, vision, sick pay, vacation accruals, and 401(k).

Job Description ROLE AND RESPONSIBILITIES Machine Operators I must have a strong understanding of the machines they work with and are responsible for ensuring our company produces on-time quality parts for our customers. In-depth training may be required to prepare a Machine Operator for their daily duties. The essential duties and responsibilities include, but are not limited to: • Ability to start and stop the machine safely without supervision. • Ability to place unfinished parts and remove finished parts from machine safely. • Monitor machine operation. • Check part quality with designated measurement instruments. Understand when and how to stop machine safely. • Assist in the maintenance, and repair of machinery. • Operate tools and machinery to aid the manufacturing process. • Perform periodic checks on equipment and troubleshoot issues as they arise. • Oversee the machine while executing tasks and make necessary adjustments to improve results. • Produce quality parts according to manufacturing targets and schedules as directed by the Plant Manager. • Record all machine actions and log completed parts for record keeping. • Assume responsibility for ensuring the duties of this position are performed in a safe and efficient manner. • Keep a clean and orderly work area. • Perform other duties that may be assigned by the Plant Manager. QUALIFICATIONS AND EDUCATION REQUIREMENTS • To perform this job successfully, an individual must be willing to learn and improve to perform each essential duty satisfactorily. • High school diploma or GED required. Adequate work experience may be substituted in lieu of diploma or GED. • Willingness to follow written or oral work instructions and perform repetitive tasks for extended periods of time. PREFERRED SKILLS • Previous machine operating experience in a manufacturing facility. • Familiarity of various manufacturing tools and machinery including but not limited to facers, lathes, CNC's, and other mechanical machinery. • Bilingual language skills in English and Spanish. • Ability to work well with others, be organized and detail-oriented. • Ability to lift heavy equipment, to bend, and to stand or walk for long periods of time. • Willingness to work in shifts that may include early or late hours, weekends, or overtime if necessary. ADDITIONAL NOTES • Satisfactory pre-employment drug testing is required. • All applicants must be authorized to work in the U.S. COMPENSATION AND BENEFITS • After 30 days of employment, employee is eligible for company benefits including medical, dental, vision, sick pay, vacation accruals, and 401(k).