Welder/Machinist jobs at HOLT Texas - 160 jobs

Job Description Job Summary: The Field Welder Technician 3 (Line bore) works independently to perform all aspects of welding repairs, fabrication, torch work, and line boring on heavy equipment and components utilizing Holt, Caterpillar and AWS Welding Procedures, Standards and Codes in both a shop and field environment. This position will quote jobs, break down prints and procedures to build a material list, order material and provide training to other team members. In addition to removal, installation, and the repair of heavy equipment components, including undercarriage. The incumbent in this position shall model the following practices daily: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions: Models, promotes, and reinforces the consistent use of HOLT's Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission. Performs all aspects of welding (FCAW, SMAW and GTAW, fabricating, cutting, line boring and is very mechanically inclined and can remove, repair, and install all components associated with the repairs in a field or shop environment with no direct supervision. Assists leadership with the evaluation and quoting of projects, in the shop and field environment. Acts on behalf of leadership in their absence, leading others in the accomplishment of tasks by directing and managing on site resources. Performs work order maintenance regularly in conjunction with the supervisor or lead. Leads projects in the development, implementation, and execution of new business opportunities. Obtains additional welder qualifications as required or requested by the customer or project requirements. Demonstrates the knowledge and willingness to work in any department that needs assistance. Pursues on-going self-development, classroom training and on-the-job training. Makes decisions, recommendations, commitments and implements new ways of approaching projects. Develops procedures and techniques for performing complex fabrications or repairs. Provides recommendations for equipment needed to perform tasks. Collaborates with leadership on large purchases. Works safely at all times while consistently adhering to company policies, procedures and standards internally as well as externally when representing our organization. Performs other duties assigned. Knowledge, Skills, and Abilities: Expert knowledge of equipment and dimensional tools, including their designs, uses, repair and maintenance. Advanced knowledge of specification and drawing interpretations. Expert knowledge with Holt current computer software, related hardware, and machine electronic systems. Excellent work habits, accuracy and an exceptional attention to detail and quality of work and awareness. Knowledgeable in the various methods of Non-Destructive-Testing methods. Highly developed technical skills as a welder and fabricator with a demonstrated ability to effectively perform any assigned welding tasks. Advanced verbal and written communication skills. Advanced influencing skill, critical thinking, and problem-solving skills with an excellent mechanical aptitude. Adaptable to changing schedules and exhibits time management skills. Ability to follow logical troubleshooting and standard operating procedures when performing welding fabrication and repairs. Proficient experience in a heavy equipment environment and required to operate several different machines and heavy equipment including forklifts. Ability to follow manufacturer and company installation and service guidelines to ensure quality work. Ability to operate hand tools, power tools, pneumatic tools, and equipment used in fabrication and welding. Ability to be a self-starter, self-motivated and be a leader with an exceptional safety record. Ability to read, write, and understand information with the ability to follow directions and procedures. Demonstrates all skills or requirements of lower tech level jobs within the department. Additional Requirements: Valid Driver's license required. Ability to obtain a valid Commercial Driver's License (CDL Class B or above) within 120 days of start of the position must have an acceptable driving record. Advanced Blueprint AWS Certified Welding Inspector (CWI) ASNT VT, PT, MT Certifications Ongoing Safety training Leadership training Education and Experience: High school diploma or equivalent required; with additional specialized/technical training or some college courses (Welding Technology) preferred. Eight or more years or heavy equipment welding, fabrication, line boring experience - REQUIRED One year supervisory/lead experience required, three or more years preferred Flux Cored Arc Welding (FCAW) 1” 3G and 4G on both A36 and T1 Shielded Metal Arc Welding (SMAW) 1” 3G and 4G on both A36 and T1 Gas Tungsten Arc Welding (GTAW) 3/8” 3G and 4G Link belt Crane - Welding Qualification First Aid/CPR; Confined Space Entry; Methane/O2 Deficiency Certification MSHA Certification or able to obtain certification within 30 days of starting Supervisory Responsibilities: None Travel: Required with a potential for multiple overnight stays, 20%-40%. Physical Requirements: Ability to function, work around and with welding machines, service trucks, mobile cranes, overhead cranes, cutting torches and gauges, fit up and layout tools, forklifts and material handling equipment, hand grinder/sander and air tools. Ability to move objects and use abdominal and lower back muscles to provide support over time without fatigue. Frequently moves materials weighing up to 50 lb., anything more requires a team lift, or a mechanical lift. Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina. Ascends/descends with gradual or continuous progress by oneself using hands/feet while maintaining at least three points of contact to climb up/down ladders and/or equipment. Be able to maneuver safely and work underneath equipment. Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work. Significant amount of time standing and walking; at times kneeling, crouching, stooping, climbing, and reaching. Work Environment: Requires wearing common protective or safety equipment. Regularly works outdoors around moving mechanical parts and noise level may be loud at times. May be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and moisture/humidity. Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high-speed rotating equipment. Occasionally performs work in cramped spaces and/or high places. Daily interaction with internal/external customers and vendors; frequently interacts outside organizations. Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-HCT LI-JH1 #HOLTCAT #CAT #CATERPILLAR #HeavyEquipment #Lineboring #Fabrication

Job Posting Start Date 12-10-2025 Job Posting End Date 03-23-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a CNC Machinist located in Austin, TX. 1st Shift: 4X10 6:00am - 4:30pm Tuesday-Friday Job Description: · Setup and operate various conventional machine shop equipment such as lathes, mills, grinders, vertical and horizontal saws to produce and detail a variety of small parts, ranging from simple to complex, which are within prescribed tolerances and hold to finishes specifications. · Must be able to setup and operates Computer Numerical Control (CNC) Mazak vertical mills with Mazatrol. · Work with priority listings to complete fixtures/parts as required for production floor. · Accurately read 3 dimensional drawings and blueprints and be able to setup manual machines to within tolerance specified to produce products/fixtures. · Performs machine set-ups, adjusting speeds, feeds, and depth of cut, to machined parts to specifications set forth in blueprints, drawings, engineering orders, etc. · Checks machined parts for conformance to prescribed tolerances . · Make edits to CNC programming at machine controls if needed. · Must understand GD&T Must be able to use measurement equipment Here are a few of our preferred experiences: · Manufacturing previous experience · Flexflow What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryOperations Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Job Posting Start Date 01-09-2026 Job Posting End Date Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a Structural Welder located in Dallas, Texas. Reporting to the Structural Welding Supervisor, the Structural Welder will be responsible for welding structural steel (c-channels) to fabricate the framing for sheet metal enclosure buildings using welding equipment and techniques. This position uses the FCAW process. 1st shift: Monday - Friday, 6:00 AM - 2:30 PM What a typical day looks like: Plans details of work order procedures; gathers required tools and materials based on instructions and specifications provided for the job. Lay out, position, align, and secure parts prior to assembly Weld structural steel (c-channels) in flat, vertical, or overhead positions using welding techniques and equipment Clamp, hold, or tack weld parts to obtain required configurations and positions for welding Determine required equipment and welding techniques, applying knowledge of metallurgy, geometry, and welding techniques Maintains, organizes, and cleans equipment and the work area. Notifies supervisor when faulty equipment or defective materials are discovered. Complete all other duties as assigned The experience we're looking to add to our team: High School Diploma or equivalent Completion of a formal apprenticeship OR 2+ years' experience in dual shield welding process Certification required: AWS D1.1 FCAW (Flux Core Arc Welding) Physical Requirements: Must be able to pass respirator fit test Must wear PPE, such as respirator, welding equipment, gloves, safety glasses, hard hat, and ear protection, while working on the production floor Must be able to weld components that are vertical, flat, or overhead Must have enough manual dexterity and stability as required for precision work. Must be able to see details at close range Must be able to lift up to 35 pounds at times Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryOperations Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

2551 Valmont Dr Brenham Texas 77833-5418 **_Why Valmont_** **We're Here to Move the World Forward.** Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a _Fortune_ 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. _We are the modern workforce_ . Are you ready to move the world forward? Apply now. **A Brief Summary of This Position:** Under the direction of the Production Supervisor or Department Lead Person, the Welder Helper will assist with moving and placing of material and product at predetermined places by means of overhead cranes and forklifts. This person will rework and weld component parts by grinding and/or welding to blueprint specifications. **Shift: 3rd shift (Nights) Monday-Friday 11PM-7AM** **Starting Hourly Pay Rate (LG4): $19.65 + $1.00 per hour shift differential** **Opportunity for step pay increases at 90 days, 1 year & 2 years** **Essential Functions:** + Comply 100% with PPE requirements and actively participate in department safety, demonstrate excellent safety practices and behaviors which conform to all Valmont safety policies and procedures + Clean and grind parts (debur) as needed and cut metals to predetermined sizes and tolerances. + Use common shop manufacturing math to include adding, subtracting, multiplying, dividing fractions and conversion of decimals + Determine the center of an object using basic measuring skills and shop mathematics + Perform operator preventative maintenance on overhead crane, forklift, and welding/ cutting equipment + Safely use overhead crane to properly position product for welding or grinding + Comply with direction from Shop Supervisor and Lead Person + Perform routing machine operations such as feeding or unloading a machine, and assisting worker by holding materials or tools. + Pass a 1G v-groove weld test using GMAW and maintain certification + Safely operate band saw for cutting raw material product according to drawing + Other duties as assigned **Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities):** + Must be able to pass Valmont endorsed 1G flat weld certification test + Six months of previous hands-on welding experience in a professional environment + Must be proficient at math to include adding, subtracting, multiplying, dividing fractions and conversion of decimals + Must be able to accurately read a measuring tape + Maintain high awareness for safety at all times + Read, write, and/or speak English + Must be able to communicate and interact with coworkers in a positive manner + The ability to work in a high volume, fast paced environment + Must be a person of passion and integrity who has the drive to excel and deliver exceptional results **Highly Qualified Candidates Will Also Possess These Qualifications:** + High School Diploma or GED equivalent + Current Valmont endorsed 1G flat weld certification + One year of previous experience in a manufacturing or fabrication environment + One year of previous hands-on welding experience in a professional environment + American Welding Society (AWS) welding certification from a recognized school **Working Environment and Physical Efforts:** Ambient temperatures in work area coincide with seasonal weather changes. Exposure to metal and smoke fumes due to surrounding processes. Abnormal noise level throughout the shop requiring that hearing protection worn at all times. Direct exposure to dirt, grease, mill scale, cutting fluid, rust inhibitors, and metal particles and splinters. Incumbent will also be exposed to production facilities where specific PPE will be required such as hand, hearing, foot, eye, and head protection. There will also be frequent exposure to outside elements for short periods of time. Being outside will also expose them to material handling equipment such as forklifts, straddle trucks, and shag trucks. **Benefits** Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: + Healthcare (medical, prescription drugs, dental and vision) + 401k retirement plan with company match + Paid time off + Employer paid life insurance + Employer paid short-term and long-term disability including maternity leave + Work Life Support + Tuition Reimbursement up to $5,250 per year + Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************. Valmont is here to modernize vital infrastructure and increase agricultural productivity, sustainably and reliably. We galvanize steel to last a century with minimal environmental impact. We modernize irrigation to feed a growing population by utilizing the latest technology. We harden the electrical grid to enable the delivery of reliable power to millions of homes around the world. And we help make communities everywhere safer, cleaner and more connected through our smart infrastructure technology. Valmont serves two primary markets - agriculture and infrastructure - and seven diverse product lines: Utility, Lighting and Transportation, Telecom, Solar, Coatings, Irrigation and Ag Tech. We manufacture products in 85 facilities spread across six continents, and we do business in 100 different countries. That's what Valmont does. We conserve resources and improve life, finding ways to make innovation and technology beneficial in the real world. + That's the value we add.

2551 Valmont Dr Brenham Texas 77833-5418 Why Valmont We're Here to Move the World Forward. Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a Fortune 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. We are the modern workforce . Are you ready to move the world forward? Apply now. A Brief Summary of This Position: Under the direction of the Production Supervisor or Department Lead Person, the Welder Helper will assist with moving and placing of material and product at predetermined places by means of overhead cranes and forklifts. This person will rework and weld component parts by grinding and/or welding to blueprint specifications. Shift: 3rd shift (Nights) Monday-Friday 11PM-7AM Starting Hourly Pay Rate (LG4): $19.65 + $1.00 per hour shift differential Opportunity for step pay increases at 90 days, 1 year & 2 years Essential Functions: Comply 100% with PPE requirements and actively participate in department safety, demonstrate excellent safety practices and behaviors which conform to all Valmont safety policies and procedures Clean and grind parts (debur) as needed and cut metals to predetermined sizes and tolerances. Use common shop manufacturing math to include adding, subtracting, multiplying, dividing fractions and conversion of decimals Determine the center of an object using basic measuring skills and shop mathematics Perform operator preventative maintenance on overhead crane, forklift, and welding/ cutting equipment Safely use overhead crane to properly position product for welding or grinding Comply with direction from Shop Supervisor and Lead Person Perform routing machine operations such as feeding or unloading a machine, and assisting worker by holding materials or tools. Pass a 1G v-groove weld test using GMAW and maintain certification Safely operate band saw for cutting raw material product according to drawing Other duties as assigned Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities): Must be able to pass Valmont endorsed 1G flat weld certification test Six months of previous hands-on welding experience in a professional environment Must be proficient at math to include adding, subtracting, multiplying, dividing fractions and conversion of decimals Must be able to accurately read a measuring tape Maintain high awareness for safety at all times Read, write, and/or speak English Must be able to communicate and interact with coworkers in a positive manner The ability to work in a high volume, fast paced environment Must be a person of passion and integrity who has the drive to excel and deliver exceptional results Highly Qualified Candidates Will Also Possess These Qualifications: High School Diploma or GED equivalent Current Valmont endorsed 1G flat weld certification One year of previous experience in a manufacturing or fabrication environment One year of previous hands-on welding experience in a professional environment American Welding Society (AWS) welding certification from a recognized school Working Environment and Physical Efforts: Ambient temperatures in work area coincide with seasonal weather changes. Exposure to metal and smoke fumes due to surrounding processes. Abnormal noise level throughout the shop requiring that hearing protection worn at all times. Direct exposure to dirt, grease, mill scale, cutting fluid, rust inhibitors, and metal particles and splinters. Incumbent will also be exposed to production facilities where specific PPE will be required such as hand, hearing, foot, eye, and head protection. There will also be frequent exposure to outside elements for short periods of time. Being outside will also expose them to material handling equipment such as forklifts, straddle trucks, and shag trucks. Benefits Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: Healthcare (medical, prescription drugs, dental and vision) 401k retirement plan with company match Paid time off Employer paid life insurance Employer paid short-term and long-term disability including maternity leave Work Life Support Tuition Reimbursement up to $5,250 per year Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************.

Job Description About H&G Systems Founded in 1968 as H&G Air Conditioning & Heating, the company expanded to include electrical contracting in 1983 and became H&G Systems to reflect its diversified capabilities. From the start, our foundation has been built on trust, respect, and long-term relationships with clients, suppliers, and team members. We specialize in design-build and design-assist mechanical projects, with roughly two-thirds of our work consisting of complex, negotiated contracts. Our team is known for delivering projects on time, on budget, and with uncompromising quality. What We Offer Pay: Starting at $35.00 an hour and up, depending on experience Take-Home Vehicle: Dispatched directly from home Uniforms Provided Comprehensive Benefits Package: 401(k) with 6% company match Medical coverage: 90% of employee cost and 25% of dependent cost Dental and Vision insurance Paid Time Off (PTO) 8 paid holidays (which include half-days on Christmas Eve and New Year's Eve) Professional Growth: Access to the local ABC training facility / CEF Construction Education Foundation Tuition and book reimbursement for trade school programs (based on attendance and performance) Hands-on leadership development and mentorship We are growing and looking for Experienced Welders / Fitters to join our team! This is a great opportunity for growth and advancement in the welding trade! Primary Job Function: The Experienced Welders / Fitters will effectively and efficiently perform minor to moderately complex work on piping and duct systems in commercial and industrial environments. Required Qualifications: Valid driver's license and insurable driving record Willingness to assist with any additional and reasonable duties assigned by the supervisor Ability to read blueprints and schematics is a plus Adhere to safety policies and procedures Ability to handle physical workload Ability to perform ARC (stick) and MIG welding based on project needs 6G certification Field welding primarily involves pipe, plus a small amount of ductwork Ability to operate lifting equipment and machinery Capable of cutting and fitting pipe Stainless steel welding is a plus!

Cimarron is seeking a senior-level Machinist to support our partnership with Firefly Aerospace at their rocket production facility in Briggs, TX. Through this partnership, Cimarron supplies skilled technical talent in support of Firefly Aerospace's advanced launch and space systems. Firefly designs and builds small- to medium-lift launch vehicles, lunar landers, and orbital vehicles for government and commercial missions from low Earth orbit to the Moon and beyond. Together, our teams leverage advanced carbon composite structures, patented propulsion technologies, and common components across platforms to move fast, improve reliability, and deliver payloads at a lower cost. The selected candidate for this position will need to be able to work 1st and 2nd shift assignments. Key Duties: Machine high-quality parts in accordance with engineering requirements and production standards. Read and follow technical drawings and diagrammed work instructions. Inspect, measure, and document manufactured parts to ensure quality and compliance. Perform machine setups required for part manufacturing. Make program or offset edits as needed to maintain part quality. Follow all safety policies and procedures at all times. Immediately report any safety, quality, or maintenance concerns to management. Maintain clean, organized, and safe work areas. Hold oneself to a high standard of workmanship and take pride in producing quality parts. Requirements Required Skills, Experience, and Education: Due to facility security requirements, only U.S. citizens or permanent residents are eligible for consideration at this time. 6 or more years of experience as a CNC Machinist. Ability to support 1st or 2nd shift assignments. Passion for building spacecraft and rocket components. Ability to perform physically demanding work, including standing, bending, and regularly lifting up to 25 pounds. Positive attitude with a strong sense of reliability and teamwork. Strong written and verbal communication skills. Solid math skills applicable to machining and inspection tasks. Proficient computer skills for documentation and production-related systems. Desired Skills, Experience, and Education: Experience working with Mazak machines. Experience operating or programming 4- and 5-axis CNC machines. Experience with mill/turn machining operations. Experience working with DMG Mori machines. Experience working with Okuma machines. Experience operating vertical turn lathe (VTL) machines. Business Profile: Cimarron is a global solutions company with a strategic partnering approach to satisfying customer-driven requirements. We ensure customer success with a modern approach and experienced leadership. Driven by an entrepreneurial spirit, Cimarron is fueled by highly skilled employees, developing new innovative technologies, and delivering superior products and services. We believe in recognizing employees' worth by offering competitive salaries and benefits, including health, dental, and vision insurance, 401(k) contributions, educational reimbursement, and much more. From company communication through Company-wide information meetings led by our President and CEO, to an Awards program designed to recognize our amazing employees and their accomplishments, you will not only feel like you are a part of a team, you will be a valued member of the Cimarron family. Cimarron is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or any other characteristic protected by federal, state, or local law.

We are looking for a skilled Manual Machinist to operate a variety of machines including a Vertical Turret Lathe (VTL), Vertical Boring Mill (VBM) and Horizontal Boring Mills (HBM). RESPONSBILITES: Identifies the type of material being used and corrects or modifies tooling call-outs, offsets, speeds and feeds to allow for variations in the material. Performs the majority of machining operations needed to complete the part. Reading of blueprints, sketches, machine parts or specifications to determine type and dimensions of stock required. Observe machine operation to detect malfunction or out-of-tolerance machining, and adjust machine controls as required. Maintain a safe work environment and keep work area clean and organized. Conduct all business activities in accordance with company code of conduct, policies and procedures and all applicable legal requirements. Maintain traceability on all parts. All other duties as assigned by your manager *This job description is a summary of the primary job scope and should not be assumed as an all-inclusive description* QUALIFICATIONS: High School Diploma or equivalent. Turbine machining is preferred. 5 years' experience in machining Ability to apply basic written and verbal communication skills. Ability to read and comprehend complex instructions, work orders and drawings. Ability to apply concepts of basic math and basic PC skills. Ability to work in a team environment and effectively communicate. Ability to follow directions and procedures. WORK CONDITIONS: This position is performed in a shop environment. Proficient in the use of hand and power tools at a speed necessary for successful job performance. Frequent standing, walking, sitting, lifting, carrying, pushing, pulling, reaching, handling. Moving, carrying, lifting, objects in excess of 50 lbs. Working extended hours and standing for extended periods of time. Work in both cold and hot climates. Work in or near industrial hazards. Willingness to work a flexible schedule in order to meet demands of the role. ADA JOB REQUIREMENTS: Reasonable accommodations will be made to ensure that the essential functions of the job can be performed and not hinder the employee's performance due to physical, mental, or emotional disability. EQUAL EMPLOYMENT OPPORTUNITY: Allied Power Group is an equal opportunity workplace. All employment decisions are made without regard to sex, race, color, religion, national origin, citizenship, age, disability, marital or veteran status, sexual orientation, gender identity or expression, or any other legally protected categories. This includes providing reasonable accommodation if requested for disabilities or religious beliefs and practices.

Job Description About H&G Systems Founded in 1968 as H&G Air Conditioning & Heating, the company expanded to include electrical contracting in 1983 and became H&G Systems to reflect its diversified capabilities. From the start, our foundation has been built on trust, respect, and long-term relationships with clients, suppliers, and team members. We specialize in design-build and design-assist mechanical projects, with roughly two-thirds of our work consisting of complex, negotiated contracts. Our team is known for delivering projects on time, on budget, and with uncompromising quality. What We Offer Pay: Starting at $35.00 an hour and up, depending on experience Take-Home Vehicle: Dispatched directly from home Uniforms Provided Comprehensive Benefits Package: 401(k) with 6% company match Medical coverage: 90% of employee cost and 25% of dependent cost Dental and Vision insurance Paid Time Off (PTO) 8 paid holidays (which include half-days on Christmas Eve and New Year's Eve) Professional Growth: Access to the local ABC training facility / CEF Construction Education Foundation Tuition and book reimbursement for trade school programs (based on attendance and performance) Hands-on leadership development and mentorship We are growing and looking for Experienced Welders / Fitters to join our team! This is a great opportunity for growth and advancement in the welding trade! Primary Job Function: The Experienced Welders / Fitters will effectively and efficiently perform minor to moderately complex work on piping and duct systems in commercial and industrial environments. Required Qualifications: Valid driver's license and insurable driving record Willingness to assist with any additional and reasonable duties assigned by the supervisor Ability to read blueprints and schematics is a plus Adhere to safety policies and procedures Ability to handle physical workload Ability to perform ARC (stick) and MIG welding based on project needs 6G certification Field welding primarily involves pipe, plus a small amount of ductwork Ability to operate lifting equipment and machinery Capable of cutting and fitting pipe Stainless steel welding is a plus!

Who We Are: FLANDERS is a world leader in renewing machines for heavy industry, specializing in the largest and most intricate applications. Our expertise encompasses distributing, servicing, repairing, designing, and manufacturing electric rotating machines. Additionally, we take pride in offering cutting-edge AI-powered condition-based monitoring, customized controls, seamless systems integration, and advanced automation solutions. What We Are Looking For: Someone to perform basic lathe/milling operations by utilizing medium size machines including manual lathes/mills. Inspect basic/routine parts for defects and wear. What You Will Do: Machinist - Performs under direction. o Perform milling operations such as drilling, tapping, boring, broaching, and conventional milling and lathe work using various engine lathes including but not limited to horizontal and vertical mills and horizontal boring mills. o Use measuring devices and techniques to ensure proper sizings. o Record data to produce expected service and/or design results including sizings and illustrations. o Understand materials and their various applications in order to complete job. o Use various hand-held and stationary power and non-power tools including but not limited to band saws, belt sanders, hand grinders, and files to complete job. o Lift, tighten, adjust and/or secure heavy objects in order to perform work and observe safety precautions. o Observe all safety procedures and use proper safety equipment including eye, ear, and hand protection. o Maintain a clean, neat, and safe work environment at all times. o Operate and maintain equipment in a safe manner at all times. o Promote strong company image and maintain positive working relationships at all times including professional behavior with customers (very infrequent) and co-workers within department (daily basis). o Provide outstanding customer service at all times. o Perform work according to established company policies and procedures. o Perform other duties as requested. What You Will Need: Education: o High school diploma or equivalent. Experience: o One year machinist experience and/or machine trades technical schooling . Basic mechanical knowledge required. Other: o Ability to perform basic math functions including addition, subtraction, multiplication, and division. Knowledge of trigonometry a plus. o Ability to read, write, and comprehend basic written and verbal instructions. o Ability to understand, perform, and retain various job related training, operational, and safety procedures. o Ability to exercise initiative, judgment, and decision making related to routine duties within set company standards. o Ability to operate overhead cranes, fork lift trucks, and other equipment. Values Statement: Cares for people; shows humility; acts with absolute integrity and trustworthiness; never gives up; continually grows; and demonstrates excellence.

Gulf Copper is currently seeking an experienced Plate Fitter to join our team. All applicants must successfully pass all required preemployment screening test. project location Guam project duration 2 months full time job of 70 hours per week certifications and training required: driver's license and or passport meal per diem $72 company will provide housing Essential Duties and Responsibilities: This position is responsible for the following: Other duties may be assigned. Have the ability to comprehend and utilize blueprints, sketches, drawings, technical manuals, and work process instruction. Welds steel plates and pipe in the repair and/or construction of marine vessels, industrial components, and associated equipment. Have the skills to use various types of welding equipment for different types of metal. Welds components in a flat, vertical, or overhead positions. Performs related tasks such as cutting and grinding. Repairs broken or cracked parts, fills holes, and increases size of metal parts. Welds metal parts together using gas welding, brazing, arc welding, wire fed welding, or tig welding process and procedures. Highly skilled welders often are trained to work with a wide variety of materials, such as titanium, aluminum, or exotic metals, in addition to steel. Select and set up welding equipment, execute the planned welds, and examine the welds to ensure that they meet standards or specifications. Required Education & Experience: High School Diploma, some college or technical school certification, six months to one year(s) experience or equivalent combination of education and experience. Working Conditions: Open-air conditions such as noisy, hot, cold, etc. Must be able to stand and operate equipment up to four continuos hours. Must wear hearing, eye, head protection and proper PPE. Some climbing (100 feet or higher) and lifting (50 lbs.) involved. Working with hot and sometimes hazardous materials. Work on inland and offshore barges or in industrial settings. Enter round manholes with inside diameters of 18”, and other internally confined spaces. Traverse gangways and scaffolding at varying heights. An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Equal Employment Opportunity Posters. If you'd like to view a copy of the company's affirmative action plan or policy statement, please email: [email protected]. If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail: [email protected].

Zeeco designs and manufactures industrial combustion and pollution control technologies for the petroleum, chemical, petrochemical and pharmaceutical industries. Zeeco product lines include ultra-low emission burners, gas and liquid flaring systems and hazardous waste incineration. Zeeco's corporate headquarters covers over 230 acres (1 km2) near Tulsa, Oklahoma (USA) in a modern debt-free facility and includes a 66,000 square-foot (6,132 m2) manufacturing facility and one of the industry's largest combustion research and testing facilities. Zeeco subsidiaries reside in Plainville Connecticut, USA, Houston Texas, USA, United Kingdom, South Korea, India, Brazil, China, Mexico, Singapore, Saudi Arabia and Japan. Job Description Job summary: The Fabricator/Welder will be responsible for performing a variety of fabricating and welding activities to support the manufacturing facility. They will be required to understand the Quality Assurance system for materials entry, follow fabrication and welding processes, and produce products compliant with the ISO9001:2008 standard. This hours for this position will be weeknights from 5:30pm - 7:30pm or weekends (hours may vary). Responsibilities: • Interpret engineering drawings • Fabricate parts from drawings • Prepare parts for welding (saw, pillar drill, grinding, pipe bending, pipe threading, weld preparation) • Welding activities to class 2 standards using TIG/MIG/Fluxcore welding on common welded joints, (to include fillet, lap, corner and butt) in accordance with the requirements of BS 4872 Part 1 • Ensure ALL machines are checked on a daily basis completing relevant check sheets Qualifications Education: • GCSE grade A-C Maths, English and Science • Class A Semi-Skilled Fabricator/Welder Skills: • To have had experience in welding X Ray quality work, 98% pass rate expected • Proof of welder approval certifications • Communication skills • Fork Lift Licence desirable Knowledge/ Experience: • Minimum of 4 years fabricating experience • Engineering background • Able to understand and read engineering drawings • Pressure vessel experience desirable. Have worked with 304, 310, 316 and 321 Stainless steels Behaviors: • Good communicator - verbal and written • Good team player • Good time-keeping and attendance record • Well organized and efficient • Confident and Assertive • Ability to use own initiative • Confidence and ability to work unsupervised Additional requirements: • Lives within 1 hour commute to the office, or willing to relocate locally. • Must be able to drive. • Confident working at heights. Additional Information All your information will be kept confidential according to EEO guidelines.

2551 Valmont Dr Brenham Texas 77833-5418 **_Why Valmont_** **We're Here to Move the World Forward.** Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a _Fortune_ 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. _We are the modern workforce_ . Are you ready to move the world forward? Apply now. **A Brief Summary of This Position** The Fitter Welder 7 position is an individual contributor. This person must be a highly driven individual that will fit and weld metal and/or aluminum components together to fabricate or repair products according to layouts, blueprints, or work orders using a variety of welding equipment and/or processes. **Shift: 2nd shift (Evenings) Monday-Friday 3PM-11PM** **Starting Hourly Pay Rate (LG7): $24.41 + $1.00 for shift differential** **Opportunity for step pay increases at 90 days, 1 year & 2 years** **Essential Functions** **Fitter:** + Follow fit and layout instructions described in detail drawings + Ability to tack weld material into place + Use motorized grinders, motorized buffers, stone grinders, and drills to clean and prep material for fitting and tacking + Use overhead cranes or jib cranes to move and hold material in place + Assemble products of the unit by tack welding various small parts to pole shafts using the GMAW, FCAW, and SAW welding process. + Work with steel pipe and other steel shapes and measure on radiused surfaces + Works in confined areas at various locations of the pole assembly line as necessary to accurately measure and assemble components described above. Moves under, around, and over poles as necessary, to get into proper position to assemble pole assembly **Welder:** + Maintain and operate production tooling and fixtures as well as all welding equipment in a safe and secure manner + Ability to produce high quality welds by means of GMAW arc welding in the fabrication of communication towers, components, and overhead sign structures with low non-conformity rate + Perform welding operations requiring a limited amount of planning of work from blueprints or other written specifications and determine operation sequence while consistently meeting production goals **Additional Essential Functions:** + Utilize all safety devices and wear all mandatory personal protective safety equipment + Read and complete labor reporting system, standard shop forms and blueprints + Follow written procedures and specifications + Must meet code requirements including ultrasonic testing + Make management aware of any training needs you have. Consult your management immediately if you are being asked to perform work for which you are not trained and/or are not comfortable doing because of potential safety or risk implications. + Responsible and accountable for maintaining a clean and organized workplace while implementing LEAN practices + Perform other duties as required and/or assigned **Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills, and Abilities)** + Graduation from an acceptable Technical Training Program focused on welding + Ability to read weld symbols and understand blueprints + The ability to calculate simple mathematics and interpret shop drawings + Ability to operate overhead cranes, prior experience preferred + Must be able to use and accurately read a tape measure + Able to lift up to 50 pounds + Multi-pass, stack layering welding experience + Must be able to use GMAW welding equipment for tack welds. + Must be able to pass FCAW, GMAW, and SAW weld test and maintain certification **Highly Qualified Candidates Will Also Possess These Qualifications** + Must have a high awareness for safety at all times + Previous experience with fitting/welding in a manufacturing environment + High School Diploma or GED equivalent + AWS certified welder operator qualification + The ability to accurately and honestly check one's own work for quality assurance **Working Conditions & Physical Efforts:** The job is performed in an indoor shop environment. The temperature range can be from 100+ degrees in the summer to about 40 degrees in the winter. Most operations may expose employee to some type of disagreeable working conditions (wind, cold, heat, dust, dirt, fumes, noise, vibration, water, and/or oil). Working conditions may vary with specific work assignments. Exposure to electrical hazards, grease, loud noises, and outside elements occur continually or regularly. Extreme care should be taken to prevent damage to equipment or department personnel in the area of operations especially when performing setups. The job requires safety glasses, hearing protection, and metatarsal safety shoes be worn at all times. The employee must be able to spend the entire work shift on their feet within the shop environment. The incumbent must also be able to wear the required personal protective equipment (PPE) for working in the production facility. + Exposure to additional heat during fitting/welding process above ambient temperature and direct exposure to weld fumes + Exposure to noise while grinding and hammering requires hearing protection to be worn at all times + Sparks from grinding and welding require proper PPE + Possible burns from hot steel during welding processes, eye injuries from grinding, welding, and cutting sparks, flash burns from welding and heat fatigue + Potential for hearing loss if proper PPE is not used **Hazards:** This job requires handling metal objects, some of which have sharp edges. Extreme care and awareness should be taken for all production jobs. Below are some common hazards that exist for this particular position. Set up and run of equipment provides the potential for injury through slips, falls, strains, pinch points, tripping hazards, shot blasting equipment, high pressure air nozzles, material handling equipment. **Benefits** Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: + Healthcare (medical, prescription drugs, dental and vision) + 401k retirement plan with company match + Paid time off + Employer paid life insurance + Employer paid short-term and long-term disability including maternity leave + Work Life Support + Tuition Reimbursement up to $5,250 per year + Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************. Valmont is here to modernize vital infrastructure and increase agricultural productivity, sustainably and reliably. We galvanize steel to last a century with minimal environmental impact. We modernize irrigation to feed a growing population by utilizing the latest technology. We harden the electrical grid to enable the delivery of reliable power to millions of homes around the world. And we help make communities everywhere safer, cleaner and more connected through our smart infrastructure technology. Valmont serves two primary markets - agriculture and infrastructure - and seven diverse product lines: Utility, Lighting and Transportation, Telecom, Solar, Coatings, Irrigation and Ag Tech. We manufacture products in 85 facilities spread across six continents, and we do business in 100 different countries. That's what Valmont does. We conserve resources and improve life, finding ways to make innovation and technology beneficial in the real world. + That's the value we add.

2551 Valmont Dr Brenham Texas 77833-5418 Why Valmont We're Here to Move the World Forward. Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a Fortune 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. We are the modern workforce . Are you ready to move the world forward? Apply now. A Brief Summary of This Position: While working under the direct supervision of the Production Supervisor/Leadperson in the Small Pole Department the Fitter assembles products of the unit by tack welding various small parts to pole shafts using the FCAW welding process. This is done within prescribed codes, and according to prescribed procedures, specifications, and drawings. Shift: 1st shift (Days) Monday-Friday 7AM-3PM Starting Hourly Pay Rate (LG8): $25.19 + $1.00 for shift differential Opportunity for step pay increases at 90 days, 1 year & 2 years Essential Functions: Uses GMAW process to tack weld various small components to round or square shafts to make a pole assembly and SAW process for structural welds. The pole assembly generally consists of a square or round shaft, base plate, hand hole, arm mounting simplex, tenon-top, and/or other small parts Manually position shaft on stationary turner to position shaft for assembly. Uses jib crane for lifting various components, such as base plate and arm mounting simplex, into position for assembly. Frequently pushes, lifts, and pulls up to 50 pounds Reads and interprets drawings to determine parts needed to assemble pole assembly. Locate and gather parts needed for assembly, from parts staging area that is staged by the Storeroom personnel Read and interpret drawings to ensure proper location of various small part attachments Uses plasma torch to cut steel. Utilizes jigs made at Valmont for cutting holes in shafts for inserting hand hole rims, arm mounting simplex's, couplings, and other small parts. Wears protective goggles or hood to protect eyes from harmful rays Uses measuring tape, levels, squares, and angle finders to measure distances and angles. Adds, subtracts, multiplies, and divides feet, inches, fractions, and decimals. Uses table to convert fractions to decimals, and decimals to fractions Works in confined areas at various locations of the pole assembly line as necessary to accurately measure and assemble components described above. Moves under, around, and over poles as necessary, to get into proper position to assemble pole assembly Uses motorized grinders, motorized buffers, stone grinders, and drills to help assemble product Maintain appropriate professional competencies, certifications, licenses, etc., necessary to perform job. Make management aware of any training needs you have. Consult your management immediately if you are being asked to perform work for which you are not trained and/or are not comfortable doing because of potential safety or risk implications. Other duties as assigned and/or directed Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities): Must be able to read and write English Ability to use common manufacturing math 1 year experience reading and using blue prints 1 year previous experience working in a manufacturing or fabrication environment, and/or have graduated from an acceptable Technical Training Program focused in welding Must pass FCAW weld test and maintain certification Highly Qualified Candidates Will Also Possess These Qualifications: High School Diploma or GED 2 years previous experience working in an assembly environment 2 years previous experience working in a manufacturing or fabrication environment 2 years previous experience operating hand and/or power tools The ability to accurately and honestly check one's own work for quality assurance Must be a person of passion and integrity who has the drive to excel and deliver exceptional results Working Environment and Physical Efforts: Physical efforts include standing - 80%, bending over - 15%, average weight handled - 25 lbs., operator grinds 10% and uses buffer 10% of time. Exposure to additional heat during fitting/welding process above ambient temperature and direct exposure to weld fumes Exposure to noise while grinding and hammering requires hearing protection to be worn at all times Ambient air conditions; both hot in the summer and cold in the winter Sparks from grinding and welding require proper PPE Possible burns from hot steel during welding processes, eye injuries from grinding, welding, and cutting sparks, flash burns from welding and heat fatigue Potential for hearing loss if proper PPE not used Benefits Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: Healthcare (medical, prescription drugs, dental and vision) 401k retirement plan with company match Paid time off Employer paid life insurance Employer paid short-term and long-term disability including maternity leave Work Life Support Tuition Reimbursement up to $5,250 per year Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************.

2551 Valmont Dr Brenham Texas 77833-5418 Why Valmont We're Here to Move the World Forward. Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a Fortune 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. We are the modern workforce . Are you ready to move the world forward? Apply now. A Brief Summary of This Position The Fitter Welder 7 position is an individual contributor. This person must be a highly driven individual that will fit and weld metal and/or aluminum components together to fabricate or repair products according to layouts, blueprints, or work orders using a variety of welding equipment and/or processes. Shift: 2nd shift (Evenings) Monday-Friday 3PM-11PM Starting Hourly Pay Rate (LG7): $24.41 + $1.00 for shift differential Opportunity for step pay increases at 90 days, 1 year & 2 years Essential Functions Fitter: Follow fit and layout instructions described in detail drawings Ability to tack weld material into place Use motorized grinders, motorized buffers, stone grinders, and drills to clean and prep material for fitting and tacking Use overhead cranes or jib cranes to move and hold material in place Assemble products of the unit by tack welding various small parts to pole shafts using the GMAW, FCAW, and SAW welding process. Work with steel pipe and other steel shapes and measure on radiused surfaces Works in confined areas at various locations of the pole assembly line as necessary to accurately measure and assemble components described above. Moves under, around, and over poles as necessary, to get into proper position to assemble pole assembly Welder: Maintain and operate production tooling and fixtures as well as all welding equipment in a safe and secure manner Ability to produce high quality welds by means of GMAW arc welding in the fabrication of communication towers, components, and overhead sign structures with low non-conformity rate Perform welding operations requiring a limited amount of planning of work from blueprints or other written specifications and determine operation sequence while consistently meeting production goals Additional Essential Functions: Utilize all safety devices and wear all mandatory personal protective safety equipment Read and complete labor reporting system, standard shop forms and blueprints Follow written procedures and specifications Must meet code requirements including ultrasonic testing Make management aware of any training needs you have. Consult your management immediately if you are being asked to perform work for which you are not trained and/or are not comfortable doing because of potential safety or risk implications. Responsible and accountable for maintaining a clean and organized workplace while implementing LEAN practices Perform other duties as required and/or assigned Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills, and Abilities) Graduation from an acceptable Technical Training Program focused on welding Ability to read weld symbols and understand blueprints The ability to calculate simple mathematics and interpret shop drawings Ability to operate overhead cranes, prior experience preferred Must be able to use and accurately read a tape measure Able to lift up to 50 pounds Multi-pass, stack layering welding experience Must be able to use GMAW welding equipment for tack welds. Must be able to pass FCAW, GMAW, and SAW weld test and maintain certification Highly Qualified Candidates Will Also Possess These Qualifications Must have a high awareness for safety at all times Previous experience with fitting/welding in a manufacturing environment High School Diploma or GED equivalent AWS certified welder operator qualification The ability to accurately and honestly check one's own work for quality assurance Working Conditions & Physical Efforts: The job is performed in an indoor shop environment. The temperature range can be from 100+ degrees in the summer to about 40 degrees in the winter. Most operations may expose employee to some type of disagreeable working conditions (wind, cold, heat, dust, dirt, fumes, noise, vibration, water, and/or oil). Working conditions may vary with specific work assignments. Exposure to electrical hazards, grease, loud noises, and outside elements occur continually or regularly. Extreme care should be taken to prevent damage to equipment or department personnel in the area of operations especially when performing setups. The job requires safety glasses, hearing protection, and metatarsal safety shoes be worn at all times. The employee must be able to spend the entire work shift on their feet within the shop environment. The incumbent must also be able to wear the required personal protective equipment (PPE) for working in the production facility. Exposure to additional heat during fitting/welding process above ambient temperature and direct exposure to weld fumes Exposure to noise while grinding and hammering requires hearing protection to be worn at all times Sparks from grinding and welding require proper PPE Possible burns from hot steel during welding processes, eye injuries from grinding, welding, and cutting sparks, flash burns from welding and heat fatigue Potential for hearing loss if proper PPE is not used Hazards: This job requires handling metal objects, some of which have sharp edges. Extreme care and awareness should be taken for all production jobs. Below are some common hazards that exist for this particular position. Set up and run of equipment provides the potential for injury through slips, falls, strains, pinch points, tripping hazards, shot blasting equipment, high pressure air nozzles, material handling equipment. Benefits Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: Healthcare (medical, prescription drugs, dental and vision) 401k retirement plan with company match Paid time off Employer paid life insurance Employer paid short-term and long-term disability including maternity leave Work Life Support Tuition Reimbursement up to $5,250 per year Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************.

Job Description YOUR DAY TO DAY: To set-up, maintain, and perform a limited number of welding processes working with prints, specification sheets, and verbal instructions on generally routine production items under minimal supervision. Machine and Equipment Used: Hand tools, electric and gas welding equipment. YOU WILL BE ACCOUNTABLE FOR: Welds aluminum metal components together with brazing and a variety of arc and gas welding equipment to fabricate or repair products such as machine parts, and plant equipment Performs welding processes on aluminum parts and assemblies to required tolerances using welding metals and metal alloys Performs welding processes on aluminum parts and assemblies to required tolerances using welding metals and metal alloys Must be able to pass aluminum welding certification tests Performs related tasks such as thermal cutting and grinding Repairs broken or cracked parts, fills holes, and increases size of metal parts Locates and repairs cracks in products and equipment Maintains clean work area Operates lathes, drill presses, mills, routers, grinning machines, duplicating, and profile machines, brakes and shears Determines layouts and welds parts and assemblies according to engineering drawings and specifications May monitor and verify quality in accordance with statistical process or other control procedures Trains less experienced employees to build quality products within the time standard Participates in continuous improvement meetings, and shares knowledge for improvement actions Under minimal supervision, interprets drawings, sketches, and/or preliminary designs, and produces weldments from that interpretation Interacts with employees and managers across the company May need to operate a vehicle or forklift Work done with minimal supervision Work may be done without established procedures Performs other duties as needed and assigned. YOU ARE THE RIGHT PERSON FOR THIS JOB IF YOU HAVE: Must know shop mathematics through geometry Ability to read and interpret complex prints Good eye/hand coordination Basic computer skills Must have the ability to follow written and verbal instructions Must have the ability to follow safety practices Basic problem-solving skills Ability to learn how to use necessary computer tools Visual attention to detail Reliable hand strength and manual dexterity Three (3) years directly related work experience or two (2) years of concentrated welding training. High school Diploma or GED required, AA in welding. Able to lift to a maximum of 25-40 lbs. Able to sit/stand for long periods of time. Must be a U.S. Citizen Salary Range: $22.00 - $26.00 / hour SHAPING THE FUTURE THROUGH INNOVATION AND DISCOVERY! With a history spanning more than seven decades, Communications & Power Industries' thousands of products have impacted people's lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, assist in diagnosing medical conditions, empower scientific discoveries and space exploration, and much more. CPI is headquartered in Plano, Texas and is a global manufacturer of electronic components and subsystems. We have manufacturing locations in the United States, Canada, Europe, and Asia. With a heritage of technological excellence, our team serves customers in the communications, defense, medical, industrial, and scientific markets. WHAT WE OFFER: Whether you are a seasoned professional or just embarking on your career, CPI is an ideal place to expand your knowledge and expertise. We cultivate a healthy, dynamic, and team-oriented environment that empowers our employees to develop, create and deliver innovative, reliable technology solutions to power, connect, protect, and support a better tomorrow. We offer our employees an attractive compensation package with competitive salaries and comprehensive benefits, including health and wellness programs, career development, generous retirement savings plan with company match and more! WHO WE ARE: We value the unique and diverse skills, qualities, and backgrounds that each employee brings to CPI, and we respect each employee as an integral member of our growing team. CPI is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us. CPI is proud to be an Equal Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics.

YOUR DAY TO DAY: To set-up, maintain, and perform a limited number of welding processes working with prints, specification sheets, and verbal instructions on generally routine production items under minimal supervision. Machine and Equipment Used: Hand tools, electric and gas welding equipment. YOU WILL BE ACCOUNTABLE FOR: Welds aluminum metal components together with brazing and a variety of arc and gas welding equipment to fabricate or repair products such as machine parts, and plant equipment Performs welding processes on aluminum parts and assemblies to required tolerances using welding metals and metal alloys Performs welding processes on aluminum parts and assemblies to required tolerances using welding metals and metal alloys Must be able to pass aluminum welding certification tests Performs related tasks such as thermal cutting and grinding Repairs broken or cracked parts, fills holes, and increases size of metal parts Locates and repairs cracks in products and equipment Maintains clean work area Operates lathes, drill presses, mills, routers, grinning machines, duplicating, and profile machines, brakes and shears Determines layouts and welds parts and assemblies according to engineering drawings and specifications May monitor and verify quality in accordance with statistical process or other control procedures Trains less experienced employees to build quality products within the time standard Participates in continuous improvement meetings, and shares knowledge for improvement actions Under minimal supervision, interprets drawings, sketches, and/or preliminary designs, and produces weldments from that interpretation Interacts with employees and managers across the company May need to operate a vehicle or forklift Work done with minimal supervision Work may be done without established procedures Performs other duties as needed and assigned. YOU ARE THE RIGHT PERSON FOR THIS JOB IF YOU HAVE: Must know shop mathematics through geometry Ability to read and interpret complex prints Good eye/hand coordination Basic computer skills Must have the ability to follow written and verbal instructions Must have the ability to follow safety practices Basic problem-solving skills Ability to learn how to use necessary computer tools Visual attention to detail Reliable hand strength and manual dexterity Three (3) years directly related work experience or two (2) years of concentrated welding training. High school Diploma or GED required, AA in welding. Able to lift to a maximum of 25-40 lbs. Able to sit/stand for long periods of time. Must be a U.S. Citizen Salary Range: $22.00 - $26.00 / hour SHAPING THE FUTURE THROUGH INNOVATION AND DISCOVERY! With a history spanning more than seven decades, Communications & Power Industries' thousands of products have impacted people's lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, assist in diagnosing medical conditions, empower scientific discoveries and space exploration, and much more. CPI is headquartered in Plano, Texas and is a global manufacturer of electronic components and subsystems. We have manufacturing locations in the United States, Canada, Europe, and Asia. With a heritage of technological excellence, our team serves customers in the communications, defense, medical, industrial, and scientific markets. WHAT WE OFFER: Whether you are a seasoned professional or just embarking on your career, CPI is an ideal place to expand your knowledge and expertise. We cultivate a healthy, dynamic, and team-oriented environment that empowers our employees to develop, create and deliver innovative, reliable technology solutions to power, connect, protect, and support a better tomorrow. We offer our employees an attractive compensation package with competitive salaries and comprehensive benefits, including health and wellness programs, career development, generous retirement savings plan with company match and more! WHO WE ARE: We value the unique and diverse skills, qualities, and backgrounds that each employee brings to CPI, and we respect each employee as an integral member of our growing team. CPI is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us. CPI is proud to be an Equal Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics.

The MIG Welder I will join, fabricate, and repair steel parts by using specialized gas metal arc welding techniques and equipment. Duties and Responsibilities * Joins, fabricates, and repairs metal and other weldable material by applying appropriate welding techniques. * Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process. * Inspects completed welds to determine structural soundness. * Familiar with and complies with all safety requirements and protocols. * May prepare the materials and set up for a welding device or robot. * May be required to complete an apprenticeship and/or formal training in area of specialty. * Support the safety and quality programs by following all accompanying rules and established processes. * Other duties as assigned. Skills and Qualifications * Ability to operate forklift and cranes. * Ability to read and interpret simple blueprints. * Ability to use a variety of hand tools such as hammer, pliers, screwdriver, wrench, drill, grinder and bander. * Ability to use measuring tools such as tape measure, box caliper, slide dial caliper and micrometer. * Ability to convert fractions to decimals and vice versa. * Ability to convert metric to English. * Provide high quality work to all internal and external customers as related to the output of their position. * Capable of setting up and operating one or more processing machines. * Strong attention to detail. * High School Diploma or equivalent (preferred). * Must pass a MIG welder certification. * Relevant apprenticeship, experience, or vocational training, preferred. Physical Requirements Subject to environmental conditions that occur indoors and outdoors which includes but is not limited to exposure to changing temperatures, loud noises and vibration from use of equipment and the following: * Hazards: Variety of physical conditions, such as proximity to moving mechanical parts, electrical current, exposure to high heat or exposure to chemicals. * Atmospheric conditions: One or more of the following conditions that affect the respiratory system or the skin- fumes, odors, dusts, mists, gases or poor ventilation. * Oils: There is air and/or skin exposure to oils and other cutting fluids. Benefits * Medical, Dental and Vision Insurance * 401k with Company Match * Paid Time Off * Paid Holidays * Paid Community Service Day * Company Paid Life Insurance * Company Paid Short-Term Disability * Company Paid Long-Term Disability * Tuition Reimbursement * Wellness Programs * Employee Assistance Program About Us At O'Neal Manufacturing Services (OMS), we build things! As an O'Neal Industries affiliate company, we are a leader in the fabrication of steel and metal products that shape the world in which we live in. Our culture is driven by honesty, integrity and respect. We set high expectations for ourselves in providing a safe and diverse work environment. If you are looking to be part of a dynamic company to build your career, visit onealmfg.com/careers to learn more! OMS Louisville supplies parts for trains, construction equipment, forklifts, and more! Located near the Airport Industrial Park, OMS Louisville is home to employees with a wide variety of skills and tenure, with some exceeding four decades. OMS Louisville possesses a variety of equipment, including: lasers, machining centers, oxy and plasma burners, manual and robotic welding equipment, saws and presses, aluminum processing, and much more.

Structural Welders are required to be safety minded, highly productive individuals who can cut, fit, tack weld, finish weld, and read blueprints for all structural steel parts and sub-assemblies. Qualifications Must be a highly safety-oriented individual Minimum of 3 years' experience in shop fabrication and welding structural steel parts and sub-assemblies Extensive knowledge of welding with GMAW & FCAW thermal processes in the manufacturing of various types of structure Ability to pass a weld qualification for each process Ability to read and understand drawings, prints and dimensions Ability to individually fit, tack, weld and assemble all structural parts per given prints Ability to weld within the parameters of a WPS/PQR Ability to be a self-motivated and highly productive employee who requires minimal supervision and who can efficiently execute a plan to make jobs happen on time within the estimated hours given Ability to be a team player who can work well with others to achieve company goals Ability to recognize and rectify sub-standard welds to ensure product quality Ability to be punctual and dependent with a willingness to work hours outside of a standard schedule when required to achieve a task or complete a project Must be willing to step outside of welding role when a company need arises and perform basic tasks such as assembly, grinding, sanding, and shop clean up Ability to be a team player and be a company-oriented individual who takes pride in their work