Field Service Technician jobs at Hunter - 276 jobs

BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD! As North America's largest roofing maintenance service provider, we're obsessed with making good roofs, and good buildings, better. Restoring instead of replacing wherever we can is the right thing for our customers and our planet, and it's a big part of what makes Tremco Roofing and WTI so unique. If you're looking for a place to build a career and a life, with great benefits, advancement opportunity, technology, people and a commitment to a sustainable future, you've found it with us. Tremco is currently looking for a Field Services Safety Engineer. General Purpose: The Field Safety Engineer will be responsible for providing support and safety oversight to regional Roofing and Weatherproofing Technologies field employees (including but not limited to Sales, Roofing Advisors, CSS, Field Resource Representatives, and leadership), ensuring site compliance with corporate and client safety standards, as well as ensuring site safety policies and procedures are aligned with governmental regulations. This position will provide supervision and coordination of the day-to-day safety requirements of jobsites. Responsibilities and Duties: Provide support to projects by maintaining a visible presence and conducting site visits to perform safety audits and safety process audits (e.g., safety document evaluation/compliance) *this should take place at least 80% of the week* Enforce all Federal, State, local, owner and Tremco regulations throughout all Roofing regional projects. Assist site leadership to develop site-specific safety programs aligned with Tremco Field Services Safety policies and instruct supervisors on safety procedures, planning and equipment. Assist Regional Field Safety Managers with rolling out new safety initiatives and briefing employees as needed on new policies, or changes in existing policies, to keep current (e.g., Daily Task Planning, 100% audit compliance, safety training programs) Educate the workforce and regional leadership on understanding Tremco's safety cultural advancements, such as safety leadership and safety management systems. Assist in the coaching, mentoring and implementation of Tremco Health and Safety programs in the field, to ensure that all safety expectations are understood and met. Participate with and/or conduct Toolbox Talk Meetings with Regional team employees. Regularly review and be familiar with all applicable legislation and applicable standards, to ensure compliance. Effectively represent our Tremco safety culture with our subcontractors and help Tremco site leadership to ensure complete compliance of our subcontractors to applicable rules and regulations (Federal, State, local, owner, Tremco and their own). Motivating, organizing, and encouraging teamwork within the workforce to ensure safety practices and policies are being adhered to effectively. As a direct report to, regularly communicate safety audit results and/or field safety concerns (e.g., Stop Work Authority) with Assistant Safety Director and prepare observation reports as needed. Regularly audit the Site-Specific Safety and Health Plans for compliance and update to ensure the alignment with project scope and conditions. Ensure that all incidents are reported immediately per the Tremco Incident Notification Policy. Participate and assist all field leadership in the investigation of incidents to determine root cause, and corrective actions where necessary. Ensure incident corrective actions are followed up on and completed. Monitor and follow up on modified workers in the field. Must adhere to all company policies and procedures. Perform other duties as necessary. Qualifications: Bachelor's Degree (Occupational Health & Safety preferred) or 5+ Years of Construction experience with high school diploma. Minimum of two years of construction safety field experience required. OSHA 10- and 30-hour certification required. Knowledge of the 1926 OSHA Regulations. Working Knowledge on how to develop, implement, and audit a Daily Task Analysis for Employees and Subcontractors. Proficient written and oral communication skills. Proficient Computer Skills- Microsoft Word, Excel, and PowerPoint. Willingness to travel/work remotely 80% or greater. You will be home every weekend. Skills /Knowledge/Competencies: Must have excellent skill and/or abilities in the following areas: Conflict resolution and problem-solving Verbal and written communications Interpersonal skills with all levels of staff Situation analysis Decision-making Organized approach to work including excellent follow up on issues Multitasking in fast paced environment with good prioritization skills The salary range for applicants in this position generally ranges between $70,000 and $80,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Compensation and Benefits: Base Salary Full health benefits, RRSP, pension plan Great support for training and guidance Opportunity for advancement Relevant business expenses paid Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.

Supports management in directing and coordinating activities of Central Services functions at Universal Kids Resort (UKR). Provides work direction and leads the daily tasks of Team Member work to support the operation, maintenance, welding, mechanical, creative fabrication, painting, fiberglass, hydraulics, and figure finish activities. Leads the team by overseeing shifts, opening and closing procedures, and completing administrative duties in support of Central Services Management and compliance requirements. Upholds and reinforces Universal policies and procedures, escalating concerns to management as necessary and ensures Team Member safety. JOB RESPONSIBILITIES: + Plans and delegates work tasks within Central Services functions. Supports, follows, and implements planning and scheduling for assigned work. Delegates work assignments among qualified Team Members. Communicates performance expectations to ensure proper completion of tasks; provides feedback for recognition and performance improvement. Maintains the Central Services tool crib, equipment, and broken parts incoming and outgoing, ensuring lead times are maintained and all issues are resolved. + Actively reinforces company safety guidelines and programs, reports or correct non-compliance. Monitors Team Member productivity and work habits. Leads the startup and stoppage of work and schedules breaks. Oversees critical spare parts and materials inventory processes and establishes and maintains accurate min/max counts. Monitors compliance with department standards, chemical use in partnership with EHS, driving policy, radio usage, and other Universal policies. + Ensures proper completion of work orders, documentation, and procedures, ensuring accurate data entry and standardization daily within Maximo used in modifications and repairs. Ensures proper safety equipment, tools, and procedures are available for all work performed. Captures written behaviors using the Lead Observation-Report to support Ride & Show Management documentation and adherence to state requirements. + Assists with training new and current Team Members and coordinating daily training needs. Provides training updates and follows up as necessary to ensure the completion of all proper documentation and adherence to Universal standards and procedures. Communicates resource needs and work plans to leadership for proper maintenance scheduling and support. + Performs Technician job duties as necessary to ensure labor coverage. Maintains and shares job knowledge, assists in developing Team Members. Demonstrates adaptability and the ability to acquire skills in additional disciplines that benefit from their technical expertise, supporting a broader range of operational and project needs. + Communicates and coordinates across Technical Services and other departments as needed to ensure smooth operation and Guest safety. Assists with seasonal weather condition sustainment initiatives as directed. Actively promotes, engages in, and maintains positive working relationships with other departments and shifts in supporting department activities. + Understand and actively participate in Environmental, Health & Safety responsibilities by following established UDX policy, procedures, training, and team member involvement activities. + Perform other duties as assigned. SUPERVISORY RESPONSIBILITY: + Individual Contributor ADDITIONAL INFORMATION: + Must be able to work a flexible and varying schedule based on business needs. + Training is required and will be provided prior to performing the inspections. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities (KSAs) required. + Strong communication skills and ability to work in a team environment. + Previous mechanic, maintenance, or attractions technical experience is preferred. + Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. + Consistent attendance is a job requirement. EDUCATION: + Associate's or Technical degree in related field is preferred. EXPERIENCE: + 3+ years of experience in general shop work and experience with tools and small equipment is required; 6+ months of experience with providing work direction is required, or equivalent combination of education and experience. Your talent, skills and experience will be rewarded with a competitive compensation package. Universal is not accepting unsolicited assistance from search firms for this employment opportunity. All resumes submitted by search firms to any employee at Universal Kids Resort via-email, the Internet or in any form and/or method without a valid written Statement of Work in place for this position from Universal Kids Resort HR/Recruitment will be deemed the sole property of Universal Kids Resort. No fee will be paid in the event the candidate is hired by Universal Kids Resort as a result of the referral or through other means. Universal Kids Resort. Here you can. Universal Kids Resort is an equal opportunity employer. Universal elements and all related indicia TM & © 2025 Universal Studios. All rights reserved. EOE.

Field Technician Salary: $18.50$24.50 No Experience Required Sign-On Bonus: $250 Join Our Team! Ready to build a career with meaningful growth, strong support, and great pay? Do you have the desire to work hard and build a stable career at an Employee-Owned company? Tired of not being able to pay your bills on time and differentiate yourselves from team members that dont perform like you do? If so, now is the time to join the Satellites Unlimited (SUI) family as a Field Technician! This entry-level satellite TV and broadband installer role is ideal for individuals with mechanical aptitude and good communication & customer service skills. * Quick Apply: Takes less than 10 minutes on our website * Watch what its like to be part of the team:

We are seeking highly-motivated and experienced Sense and Warn Field Service Representative (FSR) for our Sense and Warn program to work OCONUS. Responsibilities include, but are not limited to: - The Sense and Warn (S&W) Radar Field Service Representative (FSR) will inspect, maintain, service and repair all ground/air-based radar systems. - The FSR is responsible for conducting emergency maintenance and repairs as required. - Documents all inspections, repairs and services. - Monitors consumption of materials ensuring adequate inventory is maintained to support all radar operations. Four (4) years of relevant experience or combined education maintaining and repairing air based and ground-based radar systems, or similar systems. Knowledge and experience executing maintenance, service, troubleshooting and repair of radar systems. Position requires self-motivation and the ability to work effectively under minimal supervision. Must demonstrate the ability to interact with all levels of an organization in a professional, diplomatic, and tactful manner. Must demonstrate a good attitude and ability to work as a member of a cohesive team. Must be able to multitask efficiently, work in a fast-paced environment on multiple projects, and have strong attention to detail. Must possess excellent writing and verbal skills. Must be proficient with Microsoft Windows operating systems and office automation software (e.g. Microsoft Office, SharePoint). Secret Security Clearance Required. We offer an excellent benefits package including PTO and paid Holidays. Eligible for health care for full-time work the first of the month after your start date. 401(k) plan with employer match available. NASC is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law.

Title: Field Service Engineer, Northeast Responsible Manager: SCCT Service Manager, Northeast Note: This position is for an On-site Field Service Engineer. However, if the assignment should end, the position would then revert to a Field Service Engineer role where travel is required. We are looking for an experienced, energetic and motivated On-site Service Engineer to join our team. As a On-site Service Engineer, you will be responsible for providing service and support for local customers' equipment. You will manage all on-site installation, repair, maintenance, diagnosing technical problems, and determining proper solutions in order to achieve outstanding customer satisfaction. Your Mission •Installation of equipment at customer's facility to ensure full functionality according to EOS specifications. •Provide on-site technical/remote assistance to help troubleshoot and repair equipment. •Perform preventative maintenance procedures for customer's equipment within thescheduled time. •Timely, accurate submission of all service documentation according to EOS proceduresand guidelines. •Cooperate in projects such as training, documentation, and exhibition installations. •Work closely with 2nd Level Support to ensure local installation base is maintained tocompany standards. •Communicate and maintain service records and service reports. •Manage EOS service tools and spare parts inventory to ensure accurate inventory ofcompany assigned assets. Your Talents •Minimum 2-3 years of experience in servicing industrial equipment. •Certified technician or skilled worker in electrical engineering technology. •Experience in additive manufacturing data preparation using MAGICS and/or SolidWorks. •Thorough product knowledge on industrial lasers and axis motion systems. •Skilled in using written, oral, schematic and diagram engineering instructions. •Possess computer knowledge (PC-configuration, MS-Windows, Network knowledge, MS- Office). •Availability to work irregular shifts, including evenings and weekends. •Ability to work independently as well as within a team. •Professional appearance and conduct, with good communication skills. • Willingness to travel, including international travel. • Valid driver's license and passport. Our Vision Over 1000 sharp minds, about 60 nationalities, one goal: accelerating the world's transition to Responsible Manufacturing. Our proven technology, industrial 3D printing, has been extending the boundaries of manufacturing for over 30 years. We work globally networked and prefer to think outside the box - and we're looking for people who want to shape the future with us. EOS welcomes individuals from all backgrounds, ensuring equal opportunities without regard to race, color, religion, national origin, gender identity, expression, sexual orientation, age, or disability. At EOS, equity and inclusion are fundamental principles, and we believe in creating a work environment that is built on empathy, respect, and fairness. We are ALL IN Our Vision: Over 1000 sharp minds, about 60 nationalities, one goal: accelerating the world's transition to Responsible Manufacturing. Our proven technology, industrial 3D printing, has been extending the boundaries of manufacturing for over 30 years. We work globally networked and prefer to think outside the box - and we're looking for people who want to shape the future with us. EOS welcomes individuals from all backgrounds, ensuring equal opportunities without regard to race, color, religion, national origin, gender identity, expression, sexual orientation, age, or disability. At EOS, equity and inclusion are fundamental principles, and we believe in creating a work environment that is built on empathy, respect, and fairness. We are ALL IN.

Title: Field Service Engineer Responsible Manager: Service Manager Polymers We are looking for an experienced, energic and motivated Field Service Engineer to join our team. As a Field Service Engineer, you will be responsible for providing service and support during field visits for customer's equipment. You will manage all on-site installation, repair, maintenance, diagnosing technical problems and determining proper solutions in order to achieve outstanding customer satisfaction. Your Mission • Installation of equipment at customer's facility to ensure full functionality according to EOS specifications. • Provide on-site technical/remote assistance to help troubleshoot and repair equipment. • Perform preventive maintenance procedures for customer's equipment within the scheduled time. • Timely, accurate submission of all service documentation according to EOS procedures and guidelines. • Cooperate in projects such as training, documentation, and exhibition installations. • Work closely with 2nd Level Support to ensure local install base is maintained to company standards. • Communicate and maintain service records and field service reports. • Manage EOS service tools and spare parts inventory to ensure accurate inventory of assigned company assets. Your Talents • Minimum 2-3 years of experience in servicing industrial equipment. • Certified technician or skilled worker in electrical engineering technology. • Experience in additive manufacturing data preparation. • Thorough product knowledge on industrial lasers and axis motion systems. • Skilled in using written, oral, schematic and diagram engineering instructions. • Possess computer knowledge (PC-configuration, MS-Windows, Network knowledge, MS- Office). • Availability to work irregular shifts, including evenings and weekends. • Ability to work independently as well as within a team. • Professional appearance and conduct, with good communication skills. • Willingness to travel extensively, including international travel. • Valid driver's license and passport. Our Vision Over 1000 sharp minds, about 60 nationalities, one goal: accelerating the world's transition to Responsible Manufacturing. Our proven technology, industrial 3D printing, has been extending the boundaries of manufacturing for over 30 years. We work globally networked and prefer to think outside the box - and we're looking for people who want to shape the future with us. EOS welcomes individuals from all backgrounds, ensuring equal opportunities without regard to race, color, religion, national origin, gender identity, expression, sexual orientation, age, or disability. At EOS, equity and inclusion are fundamental principles, and we believe in creating a work environment that is built on empathy, respect, and fairness. We are ALL IN. Our Vision: Over 1000 sharp minds, about 60 nationalities, one goal: accelerating the world's transition to Responsible Manufacturing. Our proven technology, industrial 3D printing, has been extending the boundaries of manufacturing for over 30 years. We work globally networked and prefer to think outside the box - and we're looking for people who want to shape the future with us. EOS welcomes individuals from all backgrounds, ensuring equal opportunities without regard to race, color, religion, national origin, gender identity, expression, sexual orientation, age, or disability. At EOS, equity and inclusion are fundamental principles, and we believe in creating a work environment that is built on empathy, respect, and fairness. We are ALL IN.

Join Our Team as a Field Service Technician Salary: $45,000-$65,000/year (based on certifications and experience) Signing Bonus | Company Vehicle | Laptop & Phone Provided PTO, Sick Leave, Floating Holidays | Summer Friday Hours Reprographic Products Group (RPG), a regional leader in wide-format printing and imaging technology (HP, Xerox, MUTOH, Fluid Color), is actively seeking a skilled Field Service Technician to join our team. If you're experienced, customer-focused, and ready to travel daily within our service area, this is your opportunity. ________________________________________ 🔧 Responsibilities: • Perform scheduled maintenance and emergency service for wide-format printing systems • Diagnose hardware/software issues and install firmware updates • Deliver an exceptional service experience to a professional client base (AEC, federal, and commercial accounts) • Complete service calls with attention to detail, documentation, and follow-through ________________________________________ ✅ Qualifications - Do Not Apply If You Do Not Meet These Requirements: • 2+ years of experience servicing HP, Xerox, MUTOH, or similar large-format printers • Valid driver's license with clean driving record • Strong computer literacy and troubleshooting skills • Ability to lift 50 lbs and perform physical tasks • Willing to travel daily within the assigned region ________________________________________ 🎁 Perks & Benefits: • Salary: $45,000-$65,000 depending on certifications and experience • Signing bonus • Company-provided vehicle, laptop, phone, and tools • PTO, sick leave, and floating holidays • Summer Friday Hours • Career growth opportunities in a growing regional technology services provider

Benefits: Competitive salary Free uniforms Training & development Do you have leadership experience and are looking for a new challenge? Join our team and take your career to the next level! Power washing experience is required for this role. As a Power Washing Field Service Lead Technician, you will be responsible for providing excellent service to our customers and completing jobs to the highest standards. With over 30 years of experience in the industry, we are committed to providing our team with the best tools, equipment, and training to ensure their success. We offer opportunities for career growth and advancement, as well as training and certification programs to help you develop your skills. We promote from within and offer a safe and secure working environment. With a variety of projects and tasks, you'll never be bored. Power Washing Field Service Lead Technician Responsibilities: Supervise your power washing team to ensure jobs are completed to the customer's satisfaction Utilize your experience to guide and mentor other team members Ensure that tasks are performed in a professional and efficient manner Abide by cleaning procedures checklists and ensure all jobs are completed to the highest standard Power Washing Field Service Lead Technician Benefits and Perks: Competitive salary package Opportunities for career growth and advancement Use of company tools, equipment, and vehicles Training and certification programs Promotion from within Safe and secure working environment Variety of projects and tasks Power Washing Field Service Lead Technician Qualifications: Minimum one year of proven leadership experience Ability to climb ladders and walk on roofs with confidence Ability to perform general labor and carry and lift up to 50lbs Valid Driver's License Join our team and be part of a dynamic company that values its employees and is committed to providing excellent service to our customers. Apply now and take the next step in your career as a Power Washing Field Service Manager! Compensation: $20.00 - $26.00 per hour Rolling Suds is a company that takes pride in delivering top-quality power washing services to both residential and commercial clients. With over 30 years of experience in the industry, we have built a strong reputation and a loyal customer base. We believe that our success is due to the relationships we have cultivated with our clients, our unwavering commitment to reliability, and our reputation for excellence. At Rolling Suds, we take a customer-first approach, and we are always looking for team members who share our values and commitment to providing exceptional service. If you're interested in joining our team and becoming a part of a company that values hard work, dedication, and excellence, then we invite you to explore our career opportunities today. At Rolling Suds, we invest heavily in our team members and provide extensive training and support. We believe in creating a culture of excellence, where employees are encouraged to develop their skills and take pride in their work. Whether you're a seasoned professional or just starting out, we offer opportunities for growth and advancement. Our team members are given the tools and resources they need to succeed, and we believe in recognizing and rewarding hard work and dedication. Join our team and become a part of a supportive and positive work environment that allows you to thrive. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Rolling Suds Corporate.

SUMMARY OF RESPONSIBILITIES: Conduct commissioning, testing, maintenance and repair of complex protective relaying schemes in generation, transmission, and distribution substation environments. Be able to operate various types of electrical test equipment including but not limited to Omicron, Doble, Vanguard, etc. This position requires an intermediate to strong level of understanding of interfacing software such as Test Universe, Protection Suite, AcSELerator, Wireshark, etc. Facilitate the retrofit, upgrade, and replacement projects for electrical controls, SCADA, DCS, and Power System Protection Equipment. ESSENTIAL JOB FUNCTIONS: Test over current/voltage, Directional, Distance, Impedance, Sync Check, Loss of field, reverse power, Multifunction relays etc. Perform function testing of substation control circuits on relay panels, transformers & circuit breaker controls. Perform isolation, setpoint testing, advanced logic testing, and scheme testing (reclosing, breaker failure, etc.) Perform end-to-end relay testing using Doble Protection Suite, RTS, or Test Universe software to verify communication assisted protection schemes. Perform installation, commissioning, testing and maintenance of protective relaying equipment, relaying schemes, DFR equipment, SCADA systems, distribution automation systems and associated communication equipment Assist in developing written standard commissioning, testing and maintenance procedures for protective relaying, DFR's, RTU's, IED's, Distribution Automation and associated communication systems. Generate customer report describing the problem found and correction action taken / proposed. Maintain a professional attitude when representing the company during phone or personal contact with outside vendors, customers or service providers etc. QUALIFICATIONS: Minimum of 5 years of field experience in commissioning, panel and equipment checkout, relay calibration, testing and repairing substation relaying and control schemes Experience is desirable in any of the following related areas: Substation commissioning; SCADA/Fault Data/SER/Integration-Automation equipment installation and testing Have a good understanding of various protocols (DNP3, Modbus, 8979, etc.). Have the ability to troubleshoot SCADA issues using various protocol test sets (Wireshark, ASE 2000, etc.) Experience in three phase power systems, power system protection, and control schemes Strong interpersonal and communication skills Proficient in Microsoft Office (Word, Excel and Outlook) Valid Driver's license and good driving record Must be able to distinguish color coding of wires, fiber optics or other materials required by essential job functions

Field Technician Salary: $18.50$24.50 No Experience Required Sign-On Bonus: $250 Join Our Team! Ready to build a career with meaningful growth, strong support, and great pay? Do you have the desire to work hard and build a stable career at an Employee-Owned company? Tired of not being able to pay your bills on time and differentiate yourselves from team members that dont perform like you do? If so, now is the time to join the Satellites Unlimited (SUI) family as a Field Technician! This entry-level satellite TV and broadband installer role is ideal for individuals with mechanical aptitude and good communication & customer service skills. * Quick Apply: Takes less than 10 minutes on our website * Watch what its like to be part of the team:

SUMMARY OF RESPONSIBILITIES: Conduct commissioning, testing, maintenance and repair of complex protective relaying schemes in generation, transmission, and distribution substation environments. Be able to operate various types of electrical test equipment including but not limited to Omicron, Doble, Vanguard, etc. This position requires an intermediate to strong level of understanding of interfacing software such as Test Universe, Protection Suite, AcSELerator, Wireshark, etc. Facilitate the retrofit, upgrade, and replacement projects for electrical controls, SCADA, DCS, and Power System Protection Equipment. ESSENTIAL JOB FUNCTIONS: Test over current/voltage, Directional, Distance, Impedance, Sync Check, Loss of field, reverse power, Multifunction relays etc. Perform function testing of substation control circuits on relay panels, transformers & circuit breaker controls. Perform isolation, setpoint testing, advanced logic testing, and scheme testing (reclosing, breaker failure, etc.) Perform end-to-end relay testing using Doble Protection Suite, RTS, or Test Universe software to verify communication assisted protection schemes. Perform installation, commissioning, testing and maintenance of protective relaying equipment, relaying schemes, DFR equipment, SCADA systems, distribution automation systems and associated communication equipment Assist in developing written standard commissioning, testing and maintenance procedures for protective relaying, DFR's, RTU's, IED's, Distribution Automation and associated communication systems. Generate customer report describing the problem found and correction action taken / proposed. Maintain a professional attitude when representing the company during phone or personal contact with outside vendors, customers or service providers etc. QUALIFICATIONS: Minimum of 5 years of field experience in commissioning, panel and equipment checkout, relay calibration, testing and repairing substation relaying and control schemes Experience is desirable in any of the following related areas: Substation commissioning; SCADA/Fault Data/SER/Integration-Automation equipment installation and testing Have a good understanding of various protocols (DNP3, Modbus, 8979, etc.). Have the ability to troubleshoot SCADA issues using various protocol test sets (Wireshark, ASE 2000, etc.) Experience in three phase power systems, power system protection, and control schemes Strong interpersonal and communication skills Proficient in Microsoft Office (Word, Excel and Outlook) Valid Driver's license and good driving record Must be able to distinguish color coding of wires, fiber optics or other materials required by essential job functions

SUMMARY OF RESPONSIBILITIES: Conduct commissioning, testing, maintenance and repair of complex protective relaying schemes in generation, transmission, and distribution substation environments. Be able to operate various types of electrical test equipment including but not limited to Omicron, Doble, Vanguard, etc. This position requires an intermediate to strong level of understanding of interfacing software such as Test Universe, Protection Suite, AcSELerator, Wireshark, etc. Facilitate the retrofit, upgrade, and replacement projects for electrical controls, SCADA, DCS, and Power System Protection Equipment. ESSENTIAL JOB FUNCTIONS: Test over current/voltage, Directional, Distance, Impedance, Sync Check, Loss of field, reverse power, Multifunction relays etc. Perform function testing of substation control circuits on relay panels, transformers & circuit breaker controls. Perform isolation, setpoint testing, advanced logic testing, and scheme testing (reclosing, breaker failure, etc.) Perform end-to-end relay testing using Doble Protection Suite, RTS, or Test Universe software to verify communication assisted protection schemes. Perform installation, commissioning, testing and maintenance of protective relaying equipment, relaying schemes, DFR equipment, SCADA systems, distribution automation systems and associated communication equipment Assist in developing written standard commissioning, testing and maintenance procedures for protective relaying, DFR's, RTU's, IED's, Distribution Automation and associated communication systems. Generate customer report describing the problem found and correction action taken / proposed. Maintain a professional attitude when representing the company during phone or personal contact with outside vendors, customers or service providers etc. QUALIFICATIONS: Minimum of 5 years of field experience in commissioning, panel and equipment checkout, relay calibration, testing and repairing substation relaying and control schemes Experience is desirable in any of the following related areas: Substation commissioning; SCADA/Fault Data/SER/Integration-Automation equipment installation and testing Have a good understanding of various protocols (DNP3, Modbus, 8979, etc.). Have the ability to troubleshoot SCADA issues using various protocol test sets (Wireshark, ASE 2000, etc.) Experience in three phase power systems, power system protection, and control schemes Strong interpersonal and communication skills Proficient in Microsoft Office (Word, Excel and Outlook) Valid Driver's license and good driving record Must be able to distinguish color coding of wires, fiber optics or other materials required by essential job functions

SUMMARY OF RESPONSIBILITIES: Conduct commissioning, testing, maintenance and repair of complex protective relaying schemes in generation, transmission, and distribution substation environments. Be able to operate various types of electrical test equipment including but not limited to Omicron, Doble, Vanguard, etc. This position requires an intermediate to strong level of understanding of interfacing software such as Test Universe, Protection Suite, AcSELerator, Wireshark, etc. Facilitate the retrofit, upgrade, and replacement projects for electrical controls, SCADA, DCS, and Power System Protection Equipment. ESSENTIAL JOB FUNCTIONS: Test over current/voltage, Directional, Distance, Impedance, Sync Check, Loss of field, reverse power, Multifunction relays etc. Perform function testing of substation control circuits on relay panels, transformers & circuit breaker controls. Perform isolation, setpoint testing, advanced logic testing, and scheme testing (reclosing, breaker failure, etc.) Perform end-to-end relay testing using Doble Protection Suite, RTS, or Test Universe software to verify communication assisted protection schemes. Perform installation, commissioning, testing and maintenance of protective relaying equipment, relaying schemes, DFR equipment, SCADA systems, distribution automation systems and associated communication equipment Assist in developing written standard commissioning, testing and maintenance procedures for protective relaying, DFR's, RTU's, IED's, Distribution Automation and associated communication systems. Generate customer report describing the problem found and correction action taken / proposed. Maintain a professional attitude when representing the company during phone or personal contact with outside vendors, customers or service providers etc. QUALIFICATIONS: Minimum of 5 years of field experience in commissioning, panel and equipment checkout, relay calibration, testing and repairing substation relaying and control schemes Experience is desirable in any of the following related areas: Substation commissioning; SCADA/Fault Data/SER/Integration-Automation equipment installation and testing Have a good understanding of various protocols (DNP3, Modbus, 8979, etc.). Have the ability to troubleshoot SCADA issues using various protocol test sets (Wireshark, ASE 2000, etc.) Experience in three phase power systems, power system protection, and control schemes Strong interpersonal and communication skills Proficient in Microsoft Office (Word, Excel and Outlook) Valid Driver's license and good driving record Must be able to distinguish color coding of wires, fiber optics or other materials required by essential job functions

SUMMARY OF RESPONSIBILITIES: Conduct commissioning, testing, maintenance and repair of complex protective relaying schemes in generation, transmission, and distribution substation environments. Be able to operate various types of electrical test equipment including but not limited to Omicron, Doble, Vanguard, etc. This position requires an intermediate to strong level of understanding of interfacing software such as Test Universe, Protection Suite, AcSELerator, Wireshark, etc. Facilitate the retrofit, upgrade, and replacement projects for electrical controls, SCADA, DCS, and Power System Protection Equipment. ESSENTIAL JOB FUNCTIONS: Test over current/voltage, Directional, Distance, Impedance, Sync Check, Loss of field, reverse power, Multifunction relays etc. Perform function testing of substation control circuits on relay panels, transformers & circuit breaker controls. Perform isolation, setpoint testing, advanced logic testing, and scheme testing (reclosing, breaker failure, etc.) Perform end-to-end relay testing using Doble Protection Suite, RTS, or Test Universe software to verify communication assisted protection schemes. Perform installation, commissioning, testing and maintenance of protective relaying equipment, relaying schemes, DFR equipment, SCADA systems, distribution automation systems and associated communication equipment Assist in developing written standard commissioning, testing and maintenance procedures for protective relaying, DFR's, RTU's, IED's, Distribution Automation and associated communication systems. Generate customer report describing the problem found and correction action taken / proposed. Maintain a professional attitude when representing the company during phone or personal contact with outside vendors, customers or service providers etc. QUALIFICATIONS: Minimum of 5 years of field experience in commissioning, panel and equipment checkout, relay calibration, testing and repairing substation relaying and control schemes Experience is desirable in any of the following related areas: Substation commissioning; SCADA/Fault Data/SER/Integration-Automation equipment installation and testing Have a good understanding of various protocols (DNP3, Modbus, 8979, etc.). Have the ability to troubleshoot SCADA issues using various protocol test sets (Wireshark, ASE 2000, etc.) Experience in three phase power systems, power system protection, and control schemes Strong interpersonal and communication skills Proficient in Microsoft Office (Word, Excel and Outlook) Valid Driver's license and good driving record Must be able to distinguish color coding of wires, fiber optics or other materials required by essential job functions

SUMMARY OF RESPONSIBILITIES: Conduct commissioning, testing, maintenance and repair of complex protective relaying schemes in generation, transmission, and distribution substation environments. Be able to operate various types of electrical test equipment including but not limited to Omicron, Doble, Vanguard, etc. This position requires an intermediate to strong level of understanding of interfacing software such as Test Universe, Protection Suite, AcSELerator, Wireshark, etc. Facilitate the retrofit, upgrade, and replacement projects for electrical controls, SCADA, DCS, and Power System Protection Equipment. ESSENTIAL JOB FUNCTIONS: Test over current/voltage, Directional, Distance, Impedance, Sync Check, Loss of field, reverse power, Multifunction relays etc. Perform function testing of substation control circuits on relay panels, transformers & circuit breaker controls. Perform isolation, setpoint testing, advanced logic testing, and scheme testing (reclosing, breaker failure, etc.) Perform end-to-end relay testing using Doble Protection Suite, RTS, or Test Universe software to verify communication assisted protection schemes. Perform installation, commissioning, testing and maintenance of protective relaying equipment, relaying schemes, DFR equipment, SCADA systems, distribution automation systems and associated communication equipment Assist in developing written standard commissioning, testing and maintenance procedures for protective relaying, DFR's, RTU's, IED's, Distribution Automation and associated communication systems. Generate customer report describing the problem found and correction action taken / proposed. Maintain a professional attitude when representing the company during phone or personal contact with outside vendors, customers or service providers etc. QUALIFICATIONS: Minimum of 5 years of field experience in commissioning, panel and equipment checkout, relay calibration, testing and repairing substation relaying and control schemes Experience is desirable in any of the following related areas: Substation commissioning; SCADA/Fault Data/SER/Integration-Automation equipment installation and testing Have a good understanding of various protocols (DNP3, Modbus, 8979, etc.). Have the ability to troubleshoot SCADA issues using various protocol test sets (Wireshark, ASE 2000, etc.) Experience in three phase power systems, power system protection, and control schemes Strong interpersonal and communication skills Proficient in Microsoft Office (Word, Excel and Outlook) Valid Driver's license and good driving record Must be able to distinguish color coding of wires, fiber optics or other materials required by essential job functions

SUMMARY OF RESPONSIBILITIES: Conduct commissioning, testing, maintenance and repair of complex protective relaying schemes in generation, transmission, and distribution substation environments. Be able to operate various types of electrical test equipment including but not limited to Omicron, Doble, Vanguard, etc. This position requires an intermediate to strong level of understanding of interfacing software such as Test Universe, Protection Suite, AcSELerator, Wireshark, etc. Facilitate the retrofit, upgrade, and replacement projects for electrical controls, SCADA, DCS, and Power System Protection Equipment. ESSENTIAL JOB FUNCTIONS: Test over current/voltage, Directional, Distance, Impedance, Sync Check, Loss of field, reverse power, Multifunction relays etc. Perform function testing of substation control circuits on relay panels, transformers & circuit breaker controls. Perform isolation, setpoint testing, advanced logic testing, and scheme testing (reclosing, breaker failure, etc.) Perform end-to-end relay testing using Doble Protection Suite, RTS, or Test Universe software to verify communication assisted protection schemes. Perform installation, commissioning, testing and maintenance of protective relaying equipment, relaying schemes, DFR equipment, SCADA systems, distribution automation systems and associated communication equipment Assist in developing written standard commissioning, testing and maintenance procedures for protective relaying, DFR's, RTU's, IED's, Distribution Automation and associated communication systems. Generate customer report describing the problem found and correction action taken / proposed. Maintain a professional attitude when representing the company during phone or personal contact with outside vendors, customers or service providers etc. QUALIFICATIONS: Minimum of 5 years of field experience in commissioning, panel and equipment checkout, relay calibration, testing and repairing substation relaying and control schemes Experience is desirable in any of the following related areas: Substation commissioning; SCADA/Fault Data/SER/Integration-Automation equipment installation and testing Have a good understanding of various protocols (DNP3, Modbus, 8979, etc.). Have the ability to troubleshoot SCADA issues using various protocol test sets (Wireshark, ASE 2000, etc.) Experience in three phase power systems, power system protection, and control schemes Strong interpersonal and communication skills Proficient in Microsoft Office (Word, Excel and Outlook) Valid Driver's license and good driving record Must be able to distinguish color coding of wires, fiber optics or other materials required by essential job functions

Axiom Space is collaborating with Astrolab, Inc. to develop a Lunar Terrain Vehicle (LTV) for future Artemis missions, combining Axiom's advanced AxEMU spacesuit with Astrolab's FLEX rover to enable groundbreaking scientific exploration on the Moon's surface. This partnership reflects Axiom Space's broader mission to build era-defining space infrastructure that drives exploration and fuels a vibrant space economy that will empower our civilization to transcend Earth for the benefit of every human, everywhere. Axiom Space fosters a work environment inclusive of all perspectives. We are the pioneers of commercial space, leading the transformation of low-Earth orbit into a global space marketplace. Our mission-driven team is seeking a bold and dynamic Senior CAD Technician who is fueled by high ownership, execution horsepower, growth mindset, and driven to understand our world, science/technology, and life itself, for the benefit of all on Earth and beyond. POSITION SUMMARY We are looking for a resilient, high-energy, experienced Senior CAD Technician to join Axiom's Lunar Terrain Vehicle (LTV) program in support of NASA's LTV Services (LTVS) contract in partnership with Astrolab. This role requires strong problem solving, organizational, time management, and communication skills. Experience in Extravehicular Activities (EVA) and Extravehicular Robotics (EVR) operations and hardware is desired. Employment in this role is contingent on Astrolab/Axiom being selected as a winner of NASA's LTVS contract award. KEY DUTIES & RESPONSIBILITIES Preparing and modifying 2D and 3D drawings using CAD software, mainly SolidWorks. Translating conceptual sketches, layouts, and design notes into accurate technical drawings. Maintaining drawing files, project folders, and version control in accordance with company standards. Reviewing and checking drawings for accuracy, completeness, and adherence to client and regulatory requirements. Coordinating with engineers, architects, and project managers to resolve design discrepancies. Assisting in preparing construction and fabrication documents, bills of materials, and as-built drawings. Supporting digital modeling and design visualization for proposals and client presentations. Performing additional job duties as assigned. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Education & Experience Associate degree or certification in Drafting, CAD Technology, Aerospace Engineering Technology, or related field (Bachelor's degree preferred) 5-10 years of experience as CAD technician or drafter in aerospace, defense or precision mechanical design environment Proficiency with SolidWorks Familiarity with 3D modeling, design standards, and file management systems Strong understanding of geometric tolerancing, dimensioning, and drawing conventions. Ability to read and interpret technical drawings, blueprints, and specifications. Grit Passion for space and the mission Entrepreneurial, growth mindset Perseverance Resourceful, adaptable Skills Executes priorities with precision and pace High EQ and ability to collaborate within teams and cross-functionally Tech-savvy in using systems and tools to move faster and smarter Excellent written and verbal communication skills Competencies Embody our core values of leadership, innovation, and teamwork. In addition, to perform the job successfully, an individual should demonstrate the following competencies: Accountability Sense of Urgency Extreme Ownership Execution and Delivery Efficiency Effectiveness WORK ENVIRONMENT Generally, an office environment, but can involve inside or outside work depending on the task. Requirements Must be able to complete a U.S. government background investigation. Management has the prerogative to select at any level for which the position is advertised. Proof of U.S. Citizenship or US Permanent Residency is a requirement for this position. Must be willing to work evenings and weekends as needed to meet critical project milestones. Physical Requirements Work may involve sitting or standing for extended periods (90% of the time) May require lifting and carrying up to 25 lbs. (5% of the time) Equipment and Machines Standard office equipment (PC, phone, printer, etc.) Axiom Space is proud to be an equal opportunity employer. Axiom Space does not discriminate on the basis of race, regional color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with disability, or other applicable legally protected characteristics.

Field Technician Salary: $18.50$24.50 No Experience Required Sign-On Bonus: $250 Join Our Team! Ready to build a career with meaningful growth, strong support, and great pay? Do you have the desire to work hard and build a stable career at an Employee-Owned company? Tired of not being able to pay your bills on time and differentiate yourselves from team members that dont perform like you do? If so, now is the time to join the Satellites Unlimited (SUI) family as a Field Technician! This entry-level satellite TV and broadband installer role is ideal for individuals with mechanical aptitude and good communication & customer service skills. * Quick Apply: Takes less than 10 minutes on our website * Watch what its like to be part of the team:

Field Technician Salary: $18.50$24.50 No Experience Required Sign-On Bonus: $250 Join Our Team! Ready to build a career with meaningful growth, strong support, and great pay? Do you have the desire to work hard and build a stable career at an Employee-Owned company? Tired of not being able to pay your bills on time and differentiate yourselves from team members that dont perform like you do? If so, now is the time to join the Satellites Unlimited (SUI) family as a Field Technician! This entry-level satellite TV and broadband installer role is ideal for individuals with mechanical aptitude and good communication & customer service skills. * Quick Apply: Takes less than 10 minutes on our website * Watch what its like to be part of the team: